diff --git a/cmake/modules/Catch2/Catch.cmake b/cmake/modules/Catch2/Catch.cmake new file mode 100644 index 000000000..0ffe978dc --- /dev/null +++ b/cmake/modules/Catch2/Catch.cmake @@ -0,0 +1,175 @@ +# Distributed under the OSI-approved BSD 3-Clause License. See accompanying +# file Copyright.txt or https://cmake.org/licensing for details. + +#[=======================================================================[.rst: +Catch +----- + +This module defines a function to help use the Catch test framework. + +The :command:`catch_discover_tests` discovers tests by asking the compiled test +executable to enumerate its tests. This does not require CMake to be re-run +when tests change. However, it may not work in a cross-compiling environment, +and setting test properties is less convenient. + +This command is intended to replace use of :command:`add_test` to register +tests, and will create a separate CTest test for each Catch test case. Note +that this is in some cases less efficient, as common set-up and tear-down logic +cannot be shared by multiple test cases executing in the same instance. +However, it provides more fine-grained pass/fail information to CTest, which is +usually considered as more beneficial. By default, the CTest test name is the +same as the Catch name; see also ``TEST_PREFIX`` and ``TEST_SUFFIX``. + +.. command:: catch_discover_tests + + Automatically add tests with CTest by querying the compiled test executable + for available tests:: + + catch_discover_tests(target + [TEST_SPEC arg1...] + [EXTRA_ARGS arg1...] + [WORKING_DIRECTORY dir] + [TEST_PREFIX prefix] + [TEST_SUFFIX suffix] + [PROPERTIES name1 value1...] + [TEST_LIST var] + ) + + ``catch_discover_tests`` sets up a post-build command on the test executable + that generates the list of tests by parsing the output from running the test + with the ``--list-test-names-only`` argument. This ensures that the full + list of tests is obtained. Since test discovery occurs at build time, it is + not necessary to re-run CMake when the list of tests changes. + However, it requires that :prop_tgt:`CROSSCOMPILING_EMULATOR` is properly set + in order to function in a cross-compiling environment. + + Additionally, setting properties on tests is somewhat less convenient, since + the tests are not available at CMake time. Additional test properties may be + assigned to the set of tests as a whole using the ``PROPERTIES`` option. If + more fine-grained test control is needed, custom content may be provided + through an external CTest script using the :prop_dir:`TEST_INCLUDE_FILES` + directory property. The set of discovered tests is made accessible to such a + script via the ``_TESTS`` variable. + + The options are: + + ``target`` + Specifies the Catch executable, which must be a known CMake executable + target. CMake will substitute the location of the built executable when + running the test. + + ``TEST_SPEC arg1...`` + Specifies test cases, wildcarded test cases, tags and tag expressions to + pass to the Catch executable with the ``--list-test-names-only`` argument. + + ``EXTRA_ARGS arg1...`` + Any extra arguments to pass on the command line to each test case. + + ``WORKING_DIRECTORY dir`` + Specifies the directory in which to run the discovered test cases. If this + option is not provided, the current binary directory is used. + + ``TEST_PREFIX prefix`` + Specifies a ``prefix`` to be prepended to the name of each discovered test + case. This can be useful when the same test executable is being used in + multiple calls to ``catch_discover_tests()`` but with different + ``TEST_SPEC`` or ``EXTRA_ARGS``. + + ``TEST_SUFFIX suffix`` + Similar to ``TEST_PREFIX`` except the ``suffix`` is appended to the name of + every discovered test case. Both ``TEST_PREFIX`` and ``TEST_SUFFIX`` may + be specified. + + ``PROPERTIES name1 value1...`` + Specifies additional properties to be set on all tests discovered by this + invocation of ``catch_discover_tests``. + + ``TEST_LIST var`` + Make the list of tests available in the variable ``var``, rather than the + default ``_TESTS``. This can be useful when the same test + executable is being used in multiple calls to ``catch_discover_tests()``. + Note that this variable is only available in CTest. + +#]=======================================================================] + +#------------------------------------------------------------------------------ +function(catch_discover_tests TARGET) + cmake_parse_arguments( + "" + "" + "TEST_PREFIX;TEST_SUFFIX;WORKING_DIRECTORY;TEST_LIST" + "TEST_SPEC;EXTRA_ARGS;PROPERTIES" + ${ARGN} + ) + + if(NOT _WORKING_DIRECTORY) + set(_WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}") + endif() + if(NOT _TEST_LIST) + set(_TEST_LIST ${TARGET}_TESTS) + endif() + + ## Generate a unique name based on the extra arguments + string(SHA1 args_hash "${_TEST_SPEC} ${_EXTRA_ARGS}") + string(SUBSTRING ${args_hash} 0 7 args_hash) + + # Define rule to generate test list for aforementioned test executable + set(ctest_include_file "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_include-${args_hash}.cmake") + set(ctest_tests_file "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_tests-${args_hash}.cmake") + get_property(crosscompiling_emulator + TARGET ${TARGET} + PROPERTY CROSSCOMPILING_EMULATOR + ) + add_custom_command( + TARGET ${TARGET} POST_BUILD + BYPRODUCTS "${ctest_tests_file}" + COMMAND "${CMAKE_COMMAND}" + -D "TEST_TARGET=${TARGET}" + -D "TEST_EXECUTABLE=$" + -D "TEST_EXECUTOR=${crosscompiling_emulator}" + -D "TEST_WORKING_DIR=${_WORKING_DIRECTORY}" + -D "TEST_SPEC=${_TEST_SPEC}" + -D "TEST_EXTRA_ARGS=${_EXTRA_ARGS}" + -D "TEST_PROPERTIES=${_PROPERTIES}" + -D "TEST_PREFIX='${_TEST_PREFIX}'" + -D "TEST_SUFFIX='${_TEST_SUFFIX}'" + -D "TEST_LIST=${_TEST_LIST}" + -D "CTEST_FILE=${ctest_tests_file}" + -P "${_CATCH_DISCOVER_TESTS_SCRIPT}" + VERBATIM + ) + + file(WRITE "${ctest_include_file}" + "if(EXISTS \"${ctest_tests_file}\")\n" + " include(\"${ctest_tests_file}\")\n" + "else()\n" + " add_test(${TARGET}_NOT_BUILT-${args_hash} ${TARGET}_NOT_BUILT-${args_hash})\n" + "endif()\n" + ) + + if(NOT ${CMAKE_VERSION} VERSION_LESS "3.10.0") + # Add discovered tests to directory TEST_INCLUDE_FILES + set_property(DIRECTORY + APPEND PROPERTY TEST_INCLUDE_FILES "${ctest_include_file}" + ) + else() + # Add discovered tests as directory TEST_INCLUDE_FILE if possible + get_property(test_include_file_set DIRECTORY PROPERTY TEST_INCLUDE_FILE SET) + if (NOT ${test_include_file_set}) + set_property(DIRECTORY + PROPERTY TEST_INCLUDE_FILE "${ctest_include_file}" + ) + else() + message(FATAL_ERROR + "Cannot set more than one TEST_INCLUDE_FILE" + ) + endif() + endif() + +endfunction() + +############################################################################### + +set(_CATCH_DISCOVER_TESTS_SCRIPT + ${CMAKE_CURRENT_LIST_DIR}/CatchAddTests.cmake +) diff --git a/cmake/modules/Catch2/CatchAddTests.cmake b/cmake/modules/Catch2/CatchAddTests.cmake new file mode 100644 index 000000000..ca5ebc17e --- /dev/null +++ b/cmake/modules/Catch2/CatchAddTests.cmake @@ -0,0 +1,106 @@ +# Distributed under the OSI-approved BSD 3-Clause License. See accompanying +# file Copyright.txt or https://cmake.org/licensing for details. + +set(prefix "${TEST_PREFIX}") +set(suffix "${TEST_SUFFIX}") +set(spec ${TEST_SPEC}) +set(extra_args ${TEST_EXTRA_ARGS}) +set(properties ${TEST_PROPERTIES}) +set(script) +set(suite) +set(tests) + +function(add_command NAME) + set(_args "") + foreach(_arg ${ARGN}) + if(_arg MATCHES "[^-./:a-zA-Z0-9_]") + set(_args "${_args} [==[${_arg}]==]") # form a bracket_argument + else() + set(_args "${_args} ${_arg}") + endif() + endforeach() + set(script "${script}${NAME}(${_args})\n" PARENT_SCOPE) +endfunction() + +macro(_add_catch_test_labels LINE) + # convert to list of tags + string(REPLACE "][" "]\\;[" tags ${line}) + + add_command( + set_tests_properties "${prefix}${test}${suffix}" + PROPERTIES + LABELS "${tags}" + ) +endmacro() + +macro(_add_catch_test LINE) + set(test ${line}) + # use escape commas to handle properly test cases with commans inside the name + string(REPLACE "," "\\," test_name ${test}) + # ...and add to script + add_command( + add_test "${prefix}${test}${suffix}" + ${TEST_EXECUTOR} + "${TEST_EXECUTABLE}" + "${test_name}" + ${extra_args} + ) + + add_command( + set_tests_properties "${prefix}${test}${suffix}" + PROPERTIES + WORKING_DIRECTORY "${TEST_WORKING_DIR}" + ${properties} + ) + list(APPEND tests "${prefix}${test}${suffix}") +endmacro() + +# Run test executable to get list of available tests +if(NOT EXISTS "${TEST_EXECUTABLE}") + message(FATAL_ERROR + "Specified test executable '${TEST_EXECUTABLE}' does not exist" + ) +endif() +execute_process( + COMMAND ${TEST_EXECUTOR} "${TEST_EXECUTABLE}" ${spec} --list-tests + OUTPUT_VARIABLE output + RESULT_VARIABLE result +) +# Catch --list-test-names-only reports the number of tests, so 0 is... surprising +if(${result} EQUAL 0) + message(WARNING + "Test executable '${TEST_EXECUTABLE}' contains no tests!\n" + ) +elseif(${result} LESS 0) + message(FATAL_ERROR + "Error running test executable '${TEST_EXECUTABLE}':\n" + " Result: ${result}\n" + " Output: ${output}\n" + ) +endif() + +string(REPLACE "\n" ";" output "${output}") +set(test) +set(tags_regex "(\\[([^\\[]*)\\])+$") + +# Parse output +foreach(line ${output}) + # lines without leading whitespaces are catch output not tests + if(${line} MATCHES "^[ \t]+") + # strip leading spaces and tabs + string(REGEX REPLACE "^[ \t]+" "" line ${line}) + + if(${line} MATCHES "${tags_regex}") + _add_catch_test_labels(${line}) + else() + _add_catch_test(${line}) + endif() + endif() +endforeach() + +# Create a list of all discovered tests, which users may use to e.g. set +# properties on the tests +add_command(set ${TEST_LIST} ${tests}) + +# Write CTest script +file(WRITE "${CTEST_FILE}" "${script}") diff --git a/cmake/modules/Catch2/ParseAndAddCatchTests.cmake b/cmake/modules/Catch2/ParseAndAddCatchTests.cmake new file mode 100644 index 000000000..925d93281 --- /dev/null +++ b/cmake/modules/Catch2/ParseAndAddCatchTests.cmake @@ -0,0 +1,225 @@ +#==================================================================================================# +# supported macros # +# - TEST_CASE, # +# - SCENARIO, # +# - TEST_CASE_METHOD, # +# - CATCH_TEST_CASE, # +# - CATCH_SCENARIO, # +# - CATCH_TEST_CASE_METHOD. # +# # +# Usage # +# 1. make sure this module is in the path or add this otherwise: # +# set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake.modules/") # +# 2. make sure that you've enabled testing option for the project by the call: # +# enable_testing() # +# 3. add the lines to the script for testing target (sample CMakeLists.txt): # +# project(testing_target) # +# set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake.modules/") # +# enable_testing() # +# # +# find_path(CATCH_INCLUDE_DIR "catch.hpp") # +# include_directories(${INCLUDE_DIRECTORIES} ${CATCH_INCLUDE_DIR}) # +# # +# file(GLOB SOURCE_FILES "*.cpp") # +# add_executable(${PROJECT_NAME} ${SOURCE_FILES}) # +# # +# include(ParseAndAddCatchTests) # +# ParseAndAddCatchTests(${PROJECT_NAME}) # +# # +# The following variables affect the behavior of the script: # +# # +# PARSE_CATCH_TESTS_VERBOSE (Default OFF) # +# -- enables debug messages # +# PARSE_CATCH_TESTS_NO_HIDDEN_TESTS (Default OFF) # +# -- excludes tests marked with [!hide], [.] or [.foo] tags # +# PARSE_CATCH_TESTS_ADD_FIXTURE_IN_TEST_NAME (Default ON) # +# -- adds fixture class name to the test name # +# PARSE_CATCH_TESTS_ADD_TARGET_IN_TEST_NAME (Default ON) # +# -- adds cmake target name to the test name # +# PARSE_CATCH_TESTS_ADD_TO_CONFIGURE_DEPENDS (Default OFF) # +# -- causes CMake to rerun when file with tests changes so that new tests will be discovered # +# # +# One can also set (locally) the optional variable OptionalCatchTestLauncher to precise the way # +# a test should be run. For instance to use test MPI, one can write # +# set(OptionalCatchTestLauncher ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} ${NUMPROC}) # +# just before calling this ParseAndAddCatchTests function # +# # +# The AdditionalCatchParameters optional variable can be used to pass extra argument to the test # +# command. For example, to include successful tests in the output, one can write # +# set(AdditionalCatchParameters --success) # +# # +# After the script, the ParseAndAddCatchTests_TESTS property for the target, and for each source # +# file in the target is set, and contains the list of the tests extracted from that target, or # +# from that file. This is useful, for example to add further labels or properties to the tests. # +# # +#==================================================================================================# + +if (CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.8) + message(FATAL_ERROR "ParseAndAddCatchTests requires CMake 2.8.8 or newer") +endif() + +option(PARSE_CATCH_TESTS_VERBOSE "Print Catch to CTest parser debug messages" OFF) +option(PARSE_CATCH_TESTS_NO_HIDDEN_TESTS "Exclude tests with [!hide], [.] or [.foo] tags" OFF) +option(PARSE_CATCH_TESTS_ADD_FIXTURE_IN_TEST_NAME "Add fixture class name to the test name" ON) +option(PARSE_CATCH_TESTS_ADD_TARGET_IN_TEST_NAME "Add target name to the test name" ON) +option(PARSE_CATCH_TESTS_ADD_TO_CONFIGURE_DEPENDS "Add test file to CMAKE_CONFIGURE_DEPENDS property" OFF) + +function(ParseAndAddCatchTests_PrintDebugMessage) + if(PARSE_CATCH_TESTS_VERBOSE) + message(STATUS "ParseAndAddCatchTests: ${ARGV}") + endif() +endfunction() + +# This removes the contents between +# - block comments (i.e. /* ... */) +# - full line comments (i.e. // ... ) +# contents have been read into '${CppCode}'. +# !keep partial line comments +function(ParseAndAddCatchTests_RemoveComments CppCode) + string(ASCII 2 CMakeBeginBlockComment) + string(ASCII 3 CMakeEndBlockComment) + string(REGEX REPLACE "/\\*" "${CMakeBeginBlockComment}" ${CppCode} "${${CppCode}}") + string(REGEX REPLACE "\\*/" "${CMakeEndBlockComment}" ${CppCode} "${${CppCode}}") + string(REGEX REPLACE "${CMakeBeginBlockComment}[^${CMakeEndBlockComment}]*${CMakeEndBlockComment}" "" ${CppCode} "${${CppCode}}") + string(REGEX REPLACE "\n[ \t]*//+[^\n]+" "\n" ${CppCode} "${${CppCode}}") + + set(${CppCode} "${${CppCode}}" PARENT_SCOPE) +endfunction() + +# Worker function +function(ParseAndAddCatchTests_ParseFile SourceFile TestTarget) + # If SourceFile is an object library, do not scan it (as it is not a file). Exit without giving a warning about a missing file. + if(SourceFile MATCHES "\\\$") + ParseAndAddCatchTests_PrintDebugMessage("Detected OBJECT library: ${SourceFile} this will not be scanned for tests.") + return() + endif() + # According to CMake docs EXISTS behavior is well-defined only for full paths. + get_filename_component(SourceFile ${SourceFile} ABSOLUTE) + if(NOT EXISTS ${SourceFile}) + message(WARNING "Cannot find source file: ${SourceFile}") + return() + endif() + ParseAndAddCatchTests_PrintDebugMessage("parsing ${SourceFile}") + file(STRINGS ${SourceFile} Contents NEWLINE_CONSUME) + + # Remove block and fullline comments + ParseAndAddCatchTests_RemoveComments(Contents) + + # Find definition of test names + string(REGEX MATCHALL "[ \t]*(CATCH_)?(TEST_CASE_METHOD|SCENARIO|TEST_CASE)[ \t]*\\([^\)]+\\)+[ \t\n]*{+[ \t]*(//[^\n]*[Tt][Ii][Mm][Ee][Oo][Uu][Tt][ \t]*[0-9]+)*" Tests "${Contents}") + + if(PARSE_CATCH_TESTS_ADD_TO_CONFIGURE_DEPENDS AND Tests) + ParseAndAddCatchTests_PrintDebugMessage("Adding ${SourceFile} to CMAKE_CONFIGURE_DEPENDS property") + set_property( + DIRECTORY + APPEND + PROPERTY CMAKE_CONFIGURE_DEPENDS ${SourceFile} + ) + endif() + + foreach(TestName ${Tests}) + # Strip newlines + string(REGEX REPLACE "\\\\\n|\n" "" TestName "${TestName}") + + # Get test type and fixture if applicable + string(REGEX MATCH "(CATCH_)?(TEST_CASE_METHOD|SCENARIO|TEST_CASE)[ \t]*\\([^,^\"]*" TestTypeAndFixture "${TestName}") + string(REGEX MATCH "(CATCH_)?(TEST_CASE_METHOD|SCENARIO|TEST_CASE)" TestType "${TestTypeAndFixture}") + string(REGEX REPLACE "${TestType}\\([ \t]*" "" TestFixture "${TestTypeAndFixture}") + + # Get string parts of test definition + string(REGEX MATCHALL "\"+([^\\^\"]|\\\\\")+\"+" TestStrings "${TestName}") + + # Strip wrapping quotation marks + string(REGEX REPLACE "^\"(.*)\"$" "\\1" TestStrings "${TestStrings}") + string(REPLACE "\";\"" ";" TestStrings "${TestStrings}") + + # Validate that a test name and tags have been provided + list(LENGTH TestStrings TestStringsLength) + if(TestStringsLength GREATER 2 OR TestStringsLength LESS 1) + message(FATAL_ERROR "You must provide a valid test name and tags for all tests in ${SourceFile}") + endif() + + # Assign name and tags + list(GET TestStrings 0 Name) + if("${TestType}" STREQUAL "SCENARIO") + set(Name "Scenario: ${Name}") + endif() + if(PARSE_CATCH_TESTS_ADD_FIXTURE_IN_TEST_NAME AND TestFixture) + set(CTestName "${TestFixture}:${Name}") + else() + set(CTestName "${Name}") + endif() + if(PARSE_CATCH_TESTS_ADD_TARGET_IN_TEST_NAME) + set(CTestName "${TestTarget}:${CTestName}") + endif() + # add target to labels to enable running all tests added from this target + set(Labels ${TestTarget}) + if(TestStringsLength EQUAL 2) + list(GET TestStrings 1 Tags) + string(TOLOWER "${Tags}" Tags) + # remove target from labels if the test is hidden + if("${Tags}" MATCHES ".*\\[!?(hide|\\.)\\].*") + list(REMOVE_ITEM Labels ${TestTarget}) + endif() + string(REPLACE "]" ";" Tags "${Tags}") + string(REPLACE "[" "" Tags "${Tags}") + else() + # unset tags variable from previous loop + unset(Tags) + endif() + + list(APPEND Labels ${Tags}) + + set(HiddenTagFound OFF) + foreach(label ${Labels}) + string(REGEX MATCH "^!hide|^\\." result ${label}) + if(result) + set(HiddenTagFound ON) + break() + endif(result) + endforeach(label) + if(PARSE_CATCH_TESTS_NO_HIDDEN_TESTS AND ${HiddenTagFound} AND ${CMAKE_VERSION} VERSION_LESS "3.9") + ParseAndAddCatchTests_PrintDebugMessage("Skipping test \"${CTestName}\" as it has [!hide], [.] or [.foo] label") + else() + ParseAndAddCatchTests_PrintDebugMessage("Adding test \"${CTestName}\"") + if(Labels) + ParseAndAddCatchTests_PrintDebugMessage("Setting labels to ${Labels}") + endif() + + # Escape commas in the test spec + string(REPLACE "," "\\," Name ${Name}) + + # Add the test and set its properties + add_test(NAME "\"${CTestName}\"" COMMAND ${OptionalCatchTestLauncher} $ ${Name} ${AdditionalCatchParameters}) + # Old CMake versions do not document VERSION_GREATER_EQUAL, so we use VERSION_GREATER with 3.8 instead + if(PARSE_CATCH_TESTS_NO_HIDDEN_TESTS AND ${HiddenTagFound} AND ${CMAKE_VERSION} VERSION_GREATER "3.8") + ParseAndAddCatchTests_PrintDebugMessage("Setting DISABLED test property") + set_tests_properties("\"${CTestName}\"" PROPERTIES DISABLED ON) + else() + set_tests_properties("\"${CTestName}\"" PROPERTIES FAIL_REGULAR_EXPRESSION "No tests ran" + LABELS "${Labels}") + endif() + set_property( + TARGET ${TestTarget} + APPEND + PROPERTY ParseAndAddCatchTests_TESTS "\"${CTestName}\"") + set_property( + SOURCE ${SourceFile} + APPEND + PROPERTY ParseAndAddCatchTests_TESTS "\"${CTestName}\"") + endif() + + + endforeach() +endfunction() + +# entry point +function(ParseAndAddCatchTests TestTarget) + ParseAndAddCatchTests_PrintDebugMessage("Started parsing ${TestTarget}") + get_target_property(SourceFiles ${TestTarget} SOURCES) + ParseAndAddCatchTests_PrintDebugMessage("Found the following sources: ${SourceFiles}") + foreach(SourceFile ${SourceFiles}) + ParseAndAddCatchTests_ParseFile(${SourceFile} ${TestTarget}) + endforeach() + ParseAndAddCatchTests_PrintDebugMessage("Finished parsing ${TestTarget}") +endfunction() diff --git a/src/libnest2d/CMakeLists.txt b/src/libnest2d/CMakeLists.txt index 587b814b2..0d091c171 100644 --- a/src/libnest2d/CMakeLists.txt +++ b/src/libnest2d/CMakeLists.txt @@ -13,11 +13,6 @@ set(CMAKE_CXX_STANDARD_REQUIRED) # Add our own cmake module path. list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake_modules/) -option(LIBNEST2D_UNITTESTS "If enabled, googletest framework will be downloaded - and the provided unit tests will be included in the build." OFF) - -option(LIBNEST2D_BUILD_EXAMPLES "If enabled, examples will be built." OFF) - option(LIBNEST2D_HEADER_ONLY "If enabled static library will not be built." ON) set(GEOMETRY_BACKENDS clipper boost eigen) @@ -109,26 +104,3 @@ if(NOT LIBNEST2D_HEADER_ONLY) target_link_libraries(${LIBNAME} PUBLIC libnest2d) target_compile_definitions(${LIBNAME} PUBLIC LIBNEST2D_STATIC) endif() - -if(LIBNEST2D_BUILD_EXAMPLES) - - add_executable(example examples/main.cpp - # tools/libnfpglue.hpp - # tools/libnfpglue.cpp - tools/nfp_svgnest.hpp - tools/nfp_svgnest_glue.hpp - tools/svgtools.hpp - tests/printer_parts.cpp - tests/printer_parts.h - ) - - if(NOT LIBNEST2D_HEADER_ONLY) - target_link_libraries(example ${LIBNAME}) - else() - target_link_libraries(example libnest2d) - endif() -endif() - -if(LIBNEST2D_UNITTESTS) - add_subdirectory(${PROJECT_SOURCE_DIR}/tests) -endif() diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt index fcd70d636..2776a129b 100644 --- a/tests/CMakeLists.txt +++ b/tests/CMakeLists.txt @@ -1,16 +1,33 @@ # TODO Add individual tests as executables in separate directories # add_subirectory() -find_package(GTest REQUIRED) - set(TEST_DATA_DIR ${CMAKE_CURRENT_SOURCE_DIR}/data) file(TO_NATIVE_PATH "${TEST_DATA_DIR}" TEST_DATA_DIR) +add_library(Catch2 INTERFACE) +list (APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake/modules/Catch2) +target_include_directories(Catch2 INTERFACE ${CMAKE_CURRENT_LIST_DIR}) +add_library(Catch2::Catch2 ALIAS Catch2) +include(Catch) + +add_library(test_catch2_common INTERFACE) +target_compile_definitions(test_catch2_common INTERFACE TEST_DATA_DIR=R"\(${TEST_DATA_DIR}\)") +target_link_libraries(test_catch2_common INTERFACE Catch2::Catch2) + add_library(test_common INTERFACE) -target_compile_definitions(test_common INTERFACE TEST_DATA_DIR=R"\(${TEST_DATA_DIR}\)") -target_link_libraries(test_common INTERFACE GTest::GTest GTest::Main) if (APPLE) target_link_libraries(test_common INTERFACE "-liconv -framework IOKit" "-framework CoreFoundation" -lc++) endif() +target_link_libraries(test_common INTERFACE test_catch2_common) + +# DEPRECATED: +find_package(GTest REQUIRED) +add_library(test_gtest_common INTERFACE) +target_compile_definitions(test_gtest_common INTERFACE TEST_DATA_DIR=R"\(${TEST_DATA_DIR}\)") +target_link_libraries(test_gtest_common INTERFACE GTest::GTest GTest::Main) + +add_subdirectory(libnest2d) +#add_subdirectory(timeutils) add_subdirectory(sla_print) + diff --git a/tests/catch2/LICENSE.txt b/tests/catch2/LICENSE.txt new file mode 100644 index 000000000..36b7cd93c --- /dev/null +++ b/tests/catch2/LICENSE.txt @@ -0,0 +1,23 @@ +Boost Software License - Version 1.0 - August 17th, 2003 + +Permission is hereby granted, free of charge, to any person or organization +obtaining a copy of the software and accompanying documentation covered by +this license (the "Software") to use, reproduce, display, distribute, +execute, and transmit the Software, and to prepare derivative works of the +Software, and to permit third-parties to whom the Software is furnished to +do so, all subject to the following: + +The copyright notices in the Software and this entire statement, including +the above license grant, this restriction and the following disclaimer, +must be included in all copies of the Software, in whole or in part, and +all derivative works of the Software, unless such copies or derivative +works are solely in the form of machine-executable object code generated by +a source language processor. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT +SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE +FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. diff --git a/tests/catch2/VERSION.txt b/tests/catch2/VERSION.txt new file mode 100644 index 000000000..587a8125d --- /dev/null +++ b/tests/catch2/VERSION.txt @@ -0,0 +1,2 @@ +2.9.2 g2c869e1 + diff --git a/tests/catch2/catch.hpp b/tests/catch2/catch.hpp new file mode 100644 index 000000000..5feb2a4be --- /dev/null +++ b/tests/catch2/catch.hpp @@ -0,0 +1,17075 @@ +/* + * Catch v2.9.2 + * Generated: 2019-08-08 13:35:12.279703 + * ---------------------------------------------------------- + * This file has been merged from multiple headers. Please don't edit it directly + * Copyright (c) 2019 Two Blue Cubes Ltd. All rights reserved. + * + * Distributed under the Boost Software License, Version 1.0. (See accompanying + * file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) + */ +#ifndef TWOBLUECUBES_SINGLE_INCLUDE_CATCH_HPP_INCLUDED +#define TWOBLUECUBES_SINGLE_INCLUDE_CATCH_HPP_INCLUDED +// start catch.hpp + + +#define CATCH_VERSION_MAJOR 2 +#define CATCH_VERSION_MINOR 9 +#define CATCH_VERSION_PATCH 2 + +#ifdef __clang__ +# pragma clang system_header +#elif defined __GNUC__ +# pragma GCC system_header +#endif + +// start catch_suppress_warnings.h + +#ifdef __clang__ +# ifdef __ICC // icpc defines the __clang__ macro +# pragma warning(push) +# pragma warning(disable: 161 1682) +# else // __ICC +# pragma clang diagnostic push +# pragma clang diagnostic ignored "-Wpadded" +# pragma clang diagnostic ignored "-Wswitch-enum" +# pragma clang diagnostic ignored "-Wcovered-switch-default" +# endif +#elif defined __GNUC__ + // Because REQUIREs trigger GCC's -Wparentheses, and because still + // supported version of g++ have only buggy support for _Pragmas, + // Wparentheses have to be suppressed globally. +# pragma GCC diagnostic ignored "-Wparentheses" // See #674 for details + +# pragma GCC diagnostic push +# pragma GCC diagnostic ignored "-Wunused-variable" +# pragma GCC diagnostic ignored "-Wpadded" +#endif +// end catch_suppress_warnings.h +#if defined(CATCH_CONFIG_MAIN) || defined(CATCH_CONFIG_RUNNER) +# define CATCH_IMPL +# define CATCH_CONFIG_ALL_PARTS +#endif + +// In the impl file, we want to have access to all parts of the headers +// Can also be used to sanely support PCHs +#if defined(CATCH_CONFIG_ALL_PARTS) +# define CATCH_CONFIG_EXTERNAL_INTERFACES +# if defined(CATCH_CONFIG_DISABLE_MATCHERS) +# undef CATCH_CONFIG_DISABLE_MATCHERS +# endif +# if !defined(CATCH_CONFIG_ENABLE_CHRONO_STRINGMAKER) +# define CATCH_CONFIG_ENABLE_CHRONO_STRINGMAKER +# endif +#endif + +#if !defined(CATCH_CONFIG_IMPL_ONLY) +// start catch_platform.h + +#ifdef __APPLE__ +# include +# if TARGET_OS_OSX == 1 +# define CATCH_PLATFORM_MAC +# elif TARGET_OS_IPHONE == 1 +# define CATCH_PLATFORM_IPHONE +# endif + +#elif defined(linux) || defined(__linux) || defined(__linux__) +# define CATCH_PLATFORM_LINUX + +#elif defined(WIN32) || defined(__WIN32__) || defined(_WIN32) || defined(_MSC_VER) || defined(__MINGW32__) +# define CATCH_PLATFORM_WINDOWS +#endif + +// end catch_platform.h + +#ifdef CATCH_IMPL +# ifndef CLARA_CONFIG_MAIN +# define CLARA_CONFIG_MAIN_NOT_DEFINED +# define CLARA_CONFIG_MAIN +# endif +#endif + +// start catch_user_interfaces.h + +namespace Catch { + unsigned int rngSeed(); +} + +// end catch_user_interfaces.h +// start catch_tag_alias_autoregistrar.h + +// start catch_common.h + +// start catch_compiler_capabilities.h + +// Detect a number of compiler features - by compiler +// The following features are defined: +// +// CATCH_CONFIG_COUNTER : is the __COUNTER__ macro supported? +// CATCH_CONFIG_WINDOWS_SEH : is Windows SEH supported? +// CATCH_CONFIG_POSIX_SIGNALS : are POSIX signals supported? +// CATCH_CONFIG_DISABLE_EXCEPTIONS : Are exceptions enabled? +// **************** +// Note to maintainers: if new toggles are added please document them +// in configuration.md, too +// **************** + +// In general each macro has a _NO_ form +// (e.g. CATCH_CONFIG_NO_POSIX_SIGNALS) which disables the feature. +// Many features, at point of detection, define an _INTERNAL_ macro, so they +// can be combined, en-mass, with the _NO_ forms later. + +#ifdef __cplusplus + +# if (__cplusplus >= 201402L) || (defined(_MSVC_LANG) && _MSVC_LANG >= 201402L) +# define CATCH_CPP14_OR_GREATER +# endif + +# if (__cplusplus >= 201703L) || (defined(_MSVC_LANG) && _MSVC_LANG >= 201703L) +# define CATCH_CPP17_OR_GREATER +# endif + +#endif + +#if defined(CATCH_CPP17_OR_GREATER) +# define CATCH_INTERNAL_CONFIG_CPP17_UNCAUGHT_EXCEPTIONS +#endif + +#ifdef __clang__ + +# define CATCH_INTERNAL_SUPPRESS_GLOBALS_WARNINGS \ + _Pragma( "clang diagnostic push" ) \ + _Pragma( "clang diagnostic ignored \"-Wexit-time-destructors\"" ) \ + _Pragma( "clang diagnostic ignored \"-Wglobal-constructors\"") +# define CATCH_INTERNAL_UNSUPPRESS_GLOBALS_WARNINGS \ + _Pragma( "clang diagnostic pop" ) + +# define CATCH_INTERNAL_SUPPRESS_PARENTHESES_WARNINGS \ + _Pragma( "clang diagnostic push" ) \ + _Pragma( "clang diagnostic ignored \"-Wparentheses\"" ) +# define CATCH_INTERNAL_UNSUPPRESS_PARENTHESES_WARNINGS \ + _Pragma( "clang diagnostic pop" ) + +# define CATCH_INTERNAL_SUPPRESS_UNUSED_WARNINGS \ + _Pragma( "clang diagnostic push" ) \ + _Pragma( "clang diagnostic ignored \"-Wunused-variable\"" ) +# define CATCH_INTERNAL_UNSUPPRESS_UNUSED_WARNINGS \ + _Pragma( "clang diagnostic pop" ) + +# define CATCH_INTERNAL_SUPPRESS_ZERO_VARIADIC_WARNINGS \ + _Pragma( "clang diagnostic push" ) \ + _Pragma( "clang diagnostic ignored \"-Wgnu-zero-variadic-macro-arguments\"" ) +# define CATCH_INTERNAL_UNSUPPRESS_ZERO_VARIADIC_WARNINGS \ + _Pragma( "clang diagnostic pop" ) + +#endif // __clang__ + +//////////////////////////////////////////////////////////////////////////////// +// Assume that non-Windows platforms support posix signals by default +#if !defined(CATCH_PLATFORM_WINDOWS) + #define CATCH_INTERNAL_CONFIG_POSIX_SIGNALS +#endif + +//////////////////////////////////////////////////////////////////////////////// +// We know some environments not to support full POSIX signals +#if defined(__CYGWIN__) || defined(__QNX__) || defined(__EMSCRIPTEN__) || defined(__DJGPP__) + #define CATCH_INTERNAL_CONFIG_NO_POSIX_SIGNALS +#endif + +#ifdef __OS400__ +# define CATCH_INTERNAL_CONFIG_NO_POSIX_SIGNALS +# define CATCH_CONFIG_COLOUR_NONE +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Android somehow still does not support std::to_string +#if defined(__ANDROID__) +# define CATCH_INTERNAL_CONFIG_NO_CPP11_TO_STRING +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Not all Windows environments support SEH properly +#if defined(__MINGW32__) +# define CATCH_INTERNAL_CONFIG_NO_WINDOWS_SEH +#endif + +//////////////////////////////////////////////////////////////////////////////// +// PS4 +#if defined(__ORBIS__) +# define CATCH_INTERNAL_CONFIG_NO_NEW_CAPTURE +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Cygwin +#ifdef __CYGWIN__ + +// Required for some versions of Cygwin to declare gettimeofday +// see: http://stackoverflow.com/questions/36901803/gettimeofday-not-declared-in-this-scope-cygwin +# define _BSD_SOURCE +// some versions of cygwin (most) do not support std::to_string. Use the libstd check. +// https://gcc.gnu.org/onlinedocs/gcc-4.8.2/libstdc++/api/a01053_source.html line 2812-2813 +# if !((__cplusplus >= 201103L) && defined(_GLIBCXX_USE_C99) \ + && !defined(_GLIBCXX_HAVE_BROKEN_VSWPRINTF)) + +# define CATCH_INTERNAL_CONFIG_NO_CPP11_TO_STRING + +# endif +#endif // __CYGWIN__ + +//////////////////////////////////////////////////////////////////////////////// +// Visual C++ +#ifdef _MSC_VER + +# if _MSC_VER >= 1900 // Visual Studio 2015 or newer +# define CATCH_INTERNAL_CONFIG_CPP17_UNCAUGHT_EXCEPTIONS +# endif + +// Universal Windows platform does not support SEH +// Or console colours (or console at all...) +# if defined(WINAPI_FAMILY) && (WINAPI_FAMILY == WINAPI_FAMILY_APP) +# define CATCH_CONFIG_COLOUR_NONE +# else +# define CATCH_INTERNAL_CONFIG_WINDOWS_SEH +# endif + +// MSVC traditional preprocessor needs some workaround for __VA_ARGS__ +// _MSVC_TRADITIONAL == 0 means new conformant preprocessor +// _MSVC_TRADITIONAL == 1 means old traditional non-conformant preprocessor +# if !defined(_MSVC_TRADITIONAL) || (defined(_MSVC_TRADITIONAL) && _MSVC_TRADITIONAL) +# define CATCH_INTERNAL_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR +# endif +#endif // _MSC_VER + +#if defined(_REENTRANT) || defined(_MSC_VER) +// Enable async processing, as -pthread is specified or no additional linking is required +# define CATCH_INTERNAL_CONFIG_USE_ASYNC +#endif // _MSC_VER + +//////////////////////////////////////////////////////////////////////////////// +// Check if we are compiled with -fno-exceptions or equivalent +#if defined(__EXCEPTIONS) || defined(__cpp_exceptions) || defined(_CPPUNWIND) +# define CATCH_INTERNAL_CONFIG_EXCEPTIONS_ENABLED +#endif + +//////////////////////////////////////////////////////////////////////////////// +// DJGPP +#ifdef __DJGPP__ +# define CATCH_INTERNAL_CONFIG_NO_WCHAR +#endif // __DJGPP__ + +//////////////////////////////////////////////////////////////////////////////// +// Embarcadero C++Build +#if defined(__BORLANDC__) + #define CATCH_INTERNAL_CONFIG_POLYFILL_ISNAN +#endif + +//////////////////////////////////////////////////////////////////////////////// + +// Use of __COUNTER__ is suppressed during code analysis in +// CLion/AppCode 2017.2.x and former, because __COUNTER__ is not properly +// handled by it. +// Otherwise all supported compilers support COUNTER macro, +// but user still might want to turn it off +#if ( !defined(__JETBRAINS_IDE__) || __JETBRAINS_IDE__ >= 20170300L ) + #define CATCH_INTERNAL_CONFIG_COUNTER +#endif + +//////////////////////////////////////////////////////////////////////////////// + +// RTX is a special version of Windows that is real time. +// This means that it is detected as Windows, but does not provide +// the same set of capabilities as real Windows does. +#if defined(UNDER_RTSS) || defined(RTX64_BUILD) + #define CATCH_INTERNAL_CONFIG_NO_WINDOWS_SEH + #define CATCH_INTERNAL_CONFIG_NO_ASYNC + #define CATCH_CONFIG_COLOUR_NONE +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Check if string_view is available and usable +// The check is split apart to work around v140 (VS2015) preprocessor issue... +#if defined(__has_include) +#if __has_include() && defined(CATCH_CPP17_OR_GREATER) +# define CATCH_INTERNAL_CONFIG_CPP17_STRING_VIEW +#endif +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Check if optional is available and usable +#if defined(__has_include) +# if __has_include() && defined(CATCH_CPP17_OR_GREATER) +# define CATCH_INTERNAL_CONFIG_CPP17_OPTIONAL +# endif // __has_include() && defined(CATCH_CPP17_OR_GREATER) +#endif // __has_include + +//////////////////////////////////////////////////////////////////////////////// +// Check if byte is available and usable +#if defined(__has_include) +# if __has_include() && defined(CATCH_CPP17_OR_GREATER) +# define CATCH_INTERNAL_CONFIG_CPP17_BYTE +# endif // __has_include() && defined(CATCH_CPP17_OR_GREATER) +#endif // __has_include + +//////////////////////////////////////////////////////////////////////////////// +// Check if variant is available and usable +#if defined(__has_include) +# if __has_include() && defined(CATCH_CPP17_OR_GREATER) +# if defined(__clang__) && (__clang_major__ < 8) + // work around clang bug with libstdc++ https://bugs.llvm.org/show_bug.cgi?id=31852 + // fix should be in clang 8, workaround in libstdc++ 8.2 +# include +# if defined(__GLIBCXX__) && defined(_GLIBCXX_RELEASE) && (_GLIBCXX_RELEASE < 9) +# define CATCH_CONFIG_NO_CPP17_VARIANT +# else +# define CATCH_INTERNAL_CONFIG_CPP17_VARIANT +# endif // defined(__GLIBCXX__) && defined(_GLIBCXX_RELEASE) && (_GLIBCXX_RELEASE < 9) +# else +# define CATCH_INTERNAL_CONFIG_CPP17_VARIANT +# endif // defined(__clang__) && (__clang_major__ < 8) +# endif // __has_include() && defined(CATCH_CPP17_OR_GREATER) +#endif // __has_include + +#if defined(CATCH_INTERNAL_CONFIG_COUNTER) && !defined(CATCH_CONFIG_NO_COUNTER) && !defined(CATCH_CONFIG_COUNTER) +# define CATCH_CONFIG_COUNTER +#endif +#if defined(CATCH_INTERNAL_CONFIG_WINDOWS_SEH) && !defined(CATCH_CONFIG_NO_WINDOWS_SEH) && !defined(CATCH_CONFIG_WINDOWS_SEH) && !defined(CATCH_INTERNAL_CONFIG_NO_WINDOWS_SEH) +# define CATCH_CONFIG_WINDOWS_SEH +#endif +// This is set by default, because we assume that unix compilers are posix-signal-compatible by default. +#if defined(CATCH_INTERNAL_CONFIG_POSIX_SIGNALS) && !defined(CATCH_INTERNAL_CONFIG_NO_POSIX_SIGNALS) && !defined(CATCH_CONFIG_NO_POSIX_SIGNALS) && !defined(CATCH_CONFIG_POSIX_SIGNALS) +# define CATCH_CONFIG_POSIX_SIGNALS +#endif +// This is set by default, because we assume that compilers with no wchar_t support are just rare exceptions. +#if !defined(CATCH_INTERNAL_CONFIG_NO_WCHAR) && !defined(CATCH_CONFIG_NO_WCHAR) && !defined(CATCH_CONFIG_WCHAR) +# define CATCH_CONFIG_WCHAR +#endif + +#if !defined(CATCH_INTERNAL_CONFIG_NO_CPP11_TO_STRING) && !defined(CATCH_CONFIG_NO_CPP11_TO_STRING) && !defined(CATCH_CONFIG_CPP11_TO_STRING) +# define CATCH_CONFIG_CPP11_TO_STRING +#endif + +#if defined(CATCH_INTERNAL_CONFIG_CPP17_OPTIONAL) && !defined(CATCH_CONFIG_NO_CPP17_OPTIONAL) && !defined(CATCH_CONFIG_CPP17_OPTIONAL) +# define CATCH_CONFIG_CPP17_OPTIONAL +#endif + +#if defined(CATCH_INTERNAL_CONFIG_CPP17_UNCAUGHT_EXCEPTIONS) && !defined(CATCH_CONFIG_NO_CPP17_UNCAUGHT_EXCEPTIONS) && !defined(CATCH_CONFIG_CPP17_UNCAUGHT_EXCEPTIONS) +# define CATCH_CONFIG_CPP17_UNCAUGHT_EXCEPTIONS +#endif + +#if defined(CATCH_INTERNAL_CONFIG_CPP17_STRING_VIEW) && !defined(CATCH_CONFIG_NO_CPP17_STRING_VIEW) && !defined(CATCH_CONFIG_CPP17_STRING_VIEW) +# define CATCH_CONFIG_CPP17_STRING_VIEW +#endif + +#if defined(CATCH_INTERNAL_CONFIG_CPP17_VARIANT) && !defined(CATCH_CONFIG_NO_CPP17_VARIANT) && !defined(CATCH_CONFIG_CPP17_VARIANT) +# define CATCH_CONFIG_CPP17_VARIANT +#endif + +#if defined(CATCH_INTERNAL_CONFIG_CPP17_BYTE) && !defined(CATCH_CONFIG_NO_CPP17_BYTE) && !defined(CATCH_CONFIG_CPP17_BYTE) +# define CATCH_CONFIG_CPP17_BYTE +#endif + +#if defined(CATCH_CONFIG_EXPERIMENTAL_REDIRECT) +# define CATCH_INTERNAL_CONFIG_NEW_CAPTURE +#endif + +#if defined(CATCH_INTERNAL_CONFIG_NEW_CAPTURE) && !defined(CATCH_INTERNAL_CONFIG_NO_NEW_CAPTURE) && !defined(CATCH_CONFIG_NO_NEW_CAPTURE) && !defined(CATCH_CONFIG_NEW_CAPTURE) +# define CATCH_CONFIG_NEW_CAPTURE +#endif + +#if !defined(CATCH_INTERNAL_CONFIG_EXCEPTIONS_ENABLED) && !defined(CATCH_CONFIG_DISABLE_EXCEPTIONS) +# define CATCH_CONFIG_DISABLE_EXCEPTIONS +#endif + +#if defined(CATCH_INTERNAL_CONFIG_POLYFILL_ISNAN) && !defined(CATCH_CONFIG_NO_POLYFILL_ISNAN) && !defined(CATCH_CONFIG_POLYFILL_ISNAN) +# define CATCH_CONFIG_POLYFILL_ISNAN +#endif + +#if defined(CATCH_INTERNAL_CONFIG_USE_ASYNC) && !defined(CATCH_INTERNAL_CONFIG_NO_ASYNC) && !defined(CATCH_CONFIG_NO_USE_ASYNC) && !defined(CATCH_CONFIG_USE_ASYNC) +# define CATCH_CONFIG_USE_ASYNC +#endif + +#if !defined(CATCH_INTERNAL_SUPPRESS_PARENTHESES_WARNINGS) +# define CATCH_INTERNAL_SUPPRESS_PARENTHESES_WARNINGS +# define CATCH_INTERNAL_UNSUPPRESS_PARENTHESES_WARNINGS +#endif +#if !defined(CATCH_INTERNAL_SUPPRESS_GLOBALS_WARNINGS) +# define CATCH_INTERNAL_SUPPRESS_GLOBALS_WARNINGS +# define CATCH_INTERNAL_UNSUPPRESS_GLOBALS_WARNINGS +#endif +#if !defined(CATCH_INTERNAL_SUPPRESS_UNUSED_WARNINGS) +# define CATCH_INTERNAL_SUPPRESS_UNUSED_WARNINGS +# define CATCH_INTERNAL_UNSUPPRESS_UNUSED_WARNINGS +#endif +#if !defined(CATCH_INTERNAL_SUPPRESS_ZERO_VARIADIC_WARNINGS) +# define CATCH_INTERNAL_SUPPRESS_ZERO_VARIADIC_WARNINGS +# define CATCH_INTERNAL_UNSUPPRESS_ZERO_VARIADIC_WARNINGS +#endif + +#if defined(CATCH_CONFIG_DISABLE_EXCEPTIONS) +#define CATCH_TRY if ((true)) +#define CATCH_CATCH_ALL if ((false)) +#define CATCH_CATCH_ANON(type) if ((false)) +#else +#define CATCH_TRY try +#define CATCH_CATCH_ALL catch (...) +#define CATCH_CATCH_ANON(type) catch (type) +#endif + +#if defined(CATCH_INTERNAL_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR) && !defined(CATCH_CONFIG_NO_TRADITIONAL_MSVC_PREPROCESSOR) && !defined(CATCH_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR) +#define CATCH_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR +#endif + +// end catch_compiler_capabilities.h +#define INTERNAL_CATCH_UNIQUE_NAME_LINE2( name, line ) name##line +#define INTERNAL_CATCH_UNIQUE_NAME_LINE( name, line ) INTERNAL_CATCH_UNIQUE_NAME_LINE2( name, line ) +#ifdef CATCH_CONFIG_COUNTER +# define INTERNAL_CATCH_UNIQUE_NAME( name ) INTERNAL_CATCH_UNIQUE_NAME_LINE( name, __COUNTER__ ) +#else +# define INTERNAL_CATCH_UNIQUE_NAME( name ) INTERNAL_CATCH_UNIQUE_NAME_LINE( name, __LINE__ ) +#endif + +#include +#include +#include + +// We need a dummy global operator<< so we can bring it into Catch namespace later +struct Catch_global_namespace_dummy {}; +std::ostream& operator<<(std::ostream&, Catch_global_namespace_dummy); + +namespace Catch { + + struct CaseSensitive { enum Choice { + Yes, + No + }; }; + + class NonCopyable { + NonCopyable( NonCopyable const& ) = delete; + NonCopyable( NonCopyable && ) = delete; + NonCopyable& operator = ( NonCopyable const& ) = delete; + NonCopyable& operator = ( NonCopyable && ) = delete; + + protected: + NonCopyable(); + virtual ~NonCopyable(); + }; + + struct SourceLineInfo { + + SourceLineInfo() = delete; + SourceLineInfo( char const* _file, std::size_t _line ) noexcept + : file( _file ), + line( _line ) + {} + + SourceLineInfo( SourceLineInfo const& other ) = default; + SourceLineInfo& operator = ( SourceLineInfo const& ) = default; + SourceLineInfo( SourceLineInfo&& ) noexcept = default; + SourceLineInfo& operator = ( SourceLineInfo&& ) noexcept = default; + + bool empty() const noexcept; + bool operator == ( SourceLineInfo const& other ) const noexcept; + bool operator < ( SourceLineInfo const& other ) const noexcept; + + char const* file; + std::size_t line; + }; + + std::ostream& operator << ( std::ostream& os, SourceLineInfo const& info ); + + // Bring in operator<< from global namespace into Catch namespace + // This is necessary because the overload of operator<< above makes + // lookup stop at namespace Catch + using ::operator<<; + + // Use this in variadic streaming macros to allow + // >> +StreamEndStop + // as well as + // >> stuff +StreamEndStop + struct StreamEndStop { + std::string operator+() const; + }; + template + T const& operator + ( T const& value, StreamEndStop ) { + return value; + } +} + +#define CATCH_INTERNAL_LINEINFO \ + ::Catch::SourceLineInfo( __FILE__, static_cast( __LINE__ ) ) + +// end catch_common.h +namespace Catch { + + struct RegistrarForTagAliases { + RegistrarForTagAliases( char const* alias, char const* tag, SourceLineInfo const& lineInfo ); + }; + +} // end namespace Catch + +#define CATCH_REGISTER_TAG_ALIAS( alias, spec ) \ + CATCH_INTERNAL_SUPPRESS_GLOBALS_WARNINGS \ + namespace{ Catch::RegistrarForTagAliases INTERNAL_CATCH_UNIQUE_NAME( AutoRegisterTagAlias )( alias, spec, CATCH_INTERNAL_LINEINFO ); } \ + CATCH_INTERNAL_UNSUPPRESS_GLOBALS_WARNINGS + +// end catch_tag_alias_autoregistrar.h +// start catch_test_registry.h + +// start catch_interfaces_testcase.h + +#include + +namespace Catch { + + class TestSpec; + + struct ITestInvoker { + virtual void invoke () const = 0; + virtual ~ITestInvoker(); + }; + + class TestCase; + struct IConfig; + + struct ITestCaseRegistry { + virtual ~ITestCaseRegistry(); + virtual std::vector const& getAllTests() const = 0; + virtual std::vector const& getAllTestsSorted( IConfig const& config ) const = 0; + }; + + bool isThrowSafe( TestCase const& testCase, IConfig const& config ); + bool matchTest( TestCase const& testCase, TestSpec const& testSpec, IConfig const& config ); + std::vector filterTests( std::vector const& testCases, TestSpec const& testSpec, IConfig const& config ); + std::vector const& getAllTestCasesSorted( IConfig const& config ); + +} + +// end catch_interfaces_testcase.h +// start catch_stringref.h + +#include +#include +#include + +namespace Catch { + + /// A non-owning string class (similar to the forthcoming std::string_view) + /// Note that, because a StringRef may be a substring of another string, + /// it may not be null terminated. c_str() must return a null terminated + /// string, however, and so the StringRef will internally take ownership + /// (taking a copy), if necessary. In theory this ownership is not externally + /// visible - but it does mean (substring) StringRefs should not be shared between + /// threads. + class StringRef { + public: + using size_type = std::size_t; + + private: + friend struct StringRefTestAccess; + + char const* m_start; + size_type m_size; + + char* m_data = nullptr; + + void takeOwnership(); + + static constexpr char const* const s_empty = ""; + + public: // construction/ assignment + StringRef() noexcept + : StringRef( s_empty, 0 ) + {} + + StringRef( StringRef const& other ) noexcept + : m_start( other.m_start ), + m_size( other.m_size ) + {} + + StringRef( StringRef&& other ) noexcept + : m_start( other.m_start ), + m_size( other.m_size ), + m_data( other.m_data ) + { + other.m_data = nullptr; + } + + StringRef( char const* rawChars ) noexcept; + + StringRef( char const* rawChars, size_type size ) noexcept + : m_start( rawChars ), + m_size( size ) + {} + + StringRef( std::string const& stdString ) noexcept + : m_start( stdString.c_str() ), + m_size( stdString.size() ) + {} + + ~StringRef() noexcept { + delete[] m_data; + } + + auto operator = ( StringRef const &other ) noexcept -> StringRef& { + delete[] m_data; + m_data = nullptr; + m_start = other.m_start; + m_size = other.m_size; + return *this; + } + + operator std::string() const; + + void swap( StringRef& other ) noexcept; + + public: // operators + auto operator == ( StringRef const& other ) const noexcept -> bool; + auto operator != ( StringRef const& other ) const noexcept -> bool; + + auto operator[] ( size_type index ) const noexcept -> char; + + public: // named queries + auto empty() const noexcept -> bool { + return m_size == 0; + } + auto size() const noexcept -> size_type { + return m_size; + } + + auto numberOfCharacters() const noexcept -> size_type; + auto c_str() const -> char const*; + + public: // substrings and searches + auto substr( size_type start, size_type size ) const noexcept -> StringRef; + + // Returns the current start pointer. + // Note that the pointer can change when if the StringRef is a substring + auto currentData() const noexcept -> char const*; + + private: // ownership queries - may not be consistent between calls + auto isOwned() const noexcept -> bool; + auto isSubstring() const noexcept -> bool; + }; + + auto operator + ( StringRef const& lhs, StringRef const& rhs ) -> std::string; + auto operator + ( StringRef const& lhs, char const* rhs ) -> std::string; + auto operator + ( char const* lhs, StringRef const& rhs ) -> std::string; + + auto operator += ( std::string& lhs, StringRef const& sr ) -> std::string&; + auto operator << ( std::ostream& os, StringRef const& sr ) -> std::ostream&; + + inline auto operator "" _sr( char const* rawChars, std::size_t size ) noexcept -> StringRef { + return StringRef( rawChars, size ); + } + +} // namespace Catch + +inline auto operator "" _catch_sr( char const* rawChars, std::size_t size ) noexcept -> Catch::StringRef { + return Catch::StringRef( rawChars, size ); +} + +// end catch_stringref.h +// start catch_type_traits.hpp + + +#include + +namespace Catch{ + +#ifdef CATCH_CPP17_OR_GREATER + template + inline constexpr auto is_unique = std::true_type{}; + + template + inline constexpr auto is_unique = std::bool_constant< + (!std::is_same_v && ...) && is_unique + >{}; +#else + +template +struct is_unique : std::true_type{}; + +template +struct is_unique : std::integral_constant +::value + && is_unique::value + && is_unique::value +>{}; + +#endif +} + +// end catch_type_traits.hpp +// start catch_preprocessor.hpp + + +#define CATCH_RECURSION_LEVEL0(...) __VA_ARGS__ +#define CATCH_RECURSION_LEVEL1(...) CATCH_RECURSION_LEVEL0(CATCH_RECURSION_LEVEL0(CATCH_RECURSION_LEVEL0(__VA_ARGS__))) +#define CATCH_RECURSION_LEVEL2(...) CATCH_RECURSION_LEVEL1(CATCH_RECURSION_LEVEL1(CATCH_RECURSION_LEVEL1(__VA_ARGS__))) +#define CATCH_RECURSION_LEVEL3(...) CATCH_RECURSION_LEVEL2(CATCH_RECURSION_LEVEL2(CATCH_RECURSION_LEVEL2(__VA_ARGS__))) +#define CATCH_RECURSION_LEVEL4(...) CATCH_RECURSION_LEVEL3(CATCH_RECURSION_LEVEL3(CATCH_RECURSION_LEVEL3(__VA_ARGS__))) +#define CATCH_RECURSION_LEVEL5(...) CATCH_RECURSION_LEVEL4(CATCH_RECURSION_LEVEL4(CATCH_RECURSION_LEVEL4(__VA_ARGS__))) + +#ifdef CATCH_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR +#define INTERNAL_CATCH_EXPAND_VARGS(...) __VA_ARGS__ +// MSVC needs more evaluations +#define CATCH_RECURSION_LEVEL6(...) CATCH_RECURSION_LEVEL5(CATCH_RECURSION_LEVEL5(CATCH_RECURSION_LEVEL5(__VA_ARGS__))) +#define CATCH_RECURSE(...) CATCH_RECURSION_LEVEL6(CATCH_RECURSION_LEVEL6(__VA_ARGS__)) +#else +#define CATCH_RECURSE(...) CATCH_RECURSION_LEVEL5(__VA_ARGS__) +#endif + +#define CATCH_REC_END(...) +#define CATCH_REC_OUT + +#define CATCH_EMPTY() +#define CATCH_DEFER(id) id CATCH_EMPTY() + +#define CATCH_REC_GET_END2() 0, CATCH_REC_END +#define CATCH_REC_GET_END1(...) CATCH_REC_GET_END2 +#define CATCH_REC_GET_END(...) CATCH_REC_GET_END1 +#define CATCH_REC_NEXT0(test, next, ...) next CATCH_REC_OUT +#define CATCH_REC_NEXT1(test, next) CATCH_DEFER ( CATCH_REC_NEXT0 ) ( test, next, 0) +#define CATCH_REC_NEXT(test, next) CATCH_REC_NEXT1(CATCH_REC_GET_END test, next) + +#define CATCH_REC_LIST0(f, x, peek, ...) , f(x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST1) ) ( f, peek, __VA_ARGS__ ) +#define CATCH_REC_LIST1(f, x, peek, ...) , f(x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST0) ) ( f, peek, __VA_ARGS__ ) +#define CATCH_REC_LIST2(f, x, peek, ...) f(x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST1) ) ( f, peek, __VA_ARGS__ ) + +#define CATCH_REC_LIST0_UD(f, userdata, x, peek, ...) , f(userdata, x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST1_UD) ) ( f, userdata, peek, __VA_ARGS__ ) +#define CATCH_REC_LIST1_UD(f, userdata, x, peek, ...) , f(userdata, x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST0_UD) ) ( f, userdata, peek, __VA_ARGS__ ) +#define CATCH_REC_LIST2_UD(f, userdata, x, peek, ...) f(userdata, x) CATCH_DEFER ( CATCH_REC_NEXT(peek, CATCH_REC_LIST1_UD) ) ( f, userdata, peek, __VA_ARGS__ ) + +// Applies the function macro `f` to each of the remaining parameters, inserts commas between the results, +// and passes userdata as the first parameter to each invocation, +// e.g. CATCH_REC_LIST_UD(f, x, a, b, c) evaluates to f(x, a), f(x, b), f(x, c) +#define CATCH_REC_LIST_UD(f, userdata, ...) CATCH_RECURSE(CATCH_REC_LIST2_UD(f, userdata, __VA_ARGS__, ()()(), ()()(), ()()(), 0)) + +#define CATCH_REC_LIST(f, ...) CATCH_RECURSE(CATCH_REC_LIST2(f, __VA_ARGS__, ()()(), ()()(), ()()(), 0)) + +#define INTERNAL_CATCH_EXPAND1(param) INTERNAL_CATCH_EXPAND2(param) +#define INTERNAL_CATCH_EXPAND2(...) INTERNAL_CATCH_NO## __VA_ARGS__ +#define INTERNAL_CATCH_DEF(...) INTERNAL_CATCH_DEF __VA_ARGS__ +#define INTERNAL_CATCH_NOINTERNAL_CATCH_DEF +#define INTERNAL_CATCH_STRINGIZE(...) INTERNAL_CATCH_STRINGIZE2(__VA_ARGS__) +#ifndef CATCH_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR +#define INTERNAL_CATCH_STRINGIZE2(...) #__VA_ARGS__ +#define INTERNAL_CATCH_STRINGIZE_WITHOUT_PARENS(param) INTERNAL_CATCH_STRINGIZE(INTERNAL_CATCH_REMOVE_PARENS(param)) +#else +// MSVC is adding extra space and needs another indirection to expand INTERNAL_CATCH_NOINTERNAL_CATCH_DEF +#define INTERNAL_CATCH_STRINGIZE2(...) INTERNAL_CATCH_STRINGIZE3(__VA_ARGS__) +#define INTERNAL_CATCH_STRINGIZE3(...) #__VA_ARGS__ +#define INTERNAL_CATCH_STRINGIZE_WITHOUT_PARENS(param) (INTERNAL_CATCH_STRINGIZE(INTERNAL_CATCH_REMOVE_PARENS(param)) + 1) +#endif + +#define INTERNAL_CATCH_MAKE_NAMESPACE2(...) ns_##__VA_ARGS__ +#define INTERNAL_CATCH_MAKE_NAMESPACE(name) INTERNAL_CATCH_MAKE_NAMESPACE2(name) + +#define INTERNAL_CATCH_REMOVE_PARENS(...) INTERNAL_CATCH_EXPAND1(INTERNAL_CATCH_DEF __VA_ARGS__) + +#ifndef CATCH_CONFIG_TRADITIONAL_MSVC_PREPROCESSOR +#define INTERNAL_CATCH_MAKE_TYPE_LIST2(...) decltype(get_wrapper()) +#define INTERNAL_CATCH_MAKE_TYPE_LIST(...) INTERNAL_CATCH_MAKE_TYPE_LIST2(INTERNAL_CATCH_REMOVE_PARENS(__VA_ARGS__)) +#else +#define INTERNAL_CATCH_MAKE_TYPE_LIST2(...) INTERNAL_CATCH_EXPAND_VARGS(decltype(get_wrapper())) +#define INTERNAL_CATCH_MAKE_TYPE_LIST(...) INTERNAL_CATCH_EXPAND_VARGS(INTERNAL_CATCH_MAKE_TYPE_LIST2(INTERNAL_CATCH_REMOVE_PARENS(__VA_ARGS__))) +#endif + +#define INTERNAL_CATCH_MAKE_TYPE_LISTS_FROM_TYPES(...)\ + CATCH_REC_LIST(INTERNAL_CATCH_MAKE_TYPE_LIST,__VA_ARGS__) + +#define INTERNAL_CATCH_REMOVE_PARENS_1_ARG(_0) INTERNAL_CATCH_REMOVE_PARENS(_0) +#define INTERNAL_CATCH_REMOVE_PARENS_2_ARG(_0, _1) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_1_ARG(_1) +#define INTERNAL_CATCH_REMOVE_PARENS_3_ARG(_0, _1, _2) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_2_ARG(_1, _2) +#define INTERNAL_CATCH_REMOVE_PARENS_4_ARG(_0, _1, _2, _3) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_3_ARG(_1, _2, _3) +#define INTERNAL_CATCH_REMOVE_PARENS_5_ARG(_0, _1, _2, _3, _4) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_4_ARG(_1, _2, _3, _4) +#define INTERNAL_CATCH_REMOVE_PARENS_6_ARG(_0, _1, _2, _3, _4, _5) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_5_ARG(_1, _2, _3, _4, _5) +#define INTERNAL_CATCH_REMOVE_PARENS_7_ARG(_0, _1, _2, _3, _4, _5, _6) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_6_ARG(_1, _2, _4, _5, _6) +#define INTERNAL_CATCH_REMOVE_PARENS_8_ARG(_0, _1, _2, _3, _4, _5, _6, _7) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_7_ARG(_1, _2, _3, _4, _5, _6, _7) +#define INTERNAL_CATCH_REMOVE_PARENS_9_ARG(_0, _1, _2, _3, _4, _5, _6, _7, _8) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_8_ARG(_1, _2, _3, _4, _5, _6, _7, _8) +#define INTERNAL_CATCH_REMOVE_PARENS_10_ARG(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_9_ARG(_1, _2, _3, _4, _5, _6, _7, _8, _9) +#define INTERNAL_CATCH_REMOVE_PARENS_11_ARG(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10) INTERNAL_CATCH_REMOVE_PARENS(_0), INTERNAL_CATCH_REMOVE_PARENS_10_ARG(_1, _2, _3, _4, _5, _6, _7, _8, _9, _10) + +#define INTERNAL_CATCH_VA_NARGS_IMPL(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, N, ...) N + +#define INTERNAL_CATCH_TYPE_GEN\ + template struct TypeList {};\ + template\ + constexpr auto get_wrapper() noexcept -> TypeList { return {}; }\ + \ + template class L1, typename...E1, template class L2, typename...E2> \ + constexpr auto append(L1, L2) noexcept -> L1 { return {}; }\ + template< template class L1, typename...E1, template class L2, typename...E2, typename...Rest>\ + constexpr auto append(L1, L2, Rest...) noexcept -> decltype(append(L1{}, Rest{}...)) { return {}; }\ + template< template class L1, typename...E1, typename...Rest>\ + constexpr auto append(L1, TypeList, Rest...) noexcept -> L1 { return {}; }\ + \ + template< template class Container, template class List, typename...elems>\ + constexpr auto rewrap(List) noexcept -> TypeList> { return {}; }\ + template< template class Container, template class List, class...Elems, typename...Elements>\ + constexpr auto rewrap(List,Elements...) noexcept -> decltype(append(TypeList>{}, rewrap(Elements{}...))) { return {}; }\ + \ + template