3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Move Detect Bridging Perimeters to region config

Browse source
This commit is contained in:
Alessandro Ranellucci 2014-05-12 23:02:33 +02:00
parent 59f0e76da1
commit 5d12a03b82
2 changed files with 5 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
lib/Slic3r/Layer/Region.pm
View file

@ -234,7 +234,7 @@ sub make_perimeters {
# prepare grown lower layer slices for overhang detection
my $lower_slices = Slic3r::ExPolygon::Collection->new;
if ($self->layer->lower_layer && $self->layer->print->config->overhangs) {
if ($self->layer->lower_layer && $self->region->config->overhangs) {
# We consider overhang any part where the entire nozzle diameter is not supported by the
# lower layer, so we take lower slices and offset them by half the nozzle diameter used
# in the current layer
@ -271,7 +271,7 @@ sub make_perimeters {
# detect overhanging/bridging perimeters
my @paths = ();
if ($self->layer->print->config->overhangs && $lower_slices->count > 0) {
if ($self->region->config->overhangs && $lower_slices->count > 0) {
# get non-overhang paths by intersecting this loop with the grown lower slices
foreach my $polyline (@{ intersection_ppl([ $polygon ], $lower_slices_p) }) {
push @paths, Slic3r::ExtrusionPath->new(

6
xs/src/PrintConfig.hpp
View file

@ -1054,6 +1054,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
ConfigOptionInt infill_extruder;
ConfigOptionFloatOrPercent infill_extrusion_width;
ConfigOptionInt infill_every_layers;
ConfigOptionBool overhangs;
ConfigOptionInt perimeter_extruder;
ConfigOptionFloatOrPercent perimeter_extrusion_width;
ConfigOptionInt perimeters;
@ -1075,6 +1076,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
this->infill_extrusion_width.value = 0;
this->infill_extrusion_width.percent = false;
this->infill_every_layers.value = 1;
this->overhangs.value = true;
this->perimeter_extruder.value = 1;
this->perimeter_extrusion_width.value = 0;
this->perimeter_extrusion_width.percent = false;
@ -1099,6 +1101,7 @@ class PrintRegionConfig : public virtual StaticPrintConfig
if (opt_key == "infill_extruder") return &this->infill_extruder;
if (opt_key == "infill_extrusion_width") return &this->infill_extrusion_width;
if (opt_key == "infill_every_layers") return &this->infill_every_layers;
if (opt_key == "overhangs") return &this->overhangs;
if (opt_key == "perimeter_extruder") return &this->perimeter_extruder;
if (opt_key == "perimeter_extrusion_width") return &this->perimeter_extrusion_width;
if (opt_key == "perimeters") return &this->perimeters;
@ -1164,7 +1167,6 @@ class PrintConfig : public virtual StaticPrintConfig
ConfigOptionBool only_retract_when_crossing_perimeters;
ConfigOptionBool ooze_prevention;
ConfigOptionString output_filename_format;
ConfigOptionBool overhangs;
ConfigOptionFloat perimeter_acceleration;
ConfigOptionFloat perimeter_speed;
ConfigOptionStrings post_process;
@ -1257,7 +1259,6 @@ class PrintConfig : public virtual StaticPrintConfig
this->only_retract_when_crossing_perimeters.value = true;
this->ooze_prevention.value = false;
this->output_filename_format.value = "[input_filename_base].gcode";
this->overhangs.value = true;
this->perimeter_acceleration.value = 0;
this->perimeter_speed.value = 30;
this->print_center.point = Pointf(100,100);
@ -1355,7 +1356,6 @@ class PrintConfig : public virtual StaticPrintConfig
if (opt_key == "only_retract_when_crossing_perimeters") return &this->only_retract_when_crossing_perimeters;
if (opt_key == "ooze_prevention") return &this->ooze_prevention;
if (opt_key == "output_filename_format") return &this->output_filename_format;
if (opt_key == "overhangs") return &this->overhangs;
if (opt_key == "perimeter_acceleration") return &this->perimeter_acceleration;
if (opt_key == "perimeter_speed") return &this->perimeter_speed;
if (opt_key == "post_process") return &this->post_process;