Follow-up to 96b88f5b29
Fixed crash with zero support base spacing. The bug fix was not correct and it disabled the new "zig-zag" sparse infill generator, leading to GH issue #7014 Somehow improved missing interface layers for snug supports by propagating full overhangs when generating interface layers. Fixed generation of soluble interfaces for support enforcers, where base support was used for steeper overhangs. Disabled filtering out thin regions from the lower layer, that will not be covered by perimeters, thus they are not supporting the current layer. However this may lead to a situation where regions at the current layer that are narrow thus not extrudable will generate unnecessary supports. For example, see GH issue #3094
This commit is contained in:
Vojtech Bubnik
parent
c0f3077ce9
commit
5de143f04f
@ -411,6 +411,7 @@ void PrintObjectSupportMaterial::generate(PrintObject &object)
|
||||
|
||||
BOOST_LOG_TRIVIAL(info) << "Support generator - Creating top contacts";
|
||||
|
||||
// Per object layer projection of the object below the layer into print bed.
|
||||
std::vector<Polygons> buildplate_covered = this->buildplate_covered(object);
|
||||
|
||||
// Determine the top contact surfaces of the support, defined as:
|
||||
@ -1241,7 +1242,7 @@ namespace SupportMaterialInternal {
|
||||
const PrintConfig &print_config,
|
||||
const Layer &lower_layer,
|
||||
const Polygons &lower_layer_polygons,
|
||||
LayerRegion *layerm,
|
||||
const LayerRegion &layerm,
|
||||
float fw,
|
||||
Polygons &contact_polygons)
|
||||
{
|
||||
@ -1251,19 +1252,19 @@ namespace SupportMaterialInternal {
|
||||
// Surface supporting this layer, expanded by 0.5 * nozzle_diameter, as we consider this kind of overhang to be sufficiently supported.
|
||||
Polygons lower_grown_slices = offset(lower_layer_polygons,
|
||||
//FIXME to mimic the decision in the perimeter generator, we should use half the external perimeter width.
|
||||
0.5f * float(scale_(print_config.nozzle_diameter.get_at(layerm->region().config().perimeter_extruder-1))),
|
||||
0.5f * float(scale_(print_config.nozzle_diameter.get_at(layerm.region().config().perimeter_extruder-1))),
|
||||
SUPPORT_SURFACES_OFFSET_PARAMETERS);
|
||||
// Collect perimeters of this layer.
|
||||
//FIXME split_at_first_point() could split a bridge mid-way
|
||||
#if 0
|
||||
Polylines overhang_perimeters = layerm->perimeters.as_polylines();
|
||||
Polylines overhang_perimeters = layerm.perimeters.as_polylines();
|
||||
// workaround for Clipper bug, see Slic3r::Polygon::clip_as_polyline()
|
||||
for (Polyline &polyline : overhang_perimeters)
|
||||
polyline.points[0].x += 1;
|
||||
// Trim the perimeters of this layer by the lower layer to get the unsupported pieces of perimeters.
|
||||
overhang_perimeters = diff_pl(overhang_perimeters, lower_grown_slices);
|
||||
#else
|
||||
Polylines overhang_perimeters = diff_pl(layerm->perimeters.as_polylines(), lower_grown_slices);
|
||||
Polylines overhang_perimeters = diff_pl(layerm.perimeters.as_polylines(), lower_grown_slices);
|
||||
#endif
|
||||
|
||||
// only consider straight overhangs
|
||||
@ -1272,7 +1273,7 @@ namespace SupportMaterialInternal {
|
||||
// since we're dealing with bridges, we can't assume width is larger than spacing,
|
||||
// so we take the largest value and also apply safety offset to be ensure no gaps
|
||||
// are left in between
|
||||
Flow perimeter_bridge_flow = layerm->bridging_flow(frPerimeter);
|
||||
Flow perimeter_bridge_flow = layerm.bridging_flow(frPerimeter);
|
||||
float w = float(std::max(perimeter_bridge_flow.scaled_width(), perimeter_bridge_flow.scaled_spacing()));
|
||||
for (Polyline &polyline : overhang_perimeters)
|
||||
if (polyline.is_straight()) {
|
||||
@ -1293,8 +1294,8 @@ namespace SupportMaterialInternal {
|
||||
bridges = union_(bridges);
|
||||
}
|
||||
// remove the entire bridges and only support the unsupported edges
|
||||
//FIXME the brided regions are already collected as layerm->bridged. Use it?
|
||||
for (const Surface &surface : layerm->fill_surfaces.surfaces)
|
||||
//FIXME the brided regions are already collected as layerm.bridged. Use it?
|
||||
for (const Surface &surface : layerm.fill_surfaces.surfaces)
|
||||
if (surface.surface_type == stBottomBridge && surface.bridge_angle != -1)
|
||||
polygons_append(bridges, surface.expolygon);
|
||||
//FIXME add the gap filled areas. Extrude the gaps with a bridge flow?
|
||||
@ -1302,14 +1303,14 @@ namespace SupportMaterialInternal {
|
||||
//FIXME add supports at regular intervals to support long bridges!
|
||||
bridges = diff(bridges,
|
||||
// Offset unsupported edges into polygons.
|
||||
offset(layerm->unsupported_bridge_edges, scale_(SUPPORT_MATERIAL_MARGIN), SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
offset(layerm.unsupported_bridge_edges, scale_(SUPPORT_MATERIAL_MARGIN), SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
// Remove bridged areas from the supported areas.
|
||||
contact_polygons = diff(contact_polygons, bridges, ApplySafetyOffset::Yes);
|
||||
|
||||
#ifdef SLIC3R_DEBUG
|
||||
static int iRun = 0;
|
||||
SVG::export_expolygons(debug_out_path("support-top-contacts-remove-bridges-run%d.svg", iRun ++),
|
||||
{ { { union_ex(offset(layerm->unsupported_bridge_edges, scale_(SUPPORT_MATERIAL_MARGIN), SUPPORT_SURFACES_OFFSET_PARAMETERS)) }, { "unsupported_bridge_edges", "orange", 0.5f } },
|
||||
{ { { union_ex(offset(layerm.unsupported_bridge_edges, scale_(SUPPORT_MATERIAL_MARGIN), SUPPORT_SURFACES_OFFSET_PARAMETERS)) }, { "unsupported_bridge_edges", "orange", 0.5f } },
|
||||
{ { union_ex(contact_polygons) }, { "contact_polygons", "blue", 0.5f } },
|
||||
{ { union_ex(bridges) }, { "bridges", "red", "black", "", scaled<coord_t>(0.1f), 0.5f } } });
|
||||
#endif /* SLIC3R_DEBUG */
|
||||
@ -1325,6 +1326,7 @@ std::vector<Polygons> PrintObjectSupportMaterial::buildplate_covered(const Print
|
||||
if (buildplate_only) {
|
||||
BOOST_LOG_TRIVIAL(debug) << "PrintObjectSupportMaterial::buildplate_covered() - start";
|
||||
buildplate_covered.assign(object.layers().size(), Polygons());
|
||||
//FIXME prefix sum algorithm, parallelize it! Parallelization will also likely be more numerically stable.
|
||||
for (size_t layer_id = 1; layer_id < object.layers().size(); ++ layer_id) {
|
||||
const Layer &lower_layer = *object.layers()[layer_id-1];
|
||||
// Merge the new slices with the preceding slices.
|
||||
@ -1368,6 +1370,8 @@ struct SlicesMarginCache
|
||||
Polygons all_polygons;
|
||||
};
|
||||
|
||||
// Tuple: overhang_polygons, contact_polygons, enforcer_polygons, no_interface_offset
|
||||
// no_interface_offset: minimum of external perimeter widths
|
||||
static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
const Layer &layer,
|
||||
const size_t layer_id,
|
||||
@ -1412,7 +1416,7 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
// Expand for better stability.
|
||||
contact_polygons = offset(overhang_polygons, scaled<float>(object_config.raft_expansion.value));
|
||||
}
|
||||
else
|
||||
else if (! layer.regions().empty())
|
||||
{
|
||||
// Generate overhang / contact_polygons for non-raft layers.
|
||||
const Layer &lower_layer = *layer.lower_layer;
|
||||
@ -1426,6 +1430,7 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
slices_margin.offset = slices_margin_offset;
|
||||
slices_margin.polygons = (slices_margin_offset == 0.f) ?
|
||||
lower_layer_polygons :
|
||||
// What is the purpose of no_interface_offset? Likely to not trim the contact layer by lower layer regions that are too thin to extrude?
|
||||
offset2(lower_layer.lslices, -no_interface_offset * 0.5f, slices_margin_offset + no_interface_offset * 0.5f, SUPPORT_SURFACES_OFFSET_PARAMETERS);
|
||||
if (buildplate_only && !annotations.buildplate_covered[layer_id].empty()) {
|
||||
if (has_enforcer)
|
||||
@ -1437,14 +1442,14 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
}
|
||||
};
|
||||
|
||||
float fw = 0;
|
||||
no_interface_offset = std::accumulate(layer.regions().begin(), layer.regions().end(), FLT_MAX,
|
||||
[](float acc, const LayerRegion *layerm) { return std::min(acc, float(layerm->flow(frExternalPerimeter).scaled_width())); });
|
||||
|
||||
float lower_layer_offset = 0;
|
||||
float no_interface_offset = 0;
|
||||
for (LayerRegion *layerm : layer.regions()) {
|
||||
// Extrusion width accounts for the roundings of the extrudates.
|
||||
// It is the maximum widh of the extrudate.
|
||||
fw = float(layerm->flow(frExternalPerimeter).scaled_width());
|
||||
no_interface_offset = (no_interface_offset == 0.f) ? fw : std::min(no_interface_offset, fw);
|
||||
float fw = float(layerm->flow(frExternalPerimeter).scaled_width());
|
||||
lower_layer_offset =
|
||||
(layer_id < (size_t)object_config.support_material_enforce_layers.value) ?
|
||||
// Enforce a full possible support, ignore the overhang angle.
|
||||
@ -1465,37 +1470,40 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
// This step is done before the contact surface is calculated by growing the overhang region.
|
||||
diff_polygons = diff(diff_polygons, annotations.buildplate_covered[layer_id]);
|
||||
}
|
||||
} else {
|
||||
if (support_auto) {
|
||||
// Get the regions needing a suport, collapse very tiny spots.
|
||||
//FIXME cache the lower layer offset if this layer has multiple regions.
|
||||
#if 1
|
||||
//FIXME this solution will trigger stupid supports for sharp corners, see GH #4874
|
||||
diff_polygons = offset2(
|
||||
diff(layerm_polygons,
|
||||
offset2(lower_layer_polygons, - 0.5f * fw, lower_layer_offset + 0.5f * fw, SUPPORT_SURFACES_OFFSET_PARAMETERS)),
|
||||
//FIXME This offset2 is targeted to reduce very thin regions to support, but it may lead to
|
||||
// no support at all for not so steep overhangs.
|
||||
- 0.1f * fw, 0.1f * fw);
|
||||
} else if (support_auto) {
|
||||
// Get the regions needing a suport, collapse very tiny spots.
|
||||
//FIXME cache the lower layer offset if this layer has multiple regions.
|
||||
#if 0
|
||||
//FIXME this solution will trigger stupid supports for sharp corners, see GH #4874
|
||||
diff_polygons = offset2(
|
||||
diff(layerm_polygons,
|
||||
// Likely filtering out thin regions from the lower layer, that will not be covered by perimeters, thus they
|
||||
// are not supporting this layer.
|
||||
// However this may lead to a situation where regions at the current layer that are narrow thus not extrudable will generate unnecessary supports.
|
||||
// For example, see GH issue #3094
|
||||
offset2(lower_layer_polygons, - 0.5f * fw, lower_layer_offset + 0.5f * fw, SUPPORT_SURFACES_OFFSET_PARAMETERS)),
|
||||
//FIXME This offset2 is targeted to reduce very thin regions to support, but it may lead to
|
||||
// no support at all for not so steep overhangs.
|
||||
- 0.1f * fw, 0.1f * fw);
|
||||
#else
|
||||
diff_polygons =
|
||||
diff(layerm_polygons,
|
||||
offset(lower_layer_polygons, lower_layer_offset, SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
diff_polygons =
|
||||
diff(layerm_polygons,
|
||||
offset(lower_layer_polygons, lower_layer_offset, SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
#endif
|
||||
if (buildplate_only && ! annotations.buildplate_covered[layer_id].empty()) {
|
||||
// Don't support overhangs above the top surfaces.
|
||||
// This step is done before the contact surface is calculated by growing the overhang region.
|
||||
diff_polygons = diff(diff_polygons, annotations.buildplate_covered[layer_id]);
|
||||
}
|
||||
if (! diff_polygons.empty()) {
|
||||
// Offset the support regions back to a full overhang, restrict them to the full overhang.
|
||||
// This is done to increase size of the supporting columns below, as they are calculated by
|
||||
// propagating these contact surfaces downwards.
|
||||
diff_polygons = diff(
|
||||
intersection(offset(diff_polygons, lower_layer_offset, SUPPORT_SURFACES_OFFSET_PARAMETERS), layerm_polygons),
|
||||
lower_layer_polygons);
|
||||
}
|
||||
if (buildplate_only && ! annotations.buildplate_covered[layer_id].empty()) {
|
||||
// Don't support overhangs above the top surfaces.
|
||||
// This step is done before the contact surface is calculated by growing the overhang region.
|
||||
diff_polygons = diff(diff_polygons, annotations.buildplate_covered[layer_id]);
|
||||
}
|
||||
if (! diff_polygons.empty()) {
|
||||
// Offset the support regions back to a full overhang, restrict them to the full overhang.
|
||||
// This is done to increase size of the supporting columns below, as they are calculated by
|
||||
// propagating these contact surfaces downwards.
|
||||
diff_polygons = diff(
|
||||
intersection(offset(diff_polygons, lower_layer_offset, SUPPORT_SURFACES_OFFSET_PARAMETERS), layerm_polygons),
|
||||
lower_layer_polygons);
|
||||
}
|
||||
//FIXME add user defined filtering here based on minimal area or minimum radius or whatever.
|
||||
}
|
||||
|
||||
if (diff_polygons.empty())
|
||||
@ -1523,8 +1531,9 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
#endif /* SLIC3R_DEBUG */
|
||||
|
||||
if (object_config.dont_support_bridges)
|
||||
//FIXME Expensive, potentially not precise enough. Misses gap fill extrusions, which bridge.
|
||||
SupportMaterialInternal::remove_bridges_from_contacts(
|
||||
print_config, lower_layer, lower_layer_polygons, layerm, fw, diff_polygons);
|
||||
print_config, lower_layer, lower_layer_polygons, *layerm, fw, diff_polygons);
|
||||
|
||||
if (diff_polygons.empty())
|
||||
continue;
|
||||
@ -1579,7 +1588,7 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
#endif // SLIC3R_DEBUG
|
||||
enforcer_polygons = diff(intersection(layer.lslices, annotations.enforcers_layers[layer_id]),
|
||||
// Inflate just a tiny bit to avoid intersection of the overhang areas with the object.
|
||||
offset(lower_layer_polygons, 0.05f * fw, SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
offset(lower_layer_polygons, 0.05f * no_interface_offset, SUPPORT_SURFACES_OFFSET_PARAMETERS));
|
||||
#ifdef SLIC3R_DEBUG
|
||||
SVG::export_expolygons(debug_out_path("support-top-contacts-enforcers-run%d-layer%d-z%f.svg", iRun, layer_id, layer.print_z),
|
||||
{ { layer.lslices, { "layer.lslices", "gray", 0.2f } },
|
||||
@ -1596,6 +1605,8 @@ static inline std::tuple<Polygons, Polygons, Polygons, float> detect_overhangs(
|
||||
return std::make_tuple(std::move(overhang_polygons), std::move(contact_polygons), std::move(enforcer_polygons), no_interface_offset);
|
||||
}
|
||||
|
||||
// Allocate one, possibly two support contact layers.
|
||||
// For "thick" overhangs, one support layer will be generated to support normal extrusions, the other to support the "thick" extrusions.
|
||||
static inline std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupportMaterial::MyLayer*> new_contact_layer(
|
||||
const PrintConfig &print_config,
|
||||
const PrintObjectConfig &object_config,
|
||||
@ -1708,6 +1719,7 @@ static inline void fill_contact_layer(
|
||||
auto lower_layer_polygons_for_dense_interface = [&lower_layer_polygons_for_dense_interface_cache, &lower_layer_polygons, no_interface_offset]() -> const Polygons& {
|
||||
if (lower_layer_polygons_for_dense_interface_cache.empty())
|
||||
lower_layer_polygons_for_dense_interface_cache =
|
||||
//FIXME no_interface_offset * 0.6f offset is not quite correct, one shall derive it based on an angle thus depending on layer height.
|
||||
offset2(lower_layer_polygons, - no_interface_offset * 0.5f, no_interface_offset * (0.6f + 0.5f), SUPPORT_SURFACES_OFFSET_PARAMETERS);
|
||||
return lower_layer_polygons_for_dense_interface_cache;
|
||||
};
|
||||
@ -1721,14 +1733,8 @@ static inline void fill_contact_layer(
|
||||
#endif // SLIC3R_DEBUG
|
||||
));
|
||||
// 2) infill polygons, expand them by half the extrusion width + a tiny bit of extra.
|
||||
if (layer_id == 0 || slicing_params.soluble_interface) {
|
||||
// if (no_interface_offset == 0.f) {
|
||||
new_layer.polygons = support_grid_pattern.extract_support(grid_params.expansion_to_slice, true
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons2", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
} else {
|
||||
bool reduce_interfaces = layer_id > 0 && ! slicing_params.soluble_interface;
|
||||
if (reduce_interfaces) {
|
||||
// Reduce the amount of dense interfaces: Do not generate dense interfaces below overhangs with 60% overhang of the extrusions.
|
||||
Polygons dense_interface_polygons = diff(overhang_polygons, lower_layer_polygons_for_dense_interface());
|
||||
if (! dense_interface_polygons.empty()) {
|
||||
@ -1746,7 +1752,7 @@ static inline void fill_contact_layer(
|
||||
SupportGridPattern support_grid_pattern(&dense_interface_polygons_trimmed, &slices_margin.polygons, grid_params);
|
||||
new_layer.polygons = support_grid_pattern.extract_support(grid_params.expansion_to_slice, false
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons3", iRun, layer_id, layer.print_z
|
||||
, "top_contact_polygons2", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
#ifdef SLIC3R_DEBUG
|
||||
@ -1765,45 +1771,59 @@ static inline void fill_contact_layer(
|
||||
{ { union_safety_offset_ex(new_layer.polygons) }, { "new_layer.polygons", "red", "black", "", scaled<coord_t>(0.1f), 0.5f } } });
|
||||
#endif /* SLIC3R_DEBUG */
|
||||
}
|
||||
} else {
|
||||
new_layer.polygons = support_grid_pattern.extract_support(grid_params.expansion_to_slice, true
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons3", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
}
|
||||
|
||||
if (! enforcer_polygons.empty() && ! slices_margin.all_polygons.empty() && layer_id > 0) {
|
||||
// Support enforcers used together with support enforcers. The support enforcers need to be handled separately from the rest of the support.
|
||||
|
||||
{
|
||||
SupportGridPattern support_grid_pattern(&enforcer_polygons, &slices_margin.all_polygons, grid_params);
|
||||
// 1) Contact polygons will be projected down. To keep the interface and base layers from growing, return a contour a tiny bit smaller than the grid cells.
|
||||
new_layer.enforcer_polygons = std::make_unique<Polygons>(support_grid_pattern.extract_support(grid_params.expansion_to_propagate, true
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons4", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
));
|
||||
}
|
||||
// 2) infill polygons, expand them by half the extrusion width + a tiny bit of extra.
|
||||
// Reduce the amount of dense interfaces: Do not generate dense interfaces below overhangs with 60% overhang of the extrusions.
|
||||
Polygons dense_interface_polygons = diff(enforcer_polygons, lower_layer_polygons_for_dense_interface());
|
||||
if (! dense_interface_polygons.empty()) {
|
||||
dense_interface_polygons =
|
||||
diff(
|
||||
// Regularize the contour.
|
||||
offset(dense_interface_polygons, no_interface_offset * 0.1f),
|
||||
slices_margin.all_polygons);
|
||||
// Support islands, to be stretched into a grid.
|
||||
//FIXME The regularization of dense_interface_polygons above may stretch dense_interface_polygons outside of the contact polygons,
|
||||
// thus some dense interface areas may not get supported. Trim the excess with contact_polygons at the following line.
|
||||
// See for example GH #4874.
|
||||
Polygons dense_interface_polygons_trimmed = intersection(dense_interface_polygons, *new_layer.enforcer_polygons);
|
||||
SupportGridPattern support_grid_pattern(&dense_interface_polygons_trimmed, &slices_margin.all_polygons, grid_params);
|
||||
// Extend the polygons to extrude with the contact polygons of support enforcers.
|
||||
bool needs_union = ! new_layer.polygons.empty();
|
||||
append(new_layer.polygons, support_grid_pattern.extract_support(grid_params.expansion_to_slice, false
|
||||
SupportGridPattern support_grid_pattern(&enforcer_polygons, &slices_margin.all_polygons, grid_params);
|
||||
// 1) Contact polygons will be projected down. To keep the interface and base layers from growing, return a contour a tiny bit smaller than the grid cells.
|
||||
new_layer.enforcer_polygons = std::make_unique<Polygons>(support_grid_pattern.extract_support(grid_params.expansion_to_propagate, true
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons5", iRun, layer_id, layer.print_z
|
||||
, "top_contact_polygons4", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
));
|
||||
if (needs_union)
|
||||
new_layer.polygons = union_(new_layer.polygons);
|
||||
));
|
||||
Polygons new_polygons;
|
||||
bool needs_union = ! new_layer.polygons.empty();
|
||||
if (reduce_interfaces) {
|
||||
// 2) infill polygons, expand them by half the extrusion width + a tiny bit of extra.
|
||||
// Reduce the amount of dense interfaces: Do not generate dense interfaces below overhangs with 60% overhang of the extrusions.
|
||||
Polygons dense_interface_polygons = diff(enforcer_polygons, lower_layer_polygons_for_dense_interface());
|
||||
if (! dense_interface_polygons.empty()) {
|
||||
dense_interface_polygons =
|
||||
diff(
|
||||
// Regularize the contour.
|
||||
offset(dense_interface_polygons, no_interface_offset * 0.1f),
|
||||
slices_margin.all_polygons);
|
||||
// Support islands, to be stretched into a grid.
|
||||
//FIXME The regularization of dense_interface_polygons above may stretch dense_interface_polygons outside of the contact polygons,
|
||||
// thus some dense interface areas may not get supported. Trim the excess with contact_polygons at the following line.
|
||||
// See for example GH #4874.
|
||||
Polygons dense_interface_polygons_trimmed = intersection(dense_interface_polygons, *new_layer.enforcer_polygons);
|
||||
SupportGridPattern support_grid_pattern(&dense_interface_polygons_trimmed, &slices_margin.all_polygons, grid_params);
|
||||
// Extend the polygons to extrude with the contact polygons of support enforcers.
|
||||
new_polygons = support_grid_pattern.extract_support(grid_params.expansion_to_slice, false
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons5", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
}
|
||||
} else {
|
||||
new_polygons = support_grid_pattern.extract_support(grid_params.expansion_to_slice, true
|
||||
#ifdef SLIC3R_DEBUG
|
||||
, "top_contact_polygons6", iRun, layer_id, layer.print_z
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
}
|
||||
append(new_layer.polygons, std::move(new_polygons));
|
||||
if (needs_union)
|
||||
new_layer.polygons = union_(new_layer.polygons);
|
||||
}
|
||||
|
||||
#ifdef SLIC3R_DEBUG
|
||||
@ -1918,8 +1938,10 @@ PrintObjectSupportMaterial::MyLayersPtr PrintObjectSupportMaterial::top_contact_
|
||||
|
||||
// Now apply the contact areas to the layer where they need to be made.
|
||||
if (! contact_polygons.empty()) {
|
||||
// Allocate the two empty layers.
|
||||
auto [new_layer, bridging_layer] = new_contact_layer(*m_print_config, *m_object_config, m_slicing_params, m_support_params.support_layer_height_min, layer, layer_storage, layer_storage_mutex);
|
||||
if (new_layer) {
|
||||
// Fill the non-bridging layer with polygons.
|
||||
fill_contact_layer(*new_layer, layer_id, m_slicing_params,
|
||||
*m_object_config, slices_margin, overhang_polygons, contact_polygons, enforcer_polygons, lower_layer_polygons,
|
||||
m_support_params.support_material_flow, no_interface_offset
|
||||
@ -1927,6 +1949,9 @@ PrintObjectSupportMaterial::MyLayersPtr PrintObjectSupportMaterial::top_contact_
|
||||
, iRun, layer
|
||||
#endif // SLIC3R_DEBUG
|
||||
);
|
||||
// Insert new layer even if there is no interface generated: Likely the support angle is not steep enough to require dense interface,
|
||||
// however generating a sparse support will be useful for the object stability.
|
||||
// if (! new_layer->polygons.empty())
|
||||
contact_out[layer_id * 2] = new_layer;
|
||||
if (bridging_layer != nullptr) {
|
||||
bridging_layer->polygons = new_layer->polygons;
|
||||
@ -1944,6 +1969,8 @@ PrintObjectSupportMaterial::MyLayersPtr PrintObjectSupportMaterial::top_contact_
|
||||
// Compress contact_out, remove the nullptr items.
|
||||
remove_nulls(contact_out);
|
||||
|
||||
// Merge close contact layers conservatively: If two layers are closer than the minimum allowed print layer height (the min_layer_height parameter),
|
||||
// the top contact layer is merged into the bottom contact layer.
|
||||
merge_contact_layers(m_slicing_params, m_support_params.support_layer_height_min, contact_out);
|
||||
|
||||
BOOST_LOG_TRIVIAL(debug) << "PrintObjectSupportMaterial::top_contact_layers() in parallel - end";
|
||||
@ -2709,6 +2736,7 @@ void PrintObjectSupportMaterial::generate_base_layers(
|
||||
ApplySafetyOffset::Yes); // safety offset to merge the touching source polygons
|
||||
layer_intermediate.layer_type = sltBase;
|
||||
|
||||
// For snug supports, expand the interfaces into the intermediate layer to make it printable.
|
||||
#if 0
|
||||
// coordf_t fillet_radius_scaled = scale_(m_object_config->support_material_spacing);
|
||||
// Fillet the base polygons and trim them again with the top, interface and contact layers.
|
||||
@ -2981,6 +3009,7 @@ std::pair<PrintObjectSupportMaterial::MyLayersPtr, PrintObjectSupportMaterial::M
|
||||
m_object_config->support_material_interface_extruder.value > 0 && m_print_config->filament_soluble.get_at(m_object_config->support_material_interface_extruder.value - 1) &&
|
||||
// Base extruder: Either "print with active extruder" not soluble.
|
||||
(m_object_config->support_material_extruder.value == 0 || ! m_print_config->filament_soluble.get_at(m_object_config->support_material_extruder.value - 1));
|
||||
bool snug_supports = m_object_config->support_material_style.value == smsSnug;
|
||||
int num_interface_layers_top = m_object_config->support_material_interface_layers;
|
||||
int num_interface_layers_bottom = m_object_config->support_material_bottom_interface_layers;
|
||||
if (num_interface_layers_bottom < 0)
|
||||
@ -3023,7 +3052,7 @@ std::pair<PrintObjectSupportMaterial::MyLayersPtr, PrintObjectSupportMaterial::M
|
||||
tbb::parallel_for(tbb::blocked_range<int>(0, int(intermediate_layers.size())),
|
||||
[&bottom_contacts, &top_contacts, &intermediate_layers, &insert_layer,
|
||||
num_interface_layers_top, num_interface_layers_bottom, num_base_interface_layers_top, num_base_interface_layers_bottom, num_interface_layers_only_top, num_interface_layers_only_bottom,
|
||||
&interface_layers, &base_interface_layers](const tbb::blocked_range<int>& range) {
|
||||
snug_supports, &interface_layers, &base_interface_layers](const tbb::blocked_range<int>& range) {
|
||||
// Gather the top / bottom contact layers intersecting with num_interface_layers resp. num_interface_layers_only intermediate layers above / below
|
||||
// this intermediate layer.
|
||||
// Index of the first top contact layer intersecting the current intermediate layer.
|
||||
@ -3055,7 +3084,10 @@ std::pair<PrintObjectSupportMaterial::MyLayersPtr, PrintObjectSupportMaterial::M
|
||||
//FIXME maybe this adds one interface layer in excess?
|
||||
if (top_contact_layer.bottom_z - EPSILON > top_z)
|
||||
break;
|
||||
polygons_append(top_contact_layer.bottom_z - EPSILON > top_inteface_z ? polygons_top_contact_projected_base : polygons_top_contact_projected_interface, top_contact_layer.polygons);
|
||||
polygons_append(top_contact_layer.bottom_z - EPSILON > top_inteface_z ? polygons_top_contact_projected_base : polygons_top_contact_projected_interface,
|
||||
// For snug supports, project the overhang polygons covering the whole overhang, so that they will merge without a gap with support polygons of the other layers.
|
||||
// For grid supports, merging of support regions will be performed by the projection into grid.
|
||||
snug_supports ? *top_contact_layer.overhang_polygons : top_contact_layer.polygons);
|
||||
}
|
||||
}
|
||||
if (num_interface_layers_bottom > 0) {
|
||||
@ -3799,7 +3831,7 @@ void PrintObjectSupportMaterial::generate_toolpaths(
|
||||
// Prepare fillers.
|
||||
SupportMaterialPattern support_pattern = m_object_config->support_material_pattern;
|
||||
bool with_sheath = m_object_config->support_material_with_sheath;
|
||||
InfillPattern infill_pattern = support_pattern == smpHoneycomb ? ipHoneycomb : (support_density < 1.05 ? ipRectilinear : ipSupportBase);
|
||||
InfillPattern infill_pattern = support_pattern == smpHoneycomb ? ipHoneycomb : (support_density > 0.95 ? ipRectilinear : ipSupportBase);
|
||||
std::vector<float> angles;
|
||||
angles.push_back(base_angle);
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user