3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixed planning of support interface layers with rafts and

Browse Source 
larger Z gap for supports than for the raft.
This commit is contained in:
Vojtech Bubnik 2021-10-18 16:59:32 +02:00
parent 76cbb7c17e
commit 5e735a59d0
1 changed files with 14 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
src/libslic3r/SupportMaterial.cpp
View File

@ -1703,15 +1703,18 @@ static inline std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupport
// Don't want to print a layer below the first layer height as it may not stick well.
//FIXME there may be a need for a single layer support, then one may decide to print it either as a bottom contact or a top contact
// and it may actually make sense to do it with a thinner layer than the first layer height.
const coordf_t min_print_z = slicing_params.raft_layers() > 1 ? slicing_params.raft_interface_top_z + support_layer_height_min + EPSILON : slicing_params.first_print_layer_height - EPSILON;
if (print_z < min_print_z) {
if (print_z < slicing_params.first_print_layer_height - EPSILON) {
// This contact layer is below the first layer height, therefore not printable. Don't support this surface.
return std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupportMaterial::MyLayer*>(nullptr, nullptr);
} else if (print_z < slicing_params.first_print_layer_height + EPSILON) {
// Align the layer with the 1st layer height.
print_z = slicing_params.first_print_layer_height;
bottom_z = 0;
height = slicing_params.first_print_layer_height;
}
const bool has_raft = slicing_params.raft_layers() > 1;
const coordf_t min_print_z = has_raft ? slicing_params.raft_contact_top_z : slicing_params.first_print_layer_height;
if (print_z < min_print_z + support_layer_height_min) {
// Align the layer with the 1st layer height or the raft contact layer.
// With raft active, any contact layer below the raft_contact_top_z will be brought to raft_contact_top_z to extend the raft area.
print_z = min_print_z;
bottom_z = has_raft ? slicing_params.raft_interface_top_z : 0;
height = has_raft ? slicing_params.contact_raft_layer_height : min_print_z;
} else {
// Don't know the height of the top contact layer yet. The top contact layer is printed with a normal flow and
// its height will be set adaptively later on.
@ -1727,9 +1730,9 @@ static inline std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupport
coordf_t bridging_print_z = layer.print_z - bridging_height - slicing_params.gap_support_object;
if (bridging_print_z >= min_print_z) {
// Not below the first layer height means this layer is printable.
if (print_z < slicing_params.first_print_layer_height + EPSILON) {
// Align the layer with the 1st layer height.
bridging_print_z = slicing_params.first_print_layer_height;
if (print_z < min_print_z + support_layer_height_min) {
// Align the layer with the 1st layer height or the raft contact layer.
bridging_print_z = min_print_z;
}
if (bridging_print_z < print_z - EPSILON) {
// Allocate the new layer.
@ -3108,7 +3111,7 @@ std::pair<PrintObjectSupportMaterial::MyLayersPtr, PrintObjectSupportMaterial::M
intermediate_layer.polygons);
if (! bottom.empty()) {
//FIXME Remove non-printable tiny islands, let them be printed using the base support.
//bottom = offset(offset_ex(std::move(bottom), - minimum_island_radius), minimum_island_radius);
//bottom = opening(std::move(bottom), minimum_island_radius);
if (! bottom.empty()) {
MyLayer &layer_new = layer_allocate(layer_storage, layer_storage_mutex, type);
layer_new.polygons = std::move(bottom);