diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini
index eb75b9d47..d23c5cb18 100644
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@@ -172,7 +172,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeters_first = 0
@@ -588,26 +588,26 @@ extruder_offset = 0x0
 gcode_flavor = marlin
 silent_mode = 0
 remaining_times = 0
-machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 2000
-machine_max_acceleration_retracting = 1500
-machine_max_acceleration_x = 3000
-machine_max_acceleration_y = 3000
-machine_max_acceleration_z = 500
-machine_max_feedrate_e = 120
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
 machine_max_feedrate_x = 500
 machine_max_feedrate_y = 500
-machine_max_feedrate_z = 12
-machine_max_jerk_e = 2.5
-machine_max_jerk_x = 20
-machine_max_jerk_y = 20
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
 machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
 max_layer_height = 0.3
 min_layer_height = 0.07
-max_print_height = 200
+max_print_height = 250
 nozzle_diameter = 0.4
 printer_notes = 
 printer_settings_id = 
@@ -631,8 +631,8 @@ variable_layer_height = 1
 wipe = 1
 z_offset = 0
 printer_model = 
-default_print_profile = 
-default_filament_profile = 
+default_print_profile = 0.16mm OPTIMAL @CREALITY
+default_filament_profile = Generic PLA @CREALITY
 
 [printer:Creality Ender-3]
 inherits = *common*
@@ -666,8 +666,6 @@ retract_length = 5
 retract_speed = 60
 deretract_speed = 40
 retract_before_wipe = 70%
-default_print_profile = 0.16mm OPTIMAL @CREALITY
-default_filament_profile = Creality PLA @CREALITY
 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors