Artillery 0.0.2 - Fixed start g-code.

resources/profiles/Artillery.idx

@@ -1,2 +1,3 @@
 min_slic3r_version = 2.3.1-beta
+0.0.2 Updated start g-code.
 0.0.1 Initial Artillery bundle

resources/profiles/Artillery.ini

@@ -11,7 +11,7 @@
 name = Artillery
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.1
+config_version = 0.0.2
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -100,11 +100,11 @@ end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to a
 
 [printer:*common_STOCK_FW*]
 inherits = *common*
-start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S[first_layer_temperature]; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 [printer:*common_UPD_FW*]
 inherits = *common*
-start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S[first_layer_temperature]; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 [printer:Sidewinder X1]
 inherits = *common_STOCK_FW*