diff --git a/resources/profiles/Print4Taste.idx b/resources/profiles/Print4Taste.idx new file mode 100644 index 000000000..b19d0f3e1 --- /dev/null +++ b/resources/profiles/Print4Taste.idx @@ -0,0 +1,2 @@ +min_slic3r_version = 2.6.0-alpha1 +0.0.1 Initial version \ No newline at end of file diff --git a/resources/profiles/Print4Taste.ini b/resources/profiles/Print4Taste.ini new file mode 100644 index 000000000..05f76e1c3 --- /dev/null +++ b/resources/profiles/Print4Taste.ini @@ -0,0 +1,131 @@ +# Print profiles for Print4Taste printers (mycusini and procusini brands) +# Created from scratch from default FFF + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = Print4Taste +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the PrusaSlicer configuration to be downgraded. +config_version = 0.0.1 +# Where to get the updates from? +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Print4Taste/ + +# The printer models will be shown by the Configuration Wizard in this order, +# also the first model installed & the first nozzle installed will be activated after install. +# Printer model name will be shown by the installation wizard. + + +[printer_model:MC2.0] +name = mycusini 2.0 +variants = 1.0 +technology = FFF +family = mycusini +bed_model = MC2.0_bed.stl +bed_texture = MC2.0_texture.svg +default_materials = mycusini 3D Choco @MC2.0 + +[print:*common_MC2.0*] +bottom_solid_layers = 2 +bridge_speed = 30 +brim_type = no_brim +compatible_printers_condition = printer_notes=~/.*PRINT4TASTE.*/ and printer_notes=~/.*MYCUSINI2.0.*/ +elefant_foot_compensation = 0.1 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 1.15 +external_perimeter_speed = 100% +extra_perimeters = 0 +extruder_clearance_height = 45 +extruder_clearance_radius = 40 +extrusion_width = 1.15 +fill_density = 20% +fill_pattern = grid +first_layer_extrusion_width = 1.15 +first_layer_height = 0.5 +first_layer_speed = 100% +gap_fill_speed = 30 +infill_anchor = 250% +infill_extrusion_width = 1 +infill_overlap = 5% +infill_speed = 30 +layer_height = 0.5 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 2 +max_volumetric_extrusion_rate_slope_positive = 2 +max_volumetric_speed = 8 +notes = Extruder clearances:\nHeight: 45 Radius: 40\nHeight: 8 Radius: 12\n\nDon't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRINT4TASTE\nPRINTER_MODEL_MYCUSINI2.0 +output_filename_format = [input_filename_base].gco +perimeter_extrusion_width = 1.15 +perimeter_speed = 30 +perimeters = 1 +slice_closing_radius = 0.49 +small_perimeter_speed = 100% +solid_infill_below_area = 10 +solid_infill_extrusion_width = 1.15 +solid_infill_speed = 100% +thin_walls = 0 +top_infill_extrusion_width = 1.15 +top_solid_infill_speed = 100% +top_solid_layers = 3 +travel_speed = 80 +skirts = 0 + +[print:0.50mm SOLID @MC2.0] +inherits = *common_MC2.0* + +[print:0.50mm FILLABLE @MC2.0] +inherits = 0.50mm SOLID @MC2.0 +top_solid_layers = 0 +fill_density = 0% +spiral_vase = 1 + +[print:0.50mm OUTLINES @MC2.0] +inherits = 0.50mm FILLABLE @MC2.0 +bottom_solid_layers = 0 + +[filament:mycusini 3D Choco @MC2.0] +filament_vendor = Print4Taste +bed_temperature = 0 +bridge_fan_speed = 0 +compatible_printers_condition = printer_notes=~/.*PRINT4TASTE.*/ and printer_notes=~/.*MYCUSINI2.0.*/ +cooling = 1 +disable_fan_first_layers = 0 +end_filament_gcode = "" +extrusion_multiplier = 0.95 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #F4A6FF +filament_density = 1.26 +filament_diameter = 18 +filament_max_volumetric_speed = 8 +filament_notes = "Full cartridge: 18 x 100 mm, 32g\nDensity: 1.26 g/cm3\nCut cartrige size: 18 x ~50 mm, 16g\nMycusini 2.0 does not require temperature control in gcode\n\n\nDon't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRINT4TASTE\nPRINTER_MODEL_MYCUSINI2.0" +ilament_retract_before_wipe = 30% +filament_retract_layer_change = 1 +filament_retract_length = 0.3 +filament_retract_lift = 1 +filament_type = GLAZE +filament_wipe = 1 +first_layer_bed_temperature = 0 +first_layer_temperature = 0 +max_fan_speed = 0 +min_fan_speed = 0 +min_print_speed = 9 +slowdown_below_layer_time = 15 +start_filament_gcode = "" +temperature = 0 + +[printer:mycusini 2.0] +printer_model = MC2.0 +printer_variant = 1.0 +bed_shape = 5x2.5,105x2.5,105x112.5,5x112.5 +color_change_gcode = +end_gcode = M83 ;Relative mode to retract\nG1 F2400 E-0.1 ;Retract\nM84 ;Back to absolute mode after retract\nG0 F2400 X90 Y55 Z45 ;Park +max_layer_height = 0.75 +max_print_height = 45 +min_layer_height = 0.3 +nozzle_diameter = 1 +pause_print_gcode = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRINT4TASTE\nPRINTER_MODEL_MYCUSINI2.0 +retract_length = 0.1 +start_gcode = G1 F2400 E-0.3 ;Retract\nG0 F2400 X100 Y55 Z20.7 ;Full coordinates to prevent ramming down\nG0 F2400 X100 Y40 Z0.5 ;Start purge line\nG0 F570 X100 Y10 Z0.5 E0.025 ;Purge slightly more, should make a line only a few mm long +default_print_profile = 0.50mm SOLID @MC2.0 +default_filament_profile = mycusini 3D Choco @MC2.0 \ No newline at end of file diff --git a/resources/profiles/Print4Taste/MC2.0_bed.stl b/resources/profiles/Print4Taste/MC2.0_bed.stl new file mode 100644 index 000000000..2db61908d Binary files /dev/null and b/resources/profiles/Print4Taste/MC2.0_bed.stl differ diff --git a/resources/profiles/Print4Taste/MC2.0_texture.svg b/resources/profiles/Print4Taste/MC2.0_texture.svg new file mode 100644 index 000000000..b3cce084f --- /dev/null +++ b/resources/profiles/Print4Taste/MC2.0_texture.svg @@ -0,0 +1,165 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Print4Taste/MC2.0_thumbnail.png b/resources/profiles/Print4Taste/MC2.0_thumbnail.png new file mode 100644 index 000000000..886dd3454 Binary files /dev/null and b/resources/profiles/Print4Taste/MC2.0_thumbnail.png differ