Extended the Config Wizard to offer a selection of config bundles

bundled with Slic3r installation, and install it into user's Slic3r profile.
These bundled config bundles will be contained in the Slic3r source
tree under Slic3r/resources/profiles.

Breaking change! The Slic3r user directory has been renamed to Slic3rPE
for the Prusa Edition. Also it is likely, that the Slic3rPE directory
will be reorganized before the final 1.38 release to reserve space
for temporary profiles downloaded from the Internet.

lib/Slic3r.pm

@@ -42,6 +42,7 @@ use FindBin;
 
 # Let the XS module know where the GUI resources reside.
 set_var_dir(decode_path($FindBin::Bin) . "/var");
+set_resources_dir(decode_path($FindBin::Bin) . (($^O eq 'darwin') ? '/Resources' : '/resources'));
 
 use Moo 1.003001;
 

lib/Slic3r/GUI.pm

@@ -70,7 +70,7 @@ our $grey = Wx::Colour->new(200,200,200);
 sub OnInit {
     my ($self) = @_;
     
-    $self->SetAppName('Slic3r');
+    $self->SetAppName('Slic3rPE');
     $self->SetAppDisplayName('Slic3r Prusa Edition');
     Slic3r::debugf "wxWidgets version %s, Wx version %s\n", &Wx::wxVERSION_STRING, $Wx::VERSION;
 

lib/Slic3r/GUI/ConfigWizard.pm

@@ -14,14 +14,14 @@ our $wizard = 'Wizard';
 $wizard = 'Assistant' if &Wx::wxMAC || &Wx::wxGTK;
 
 sub new {
-    my $class = shift;
-    my ($parent) = @_;
+    my ($class, $parent, $presets) = @_;
     my $self = $class->SUPER::new($parent, -1, "Configuration $wizard");
 
     # initialize an empty repository
     $self->{config} = Slic3r::Config->new;
 
-    $self->add_page(Slic3r::GUI::ConfigWizard::Page::Welcome->new($self));
+    my $welcome_page = Slic3r::GUI::ConfigWizard::Page::Welcome->new($self);
+    $self->add_page($welcome_page);
     $self->add_page(Slic3r::GUI::ConfigWizard::Page::Firmware->new($self));
     $self->add_page(Slic3r::GUI::ConfigWizard::Page::Bed->new($self));
     $self->add_page(Slic3r::GUI::ConfigWizard::Page::Nozzle->new($self));
@@ -32,12 +32,13 @@ sub new {
 
     $_->build_index for @{$self->{pages}};
 
+    $welcome_page->set_selection_presets([@{$presets}, 'Other']);
+
     return $self;
 }
 
 sub add_page {
-    my $self = shift;
-    my ($page) = @_;
+    my ($self, $page) = @_;
 
     my $n = push @{$self->{pages}}, $page;
     # add first page to the page area sizer
@@ -48,13 +49,13 @@ sub add_page {
 }
 
 sub run {
-    my $self = shift;
-    
+    my ($self) = @_;
+    my $result = undef;
     if (Wx::Wizard::RunWizard($self, $self->{pages}[0])) {
-        
-        # it would be cleaner to have these defined inside each page class,
-        # in some event getting called before leaving the page
-        {
+        my $preset_name = $self->{pages}[0]->{preset_name};
+        if ($preset_name eq 'Other') {
+            # it would be cleaner to have these defined inside each page class,
+            # in some event getting called before leaving the page
             # set first_layer_height + layer_height based on nozzle_diameter
             my $nozzle = $self->{config}->nozzle_diameter;
             $self->{config}->set('first_layer_height', $nozzle->[0]);
@@ -66,14 +67,13 @@ sub run {
             # set first_layer_bed_temperature to temperature + 5
             $self->{config}->set('first_layer_bed_temperature',
                 [ ($self->{config}->bed_temperature->[0] > 0) ? ($self->{config}->bed_temperature->[0] + 5) : 0 ]);
+            $result = $self->{config};
+        } else {
+            $result = $preset_name;
         }
-        
-        $self->Destroy;
-        return $self->{config};
-    } else {
-        $self->Destroy;
-        return undef;
     }
+    $self->Destroy;
+    return $result;
 }
 
 package Slic3r::GUI::ConfigWizard::Index;
@@ -127,6 +127,8 @@ sub repaint {
 
         $dc->SetTextForeground(Wx::Colour->new(128, 128, 128)) if $i > $self->{own_index};
         $dc->DrawLabel($_, $bullet, Wx::Rect->new(0, $i * ($label_h + $gap), $label_w, $label_h));
+        # Only show the first bullet if this is the only wizard page to be displayed.
+        last if $i == 0 && $self->{just_welcome};
         $i++;
     }
 
@@ -263,19 +265,58 @@ sub config {
 
 package Slic3r::GUI::ConfigWizard::Page::Welcome;
 use base 'Slic3r::GUI::ConfigWizard::Page';
+use Wx qw(:misc :sizer wxID_FORWARD);
+use Wx::Event qw(EVT_ACTIVATE EVT_CHOICE);
 
 sub new {
     my $class = shift;
     my ($parent) = @_;
     my $self = $class->SUPER::new($parent, "Welcome to the Slic3r Configuration $wizard", 'Welcome');
+    $self->{full_wizard_workflow} = 1;
 
-    $self->append_text('Hello, welcome to Slic3r! This '.lc($wizard).' helps you with the initial configuration; just a few settings and you will be ready to print.');
-    $self->append_text('To import an existing configuration instead, cancel this '.lc($wizard).' and use the Open Config menu item found in the File menu.');
-    $self->append_text('To continue, click Next.');
+    $self->append_text('Hello, welcome to Slic3r Prusa Edition! This '.lc($wizard).' helps you with the initial configuration; just a few settings and you will be ready to print.');
+    $self->append_text('Please select your printer vendor and printer type. If your printer is not listed, you may try your luck and select a similar one. If you select "Other", this ' . lc($wizard) . ' will let you set the basic 3D printer parameters.');
+        # To import an existing configuration instead, cancel this '.lc($wizard).' and use the Open Config menu item found in the File menu.');
+    $self->append_text('If you received a configuration file or a config bundle from your 3D printer vendor, cancel this '.lc($wizard).' and use the "File->Load Config" or "File->Load Config Bundle" menu.');
+
+    $self->{choice} = my $choice = Wx::Choice->new($self, -1, wxDefaultPosition, wxDefaultSize, []);
+    $self->{vsizer}->Add($choice, 0, wxEXPAND | wxTOP | wxBOTTOM, 10);
+
+    EVT_CHOICE($parent, $choice, sub {
+        my $sel = $self->{choice}->GetStringSelection;
+        $self->{preset_name} = $sel;
+        $self->set_full_wizard_workflow(($sel eq 'Other') || ($sel eq ''));
+    });
+
+    EVT_ACTIVATE($parent, sub {
+        $self->set_full_wizard_workflow($self->{preset_name} eq 'Other');
+    });
 
     return $self;
 }
 
+sub set_full_wizard_workflow {
+    my ($self, $full_workflow) = @_;
+    $self->{full_wizard_workflow} = $full_workflow;
+    $self->{index}->{just_welcome} = !$full_workflow;
+    $self->{index}->Refresh;
+    my $next_button = $self->GetParent->FindWindow(wxID_FORWARD);
+    $next_button->SetLabel($full_workflow ? "&Next >" : "&Finish");
+}
+
+# Set the preset names, select the first item.
+sub set_selection_presets {
+    my ($self, $names) = @_;
+    $self->{choice}->Append($names);
+    $self->{choice}->SetSelection(0);
+    $self->{preset_name} = $names->[0];
+}
+
+sub GetNext {
+    my $self = shift;
+    return $self->{full_wizard_workflow} ? $self->{next_page} : undef;
+}
+
 package Slic3r::GUI::ConfigWizard::Page::Firmware;
 use base 'Slic3r::GUI::ConfigWizard::Page';
 

lib/Slic3r/GUI/MainFrame.pm

@@ -617,16 +617,40 @@ sub config_wizard {
     my ($self) = @_;
     # Exit wizard if there are unsaved changes and the user cancels the action.
     return unless $self->check_unsaved_changes;
-    if (my $config = Slic3r::GUI::ConfigWizard->new($self)->run) {
-        for my $tab (values %{$self->{options_tabs}}) {
-            # Select the first visible preset, force.
-            $tab->select_preset(undef, 1);
+    # Enumerate the profiles bundled with the Slic3r installation under resources/profiles.
+    my $directory = Slic3r::resources_dir() . "/profiles";
+    my @profiles = ();
+    if (opendir(DIR, Slic3r::encode_path($directory))) {
+        while (my $file = readdir(DIR)) {
+            if ($file =~ /\.ini$/) {
+                $file =~ s/\.ini$//;
+                push @profiles, Slic3r::decode_path($file);
+            }
         }
-        # Load the config over the previously selected defaults.
-        $self->load_config($config);
-        for my $tab (values %{$self->{options_tabs}}) {
-            # Save the settings under a new name, select the name.
-            $tab->save_preset('My Settings');
+        closedir(DIR);
+    }
+    # Open the wizard.
+    if (my $config = Slic3r::GUI::ConfigWizard->new($self, \@profiles)->run) {
+        if (ref($config)) {
+            # Wizard returned a config. Add the config to each of the preset types.
+            for my $tab (values %{$self->{options_tabs}}) {
+                # Select the first visible preset, force.
+                $tab->select_preset(undef, 1);
+            }
+            # Load the config over the previously selected defaults.
+            $self->load_config($config);
+            for my $tab (values %{$self->{options_tabs}}) {
+                # Save the settings under a new name, select the name.
+                $tab->save_preset('My Settings');
+            }
+        } else {
+            # Wizard returned a name of a preset bundle bundled with the installation. Unpack it.
+            eval { wxTheApp->{preset_bundle}->load_configbundle($directory . '/' . $config . '.ini'); };
+            Slic3r::GUI::catch_error($self) and return;
+            # Load the currently selected preset into the GUI, update the preset selection box.
+            foreach my $tab (values %{$self->{options_tabs}}) {
+                $tab->load_current_preset;
+            }
         }
     }
 }

xs/src/libslic3r/Utils.hpp

@@ -15,6 +15,11 @@ const std::string& var_dir();
 // Return a full resource path for a file_name.
 std::string var(const std::string &file_name);
 
+// Set a path with various static definition data (for example the initial config bundles).
+void set_resources_dir(const std::string &path);
+// Return a full path to the resources directory.
+const std::string& resources_dir();
+
 // Set a path with preset files.
 void set_data_dir(const std::string &path);
 // Return a full path to the GUI resource files.

xs/src/libslic3r/utils.cpp

@@ -89,6 +89,18 @@ std::string var(const std::string &file_name)
     return file.string();
 }
 
+static std::string g_resources_dir;
+
+void set_resources_dir(const std::string &dir)
+{
+    g_resources_dir = dir;
+}
+
+const std::string& resources_dir()
+{
+    return g_resources_dir;
+}
+
 static std::string g_data_dir;
 
 void set_data_dir(const std::string &dir)

xs/xsp/XS.xsp

@@ -60,6 +60,18 @@ var_dir()
         RETVAL = const_cast<char*>(Slic3r::var_dir().c_str());
     OUTPUT: RETVAL
 
+void
+set_resources_dir(dir)
+    char  *dir;
+    CODE:
+        Slic3r::set_resources_dir(dir);
+
+char*
+resources_dir()
+    CODE:
+        RETVAL = const_cast<char*>(Slic3r::resources_dir().c_str());
+    OUTPUT: RETVAL
+
 std::string
 var(file_name)
     const char *file_name;