Split the MK2.5 profile from the MK2S
This commit is contained in:
bubnikv
parent
a54e587751
commit
69705b5e66
2 changed files with 62 additions and 2 deletions
|
|
@ -1,3 +1,4 @@
|
|||
0.1.6 Split the MK2.5 profile from the MK2S
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.1.5
|
||||
config_version = 0.1.6
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
||||
|
||||
|
|
@ -19,7 +19,11 @@ name = Original Prusa i3 MK3
|
|||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2S]
|
||||
name = Original Prusa i3 MK2S, MK2.5
|
||||
name = Original Prusa i3 MK2S
|
||||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2.5]
|
||||
name = Original Prusa i3 MK2.5
|
||||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2SMM]
|
||||
|
|
@ -166,6 +170,10 @@ support_material_threshold = 80
|
|||
support_material_with_sheath = 1
|
||||
wipe_tower = 1
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.05mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
|
|
@ -226,6 +234,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
|||
fill_pattern = grid
|
||||
top_infill_extrusion_width = 0.4
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.10mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
|
|
@ -299,6 +311,10 @@ solid_infill_speed = 200
|
|||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.15mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 5
|
||||
|
|
@ -420,6 +436,10 @@ perimeter_speed = 45
|
|||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.20mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:0.20mm 100mms Linear Advance]
|
||||
inherits = *0.20mm*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
|
||||
|
|
@ -483,6 +503,10 @@ perimeter_speed = 45
|
|||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- 0.35mm ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[print:*0.35mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 3
|
||||
|
|
@ -532,6 +556,10 @@ support_material_interface_layers = 2
|
|||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 150%
|
||||
|
||||
# XXXXXXxxXXXXXXXXXXXXXX
|
||||
# XXX--- filament ---XXX
|
||||
# XXXXXXXXxxXXXXXXXXXXXX
|
||||
|
||||
[filament:*common*]
|
||||
cooling = 1
|
||||
compatible_printers =
|
||||
|
|
@ -958,6 +986,10 @@ variable_layer_height = 0
|
|||
default_print_profile = 0.15mm OPTIMAL
|
||||
default_filament_profile = Prusa PLA
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK2 ---XXX
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2]
|
||||
inherits = *common*
|
||||
|
||||
|
|
@ -980,6 +1012,10 @@ nozzle_diameter = 0.6
|
|||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK2MM ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2 MM Single Mode]
|
||||
inherits = *mm-single*
|
||||
|
||||
|
|
@ -999,6 +1035,29 @@ nozzle_diameter = 0.6,0.6,0.6,0.6
|
|||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK2.5 ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK2.5]
|
||||
inherits = Original Prusa i3 MK2
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.25 nozzle
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2 0.6 nozzle
|
||||
printer_model = MK2.5
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK3 ---XXX
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
|
||||
[printer:Original Prusa i3 MK3]
|
||||
inherits = *common*
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
|
|
|
|||
Loading…
Reference in a new issue