diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index ba4123588..63a81db49 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,8 +1,14 @@ min_slic3r_version = 1.41.0-alpha +0.2.2 Edited MMU2 Single mode purge line +0.2.1 Added PET and BVOH settings for MMU2 +0.2.0-beta5 Fixed MMU1 ramming parameters +0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower +0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2 +0.2.0-beta2 Edited first layer speed and wipe tower position 0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles 0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets. -0.2.0-alpha7 Fixed the *MK3* references -0.2.0-alpha6 +0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references +0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version 0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2 0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers. 0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index 32ec800e7..3b44a4bc7 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the Slic3r configuration to be downgraded. -config_version = 0.2.0-beta +config_version = 0.2.2 # Where to get the updates from? config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/ @@ -67,7 +67,7 @@ fill_pattern = cubic first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 -first_layer_speed = 30 +first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 infill_every_layers = 1 @@ -113,7 +113,7 @@ support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 -support_material_contact_distance = 0.15 +support_material_contact_distance = 0.1 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 @@ -122,9 +122,9 @@ support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 -support_material_threshold = 45 +support_material_threshold = 55 support_material_with_sheath = 0 -support_material_xy_spacing = 60% +support_material_xy_spacing = 50% thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 @@ -133,13 +133,15 @@ wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 135 +wipe_tower_x = 170 +wipe_tower_y = 140 xy_size_compensation = 0 [print:*MK3*] fill_pattern = grid single_extruder_multi_material_priming = 0 +wipe_tower_x = 170 +wipe_tower_y = 125 # Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] @@ -557,13 +559,17 @@ compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ a end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 filament_loading_speed = 28 +filament_loading_speed_start = 3 filament_unloading_speed = 90 +filament_unloading_speed_start = 100 filament_toolchange_delay = 0 filament_cooling_moves = 4 filament_cooling_initial_speed = 2.2 filament_cooling_final_speed = 3.4 +filament_load_time = 0 +filament_unload_time = 0 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_minimal_purge_on_wipe_tower = 5 +filament_minimal_purge_on_wipe_tower = 15 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 @@ -664,6 +670,8 @@ cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 +filament_cost = 58.66 +filament_density = 1.18 first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 @@ -741,7 +749,7 @@ temperature = 260 [filament:E3D Edge] inherits = *PET* -filament_cost = 0 +filament_cost = 56.9 filament_density = 1.26 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" @@ -754,14 +762,14 @@ temperature = 270 [filament:Fillamentum ABS] inherits = *ABS* -filament_cost = 0 +filament_cost = 32.4 filament_density = 1.04 first_layer_temperature = 240 temperature = 240 [filament:Fillamentum ASA] inherits = *ABS* -filament_cost = 0 +filament_cost = 38.7 filament_density = 1.04 fan_always_on = 1 first_layer_temperature = 265 @@ -769,7 +777,7 @@ temperature = 265 [filament:Fillamentum CPE HG100 HM100] inherits = *PET* -filament_cost = 0 +filament_cost = 54.1 filament_density = 1.25 filament_notes = "CPE HG100 , CPE HM100" first_layer_bed_temperature = 90 @@ -783,7 +791,7 @@ inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 -filament_cost = 0 +filament_cost = 68 filament_density = 1.15 filament_colour = #804040 filament_max_volumetric_speed = 10 @@ -793,24 +801,26 @@ temperature = 190 [filament:Generic ABS] inherits = *ABS* -filament_cost = 0 +filament_cost = 27.82 filament_density = 1.04 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" [filament:Generic PET] inherits = *PET* -filament_cost = 0 +filament_cost = 27.82 filament_density = 1.24 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" [filament:Generic PLA] inherits = *PLA* -filament_cost = 0 +filament_cost = 25.4 filament_density = 1.27 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" [filament:Polymaker PC-Max] inherits = *ABS* +filament_cost = 77.3 +filament_density = 1.20 bed_temperature = 115 filament_colour = #3A80CA first_layer_bed_temperature = 100 @@ -819,6 +829,8 @@ temperature = 270 [filament:Primavalue PVA] inherits = *PLA* +filament_cost = 108 +filament_density = 1.23 cooling = 0 fan_always_on = 0 filament_colour = #FFFFD7 @@ -843,10 +855,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 filament_cooling_moves = 5 -filament_loading_speed = 14 filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"; -filament_load_time = 12 -filament_unload_time = 11 [filament:Generic ABS MMU2] inherits = *ABS MMU2* @@ -856,6 +865,8 @@ inherits = *ABS MMU2* [filament:Prusa HIPS] inherits = *ABS* +filament_cost = 27.3 +filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 0.9 @@ -876,6 +887,28 @@ filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +[filament:*PET MMU2*] +inherits = Prusa PET +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material +temperature = 230 +first_layer_temperature = 230 +filament_cooling_final_speed = 1 +filament_cooling_initial_speed = 2 +filament_cooling_moves = 1 +filament_load_time = 12 +filament_loading_speed = 14 +filament_notes = PET +filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" +filament_unload_time = 11 +filament_unloading_speed = 20 +filament_unloading_speed_start = 120 + +[filament:Generic PET MMU2] +inherits = *PET MMU2* + +[filament:Prusa PET MMU2] +inherits = *PET MMU2* + [filament:Prusa PLA] inherits = *PLA* filament_cost = 25.4 @@ -885,13 +918,15 @@ filament_notes = "List of materials tested with standart PLA print settings for [filament:*PLA MMU2*] inherits = Prusa PLA compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material -filament_cooling_final_speed = 50 -filament_cooling_initial_speed = 10 -filament_cooling_moves = 7 -filament_loading_speed = 14 -filament_ramming_parameters = "120 110 4.03226 4.12903 4.25806 4.41935 4.58065 4.80645 5.35484 6.29032 7.58065 9.09677 10.5806 11.8387 12.6452 12.9677| 0.05 4.01935 0.45 4.15483 0.95 4.50968 1.45 4.94516 1.95 6.79677 2.45 9.87102 2.95 12.4388 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" +temperature = 205 +filament_cooling_final_speed = 1 +filament_cooling_initial_speed = 2 +filament_cooling_moves = 1 filament_load_time = 12 +filament_loading_speed = 14 +filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 11 +filament_unloading_speed = 20 [filament:Generic PLA MMU2] inherits = *PLA MMU2* @@ -901,11 +936,13 @@ inherits = *PLA MMU2* [filament:SemiFlex or Flexfill 98A] inherits = *FLEX* -filament_cost = 0 +filament_cost = 82 filament_density = 1.22 [filament:Taulman Bridge] inherits = *common* +filament_cost = 40 +filament_density = 1.13 bed_temperature = 90 bridge_fan_speed = 40 cooling = 0 @@ -925,6 +962,8 @@ temperature = 250 [filament:Taulman T-Glase] inherits = *PET* +filament_cost = 40 +filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 @@ -936,6 +975,8 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{el [filament:Verbatim BVOH] inherits = *common* +filament_cost = 218 +filament_density = 1.23 bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 @@ -944,7 +985,7 @@ extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 4 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" filament_soluble = 1 filament_type = PLA @@ -955,8 +996,29 @@ min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 +[filament:Verbatim BVOH MMU2] +inherits = Verbatim BVOH +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material +temperature = 195 +filament_notes = BVOH +fan_always_on = 1 +first_layer_temperature = 200 +filament_cooling_final_speed = 1 +filament_cooling_initial_speed = 2 +filament_max_volumetric_speed = 4 +filament_type = PVA +filament_cooling_moves = 1 +filament_load_time = 12 +filament_loading_speed = 14 +filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +filament_unload_time = 11 +filament_unloading_speed = 20 +filament_unloading_speed_start = 100 + [filament:Verbatim PP] inherits = *common* +filament_cost = 72 +filament_density = 0.89 bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 @@ -1207,7 +1269,7 @@ default_filament_profile = Prusa PLA MMU2 [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* -start_gcode = M107\nM115 U3.3.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.4.0-RC2 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2] @@ -1215,9 +1277,10 @@ inherits = *mm2* # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. +machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M107\nM115 U3.3.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\n;M221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.4.0-RC2 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. diff --git a/xs/src/libslic3r/libslic3r.h b/xs/src/libslic3r/libslic3r.h index 6db60440b..ddd056bc7 100644 --- a/xs/src/libslic3r/libslic3r.h +++ b/xs/src/libslic3r/libslic3r.h @@ -14,7 +14,7 @@ #include #define SLIC3R_FORK_NAME "Slic3r Prusa Edition" -#define SLIC3R_VERSION "1.41.0-beta2" +#define SLIC3R_VERSION "1.41.0" #define SLIC3R_BUILD "UNKNOWN" typedef int32_t coord_t; diff --git a/xs/src/slic3r/Utils/Duet.cpp b/xs/src/slic3r/Utils/Duet.cpp index 865d2b418..82a42eb71 100644 --- a/xs/src/slic3r/Utils/Duet.cpp +++ b/xs/src/slic3r/Utils/Duet.cpp @@ -230,7 +230,7 @@ std::string Duet::timestamp_str() const auto tm = *std::localtime(&t); char buffer[BUFFER_SIZE]; - std::strftime(buffer, BUFFER_SIZE, "time=%Y-%d-%mT%H:%M:%S", &tm); + std::strftime(buffer, BUFFER_SIZE, "time=%Y-%m-%dT%H:%M:%S", &tm); return std::string(buffer); }