3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Lower the curled height tolerance from 0.3 to 0.1 mm of the curled overhang avoidance algorithm.

Browse source
This commit is contained in:
PavelMikus 2023-02-09 13:36:42 +01:00
parent 8b3ff9b9c4
commit 73635e0855
2 changed files with 6 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
src/libslic3r/SupportSpotsGenerator.cpp
View file

@ -954,7 +954,7 @@ std::tuple<SupportPoints, PartialObjects> check_stability(const PrintObject *po,
float unchecked_dist = params.min_distance_between_support_points + 1.0f;
for (const ExtrusionLine &line : current_slice_ext_perims_lines) {
if ((unchecked_dist + line.len < params.min_distance_between_support_points && line.curled_up_height < 0.3f) ||
if ((unchecked_dist + line.len < params.min_distance_between_support_points && line.curled_up_height < params.curling_tolerance_limit) ||
line.len < EPSILON) {
unchecked_dist += line.len;
} else {
@ -1077,14 +1077,14 @@ void estimate_supports_malformations(SupportLayerPtrs &layers, float flow_width,
}
for (const ExtrusionLine &line : current_layer_lines) {
if (line.curled_up_height > 0.3f) {
if (line.curled_up_height > params.curling_tolerance_limit) {
l->malformed_lines.push_back(Line{Point::new_scale(line.a), Point::new_scale(line.b)});
}
}
#ifdef DEBUG_FILES
for (const ExtrusionLine &line : current_layer_lines) {
if (line.curled_up_height > 0.3f) {
if (line.curled_up_height > params.curling_tolerance_limit) {
Vec3f color = value_to_rgbf(-EPSILON, l->height * params.max_curled_height_factor, line.curled_up_height);
fprintf(debug_file, "v %f %f %f %f %f %f\n", line.b[0], line.b[1], l->print_z, color[0], color[1], color[2]);
}
@ -1150,14 +1150,14 @@ void estimate_malformations(LayerPtrs &layers, const Params &params)
}
for (const ExtrusionLine &line : current_layer_lines) {
if (line.curled_up_height > 0.3f) {
if (line.curled_up_height > params.curling_tolerance_limit) {
l->malformed_lines.push_back(Line{Point::new_scale(line.a), Point::new_scale(line.b)});
}
}
#ifdef DEBUG_FILES
for (const ExtrusionLine &line : current_layer_lines) {
if (line.curled_up_height > 0.3f) {
if (line.curled_up_height > params.curling_tolerance_limit) {
Vec3f color = value_to_rgbf(-EPSILON, l->height * params.max_curled_height_factor, line.curled_up_height);
fprintf(debug_file, "v %f %f %f %f %f %f\n", line.b[0], line.b[1], l->print_z, color[0], color[1], color[2]);
}

1
src/libslic3r/SupportSpotsGenerator.hpp
View file

@ -44,6 +44,7 @@ struct Params
const std::pair<float,float> malformation_distance_factors = std::pair<float, float> { 0.5, 1.1 };
const float max_curled_height_factor = 10.0f;
const float curling_tolerance_limit = 0.1f;
const float min_distance_between_support_points = 3.0f; //mm
const float support_points_interface_radius = 1.5f; // mm