Profiles for PrusaSlicer-2.2.0-alpha0
This commit is contained in:
bubnikv
parent
4bce9e0eb9
commit
75a2e0e3f9
@ -1,4 +1,12 @@
|
||||
min_slic3r_version = 2.2.0-alpha0
|
||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||
min_slic3r_version = 2.1.1-beta0
|
||||
1.0.6 Added Prusa MINI profiles
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.5 Added SLA materials
|
||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||
1.0.3 Added filament profiles
|
||||
1.0.2 Added SLA materials
|
||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||
@ -7,6 +15,8 @@ min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.0-alpha1 Added Prusament ASA profile
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.7 Updated firmware version
|
||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.8.5 Updated SL1 printer and material settings
|
||||
0.8.4 Added Prusament ASA profile
|
||||
0.8.3 FW version and SL1 materials update
|
||||
@ -31,6 +41,8 @@ min_slic3r_version = 1.42.0-alpha
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.10 Updated firmware version
|
||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
@ -41,6 +53,8 @@ min_slic3r_version = 1.41.3-alpha
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.10 Updated firmware version
|
||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
@ -77,6 +91,8 @@ min_slic3r_version = 1.41.0-alpha
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.18 Updated firmware version
|
||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.0.4
|
||||
config_version = 1.1.0
|
||||
# Where to get the updates from?
|
||||
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
||||
changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
@ -218,6 +218,8 @@ infill_acceleration = 1000
|
||||
bridge_acceleration = 1000
|
||||
support_material_speed = 40
|
||||
max_print_speed = 150
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 35
|
||||
|
||||
# Print parameters common to a 0.25mm diameter nozzle.
|
||||
[print:*0.25nozzle*]
|
||||
@ -464,7 +466,7 @@ top_solid_infill_speed = 30
|
||||
top_solid_layers = 11
|
||||
|
||||
# MK3 #
|
||||
[print:0.07mm ULTRADETAIL MK3]
|
||||
[print:0.07mm ULTRADETAIL @MK3]
|
||||
inherits = *0.07mm*; *MK3*
|
||||
# alias = 0.07mm ULTRADETAIL
|
||||
fill_pattern = gyroid
|
||||
@ -1105,7 +1107,7 @@ inherits = 0.35mm FAST
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||
single_extruder_multi_material_priming = 0
|
||||
|
||||
# MK2.5 MMU2 0.6 nozzle#
|
||||
# MK2.5 MMU2 0.6 nozzle #
|
||||
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
|
||||
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
||||
# alias = 0.35mm SOLUBLE FULL
|
||||
@ -1122,7 +1124,7 @@ support_material_interface_extruder = 5
|
||||
top_infill_extrusion_width = 0.6
|
||||
support_material_extrusion_width = 0.6
|
||||
|
||||
[print:0.35mm SOLUBLE INTERFACE 0.6 nozzle @MK2.5]
|
||||
[print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5]
|
||||
inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5
|
||||
# alias = 0.35mm SOLUBLE INTERFACE
|
||||
support_material_extruder = 0
|
||||
@ -1170,7 +1172,7 @@ top_solid_infill_speed = 40
|
||||
fill_pattern = gyroid
|
||||
fill_density = 15%
|
||||
perimeters = 3
|
||||
bridge_acceleration = 800
|
||||
bridge_acceleration = 1000
|
||||
|
||||
[print:0.15mm QUALITY @MINI]
|
||||
inherits = *0.15mm*; *MINI*
|
||||
@ -1478,6 +1480,7 @@ filament_max_volumetric_speed = 1.35
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
|
||||
disable_fan_first_layers = 4
|
||||
extrusion_multiplier = 1.15
|
||||
filament_density = 1.22
|
||||
filament_colour = #F2F200
|
||||
start_filament_gcode = "M900 K0 ; Filament gcode"
|
||||
|
||||
@ -1508,7 +1511,7 @@ bridge_fan_speed = 80
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 1
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.2
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
@ -1521,8 +1524,10 @@ max_fan_speed = 90
|
||||
min_fan_speed = 70
|
||||
start_filament_gcode = "M900 K0"; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 0.4
|
||||
filament_retract_length = 0.8
|
||||
filament_deretract_speed = 25
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
|
||||
[filament:ColorFabb bronzeFill]
|
||||
inherits = *PLA*
|
||||
@ -1710,7 +1715,7 @@ filament_type = ASA
|
||||
|
||||
[filament:Prusament ASA]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
filament_cost = 35.28
|
||||
filament_density = 1.07
|
||||
fan_always_on = 1
|
||||
@ -1784,6 +1789,58 @@ filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
|
||||
[filament:SainSmart TPU]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = SainSmart
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_retract_length = 1
|
||||
filament_retract_speed = nil
|
||||
filament_deretract_speed = 25
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
[filament:Filatech FilaFlex40]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Filatech
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 51.45
|
||||
filament_density = 1.22
|
||||
filament_retract_length = 2
|
||||
filament_retract_speed = 50
|
||||
filament_deretract_speed = 25
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
[filament:Polymaker PC-Max]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Polymaker
|
||||
@ -1816,7 +1873,7 @@ temperature = 195
|
||||
|
||||
[filament:Prusa ABS]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
|
||||
@ -1842,7 +1899,7 @@ filament_vendor = Generic
|
||||
[filament:Prusament ASA @MMU2]
|
||||
inherits = *ABS MMU2*
|
||||
# alias = Prusament ASA
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
filament_cost = 35.28
|
||||
filament_density = 1.07
|
||||
fan_always_on = 1
|
||||
@ -1866,11 +1923,11 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{el
|
||||
[filament:Prusa ABS @MMU2]
|
||||
inherits = *ABS MMU2*
|
||||
# alias = Prusa ABS
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
|
||||
[filament:Prusa HIPS]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.3
|
||||
filament_density = 1.04
|
||||
bridge_fan_speed = 50
|
||||
@ -1889,7 +1946,7 @@ temperature = 220
|
||||
|
||||
[filament:Prusa PET]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
||||
@ -1897,7 +1954,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2S
|
||||
|
||||
[filament:Prusament PETG]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
@ -1908,7 +1965,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2S
|
||||
[filament:Prusa PET @0.6 nozzle]
|
||||
inherits = *PET06*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
||||
@ -1916,7 +1973,7 @@ filament_notes = "List of manufacturers tested with standard PET print settings:
|
||||
[filament:Prusament PETG @0.6 nozzle]
|
||||
inherits = *PET06*
|
||||
# alias = Prusament PETG
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
@ -1955,13 +2012,13 @@ filament_vendor = Generic
|
||||
[filament:Prusa PET @MMU2]
|
||||
inherits = *PET MMU2*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
|
||||
[filament:Prusament PETG @MMU2]
|
||||
inherits = *PET MMU2*
|
||||
filament_type = PETG
|
||||
# alias = Prusament PETG
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
|
||||
[filament:Generic PET @MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
@ -1971,24 +2028,24 @@ filament_vendor = Generic
|
||||
[filament:Prusa PET @MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
|
||||
[filament:Prusament PETG @MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
filament_type = PETG
|
||||
# alias = Prusament PETG
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
|
||||
[filament:Prusa PLA]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 25.4
|
||||
filament_density = 1.24
|
||||
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFiberlogy PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nAmazonBasics PLA"
|
||||
|
||||
[filament:Prusament PLA]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
temperature = 215
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
@ -2016,11 +2073,11 @@ filament_vendor = Generic
|
||||
|
||||
[filament:Prusa PLA @MMU2]
|
||||
inherits = *PLA MMU2*
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
|
||||
[filament:Prusament PLA @MMU2]
|
||||
inherits = *PLA MMU2*
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
|
||||
[filament:SemiFlex or Flexfill 98A]
|
||||
inherits = *FLEX*
|
||||
@ -2269,7 +2326,7 @@ filament_notes = "List of manufacturers tested with standard PET print settings:
|
||||
[filament:Prusa PET @MMU1]
|
||||
inherits = *PETMMU1*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
||||
@ -2277,7 +2334,7 @@ filament_notes = "List of manufacturers tested with standard PET print settings:
|
||||
[filament:Prusament PETG @MMU1]
|
||||
inherits = *PETMMU1*
|
||||
# alias = Prusament PETG
|
||||
filament_vendor = Prusa Polymers
|
||||
filament_vendor = Prusa Research
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
@ -2327,17 +2384,23 @@ compatible_printers_condition = printer_model=="MK2SMM"
|
||||
[filament:Generic PET @MINI]
|
||||
inherits = Generic PET; *PETMINI*
|
||||
# alias = Generic PET
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
||||
|
||||
[filament:Generic ABS @MINI]
|
||||
inherits = Generic ABS; *ABSMINI*
|
||||
# alias = Generic ABS
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
|
||||
[filament:Prusament PETG @MINI]
|
||||
inherits = Prusament PETG; *PETMINI*
|
||||
# alias = Prusament PETG
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_density = 1.27
|
||||
filament_cost = 24.99
|
||||
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
||||
|
||||
[filament:Prusament PETG @0.6 nozzle MINI]
|
||||
@ -2345,6 +2408,8 @@ inherits = Prusament PETG; *PETMINI06*
|
||||
# alias = Prusament PETG
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_density = 1.27
|
||||
filament_cost = 24.99
|
||||
|
||||
[filament:Generic PET @0.6 nozzle MINI]
|
||||
inherits = Generic PET; *PETMINI06*
|
||||
@ -2366,72 +2431,97 @@ slowdown_below_layer_time = 15
|
||||
disable_fan_first_layers = 4
|
||||
filament_type = ASA
|
||||
filament_colour = #FFF2EC
|
||||
filament_cost = 35.28
|
||||
filament_density = 1.07
|
||||
|
||||
[filament:Fillamentum Flexfill 98A @MINI]
|
||||
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
|
||||
# alias = Fillamentum Flexfill 98A
|
||||
filament_vendor = Fillamentum
|
||||
first_layer_temperature = 240
|
||||
temperature = 240
|
||||
filament_max_volumetric_speed = 1.35
|
||||
|
||||
[filament:Semiflex or Flex 98A @MINI]
|
||||
[filament:Generic FLEX @MINI]
|
||||
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
|
||||
# alias = Semiflex or Flex 98A
|
||||
filament_vendor = Generic
|
||||
fan_always_on = 0
|
||||
bridge_fan_speed = 80
|
||||
first_layer_temperature = 240
|
||||
temperature = 240
|
||||
filament_retract_length = 3
|
||||
filament_max_volumetric_speed = 1.35
|
||||
|
||||
[filament:AmazonBasics TPU @MINI]
|
||||
inherits = *FLEXMINI*
|
||||
# alias = AmazonBasics TPU
|
||||
filament_vendor = AmazonBasics
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_max_volumetric_speed = 1.5
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 235
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
max_fan_speed = 60
|
||||
min_fan_speed = 60
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 5
|
||||
filament_cost = 19.99
|
||||
filament_density = 1.21
|
||||
|
||||
[filament:SainSmart TPU @MINI]
|
||||
inherits = *FLEXMINI*
|
||||
# alias = SainSmart TPU
|
||||
filament_vendor = SainSmart
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_max_volumetric_speed = 1.8
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 235
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
max_fan_speed = 60
|
||||
min_fan_speed = 60
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 5
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
|
||||
[filament:Filatech FilaFlex40 TPU @MINI]
|
||||
[filament:Filatech FilaFlex40 @MINI]
|
||||
inherits = *FLEXMINI*
|
||||
# alias = Filatech FilaFlex40
|
||||
filament_vendor = Filatech
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_max_volumetric_speed = 1.8
|
||||
fan_always_on = 1
|
||||
first_layer_temperature = 240
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_bed_temperature = 55
|
||||
temperature = 240
|
||||
bed_temperature = 65
|
||||
filament_retract_length = 6
|
||||
bed_temperature = 55
|
||||
filament_retract_length = 4
|
||||
filament_retract_before_travel = 5
|
||||
bridge_fan_speed = 80
|
||||
max_fan_speed = 40
|
||||
min_fan_speed = 40
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
filament_cost = 51.45
|
||||
|
||||
[filament:Fillamentum Flexfill 92A @MINI]
|
||||
inherits = *FLEX*
|
||||
inherits = *FLEXMINI*
|
||||
# alias = Fillamentum Flexfill 92A
|
||||
filament_vendor = Fillamentum
|
||||
first_layer_temperature = 245
|
||||
temperature = 245
|
||||
filament_retract_length = 3
|
||||
filament_retract_speed = 40
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_retract_before_travel = 7
|
||||
filament_wipe = 0
|
||||
filament_density = 1.20
|
||||
filament_cost = 33.95
|
||||
bridge_fan_speed = 70
|
||||
fan_always_on = 1
|
||||
cooling = 0
|
||||
@ -2450,23 +2540,26 @@ first_layer_temperature = 265
|
||||
first_layer_bed_temperature = 90
|
||||
temperature = 265
|
||||
filament_type = CPE
|
||||
filament_cost = 54.1
|
||||
filament_density = 1.25
|
||||
|
||||
[filament:ColorFabb nGen @MINI]
|
||||
inherits = ColorFabb nGen; *PETMINI*
|
||||
# alias = ColorFabb nGen
|
||||
|
||||
[filament:ColorFabb nGen flex @MINI]
|
||||
inherits = ColorFabb nGen flex; *FLEXMINI*
|
||||
# alias = ColorFabb nGen flex
|
||||
filament_max_volumetric_speed = 4
|
||||
filament_cost = 52.46
|
||||
filament_density = 1.2
|
||||
|
||||
[filament:E3D PC-ABS @MINI]
|
||||
inherits = E3D PC-ABS; *ABSMINI*
|
||||
# alias = E3D PC-ABS
|
||||
filament_density = 1.05
|
||||
filament_cost = 28.80
|
||||
|
||||
[filament:Fillamentum ABS @MINI]
|
||||
inherits = Fillamentum ABS; *ABSMINI*
|
||||
# alias = Fillamentum ABS
|
||||
filament_cost = 32.4
|
||||
filament_density = 1.04
|
||||
|
||||
[filament:Fillamentum ASA @MINI]
|
||||
inherits = Fillamentum ASA; *ABSMINI*
|
||||
@ -2484,6 +2577,8 @@ slowdown_below_layer_time = 15
|
||||
disable_fan_first_layers = 4
|
||||
filament_type = ASA
|
||||
filament_colour = #FFF2EC
|
||||
filament_cost = 38.7
|
||||
filament_density = 1.07
|
||||
|
||||
[filament:Polymaker PC-Max @MINI]
|
||||
inherits = Polymaker PC-Max; *ABSMINI*
|
||||
@ -2495,11 +2590,15 @@ first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 270
|
||||
temperature = 270
|
||||
bridge_fan_speed = 0
|
||||
filament_cost = 77.3
|
||||
filament_density = 1.20
|
||||
|
||||
[filament:Prusa ABS @MINI]
|
||||
inherits = *ABSMINI*
|
||||
# alias = Prusa ABS
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
|
||||
[filament:Generic HIPS @MINI]
|
||||
inherits = *ABSMINI*
|
||||
@ -2588,7 +2687,7 @@ filament_type = EDGE
|
||||
[filament:Prusa PET @MINI]
|
||||
inherits = *PETMINI*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
||||
@ -2596,7 +2695,7 @@ compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.
|
||||
[filament:Prusa PET @0.6 nozzle MINI]
|
||||
inherits = *PETMINI06*
|
||||
# alias = Prusa PET
|
||||
filament_vendor = Prusa
|
||||
filament_vendor = Made for Prusa
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
|
||||
@ -2849,21 +2948,21 @@ initial_exposure_time = 30
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Cyan Super Low Odor @0.025]
|
||||
[sla_material:Prusa Super Low Odor Cyan Tough @0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 5
|
||||
initial_exposure_time = 35
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Magenta Super Low Odor @0.025]
|
||||
[sla_material:Prusa Super Low Odor Magenta Tough @0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 5
|
||||
initial_exposure_time = 35
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Yellow Super Low Odor @0.025]
|
||||
[sla_material:Prusa Super Low Odor Yellow Tough @0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 5
|
||||
initial_exposure_time = 35
|
||||
@ -3127,42 +3226,42 @@ initial_exposure_time = 35
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
## [sla_material:Prusa Beige Super Low Odor @0.05]
|
||||
## [sla_material:Prusa Super Low Odor Beige Tough @0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 7.5
|
||||
## initial_exposure_time = 35
|
||||
## material_type = Tough
|
||||
## material_vendor = Prusa
|
||||
|
||||
## [sla_material:Prusa White Super Low Odor @0.05]
|
||||
## [sla_material:Prusa Super Low Odor White Tough @0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 6.5
|
||||
## initial_exposure_time = 35
|
||||
## material_type = Tough
|
||||
## material_vendor = Prusa
|
||||
|
||||
## [sla_material:Prusa Grey Super Low Odor @0.05]
|
||||
## [sla_material:Prusa Super Low Odor Grey Tough @0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 6.5
|
||||
## initial_exposure_time = 35
|
||||
## material_type = Tough
|
||||
## material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Cyan Super Low Odor @0.05]
|
||||
[sla_material:Prusa Super Low Odor Cyan Tough @0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 35
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Magenta Super Low Odor @0.05]
|
||||
[sla_material:Prusa Super Low Odor Magenta Tough @0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 35
|
||||
material_type = Tough
|
||||
material_vendor = Prusa
|
||||
|
||||
[sla_material:Prusa Yellow Super Low Odor @0.05]
|
||||
[sla_material:Prusa Super Low Odor Yellow Tough @0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 35
|
||||
@ -3249,7 +3348,7 @@ material_vendor = Prusa
|
||||
## exposure_time = 9
|
||||
## initial_exposure_time = 35
|
||||
|
||||
[sla_material:Prusa Clear Flexible @0.05]
|
||||
[sla_material:Prusa Transparent Flexible @0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 5
|
||||
initial_exposure_time = 15
|
||||
@ -3488,7 +3587,7 @@ printer_model = MK2SMM
|
||||
inherits = *multimaterial*
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
|
||||
[printer:*mm-multi*]
|
||||
@ -3498,7 +3597,7 @@ end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.
|
||||
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
@ -3608,7 +3707,7 @@ machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
|
||||
@ -3650,7 +3749,7 @@ single_extruder_multi_material = 1
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S]
|
||||
@ -3695,7 +3794,7 @@ machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL @MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
|
||||
@ -3716,7 +3815,7 @@ nozzle_diameter = 0.25
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2s*
|
||||
@ -3749,7 +3848,7 @@ single_extruder_multi_material = 1
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
|
||||
@ -3861,7 +3960,7 @@ default_filament_profile = Prusament PLA @MMU2
|
||||
inherits = *mm2*
|
||||
single_extruder_multi_material = 0
|
||||
default_filament_profile = Prusament PLA
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
|
||||
@ -3881,7 +3980,7 @@ max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2]
|
||||
@ -3892,14 +3991,14 @@ inherits = *mm2*
|
||||
machine_max_acceleration_e = 8000,8000
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S Single]
|
||||
inherits = *mm2s*
|
||||
single_extruder_multi_material = 0
|
||||
default_filament_profile = Prusament PLA
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle]
|
||||
@ -3919,7 +4018,7 @@ max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
retract_lift = 0.15
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S]
|
||||
@ -3927,7 +4026,7 @@ inherits = *mm2s*
|
||||
machine_max_acceleration_e = 8000,8000
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
## 0.6mm nozzle MMU2/S printer profiles
|
||||
@ -3956,7 +4055,7 @@ printer_model = MINI
|
||||
printer_technology = FFF
|
||||
printer_variant = 0.4
|
||||
printer_vendor =
|
||||
thumbnails = 240x320,220x165,16x16
|
||||
thumbnails = 16x16,220x124
|
||||
bed_shape = 0x0,180x0,180x180,0x180
|
||||
default_filament_profile = "Prusament PLA"
|
||||
default_print_profile = 0.15mm QUALITY @MINI
|
||||
@ -3993,8 +4092,8 @@ retract_lift_below = 179
|
||||
retract_layer_change = 0
|
||||
silent_mode = 0
|
||||
remaining_times = 1
|
||||
start_gcode = M569 S0 E \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
|
||||
end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y180 F4200 ; park print head\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM84 ; disable motors
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
|
||||
end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y180 F4200 ; park print head\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
|
||||
extruder_colour =
|
||||
|
||||
@ -4002,7 +4101,9 @@ extruder_colour =
|
||||
inherits = Original Prusa MINI
|
||||
printer_variant = 0.25
|
||||
nozzle_diameter = 0.25
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MINI
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
|
||||
retract_length = 3
|
||||
retract_lift = 0.15
|
||||
retract_speed = 70
|
||||
@ -4010,13 +4111,15 @@ deretract_speed = 40
|
||||
wipe = 1
|
||||
retract_before_wipe = 70%
|
||||
retract_before_travel = 1
|
||||
start_gcode = M569 S0 E \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
|
||||
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
|
||||
|
||||
[printer:Original Prusa MINI 0.6 nozzle]
|
||||
inherits = Original Prusa MINI
|
||||
printer_variant = 0.6
|
||||
nozzle_diameter = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6 nozzle MINI
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||
retract_length = 3.5
|
||||
retract_lift = 0.2
|
||||
retract_speed = 70
|
||||
|
||||
Loading…
Reference in New Issue
Block a user