Merge branch 'master' into fs_realtime_simplify

resources/shaders/gouraud_mod.fs

@@ -0,0 +1,106 @@
+#version 110
+
+#define INTENSITY_CORRECTION 0.6
+
+// normalized values for (-0.6/1.31, 0.6/1.31, 1./1.31)
+const vec3 LIGHT_TOP_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);
+#define LIGHT_TOP_DIFFUSE    (0.8 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SPECULAR   (0.125 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SHININESS  20.0
+
+// normalized values for (1./1.43, 0.2/1.43, 1./1.43)
+const vec3 LIGHT_FRONT_DIR = vec3(0.6985074, 0.1397015, 0.6985074);
+#define LIGHT_FRONT_DIFFUSE  (0.3 * INTENSITY_CORRECTION)
+
+#define INTENSITY_AMBIENT    0.3
+
+const vec3 ZERO = vec3(0.0, 0.0, 0.0);
+const vec3 GREEN = vec3(0.0, 0.7, 0.0);
+const vec3 YELLOW = vec3(0.5, 0.7, 0.0);
+const vec3 RED = vec3(0.7, 0.0, 0.0);
+const vec3 WHITE = vec3(1.0, 1.0, 1.0);
+const float EPSILON = 0.0001;
+const float BANDS_WIDTH = 10.0;
+
+struct PrintVolumeDetection
+{
+	// 0 = rectangle, 1 = circle, 2 = custom, 3 = invalid
+	int type;
+    // type = 0 (rectangle):
+    // x = min.x, y = min.y, z = max.x, w = max.y
+    // type = 1 (circle):
+    // x = center.x, y = center.y, z = radius
+	vec4 xy_data;
+    // x = min z, y = max z
+	vec2 z_data;
+};
+
+struct SlopeDetection
+{
+    bool actived;
+	float normal_z;
+    mat3 volume_world_normal_matrix;
+};
+
+uniform vec4 uniform_color;
+uniform SlopeDetection slope;
+
+uniform bool offset_depth_buffer;
+
+#ifdef ENABLE_ENVIRONMENT_MAP
+    uniform sampler2D environment_tex;
+    uniform bool use_environment_tex;
+#endif // ENABLE_ENVIRONMENT_MAP
+
+varying vec3 clipping_planes_dots;
+
+// x = diffuse, y = specular;
+varying vec2 intensity;
+
+uniform PrintVolumeDetection print_volume;
+
+varying vec4 model_pos;
+varying vec4 world_pos;
+varying float world_normal_z;
+varying vec3 eye_normal;
+
+void main()
+{
+    if (any(lessThan(clipping_planes_dots, ZERO)))
+        discard;
+    vec3  color = uniform_color.rgb;
+    float alpha = uniform_color.a;
+
+    if (slope.actived && world_normal_z < slope.normal_z - EPSILON) {
+        color = vec3(0.7, 0.7, 1.0);
+        alpha = 1.0;
+    }
+	
+    // if the fragment is outside the print volume -> use darker color
+	vec3 pv_check_min = ZERO;
+	vec3 pv_check_max = ZERO;
+    if (print_volume.type == 0) {
+		// rectangle
+		pv_check_min = world_pos.xyz - vec3(print_volume.xy_data.x, print_volume.xy_data.y, print_volume.z_data.x);
+		pv_check_max = world_pos.xyz - vec3(print_volume.xy_data.z, print_volume.xy_data.w, print_volume.z_data.y);
+	}
+	else if (print_volume.type == 1) {
+		// circle
+		float delta_radius = print_volume.xy_data.z - distance(world_pos.xy, print_volume.xy_data.xy);
+		pv_check_min = vec3(delta_radius, 0.0, world_pos.z - print_volume.z_data.x);
+		pv_check_max = vec3(0.0, 0.0, world_pos.z - print_volume.z_data.y);
+	}	
+	color = (any(lessThan(pv_check_min, ZERO)) || any(greaterThan(pv_check_max, ZERO))) ? mix(color, ZERO, 0.3333) : color;
+	
+#ifdef ENABLE_ENVIRONMENT_MAP
+    if (use_environment_tex)
+        gl_FragColor = vec4(0.45 * texture2D(environment_tex, normalize(eye_normal).xy * 0.5 + 0.5).xyz + 0.8 * color * intensity.x, alpha);
+    else
+#endif
+        gl_FragColor = vec4(vec3(intensity.y) + color * intensity.x, alpha);
+		
+    // In the support painting gizmo and the seam painting gizmo are painted triangles rendered over the already
+    // rendered object. To resolved z-fighting between previously rendered object and painted triangles, values
+    // inside the depth buffer are offset by small epsilon for painted triangles inside those gizmos.
+    gl_FragDepth = gl_FragCoord.z - (offset_depth_buffer ? EPSILON : 0.0);
+}

resources/shaders/gouraud_mod.vs

@@ -0,0 +1,73 @@
+#version 110
+
+#define INTENSITY_CORRECTION 0.6
+
+// normalized values for (-0.6/1.31, 0.6/1.31, 1./1.31)
+const vec3 LIGHT_TOP_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);
+#define LIGHT_TOP_DIFFUSE    (0.8 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SPECULAR   (0.125 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SHININESS  20.0
+
+// normalized values for (1./1.43, 0.2/1.43, 1./1.43)
+const vec3 LIGHT_FRONT_DIR = vec3(0.6985074, 0.1397015, 0.6985074);
+#define LIGHT_FRONT_DIFFUSE  (0.3 * INTENSITY_CORRECTION)
+//#define LIGHT_FRONT_SPECULAR (0.0 * INTENSITY_CORRECTION)
+//#define LIGHT_FRONT_SHININESS 5.0
+
+#define INTENSITY_AMBIENT    0.3
+
+const vec3 ZERO = vec3(0.0, 0.0, 0.0);
+
+struct SlopeDetection
+{
+    bool actived;
+	float normal_z;
+    mat3 volume_world_normal_matrix;
+};
+
+uniform mat4 volume_world_matrix;
+uniform SlopeDetection slope;
+
+// Clipping plane, x = min z, y = max z. Used by the FFF and SLA previews to clip with a top / bottom plane.
+uniform vec2 z_range;
+// Clipping plane - general orientation. Used by the SLA gizmo.
+uniform vec4 clipping_plane;
+
+// x = diffuse, y = specular;
+varying vec2 intensity;
+
+varying vec3 clipping_planes_dots;
+
+varying vec4 model_pos;
+varying vec4 world_pos;
+varying float world_normal_z;
+varying vec3 eye_normal;
+
+void main()
+{
+	// First transform the normal into camera space and normalize the result.
+	eye_normal = normalize(gl_NormalMatrix * gl_Normal);
+
+	// Compute the cos of the angle between the normal and lights direction. The light is directional so the direction is constant for every vertex.
+	// Since these two are normalized the cosine is the dot product. We also need to clamp the result to the [0,1] range.
+	float NdotL = max(dot(eye_normal, LIGHT_TOP_DIR), 0.0);
+
+	intensity.x = INTENSITY_AMBIENT + NdotL * LIGHT_TOP_DIFFUSE;
+	vec3 position = (gl_ModelViewMatrix * gl_Vertex).xyz;
+	intensity.y = LIGHT_TOP_SPECULAR * pow(max(dot(-normalize(position), reflect(-LIGHT_TOP_DIR, eye_normal)), 0.0), LIGHT_TOP_SHININESS);
+
+	// Perform the same lighting calculation for the 2nd light source (no specular applied).
+	NdotL = max(dot(eye_normal, LIGHT_FRONT_DIR), 0.0);
+	intensity.x += NdotL * LIGHT_FRONT_DIFFUSE;
+
+    model_pos = gl_Vertex;
+    // Point in homogenous coordinates.
+    world_pos = volume_world_matrix * gl_Vertex;
+
+    // z component of normal vector in world coordinate used for slope shading
+    world_normal_z = slope.actived ? (normalize(slope.volume_world_normal_matrix * gl_Normal)).z : 0.0;
+
+    gl_Position = ftransform();
+    // Fill in the scalars for fragment shader clipping. Fragments with any of these components lower than zero are discarded.
+    clipping_planes_dots = vec3(dot(world_pos, clipping_plane), world_pos.z - z_range.x, z_range.y - world_pos.z);
+}

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -720,6 +720,9 @@ void GCodeProcessor::UsedFilaments::process_caches(GCodeProcessor* processor)
 void GCodeProcessor::Result::reset() {
     moves = std::vector<GCodeProcessor::MoveVertex>();
     bed_shape = Pointfs();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    max_print_height = 0.0f;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     settings_ids.reset();
     extruders_count = 0;
     extruder_colors = std::vector<std::string>();
@@ -734,6 +737,9 @@ void GCodeProcessor::Result::reset() {
     moves.clear();
     lines_ends.clear();
     bed_shape = Pointfs();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    max_print_height = 0.0f;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     settings_ids.reset();
     extruders_count = 0;
     extruder_colors = std::vector<std::string>();
@@ -883,6 +889,10 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
     const ConfigOptionFloatOrPercent* first_layer_height = config.option<ConfigOptionFloatOrPercent>("first_layer_height");
     if (first_layer_height != nullptr)
         m_first_layer_height = std::abs(first_layer_height->value);
+
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_result.max_print_height = config.max_print_height;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
@@ -1112,6 +1122,12 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
     const ConfigOptionFloatOrPercent* first_layer_height = config.option<ConfigOptionFloatOrPercent>("first_layer_height");
     if (first_layer_height != nullptr)
         m_first_layer_height = std::abs(first_layer_height->value);
+
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    const ConfigOptionFloat* max_print_height = config.option<ConfigOptionFloat>("max_print_height");
+    if (max_print_height != nullptr)
+        m_result.max_print_height = max_print_height->value;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void GCodeProcessor::enable_stealth_time_estimator(bool enabled)

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -351,6 +351,9 @@ namespace Slic3r {
             // Positions of ends of lines of the final G-code this->filename after TimeProcessor::post_process() finalizes the G-code.
             std::vector<size_t> lines_ends;
             Pointfs bed_shape;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+            float max_print_height;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
             SettingsIds settings_ids;
             size_t extruders_count;
             std::vector<std::string> extruder_colors;

src/libslic3r/Geometry.cpp

@@ -311,6 +311,15 @@ bool directions_parallel(double angle1, double angle2, double max_diff)
     return diff < max_diff || fabs(diff - PI) < max_diff;
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+bool directions_perpendicular(double angle1, double angle2, double max_diff)
+{
+    double diff = fabs(angle1 - angle2);
+    max_diff += EPSILON;
+    return fabs(diff - 0.5 * PI) < max_diff || fabs(diff - 1.5 * PI) < max_diff;
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 template<class T>
 bool contains(const std::vector<T> &vector, const Point &point)
 {

src/libslic3r/Geometry.hpp

@@ -84,6 +84,32 @@ static inline bool is_ccw(const Polygon &poly)
     return o == ORIENTATION_CCW;
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+// returns true if the given polygons are identical
+static inline bool are_approx(const Polygon& lhs, const Polygon& rhs)
+{
+    if (lhs.points.size() != rhs.points.size())
+        return false;
+
+    size_t rhs_id = 0;
+    while (rhs_id < rhs.points.size()) {
+        if (rhs.points[rhs_id].isApprox(lhs.points.front()))
+            break;
+        ++rhs_id;
+    }
+
+    if (rhs_id == rhs.points.size())
+        return false;
+
+    for (size_t i = 0; i < lhs.points.size(); ++i) {
+        if (!lhs.points[i].isApprox(rhs.points[(i + rhs_id) % lhs.points.size()]))
+            return false;
+    }
+
+    return true;
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 inline bool ray_ray_intersection(const Vec2d &p1, const Vec2d &v1, const Vec2d &p2, const Vec2d &v2, Vec2d &res)
 {
     double denom = v1(0) * v2(1) - v2(0) * v1(1);
@@ -336,6 +362,9 @@ Polygon convex_hull(Points points);
 Polygon convex_hull(const Polygons &polygons);
 
 bool directions_parallel(double angle1, double angle2, double max_diff = 0);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+bool directions_perpendicular(double angle1, double angle2, double max_diff = 0);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 template<class T> bool contains(const std::vector<T> &vector, const Point &point);
 template<typename T> T rad2deg(T angle) { return T(180.0) * angle / T(PI); }
 double rad2deg_dir(double angle);

src/libslic3r/Line.cpp

@@ -63,6 +63,13 @@ bool Line::parallel_to(double angle) const
     return Slic3r::Geometry::directions_parallel(this->direction(), angle);
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+bool Line::perpendicular_to(double angle) const
+{
+    return Slic3r::Geometry::directions_perpendicular(this->direction(), angle);
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 bool Line::intersection(const Line &l2, Point *intersection) const
 {
     const Line  &l1  = *this;

src/libslic3r/Line.hpp

@@ -105,6 +105,10 @@ public:
     double perp_distance_to(const Point &point) const;
     bool   parallel_to(double angle) const;
     bool   parallel_to(const Line &line) const { return this->parallel_to(line.direction()); }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool   perpendicular_to(double angle) const;
+    bool   perpendicular_to(const Line& line) const { return this->perpendicular_to(line.direction()); }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     double atan2_() const { return atan2(this->b(1) - this->a(1), this->b(0) - this->a(0)); }
     double orientation() const;
     double direction() const;

src/libslic3r/Model.cpp

@@ -26,6 +26,35 @@
 
 namespace Slic3r {
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+ModelInstanceEPrintVolumeState printbed_collision_state(const Polygon& printbed_shape, double print_volume_height, const Polygon& obj_hull_2d, double obj_min_z, double obj_max_z)
+{
+    if (!Geometry::intersects(printbed_shape, obj_hull_2d))
+        return ModelInstancePVS_Fully_Outside;
+
+    bool contained_xy = true;
+    for (const Point& p : obj_hull_2d) {
+        if (!printbed_shape.contains(p)) {
+            contained_xy = false;
+            break;
+        }
+    }
+    const bool contained_z = -1e10 < obj_min_z && obj_max_z < print_volume_height;
+    return (contained_xy && contained_z) ? ModelInstancePVS_Inside : ModelInstancePVS_Partly_Outside;
+}
+
+ModelInstanceEPrintVolumeState printbed_collision_state(const Polygon& printbed_shape, double print_volume_height, const BoundingBoxf3& box)
+{
+    const Polygon box_hull_2d({
+        { scale_(box.min.x()), scale_(box.min.y()) },
+        { scale_(box.max.x()), scale_(box.min.y()) },
+        { scale_(box.max.x()), scale_(box.max.y()) },
+        { scale_(box.min.x()), scale_(box.max.y()) }
+        });
+    return printbed_collision_state(printbed_shape, print_volume_height, box_hull_2d, box.min.z(), box.max.z());
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 Model& Model::assign_copy(const Model &rhs)
 {
     this->copy_id(rhs);
@@ -330,6 +359,15 @@ BoundingBoxf3 Model::bounding_box() const
     return bb;
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+unsigned int Model::update_print_volume_state(const Polygon& printbed_shape, double print_volume_height)
+{
+    unsigned int num_printable = 0;
+    for (ModelObject* model_object : this->objects)
+        num_printable += model_object->check_instances_print_volume_state(printbed_shape, print_volume_height);
+    return num_printable;
+}
+#else
 unsigned int Model::update_print_volume_state(const BoundingBoxf3 &print_volume)
 {
     unsigned int num_printable = 0;
@@ -337,6 +375,7 @@ unsigned int Model::update_print_volume_state(const BoundingBoxf3 &print_volume)
         num_printable += model_object->check_instances_print_volume_state(print_volume);
     return num_printable;
 }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 bool Model::center_instances_around_point(const Vec2d &point)
 {
@@ -1529,6 +1568,38 @@ double ModelObject::get_instance_max_z(size_t instance_idx) const
     return max_z + inst->get_offset(Z);
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+unsigned int ModelObject::check_instances_print_volume_state(const Polygon& printbed_shape, double print_volume_height)
+{
+    unsigned int num_printable = 0;
+    enum {
+        INSIDE = 1,
+        OUTSIDE = 2
+    };
+    for (ModelInstance* model_instance : this->instances) {
+        unsigned int inside_outside = 0;
+        for (const ModelVolume* vol : this->volumes)
+            if (vol->is_model_part()) {
+                const Transform3d matrix = model_instance->get_matrix() * vol->get_matrix();
+                const BoundingBoxf3 bb = vol->mesh().transformed_bounding_box(matrix, 0.0);
+                const Polygon volume_hull_2d = its_convex_hull_2d_above(vol->mesh().its, matrix.cast<float>(), 0.0f);
+                ModelInstanceEPrintVolumeState state = printbed_collision_state(printbed_shape, print_volume_height, volume_hull_2d, bb.min.z(), bb.max.z());
+                if (state == ModelInstancePVS_Inside)
+                    inside_outside |= INSIDE;
+                else if (state == ModelInstancePVS_Fully_Outside)
+                    inside_outside |= OUTSIDE;
+                else
+                    inside_outside |= INSIDE | OUTSIDE;
+            }
+        model_instance->print_volume_state =
+            (inside_outside == (INSIDE | OUTSIDE)) ? ModelInstancePVS_Partly_Outside :
+            (inside_outside == INSIDE) ? ModelInstancePVS_Inside : ModelInstancePVS_Fully_Outside;
+        if (inside_outside == INSIDE)
+            ++num_printable;
+    }
+    return num_printable;
+}
+#else
 unsigned int ModelObject::check_instances_print_volume_state(const BoundingBoxf3& print_volume)
 {
     unsigned int num_printable = 0;
@@ -1556,6 +1627,7 @@ unsigned int ModelObject::check_instances_print_volume_state(const BoundingBoxf3
     }
     return num_printable;
 }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 void ModelObject::print_info() const
 {

src/libslic3r/Model.hpp

@@ -367,7 +367,11 @@ public:
     double get_instance_max_z(size_t instance_idx) const;
 
     // Called by Print::validate() from the UI thread.
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    unsigned int check_instances_print_volume_state(const Polygon& printbed_shape, double print_volume_height);
+#else
     unsigned int check_instances_print_volume_state(const BoundingBoxf3& print_volume);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     // Print object statistics to console.
     void print_info() const;
@@ -904,6 +908,14 @@ enum ModelInstanceEPrintVolumeState : unsigned char
     ModelInstanceNum_BedStates
 };
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+// return the state of the given object's volume (extrusion along z of obj_hull_2d from obj_min_z to obj_max_z)
+// with respect to the given print volume (extrusion along z of printbed_shape from zero to print_volume_height)
+ModelInstanceEPrintVolumeState printbed_collision_state(const Polygon& printbed_shape, double print_volume_height, const Polygon& obj_hull_2d, double obj_min_z, double obj_max_z);
+// return the state of the given box
+// with respect to the given print volume (extrusion along z of printbed_shape from zero to print_volume_height)
+ModelInstanceEPrintVolumeState printbed_collision_state(const Polygon& printbed_shape, double print_volume_height, const BoundingBoxf3& box);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 // A single instance of a ModelObject.
 // Knows the affine transformation of an object.
@@ -1109,8 +1121,12 @@ public:
     BoundingBoxf3 bounding_box() const;
     // Set the print_volume_state of PrintObject::instances, 
     // return total number of printable objects.
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    unsigned int  update_print_volume_state(const Polygon& printbed_shape, double print_volume_height);
+#else
     unsigned int  update_print_volume_state(const BoundingBoxf3 &print_volume);
-	// Returns true if any ModelObject was modified.
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // Returns true if any ModelObject was modified.
     bool 		  center_instances_around_point(const Vec2d &point);
     void 		  translate(coordf_t x, coordf_t y, coordf_t z) { for (ModelObject *o : this->objects) o->translate(x, y, z); }
     TriangleMesh  mesh() const;

src/libslic3r/SupportMaterial.cpp

@@ -1703,15 +1703,18 @@ static inline std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupport
         // Don't want to print a layer below the first layer height as it may not stick well.
         //FIXME there may be a need for a single layer support, then one may decide to print it either as a bottom contact or a top contact
         // and it may actually make sense to do it with a thinner layer than the first layer height.
-        const coordf_t min_print_z = slicing_params.raft_layers() > 1 ? slicing_params.raft_interface_top_z + support_layer_height_min + EPSILON : slicing_params.first_print_layer_height - EPSILON;
+        if (print_z < slicing_params.first_print_layer_height - EPSILON) {
-        if (print_z < min_print_z) {
             // This contact layer is below the first layer height, therefore not printable. Don't support this surface.
             return std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupportMaterial::MyLayer*>(nullptr, nullptr);
-        } else if (print_z < slicing_params.first_print_layer_height + EPSILON) {
+        }
-            // Align the layer with the 1st layer height.
+        const bool     has_raft    = slicing_params.raft_layers() > 1;
-            print_z  = slicing_params.first_print_layer_height;
+        const coordf_t min_print_z = has_raft ? slicing_params.raft_contact_top_z : slicing_params.first_print_layer_height;
-            bottom_z = 0;
+        if (print_z < min_print_z + support_layer_height_min) {
-            height   = slicing_params.first_print_layer_height;
+            // Align the layer with the 1st layer height or the raft contact layer.
+            // With raft active, any contact layer below the raft_contact_top_z will be brought to raft_contact_top_z to extend the raft area.
+            print_z  = min_print_z;
+            bottom_z = has_raft ? slicing_params.raft_interface_top_z : 0;
+            height   = has_raft ? slicing_params.contact_raft_layer_height : min_print_z;
         } else {
             // Don't know the height of the top contact layer yet. The top contact layer is printed with a normal flow and 
             // its height will be set adaptively later on.
@@ -1727,9 +1730,9 @@ static inline std::pair<PrintObjectSupportMaterial::MyLayer*, PrintObjectSupport
             coordf_t bridging_print_z = layer.print_z - bridging_height - slicing_params.gap_support_object;
             if (bridging_print_z >= min_print_z) {
                 // Not below the first layer height means this layer is printable.
-                if (print_z < slicing_params.first_print_layer_height + EPSILON) {
+                if (print_z < min_print_z + support_layer_height_min) {
-                    // Align the layer with the 1st layer height.
+                    // Align the layer with the 1st layer height or the raft contact layer.
-                    bridging_print_z = slicing_params.first_print_layer_height;
+                    bridging_print_z = min_print_z;
                 }
                 if (bridging_print_z < print_z - EPSILON) {
                     // Allocate the new layer.
@@ -3108,7 +3111,7 @@ std::pair<PrintObjectSupportMaterial::MyLayersPtr, PrintObjectSupportMaterial::M
                 intermediate_layer.polygons);
             if (! bottom.empty()) {
                 //FIXME Remove non-printable tiny islands, let them be printed using the base support.
-                //bottom = offset(offset_ex(std::move(bottom), - minimum_island_radius), minimum_island_radius);
+                //bottom = opening(std::move(bottom), minimum_island_radius);
                 if (! bottom.empty()) {
                     MyLayer &layer_new = layer_allocate(layer_storage, layer_storage_mutex, type);
                     layer_new.polygons   = std::move(bottom);

src/libslic3r/Technologies.hpp

@@ -81,5 +81,9 @@
 // Enable rendering modifiers and similar objects always as transparent
 #define ENABLE_MODIFIERS_ALWAYS_TRANSPARENT (1 && ENABLE_2_4_0_ALPHA4)
 
+// Enable the fix for the detection of the out of bed state for sinking objects
+// and detection of out of bed using the bed perimeter
+#define ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS (1 && ENABLE_2_4_0_ALPHA4)
+
 
 #endif // _prusaslicer_technologies_h_

src/libslic3r/TriangleMesh.cpp

@@ -435,6 +435,31 @@ BoundingBoxf3 TriangleMesh::transformed_bounding_box(const Transform3d &trafo) c
     return bbox;
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+BoundingBoxf3 TriangleMesh::transformed_bounding_box(const Transform3d& trafo, double world_min_z) const
+{
+    BoundingBoxf3 bbox;
+    const Transform3f ftrafo = trafo.cast<float>();
+    for (const stl_triangle_vertex_indices& tri : its.indices) {
+        const Vec3f pts[3] = { ftrafo * its.vertices[tri(0)], ftrafo * its.vertices[tri(1)], ftrafo * its.vertices[tri(2)] };
+        int iprev = 2;
+        for (int iedge = 0; iedge < 3; ++iedge) {
+            const Vec3f& p1 = pts[iprev];
+            const Vec3f& p2 = pts[iedge];
+            if ((p1.z() < world_min_z && p2.z() > world_min_z) || (p2.z() < world_min_z && p1.z() > world_min_z)) {
+                // Edge crosses the z plane. Calculate intersection point with the plane.
+                const float t = (world_min_z - p1.z()) / (p2.z() - p1.z());
+                bbox.merge(Vec3f(p1.x() + (p2.x() - p1.x()) * t, p1.y() + (p2.y() - p1.y()) * t, world_min_z).cast<double>());
+            }
+            if (p2.z() >= world_min_z)
+                bbox.merge(p2.cast<double>());
+            iprev = iedge;
+        }
+    }
+    return bbox;
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 TriangleMesh TriangleMesh::convex_hull_3d() const
 {
     // The qhull call:

src/libslic3r/TriangleMesh.hpp

@@ -125,6 +125,10 @@ public:
     BoundingBoxf3 bounding_box() const;
     // Returns the bbox of this TriangleMesh transformed by the given transformation
     BoundingBoxf3 transformed_bounding_box(const Transform3d &trafo) const;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // Variant returning the bbox of the part of this TriangleMesh above the given world_min_z
+    BoundingBoxf3 transformed_bounding_box(const Transform3d& trafo, double world_min_z) const;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     // Return the size of the mesh in coordinates.
     Vec3d size() const { return m_stats.size.cast<double>(); }
     /// Return the center of the related bounding box.

src/slic3r/GUI/3DBed.cpp

@@ -7,11 +7,10 @@
 #include "libslic3r/BoundingBox.hpp"
 #include "libslic3r/Geometry.hpp"
 #include "libslic3r/Tesselate.hpp"
+#include "libslic3r/PresetBundle.hpp"
 
 #include "GUI_App.hpp"
-#include "libslic3r/PresetBundle.hpp"
 #include "GLCanvas3D.hpp"
-#include "3DScene.hpp"
 
 #include <GL/glew.h>
 
@@ -154,7 +153,11 @@ bool Bed3D::set_shape(const Pointfs& shape, const std::string& custom_texture, c
     std::string model;
     std::string texture;
     if (force_as_custom)
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        type = EType::Custom;
+#else
         type = Custom;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     else {
         auto [new_type, system_model, system_texture] = detect_type(shape);
         type = new_type;
@@ -174,7 +177,12 @@ bool Bed3D::set_shape(const Pointfs& shape, const std::string& custom_texture, c
         model_filename.clear();
     }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    EShapeType shape_type = detect_shape_type(shape);
+    if (m_shape == shape && m_type == type && m_shape_type == shape_type && m_texture_filename == texture_filename && m_model_filename == model_filename)
+#else
     if (m_shape == shape && m_type == type && m_texture_filename == texture_filename && m_model_filename == model_filename)
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         // No change, no need to update the UI.
         return false;
 
@@ -182,6 +190,9 @@ bool Bed3D::set_shape(const Pointfs& shape, const std::string& custom_texture, c
     m_texture_filename = texture_filename;
     m_model_filename = model_filename;
     m_type = type;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_shape_type = shape_type;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     calc_bounding_boxes();
 
@@ -229,6 +240,84 @@ void Bed3D::render_for_picking(GLCanvas3D& canvas, bool bottom, float scale_fact
     render_internal(canvas, bottom, scale_factor, false, false, true);
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+bool Bed3D::is_rectangle(const Pointfs& shape, Vec2d* min, Vec2d* max)
+{
+    const Lines lines = Polygon::new_scale(shape).lines();
+    bool ret = lines.size() == 4 && lines[0].parallel_to(lines[2]) && lines[1].parallel_to(lines[3]) && lines[0].perpendicular_to(lines[1]);
+    if (ret) {
+        if (min != nullptr) {
+            *min = shape.front();
+            for (const Vec2d& pt : shape) {
+                min->x() = std::min(min->x(), pt.x());
+                min->y() = std::min(min->y(), pt.y());
+            }
+        }
+        if (max != nullptr) {
+            *max = shape.front();
+            for (const Vec2d& pt : shape) {
+                max->x() = std::max(max->x(), pt.x());
+                max->y() = std::max(max->y(), pt.y());
+            }
+        }
+    }
+    return ret;
+}
+
+bool Bed3D::is_circle(const Pointfs& shape, Vec2d* center, double* radius)
+{
+    if (shape.size() < 3)
+        return false;
+
+    // Analyze the array of points.
+    // Do they reside on a circle ?
+    const Vec2d box_center = BoundingBoxf(shape).center();
+    std::vector<double> vertex_distances;
+    double avg_dist = 0.0;
+    for (const Vec2d& pt : shape) {
+        double distance = (pt - box_center).norm();
+        vertex_distances.push_back(distance);
+        avg_dist += distance;
+    }
+
+    avg_dist /= vertex_distances.size();
+
+    double tolerance = avg_dist * 0.01;
+
+    bool defined_value = true;
+    for (double el : vertex_distances) {
+        if (fabs(el - avg_dist) > tolerance)
+            defined_value = false;
+        break;
+    }
+
+    if (center != nullptr)
+        *center = box_center;
+
+    if (radius != nullptr)
+        *radius = avg_dist;
+
+    return defined_value;
+}
+
+bool Bed3D::is_convex(const Pointfs& shape)
+{
+    return Polygon::new_scale(shape).convex_points().size() == shape.size();
+}
+
+Bed3D::EShapeType Bed3D::detect_shape_type(const Pointfs& shape)
+{
+    if (shape.size() < 3)
+        return EShapeType::Invalid;
+    else if (is_rectangle(shape))
+        return EShapeType::Rectangle;
+    else if (is_circle(shape))
+        return EShapeType::Circle;
+    else
+        return EShapeType::Custom;
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 void Bed3D::render_internal(GLCanvas3D& canvas, bool bottom, float scale_factor,
     bool show_axes, bool show_texture, bool picking)
 {
@@ -244,9 +333,15 @@ void Bed3D::render_internal(GLCanvas3D& canvas, bool bottom, float scale_factor,
 
     switch (m_type)
     {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    case EType::System: { render_system(canvas, bottom, show_texture); break; }
+    default:
+    case EType::Custom: { render_custom(canvas, bottom, show_texture, picking); break; }
+#else
     case System: { render_system(canvas, bottom, show_texture); break; }
     default:
     case Custom: { render_custom(canvas, bottom, show_texture, picking); break; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     }
 
     glsafe(::glDisable(GL_DEPTH_TEST));
@@ -320,7 +415,11 @@ std::tuple<Bed3D::EType, std::string, std::string> Bed3D::detect_type(const Poin
                     std::string model_filename = PresetUtils::system_printer_bed_model(*curr);
                     std::string texture_filename = PresetUtils::system_printer_bed_texture(*curr);
                     if (!model_filename.empty() && !texture_filename.empty())
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+                        return { EType::System, model_filename, texture_filename };
+#else
                         return { System, model_filename, texture_filename };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
                 }
             }
 
@@ -328,7 +427,11 @@ std::tuple<Bed3D::EType, std::string, std::string> Bed3D::detect_type(const Poin
         }
     }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    return { EType::Custom, "", "" };
+#else
     return { Custom, "", "" };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void Bed3D::render_axes() const

src/slic3r/GUI/3DBed.hpp

@@ -62,15 +62,36 @@ class Bed3D
     };
 
 public:
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    enum class EType : unsigned char
+    {
+        System,
+        Custom
+    };
+
+    enum class EShapeType : unsigned char
+    {
+        Rectangle,
+        Circle,
+        Custom,
+        Invalid
+    };
+#else
     enum EType : unsigned char
     {
         System,
         Custom,
         Num_Types
     };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 private:
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    EType m_type{ EType::Custom };
+    EShapeType m_shape_type{ EShapeType::Invalid };
+#else
     EType m_type{ Custom };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     Pointfs m_shape;
     std::string m_texture_filename;
     std::string m_model_filename;
@@ -94,16 +115,18 @@ public:
     ~Bed3D() { reset(); }
 
     EType get_type() const { return m_type; }
-
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    EShapeType get_shape_type() const { return m_shape_type; }
+    bool is_custom() const { return m_type == EType::Custom; }
+#else
     bool is_custom() const { return m_type == Custom; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     const Pointfs& get_shape() const { return m_shape; }
     // Return true if the bed shape changed, so the calee will update the UI.
     bool set_shape(const Pointfs& shape, const std::string& custom_texture, const std::string& custom_model, bool force_as_custom = false);
 
-    const BoundingBoxf3& get_bounding_box(bool extended) const {
+    const BoundingBoxf3& get_bounding_box(bool extended) const { return extended ? m_extended_bounding_box : m_bounding_box; }
-        return extended ? m_extended_bounding_box : m_bounding_box;
-    }
 
     bool contains(const Point& point) const;
     Point point_projection(const Point& point) const;
@@ -113,6 +136,13 @@ public:
 
     void render_for_picking(GLCanvas3D& canvas, bool bottom, float scale_factor);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    static bool is_rectangle(const Pointfs& shape, Vec2d* min = nullptr, Vec2d* max = nullptr);
+    static bool is_circle(const Pointfs& shape, Vec2d* center = nullptr, double* radius = nullptr);
+    static bool is_convex(const Pointfs& shape);
+    static EShapeType detect_shape_type(const Pointfs& shape);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 private:
     void calc_bounding_boxes() const;
     void calc_triangles(const ExPolygon& poly);

src/slic3r/GUI/3DScene.cpp

@@ -10,6 +10,10 @@
 #include "GLShader.hpp"
 #include "GUI_App.hpp"
 #include "Plater.hpp"
+#include "BitmapCache.hpp"
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+#include "3DBed.hpp"
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 #include "libslic3r/ExtrusionEntity.hpp"
 #include "libslic3r/ExtrusionEntityCollection.hpp"
@@ -17,7 +21,6 @@
 #include "libslic3r/Print.hpp"
 #include "libslic3r/SLAPrint.hpp"
 #include "libslic3r/Slicing.hpp"
-#include "slic3r/GUI/BitmapCache.hpp"
 #include "libslic3r/Format/STL.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/AppConfig.hpp"
@@ -37,6 +40,12 @@
 
 #include <Eigen/Dense>
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+#include <libqhullcpp/Qhull.h>
+#include <libqhullcpp/QhullFacetList.h>
+#include <libqhullcpp/QhullVertexSet.h>
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 #ifdef HAS_GLSAFE
 void glAssertRecentCallImpl(const char* file_name, unsigned int line, const char* function_name)
 {
@@ -261,6 +270,12 @@ void GLIndexedVertexArray::render(
     const std::pair<size_t, size_t>& tverts_range,
     const std::pair<size_t, size_t>& qverts_range) const
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // this method has been called before calling finalize() ?
+    if (this->vertices_and_normals_interleaved_VBO_id == 0 && !this->vertices_and_normals_interleaved.empty())
+        return;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
     assert(this->vertices_and_normals_interleaved_VBO_id != 0);
     assert(this->triangle_indices_VBO_id != 0 || this->quad_indices_VBO_id != 0);
 
@@ -319,19 +334,7 @@ void GLVolume::SinkingContours::update()
             MeshSlicingParams slicing_params;
             slicing_params.trafo = m_parent.world_matrix();
             Polygons polygons = union_(slice_mesh(mesh.its, 0.0f, slicing_params));
-            for (Polygon& polygon : polygons) {
+            for (ExPolygon &expoly : diff_ex(expand(polygons, float(scale_(HalfWidth))), shrink(polygons, float(scale_(HalfWidth))))) {
-                if (polygon.is_clockwise())
-                    polygon.reverse();
-                Polygons outer_polys = offset(polygon, float(scale_(HalfWidth)));
-                assert(outer_polys.size() == 1);
-                if (outer_polys.empty())
-                    // no outer contour, skip
-                    continue;
-
-                ExPolygon expoly(std::move(outer_polys.front()));
-                expoly.holes = offset(polygon, -float(scale_(HalfWidth)));
-                polygons_reverse(expoly.holes);
-
                 GUI::GLModel::InitializationData::Entity entity;
                 entity.type = GUI::GLModel::PrimitiveType::Triangles;
                 const std::vector<Vec3d> triangulation = triangulate_expolygon_3d(expoly);
@@ -529,6 +532,23 @@ BoundingBoxf3 GLVolume::transformed_convex_hull_bounding_box(const Transform3d &
         bounding_box().transformed(trafo);
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+BoundingBoxf3 GLVolume::transformed_non_sinking_bounding_box(const Transform3d& trafo) const
+{
+    return GUI::wxGetApp().plater()->model().objects[object_idx()]->volumes[volume_idx()]->mesh().transformed_bounding_box(trafo, 0.0);
+}
+
+const BoundingBoxf3& GLVolume::transformed_non_sinking_bounding_box() const
+{
+    if (!m_transformed_non_sinking_bounding_box.has_value()) {
+        std::optional<BoundingBoxf3>* trans_box = const_cast<std::optional<BoundingBoxf3>*>(&m_transformed_non_sinking_bounding_box);
+        const Transform3d& trafo = world_matrix();
+        *trans_box = transformed_non_sinking_bounding_box(trafo);
+    }
+    return *m_transformed_non_sinking_bounding_box;
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 void GLVolume::set_range(double min_z, double max_z)
 {
     this->qverts_range.first = 0;
@@ -603,6 +623,106 @@ void GLVolume::render_sinking_contours()
     m_sinking_contours.render();
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+void GLVolume::calc_convex_hull_3d()
+{
+    if (this->indexed_vertex_array.vertices_and_normals_interleaved.empty())
+        return;
+
+    TriangleMesh mesh;
+    for (size_t i = 0; i < this->indexed_vertex_array.vertices_and_normals_interleaved.size(); i += 6) {
+        const size_t v_id = 3 + i;
+        mesh.its.vertices.push_back({ this->indexed_vertex_array.vertices_and_normals_interleaved[v_id + 0],
+                                      this->indexed_vertex_array.vertices_and_normals_interleaved[v_id + 1],
+                                      this->indexed_vertex_array.vertices_and_normals_interleaved[v_id + 2]
+            });
+    }
+
+    const std::vector<Vec3f>& vertices = mesh.its.vertices;
+
+    // The qhull call:
+    orgQhull::Qhull qhull;
+    qhull.disableOutputStream(); // we want qhull to be quiet
+    std::vector<realT> src_vertices;
+    try
+    {
+#if REALfloat
+        qhull.runQhull("", 3, (int)vertices.size(), (const realT*)(vertices.front().data()), "Qt");
+#else
+        src_vertices.reserve(vertices.size() * 3);
+        // We will now fill the vector with input points for computation:
+        for (const stl_vertex& v : vertices)
+            for (int i = 0; i < 3; ++i)
+                src_vertices.emplace_back(v(i));
+        qhull.runQhull("", 3, (int)src_vertices.size() / 3, src_vertices.data(), "Qt");
+#endif
+    }
+    catch (...)
+    {
+        std::cout << "GLVolume::calc_convex_hull_3d() - Unable to create convex hull" << std::endl;
+        return ;
+    }
+
+    // Let's collect results:
+    std::vector<Vec3f>  dst_vertices;
+    std::vector<Vec3i>  dst_facets;
+    // Map of QHull's vertex ID to our own vertex ID (pointing to dst_vertices).
+    std::vector<int>    map_dst_vertices;
+#ifndef NDEBUG
+    Vec3f               centroid = Vec3f::Zero();
+    for (const auto& pt : vertices)
+        centroid += pt;
+    centroid /= float(vertices.size());
+#endif // NDEBUG
+    for (const orgQhull::QhullFacet& facet : qhull.facetList()) {
+        // Collect face vertices first, allocate unique vertices in dst_vertices based on QHull's vertex ID.
+        Vec3i  indices;
+        int    cnt = 0;
+        for (const orgQhull::QhullVertex vertex : facet.vertices()) {
+            const int id = vertex.id();
+            assert(id >= 0);
+            if (id >= int(map_dst_vertices.size()))
+                map_dst_vertices.resize(next_highest_power_of_2(size_t(id + 1)), -1);
+            if (int i = map_dst_vertices[id]; i == -1) {
+                // Allocate a new vertex.
+                i = int(dst_vertices.size());
+                map_dst_vertices[id] = i;
+                orgQhull::QhullPoint pt(vertex.point());
+                dst_vertices.emplace_back(pt[0], pt[1], pt[2]);
+                indices[cnt] = i;
+            }
+            else
+                // Reuse existing vertex.
+                indices[cnt] = i;
+
+            if (cnt++ == 3)
+                break;
+        }
+        assert(cnt == 3);
+        if (cnt == 3) {
+            // QHull sorts vertices of a face lexicographically by their IDs, not by face normals.
+            // Calculate face normal based on the order of vertices.
+            const Vec3f n = (dst_vertices[indices(1)] - dst_vertices[indices(0)]).cross(dst_vertices[indices(2)] - dst_vertices[indices(1)]);
+            auto* n2 = facet.getBaseT()->normal;
+            const auto  d = n.x() * n2[0] + n.y() * n2[1] + n.z() * n2[2];
+#ifndef NDEBUG
+            const Vec3f n3 = (dst_vertices[indices(0)] - centroid);
+            const auto  d3 = n.dot(n3);
+            assert((d < 0.f) == (d3 < 0.f));
+#endif // NDEBUG
+            // Get the face normal from QHull.
+            if (d < 0.f)
+                // Fix face orientation.
+                std::swap(indices[1], indices[2]);
+            dst_facets.emplace_back(indices);
+        }
+    }
+
+    TriangleMesh out_mesh{ std::move(dst_vertices), std::move(dst_facets) };
+    this->set_convex_hull(out_mesh);
+}
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 std::vector<int> GLVolumeCollection::load_object(
     const ModelObject       *model_object,
     int                      obj_idx,
@@ -761,6 +881,9 @@ int GLVolumeCollection::load_wipe_tower_preview(
     volumes.emplace_back(new GLVolume(color));
     GLVolume& v = *volumes.back();
     v.indexed_vertex_array.load_mesh(mesh);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    v.set_convex_hull(mesh.convex_hull_3d());
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     v.indexed_vertex_array.finalize_geometry(opengl_initialized);
     v.set_volume_offset(Vec3d(pos_x, pos_y, 0.0));
     v.set_volume_rotation(Vec3d(0., 0., (M_PI / 180.) * rotation_angle));
@@ -867,10 +990,17 @@ void GLVolumeCollection::render(GLVolumeCollection::ERenderType type, bool disab
         shader->set_uniform("uniform_color", volume.first->render_color);
         shader->set_uniform("z_range", m_z_range, 2);
         shader->set_uniform("clipping_plane", m_clipping_plane, 4);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        shader->set_uniform("print_volume.type", static_cast<int>(m_print_volume.type));
+        shader->set_uniform("print_volume.xy_data", m_print_volume.data);
+        shader->set_uniform("print_volume.z_data", m_print_volume.zs);
+        shader->set_uniform("volume_world_matrix", volume.first->world_matrix());
+#else
         shader->set_uniform("print_box.min", m_print_box_min, 3);
         shader->set_uniform("print_box.max", m_print_box_max, 3);
         shader->set_uniform("print_box.actived", volume.first->shader_outside_printer_detection_enabled);
         shader->set_uniform("print_box.volume_world_matrix", volume.first->world_matrix());
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         shader->set_uniform("slope.actived", m_slope.active && !volume.first->is_modifier && !volume.first->is_wipe_tower);
         shader->set_uniform("slope.volume_world_normal_matrix", static_cast<Matrix3f>(volume.first->world_matrix().matrix().block(0, 0, 3, 3).inverse().transpose().cast<float>()));
         shader->set_uniform("slope.normal_z", m_slope.normal_z);
@@ -919,7 +1049,11 @@ void GLVolumeCollection::render(GLVolumeCollection::ERenderType type, bool disab
         glsafe(::glDisable(GL_BLEND));
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, ModelInstanceEPrintVolumeState* out_state, bool as_toolpaths) const
+#else
 bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, ModelInstanceEPrintVolumeState* out_state) const
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 {
     if (config == nullptr)
         return false;
@@ -928,22 +1062,95 @@ bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, M
     if (opt == nullptr)
         return false;
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    const Polygon bed_poly = offset(Polygon::new_scale(opt->values), static_cast<float>(scale_(BedEpsilon))).front();
+    const float bed_height = config->opt_float("max_print_height");
+    const BoundingBox bed_box_2D = get_extents(bed_poly);
+    BoundingBoxf3 print_volume({ unscale<double>(bed_box_2D.min.x()), unscale<double>(bed_box_2D.min.y()), -1e10 },
+                               { unscale<double>(bed_box_2D.max.x()), unscale<double>(bed_box_2D.max.y()), bed_height });
+
+    auto check_against_rectangular_bed = [&print_volume](GLVolume& volume, ModelInstanceEPrintVolumeState& state) {
+        const BoundingBoxf3* const bb = volume.is_sinking() ? &volume.transformed_non_sinking_bounding_box() : &volume.transformed_convex_hull_bounding_box();
+        volume.is_outside = !print_volume.contains(*bb);
+        if (volume.printable) {
+            if (state == ModelInstancePVS_Inside && volume.is_outside)
+                state = ModelInstancePVS_Fully_Outside;
+            if (state == ModelInstancePVS_Fully_Outside && volume.is_outside && print_volume.intersects(*bb))
+                state = ModelInstancePVS_Partly_Outside;
+        }
+    };
+
+    auto check_against_circular_bed = [](GLVolume& volume, ModelInstanceEPrintVolumeState& state, const Vec2d& center, double radius) {
+        const TriangleMesh* mesh = volume.is_sinking() ? &GUI::wxGetApp().plater()->model().objects[volume.object_idx()]->volumes[volume.volume_idx()]->mesh() : volume.convex_hull();
+        const Polygon volume_hull_2d = its_convex_hull_2d_above(mesh->its, volume.world_matrix().cast<float>(), 0.0f);
+        size_t outside_count = 0;
+        const double sq_radius = sqr(radius);
+        for (const Point& p : volume_hull_2d.points) {
+            if (sq_radius < (unscale(p) - center).squaredNorm())
+                ++outside_count;
+        }
+
+        volume.is_outside = outside_count > 0;
+        if (volume.printable) {
+            if (state == ModelInstancePVS_Inside && volume.is_outside)
+                state = ModelInstancePVS_Fully_Outside;
+            if (state == ModelInstancePVS_Fully_Outside && volume.is_outside && outside_count < volume_hull_2d.size())
+                state = ModelInstancePVS_Partly_Outside;
+        }
+    };
+
+    auto check_against_convex_bed = [&bed_poly, bed_height](GLVolume& volume, ModelInstanceEPrintVolumeState& state) {
+        const TriangleMesh* mesh = volume.is_sinking() ? &GUI::wxGetApp().plater()->model().objects[volume.object_idx()]->volumes[volume.volume_idx()]->mesh() : volume.convex_hull();
+        const Polygon volume_hull_2d = its_convex_hull_2d_above(mesh->its, volume.world_matrix().cast<float>(), 0.0f);
+        const BoundingBoxf3* const bb = volume.is_sinking() ? &volume.transformed_non_sinking_bounding_box() : &volume.transformed_convex_hull_bounding_box();
+        ModelInstanceEPrintVolumeState volume_state = printbed_collision_state(bed_poly, bed_height, volume_hull_2d, bb->min.z(), bb->max.z());
+        bool contained = (volume_state == ModelInstancePVS_Inside);
+        bool intersects = (volume_state == ModelInstancePVS_Partly_Outside);
+
+        volume.is_outside = !contained;
+        if (volume.printable) {
+            if (state == ModelInstancePVS_Inside && volume.is_outside)
+                state = ModelInstancePVS_Fully_Outside;
+
+            if (state == ModelInstancePVS_Fully_Outside && volume.is_outside && intersects)
+                state = ModelInstancePVS_Partly_Outside;
+        }
+    };
+#else
     const BoundingBox bed_box_2D = get_extents(Polygon::new_scale(opt->values));
     BoundingBoxf3 print_volume({ unscale<double>(bed_box_2D.min.x()), unscale<double>(bed_box_2D.min.y()), 0.0 },
-                               { unscale<double>(bed_box_2D.max.x()), unscale<double>(bed_box_2D.max.y()),
+        { unscale<double>(bed_box_2D.max.x()), unscale<double>(bed_box_2D.max.y()), config->opt_float("max_print_height") });
-                               config->opt_float("max_print_height") });
     // Allow the objects to protrude below the print bed
-    print_volume.min(2) = -1e10;
+    print_volume.min.z() = -1e10;
-    print_volume.min(0) -= BedEpsilon;
+    print_volume.min.x() -= BedEpsilon;
-    print_volume.min(1) -= BedEpsilon;
+    print_volume.min.y() -= BedEpsilon;
-    print_volume.max(0) += BedEpsilon;
+    print_volume.max.x() += BedEpsilon;
-    print_volume.max(1) += BedEpsilon;
+    print_volume.max.y() += BedEpsilon;
-
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
-    ModelInstanceEPrintVolumeState state = ModelInstancePVS_Inside;
 
+    ModelInstanceEPrintVolumeState overall_state = ModelInstancePVS_Inside;
     bool contained_min_one = false;
 
     for (GLVolume* volume : this->volumes) {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        if (as_toolpaths && !volume->is_extrusion_path)
+            continue;
+        else if (!as_toolpaths && (volume->is_modifier || (!volume->shader_outside_printer_detection_enabled && (volume->is_wipe_tower || volume->composite_id.volume_id < 0))))
+            continue;
+
+        if (GUI::Bed3D::is_rectangle(opt->values))
+            check_against_rectangular_bed(*volume, overall_state);
+        else {
+            Vec2d center;
+            double radius;
+            if (GUI::Bed3D::is_circle(opt->values, &center, &radius))
+                check_against_circular_bed(*volume, overall_state, center, radius);
+            else if (GUI::Bed3D::is_convex(opt->values))
+                check_against_convex_bed(*volume, overall_state);
+        }
+
+        contained_min_one |= !volume->is_outside;
+#else
         if (volume->is_modifier || (!volume->shader_outside_printer_detection_enabled && (volume->is_wipe_tower || volume->composite_id.volume_id < 0)))
             continue;
 
@@ -956,15 +1163,16 @@ bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, M
 
         contained_min_one |= contained;
 
-        if (state == ModelInstancePVS_Inside && volume->is_outside)
+        if (overall_state == ModelInstancePVS_Inside && volume->is_outside)
-            state = ModelInstancePVS_Fully_Outside;
+            overall_state = ModelInstancePVS_Fully_Outside;
 
-        if (state == ModelInstancePVS_Fully_Outside && volume->is_outside && print_volume.intersects(bb))
+        if (overall_state == ModelInstancePVS_Fully_Outside && volume->is_outside && print_volume.intersects(bb))
-            state = ModelInstancePVS_Partly_Outside;
+            overall_state = ModelInstancePVS_Partly_Outside;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     }
 
     if (out_state != nullptr)
-        *out_state = state;
+        *out_state = overall_state;
 
     return contained_min_one;
 }
@@ -1020,35 +1228,28 @@ void GLVolumeCollection::update_colors_by_extruder(const DynamicPrintConfig* con
     std::vector<Color> colors(colors_count);
 
     unsigned char rgb[3];
-    for (unsigned int i = 0; i < colors_count; ++i)
+    for (unsigned int i = 0; i < colors_count; ++i) {
-    {
         const std::string& txt_color = config->opt_string("extruder_colour", i);
         if (Slic3r::GUI::BitmapCache::parse_color(txt_color, rgb))
-        {
             colors[i].set(txt_color, rgb);
-        }
+        else {
-        else
-        {
             const std::string& txt_color = config->opt_string("filament_colour", i);
             if (Slic3r::GUI::BitmapCache::parse_color(txt_color, rgb))
                 colors[i].set(txt_color, rgb);
         }
     }
 
-    for (GLVolume* volume : volumes)
+    for (GLVolume* volume : volumes) {
-    {
+        if (volume == nullptr || volume->is_modifier || volume->is_wipe_tower || (volume->volume_idx() < 0))
-        if ((volume == nullptr) || volume->is_modifier || volume->is_wipe_tower || (volume->volume_idx() < 0))
             continue;
 
         int extruder_id = volume->extruder_id - 1;
-        if ((extruder_id < 0) || ((int)colors.size() <= extruder_id))
+        if (extruder_id < 0 || (int)colors.size() <= extruder_id)
             extruder_id = 0;
 
         const Color& color = colors[extruder_id];
-        if (!color.text.empty())
+        if (!color.text.empty()) {
-        {
+            for (int i = 0; i < 3; ++i) {
-            for (int i = 0; i < 3; ++i)
-            {
                 volume->color[i] = (float)color.rgb[i] * inv_255;
             }
         }

src/slic3r/GUI/3DScene.hpp

@@ -41,7 +41,6 @@ enum ModelInstanceEPrintVolumeState : unsigned char;
 // Return appropriate color based on the ModelVolume.
 std::array<float, 4> color_from_model_volume(const ModelVolume& model_volume);
 
-
 // A container for interleaved arrays of 3D vertices and normals,
 // possibly indexed by triangles and / or quads.
 class GLIndexedVertexArray {
@@ -279,6 +278,10 @@ private:
     std::shared_ptr<const TriangleMesh> m_convex_hull;
     // Bounding box of this volume, in unscaled coordinates.
     std::optional<BoundingBoxf3> m_transformed_convex_hull_bounding_box;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // Bounding box of the non sinking part of this volume, in unscaled coordinates.
+    std::optional<BoundingBoxf3> m_transformed_non_sinking_bounding_box;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     class SinkingContours
     {
@@ -469,6 +472,12 @@ public:
     BoundingBoxf3        transformed_convex_hull_bounding_box(const Transform3d &trafo) const;
     // caching variant
     const BoundingBoxf3& transformed_convex_hull_bounding_box() const;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // non-caching variant
+    BoundingBoxf3        transformed_non_sinking_bounding_box(const Transform3d& trafo) const;
+    // caching variant
+    const BoundingBoxf3& transformed_non_sinking_bounding_box() const;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     // convex hull
     const TriangleMesh*  convex_hull() const { return m_convex_hull.get(); }
 
@@ -481,7 +490,15 @@ public:
     void                finalize_geometry(bool opengl_initialized) { this->indexed_vertex_array.finalize_geometry(opengl_initialized); }
     void                release_geometry() { this->indexed_vertex_array.release_geometry(); }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    void                set_bounding_boxes_as_dirty() {
+        m_transformed_bounding_box.reset();
+        m_transformed_convex_hull_bounding_box.reset();
+        m_transformed_non_sinking_bounding_box.reset();
+    }
+#else
     void                set_bounding_boxes_as_dirty() { m_transformed_bounding_box.reset(); m_transformed_convex_hull_bounding_box.reset(); }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     bool                is_sla_support() const;
     bool                is_sla_pad() const;
@@ -498,6 +515,12 @@ public:
     // Return an estimate of the memory held by GPU vertex buffers.
     size_t 				gpu_memory_used() const { return this->indexed_vertex_array.gpu_memory_used(); }
     size_t 				total_memory_used() const { return this->cpu_memory_used() + this->gpu_memory_used(); }
+
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // calculates the 3D convex hull from indexed_vertex_array.vertices_and_normals_interleaved
+    // must be called before calling indexed_vertex_array.finalize_geometry();
+    void calc_convex_hull_3d();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 };
 
 typedef std::vector<GLVolume*> GLVolumePtrs;
@@ -514,10 +537,30 @@ public:
         All
     };
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    struct PrintVolume
+    {
+        // see: Bed3D::EShapeType
+        int type{ 0 };
+        // data contains:
+        // Rectangle:
+        //   [0] = min.x, [1] = min.y, [2] = max.x, [3] = max.y
+        // Circle:
+        //   [0] = center.x, [1] = center.y, [3] = radius
+        std::array<float, 4> data;
+        //   [0] = min z, [1] = max z
+        std::array<float, 2> zs;
+    };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 private:
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    PrintVolume m_print_volume;
+#else
     // min and max vertex of the print box volume
     float m_print_box_min[3];
     float m_print_box_max[3];
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     // z range for clipping in shaders
     float m_z_range[2];
@@ -589,10 +632,14 @@ public:
     bool empty() const { return volumes.empty(); }
     void set_range(double low, double high) { for (GLVolume *vol : this->volumes) vol->set_range(low, high); }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    void set_print_volume(const PrintVolume& print_volume) { m_print_volume = print_volume; }
+#else
     void set_print_box(float min_x, float min_y, float min_z, float max_x, float max_y, float max_z) {
         m_print_box_min[0] = min_x; m_print_box_min[1] = min_y; m_print_box_min[2] = min_z;
         m_print_box_max[0] = max_x; m_print_box_max[1] = max_y; m_print_box_max[2] = max_z;
     }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     void set_z_range(float min_z, float max_z) { m_z_range[0] = min_z; m_z_range[1] = max_z; }
     void set_clipping_plane(const double* coeffs) { m_clipping_plane[0] = coeffs[0]; m_clipping_plane[1] = coeffs[1]; m_clipping_plane[2] = coeffs[2]; m_clipping_plane[3] = coeffs[3]; }
@@ -607,7 +654,11 @@ public:
 
     // returns true if all the volumes are completely contained in the print volume
     // returns the containment state in the given out_state, if non-null
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool check_outside_state(const DynamicPrintConfig* config, ModelInstanceEPrintVolumeState* out_state, bool as_toolpaths = false) const;
+#else
     bool check_outside_state(const DynamicPrintConfig* config, ModelInstanceEPrintVolumeState* out_state) const;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     void reset_outside_state();
 
     void update_colors_by_extruder(const DynamicPrintConfig* config);

src/slic3r/GUI/BedShapeDialog.cpp

@@ -22,9 +22,25 @@ namespace GUI {
 
 BedShape::BedShape(const ConfigOptionPoints& points)
 {
-    auto polygon = Polygon::new_scale(points.values);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    if (points.size() < 3) {
+        m_type = Bed3D::EShapeType::Invalid;
+        return;
+    }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     // is this a rectangle ?
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    Vec2d min;
+    Vec2d max;
+    if (Bed3D::is_rectangle(points.values, &min, &max)) {
+        m_type       = Bed3D::EShapeType::Rectangle;
+        m_rectSize   = max - min;
+        m_rectOrigin = -min;
+        return;
+    }
+#else
+    Polygon polygon = Polygon::new_scale(points.values);
     if (points.size() == 4) {
         auto lines = polygon.lines();
         if (lines[0].parallel_to(lines[2]) && lines[1].parallel_to(lines[3])) {
@@ -48,8 +64,21 @@ BedShape::BedShape(const ConfigOptionPoints& points)
             return;
         }
     }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     // is this a circle ?
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    Vec2d center;
+    double radius;
+    if (Bed3D::is_circle(points.values, &center, &radius)) {
+        m_type     = Bed3D::EShapeType::Circle;
+        m_diameter = 2.0 * radius;
+        return;
+    }
+
+    // This is a custom bed shape, use the polygon provided.
+    m_type = Bed3D::EShapeType::Custom;
+#else
     {
         // Analyze the array of points.Do they reside on a circle ?
         auto center = polygon.bounding_box().center();
@@ -84,6 +113,7 @@ BedShape::BedShape(const ConfigOptionPoints& points)
 
     // This is a custom bed shape, use the polygon provided.
     m_type = Type::Custom;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 static std::string get_option_label(BedShape::Parameter param)
@@ -134,31 +164,56 @@ void BedShape::append_option_line(ConfigOptionsGroupShp optgroup, Parameter para
     }
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+wxString BedShape::get_name(Bed3D::EShapeType type)
+{
+    switch (type) {
+    case Bed3D::EShapeType::Rectangle: { return _L("Rectangular"); }
+    case Bed3D::EShapeType::Circle:    { return _L("Circular"); }
+    case Bed3D::EShapeType::Custom:    { return _L("Custom"); }
+    case Bed3D::EShapeType::Invalid:
+    default: return _L("Invalid");
+    }
+}
+#else
 wxString BedShape::get_name(Type type)
 {
     switch (type) {
-        case Type::Rectangular  : return _L("Rectangular");
+    case Type::Rectangular: return _L("Rectangular");
-        case Type::Circular     : return _L("Circular");
+    case Type::Circular: return _L("Circular");
-        case Type::Custom       : return _L("Custom");
+    case Type::Custom: return _L("Custom");
-        case Type::Invalid      : 
+    case Type::Invalid:
-        default                 : return _L("Invalid");
+    default: return _L("Invalid");
     }
 }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 size_t BedShape::get_type()
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    return static_cast<size_t>(m_type == Bed3D::EShapeType::Invalid ? Bed3D::EShapeType::Rectangle : m_type);
+#else
     return static_cast<size_t>(m_type == Type::Invalid ? Type::Rectangular : m_type);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 wxString BedShape::get_full_name_with_params()
 {
     wxString out = _L("Shape") + ": " + get_name(m_type);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    if (m_type == Bed3D::EShapeType::Rectangle) {
+#else
     if (m_type == Type::Rectangular) {
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         out += "\n" + _(get_option_label(Parameter::RectSize))  + ": [" + ConfigOptionPoint(m_rectSize).serialize()     + "]";
         out += "\n" + _(get_option_label(Parameter::RectOrigin))+ ": [" + ConfigOptionPoint(m_rectOrigin).serialize()   + "]";
     }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    else if (m_type == Bed3D::EShapeType::Circle)
+#else
     else if (m_type == Type::Circular)
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         out += "\n" + _L(get_option_label(Parameter::Diameter)) + ": [" + double_to_string(m_diameter)                  + "]";
 
     return out;
@@ -166,11 +221,19 @@ wxString BedShape::get_full_name_with_params()
 
 void BedShape::apply_optgroup_values(ConfigOptionsGroupShp optgroup)
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    if (m_type == Bed3D::EShapeType::Rectangle || m_type == Bed3D::EShapeType::Invalid) {
+#else
     if (m_type == Type::Rectangular || m_type == Type::Invalid) {
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         optgroup->set_value("rect_size"     , new ConfigOptionPoints{ m_rectSize    });
         optgroup->set_value("rect_origin"   , new ConfigOptionPoints{ m_rectOrigin  });
     }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    else if (m_type == Bed3D::EShapeType::Circle)
+#else
     else if (m_type == Type::Circular)
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         optgroup->set_value("diameter", double_to_string(m_diameter));
 }
 
@@ -222,7 +285,7 @@ void BedShapePanel::build_panel(const ConfigOptionPoints& default_pt, const Conf
     m_custom_texture = custom_texture.value.empty() ? NONE : custom_texture.value;
     m_custom_model = custom_model.value.empty() ? NONE : custom_model.value;
 
-    auto sbsizer = new wxStaticBoxSizer(wxVERTICAL, this, _(L("Shape")));
+    auto sbsizer = new wxStaticBoxSizer(wxVERTICAL, this, _L("Shape"));
     sbsizer->GetStaticBox()->SetFont(wxGetApp().bold_font());
     wxGetApp().UpdateDarkUI(sbsizer->GetStaticBox());
 
@@ -232,16 +295,28 @@ void BedShapePanel::build_panel(const ConfigOptionPoints& default_pt, const Conf
 
     sbsizer->Add(m_shape_options_book);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    auto optgroup = init_shape_options_page(BedShape::get_name(Bed3D::EShapeType::Rectangle));
+#else
     auto optgroup = init_shape_options_page(BedShape::get_name(BedShape::Type::Rectangular));
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     BedShape::append_option_line(optgroup, BedShape::Parameter::RectSize);
     BedShape::append_option_line(optgroup, BedShape::Parameter::RectOrigin);
     activate_options_page(optgroup);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    optgroup = init_shape_options_page(BedShape::get_name(Bed3D::EShapeType::Circle));
+#else
     optgroup = init_shape_options_page(BedShape::get_name(BedShape::Type::Circular));
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     BedShape::append_option_line(optgroup, BedShape::Parameter::Diameter);
     activate_options_page(optgroup);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    optgroup = init_shape_options_page(BedShape::get_name(Bed3D::EShapeType::Custom));
+#else
     optgroup = init_shape_options_page(BedShape::get_name(BedShape::Type::Custom));
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 	Line line{ "", "" };
 	line.full_width = 1;
@@ -265,10 +340,7 @@ void BedShapePanel::build_panel(const ConfigOptionPoints& default_pt, const Conf
     wxPanel* texture_panel = init_texture_panel();
     wxPanel* model_panel = init_model_panel();
 
-    Bind(wxEVT_CHOICEBOOK_PAGE_CHANGED, ([this](wxCommandEvent& e)
+    Bind(wxEVT_CHOICEBOOK_PAGE_CHANGED, ([this](wxCommandEvent& e) { update_shape(); }));
-    {
-		update_shape();
-	}));
 
 	// right pane with preview canvas
 	m_canvas = new Bed_2D(this);
@@ -295,7 +367,7 @@ void BedShapePanel::build_panel(const ConfigOptionPoints& default_pt, const Conf
 ConfigOptionsGroupShp BedShapePanel::init_shape_options_page(const wxString& title)
 {
     wxPanel* panel = new wxPanel(m_shape_options_book);
-    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _(L("Settings")));
+    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _L("Settings"));
 
     optgroup->label_width = 10;
     optgroup->m_on_change = [this](t_config_option_key opt_key, boost::any value) {
@@ -319,7 +391,7 @@ wxPanel* BedShapePanel::init_texture_panel()
 {
     wxPanel* panel = new wxPanel(this);
     wxGetApp().UpdateDarkUI(panel, true);
-    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _(L("Texture")));
+    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _L("Texture"));
 
     optgroup->label_width = 10;
     optgroup->m_on_change = [this](t_config_option_key opt_key, boost::any value) {
@@ -329,7 +401,7 @@ wxPanel* BedShapePanel::init_texture_panel()
     Line line{ "", "" };
     line.full_width = 1;
     line.widget = [this](wxWindow* parent) {
-        wxButton* load_btn = new wxButton(parent, wxID_ANY, _(L("Load...")));
+        wxButton* load_btn = new wxButton(parent, wxID_ANY, _L("Load..."));
         wxSizer* load_sizer = new wxBoxSizer(wxHORIZONTAL);
         load_sizer->Add(load_btn, 1, wxEXPAND);
 
@@ -338,7 +410,7 @@ wxPanel* BedShapePanel::init_texture_panel()
         wxSizer* filename_sizer = new wxBoxSizer(wxHORIZONTAL);
         filename_sizer->Add(filename_lbl, 1, wxEXPAND);
 
-        wxButton* remove_btn = new wxButton(parent, wxID_ANY, _(L("Remove")));
+        wxButton* remove_btn = new wxButton(parent, wxID_ANY, _L("Remove"));
         wxSizer* remove_sizer = new wxBoxSizer(wxHORIZONTAL);
         remove_sizer->Add(remove_btn, 1, wxEXPAND);
 
@@ -347,31 +419,23 @@ wxPanel* BedShapePanel::init_texture_panel()
         sizer->Add(load_sizer, 1, wxEXPAND);
         sizer->Add(remove_sizer, 1, wxEXPAND | wxTOP, 2);
 
-        load_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e)
+        load_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e) { load_texture(); }));
-            {
+        remove_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e) {
-                load_texture();
-            }));
-
-        remove_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e)
-            {
                 m_custom_texture = NONE;
                 update_shape();
             }));
 
-        filename_lbl->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e)
+        filename_lbl->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) {
-            {
                 e.SetText(_(boost::filesystem::path(m_custom_texture).filename().string()));
                 wxStaticText* lbl = dynamic_cast<wxStaticText*>(e.GetEventObject());
-                if (lbl != nullptr)
+                if (lbl != nullptr) {
-                {
                     bool exists = (m_custom_texture == NONE) || boost::filesystem::exists(m_custom_texture);
                     lbl->SetForegroundColour(exists ? /*wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOWTEXT)*/wxGetApp().get_label_clr_default() : wxColor(*wxRED));
 
                     wxString tooltip_text = "";
-                    if (m_custom_texture != NONE)
+                    if (m_custom_texture != NONE) {
-                    {
                         if (!exists)
-                            tooltip_text += _(L("Not found:")) + " ";
+                            tooltip_text += _L("Not found:") + " ";
 
                         tooltip_text += _(m_custom_texture);
                     }
@@ -382,10 +446,7 @@ wxPanel* BedShapePanel::init_texture_panel()
                 }
             }));
 
-        remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e)
+        remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) { e.Enable(m_custom_texture != NONE); }));
-            {
-                e.Enable(m_custom_texture != NONE);
-            }));
 
         return sizer;
     };
@@ -401,7 +462,7 @@ wxPanel* BedShapePanel::init_model_panel()
 {
     wxPanel* panel = new wxPanel(this);
     wxGetApp().UpdateDarkUI(panel, true);
-    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _(L("Model")));
+    ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(panel, _L("Model"));
 
     optgroup->label_width = 10;
     optgroup->m_on_change = [this](t_config_option_key opt_key, boost::any value) {
@@ -411,7 +472,7 @@ wxPanel* BedShapePanel::init_model_panel()
     Line line{ "", "" };
     line.full_width = 1;
     line.widget = [this](wxWindow* parent) {
-        wxButton* load_btn = new wxButton(parent, wxID_ANY, _(L("Load...")));
+        wxButton* load_btn = new wxButton(parent, wxID_ANY, _L("Load..."));
         wxSizer* load_sizer = new wxBoxSizer(wxHORIZONTAL);
         load_sizer->Add(load_btn, 1, wxEXPAND);
 
@@ -419,7 +480,7 @@ wxPanel* BedShapePanel::init_model_panel()
         wxSizer* filename_sizer = new wxBoxSizer(wxHORIZONTAL);
         filename_sizer->Add(filename_lbl, 1, wxEXPAND);
 
-        wxButton* remove_btn = new wxButton(parent, wxID_ANY, _(L("Remove")));
+        wxButton* remove_btn = new wxButton(parent, wxID_ANY, _L("Remove"));
         wxSizer* remove_sizer = new wxBoxSizer(wxHORIZONTAL);
         remove_sizer->Add(remove_btn, 1, wxEXPAND);
 
@@ -428,31 +489,24 @@ wxPanel* BedShapePanel::init_model_panel()
         sizer->Add(load_sizer, 1, wxEXPAND);
         sizer->Add(remove_sizer, 1, wxEXPAND | wxTOP, 2);
 
-        load_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e)
+        load_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e) { load_model(); }));
-            {
-                load_model();
-            }));
 
-        remove_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e)
+        remove_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent& e) {
-            {
                 m_custom_model = NONE;
                 update_shape();
             }));
 
-        filename_lbl->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e)
+        filename_lbl->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) {
-            {
                 e.SetText(_(boost::filesystem::path(m_custom_model).filename().string()));
                 wxStaticText* lbl = dynamic_cast<wxStaticText*>(e.GetEventObject());
-                if (lbl != nullptr)
+                if (lbl != nullptr) {
-                {
                     bool exists = (m_custom_model == NONE) || boost::filesystem::exists(m_custom_model);
                     lbl->SetForegroundColour(exists ? /*wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOWTEXT)*/wxGetApp().get_label_clr_default() : wxColor(*wxRED));
 
                     wxString tooltip_text = "";
-                    if (m_custom_model != NONE)
+                    if (m_custom_model != NONE) {
-                    {
                         if (!exists)
-                            tooltip_text += _(L("Not found:")) + " ";
+                            tooltip_text += _L("Not found:") + " ";
 
                         tooltip_text += _(m_custom_model);
                     }
@@ -463,10 +517,7 @@ wxPanel* BedShapePanel::init_model_panel()
                 }
             }));
 
-        remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e)
+        remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) { e.Enable(m_custom_model != NONE); }));
-            {
-                e.Enable(m_custom_model != NONE);
-            }));
 
         return sizer;
     };
@@ -511,10 +562,18 @@ void BedShapePanel::update_shape()
 	auto page_idx = m_shape_options_book->GetSelection();
     auto opt_group = m_optgroups[page_idx];
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    Bed3D::EShapeType page_type = static_cast<Bed3D::EShapeType>(page_idx);
+#else
     BedShape::Type page_type = static_cast<BedShape::Type>(page_idx);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
-	if (page_type == BedShape::Type::Rectangular) {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
-		Vec2d rect_size(Vec2d::Zero());
+    if (page_type == Bed3D::EShapeType::Rectangle) {
+#else
+    if (page_type == BedShape::Type::Rectangular) {
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        Vec2d rect_size(Vec2d::Zero());
 		Vec2d rect_origin(Vec2d::Zero());
 
 		try { rect_size = boost::any_cast<Vec2d>(opt_group->get_value("rect_size")); }
@@ -544,8 +603,12 @@ void BedShapePanel::update_shape()
                     Vec2d(x1, y1),
                     Vec2d(x0, y1) };
     }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    else if (page_type == Bed3D::EShapeType::Circle) {
+#else
     else if (page_type == BedShape::Type::Circular) {
-		double diameter;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        double diameter;
 		try { diameter = boost::any_cast<double>(opt_group->get_value("diameter")); }
 		catch (const std::exception & /* e */) { return; } 
 
@@ -560,7 +623,11 @@ void BedShapePanel::update_shape()
 		}
         m_shape = points;
     }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    else if (page_type == Bed3D::EShapeType::Custom)
+#else
     else if (page_type == BedShape::Type::Custom)
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         m_shape = m_loaded_shape;
 
     update_preview();
@@ -569,14 +636,13 @@ void BedShapePanel::update_shape()
 // Loads an stl file, projects it to the XY plane and calculates a polygon.
 void BedShapePanel::load_stl()
 {
-    wxFileDialog dialog(this, _(L("Choose an STL file to import bed shape from:")), "", "", file_wildcards(FT_STL), wxFD_OPEN | wxFD_FILE_MUST_EXIST);
+    wxFileDialog dialog(this, _L("Choose an STL file to import bed shape from:"), "", "", file_wildcards(FT_STL), wxFD_OPEN | wxFD_FILE_MUST_EXIST);
     if (dialog.ShowModal() != wxID_OK)
         return;
 
     std::string file_name = dialog.GetPath().ToUTF8().data();
-    if (!boost::algorithm::iends_with(file_name, ".stl"))
+    if (!boost::algorithm::iends_with(file_name, ".stl")) {
-    {
+        show_error(this, _L("Invalid file format."));
-        show_error(this, _(L("Invalid file format.")));
         return;
     }
 
@@ -587,7 +653,7 @@ void BedShapePanel::load_stl()
         model = Model::read_from_file(file_name);
 	}
 	catch (std::exception &) {
-        show_error(this, _(L("Error! Invalid model")));
+        show_error(this, _L("Error! Invalid model"));
         return;
     }
 
@@ -595,11 +661,11 @@ void BedShapePanel::load_stl()
 	auto expolygons = mesh.horizontal_projection();
 
 	if (expolygons.size() == 0) {
-		show_error(this, _(L("The selected file contains no geometry.")));
+		show_error(this, _L("The selected file contains no geometry."));
 		return;
 	}
 	if (expolygons.size() > 1) {
-		show_error(this, _(L("The selected file contains several disjoint areas. This is not supported.")));
+		show_error(this, _L("The selected file contains several disjoint areas. This is not supported."));
 		return;
 	}
 
@@ -614,7 +680,7 @@ void BedShapePanel::load_stl()
 
 void BedShapePanel::load_texture()
 {
-    wxFileDialog dialog(this, _(L("Choose a file to import bed texture from (PNG/SVG):")), "", "",
+    wxFileDialog dialog(this, _L("Choose a file to import bed texture from (PNG/SVG):"), "", "",
         file_wildcards(FT_TEX), wxFD_OPEN | wxFD_FILE_MUST_EXIST);
 
     if (dialog.ShowModal() != wxID_OK)
@@ -623,9 +689,8 @@ void BedShapePanel::load_texture()
     m_custom_texture = NONE;
 
     std::string file_name = dialog.GetPath().ToUTF8().data();
-    if (!boost::algorithm::iends_with(file_name, ".png") && !boost::algorithm::iends_with(file_name, ".svg"))
+    if (!boost::algorithm::iends_with(file_name, ".png") && !boost::algorithm::iends_with(file_name, ".svg")) {
-    {
+        show_error(this, _L("Invalid file format."));
-        show_error(this, _(L("Invalid file format.")));
         return;
     }
 
@@ -637,7 +702,7 @@ void BedShapePanel::load_texture()
 
 void BedShapePanel::load_model()
 {
-    wxFileDialog dialog(this, _(L("Choose an STL file to import bed model from:")), "", "",
+    wxFileDialog dialog(this, _L("Choose an STL file to import bed model from:"), "", "",
         file_wildcards(FT_STL), wxFD_OPEN | wxFD_FILE_MUST_EXIST);
 
     if (dialog.ShowModal() != wxID_OK)
@@ -646,9 +711,8 @@ void BedShapePanel::load_model()
     m_custom_model = NONE;
 
     std::string file_name = dialog.GetPath().ToUTF8().data();
-    if (!boost::algorithm::iends_with(file_name, ".stl"))
+    if (!boost::algorithm::iends_with(file_name, ".stl")) {
-    {
+        show_error(this, _L("Invalid file format."));
-        show_error(this, _(L("Invalid file format.")));
         return;
     }
 

src/slic3r/GUI/BedShapeDialog.hpp

@@ -5,6 +5,9 @@
 
 #include "GUI_Utils.hpp"
 #include "2DBed.hpp"
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+#include "3DBed.hpp"
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 #include "I18N.hpp"
 
 #include <wx/dialog.h>
@@ -19,12 +22,14 @@ using ConfigOptionsGroupShp = std::shared_ptr<ConfigOptionsGroup>;
 
 struct BedShape
 {
+#if !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     enum class Type {
         Rectangular = 0,
         Circular,
         Custom,
         Invalid
     };
+#endif // !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     enum class Parameter {
         RectSize,
@@ -34,10 +39,18 @@ struct BedShape
 
     BedShape(const ConfigOptionPoints& points);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool            is_custom() { return m_type == Bed3D::EShapeType::Custom; }
+#else
     bool            is_custom() { return m_type == Type::Custom; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     static void     append_option_line(ConfigOptionsGroupShp optgroup, Parameter param);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    static wxString get_name(Bed3D::EShapeType type);
+#else
     static wxString get_name(Type type);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     // convert Type to size_t
     size_t          get_type();
@@ -46,7 +59,11 @@ struct BedShape
     void            apply_optgroup_values(ConfigOptionsGroupShp optgroup);
 
 private:
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    Bed3D::EShapeType m_type{ Bed3D::EShapeType::Invalid };
+#else
     Type    m_type          {Type::Invalid};
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     Vec2d   m_rectSize      {200, 200};
     Vec2d   m_rectOrigin    {0, 0};
     double  m_diameter      {0};

src/slic3r/GUI/GCodeViewer.cpp

@@ -6,10 +6,11 @@
 #include "libslic3r/Model.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/LocalesUtils.hpp"
+#include "libslic3r/PresetBundle.hpp"
+
 #include "GUI_App.hpp"
 #include "MainFrame.hpp"
 #include "Plater.hpp"
-#include "libslic3r/PresetBundle.hpp"
 #include "Camera.hpp"
 #include "I18N.hpp"
 #include "GUI_Utils.hpp"
@@ -19,6 +20,10 @@
 #include "GLToolbar.hpp"
 #include "GUI_Preview.hpp"
 #include "GUI_ObjectManipulation.hpp"
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+#include "3DBed.hpp"
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 #include <imgui/imgui_internal.h>
 
 #include <GL/glew.h>
@@ -674,6 +679,10 @@ void GCodeViewer::load(const GCodeProcessor::Result& gcode_result, const Print&
     if (wxGetApp().is_gcode_viewer())
         m_custom_gcode_per_print_z = gcode_result.custom_gcode_per_print_z;
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_max_print_height = gcode_result.max_print_height;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
     load_toolpaths(gcode_result);
 
     if (m_layers.empty())
@@ -819,6 +828,9 @@ void GCodeViewer::reset()
 
     m_paths_bounding_box = BoundingBoxf3();
     m_max_bounding_box = BoundingBoxf3();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_max_print_height = 0.0f;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     m_tool_colors = std::vector<Color>();
     m_extruders_count = 0;
     m_extruder_ids = std::vector<unsigned char>();
@@ -835,6 +847,9 @@ void GCodeViewer::reset()
 #if ENABLE_GCODE_VIEWER_STATISTICS
     m_statistics.reset_all();
 #endif // ENABLE_GCODE_VIEWER_STATISTICS
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_contained_in_bed = true;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void GCodeViewer::render()
@@ -1554,7 +1569,49 @@ void GCodeViewer::load_toolpaths(const GCodeProcessor::Result& gcode_result)
 
     // set approximate max bounding box (take in account also the tool marker)
     m_max_bounding_box = m_paths_bounding_box;
-    m_max_bounding_box.merge(m_paths_bounding_box.max + m_sequential_view.marker.get_bounding_box().size()[2] * Vec3d::UnitZ());
+    m_max_bounding_box.merge(m_paths_bounding_box.max + m_sequential_view.marker.get_bounding_box().size().z() * Vec3d::UnitZ());
+
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    if (wxGetApp().is_editor()) {
+        const Bed3D::EShapeType bed_type = wxGetApp().plater()->get_bed().get_shape_type();
+        if (bed_type == Bed3D::EShapeType::Rectangle) {
+            BoundingBoxf3 print_volume = wxGetApp().plater()->get_bed().get_bounding_box(false);
+            print_volume.min.z() = -1e10;
+            print_volume.max.z() = m_max_print_height;
+            print_volume.min -= Vec3f(BedEpsilon, BedEpsilon, 0.0f).cast<double>();
+            print_volume.max += Vec3f(BedEpsilon, BedEpsilon, 0.0f).cast<double>();
+            m_contained_in_bed = print_volume.contains(m_paths_bounding_box);
+        }
+        else if (bed_type == Bed3D::EShapeType::Circle) {
+            Vec2d center;
+            double radius;
+            Bed3D::is_circle(wxGetApp().plater()->get_bed().get_shape(), &center, &radius);
+            const double sq_radius = sqr(radius);
+            for (const GCodeProcessor::MoveVertex& move : gcode_result.moves) {
+                if (move.type == EMoveType::Extrude && move.extrusion_role != erCustom && move.width != 0.0f && move.height != 0.0f) {
+                    if (sq_radius < (Vec2d(move.position.x(), move.position.y()) - center).squaredNorm()) {
+                        m_contained_in_bed = false;
+                        break;
+                    }
+                }
+            }
+        }
+        else if (bed_type == Bed3D::EShapeType::Custom) {
+            const Pointfs& shape = wxGetApp().plater()->get_bed().get_shape();
+            if (Bed3D::is_convex(shape)) {
+                const Polygon poly = Polygon::new_scale(shape);
+                for (const GCodeProcessor::MoveVertex& move : gcode_result.moves) {
+                    if (move.type == EMoveType::Extrude && move.extrusion_role != erCustom && move.width != 0.0f && move.height != 0.0f) {
+                        if (!poly.contains(Point::new_scale(Vec2d(move.position.x(), move.position.y())))) {
+                            m_contained_in_bed = false;
+                            break;
+                        }
+                    }
+                }
+            }
+        }
+    }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 #if ENABLE_FIX_SEAMS_SYNCH
     m_sequential_view.gcode_ids.clear();

src/slic3r/GUI/GCodeViewer.hpp

@@ -780,6 +780,9 @@ private:
     BoundingBoxf3 m_paths_bounding_box;
     // bounding box of toolpaths + marker tools
     BoundingBoxf3 m_max_bounding_box;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    float m_max_print_height{ 0.0f };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     std::vector<Color> m_tool_colors;
     Layers m_layers;
     std::array<unsigned int, 2> m_layers_z_range;
@@ -804,6 +807,10 @@ private:
 
     std::vector<CustomGCode::Item> m_custom_gcode_per_print_z;
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool m_contained_in_bed{ true };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 public:
     GCodeViewer();
     ~GCodeViewer() { reset(); }
@@ -832,6 +839,10 @@ public:
     const SequentialView& get_sequential_view() const { return m_sequential_view; }
     void update_sequential_view_current(unsigned int first, unsigned int last);
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool is_contained_in_bed() const { return m_contained_in_bed; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
     EViewType get_view_type() const { return m_view_type; }
     void set_view_type(EViewType type) {
         if (type == EViewType::Count)

src/slic3r/GUI/GLCanvas3D.cpp

@@ -1108,10 +1108,18 @@ void GLCanvas3D::reset_volumes()
     _set_warning_notification(EWarning::ObjectOutside, false);
 }
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+ModelInstanceEPrintVolumeState GLCanvas3D::check_volumes_outside_state(bool as_toolpaths) const
+#else
 ModelInstanceEPrintVolumeState GLCanvas3D::check_volumes_outside_state() const
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 {
     ModelInstanceEPrintVolumeState state;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_volumes.check_outside_state(m_config, &state, as_toolpaths);
+#else
     m_volumes.check_outside_state(m_config, &state);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     return state;
 }
 
@@ -1828,8 +1836,7 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re
                 assert(volume_idx_wipe_tower_old == -1);
                 volume_idx_wipe_tower_old = (int)volume_id;
             }
-            if (!m_reload_delayed)
+            if (!m_reload_delayed) {
-            {
                 deleted_volumes.emplace_back(volume, volume_id);
                 delete volume;
             }
@@ -2123,8 +2130,10 @@ void GLCanvas3D::load_sla_preview()
 	    // Release OpenGL data before generating new data.
 	    reset_volumes();
         _load_sla_shells();
+#if !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         const BoundingBoxf3& bed_bb = wxGetApp().plater()->get_bed().get_bounding_box(false);
         m_volumes.set_print_box(float(bed_bb.min.x()) - BedEpsilon, float(bed_bb.min.y()) - BedEpsilon, 0.0f, float(bed_bb.max.x()) + BedEpsilon, float(bed_bb.max.y()) + BedEpsilon, (float)m_config->opt_float("max_print_height"));
+#endif // !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         _update_sla_shells_outside_state();
         _set_warning_notification_if_needed(EWarning::SlaSupportsOutside);
     }
@@ -3216,6 +3225,11 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt)
         }
     }
     else if (evt.LeftUp() || evt.MiddleUp() || evt.RightUp()) {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        if (evt.LeftUp())
+            m_selection.stop_dragging();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
         if (m_layers_editing.state != LayersEditing::Unknown) {
             m_layers_editing.state = LayersEditing::Unknown;
             _stop_timer();
@@ -4984,6 +4998,7 @@ void GLCanvas3D::_rectangular_selection_picking_pass()
     _update_volumes_hover_state();
 }
 
+#if !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 static BoundingBoxf3 print_volume(const DynamicPrintConfig& config)
 {
     // tolerance to avoid false detection at bed edges
@@ -5000,6 +5015,7 @@ static BoundingBoxf3 print_volume(const DynamicPrintConfig& config)
     }
     return ret;
 }
+#endif // !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 void GLCanvas3D::_render_background() const
 {
@@ -5010,11 +5026,16 @@ void GLCanvas3D::_render_background() const
 
         if (!m_volumes.empty())
             use_error_color &= _is_any_volume_outside();
-        else {
+        else
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+            use_error_color &= m_gcode_viewer.has_data() && !m_gcode_viewer.is_contained_in_bed();
+#else
+        {
             const BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
             const BoundingBoxf3& paths_volume = m_gcode_viewer.get_paths_bounding_box();
             use_error_color &= (test_volume.radius() > 0.0 && paths_volume.radius() > 0.0) ? !test_volume.contains(paths_volume) : false;
         }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     }
 
     glsafe(::glPushMatrix());
@@ -5090,13 +5111,55 @@ void GLCanvas3D::_render_objects(GLVolumeCollection::ERenderType type)
     if (m_picking_enabled) {
         // Update the layer editing selection to the first object selected, update the current object maximum Z.
         m_layers_editing.select_object(*m_model, this->is_layers_editing_enabled() ? m_selection.get_object_idx() : -1);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
         if (m_config != nullptr) {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+            Bed3D::EShapeType type = wxGetApp().plater()->get_bed().get_shape_type();
+            switch (type)
+            {
+            case Bed3D::EShapeType::Circle: {
+                Vec2d center;
+                double radius;
+                if (Bed3D::is_circle(wxGetApp().plater()->get_bed().get_shape(), &center, &radius)) {
+                    m_volumes.set_print_volume({ static_cast<int>(type),
+                        { float(center.x()), float(center.y()), float(radius) + BedEpsilon, 0.0f },
+                        { 0.0f, float(m_config->opt_float("max_print_height")) } });
+                }
+                break;
+            }
+            case Bed3D::EShapeType::Rectangle: {
+                const BoundingBoxf3& bed_bb = wxGetApp().plater()->get_bed().get_bounding_box(false);
+                m_volumes.set_print_volume({ static_cast<int>(type),
+                    { float(bed_bb.min.x()) - BedEpsilon, float(bed_bb.min.y()) - BedEpsilon, float(bed_bb.max.x()) + BedEpsilon, float(bed_bb.max.y()) + BedEpsilon },
+                    { 0.0f, float(m_config->opt_float("max_print_height")) } });
+                break;
+            }
+            default:
+            case Bed3D::EShapeType::Custom: {
+                m_volumes.set_print_volume({ static_cast<int>(type),
+                    { 0.0f, 0.0f, 0.0f, 0.0f },
+                    { 0.0f, 0.0f } });
+            }
+            }
+#else
             const BoundingBoxf3& bed_bb = wxGetApp().plater()->get_bed().get_bounding_box(false);
-            m_volumes.set_print_box((float)bed_bb.min(0) - BedEpsilon, (float)bed_bb.min(1) - BedEpsilon, 0.0f, (float)bed_bb.max(0) + BedEpsilon, (float)bed_bb.max(1) + BedEpsilon, (float)m_config->opt_float("max_print_height"));
+            m_volumes.set_print_box((float)bed_bb.min.x() - BedEpsilon, (float)bed_bb.min.y() - BedEpsilon, 0.0f, (float)bed_bb.max.x() + BedEpsilon, (float)bed_bb.max.y() + BedEpsilon, (float)m_config->opt_float("max_print_height"));
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+            if (m_requires_check_outside_state) {
+                m_volumes.check_outside_state(m_config, nullptr);
+                m_requires_check_outside_state = false;
+            }
+#else
             m_volumes.check_outside_state(m_config, nullptr);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         }
+#if !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     }
+#endif // !ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     if (m_use_clipping_planes)
         m_volumes.set_z_range(-m_clipping_planes[0].get_data()[3], m_clipping_planes[1].get_data()[3]);
@@ -5106,7 +5169,11 @@ void GLCanvas3D::_render_objects(GLVolumeCollection::ERenderType type)
     m_volumes.set_clipping_plane(m_camera_clipping_plane.get_data());
     m_volumes.set_show_sinking_contours(! m_gizmos.is_hiding_instances());
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    GLShaderProgram* shader = wxGetApp().get_shader("gouraud_mod");
+#else
     GLShaderProgram* shader = wxGetApp().get_shader("gouraud");
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     if (shader != nullptr) {
         shader->start_using();
 
@@ -5751,7 +5818,7 @@ void GLCanvas3D::_load_print_toolpaths()
         total_layer_count = std::max(total_layer_count, print_object->total_layer_count());
     }
     size_t skirt_height = print->has_infinite_skirt() ? total_layer_count : std::min<size_t>(print->config().skirt_height.value, total_layer_count);
-    if ((skirt_height == 0) && print->has_brim())
+    if (skirt_height == 0 && print->has_brim())
         skirt_height = 1;
 
     // Get first skirt_height layers.
@@ -5784,6 +5851,9 @@ void GLCanvas3D::_load_print_toolpaths()
             reserve_new_volume_finalize_old_volume(*volume, vol, m_initialized);
         }
     }
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    volume->calc_convex_hull_3d();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     volume->indexed_vertex_array.finalize_geometry(m_initialized);
 }
 
@@ -6074,8 +6144,16 @@ void GLCanvas3D::_load_print_object_toolpaths(const PrintObject& print_object, c
         std::remove_if(m_volumes.volumes.begin() + volumes_cnt_initial, m_volumes.volumes.end(),
         [](const GLVolume *volume) { return volume->empty(); }),
         m_volumes.volumes.end());
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    for (size_t i = volumes_cnt_initial; i < m_volumes.volumes.size(); ++i) {
+        GLVolume* v = m_volumes.volumes[i];
+        v->calc_convex_hull_3d();
+        v->indexed_vertex_array.finalize_geometry(m_initialized);
+    }
+#else
     for (size_t i = volumes_cnt_initial; i < m_volumes.volumes.size(); ++i)
         m_volumes.volumes[i]->indexed_vertex_array.finalize_geometry(m_initialized);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     BOOST_LOG_TRIVIAL(debug) << "Loading print object toolpaths in parallel - end" << m_volumes.log_memory_info() << log_memory_info();
 }
@@ -6083,7 +6161,7 @@ void GLCanvas3D::_load_print_object_toolpaths(const PrintObject& print_object, c
 void GLCanvas3D::_load_wipe_tower_toolpaths(const std::vector<std::string>& str_tool_colors)
 {
     const Print *print = this->fff_print();
-    if ((print == nullptr) || print->wipe_tower_data().tool_changes.empty())
+    if (print == nullptr || print->wipe_tower_data().tool_changes.empty())
         return;
 
     if (!print->is_step_done(psWipeTower))
@@ -6231,8 +6309,16 @@ void GLCanvas3D::_load_wipe_tower_toolpaths(const std::vector<std::string>& str_
         std::remove_if(m_volumes.volumes.begin() + volumes_cnt_initial, m_volumes.volumes.end(),
         [](const GLVolume *volume) { return volume->empty(); }),
         m_volumes.volumes.end());
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    for (size_t i = volumes_cnt_initial; i < m_volumes.volumes.size(); ++i) {
+        GLVolume* v = m_volumes.volumes[i];
+        v->calc_convex_hull_3d();
+        v->indexed_vertex_array.finalize_geometry(m_initialized);
+    }
+#else
     for (size_t i = volumes_cnt_initial; i < m_volumes.volumes.size(); ++i)
         m_volumes.volumes[i]->indexed_vertex_array.finalize_geometry(m_initialized);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     BOOST_LOG_TRIVIAL(debug) << "Loading wipe tower toolpaths in parallel - end" << m_volumes.log_memory_info() << log_memory_info();
 }
@@ -6294,18 +6380,26 @@ void GLCanvas3D::_load_sla_shells()
 
 void GLCanvas3D::_update_toolpath_volumes_outside_state()
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    check_volumes_outside_state(true);
+#else
     BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
     for (GLVolume* volume : m_volumes.volumes) {
         volume->is_outside = (test_volume.radius() > 0.0 && volume->is_extrusion_path) ? !test_volume.contains(volume->bounding_box()) : false;
     }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void GLCanvas3D::_update_sla_shells_outside_state()
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    check_volumes_outside_state();
+#else
     BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
     for (GLVolume* volume : m_volumes.volumes) {
         volume->is_outside = (test_volume.radius() > 0.0 && volume->shader_outside_printer_detection_enabled) ? !test_volume.contains(volume->transformed_convex_hull_bounding_box()) : false;
     }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void GLCanvas3D::_set_warning_notification_if_needed(EWarning warning)
@@ -6316,12 +6410,18 @@ void GLCanvas3D::_set_warning_notification_if_needed(EWarning warning)
         show = _is_any_volume_outside();
     else {
         if (wxGetApp().is_editor()) {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+            if (current_printer_technology() != ptSLA)
+                show = m_gcode_viewer.has_data() && !m_gcode_viewer.is_contained_in_bed();
+#else
             BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
             const BoundingBoxf3& paths_volume = m_gcode_viewer.get_paths_bounding_box();
             if (test_volume.radius() > 0.0 && paths_volume.radius() > 0.0)
                 show = !test_volume.contains(paths_volume);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
         }
     }
+
     _set_warning_notification(warning, show);
 }
 
@@ -6366,7 +6466,7 @@ void GLCanvas3D::_set_warning_notification(EWarning warning, bool state)
             "Resolve the current problem to continue slicing.");
         error = ErrorType::PLATER_ERROR;
         break;
-}
+    }
     auto& notification_manager = *wxGetApp().plater()->get_notification_manager();
     switch (error)
     {
@@ -6396,7 +6496,7 @@ void GLCanvas3D::_set_warning_notification(EWarning warning, bool state)
 bool GLCanvas3D::_is_any_volume_outside() const
 {
     for (const GLVolume* volume : m_volumes.volumes) {
-        if ((volume != nullptr) && volume->is_outside)
+        if (volume != nullptr && volume->is_outside)
             return true;
     }
 

src/slic3r/GUI/GLCanvas3D.hpp

@@ -475,6 +475,9 @@ private:
     const DynamicPrintConfig* m_config;
     Model* m_model;
     BackgroundSlicingProcess *m_process;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool m_requires_check_outside_state{ false };
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     std::array<unsigned int, 2> m_old_size{ 0, 0 };
 
@@ -611,11 +614,18 @@ public:
     void post_event(wxEvent &&event);
 
     void set_as_dirty();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    void requires_check_outside_state() { m_requires_check_outside_state = true; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     unsigned int get_volumes_count() const;
     const GLVolumeCollection& get_volumes() const { return m_volumes; }
     void reset_volumes();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    ModelInstanceEPrintVolumeState check_volumes_outside_state(bool as_toolpaths = false) const;
+#else
     ModelInstanceEPrintVolumeState check_volumes_outside_state() const;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
 #if ENABLE_SEAMS_USING_MODELS
     void init_gcode_viewer() { m_gcode_viewer.init(); }

src/slic3r/GUI/GLShadersManager.cpp

@@ -61,10 +61,15 @@ std::pair<bool, std::string> GLShadersManager::init()
     // used to render extrusion and travel paths as lines in gcode preview
     valid &= append_shader("toolpaths_lines", { "toolpaths_lines.vs", "toolpaths_lines.fs" });
     // used to render objects in 3d editor
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    // When setting this technology to default rename the following from "gouraud_mod" to "gouraud"
+    valid &= append_shader("gouraud_mod", { "gouraud_mod.vs", "gouraud_mod.fs" }
+#else
     valid &= append_shader("gouraud", { "gouraud.vs", "gouraud.fs" }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 #if ENABLE_ENVIRONMENT_MAP
         , { "ENABLE_ENVIRONMENT_MAP"sv }
-#endif
+#endif // ENABLE_ENVIRONMENT_MAP
         );
     // used to render variable layers heights in 3d editor
     valid &= append_shader("variable_layer_height", { "variable_layer_height.vs", "variable_layer_height.fs" });

src/slic3r/GUI/GUI_ObjectManipulation.cpp

@@ -635,7 +635,6 @@ void ObjectManipulation::update_if_dirty()
         update(m_cache.rotation, m_cache.rotation_rounded, meRotation, m_new_rotation);
     }
 
-
     if (selection.requires_uniform_scale()) {
         m_lock_bnt->SetLock(true);
         m_lock_bnt->SetToolTip(_L("You cannot use non-uniform scaling mode for multiple objects/parts selection"));
@@ -658,8 +657,14 @@ void ObjectManipulation::update_if_dirty()
     else
         m_og->disable();
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    if (!selection.is_dragging()) {
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     update_reset_buttons_visibility();
     update_mirror_buttons_visibility();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     m_dirty = false;
 }

src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp

@@ -508,20 +508,23 @@ RENDER_AGAIN:
     m_imgui->begin(get_name(), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_AlwaysAutoResize | ImGuiWindowFlags_NoCollapse);
 
     // First calculate width of all the texts that are could possibly be shown. We will decide set the dialog width based on that:
-    const float settings_sliders_left =
+    const float clipping_slider_left = std::max(m_imgui->calc_text_size(m_desc.at("clipping_of_view")).x,
-      std::max({m_imgui->calc_text_size(m_desc.at("offset")).x,
+                                                m_imgui->calc_text_size(m_desc.at("reset_direction")).x) + m_imgui->scaled(0.5f);
-               m_imgui->calc_text_size(m_desc.at("quality")).x,
+
-               m_imgui->calc_text_size(m_desc.at("closing_distance")).x,
+    const float settings_sliders_left =
-               m_imgui->calc_text_size(m_desc.at("hole_diameter")).x,
+        std::max(std::max({m_imgui->calc_text_size(m_desc.at("offset")).x,
-               m_imgui->calc_text_size(m_desc.at("hole_depth")).x})
+                           m_imgui->calc_text_size(m_desc.at("quality")).x,
-           + m_imgui->scaled(1.f);
+                           m_imgui->calc_text_size(m_desc.at("closing_distance")).x,
+                           m_imgui->calc_text_size(m_desc.at("hole_diameter")).x,
+                           m_imgui->calc_text_size(m_desc.at("hole_depth")).x}) + m_imgui->scaled(0.5f), clipping_slider_left);
 
-    const float clipping_slider_left = std::max(m_imgui->calc_text_size(m_desc.at("clipping_of_view")).x, m_imgui->calc_text_size(m_desc.at("reset_direction")).x) + m_imgui->scaled(1.5f);
     const float diameter_slider_left = settings_sliders_left; //m_imgui->calc_text_size(m_desc.at("hole_diameter")).x + m_imgui->scaled(1.f);
     const float minimal_slider_width = m_imgui->scaled(4.f);
 
+    const float button_preview_width = m_imgui->calc_button_size(m_desc.at("preview")).x;
+
     float window_width = minimal_slider_width + std::max({settings_sliders_left, clipping_slider_left, diameter_slider_left});
-    window_width = std::max(window_width, m_imgui->calc_text_size(m_desc.at("preview")).x);
+    window_width = std::max(window_width, button_preview_width);
 
     if (m_imgui->button(m_desc["preview"]))
         hollow_mesh();
@@ -544,9 +547,9 @@ RENDER_AGAIN:
     float max_tooltip_width = ImGui::GetFontSize() * 20.0f;
     ImGui::AlignTextToFramePadding();
     m_imgui->text(m_desc.at("offset"));
-    ImGui::SameLine(settings_sliders_left);
+    ImGui::SameLine(settings_sliders_left, m_imgui->get_item_spacing().x);
     ImGui::PushItemWidth(window_width - settings_sliders_left);
-    m_imgui->slider_float("   ", &offset, offset_min, offset_max, "%.1f mm");
+    m_imgui->slider_float("##offset", &offset, offset_min, offset_max, "%.1f mm");
     if (ImGui::IsItemHovered())
         m_imgui->tooltip((_utf8(opts[0].second->tooltip)).c_str(), max_tooltip_width);
 
@@ -557,8 +560,8 @@ RENDER_AGAIN:
     if (current_mode >= quality_mode) {
         ImGui::AlignTextToFramePadding();
         m_imgui->text(m_desc.at("quality"));
-        ImGui::SameLine(settings_sliders_left);
+        ImGui::SameLine(settings_sliders_left, m_imgui->get_item_spacing().x);
-        m_imgui->slider_float("    ", &quality, quality_min, quality_max, "%.1f");
+        m_imgui->slider_float("##quality", &quality, quality_min, quality_max, "%.1f");
         if (ImGui::IsItemHovered())
             m_imgui->tooltip((_utf8(opts[1].second->tooltip)).c_str(), max_tooltip_width);
 
@@ -570,8 +573,8 @@ RENDER_AGAIN:
     if (current_mode >= closing_d_mode) {
         ImGui::AlignTextToFramePadding();
         m_imgui->text(m_desc.at("closing_distance"));
-        ImGui::SameLine(settings_sliders_left);
+        ImGui::SameLine(settings_sliders_left, m_imgui->get_item_spacing().x);
-        m_imgui->slider_float("      ", &closing_d, closing_d_min, closing_d_max, "%.1f mm");
+        m_imgui->slider_float("##closing_distance", &closing_d, closing_d_min, closing_d_max, "%.1f mm");
         if (ImGui::IsItemHovered())
             m_imgui->tooltip((_utf8(opts[2].second->tooltip)).c_str(), max_tooltip_width);
 
@@ -614,11 +617,11 @@ RENDER_AGAIN:
         m_new_hole_radius = diameter_upper_cap / 2.f;
     ImGui::AlignTextToFramePadding();
     m_imgui->text(m_desc.at("hole_diameter"));
-    ImGui::SameLine(diameter_slider_left);
+    ImGui::SameLine(diameter_slider_left, m_imgui->get_item_spacing().x);
     ImGui::PushItemWidth(window_width - diameter_slider_left);
 
     float diam = 2.f * m_new_hole_radius;
-    m_imgui->slider_float("", &diam, 1.f, 15.f, "%.1f mm", 1.f, false);
+    m_imgui->slider_float("##hole_diameter", &diam, 1.f, 15.f, "%.1f mm", 1.f, false);
     // Let's clamp the value (which could have been entered by keyboard) to a larger range
     // than the slider. This allows entering off-scale values and still protects against
     //complete non-sense.
@@ -630,8 +633,8 @@ RENDER_AGAIN:
 
     ImGui::AlignTextToFramePadding();
     m_imgui->text(m_desc["hole_depth"]);
-    ImGui::SameLine(diameter_slider_left);
+    ImGui::SameLine(diameter_slider_left, m_imgui->get_item_spacing().x);
-    m_imgui->slider_float("  ", &m_new_hole_height, 0.f, 10.f, "%.1f mm", 1.f, false);
+    m_imgui->slider_float("##hole_depth", &m_new_hole_height, 0.f, 10.f, "%.1f mm", 1.f, false);
     // Same as above:
     m_new_hole_height = std::clamp(m_new_hole_height, 0.f, 100.f);
 
@@ -697,10 +700,10 @@ RENDER_AGAIN:
         }
     }
 
-    ImGui::SameLine(clipping_slider_left);
+    ImGui::SameLine(settings_sliders_left, m_imgui->get_item_spacing().x);
-    ImGui::PushItemWidth(window_width - clipping_slider_left);
+    ImGui::PushItemWidth(window_width - settings_sliders_left);
     float clp_dist = m_c->object_clipper()->get_position();
-    if (m_imgui->slider_float("     ", &clp_dist, 0.f, 1.f, "%.2f"))
+    if (m_imgui->slider_float("##clp_dist", &clp_dist, 0.f, 1.f, "%.2f"))
         m_c->object_clipper()->set_position(clp_dist, true);
 
     // make sure supports are shown/hidden as appropriate

src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp

@@ -66,12 +66,20 @@ GLGizmoPainterBase::ClippingPlaneDataWrapper GLGizmoPainterBase::get_clipping_pl
 
 void GLGizmoPainterBase::render_triangles(const Selection& selection) const
 {
-    auto *shader = wxGetApp().get_shader("gouraud");
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    auto* shader = wxGetApp().get_shader("gouraud_mod");
+#else
+    auto* shader = wxGetApp().get_shader("gouraud");
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     if (! shader)
         return;
     shader->start_using();
     shader->set_uniform("slope.actived", false);
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    shader->set_uniform("print_volume.type", 0);
+#else
     shader->set_uniform("print_box.actived", false);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     shader->set_uniform("clipping_plane", this->get_clipping_plane_data().clp_dataf);
     ScopeGuard guard([shader]() { if (shader) shader->stop_using(); });
 
@@ -98,7 +106,11 @@ void GLGizmoPainterBase::render_triangles(const Selection& selection) const
         // to the shader input variable print_box.volume_world_matrix before
         // rendering the painted triangles. When this matrix is not set, the
         // wrong transformation matrix is used for "Clipping of view".
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+        shader->set_uniform("volume_world_matrix", trafo_matrix);
+#else
         shader->set_uniform("print_box.volume_world_matrix", trafo_matrix);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
         m_triangle_selectors[mesh_id]->render(m_imgui);
 
@@ -575,7 +587,11 @@ void TriangleSelectorGUI::render(ImGuiWrapper* imgui)
     auto* shader = wxGetApp().get_current_shader();
     if (! shader)
         return;
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    assert(shader->get_name() == "gouraud_mod");
+#else
     assert(shader->get_name() == "gouraud");
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
     ScopeGuard guard([shader]() { if (shader) shader->set_uniform("offset_depth_buffer", false);});
     shader->set_uniform("offset_depth_buffer", true);
     for (auto iva : {std::make_pair(&m_iva_enforcers, enforcers_color),

src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp

@@ -673,7 +673,7 @@ RENDER_AGAIN:
         //  - keep updating the head radius during sliding so it is continuosly refreshed in 3D scene
         //  - take correct undo/redo snapshot after the user is done with moving the slider
         float initial_value = m_new_point_head_diameter;
-        m_imgui->slider_float("", &m_new_point_head_diameter, 0.1f, diameter_upper_cap, "%.1f");
+        m_imgui->slider_float("##head_diameter", &m_new_point_head_diameter, 0.1f, diameter_upper_cap, "%.1f");
         if (ImGui::IsItemClicked()) {
             if (m_old_point_head_diameter == 0.f)
                 m_old_point_head_diameter = initial_value;
@@ -733,7 +733,7 @@ RENDER_AGAIN:
         float density = static_cast<const ConfigOptionInt*>(opts[0])->value;
         float minimal_point_distance = static_cast<const ConfigOptionFloat*>(opts[1])->value;
 
-        m_imgui->slider_float("", &minimal_point_distance, 0.f, 20.f, "%.f mm");
+        m_imgui->slider_float("##minimal_point_distance", &minimal_point_distance, 0.f, 20.f, "%.f mm");
         bool slider_clicked = ImGui::IsItemClicked(); // someone clicked the slider
         bool slider_edited = ImGui::IsItemEdited(); // someone is dragging the slider
         bool slider_released = ImGui::IsItemDeactivatedAfterEdit(); // someone has just released the slider
@@ -742,7 +742,7 @@ RENDER_AGAIN:
         m_imgui->text(m_desc.at("points_density"));
         ImGui::SameLine(settings_sliders_left);
 
-        m_imgui->slider_float(" ", &density, 0.f, 200.f, "%.f %%");
+        m_imgui->slider_float("##points_density", &density, 0.f, 200.f, "%.f %%");
         slider_clicked |= ImGui::IsItemClicked();
         slider_edited |= ImGui::IsItemEdited();
         slider_released |= ImGui::IsItemDeactivatedAfterEdit();
@@ -802,7 +802,7 @@ RENDER_AGAIN:
     ImGui::SameLine(clipping_slider_left);
     ImGui::PushItemWidth(window_width - clipping_slider_left);
     float clp_dist = m_c->object_clipper()->get_position();
-    if (m_imgui->slider_float("  ", &clp_dist, 0.f, 1.f, "%.2f"))
+    if (m_imgui->slider_float("##clp_dist", &clp_dist, 0.f, 1.f, "%.2f"))
         m_c->object_clipper()->set_position(clp_dist, true);
 
 

src/slic3r/GUI/ImGuiWrapper.cpp

@@ -280,7 +280,7 @@ void ImGuiWrapper::render()
     m_new_frame_open = false;
 }
 
-ImVec2 ImGuiWrapper::calc_text_size(const wxString &text, float wrap_width)
+ImVec2 ImGuiWrapper::calc_text_size(const wxString &text, float wrap_width) const
 {
     auto text_utf8 = into_u8(text);
     ImVec2 size = ImGui::CalcTextSize(text_utf8.c_str(), NULL, false, wrap_width);
@@ -293,6 +293,22 @@ ImVec2 ImGuiWrapper::calc_text_size(const wxString &text, float wrap_width)
     return size;
 }
 
+ImVec2 ImGuiWrapper::calc_button_size(const wxString &text, const ImVec2 &button_size) const
+{
+    const ImVec2        text_size = this->calc_text_size(text);
+    const ImGuiContext &g         = *GImGui;
+    const ImGuiStyle   &style     = g.Style;
+
+    return ImGui::CalcItemSize(button_size, text_size.x + style.FramePadding.x * 2.0f, text_size.y + style.FramePadding.y * 2.0f);
+}
+
+ImVec2 ImGuiWrapper::get_item_spacing() const
+{
+    const ImGuiContext &g     = *GImGui;
+    const ImGuiStyle   &style = g.Style;
+    return g.Style.ItemSpacing;
+}
+
 float ImGuiWrapper::get_slider_float_height() const
 {
     const ImGuiContext& g = *GImGui;

src/slic3r/GUI/ImGuiWrapper.hpp

@@ -53,9 +53,11 @@ public:
 
     float scaled(float x) const { return x * m_font_size; }
     ImVec2 scaled(float x, float y) const { return ImVec2(x * m_font_size, y * m_font_size); }
-    ImVec2 calc_text_size(const wxString &text, float wrap_width = -1.0f);
+    ImVec2 calc_text_size(const wxString &text, float wrap_width = -1.0f) const;
+    ImVec2 calc_button_size(const wxString &text, const ImVec2 &button_size = ImVec2(0, 0)) const;
 
-    float get_slider_float_height() const;
+    ImVec2 get_item_spacing() const;
+    float  get_slider_float_height() const;
 
     void set_next_window_pos(float x, float y, int flag, float pivot_x = 0.0f, float pivot_y = 0.0f);
     void set_next_window_bg_alpha(float alpha);

src/slic3r/GUI/Plater.cpp

@@ -48,6 +48,7 @@
 #include "libslic3r/SLAPrint.hpp"
 #include "libslic3r/Utils.hpp"
 #include "libslic3r/PresetBundle.hpp"
+#include "libslic3r/ClipperUtils.hpp"
 
 #include "GUI.hpp"
 #include "GUI_App.hpp"
@@ -3007,12 +3008,19 @@ void Plater::priv::schedule_background_process()
 
 void Plater::priv::update_print_volume_state()
 {
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    const ConfigOptionPoints* opt = dynamic_cast<const ConfigOptionPoints*>(this->config->option("bed_shape"));
+    const Polygon bed_poly = offset(Polygon::new_scale(opt->values), static_cast<float>(scale_(BedEpsilon))).front();
+    const float bed_height = this->config->opt_float("max_print_height");
+    this->q->model().update_print_volume_state(bed_poly, bed_height);
+#else
     BoundingBox     bed_box_2D = get_extents(Polygon::new_scale(this->config->opt<ConfigOptionPoints>("bed_shape")->values));
     BoundingBoxf3   print_volume(unscale(bed_box_2D.min(0), bed_box_2D.min(1), 0.0), unscale(bed_box_2D.max(0), bed_box_2D.max(1), scale_(this->config->opt_float("max_print_height"))));
     // Allow the objects to protrude below the print bed, only the part of the object above the print bed will be sliced.
     print_volume.offset(BedEpsilon);
     print_volume.min(2) = -1e10;
     this->q->model().update_print_volume_state(print_volume);
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 

src/slic3r/GUI/Selection.cpp

@@ -112,6 +112,9 @@ Selection::Selection()
     , m_type(Empty)
     , m_valid(false)
     , m_scale_factor(1.0f)
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    , m_dragging(false)
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 {
     this->set_bounding_boxes_dirty();
 }
@@ -690,6 +693,10 @@ void Selection::start_dragging()
     if (!m_valid)
         return;
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    m_dragging = true;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
     set_caches();
 }
 
@@ -730,6 +737,9 @@ void Selection::translate(const Vec3d& displacement, bool local)
 
     ensure_not_below_bed();
     set_bounding_boxes_dirty();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    wxGetApp().plater()->canvas3D()->requires_check_outside_state();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 // Rotate an object around one of the axes. Only one rotation component is expected to be changing.
@@ -842,7 +852,10 @@ void Selection::rotate(const Vec3d& rotation, TransformationType transformation_
         volume.set_volume_offset(volume.get_volume_offset() + center_local - center_local_new);
     }
 
-    this->set_bounding_boxes_dirty();
+    set_bounding_boxes_dirty();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    wxGetApp().plater()->canvas3D()->requires_check_outside_state();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void Selection::flattening_rotate(const Vec3d& normal)
@@ -941,6 +954,9 @@ void Selection::scale(const Vec3d& scale, TransformationType transformation_type
 
     ensure_on_bed();
     set_bounding_boxes_dirty();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    wxGetApp().plater()->canvas3D()->requires_check_outside_state();
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 }
 
 void Selection::scale_to_fit_print_volume(const DynamicPrintConfig& config)
@@ -2140,10 +2156,10 @@ void Selection::ensure_not_below_bed()
         GLVolume* volume = (*m_volumes)[i];
         if (!volume->is_wipe_tower && !volume->is_modifier) {
             const double max_z = volume->transformed_convex_hull_bounding_box().max.z();
-            std::pair<int, int> instance = std::make_pair(volume->object_idx(), volume->instance_idx());
+            const std::pair<int, int> instance = std::make_pair(volume->object_idx(), volume->instance_idx());
             InstancesToZMap::iterator it = instances_max_z.find(instance);
             if (it == instances_max_z.end())
-                it = instances_max_z.insert(InstancesToZMap::value_type(instance, -DBL_MAX)).first;
+                it = instances_max_z.insert({ instance, -DBL_MAX }).first;
 
             it->second = std::max(it->second, max_z);
         }
@@ -2152,17 +2168,17 @@ void Selection::ensure_not_below_bed()
     if (is_any_volume()) {
         for (unsigned int i : m_list) {
             GLVolume& volume = *(*m_volumes)[i];
-            std::pair<int, int> instance = std::make_pair(volume.object_idx(), volume.instance_idx());
+            const std::pair<int, int> instance = std::make_pair(volume.object_idx(), volume.instance_idx());
-            InstancesToZMap::iterator it = instances_max_z.find(instance);
+            InstancesToZMap::const_iterator it = instances_max_z.find(instance);
-            double z_shift = SINKING_MIN_Z_THRESHOLD - it->second;
+            const double z_shift = SINKING_MIN_Z_THRESHOLD - it->second;
             if (it != instances_max_z.end() && z_shift > 0.0)
                 volume.set_volume_offset(Z, volume.get_volume_offset(Z) + z_shift);
         }
     }
     else {
         for (GLVolume* volume : *m_volumes) {
-            std::pair<int, int> instance = std::make_pair(volume->object_idx(), volume->instance_idx());
+            const std::pair<int, int> instance = std::make_pair(volume->object_idx(), volume->instance_idx());
-            InstancesToZMap::iterator it = instances_max_z.find(instance);
+            InstancesToZMap::const_iterator it = instances_max_z.find(instance);
             if (it != instances_max_z.end() && it->second < SINKING_MIN_Z_THRESHOLD)
                 volume->set_instance_offset(Z, volume->get_instance_offset(Z) + SINKING_MIN_Z_THRESHOLD - it->second);
         }

src/slic3r/GUI/Selection.hpp

@@ -220,6 +220,10 @@ private:
 
     float m_scale_factor;
 
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    bool m_dragging;
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+
 public:
     Selection();
 
@@ -312,6 +316,10 @@ public:
     const BoundingBoxf3& get_scaled_instance_bounding_box() const;
 
     void start_dragging();
+#if ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
+    void stop_dragging() { m_dragging = false; }
+    bool is_dragging() const { return m_dragging; }
+#endif // ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS
 
     void translate(const Vec3d& displacement, bool local = false);
     void rotate(const Vec3d& rotation, TransformationType transformation_type);