Refactoring: moved Slic3r::GCode::Base to Slic3r::GCode::Writer
This commit is contained in:
Alessandro Ranellucci
parent
c2e710d092
commit
7f57f007cd
@ -56,6 +56,7 @@ use Slic3r::GCode::PlaceholderParser;
|
||||
use Slic3r::GCode::Reader;
|
||||
use Slic3r::GCode::SpiralVase;
|
||||
use Slic3r::GCode::VibrationLimit;
|
||||
use Slic3r::GCode::Writer;
|
||||
use Slic3r::Geometry qw(PI);
|
||||
use Slic3r::Geometry::Clipper;
|
||||
use Slic3r::Layer;
|
||||
|
||||
@ -9,9 +9,10 @@ use Slic3r::Geometry qw(epsilon scale unscale scaled_epsilon points_coincide PI
|
||||
use Slic3r::Geometry::Clipper qw(union_ex offset_ex);
|
||||
use Slic3r::Surface ':types';
|
||||
|
||||
extends 'Slic3r::GCode::Base';
|
||||
|
||||
has 'config' => (is => 'ro', default => sub { Slic3r::Config::Full->new });
|
||||
has '_writer' => (is => 'ro', default => sub { Slic3r::GCode::Writer->new },
|
||||
handles => [qw(set_fan set_temperature set_bed_temperature
|
||||
extruders reset_e multiple_extruders extruder)]);
|
||||
has 'placeholder_parser' => (is => 'rw', default => sub { Slic3r::GCode::PlaceholderParser->new });
|
||||
has 'ooze_prevention' => (is => 'rw');
|
||||
has 'enable_loop_clipping' => (is => 'rw', default => sub {1});
|
||||
@ -36,17 +37,17 @@ has 'wipe_path' => (is => 'rw');
|
||||
sub apply_print_config {
|
||||
my ($self, $print_config) = @_;
|
||||
|
||||
$self->SUPER::apply_print_config($print_config);
|
||||
$self->_writer->apply_print_config($print_config);
|
||||
$self->config->apply_print_config($print_config);
|
||||
}
|
||||
|
||||
sub set_extruders {
|
||||
my ($self, $extruder_ids) = @_;
|
||||
|
||||
$self->SUPER::set_extruders($extruder_ids);
|
||||
$self->_writer->set_extruders($extruder_ids);
|
||||
|
||||
# enable wipe path generation if any extruder has wipe enabled
|
||||
$self->enable_wipe(defined first { $_->wipe } values %{$self->_extruders});
|
||||
$self->enable_wipe(defined first { $self->config->get_at('wipe', $_) } @$extruder_ids);
|
||||
}
|
||||
|
||||
sub set_shift {
|
||||
@ -82,15 +83,14 @@ sub change_layer {
|
||||
my $gcode = "";
|
||||
if (defined $self->layer_count) {
|
||||
# TODO: cap this to 99% and add an explicit M73 P100 in the end G-code
|
||||
$gcode .= $self->update_progress(int(99 * ($self->_layer_index / ($self->layer_count - 1))));
|
||||
$gcode .= $self->_writer->update_progress(int(99 * ($self->_layer_index / ($self->layer_count - 1))));
|
||||
}
|
||||
|
||||
my $z = $layer->print_z + $self->config->z_offset; # in unscaled coordinates
|
||||
if ($self->_extruder->retract_layer_change && $self->will_move_z($z)) {
|
||||
if ($self->config->get_at('retract_layer_change', $self->_writer->extruder->id) && $self->_writer->will_move_z($z)) {
|
||||
$gcode .= $self->retract;
|
||||
$gcode .= $self->lift;
|
||||
}
|
||||
$gcode .= $self->travel_to_z($z, 'move to next layer (' . $self->layer->id . ')');
|
||||
$gcode .= $self->_writer->travel_to_z($z, 'move to next layer (' . $self->layer->id . ')');
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
@ -120,7 +120,7 @@ sub extrude_loop {
|
||||
} elsif ($self->config->seam_position eq 'nearest' || $self->config->seam_position eq 'aligned') {
|
||||
# simplify polygon in order to skip false positives in concave/convex detection
|
||||
my $polygon = $loop->polygon;
|
||||
my @simplified = @{$polygon->simplify(scale $self->_extruder->nozzle_diameter/2)};
|
||||
my @simplified = @{$polygon->simplify(scale $self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)/2)};
|
||||
|
||||
# concave vertices have priority
|
||||
my @candidates = map @{$_->concave_points(PI*4/3)}, @simplified;
|
||||
@ -166,7 +166,7 @@ sub extrude_loop {
|
||||
# if polyline was shorter than the clipping distance we'd get a null polyline, so
|
||||
# we discard it in that case
|
||||
my $clip_length = $self->enable_loop_clipping
|
||||
? scale($self->_extruder->nozzle_diameter) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER
|
||||
? scale($self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER
|
||||
: 0;
|
||||
|
||||
# get paths
|
||||
@ -183,7 +183,7 @@ sub extrude_loop {
|
||||
my $gcode = join '', map $self->_extrude_path($_, $description, $speed), @paths;
|
||||
|
||||
# reset acceleration
|
||||
$gcode .= $self->set_acceleration($self->config->default_acceleration);
|
||||
$gcode .= $self->_writer->set_acceleration($self->config->default_acceleration);
|
||||
|
||||
$self->wipe_path($paths[-1]->polyline->clone) if $self->enable_wipe; # TODO: don't limit wipe to last path
|
||||
|
||||
@ -200,7 +200,7 @@ sub extrude_loop {
|
||||
# we make sure we don't exceed the segment length because we don't know
|
||||
# the rotation of the second segment so we might cross the object boundary
|
||||
my $first_segment = Slic3r::Line->new(@$last_path_polyline[0,1]);
|
||||
my $distance = min(scale($self->_extruder->nozzle_diameter), $first_segment->length);
|
||||
my $distance = min(scale($self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)), $first_segment->length);
|
||||
my $point = $first_segment->point_at($distance);
|
||||
$point->rotate($angle, $last_path_polyline->first_point);
|
||||
|
||||
@ -217,7 +217,7 @@ sub extrude_path {
|
||||
my $gcode = $self->_extrude_path($path, $description, $speed);
|
||||
|
||||
# reset acceleration
|
||||
$gcode .= $self->set_acceleration($self->config->default_acceleration);
|
||||
$gcode .= $self->_writer->set_acceleration($self->config->default_acceleration);
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -252,12 +252,12 @@ sub _extrude_path {
|
||||
} else {
|
||||
$acceleration = $self->config->default_acceleration;
|
||||
}
|
||||
$gcode .= $self->set_acceleration($acceleration);
|
||||
$gcode .= $self->_writer->set_acceleration($acceleration);
|
||||
}
|
||||
|
||||
# calculate extrusion length per distance unit
|
||||
my $e_per_mm = $self->_extruder->e_per_mm3 * $path->mm3_per_mm;
|
||||
$e_per_mm = 0 if !$self->_extrusion_axis;
|
||||
my $e_per_mm = $self->_writer->extruder->e_per_mm3 * $path->mm3_per_mm;
|
||||
$e_per_mm = 0 if !$self->_writer->_extrusion_axis;
|
||||
|
||||
# set speed
|
||||
my $F;
|
||||
@ -289,10 +289,11 @@ sub _extrude_path {
|
||||
$gcode .= ";_BRIDGE_FAN_START\n" if $path->is_bridge;
|
||||
my $path_length = unscale $path->length;
|
||||
{
|
||||
$gcode .= $path->gcode($self->_extruder, $e_per_mm, $F,
|
||||
$self->shift_x - $self->_extruder->extruder_offset->x,
|
||||
$self->shift_y - $self->_extruder->extruder_offset->y, #,,
|
||||
$self->_extrusion_axis,
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->_writer->extruder->id);
|
||||
$gcode .= $path->gcode($self->_writer->extruder, $e_per_mm, $F,
|
||||
$self->shift_x - $extruder_offset->x,
|
||||
$self->shift_y - $extruder_offset->y, #,,
|
||||
$self->_writer->_extrusion_axis,
|
||||
$self->config->gcode_comments ? " ; $description" : "");
|
||||
|
||||
if ($self->enable_wipe) {
|
||||
@ -324,7 +325,7 @@ sub travel_to {
|
||||
|
||||
# skip retraction if the travel move is contained in an island in the current layer
|
||||
# *and* in an island in the upper layer (so that the ooze will not be visible)
|
||||
if ($travel->length < scale $self->_extruder->retract_before_travel
|
||||
if ($travel->length < scale $self->config->get_at('retract_before_travel', $self->_writer->extruder->id)
|
||||
|| ($self->config->only_retract_when_crossing_perimeters
|
||||
&& $self->config->fill_density > 0
|
||||
&& (first { $_->contains_line($travel) } @{$self->_upper_layer_islands})
|
||||
@ -332,11 +333,11 @@ sub travel_to {
|
||||
|| (defined $role && $role == EXTR_ROLE_SUPPORTMATERIAL && (first { $_->contains_line($travel) } @{$self->layer->support_islands}))
|
||||
) {
|
||||
$self->straight_once(0);
|
||||
$gcode .= $self->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
$gcode .= $self->_writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
} elsif (!$self->config->avoid_crossing_perimeters || $self->straight_once) {
|
||||
$self->straight_once(0);
|
||||
$gcode .= $self->retract;
|
||||
$gcode .= $self->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
$gcode .= $self->_writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
} else {
|
||||
if ($self->new_object) {
|
||||
$self->new_object(0);
|
||||
@ -383,7 +384,7 @@ sub _plan {
|
||||
# append the actual path and return
|
||||
# use G1 because we rely on paths being straight (G0 may make round paths)
|
||||
$gcode .= join '',
|
||||
map $self->travel_to_xy($self->point_to_gcode($_->b), $comment),
|
||||
map $self->_writer->travel_to_xy($self->point_to_gcode($_->b), $comment),
|
||||
@travel;
|
||||
return $gcode;
|
||||
}
|
||||
@ -391,25 +392,25 @@ sub _plan {
|
||||
sub retract {
|
||||
my ($self, $toolchange) = @_;
|
||||
|
||||
return "" if !defined $self->_extruder;
|
||||
return "" if !defined $self->_writer->extruder;
|
||||
|
||||
my $gcode = "";
|
||||
|
||||
# wipe (if it's enabled for this extruder and we have a stored wipe path)
|
||||
if ($self->_extruder->wipe && $self->wipe_path) {
|
||||
if ($self->config->get_at('wipe', $self->_writer->extruder->id) && $self->wipe_path) {
|
||||
# Reduce feedrate a bit; travel speed is often too high to move on existing material.
|
||||
# Too fast = ripping of existing material; too slow = short wipe path, thus more blob.
|
||||
my $wipe_speed = $self->gcode_config->travel_speed * 0.8;
|
||||
my $wipe_speed = $self->_writer->config->travel_speed * 0.8;
|
||||
|
||||
# get the retraction length
|
||||
my $length = $toolchange
|
||||
? $self->_extruder->retract_length
|
||||
: $self->_extruder->retract_length_toolchange;
|
||||
? $self->_writer->extruder->retract_length
|
||||
: $self->_writer->extruder->retract_length_toolchange;
|
||||
|
||||
# Calculate how long we need to travel in order to consume the required
|
||||
# amount of retraction. In other words, how far do we move in XY at $wipe_speed
|
||||
# for the time needed to consume retract_length at retract_speed?
|
||||
my $wipe_dist = scale($length / $self->_extruder->retract_speed * $wipe_speed);
|
||||
my $wipe_dist = scale($length / $self->_writer->extruder->retract_speed * $wipe_speed);
|
||||
|
||||
# Take the stored wipe path and replace first point with the current actual position
|
||||
# (they might be different, for example, in case of loop clipping).
|
||||
@ -427,25 +428,25 @@ sub retract {
|
||||
# Reduce retraction length a bit to avoid effective retraction speed to be greater than the configured one
|
||||
# due to rounding (TODO: test and/or better math for this)
|
||||
my $dE = $length * ($segment_length / $wipe_dist) * 0.95;
|
||||
$gcode .= $self->set_speed($wipe_speed*60);
|
||||
$gcode .= $self->extrude_to_xy(
|
||||
$gcode .= $self->_writer->set_speed($wipe_speed*60);
|
||||
$gcode .= $self->_writer->extrude_to_xy(
|
||||
$self->point_to_gcode($line->b),
|
||||
-$dE,
|
||||
'retract;_WIPE',
|
||||
);
|
||||
$retracted += $dE;
|
||||
}
|
||||
$self->_extruder->set_retracted($self->_extruder->retracted + $retracted);
|
||||
$self->_writer->extruder->set_retracted($self->_writer->extruder->retracted + $retracted);
|
||||
}
|
||||
|
||||
# The parent class will decide whether we need to perform an actual retraction
|
||||
# (the extruder might be already retracted fully or partially). We call these
|
||||
# methods even if we performed wipe, since this will ensure the entire retraction
|
||||
# length is honored in case wipe path was too short.p
|
||||
$gcode .= $toolchange ? $self->retract_for_toolchange : $self->SUPER::retract;
|
||||
$gcode .= $toolchange ? $self->_writer->retract_for_toolchange : $self->_writer->retract;
|
||||
|
||||
$gcode .= $self->reset_e;
|
||||
$gcode .= $self->lift;
|
||||
$gcode .= $self->_writer->reset_e;
|
||||
$gcode .= $self->_writer->lift;
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -454,8 +455,8 @@ sub unretract {
|
||||
my ($self) = @_;
|
||||
|
||||
my $gcode = "";
|
||||
$gcode .= $self->unlift;
|
||||
$gcode .= $self->SUPER::unretract('compensate retraction');
|
||||
$gcode .= $self->_writer->unlift;
|
||||
$gcode .= $self->_writer->unretract('compensate retraction');
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
@ -463,29 +464,30 @@ sub unretract {
|
||||
sub point_to_gcode {
|
||||
my ($self, $point) = @_;
|
||||
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->_writer->extruder->id);
|
||||
return Slic3r::Pointf->new(
|
||||
($point->x * &Slic3r::SCALING_FACTOR) + $self->shift_x - $self->_extruder->extruder_offset->x,
|
||||
($point->y * &Slic3r::SCALING_FACTOR) + $self->shift_y - $self->_extruder->extruder_offset->y, #**
|
||||
($point->x * &Slic3r::SCALING_FACTOR) + $self->shift_x - $extruder_offset->x,
|
||||
($point->y * &Slic3r::SCALING_FACTOR) + $self->shift_y - $extruder_offset->y, #**
|
||||
);
|
||||
}
|
||||
|
||||
sub set_extruder {
|
||||
my ($self, $extruder_id) = @_;
|
||||
|
||||
return "" if !$self->need_toolchange($extruder_id);
|
||||
return "" if !$self->_writer->need_toolchange($extruder_id);
|
||||
|
||||
# if we are running a single-extruder setup, just set the extruder and return nothing
|
||||
if (!$self->_multiple_extruders) {
|
||||
return $self->_toolchange($extruder_id);
|
||||
if (!$self->_writer->multiple_extruders) {
|
||||
return $self->_writer->toolchange($extruder_id);
|
||||
}
|
||||
|
||||
# prepend retraction on the current extruder
|
||||
my $gcode = $self->retract(1);
|
||||
|
||||
# append custom toolchange G-code
|
||||
if (defined $self->_extruder && $self->config->toolchange_gcode) {
|
||||
if (defined $self->_writer->extruder && $self->config->toolchange_gcode) {
|
||||
$gcode .= sprintf "%s\n", $self->placeholder_parser->process($self->config->toolchange_gcode, {
|
||||
previous_extruder => $self->_extruder->id,
|
||||
previous_extruder => $self->_writer->extruder->id,
|
||||
next_extruder => $extruder_id,
|
||||
});
|
||||
}
|
||||
@ -493,10 +495,10 @@ sub set_extruder {
|
||||
# if ooze prevention is enabled, park current extruder in the nearest
|
||||
# standby point and set it to the standby temperature
|
||||
$gcode .= $self->ooze_prevention->pre_toolchange($self)
|
||||
if $self->ooze_prevention && defined $self->_extruder;
|
||||
if $self->ooze_prevention && defined $self->_writer->extruder;
|
||||
|
||||
# append the toolchange command
|
||||
$gcode .= $self->_toolchange($extruder_id);
|
||||
$gcode .= $self->_writer->toolchange($extruder_id);
|
||||
|
||||
# set the new extruder to the operating temperature
|
||||
$gcode .= $self->ooze_prevention->post_toolchange($self)
|
||||
|
||||
@ -4,7 +4,7 @@ use Moo;
|
||||
use List::Util qw(first);
|
||||
use Slic3r::Geometry qw(X Y unscale);
|
||||
|
||||
has 'print' => (is => 'ro', required => 1);
|
||||
has 'print' => (is => 'ro', required => 1, handles => [qw(config)]);
|
||||
has 'gcodegen' => (is => 'ro', required => 1, handles => [qw(extruders)]);
|
||||
has 'shift' => (is => 'ro', default => sub { [0,0] });
|
||||
|
||||
@ -64,8 +64,9 @@ sub process_layer {
|
||||
|
||||
if (!$self->second_layer_things_done && $layer->id == 1) {
|
||||
for my $extruder (@{$self->extruders}) {
|
||||
$gcode .= $self->gcodegen->set_temperature($extruder->temperature, 0, $extruder->id)
|
||||
if $extruder->temperature && $extruder->temperature != $extruder->first_layer_temperature;
|
||||
my $temperature = $self->config->get_at('temperature', $extruder->id);
|
||||
$gcode .= $self->gcodegen->set_temperature($temperature, 0, $extruder->id)
|
||||
if $temperature && $temperature != $self->config->get_at('first_layer_temperature', $extruder->id);
|
||||
}
|
||||
$gcode .= $self->gcodegen->set_bed_temperature($self->print->config->bed_temperature)
|
||||
if $self->print->config->bed_temperature && $self->print->config->bed_temperature != $self->print->config->first_layer_bed_temperature;
|
||||
@ -135,9 +136,9 @@ sub process_layer {
|
||||
|
||||
# tweak region ordering to save toolchanges
|
||||
my @region_ids = 0 .. ($self->print->region_count-1);
|
||||
if ($self->gcodegen->has_multiple_extruders) {
|
||||
my $last_extruder = $self->gcodegen->extruder;
|
||||
my $best_region_id = first { $self->print->regions->[$_]->config->perimeter_extruder-1 eq $last_extruder } @region_ids;
|
||||
if ($self->gcodegen->multiple_extruders) {
|
||||
my $last_extruder_id = $self->gcodegen->extruder->id;
|
||||
my $best_region_id = first { $self->print->regions->[$_]->config->perimeter_extruder-1 == $last_extruder_id } @region_ids;
|
||||
@region_ids = ($best_region_id, grep $_ != $best_region_id, @region_ids) if $best_region_id;
|
||||
}
|
||||
|
||||
@ -175,7 +176,7 @@ sub process_layer {
|
||||
# give priority to infill if we were already using its extruder and it wouldn't
|
||||
# be good for perimeters
|
||||
if ($self->print->config->infill_first
|
||||
|| ($self->gcodegen->has_multiple_extruders && $region->config->infill_extruder-1 == $self->gcodegen->extruder->id && $region->config->infill_extruder != $region->config->perimeter_extruder)) {
|
||||
|| ($self->gcodegen->multiple_extruders && $region->config->infill_extruder-1 == $self->gcodegen->extruder->id && $region->config->infill_extruder != $region->config->perimeter_extruder)) {
|
||||
$gcode .= $self->_extrude_infill($infill_by_island[$i], $region);
|
||||
$gcode .= $self->_extrude_perimeters($perimeters_by_island[$i], $region);
|
||||
} else {
|
||||
|
||||
@ -21,8 +21,8 @@ sub pre_toolchange {
|
||||
|
||||
if ($gcodegen->config->standby_temperature_delta != 0) {
|
||||
my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
|
||||
? $gcodegen->_extruder->first_layer_temperature
|
||||
: $gcodegen->_extruder->temperature;
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->extruder->id);
|
||||
# we assume that heating is always slower than cooling, so no need to block
|
||||
$gcode .= $gcodegen->set_temperature($temp + $gcodegen->config->standby_temperature_delta, 0);
|
||||
}
|
||||
@ -37,8 +37,8 @@ sub post_toolchange {
|
||||
|
||||
if ($gcodegen->config->standby_temperature_delta != 0) {
|
||||
my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
|
||||
? $gcodegen->_extruder->first_layer_temperature
|
||||
: $gcodegen->_extruder->temperature;
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->extruder->id);
|
||||
$gcode .= $gcodegen->set_temperature($temp, 1);
|
||||
}
|
||||
|
||||
|
||||
@ -1,14 +1,14 @@
|
||||
package Slic3r::GCode::Base;
|
||||
package Slic3r::GCode::Writer;
|
||||
use Moo;
|
||||
|
||||
use List::Util qw(min max first);
|
||||
use Slic3r::Geometry qw(X Y epsilon);
|
||||
|
||||
has 'gcode_config' => (is => 'ro', default => sub { Slic3r::Config::GCode->new });
|
||||
has 'config' => (is => 'ro', default => sub { Slic3r::Config::GCode->new });
|
||||
has 'multiple_extruders' => (is => 'rw', default => sub { 0 });
|
||||
has '_extrusion_axis' => (is => 'rw', default => sub { 'E' });
|
||||
has '_extruders' => (is => 'ro', default => sub {{}});
|
||||
has '_extruder' => (is => 'rw');
|
||||
has '_multiple_extruders' => (is => 'rw', default => sub { 0 });
|
||||
has '_extruder' => (is => 'rw', reader => 'extruder');
|
||||
has '_last_acceleration' => (is => 'rw', default => sub { 0 });
|
||||
has '_last_fan_speed' => (is => 'rw', default => sub { 0 });
|
||||
has '_lifted' => (is => 'rw', default => sub { 0 });
|
||||
@ -17,14 +17,14 @@ has '_pos' => (is => 'rw', default => sub { Slic3r::Pointf3->ne
|
||||
sub apply_print_config {
|
||||
my ($self, $print_config) = @_;
|
||||
|
||||
$self->gcode_config->apply_print_config($print_config);
|
||||
$self->config->apply_print_config($print_config);
|
||||
|
||||
if ($self->gcode_config->gcode_flavor eq 'mach3') {
|
||||
if ($self->config->gcode_flavor eq 'mach3') {
|
||||
$self->_extrusion_axis('A');
|
||||
} elsif ($self->gcode_config->gcode_flavor eq 'no-extrusion') {
|
||||
} elsif ($self->config->gcode_flavor eq 'no-extrusion') {
|
||||
$self->_extrusion_axis('');
|
||||
} else {
|
||||
$self->_extrusion_axis($self->gcode_config->extrusion_axis);
|
||||
$self->_extrusion_axis($self->config->extrusion_axis);
|
||||
}
|
||||
}
|
||||
|
||||
@ -38,23 +38,23 @@ sub set_extruders {
|
||||
# we enable support for multiple extruder if any extruder greater than 0 is used
|
||||
# (even if prints only uses that one) since we need to output Tx commands
|
||||
# first extruder has index 0
|
||||
$self->_multiple_extruders(max(@$extruder_ids) > 0);
|
||||
$self->multiple_extruders(max(@$extruder_ids) > 0);
|
||||
}
|
||||
|
||||
sub set_temperature {
|
||||
my ($self, $temperature, $wait, $tool) = @_;
|
||||
|
||||
return "" if $wait && $self->gcode_config->gcode_flavor =~ /^(?:makerware|sailfish)$/;
|
||||
return "" if $wait && $self->config->gcode_flavor =~ /^(?:makerware|sailfish)$/;
|
||||
|
||||
my ($code, $comment) = ($wait && $self->gcode_config->gcode_flavor ne 'teacup')
|
||||
my ($code, $comment) = ($wait && $self->config->gcode_flavor ne 'teacup')
|
||||
? ('M109', 'wait for temperature to be reached')
|
||||
: ('M104', 'set temperature');
|
||||
my $gcode = sprintf "$code %s%d %s; $comment\n",
|
||||
($self->gcode_config->gcode_flavor eq 'mach3' ? 'P' : 'S'), $temperature,
|
||||
(defined $tool && ($self->_multiple_extruders || $self->gcode_config->gcode_flavor =~ /^(?:makerware|sailfish)$/)) ? "T$tool " : "";
|
||||
($self->config->gcode_flavor eq 'mach3' ? 'P' : 'S'), $temperature,
|
||||
(defined $tool && ($self->multiple_extruders || $self->config->gcode_flavor =~ /^(?:makerware|sailfish)$/)) ? "T$tool " : "";
|
||||
|
||||
$gcode .= "M116 ; wait for temperature to be reached\n"
|
||||
if $self->gcode_config->gcode_flavor eq 'teacup' && $wait;
|
||||
if $self->config->gcode_flavor eq 'teacup' && $wait;
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -62,14 +62,14 @@ sub set_temperature {
|
||||
sub set_bed_temperature {
|
||||
my ($self, $temperature, $wait) = @_;
|
||||
|
||||
my ($code, $comment) = ($wait && $self->gcode_config->gcode_flavor ne 'teacup')
|
||||
? (($self->gcode_config->gcode_flavor =~ /^(?:makerware|sailfish)$/ ? 'M109' : 'M190'), 'wait for bed temperature to be reached')
|
||||
my ($code, $comment) = ($wait && $self->config->gcode_flavor ne 'teacup')
|
||||
? (($self->config->gcode_flavor =~ /^(?:makerware|sailfish)$/ ? 'M109' : 'M190'), 'wait for bed temperature to be reached')
|
||||
: ('M140', 'set bed temperature');
|
||||
my $gcode = sprintf "$code %s%d ; $comment\n",
|
||||
($self->gcode_config->gcode_flavor eq 'mach3' ? 'P' : 'S'), $temperature;
|
||||
($self->config->gcode_flavor eq 'mach3' ? 'P' : 'S'), $temperature;
|
||||
|
||||
$gcode .= "M116 ; wait for bed temperature to be reached\n"
|
||||
if $self->gcode_config->gcode_flavor eq 'teacup' && $wait;
|
||||
if $self->config->gcode_flavor eq 'teacup' && $wait;
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -80,18 +80,18 @@ sub set_fan {
|
||||
if ($self->_last_fan_speed != $speed || $dont_save) {
|
||||
$self->_last_fan_speed($speed) if !$dont_save;
|
||||
if ($speed == 0) {
|
||||
my $code = $self->gcode_config->gcode_flavor eq 'teacup'
|
||||
my $code = $self->config->gcode_flavor eq 'teacup'
|
||||
? 'M106 S0'
|
||||
: $self->gcode_config->gcode_flavor =~ /^(?:makerware|sailfish)$/
|
||||
: $self->config->gcode_flavor =~ /^(?:makerware|sailfish)$/
|
||||
? 'M127'
|
||||
: 'M107';
|
||||
return sprintf "$code%s\n", ($self->gcode_config->gcode_comments ? ' ; disable fan' : '');
|
||||
return sprintf "$code%s\n", ($self->config->gcode_comments ? ' ; disable fan' : '');
|
||||
} else {
|
||||
if ($self->gcode_config->gcode_flavor =~ /^(?:makerware|sailfish)$/) {
|
||||
return sprintf "M126%s\n", ($self->gcode_config->gcode_comments ? ' ; enable fan' : '');
|
||||
if ($self->config->gcode_flavor =~ /^(?:makerware|sailfish)$/) {
|
||||
return sprintf "M126%s\n", ($self->config->gcode_comments ? ' ; enable fan' : '');
|
||||
} else {
|
||||
return sprintf "M106 %s%d%s\n", ($self->gcode_config->gcode_flavor eq 'mach3' ? 'P' : 'S'),
|
||||
(255 * $speed / 100), ($self->gcode_config->gcode_comments ? ' ; enable fan' : '');
|
||||
return sprintf "M106 %s%d%s\n", ($self->config->gcode_flavor eq 'mach3' ? 'P' : 'S'),
|
||||
(255 * $speed / 100), ($self->config->gcode_comments ? ' ; enable fan' : '');
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -105,13 +105,13 @@ sub set_acceleration {
|
||||
|
||||
$self->_last_acceleration($acceleration);
|
||||
return sprintf "M204 S%s%s\n",
|
||||
$acceleration, ($self->gcode_config->gcode_comments ? ' ; adjust acceleration' : '');
|
||||
$acceleration, ($self->config->gcode_comments ? ' ; adjust acceleration' : '');
|
||||
}
|
||||
|
||||
sub update_progress {
|
||||
my ($self, $percent) = @_;
|
||||
|
||||
return "" if $self->gcode_config->gcode_flavor !~ /^(?:makerware|sailfish)$/;
|
||||
return "" if $self->config->gcode_flavor !~ /^(?:makerware|sailfish)$/;
|
||||
return sprintf "M73 P%s%s\n",
|
||||
int($percent),
|
||||
$self->_comment('update progress');
|
||||
@ -128,10 +128,10 @@ sub set_extruder {
|
||||
my ($self, $extruder_id) = @_;
|
||||
|
||||
return "" if !$self->need_toolchange;
|
||||
return $self->_toolchange($extruder_id);
|
||||
return $self->toolchange($extruder_id);
|
||||
}
|
||||
|
||||
sub _toolchange {
|
||||
sub toolchange {
|
||||
my ($self, $extruder_id) = @_;
|
||||
|
||||
# set the new extruder
|
||||
@ -140,15 +140,15 @@ sub _toolchange {
|
||||
# return the toolchange command
|
||||
# if we are running a single-extruder setup, just set the extruder and return nothing
|
||||
my $gcode = "";
|
||||
if ($self->_multiple_extruders) {
|
||||
if ($self->multiple_extruders) {
|
||||
$gcode .= sprintf "%s%d%s\n",
|
||||
($self->gcode_config->gcode_flavor eq 'makerware'
|
||||
($self->config->gcode_flavor eq 'makerware'
|
||||
? 'M135 T'
|
||||
: $self->gcode_config->gcode_flavor eq 'sailfish'
|
||||
: $self->config->gcode_flavor eq 'sailfish'
|
||||
? 'M108 T'
|
||||
: 'T'),
|
||||
$extruder_id,
|
||||
($self->gcode_config->gcode_comments ? ' ; change extruder' : '');
|
||||
($self->config->gcode_comments ? ' ; change extruder' : '');
|
||||
|
||||
$gcode .= $self->reset_e(1);
|
||||
}
|
||||
@ -165,8 +165,8 @@ sub reset_e {
|
||||
$self->_extruder->set_E(0) if $self->_extruder;
|
||||
}
|
||||
|
||||
if ($self->_extrusion_axis ne '' && !$self->gcode_config->use_relative_e_distances) {
|
||||
return sprintf "G92 %s0%s\n", $self->gcode_config->extrusion_axis, ($self->config->gcode_comments ? ' ; reset extrusion distance' : '');
|
||||
if ($self->_extrusion_axis ne '' && !$self->config->use_relative_e_distances) {
|
||||
return sprintf "G92 %s0%s\n", $self->config->extrusion_axis, ($self->config->gcode_comments ? ' ; reset extrusion distance' : '');
|
||||
} else {
|
||||
return "";
|
||||
}
|
||||
@ -194,7 +194,7 @@ sub travel_to_xy {
|
||||
$self->_pos->set_y($pointf->y); # ))
|
||||
return sprintf "G1 X%.3f Y%.3f F%.3f%s\n",
|
||||
@$pointf,
|
||||
$self->gcode_config->travel_speed*60,
|
||||
$self->config->travel_speed*60,
|
||||
$self->_comment($comment);
|
||||
}
|
||||
|
||||
@ -223,7 +223,7 @@ sub _travel_to_xyz {
|
||||
$self->_pos($pointf3);
|
||||
return sprintf "G1 X%.3f Y%.3f Z%.3f F%.3f%s\n",
|
||||
@$pointf3,
|
||||
$self->gcode_config->travel_speed*60,
|
||||
$self->config->travel_speed*60,
|
||||
$self->_comment($comment);
|
||||
}
|
||||
|
||||
@ -251,7 +251,7 @@ sub _travel_to_z {
|
||||
$self->_pos->set_z($z);
|
||||
return sprintf "G1 Z%.3f F%.3f%s\n",
|
||||
$z,
|
||||
$self->gcode_config->travel_speed*60,
|
||||
$self->config->travel_speed*60,
|
||||
$self->_comment($comment);
|
||||
}
|
||||
|
||||
@ -318,7 +318,7 @@ sub retract_for_toolchange {
|
||||
sub _retract {
|
||||
my ($self, $length, $restart_extra, $comment) = @_;
|
||||
|
||||
if ($self->gcode_config->use_firmware_retraction) {
|
||||
if ($self->config->use_firmware_retraction) {
|
||||
return "G10 ; retract\n";
|
||||
}
|
||||
|
||||
@ -329,11 +329,11 @@ sub _retract {
|
||||
$self->_extrusion_axis,
|
||||
$self->_extruder->E,
|
||||
$self->_extruder->retract_speed_mm_min,
|
||||
$self->_comment($comment . " dE = $dE");
|
||||
$self->_comment($comment);
|
||||
}
|
||||
|
||||
$gcode .= "M103 ; extruder off\n"
|
||||
if $self->gcode_config->gcode_flavor eq 'makerware';
|
||||
if $self->config->gcode_flavor eq 'makerware';
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -344,9 +344,9 @@ sub unretract {
|
||||
my $gcode = "";
|
||||
|
||||
$gcode .= "M101 ; extruder on\n"
|
||||
if $self->gcode_config->gcode_flavor eq 'makerware';
|
||||
if $self->config->gcode_flavor eq 'makerware';
|
||||
|
||||
if ($self->gcode_config->use_firmware_retraction) {
|
||||
if ($self->config->use_firmware_retraction) {
|
||||
$gcode .= "G11 ; unretract\n";
|
||||
$gcode .= $self->reset_e;
|
||||
return $gcode;
|
||||
@ -371,8 +371,8 @@ sub unretract {
|
||||
sub lift {
|
||||
my ($self) = @_;
|
||||
|
||||
if ($self->_lifted == 0 && $self->gcode_config->retract_lift->[0] > 0) {
|
||||
my $to_lift = $self->gcode_config->retract_lift->[0];
|
||||
if ($self->_lifted == 0 && $self->config->retract_lift->[0] > 0) {
|
||||
my $to_lift = $self->config->retract_lift->[0];
|
||||
$self->_lifted($to_lift);
|
||||
return $self->_travel_to_z($self->_pos->z + $to_lift, 'lift Z');
|
||||
}
|
||||
@ -390,14 +390,9 @@ sub unlift {
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
sub has_multiple_extruders {
|
||||
sub hasmultiple_extruders {
|
||||
my ($self) = @_;
|
||||
return $self->_multiple_extruders;
|
||||
}
|
||||
|
||||
sub extruder {
|
||||
my ($self) = @_;
|
||||
return $self->_extruder;
|
||||
return $self->multiple_extruders;
|
||||
}
|
||||
|
||||
sub extruders {
|
||||
@ -875,8 +875,9 @@ sub write_gcode {
|
||||
if ($finished_objects > 0) {
|
||||
$gcodegen->set_shift(map unscale $copy->[$_], X,Y);
|
||||
print $fh $gcodegen->retract;
|
||||
print $fh $gcodegen->travel_to_xy(
|
||||
$gcodegen->point_to_gcode($object->_copies_shift->negative),
|
||||
print $fh $gcodegen->travel_to(
|
||||
$object->_copies_shift->negative,
|
||||
undef,
|
||||
'move to origin position for next object',
|
||||
);
|
||||
}
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
use Test::More tests => 18;
|
||||
use Test::More tests => 14;
|
||||
use strict;
|
||||
use warnings;
|
||||
|
||||
|
||||
@ -123,12 +123,12 @@ ConfigBase::get(t_config_option_key opt_key) {
|
||||
av_store(av, it - optv->values.begin(), newSVpvn_utf8(it->c_str(), it->length(), true));
|
||||
return newRV_noinc((SV*)av);
|
||||
} else if (ConfigOptionPoint* optv = dynamic_cast<ConfigOptionPoint*>(opt)) {
|
||||
return optv->point.to_SV_pureperl();
|
||||
return perl_to_SV_clone_ref(optv->point);
|
||||
} else if (ConfigOptionPoints* optv = dynamic_cast<ConfigOptionPoints*>(opt)) {
|
||||
AV* av = newAV();
|
||||
av_fill(av, optv->values.size()-1);
|
||||
for (Pointfs::iterator it = optv->values.begin(); it != optv->values.end(); ++it)
|
||||
av_store(av, it - optv->values.begin(), it->to_SV_pureperl());
|
||||
av_store(av, it - optv->values.begin(), perl_to_SV_clone_ref(*it));
|
||||
return newRV_noinc((SV*)av);
|
||||
} else if (ConfigOptionBool* optv = dynamic_cast<ConfigOptionBool*>(opt)) {
|
||||
return newSViv(optv->value ? 1 : 0);
|
||||
@ -158,7 +158,7 @@ ConfigBase::get_at(t_config_option_key opt_key, size_t i) {
|
||||
std::string val = optv->get_at(i);
|
||||
return newSVpvn_utf8(val.c_str(), val.length(), true);
|
||||
} else if (ConfigOptionPoints* optv = dynamic_cast<ConfigOptionPoints*>(opt)) {
|
||||
return optv->get_at(i).to_SV_pureperl();
|
||||
return perl_to_SV_clone_ref(optv->get_at(i));
|
||||
} else if (ConfigOptionBools* optv = dynamic_cast<ConfigOptionBools*>(opt)) {
|
||||
return newSViv(optv->get_at(i) ? 1 : 0);
|
||||
} else {
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
Extruder::Extruder(int id, PrintConfig *config)
|
||||
Extruder::Extruder(int id, GCodeConfig *config)
|
||||
: id(id),
|
||||
config(config)
|
||||
{
|
||||
@ -91,18 +91,6 @@ Extruder::used_filament() const
|
||||
return this->absolute_E + this->retracted;
|
||||
}
|
||||
|
||||
Pointf
|
||||
Extruder::extruder_offset() const
|
||||
{
|
||||
return this->config->extruder_offset.get_at(this->id);
|
||||
}
|
||||
|
||||
double
|
||||
Extruder::nozzle_diameter() const
|
||||
{
|
||||
return this->config->nozzle_diameter.get_at(this->id);
|
||||
}
|
||||
|
||||
double
|
||||
Extruder::filament_diameter() const
|
||||
{
|
||||
@ -115,18 +103,6 @@ Extruder::extrusion_multiplier() const
|
||||
return this->config->extrusion_multiplier.get_at(this->id);
|
||||
}
|
||||
|
||||
int
|
||||
Extruder::temperature() const
|
||||
{
|
||||
return this->config->temperature.get_at(this->id);
|
||||
}
|
||||
|
||||
int
|
||||
Extruder::first_layer_temperature() const
|
||||
{
|
||||
return this->config->first_layer_temperature.get_at(this->id);
|
||||
}
|
||||
|
||||
double
|
||||
Extruder::retract_length() const
|
||||
{
|
||||
@ -151,18 +127,6 @@ Extruder::retract_restart_extra() const
|
||||
return this->config->retract_restart_extra.get_at(this->id);
|
||||
}
|
||||
|
||||
double
|
||||
Extruder::retract_before_travel() const
|
||||
{
|
||||
return this->config->retract_before_travel.get_at(this->id);
|
||||
}
|
||||
|
||||
bool
|
||||
Extruder::retract_layer_change() const
|
||||
{
|
||||
return this->config->retract_layer_change.get_at(this->id);
|
||||
}
|
||||
|
||||
double
|
||||
Extruder::retract_length_toolchange() const
|
||||
{
|
||||
@ -175,12 +139,6 @@ Extruder::retract_restart_extra_toolchange() const
|
||||
return this->config->retract_restart_extra_toolchange.get_at(this->id);
|
||||
}
|
||||
|
||||
bool
|
||||
Extruder::wipe() const
|
||||
{
|
||||
return this->config->wipe.get_at(this->id);
|
||||
}
|
||||
|
||||
|
||||
#ifdef SLIC3RXS
|
||||
REGISTER_CLASS(Extruder, "Extruder");
|
||||
|
||||
@ -10,7 +10,15 @@ namespace Slic3r {
|
||||
class Extruder
|
||||
{
|
||||
public:
|
||||
Extruder(int id, PrintConfig *config);
|
||||
int id;
|
||||
double E;
|
||||
double absolute_E;
|
||||
double retracted;
|
||||
double restart_extra;
|
||||
double e_per_mm3;
|
||||
double retract_speed_mm_min;
|
||||
|
||||
Extruder(int id, GCodeConfig *config);
|
||||
virtual ~Extruder() {}
|
||||
void reset();
|
||||
double extrude(double dE);
|
||||
@ -20,32 +28,17 @@ class Extruder
|
||||
double extruded_volume() const;
|
||||
double used_filament() const;
|
||||
|
||||
Pointf extruder_offset() const;
|
||||
double nozzle_diameter() const;
|
||||
double filament_diameter() const;
|
||||
double extrusion_multiplier() const;
|
||||
int temperature() const;
|
||||
int first_layer_temperature() const;
|
||||
double retract_length() const;
|
||||
double retract_lift() const;
|
||||
int retract_speed() const;
|
||||
double retract_restart_extra() const;
|
||||
double retract_before_travel() const;
|
||||
bool retract_layer_change() const;
|
||||
double retract_length_toolchange() const;
|
||||
double retract_restart_extra_toolchange() const;
|
||||
bool wipe() const;
|
||||
|
||||
int id;
|
||||
double E;
|
||||
double absolute_E;
|
||||
double retracted;
|
||||
double restart_extra;
|
||||
double e_per_mm3;
|
||||
double retract_speed_mm_min;
|
||||
|
||||
private:
|
||||
PrintConfig *config;
|
||||
GCodeConfig *config;
|
||||
};
|
||||
|
||||
}
|
||||
|
||||
@ -310,6 +310,8 @@ class GCodeConfig : public virtual StaticPrintConfig
|
||||
{
|
||||
public:
|
||||
ConfigOptionString extrusion_axis;
|
||||
ConfigOptionFloats extrusion_multiplier;
|
||||
ConfigOptionFloats filament_diameter;
|
||||
ConfigOptionBool gcode_comments;
|
||||
ConfigOptionEnum<GCodeFlavor> gcode_flavor;
|
||||
ConfigOptionFloats retract_length;
|
||||
@ -324,6 +326,10 @@ class GCodeConfig : public virtual StaticPrintConfig
|
||||
|
||||
GCodeConfig() : StaticPrintConfig() {
|
||||
this->extrusion_axis.value = "E";
|
||||
this->extrusion_multiplier.values.resize(1);
|
||||
this->extrusion_multiplier.values[0] = 1;
|
||||
this->filament_diameter.values.resize(1);
|
||||
this->filament_diameter.values[0] = 3;
|
||||
this->gcode_comments.value = false;
|
||||
this->gcode_flavor.value = gcfRepRap;
|
||||
this->retract_length.values.resize(1);
|
||||
@ -345,6 +351,8 @@ class GCodeConfig : public virtual StaticPrintConfig
|
||||
|
||||
ConfigOption* option(const t_config_option_key opt_key, bool create = false) {
|
||||
if (opt_key == "extrusion_axis") return &this->extrusion_axis;
|
||||
if (opt_key == "extrusion_multiplier") return &this->extrusion_multiplier;
|
||||
if (opt_key == "filament_diameter") return &this->filament_diameter;
|
||||
if (opt_key == "gcode_comments") return &this->gcode_comments;
|
||||
if (opt_key == "gcode_flavor") return &this->gcode_flavor;
|
||||
if (opt_key == "retract_length") return &this->retract_length;
|
||||
@ -379,10 +387,8 @@ class PrintConfig : public GCodeConfig
|
||||
ConfigOptionFloat extruder_clearance_height;
|
||||
ConfigOptionFloat extruder_clearance_radius;
|
||||
ConfigOptionPoints extruder_offset;
|
||||
ConfigOptionFloats extrusion_multiplier;
|
||||
ConfigOptionBool fan_always_on;
|
||||
ConfigOptionInt fan_below_layer_time;
|
||||
ConfigOptionFloats filament_diameter;
|
||||
ConfigOptionFloat first_layer_acceleration;
|
||||
ConfigOptionInt first_layer_bed_temperature;
|
||||
ConfigOptionFloatOrPercent first_layer_extrusion_width;
|
||||
@ -440,12 +446,8 @@ class PrintConfig : public GCodeConfig
|
||||
this->extruder_clearance_radius.value = 20;
|
||||
this->extruder_offset.values.resize(1);
|
||||
this->extruder_offset.values[0] = Pointf(0,0);
|
||||
this->extrusion_multiplier.values.resize(1);
|
||||
this->extrusion_multiplier.values[0] = 1;
|
||||
this->fan_always_on.value = false;
|
||||
this->fan_below_layer_time.value = 60;
|
||||
this->filament_diameter.values.resize(1);
|
||||
this->filament_diameter.values[0] = 3;
|
||||
this->first_layer_acceleration.value = 0;
|
||||
this->first_layer_bed_temperature.value = 0;
|
||||
this->first_layer_extrusion_width.value = 200;
|
||||
@ -507,10 +509,8 @@ class PrintConfig : public GCodeConfig
|
||||
if (opt_key == "extruder_clearance_height") return &this->extruder_clearance_height;
|
||||
if (opt_key == "extruder_clearance_radius") return &this->extruder_clearance_radius;
|
||||
if (opt_key == "extruder_offset") return &this->extruder_offset;
|
||||
if (opt_key == "extrusion_multiplier") return &this->extrusion_multiplier;
|
||||
if (opt_key == "fan_always_on") return &this->fan_always_on;
|
||||
if (opt_key == "fan_below_layer_time") return &this->fan_below_layer_time;
|
||||
if (opt_key == "filament_diameter") return &this->filament_diameter;
|
||||
if (opt_key == "first_layer_acceleration") return &this->first_layer_acceleration;
|
||||
if (opt_key == "first_layer_bed_temperature") return &this->first_layer_bed_temperature;
|
||||
if (opt_key == "first_layer_extrusion_width") return &this->first_layer_extrusion_width;
|
||||
|
||||
@ -6,9 +6,7 @@
|
||||
%}
|
||||
|
||||
%name{Slic3r::Extruder} class Extruder {
|
||||
// We don't need a Perl constructor with PrintConfig at the moment
|
||||
//Extruder(int id, PrintConfig *config);
|
||||
Extruder(int id, FullPrintConfig *config);
|
||||
Extruder(int id, GCodeConfig *config);
|
||||
~Extruder();
|
||||
void reset();
|
||||
double extrude(double dE);
|
||||
@ -18,43 +16,36 @@
|
||||
double extruded_volume();
|
||||
double used_filament();
|
||||
|
||||
int id() const
|
||||
int id()
|
||||
%code%{ RETVAL = THIS->id; %};
|
||||
|
||||
double E() const
|
||||
double E()
|
||||
%code%{ RETVAL = THIS->E; %};
|
||||
double set_E(double val) const
|
||||
double set_E(double val)
|
||||
%code%{ RETVAL = THIS->E = val; %};
|
||||
double absolute_E() const
|
||||
double absolute_E()
|
||||
%code%{ RETVAL = THIS->absolute_E; %};
|
||||
double set_absolute_E(double val) const
|
||||
double set_absolute_E(double val)
|
||||
%code%{ RETVAL = THIS->absolute_E = val; %};
|
||||
double retracted() const
|
||||
double retracted()
|
||||
%code%{ RETVAL = THIS->retracted; %};
|
||||
double set_retracted(double val) const
|
||||
double set_retracted(double val)
|
||||
%code%{ RETVAL = THIS->retracted = val; %};
|
||||
double restart_extra() const
|
||||
double restart_extra()
|
||||
%code%{ RETVAL = THIS->restart_extra; %};
|
||||
double set_restart_extra(double val) const
|
||||
double set_restart_extra(double val)
|
||||
%code%{ RETVAL = THIS->restart_extra = val; %};
|
||||
double e_per_mm3()
|
||||
%code%{ RETVAL = THIS->e_per_mm3; %};
|
||||
double retract_speed_mm_min()
|
||||
%code%{ RETVAL = THIS->retract_speed_mm_min; %};
|
||||
|
||||
Clone<Pointf> extruder_offset() const;
|
||||
double nozzle_diameter() const;
|
||||
double filament_diameter() const;
|
||||
double extrusion_multiplier() const;
|
||||
int temperature() const;
|
||||
int first_layer_temperature() const;
|
||||
double retract_length() const;
|
||||
double retract_lift() const;
|
||||
int retract_speed() const;
|
||||
double retract_restart_extra() const;
|
||||
double retract_before_travel() const;
|
||||
bool retract_layer_change() const;
|
||||
double retract_length_toolchange() const;
|
||||
double retract_restart_extra_toolchange() const;
|
||||
bool wipe() const;
|
||||
double filament_diameter();
|
||||
double extrusion_multiplier();
|
||||
double retract_length();
|
||||
double retract_lift();
|
||||
int retract_speed();
|
||||
double retract_restart_extra();
|
||||
double retract_length_toolchange();
|
||||
double retract_restart_extra_toolchange();
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user