Ported Slic3r::GCode storage to XS

lib/Slic3r.pm

@@ -194,6 +194,7 @@ sub thread_cleanup {
     *Slic3r::ExtrusionPath::DESTROY         = sub {};
     *Slic3r::ExtrusionPath::Collection::DESTROY = sub {};
     *Slic3r::Flow::DESTROY                  = sub {};
+    *Slic3r::GCode::DESTROY                 = sub {};
     *Slic3r::GCode::AvoidCrossingPerimeters::DESTROY = sub {};
     *Slic3r::GCode::OozePrevention::DESTROY = sub {};
     *Slic3r::GCode::PlaceholderParser::DESTROY = sub {};

lib/Slic3r/GCode.pm

@@ -1,5 +1,6 @@
 package Slic3r::GCode;
-use Moo;
+use strict;
+use warnings;
 
 use List::Util qw(min max first);
 use Slic3r::ExtrusionLoop ':roles';
@@ -7,28 +8,6 @@ use Slic3r::ExtrusionPath ':roles';
 use Slic3r::Geometry qw(epsilon scale unscale PI X Y B);
 use Slic3r::Geometry::Clipper qw(union_ex);
 
-# Origin of print coordinates expressed in unscaled G-code coordinates.
-# This affects the input arguments supplied to the extrude*() and travel_to()
-# methods.
-has 'origin'             => (is => 'rw', default => sub { Slic3r::Pointf->new });
-
-has 'config'             => (is => 'ro', default => sub { Slic3r::Config::Full->new });
-has 'writer'             => (is => 'ro', default => sub { Slic3r::GCode::Writer->new });
-has 'placeholder_parser' => (is => 'rw', default => sub { Slic3r::GCode::PlaceholderParser->new });
-has 'ooze_prevention'    => (is => 'rw', default => sub { Slic3r::GCode::OozePrevention->new });
-has 'wipe'               => (is => 'rw', default => sub { Slic3r::GCode::Wipe->new });
-has 'avoid_crossing_perimeters' => (is => 'rw', default => sub { Slic3r::GCode::AvoidCrossingPerimeters->new });
-has 'enable_loop_clipping' => (is => 'rw', default => sub {1});
-has 'enable_cooling_markers' => (is =>'rw', default => sub {0});
-has 'layer_count'        => (is => 'ro');
-has 'layer_index'        => (is => 'rw', default => sub {-1});  # just a counter
-has 'layer'              => (is => 'rw');
-has '_seam_position'     => (is => 'ro', default => sub { {} });  # $object => pos
-has 'first_layer'        => (is => 'rw', default => sub {0});   # this flag triggers first layer speeds
-has 'elapsed_time'       => (is => 'rw', default => sub {0} );  # seconds
-has 'last_pos'           => (is => 'rw', default => sub { Slic3r::Point->new(0,0) } );
-has 'volumetric_speed'   => (is => 'rw', default => sub {0});
-
 sub apply_print_config {
     my ($self, $print_config) = @_;
     
@@ -56,7 +35,7 @@ sub set_origin {
     $self->last_pos->translate(@translate);
     $self->wipe->path->translate(@translate) if $self->wipe->has_path;
     
-    $self->origin($pointf);
+    $self->_set_origin($pointf);
 }
 
 sub preamble {
@@ -76,9 +55,14 @@ sub preamble {
 sub change_layer {
     my ($self, $layer) = @_;
     
-    $self->layer($layer);
+    {
-    $self->layer_index($self->layer_index + 1);
+        my $l = $layer->isa('Slic3r::Layer::Support')
-    $self->first_layer($layer->id == 0);
+            ? $layer->as_layer
+            : $layer;
+        $self->set_layer($l);
+    }
+    $self->set_layer_index($self->layer_index + 1);
+    $self->set_first_layer($layer->id == 0);
     
     # avoid computing islands and overhangs if they're not needed
     if ($self->config->avoid_crossing_perimeters) {
@@ -88,7 +72,7 @@ sub change_layer {
     }
     
     my $gcode = "";
-    if (defined $self->layer_count) {
+    if ($self->layer_count > 0) {
         $gcode .= $self->writer->update_progress($self->layer_index, $self->layer_count);
     }
     
@@ -146,11 +130,9 @@ sub extrude_loop {
         @candidates = map @{$_->convex_points(PI*2/3)}, @simplified if !@candidates;
         
         # retrieve the last start position for this object
-        my $obj_ptr = 0;
+        if ($self->has_layer) {
-        if (defined $self->layer) {
+            if ($self->_has_seam_position($self->layer->object)) {
-            $obj_ptr = $self->layer->object->ptr;
+                $last_pos = $self->_seam_position($self->layer->object);
-            if (defined $self->_seam_position->{$obj_ptr}) {
-                $last_pos = $self->_seam_position->{$obj_ptr};
             }
         }
         
@@ -175,7 +157,8 @@ sub extrude_loop {
             $point = $last_pos->projection_onto_polygon($polygon);
             $loop->split_at($point);
         }
-        $self->_seam_position->{$obj_ptr} = $point;
+        $self->_set_seam_position($self->layer->object, $point)
+            if $self->has_layer;
     } elsif ($self->config->seam_position eq 'random') {
         if ($loop->role == EXTRL_ROLE_CONTOUR_INTERNAL_PERIMETER) {
             my $polygon = $loop->polygon;
@@ -211,7 +194,7 @@ sub extrude_loop {
     $self->wipe->set_path($paths[0]->polyline->clone) if $self->wipe->enable;  # TODO: don't limit wipe to last path
     
     # make a little move inwards before leaving loop
-    if ($paths[-1]->role == EXTR_ROLE_EXTERNAL_PERIMETER && defined $self->layer && $self->config->perimeters > 1) {
+    if ($paths[-1]->role == EXTR_ROLE_EXTERNAL_PERIMETER && $self->has_layer && $self->config->perimeters > 1) {
         my $last_path_polyline = $paths[-1]->polyline;
         # detect angle between last and first segment
         # the side depends on the original winding order of the polygon (left for contours, right for holes)
@@ -258,7 +241,7 @@ sub _extrude_path {
     {
         my $first_point = $path->first_point;
         $gcode .= $self->travel_to($first_point, $path->role, "move to first $description point")
-            if !defined $self->last_pos || !$self->last_pos->coincides_with($first_point);
+            if !$self->last_pos_defined || !$self->last_pos->coincides_with($first_point);
     }
     
     # compensate retraction
@@ -338,11 +321,11 @@ sub _extrude_path {
         }
     }
     $gcode .= ";_BRIDGE_FAN_END\n" if $path->is_bridge && $self->enable_cooling_markers;
-    $self->last_pos($path->last_point);
+    $self->set_last_pos($path->last_point);
     
     if ($self->config->cooling) {
         my $path_time = $path_length / $F * 60;
-        $self->elapsed_time($self->elapsed_time + $path_time);
+        $self->set_elapsed_time($self->elapsed_time + $path_time);
     }
     
     return $gcode;
@@ -394,12 +377,12 @@ sub needs_retraction {
         return 0;
     }
     
-    if (defined $role && $role == EXTR_ROLE_SUPPORTMATERIAL && $self->layer->support_islands->contains_polyline($travel)) {
+    if (defined $role && $role == EXTR_ROLE_SUPPORTMATERIAL && $self->layer->as_support_layer->support_islands->contains_polyline($travel)) {
         # skip retraction if this is a travel move inside a support material island
         return 0;
     }
     
-    if ($self->config->only_retract_when_crossing_perimeters && defined $self->layer) {
+    if ($self->config->only_retract_when_crossing_perimeters && $self->has_layer) {
         if ($self->config->fill_density > 0
             && $self->layer->any_internal_region_slice_contains_polyline($travel)) {
             # skip retraction if travel is contained in an internal slice *and*
@@ -527,7 +510,7 @@ sub pre_toolchange {
     }
     
     if ($gcodegen->config->standby_temperature_delta != 0) {
-        my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
+        my $temp = $gcodegen->has_layer && $gcodegen->layer->id == 0
             ? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->writer->extruder->id)
             : $gcodegen->config->get_at('temperature', $gcodegen->writer->extruder->id);
         # we assume that heating is always slower than cooling, so no need to block
@@ -543,7 +526,7 @@ sub post_toolchange {
     my $gcode = "";
     
     if ($gcodegen->config->standby_temperature_delta != 0) {
-        my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
+        my $temp = $gcodegen->has_layer && $gcodegen->layer->id == 0
             ? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->writer->extruder->id)
             : $gcodegen->config->get_at('temperature', $gcodegen->writer->extruder->id);
         $gcode .= $gcodegen->writer->set_temperature($temp, 1);

lib/Slic3r/GCode/CoolingBuffer.pm

@@ -27,7 +27,7 @@ sub append {
     $self->last_z->{$obj_id} = $print_z;
     $self->gcode($self->gcode . $gcode);
     $self->elapsed_time($self->elapsed_time + $self->gcodegen->elapsed_time);
-    $self->gcodegen->elapsed_time(0);
+    $self->gcodegen->set_elapsed_time(0);
     
     return $return;
 }

lib/Slic3r/Print/GCode.pm

@@ -35,12 +35,11 @@ sub BUILD {
         }
     
         # set up our helper object
-        my $gcodegen = Slic3r::GCode->new(
+        my $gcodegen = Slic3r::GCode->new;
-            placeholder_parser  => $self->placeholder_parser,
-            layer_count         => $layer_count,
-            enable_cooling_markers => 1,
-        );
         $self->_gcodegen($gcodegen);
+        $gcodegen->set_placeholder_parser($self->placeholder_parser);
+        $gcodegen->set_layer_count($layer_count);
+        $gcodegen->set_enable_cooling_markers(1);
         $gcodegen->apply_print_config($self->config);
         $gcodegen->set_extruders($self->print->extruders);
         
@@ -92,7 +91,7 @@ sub BUILD {
                         $self->config->max_volumetric_speed,
                     );
                 }
-                $gcodegen->volumetric_speed($volumetric_speed);
+                $gcodegen->set_volumetric_speed($volumetric_speed);
             }
         }
     }
@@ -247,7 +246,7 @@ sub export {
                 # no collision happens hopefully.
                 if ($finished_objects > 0) {
                     $gcodegen->set_origin(Slic3r::Pointf->new(map unscale $copy->[$_], X,Y));
-                    $gcodegen->enable_cooling_markers(0);  # we're not filtering these moves through CoolingBuffer
+                    $gcodegen->set_enable_cooling_markers(0);  # we're not filtering these moves through CoolingBuffer
                     $gcodegen->avoid_crossing_perimeters->set_use_external_mp_once(1);
                     print $fh $gcodegen->retract;
                     print $fh $gcodegen->travel_to(
@@ -255,7 +254,7 @@ sub export {
                         undef,
                         'move to origin position for next object',
                     );
-                    $gcodegen->enable_cooling_markers(1);
+                    $gcodegen->set_enable_cooling_markers(1);
                     
                     # disable motion planner when traveling to first object point
                     $gcodegen->avoid_crossing_perimeters->set_disable_once(1);
@@ -364,7 +363,7 @@ sub process_layer {
     }
     
     # if we're going to apply spiralvase to this layer, disable loop clipping
-    $self->_gcodegen->enable_loop_clipping(!defined $self->_spiral_vase || !$self->_spiral_vase->enable);
+    $self->_gcodegen->set_enable_loop_clipping(!defined $self->_spiral_vase || !$self->_spiral_vase->enable);
     
     if (!$self->_second_layer_things_done && $layer->id == 1) {
         for my $extruder (@{$self->_gcodegen->writer->extruders}) {

t/cooling.t

@@ -18,9 +18,12 @@ sub buffer {
     my $print_config = Slic3r::Config::Print->new;
     $print_config->apply_dynamic($config);
     
+    my $gcodegen = Slic3r::GCode->new;
+    $gcodegen->apply_print_config($print_config);
+    $gcodegen->set_layer_count(10);
     my $buffer = Slic3r::GCode::CoolingBuffer->new(
         config      => $print_config,
-        gcodegen    => Slic3r::GCode->new(print_config => $print_config, layer_count => 10, extruders => []),
+        gcodegen    => $gcodegen,
     );
     return $buffer;
 }
@@ -30,14 +33,14 @@ $config->set('disable_fan_first_layers', 0);
 
 {
     my $buffer = buffer($config);
-    $buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time + 1);
+    $buffer->gcodegen->set_elapsed_time($buffer->config->slowdown_below_layer_time + 1);
     my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0.4) . $buffer->flush;
     like $gcode, qr/F3000/, 'speed is not altered when elapsed time is greater than slowdown threshold';
 }
 
 {
     my $buffer = buffer($config);
-    $buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time - 1);
+    $buffer->gcodegen->set_elapsed_time($buffer->config->slowdown_below_layer_time - 1);
     my $gcode = $buffer->append("G1 X50 F2500\nG1 X100 E1 F3000\nG1 E4 F400", 0, 0, 0.4) . $buffer->flush;
     unlike $gcode, qr/F3000/, 'speed is altered when elapsed time is lower than slowdown threshold';
     like $gcode, qr/F2500/, 'speed is not altered for travel moves';
@@ -46,7 +49,7 @@ $config->set('disable_fan_first_layers', 0);
 
 {
     my $buffer = buffer($config);
-    $buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time + 1);
+    $buffer->gcodegen->set_elapsed_time($buffer->config->fan_below_layer_time + 1);
     my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0.4) . $buffer->flush;
     unlike $gcode, qr/M106/, 'fan is not activated when elapsed time is greater than fan threshold';
 }
@@ -56,7 +59,7 @@ $config->set('disable_fan_first_layers', 0);
     my $gcode = "";
     for my $obj_id (0 .. 1) {
         # use an elapsed time which is < the slowdown threshold but greater than it when summed twice
-        $buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time - 1);
+        $buffer->gcodegen->set_elapsed_time($buffer->config->slowdown_below_layer_time - 1);
         $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, 0, 0.4);
     }
     $gcode .= $buffer->flush;
@@ -69,7 +72,7 @@ $config->set('disable_fan_first_layers', 0);
     for my $layer_id (0 .. 1) {
         for my $obj_id (0 .. 1) {
             # use an elapsed time which is < the threshold but greater than it when summed twice
-            $buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time - 1);
+            $buffer->gcodegen->set_elapsed_time($buffer->config->fan_below_layer_time - 1);
             $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0.4 + 0.4*$layer_id + 0.1*$obj_id); # print same layer at distinct heights
         }
     }
@@ -83,7 +86,7 @@ $config->set('disable_fan_first_layers', 0);
     for my $layer_id (0 .. 1) {
         for my $obj_id (0 .. 1) {
             # use an elapsed time which is < the threshold even when summed twice
-            $buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time/2 - 1);
+            $buffer->gcodegen->set_elapsed_time($buffer->config->fan_below_layer_time/2 - 1);
             $gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0.4 + 0.4*$layer_id + 0.1*$obj_id); # print same layer at distinct heights
         }
     }

t/gcode.t

@@ -13,10 +13,8 @@ use Slic3r::Geometry qw(scale convex_hull);
 use Slic3r::Test;
 
 {
-    my $gcodegen = Slic3r::GCode->new(
+    my $gcodegen = Slic3r::GCode->new();
-        layer_count     => 1,
+    $gcodegen->set_layer_count(1);
-        extruders       => [],
-    );
     $gcodegen->set_origin(Slic3r::Pointf->new(10, 10));
     is_deeply $gcodegen->last_pos->arrayref, [scale -10, scale -10], 'last_pos is shifted correctly';
 }

xs/lib/Slic3r/XS.pm

@@ -215,10 +215,12 @@ for my $class (qw(
         Slic3r::ExtrusionPath
         Slic3r::ExtrusionPath::Collection
         Slic3r::Flow
+        Slic3r::GCode
         Slic3r::GCode::AvoidCrossingPerimeters
         Slic3r::GCode::OozePrevention
         Slic3r::GCode::PlaceholderParser
         Slic3r::GCode::Wipe
+        Slic3r::GCode::Writer
         Slic3r::Geometry::BoundingBox
         Slic3r::Geometry::BoundingBoxf
         Slic3r::Geometry::BoundingBoxf3

xs/src/libslic3r/GCode.cpp

@@ -97,4 +97,15 @@ Wipe::reset_path()
 REGISTER_CLASS(Wipe, "GCode::Wipe");
 #endif
 
+GCode::GCode()
+    : enable_loop_clipping(true), enable_cooling_markers(false), layer_count(0),
+        layer_index(-1), first_layer(false), elapsed_time(0), volumetric_speed(0),
+        last_pos_defined(false)
+{
+}
+
+#ifdef SLIC3RXS
+REGISTER_CLASS(GCode, "GCode");
+#endif
+
 }

xs/src/libslic3r/GCode.hpp

@@ -3,7 +3,13 @@
 
 #include <myinit.h>
 #include "ExPolygon.hpp"
+#include "GCodeWriter.hpp"
+#include "Layer.hpp"
 #include "MotionPlanner.hpp"
+#include "Point.hpp"
+#include "PlaceholderParser.hpp"
+#include "Print.hpp"
+#include "PrintConfig.hpp"
 #include <string>
 
 namespace Slic3r {
@@ -54,6 +60,34 @@ class Wipe {
     //std::string wipe(GCode &gcodegen, bool toolchange = false);
 };
 
+class GCode {
+    public:
+    
+    /* Origin of print coordinates expressed in unscaled G-code coordinates.
+       This affects the input arguments supplied to the extrude*() and travel_to()
+       methods. */
+    Pointf origin;
+    FullPrintConfig config;
+    GCodeWriter writer;
+    PlaceholderParser* placeholder_parser;
+    OozePrevention ooze_prevention;
+    Wipe wipe;
+    AvoidCrossingPerimeters avoid_crossing_perimeters;
+    bool enable_loop_clipping;
+    bool enable_cooling_markers;
+    size_t layer_count;
+    int layer_index; // just a counter
+    Layer* layer;
+    std::map<PrintObject*,Point> _seam_position;
+    bool first_layer; // this flag triggers first layer speeds
+    unsigned int elapsed_time; // seconds
+    Point last_pos;
+    bool last_pos_defined;
+    double volumetric_speed;
+    
+    GCode();
+};
+
 }
 
 #endif

xs/xsp/GCode.xsp

@@ -62,3 +62,89 @@
     void set_path(Polyline* value)
         %code{% THIS->path = *value; %};
 };
+
+%name{Slic3r::GCode} class GCode {
+    GCode();
+    ~GCode();
+    
+    Ref<Pointf> origin()
+        %code{% RETVAL = &(THIS->origin); %};
+    void _set_origin(Pointf* value)
+        %code{% THIS->origin = *value; %};
+    
+    Ref<FullPrintConfig> config()
+        %code{% RETVAL = &(THIS->config); %};
+    
+    Ref<GCodeWriter> writer()
+        %code{% RETVAL = &(THIS->writer); %};
+    
+    Ref<PlaceholderParser> placeholder_parser()
+        %code{% RETVAL = THIS->placeholder_parser; %};
+    void set_placeholder_parser(PlaceholderParser* ptr)
+        %code{% THIS->placeholder_parser = ptr; %};
+    
+    Ref<OozePrevention> ooze_prevention()
+        %code{% RETVAL = &(THIS->ooze_prevention); %};
+    
+    Ref<Wipe> wipe()
+        %code{% RETVAL = &(THIS->wipe); %};
+    
+    Ref<AvoidCrossingPerimeters> avoid_crossing_perimeters()
+        %code{% RETVAL = &(THIS->avoid_crossing_perimeters); %};
+    
+    bool enable_loop_clipping()
+        %code{% RETVAL = THIS->enable_loop_clipping; %};
+    void set_enable_loop_clipping(bool value)
+        %code{% THIS->enable_loop_clipping = value; %};
+    
+    bool enable_cooling_markers()
+        %code{% RETVAL = THIS->enable_cooling_markers; %};
+    void set_enable_cooling_markers(bool value)
+        %code{% THIS->enable_cooling_markers = value; %};
+    
+    int layer_count()
+        %code{% RETVAL = THIS->layer_count; %};
+    void set_layer_count(int value)
+        %code{% THIS->layer_count = value; %};
+    
+    int layer_index()
+        %code{% RETVAL = THIS->layer_index; %};
+    void set_layer_index(int value)
+        %code{% THIS->layer_index = value; %};
+    
+    bool has_layer()
+        %code{% RETVAL = THIS->layer != NULL; %};
+    Ref<Layer> layer()
+        %code{% RETVAL = THIS->layer; %};
+    void set_layer(Layer* ptr)
+        %code{% THIS->layer = ptr; %};
+    
+    bool _has_seam_position(PrintObject* ptr)
+        %code{% RETVAL = THIS->_seam_position.count(ptr) > 0; %};
+    Clone<Point> _seam_position(PrintObject* ptr)
+        %code{% RETVAL = THIS->_seam_position[ptr]; %};
+    void _set_seam_position(PrintObject* ptr, Point* pos)
+        %code{% THIS->_seam_position[ptr] = *pos; %};
+    
+    bool first_layer()
+        %code{% RETVAL = THIS->first_layer; %};
+    void set_first_layer(bool value)
+        %code{% THIS->first_layer = value; %};
+    
+    unsigned int elapsed_time()
+        %code{% RETVAL = THIS->elapsed_time; %};
+    void set_elapsed_time(unsigned int value)
+        %code{% THIS->elapsed_time = value; %};
+    
+    bool last_pos_defined()
+        %code{% RETVAL = THIS->last_pos_defined; %};
+    Ref<Point> last_pos()
+        %code{% RETVAL = &(THIS->last_pos); %};
+    void set_last_pos(Point* value)
+        %code{% THIS->last_pos = *value; THIS->last_pos_defined = true; %};
+    
+    double volumetric_speed()
+        %code{% RETVAL = THIS->volumetric_speed; %};
+    void set_volumetric_speed(double value)
+        %code{% THIS->volumetric_speed = value; %};
+};

xs/xsp/Layer.xsp

@@ -70,6 +70,9 @@
     int ptr()
         %code%{ RETVAL = (int)(intptr_t)THIS; %};
     
+    Ref<SupportLayer> as_support_layer()
+        %code%{ RETVAL = dynamic_cast<SupportLayer*>(THIS); %};
+    
     void make_slices();
     void merge_slices();
     bool any_internal_region_slice_contains_polyline(Polyline* polyline)
@@ -80,7 +83,10 @@
 
 %name{Slic3r::Layer::Support} class SupportLayer {
     // owned by PrintObject, no constructor/destructor
-
+    
+    Ref<Layer> as_layer()
+        %code%{ RETVAL = THIS; %};
+    
     Ref<ExPolygonCollection> support_islands()
         %code%{ RETVAL = &THIS->support_islands; %};
     Ref<ExtrusionEntityCollection> support_fills()

xs/xsp/my.map

@@ -182,6 +182,10 @@ OozePrevention*             O_OBJECT_SLIC3R
 Ref<OozePrevention>         O_OBJECT_SLIC3R_T
 Clone<OozePrevention>       O_OBJECT_SLIC3R_T
 
+GCode*                      O_OBJECT_SLIC3R
+Ref<GCode>                  O_OBJECT_SLIC3R_T
+Clone<GCode>                O_OBJECT_SLIC3R_T
+
 MotionPlanner*             O_OBJECT_SLIC3R
 Ref<MotionPlanner>         O_OBJECT_SLIC3R_T
 Clone<MotionPlanner>       O_OBJECT_SLIC3R_T

xs/xsp/typemap.xspt

@@ -133,6 +133,14 @@
 %typemap{Ref<Wipe>}{simple};
 %typemap{Clone<Wipe>}{simple};
 
+%typemap{OozePrevention*};
+%typemap{Ref<OozePrevention>}{simple};
+%typemap{Clone<OozePrevention>}{simple};
+
+%typemap{GCode*};
+%typemap{Ref<GCode>}{simple};
+%typemap{Clone<GCode>}{simple};
+
 
 %typemap{Points};
 %typemap{Pointfs};