3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Test case for Bugfix: use Lift-z option for 2. extruder #3385

Browse Source 
thanks to
https://github.com/platsch
This commit is contained in:
bubnikv 2016-09-26 12:50:05 +02:00
parent 088b0dab90
commit 8564ac391c
1 changed files with 30 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
t/retraction.t
View File

@ -1,4 +1,4 @@
use Test::More tests => 22;
use Test::More tests => 26;
use strict;
use warnings;
@ -26,6 +26,7 @@ use Slic3r::Test qw(_eq);
my @retracted = (1); # ignore the first travel move from home to first point
my @retracted_length = (0);
my $lifted = 0;
my $lift_dist = 0; # track lifted distance for toolchanges and extruders with different retract_lift values
my $changed_tool = 0;
my $wait_for_toolchange = 0;
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
@ -48,12 +49,14 @@ use Slic3r::Test qw(_eq);
fail 'only lifting while retracted' if !$retracted[$tool];
fail 'double lift' if $lifted;
$lifted = 1;
$lift_dist = $info->{dist_Z};
}
if ($info->{dist_Z} < 0) {
fail 'going down only after lifting' if !$lifted;
fail 'going down by the same amount of the lift or by the amount needed to get to next layer'
if !_eq($info->{dist_Z}, -$print->print->config->get_at('retract_lift', $tool))
&& !_eq($info->{dist_Z}, -$print->print->config->get_at('retract_lift', $tool) + $conf->layer_height);
if !_eq($info->{dist_Z}, -$lift_dist)
&& !_eq($info->{dist_Z}, -lift_dist + $conf->layer_height);
$lift_dist = 0;
$lifted = 0;
}
fail 'move Z at travel speed' if ($args->{F} // $self->F) != $conf->travel_speed * 60;
@ -110,7 +113,7 @@ use Slic3r::Test qw(_eq);
$conf->set('retract_restart_extra', [-1]);
ok $test->($conf), "negative restart extra length$descr";
$conf->set('retract_lift', [1]);
$conf->set('retract_lift', [1, 2]);
ok $test->($conf), "lift$descr";
};
@ -204,7 +207,7 @@ use Slic3r::Test qw(_eq);
{
my $config = Slic3r::Config->new_from_defaults;
$config->set('start_gcode', '');
$config->set('retract_lift', [3]);
$config->set('retract_lift', [3, 4]);
my @lifted_at = ();
my $test = sub {
@ -219,19 +222,36 @@ use Slic3r::Test qw(_eq);
});
};
$config->set('retract_lift_above', [0]);
$config->set('retract_lift_below', [0]);
$config->set('retract_lift_above', [0, 0]);
$config->set('retract_lift_below', [0, 0]);
$test->();
ok !!@lifted_at, 'lift takes place when above/below == 0';
$config->set('retract_lift_above', [5]);
$config->set('retract_lift_below', [15]);
$config->set('retract_lift_above', [5, 6]);
$config->set('retract_lift_below', [15, 13]);
$test->();
ok !!@lifted_at, 'lift takes place when above/below != 0';
ok !(any { $_ < $config->get_at('retract_lift_above', 0) } @lifted_at),
'Z is not lifted below the configured value';
ok !(any { $_ > $config->get_at('retract_lift_below', 0) } @lifted_at),
'Z is not lifted above the configured value';
# check lifting with different values for 2. extruder
$config->set('perimeter_extruder', 2);
$config->set('infill_extruder', 2);
$config->set('retract_lift_above', [0, 0]);
$config->set('retract_lift_below', [0, 0]);
$test->();
ok !!@lifted_at, 'lift takes place when above/below == 0 for 2. extruder';
$config->set('retract_lift_above', [5, 6]);
$config->set('retract_lift_below', [15, 13]);
$test->();
ok !!@lifted_at, 'lift takes place when above/below != 0 for 2. extruder';
ok !(any { $_ < $config->get_at('retract_lift_above', 1) } @lifted_at),
'Z is not lifted below the configured value for 2. extruder';
ok !(any { $_ > $config->get_at('retract_lift_below', 1) } @lifted_at),
'Z is not lifted above the configured value for 2. extruder';
}
__END__
__END__