Sync with PrusaSlicer-settings

resources/profiles/PrusaResearch.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.4.0-rc
+1.4.3 Added new filament profiles and SLA materials.
 1.4.2 Added SLA material profiles.
 1.4.1 Updated firmware version.
 1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.

resources/profiles/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.4.2
+config_version = 1.4.3
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -477,7 +477,7 @@ perimeter_acceleration = 800
 perimeter_speed = 50
 solid_infill_speed = 50
 top_infill_extrusion_width = 0.4
-top_solid_layers = 7
+top_solid_layers = 8
 bridge_flow_ratio = 1
 bridge_speed = 25
 
@@ -1543,6 +1543,7 @@ filament_max_volumetric_speed = 13
 [filament:*ABSMINI*]
 # inherits = *ABS*
 bed_temperature = 100
+first_layer_bed_temperature = 100
 filament_retract_length = 2.7
 filament_retract_speed = nil
 filament_deretract_speed = nil
@@ -2914,6 +2915,7 @@ inherits = *PET*
 filament_vendor = BASF
 filament_cost = 
 filament_density = 1.33
+filament_colour = #F7F7F7
 first_layer_temperature = 220
 first_layer_bed_temperature = 70
 temperature = 215
@@ -2925,7 +2927,7 @@ bridge_fan_speed = 100
 filament_type = PET
 disable_fan_first_layers = 1
 full_fan_speed_layer = 3
-filament_notes = "BASF Forward AM Ultrafuse PET\nMaterial profile version 1.0\n\nMaterial Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion.\n"
+filament_notes = "Material Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
 filament_retract_length = 2
 filament_retract_speed = 40
 filament_retract_before_travel = 2
@@ -2943,7 +2945,7 @@ filament_cost =
 filament_density = 1.25
 filament_spool_weight = 0
 filament_colour = #FFFFFF
-filament_notes = "BASF Forward AM Ultrafuse PLA PRO1\nMaterial profile version 1.0\n\nMaterial Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate.\n"
+filament_notes = "Material Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate."
 filament_retract_length = 2
 filament_retract_lift = 0
 filament_retract_speed = 40
@@ -2969,15 +2971,303 @@ max_fan_speed = 20
 bed_temperature = 100
 disable_fan_first_layers = 3
 filament_colour = #FFFFFF
-filament_notes = "BASF Forward AM Ultrafuse ABS\nMaterial profile version 1.0\n\nMaterial Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion.\n"
+filament_notes = "Material Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
-filament_retract_length = 2
-filament_retract_speed = 40
 filament_retract_before_travel = 2
 filament_wipe = 0
 filament_retract_layer_change = 0
 
 [filament:Ultrafuse ABS @MINI]
 inherits = Ultrafuse ABS; *ABSMINI*
+filament_retract_layer_change = nil
+
+[filament:Ultrafuse ABS Fusion+]
+inherits = Ultrafuse ABS
+filament_density = 1.08
+first_layer_bed_temperature = 105
+temperature = 250
+filament_colour = #FFF8D9
+filament_notes = "Material Description\nABS Fusion+ made with Polyscope XILOY™ 3D is an engineering filament which has been optimized for 3D-printing. This special grade has been developed in collaboration with Polyscope Polymers - renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications. Although ABS has been classified as a standard material in 3D-printing it is known to be quite challenging to process. ABS Fusion+ combines the properties of ABS with an improved processability. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping."
+filament_retract_before_travel = 2
+filament_wipe = nil
+filament_retract_layer_change = 0
+filament_retract_lift = 0
+
+[filament:Ultrafuse ABS Fusion+ @MINI]
+inherits = Ultrafuse ABS Fusion+; *ABSMINI*
+first_layer_bed_temperature = 100
+filament_retract_layer_change = nil
+
+[filament:Ultrafuse ASA]
+inherits = Ultrafuse ABS Fusion+
+filament_density = 1.07
+filament_colour = #FFF4CA
+first_layer_temperature = 275
+temperature = 275
+first_layer_bed_temperature = 110
+bed_temperature = 105
+filament_type = ASA
+min_fan_speed = 25
+max_fan_speed = 50
+bridge_fan_speed = 100
+disable_fan_first_layers = 4
+filament_max_volumetric_speed = 5
+filament_notes = "Material Description\nUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material to 3D-print outdoor fixtures and appliances without losing its properties or color. When also taking into account the high heat resistance and high chemical resistance, this filament is a good choice for many types of applications.\n\nPrinting Recommendations:\nApply Magigoo PC, 3D lac or Dimafix to a clean build plate to improve adhesion."
+
+[filament:Ultrafuse ASA @MINI]
+inherits = Ultrafuse ASA; *ABSMINI*
+filament_type = ASA
+
+[filament:Ultrafuse HIPS]
+inherits = Ultrafuse ABS
+temperature = 250
+filament_density = 1.02
+filament_type = HIPS
+min_fan_speed = 20
+max_fan_speed = 20
+filament_soluble = 1
+filament_notes = "Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."
+
+[filament:Ultrafuse HIPS @MINI]
+inherits = Ultrafuse HIPS; *ABSMINI*
+filament_type = HIPS
+min_fan_speed = 20
+max_fan_speed = 20
+
+[filament:Ultrafuse PA]
+inherits = Fillamentum Nylon FX256
+filament_vendor = BASF
+filament_density = 1.12
+filament_colour = #ECFAFF
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 80
+bed_temperature = 70
+min_fan_speed = 0
+max_fan_speed = 0
+bridge_fan_speed = 0
+fan_below_layer_time = 30
+slowdown_below_layer_time = 20
+min_print_speed = 15
+filament_max_volumetric_speed = 11
+filament_retract_length = 1
+filament_retract_lift = 0
+filament_retract_before_travel = 2
+filament_retract_layer_change = 0
+filament_cost = 0
+filament_spool_weight = 0
+compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
+filament_notes = "Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion."
+
+[filament:Ultrafuse PA6 GF30]
+inherits = Ultrafuse PA
+filament_density = 1.17
+first_layer_temperature = 270
+temperature = 270
+first_layer_bed_temperature = 100
+bed_temperature = 100
+filament_colour = #404040
+fan_always_on = 1
+min_fan_speed = 0
+max_fan_speed = 50
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+full_fan_speed_layer = 3
+slowdown_below_layer_time = 15
+filament_max_volumetric_speed = 10
+filament_retract_length = 1.2
+filament_retract_speed = 40
+filament_deretract_speed = 30
+filament_retract_lift = nil
+filament_wipe = 0
+filament_notes = "Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick  to improve adhesion."
+compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Ultrafuse PAHT-CF15]
+inherits = Ultrafuse PA6 GF30
+filament_density = 1.23
+filament_notes = "Material Description\nPAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle. In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments. PAHT CF15 has high heat resistance up to 130 °C and low moisture absorption.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PAHT-CF can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
+
+[filament:Ultrafuse PC-ABS-FR]
+inherits = Ultrafuse ABS
+filament_colour = #505050
+filament_density = 1.17
+first_layer_temperature = 275
+temperature = 275
+first_layer_bed_temperature = 110
+bed_temperature = 105
+filament_type = PC
+filament_max_volumetric_speed = 8
+filament_wipe = nil
+min_fan_speed = 20
+max_fan_speed = 20
+bridge_fan_speed = 30
+disable_fan_first_layers = 4
+compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+filament_notes = "Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion."
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+
+[filament:Ultrafuse PET-CF15]
+inherits = Ultrafuse PET
+filament_density = 1.36
+filament_colour = #404040
+first_layer_temperature = 270
+temperature = 270
+first_layer_bed_temperature = 75
+bed_temperature = 75
+min_fan_speed = 60
+max_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+full_fan_speed_layer = 3
+slowdown_below_layer_time = 15
+fan_below_layer_time = 30
+filament_max_volumetric_speed = 10
+filament_retract_length = 1.2
+filament_retract_speed = 40
+filament_deretract_speed = 30
+filament_retract_lift = nil
+filament_wipe = 0
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
+filament_notes = "Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
+compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Ultrafuse PLA]
+inherits = *PLA*
+filament_vendor = BASF
+filament_density = 1.25
+full_fan_speed_layer = 3
+filament_notes = "Material Description\nPLA is one of the most used materials for 3D printing. Ultrafuse PLA is available in a wide range of colors. The glossy feel often attracts those who print display models or items for household use. Many appreciate the plant-based origin of this material. When properly cooled, PLA has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes it a popular plastic for home printers, hobbyists, prototyping and schools.\n\nPrinting Recommendations:\nUltrafuse PLA can be printed directly onto a clean build plate."
+
+[filament:Ultrafuse PP]
+inherits = Ultrafuse ABS
+filament_density = 0.91
+filament_colour = #F0F0F0
+first_layer_temperature = 240
+temperature = 240
+first_layer_bed_temperature = 80
+bed_temperature = 70
+min_fan_speed = 100
+max_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+full_fan_speed_layer = 3
+fan_below_layer_time = 60
+slowdown_below_layer_time = 20
+min_print_speed = 10
+filament_type = PP
+filament_max_volumetric_speed = 2.5
+filament_retract_speed = 25
+filament_deretract_speed = 25
+filament_retract_layer_change = 0
+filament_wipe = nil
+filament_notes = "Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion."
+compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Ultrafuse PP-GF30]
+inherits = Ultrafuse PP
+filament_density = 1.07
+filament_colour = #404040
+first_layer_temperature = 260
+temperature = 250
+first_layer_bed_temperature = 90
+bed_temperature = 40
+min_fan_speed = 40
+max_fan_speed = 75
+fan_always_on = 1
+fan_below_layer_time = 30
+slowdown_below_layer_time = 15
+min_print_speed = 15
+filament_retract_length = 1.2
+filament_retract_speed = 40
+filament_deretract_speed = 30
+filament_retract_lift = nil
+filament_wipe = 0
+filament_notes = "Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion."
+compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+
+[filament:Ultrafuse TPC-45D]
+inherits = *FLEX*
+filament_vendor = BASF
+extrusion_multiplier = 1
+filament_density = 1.15
+filament_colour = #0035EC
+first_layer_temperature = 235
+temperature = 235
+first_layer_bed_temperature = 60
+bed_temperature = 60
+min_fan_speed = 10
+max_fan_speed = 50
+bridge_fan_speed = 80
+fan_below_layer_time = 30
+slowdown_below_layer_time = 15
+min_print_speed = 15
+fan_always_on = 1
+cooling = 1
+filament_max_volumetric_speed = 1.2
+filament_retract_length = 1.2
+filament_retract_speed = 25
+filament_deretract_speed = 25
+filament_retract_lift = 0
+filament_wipe = nil
+filament_retract_before_wipe = nil
+filament_retract_before_travel = 2
+filament_retract_layer_change = 0
+filament_notes = "Material Description\nTPC 45D is a flexible, shore 45D, rubber-like Thermoplastic Copolyester Elastomer (TPE-C), which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers do not detach - even with extreme deformation.\n\nPrinting Recommendations:\nApply Magigoo Flex to a clean build plate to improve adhesion."
+
+## [filament:Ultrafuse TPS-90A]
+## inherits = Ultrafuse TPC-45D
+## filament_density = 1.04
+## extrusion_multiplier = 1.02
+## filament_colour = #FFFFFF
+## first_layer_temperature = 270
+## temperature = 265
+## first_layer_bed_temperature = 30
+## bed_temperature = 30
+## min_fan_speed = 20
+## max_fan_speed = 75
+## filament_notes = "Material Description\nUltrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material shows a reduced moisture uptake, which allows for printing without pre-drying. Parts printed with Ultrafuse® TPS 90A show almost no visible layers or warpage, which makes it an excellent material choice for end-use parts. Producing multi-material parts is possible by printing it together with ABS.\n\nPrinting Recommendations:\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
+
+[filament:Ultrafuse TPU-64D]
+inherits = Ultrafuse TPC-45D
+filament_density = 1.16
+first_layer_temperature = 230
+temperature = 225
+first_layer_bed_temperature = 40
+bed_temperature = 40
+min_fan_speed = 20
+max_fan_speed = 100
+filament_notes = "Material Description\nUltrafuse® TPU 64D is the hardest elastomer in BASF Forward AM’s flexible productline. The material shows a relatively high rigidity while maintaining a certain flexibility. This filament is the perfect match for industrial applications requiring rigid parts being resistant to impact, wear and tear. Due to its property profile, the material can be used as an alternative for parts made from ABS and rubbers. Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
+
+[filament:Ultrafuse TPU-85A]
+inherits = Ultrafuse TPU-64D
+filament_density = 1.11
+first_layer_temperature = 225
+temperature = 220
+filament_notes = "Material Description\nUltrafuse® TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse® TPU 85A.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
+
+[filament:Ultrafuse TPU-95A]
+inherits = Ultrafuse TPU-85A
+filament_density = 1.14
+first_layer_temperature = 230
+temperature = 225
+filament_notes = "Material Description\nUltrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."
+
+[filament:Ultrafuse rPET]
+inherits = Ultrafuse PET
+filament_density = 1.27
+filament_colour = #9DC5FF
+first_layer_temperature = 235
+temperature = 235
+first_layer_bed_temperature = 80
+bed_temperature = 75
+min_fan_speed = 50
+max_fan_speed = 100
+fan_below_layer_time = 15
+filament_notes = "Material Description\nPET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics."
+filament_retract_length = 1.2
+filament_retract_lift = 0.6
+filament_wipe = nil
 
 [filament:Ultrafuse Metal]
 inherits = *ABSC*
@@ -4629,7 +4919,7 @@ material_colour = #FF8040
 inherits = *common 0.025*
 exposure_time = 12
 initial_exposure_time = 30
-material_type = Tough
+material_type = Casting
 material_vendor = 3DM
 material_colour = #B0B000
 
@@ -5084,6 +5374,38 @@ material_type = Tough
 material_vendor = Ameralabs
 material_colour = #C0C0C0
 
+[sla_material:PrimaCreator Tough Light Grey @0.025]
+inherits = *common 0.025*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #C0C0C0
+
+[sla_material:PrimaCreator Tough Clear @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
+[sla_material:PrimaCreator Tough White @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #FFFFFF
+
+[sla_material:PrimaCreator Flex Clear @0.025]
+inherits = *common 0.025*
+exposure_time = 4.5
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
 [sla_material:Siraya Tech Simple Clear @0.025]
 inherits = *common 0.025*
 exposure_time = 8
@@ -5371,7 +5693,7 @@ inherits = *common 0.05*
 exposure_time = 12
 initial_exposure_time = 45
 material_type = Tough
-material_vendor = Monocure
+material_vendor = 3DM
 material_colour = #EC0000
 
 [sla_material:Esun Bio-Photopolymer Resin White @0.05]
@@ -5550,6 +5872,38 @@ material_type = Tough
 material_vendor = Photocentric
 material_colour = #C0C0C0
 
+[sla_material:PrimaCreator Tough Light Grey @0.05]
+inherits = *common 0.05*
+exposure_time = 8.5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #C0C0C0
+
+[sla_material:PrimaCreator Tough Clear @0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
+[sla_material:PrimaCreator Tough White @0.05]
+inherits = *common 0.05*
+exposure_time = 7.5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #FFFFFF
+
+[sla_material:PrimaCreator Flex Clear @0.05]
+inherits = *common 0.05*
+exposure_time = 6.5
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
 [sla_material:Siraya Tech Simple Clear @0.05]
 inherits = *common 0.05*
 exposure_time = 10
@@ -6270,6 +6624,38 @@ material_type = Tough
 material_vendor = Made for Prusa
 material_colour = #FF8040
 
+[sla_material:PrimaCreator Tough Light Grey @0.1]
+inherits = *common 0.1*
+exposure_time = 14
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #C0C0C0
+
+[sla_material:PrimaCreator Tough Clear @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
+[sla_material:PrimaCreator Tough White @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = PrimaCreator
+material_colour = #FFFFFF
+
+[sla_material:PrimaCreator Flex Clear @0.1]
+inherits = *common 0.1*
+exposure_time = 12
+initial_exposure_time = 35
+material_type = Flexible
+material_vendor = PrimaCreator
+material_colour = #F8F8F8
+
 ## SL1S materials ##
 
 ## 0.025 SL1S
@@ -6916,6 +7302,310 @@ material_type = Tough
 material_vendor = Peopoly
 material_colour = #F8F8F8
 
+[sla_material:3DM-ABS @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+material_colour = #FF8040
+
+[sla_material:3DM-DENT @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.3
+initial_exposure_time = 36
+material_type = Dental
+material_vendor = 3DM
+material_colour = #FFEEE6
+
+[sla_material:3DM-HR Green @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = 3DM
+material_colour = #00B900
+
+[sla_material:3DM-HR Red Wine @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 6
+initial_exposure_time = 32
+material_type = Tough
+material_vendor = 3DM
+material_colour = #EC0000
+
+[sla_material:3DM-Vulcan Gold @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 24
+material_type = Casting
+material_vendor = 3DM
+material_colour = #B0B000
+
+[sla_material:3DM-XPRO White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = 3DM
+material_colour = #FFFFFF
+
+[sla_material:Asiga Denta Model @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 24
+material_type = Dental
+material_vendor = Asiga
+material_colour = #FFEEE6
+
+[sla_material:Asiga PlasGRAY @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 9.7
+initial_exposure_time = 48
+material_type = Tough
+material_vendor = Asiga
+material_colour = #C0C0C0
+
+[sla_material:BlueCast EcoGray @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = BlueCast
+material_colour = #808080
+
+[sla_material:BlueCast Phrozen Wax @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5.3
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = BlueCast
+material_colour = #007EFD
+
+[sla_material:NextDent Model 2.0 Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4
+initial_exposure_time = 28
+material_type = Dental
+material_vendor = NextDent
+material_colour = #C0C0C0
+
+[sla_material:NextDent Cast Purple @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 16
+material_type = Casting
+material_vendor = NextDent
+material_colour = #E800E8
+
+[sla_material:Siraya Tech Tenacious @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.7
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #F8F8F8
+
+[sla_material:Siraya Tech Blu Clear V2 @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #F8F8F8
+
+[sla_material:Siraya Tech Blu Blue @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #007EFD
+
+[sla_material:Siraya Tech Fast Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #595959
+
+[sla_material:Siraya Tech Fast Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #C0C0C0
+
+[sla_material:Siraya Tech Simple Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #F8F8F8
+
+[sla_material:Siraya Tech Sculpt @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.7
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Siraya Tech
+material_colour = #C0C0C0
+
+[sla_material:Harz Labs Model Resin Cherry @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4.3
+initial_exposure_time = 16
+material_type = Tough
+material_vendor = Harz Labs
+material_colour = #EC0000
+
+[sla_material:Harz Labs Model Resin Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4.3
+initial_exposure_time = 16
+material_type = Tough
+material_vendor = Harz Labs
+material_colour = #595959
+
+[sla_material:Harz Labs Basic Resin Red @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 4.3
+initial_exposure_time = 16
+material_type = Tough
+material_vendor = Harz Labs
+material_colour = #EC0000
+
+[sla_material:Resinworks 3D Violet @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5.7
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Resinworks 3D
+material_colour = #E800E8
+
+[sla_material:FunToDo Industrial Blend Unpigmented @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 1.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = FunToDo
+material_colour = #F8F8F8
+
+[sla_material:FunToDo Snow White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = FunToDo
+material_colour = #FFFFFF
+
+[sla_material:FunToDo Ash Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 32
+material_type = Tough
+material_vendor = FunToDo
+material_colour = #808080
+
+[sla_material:Ameralabs AMD 3 LED @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 1.7
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #808080
+
+[sla_material:Dragon Resin Metalshine Metal Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 10
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Dragon Resin
+material_colour = #808080
+
+[sla_material:Dragon Resin Metalshine Dark Brass @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 10
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Dragon Resin
+material_colour = #B0B000
+
+[sla_material:Dragon Resin Metalshine Brass @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 10
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Dragon Resin
+material_colour = #B0B000
+
+[sla_material:Esun Bio-Photopolymer Resin White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.7
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Esun
+material_colour = #FFFFFF
+
+[sla_material:Esun Standard Resin Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.3
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Esun
+material_colour = #595959
+
+[sla_material:Monocure 3D Black Rapid Resin @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Monocure
+material_colour = #595959
+
+[sla_material:Monocure 3D Blue Rapid Resin @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Monocure
+material_colour = #007EFD
+
+[sla_material:Monocure 3D Clear Rapid Resin @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.7
+initial_exposure_time = 32
+material_type = Tough
+material_vendor = Monocure
+material_colour = #F8F8F8
+
+[sla_material:Monocure 3D Grey Rapid Resin @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Monocure
+material_colour = #C0C0C0
+
+[sla_material:Monocure 3D White Rapid Resin @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3.3
+initial_exposure_time = 28
+material_type = Tough
+material_vendor = Monocure
+material_colour = #FFFFFF
+
+[sla_material:Photocentric Hard Grey @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 24
+material_type = Tough
+material_vendor = Photocentric
+material_colour = #808080
+
 ## 0.1 SL1S
 
 ## Prusa Polymers 0.1