3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer

Browse source
This commit is contained in:
Alessandro Ranellucci 2012-10-14 22:10:49 +02:00
parent 048e58c071
commit 8ac367bfa7
1 changed files with 8 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
lib/Slic3r/Print.pm
View file

@ -421,7 +421,7 @@ sub export_gcode {
# make skirt
$status_cb->(88, "Generating skirt");
$self->make_skirt;
$self->make_brim;
$self->make_brim; # must come after make_skirt
# output everything to a G-code file
my $output_file = $self->expanded_output_filepath($params{output_file});
@ -560,16 +560,14 @@ sub make_skirt {
# draw outlines from outside to inside
my $flow = $Slic3r::first_layer_flow || $Slic3r::flow;
my @skirt = ();
for (my $i = $Slic3r::Config->skirts; $i > 0; $i--) {
my $distance = scale ($Slic3r::Config->skirt_distance + ($flow->spacing * $i));
my $outline = Math::Clipper::offset([$convex_hull], $distance, &Slic3r::SCALING_FACTOR * 100, JT_ROUND);
push @skirt, Slic3r::ExtrusionLoop->pack(
push @{$self->skirt}, Slic3r::ExtrusionLoop->pack(
polygon => Slic3r::Polygon->new(@{$outline->[0]}),
role => EXTR_ROLE_SKIRT,
);
}
unshift @{$self->skirt}, @skirt;
}
sub make_brim {
@ -591,6 +589,11 @@ sub make_brim {
}
}
# if brim touches skirt, make it around skirt too
if ($Slic3r::Config->skirt_distance + (($Slic3r::Config->skirts - 1) * $Slic3r::flow->spacing) <= $Slic3r::Config->brim_width) {
push @islands, map $_->unpack->split_at_first_point->polyline->grow($grow_distance), @{$self->skirt};
}
my $num_loops = sprintf "%.0f", $Slic3r::Config->brim_width / $flow->width;
for my $i (reverse 1 .. $num_loops) {
# JT_SQUARE ensures no vertex is outside the given offset distance
@ -699,7 +702,7 @@ sub write_gcode {
$gcodegen->shift_y($shift[Y]);
$gcode .= $gcodegen->set_acceleration($Slic3r::Config->perimeter_acceleration);
# skip skirt if we have a large brim
if ($layer_id < $Slic3r::Config->skirt_height && ($layer_id != 0 || $Slic3r::Config->skirt_distance + (($Slic3r::Config->skirts - 1) * $Slic3r::flow->spacing) > $Slic3r::Config->brim_width)) {
if ($layer_id < $Slic3r::Config->skirt_height) {
$gcode .= $gcodegen->extrude_loop($_, 'skirt') for @{$self->skirt};
}
$skirt_done++;