diff --git a/doc/How to build - Linux et al.md b/doc/How to build - Linux et al.md index a0dfec089..cf7bc86f2 100644 --- a/doc/How to build - Linux et al.md +++ b/doc/How to build - Linux et al.md @@ -7,7 +7,7 @@ as the versions listed - generally versions available on conservative Linux dist Perl is not required any more. -In a typical situaction, one would open a command line, go to the Slic3r sources, create a directory called `build` or similar, +In a typical situation, one would open a command line, go to the Slic3r sources, create a directory called `build` or similar, `cd` into it and call: cmake .. @@ -19,7 +19,7 @@ Additional CMake flags may be applicable as explained below. ### Dependency resolution -By default Slic3r looks for dependencies the default way CMake looks for them, ie. in default system locations. +By default Slic3r looks for dependencies the default way CMake looks for them, i.e. in default system locations. On Linux this will typically make Slic3r depend on dynamically loaded libraries from the system, however, Slic3r can be told to specifically look for static libraries with the `SLIC3R_STATIC` flag passed to cmake: @@ -65,9 +65,9 @@ To create a debug build, use the following CMake flag: ### Installation -In runtime, Slic3r needs a way to access its resource files. By default, it looks for a `resources` directory relative to its binary. +At runtime, Slic3r needs a way to access its resource files. By default, it looks for a `resources` directory relative to its binary. -If you instead wnat Slic3r installed in a structure according to the Filesystem Hierarchy Standard, use the `SLIC3R_FHS` flag +If you instead want Slic3r installed in a structure according to the File System Hierarchy Standard, use the `SLIC3R_FHS` flag cmake .. -DSLIC3R_FHS=1 diff --git a/doc/How to build - Mac OS.md b/doc/How to build - Mac OS.md index a1c8d9049..670e9fd87 100644 --- a/doc/How to build - Mac OS.md +++ b/doc/How to build - Mac OS.md @@ -18,12 +18,12 @@ This will create a dependencies bundle inside the `build/destdir` directory. You can also customize the bundle output path using the `-DDESTDIR=` option passed to `cmake`. **Warning**: Once the dependency bundle is installed in a destdir, the destdir cannot be moved elsewhere. -(This is because wxWidgets hardcode the installation path.) +(This is because wxWidgets hardcodes the installation path.) ### Building Slic3r -If dependencies built without an error, you can proceed to build Slic3r itself. +If dependencies are built without errors, you can proceed to build Slic3r itself. Go back to top level Slic3r sources directory and use these commands: mkdir build diff --git a/doc/How to build - Windows.md b/doc/How to build - Windows.md index 90fcfde7d..627f1c99b 100644 --- a/doc/How to build - Windows.md +++ b/doc/How to build - Windows.md @@ -7,7 +7,7 @@ CMake installer can be downloaded from [the official website](https://cmake.org/ Building with newer versions of MSVS (2015, 2017) may work too as reported by some of our users. -_Note:_ Thanks to [**@supermerill**](https://github.com/supermerill) for testing and inspiration on this guide. +_Note:_ Thanks to [**@supermerill**](https://github.com/supermerill) for testing and inspiration for this guide. ### Dependencies @@ -20,7 +20,7 @@ The package comes in a several variants: - [32 bit, Release mode only](https://bintray.com/vojtechkral/Slic3r-PE/download_file?file_path=destdir-32.7z) (38 MB, 520 MB unpacked) - [32 bit, Release and Debug mode](https://bintray.com/vojtechkral/Slic3r-PE/download_file?file_path=destdir-32-dev.7z) (74 MB, 1.1 GB unpacked) -When unsure, use the _Release mode only_ variant, the _Release and Debug_ variant is only needed for debugging & developement. +When unsure, use the _Release mode only_ variant, the _Release and Debug_ variant is only needed for debugging & development. If you're unsure where to unpack the package, unpack it into `C:\local\` (but it can really be anywhere). @@ -46,13 +46,13 @@ Conversely, if you're using Visual Studio version other than 2013, the version n If `cmake` has finished without errors, go to the build directory and open the `Slic3r.sln` solution file in Visual Studio. Before building, make sure you're building the right project (use one of those starting with `slic3r_app_...`) and that you're building -with the right configuration, ie. _Release_ vs. _Debug_. When unsure, choose _Release_. +with the right configuration, i.e. _Release_ vs. _Debug_. When unsure, choose _Release_. Note that you won't be able to build a _Debug_ variant against a _Release_-only dependencies package. #### Installing using the `INSTALL` project Slic3r PE can be run from the Visual Studio or from Visual Studio's build directory (`src\Release` or `src\Debug`), -but for longer-term usage you migth want to install somewhere using the `INSTALL` project. +but for longer-term usage you might want to install somewhere using the `INSTALL` project. By default, this installs into `C:\Program Files\Slic3r`. To customize the install path, use the `-DCMAKE_INSTALL_PREFIX=` when invoking `cmake`. @@ -91,7 +91,7 @@ You can also use the Visual Studio GUI or other generators as mentioned above. The `DESTDIR` option is the location where the bundle will be installed. This may be customized. If you leave it empty, the `DESTDIR` will be places inside the same `build` directory. -Note that the build variant that you may choose using Visual Studio (ie. _Release_ or _Debug_ etc.) when building the dependency package is **not relevant**. +Note that the build variant that you may choose using Visual Studio (i.e. _Release_ or _Debug_ etc.) when building the dependency package is **not relevant**. The dependency build will by default build _both_ the _Release_ and _Debug_ variants regardless of what you choose in Visual Studio. You can disable building of the debug variant by passing the `-DDEP_DEBUG=OFF` option to CMake, this will only produce a _Release_ build. diff --git a/doc/Localization_guide.md b/doc/Localization_guide.md index 33fcc1c08..656f225ef 100644 --- a/doc/Localization_guide.md +++ b/doc/Localization_guide.md @@ -2,20 +2,20 @@ The purpose of this guide is to describe how to contribute to the Slic3rPE translations. We use GNUgettext for extracting string resources from the project and PoEdit for editing translations. -Those are possible to download here: +Those can be downloaded here: - https://sourceforge.net/directory/os:windows/?q=gnu+gettext GNUgettext package contains a set of tools to extract strings from the source code and to create the translation Catalog. - https://poedit.net PoEdit provides good interface for the translators. -After GNUgettext is installed it is recommended to add the path to gettext/bin to PATH variable. +After GNUgettext is installed, it is recommended to add the path to gettext/bin to PATH variable. -Full manual for GNUgettext you can see here: http://www.gnu.org/software/gettext/manual/gettext.html +Full manual for GNUgettext can be seen here: http://www.gnu.org/software/gettext/manual/gettext.html -### Scenario 1. How do I add a translation or fix the existing translation +### Scenario 1. How do I add a translation or fix an existing translation 1. Get PO-file from corresponding folder here: https://github.com/prusa3d/Slic3r/tree/master/resources/localization 2. Open this file in PoEdit as "Edit a translation" -3. Apply your corrections to translation +3. Apply your corrections to the translation 4. Push changed Slic3rPE.po and Slic3rPE.mo (will create automatically after saving of Slic3r.po in PoEdit) back to to the enter folder. ### Scenario 2. How do I add a new language support @@ -23,10 +23,10 @@ https://github.com/prusa3d/Slic3r/tree/master/resources/localization https://github.com/prusa3d/Slic3r/tree/master/resources/localization 2. Open it in PoEdit for "Create new translation" 3. Select Translation Language (for example French). -4. As a result you will have fr.po - the file contaning translation to French. -Notice. When the transtation is complete you need to: +4. As a result you will have fr.po - the file containing translation to French. +Notice. When the translation is complete you need to: - Rename the file to Slic3rPE.po - - Click "Save file" button. Slic3rPE.mo will be created immediatly + - Click "Save file" button. Slic3rPE.mo will be created immediately - Both Slic3rPE.po and Slic3rPE.mo have to be saved here: https://github.com/prusa3d/Slic3r/tree/master/resources/localization/fr ( name of folder "fr" means "French" - the translation language). @@ -37,11 +37,11 @@ Each string resource in Slic3rPE available for translation needs to be explicitl auto msg = L("This message to be localized") ``` To get translated text use one of needed macro/function (`_(s)`, `_CHB(s)` or `L_str(s)` ). -If you add new file resourse, add it to list of files contaned macro `L()` +If you add new file resource, add it to the list of files containing macro `L()` ### Scenario 4. How do I use GNUgettext to localize my own application taking Slic3rPE as an example -1. For conviniance create list of files with this macro `L(s)`. We have +1. For convenience create a list of files with this macro `L(s)`. We have https://github.com/prusa3d/Slic3r/tree/master/resources/localization/list.txt. 2. Create template file(*.POT) with GNUgettext command: @@ -50,11 +50,11 @@ https://github.com/prusa3d/Slic3r/tree/master/resources/localization/list.txt. ``` Use flag `--from-code=UTF-8` to specify that the source strings are in UTF-8 encoding - Use flag `--debug` to correctly extract formated strings(used %d, %s etc.) + Use flag `--debug` to correctly extract formatted strings(used %d, %s etc.) 3. Create PO- and MO-files for your project as described above. -4. To merge old PO-file with strings from creaded new POT-file use command: +4. To merge old PO-file with strings from created new POT-file use command: ``` msgmerge -N -o new.po old.po new.pot ``` @@ -71,6 +71,6 @@ https://github.com/prusa3d/Slic3r/tree/master/resources/localization/list.txt. ``` Notice, in this Catalog it will be totally same strings for initial text and translated. -When you have Catalog to translation open POT or PO file in PoEdit and start to translation. -It's very important to keep attention to every gaps and punctuation. Especially with -formated strings. (used %d, %s etc.) \ No newline at end of file +When you have Catalog to translation open POT or PO file in PoEdit and start to translation, +it's very important to keep attention to every gaps and punctuation. Especially with +formatted strings. (using %d, %s, etc.) \ No newline at end of file diff --git a/doc/updating/Updatig.md b/doc/updating/Updating.md similarity index 79% rename from doc/updating/Updatig.md rename to doc/updating/Updating.md index 13a2de144..12727fb15 100644 --- a/doc/updating/Updatig.md +++ b/doc/updating/Updating.md @@ -12,7 +12,7 @@ There are three new features: - _System preset_: These are the presets that come with Slic3r PE installation. They come from a vendor configuration bundle (not individual files like before). They are **read-only** – a user cannot modify them, but may instead create a derived User preset based on a System preset - _User preset_: These are regular presets stored in files just like before. Additionally, they may be derived (inherited) from one of the System presets -A derived User preset keeps track of wich settings are inherited from the parent System preset and which are modified by the user. When a system preset is updated (either via installation of a new Slic3r or automatically from the internet), in a User preset the settings that are modified by the user will stay that way, while the ones that are inherited reflect the updated System preset. +A derived User preset keeps track of which settings are inherited from the parent System preset and which are modified by the user. When a system preset is updated (either via installation of a new Slic3r or automatically from the internet), in a User preset the settings that are modified by the user will stay that way, while the ones that are inherited reflect the updated System preset. This system ensures that we don't overwrite user's settings when there is an update to the built in presets. @@ -25,9 +25,9 @@ A settings modified in a User preset has an open lock icon: ![a user setting](setting_user.png) -Clickign the open lock icon restored the system setting. +Clicking the open lock icon restores the system setting. -Additionaly, any setting that is modified but not yet saved onto disk is represented by orange label and a back-arrow: +Additionally, any setting that is modified but not yet saved onto disk is represented by orange label and a back-arrow: ![a modified setting](setting_mod.png) diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index 407883544..a6f9deb28 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,14 +1,22 @@ min_slic3r_version = 1.42.0-alpha6 -0.8.0-alpha7 -0.8.0-alpha6 +0.8.0-beta Updated SLA profiles +0.8.0-alpha9 Updated SLA and FFF profiles +0.8.0-alpha8 Updated SLA profiles +0.8.0-alpha7 Updated SLA profiles +0.8.0-alpha6 Updated SLA profiles min_slic3r_version = 1.42.0-alpha -0.8.0-alpha +0.8.0-alpha Updated SLA profiles 0.4.0-alpha4 Updated SLA profiles 0.4.0-alpha3 Update of SLA profiles 0.4.0-alpha2 First SLA profiles min_slic3r_version = 1.41.3-alpha +0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.1 New MK2.5S and MK3S FW versions 0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt min_slic3r_version = 1.41.1 +0.3.5 New MK2.5 and MK3 FW versions 0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 0.3.3 Prusament PETG released 0.3.2 New MK2.5 and MK3 FW versions @@ -41,6 +49,7 @@ min_slic3r_version = 1.41.0-alpha 0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0 0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters min_slic3r_version = 1.40.0 +0.1.13 New MK2.5 and MK3 FW versions 0.1.12 New MK2.5 and MK3 FW versions 0.1.11 fw version changed to 3.3.1 0.1.10 MK3 jerk and acceleration update diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index a471700fb..35916377b 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the Slic3r configuration to be downgraded. -config_version = 0.8.0-alpha7 +config_version = 0.8.0-beta # Where to get the updates from? config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/ @@ -190,6 +190,14 @@ travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 +[print:*MK306*] +fill_pattern = gyroid +fill_density = 15% +single_extruder_multi_material_priming = 0 +travel_speed = 180 +wipe_tower_x = 170 +wipe_tower_y = 125 + # Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] external_perimeter_extrusion_width = 0.25 @@ -205,6 +213,38 @@ support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% +[print:*0.25nozzleMK3*] +external_perimeter_extrusion_width = 0.25 +extrusion_width = 0.25 +first_layer_extrusion_width = 0.35 +infill_extrusion_width = 0.25 +perimeter_extrusion_width = 0.25 +solid_infill_extrusion_width = 0.25 +top_infill_extrusion_width = 0.25 +support_material_extrusion_width = 0.2 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_spacing = 1 +support_material_xy_spacing = 150% +perimeter_speed = 30 +external_perimeter_speed = 20 +small_perimeter_speed = 20 +infill_speed = 45 +solid_infill_speed = 45 +top_solid_infill_speed = 30 +support_material_speed = 40 +bridge_speed = 20 +gap_fill_speed = 30 +perimeter_acceleration = 500 +infill_acceleration = 1000 +bridge_acceleration = 500 +first_layer_acceleration = 500 +default_acceleration = 1000 +max_print_speed = 80 +perimeters = 3 +fill_pattern = grid +fill_density = 20% + # Print parameters common to a 0.6mm diameter nozzle. [print:*0.6nozzle*] external_perimeter_extrusion_width = 0.61 @@ -216,6 +256,18 @@ solid_infill_extrusion_width = 0.65 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 +[print:*0.6nozzleMK3*] +external_perimeter_extrusion_width = 0.65 +extrusion_width = 0.65 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.7 +perimeter_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.7 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.55 +bridge_flow_ratio = 0.95 +bridge_speed = 25 + [print:*soluble_support*] overhangs = 1 skirts = 0 @@ -288,6 +340,9 @@ support_material_speed = 20 [print:0.05mm ULTRADETAIL 0.25 nozzle MK3] inherits = *0.05mm*; *0.25nozzle*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +fill_pattern = grid +fill_density = 20% +first_layer_extrusion_width = 0.35 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.07mm ---XXX @@ -326,6 +381,17 @@ fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 +[print:0.07mm ULTRADETAIL 0.25 nozzle MK3] +inherits = *0.07mm*; *0.25nozzle*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +infill_speed = 30 +solid_infill_speed = 30 +support_material_speed = 30 +top_solid_infill_speed = 20 +fill_pattern = grid +fill_density = 20% +first_layer_extrusion_width = 0.35 + # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.10mm ---XXX # XXXXXXXXXXXXXXXXXXXX @@ -382,29 +448,10 @@ top_solid_infill_speed = 30 # MK3 # [print:0.10mm DETAIL 0.25 nozzle MK3] -inherits = *0.10mm*; *0.25nozzle*; *MK3* -bridge_speed = 30 +inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 -external_perimeter_speed = 35 -infill_acceleration = 1250 -infill_speed = 200 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 200 -top_solid_infill_speed = 50 - -# MK3 # -[print:0.10mm DETAIL 0.6 nozzle MK3] -inherits = *0.10mm*; *0.6nozzle*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1250 -infill_speed = 200 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 200 -top_solid_infill_speed = 50 +fill_pattern = grid +fill_density = 20% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.15mm ---XXX @@ -531,17 +578,27 @@ support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # -[print:0.15mm OPTIMAL 0.25 nozzle MK3] -inherits = *0.15mm*; *0.25nozzle*; *MK3* -bridge_speed = 30 +[print:0.15mm QUALITY 0.25 nozzle MK3] +inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% + +# MK3 # +[print:0.15mm DETAIL 0.6 nozzle MK3] +inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 -infill_speed = 200 -max_print_speed = 200 +infill_speed = 70 +max_print_speed = 100 perimeter_speed = 45 -solid_infill_speed = 200 -top_solid_infill_speed = 50 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.20mm ---XXX +# XXXXXXXXXXXXXXXXXXXX [print:*0.20mm*] inherits = *common* @@ -557,23 +614,6 @@ solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 5 -# MK3 # -[print:0.15mm OPTIMAL 0.6 nozzle MK3] -inherits = *0.15mm*; *0.6nozzle*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1250 -infill_speed = 200 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 200 -top_solid_infill_speed = 50 - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.20mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - # MK2 # [print:0.20mm 100mms Linear Advance] inherits = *0.20mm* @@ -664,17 +704,68 @@ support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # -[print:0.20mm FAST 0.6 nozzle MK3] -inherits = *0.20mm*; *0.6nozzle*; *MK3* -bridge_speed = 30 +[print:0.20mm DETAIL 0.6 nozzle MK3] +inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 -infill_speed = 200 -max_print_speed = 200 +infill_speed = 70 +max_print_speed = 100 perimeter_speed = 45 -solid_infill_speed = 200 -top_solid_infill_speed = 50 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.30mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.30mm*] +inherits = *common* +bottom_solid_layers = 4 +bridge_flow_ratio = 0.95 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.3 +perimeter_acceleration = 800 +perimeter_speed = 50 +solid_infill_speed = 50 +top_infill_extrusion_width = 0.4 +top_solid_layers = 4 + +[print:0.30mm QUALITY 0.6 nozzle MK3] +inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1250 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 + +[print:0.30mm DRAFT MK3] +inherits = *0.30mm*; *MK3* +bottom_solid_layers = 3 +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1250 +infill_speed = 85 +max_print_speed = 200 +perimeter_speed = 50 +small_perimeter_speed = 30 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 45 +external_perimeter_extrusion_width = 0.6 +extrusion_width = 0.5 +first_layer_extrusion_width = 0.42 +infill_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 +support_material_extrusion_width = 0.35 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.35mm ---XXX @@ -732,6 +823,57 @@ support_material_interface_layers = 2 support_material_with_sheath = 0 support_material_xy_spacing = 150% +# MK3 # +[print:0.35mm SPEED 0.6 nozzle MK3] +inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1250 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 + +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.40mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + +[print:*0.40mm*] +inherits = *common* +bottom_solid_layers = 3 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +first_layer_extrusion_width = 0.65 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.4 +perimeter_acceleration = 800 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +top_solid_infill_speed = 40 +top_solid_layers = 4 + +# MK3 # +[print:0.40mm DRAFT 0.6 nozzle MK3] +inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1250 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.7 +perimeter_extrusion_width = 0.7 +infill_extrusion_width = 0.72 +solid_infill_extrusion_width = 0.72 + # XXXXXXXXXXXXXXXXXXXXXX # XXX----- MK2.5 ----XXX # XXXXXXXXXXXXXXXXXXXXXX @@ -827,7 +969,7 @@ filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode" [filament:*PLA*] inherits = *common* @@ -844,6 +986,7 @@ first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 temperature = 210 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode" [filament:*PET*] inherits = *common* @@ -859,9 +1002,14 @@ first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode" temperature = 240 +[filament:*PET06*] +inherits = *PET* +compatible_printers_condition = nozzle_diameter[0]==0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +filament_max_volumetric_speed = 15 + [filament:*ABS*] inherits = *common* bed_temperature = 110 @@ -879,6 +1027,7 @@ first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode" [filament:*FLEX*] inherits = *common* @@ -906,10 +1055,11 @@ inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 -filament_cost = 80.65 -filament_density = 4 +filament_cost = 56.64 +filament_density = 3.9 filament_colour = #804040 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 9 +filament_notes = "List of materials tested with standard print settings:\n\nColorFabb bronzeFill\nColorFabb brassFill\nColorFabb steelFill\nColorFabb copperFill" [filament:ColorFabb HT] inherits = *PET* @@ -933,19 +1083,31 @@ inherits = *PLA* filament_cost = 55.5 filament_density = 1.24 -[filament:ColorFabb Woodfil] +[filament:ColorFabb woodFill] inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 62.9 filament_density = 1.15 -filament_colour = #804040 +filament_colour = #dfc287 filament_max_volumetric_speed = 10 first_layer_temperature = 200 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 +[filament:ColorFabb corkFill] +inherits = *PLA* +compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +extrusion_multiplier = 1.2 +filament_cost = 45.45 +filament_density = 1.18 +filament_colour = #634d33 +filament_max_volumetric_speed = 6 +first_layer_temperature = 220 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 220 + [filament:ColorFabb XT] inherits = *PET* filament_type = PET @@ -1001,7 +1163,7 @@ temperature = 260 inherits = *PET* filament_cost = 56.9 filament_density = 1.26 -filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" +filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" [filament:E3D PC-ABS] inherits = *ABS* @@ -1036,7 +1198,7 @@ max_fan_speed = 50 min_fan_speed = 50 temperature = 275 -[filament:Fillamentum Timberfil] +[filament:Fillamentum Timberfill] inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) @@ -1053,19 +1215,19 @@ temperature = 190 inherits = *ABS* filament_cost = 27.82 filament_density = 1.04 -filament_notes = "List of materials tested with standart ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" +filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" [filament:Generic PET] inherits = *PET* filament_cost = 27.82 filament_density = 1.27 -filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" +filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" [filament:Generic PLA] inherits = *PLA* filament_cost = 25.4 filament_density = 1.24 -filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" [filament:Polymaker PC-Max] inherits = *ABS* @@ -1084,11 +1246,11 @@ filament_density = 1.23 cooling = 0 fan_always_on = 0 filament_colour = #FFFFD7 -filament_max_volumetric_speed = 10 -filament_notes = "List of materials tested with standart PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" +filament_max_volumetric_speed = 4 +filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'" filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_soluble = 1 -filament_type = PVA +filament_type = PLA first_layer_temperature = 195 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 195 @@ -1097,7 +1259,7 @@ temperature = 195 inherits = *ABS* filament_cost = 27.82 filament_density = 1.08 -filament_notes = "List of materials tested with standart ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" +filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" [filament:*ABS MMU2*] inherits = Prusa ABS @@ -1140,7 +1302,8 @@ temperature = 220 inherits = *PET* filament_cost = 27.82 filament_density = 1.27 -filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" +filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" +compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG] inherits = *PET* @@ -1148,6 +1311,20 @@ first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 +compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) + +[filament:Prusa PET 0.6 nozzle] +inherits = *PET06* +filament_cost = 27.82 +filament_density = 1.27 +filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" + +[filament:Prusament PETG 0.6 nozzle] +inherits = *PET06* +first_layer_temperature = 240 +temperature = 250 +filament_cost = 24.99 +filament_density = 1.27 [filament:*PET MMU2*] inherits = Prusa PET @@ -1179,7 +1356,7 @@ inherits = *PET MMU2* inherits = *PLA* filament_cost = 25.4 filament_density = 1.24 -filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" [filament:Prusament PLA] inherits = *PLA* @@ -1265,7 +1442,7 @@ fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_max_volumetric_speed = 4 -filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_notes = "List of materials tested with standard PVA print settings:\n\nVerbatim BVOH" filament_soluble = 1 filament_type = PLA first_layer_bed_temperature = 60 @@ -1279,7 +1456,6 @@ temperature = 210 inherits = Verbatim BVOH compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 -filament_notes = BVOH fan_always_on = 1 first_layer_temperature = 200 filament_cooling_final_speed = 1 @@ -1316,7 +1492,7 @@ filament_loading_speed = 14 filament_loading_speed_start = 19 filament_max_volumetric_speed = 4 filament_minimal_purge_on_wipe_tower = 5 -filament_notes = PVA +filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+" filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_toolchange_delay = 0 @@ -1346,7 +1522,7 @@ fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 -filament_notes = "List of materials tested with standart PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" +filament_notes = "List of materials tested with standard PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" filament_type = PLA first_layer_bed_temperature = 100 first_layer_temperature = 220 @@ -1358,14 +1534,15 @@ temperature = 220 [sla_print:*common*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ layer_height = 0.05 -output_filename_format = [input_filename_base].dwz +output_filename_format = [input_filename_base].sl1 pad_edge_radius = 0.5 pad_enable = 1 pad_max_merge_distance = 50 -pad_wall_height = 3 +pad_wall_height = 0 pad_wall_thickness = 1 +pad_wall_slope = 90 support_base_diameter = 3 -support_base_height = 0.5 +support_base_height = 1 support_critical_angle = 45 support_density_at_45 = 250 support_density_at_horizontal = 500 @@ -1376,6 +1553,7 @@ support_max_bridge_length = 10 support_minimal_z = 0 support_object_elevation = 5 support_pillar_diameter = 1 +support_pillar_connection_mode = zigzag support_pillar_widening_factor = 0 supports_enable = 1 @@ -1441,6 +1619,11 @@ inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 +[sla_material:SL1 Orange solid 0.025] +inherits = *common 0.025* +exposure_time = 5 +initial_exposure_time = 35 + ########### Materials 0.05 [sla_material:3DM-HTR140 (high temperature) 0.05] @@ -1458,11 +1641,31 @@ inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 45 +[sla_material:Bluecast Keramaster Dental 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 45 + +[sla_material:Bluecast LCD-DLP Original 0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 60 + [sla_material:Bluecast Phrozen Wax 0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 55 +[sla_material:Bluecast S+ 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 45 + +[sla_material:Bluecast X2 0.05] +inherits = *common 0.05* +exposure_time = 10 +initial_exposure_time = 60 + [sla_material:Jamg He PJHC-00 Yellow 0.05] inherits = *common 0.05* exposure_time = 7 @@ -1475,7 +1678,7 @@ initial_exposure_time = 45 [sla_material:Jamg He PJHC-30 Orange 0.05] inherits = *common 0.05* -exposure_time = 7 +exposure_time = 7.5 initial_exposure_time = 45 [sla_material:Jamg He PJHC-60 Gray 0.05] @@ -1513,8 +1716,6 @@ inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 -# v2 - [sla_material:3DM-ABS 0.05] inherits = *common 0.05* exposure_time = 9 @@ -1560,11 +1761,101 @@ inherits = *common 0.05* exposure_time = 6.5 initial_exposure_time = 40 +[sla_material:Harz Labs Model Resin Cherry 0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 45 + +[sla_material:Jamg He CRX-70C High Tenacity Black 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 40 + +[sla_material:Jamg He MC-2000 Casting Green 0.05] +inherits = *common 0.05* +exposure_time = 13 +initial_exposure_time = 40 + +[sla_material:Jamg He PJHC-00 Solid Yellow 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 40 + +[sla_material:Jamg He PJHC-20 White 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 45 + +[sla_material:Jamg He PJHC-80 Transparent Green 0.05] +inherits = *common 0.05* +exposure_time = 8 +initial_exposure_time = 45 + +[sla_material:Jamg He PJHC-80 Transparent Red 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 45 + +[sla_material:Jamg He PJHC-81 Solid Maroon 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 45 + +[sla_material:Jamg He PJHC-90 Solid Pink 0.05] +inherits = *common 0.05* +exposure_time = 7 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-00 Yellow Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-10 Clear Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-20 White Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-50 Blue Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-70 Black Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:Jamg He RJHC-81 Red Flexible 0.05] +inherits = *common 0.05* +exposure_time = 9 +initial_exposure_time = 40 + +[sla_material:SL1 Orange solid 0.05] +inherits = *common 0.05* +exposure_time = 7.5 +initial_exposure_time = 45 + +[sla_material:SL1 Red transparent 0.05] +inherits = *common 0.05* +exposure_time = 7.5 +initial_exposure_time = 45 + ########### Materials 0.035 [sla_material:Jamg He PJHC-30 Orange 0.035] inherits = *common 0.035* -exposure_time = 9 +exposure_time = 6 +initial_exposure_time = 35 + +[sla_material:SL1 Orange solid 0.035] +inherits = *common 0.035* +exposure_time = 6 initial_exposure_time = 35 ########### Materials 0.1 @@ -1574,6 +1865,11 @@ inherits = *common 0.1* exposure_time = 10 initial_exposure_time = 45 +[sla_material:SL1 Orange solid 0.1] +inherits = *common 0.1* +exposure_time = 10 +initial_exposure_time = 45 + [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 @@ -1740,19 +2036,19 @@ min_layer_height = 0.1 inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 -start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 -start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 -start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = Original Prusa i3 MK2.5; *mm2* @@ -1781,7 +2077,7 @@ machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2] @@ -1815,20 +2111,23 @@ single_extruder_multi_material = 1 # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S MMU2S Single] inherits = Original Prusa i3 MK2.5; *mm2s* @@ -1857,7 +2156,7 @@ machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S] @@ -1891,7 +2190,7 @@ single_extruder_multi_material = 1 # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n @@ -1923,7 +2222,7 @@ remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 -start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY MK3 @@ -1933,27 +2232,31 @@ nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.6 -max_layer_height = 0.35 -min_layer_height = 0.1 +max_layer_height = 0.40 +min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 [printer:Original Prusa i3 MK3S] inherits = Original Prusa i3 MK3 printer_model = MK3S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle printer_model = MK3S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle printer_model = MK3S +start_gcode = M115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:*mm2*] inherits = Original Prusa i3 MK3 @@ -1983,7 +2286,7 @@ default_filament_profile = Prusament PLA MMU2 inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2] @@ -1994,14 +2297,14 @@ inherits = *mm2* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S MMU2S Single] inherits = *mm2s* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3S MMU2S] @@ -2009,14 +2312,14 @@ inherits = *mm2s* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n +start_gcode = M107\nM115 U3.6.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1 printer_variant = default -default_sla_material_profile = Jamg He Transparent Green 0.05 +default_sla_material_profile = Jamg He PJHC-30 Orange 0.05 default_sla_print_profile = 0.05 Normal bed_shape = 0.98x1.02,119.98x1.02,119.98x68.02,0.98x68.02 display_height = 68.04 diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index b38ae3665..aae3436ae 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -88,9 +88,9 @@ configure_file(${CMAKE_CURRENT_SOURCE_DIR}/platform/msw/slic3r.rc.in ${CMAKE_CUR configure_file(${CMAKE_CURRENT_SOURCE_DIR}/platform/msw/slic3r.manifest.in ${CMAKE_CURRENT_BINARY_DIR}/slic3r.manifest @ONLY) configure_file(${CMAKE_CURRENT_SOURCE_DIR}/platform/osx/Info.plist.in ${CMAKE_CURRENT_BINARY_DIR}/Info.plist @ONLY) if (MSVC) - add_library(slic3r SHARED slic3r.cpp) + add_library(slic3r SHARED slic3r.cpp slic3r.hpp) else () - add_executable(slic3r slic3r.cpp) + add_executable(slic3r slic3r.cpp slic3r.hpp) endif () if (NOT MSVC) if(SLIC3R_GUI) @@ -153,19 +153,14 @@ endif () # Also the shim may load the Mesa software OpenGL renderer if the default renderer does not support OpenGL 2.0 and higher. if (MSVC) add_executable(slic3r_app_gui WIN32 slic3r_app_msvc.cpp ${CMAKE_CURRENT_BINARY_DIR}/slic3r.rc) - target_compile_definitions(slic3r_app_gui PRIVATE -DSLIC3R_WRAPPER_NOCONSOLE -DSLIC3R_WRAPPER_GUI) + target_compile_definitions(slic3r_app_gui PRIVATE -DSLIC3R_WRAPPER_NOCONSOLE) add_dependencies(slic3r_app_gui slic3r) set_target_properties(slic3r_app_gui PROPERTIES OUTPUT_NAME "slic3r") add_executable(slic3r_app_console slic3r_app_msvc.cpp ${CMAKE_CURRENT_BINARY_DIR}/slic3r.rc) - target_compile_definitions(slic3r_app_console PRIVATE -DSLIC3R_WRAPPER_CONSOLE -DSLIC3R_WRAPPER_NOGUI) + target_compile_definitions(slic3r_app_console PRIVATE -DSLIC3R_WRAPPER_CONSOLE) add_dependencies(slic3r_app_console slic3r) set_target_properties(slic3r_app_console PROPERTIES OUTPUT_NAME "slic3r-console") - - add_executable(slic3r_app_noconsole WIN32 slic3r_app_msvc.cpp ${CMAKE_CURRENT_BINARY_DIR}/slic3r.rc) - target_compile_definitions(slic3r_app_noconsole PRIVATE -DSLIC3R_WRAPPER_NOCONSOLE -DSLIC3R_WRAPPER_NOGUI) - add_dependencies(slic3r_app_noconsole slic3r) - set_target_properties(slic3r_app_noconsole PROPERTIES OUTPUT_NAME "slic3r-noconsole") endif () # Link the resources dir to where Slic3r GUI expects it @@ -213,7 +208,6 @@ if (WIN32) if (MSVC) install(TARGETS slic3r_app_gui RUNTIME DESTINATION "${CMAKE_INSTALL_PREFIX}") install(TARGETS slic3r_app_console RUNTIME DESTINATION "${CMAKE_INSTALL_PREFIX}") - install(TARGETS slic3r_app_noconsole RUNTIME DESTINATION "${CMAKE_INSTALL_PREFIX}") endif () else () install(TARGETS slic3r RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}") diff --git a/src/admesh/connect.cpp b/src/admesh/connect.cpp index 166eec330..5fc992b63 100644 --- a/src/admesh/connect.cpp +++ b/src/admesh/connect.cpp @@ -293,8 +293,8 @@ static int stl_load_edge_nearby(stl_file *stl, stl_hash_edge *edge, stl_vertex * { // Index of a grid cell spaced by tolerance. typedef Eigen::Matrix Vec3i; - Vec3i vertex1 = (*a / tolerance).cast(); - Vec3i vertex2 = (*b / tolerance).cast(); + Vec3i vertex1 = ((*a - stl->stats.min) / tolerance).cast(); + Vec3i vertex2 = ((*b - stl->stats.min) / tolerance).cast(); static_assert(sizeof(Vec3i) == 12, "size of Vec3i incorrect"); if (vertex1 == vertex2) diff --git a/src/admesh/shared.cpp b/src/admesh/shared.cpp index 91bb82e00..c8c17ccd5 100644 --- a/src/admesh/shared.cpp +++ b/src/admesh/shared.cpp @@ -143,7 +143,7 @@ stl_generate_shared_vertices(stl_file *stl) { } void -stl_write_off(stl_file *stl, char *file) { +stl_write_off(stl_file *stl, const char *file) { int i; FILE *fp; char *error_msg; @@ -179,7 +179,7 @@ stl_write_off(stl_file *stl, char *file) { } void -stl_write_vrml(stl_file *stl, char *file) { +stl_write_vrml(stl_file *stl, const char *file) { int i; FILE *fp; char *error_msg; @@ -236,7 +236,7 @@ stl_write_vrml(stl_file *stl, char *file) { fclose(fp); } -void stl_write_obj (stl_file *stl, char *file) { +void stl_write_obj (stl_file *stl, const char *file) { int i; FILE* fp; diff --git a/src/admesh/stl.h b/src/admesh/stl.h index 9c71f00f6..afff3deac 100644 --- a/src/admesh/stl.h +++ b/src/admesh/stl.h @@ -177,10 +177,10 @@ extern void stl_transform(stl_file *stl, const Eigen::Transformvertex[1] - facet->vertex[0]).cross(facet->vertex[2] - facet->vertex[0]); } diff --git a/src/admesh/stl_io.cpp b/src/admesh/stl_io.cpp index 81e29d286..71e434cbc 100644 --- a/src/admesh/stl_io.cpp +++ b/src/admesh/stl_io.cpp @@ -365,7 +365,7 @@ stl_write_quad_object(stl_file *stl, char *file) { } void -stl_write_dxf(stl_file *stl, char *file, char *label) { +stl_write_dxf(stl_file *stl, const char *file, char *label) { int i; FILE *fp; char *error_msg; diff --git a/src/libnest2d/include/libnest2d/optimizers/nlopt/genetic.hpp b/src/libnest2d/include/libnest2d/optimizers/nlopt/genetic.hpp index 731ead554..b92251ebd 100644 --- a/src/libnest2d/include/libnest2d/optimizers/nlopt/genetic.hpp +++ b/src/libnest2d/include/libnest2d/optimizers/nlopt/genetic.hpp @@ -14,6 +14,8 @@ public: localmethod_ = m; return *this; } + + inline void seed(unsigned long val) { nlopt::srand(val); } }; template<> diff --git a/src/libslic3r/Config.cpp b/src/libslic3r/Config.cpp index 6f22ba89e..a7db29b8e 100644 --- a/src/libslic3r/Config.cpp +++ b/src/libslic3r/Config.cpp @@ -3,6 +3,7 @@ #include #include #include +#include #include // std::runtime_error #include #include @@ -14,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -190,6 +192,123 @@ bool unescape_strings_cstyle(const std::string &str, std::vector &o } } +std::vector ConfigOptionDef::cli_args(const std::string &key) const +{ + std::vector args; + if (this->cli != ConfigOptionDef::nocli) { + std::string cli = this->cli.substr(0, this->cli.find("=")); + boost::trim_right_if(cli, boost::is_any_of("!")); + if (cli.empty()) { + // Add the key + std::string opt = key; + boost::replace_all(opt, "_", "-"); + args.emplace_back(std::move(opt)); + } else + boost::split(args, cli, boost::is_any_of("|")); + } + return args; +} + +std::string ConfigOptionDef::nocli = "~~~noCLI"; + +std::ostream& ConfigDef::print_cli_help(std::ostream& out, bool show_defaults, std::function filter) const +{ + // prepare a function for wrapping text + auto wrap = [](std::string text, size_t line_length) -> std::string { + std::istringstream words(text); + std::ostringstream wrapped; + std::string word; + + if (words >> word) { + wrapped << word; + size_t space_left = line_length - word.length(); + while (words >> word) { + if (space_left < word.length() + 1) { + wrapped << '\n' << word; + space_left = line_length - word.length(); + } else { + wrapped << ' ' << word; + space_left -= word.length() + 1; + } + } + } + return wrapped.str(); + }; + + // get the unique categories + std::set categories; + for (const auto& opt : this->options) { + const ConfigOptionDef& def = opt.second; + if (filter(def)) + categories.insert(def.category); + } + + for (auto category : categories) { + if (category != "") { + out << category << ":" << std::endl; + } else if (categories.size() > 1) { + out << "Misc options:" << std::endl; + } + + for (const auto& opt : this->options) { + const ConfigOptionDef& def = opt.second; + if (def.category != category || def.cli == ConfigOptionDef::nocli || !filter(def)) + continue; + + // get all possible variations: --foo, --foobar, -f... + std::vector cli_args = def.cli_args(opt.first); + if (cli_args.empty()) + continue; + + for (auto& arg : cli_args) { + arg.insert(0, (arg.size() == 1) ? "-" : "--"); + if (def.type == coFloat || def.type == coInt || def.type == coFloatOrPercent + || def.type == coFloats || def.type == coInts) { + arg += " N"; + } else if (def.type == coPoint) { + arg += " X,Y"; + } else if (def.type == coPoint3) { + arg += " X,Y,Z"; + } else if (def.type == coString || def.type == coStrings) { + arg += " ABCD"; + } + } + + // left: command line options + const std::string cli = boost::algorithm::join(cli_args, ", "); + out << " " << std::left << std::setw(20) << cli; + + // right: option description + std::string descr = def.tooltip; + if (show_defaults && def.default_value != nullptr && def.type != coBool + && (def.type != coString || !def.default_value->serialize().empty())) { + descr += " ("; + if (!def.sidetext.empty()) { + descr += def.sidetext + ", "; + } else if (!def.enum_values.empty()) { + descr += boost::algorithm::join(def.enum_values, ", ") + "; "; + } + descr += "default: " + def.default_value->serialize() + ")"; + } + + // wrap lines of description + descr = wrap(descr, 80); + std::vector lines; + boost::split(lines, descr, boost::is_any_of("\n")); + + // if command line options are too long, print description in new line + for (size_t i = 0; i < lines.size(); ++i) { + if (i == 0 && cli.size() > 19) + out << std::endl; + if (i > 0 || cli.size() > 19) + out << std::string(21, ' '); + out << lines[i] << std::endl; + } + } + } + return out; +} + void ConfigBase::apply_only(const ConfigBase &other, const t_config_option_keys &keys, bool ignore_nonexistent) { // loop through options and apply them @@ -508,50 +627,53 @@ ConfigOption* DynamicConfig::optptr(const t_config_option_key &opt_key, bool cre // Let the parent decide what to do if the opt_key is not defined by this->def(). return nullptr; ConfigOption *opt = nullptr; - switch (optdef->type) { - case coFloat: opt = new ConfigOptionFloat(); break; - case coFloats: opt = new ConfigOptionFloats(); break; - case coInt: opt = new ConfigOptionInt(); break; - case coInts: opt = new ConfigOptionInts(); break; - case coString: opt = new ConfigOptionString(); break; - case coStrings: opt = new ConfigOptionStrings(); break; - case coPercent: opt = new ConfigOptionPercent(); break; - case coPercents: opt = new ConfigOptionPercents(); break; - case coFloatOrPercent: opt = new ConfigOptionFloatOrPercent(); break; - case coPoint: opt = new ConfigOptionPoint(); break; - case coPoints: opt = new ConfigOptionPoints(); break; - case coBool: opt = new ConfigOptionBool(); break; - case coBools: opt = new ConfigOptionBools(); break; - case coEnum: opt = new ConfigOptionEnumGeneric(optdef->enum_keys_map); break; - default: throw std::runtime_error(std::string("Unknown option type for option ") + opt_key); + if (optdef->default_value != nullptr) { + opt = (optdef->default_value->type() == coEnum) ? + // Special case: For a DynamicConfig, convert a templated enum to a generic enum. + new ConfigOptionEnumGeneric(optdef->enum_keys_map, optdef->default_value->getInt()) : + optdef->default_value->clone(); + } else { + switch (optdef->type) { + case coFloat: opt = new ConfigOptionFloat(); break; + case coFloats: opt = new ConfigOptionFloats(); break; + case coInt: opt = new ConfigOptionInt(); break; + case coInts: opt = new ConfigOptionInts(); break; + case coString: opt = new ConfigOptionString(); break; + case coStrings: opt = new ConfigOptionStrings(); break; + case coPercent: opt = new ConfigOptionPercent(); break; + case coPercents: opt = new ConfigOptionPercents(); break; + case coFloatOrPercent: opt = new ConfigOptionFloatOrPercent(); break; + case coPoint: opt = new ConfigOptionPoint(); break; + case coPoints: opt = new ConfigOptionPoints(); break; + case coPoint3: opt = new ConfigOptionPoint3(); break; + // case coPoint3s: opt = new ConfigOptionPoint3s(); break; + case coBool: opt = new ConfigOptionBool(); break; + case coBools: opt = new ConfigOptionBools(); break; + case coEnum: opt = new ConfigOptionEnumGeneric(optdef->enum_keys_map); break; + default: throw std::runtime_error(std::string("Unknown option type for option ") + opt_key); + } } this->options[opt_key] = opt; return opt; } -void DynamicConfig::read_cli(const std::vector &tokens, t_config_option_keys* extra) +void DynamicConfig::read_cli(const std::vector &tokens, t_config_option_keys* extra, t_config_option_keys* keys) { std::vector args; // push a bogus executable name (argv[0]) args.emplace_back(const_cast("")); for (size_t i = 0; i < tokens.size(); ++ i) args.emplace_back(const_cast(tokens[i].c_str())); - this->read_cli(int(args.size()), &args[0], extra); + this->read_cli(int(args.size()), &args[0], extra, keys); } -bool DynamicConfig::read_cli(int argc, char** argv, t_config_option_keys* extra) +bool DynamicConfig::read_cli(int argc, char** argv, t_config_option_keys* extra, t_config_option_keys* keys) { // cache the CLI option => opt_key mapping std::map opts; - for (const auto &oit : this->def()->options) { - std::string cli = oit.second.cli; - cli = cli.substr(0, cli.find("=")); - boost::trim_right_if(cli, boost::is_any_of("!")); - std::vector tokens; - boost::split(tokens, cli, boost::is_any_of("|")); - for (const std::string &t : tokens) + for (const auto &oit : this->def()->options) + for (auto t : oit.second.cli_args(oit.first)) opts[t] = oit.first; - } bool parse_options = true; for (int i = 1; i < argc; ++ i) { @@ -592,11 +714,8 @@ bool DynamicConfig::read_cli(int argc, char** argv, t_config_option_keys* extra) // Look for the cli -> option mapping. const auto it = opts.find(token); if (it == opts.end()) { - printf("Warning: unknown option --%s\n", token.c_str()); - // instead of continuing, return false to caller - // to stop execution and print usage - return false; - //continue; + boost::nowide::cerr << "Unknown option --" << token.c_str() << std::endl; + return false; } const t_config_option_key opt_key = it->second; const ConfigOptionDef &optdef = this->def()->options.at(opt_key); @@ -604,13 +723,17 @@ bool DynamicConfig::read_cli(int argc, char** argv, t_config_option_keys* extra) // look for it in the next token. if (optdef.type != coBool && optdef.type != coBools && value.empty()) { if (i == (argc-1)) { - printf("No value supplied for --%s\n", token.c_str()); - continue; + boost::nowide::cerr << "No value supplied for --" << token.c_str() << std::endl; + return false; } value = argv[++ i]; } // Store the option value. const bool existing = this->has(opt_key); + if (keys != nullptr && !existing) { + // Save the order of detected keys. + keys->push_back(opt_key); + } ConfigOption *opt_base = this->option(opt_key, true); ConfigOptionVectorBase *opt_vector = opt_base->is_vector() ? static_cast(opt_base) : nullptr; if (opt_vector) { @@ -634,7 +757,10 @@ bool DynamicConfig::read_cli(int argc, char** argv, t_config_option_keys* extra) static_cast(opt_base)->value = value; } else { // Any scalar value of a type different from Bool and String. - this->set_deserialize(opt_key, value, false); + if (! this->set_deserialize(opt_key, value, false)) { + boost::nowide::cerr << "Invalid value supplied for --" << token.c_str() << std::endl; + return false; + } } } return true; diff --git a/src/libslic3r/Config.hpp b/src/libslic3r/Config.hpp index c521f1cbb..1e5972701 100644 --- a/src/libslic3r/Config.hpp +++ b/src/libslic3r/Config.hpp @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,24 @@ extern std::string escape_strings_cstyle(const std::vector &strs); extern bool unescape_string_cstyle(const std::string &str, std::string &out); extern bool unescape_strings_cstyle(const std::string &str, std::vector &out); +/// Specialization of std::exception to indicate that an unknown config option has been encountered. +class UnknownOptionException : public std::runtime_error { +public: + UnknownOptionException() : + std::runtime_error("Unknown option exception") {} + UnknownOptionException(const std::string &opt_key) : + std::runtime_error(std::string("Unknown option exception: ") + opt_key) {} +}; + +/// Indicate that the ConfigBase derived class does not provide config definition (the method def() returns null). +class NoDefinitionException : public std::runtime_error +{ +public: + NoDefinitionException() : + std::runtime_error("No definition exception") {} + NoDefinitionException(const std::string &opt_key) : + std::runtime_error(std::string("No definition exception: ") + opt_key) {} +}; // Type of a configuration value. enum ConfigOptionType { @@ -54,12 +73,14 @@ enum ConfigOptionType { coPoint = 6, // vector of 2d points (Point2f). Currently used for the definition of the print bed and for the extruder offsets. coPoints = coPoint + coVectorType, + coPoint3 = 7, +// coPoint3s = coPoint3 + coVectorType, // single boolean value - coBool = 7, + coBool = 8, // vector of boolean values coBools = coBool + coVectorType, // a generic enum - coEnum = 8, + coEnum = 9, }; enum ConfigOptionMode { @@ -68,6 +89,18 @@ enum ConfigOptionMode { comExpert }; +enum PrinterTechnology +{ + // Fused Filament Fabrication + ptFFF, + // Stereolitography + ptSLA, + // Unknown, useful for command line processing + ptUnknown, + // Any technology, useful for parameters compatible with both ptFFF and ptSLA + ptAny +}; + // A generic value of a configuration option. class ConfigOption { public: @@ -718,6 +751,39 @@ public: } }; + +class ConfigOptionPoint3 : public ConfigOptionSingle +{ +public: + ConfigOptionPoint3() : ConfigOptionSingle(Vec3d(0,0,0)) {} + explicit ConfigOptionPoint3(const Vec3d &value) : ConfigOptionSingle(value) {} + + static ConfigOptionType static_type() { return coPoint3; } + ConfigOptionType type() const override { return static_type(); } + ConfigOption* clone() const override { return new ConfigOptionPoint3(*this); } + ConfigOptionPoint3& operator=(const ConfigOption *opt) { this->set(opt); return *this; } + bool operator==(const ConfigOptionPoint3 &rhs) const { return this->value == rhs.value; } + + std::string serialize() const override + { + std::ostringstream ss; + ss << this->value(0); + ss << ","; + ss << this->value(1); + ss << ","; + ss << this->value(2); + return ss.str(); + } + + bool deserialize(const std::string &str, bool append = false) override + { + UNUSED(append); + char dummy; + return sscanf(str.data(), " %lf , %lf , %lf %c", &this->value(0), &this->value(1), &this->value(2), &dummy) == 2 || + sscanf(str.data(), " %lf x %lf x %lf %c", &this->value(0), &this->value(1), &this->value(2), &dummy) == 2; + } +}; + class ConfigOptionBool : public ConfigOptionSingle { public: @@ -893,6 +959,7 @@ class ConfigOptionEnumGeneric : public ConfigOptionInt { public: ConfigOptionEnumGeneric(const t_config_enum_values* keys_map = nullptr) : keys_map(keys_map) {} + explicit ConfigOptionEnumGeneric(const t_config_enum_values* keys_map, int value) : ConfigOptionInt(value), keys_map(keys_map) {} const t_config_enum_values* keys_map; @@ -960,6 +1027,8 @@ public: // The full label is shown, when adding an override parameter for an object or a modified object. std::string label; std::string full_label; + // With which printer technology is this configuration valid? + PrinterTechnology printer_technology = ptUnknown; // Category of a configuration field, from the GUI perspective. // One of: "Layers and Perimeters", "Infill", "Support material", "Speed", "Extruders", "Advanced", "Extrusion Width" std::string category; @@ -1010,6 +1079,13 @@ public: return true; return false; } + + // Returns the alternative CLI arguments for the given option. + // If there are no cli arguments defined, use the key and replace underscores with dashes. + std::vector cli_args(const std::string &key) const; + + // Assign this key to cli to disable CLI for this option. + static std::string nocli; }; // Map from a config option name to its definition. @@ -1044,6 +1120,11 @@ public: return out; } + /// Iterate through all of the CLI options and write them to a stream. + std::ostream& print_cli_help( + std::ostream& out, bool show_defaults, + std::function filter = [](const ConfigOptionDef &){ return true; }) const; + protected: ConfigOptionDef* add(const t_config_option_key &opt_key, ConfigOptionType type) { ConfigOptionDef* opt = &this->options[opt_key]; @@ -1089,12 +1170,24 @@ public: TYPE* option(const t_config_option_key &opt_key, bool create = false) { ConfigOption *opt = this->optptr(opt_key, create); -// assert(opt == nullptr || opt->type() == TYPE::static_type()); return (opt == nullptr || opt->type() != TYPE::static_type()) ? nullptr : static_cast(opt); } template const TYPE* option(const t_config_option_key &opt_key) const { return const_cast(this)->option(opt_key, false); } + template + TYPE* option_throw(const t_config_option_key &opt_key, bool create = false) + { + ConfigOption *opt = this->optptr(opt_key, create); + if (opt == nullptr) + throw UnknownOptionException(opt_key); + if (opt->type() != TYPE::static_type()) + throw std::runtime_error("Conversion to a wrong type"); + return static_cast(opt); + } + template + const TYPE* option_throw(const t_config_option_key &opt_key) const + { return const_cast(this)->option_throw(opt_key, false); } // Apply all keys of other ConfigBase defined by this->def() to this ConfigBase. // An UnknownOptionException is thrown in case some option keys of other are not defined by this->def(), // or this ConfigBase is of a StaticConfig type and it does not support some of the keys, and ignore_nonexistent is not set. @@ -1276,8 +1369,8 @@ public: bool opt_bool(const t_config_option_key &opt_key, unsigned int idx) const { return this->option(opt_key)->get_at(idx) != 0; } // Command line processing - void read_cli(const std::vector &tokens, t_config_option_keys* extra); - bool read_cli(int argc, char** argv, t_config_option_keys* extra); + void read_cli(const std::vector &tokens, t_config_option_keys* extra, t_config_option_keys* keys = nullptr); + bool read_cli(int argc, char** argv, t_config_option_keys* extra, t_config_option_keys* keys = nullptr); typedef std::map t_options_map; t_options_map::const_iterator cbegin() const { return options.cbegin(); } @@ -1303,25 +1396,6 @@ protected: void set_defaults(); }; -/// Specialization of std::exception to indicate that an unknown config option has been encountered. -class UnknownOptionException : public std::runtime_error { -public: - UnknownOptionException() : - std::runtime_error("Unknown option exception") {} - UnknownOptionException(const std::string &opt_key) : - std::runtime_error(std::string("Unknown option exception: ") + opt_key) {} -}; - -/// Indicate that the ConfigBase derived class does not provide config definition (the method def() returns null). -class NoDefinitionException : public std::runtime_error -{ -public: - NoDefinitionException() : - std::runtime_error("No definition exception") {} - NoDefinitionException(const std::string &opt_key) : - std::runtime_error(std::string("No definition exception: ") + opt_key) {} -}; - } #endif diff --git a/src/libslic3r/Fill/FillPlanePath.cpp b/src/libslic3r/Fill/FillPlanePath.cpp index 615cc6efe..c52353b02 100644 --- a/src/libslic3r/Fill/FillPlanePath.cpp +++ b/src/libslic3r/Fill/FillPlanePath.cpp @@ -15,7 +15,7 @@ void FillPlanePath::_fill_surface_single( { expolygon.rotate(- direction.first); - coord_t distance_between_lines = scale_(this->spacing) / params.density; + coord_t distance_between_lines = coord_t(scale_(this->spacing) / params.density); // align infill across layers using the object's bounding box // Rotated bounding box of the whole object. @@ -89,7 +89,8 @@ Pointfs FillArchimedeanChords::_generate(coord_t min_x, coord_t min_y, coord_t m out.push_back(Vec2d(0, 0)); out.push_back(Vec2d(1, 0)); while (r < rmax) { - theta += 1. / r; + // Discretization angle to achieve a discretization error lower than RESOLUTION. + theta += 2. * acos(1. - RESOLUTION / r); r = a + b * theta; out.push_back(Vec2d(r * cos(theta), r * sin(theta))); } diff --git a/src/libslic3r/Format/3mf.cpp b/src/libslic3r/Format/3mf.cpp index d2b9b08f3..5a16a6e8f 100644 --- a/src/libslic3r/Format/3mf.cpp +++ b/src/libslic3r/Format/3mf.cpp @@ -587,8 +587,10 @@ namespace Slic3r { object.second->layer_height_profile = obj_layer_heights_profile->second; IdToSlaSupportPointsMap::iterator obj_sla_support_points = m_sla_support_points.find(object.first); - if (obj_sla_support_points != m_sla_support_points.end() && !obj_sla_support_points->second.empty()) + if (obj_sla_support_points != m_sla_support_points.end() && !obj_sla_support_points->second.empty()) { object.second->sla_support_points = obj_sla_support_points->second; + object.second->sla_points_status = sla::PointsStatus::UserModified; + } IdToMetadataMap::iterator obj_metadata = m_objects_metadata.find(object.first); if (obj_metadata != m_objects_metadata.end()) diff --git a/src/libslic3r/Format/AMF.cpp b/src/libslic3r/Format/AMF.cpp index 35c90a00c..f5219263d 100644 --- a/src/libslic3r/Format/AMF.cpp +++ b/src/libslic3r/Format/AMF.cpp @@ -600,6 +600,7 @@ void AMFParserContext::endElement(const char * /* name */) break; p = end + 1; } + m_object->sla_points_status = sla::PointsStatus::UserModified; } else if (m_path.size() == 5 && m_path[3] == NODE_TYPE_VOLUME && m_volume) { if (strcmp(opt_key, "modifier") == 0) { diff --git a/src/libslic3r/Format/OBJ.cpp b/src/libslic3r/Format/OBJ.cpp index ee5756083..85ca73551 100644 --- a/src/libslic3r/Format/OBJ.cpp +++ b/src/libslic3r/Format/OBJ.cpp @@ -115,4 +115,23 @@ bool load_obj(const char *path, Model *model, const char *object_name_in) return true; } +bool store_obj(const char *path, TriangleMesh *mesh) +{ + //FIXME returning false even if write failed. + mesh->WriteOBJFile(path); + return true; +} + +bool store_obj(const char *path, ModelObject *model_object) +{ + TriangleMesh mesh = model_object->mesh(); + return store_obj(path, &mesh); +} + +bool store_obj(const char *path, Model *model) +{ + TriangleMesh mesh = model->mesh(); + return store_obj(path, &mesh); +} + }; // namespace Slic3r diff --git a/src/libslic3r/Format/OBJ.hpp b/src/libslic3r/Format/OBJ.hpp index 9a8790bff..36aa17951 100644 --- a/src/libslic3r/Format/OBJ.hpp +++ b/src/libslic3r/Format/OBJ.hpp @@ -9,6 +9,10 @@ class Model; // Load an OBJ file into a provided model. extern bool load_obj(const char *path, Model *model, const char *object_name = nullptr); +extern bool store_obj(const char *path, TriangleMesh *mesh); +extern bool store_obj(const char *path, ModelObject *model); +extern bool store_obj(const char *path, Model *model); + }; // namespace Slic3r #endif /* slic3r_Format_OBJ_hpp_ */ diff --git a/src/libslic3r/Format/STL.cpp b/src/libslic3r/Format/STL.cpp index 99e2ff193..b00623d1d 100644 --- a/src/libslic3r/Format/STL.cpp +++ b/src/libslic3r/Format/STL.cpp @@ -55,4 +55,10 @@ bool store_stl(const char *path, ModelObject *model_object, bool binary) return store_stl(path, &mesh, binary); } +bool store_stl(const char *path, Model *model, bool binary) +{ + TriangleMesh mesh = model->mesh(); + return store_stl(path, &mesh, binary); +} + }; // namespace Slic3r diff --git a/src/libslic3r/Format/STL.hpp b/src/libslic3r/Format/STL.hpp index 2fd32324c..cff7dc086 100644 --- a/src/libslic3r/Format/STL.hpp +++ b/src/libslic3r/Format/STL.hpp @@ -11,6 +11,7 @@ extern bool load_stl(const char *path, Model *model, const char *object_name = n extern bool store_stl(const char *path, TriangleMesh *mesh, bool binary); extern bool store_stl(const char *path, ModelObject *model_object, bool binary); +extern bool store_stl(const char *path, Model *model, bool binary); }; // namespace Slic3r diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 2907415bf..94be37b21 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -487,7 +487,7 @@ void GCode::do_export(Print *print, const char *path, GCodePreviewData *preview_ // starts analyzer calculations if (m_enable_analyzer) { BOOST_LOG_TRIVIAL(debug) << "Preparing G-code preview data"; - m_analyzer.calc_gcode_preview_data(*preview_data); + m_analyzer.calc_gcode_preview_data(*preview_data, [print]() { print->throw_if_canceled(); }); m_analyzer.reset(); } diff --git a/src/libslic3r/GCode/Analyzer.cpp b/src/libslic3r/GCode/Analyzer.cpp index e1fb140bb..d1ad4f575 100644 --- a/src/libslic3r/GCode/Analyzer.cpp +++ b/src/libslic3r/GCode/Analyzer.cpp @@ -137,22 +137,22 @@ const std::string& GCodeAnalyzer::process_gcode(const std::string& gcode) return m_process_output; } -void GCodeAnalyzer::calc_gcode_preview_data(GCodePreviewData& preview_data) +void GCodeAnalyzer::calc_gcode_preview_data(GCodePreviewData& preview_data, std::function cancel_callback) { // resets preview data preview_data.reset(); // calculates extrusion layers - _calc_gcode_preview_extrusion_layers(preview_data); + _calc_gcode_preview_extrusion_layers(preview_data, cancel_callback); // calculates travel - _calc_gcode_preview_travel(preview_data); + _calc_gcode_preview_travel(preview_data, cancel_callback); // calculates retractions - _calc_gcode_preview_retractions(preview_data); + _calc_gcode_preview_retractions(preview_data, cancel_callback); // calculates unretractions - _calc_gcode_preview_unretractions(preview_data); + _calc_gcode_preview_unretractions(preview_data, cancel_callback); } bool GCodeAnalyzer::is_valid_extrusion_role(ExtrusionRole role) @@ -676,7 +676,7 @@ bool GCodeAnalyzer::_is_valid_extrusion_role(int value) const return ((int)erNone <= value) && (value <= (int)erMixed); } -void GCodeAnalyzer::_calc_gcode_preview_extrusion_layers(GCodePreviewData& preview_data) +void GCodeAnalyzer::_calc_gcode_preview_extrusion_layers(GCodePreviewData& preview_data, std::function cancel_callback) { struct Helper { @@ -725,9 +725,18 @@ void GCodeAnalyzer::_calc_gcode_preview_extrusion_layers(GCodePreviewData& previ GCodePreviewData::Range feedrate_range; GCodePreviewData::Range volumetric_rate_range; + // to avoid to call the callback too often + unsigned int cancel_callback_threshold = (unsigned int)std::max((int)extrude_moves->second.size() / 25, 1); + unsigned int cancel_callback_curr = 0; + // constructs the polylines while traversing the moves for (const GCodeMove& move : extrude_moves->second) { + // to avoid to call the callback too often + cancel_callback_curr = (cancel_callback_curr + 1) % cancel_callback_threshold; + if (cancel_callback_curr == 0) + cancel_callback(); + if ((data != move.data) || (z != move.start_position.z()) || (position != move.start_position) || (volumetric_rate != move.data.feedrate * (float)move.data.mm3_per_mm)) { // store current polyline @@ -769,7 +778,7 @@ void GCodeAnalyzer::_calc_gcode_preview_extrusion_layers(GCodePreviewData& previ preview_data.ranges.volumetric_rate.update_from(volumetric_rate_range); } -void GCodeAnalyzer::_calc_gcode_preview_travel(GCodePreviewData& preview_data) +void GCodeAnalyzer::_calc_gcode_preview_travel(GCodePreviewData& preview_data, std::function cancel_callback) { struct Helper { @@ -797,9 +806,17 @@ void GCodeAnalyzer::_calc_gcode_preview_travel(GCodePreviewData& preview_data) GCodePreviewData::Range width_range; GCodePreviewData::Range feedrate_range; + // to avoid to call the callback too often + unsigned int cancel_callback_threshold = (unsigned int)std::max((int)travel_moves->second.size() / 25, 1); + unsigned int cancel_callback_curr = 0; + // constructs the polylines while traversing the moves for (const GCodeMove& move : travel_moves->second) { + cancel_callback_curr = (cancel_callback_curr + 1) % cancel_callback_threshold; + if (cancel_callback_curr == 0) + cancel_callback(); + GCodePreviewData::Travel::EType move_type = (move.delta_extruder < 0.0f) ? GCodePreviewData::Travel::Retract : ((move.delta_extruder > 0.0f) ? GCodePreviewData::Travel::Extrude : GCodePreviewData::Travel::Move); GCodePreviewData::Travel::Polyline::EDirection move_direction = ((move.start_position.x() != move.end_position.x()) || (move.start_position.y() != move.end_position.y())) ? GCodePreviewData::Travel::Polyline::Generic : GCodePreviewData::Travel::Polyline::Vertical; @@ -840,28 +857,44 @@ void GCodeAnalyzer::_calc_gcode_preview_travel(GCodePreviewData& preview_data) preview_data.ranges.feedrate.update_from(feedrate_range); } -void GCodeAnalyzer::_calc_gcode_preview_retractions(GCodePreviewData& preview_data) +void GCodeAnalyzer::_calc_gcode_preview_retractions(GCodePreviewData& preview_data, std::function cancel_callback) { TypeToMovesMap::iterator retraction_moves = m_moves_map.find(GCodeMove::Retract); if (retraction_moves == m_moves_map.end()) return; + // to avoid to call the callback too often + unsigned int cancel_callback_threshold = (unsigned int)std::max((int)retraction_moves->second.size() / 25, 1); + unsigned int cancel_callback_curr = 0; + for (const GCodeMove& move : retraction_moves->second) { + cancel_callback_curr = (cancel_callback_curr + 1) % cancel_callback_threshold; + if (cancel_callback_curr == 0) + cancel_callback(); + // store position Vec3crd position(scale_(move.start_position.x()), scale_(move.start_position.y()), scale_(move.start_position.z())); preview_data.retraction.positions.emplace_back(position, move.data.width, move.data.height); } } -void GCodeAnalyzer::_calc_gcode_preview_unretractions(GCodePreviewData& preview_data) +void GCodeAnalyzer::_calc_gcode_preview_unretractions(GCodePreviewData& preview_data, std::function cancel_callback) { TypeToMovesMap::iterator unretraction_moves = m_moves_map.find(GCodeMove::Unretract); if (unretraction_moves == m_moves_map.end()) return; + // to avoid to call the callback too often + unsigned int cancel_callback_threshold = (unsigned int)std::max((int)unretraction_moves->second.size() / 25, 1); + unsigned int cancel_callback_curr = 0; + for (const GCodeMove& move : unretraction_moves->second) { + cancel_callback_curr = (cancel_callback_curr + 1) % cancel_callback_threshold; + if (cancel_callback_curr == 0) + cancel_callback(); + // store position Vec3crd position(scale_(move.start_position.x()), scale_(move.start_position.y()), scale_(move.start_position.z())); preview_data.unretraction.positions.emplace_back(position, move.data.width, move.data.height); diff --git a/src/libslic3r/GCode/Analyzer.hpp b/src/libslic3r/GCode/Analyzer.hpp index c74a4558c..4c201c640 100644 --- a/src/libslic3r/GCode/Analyzer.hpp +++ b/src/libslic3r/GCode/Analyzer.hpp @@ -122,7 +122,8 @@ public: const std::string& process_gcode(const std::string& gcode); // Calculates all data needed for gcode visualization - void calc_gcode_preview_data(GCodePreviewData& preview_data); + // throws CanceledException through print->throw_if_canceled() (sent by the caller as callback). + void calc_gcode_preview_data(GCodePreviewData& preview_data, std::function cancel_callback = std::function()); // Return an estimate of the memory consumed by the time estimator. size_t memory_used() const; @@ -237,10 +238,11 @@ private: // Checks if the given int is a valid extrusion role (contained into enum ExtrusionRole) bool _is_valid_extrusion_role(int value) const; - void _calc_gcode_preview_extrusion_layers(GCodePreviewData& preview_data); - void _calc_gcode_preview_travel(GCodePreviewData& preview_data); - void _calc_gcode_preview_retractions(GCodePreviewData& preview_data); - void _calc_gcode_preview_unretractions(GCodePreviewData& preview_data); + // All the following methods throw CanceledException through print->throw_if_canceled() (sent by the caller as callback). + void _calc_gcode_preview_extrusion_layers(GCodePreviewData& preview_data, std::function cancel_callback); + void _calc_gcode_preview_travel(GCodePreviewData& preview_data, std::function cancel_callback); + void _calc_gcode_preview_retractions(GCodePreviewData& preview_data, std::function cancel_callback); + void _calc_gcode_preview_unretractions(GCodePreviewData& preview_data, std::function cancel_callback); }; } // namespace Slic3r diff --git a/src/libslic3r/GCode/PostProcessor.cpp b/src/libslic3r/GCode/PostProcessor.cpp index e86463b84..df4acc1bf 100644 --- a/src/libslic3r/GCode/PostProcessor.cpp +++ b/src/libslic3r/GCode/PostProcessor.cpp @@ -2,6 +2,7 @@ #include #include +#include #include #ifdef WIN32 @@ -88,7 +89,7 @@ static DWORD execute_process_winapi(const std::wstring &command_line) // Run the script. If it is a perl script, run it through the bundled perl interpreter. // If it is a batch file, run it through the cmd.exe. // Otherwise run it directly. -static int run_script_win32(const std::string &script, const std::string &gcode) +static int run_script(const std::string &script, const std::string &gcode, std::string &/*std_err*/) { // Unpack the argument list provided by the user. int nArgs; @@ -132,9 +133,46 @@ static int run_script_win32(const std::string &script, const std::string &gcode) } #else - #include //for getting filesystem UID/GID - #include //for getting current UID/GID - #include + // POSIX + +#include // getenv() +#include +#include + +namespace process = boost::process; + +static int run_script(const std::string &script, const std::string &gcode, std::string &std_err) +{ + // Try to obtain user's default shell + const char *shell = ::getenv("SHELL"); + if (shell == nullptr) { shell = "sh"; } + + // Quote and escape the gcode path argument + std::string command { script }; + command.append(" '"); + for (char c : gcode) { + if (c == '\'') { command.append("'\\''"); } + else { command.push_back(c); } + } + command.push_back('\''); + + BOOST_LOG_TRIVIAL(debug) << boost::format("Executing script, shell: %1%, command: %2%") % shell % command; + + process::ipstream istd_err; + process::child child(shell, "-c", command, process::std_err > istd_err); + + std_err.clear(); + std::string line; + + while (child.running() && std::getline(istd_err, line)) { + std_err.append(line); + std_err.push_back('\n'); + } + + child.wait(); + return child.exit_code(); +} + #endif namespace Slic3r { @@ -158,27 +196,15 @@ void run_post_process_scripts(const std::string &path, const PrintConfig &config if (script.empty()) continue; BOOST_LOG_TRIVIAL(info) << "Executing script " << script << " on file " << path; -#ifdef WIN32 - int result = run_script_win32(script, gcode_file.string()); -#else - //FIXME testing existence of a script is risky, as the script line may contain the script and some additional command line parameters. - // We would have to process the script line into parameters before testing for the existence of the command, the command may be looked up - // in the PATH etc. - if (! boost::filesystem::exists(boost::filesystem::path(script))) - throw std::runtime_error(std::string("The configured post-processing script does not exist: ") + script); - struct stat info; - if (stat(script.c_str(), &info)) - throw std::runtime_error(std::string("Cannot read information for post-processing script: ") + script); - boost::filesystem::perms script_perms = boost::filesystem::status(script).permissions(); - //if UID matches, check UID perm. else if GID matches, check GID perm. Otherwise check other perm. - if (!(script_perms & ((info.st_uid == geteuid()) ? boost::filesystem::perms::owner_exe - : ((info.st_gid == getegid()) ? boost::filesystem::perms::group_exe - : boost::filesystem::perms::others_exe)))) - throw std::runtime_error(std::string("The configured post-processing script is not executable: check permissions. ") + script); - int result = boost::process::system(script, gcode_file); - if (result < 0) - BOOST_LOG_TRIVIAL(error) << "Script " << script << " on file " << path << " failed. Negative error code returned."; -#endif + + std::string std_err; + const int result = run_script(script, gcode_file.string(), std_err); + if (result != 0) { + const std::string msg = std_err.empty() ? (boost::format("Post-processing script %1% on file %2% failed.\nError code: %3%") % script % path % result).str() + : (boost::format("Post-processing script %1% on file %2% failed.\nError code: %3%\nOutput:\n%4%") % script % path % result % std_err).str(); + BOOST_LOG_TRIVIAL(error) << msg; + throw std::runtime_error(msg); + } } } } diff --git a/src/libslic3r/GCode/WipeTowerPrusaMM.cpp b/src/libslic3r/GCode/WipeTowerPrusaMM.cpp index 031fd9a28..829fe1bb9 100644 --- a/src/libslic3r/GCode/WipeTowerPrusaMM.cpp +++ b/src/libslic3r/GCode/WipeTowerPrusaMM.cpp @@ -709,12 +709,11 @@ WipeTower::ToolChangeResult WipeTowerPrusaMM::toolchange_Brim(bool sideOnly, flo // The tool is supposed to be active and primed at the time when the wipe tower brim is extruded. // Extrude 4 rounds of a brim around the future wipe tower. box_coordinates box(wipeTower_box); - box.expand(m_perimeter_width); for (size_t i = 0; i < 4; ++ i) { + box.expand(m_perimeter_width - m_layer_height*(1.f-M_PI_4)); // the brim shall have 'normal' spacing with no extra void space writer.travel (box.ld, 7000) .extrude(box.lu, 2100).extrude(box.ru) .extrude(box.rd ).extrude(box.ld); - box.expand(m_perimeter_width); } writer.travel(wipeTower_box.ld, 7000); // Move to the front left corner. diff --git a/src/libslic3r/Model.cpp b/src/libslic3r/Model.cpp index 9c5f8c826..68f71c308 100644 --- a/src/libslic3r/Model.cpp +++ b/src/libslic3r/Model.cpp @@ -577,6 +577,11 @@ end: return input_file; } +std::string Model::propose_export_file_name_and_path(const std::string &new_extension) const +{ + return boost::filesystem::path(this->propose_export_file_name_and_path()).replace_extension(new_extension).string(); +} + ModelObject::~ModelObject() { this->clear_volumes(); @@ -1456,6 +1461,15 @@ int ModelVolume::extruder_id() const return extruder_id; } +bool ModelVolume::is_splittable() const +{ + // the call mesh.has_multiple_patches() is expensive, so cache the value to calculate it only once + if (m_is_splittable == -1) + m_is_splittable = (int)mesh.has_multiple_patches(); + + return m_is_splittable == 1; +} + void ModelVolume::center_geometry() { #if ENABLE_VOLUMES_CENTERING_FIXES @@ -1568,6 +1582,22 @@ void ModelVolume::scale(const Vec3d& scaling_factors) set_scaling_factor(get_scaling_factor().cwiseProduct(scaling_factors)); } +void ModelObject::scale_to_fit(const Vec3d &size) +{ +/* + BoundingBoxf3 instance_bounding_box(size_t instance_idx, bool dont_translate = false) const; + Vec3d orig_size = this->bounding_box().size(); + float factor = fminf( + size.x / orig_size.x, + fminf( + size.y / orig_size.y, + size.z / orig_size.z + ) + ); + this->scale(factor); +*/ +} + void ModelVolume::rotate(double angle, Axis axis) { switch (axis) diff --git a/src/libslic3r/Model.hpp b/src/libslic3r/Model.hpp index a4b32d93f..1260500ee 100644 --- a/src/libslic3r/Model.hpp +++ b/src/libslic3r/Model.hpp @@ -245,6 +245,10 @@ public: void scale(const Vec3d &versor); void scale(const double s) { this->scale(Vec3d(s, s, s)); } void scale(double x, double y, double z) { this->scale(Vec3d(x, y, z)); } + /// Scale the current ModelObject to fit by altering the scaling factor of ModelInstances. + /// It operates on the total size by duplicating the object according to all the instances. + /// \param size Sizef3 the size vector + void scale_to_fit(const Vec3d &size); void rotate(double angle, Axis axis); void rotate(double angle, const Vec3d& axis); void mirror(Axis axis); @@ -336,8 +340,7 @@ public: // Extruder ID is only valid for FFF. Returns -1 for SLA or if the extruder ID is not applicable (support volumes). int extruder_id() const; - void set_splittable(const int val) { m_is_splittable = val; } - int is_splittable() const { return m_is_splittable; } + bool is_splittable() const; // Split this volume, append the result to the object owning this volume. // Return the number of volumes created from this one. @@ -417,7 +420,7 @@ private: // -1 -> is unknown value (before first cheking) // 0 -> is not splittable // 1 -> is splittable - int m_is_splittable {-1}; + mutable int m_is_splittable{ -1 }; ModelVolume(ModelObject *object, const TriangleMesh &mesh) : mesh(mesh), m_type(ModelVolumeType::MODEL_PART), object(object) { @@ -619,6 +622,8 @@ public: // Propose an output file name & path based on the first printable object's name and source input file's path. std::string propose_export_file_name_and_path() const; + // Propose an output path, replace extension. The new_extension shall contain the initial dot. + std::string propose_export_file_name_and_path(const std::string &new_extension) const; private: MODELBASE_DERIVED_PRIVATE_COPY_MOVE(Model) diff --git a/src/libslic3r/Point.hpp b/src/libslic3r/Point.hpp index a03e6f436..6b35600cb 100644 --- a/src/libslic3r/Point.hpp +++ b/src/libslic3r/Point.hpp @@ -224,7 +224,7 @@ public: const ValueType &value = it->second; const Vec2crd *pt2 = m_point_accessor(value); if (pt2 != nullptr) { - const double d2 = (pt - *pt2).squaredNorm(); + const double d2 = (pt - *pt2).cast().squaredNorm(); if (d2 < dist_min) { dist_min = d2; value_min = &value; diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index 8ed70fde6..794390133 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -661,6 +661,9 @@ Print::ApplyStatus Print::apply(const Model &model, const DynamicPrintConfig &co // Make a copy of the config, normalize it. DynamicPrintConfig config(config_in); + config.option("print_settings_id", true); + config.option("filament_settings_id", true); + config.option("printer_settings_id", true); config.normalize(); // Collect changes to print config. t_config_option_keys print_diff = m_config.diff(config); @@ -688,9 +691,9 @@ Print::ApplyStatus Print::apply(const Model &model, const DynamicPrintConfig &co PlaceholderParser &pp = this->placeholder_parser(); pp.apply_only(config, placeholder_parser_diff); // Set the profile aliases for the PrintBase::output_filename() - pp.set("print_preset", config_in.option("print_settings_id" )->clone()); - pp.set("filament_preset", config_in.option("filament_settings_id")->clone()); - pp.set("printer_preset", config_in.option("printer_settings_id" )->clone()); + pp.set("print_preset", config.option("print_settings_id")->clone()); + pp.set("filament_preset", config.option("filament_settings_id")->clone()); + pp.set("printer_preset", config.option("printer_settings_id")->clone()); } // It is also safe to change m_config now after this->invalidate_state_by_config_options() call. @@ -1509,7 +1512,7 @@ void Print::process() // The export_gcode may die for various reasons (fails to process output_filename_format, // write error into the G-code, cannot execute post-processing scripts). // It is up to the caller to show an error message. -void Print::export_gcode(const std::string &path_template, GCodePreviewData *preview_data) +std::string Print::export_gcode(const std::string &path_template, GCodePreviewData *preview_data) { // output everything to a G-code file // The following call may die if the output_filename_format template substitution fails. @@ -1525,6 +1528,7 @@ void Print::export_gcode(const std::string &path_template, GCodePreviewData *pre // The following line may die for multiple reasons. GCode gcode; gcode.do_export(this, path.c_str(), preview_data); + return path.c_str(); } void Print::_make_skirt() @@ -1693,8 +1697,10 @@ void Print::_make_brim() } polygons_append(loops, offset(islands, -0.5f * float(flow.scaled_spacing()))); } - + loops = union_pt_chained(loops, false); + // The function above produces ordering well suited for concentric infill (from outside to inside). + // For Brim, the ordering should be reversed (from inside to outside). std::reverse(loops.begin(), loops.end()); extrusion_entities_append_loops(m_brim.entities, std::move(loops), erSkirt, float(flow.mm3_per_mm()), float(flow.width), float(this->skirt_first_layer_height())); } diff --git a/src/libslic3r/Print.hpp b/src/libslic3r/Print.hpp index 0eea71046..9e97ab20c 100644 --- a/src/libslic3r/Print.hpp +++ b/src/libslic3r/Print.hpp @@ -297,7 +297,9 @@ public: bool apply_config(DynamicPrintConfig config); void process() override; - void export_gcode(const std::string &path_template, GCodePreviewData *preview_data); + // Exports G-code into a file name based on the path_template, returns the file path of the generated G-code file. + // If preview_data is not null, the preview_data is filled in for the G-code visualization (not used by the command line Slic3r). + std::string export_gcode(const std::string &path_template, GCodePreviewData *preview_data); // methods for handling state bool is_step_done(PrintStep step) const { return Inherited::is_step_done(step); } diff --git a/src/libslic3r/PrintBase.hpp b/src/libslic3r/PrintBase.hpp index e01b678a5..2d47d3567 100644 --- a/src/libslic3r/PrintBase.hpp +++ b/src/libslic3r/PrintBase.hpp @@ -272,6 +272,7 @@ public: NO_RELOAD_SCENE = 0, RELOAD_SCENE = 1 << 1, RELOAD_SLA_SUPPORT_POINTS = 1 << 2, + RELOAD_SLA_PREVIEW = 1 << 3, }; // Bitmap of FlagBits unsigned int flags; diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 1c78a3e31..a9fc1c63f 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -16,11 +16,21 @@ namespace Slic3r { //! return same string #define L(s) Slic3r::I18N::translate(s) +static void assign_printer_technology_to_unknown(t_optiondef_map &options, PrinterTechnology printer_technology) +{ + for (std::pair &kvp : options) + if (kvp.second.printer_technology == ptUnknown) + kvp.second.printer_technology = printer_technology; +} + PrintConfigDef::PrintConfigDef() { this->init_common_params(); + assign_printer_technology_to_unknown(this->options, ptAny); this->init_fff_params(); + assign_printer_technology_to_unknown(this->options, ptFFF); this->init_sla_params(); + assign_printer_technology_to_unknown(this->options, ptSLA); } void PrintConfigDef::init_common_params() @@ -31,7 +41,6 @@ void PrintConfigDef::init_common_params() def = this->add("printer_technology", coEnum); def->label = L("Printer technology"); def->tooltip = L("Printer technology"); - def->cli = "printer-technology=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("FFF"); def->enum_values.push_back("SLA"); @@ -48,7 +57,6 @@ void PrintConfigDef::init_common_params() def->tooltip = L("This setting controls the height (and thus the total number) of the slices/layers. " "Thinner layers give better accuracy but take more time to print."); def->sidetext = L("mm"); - def->cli = "layer-height=f"; def->min = 0; def->default_value = new ConfigOptionFloat(0.3); @@ -56,7 +64,6 @@ void PrintConfigDef::init_common_params() def->label = L("Max print height"); def->tooltip = L("Set this to the maximum height that can be reached by your extruder while printing."); def->sidetext = L("mm"); - def->cli = "max-print-height=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(200.0); @@ -66,7 +73,6 @@ void PrintConfigDef::init_common_params() def->tooltip = L("Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. " "The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low."); def->sidetext = L("mm"); - def->cli = "slice-closing-radius=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0.049); @@ -75,7 +81,6 @@ void PrintConfigDef::init_common_params() def->label = L("Hostname, IP or URL"); def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance."); - def->cli = "print-host=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionString(""); @@ -83,7 +88,6 @@ void PrintConfigDef::init_common_params() def->label = L("API Key / Password"); def->tooltip = L("Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication."); - def->cli = "printhost-apikey=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionString(""); @@ -91,7 +95,6 @@ void PrintConfigDef::init_common_params() def->label = "HTTPS CA File"; def->tooltip = "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. " "If left blank, the default OS CA certificate repository is used."; - def->cli = "printhost-cafile=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionString(""); } @@ -109,7 +112,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Optimize travel moves in order to minimize the crossing of perimeters. " "This is mostly useful with Bowden extruders which suffer from oozing. " "This feature slows down both the print and the G-code generation."); - def->cli = "avoid-crossing-perimeters!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -117,7 +119,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Other layers"); def->tooltip = L("Bed temperature for layers after the first one. " "Set this to zero to disable bed temperature control commands in the output."); - def->cli = "bed-temperature=i@"; def->full_label = L("Bed temperature"); def->min = 0; def->max = 300; @@ -128,7 +129,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]."); - def->cli = "before-layer-gcode=s"; def->multiline = true; def->full_width = true; def->height = 50; @@ -138,7 +138,6 @@ void PrintConfigDef::init_fff_params() def = this->add("between_objects_gcode", coString); def->label = L("Between objects G-code"); def->tooltip = L("This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want."); - def->cli = "between-objects-gcode=s"; def->multiline = true; def->full_width = true; def->height = 120; @@ -149,7 +148,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Bottom"); def->category = L("Layers and Perimeters"); def->tooltip = L("Number of solid layers to generate on bottom surfaces."); - def->cli = "bottom-solid-layers=i"; def->full_label = L("Bottom solid layers"); def->min = 0; def->default_value = new ConfigOptionInt(3); @@ -159,7 +157,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This is the acceleration your printer will use for bridges. " "Set zero to disable acceleration control for bridges."); def->sidetext = L("mm/s²"); - def->cli = "bridge-acceleration=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -171,7 +168,6 @@ void PrintConfigDef::init_fff_params() "automatically. Otherwise the provided angle will be used for all bridges. " "Use 180° for zero angle."); def->sidetext = L("°"); - def->cli = "bridge-angle=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0.); @@ -180,7 +176,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Bridges fan speed"); def->tooltip = L("This fan speed is enforced during all bridges and overhangs."); def->sidetext = L("%"); - def->cli = "bridge-fan-speed=i@"; def->min = 0; def->max = 100; def->mode = comExpert; @@ -193,7 +188,6 @@ void PrintConfigDef::init_fff_params() "You can decrease it slightly to pull the extrudates and prevent sagging, " "although default settings are usually good and you should experiment " "with cooling (use a fan) before tweaking this."); - def->cli = "bridge-flow-ratio=f"; def->min = 0; def->max = 2; def->mode = comAdvanced; @@ -204,7 +198,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Speed"); def->tooltip = L("Speed for printing bridges."); def->sidetext = L("mm/s"); - def->cli = "bridge-speed=f"; def->aliases = { "bridge_feed_rate" }; def->min = 0; def->mode = comAdvanced; @@ -214,7 +207,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Brim width"); def->tooltip = L("Horizontal width of the brim that will be printed around each object on the first layer."); def->sidetext = L("mm"); - def->cli = "brim-width=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0); @@ -224,20 +216,19 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("When printing multi-material objects, this settings will make slic3r " "to clip the overlapping object parts one by the other " "(2nd part will be clipped by the 1st, 3rd part will be clipped by the 1st and 2nd etc)."); - def->cli = "clip-multipart-objects!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); def = this->add("colorprint_heights", coFloats); def->label = L("Colorprint height"); def->tooltip = L("Heights at which a filament change is to occur. "); - def->cli = "colorprint-heights=f@"; def->default_value = new ConfigOptionFloats { }; def = this->add("compatible_printers", coStrings); def->label = L("Compatible printers"); def->mode = comAdvanced; def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("compatible_printers_condition", coString); def->label = L("Compatible printers condition"); @@ -246,11 +237,13 @@ void PrintConfigDef::init_fff_params() "with the active printer profile."); def->mode = comExpert; def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("compatible_prints", coStrings); def->label = L("Compatible print profiles"); def->mode = comAdvanced; def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("compatible_prints_condition", coString); def->label = L("Compatible print profiles condition"); @@ -259,13 +252,16 @@ void PrintConfigDef::init_fff_params() "with the active print profile."); def->mode = comExpert; def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; // The following value is to be stored into the project file (AMF, 3MF, Config ...) // and it contains a sum of "compatible_printers_condition" values over the print and filament profiles. def = this->add("compatible_printers_condition_cummulative", coStrings); def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("compatible_prints_condition_cummulative", coStrings); def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("complete_objects", coBool); def->label = L("Complete individual objects"); @@ -273,7 +269,6 @@ void PrintConfigDef::init_fff_params() "each object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. " "Slic3r should warn and prevent you from extruder collisions, but beware."); - def->cli = "complete-objects!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(false); @@ -281,14 +276,12 @@ void PrintConfigDef::init_fff_params() def->label = L("Enable auto cooling"); def->tooltip = L("This flag enables the automatic cooling logic that adjusts print speed " "and fan speed according to layer printing time."); - def->cli = "cooling!"; def->default_value = new ConfigOptionBools { true }; def = this->add("cooling_tube_retraction", coFloat); def->label = L("Cooling tube position"); def->tooltip = L("Distance of the center-point of the cooling tube from the extruder tip "); def->sidetext = L("mm"); - def->cli = "cooling_tube_retraction=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(91.5f); @@ -297,7 +290,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Cooling tube length"); def->tooltip = L("Length of the cooling tube to limit space for cooling moves inside it "); def->sidetext = L("mm"); - def->cli = "cooling_tube_length=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(5.f); @@ -308,7 +300,6 @@ void PrintConfigDef::init_fff_params() "the role-specific acceleration values are used (perimeter/infill). " "Set zero to prevent resetting acceleration at all."); def->sidetext = L("mm/s²"); - def->cli = "default-acceleration=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -318,19 +309,20 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Default filament profile associated with the current printer profile. " "On selection of the current printer profile, this filament profile will be activated."); def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("default_print_profile", coString); def->label = L("Default print profile"); def->tooltip = L("Default print profile associated with the current printer profile. " "On selection of the current printer profile, this print profile will be activated."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("disable_fan_first_layers", coInts); def->label = L("Disable fan for the first"); def->tooltip = L("You can set this to a positive value to disable fan at all " "during the first layers, so that it does not make adhesion worse."); def->sidetext = L("layers"); - def->cli = "disable-fan-first-layers=i@"; def->min = 0; def->max = 1000; def->mode = comExpert; @@ -341,7 +333,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Experimental option for preventing support material from being generated " "under bridged areas."); - def->cli = "dont-support-bridges!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(true); @@ -349,7 +340,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Distance between copies"); def->tooltip = L("Distance used for the auto-arrange feature of the plater."); def->sidetext = L("mm"); - def->cli = "duplicate-distance=f"; def->aliases = { "multiply_distance" }; def->min = 0; def->default_value = new ConfigOptionFloat(6); @@ -360,7 +350,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("The first layer will be shrunk in the XY plane by the configured value " "to compensate for the 1st layer squish aka an Elephant Foot effect."); def->sidetext = L("mm"); - def->cli = "elefant-foot-compensation=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0); @@ -369,7 +358,6 @@ void PrintConfigDef::init_fff_params() def->label = L("End G-code"); def->tooltip = L("This end procedure is inserted at the end of the output file. " "Note that you can use placeholder variables for all Slic3r settings."); - def->cli = "end-gcode=s"; def->multiline = true; def->full_width = true; def->height = 120; @@ -381,7 +369,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This end procedure is inserted at the end of the output file, before the printer end gcode. " "Note that you can use placeholder variables for all Slic3r settings. " "If you have multiple extruders, the gcode is processed in extruder order."); - def->cli = "end-filament-gcode=s@"; def->multiline = true; def->full_width = true; def->height = 120; @@ -393,7 +380,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Layers and Perimeters"); def->tooltip = L("Add solid infill near sloping surfaces to guarantee the vertical shell thickness " "(top+bottom solid layers)."); - def->cli = "ensure-vertical-shell-thickness!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(false); @@ -401,7 +387,7 @@ void PrintConfigDef::init_fff_params() def->label = L("Top fill pattern"); def->category = L("Infill"); def->tooltip = L("Fill pattern for top infill. This only affects the top visible layer, and not its adjacent solid shells."); - def->cli = "top-fill-pattern|external-fill-pattern|solid-fill-pattern=s"; + def->cli = "top-fill-pattern|external-fill-pattern|solid-fill-pattern"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("rectilinear"); def->enum_values.push_back("concentric"); @@ -419,9 +405,9 @@ void PrintConfigDef::init_fff_params() def = this->add("bottom_fill_pattern", coEnum); *def = *def_top_fill_pattern; - def->label = L("Bottom Pattern"); + def->label = L("Bottom fill pattern"); def->tooltip = L("Fill pattern for bottom infill. This only affects the bottom external visible layer, and not its adjacent solid shells."); - def->cli = "bottom-fill-pattern|external-fill-pattern|solid-fill-pattern=s"; + def->cli = "bottom-fill-pattern|external-fill-pattern|solid-fill-pattern"; def->default_value = new ConfigOptionEnum(ipRectilinear); def = this->add("external_perimeter_extrusion_width", coFloatOrPercent); @@ -431,7 +417,6 @@ void PrintConfigDef::init_fff_params() "If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. " "If expressed as percentage (for example 200%), it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "external-perimeter-extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -442,7 +427,6 @@ void PrintConfigDef::init_fff_params() "If expressed as percentage (for example: 80%) it will be calculated " "on the perimeters speed setting above. Set to zero for auto."); def->sidetext = L("mm/s or %"); - def->cli = "external-perimeter-speed=s"; def->ratio_over = "perimeter_speed"; def->min = 0; def->mode = comAdvanced; @@ -453,7 +437,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Layers and Perimeters"); def->tooltip = L("Print contour perimeters from the outermost one to the innermost one " "instead of the default inverse order."); - def->cli = "external-perimeters-first!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -463,7 +446,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Add more perimeters when needed for avoiding gaps in sloping walls. " "Slic3r keeps adding perimeters, until more than 70% of the loop immediately above " "is supported."); - def->cli = "extra-perimeters!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(true); @@ -473,7 +455,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Extruders"); def->tooltip = L("The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support extruders."); - def->cli = "extruder=i"; def->min = 0; // 0 = inherit defaults def->enum_labels.push_back("default"); // override label for item 0 def->enum_labels.push_back("1"); @@ -489,7 +470,6 @@ void PrintConfigDef::init_fff_params() "and it represents the maximum depth the extruder can peek before colliding with " "other printed objects."); def->sidetext = L("mm"); - def->cli = "extruder-clearance-height=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(20); @@ -501,7 +481,6 @@ void PrintConfigDef::init_fff_params() "This setting is used to check for collisions and to display the graphical preview " "in the plater."); def->sidetext = L("mm"); - def->cli = "extruder-clearance-radius=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(20); @@ -509,7 +488,6 @@ void PrintConfigDef::init_fff_params() def = this->add("extruder_colour", coStrings); def->label = L("Extruder Color"); def->tooltip = L("This is only used in the Slic3r interface as a visual help."); - def->cli = "extruder-color=s@"; def->gui_type = "color"; // Empty string means no color assigned yet. def->default_value = new ConfigOptionStrings { "" }; @@ -521,7 +499,6 @@ void PrintConfigDef::init_fff_params() "with respect to the first one. It expects positive coordinates (they will be subtracted " "from the XY coordinate)."); def->sidetext = L("mm"); - def->cli = "extruder-offset=s@"; def->mode = comAdvanced; def->default_value = new ConfigOptionPoints { Vec2d(0,0) }; @@ -529,7 +506,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Extrusion axis"); def->tooltip = L("Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)."); - def->cli = "extrusion-axis=s"; def->default_value = new ConfigOptionString("E"); def = this->add("extrusion_multiplier", coFloats); @@ -538,7 +514,6 @@ void PrintConfigDef::init_fff_params() "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this more, " "check filament diameter and your firmware E steps."); - def->cli = "extrusion-multiplier=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 1. }; @@ -550,7 +525,6 @@ void PrintConfigDef::init_fff_params() "(see the tooltips for perimeter extrusion width, infill extrusion width etc). " "If expressed as percentage (for example: 230%), it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for auto)"); - def->cli = "extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -558,7 +532,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Keep fan always on"); def->tooltip = L("If this is enabled, fan will never be disabled and will be kept running at least " "at its minimum speed. Useful for PLA, harmful for ABS."); - def->cli = "fan-always-on!"; def->default_value = new ConfigOptionBools { false }; def = this->add("fan_below_layer_time", coInts); @@ -566,7 +539,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("If layer print time is estimated below this number of seconds, fan will be enabled " "and its speed will be calculated by interpolating the minimum and maximum speeds."); def->sidetext = L("approximate seconds"); - def->cli = "fan-below-layer-time=i@"; def->width = 60; def->min = 0; def->max = 1000; @@ -576,14 +548,12 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_colour", coStrings); def->label = L("Color"); def->tooltip = L("This is only used in the Slic3r interface as a visual help."); - def->cli = "filament-color=s@"; def->gui_type = "color"; def->default_value = new ConfigOptionStrings { "#29B2B2" }; def = this->add("filament_notes", coStrings); def->label = L("Filament notes"); def->tooltip = L("You can put your notes regarding the filament here."); - def->cli = "filament-notes=s@"; def->multiline = true; def->full_width = true; def->height = 130; @@ -596,7 +566,6 @@ void PrintConfigDef::init_fff_params() "speed of a print to the minimum of print and filament volumetric speed. " "Set to zero for no limit."); def->sidetext = L("mm³/s"); - def->cli = "filament-max-volumetric-speed=f@"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -605,7 +574,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Loading speed"); def->tooltip = L("Speed used for loading the filament on the wipe tower. "); def->sidetext = L("mm/s"); - def->cli = "filament-loading-speed=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 28. }; @@ -614,7 +582,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Loading speed at the start"); def->tooltip = L("Speed used at the very beginning of loading phase. "); def->sidetext = L("mm/s"); - def->cli = "filament-loading-speed-start=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 3. }; @@ -624,7 +591,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Speed used for unloading the filament on the wipe tower (does not affect " " initial part of unloading just after ramming). "); def->sidetext = L("mm/s"); - def->cli = "filament-unloading-speed=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 90. }; @@ -633,7 +599,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Unloading speed at the start"); def->tooltip = L("Speed used for unloading the tip of the filament immediately after ramming. "); def->sidetext = L("mm/s"); - def->cli = "filament-unloading-speed-start=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 100. }; @@ -644,7 +609,6 @@ void PrintConfigDef::init_fff_params() "May help to get reliable toolchanges with flexible materials " "that may need more time to shrink to original dimensions. "); def->sidetext = L("s"); - def->cli = "filament-toolchange-delay=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 0. }; @@ -653,7 +617,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Number of cooling moves"); def->tooltip = L("Filament is cooled by being moved back and forth in the " "cooling tubes. Specify desired number of these moves "); - def->cli = "filament-cooling-moves=i@"; def->max = 0; def->max = 20; def->mode = comExpert; @@ -662,7 +625,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_cooling_initial_speed", coFloats); def->label = L("Speed of the first cooling move"); def->tooltip = L("Cooling moves are gradually accelerating beginning at this speed. "); - def->cli = "filament-cooling-initial-speed=f@"; def->sidetext = L("mm/s"); def->min = 0; def->mode = comExpert; @@ -674,7 +636,6 @@ void PrintConfigDef::init_fff_params() "the nozzle may not be known, and the filament pressure is likely not yet stable. " "Before purging the print head into an infill or a sacrificial object, Slic3r will always prime " "this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably."); - def->cli = "filament-minimal-purge-on-wipe-tower=f@"; def->sidetext = L("mm³"); def->min = 0; def->mode = comExpert; @@ -683,7 +644,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_cooling_final_speed", coFloats); def->label = L("Speed of the last cooling move"); def->tooltip = L("Cooling moves are gradually accelerating towards this speed. "); - def->cli = "filament-cooling-final-speed=f@"; def->sidetext = L("mm/s"); def->min = 0; def->mode = comExpert; @@ -692,7 +652,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_load_time", coFloats); def->label = L("Filament load time"); def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."); - def->cli = "filament-load-time=i@"; def->sidetext = L("s"); def->min = 0; def->mode = comExpert; @@ -701,7 +660,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_ramming_parameters", coStrings); def->label = L("Ramming parameters"); def->tooltip = L("This string is edited by RammingDialog and contains ramming specific parameters "); - def->cli = "filament-ramming-parameters=s@"; def->mode = comExpert; def->default_value = new ConfigOptionStrings { "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|" " 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" }; @@ -709,7 +667,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_unload_time", coFloats); def->label = L("Filament unload time"); def->tooltip = L("Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator."); - def->cli = "filament-unload-time=i@"; def->sidetext = L("s"); def->min = 0; def->mode = comExpert; @@ -720,7 +677,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Enter your filament diameter here. Good precision is required, so use a caliper " "and do multiple measurements along the filament, then compute the average."); def->sidetext = L("mm"); - def->cli = "filament-diameter=f@"; def->min = 0; def->default_value = new ConfigOptionFloats { 3. }; @@ -730,14 +686,12 @@ void PrintConfigDef::init_fff_params() "A decent way is to weigh a known length of filament and compute the ratio " "of the length to volume. Better is to calculate the volume directly through displacement."); def->sidetext = L("g/cm³"); - def->cli = "filament-density=f@"; def->min = 0; def->default_value = new ConfigOptionFloats { 0. }; def = this->add("filament_type", coStrings); def->label = L("Filament type"); def->tooltip = L("The filament material type for use in custom G-codes."); - def->cli = "filament_type=s@"; def->gui_type = "f_enum_open"; def->gui_flags = "show_value"; def->enum_values.push_back("PLA"); @@ -755,7 +709,6 @@ void PrintConfigDef::init_fff_params() def = this->add("filament_soluble", coBools); def->label = L("Soluble material"); def->tooltip = L("Soluble material is most likely used for a soluble support."); - def->cli = "filament-soluble!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBools { false }; @@ -763,12 +716,12 @@ void PrintConfigDef::init_fff_params() def->label = L("Cost"); def->tooltip = L("Enter your filament cost per kg here. This is only for statistical information."); def->sidetext = L("money/kg"); - def->cli = "filament-cost=f@"; def->min = 0; def->default_value = new ConfigOptionFloats { 0. }; def = this->add("filament_settings_id", coStrings); def->default_value = new ConfigOptionStrings { "" }; + def->cli = ConfigOptionDef::nocli; def = this->add("fill_angle", coFloat); def->label = L("Fill angle"); @@ -777,7 +730,6 @@ void PrintConfigDef::init_fff_params() "Bridges will be infilled using the best direction Slic3r can detect, so this setting " "does not affect them."); def->sidetext = L("°"); - def->cli = "fill-angle=f"; def->min = 0; def->max = 360; def->mode = comAdvanced; @@ -790,7 +742,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Infill"); def->tooltip = L("Density of internal infill, expressed in the range 0% - 100%."); def->sidetext = L("%"); - def->cli = "fill-density=s"; def->min = 0; def->max = 100; def->enum_values.push_back("0"); @@ -827,7 +778,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Fill pattern"); def->category = L("Infill"); def->tooltip = L("Fill pattern for general low-density infill."); - def->cli = "fill-pattern=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("rectilinear"); def->enum_values.push_back("grid"); @@ -862,7 +812,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This is the acceleration your printer will use for first layer. Set zero " "to disable acceleration control for first layer."); def->sidetext = L("mm/s²"); - def->cli = "first-layer-acceleration=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -871,7 +820,6 @@ void PrintConfigDef::init_fff_params() def->label = L("First layer"); def->tooltip = L("Heated build plate temperature for the first layer. Set this to zero to disable " "bed temperature control commands in the output."); - def->cli = "first-layer-bed-temperature=i@"; def->max = 0; def->max = 300; def->default_value = new ConfigOptionInts { 0 }; @@ -884,7 +832,6 @@ void PrintConfigDef::init_fff_params() "as percentage (for example 120%) it will be computed over first layer height. " "If set to zero, it will use the default extrusion width."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "first-layer-extrusion-width=s"; def->ratio_over = "first_layer_height"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(200, true); @@ -897,7 +844,6 @@ void PrintConfigDef::init_fff_params() "This can be expressed as an absolute value or as a percentage (for example: 150%) " "over the default layer height."); def->sidetext = L("mm or %"); - def->cli = "first-layer-height=s"; def->ratio_over = "layer_height"; def->default_value = new ConfigOptionFloatOrPercent(0.35, false); @@ -907,7 +853,6 @@ void PrintConfigDef::init_fff_params() "of the first layer, regardless of their type. If expressed as a percentage " "(for example: 40%) it will scale the default speeds."); def->sidetext = L("mm/s or %"); - def->cli = "first-layer-speed=s"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(30, false); @@ -916,7 +861,6 @@ void PrintConfigDef::init_fff_params() def->label = L("First layer"); def->tooltip = L("Extruder temperature for first layer. If you want to control temperature manually " "during print, set this to zero to disable temperature control commands in the output file."); - def->cli = "first-layer-temperature=i@"; def->min = 0; def->max = max_temp; def->default_value = new ConfigOptionInts { 200 }; @@ -927,7 +871,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Speed for filling small gaps using short zigzag moves. Keep this reasonably low " "to avoid too much shaking and resonance issues. Set zero to disable gaps filling."); def->sidetext = L("mm/s"); - def->cli = "gap-fill-speed=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(20); @@ -937,7 +880,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Enable this to get a commented G-code file, with each line explained by a descriptive text. " "If you print from SD card, the additional weight of the file could make your firmware " "slow down."); - def->cli = "gcode-comments!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(0); @@ -946,7 +888,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Some G/M-code commands, including temperature control and others, are not universal. " "Set this option to your printer's firmware to get a compatible output. " "The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all."); - def->cli = "gcode-flavor=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("reprap"); def->enum_values.push_back("repetier"); @@ -976,7 +917,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = "Enable this to add comments into the G-Code labeling print moves with what object they belong to," " which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with " "Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill."; - def->cli = "gcode-label-objects!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(0); @@ -985,7 +925,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("It may be beneficial to increase the extruder motor current during the filament exchange" " sequence to allow for rapid ramming feed rates and to overcome resistance when loading" " a filament with an ugly shaped tip."); - def->cli = "high-current-on-filament-swap!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(0); @@ -994,7 +933,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This is the acceleration your printer will use for infill. Set zero to disable " "acceleration control for infill."); def->sidetext = L("mm/s²"); - def->cli = "infill-acceleration=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1005,7 +943,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This feature allows to combine infill and speed up your print by extruding thicker " "infill layers while preserving thin perimeters, thus accuracy."); def->sidetext = L("layers"); - def->cli = "infill-every-layers=i"; def->full_label = L("Combine infill every n layers"); def->min = 1; def->mode = comAdvanced; @@ -1015,7 +952,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Infill extruder"); def->category = L("Extruders"); def->tooltip = L("The extruder to use when printing infill."); - def->cli = "infill-extruder=i"; def->min = 1; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -1028,14 +964,12 @@ void PrintConfigDef::init_fff_params() "You may want to use fatter extrudates to speed up the infill and make your parts stronger. " "If expressed as percentage (for example 90%) it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "infill-extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); def = this->add("infill_first", coBool); def->label = L("Infill before perimeters"); def->tooltip = L("This option will switch the print order of perimeters and infill, making the latter first."); - def->cli = "infill-first!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -1045,7 +979,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This option will limit infill to the areas actually needed for supporting ceilings " "(it will act as internal support material). If enabled, slows down the G-code generation " "due to the multiple checks involved."); - def->cli = "infill-only-where-needed!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(false); @@ -1056,7 +989,6 @@ void PrintConfigDef::init_fff_params() "Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed " "as percentage (example: 15%) it is calculated over perimeter extrusion width."); def->sidetext = L("mm or %"); - def->cli = "infill-overlap=s"; def->ratio_over = "perimeter_extrusion_width"; def->mode = comExpert; def->default_value = new ConfigOptionFloatOrPercent(25, true); @@ -1066,7 +998,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Speed"); def->tooltip = L("Speed for printing the internal fill. Set to zero for auto."); def->sidetext = L("mm/s"); - def->cli = "infill-speed=f"; def->aliases = { "print_feed_rate", "infill_feed_rate" }; def->min = 0; def->mode = comAdvanced; @@ -1078,18 +1009,19 @@ void PrintConfigDef::init_fff_params() def->full_width = true; def->height = 50; def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; // The following value is to be stored into the project file (AMF, 3MF, Config ...) // and it contains a sum of "inherits" values over the print and filament profiles. def = this->add("inherits_cummulative", coStrings); def->default_value = new ConfigOptionStrings(); + def->cli = ConfigOptionDef::nocli; def = this->add("interface_shells", coBool); def->label = L("Interface shells"); def->tooltip = L("Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual soluble " "support material."); - def->cli = "interface-shells!"; def->category = L("Layers and Perimeters"); def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -1099,7 +1031,7 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can use " "placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]."); - def->cli = "after-layer-gcode|layer-gcode=s"; + def->cli = "after-layer-gcode|layer-gcode"; def->multiline = true; def->full_width = true; def->height = 50; @@ -1219,7 +1151,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Max"); def->tooltip = L("This setting represents the maximum speed of your fan."); def->sidetext = L("%"); - def->cli = "max-fan-speed=i@"; def->min = 0; def->max = 100; def->mode = comExpert; @@ -1232,7 +1163,6 @@ void PrintConfigDef::init_fff_params() "is 75% of the extrusion width to achieve reasonable inter-layer adhesion. " "If set to 0, layer height is limited to 75% of the nozzle diameter."); def->sidetext = L("mm"); - def->cli = "max-layer-height=f@"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -1243,7 +1173,6 @@ void PrintConfigDef::init_fff_params() "in order to keep constant extruder pressure. This experimental setting is used " "to set the highest print speed you want to allow."); def->sidetext = L("mm/s"); - def->cli = "max-print-speed=f"; def->min = 1; def->mode = comExpert; def->default_value = new ConfigOptionFloat(80); @@ -1253,7 +1182,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This experimental setting is used to set the maximum volumetric speed your " "extruder supports."); def->sidetext = L("mm³/s"); - def->cli = "max-volumetric-speed=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1266,7 +1194,6 @@ void PrintConfigDef::init_fff_params() "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) " "to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."); def->sidetext = L("mm³/s²"); - def->cli = "max-volumetric-extrusion-rate-slope-positive=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1278,7 +1205,6 @@ void PrintConfigDef::init_fff_params() "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/s) " "to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."); def->sidetext = L("mm³/s²"); - def->cli = "max-volumetric-extrusion-rate-slope-negative=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1288,7 +1214,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Min"); def->tooltip = L("This setting represents the minimum PWM your fan needs to work."); def->sidetext = L("%"); - def->cli = "min-fan-speed=i@"; def->min = 0; def->max = 100; def->mode = comExpert; @@ -1299,7 +1224,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This is the lowest printable layer height for this extruder and limits " "the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm."); def->sidetext = L("mm"); - def->cli = "min-layer-height=f@"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0.07 }; @@ -1308,7 +1232,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Min print speed"); def->tooltip = L("Slic3r will not scale speed down below this speed."); def->sidetext = L("mm/s"); - def->cli = "min-print-speed=f@"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 10. }; @@ -1319,7 +1242,6 @@ void PrintConfigDef::init_fff_params() "the specified amount of filament on the bottom layer. For multi-extruder machines, " "this minimum applies to each extruder."); def->sidetext = L("mm"); - def->cli = "min-skirt-length=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1328,7 +1250,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Configuration notes"); def->tooltip = L("You can put here your personal notes. This text will be added to the G-code " "header comments."); - def->cli = "notes=s"; def->multiline = true; def->full_width = true; def->height = 130; @@ -1339,14 +1260,12 @@ void PrintConfigDef::init_fff_params() def->label = L("Nozzle diameter"); def->tooltip = L("This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"); def->sidetext = L("mm"); - def->cli = "nozzle-diameter=f@"; def->default_value = new ConfigOptionFloats { 0.5 }; def = this->add("host_type", coEnum); def->label = L("Host Type"); def->tooltip = L("Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host."); - def->cli = "host-type=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("octoprint"); def->enum_values.push_back("duet"); @@ -1359,7 +1278,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Only retract when crossing perimeters"); def->tooltip = L("Disables retraction when the travel path does not exceed the upper layer's perimeters " "(and thus any ooze will be probably invisible)."); - def->cli = "only-retract-when-crossing-perimeters!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(true); @@ -1368,7 +1286,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This option will drop the temperature of the inactive extruders to prevent oozing. " "It will enable a tall skirt automatically and move extruders outside such " "skirt when changing temperatures."); - def->cli = "ooze-prevention!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -1378,7 +1295,6 @@ void PrintConfigDef::init_fff_params() "For example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], [input_filename], " "[input_filename_base]."); - def->cli = "output-filename-format=s"; def->full_width = true; def->mode = comExpert; def->default_value = new ConfigOptionString("[input_filename_base]"); @@ -1388,7 +1304,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Layers and Perimeters"); def->tooltip = L("Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan."); - def->cli = "overhangs!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(true); @@ -1397,7 +1312,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. "); def->sidetext = L("mm"); - def->cli = "parking_pos_retraction=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(92.f); @@ -1408,7 +1322,6 @@ void PrintConfigDef::init_fff_params() "is exactly the same as it was moved back during unload. When positive, it is loaded further, " " if negative, the loading move is shorter than unloading. "); def->sidetext = L("mm"); - def->cli = "extra_loading_move=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(-2.f); @@ -1418,7 +1331,6 @@ void PrintConfigDef::init_fff_params() "A high value like 9000 usually gives good results if your hardware is up to the job. " "Set zero to disable acceleration control for perimeters."); def->sidetext = L("mm/s²"); - def->cli = "perimeter-acceleration=f"; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1426,7 +1338,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Perimeter extruder"); def->category = L("Extruders"); def->tooltip = L("The extruder to use when printing perimeters and brim. First extruder is 1."); - def->cli = "perimeter-extruder=i"; def->aliases = { "perimeters_extruder" }; def->min = 1; def->mode = comAdvanced; @@ -1440,7 +1351,6 @@ void PrintConfigDef::init_fff_params() "If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. " "If expressed as percentage (for example 200%) it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "perimeter-extrusion-width=s"; def->aliases = { "perimeters_extrusion_width" }; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -1450,7 +1360,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Speed"); def->tooltip = L("Speed for perimeters (contours, aka vertical shells). Set to zero for auto."); def->sidetext = L("mm/s"); - def->cli = "perimeter-speed=f"; def->aliases = { "perimeter_feed_rate" }; def->min = 0; def->mode = comAdvanced; @@ -1464,7 +1373,6 @@ void PrintConfigDef::init_fff_params() "sloping surfaces which benefit from a higher number of perimeters " "if the Extra Perimeters option is enabled."); def->sidetext = L("(minimum)"); - def->cli = "perimeters=i"; def->aliases = { "perimeter_offsets" }; def->min = 0; def->default_value = new ConfigOptionInt(3); @@ -1475,7 +1383,6 @@ void PrintConfigDef::init_fff_params() "just list their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first argument, " "and they can access the Slic3r config settings by reading environment variables."); - def->cli = "post-process=s@"; def->gui_flags = "serialized"; def->multiline = true; def->full_width = true; @@ -1487,11 +1394,11 @@ void PrintConfigDef::init_fff_params() def->label = L("Printer type"); def->tooltip = L("Type of the printer."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("printer_notes", coString); def->label = L("Printer notes"); def->tooltip = L("You can put your notes regarding the printer here."); - def->cli = "printer-notes=s"; def->multiline = true; def->full_width = true; def->height = 130; @@ -1502,17 +1409,21 @@ void PrintConfigDef::init_fff_params() def->label = L("Printer vendor"); def->tooltip = L("Name of the printer vendor."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("printer_variant", coString); def->label = L("Printer variant"); def->tooltip = L("Name of the printer variant. For example, the printer variants may be differentiated by a nozzle diameter."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("print_settings_id", coString); def->default_value = new ConfigOptionString(""); + def->cli = ConfigOptionDef::nocli; def = this->add("printer_settings_id", coString); def->default_value = new ConfigOptionString(""); + def->cli = ConfigOptionDef::nocli; def = this->add("raft_layers", coInt); def->label = L("Raft layers"); @@ -1520,7 +1431,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("The object will be raised by this number of layers, and support material " "will be generated under it."); def->sidetext = L("layers"); - def->cli = "raft-layers=i"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(0); @@ -1532,7 +1442,6 @@ void PrintConfigDef::init_fff_params() "more detail than printers can render. Set to zero to disable any simplification " "and use full resolution from input."); def->sidetext = L("mm"); - def->cli = "resolution=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -1541,7 +1450,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Minimum travel after retraction"); def->tooltip = L("Retraction is not triggered when travel moves are shorter than this length."); def->sidetext = L("mm"); - def->cli = "retract-before-travel=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 2. }; @@ -1550,14 +1458,12 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement."); def->sidetext = L("%"); - def->cli = "retract-before-wipe=s@"; def->mode = comAdvanced; def->default_value = new ConfigOptionPercents { 0. }; def = this->add("retract_layer_change", coBools); def->label = L("Retract on layer change"); def->tooltip = L("This flag enforces a retraction whenever a Z move is done."); - def->cli = "retract-layer-change!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBools { false }; @@ -1567,7 +1473,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("When retraction is triggered, filament is pulled back by the specified amount " "(the length is measured on raw filament, before it enters the extruder)."); def->sidetext = L("mm (zero to disable)"); - def->cli = "retract-length=f@"; def->default_value = new ConfigOptionFloats { 2. }; def = this->add("retract_length_toolchange", coFloats); @@ -1577,7 +1482,6 @@ void PrintConfigDef::init_fff_params() "by the specified amount (the length is measured on raw filament, before it enters " "the extruder)."); def->sidetext = L("mm (zero to disable)"); - def->cli = "retract-length-toolchange=f@"; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 10. }; @@ -1587,7 +1491,6 @@ void PrintConfigDef::init_fff_params() "is triggered. When using multiple extruders, only the setting for the first extruder " "will be considered."); def->sidetext = L("mm"); - def->cli = "retract-lift=f@"; def->default_value = new ConfigOptionFloats { 0. }; def = this->add("retract_lift_above", coFloats); @@ -1596,7 +1499,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("If you set this to a positive value, Z lift will only take place above the specified " "absolute Z. You can tune this setting for skipping lift on the first layers."); def->sidetext = L("mm"); - def->cli = "retract-lift-above=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -1607,7 +1509,6 @@ void PrintConfigDef::init_fff_params() "the specified absolute Z. You can tune this setting for limiting lift " "to the first layers."); def->sidetext = L("mm"); - def->cli = "retract-lift-below=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -1616,7 +1517,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("When the retraction is compensated after the travel move, the extruder will push " "this additional amount of filament. This setting is rarely needed."); def->sidetext = L("mm"); - def->cli = "retract-restart-extra=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -1625,7 +1525,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("When the retraction is compensated after changing tool, the extruder will push " "this additional amount of filament."); def->sidetext = L("mm"); - def->cli = "retract-restart-extra-toolchange=f@"; def->mode = comExpert; def->default_value = new ConfigOptionFloats { 0. }; @@ -1634,7 +1533,6 @@ void PrintConfigDef::init_fff_params() def->full_label = L("Retraction Speed"); def->tooltip = L("The speed for retractions (it only applies to the extruder motor)."); def->sidetext = L("mm/s"); - def->cli = "retract-speed=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 40. }; @@ -1644,7 +1542,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("The speed for loading of a filament into extruder after retraction " "(it only applies to the extruder motor). If left to zero, the retraction speed is used."); def->sidetext = L("mm/s"); - def->cli = "retract-speed=f@"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloats { 0. }; @@ -1652,7 +1549,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Seam position"); def->category = L("Layers and Perimeters"); def->tooltip = L("Position of perimeters starting points."); - def->cli = "seam-position=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("random"); def->enum_values.push_back("nearest"); @@ -1672,7 +1568,6 @@ void PrintConfigDef::init_fff_params() def->sidetext = L("°"); def->full_label = L("Preferred direction of the seam"); def->tooltip = L("Seam preferred direction"); - def->cli = "seam-preferred-direction=f"; def->min = 0; def->max = 360; def->default_value = new ConfigOptionFloat(0); @@ -1683,7 +1578,6 @@ void PrintConfigDef::init_fff_params() def->sidetext = L("°"); def->full_label = L("Seam preferred direction jitter"); def->tooltip = L("Preferred direction of the seam - jitter"); - def->cli = "seam-preferred-direction-jitter=f"; def->min = 0; def->max = 360; def->default_value = new ConfigOptionFloat(30); @@ -1694,7 +1588,6 @@ void PrintConfigDef::init_fff_params() def->label = ""; def->full_label = L("Serial port"); def->tooltip = L("USB/serial port for printer connection."); - def->cli = "serial-port=s"; def->width = 200; def->default_value = new ConfigOptionString(""); @@ -1703,7 +1596,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Speed"); def->full_label = L("Serial port speed"); def->tooltip = L("Speed (baud) of USB/serial port for printer connection."); - def->cli = "serial-speed=i"; def->min = 1; def->max = 300000; def->enum_values.push_back("115200"); @@ -1716,7 +1608,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion."); def->sidetext = L("mm"); - def->cli = "skirt-distance=f"; def->min = 0; def->default_value = new ConfigOptionFloat(6); @@ -1725,7 +1616,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts."); def->sidetext = L("layers"); - def->cli = "skirt-height=i"; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -1735,7 +1625,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Number of loops for the skirt. If the Minimum Extrusion Length option is set, " "the number of loops might be greater than the one configured here. Set this to zero " "to disable skirt completely."); - def->cli = "skirts=i"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -1745,7 +1634,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value."); def->sidetext = L("approximate seconds"); - def->cli = "slowdown-below-layer-time=i@"; def->width = 60; def->min = 0; def->max = 1000; @@ -1759,7 +1647,6 @@ void PrintConfigDef::init_fff_params() "(usually holes). If expressed as percentage (for example: 80%) it will be calculated " "on the perimeters speed setting above. Set to zero for auto."); def->sidetext = L("mm/s or %"); - def->cli = "small-perimeter-speed=s"; def->ratio_over = "perimeter_speed"; def->min = 0; def->mode = comAdvanced; @@ -1770,7 +1657,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Infill"); def->tooltip = L("Force solid infill for regions having a smaller area than the specified threshold."); def->sidetext = L("mm²"); - def->cli = "solid-infill-below-area=f"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionFloat(70); @@ -1779,7 +1665,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Solid infill extruder"); def->category = L("Extruders"); def->tooltip = L("The extruder to use when printing solid infill."); - def->cli = "solid-infill-extruder=i"; def->min = 1; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -1792,7 +1677,6 @@ void PrintConfigDef::init_fff_params() "Slic3r will automatically choose the maximum possible number of layers " "to combine according to nozzle diameter and layer height."); def->sidetext = L("layers"); - def->cli = "solid-infill-every-layers=i"; def->min = 0; def->mode = comExpert; def->default_value = new ConfigOptionInt(0); @@ -1804,7 +1688,6 @@ void PrintConfigDef::init_fff_params() "If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. " "If expressed as percentage (for example 90%) it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "solid-infill-extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -1815,7 +1698,6 @@ void PrintConfigDef::init_fff_params() "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto."); def->sidetext = L("mm/s or %"); - def->cli = "solid-infill-speed=s"; def->ratio_over = "infill_speed"; def->aliases = { "solid_infill_feed_rate" }; def->min = 0; @@ -1825,7 +1707,6 @@ void PrintConfigDef::init_fff_params() def = this->add("solid_layers", coInt); def->label = L("Solid layers"); def->tooltip = L("Number of solid layers to generate on top and bottom surfaces."); - def->cli = "solid-layers=i"; def->shortcut.push_back("top_solid_layers"); def->shortcut.push_back("bottom_solid_layers"); def->min = 0; @@ -1837,7 +1718,6 @@ void PrintConfigDef::init_fff_params() "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. " "It won't work when printing more than an object."); - def->cli = "spiral-vase!"; def->default_value = new ConfigOptionBool(false); def = this->add("standby_temperature_delta", coInt); @@ -1845,7 +1725,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Temperature difference to be applied when an extruder is not active. " "Enables a full-height \"sacrificial\" skirt on which the nozzles are periodically wiped."); def->sidetext = "∆°C"; - def->cli = "standby-temperature-delta=i"; def->min = -max_temp; def->max = max_temp; def->mode = comExpert; @@ -1860,7 +1739,6 @@ void PrintConfigDef::init_fff_params() "the order of heating commands and other custom actions. Note that you can use " "placeholder variables for all Slic3r settings, so you can put " "a \"M109 S[first_layer_temperature]\" command wherever you want."); - def->cli = "start-gcode=s"; def->multiline = true; def->full_width = true; def->height = 120; @@ -1877,7 +1755,6 @@ void PrintConfigDef::init_fff_params() "for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command " "wherever you want. If you have multiple extruders, the gcode is processed " "in extruder order."); - def->cli = "start-filament-gcode=s@"; def->multiline = true; def->full_width = true; def->height = 120; @@ -1887,14 +1764,12 @@ void PrintConfigDef::init_fff_params() def = this->add("single_extruder_multi_material", coBool); def->label = L("Single Extruder Multi Material"); def->tooltip = L("The printer multiplexes filaments into a single hot end."); - def->cli = "single-extruder-multi-material!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); def = this->add("single_extruder_multi_material_priming", coBool); def->label = L("Prime all printing extruders"); def->tooltip = L("If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."); - def->cli = "single-extruder-multi-material-priming!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(true); @@ -1902,7 +1777,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Generate support material"); def->category = L("Support material"); def->tooltip = L("Enable support material generation."); - def->cli = "support-material!"; def->default_value = new ConfigOptionBool(false); def = this->add("support_material_auto", coBool); @@ -1910,7 +1784,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("If checked, supports will be generated automatically based on the overhang threshold value."\ " If unchecked, supports will be generated inside the \"Support Enforcer\" volumes only."); - def->cli = "support-material-auto!"; def->mode = comSimple; def->default_value = new ConfigOptionBool(true); @@ -1920,7 +1793,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width."); def->sidetext = L("mm or %"); - def->cli = "support-material-xy-spacing=s"; def->ratio_over = "external_perimeter_extrusion_width"; def->min = 0; def->mode = comAdvanced; @@ -1932,7 +1804,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Use this setting to rotate the support material pattern on the horizontal plane."); def->sidetext = L("°"); - def->cli = "support-material-angle=f"; def->min = 0; def->max = 359; def->mode = comExpert; @@ -1942,7 +1813,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Support on build plate only"); def->category = L("Support material"); def->tooltip = L("Only create support if it lies on a build plate. Don't create support on a print."); - def->cli = "support-material-buildplate-only!"; def->mode = comSimple; def->default_value = new ConfigOptionBool(false); @@ -1954,7 +1824,6 @@ void PrintConfigDef::init_fff_params() "Setting this to 0 will also prevent Slic3r from using bridge flow and speed " "for the first object layer."); def->sidetext = L("mm"); - def->cli = "support-material-contact-distance=f"; // def->min = 0; def->enum_values.push_back("0"); def->enum_values.push_back("0.2"); @@ -1971,7 +1840,6 @@ void PrintConfigDef::init_fff_params() "of any angle threshold. This is useful for getting more adhesion of objects " "having a very thin or poor footprint on the build plate."); def->sidetext = L("layers"); - def->cli = "support-material-enforce-layers=f"; def->full_label = L("Enforce support for the first n layers"); def->min = 0; def->mode = comExpert; @@ -1982,7 +1850,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Extruders"); def->tooltip = L("The extruder to use when printing support material, raft and skirt " "(1+, 0 to use the current extruder to minimize tool changes)."); - def->cli = "support-material-extruder=i"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -1994,7 +1861,6 @@ void PrintConfigDef::init_fff_params() "If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. " "If expressed as percentage (for example 90%) it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "support-material-extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -2002,7 +1868,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Interface loops"); def->category = L("Support material"); def->tooltip = L("Cover the top contact layer of the supports with loops. Disabled by default."); - def->cli = "support-material-interface-contact-loops!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -2011,7 +1876,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Extruders"); def->tooltip = L("The extruder to use when printing support material interface " "(1+, 0 to use the current extruder to minimize tool changes). This affects raft too."); - def->cli = "support-material-interface-extruder=i"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(1); @@ -2021,7 +1885,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Number of interface layers to insert between the object(s) and support material."); def->sidetext = L("layers"); - def->cli = "support-material-interface-layers=i"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionInt(3); @@ -2031,7 +1894,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Spacing between interface lines. Set zero to get a solid interface."); def->sidetext = L("mm"); - def->cli = "support-material-interface-spacing=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0); @@ -2042,7 +1904,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Speed for printing support material interface layers. If expressed as percentage " "(for example 50%) it will be calculated over support material speed."); def->sidetext = L("mm/s or %"); - def->cli = "support-material-interface-speed=s"; def->ratio_over = "support_material_speed"; def->min = 0; def->mode = comAdvanced; @@ -2052,7 +1913,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Pattern"); def->category = L("Support material"); def->tooltip = L("Pattern used to generate support material."); - def->cli = "support-material-pattern=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("rectilinear"); def->enum_values.push_back("rectilinear-grid"); @@ -2068,7 +1928,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Spacing between support material lines."); def->sidetext = L("mm"); - def->cli = "support-material-spacing=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(2.5); @@ -2078,7 +1937,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Speed for printing support material."); def->sidetext = L("mm/s"); - def->cli = "support-material-speed=f"; def->min = 0; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(60); @@ -2088,7 +1946,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Synchronize support layers with the object print layers. This is useful " "with multi-material printers, where the extruder switch is expensive."); - def->cli = "support-material-synchronize-layers!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -2101,7 +1958,6 @@ void PrintConfigDef::init_fff_params() "that you can print without support material. Set to zero for automatic detection " "(recommended)."); def->sidetext = L("°"); - def->cli = "support-material-threshold=i"; def->min = 0; def->max = 90; def->mode = comAdvanced; @@ -2112,7 +1968,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Support material"); def->tooltip = L("Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove."); - def->cli = "support-material-with-sheath!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(true); @@ -2120,7 +1975,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Other layers"); def->tooltip = L("Extruder temperature for layers after the first one. Set this to zero to disable " "temperature control commands in the output."); - def->cli = "temperature=i@"; def->full_label = L("Temperature"); def->min = 0; def->max = max_temp; @@ -2131,7 +1985,6 @@ void PrintConfigDef::init_fff_params() def->category = L("Layers and Perimeters"); def->tooltip = L("Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)."); - def->cli = "thin-walls!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(true); @@ -2139,12 +1992,12 @@ void PrintConfigDef::init_fff_params() def->label = L("Threads"); def->tooltip = L("Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors."); - def->cli = "threads|j=i"; def->readonly = true; def->min = 1; { int threads = (unsigned int)boost::thread::hardware_concurrency(); def->default_value = new ConfigOptionInt(threads > 0 ? threads : 2); + def->cli == ConfigOptionDef::nocli; } def = this->add("toolchange_gcode", coString); @@ -2152,7 +2005,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This custom code is inserted right before every extruder change. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [previous_extruder] and [next_extruder]."); - def->cli = "toolchange-gcode=s"; def->multiline = true; def->full_width = true; def->height = 50; @@ -2167,7 +2019,6 @@ void PrintConfigDef::init_fff_params() "If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. " "If expressed as percentage (for example 90%) it will be computed over layer height."); def->sidetext = L("mm or % (leave 0 for default)"); - def->cli = "top-infill-extrusion-width=s"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloatOrPercent(0, false); @@ -2180,7 +2031,6 @@ void PrintConfigDef::init_fff_params() "as a percentage (for example: 80%) over the solid infill speed above. " "Set to zero for auto."); def->sidetext = L("mm/s or %"); - def->cli = "top-solid-infill-speed=s"; def->ratio_over = "solid_infill_speed"; def->min = 0; def->mode = comAdvanced; @@ -2190,7 +2040,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Top"); def->category = L("Layers and Perimeters"); def->tooltip = L("Number of solid layers to generate on top surfaces."); - def->cli = "top-solid-layers=i"; def->full_label = L("Top solid layers"); def->min = 0; def->default_value = new ConfigOptionInt(3); @@ -2199,7 +2048,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Travel"); def->tooltip = L("Speed for travel moves (jumps between distant extrusion points)."); def->sidetext = L("mm/s"); - def->cli = "travel-speed=f"; def->aliases = { "travel_feed_rate" }; def->min = 1; def->mode = comAdvanced; @@ -2209,7 +2057,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Use firmware retraction"); def->tooltip = L("This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin."); - def->cli = "use-firmware-retraction!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -2217,7 +2064,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Use relative E distances"); def->tooltip = L("If your firmware requires relative E values, check this, " "otherwise leave it unchecked. Most firmwares use absolute values."); - def->cli = "use-relative-e-distances!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -2229,7 +2075,6 @@ void PrintConfigDef::init_fff_params() "in your start G-code in order to turn volumetric mode on and use the filament " "diameter associated to the filament selected in Slic3r. This is only supported " "in recent Marlin."); - def->cli = "use-volumetric-e!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(false); @@ -2237,7 +2082,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Enable variable layer height feature"); def->tooltip = L("Some printers or printer setups may have difficulties printing " "with a variable layer height. Enabled by default."); - def->cli = "variable-layer-height!"; def->mode = comExpert; def->default_value = new ConfigOptionBool(true); @@ -2245,7 +2089,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Wipe while retracting"); def->tooltip = L("This flag will move the nozzle while retracting to minimize the possible blob " "on leaky extruders."); - def->cli = "wipe!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBools { false }; @@ -2253,7 +2096,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Enable"); def->tooltip = L("Multi material printers may need to prime or purge extruders on tool changes. " "Extrude the excess material into the wipe tower."); - def->cli = "wipe-tower!"; def->mode = comAdvanced; def->default_value = new ConfigOptionBool(false); @@ -2262,14 +2104,12 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. "); - def->cli = "wiping-volumes-extruders=f@"; def->default_value = new ConfigOptionFloats { 70.f, 70.f, 70.f, 70.f, 70.f, 70.f, 70.f, 70.f, 70.f, 70.f }; def = this->add("wiping_volumes_matrix", coFloats); def->label = L("Purging volumes - matrix"); def->tooltip = L("This matrix describes volumes (in cubic milimetres) required to purge the" " new filament on the wipe tower for any given pair of tools. "); - def->cli = "wiping-volumes-matrix=f@"; def->default_value = new ConfigOptionFloats { 0.f, 140.f, 140.f, 140.f, 140.f, 140.f, 0.f, 140.f, 140.f, 140.f, 140.f, 140.f, 0.f, 140.f, 140.f, @@ -2280,7 +2120,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Position X"); def->tooltip = L("X coordinate of the left front corner of a wipe tower"); def->sidetext = L("mm"); - def->cli = "wipe-tower-x=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(180.); @@ -2288,7 +2127,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Position Y"); def->tooltip = L("Y coordinate of the left front corner of a wipe tower"); def->sidetext = L("mm"); - def->cli = "wipe-tower-y=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(140.); @@ -2296,7 +2134,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Width"); def->tooltip = L("Width of a wipe tower"); def->sidetext = L("mm"); - def->cli = "wipe-tower-width=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(60.); @@ -2304,7 +2141,6 @@ void PrintConfigDef::init_fff_params() def->label = L("Wipe tower rotation angle"); def->tooltip = L("Wipe tower rotation angle with respect to x-axis "); def->sidetext = L("degrees"); - def->cli = "wipe-tower-rotation-angle=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0.); @@ -2314,7 +2150,6 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Purging after toolchange will done inside this object's infills. " "This lowers the amount of waste but may result in longer print time " " due to additional travel moves."); - def->cli = "wipe-into-infill!"; def->default_value = new ConfigOptionBool(false); def = this->add("wipe_into_objects", coBool); @@ -2323,14 +2158,12 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result."); - def->cli = "wipe-into-objects!"; def->default_value = new ConfigOptionBool(false); def = this->add("wipe_tower_bridging", coFloat); def->label = L("Maximal bridging distance"); def->tooltip = L("Maximal distance between supports on sparse infill sections. "); def->sidetext = L("mm"); - def->cli = "wipe-tower-bridging=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(10.); @@ -2341,7 +2174,6 @@ void PrintConfigDef::init_fff_params() "(negative = inwards, positive = outwards). This might be useful " "for fine-tuning hole sizes."); def->sidetext = L("mm"); - def->cli = "xy-size-compensation=f"; def->mode = comExpert; def->default_value = new ConfigOptionFloat(0); @@ -2352,56 +2184,8 @@ void PrintConfigDef::init_fff_params() "for example, if your endstop zero actually leaves the nozzle 0.3mm far " "from the print bed, set this to -0.3 (or fix your endstop)."); def->sidetext = L("mm"); - def->cli = "z-offset=f"; def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0); - - def = this->add("bed_size_x", coFloat); - def->label = L("Bed size X"); - def->category = L("Dwarf"); - def->sidetext = L("mm"); - def->cli = "bed-size-x=f"; - def->default_value = new ConfigOptionFloat(68.); - - def = this->add("bed_size_y", coFloat); - def->label = L("Bed size Y"); - def->category = L("Dwarf"); - def->sidetext = L("mm"); - def->cli = "bed-size-y=f"; - def->default_value = new ConfigOptionFloat(120.); - - def = this->add("pixel_width", coInt); - def->label = L("Picture resolution X"); - def->category = L("Dwarf"); - def->sidetext = L("px"); - def->cli = "pixel-width=i"; - def->min = 1; - def->mode = comExpert; - def->default_value = new ConfigOptionInt(1440); - - def = this->add("pixel_height", coInt); - def->label = L("Picture resolution Y"); - def->category = L("Dwarf"); - def->sidetext = L("px"); - def->cli = "pixel-height=i"; - def->min = 1; - def->default_value = new ConfigOptionInt(2560); - - def = this->add("exp_time", coFloat); - def->label = L("Exposure time"); - def->category = L("Dwarf"); - def->sidetext = L("s"); - def->cli = "exp-time=f"; - def->min = 1; - def->default_value = new ConfigOptionFloat(8.); - - def = this->add("exp_time_first", coFloat); - def->label = L("Exposure time first layers"); - def->category = L("Dwarf"); - def->sidetext = L("s"); - def->cli = "exp-time-first=f"; - def->min = 1; - def->default_value = new ConfigOptionFloat(35.); } void PrintConfigDef::init_sla_params() @@ -2410,17 +2194,16 @@ void PrintConfigDef::init_sla_params() ConfigOptionDef* def; // SLA Printer settings + def = this->add("display_width", coFloat); def->label = L("Display width"); def->tooltip = L("Width of the display"); - def->cli = "display-width=f"; def->min = 1; def->default_value = new ConfigOptionFloat(120.); def = this->add("display_height", coFloat); def->label = L("Display height"); def->tooltip = L("Height of the display"); - def->cli = "display-height=f"; def->min = 1; def->default_value = new ConfigOptionFloat(68.); @@ -2428,14 +2211,12 @@ void PrintConfigDef::init_sla_params() def->full_label = L("Number of pixels in"); def->label = ("X"); def->tooltip = L("Number of pixels in X"); - def->cli = "display-pixels-x=i"; def->min = 100; def->default_value = new ConfigOptionInt(2560); def = this->add("display_pixels_y", coInt); def->label = ("Y"); def->tooltip = L("Number of pixels in Y"); - def->cli = "display-pixels-y=i"; def->min = 100; def->default_value = new ConfigOptionInt(1440); @@ -2444,12 +2225,12 @@ void PrintConfigDef::init_sla_params() def->tooltip = L("Set the actual LCD display orientation inside the SLA printer." " Portrait mode will flip the meaning of display width and height parameters" " and the output images will be rotated by 90 degrees."); - def->cli = "display-orientation=s"; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("landscape"); def->enum_values.push_back("portrait"); def->enum_labels.push_back(L("Landscape")); def->enum_labels.push_back(L("Portrait")); + def->mode = comExpert; def->default_value = new ConfigOptionEnum(sladoPortrait); def = this->add("fast_tilt_time", coFloat); @@ -2489,7 +2270,6 @@ void PrintConfigDef::init_sla_params() def->label = L("Initial layer height"); def->tooltip = L("Initial layer height"); def->sidetext = L("mm"); - def->cli = "initial-layer-height=f"; def->min = 0; def->default_value = new ConfigOptionFloat(0.3); @@ -2505,7 +2285,6 @@ void PrintConfigDef::init_sla_params() def->label = L("Exposure time"); def->tooltip = L("Exposure time"); def->sidetext = L("s"); - def->cli = "exposure-time=f"; def->min = 0; def->default_value = new ConfigOptionFloat(10); @@ -2513,7 +2292,6 @@ void PrintConfigDef::init_sla_params() def->label = L("Initial exposure time"); def->tooltip = L("Initial exposure time"); def->sidetext = L("s"); - def->cli = "initial-exposure-time=f"; def->min = 0; def->default_value = new ConfigOptionFloat(15); @@ -2532,7 +2310,6 @@ void PrintConfigDef::init_sla_params() def = this->add("material_notes", coString); def->label = L("SLA print material notes"); def->tooltip = L("You can put your notes regarding the SLA print material here."); - def->cli = "material-notes=s"; def->multiline = true; def->full_width = true; def->height = 130; @@ -2544,25 +2321,28 @@ void PrintConfigDef::init_sla_params() def->tooltip = L("Default print profile associated with the current printer profile. " "On selection of the current printer profile, this print profile will be activated."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("sla_material_settings_id", coString); def->default_value = new ConfigOptionString(""); - + def->cli = ConfigOptionDef::nocli; def = this->add("default_sla_print_profile", coString); def->label = L("Default SLA material profile"); def->tooltip = L("Default print profile associated with the current printer profile. " "On selection of the current printer profile, this print profile will be activated."); def->default_value = new ConfigOptionString(); + def->cli = ConfigOptionDef::nocli; def = this->add("sla_print_settings_id", coString); def->default_value = new ConfigOptionString(""); + def->cli = ConfigOptionDef::nocli; def = this->add("supports_enable", coBool); def->label = L("Generate supports"); def->category = L("Supports"); def->tooltip = L("Generate supports for the models"); - def->cli = ""; + def->mode = comSimple; def->default_value = new ConfigOptionBool(true); def = this->add("support_head_front_diameter", coFloat); @@ -2570,8 +2350,8 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("Diameter of the pointing side of the head"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(0.4); def = this->add("support_head_penetration", coFloat); @@ -2579,7 +2359,7 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("How much the pinhead has to penetrate the model surface"); def->sidetext = L("mm"); - def->cli = ""; + def->mode = comAdvanced; def->min = 0; def->default_value = new ConfigOptionFloat(0.2); @@ -2588,8 +2368,9 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("Width from the back sphere center to the front sphere center"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 20; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(1.0); def = this->add("support_pillar_diameter", coFloat); @@ -2597,8 +2378,9 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("Diameter in mm of the support pillars"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 15; + def->mode = comSimple; def->default_value = new ConfigOptionFloat(1.0); def = this->add("support_pillar_connection_mode", coEnum); @@ -2607,7 +2389,6 @@ void PrintConfigDef::init_sla_params() " Can be zig-zag, cross (double zig-zag) or dynamic which" " will automatically switch between the first two depending" " on the distance of the two pillars."); - def->cli = ""; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("zigzag"); def->enum_values.push_back("cross"); @@ -2615,13 +2396,13 @@ void PrintConfigDef::init_sla_params() def->enum_labels.push_back(L("Zig-Zag")); def->enum_labels.push_back(L("Cross")); def->enum_labels.push_back(L("Dynamic")); + def->mode = comAdvanced; def->default_value = new ConfigOptionEnum(slapcmDynamic); def = this->add("support_buildplate_only", coBool); def->label = L("Support on build plate only"); def->category = L("Supports"); def->tooltip = L("Only create support if it lies on a build plate. Don't create support on a print."); - def->cli = "support-buildplate-only!"; def->mode = comSimple; def->default_value = new ConfigOptionBool(false); @@ -2631,9 +2412,9 @@ void PrintConfigDef::init_sla_params() def->tooltip = L("Merging bridges or pillars into another pillars can " "increase the radius. Zero means no increase, one means " "full increase."); - def->cli = ""; def->min = 0; def->max = 1; + def->mode = comExpert; def->default_value = new ConfigOptionFloat(0.0); def = this->add("support_base_diameter", coFloat); @@ -2641,8 +2422,9 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("Diameter in mm of the pillar base"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 30; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(4.0); def = this->add("support_base_height", coFloat); @@ -2650,8 +2432,8 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("The height of the pillar base cone"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(1.0); def = this->add("support_critical_angle", coFloat); @@ -2659,8 +2441,9 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("The default angle for connecting support sticks and junctions."); def->sidetext = L("°"); - def->cli = ""; def->min = 0; + def->max = 90; + def->mode = comExpert; def->default_value = new ConfigOptionFloat(45); def = this->add("support_max_bridge_length", coFloat); @@ -2668,17 +2451,28 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("The max length of a bridge"); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(15.0); + def = this->add("support_max_pillar_link_distance", coFloat); + def->label = L("Max pillar linking distance"); + def->category = L("Supports"); + def->tooltip = L("The max distance of two pillars to get linked with each other." + " A zero value will prohibit pillar cascading."); + def->sidetext = L("mm"); + def->min = 0; // 0 means no linking + def->mode = comAdvanced; + def->default_value = new ConfigOptionFloat(10.0); + def = this->add("support_object_elevation", coFloat); def->label = L("Object elevation"); def->category = L("Supports"); def->tooltip = L("How much the supports should lift up the supported object."); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 150; // This is the max height of print on SL1 + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(5.0); def = this->add("support_points_density_relative", coInt); @@ -2686,7 +2480,6 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("This is a relative measure of support points density."); def->sidetext = L("%"); - def->cli = ""; def->min = 0; def->default_value = new ConfigOptionInt(100); @@ -2695,7 +2488,6 @@ void PrintConfigDef::init_sla_params() def->category = L("Supports"); def->tooltip = L("No support points will be placed closer than this threshold."); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; def->default_value = new ConfigOptionFloat(0.f); @@ -2703,43 +2495,50 @@ void PrintConfigDef::init_sla_params() def->label = L("Use pad"); def->category = L("Pad"); def->tooltip = L("Add a pad underneath the supported model"); - def->cli = ""; + def->mode = comSimple; def->default_value = new ConfigOptionBool(true); def = this->add("pad_wall_thickness", coFloat); def->label = L("Pad wall thickness"); def->category = L("Pad"); -// def->tooltip = L(""); + def->tooltip = L("The thickness of the pad and its optional cavity walls."); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 30; + def->mode = comSimple; def->default_value = new ConfigOptionFloat(2.0); def = this->add("pad_wall_height", coFloat); def->label = L("Pad wall height"); + def->tooltip = L("Defines the cavity depth. Set to zero to disable the cavity."); def->category = L("Pad"); // def->tooltip = L(""); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->max = 30; + def->mode = comSimple; def->default_value = new ConfigOptionFloat(5.0); def = this->add("pad_max_merge_distance", coFloat); def->label = L("Max merge distance"); def->category = L("Pad"); -// def->tooltip = L(""); + def->tooltip = L("Some objects can get along with a few smaller pads " + "instead of a single big one. This parameter defines " + "how far the center of two smaller pads should be. If they" + "are closer, they will get merged into one pad."); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->mode = comExpert; def->default_value = new ConfigOptionFloat(50.0); + // This is disabled on the UI. I hope it will never be enabled. def = this->add("pad_edge_radius", coFloat); def->label = L("Pad edge radius"); def->category = L("Pad"); // def->tooltip = L(""); def->sidetext = L("mm"); - def->cli = ""; def->min = 0; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(1.0); def = this->add("pad_wall_slope", coFloat); @@ -2748,9 +2547,9 @@ void PrintConfigDef::init_sla_params() def->tooltip = L("The slope of the pad wall relative to the bed plane. " "90 degrees means straight walls."); def->sidetext = L("degrees"); - def->cli = ""; def->min = 45; def->max = 90; + def->mode = comAdvanced; def->default_value = new ConfigOptionFloat(45.0); } @@ -2955,7 +2754,7 @@ std::string FullPrintConfig::validate() return "--use-firmware-retraction is only supported by Marlin, Smoothie, Repetier and Machinekit firmware"; if (this->use_firmware_retraction.value) - for (bool wipe : this->wipe.values) + for (unsigned char wipe : this->wipe.values) if (wipe) return "--use-firmware-retraction is not compatible with --wipe"; @@ -2999,7 +2798,7 @@ std::string FullPrintConfig::validate() return "Invalid value for --extruder-clearance-height"; // --extrusion-multiplier - for (float em : this->extrusion_multiplier.values) + for (double em : this->extrusion_multiplier.values) if (em <= 0) return "Invalid value for --extrusion-multiplier"; @@ -3100,164 +2899,218 @@ StaticPrintConfig::StaticCache SLAPrintObje StaticPrintConfig::StaticCache SLAPrinterConfig::s_cache_SLAPrinterConfig; StaticPrintConfig::StaticCache SLAFullPrintConfig::s_cache_SLAFullPrintConfig; -CLIConfigDef::CLIConfigDef() +CLIActionsConfigDef::CLIActionsConfigDef() { - ConfigOptionDef *def; + ConfigOptionDef* def; - def = this->add("cut", coFloat); - def->label = L("Cut"); - def->tooltip = L("Cut model at the given Z."); - def->cli = "cut"; - def->default_value = new ConfigOptionFloat(0); - - def = this->add("dont_arrange", coBool); - def->label = L("Dont arrange"); - def->tooltip = L("Don't arrange the objects on the build plate. The model coordinates " - "define the absolute positions on the build plate. " - "The option --center will be ignored."); - def->cli = "dont-arrange"; + // Actions: + def = this->add("export_obj", coBool); + def->label = L("Export SVG"); + def->tooltip = L("Export the model(s) as OBJ."); + def->default_value = new ConfigOptionBool(false); + +/* + def = this->add("export_svg", coBool); + def->label = L("Export SVG"); + def->tooltip = L("Slice the model and export solid slices as SVG."); + def->default_value = new ConfigOptionBool(false); +*/ + + def = this->add("export_sla", coBool); + def->label = L("Export SLA"); + def->tooltip = L("Slice the model and export SLA printing layers as PNG."); + def->cli = "export-sla|sla"; def->default_value = new ConfigOptionBool(false); - - def = this->add("datadir", coString); - def->label = L("User data directory"); - def->tooltip = L("Load and store settings at the given directory. " - "This is useful for maintaining different profiles or including " - "configurations from a network storage."); - def->cli = "datadir"; - def->default_value = new ConfigOptionString(); def = this->add("export_3mf", coBool); def->label = L("Export 3MF"); - def->tooltip = L("Slice the model and export slices as 3MF."); - def->cli = "export-3mf"; + def->tooltip = L("Export the model(s) as 3MF."); + def->default_value = new ConfigOptionBool(false); + + def = this->add("export_amf", coBool); + def->label = L("Export AMF"); + def->tooltip = L("Export the model(s) as AMF."); + def->default_value = new ConfigOptionBool(false); + + def = this->add("export_stl", coBool); + def->label = L("Export STL"); + def->tooltip = L("Export the model(s) as STL."); + def->default_value = new ConfigOptionBool(false); + + def = this->add("export_gcode", coBool); + def->label = L("Export G-code"); + def->tooltip = L("Slice the model and export toolpaths as G-code."); + def->cli = "export-gcode|gcode|g"; def->default_value = new ConfigOptionBool(false); def = this->add("slice", coBool); def->label = L("Slice"); - def->tooltip = L("Slice the model and export gcode."); - def->cli = "slice"; + def->tooltip = L("Slice the model as FFF or SLA based on the printer_technology configuration value."); + def->cli = "slice|s"; def->default_value = new ConfigOptionBool(false); def = this->add("help", coBool); def->label = L("Help"); def->tooltip = L("Show this help."); - def->cli = "help"; + def->cli = "help|h"; def->default_value = new ConfigOptionBool(false); - def = this->add("gui", coBool); - def->label = L("Use GUI"); - def->tooltip = L("Forces the GUI launch instead of command line slicing " - "(if you supply a model file, it will be loaded into the plater)"); - def->cli = "gui"; + def = this->add("help_fff", coBool); + def->label = L("Help (FFF options)"); + def->tooltip = L("Show the full list of print/G-code configuration options."); + def->default_value = new ConfigOptionBool(false); + + def = this->add("help_sla", coBool); + def->label = L("Help (SLA options)"); + def->tooltip = L("Show the full list of SLA print configuration options."); def->default_value = new ConfigOptionBool(false); def = this->add("info", coBool); def->label = L("Output Model Info"); def->tooltip = L("Write information about the model to the console."); - def->cli = "info"; def->default_value = new ConfigOptionBool(false); - def = this->add("load", coStrings); - def->label = L("Load config file"); - def->tooltip = L("Load configuration from the specified file. It can be used more than once to load options from multiple files."); - def->cli = "load"; - def->default_value = new ConfigOptionStrings(); - - def = this->add("no_gui", coBool); - def->label = L("Do not use GUI"); - def->tooltip = L("Forces the command line slicing instead of gui. This takes precedence over --gui if both are present."); - def->cli = "no-gui"; - def->default_value = new ConfigOptionBool(false); - - def = this->add("output", coString); - def->label = L("Output File"); - def->tooltip = L("The file where the output will be written (if not specified, it will be based on the input file)."); - def->cli = "output"; - def->default_value = new ConfigOptionString(""); - - def = this->add("rotate", coFloat); - def->label = L("Rotate"); - def->tooltip = L("Rotation angle around the Z axis in degrees (0-360, default: 0)."); - def->cli = "rotate"; - def->default_value = new ConfigOptionFloat(0); - - def = this->add("rotate_x", coFloat); - def->label = L("Rotate around X"); - def->tooltip = L("Rotation angle around the X axis in degrees (0-360, default: 0)."); - def->cli = "rotate-x"; - def->default_value = new ConfigOptionFloat(0); - - def = this->add("rotate_y", coFloat); - def->label = L("Rotate around Y"); - def->tooltip = L("Rotation angle around the Y axis in degrees (0-360, default: 0)."); - def->cli = "rotate-y"; - def->default_value = new ConfigOptionFloat(0); - def = this->add("save", coString); def->label = L("Save config file"); def->tooltip = L("Save configuration to the specified file."); - def->cli = "save"; def->default_value = new ConfigOptionString(); - - def = this->add("scale", coFloat); - def->label = L("Scale"); - def->tooltip = L("Scaling factor (default: 1)."); - def->cli = "scale"; - def->default_value = new ConfigOptionFloat(1); +} -/* +CLITransformConfigDef::CLITransformConfigDef() +{ + ConfigOptionDef* def; + + // Transform options: + def = this->add("align_xy", coPoint); + def->label = L("Align XY"); + def->tooltip = L("Align the model to the given point."); + def->default_value = new ConfigOptionPoint(Vec2d(100,100)); + + def = this->add("cut", coFloat); + def->label = L("Cut"); + def->tooltip = L("Cut model at the given Z."); + def->default_value = new ConfigOptionFloat(0); + +/* + def = this->add("cut_grid", coFloat); + def->label = L("Cut"); + def->tooltip = L("Cut model in the XY plane into tiles of the specified max size."); + def->default_value = new ConfigOptionPoint(); + + def = this->add("cut_x", coFloat); + def->label = L("Cut"); + def->tooltip = L("Cut model at the given X."); + def->default_value = new ConfigOptionFloat(0); + + def = this->add("cut_y", coFloat); + def->label = L("Cut"); + def->tooltip = L("Cut model at the given Y."); + def->default_value = new ConfigOptionFloat(0); +*/ + + def = this->add("center", coPoint); + def->label = L("Center"); + def->tooltip = L("Center the print around the given center."); + def->default_value = new ConfigOptionPoint(Vec2d(100,100)); + + def = this->add("dont_arrange", coBool); + def->label = L("Don't arrange"); + def->tooltip = L("Do not rearrange the given models before merging and keep their original XY coordinates."); + + def = this->add("duplicate", coInt); + def->label = L("Duplicate"); + def->tooltip =L("Multiply copies by this factor."); + def->min = 1; + + def = this->add("duplicate_grid", coPoint); + def->label = L("Duplicate by grid"); + def->tooltip = L("Multiply copies by creating a grid."); + + def = this->add("merge", coBool); + def->label = L("Merge"); + def->tooltip = L("Arrange the supplied models in a plate and merge them in a single model in order to perform actions once."); + def->cli = "merge|m"; + + def = this->add("repair", coBool); + def->label = L("Repair"); + def->tooltip = L("Try to repair any non-manifold meshes (this option is implicitly added whenever we need to slice the model to perform the requested action)."); + + def = this->add("rotate", coFloat); + def->label = L("Rotate"); + def->tooltip = L("Rotation angle around the Z axis in degrees."); + def->default_value = new ConfigOptionFloat(0); + + def = this->add("rotate_x", coFloat); + def->label = L("Rotate around X"); + def->tooltip = L("Rotation angle around the X axis in degrees."); + def->default_value = new ConfigOptionFloat(0); + + def = this->add("rotate_y", coFloat); + def->label = L("Rotate around Y"); + def->tooltip = L("Rotation angle around the Y axis in degrees."); + def->default_value = new ConfigOptionFloat(0); + + def = this->add("scale", coFloatOrPercent); + def->label = L("Scale"); + def->tooltip = L("Scaling factor or percentage."); + def->default_value = new ConfigOptionFloatOrPercent(1, false); + + def = this->add("split", coBool); + def->label = L("Split"); + def->tooltip = L("Detect unconnected parts in the given model(s) and split them into separate objects."); + def = this->add("scale_to_fit", coPoint3); def->label = L("Scale to Fit"); def->tooltip = L("Scale to fit the given volume."); - def->cli = "scale-to-fit"; - def->default_value = new ConfigOptionPoint3(Pointf3(0,0,0)); -*/ - - def = this->add("print_center", coPoint); - def->label = L("Print center"); - def->tooltip = L("Center the print around the given center (default: 100, 100)."); - def->cli = "print-center"; - def->default_value = new ConfigOptionPoint(Vec2d(100,100)); + def->default_value = new ConfigOptionPoint3(Vec3d(0,0,0)); } -const CLIConfigDef cli_config_def; +CLIMiscConfigDef::CLIMiscConfigDef() +{ + ConfigOptionDef* def; + + def = this->add("ignore_nonexistent_config", coBool); + def->label = L("Ignore non-existent config files"); + def->tooltip = L("Do not fail if a file supplied to --load does not exist."); + + def = this->add("load", coStrings); + def->label = L("Load config file"); + def->tooltip = L("Load configuration from the specified file. It can be used more than once to load options from multiple files."); + + def = this->add("output", coString); + def->label = L("Output File"); + def->tooltip = L("The file where the output will be written (if not specified, it will be based on the input file)."); + def->cli = "output|o"; + +/* + def = this->add("autosave", coString); + def->label = L("Autosave"); + def->tooltip = L("Automatically export current configuration to the specified file."); +*/ + + def = this->add("datadir", coString); + def->label = L("Data directory"); + def->tooltip = L("Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage."); + + def = this->add("loglevel", coInt); + def->label = L("Logging level"); + def->tooltip = L("Messages with severity lower or eqal to the loglevel will be printed out. 0:trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"); + def->min = 0; +} + +const CLIActionsConfigDef cli_actions_config_def; +const CLITransformConfigDef cli_transform_config_def; +const CLIMiscConfigDef cli_misc_config_def; + DynamicPrintAndCLIConfig::PrintAndCLIConfigDef DynamicPrintAndCLIConfig::s_def; void DynamicPrintAndCLIConfig::handle_legacy(t_config_option_key &opt_key, std::string &value) const { - if (cli_config_def.options.find(opt_key) == cli_config_def.options.end()) { - PrintConfigDef::handle_legacy(opt_key, value); - } -} - -std::ostream& print_cli_options(std::ostream& out) -{ - for (const auto& opt : cli_config_def.options) { - if (opt.second.cli.size() != 0) { - out << "\t" << std::left << std::setw(40) << std::string("--") + opt.second.cli; - out << "\t" << opt.second.tooltip << "\n"; - if (opt.second.default_value != nullptr) - out << "\t" << std::setw(40) << " " << "\t" << " (default: " << opt.second.default_value->serialize() << ")"; - out << "\n"; - } - } - std::cerr << std::endl; - return out; -} - -std::ostream& print_print_options(std::ostream& out) -{ - for (const auto& opt : print_config_def.options) { - if (opt.second.cli.size() != 0) { - out << "\t" << std::left << std::setw(40) << std::string("--") + opt.second.cli; - out << "\t" << opt.second.tooltip << "\n"; - if (opt.second.default_value != nullptr) - out << "\t" << std::setw(40) << " " << "\t" << " (default: " << opt.second.default_value->serialize() << ")"; - out << "\n"; - } - } - std::cerr << std::endl; - return out; + if (cli_actions_config_def .options.find(opt_key) == cli_actions_config_def .options.end() && + cli_transform_config_def.options.find(opt_key) == cli_transform_config_def.options.end() && + cli_misc_config_def .options.find(opt_key) == cli_misc_config_def .options.end()) { + PrintConfigDef::handle_legacy(opt_key, value); + } } } diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index f4d9053a6..c5585326b 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -24,14 +24,6 @@ namespace Slic3r { -enum PrinterTechnology -{ - // Fused Filament Fabrication - ptFFF, - // Stereolitography - ptSLA, -}; - enum GCodeFlavor { gcfRepRap, gcfRepetier, gcfTeacup, gcfMakerWare, gcfMarlin, gcfSailfish, gcfMach3, gcfMachinekit, gcfSmoothie, gcfNoExtrusion, @@ -806,12 +798,6 @@ public: ConfigOptionFloats wiping_volumes_matrix; ConfigOptionFloats wiping_volumes_extruders; ConfigOptionFloat z_offset; - ConfigOptionFloat bed_size_x; - ConfigOptionFloat bed_size_y; - ConfigOptionInt pixel_width; - ConfigOptionInt pixel_height; - ConfigOptionFloat exp_time; - ConfigOptionFloat exp_time_first; protected: PrintConfig(int) : MachineEnvelopeConfig(1), GCodeConfig(1) {} @@ -884,12 +870,6 @@ protected: OPT_PTR(wiping_volumes_matrix); OPT_PTR(wiping_volumes_extruders); OPT_PTR(z_offset); - OPT_PTR(bed_size_x); - OPT_PTR(bed_size_y); - OPT_PTR(pixel_width); - OPT_PTR(pixel_height); - OPT_PTR(exp_time); - OPT_PTR(exp_time_first); } }; @@ -1006,6 +986,9 @@ public: // The max length of a bridge in mm ConfigOptionFloat support_max_bridge_length /*= 15.0*/; + // The max distance of two pillars to get cross linked. + ConfigOptionFloat support_max_pillar_link_distance; + // The elevation in Z direction upwards. This is the space between the pad // and the model object's bounding box bottom. Units in mm. ConfigOptionFloat support_object_elevation /*= 5.0*/; @@ -1053,6 +1036,7 @@ protected: OPT_PTR(support_base_height); OPT_PTR(support_critical_angle); OPT_PTR(support_max_bridge_length); + OPT_PTR(support_max_pillar_link_distance); OPT_PTR(support_points_density_relative); OPT_PTR(support_points_minimal_distance); OPT_PTR(support_object_elevation); @@ -1145,72 +1129,32 @@ protected: #undef STATIC_PRINT_CONFIG_CACHE_DERIVED #undef OPT_PTR -class CLIConfigDef : public ConfigDef +class CLIActionsConfigDef : public ConfigDef { public: - CLIConfigDef(); + CLIActionsConfigDef(); }; -extern const CLIConfigDef cli_config_def; - -#define OPT_PTR(KEY) if (opt_key == #KEY) return &this->KEY - -class CLIConfig : public virtual ConfigBase, public StaticConfig +class CLITransformConfigDef : public ConfigDef { public: - ConfigOptionFloat cut; - ConfigOptionString datadir; - ConfigOptionBool dont_arrange; - ConfigOptionBool export_3mf; - ConfigOptionBool gui; - ConfigOptionBool info; - ConfigOptionBool help; - ConfigOptionStrings load; - ConfigOptionBool no_gui; - ConfigOptionString output; - ConfigOptionPoint print_center; - ConfigOptionFloat rotate; - ConfigOptionFloat rotate_x; - ConfigOptionFloat rotate_y; - ConfigOptionString save; - ConfigOptionFloat scale; -// ConfigOptionPoint3 scale_to_fit; - ConfigOptionBool slice; - - CLIConfig() : ConfigBase(), StaticConfig() - { - this->set_defaults(); - }; - - // Overrides ConfigBase::def(). Static configuration definition. Any value stored into this ConfigBase shall have its definition here. - const ConfigDef* def() const override { return &cli_config_def; } - t_config_option_keys keys() const override { return cli_config_def.keys(); } - - ConfigOption* optptr(const t_config_option_key &opt_key, bool create = false) override - { - OPT_PTR(cut); - OPT_PTR(datadir); - OPT_PTR(dont_arrange); - OPT_PTR(export_3mf); - OPT_PTR(gui); - OPT_PTR(help); - OPT_PTR(info); - OPT_PTR(load); - OPT_PTR(no_gui); - OPT_PTR(output); - OPT_PTR(print_center); - OPT_PTR(rotate); - OPT_PTR(rotate_x); - OPT_PTR(rotate_y); - OPT_PTR(save); - OPT_PTR(scale); -// OPT_PTR(scale_to_fit); - OPT_PTR(slice); - return NULL; - } + CLITransformConfigDef(); }; -#undef OPT_PTR +class CLIMiscConfigDef : public ConfigDef +{ +public: + CLIMiscConfigDef(); +}; + +// This class defines the command line options representing actions. +extern const CLIActionsConfigDef cli_actions_config_def; + +// This class defines the command line options representing transforms. +extern const CLITransformConfigDef cli_transform_config_def; + +// This class defines all command line options that are not actions or transforms. +extern const CLIMiscConfigDef cli_misc_config_def; class DynamicPrintAndCLIConfig : public DynamicPrintConfig { @@ -1233,19 +1177,16 @@ private: public: PrintAndCLIConfigDef() { this->options.insert(print_config_def.options.begin(), print_config_def.options.end()); - this->options.insert(cli_config_def.options.begin(), cli_config_def.options.end()); + this->options.insert(cli_actions_config_def.options.begin(), cli_actions_config_def.options.end()); + this->options.insert(cli_transform_config_def.options.begin(), cli_transform_config_def.options.end()); + this->options.insert(cli_misc_config_def.options.begin(), cli_misc_config_def.options.end()); } - // Do not release the default values, they are handled by print_config_def & cli_config_def. + // Do not release the default values, they are handled by print_config_def & cli_actions_config_def / cli_transform_config_def / cli_misc_config_def. ~PrintAndCLIConfigDef() { this->options.clear(); } }; static PrintAndCLIConfigDef s_def; }; -/// Iterate through all of the print options and write them to a stream. -std::ostream& print_print_options(std::ostream& out); -/// Iterate through all of the CLI options and write them to a stream. -std::ostream& print_cli_options(std::ostream& out); - } // namespace Slic3r #endif diff --git a/src/libslic3r/SLA/SLAAutoSupports.cpp b/src/libslic3r/SLA/SLAAutoSupports.cpp index e99ed111e..9e9f07b6c 100644 --- a/src/libslic3r/SLA/SLAAutoSupports.cpp +++ b/src/libslic3r/SLA/SLAAutoSupports.cpp @@ -496,7 +496,7 @@ void SLAAutoSupports::uniformly_cover(const ExPolygons& islands, Structure& stru poisson_samples.erase(poisson_samples.begin() + poisson_samples_target, poisson_samples.end()); } for (const Vec2f &pt : poisson_samples) { - m_output.emplace_back(float(pt(0)), float(pt(1)), structure.height, 0.2f, is_new_island); + m_output.emplace_back(float(pt(0)), float(pt(1)), structure.height, m_config.head_diameter/2.f, is_new_island); structure.supports_force_this_layer += m_config.support_force(); grid3d.insert(pt, &structure); } diff --git a/src/libslic3r/SLA/SLAAutoSupports.hpp b/src/libslic3r/SLA/SLAAutoSupports.hpp index 5a758c2a6..038b505da 100644 --- a/src/libslic3r/SLA/SLAAutoSupports.hpp +++ b/src/libslic3r/SLA/SLAAutoSupports.hpp @@ -17,6 +17,7 @@ public: struct Config { float density_relative; float minimal_distance; + float head_diameter; /////////////// inline float support_force() const { return 10.f / density_relative; } // a force one point can support (arbitrary force unit) inline float tear_pressure() const { return 1.f; } // pressure that the display exerts (the force unit per mm2) diff --git a/src/libslic3r/SLA/SLABasePool.cpp b/src/libslic3r/SLA/SLABasePool.cpp index 6fd218402..2aabaa590 100644 --- a/src/libslic3r/SLA/SLABasePool.cpp +++ b/src/libslic3r/SLA/SLABasePool.cpp @@ -601,14 +601,16 @@ void create_base_pool(const ExPolygons &ground_layer, TriangleMesh& out, const double thickness = cfg.min_wall_thickness_mm; const double wingheight = cfg.min_wall_height_mm; const double fullheight = wingheight + thickness; - const double slope = cfg.wall_slope; + const double slope = cfg.wall_slope; const double wingdist = wingheight / std::tan(slope); + const double bottom_offs = (thickness + wingheight) / std::tan(slope); // scaled values const coord_t s_thickness = mm(thickness); const coord_t s_eradius = mm(cfg.edge_radius_mm); const coord_t s_safety_dist = 2*s_eradius + coord_t(0.8*s_thickness); const coord_t s_wingdist = mm(wingdist); + const coord_t s_bottom_offs = mm(bottom_offs); auto& thrcl = cfg.throw_on_cancel; @@ -620,7 +622,7 @@ void create_base_pool(const ExPolygons &ground_layer, TriangleMesh& out, // Get rid of any holes in the concave hull output. concaveh.holes.clear(); - // Here lies the trick that does the smooting only with clipper offset + // Here lies the trick that does the smoothing only with clipper offset // calls. The offset is configured to round edges. Inner edges will // be rounded because we offset twice: ones to get the outer (top) plate // and again to get the inner (bottom) plate @@ -628,10 +630,9 @@ void create_base_pool(const ExPolygons &ground_layer, TriangleMesh& out, outer_base.holes.clear(); offset(outer_base, s_safety_dist + s_wingdist + s_thickness); - ExPolygon bottom_poly = outer_base; bottom_poly.holes.clear(); - if(s_wingdist > 0) offset(bottom_poly, -s_wingdist); + offset(bottom_poly, -s_bottom_offs); // Punching a hole in the top plate for the cavity ExPolygon top_poly; @@ -692,7 +693,7 @@ void create_base_pool(const ExPolygons &ground_layer, TriangleMesh& out, // Now that we have the rounded edge connecting the top plate with // the outer side walls, we can generate and merge the sidewall geometry pool.merge(walls(ob.contour, bottom_poly.contour, wh, -fullheight, - wingdist, thrcl)); + bottom_offs, thrcl)); if(wingheight > 0) { // Generate the smoothed edge geometry diff --git a/src/libslic3r/SLA/SLACommon.hpp b/src/libslic3r/SLA/SLACommon.hpp index bdeead9ca..855802759 100644 --- a/src/libslic3r/SLA/SLACommon.hpp +++ b/src/libslic3r/SLA/SLACommon.hpp @@ -2,6 +2,7 @@ #define SLACOMMON_HPP #include +#include // #define SLIC3R_SLA_NEEDS_WINDTREE @@ -44,7 +45,6 @@ struct SupportPoint { bool operator!=(const SupportPoint& sp) const { return !(sp == (*this)); } }; - /// An index-triangle structure for libIGL functions. Also serves as an /// alternative (raw) input format for the SLASupportTree /*struct EigenMesh3D { @@ -78,24 +78,38 @@ public: // Result of a raycast class hit_result { - double m_t = std::numeric_limits::infinity(); + double m_t = std::nan(""); int m_face_id = -1; - const EigenMesh3D& m_mesh; + const EigenMesh3D *m_mesh = nullptr; Vec3d m_dir; - inline hit_result(const EigenMesh3D& em): m_mesh(em) {} + Vec3d m_source; friend class EigenMesh3D; + + // A valid object of this class can only be obtained from + // EigenMesh3D::query_ray_hit method. + explicit inline hit_result(const EigenMesh3D& em): m_mesh(&em) {} public: + // This can create a placeholder object which is invalid (not created + // by a query_ray_hit call) but the distance can be preset to + // a specific value for distinguishing the placeholder. + inline hit_result(double val = std::nan("")): m_t(val) {} + inline double distance() const { return m_t; } inline const Vec3d& direction() const { return m_dir; } + inline Vec3d position() const { return m_source + m_dir * m_t; } inline int face() const { return m_face_id; } + inline bool is_valid() const { return m_mesh != nullptr; } + + // Hit_result can decay into a double as the hit distance. + inline operator double() const { return distance(); } inline Vec3d normal() const { - if(m_face_id < 0) return {}; - auto trindex = m_mesh.m_F.row(m_face_id); - const Vec3d& p1 = m_mesh.V().row(trindex(0)); - const Vec3d& p2 = m_mesh.V().row(trindex(1)); - const Vec3d& p3 = m_mesh.V().row(trindex(2)); + if(m_face_id < 0 || !is_valid()) return {}; + auto trindex = m_mesh->m_F.row(m_face_id); + const Vec3d& p1 = m_mesh->V().row(trindex(0)); + const Vec3d& p2 = m_mesh->V().row(trindex(1)); + const Vec3d& p3 = m_mesh->V().row(trindex(2)); Eigen::Vector3d U = p2 - p1; Eigen::Vector3d V = p3 - p1; return U.cross(V).normalized(); @@ -133,6 +147,8 @@ public: bool inside(const Vec3d& p) const; #endif /* SLIC3R_SLA_NEEDS_WINDTREE */ + + double squared_distance(const Vec3d& p, int& i, Vec3d& c) const; }; @@ -142,4 +158,4 @@ public: } // namespace Slic3r -#endif // SLASUPPORTTREE_HPP \ No newline at end of file +#endif // SLASUPPORTTREE_HPP diff --git a/src/libslic3r/SLA/SLASpatIndex.hpp b/src/libslic3r/SLA/SLASpatIndex.hpp index 792e86c85..e5fbfa7d4 100644 --- a/src/libslic3r/SLA/SLASpatIndex.hpp +++ b/src/libslic3r/SLA/SLASpatIndex.hpp @@ -43,6 +43,8 @@ public: // For testing size_t size() const; bool empty() const { return size() == 0; } + + void foreach(std::function fn); }; } diff --git a/src/libslic3r/SLA/SLASupportTree.cpp b/src/libslic3r/SLA/SLASupportTree.cpp index 0ba09ead8..df9990822 100644 --- a/src/libslic3r/SLA/SLASupportTree.cpp +++ b/src/libslic3r/SLA/SLASupportTree.cpp @@ -12,9 +12,14 @@ #include #include -#include +#include #include #include +#include + +//! macro used to mark string used at localization, +//! return same string +#define L(s) Slic3r::I18N::translate(s) /** * Terminology: @@ -58,6 +63,21 @@ namespace Slic3r { namespace sla { +// Compile time configuration value definitions: + +// The max Z angle for a normal at which it will get completely ignored. +const double SupportConfig::normal_cutoff_angle = 150.0 * M_PI / 180.0; + +// The shortest distance of any support structure from the model surface +const double SupportConfig::safety_distance_mm = 0.5; + +const double SupportConfig::max_solo_pillar_height_mm = 15.0; +const double SupportConfig::max_dual_pillar_height_mm = 35.0; +const double SupportConfig::optimizer_rel_score_diff = 1e-6; +const unsigned SupportConfig::optimizer_max_iterations = 1000; +const unsigned SupportConfig::pillar_cascade_neighbors = 3; +const unsigned SupportConfig::max_bridges_on_pillar = 3; + using Coordf = double; using Portion = std::tuple; @@ -335,6 +355,11 @@ struct Head { return 2 * r_pin_mm + width_mm + 2*r_back_mm - penetration_mm; } + static double fullwidth(const SupportConfig& cfg) { + return 2 * cfg.head_front_radius_mm + cfg.head_width_mm + + 2 * cfg.head_back_radius_mm - cfg.head_penetration_mm; + } + Vec3d junction_point() const { return tr + ( 2 * r_pin_mm + width_mm + r_back_mm - penetration_mm)*dir; } @@ -366,7 +391,8 @@ struct Pillar { Contour3D base; double r = 1; size_t steps = 0; - Vec3d endpoint; + Vec3d endpt; + double height = 0; long id = -1; @@ -374,20 +400,27 @@ struct Pillar { bool starts_from_head = true; // Could start from a junction as well long start_junction_id = -1; + // How many bridges are connected to this pillar + unsigned bridges = 0; + + // How many pillars are cascaded with this one + unsigned links = 0; + Pillar(const Vec3d& jp, const Vec3d& endp, double radius = 1, size_t st = 45): - r(radius), steps(st), endpoint(endp), starts_from_head(false) + r(radius), steps(st), endpt(endp), starts_from_head(false) { assert(steps > 0); - double h = jp(Z) - endp(Z); - assert(h > 0); // Endpoint is below the starting point + height = jp(Z) - endp(Z); + if(height > 0) { // Endpoint is below the starting point - // We just create a bridge geometry with the pillar parameters and - // move the data. - Contour3D body = cylinder(radius, h, st, endp); - mesh.points.swap(body.points); - mesh.indices.swap(body.indices); + // We just create a bridge geometry with the pillar parameters and + // move the data. + Contour3D body = cylinder(radius, height, st, endp); + mesh.points.swap(body.points); + mesh.indices.swap(body.indices); + } } Pillar(const Junction& junc, const Vec3d& endp): @@ -399,8 +432,15 @@ struct Pillar { { } - void add_base(double height = 3, double radius = 2) { - if(height <= 0) return; + inline Vec3d startpoint() const { + return {endpt(X), endpt(Y), endpt(Z) + height}; + } + + inline const Vec3d& endpoint() const { return endpt; } + + Pillar& add_base(double baseheight = 3, double radius = 2) { + if(baseheight <= 0) return *this; + if(baseheight > height) baseheight = height; assert(steps >= 0); auto last = int(steps - 1); @@ -408,24 +448,24 @@ struct Pillar { if(radius < r ) radius = r; double a = 2*PI/steps; - double z = endpoint(2) + height; + double z = endpt(Z) + baseheight; for(size_t i = 0; i < steps; ++i) { double phi = i*a; - double x = endpoint(0) + r*std::cos(phi); - double y = endpoint(1) + r*std::sin(phi); + double x = endpt(X) + r*std::cos(phi); + double y = endpt(Y) + r*std::sin(phi); base.points.emplace_back(x, y, z); } for(size_t i = 0; i < steps; ++i) { double phi = i*a; - double x = endpoint(0) + radius*std::cos(phi); - double y = endpoint(1) + radius*std::sin(phi); - base.points.emplace_back(x, y, z - height); + double x = endpt(X) + radius*std::cos(phi); + double y = endpt(Y) + radius*std::sin(phi); + base.points.emplace_back(x, y, z - baseheight); } - auto ep = endpoint; ep(2) += height; - base.points.emplace_back(endpoint); + auto ep = endpt; ep(Z) += baseheight; + base.points.emplace_back(endpt); base.points.emplace_back(ep); auto& indices = base.indices; @@ -443,7 +483,7 @@ struct Pillar { indices.emplace_back(last, offs + last, offs); indices.emplace_back(hcenter, last, 0); indices.emplace_back(offs, offs + last, lcenter); - + return *this; } bool has_base() const { return !base.points.empty(); } @@ -551,209 +591,13 @@ enum { // For indexing Eigen vectors as v(X), v(Y), v(Z) instead of numbers X, Y, Z }; -PointSet to_point_set(const std::vector &v) -{ - PointSet ret(v.size(), 3); - long i = 0; - for(const SupportPoint& support_point : v) { - ret.row(i)(0) = support_point.pos(0); - ret.row(i)(1) = support_point.pos(1); - ret.row(i)(2) = support_point.pos(2); - ++i; - } - return ret; -} - -Vec3d model_coord(const ModelInstance& object, const Vec3f& mesh_coord) { - return object.transform_vector(mesh_coord.cast()); -} - -inline double ray_mesh_intersect(const Vec3d& s, - const Vec3d& dir, - const EigenMesh3D& m) -{ - return m.query_ray_hit(s, dir).distance(); -} - -// This function will test if a future pinhead would not collide with the model -// geometry. It does not take a 'Head' object because those are created after -// this test. -// Parameters: -// s: The touching point on the model surface. -// dir: This is the direction of the head from the pin to the back -// r_pin, r_back: the radiuses of the pin and the back sphere -// width: This is the full width from the pin center to the back center -// m: The object mesh -// -// Optional: -// samples: how many rays will be shot -// safety distance: This will be added to the radiuses to have a safety distance -// from the mesh. -double pinhead_mesh_intersect(const Vec3d& s, - const Vec3d& dir, - double r_pin, - double r_back, - double width, - const EigenMesh3D& m, - unsigned samples = 16, - double safety_distance = 0.001) -{ - // method based on: - // https://math.stackexchange.com/questions/73237/parametric-equation-of-a-circle-in-3d-space - - - // We will shoot multiple rays from the head pinpoint in the direction of - // the pinhead robe (side) surface. The result will be the smallest hit - // distance. - - // Move away slightly from the touching point to avoid raycasting on the - // inner surface of the mesh. - Vec3d v = dir; // Our direction (axis) - Vec3d c = s + width * dir; - const double& sd = safety_distance; - - // Two vectors that will be perpendicular to each other and to the axis. - // Values for a(X) and a(Y) are now arbitrary, a(Z) is just a placeholder. - Vec3d a(0, 1, 0), b; - - // The portions of the circle (the head-back circle) for which we will shoot - // rays. - std::vector phis(samples); - for(size_t i = 0; i < phis.size(); ++i) phis[i] = i*2*PI/phis.size(); - - // We have to address the case when the direction vector v (same as dir) - // is coincident with one of the world axes. In this case two of its - // components will be completely zero and one is 1.0. Our method becomes - // dangerous here due to division with zero. Instead, vector 'a' can be an - // element-wise rotated version of 'v' - auto chk1 = [] (double val) { return std::abs(std::abs(val) - 1) < 1e-20; }; - if(chk1(v(X)) || chk1(v(Y)) || chk1(v(Z))) { - a = {v(Z), v(X), v(Y)}; - b = {v(Y), v(Z), v(X)}; - } - else { - a(Z) = -(v(Y)*a(Y)) / v(Z); a.normalize(); - b = a.cross(v); - } - - // Now a and b vectors are perpendicular to v and to each other. Together - // they define the plane where we have to iterate with the given angles - // in the 'phis' vector - - tbb::parallel_for(size_t(0), phis.size(), - [&phis, &m, sd, r_pin, r_back, s, a, b, c](size_t i) - { - double& phi = phis[i]; - double sinphi = std::sin(phi); - double cosphi = std::cos(phi); - - // Let's have a safety coefficient for the radiuses. - double rpscos = (sd + r_pin) * cosphi; - double rpssin = (sd + r_pin) * sinphi; - double rpbcos = (sd + r_back) * cosphi; - double rpbsin = (sd + r_back) * sinphi; - - // Point on the circle on the pin sphere - Vec3d ps(s(X) + rpscos * a(X) + rpssin * b(X), - s(Y) + rpscos * a(Y) + rpssin * b(Y), - s(Z) + rpscos * a(Z) + rpssin * b(Z)); - - // Point ps is not on mesh but can be inside or outside as well. This - // would cause many problems with ray-casting. To detect the position we - // will use the ray-casting result (which has an is_inside predicate). - - // This is the point on the circle on the back sphere - Vec3d p(c(X) + rpbcos * a(X) + rpbsin * b(X), - c(Y) + rpbcos * a(Y) + rpbsin * b(Y), - c(Z) + rpbcos * a(Z) + rpbsin * b(Z)); - - Vec3d n = (p - ps).normalized(); - auto hr = m.query_ray_hit(ps + sd*n, n); - - if(hr.is_inside()) { // the hit is inside the model - if(hr.distance() > 2*r_pin) phi = 0; - else { - // re-cast the ray from the outside of the object - auto hr2 = m.query_ray_hit(ps + (hr.distance() + 2*sd)*n, n); - phi = hr2.distance(); - } - } else phi = hr.distance(); - }); - - auto mit = std::min_element(phis.begin(), phis.end()); - - return *mit; -} - - -// Checking bridge (pillar and stick as well) intersection with the model. If -// the function is used for headless sticks, the ins_check parameter have to be -// true as the beginning of the stick might be inside the model geometry. -double bridge_mesh_intersect(const Vec3d& s, - const Vec3d& dir, - double r, - const EigenMesh3D& m, - bool ins_check = false, - unsigned samples = 4, - double safety_distance = 0.001) -{ - // helper vector calculations - Vec3d a(0, 1, 0), b; - const double& sd = safety_distance; - - // INFO: for explanation of the method used here, see the previous method's - // comments. - - auto chk1 = [] (double val) { return std::abs(std::abs(val) - 1) < 1e-20; }; - if(chk1(dir(X)) || chk1(dir(Y)) || chk1(dir(Z))) { - a = {dir(Z), dir(X), dir(Y)}; - b = {dir(Y), dir(Z), dir(X)}; - } - else { - a(Z) = -(dir(Y)*a(Y)) / dir(Z); a.normalize(); - b = a.cross(dir); - } - - // circle portions - std::vector phis(samples); - for(size_t i = 0; i < phis.size(); ++i) phis[i] = i*2*PI/phis.size(); - - tbb::parallel_for(size_t(0), phis.size(), - [&phis, &m, a, b, sd, dir, r, s, ins_check](size_t i) - { - double& phi = phis[i]; - double sinphi = std::sin(phi); - double cosphi = std::cos(phi); - - // Let's have a safety coefficient for the radiuses. - double rcos = (sd + r) * cosphi; - double rsin = (sd + r) * sinphi; - - // Point on the circle on the pin sphere - Vec3d p (s(X) + rcos * a(X) + rsin * b(X), - s(Y) + rcos * a(Y) + rsin * b(Y), - s(Z) + rcos * a(Z) + rsin * b(Z)); - - auto hr = m.query_ray_hit(p + sd*dir, dir); - - if(ins_check && hr.is_inside()) { - if(hr.distance() > 2*r) phi = 0; - else { - // re-cast the ray from the outside of the object - auto hr2 = m.query_ray_hit(p + (hr.distance() + 2*sd)*dir, dir); - phi = hr2.distance(); - } - } else phi = hr.distance(); - }); - - auto mit = std::min_element(phis.begin(), phis.end()); - - return *mit; -} - -PointSet normals(const PointSet& points, const EigenMesh3D& mesh, +// Calculate the normals for the selected points (from 'points' set) on the +// mesh. This will call squared distance for each point. +PointSet normals(const PointSet& points, + const EigenMesh3D& mesh, double eps = 0.05, // min distance from edges - std::function throw_on_cancel = [](){}); + std::function throw_on_cancel = [](){}, + const std::vector& selected_points = {}); inline Vec2d to_vec2(const Vec3d& v3) { return {v3(X), v3(Y)}; @@ -763,11 +607,21 @@ bool operator==(const SpatElement& e1, const SpatElement& e2) { return e1.second == e2.second; } -// Clustering a set of points by the given criteria +// Clustering a set of points by the given distance. +ClusteredPoints cluster(const std::vector& indices, + std::function pointfn, + double dist, + unsigned max_points); + +ClusteredPoints cluster(const PointSet& points, + double dist, + unsigned max_points); + ClusteredPoints cluster( - const PointSet& points, - std::function pred, - unsigned max_points = 0); + const std::vector& indices, + std::function pointfn, + std::function predicate, + unsigned max_points); // This class will hold the support tree meshes with some additional bookkeeping // as well. Various parts of the support geometry are stored separately and are @@ -783,7 +637,7 @@ ClusteredPoints cluster( // The support pad is considered an auxiliary geometry and is not part of the // merged mesh. It can be retrieved using a dedicated method (pad()) class SLASupportTree::Impl { - std::vector m_heads; + std::map m_heads; std::vector m_pillars; std::vector m_junctions; std::vector m_bridges; @@ -801,16 +655,19 @@ public: const Controller& ctl() const { return m_ctl; } - template Head& add_head(Args&&... args) { - m_heads.emplace_back(std::forward(args)...); - m_heads.back().id = long(m_heads.size() - 1); + template Head& add_head(unsigned id, Args&&... args) { + auto el = m_heads.emplace(std::piecewise_construct, + std::forward_as_tuple(id), + std::forward_as_tuple(std::forward(args)...)); + el.first->second.id = id; meshcache_valid = false; - return m_heads.back(); + return el.first->second; } - template Pillar& add_pillar(long headid, Args&&... args) { - assert(headid >= 0 && headid < m_heads.size()); - Head& head = m_heads[size_t(headid)]; + template Pillar& add_pillar(unsigned headid, Args&&... args) { + auto it = m_heads.find(headid); + assert(it != m_heads.end()); + Head& head = it->second; m_pillars.emplace_back(head, std::forward(args)...); Pillar& pillar = m_pillars.back(); pillar.id = long(m_pillars.size() - 1); @@ -821,19 +678,45 @@ public: return m_pillars.back(); } - const Head& pillar_head(long pillar_id) const { - assert(pillar_id >= 0 && pillar_id < m_pillars.size()); - const Pillar& p = m_pillars[size_t(pillar_id)]; - assert(p.starts_from_head && p.start_junction_id >= 0 && - p.start_junction_id < m_heads.size() ); - return m_heads[size_t(p.start_junction_id)]; + void increment_bridges(const Pillar& pillar) { + assert(pillar.id >= 0 && size_t(pillar.id) < m_pillars.size()); + + if(pillar.id >= 0 && size_t(pillar.id) < m_pillars.size()) + m_pillars[size_t(pillar.id)].bridges++; } - const Pillar& head_pillar(long headid) const { - assert(headid >= 0 && headid < m_heads.size()); - const Head& h = m_heads[size_t(headid)]; - assert(h.pillar_id >= 0 && h.pillar_id < m_pillars.size()); - return m_pillars[size_t(h.pillar_id)]; + void increment_links(const Pillar& pillar) { + assert(pillar.id >= 0 && size_t(pillar.id) < m_pillars.size()); + + if(pillar.id >= 0 && size_t(pillar.id) < m_pillars.size()) + m_pillars[size_t(pillar.id)].links++; + } + + template Pillar& add_pillar(Args&&...args) + { + m_pillars.emplace_back(std::forward(args)...); + Pillar& pillar = m_pillars.back(); + pillar.id = long(m_pillars.size() - 1); + pillar.starts_from_head = false; + meshcache_valid = false; + return m_pillars.back(); + } + + const Head& pillar_head(long pillar_id) const { + assert(pillar_id >= 0 && pillar_id < long(m_pillars.size())); + const Pillar& p = m_pillars[size_t(pillar_id)]; + assert(p.starts_from_head && p.start_junction_id >= 0); + auto it = m_heads.find(unsigned(p.start_junction_id)); + assert(it != m_heads.end()); + return it->second; + } + + const Pillar& head_pillar(unsigned headid) const { + auto it = m_heads.find(headid); + assert(it != m_heads.end()); + const Head& h = it->second; + assert(h.pillar_id >= 0 && h.pillar_id < long(m_pillars.size())); + return pillar(h.pillar_id); } template const Junction& add_junction(Args&&... args) { @@ -858,8 +741,13 @@ public: return m_compact_bridges.back(); } - const std::vector& heads() const { return m_heads; } - Head& head(size_t idx) { meshcache_valid = false; return m_heads[idx]; } + const std::map& heads() const { return m_heads; } + Head& head(unsigned idx) { + meshcache_valid = false; + auto it = m_heads.find(idx); + assert(it != m_heads.end()); + return it->second; + } const std::vector& pillars() const { return m_pillars; } const std::vector& bridges() const { return m_bridges; } const std::vector& junctions() const { return m_junctions; } @@ -867,6 +755,13 @@ public: return m_compact_bridges; } + template inline const Pillar& pillar(T id) const { + static_assert(std::is_integral::value, "Invalid index type"); + assert(id >= 0 && id < m_pillars.size() && + id < std::numeric_limits::max()); + return m_pillars[size_t(id)]; + } + const Pad& create_pad(const TriangleMesh& object_supports, const ExPolygons& baseplate, const PoolConfig& cfg) { @@ -886,10 +781,10 @@ public: Contour3D merged; - for(auto& head : heads()) { + for(auto& headel : heads()) { if(m_ctl.stopcondition()) break; - if(head.is_valid()) - merged.merge(head.mesh); + if(headel.second.is_valid()) + merged.merge(headel.second.mesh); } for(auto& stick : pillars()) { @@ -950,6 +845,8 @@ public: }; +// This function returns the position of the centroid in the input 'clust' +// vector of point indices. template long cluster_centroid(const ClusterEl& clust, std::function pointfn, @@ -970,6 +867,9 @@ long cluster_centroid(const ClusterEl& clust, // distance for the two points and add the distance to the averages. // The point with the smallest average than wins. + // The complexity should be O(n^2) but we will mostly apply this function + // for small clusters only (cca 3 elements) + std::vector sel(clust.size(), false); // create full zero bitmask std::fill(sel.end() - 2, sel.end(), true); // insert the two ones std::vector avgs(clust.size(), 0.0); // store the average distances @@ -995,230 +895,519 @@ long cluster_centroid(const ClusterEl& clust, return long(minit - avgs.begin()); } -/** - * This function will calculate the convex hull of the input point set and - * return the indices of those points belonging to the chull in the right - * (counter clockwise) order. The input is also the set of indices and a - * functor to get the actual point form the index. - * - * I've adapted this algorithm from here: - * https://www.geeksforgeeks.org/convex-hull-set-1-jarviss-algorithm-or-wrapping/ - * and modified it so that it starts with the leftmost lower vertex. Also added - * support for floating point coordinates. - * - * This function is a modded version of the standard convex hull. If the points - * are all collinear with each other, it will return their indices in spatially - * subsequent order (the order they appear on the screen). - */ -ClusterEl pts_convex_hull(const ClusterEl& inpts, - std::function pfn) -{ - using Point = Vec2d; - using std::vector; - - static const double ERR = 1e-3; - - auto orientation = [](const Point& p, const Point& q, const Point& r) - { - double val = (q(Y) - p(Y)) * (r(X) - q(X)) - - (q(X) - p(X)) * (r(Y) - q(Y)); - - if (std::abs(val) < ERR) return 0; // collinear - return (val > ERR)? 1: 2; // clock or counterclockwise - }; - - size_t n = inpts.size(); - - if (n < 3) return inpts; - - // Initialize Result - ClusterEl hull; - vector points; points.reserve(n); - for(auto i : inpts) { - points.emplace_back(pfn(i)); - } - - // Check if the triplet of points is collinear. The standard convex hull - // algorithms are not capable of handling such input properly. - bool collinear = true; - for(auto one = points.begin(), two = std::next(one), three = std::next(two); - three != points.end() && collinear; - ++one, ++two, ++three) - { - // check if the points are collinear - if(orientation(*one, *two, *three) != 0) collinear = false; - } - - // Find the leftmost (bottom) point - size_t l = 0; - for (size_t i = 1; i < n; i++) { - if(std::abs(points[i](X) - points[l](X)) < ERR) { - if(points[i](Y) < points[l](Y)) l = i; - } - else if (points[i](X) < points[l](X)) l = i; - } - - if(collinear) { - // fill the output with the spatially ordered set of points. - - // find the direction - hull = inpts; - auto& lp = points[l]; - std::sort(hull.begin(), hull.end(), - [&lp, points](unsigned i1, unsigned i2) { - // compare the distance from the leftmost point - return distance(lp, points[i1]) < distance(lp, points[i2]); - }); - - return hull; - } - - // TODO: this algorithm is O(m*n) and O(n^2) in the worst case so it needs - // to be replaced with a graham scan or something O(nlogn) - - // Start from leftmost point, keep moving counterclockwise - // until reach the start point again. This loop runs O(h) - // times where h is number of points in result or output. - size_t p = l; - do - { - // Add current point to result - hull.push_back(inpts[p]); - - // Search for a point 'q' such that orientation(p, x, - // q) is counterclockwise for all points 'x'. The idea - // is to keep track of last visited most counterclock- - // wise point in q. If any point 'i' is more counterclock- - // wise than q, then update q. - size_t q = (p + 1) % n; - for (size_t i = 0; i < n; i++) - { - // If i is more counterclockwise than current q, then - // update q - if (orientation(points[p], points[i], points[q]) == 2) q = i; - } - - // Now q is the most counterclockwise with respect to p - // Set p as q for next iteration, so that q is added to - // result 'hull' - p = q; - - } while (p != l); // While we don't come to first point - - auto first = hull.front(); - hull.emplace_back(first); - - return hull; -} - -Vec3d dirv(const Vec3d& startp, const Vec3d& endp) { +inline Vec3d dirv(const Vec3d& startp, const Vec3d& endp) { return (endp - startp).normalized(); } -/// Generation of the supports, entry point function. This is called from the -/// SLASupportTree constructor and throws an SLASupportsStoppedException if it -/// gets canceled by the ctl object's stopcondition functor. -bool SLASupportTree::generate(const PointSet &points, - const EigenMesh3D& mesh, - const SupportConfig &cfg, - const Controller &ctl) -{ - // If there are no input points there is no point in doing anything - if(points.rows() == 0) return false; +class SLASupportTree::Algorithm { + const SupportConfig& m_cfg; + const EigenMesh3D& m_mesh; + const std::vector& m_support_pts; - PointSet filtered_points; // all valid support points - PointSet head_positions; // support points with pinhead - PointSet head_normals; // head normals - PointSet headless_positions; // headless support points - PointSet headless_normals; // headless support point normals + using PtIndices = std::vector; - using IndexSet = std::vector; + PtIndices m_iheads; // support points with pinhead + PtIndices m_iheadless; // headless support points - // Distances from head positions to ground or mesh touch points - std::vector head_heights; + // supp. pts. connecting to model: point index and the ray hit data + std::vector> m_iheads_onmodel; - // Indices of those who touch the ground - IndexSet ground_heads; + // normals for support points from model faces. + PointSet m_support_nmls; - // Indices of those who don't touch the ground - IndexSet noground_heads; - - // Groups of the 'ground_head' indices that belong into one cluster. These - // are candidates to be connected to one pillar. - ClusteredPoints ground_connectors; - - // A help function to translate ground head index to the actual coordinates. - auto gnd_head_pt = [&ground_heads, &head_positions] (size_t idx) { - return Vec3d(head_positions.row(ground_heads[idx])); - }; + // Clusters of points which can reach the ground directly and can be + // bridged to one central pillar + std::vector m_pillar_clusters; // This algorithm uses the Impl class as its output stream. It will be // filled gradually with support elements (heads, pillars, bridges, ...) using Result = SLASupportTree::Impl; - Result& result = *m_impl; - // Let's define the individual steps of the processing. We can experiment - // later with the ordering and the dependencies between them. - enum Steps { - BEGIN, - FILTER, - PINHEADS, - CLASSIFY, - ROUTING_GROUND, - ROUTING_NONGROUND, - HEADLESS, - DONE, - HALT, - ABORT, - NUM_STEPS - //... - }; + Result& m_result; + + // support points in Eigen/IGL format + PointSet m_points; // throw if canceled: It will be called many times so a shorthand will // come in handy. - auto& thr = ctl.cancelfn; + ThrowOnCancel m_thr; - // Filtering step: here we will discard inappropriate support points and - // decide the future of the appropriate ones. We will check if a pinhead - // is applicable and adjust its angle at each support point. - // We will also merge the support points that are just too close and can be - // considered as one. - auto filterfn = [thr] ( - const SupportConfig& cfg, - const PointSet& points, - const EigenMesh3D& mesh, - PointSet& filt_pts, - PointSet& head_norm, - PointSet& head_pos, - PointSet& headless_pos, - PointSet& headless_norm) + // A spatial index to easily find strong pillars to connect to. + SpatIndex m_pillar_index; + + inline double ray_mesh_intersect(const Vec3d& s, + const Vec3d& dir) { - // Get the points that are too close to each other and keep only the - // first one - auto aliases = - cluster(points, - [thr](const SpatElement& p, const SpatElement& se) - { - thr(); - return distance(p.first, se.first) < D_SP; - }, 2); + return m_mesh.query_ray_hit(s, dir).distance(); + } - filt_pts.resize(Eigen::Index(aliases.size()), 3); - int count = 0; - for(auto& a : aliases) { - // Here we keep only the front point of the cluster. - filt_pts.row(count++) = points.row(a.front()); + // This function will test if a future pinhead would not collide with the + // model geometry. It does not take a 'Head' object because those are + // created after this test. Parameters: s: The touching point on the model + // surface. dir: This is the direction of the head from the pin to the back + // r_pin, r_back: the radiuses of the pin and the back sphere width: This + // is the full width from the pin center to the back center m: The object + // mesh. + // The return value is the hit result from the ray casting. If the starting + // point was inside the model, an "invalid" hit_result will be returned + // with a zero distance value instead of a NAN. This way the result can + // be used safely for comparison with other distances. + EigenMesh3D::hit_result pinhead_mesh_intersect( + const Vec3d& s, + const Vec3d& dir, + double r_pin, + double r_back, + double width) + { + static const size_t SAMPLES = 8; + + // method based on: + // https://math.stackexchange.com/questions/73237/parametric-equation-of-a-circle-in-3d-space + + // We will shoot multiple rays from the head pinpoint in the direction + // of the pinhead robe (side) surface. The result will be the smallest + // hit distance. + + // Move away slightly from the touching point to avoid raycasting on the + // inner surface of the mesh. + Vec3d v = dir; // Our direction (axis) + Vec3d c = s + width * dir; + const double& sd = m_cfg.safety_distance_mm; + + // Two vectors that will be perpendicular to each other and to the + // axis. Values for a(X) and a(Y) are now arbitrary, a(Z) is just a + // placeholder. + Vec3d a(0, 1, 0), b; + + // The portions of the circle (the head-back circle) for which we will + // shoot rays. + std::array phis; + for(size_t i = 0; i < phis.size(); ++i) phis[i] = i*2*PI/phis.size(); + + auto& m = m_mesh; + using HitResult = EigenMesh3D::hit_result; + + // Hit results + std::array hits; + + // We have to address the case when the direction vector v (same as + // dir) is coincident with one of the world axes. In this case two of + // its components will be completely zero and one is 1.0. Our method + // becomes dangerous here due to division with zero. Instead, vector + // 'a' can be an element-wise rotated version of 'v' + auto chk1 = [] (double val) { + return std::abs(std::abs(val) - 1) < 1e-20; + }; + + if(chk1(v(X)) || chk1(v(Y)) || chk1(v(Z))) { + a = {v(Z), v(X), v(Y)}; + b = {v(Y), v(Z), v(X)}; + } + else { + a(Z) = -(v(Y)*a(Y)) / v(Z); a.normalize(); + b = a.cross(v); } - thr(); + // Now a and b vectors are perpendicular to v and to each other. + // Together they define the plane where we have to iterate with the + // given angles in the 'phis' vector + tbb::parallel_for(size_t(0), phis.size(), + [&phis, &hits, &m, sd, r_pin, r_back, s, a, b, c] + (size_t i) + { + double& phi = phis[i]; + double sinphi = std::sin(phi); + double cosphi = std::cos(phi); - // calculate the normals to the triangles belonging to filtered points - auto nmls = sla::normals(filt_pts, mesh, cfg.head_front_radius_mm, thr); + // Let's have a safety coefficient for the radiuses. + double rpscos = (sd + r_pin) * cosphi; + double rpssin = (sd + r_pin) * sinphi; + double rpbcos = (sd + r_back) * cosphi; + double rpbsin = (sd + r_back) * sinphi; - head_norm.resize(count, 3); - head_pos.resize(count, 3); - headless_pos.resize(count, 3); - headless_norm.resize(count, 3); + // Point on the circle on the pin sphere + Vec3d ps(s(X) + rpscos * a(X) + rpssin * b(X), + s(Y) + rpscos * a(Y) + rpssin * b(Y), + s(Z) + rpscos * a(Z) + rpssin * b(Z)); + + // Point ps is not on mesh but can be inside or outside as well. + // This would cause many problems with ray-casting. To detect the + // position we will use the ray-casting result (which has an + // is_inside predicate). + + // This is the point on the circle on the back sphere + Vec3d p(c(X) + rpbcos * a(X) + rpbsin * b(X), + c(Y) + rpbcos * a(Y) + rpbsin * b(Y), + c(Z) + rpbcos * a(Z) + rpbsin * b(Z)); + + Vec3d n = (p - ps).normalized(); + auto q = m.query_ray_hit(ps + sd*n, n); + + if(q.is_inside()) { // the hit is inside the model + if(q.distance() > r_pin + sd) { + // If we are inside the model and the hit distance is bigger + // than our pin circle diameter, it probably indicates that + // the support point was already inside the model, or there + // is really no space around the point. We will assign a + // zero hit distance to these cases which will enforce the + // function return value to be an invalid ray with zero hit + // distance. (see min_element at the end) + hits[i] = HitResult(0.0); + } + else { + // re-cast the ray from the outside of the object. + // The starting point has an offset of 2*safety_distance + // because the original ray has also had an offset + auto q2 = m.query_ray_hit(ps + (q.distance() + 2*sd)*n, n); + hits[i] = q2; + } + } else hits[i] = q; + }); + + auto mit = std::min_element(hits.begin(), hits.end()); + + return *mit; + } + + // Checking bridge (pillar and stick as well) intersection with the model. + // If the function is used for headless sticks, the ins_check parameter + // have to be true as the beginning of the stick might be inside the model + // geometry. + // The return value is the hit result from the ray casting. If the starting + // point was inside the model, an "invalid" hit_result will be returned + // with a zero distance value instead of a NAN. This way the result can + // be used safely for comparison with other distances. + EigenMesh3D::hit_result bridge_mesh_intersect( + const Vec3d& s, + const Vec3d& dir, + double r, + bool ins_check = false) + { + static const size_t SAMPLES = 8; + + // helper vector calculations + Vec3d a(0, 1, 0), b; + const double& sd = m_cfg.safety_distance_mm; + + // INFO: for explanation of the method used here, see the previous + // method's comments. + + auto chk1 = [] (double val) { + return std::abs(std::abs(val) - 1) < 1e-20; + }; + + if(chk1(dir(X)) || chk1(dir(Y)) || chk1(dir(Z))) { + a = {dir(Z), dir(X), dir(Y)}; + b = {dir(Y), dir(Z), dir(X)}; + } + else { + a(Z) = -(dir(Y)*a(Y)) / dir(Z); a.normalize(); + b = a.cross(dir); + } + + // circle portions + std::array phis; + for(size_t i = 0; i < phis.size(); ++i) phis[i] = i*2*PI/phis.size(); + + auto& m = m_mesh; + using HitResult = EigenMesh3D::hit_result; + + // Hit results + std::array hits; + + tbb::parallel_for(size_t(0), phis.size(), + [&m, &phis, a, b, sd, dir, r, s, ins_check, &hits] + (size_t i) + { + double& phi = phis[i]; + double sinphi = std::sin(phi); + double cosphi = std::cos(phi); + + // Let's have a safety coefficient for the radiuses. + double rcos = (sd + r) * cosphi; + double rsin = (sd + r) * sinphi; + + // Point on the circle on the pin sphere + Vec3d p (s(X) + rcos * a(X) + rsin * b(X), + s(Y) + rcos * a(Y) + rsin * b(Y), + s(Z) + rcos * a(Z) + rsin * b(Z)); + + auto hr = m.query_ray_hit(p + sd*dir, dir); + + if(ins_check && hr.is_inside()) { + if(hr.distance() > r + sd) hits[i] = HitResult(0.0); + else { + // re-cast the ray from the outside of the object + auto hr2 = + m.query_ray_hit(p + (hr.distance() + 2*sd)*dir, dir); + + hits[i] = hr2; + } + } else hits[i] = hr; + }); + + auto mit = std::min_element(hits.begin(), hits.end()); + + return *mit; + } + + // Helper function for interconnecting two pillars with zig-zag bridges. + bool interconnect(const Pillar& pillar, const Pillar& nextpillar) + { + // We need to get the starting point of the zig-zag pattern. We have to + // be aware that the two head junctions are at different heights. We + // may start from the lowest junction and call it a day but this + // strategy would leave unconnected a lot of pillar duos where the + // shorter pillar is too short to start a new bridge but the taller + // pillar could still be bridged with the shorter one. + bool was_connected = false; + + Vec3d supper = pillar.startpoint(); + Vec3d slower = nextpillar.startpoint(); + Vec3d eupper = pillar.endpoint(); + Vec3d elower = nextpillar.endpoint(); + + double zmin = m_result.ground_level + m_cfg.base_height_mm; + eupper(Z) = std::max(eupper(Z), zmin); + elower(Z) = std::max(elower(Z), zmin); + + // The usable length of both pillars should be positive + if(slower(Z) - elower(Z) < 0) return false; + if(supper(Z) - eupper(Z) < 0) return false; + + double pillar_dist = distance(Vec2d{slower(X), slower(Y)}, + Vec2d{supper(X), supper(Y)}); + double bridge_distance = pillar_dist / std::cos(-m_cfg.bridge_slope); + double zstep = pillar_dist * std::tan(-m_cfg.bridge_slope); + + if(pillar_dist < 2 * m_cfg.head_back_radius_mm || + pillar_dist > m_cfg.max_pillar_link_distance_mm) return false; + + if(supper(Z) < slower(Z)) supper.swap(slower); + if(eupper(Z) < elower(Z)) eupper.swap(elower); + + double startz = 0, endz = 0; + + startz = slower(Z) - zstep < supper(Z) ? slower(Z) - zstep : slower(Z); + endz = eupper(Z) + zstep > elower(Z) ? eupper(Z) + zstep : eupper(Z); + + if(slower(Z) - eupper(Z) < std::abs(zstep)) { + // no space for even one cross + + // Get max available space + startz = std::min(supper(Z), slower(Z) - zstep); + endz = std::max(eupper(Z) + zstep, elower(Z)); + + // Align to center + double available_dist = (startz - endz); + double rounds = std::floor(available_dist / std::abs(zstep)); + startz -= 0.5 * (available_dist - rounds * std::abs(zstep));; + } + + auto pcm = m_cfg.pillar_connection_mode; + bool docrosses = + pcm == PillarConnectionMode::cross || + (pcm == PillarConnectionMode::dynamic && + pillar_dist > 2*m_cfg.base_radius_mm); + + // 'sj' means starting junction, 'ej' is the end junction of a bridge. + // They will be swapped in every iteration thus the zig-zag pattern. + // According to a config parameter, a second bridge may be added which + // results in a cross connection between the pillars. + Vec3d sj = supper, ej = slower; sj(Z) = startz; ej(Z) = sj(Z) + zstep; + + // TODO: This is a workaround to not have a faulty last bridge + while(ej(Z) >= eupper(Z) /*endz*/) { + if(bridge_mesh_intersect(sj, + dirv(sj, ej), + pillar.r) >= bridge_distance) + { + m_result.add_bridge(sj, ej, pillar.r); + was_connected = true; + } + + // double bridging: (crosses) + if(docrosses) { + Vec3d sjback(ej(X), ej(Y), sj(Z)); + Vec3d ejback(sj(X), sj(Y), ej(Z)); + if(sjback(Z) <= slower(Z) && ejback(Z) >= eupper(Z) && + bridge_mesh_intersect(sjback, + dirv(sjback, ejback), + pillar.r) >= bridge_distance) + { + // need to check collision for the cross stick + m_result.add_bridge(sjback, ejback, pillar.r); + was_connected = true; + } + } + + sj.swap(ej); + ej(Z) = sj(Z) + zstep; + } + + return was_connected; + } + + // For connecting a head to a nearby pillar. + bool connect_to_nearpillar(const Head& head, long nearpillar_id) { + + auto nearpillar = [this, nearpillar_id]() { return m_result.pillar(nearpillar_id); }; + if(nearpillar().bridges > m_cfg.max_bridges_on_pillar) return false; + + Vec3d headjp = head.junction_point(); + Vec3d nearjp_u = nearpillar().startpoint(); + Vec3d nearjp_l = nearpillar().endpoint(); + + double r = head.r_back_mm; + double d2d = distance(to_2d(headjp), to_2d(nearjp_u)); + double d3d = distance(headjp, nearjp_u); + + double hdiff = nearjp_u(Z) - headjp(Z); + double slope = std::atan2(hdiff, d2d); + + Vec3d bridgestart = headjp; + Vec3d bridgeend = nearjp_u; + double max_len = m_cfg.max_bridge_length_mm; + double max_slope = m_cfg.bridge_slope; + double zdiff = 0.0; + + // check the default situation if feasible for a bridge + if(d3d > max_len || slope > -max_slope) { + // not feasible to connect the two head junctions. We have to search + // for a suitable touch point. + + double Zdown = headjp(Z) + d2d * std::tan(-max_slope); + Vec3d touchjp = bridgeend; touchjp(Z) = Zdown; + double D = distance(headjp, touchjp); + zdiff = Zdown - nearjp_u(Z); + + if(zdiff > 0) { + Zdown -= zdiff; + bridgestart(Z) -= zdiff; + touchjp(Z) = Zdown; + + double t = bridge_mesh_intersect(headjp, {0,0,-1}, r); + + // We can't insert a pillar under the source head to connect + // with the nearby pillar's starting junction + if(t < zdiff) return false; + } + + if(Zdown <= nearjp_u(Z) && Zdown >= nearjp_l(Z) && D < max_len) + bridgeend(Z) = Zdown; + else + return false; + } + + // There will be a minimum distance from the ground where the + // bridge is allowed to connect. This is an empiric value. + double minz = m_result.ground_level + 2 * m_cfg.head_width_mm; + if(bridgeend(Z) < minz) return false; + + double t = bridge_mesh_intersect(bridgestart, + dirv(bridgestart, bridgeend), r); + + // Cannot insert the bridge. (further search might not worth the hassle) + if(t < distance(bridgestart, bridgeend)) return false; + + // A partial pillar is needed under the starting head. + if(zdiff > 0) { + m_result.add_pillar(unsigned(head.id), bridgestart, r); + m_result.add_junction(bridgestart, r); + } + + m_result.add_bridge(bridgestart, bridgeend, r); + m_result.increment_bridges(nearpillar()); + + return true; + } + + bool search_pillar_and_connect(const Head& head) { + SpatIndex spindex = m_pillar_index; + + long nearest_id = -1; + + Vec3d querypoint = head.junction_point(); + + while(nearest_id < 0 && !spindex.empty()) { m_thr(); + // loop until a suitable head is not found + // if there is a pillar closer than the cluster center + // (this may happen as the clustering is not perfect) + // than we will bridge to this closer pillar + + Vec3d qp(querypoint(X), querypoint(Y), m_result.ground_level); + auto qres = spindex.nearest(qp, 1); + if(qres.empty()) break; + + auto ne = qres.front(); + nearest_id = ne.second; + + if(nearest_id >= 0) { + auto nearpillarID = unsigned(nearest_id); + if(nearpillarID < m_result.pillars().size()) { + if(!connect_to_nearpillar(head, nearpillarID)) { + nearest_id = -1; // continue searching + spindex.remove(ne); // without the current pillar + } + } + } + } + + return nearest_id >= 0; + } + +public: + + Algorithm(const SupportConfig& config, + const EigenMesh3D& emesh, + const std::vector& support_pts, + Result& result, + ThrowOnCancel thr) : + m_cfg(config), + m_mesh(emesh), + m_support_pts(support_pts), + m_support_nmls(support_pts.size(), 3), + m_result(result), + m_points(support_pts.size(), 3), + m_thr(thr) + { + // Prepare the support points in Eigen/IGL format as well, we will use + // it mostly in this form. + + long i = 0; + for(const SupportPoint& sp : m_support_pts) { + m_points.row(i)(X) = double(sp.pos(X)); + m_points.row(i)(Y) = double(sp.pos(Y)); + m_points.row(i)(Z) = double(sp.pos(Z)); + ++i; + } + } + + + // Now let's define the individual steps of the support generation algorithm + + // Filtering step: here we will discard inappropriate support points + // and decide the future of the appropriate ones. We will check if a + // pinhead is applicable and adjust its angle at each support point. We + // will also merge the support points that are just too close and can + // be considered as one. + void filter() { + // Get the points that are too close to each other and keep only the + // first one + auto aliases = cluster(m_points, D_SP, 2); + + PtIndices filtered_indices; + filtered_indices.reserve(aliases.size()); + m_iheads.reserve(aliases.size()); + m_iheadless.reserve(aliases.size()); + for(auto& a : aliases) { + // Here we keep only the front point of the cluster. + filtered_indices.emplace_back(a.front()); + } + + // calculate the normals to the triangles for filtered points + auto nmls = sla::normals(m_points, m_mesh, m_cfg.head_front_radius_mm, + m_thr, filtered_indices); // Not all of the support points have to be a valid position for // support creation. The angle may be inappropriate or there may @@ -1227,13 +1416,14 @@ bool SLASupportTree::generate(const PointSet &points, using libnest2d::opt::bound; using libnest2d::opt::initvals; - using libnest2d::opt::SimplexOptimizer; + using libnest2d::opt::GeneticOptimizer; using libnest2d::opt::StopCriteria; - static const unsigned MAX_TRIES = 100; - int pcount = 0, hlcount = 0; - for(int i = 0; i < count; i++) { - thr(); + for(unsigned i = 0, fidx = 0; i < filtered_indices.size(); ++i) + { + m_thr(); + + fidx = filtered_indices[i]; auto n = nmls.row(i); // for all normals we generate the spherical coordinates and @@ -1249,17 +1439,19 @@ bool SLASupportTree::generate(const PointSet &points, double azimuth = std::atan2(n(1), n(0)); // skip if the tilt is not sane - if(polar >= PI - cfg.normal_cutoff_angle) { + if(polar >= PI - m_cfg.normal_cutoff_angle) { // We saturate the polar angle to 3pi/4 polar = std::max(polar, 3*PI / 4); // save the head (pinpoint) position - Vec3d hp = filt_pts.row(i); + Vec3d hp = m_points.row(fidx); - double w = cfg.head_width_mm + - cfg.head_back_radius_mm + - 2*cfg.head_front_radius_mm; + double w = m_cfg.head_width_mm + + m_cfg.head_back_radius_mm + + 2*m_cfg.head_front_radius_mm; + + double pin_r = double(m_support_pts[fidx].head_front_radius); // Reassemble the now corrected normal auto nn = Vec3d(std::cos(azimuth) * std::sin(polar), @@ -1270,352 +1462,167 @@ bool SLASupportTree::generate(const PointSet &points, double t = pinhead_mesh_intersect( hp, // touching point nn, // normal - cfg.head_front_radius_mm, - cfg.head_back_radius_mm, - w, - mesh); + pin_r, + m_cfg.head_back_radius_mm, + w); if(t <= w) { - // Let's try to optimize this angle, there might be a viable - // normal that doesn't collide with the model geometry and - // its very close to the default. + + // Let's try to optimize this angle, there might be a + // viable normal that doesn't collide with the model + // geometry and its very close to the default. StopCriteria stc; - stc.max_iterations = MAX_TRIES; - stc.relative_score_difference = 1e-3; + stc.max_iterations = m_cfg.optimizer_max_iterations; + stc.relative_score_difference = m_cfg.optimizer_rel_score_diff; stc.stop_score = w; // space greater than w is enough - SimplexOptimizer solver(stc); + GeneticOptimizer solver(stc); + solver.seed(0); // we want deterministic behavior auto oresult = solver.optimize_max( - [&mesh, &cfg, w, hp](double plr, double azm) + [this, pin_r, w, hp](double plr, double azm) { auto n = Vec3d(std::cos(azm) * std::sin(plr), std::sin(azm) * std::sin(plr), std::cos(plr)).normalized(); - double score = pinhead_mesh_intersect( - hp, n, - cfg.head_front_radius_mm, - cfg.head_back_radius_mm, - w, - mesh); + double score = pinhead_mesh_intersect( hp, n, pin_r, + m_cfg.head_back_radius_mm, w); + return score; }, - initvals(polar, azimuth), // let's start with what we have + initvals(polar, azimuth), // start with what we have bound(3*PI/4, PI), // Must not exceed the tilt limit - bound(-PI, PI) // azimuth can be a full range search + bound(-PI, PI) // azimuth can be a full search ); - t = oresult.score; - polar = std::get<0>(oresult.optimum); - azimuth = std::get<1>(oresult.optimum); - nn = Vec3d(std::cos(azimuth) * std::sin(polar), - std::sin(azimuth) * std::sin(polar), - std::cos(polar)).normalized(); + if(oresult.score > w) { + polar = std::get<0>(oresult.optimum); + azimuth = std::get<1>(oresult.optimum); + nn = Vec3d(std::cos(azimuth) * std::sin(polar), + std::sin(azimuth) * std::sin(polar), + std::cos(polar)).normalized(); + t = oresult.score; + } } + // save the verified and corrected normal + m_support_nmls.row(fidx) = nn; + if(t > w) { - head_pos.row(pcount) = hp; - - // save the verified and corrected normal - head_norm.row(pcount) = nn; - - ++pcount; + // mark the point for needing a head. + m_iheads.emplace_back(fidx); } else if( polar >= 3*PI/4 ) { - // Headless supports do not tilt like the headed ones so // the normal should point almost to the ground. - headless_norm.row(hlcount) = nn; - headless_pos.row(hlcount++) = hp; + m_iheadless.emplace_back(fidx); } } } - head_pos.conservativeResize(pcount, Eigen::NoChange); - head_norm.conservativeResize(pcount, Eigen::NoChange); - headless_pos.conservativeResize(hlcount, Eigen::NoChange); - headless_norm.conservativeResize(hlcount, Eigen::NoChange); - }; + m_thr(); + } - // Pinhead creation: based on the filtering results, the Head objects will - // be constructed (together with their triangle meshes). - auto pinheadfn = [thr] ( - const SupportConfig& cfg, - PointSet& head_pos, - PointSet& nmls, - Result& result - ) + // Pinhead creation: based on the filtering results, the Head objects + // will be constructed (together with their triangle meshes). + void add_pinheads() { - - /* ******************************************************** */ - /* Generating Pinheads */ - /* ******************************************************** */ - - for (int i = 0; i < head_pos.rows(); ++i) { - thr(); - result.add_head( - cfg.head_back_radius_mm, - cfg.head_front_radius_mm, - cfg.head_width_mm, - cfg.head_penetration_mm, - nmls.row(i), // dir - head_pos.row(i) // displacement + for (unsigned i : m_iheads) { + m_thr(); + m_result.add_head( + i, + m_cfg.head_back_radius_mm, + m_support_pts[i].head_front_radius, + m_cfg.head_width_mm, + m_cfg.head_penetration_mm, + m_support_nmls.row(i), // dir + m_support_pts[i].pos.cast() // displacement ); } - }; + } // Further classification of the support points with pinheads. If the - // ground is directly reachable through a vertical line parallel to the Z - // axis we consider a support point as pillar candidate. If touches the - // model geometry, it will be marked as non-ground facing and further steps - // will process it. Also, the pillars will be grouped into clusters that can - // be interconnected with bridges. Elements of these groups may or may not - // be interconnected. Here we only run the clustering algorithm. - auto classifyfn = [thr] ( - const SupportConfig& cfg, - const EigenMesh3D& mesh, - PointSet& head_pos, - IndexSet& gndidx, - IndexSet& nogndidx, - std::vector& gndheight, - ClusteredPoints& ground_clusters, - Result& result - ) + // ground is directly reachable through a vertical line parallel to the + // Z axis we consider a support point as pillar candidate. If touches + // the model geometry, it will be marked as non-ground facing and + // further steps will process it. Also, the pillars will be grouped + // into clusters that can be interconnected with bridges. Elements of + // these groups may or may not be interconnected. Here we only run the + // clustering algorithm. + void classify() { - - /* ******************************************************** */ - /* Classification */ - /* ******************************************************** */ - // We should first get the heads that reach the ground directly - gndheight.reserve(size_t(head_pos.rows())); - gndidx.reserve(size_t(head_pos.rows())); - nogndidx.reserve(size_t(head_pos.rows())); + PtIndices ground_head_indices; + ground_head_indices.reserve(m_iheads.size()); + m_iheads_onmodel.reserve(m_iheads.size()); // First we decide which heads reach the ground and can be full - // pillars and which shall be connected to the model surface (or search - // a suitable path around the surface that leads to the ground -- TODO) - for(unsigned i = 0; i < head_pos.rows(); i++) { - thr(); - auto& head = result.head(i); + // pillars and which shall be connected to the model surface (or + // search a suitable path around the surface that leads to the + // ground -- TODO) + for(unsigned i : m_iheads) { + m_thr(); - Vec3d dir(0, 0, -1); - bool accept = false; - int ri = 1; - double t = std::numeric_limits::infinity(); - double hw = head.width_mm; + auto& head = m_result.head(i); + Vec3d n(0, 0, -1); + double r = head.r_back_mm; + Vec3d headjp = head.junction_point(); + // collision check + auto hit = bridge_mesh_intersect(headjp, n, r); - { -// using libnest2d::opt::Method; -// using libnest2d::opt::bound; -// using libnest2d::opt::Optimizer; -// using libnest2d::opt::TOptimizer; -// using libnest2d::opt::StopCriteria; - -// auto stopcond = [] () { return false; }; -// static const unsigned max_tries = 100; - -// auto objfunc = -// [&head](double polar, double azimuth, double width) -// { -// Vec3d nn(std::cos(azimuth) * std::sin(polar), -// std::sin(azimuth) * std::sin(polar), -// std::cos(polar)); - - -// }; - -// StopCriteria stc; -// stc.max_iterations = max_tries; -// stc.relative_score_difference = 1e-3; -// stc.stop_condition = stopcond; -// TOptimizer solver(stc); - } - - - // We will try to assign a pillar to all the pinheads. If a pillar - // would pierce the model surface, we will try to adjust slightly - // the head width so that the pillar can be deployed. - while(!accept && head.width_mm > 0) { - - Vec3d startpoint = head.junction_point(); - - // Collision detection - t = bridge_mesh_intersect(startpoint, dir, head.r_back_mm, mesh); - - // Precise distance measurement - double tprec = ray_mesh_intersect(startpoint, dir, mesh); - - if(std::isinf(tprec) && !std::isinf(t)) { - // This is a damned case where the pillar melts into the - // model but its center ray can reach the ground. We can - // not route this to the ground nor to the model surface. - head.width_mm = hw + (ri % 2? -1 : 1) * ri * head.r_back_mm; - } else { - if(!std::isinf(t) && !std::isinf(tprec) && - std::abs(tprec - t) > hw) - { - // In this case the head would scratch the model body - BOOST_LOG_TRIVIAL(warning) << "Head scratch detected."; - } - - accept = true; t = tprec; - - auto id = head.id; - // We need to regenerate the head geometry - head = Head(head.r_back_mm, - head.r_pin_mm, - head.width_mm, - head.penetration_mm, - head.dir, - head.tr); - head.id = id; - } - - ri++; - } - - // Save the distance from a surface in the Z axis downwards. It may - // be infinity but that is telling us that it touches the ground. - gndheight.emplace_back(t); - - if(accept) { - if(std::isinf(t)) gndidx.emplace_back(i); - else nogndidx.emplace_back(i); - } else { - // This is a serious issue. There was no way to deploy a pillar - // for the given pinhead. The whole thing has to be discarded - // leaving the model potentially unprintable. - // - // TODO: In the future this has to be solved by searching for - // a path in 3D space from this support point to a suitable - // pillar position or an existing pillar. - // As a workaround we could mark this head as "sidehead only" - // let it go trough the nearby pillar search in the next step. - BOOST_LOG_TRIVIAL(warning) << "A support point at " - << head.tr.transpose() - << " had to be discarded as there is" - << " nowhere to route it."; - head.invalidate(); + if(std::isinf(hit.distance())) ground_head_indices.emplace_back(i); + else { + if(m_cfg.ground_facing_only) head.invalidate(); + m_iheads_onmodel.emplace_back(std::make_pair(i, hit)); } } - // Transform the ground facing point indices top actual coordinates. - PointSet gnd(gndidx.size(), 3); - for(size_t i = 0; i < gndidx.size(); i++) - gnd.row(long(i)) = head_pos.row(gndidx[i]); + // We want to search for clusters of points that are far enough + // from each other in the XY plane to not cross their pillar bases + // These clusters of support points will join in one pillar, + // possibly in their centroid support point. + auto pointfn = [this](unsigned i) { + return m_result.head(i).junction_point(); + }; + auto predicate = [this](const SpatElement& e1, const SpatElement& e2) { + double d2d = distance(to_2d(e1.first), to_2d(e2.first)); + double d3d = distance(e1.first, e2.first); + return d2d < 2 * m_cfg.base_radius_mm && + d3d < m_cfg.max_bridge_length_mm; + }; + m_pillar_clusters = cluster(ground_head_indices, pointfn, predicate, + m_cfg.max_bridges_on_pillar); + } - // We want to search for clusters of points that are far enough from - // each other in the XY plane to not cross their pillar bases - // These clusters of support points will join in one pillar, possibly in - // their centroid support point. - auto d_base = 2*cfg.base_radius_mm; - ground_clusters = - cluster( - gnd, - [d_base, thr](const SpatElement& p, const SpatElement& s) - { - thr(); - return distance(Vec2d(p.first(X), p.first(Y)), - Vec2d(s.first(X), s.first(Y))) < d_base; - }, 3); // max 3 heads to connect to one centroid - }; - - // Helper function for interconnecting two pillars with zig-zag bridges. - // This is not an individual step. - auto interconnect = [&cfg]( - const Pillar& pillar, - const Pillar& nextpillar, - const EigenMesh3D& emesh, - Result& result) + // Step: Routing the ground connected pinheads, and interconnecting + // them with additional (angled) bridges. Not all of these pinheads + // will be a full pillar (ground connected). Some will connect to a + // nearby pillar using a bridge. The max number of such side-heads for + // a central pillar is limited to avoid bad weight distribution. + void routing_to_ground() { - const Head& phead = result.pillar_head(pillar.id); - const Head& nextphead = result.pillar_head(nextpillar.id); - - Vec3d sj = phead.junction_point(); - sj(Z) = std::min(sj(Z), nextphead.junction_point()(Z)); - Vec3d ej = nextpillar.endpoint; - double pillar_dist = distance(Vec2d{sj(X), sj(Y)}, - Vec2d{ej(X), ej(Y)}); - double zstep = pillar_dist * std::tan(-cfg.tilt); - ej(Z) = sj(Z) + zstep; - - double chkd = bridge_mesh_intersect(sj, dirv(sj, ej), pillar.r, emesh); - double bridge_distance = pillar_dist / std::cos(-cfg.tilt); - - // If the pillars are so close that they touch each other, - // there is no need to bridge them together. - if(pillar_dist > 2*cfg.head_back_radius_mm && - bridge_distance < cfg.max_bridge_length_mm) - while(sj(Z) > pillar.endpoint(Z) + cfg.base_radius_mm && - ej(Z) > nextpillar.endpoint(Z) + cfg.base_radius_mm) - { - if(chkd >= bridge_distance) { - result.add_bridge(sj, ej, pillar.r); - - auto pcm = cfg.pillar_connection_mode; - - // double bridging: (crosses) - if( pcm == PillarConnectionMode::cross || - (pcm == PillarConnectionMode::dynamic && - pillar_dist > 2*cfg.base_radius_mm)) - { - // If the columns are close together, no need to - // double bridge them - Vec3d bsj(ej(X), ej(Y), sj(Z)); - Vec3d bej(sj(X), sj(Y), ej(Z)); - - // need to check collision for the cross stick - double backchkd = bridge_mesh_intersect(bsj, - dirv(bsj, bej), - pillar.r, - emesh); - - - if(backchkd >= bridge_distance) { - result.add_bridge(bsj, bej, pillar.r); - } - } - } - sj.swap(ej); - ej(Z) = sj(Z) + zstep; - chkd = bridge_mesh_intersect(sj, dirv(sj, ej), pillar.r, emesh); - } - }; - - // Step: Routing the ground connected pinheads, and interconnecting them - // with additional (angled) bridges. Not all of these pinheads will be - // a full pillar (ground connected). Some will connect to a nearby pillar - // using a bridge. The max number of such side-heads for a central pillar - // is limited to avoid bad weight distribution. - auto routing_ground_fn = [gnd_head_pt, interconnect, thr]( - const SupportConfig& cfg, - const ClusteredPoints& gnd_clusters, - const IndexSet& gndidx, - const EigenMesh3D& emesh, - Result& result) - { - const double hbr = cfg.head_back_radius_mm; - const double pradius = cfg.head_back_radius_mm; - const double maxbridgelen = cfg.max_bridge_length_mm; - const double gndlvl = result.ground_level; + const double pradius = m_cfg.head_back_radius_mm; + const double gndlvl = m_result.ground_level; ClusterEl cl_centroids; - cl_centroids.reserve(gnd_clusters.size()); + cl_centroids.reserve(m_pillar_clusters.size()); + + for(auto& cl : m_pillar_clusters) { m_thr(); + // place all the centroid head positions into the index. We + // will query for alternative pillar positions. If a sidehead + // cannot connect to the cluster centroid, we have to search + // for another head with a full pillar. Also when there are two + // elements in the cluster, the centroid is arbitrary and the + // sidehead is allowed to connect to a nearby pillar to + // increase structural stability. - SpatIndex pheadindex; // spatial index for the junctions - for(auto& cl : gnd_clusters) { thr(); - // place all the centroid head positions into the index. We will - // query for alternative pillar positions. If a sidehead cannot - // connect to the cluster centroid, we have to search for another - // head with a full pillar. Also when there are two elements in the - // cluster, the centroid is arbitrary and the sidehead is allowed to - // connect to a nearby pillar to increase structural stability. if(cl.empty()) continue; // get the current cluster centroid - long lcid = cluster_centroid(cl, gnd_head_pt, + auto& thr = m_thr; const auto& points = m_points; + long lcid = cluster_centroid(cl, + [&points](size_t idx) { return points.row(long(idx)); }, [thr](const Vec3d& p1, const Vec3d& p2) { thr(); @@ -1623,313 +1630,439 @@ bool SLASupportTree::generate(const PointSet &points, }); assert(lcid >= 0); - auto cid = unsigned(lcid); + unsigned hid = cl[size_t(lcid)]; // Head ID - cl_centroids.push_back(unsigned(cid)); + cl_centroids.emplace_back(hid); - unsigned hid = gndidx[cl[cid]]; // Head index - Head& h = result.head(hid); + Head& h = m_result.head(hid); h.transform(); Vec3d p = h.junction_point(); p(Z) = gndlvl; + auto& plr = m_result.add_pillar(hid, p, h.r_back_mm) + .add_base(m_cfg.base_height_mm, + m_cfg.base_radius_mm); - pheadindex.insert(p, hid); + // Save the pillar endpoint and the pillar id in the spatial index + m_pillar_index.insert(plr.endpoint(), unsigned(plr.id)); } // now we will go through the clusters ones again and connect the // sidepoints with the cluster centroid (which is a ground pillar) // or a nearby pillar if the centroid is unreachable. size_t ci = 0; - for(auto cl : gnd_clusters) { thr(); + for(auto cl : m_pillar_clusters) { m_thr(); - auto cidx = cl_centroids[ci]; - cl_centroids[ci++] = cl[cidx]; + auto cidx = cl_centroids[ci++]; - size_t index_to_heads = gndidx[cl[cidx]]; - auto& head = result.head(index_to_heads); + // TODO: don't consider the cluster centroid but calculate a + // central position where the pillar can be placed. this way + // the weight is distributed more effectively on the pillar. - Vec3d startpoint = head.junction_point(); - auto endpoint = startpoint; endpoint(Z) = gndlvl; + auto centerpillarID = m_result.head_pillar(cidx).id; - // Create the central pillar of the cluster with its base on the - // ground - result.add_pillar(long(index_to_heads), endpoint, pradius) - .add_base(cfg.base_height_mm, cfg.base_radius_mm); + for(auto c : cl) { m_thr(); + if(c == cidx) continue; - // Process side point in current cluster - cl.erase(cl.begin() + cidx); // delete the centroid before looping - - // TODO: dont consider the cluster centroid but calculate a central - // position where the pillar can be placed. this way the weight - // is distributed more effectively on the pillar. - - auto search_nearest = - [&thr, &cfg, &result, &emesh, maxbridgelen, gndlvl, pradius] - (SpatIndex& spindex, const Vec3d& jsh) - { - long nearest_id = -1; - const double max_len = maxbridgelen / 2; - while(nearest_id < 0 && !spindex.empty()) { thr(); - // loop until a suitable head is not found - // if there is a pillar closer than the cluster center - // (this may happen as the clustering is not perfect) - // than we will bridge to this closer pillar - - Vec3d qp(jsh(X), jsh(Y), gndlvl); - auto ne = spindex.nearest(qp, 1).front(); - const Head& nearhead = result.heads()[ne.second]; - - Vec3d jh = nearhead.junction_point(); - Vec3d jp = jsh; - double dist2d = distance(qp, ne.first); - - // Bridge endpoint on the main pillar - Vec3d jn(jh(X), jh(Y), jp(Z) + dist2d*std::tan(-cfg.tilt)); - - if(jn(Z) > jh(Z)) { - // If the sidepoint cannot connect to the pillar from - // its head junction, then just skip this pillar. - spindex.remove(ne); - continue; - } - - double d = distance(jp, jn); - - if(jn(Z) <= gndlvl + 2*cfg.head_width_mm || d > max_len) - break; - - double chkd = bridge_mesh_intersect(jp, dirv(jp, jn), - pradius, - emesh); - if(chkd >= d) nearest_id = ne.second; - - spindex.remove(ne); - } - return nearest_id; - }; - - for(auto c : cl) { thr(); - auto& sidehead = result.head(gndidx[c]); + auto& sidehead = m_result.head(c); sidehead.transform(); - Vec3d jsh = sidehead.junction_point(); - SpatIndex spindex = pheadindex; - long nearest_id = search_nearest(spindex, jsh); - - // at this point we either have our pillar index or we have - // to connect the sidehead to the ground - if(nearest_id < 0) { + if(!connect_to_nearpillar(sidehead, centerpillarID) && + !search_pillar_and_connect(sidehead)) + { + Vec3d pstart = sidehead.junction_point(); + Vec3d pend = Vec3d{pstart(X), pstart(Y), gndlvl}; // Could not find a pillar, create one - Vec3d jp = jsh; jp(Z) = gndlvl; - result.add_pillar(sidehead.id, jp, pradius). - add_base(cfg.base_height_mm, cfg.base_radius_mm); + auto& pillar = m_result.add_pillar(unsigned(sidehead.id), + pend, pradius) + .add_base(m_cfg.base_height_mm, + m_cfg.base_radius_mm); // connects to ground, eligible for bridging - cl_centroids.emplace_back(c); - } else { - // Creating the bridge to the nearest pillar - - const Head& nearhead = result.heads()[size_t(nearest_id)]; - Vec3d jp = jsh; - Vec3d jh = nearhead.junction_point(); - - double d = distance(Vec2d{jp(X), jp(Y)}, - Vec2d{jh(X), jh(Y)}); - Vec3d jn(jh(X), jh(Y), jp(Z) + d*std::tan(-cfg.tilt)); - - if(jn(Z) > jh(Z)) { - double hdiff = jn(Z) - jh(Z); - jp(Z) -= hdiff; - jn(Z) -= hdiff; - - // pillar without base, this does not connect to ground. - result.add_pillar(sidehead.id, jp, pradius); - } - - if(jp(Z) < jsh(Z)) result.add_junction(jp, hbr); - if(jn(Z) >= jh(Z)) result.add_junction(jn, hbr); - double r_pillar = sidehead.request_pillar_radius(pradius); - result.add_bridge(jp, jn, r_pillar); + m_pillar_index.insert(pend, unsigned(pillar.id)); } } } - - // We will break down the pillar positions in 2D into concentric rings. - // Connecting the pillars belonging to the same ring will prevent - // bridges from crossing each other. After bridging the rings we can - // create bridges between the rings without the possibility of crossing - // bridges. Two pillars will be bridged with X shaped stick pairs. - // If they are really close to each other, than only one stick will be - // used in zig-zag mode. - - // Breaking down the points into rings will be done with a modified - // convex hull algorithm (see pts_convex_hull()), that works for - // collinear points as well. If the points are on the same surface, - // they can be part of an imaginary line segment for which the convex - // hull is not defined. I this case it is enough to sort the points - // spatially and create the bridge stick from the one endpoint to - // another. - - ClusterEl rem = cl_centroids; - ClusterEl ring; - - while(!rem.empty()) { // loop until all the points belong to some ring - thr(); - std::sort(rem.begin(), rem.end()); - - auto newring = pts_convex_hull(rem, - [gnd_head_pt](unsigned i) { - auto&& p = gnd_head_pt(i); - return Vec2d(p(X), p(Y)); // project to 2D in along Z axis - }); - - if(!ring.empty()) { - // inner ring is now in 'newring' and outer ring is in 'ring' - SpatIndex innerring; - for(unsigned i : newring) { thr(); - const Pillar& pill = result.head_pillar(gndidx[i]); - assert(pill.id >= 0); - innerring.insert(pill.endpoint, unsigned(pill.id)); - } - - // For all pillars in the outer ring find the closest in the - // inner ring and connect them. This will create the spider web - // fashioned connections between pillars - for(unsigned i : ring) { thr(); - const Pillar& outerpill = result.head_pillar(gndidx[i]); - auto res = innerring.nearest(outerpill.endpoint, 1); - if(res.empty()) continue; - - auto ne = res.front(); - const Pillar& innerpill = result.pillars()[ne.second]; - interconnect(outerpill, innerpill, emesh, result); - } - } - - // no need for newring anymore in the current iteration - ring.swap(newring); - - /*std::cout << "ring: \n"; - for(auto ri : ring) { - std::cout << ri << " " << " X = " << gnd_head_pt(ri)(X) - << " Y = " << gnd_head_pt(ri)(Y) << std::endl; - } - std::cout << std::endl;*/ - - // now the ring has to be connected with bridge sticks - for(auto it = ring.begin(), next = std::next(it); - next != ring.end(); - ++it, ++next) - { - thr(); - const Pillar& pillar = result.head_pillar(gndidx[*it]); - const Pillar& nextpillar = result.head_pillar(gndidx[*next]); - interconnect(pillar, nextpillar, emesh, result); - } - - auto sring = ring; ClusterEl tmp; - std::sort(sring.begin(), sring.end()); - std::set_difference(rem.begin(), rem.end(), - sring.begin(), sring.end(), - std::back_inserter(tmp)); - rem.swap(tmp); - } - }; + } // Step: routing the pinheads that would connect to the model surface // along the Z axis downwards. For now these will actually be connected with // the model surface with a flipped pinhead. In the future here we could use // some smart algorithms to search for a safe path to the ground or to a // nearby pillar that can hold the supported weight. - auto routing_nongnd_fn = [thr]( - const SupportConfig& cfg, - const std::vector& gndheight, - const IndexSet& nogndidx, - Result& result) + void routing_to_model() { - // TODO: connect these to the ground pillars if possible - for(auto idx : nogndidx) { thr(); - double gh = gndheight[idx]; - double base_width = cfg.head_width_mm; - auto& head = result.head(idx); + // We need to check if there is an easy way out to the bed surface. + // If it can be routed there with a bridge shorter than + // min_bridge_distance. - // In this case there is no room for the base pinhead. - if(gh < head.fullwidth()) { - double min_l = - 2 * cfg.head_front_radius_mm + - 2 * cfg.head_back_radius_mm - cfg.head_penetration_mm; - - base_width = gh - min_l; - } - - if(base_width < 0) { - // There is really no space for even a reduced size head. We - // have to replace that with a small half sphere that touches - // the model surface. (TODO) - head.invalidate(); - continue; - } + // First we want to index the available pillars. The best is to connect + // these points to the available pillars + auto routedown = [this](Head& head, const Vec3d& dir, double dist) + { head.transform(); + Vec3d hjp = head.junction_point(); + Vec3d endp = hjp + dist * dir; + m_result.add_bridge(hjp, endp, head.r_back_mm); + m_result.add_junction(endp, head.r_back_mm); - Vec3d headend = head.junction_point(); + auto groundp = endp; + groundp(Z) = m_result.ground_level; + auto& newpillar = m_result.add_pillar(endp, groundp, head.r_back_mm) + .add_base(m_cfg.base_height_mm, + m_cfg.base_radius_mm); + m_pillar_index.insert(groundp, unsigned(newpillar.id)); + }; - Head base_head(cfg.head_back_radius_mm, - cfg.head_front_radius_mm, - base_width, - cfg.head_penetration_mm, - {0.0, 0.0, 1.0}, - {headend(X), headend(Y), headend(Z) - gh}); + std::vector modelpillars; - base_head.transform(); + // TODO: connect these to the ground pillars if possible + for(auto item : m_iheads_onmodel) { m_thr(); + unsigned idx = item.first; + EigenMesh3D::hit_result hit = item.second; - // Robustness check: - if(headend(Z) < base_head.junction_point()(Z)) { - // This should not happen it is against all assumptions - BOOST_LOG_TRIVIAL(warning) - << "Ignoring invalid supports connecting to model body"; - head.invalidate(); + auto& head = m_result.head(idx); + Vec3d hjp = head.junction_point(); + + // ///////////////////////////////////////////////////////////////// + // Search nearby pillar + // ///////////////////////////////////////////////////////////////// + + if(search_pillar_and_connect(head)) { head.transform(); continue; } + + // ///////////////////////////////////////////////////////////////// + // Try straight path + // ///////////////////////////////////////////////////////////////// + + // Cannot connect to nearby pillar. We will try to search for + // a route to the ground. + + double t = bridge_mesh_intersect(hjp, head.dir, head.r_back_mm); + double d = 0, tdown = 0; + Vec3d dirdown(0.0, 0.0, -1.0); + + t = std::min(t, m_cfg.max_bridge_length_mm); + + while(d < t && !std::isinf(tdown = bridge_mesh_intersect( + hjp + d*head.dir, + dirdown, head.r_back_mm))) { + d += head.r_back_mm; + } + + if(std::isinf(tdown)) { // we heave found a route to the ground + routedown(head, head.dir, d); continue; + } + + // ///////////////////////////////////////////////////////////////// + // Optimize bridge direction + // ///////////////////////////////////////////////////////////////// + + // Straight path failed so we will try to search for a suitable + // direction out of the cavity. + + // Get the spherical representation of the normal. its easier to + // work with. + double z = head.dir(Z); + double r = 1.0; // for normalized vector + double polar = std::acos(z / r); + double azimuth = std::atan2(head.dir(Y), head.dir(X)); + + using libnest2d::opt::bound; + using libnest2d::opt::initvals; + using libnest2d::opt::GeneticOptimizer; + using libnest2d::opt::StopCriteria; + + StopCriteria stc; + stc.max_iterations = m_cfg.optimizer_max_iterations; + stc.relative_score_difference = m_cfg.optimizer_rel_score_diff; + stc.stop_score = 1e6; + GeneticOptimizer solver(stc); + solver.seed(0); // we want deterministic behavior + + double r_back = head.r_back_mm; + + auto oresult = solver.optimize_max( + [this, hjp, r_back](double plr, double azm) + { + Vec3d n = Vec3d(std::cos(azm) * std::sin(plr), + std::sin(azm) * std::sin(plr), + std::cos(plr)).normalized(); + return bridge_mesh_intersect(hjp, n, r_back); + }, + initvals(polar, azimuth), // let's start with what we have + bound(3*PI/4, PI), // Must not exceed the slope limit + bound(-PI, PI) // azimuth can be a full range search + ); + + d = 0; t = oresult.score; + + polar = std::get<0>(oresult.optimum); + azimuth = std::get<1>(oresult.optimum); + Vec3d bridgedir = Vec3d(std::cos(azimuth) * std::sin(polar), + std::sin(azimuth) * std::sin(polar), + std::cos(polar)).normalized(); + + t = std::min(t, m_cfg.max_bridge_length_mm); + + while(d < t && !std::isinf(tdown = bridge_mesh_intersect( + hjp + d*bridgedir, + dirdown, + head.r_back_mm))) { + d += head.r_back_mm; + } + + if(std::isinf(tdown)) { // we heave found a route to the ground + routedown(head, bridgedir, d); continue; + } + + // ///////////////////////////////////////////////////////////////// + // Route to model body + // ///////////////////////////////////////////////////////////////// + + double zangle = std::asin(hit.direction()(Z)); + zangle = std::max(zangle, PI/4); + double h = std::sin(zangle) * head.fullwidth(); + + // The width of the tail head that we would like to have... + h = std::min(hit.distance() - head.r_back_mm, h); + + if(h > 0) { + Vec3d endp{hjp(X), hjp(Y), hjp(Z) - hit.distance() + h}; + auto center_hit = m_mesh.query_ray_hit(hjp, dirdown); + + double hitdiff = center_hit.distance() - hit.distance(); + Vec3d hitp = std::abs(hitdiff) < 2*head.r_back_mm? + center_hit.position() : hit.position(); + + head.transform(); + + Pillar& pill = m_result.add_pillar(unsigned(head.id), + endp, + head.r_back_mm); + + Vec3d taildir = endp - hitp; + double dist = distance(endp, hitp) + m_cfg.head_penetration_mm; + double w = dist - 2 * head.r_pin_mm - head.r_back_mm; + + Head tailhead(head.r_back_mm, + head.r_pin_mm, + w, + m_cfg.head_penetration_mm, + taildir, + hitp); + + tailhead.transform(); + pill.base = tailhead.mesh; + + // Experimental: add the pillar to the index for cascading + modelpillars.emplace_back(unsigned(pill.id)); continue; } - double hl = base_head.fullwidth() - head.r_back_mm; - - result.add_pillar(idx, - Vec3d{headend(X), headend(Y), headend(Z) - gh + hl}, - cfg.head_back_radius_mm - ).base = base_head.mesh; + // We have failed to route this head. + BOOST_LOG_TRIVIAL(warning) + << "Failed to route model facing support point." + << " ID: " << idx; + head.invalidate(); } - }; + + for(auto pillid : modelpillars) { + auto& pillar = m_result.pillar(pillid); + m_pillar_index.insert(pillar.endpoint(), pillid); + } + } + + void cascade_pillars() { + // Now comes the algorithm that connects pillars with each other. + // Ideally every pillar should be connected with at least one of its + // neighbors if that neighbor is within max_pillar_link_distance + + // Pillars with height exceeding H1 will require at least one neighbor + // to connect with. Height exceeding H2 require two neighbors. + double H1 = m_cfg.max_solo_pillar_height_mm; + double H2 = m_cfg.max_dual_pillar_height_mm; + double d = m_cfg.max_pillar_link_distance_mm; + + //A connection between two pillars only counts if the height ratio is + // bigger than 50% + double min_height_ratio = 0.5; + + std::set pairs; + + auto cascadefn = + [this, d, &pairs, min_height_ratio, H1] (const SpatElement& el) + { + Vec3d qp = el.first; + + const Pillar& pillar = m_result.pillar(el.second); + + unsigned neighbors = m_cfg.pillar_cascade_neighbors; + + // connections are enough for one pillar + if(pillar.links >= neighbors) return; + + // Query all remaining points within reach + auto qres = m_pillar_index.query([qp, d](const SpatElement& e){ + return distance(e.first, qp) < d; + }); + + // sort the result by distance (have to check if this is needed) + std::sort(qres.begin(), qres.end(), + [qp](const SpatElement& e1, const SpatElement& e2){ + return distance(e1.first, qp) < distance(e2.first, qp); + }); + + for(auto& re : qres) { + + if(re.second == el.second) continue; + + auto a = el.second, b = re.second; + + // I hope that the area of a square is never equal to its + // circumference + auto hashval = 2 * (a + b) + a * b; + + if(pairs.find(hashval) != pairs.end()) continue; + + const Pillar& neighborpillar = m_result.pillars()[re.second]; + + // this neighbor is occupied + if(neighborpillar.links >= neighbors) continue; + + if(interconnect(pillar, neighborpillar)) { + pairs.insert(hashval); + + // If the interconnection length between the two pillars is + // less than 50% of the longer pillar's height, don't count + if(pillar.height < H1 || + neighborpillar.height / pillar.height > min_height_ratio) + m_result.increment_links(pillar); + + if(neighborpillar.height < H1 || + pillar.height / neighborpillar.height > min_height_ratio) + m_result.increment_links(neighborpillar); + + } + + // connections are enough for one pillar + if(pillar.links >= neighbors) break; + } + }; + + m_pillar_index.foreach(cascadefn); + + size_t pillarcount = m_result.pillars().size(); + + for(size_t pid = 0; pid < pillarcount; pid++) { + auto pillar = [this, pid]() { return m_result.pillar(pid); }; + + unsigned needpillars = 0; + if(pillar().bridges > m_cfg.max_bridges_on_pillar) needpillars = 3; + else if(pillar().links < 2 && pillar().height > H2) { + // Not enough neighbors to support this pillar + needpillars = 2 - pillar().links; + } + else if(pillar().links < 1 && pillar().height > H1) { + // No neighbors could be found and the pillar is too long. + needpillars = 1; + } + + // Search for new pillar locations + bool found = false; + double alpha = 0; // goes to 2Pi + double r = 2 * m_cfg.base_radius_mm; + Vec3d pillarsp = pillar().startpoint(); + Vec3d sp(pillarsp(X), pillarsp(Y), pillarsp(Z) - r); + std::vector tv(needpillars, false); + std::vector spts(needpillars); + + while(!found && alpha < 2*PI) { + + for(unsigned n = 0; n < needpillars; n++) { + double a = alpha + n * PI/3; + Vec3d s = sp; + s(X) += std::cos(a) * r; + s(Y) += std::sin(a) * r; + spts[n] = s; + auto hr = bridge_mesh_intersect(s, {0, 0, -1}, pillar().r); + tv[n] = std::isinf(hr.distance()); + } + + found = std::all_of(tv.begin(), tv.end(), [](bool v){return v;}); + + // 20 angles will be tried... + alpha += 0.1 * PI; + } + + std::vector newpills; + newpills.reserve(needpillars); + + if(found) for(unsigned n = 0; n < needpillars; n++) { + Vec3d s = spts[n]; double gnd = m_result.ground_level; + Pillar p(s, Vec3d(s(X), s(Y), gnd), pillar().r); + p.add_base(m_cfg.base_height_mm, m_cfg.base_radius_mm); + + if(interconnect(pillar(), p)) { + Pillar& pp = m_result.add_pillar(p); + m_pillar_index.insert(pp.endpoint(), unsigned(pp.id)); + + m_result.add_junction(s, pillar().r); + double t = bridge_mesh_intersect(pillarsp, + dirv(pillarsp, s), + pillar().r); + if(distance(pillarsp, s) < t) + m_result.add_bridge(pillarsp, s, pillar().r); + + if(pillar().endpoint()(Z) > m_result.ground_level) + m_result.add_junction(pillar().endpoint(), pillar().r); + + newpills.emplace_back(pp.id); + m_result.increment_links(pillar()); + } + } + + if(!newpills.empty()) { + for(auto it = newpills.begin(), nx = std::next(it); + nx != newpills.end(); ++it, ++nx) { + const Pillar& itpll = m_result.pillar(*it); + const Pillar& nxpll = m_result.pillar(*nx); + if(interconnect(itpll, nxpll)) { + m_result.increment_links(itpll); + m_result.increment_links(nxpll); + } + } + + m_pillar_index.foreach(cascadefn); + } + } + } // Step: process the support points where there is not enough space for a // full pinhead. In this case we will use a rounded sphere as a touching // point and use a thinner bridge (let's call it a stick). - auto process_headless = [thr]( - const SupportConfig& cfg, - const PointSet& headless_pts, - const PointSet& headless_norm, - const EigenMesh3D& emesh, - Result& result) + void routing_headless () { // For now we will just generate smaller headless sticks with a sharp // ending point that connects to the mesh surface. - const double R = cfg.headless_pillar_radius_mm; - const double HWIDTH_MM = R/3; - // We will sink the pins into the model surface for a distance of 1/3 of // the pin radius - for(int i = 0; i < headless_pts.rows(); i++) { thr(); - Vec3d sph = headless_pts.row(i); // Exact support position - Vec3d n = headless_norm.row(i); // mesh outward normal + for(unsigned i : m_iheadless) { m_thr(); + + const auto R = double(m_support_pts[i].head_front_radius); + const double HWIDTH_MM = R/3; + + // Exact support position + Vec3d sph = m_support_pts[i].pos.cast(); + Vec3d n = m_support_nmls.row(i); // mesh outward normal Vec3d sp = sph - n * HWIDTH_MM; // stick head start point Vec3d dir = {0, 0, -1}; Vec3d sj = sp + R * n; // stick start point // This is only for checking - double idist = bridge_mesh_intersect(sph, dir, R, emesh, true); - double dist = ray_mesh_intersect(sj, dir, emesh); + double idist = bridge_mesh_intersect(sph, dir, R, true); + double dist = ray_mesh_intersect(sj, dir); if(std::isinf(idist) || std::isnan(idist) || idist < 2*R || std::isinf(dist) || std::isnan(dist) || dist < 2*R) { @@ -1940,94 +2073,93 @@ bool SLASupportTree::generate(const PointSet &points, } Vec3d ej = sj + (dist + HWIDTH_MM)* dir; - result.add_compact_bridge(sp, ej, n, R); + m_result.add_compact_bridge(sp, ej, n, R); + } + } +}; + +bool SLASupportTree::generate(const std::vector &support_points, + const EigenMesh3D& mesh, + const SupportConfig &cfg, + const Controller &ctl) +{ + if(support_points.empty()) return false; + + Algorithm alg(cfg, mesh, support_points, *m_impl, ctl.cancelfn); + + // Let's define the individual steps of the processing. We can experiment + // later with the ordering and the dependencies between them. + enum Steps { + BEGIN, + FILTER, + PINHEADS, + CLASSIFY, + ROUTING_GROUND, + ROUTING_NONGROUND, + CASCADE_PILLARS, + HEADLESS, + DONE, + ABORT, + NUM_STEPS + //... + }; + + // Collect the algorithm steps into a nice sequence + std::array, NUM_STEPS> program = { + [] () { + // Begin... + // Potentially clear up the shared data (not needed for now) + }, + + std::bind(&Algorithm::filter, &alg), + + std::bind(&Algorithm::add_pinheads, &alg), + + std::bind(&Algorithm::classify, &alg), + + std::bind(&Algorithm::routing_to_ground, &alg), + + std::bind(&Algorithm::routing_to_model, &alg), + + std::bind(&Algorithm::cascade_pillars, &alg), + + std::bind(&Algorithm::routing_headless, &alg), + + [] () { + // Done + }, + + [] () { + // Abort } }; - // Now that the individual blocks are defined, lets connect the wires. We - // will create an array of functions which represents a program. Place the - // step methods in the array and bind the right arguments to the methods - // This way the data dependencies will be easily traceable between - // individual steps. - // There will be empty steps as well like the begin step or the done or - // abort steps. These are slots for future initialization or cleanup. + Steps pc = BEGIN; - using std::cref; // Bind inputs with cref (read-only) - using std::ref; // Bind outputs with ref (writable) - using std::bind; - - // Here we can easily track what goes in and what comes out of each step: - // (see the cref-s as inputs and ref-s as outputs) - std::array, NUM_STEPS> program = { - [] () { - // Begin... - // Potentially clear up the shared data (not needed for now) - }, - - // Filtering unnecessary support points - bind(filterfn, cref(cfg), cref(points), cref(mesh), - ref(filtered_points), ref(head_normals), - ref(head_positions), ref(headless_positions), ref(headless_normals)), - - // Pinhead generation - bind(pinheadfn, cref(cfg), - ref(head_positions), ref(head_normals), ref(result)), - - // Classification of support points - bind(classifyfn, cref(cfg), cref(mesh), - ref(head_positions), ref(ground_heads), ref(noground_heads), - ref(head_heights), ref(ground_connectors), ref(result)), - - // Routing ground connecting clusters - bind(routing_ground_fn, - cref(cfg), cref(ground_connectors), cref(ground_heads), cref(mesh), - ref(result)), - - // routing non ground connecting support points - bind(routing_nongnd_fn, cref(cfg), cref(head_heights), cref(noground_heads), - ref(result)), - - bind(process_headless, - cref(cfg), cref(headless_positions), - cref(headless_normals), cref(mesh), - ref(result)), - [] () { - // Done - }, - [] () { - // Halt - }, - [] () { - // Abort - } - }; - - if(cfg.ground_facing_only) { // Delete the non-gnd steps if necessary + if(cfg.ground_facing_only) { program[ROUTING_NONGROUND] = []() { - BOOST_LOG_TRIVIAL(info) << "Skipping non-ground facing supports as " - "requested."; + BOOST_LOG_TRIVIAL(info) + << "Skipping model-facing supports as requested."; }; - program[HEADLESS] = [](){ - BOOST_LOG_TRIVIAL(info) << "Skipping headless stick generation as " - "requested"; + program[HEADLESS] = []() { + BOOST_LOG_TRIVIAL(info) << "Skipping headless stick generation as" + " requested."; }; } - Steps pc = BEGIN, pc_prev = BEGIN; - // Let's define a simple automaton that will run our program. - auto progress = [&ctl, &pc, &pc_prev] () { + auto progress = [&ctl, &pc] () { static const std::array stepstr { - "Starting", - "Filtering", - "Generate pinheads", - "Classification", - "Routing to ground", - "Routing supports to model surface", - "Processing small holes", - "Done", - "Halt", - "Abort" + L("Starting"), + L("Filtering"), + L("Generate pinheads"), + L("Classification"), + L("Routing to ground"), + L("Routing supports to model surface"), + L("Cascading pillars"), + L("Processing small holes"), + L("Done"), + L("Abort") }; static const std::array stepstate { @@ -2038,8 +2170,8 @@ bool SLASupportTree::generate(const PointSet &points, 60, 70, 80, + 90, 100, - 0, 0 }; @@ -2051,9 +2183,9 @@ bool SLASupportTree::generate(const PointSet &points, case PINHEADS: pc = CLASSIFY; break; case CLASSIFY: pc = ROUTING_GROUND; break; case ROUTING_GROUND: pc = ROUTING_NONGROUND; break; - case ROUTING_NONGROUND: pc = HEADLESS; break; + case ROUTING_NONGROUND: pc = CASCADE_PILLARS; break; + case CASCADE_PILLARS: pc = HEADLESS; break; case HEADLESS: pc = DONE; break; - case HALT: pc = pc_prev; break; case DONE: case ABORT: break; default: ; @@ -2062,13 +2194,11 @@ bool SLASupportTree::generate(const PointSet &points, }; // Just here we run the computation... - while(pc < DONE || pc == HALT) { + while(pc < DONE) { progress(); program[pc](); } - if(pc == ABORT) throw SLASupportsStoppedException(); - return pc == ABORT; } @@ -2131,7 +2261,7 @@ void SLASupportTree::remove_pad() m_impl->remove_pad(); } -SLASupportTree::SLASupportTree(const PointSet &points, +SLASupportTree::SLASupportTree(const std::vector &points, const EigenMesh3D& emesh, const SupportConfig &cfg, const Controller &ctl): @@ -2152,8 +2282,5 @@ SLASupportTree &SLASupportTree::operator=(const SLASupportTree &c) SLASupportTree::~SLASupportTree() {} -SLASupportsStoppedException::SLASupportsStoppedException(): - std::runtime_error("") {} - } } diff --git a/src/libslic3r/SLA/SLASupportTree.hpp b/src/libslic3r/SLA/SLASupportTree.hpp index c29b2a571..74d7da9ca 100644 --- a/src/libslic3r/SLA/SLASupportTree.hpp +++ b/src/libslic3r/SLA/SLASupportTree.hpp @@ -50,11 +50,6 @@ struct SupportConfig { // Width in mm from the back sphere center to the front sphere center. double head_width_mm = 1.0; - // Radius in mm of the support pillars. The actual radius of the pillars - // beginning with a head will not be higher than head_back_radius but the - // headless pillars will have half of this value. - double headless_pillar_radius_mm = 0.4; - // How to connect pillars PillarConnectionMode pillar_connection_mode = PillarConnectionMode::dynamic; @@ -74,18 +69,34 @@ struct SupportConfig { double base_height_mm = 1.0; // The default angle for connecting support sticks and junctions. - double tilt = M_PI/4; + double bridge_slope = M_PI/4; // The max length of a bridge in mm - double max_bridge_length_mm = 15.0; + double max_bridge_length_mm = 10.0; + + // The max distance of a pillar to pillar link. + double max_pillar_link_distance_mm = 10.0; // The elevation in Z direction upwards. This is the space between the pad // and the model object's bounding box bottom. double object_elevation_mm = 10; - // The max Z angle for a normal at which it will get completely ignored. - double normal_cutoff_angle = 150.0 * M_PI / 180.0; + // ///////////////////////////////////////////////////////////////////////// + // Compile time configuration values (candidates for runtime) + // ///////////////////////////////////////////////////////////////////////// + // The max Z angle for a normal at which it will get completely ignored. + static const double normal_cutoff_angle; + + // The shortest distance of any support structure from the model surface + static const double safety_distance_mm; + + static const double max_solo_pillar_height_mm; + static const double max_dual_pillar_height_mm; + static const double optimizer_rel_score_diff; + static const unsigned optimizer_max_iterations; + static const unsigned pillar_cascade_neighbors; + static const unsigned max_bridges_on_pillar; }; struct PoolConfig; @@ -116,21 +127,14 @@ using PointSet = Eigen::MatrixXd; //EigenMesh3D to_eigenmesh(const ModelObject& model); // Simple conversion of 'vector of points' to an Eigen matrix -PointSet to_point_set(const std::vector&); +//PointSet to_point_set(const std::vector&); /* ************************************************************************** */ -/// Just a wrapper to the runtime error to be recognizable in try blocks -class SLASupportsStoppedException: public std::runtime_error { -public: - using std::runtime_error::runtime_error; - SLASupportsStoppedException(); -}; - /// The class containing mesh data for the generated supports. class SLASupportTree { - class Impl; + class Impl; // persistent support data std::unique_ptr m_impl; Impl& get() { return *m_impl; } @@ -140,16 +144,25 @@ class SLASupportTree { const SupportConfig&, const Controller&); - /// Generate the 3D supports for a model intended for SLA print. - bool generate(const PointSet& pts, + // The generation algorithm is quite long and will be captured in a separate + // class with private data, helper methods, etc... This data is only needed + // during the calculation whereas the Impl class contains the persistent + // data, mostly the meshes. + class Algorithm; + + // Generate the 3D supports for a model intended for SLA print. This + // will instantiate the Algorithm class and call its appropriate methods + // with status indication. + bool generate(const std::vector& pts, const EigenMesh3D& mesh, const SupportConfig& cfg = {}, const Controller& ctl = {}); + public: SLASupportTree(); - SLASupportTree(const PointSet& pts, + SLASupportTree(const std::vector& pts, const EigenMesh3D& em, const SupportConfig& cfg = {}, const Controller& ctl = {}); diff --git a/src/libslic3r/SLA/SLASupportTreeIGL.cpp b/src/libslic3r/SLA/SLASupportTreeIGL.cpp index 25638fe69..c368b8604 100644 --- a/src/libslic3r/SLA/SLASupportTreeIGL.cpp +++ b/src/libslic3r/SLA/SLASupportTreeIGL.cpp @@ -17,6 +17,8 @@ #include #include +#include + #include "SLASpatIndex.hpp" #include "ClipperUtils.hpp" @@ -89,6 +91,11 @@ size_t SpatIndex::size() const return m_impl->m_store.size(); } +void SpatIndex::foreach(std::function fn) +{ + for(auto& el : m_impl->m_store) fn(el); +} + /* **************************************************************************** * EigenMesh3D implementation * ****************************************************************************/ @@ -167,6 +174,7 @@ EigenMesh3D::query_ray_hit(const Vec3d &s, const Vec3d &dir) const hit_result ret(*this); ret.m_t = double(hit.t); ret.m_dir = dir; + ret.m_source = s; if(!std::isinf(hit.t) && !std::isnan(hit.t)) ret.m_face_id = hit.id; return ret; @@ -186,6 +194,15 @@ bool EigenMesh3D::inside(const Vec3d &p) const { } #endif /* SLIC3R_SLA_NEEDS_WINDTREE */ +double EigenMesh3D::squared_distance(const Vec3d &p, int& i, Vec3d& c) const { + double sqdst = 0; + Eigen::Matrix pp = p; + Eigen::Matrix cc; + sqdst = m_aabb->squared_distance(m_V, m_F, pp, i, cc); + c = cc; + return sqdst; +} + /* **************************************************************************** * Misc functions * ****************************************************************************/ @@ -208,22 +225,31 @@ template double distance(const Vec& pp1, const Vec& pp2) { PointSet normals(const PointSet& points, const EigenMesh3D& mesh, double eps, - std::function throw_on_cancel) + std::function thr, // throw on cancel + const std::vector& pt_indices = {}) { if(points.rows() == 0 || mesh.V().rows() == 0 || mesh.F().rows() == 0) return {}; - Eigen::VectorXd dists; - Eigen::VectorXi I; - PointSet C; + std::vector range = pt_indices; + if(range.empty()) { + range.resize(size_t(points.rows()), 0); + std::iota(range.begin(), range.end(), 0); + } - igl::point_mesh_squared_distance( points, mesh.V(), mesh.F(), dists, I, C); + PointSet ret(range.size(), 3); - PointSet ret(I.rows(), 3); - for(int i = 0; i < I.rows(); i++) { - throw_on_cancel(); - auto idx = I(i); - auto trindex = mesh.F().row(idx); + tbb::parallel_for(size_t(0), range.size(), + [&ret, &range, &mesh, &points, thr, eps](size_t ridx) + { + thr(); + auto eidx = Eigen::Index(range[ridx]); + int faceid = 0; + Vec3d p; + + mesh.squared_distance(points.row(eidx), faceid, p); + + auto trindex = mesh.F().row(faceid); const Vec3d& p1 = mesh.V().row(trindex(0)); const Vec3d& p2 = mesh.V().row(trindex(1)); @@ -237,8 +263,6 @@ PointSet normals(const PointSet& points, // of its triangle. The procedure is the same, get the neighbor // triangles and calculate an average normal. - const Vec3d& p = C.row(i); - // mark the vertex indices of the edge. ia and ib marks and edge ic // will mark a single vertex. int ia = -1, ib = -1, ic = -1; @@ -266,7 +290,7 @@ PointSet normals(const PointSet& points, std::vector neigh; if(ic >= 0) { // The point is right on a vertex of the triangle for(int n = 0; n < mesh.F().rows(); ++n) { - throw_on_cancel(); + thr(); Vec3i ni = mesh.F().row(n); if((ni(X) == ic || ni(Y) == ic || ni(Z) == ic)) neigh.emplace_back(ni); @@ -275,7 +299,7 @@ PointSet normals(const PointSet& points, else if(ia >= 0 && ib >= 0) { // the point is on and edge // now get all the neigboring triangles for(int n = 0; n < mesh.F().rows(); ++n) { - throw_on_cancel(); + thr(); Vec3i ni = mesh.F().row(n); if((ni(X) == ia || ni(Y) == ia || ni(Z) == ia) && (ni(X) == ib || ni(Y) == ib || ni(Z) == ib)) @@ -316,52 +340,32 @@ PointSet normals(const PointSet& points, Vec3d sumnorm(0, 0, 0); sumnorm = std::accumulate(neighnorms.begin(), lend, sumnorm); sumnorm.normalize(); - ret.row(i) = sumnorm; + ret.row(long(ridx)) = sumnorm; } else { // point lies safely within its triangle Eigen::Vector3d U = p2 - p1; Eigen::Vector3d V = p3 - p1; - ret.row(i) = U.cross(V).normalized(); + ret.row(long(ridx)) = U.cross(V).normalized(); } - } + }); return ret; } +namespace bgi = boost::geometry::index; +using Index3D = bgi::rtree< SpatElement, bgi::rstar<16, 4> /* ? */ >; -// Clustering a set of points by the given criteria -ClusteredPoints cluster( - const sla::PointSet& points, - std::function pred, - unsigned max_points = 0) +ClusteredPoints cluster(Index3D& sindex, unsigned max_points, + std::function(const Index3D&, const SpatElement&)> qfn) { - - namespace bgi = boost::geometry::index; - using Index3D = bgi::rtree< SpatElement, bgi::rstar<16, 4> /* ? */ >; - - // A spatial index for querying the nearest points - Index3D sindex; - - // Build the index - for(unsigned idx = 0; idx < points.rows(); idx++) - sindex.insert( std::make_pair(points.row(idx), idx)); - using Elems = std::vector; // Recursive function for visiting all the points in a given distance to // each other std::function group = - [&sindex, &group, pred, max_points](Elems& pts, Elems& cluster) + [&sindex, &group, max_points, qfn](Elems& pts, Elems& cluster) { for(auto& p : pts) { - std::vector tmp; - - sindex.query( - bgi::satisfies([p, pred](const SpatElement& se) { - return pred(p, se); - }), - std::back_inserter(tmp) - ); - + std::vector tmp = qfn(sindex, p); auto cmp = [](const SpatElement& e1, const SpatElement& e2){ return e1.second < e2.second; }; @@ -405,5 +409,84 @@ ClusteredPoints cluster( return result; } +namespace { +std::vector distance_queryfn(const Index3D& sindex, + const SpatElement& p, + double dist, + unsigned max_points) +{ + std::vector tmp; tmp.reserve(max_points); + sindex.query( + bgi::nearest(p.first, max_points), + std::back_inserter(tmp) + ); + + for(auto it = tmp.begin(); it < tmp.end(); ++it) + if(distance(p.first, it->first) > dist) it = tmp.erase(it); + + return tmp; +} +} + +// Clustering a set of points by the given criteria +ClusteredPoints cluster( + const std::vector& indices, + std::function pointfn, + double dist, + unsigned max_points) +{ + // A spatial index for querying the nearest points + Index3D sindex; + + // Build the index + for(auto idx : indices) sindex.insert( std::make_pair(pointfn(idx), idx)); + + return cluster(sindex, max_points, + [dist, max_points](const Index3D& sidx, const SpatElement& p) + { + return distance_queryfn(sidx, p, dist, max_points); + }); +} + +// Clustering a set of points by the given criteria +ClusteredPoints cluster( + const std::vector& indices, + std::function pointfn, + std::function predicate, + unsigned max_points) +{ + // A spatial index for querying the nearest points + Index3D sindex; + + // Build the index + for(auto idx : indices) sindex.insert( std::make_pair(pointfn(idx), idx)); + + return cluster(sindex, max_points, + [max_points, predicate](const Index3D& sidx, const SpatElement& p) + { + std::vector tmp; tmp.reserve(max_points); + sidx.query(bgi::satisfies([p, predicate](const SpatElement& e){ + return predicate(p, e); + }), std::back_inserter(tmp)); + return tmp; + }); +} + +ClusteredPoints cluster(const PointSet& pts, double dist, unsigned max_points) +{ + // A spatial index for querying the nearest points + Index3D sindex; + + // Build the index + for(Eigen::Index i = 0; i < pts.rows(); i++) + sindex.insert(std::make_pair(Vec3d(pts.row(i)), unsigned(i))); + + return cluster(sindex, max_points, + [dist, max_points](const Index3D& sidx, const SpatElement& p) + { + return distance_queryfn(sidx, p, dist, max_points); + }); +} + } } diff --git a/src/libslic3r/SLAPrint.cpp b/src/libslic3r/SLAPrint.cpp index 23880cfa9..83fa61fdd 100644 --- a/src/libslic3r/SLAPrint.cpp +++ b/src/libslic3r/SLAPrint.cpp @@ -118,6 +118,9 @@ SLAPrint::ApplyStatus SLAPrint::apply(const Model &model, const DynamicPrintConf // Make a copy of the config, normalize it. DynamicPrintConfig config(config_in); + config.option("sla_print_settings_id", true); + config.option("sla_material_settings_id", true); + config.option("printer_settings_id", true); config.normalize(); // Collect changes to print config. t_config_option_keys print_diff = m_print_config.diff(config); @@ -151,9 +154,9 @@ SLAPrint::ApplyStatus SLAPrint::apply(const Model &model, const DynamicPrintConf PlaceholderParser &pp = this->placeholder_parser(); pp.apply_config(config); // Set the profile aliases for the PrintBase::output_filename() - pp.set("print_preset", config_in.option("sla_print_settings_id")->clone()); - pp.set("material_preset", config_in.option("sla_material_settings_id")->clone()); - pp.set("printer_preset", config_in.option("printer_settings_id")->clone()); + pp.set("print_preset", config.option("sla_print_settings_id")->clone()); + pp.set("material_preset", config.option("sla_material_settings_id")->clone()); + pp.set("printer_preset", config.option("printer_settings_id")->clone()); } // It is also safe to change m_config now after this->invalidate_state_by_config_options() call. @@ -300,81 +303,82 @@ SLAPrint::ApplyStatus SLAPrint::apply(const Model &model, const DynamicPrintConf auto it_status = model_object_status.find(ModelObjectStatus(model_object.id())); assert(it_status != model_object_status.end()); assert(it_status->status != ModelObjectStatus::Deleted); - if (it_status->status == ModelObjectStatus::New) - // PrintObject instances will be added in the next loop. - continue; - // Update the ModelObject instance, possibly invalidate the linked PrintObjects. - assert(it_status->status == ModelObjectStatus::Old || it_status->status == ModelObjectStatus::Moved); - const ModelObject &model_object_new = *model.objects[idx_model_object]; - auto it_print_object_status = print_object_status.lower_bound(PrintObjectStatus(model_object.id())); - if (it_print_object_status != print_object_status.end() && it_print_object_status->id != model_object.id()) - it_print_object_status = print_object_status.end(); - // Check whether a model part volume was added or removed, their transformations or order changed. - bool model_parts_differ = model_volume_list_changed(model_object, model_object_new, ModelVolumeType::MODEL_PART); - bool sla_trafo_differs = model_object.instances.empty() != model_object_new.instances.empty() || - (! model_object.instances.empty() && ! sla_trafo(model_object).isApprox(sla_trafo(model_object_new))); - if (model_parts_differ || sla_trafo_differs) { - // The very first step (the slicing step) is invalidated. One may freely remove all associated PrintObjects. - if (it_print_object_status != print_object_status.end()) { - update_apply_status(it_print_object_status->print_object->invalidate_all_steps()); - const_cast(*it_print_object_status).status = PrintObjectStatus::Deleted; - } - // Copy content of the ModelObject including its ID, do not change the parent. - model_object.assign_copy(model_object_new); - } else { - // Synchronize Object's config. - bool object_config_changed = model_object.config != model_object_new.config; - if (object_config_changed) - model_object.config = model_object_new.config; - if (! object_diff.empty() || object_config_changed) { - SLAPrintObjectConfig new_config = m_default_object_config; - normalize_and_apply_config(new_config, model_object.config); - if (it_print_object_status != print_object_status.end()) { - t_config_option_keys diff = it_print_object_status->print_object->config().diff(new_config); - if (! diff.empty()) { - update_apply_status(it_print_object_status->print_object->invalidate_state_by_config_options(diff)); - it_print_object_status->print_object->config_apply_only(new_config, diff, true); - } - } - } - /*if (model_object.sla_support_points != model_object_new.sla_support_points) { - model_object.sla_support_points = model_object_new.sla_support_points; - if (it_print_object_status != print_object_status.end()) - update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); - } - if (model_object.sla_points_status != model_object_new.sla_points_status) { - // Change of this status should invalidate support points. The points themselves are not enough, there are none - // in case that nothing was generated OR that points were autogenerated already and not copied to the front-end. - // These cases can only be differentiated by checking the status change. However, changing from 'Generating' should NOT - // invalidate - that would keep stopping the background processing without a reason. - if (model_object.sla_points_status != sla::PointsStatus::Generating) - if (it_print_object_status != print_object_status.end()) - update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); - model_object.sla_points_status = model_object_new.sla_points_status; - }*/ + // PrintObject for this ModelObject, if it exists. + auto it_print_object_status = print_object_status.end(); + if (it_status->status != ModelObjectStatus::New) { + // Update the ModelObject instance, possibly invalidate the linked PrintObjects. + assert(it_status->status == ModelObjectStatus::Old || it_status->status == ModelObjectStatus::Moved); + const ModelObject &model_object_new = *model.objects[idx_model_object]; + it_print_object_status = print_object_status.lower_bound(PrintObjectStatus(model_object.id())); + if (it_print_object_status != print_object_status.end() && it_print_object_status->id != model_object.id()) + it_print_object_status = print_object_status.end(); + // Check whether a model part volume was added or removed, their transformations or order changed. + bool model_parts_differ = model_volume_list_changed(model_object, model_object_new, ModelVolumeType::MODEL_PART); + bool sla_trafo_differs = model_object.instances.empty() != model_object_new.instances.empty() || + (! model_object.instances.empty() && ! sla_trafo(model_object).isApprox(sla_trafo(model_object_new))); + if (model_parts_differ || sla_trafo_differs) { + // The very first step (the slicing step) is invalidated. One may freely remove all associated PrintObjects. + if (it_print_object_status != print_object_status.end()) { + update_apply_status(it_print_object_status->print_object->invalidate_all_steps()); + const_cast(*it_print_object_status).status = PrintObjectStatus::Deleted; + } + // Copy content of the ModelObject including its ID, do not change the parent. + model_object.assign_copy(model_object_new); + } else { + // Synchronize Object's config. + bool object_config_changed = model_object.config != model_object_new.config; + if (object_config_changed) + model_object.config = model_object_new.config; + if (! object_diff.empty() || object_config_changed) { + SLAPrintObjectConfig new_config = m_default_object_config; + normalize_and_apply_config(new_config, model_object.config); + if (it_print_object_status != print_object_status.end()) { + t_config_option_keys diff = it_print_object_status->print_object->config().diff(new_config); + if (! diff.empty()) { + update_apply_status(it_print_object_status->print_object->invalidate_state_by_config_options(diff)); + it_print_object_status->print_object->config_apply_only(new_config, diff, true); + } + } + } + /*if (model_object.sla_support_points != model_object_new.sla_support_points) { + model_object.sla_support_points = model_object_new.sla_support_points; + if (it_print_object_status != print_object_status.end()) + update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); + } + if (model_object.sla_points_status != model_object_new.sla_points_status) { + // Change of this status should invalidate support points. The points themselves are not enough, there are none + // in case that nothing was generated OR that points were autogenerated already and not copied to the front-end. + // These cases can only be differentiated by checking the status change. However, changing from 'Generating' should NOT + // invalidate - that would keep stopping the background processing without a reason. + if (model_object.sla_points_status != sla::PointsStatus::Generating) + if (it_print_object_status != print_object_status.end()) + update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); + model_object.sla_points_status = model_object_new.sla_points_status; + }*/ - bool old_user_modified = model_object.sla_points_status == sla::PointsStatus::UserModified; - bool new_user_modified = model_object_new.sla_points_status == sla::PointsStatus::UserModified; - if ((old_user_modified && ! new_user_modified) || // switching to automatic supports from manual supports - (! old_user_modified && new_user_modified) || // switching to manual supports from automatic supports - (new_user_modified && model_object.sla_support_points != model_object_new.sla_support_points)) { - if (it_print_object_status != print_object_status.end()) - update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); + bool old_user_modified = model_object.sla_points_status == sla::PointsStatus::UserModified; + bool new_user_modified = model_object_new.sla_points_status == sla::PointsStatus::UserModified; + if ((old_user_modified && ! new_user_modified) || // switching to automatic supports from manual supports + (! old_user_modified && new_user_modified) || // switching to manual supports from automatic supports + (new_user_modified && model_object.sla_support_points != model_object_new.sla_support_points)) { + if (it_print_object_status != print_object_status.end()) + update_apply_status(it_print_object_status->print_object->invalidate_step(slaposSupportPoints)); - model_object.sla_points_status = model_object_new.sla_points_status; - model_object.sla_support_points = model_object_new.sla_support_points; - } + model_object.sla_points_status = model_object_new.sla_points_status; + model_object.sla_support_points = model_object_new.sla_support_points; + } - // Copy the ModelObject name, input_file and instances. The instances will compared against PrintObject instances in the next step. - model_object.name = model_object_new.name; - model_object.input_file = model_object_new.input_file; - model_object.clear_instances(); - model_object.instances.reserve(model_object_new.instances.size()); - for (const ModelInstance *model_instance : model_object_new.instances) { - model_object.instances.emplace_back(new ModelInstance(*model_instance)); - model_object.instances.back()->set_model_object(&model_object); - } - } + // Copy the ModelObject name, input_file and instances. The instances will compared against PrintObject instances in the next step. + model_object.name = model_object_new.name; + model_object.input_file = model_object_new.input_file; + model_object.clear_instances(); + model_object.instances.reserve(model_object_new.instances.size()); + for (const ModelInstance *model_instance : model_object_new.instances) { + model_object.instances.emplace_back(new ModelInstance(*model_instance)); + model_object.instances.back()->set_model_object(&model_object); + } + } + } std::vector new_instances = sla_instances(model_object); if (it_print_object_status != print_object_status.end() && it_print_object_status->status != PrintObjectStatus::Deleted) { @@ -544,9 +548,9 @@ sla::SupportConfig make_support_cfg(const SLAPrintObjectConfig& c) { scfg.head_penetration_mm = c.support_head_penetration.getFloat(); scfg.head_width_mm = c.support_head_width.getFloat(); scfg.object_elevation_mm = c.support_object_elevation.getFloat(); - scfg.tilt = c.support_critical_angle.getFloat() * PI / 180.0 ; + scfg.bridge_slope = c.support_critical_angle.getFloat() * PI / 180.0 ; scfg.max_bridge_length_mm = c.support_max_bridge_length.getFloat(); - scfg.headless_pillar_radius_mm = 0.375*c.support_pillar_diameter.getFloat(); + scfg.max_pillar_link_distance_mm = c.support_max_pillar_link_distance.getFloat(); switch(c.support_pillar_connection_mode.getInt()) { case slapcmZigZag: scfg.pillar_connection_mode = sla::PillarConnectionMode::zigzag; break; @@ -567,7 +571,24 @@ void swapXY(ExPolygon& expoly) { for(auto& p : expoly.contour.points) std::swap(p(X), p(Y)); for(auto& h : expoly.holes) for(auto& p : h.points) std::swap(p(X), p(Y)); } +} +std::string SLAPrint::validate() const +{ + for(SLAPrintObject * po : m_objects) { + sla::SupportConfig cfg = make_support_cfg(po->config()); + + double pinhead_width = + 2 * cfg.head_front_radius_mm + + cfg.head_width_mm + + 2 * cfg.head_back_radius_mm - + cfg.head_penetration_mm; + + if(pinhead_width > cfg.object_elevation_mm) + return L("Elevetion is too low for object."); + } + + return ""; } std::vector SLAPrint::calculate_heights(const BoundingBoxf3& bb3d, @@ -673,6 +694,7 @@ void SLAPrint::process() // the density config value is in percents: config.density_relative = float(cfg.support_points_density_relative / 100.f); config.minimal_distance = float(cfg.support_points_minimal_distance); + config.head_diameter = float(cfg.support_head_front_diameter); // Construction of this object does the calculation. this->throw_if_canceled(); @@ -710,54 +732,52 @@ void SLAPrint::process() return; } - try { - sla::SupportConfig scfg = make_support_cfg(po.m_config); - sla::Controller ctl; + sla::SupportConfig scfg = make_support_cfg(po.m_config); + sla::Controller ctl; - // some magic to scale the status values coming from the support - // tree creation into the whole print process - auto stfirst = OBJ_STEP_LEVELS.begin(); - auto stthis = stfirst + slaposSupportTree; - // we need to add up the status portions until this operation - int init = std::accumulate(stfirst, stthis, 0); - init = int(init * ostepd); // scale the init portion + // some magic to scale the status values coming from the support + // tree creation into the whole print process + auto stfirst = OBJ_STEP_LEVELS.begin(); + auto stthis = stfirst + slaposSupportTree; + // we need to add up the status portions until this operation + int init = std::accumulate(stfirst, stthis, 0); + init = int(init * ostepd); // scale the init portion - // scaling for the sub operations - double d = *stthis / (objcount * 100.0); + // scaling for the sub operations + double d = *stthis / (objcount * 100.0); - ctl.statuscb = [this, init, d](unsigned st, const std::string& msg) - { - //FIXME this status line scaling does not seem to be correct. - // How does it account for an increasing object index? - report_status(*this, int(init + st*d), msg); - }; + ctl.statuscb = [this, init, d](unsigned st, const std::string& msg) + { + //FIXME this status line scaling does not seem to be correct. + // How does it account for an increasing object index? + report_status(*this, int(init + st*d), msg); + }; - ctl.stopcondition = [this](){ return canceled(); }; - ctl.cancelfn = [this]() { throw_if_canceled(); }; + ctl.stopcondition = [this](){ return canceled(); }; + ctl.cancelfn = [this]() { throw_if_canceled(); }; - po.m_supportdata->support_tree_ptr.reset( - new SLASupportTree(sla::to_point_set(po.m_supportdata->support_points), - po.m_supportdata->emesh, scfg, ctl)); + po.m_supportdata->support_tree_ptr.reset( + new SLASupportTree(po.m_supportdata->support_points, + po.m_supportdata->emesh, scfg, ctl)); - // Create the unified mesh - auto rc = SlicingStatus::RELOAD_SCENE; + throw_if_canceled(); - // This is to prevent "Done." being displayed during merged_mesh() - report_status(*this, -1, L("Visualizing supports")); - po.m_supportdata->support_tree_ptr->merged_mesh(); + // Create the unified mesh + auto rc = SlicingStatus::RELOAD_SCENE; - BOOST_LOG_TRIVIAL(debug) << "Processed support point count " - << po.m_supportdata->support_points.size(); + // This is to prevent "Done." being displayed during merged_mesh() + report_status(*this, -1, L("Visualizing supports")); + po.m_supportdata->support_tree_ptr->merged_mesh(); - // Check the mesh for later troubleshooting. - if(po.support_mesh().empty()) - BOOST_LOG_TRIVIAL(warning) << "Support mesh is empty"; + BOOST_LOG_TRIVIAL(debug) << "Processed support point count " + << po.m_supportdata->support_points.size(); + + // Check the mesh for later troubleshooting. + if(po.support_mesh().empty()) + BOOST_LOG_TRIVIAL(warning) << "Support mesh is empty"; + + report_status(*this, -1, L("Visualizing supports"), rc); - report_status(*this, -1, L("Visualizing supports"), rc); - } catch(sla::SLASupportsStoppedException&) { - // no need to rethrow - // throw_if_canceled(); - } }; // This step generates the sla base pad @@ -821,7 +841,7 @@ void SLAPrint::process() // We have the layer polygon collection but we need to unite them into // an index where the key is the height level in discrete levels (clipper) - auto index_slices = [ilhd](SLAPrintObject& po) { + auto index_slices = [this, ilhd](SLAPrintObject& po) { po.m_slice_index.clear(); auto sih = LevelID(scale_(ilhd)); @@ -890,6 +910,9 @@ void SLAPrint::process() sr.support_slices_idx = SLAPrintObject::SliceRecord::Idx(i); } } + + // Using RELOAD_SLA_PREVIEW to tell the Plater to pass the update status to the 3D preview to load the SLA slices. + report_status(*this, -2, "", SlicingStatus::RELOAD_SLA_PREVIEW); }; // Rasterizing the model objects, and their supports @@ -1389,6 +1412,7 @@ bool SLAPrintObject::invalidate_state_by_config_options(const std::vector; using SLAPrinterPtr = std::unique_ptr; @@ -247,6 +249,11 @@ private: // Invalidate steps based on a set of parameters changed. bool invalidate_state_by_config_options(const std::vector &opt_keys); + std::vector calculate_heights(const BoundingBoxf3& bb, + float elevation, + float initial_layer_height, + float layer_height) const; + void fill_statistics(); SLAPrintConfig m_print_config; @@ -270,8 +277,6 @@ private: lref(std::cref(lyr)), copies(std::cref(cp)) {} }; - std::vector calculate_heights(const BoundingBoxf3& bb, float elevation, float initial_layer_height, float layer_height) const; - // One level may contain multiple slices from multiple objects and their // supports using LayerRefs = std::vector; diff --git a/src/libslic3r/SupportMaterial.cpp b/src/libslic3r/SupportMaterial.cpp index 8cdc0ebfd..c1847fcd8 100644 --- a/src/libslic3r/SupportMaterial.cpp +++ b/src/libslic3r/SupportMaterial.cpp @@ -2850,7 +2850,7 @@ void modulate_extrusion_by_overlapping_layers( if (end_and_dist2.first == nullptr) { // New fragment connecting to pt_current was not found. // Verify that the last point found is close to the original end point of the unfragmented path. - //const double d2 = (pt_end - pt_current).squaredNorm(); + //const double d2 = (pt_end - pt_current).cast.squaredNorm(); //assert(d2 < coordf_t(search_radius * search_radius)); // End of the path. break; diff --git a/src/libslic3r/Technologies.hpp b/src/libslic3r/Technologies.hpp index e978b5838..307527fcb 100644 --- a/src/libslic3r/Technologies.hpp +++ b/src/libslic3r/Technologies.hpp @@ -20,9 +20,8 @@ // Disable synchronization of unselected instances #define DISABLE_INSTANCES_SYNCH (0 && ENABLE_1_42_0_ALPHA1) -// Scene's GUI made using imgui library -#define ENABLE_IMGUI (1 && ENABLE_1_42_0_ALPHA1) -#define DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI (1 && ENABLE_IMGUI) +// Disable imgui dialog for move, rotate and scale gizmos +#define DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI (1 && ENABLE_1_42_0_ALPHA1) // Use wxDataViewRender instead of wxDataViewCustomRenderer #define ENABLE_NONCUSTOM_DATA_VIEW_RENDERING (0 && ENABLE_1_42_0_ALPHA1) diff --git a/src/libslic3r/TriangleMesh.cpp b/src/libslic3r/TriangleMesh.cpp index f75bd7fa9..eaa11b738 100644 --- a/src/libslic3r/TriangleMesh.cpp +++ b/src/libslic3r/TriangleMesh.cpp @@ -247,7 +247,7 @@ bool TriangleMesh::needed_repair() const || this->stl.stats.backwards_edges > 0; } -void TriangleMesh::WriteOBJFile(char* output_file) +void TriangleMesh::WriteOBJFile(const char* output_file) { stl_generate_shared_vertices(&stl); stl_write_obj(&stl, output_file); @@ -620,8 +620,9 @@ void TriangleMesh::require_shared_vertices() for (int nbr_idx = 0; nbr_idx < 3; ++nbr_idx) { int nbr_face = this->stl.neighbors_start[facet_idx].neighbor[nbr_idx]; if (nbr_face != -1) { - assert(stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 1) % 3] == vertices[(nbr_idx + 1) % 3]); - assert(stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 2) % 3] == vertices[nbr_idx]); + assert( + (stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 1) % 3] == vertices[(nbr_idx + 1) % 3] && stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 2) % 3] == vertices[nbr_idx]) || + (stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 2) % 3] == vertices[(nbr_idx + 1) % 3] && stl.v_indices[nbr_face].vertex[(nbr.which_vertex_not[nbr_idx] + 1) % 3] == vertices[nbr_idx])); } } } @@ -1498,9 +1499,16 @@ void TriangleMeshSlicer::make_loops(std::vector &lines, Polygo // Try to close gaps. // Do it in two rounds, first try to connect in the same direction only, // then try to connect the open polylines in reversed order as well. +#if 0 + for (double max_gap : { EPSILON, 0.001, 0.1, 1., 2. }) { + chain_open_polylines_close_gaps(open_polylines, *loops, max_gap, false); + chain_open_polylines_close_gaps(open_polylines, *loops, max_gap, true); + } +#else const double max_gap = 2.; //mm chain_open_polylines_close_gaps(open_polylines, *loops, max_gap, false); chain_open_polylines_close_gaps(open_polylines, *loops, max_gap, true); +#endif #ifdef SLIC3R_DEBUG_SLICE_PROCESSING { diff --git a/src/libslic3r/TriangleMesh.hpp b/src/libslic3r/TriangleMesh.hpp index 04c13e876..a4387e5c1 100644 --- a/src/libslic3r/TriangleMesh.hpp +++ b/src/libslic3r/TriangleMesh.hpp @@ -36,7 +36,7 @@ public: float volume(); void check_topology(); bool is_manifold() const { return this->stl.stats.connected_facets_3_edge == (int)this->stl.stats.number_of_facets; } - void WriteOBJFile(char* output_file); + void WriteOBJFile(const char* output_file); void scale(float factor); void scale(const Vec3d &versor); void translate(float x, float y, float z); diff --git a/src/slic3r.cpp b/src/slic3r.cpp index 9a124c73c..3b301ec2a 100644 --- a/src/slic3r.cpp +++ b/src/slic3r.cpp @@ -31,22 +31,456 @@ #include "libslic3r/Print.hpp" #include "libslic3r/SLAPrint.hpp" #include "libslic3r/TriangleMesh.hpp" +#include "libslic3r/Format/AMF.hpp" #include "libslic3r/Format/3mf.hpp" +#include "libslic3r/Format/STL.hpp" +#include "libslic3r/Format/OBJ.hpp" #include "libslic3r/Utils.hpp" +#include "slic3r.hpp" #include "slic3r/GUI/GUI.hpp" #include "slic3r/GUI/GUI_App.hpp" using namespace Slic3r; -/// utility function for displaying CLI usage -void printUsage(); +PrinterTechnology get_printer_technology(const DynamicConfig &config) +{ + const ConfigOptionEnum *opt = config.option>("printer_technology"); + return (opt == nullptr) ? ptUnknown : opt->value; +} -#ifdef _MSC_VER -int slic3r_main_(int argc, char **argv) +int CLI::run(int argc, char **argv) +{ + if (! this->setup(argc, argv)) + return 1; + + m_extra_config.apply(m_config, true); + m_extra_config.normalize(); + + bool start_gui = m_actions.empty() && + // cutting transformations are setting an "export" action. + std::find(m_transforms.begin(), m_transforms.end(), "cut") == m_transforms.end() && + std::find(m_transforms.begin(), m_transforms.end(), "cut_x") == m_transforms.end() && + std::find(m_transforms.begin(), m_transforms.end(), "cut_y") == m_transforms.end(); + PrinterTechnology printer_technology = get_printer_technology(m_extra_config); + const std::vector &load_configs = m_config.option("load", true)->values; + + // load config files supplied via --load + for (auto const &file : load_configs) { + if (! boost::filesystem::exists(file)) { + if (m_config.opt_bool("ignore_nonexistent_config")) { + continue; + } else { + boost::nowide::cerr << "No such file: " << file << std::endl; + return 1; + } + } + DynamicPrintConfig config; + try { + config.load(file); + } catch (std::exception &ex) { + boost::nowide::cerr << "Error while reading config file: " << ex.what() << std::endl; + return 1; + } + config.normalize(); + PrinterTechnology other_printer_technology = get_printer_technology(config); + if (printer_technology == ptUnknown) { + printer_technology = other_printer_technology; + } else if (printer_technology != other_printer_technology) { + boost::nowide::cerr << "Mixing configurations for FFF and SLA technologies" << std::endl; + return 1; + } + m_print_config.apply(config); + } + + // Read input file(s) if any. + for (const std::string &file : m_input_files) { + if (! boost::filesystem::exists(file)) { + boost::nowide::cerr << "No such file: " << file << std::endl; + exit(1); + } + Model model; + try { + // When loading an AMF or 3MF, config is imported as well, including the printer technology. + model = Model::read_from_file(file, &m_print_config, true); + PrinterTechnology other_printer_technology = get_printer_technology(m_print_config); + if (printer_technology == ptUnknown) { + printer_technology = other_printer_technology; + } else if (printer_technology != other_printer_technology) { + boost::nowide::cerr << "Mixing configurations for FFF and SLA technologies" << std::endl; + return 1; + } + } catch (std::exception &e) { + boost::nowide::cerr << file << ": " << e.what() << std::endl; + return 1; + } + if (model.objects.empty()) { + boost::nowide::cerr << "Error: file is empty: " << file << std::endl; + continue; + } + m_models.push_back(model); + } + + // Apply command line options to a more specific DynamicPrintConfig which provides normalize() + // (command line options override --load files) + m_print_config.apply(m_extra_config, true); + // Normalizing after importing the 3MFs / AMFs + m_print_config.normalize(); + + if (printer_technology == ptUnknown) + printer_technology = std::find(m_actions.begin(), m_actions.end(), "export_sla") == m_actions.end() ? ptFFF : ptSLA; + + // Initialize full print configs for both the FFF and SLA technologies. + FullPrintConfig fff_print_config; +// SLAFullPrintConfig sla_print_config; + fff_print_config.apply(m_print_config, true); +// sla_print_config.apply(m_print_config, true); + + // Loop through transform options. + for (auto const &opt_key : m_transforms) { + if (opt_key == "merge") { + Model m; + for (auto &model : m_models) + for (ModelObject *o : model.objects) + m.add_object(*o); + // Rearrange instances unless --dont-arrange is supplied + if (! m_config.opt_bool("dont_arrange")) { + m.add_default_instances(); + const BoundingBoxf &bb = fff_print_config.bed_shape.values; + m.arrange_objects( + fff_print_config.min_object_distance(), + // If we are going to use the merged model for printing, honor + // the configured print bed for arranging, otherwise do it freely. + this->has_print_action() ? &bb : nullptr + ); + } + m_models.clear(); + m_models.emplace_back(std::move(m)); + } else if (opt_key == "duplicate") { + const BoundingBoxf &bb = fff_print_config.bed_shape.values; + for (auto &model : m_models) { + const bool all_objects_have_instances = std::none_of( + model.objects.begin(), model.objects.end(), + [](ModelObject* o){ return o->instances.empty(); } + ); + if (all_objects_have_instances) { + // if all input objects have defined position(s) apply duplication to the whole model + model.duplicate(m_config.opt_int("duplicate"), fff_print_config.min_object_distance(), &bb); + } else { + model.add_default_instances(); + model.duplicate_objects(m_config.opt_int("duplicate"), fff_print_config.min_object_distance(), &bb); + } + } + } else if (opt_key == "duplicate_grid") { + std::vector &ints = m_config.option("duplicate_grid")->values; + const int x = ints.size() > 0 ? ints.at(0) : 1; + const int y = ints.size() > 1 ? ints.at(1) : 1; + const double distance = fff_print_config.duplicate_distance.value; + for (auto &model : m_models) + model.duplicate_objects_grid(x, y, (distance > 0) ? distance : 6); // TODO: this is not the right place for setting a default + } else if (opt_key == "center") { + for (auto &model : m_models) { + model.add_default_instances(); + // this affects instances: + model.center_instances_around_point(m_config.option("center")->value); + // this affects volumes: + //FIXME Vojtech: Who knows why the complete model should be aligned with Z as a single rigid body? + //model.align_to_ground(); + BoundingBoxf3 bbox; + for (ModelObject *model_object : model.objects) + // We are interested into the Z span only, therefore it is sufficient to measure the bounding box of the 1st instance only. + bbox.merge(model_object->instance_bounding_box(0, false)); + for (ModelObject *model_object : model.objects) + for (ModelInstance *model_instance : model_object->instances) + model_instance->set_offset(Z, model_instance->get_offset(Z) - bbox.min.z()); + } + } else if (opt_key == "align_xy") { + const Vec2d &p = m_config.option("align_xy")->value; + for (auto &model : m_models) { + BoundingBoxf3 bb = model.bounding_box(); + // this affects volumes: + model.translate(-(bb.min.x() - p.x()), -(bb.min.y() - p.y()), -bb.min.z()); + } + } else if (opt_key == "dont_arrange") { + // do nothing - this option alters other transform options + } else if (opt_key == "rotate") { + for (auto &model : m_models) + for (auto &o : model.objects) + // this affects volumes: + o->rotate(Geometry::deg2rad(m_config.opt_float(opt_key)), Z); + } else if (opt_key == "rotate_x") { + for (auto &model : m_models) + for (auto &o : model.objects) + // this affects volumes: + o->rotate(Geometry::deg2rad(m_config.opt_float(opt_key)), X); + } else if (opt_key == "rotate_y") { + for (auto &model : m_models) + for (auto &o : model.objects) + // this affects volumes: + o->rotate(Geometry::deg2rad(m_config.opt_float(opt_key)), Y); + } else if (opt_key == "scale") { + for (auto &model : m_models) + for (auto &o : model.objects) + // this affects volumes: + o->scale(m_config.get_abs_value(opt_key, 1)); + } else if (opt_key == "scale_to_fit") { + const Vec3d &opt = m_config.opt(opt_key)->value; + if (opt.x() <= 0 || opt.y() <= 0 || opt.z() <= 0) { + boost::nowide::cerr << "--scale-to-fit requires a positive volume" << std::endl; + return 1; + } + for (auto &model : m_models) + for (auto &o : model.objects) + // this affects volumes: + o->scale_to_fit(opt); + } else if (opt_key == "cut" || opt_key == "cut_x" || opt_key == "cut_y") { + std::vector new_models; + for (auto &model : m_models) { + model.repair(); + model.translate(0, 0, -model.bounding_box().min.z()); // align to z = 0 + size_t num_objects = model.objects.size(); + for (size_t i = 0; i < num_objects; ++ i) { + +#if 0 + if (opt_key == "cut_x") { + o->cut(X, m_config.opt_float("cut_x"), &out); + } else if (opt_key == "cut_y") { + o->cut(Y, m_config.opt_float("cut_y"), &out); + } else if (opt_key == "cut") { + o->cut(Z, m_config.opt_float("cut"), &out); + } #else -int main(int argc, char **argv) + model.objects.front()->cut(0, m_config.opt_float("cut"), true, true, true); #endif + model.delete_object(size_t(0)); + } + } + + // TODO: copy less stuff around using pointers + m_models = new_models; + + if (m_actions.empty()) + m_actions.push_back("export_stl"); + } +#if 0 + else if (opt_key == "cut_grid") { + std::vector new_models; + for (auto &model : m_models) { + TriangleMesh mesh = model.mesh(); + mesh.repair(); + + TriangleMeshPtrs meshes = mesh.cut_by_grid(m_config.option("cut_grid")->value); + size_t i = 0; + for (TriangleMesh* m : meshes) { + Model out; + auto o = out.add_object(); + o->add_volume(*m); + o->input_file += "_" + std::to_string(i++); + delete m; + } + } + + // TODO: copy less stuff around using pointers + m_models = new_models; + + if (m_actions.empty()) + m_actions.push_back("export_stl"); + } +#endif + else if (opt_key == "split") { + for (Model &model : m_models) { + size_t num_objects = model.objects.size(); + for (size_t i = 0; i < num_objects; ++ i) { + model.objects.front()->split(nullptr); + model.delete_object(size_t(0)); + } + } + } else if (opt_key == "repair") { + for (auto &model : m_models) + model.repair(); + } else { + boost::nowide::cerr << "error: option not implemented yet: " << opt_key << std::endl; + return 1; + } + } + + // loop through action options + for (auto const &opt_key : m_actions) { + if (opt_key == "help") { + this->print_help(); + } else if (opt_key == "help_fff") { + this->print_help(true, ptFFF); + } else if (opt_key == "help_sla") { + this->print_help(true, ptSLA); + } else if (opt_key == "save") { + //FIXME check for mixing the FFF / SLA parameters. + // or better save fff_print_config vs. sla_print_config + m_print_config.save(m_config.opt_string("save")); + } else if (opt_key == "info") { + // --info works on unrepaired model + for (Model &model : m_models) { + model.add_default_instances(); + model.print_info(); + } + } else if (opt_key == "export_stl") { + for (auto &model : m_models) + model.add_default_instances(); + if (! this->export_models(IO::STL)) + return 1; + } else if (opt_key == "export_obj") { + for (auto &model : m_models) + model.add_default_instances(); + if (! this->export_models(IO::OBJ)) + return 1; + } else if (opt_key == "export_amf") { + if (! this->export_models(IO::AMF)) + return 1; + } else if (opt_key == "export_3mf") { + if (! this->export_models(IO::TMF)) + return 1; + } else if (opt_key == "export_gcode" || opt_key == "export_sla" || opt_key == "slice") { + if (opt_key == "export_gcode" && printer_technology == ptSLA) { + boost::nowide::cerr << "error: cannot export G-code for an FFF configuration" << std::endl; + return 1; + } else if (opt_key == "export_sla" && printer_technology == ptFFF) { + boost::nowide::cerr << "error: cannot export SLA slices for a SLA configuration" << std::endl; + return 1; + } + // Make a copy of the model if the current action is not the last action, as the model may be + // modified by the centering and such. + Model model_copy; + bool make_copy = &opt_key != &m_actions.back(); + for (Model &model_in : m_models) { + if (make_copy) + model_copy = model_in; + Model &model = make_copy ? model_copy : model_in; + // If all objects have defined instances, their relative positions will be + // honored when printing (they will be only centered, unless --dont-arrange + // is supplied); if any object has no instances, it will get a default one + // and all instances will be rearranged (unless --dont-arrange is supplied). + std::string outfile = m_config.opt_string("output"); + Print fff_print; + SLAPrint sla_print; + PrintBase *print = (printer_technology == ptFFF) ? static_cast(&fff_print) : static_cast(&sla_print); + if (! m_config.opt_bool("dont_arrange")) { + //FIXME make the min_object_distance configurable. + model.arrange_objects(fff_print.config().min_object_distance()); + model.center_instances_around_point(m_config.option("center")->value); + } + if (printer_technology == ptFFF) { + for (auto* mo : model.objects) + fff_print.auto_assign_extruders(mo); + } + print->apply(model, m_print_config); + std::string err = print->validate(); + if (! err.empty()) { + boost::nowide::cerr << err << std::endl; + return 1; + } + if (print->empty()) + boost::nowide::cout << "Nothing to print for " << outfile << " . Either the print is empty or no object is fully inside the print volume." << std::endl; + else + try { + std::string outfile_final; + print->process(); + if (printer_technology == ptFFF) { + // The outfile is processed by a PlaceholderParser. + outfile = fff_print.export_gcode(outfile, nullptr); + outfile_final = fff_print.print_statistics().finalize_output_path(outfile); + } else { + outfile = sla_print.output_filepath(outfile); + //FIXME Tamas, please port it to miniz + // sla_print.export_raster(outfile); + outfile_final = sla_print.print_statistics().finalize_output_path(outfile); + } + if (outfile != outfile_final && Slic3r::rename_file(outfile, outfile_final) != 0) { + boost::nowide::cerr << "Renaming file " << outfile << " to " << outfile_final << " failed" << std::endl; + return 1; + } + boost::nowide::cout << "Slicing result exported to " << outfile << std::endl; + } catch (const std::exception &ex) { + boost::nowide::cerr << ex.what() << std::endl; + return 1; + } +/* + print.center = ! m_config.has("center") + && ! m_config.has("align_xy") + && ! m_config.opt_bool("dont_arrange"); + print.set_model(model); + + // start chronometer + typedef std::chrono::high_resolution_clock clock_; + typedef std::chrono::duration > second_; + std::chrono::time_point t0{ clock_::now() }; + + const std::string outfile = this->output_filepath(model, IO::Gcode); + try { + print.export_gcode(outfile); + } catch (std::runtime_error &e) { + boost::nowide::cerr << e.what() << std::endl; + return 1; + } + boost::nowide::cout << "G-code exported to " << outfile << std::endl; + + // output some statistics + double duration { std::chrono::duration_cast(clock_::now() - t0).count() }; + boost::nowide::cout << std::fixed << std::setprecision(0) + << "Done. Process took " << (duration/60) << " minutes and " + << std::setprecision(3) + << std::fmod(duration, 60.0) << " seconds." << std::endl + << std::setprecision(2) + << "Filament required: " << print.total_used_filament() << "mm" + << " (" << print.total_extruded_volume()/1000 << "cm3)" << std::endl; +*/ + } + } else { + boost::nowide::cerr << "error: option not supported yet: " << opt_key << std::endl; + return 1; + } + } + + if (start_gui) { +#if 1 +// #ifdef USE_WX + GUI::GUI_App *gui = new GUI::GUI_App(); +// gui->autosave = m_config.opt_string("autosave"); + GUI::GUI_App::SetInstance(gui); + gui->CallAfter([gui, this, &load_configs] { + if (!gui->initialized()) { + return; + } +#if 0 + // Load the cummulative config over the currently active profiles. + //FIXME if multiple configs are loaded, only the last one will have an effect. + // We need to decide what to do about loading of separate presets (just print preset, just filament preset etc). + // As of now only the full configs are supported here. + if (!m_print_config.empty()) + gui->mainframe->load_config(m_print_config); +#endif + if (! load_configs.empty()) + // Load the last config to give it a name at the UI. The name of the preset may be later + // changed by loading an AMF or 3MF. + //FIXME this is not strictly correct, as one may pass a print/filament/printer profile here instead of a full config. + gui->mainframe->load_config_file(load_configs.back()); + // If loading a 3MF file, the config is loaded from the last one. + if (! m_input_files.empty()) + gui->plater()->load_files(m_input_files, true, true); + if (! m_extra_config.empty()) + gui->mainframe->load_config(m_extra_config); + }); + return wxEntry(argc, argv); +#else + // No GUI support. Just print out a help. + this->print_help(false); + // If started without a parameter, consider it to be OK, otherwise report an error code (no action etc). + return (argc == 0) ? 0 : 1; +#endif + } + + return 0; +} + +bool CLI::setup(int argc, char **argv) { { const char *loglevel = boost::nowide::getenv("SLIC3R_LOGLEVEL"); @@ -58,15 +492,6 @@ int main(int argc, char **argv) } } - // parse all command line options into a DynamicConfig - DynamicPrintAndCLIConfig all_config; - t_config_option_keys input_files; - // if any option is unsupported, print usage and abort immediately - if (! all_config.read_cli(argc, argv, &input_files)) { - printUsage(); - return 0; - } - boost::filesystem::path path_to_binary = boost::filesystem::system_complete(argv[0]); // Path from the Slic3r binary to its resources. @@ -94,207 +519,114 @@ int main(int argc, char **argv) set_var_dir((path_resources / "icons").string()); set_local_dir((path_resources / "localization").string()); - // apply command line options to a more handy CLIConfig - CLIConfig cli_config; -#ifdef __APPLE__ - // Enable the GUI mode by default, to support drag & drop. - cli_config.gui.value = true; -#endif /* __APPLE__ */ + // Parse all command line options into a DynamicConfig. + // If any option is unsupported, print usage and abort immediately. + t_config_option_keys opt_order; + if (! m_config.read_cli(argc, argv, &m_input_files, &opt_order)) { + // Separate error message reported by the CLI parser from the help. + boost::nowide::cerr << std::endl; + this->print_help(); + return false; + } + // Parse actions and transform options. + for (auto const &opt_key : opt_order) { + if (cli_actions_config_def.has(opt_key)) + m_actions.emplace_back(opt_key); + else if (cli_transform_config_def.has(opt_key)) + m_transforms.emplace_back(opt_key); + } - cli_config.apply(all_config, true); - set_data_dir(cli_config.datadir.value); - - // Load the extra config values. - DynamicPrintConfig extra_config; - extra_config.apply(all_config, true); - - // load config files supplied via --load - DynamicPrintConfig print_config; - for (const std::string &file : cli_config.load.values) { - if (! boost::filesystem::exists(file)) { - boost::nowide::cout << "No such file: " << file << std::endl; - exit(1); - } - DynamicPrintConfig c; - try { - c.load(file); - } catch (std::exception &e) { - boost::nowide::cout << "Error while reading config file: " << e.what() << std::endl; - exit(1); - } - c.normalize(); - print_config.apply(c); + { + const ConfigOptionInt *opt_loglevel = m_config.opt("loglevel"); + if (opt_loglevel != 0) + set_logging_level(opt_loglevel->value); } - if ((input_files.empty() || cli_config.gui.value) && ! cli_config.no_gui.value && ! cli_config.help.value && cli_config.save.value.empty()) { -#if 1 - GUI::GUI_App *gui = new GUI::GUI_App(); - GUI::GUI_App::SetInstance(gui); - gui->CallAfter([gui, &input_files, &cli_config, &extra_config, &print_config] { - if (! gui->initialized()) { - return; - } -#if 0 - // Load the cummulative config over the currently active profiles. - //FIXME if multiple configs are loaded, only the last one will have an effect. - // We need to decide what to do about loading of separate presets (just print preset, just filament preset etc). - // As of now only the full configs are supported here. - if (! print_config.empty()) - gui->mainframe->load_config(print_config); -#endif - if (! cli_config.load.values.empty()) - // Load the last config to give it a name at the UI. The name of the preset may be later - // changed by loading an AMF or 3MF. - //FIXME this is not strictly correct, as one may pass a print/filament/printer profile here instead of a full config. - gui->mainframe->load_config_file(cli_config.load.values.back()); - // If loading a 3MF file, the config is loaded from the last one. - gui->plater()->load_files(input_files, true, true); - if (! extra_config.empty()) - gui->mainframe->load_config(extra_config); - }); - return wxEntry(argc, argv); -#else - std::cout << "GUI support has not been built." << "\n"; - return -1; -#endif - } + // Initialize with defaults. + for (const t_optiondef_map *options : { &cli_actions_config_def.options, &cli_transform_config_def.options, &cli_misc_config_def.options }) + for (const std::pair &optdef : *options) + m_config.optptr(optdef.first, true); - // apply command line options to a more specific DynamicPrintConfig which provides normalize() - // (command line options override --load files) - print_config.apply(extra_config, true); - - // write config if requested - if (! cli_config.save.value.empty()) { - print_config.normalize(); - print_config.save(cli_config.save.value); - } + set_data_dir(m_config.opt_string("datadir")); - if (cli_config.help) { - printUsage(); - return 0; - } - - // read input file(s) if any - std::vector models; - for (const t_config_option_key &file : input_files) { - if (! boost::filesystem::exists(file)) { - boost::nowide::cerr << "No such file: " << file << std::endl; - exit(1); - } - Model model; - try { - model = Model::read_from_file(file, &print_config, true); - } catch (std::exception &e) { - boost::nowide::cerr << file << ": " << e.what() << std::endl; - exit(1); - } - if (model.objects.empty()) { - boost::nowide::cerr << "Error: file is empty: " << file << std::endl; - continue; - } - model.add_default_instances(); - // apply command line transform options - for (ModelObject* o : model.objects) { -/* - if (cli_config.scale_to_fit.is_positive_volume()) - o->scale_to_fit(cli_config.scale_to_fit.value); -*/ - // TODO: honor option order? - o->scale(cli_config.scale.value); - o->rotate(Geometry::deg2rad(cli_config.rotate_x.value), X); - o->rotate(Geometry::deg2rad(cli_config.rotate_y.value), Y); - o->rotate(Geometry::deg2rad(cli_config.rotate.value), Z); - } - // TODO: handle --merge - models.push_back(model); - } - - for (Model &model : models) { - if (cli_config.info) { - // --info works on unrepaired model - model.print_info(); - } else if (cli_config.export_3mf) { - std::string outfile = cli_config.output.value; - if (outfile.empty()) outfile = model.objects.front()->input_file; - // Check if the file is already a 3mf. - if(outfile.substr(outfile.find_last_of('.'), outfile.length()) == ".3mf") - outfile = outfile.substr(0, outfile.find_last_of('.')) + "_2" + ".3mf"; - else - // Remove the previous extension and add .3mf extention. - outfile = outfile.substr(0, outfile.find_last_of('.')) + ".3mf"; - store_3mf(outfile.c_str(), &model, nullptr); - boost::nowide::cout << "File file exported to " << outfile << std::endl; - } else if (cli_config.cut > 0) { - model.repair(); - model.translate(0, 0, - model.bounding_box().min(2)); - if (! model.objects.empty()) { - // XXX - // Model out; - // model.objects.front()->cut(cli_config.cut, &out); - // ModelObject &upper = *out.objects[0]; - // ModelObject &lower = *out.objects[1]; - // // Use the input name and trim off the extension. - // std::string outfile = cli_config.output.value; - // if (outfile.empty()) - // outfile = model.objects.front()->input_file; - // outfile = outfile.substr(0, outfile.find_last_of('.')); - // std::cerr << outfile << "\n"; - // if (upper.facets_count() > 0) - // upper.mesh().write_binary((outfile + "_upper.stl").c_str()); - // if (lower.facets_count() > 0) - // lower.mesh().write_binary((outfile + "_lower.stl").c_str()); - } - } else if (cli_config.slice) { - PrinterTechnology printer_technology = print_config.option>("printer_technology", true)->value; - std::string outfile = cli_config.output.value; - Print fff_print; - SLAPrint sla_print; - PrintBase *print = (printer_technology == ptFFF) ? static_cast(&fff_print) : static_cast(&sla_print); - if (! cli_config.dont_arrange) { - //FIXME make the min_object_distance configurable. - model.arrange_objects(fff_print.config().min_object_distance()); - model.center_instances_around_point(cli_config.print_center); - } - if (printer_technology == ptFFF) { - for (auto* mo : model.objects) - fff_print.auto_assign_extruders(mo); - } - print_config.normalize(); - print->apply(model, print_config); - std::string err = print->validate(); - if (err.empty()) { - if (printer_technology == ptFFF) { - // The outfile is processed by a PlaceholderParser. - fff_print.export_gcode(outfile, nullptr); - } else { - assert(printer_technology == ptSLA); - //FIXME add the output here - } - } else - std::cerr << err << "\n"; - } else { - boost::nowide::cerr << "error: command not supported" << std::endl; - return 1; - } - } - - return 0; + return true; } -void printUsage() +void CLI::print_help(bool include_print_options, PrinterTechnology printer_technology) const { - std::cout << "Slic3r " << SLIC3R_VERSION << " is a STL-to-GCODE translator for RepRap 3D printers" << "\n" - << "written by Alessandro Ranellucci - http://slic3r.org/ - https://github.com/slic3r/Slic3r" << "\n" -// << "Git Version " << BUILD_COMMIT << "\n\n" - << "Usage: ./slic3r [ OPTIONS ] [ file.stl ] [ file2.stl ] ..." << "\n"; - // CLI Options - std::cout << "** CLI OPTIONS **\n"; - print_cli_options(boost::nowide::cout); - std::cout << "****\n"; - // Print options - std::cout << "** PRINT OPTIONS **\n"; - print_print_options(boost::nowide::cout); - std::cout << "****\n"; + boost::nowide::cout + << "Slic3r Prusa Edition " << SLIC3R_BUILD << std::endl + << "https://github.com/prusa3d/Slic3r" << std::endl << std::endl + << "Usage: slic3r [ ACTIONS ] [ TRANSFORM ] [ OPTIONS ] [ file.stl ... ]" << std::endl + << std::endl + << "Actions:" << std::endl; + cli_actions_config_def.print_cli_help(boost::nowide::cout, false); + + boost::nowide::cout + << std::endl + << "Transform options:" << std::endl; + cli_transform_config_def.print_cli_help(boost::nowide::cout, false); + + boost::nowide::cout + << std::endl + << "Other options:" << std::endl; + cli_misc_config_def.print_cli_help(boost::nowide::cout, false); + + if (include_print_options) { + boost::nowide::cout << std::endl; + print_config_def.print_cli_help(boost::nowide::cout, true, [printer_technology](const ConfigOptionDef &def) + { return printer_technology == ptAny || def.printer_technology == ptAny || printer_technology == def.printer_technology; }); + } else { + boost::nowide::cout + << std::endl + << "Run --help-fff / --help-sla to see the full listing of print options." << std::endl; + } +} + +bool CLI::export_models(IO::ExportFormat format) +{ + for (Model &model : m_models) { + const std::string path = this->output_filepath(model, format); + bool success = false; + switch (format) { + case IO::AMF: success = Slic3r::store_amf(path.c_str(), &model, nullptr); break; + case IO::OBJ: success = Slic3r::store_obj(path.c_str(), &model); break; + case IO::STL: success = Slic3r::store_stl(path.c_str(), &model, true); break; + case IO::TMF: success = Slic3r::store_3mf(path.c_str(), &model, nullptr); break; + default: assert(false); break; + } + if (success) + std::cout << "File exported to " << path << std::endl; + else { + std::cerr << "File export to " << path << " failed" << std::endl; + return false; + } + } + return true; +} + +std::string CLI::output_filepath(const Model &model, IO::ExportFormat format) const +{ + std::string ext; + switch (format) { + case IO::AMF: ext = ".amf"; break; + case IO::OBJ: ext = ".obj"; break; + case IO::STL: ext = ".stl"; break; + case IO::TMF: ext = ".3mf"; break; + default: assert(false); break; + }; + auto proposed_path = boost::filesystem::path(model.propose_export_file_name_and_path(ext)); + // use --output when available + std::string cmdline_param = m_config.opt_string("output"); + if (! cmdline_param.empty()) { + // if we were supplied a directory, use it and append our automatically generated filename + boost::filesystem::path cmdline_path(cmdline_param); + if (boost::filesystem::is_directory(cmdline_path)) + proposed_path = cmdline_path / proposed_path.filename(); + else + proposed_path = cmdline_path; + } + return proposed_path.string(); } #ifdef _MSC_VER @@ -309,7 +641,12 @@ extern "C" { for (size_t i = 0; i < argc; ++ i) argv_ptrs[i] = const_cast(argv_narrow[i].data()); // Call the UTF8 main. - return slic3r_main_(argc, argv_ptrs.data()); + return CLI().run(argc, argv_ptrs.data()); } } +#else /* _MSC_VER */ +int main(int argc, char **argv) +{ + return CLI().run(argc, argv); +} #endif /* _MSC_VER */ diff --git a/src/slic3r.hpp b/src/slic3r.hpp new file mode 100644 index 000000000..0554580e5 --- /dev/null +++ b/src/slic3r.hpp @@ -0,0 +1,48 @@ +#ifndef SLIC3R_HPP +#define SLIC3R_HPP + +#include "libslic3r/Config.hpp" +#include "libslic3r/Model.hpp" + +namespace Slic3r { + +namespace IO { + enum ExportFormat : int { + AMF, + OBJ, + STL, + // SVG, + TMF, + Gcode + }; +} + +class CLI { +public: + int run(int argc, char **argv); + +private: + DynamicPrintAndCLIConfig m_config; + DynamicPrintConfig m_print_config; + DynamicPrintConfig m_extra_config; + std::vector m_input_files; + std::vector m_actions; + std::vector m_transforms; + std::vector m_models; + + bool setup(int argc, char **argv); + + /// Prints usage of the CLI. + void print_help(bool include_print_options = false, PrinterTechnology printer_technology = ptAny) const; + + /// Exports loaded models to a file of the specified format, according to the options affecting output filename. + bool export_models(IO::ExportFormat format); + + bool has_print_action() const { return m_config.opt_bool("export_gcode") || m_config.opt_bool("export_sla"); } + + std::string output_filepath(const Model &model, IO::ExportFormat format) const; +}; + +} + +#endif diff --git a/src/slic3r/CMakeLists.txt b/src/slic3r/CMakeLists.txt index 157fc9011..219f17082 100644 --- a/src/slic3r/CMakeLists.txt +++ b/src/slic3r/CMakeLists.txt @@ -28,8 +28,20 @@ set(SLIC3R_GUI_SOURCES GUI/GLCanvas3D.cpp GUI/GLCanvas3DManager.hpp GUI/GLCanvas3DManager.cpp - GUI/GLGizmo.hpp - GUI/GLGizmo.cpp + GUI/Gizmos/GLGizmoBase.cpp + GUI/Gizmos/GLGizmoBase.hpp + GUI/Gizmos/GLGizmoMove.cpp + GUI/Gizmos/GLGizmoMove.hpp + GUI/Gizmos/GLGizmoRotate.cpp + GUI/Gizmos/GLGizmoRotate.hpp + GUI/Gizmos/GLGizmoScale.cpp + GUI/Gizmos/GLGizmoScale.hpp + GUI/Gizmos/GLGizmoSlaSupports.cpp + GUI/Gizmos/GLGizmoSlaSupports.hpp + GUI/Gizmos/GLGizmoFlatten.cpp + GUI/Gizmos/GLGizmoFlatten.hpp + GUI/Gizmos/GLGizmoCut.cpp + GUI/Gizmos/GLGizmoCut.hpp GUI/GLTexture.hpp GUI/GLTexture.cpp GUI/GLToolbar.hpp @@ -76,6 +88,8 @@ set(SLIC3R_GUI_SOURCES GUI/2DBed.hpp GUI/3DBed.cpp GUI/3DBed.hpp + GUI/Camera.cpp + GUI/Camera.hpp GUI/wxExtensions.cpp GUI/wxExtensions.hpp GUI/WipeTowerDialog.cpp diff --git a/src/slic3r/GUI/3DScene.cpp b/src/slic3r/GUI/3DScene.cpp index 88815d9a6..deb2bb08d 100644 --- a/src/slic3r/GUI/3DScene.cpp +++ b/src/slic3r/GUI/3DScene.cpp @@ -834,6 +834,8 @@ bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, M ModelInstance::EPrintVolumeState state = ModelInstance::PVS_Inside; bool all_contained = true; + bool contained_min_one = false; + for (GLVolume* volume : this->volumes) { if ((volume == nullptr) || volume->is_modifier || (volume->is_wipe_tower && !volume->shader_outside_printer_detection_enabled) || ((volume->composite_id.volume_id < 0) && !volume->shader_outside_printer_detection_enabled)) @@ -843,6 +845,9 @@ bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, M bool contained = print_volume.contains(bb); all_contained &= contained; + if (contained) + contained_min_one = true; + volume->is_outside = !contained; if ((state == ModelInstance::PVS_Inside) && volume->is_outside) @@ -855,7 +860,7 @@ bool GLVolumeCollection::check_outside_state(const DynamicPrintConfig* config, M if (out_state != nullptr) *out_state = state; - return all_contained; + return /*all_contained*/ contained_min_one; // #ys_FIXME_delete_after_testing } void GLVolumeCollection::reset_outside_state() @@ -2002,9 +2007,9 @@ std::string _3DScene::get_gl_info(bool format_as_html, bool extensions) return s_canvas_mgr.get_gl_info(format_as_html, extensions); } -bool _3DScene::add_canvas(wxGLCanvas* canvas) +bool _3DScene::add_canvas(wxGLCanvas* canvas, GUI::Bed3D& bed, GUI::Camera& camera, GUI::GLToolbar& view_toolbar) { - return s_canvas_mgr.add(canvas); + return s_canvas_mgr.add(canvas, bed, camera, view_toolbar); } bool _3DScene::remove_canvas(wxGLCanvas* canvas) diff --git a/src/slic3r/GUI/3DScene.hpp b/src/slic3r/GUI/3DScene.hpp index 46cb5b870..15ac6a3a1 100644 --- a/src/slic3r/GUI/3DScene.hpp +++ b/src/slic3r/GUI/3DScene.hpp @@ -25,6 +25,11 @@ inline void glAssertRecentCall() { } #endif namespace Slic3r { +namespace GUI { +class Bed3D; +struct Camera; +class GLToolbar; +} // namespace GUI class Print; class PrintObject; @@ -359,7 +364,7 @@ public: void set_volume_rotation(const Vec3d& rotation) { m_volume_transformation.set_rotation(rotation); set_bounding_boxes_as_dirty(); } void set_volume_rotation(Axis axis, double rotation) { m_volume_transformation.set_rotation(axis, rotation); set_bounding_boxes_as_dirty(); } - Vec3d get_volume_scaling_factor() const { return m_volume_transformation.get_scaling_factor(); } + const Vec3d& get_volume_scaling_factor() const { return m_volume_transformation.get_scaling_factor(); } double get_volume_scaling_factor(Axis axis) const { return m_volume_transformation.get_scaling_factor(axis); } void set_volume_scaling_factor(const Vec3d& scaling_factor) { m_volume_transformation.set_scaling_factor(scaling_factor); set_bounding_boxes_as_dirty(); } @@ -563,7 +568,7 @@ class _3DScene public: static std::string get_gl_info(bool format_as_html, bool extensions); - static bool add_canvas(wxGLCanvas* canvas); + static bool add_canvas(wxGLCanvas* canvas, GUI::Bed3D& bed, GUI::Camera& camera, GUI::GLToolbar& view_toolbar); static bool remove_canvas(wxGLCanvas* canvas); static void remove_all_canvases(); diff --git a/src/slic3r/GUI/BackgroundSlicingProcess.hpp b/src/slic3r/GUI/BackgroundSlicingProcess.hpp index a2299e7bf..9ea20163d 100644 --- a/src/slic3r/GUI/BackgroundSlicingProcess.hpp +++ b/src/slic3r/GUI/BackgroundSlicingProcess.hpp @@ -123,7 +123,7 @@ public: // This "finished" flag does not account for the final export of the output file (.gcode or zipped PNGs), // and it does not account for the OctoPrint scheduling. bool finished() const { return m_print->finished(); } - + private: void thread_proc(); void thread_proc_safe(); diff --git a/src/slic3r/GUI/BonjourDialog.cpp b/src/slic3r/GUI/BonjourDialog.cpp index 68e353ebe..ec6b2f0c9 100644 --- a/src/slic3r/GUI/BonjourDialog.cpp +++ b/src/slic3r/GUI/BonjourDialog.cpp @@ -10,8 +10,10 @@ #include #include #include +#include #include "slic3r/GUI/GUI.hpp" +#include "slic3r/GUI/GUI_App.hpp" #include "slic3r/GUI/I18N.hpp" #include "slic3r/Utils/Bonjour.hpp" @@ -49,31 +51,36 @@ struct LifetimeGuard LifetimeGuard(BonjourDialog *dialog) : dialog(dialog) {} }; - -BonjourDialog::BonjourDialog(wxWindow *parent) : - wxDialog(parent, wxID_ANY, _(L("Network lookup"))), - list(new wxListView(this, wxID_ANY, wxDefaultPosition, wxSize(800, 300))), - replies(new ReplySet), - label(new wxStaticText(this, wxID_ANY, "")), - timer(new wxTimer()), - timer_state(0) +BonjourDialog::BonjourDialog(wxWindow *parent, Slic3r::PrinterTechnology tech) + : wxDialog(parent, wxID_ANY, _(L("Network lookup")), wxDefaultPosition, wxDefaultSize, wxRESIZE_BORDER) + , list(new wxListView(this, wxID_ANY)) + , replies(new ReplySet) + , label(new wxStaticText(this, wxID_ANY, "")) + , timer(new wxTimer()) + , timer_state(0) + , tech(tech) { + const int em = GUI::wxGetApp().em_unit(); + list->SetMinSize(wxSize(80 * em, 30 * em)); + wxBoxSizer *vsizer = new wxBoxSizer(wxVERTICAL); - vsizer->Add(label, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, 10); + vsizer->Add(label, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, em); list->SetSingleStyle(wxLC_SINGLE_SEL); list->SetSingleStyle(wxLC_SORT_DESCENDING); - list->AppendColumn(_(L("Address")), wxLIST_FORMAT_LEFT, 50); - list->AppendColumn(_(L("Hostname")), wxLIST_FORMAT_LEFT, 100); - list->AppendColumn(_(L("Service name")), wxLIST_FORMAT_LEFT, 200); - list->AppendColumn(_(L("OctoPrint version")), wxLIST_FORMAT_LEFT, 50); + list->AppendColumn(_(L("Address")), wxLIST_FORMAT_LEFT, 5 * em); + list->AppendColumn(_(L("Hostname")), wxLIST_FORMAT_LEFT, 10 * em); + list->AppendColumn(_(L("Service name")), wxLIST_FORMAT_LEFT, 20 * em); + if (tech == ptFFF) { + list->AppendColumn(_(L("OctoPrint version")), wxLIST_FORMAT_LEFT, 5 * em); + } - vsizer->Add(list, 1, wxEXPAND | wxALL, 10); + vsizer->Add(list, 1, wxEXPAND | wxALL, em); wxBoxSizer *button_sizer = new wxBoxSizer(wxHORIZONTAL); - button_sizer->Add(new wxButton(this, wxID_OK, "OK"), 0, wxALL, 10); - button_sizer->Add(new wxButton(this, wxID_CANCEL, "Cancel"), 0, wxALL, 10); + button_sizer->Add(new wxButton(this, wxID_OK, "OK"), 0, wxALL, em); + button_sizer->Add(new wxButton(this, wxID_CANCEL, "Cancel"), 0, wxALL, em); // ^ Note: The Ok/Cancel labels are translated by wxWidgets vsizer->Add(button_sizer, 0, wxALIGN_CENTER); @@ -110,7 +117,11 @@ bool BonjourDialog::show_and_lookup() // so that both threads can access it safely. auto dguard = std::make_shared(this); + // Note: More can be done here when we support discovery of hosts other than Octoprint and SL1 + Bonjour::TxtKeys txt_keys { "version", "model" }; + bonjour = std::move(Bonjour("octoprint") + .set_txt_keys(std::move(txt_keys)) .set_retries(3) .set_timeout(4) .on_reply([dguard](BonjourReply &&reply) { @@ -157,9 +168,20 @@ void BonjourDialog::on_reply(BonjourReplyEvent &e) return; } + // Filter replies based on selected technology + const auto model = e.reply.txt_data.find("model"); + const bool sl1 = model != e.reply.txt_data.end() && model->second == "SL1"; + if (tech == ptFFF && sl1 || tech == ptSLA && !sl1) { + return; + } + replies->insert(std::move(e.reply)); auto selected = get_selected(); + + wxWindowUpdateLocker freeze_guard(this); + (void)freeze_guard; + list->DeleteAllItems(); // The whole list is recreated so that we benefit from it already being sorted in the set. @@ -168,12 +190,20 @@ void BonjourDialog::on_reply(BonjourReplyEvent &e) auto item = list->InsertItem(0, reply.full_address); list->SetItem(item, 1, reply.hostname); list->SetItem(item, 2, reply.service_name); - list->SetItem(item, 3, reply.version); + + if (tech == ptFFF) { + const auto it = reply.txt_data.find("version"); + if (it != reply.txt_data.end()) { + list->SetItem(item, 3, GUI::from_u8(it->second)); + } + } } - for (int i = 0; i < 4; i++) { - this->list->SetColumnWidth(i, wxLIST_AUTOSIZE); - if (this->list->GetColumnWidth(i) < 100) { this->list->SetColumnWidth(i, 100); } + const int em = GUI::wxGetApp().em_unit(); + + for (int i = 0; i < list->GetColumnCount(); i++) { + list->SetColumnWidth(i, wxLIST_AUTOSIZE); + if (list->GetColumnWidth(i) < 10 * em) { list->SetColumnWidth(i, 10 * em); } } if (!selected.IsEmpty()) { diff --git a/src/slic3r/GUI/BonjourDialog.hpp b/src/slic3r/GUI/BonjourDialog.hpp index e3f53790b..a9a33d522 100644 --- a/src/slic3r/GUI/BonjourDialog.hpp +++ b/src/slic3r/GUI/BonjourDialog.hpp @@ -5,6 +5,8 @@ #include +#include "libslic3r/PrintConfig.hpp" + class wxListView; class wxStaticText; class wxTimer; @@ -21,7 +23,7 @@ class ReplySet; class BonjourDialog: public wxDialog { public: - BonjourDialog(wxWindow *parent); + BonjourDialog(wxWindow *parent, Slic3r::PrinterTechnology); BonjourDialog(BonjourDialog &&) = delete; BonjourDialog(const BonjourDialog &) = delete; BonjourDialog &operator=(BonjourDialog &&) = delete; @@ -37,6 +39,7 @@ private: std::shared_ptr bonjour; std::unique_ptr timer; unsigned timer_state; + Slic3r::PrinterTechnology tech; void on_reply(BonjourReplyEvent &); void on_timer(wxTimerEvent &); diff --git a/src/slic3r/GUI/Camera.cpp b/src/slic3r/GUI/Camera.cpp new file mode 100644 index 000000000..c748efa64 --- /dev/null +++ b/src/slic3r/GUI/Camera.cpp @@ -0,0 +1,62 @@ +#include "libslic3r/libslic3r.h" + +#include "Camera.hpp" + +static const float GIMBALL_LOCK_THETA_MAX = 180.0f; + +namespace Slic3r { +namespace GUI { + +Camera::Camera() + : type(Ortho) + , zoom(1.0f) + , phi(45.0f) +// , distance(0.0f) + , requires_zoom_to_bed(false) + , m_theta(45.0f) + , m_target(Vec3d::Zero()) +{ +} + +std::string Camera::get_type_as_string() const +{ + switch (type) + { + default: + case Unknown: + return "unknown"; +// case Perspective: +// return "perspective"; + case Ortho: + return "ortho"; + }; +} + +void Camera::set_target(const Vec3d& target) +{ + m_target = target; + m_target(0) = clamp(m_scene_box.min(0), m_scene_box.max(0), m_target(0)); + m_target(1) = clamp(m_scene_box.min(1), m_scene_box.max(1), m_target(1)); + m_target(2) = clamp(m_scene_box.min(2), m_scene_box.max(2), m_target(2)); +} + +void Camera::set_theta(float theta, bool apply_limit) +{ + if (apply_limit) + m_theta = clamp(0.0f, GIMBALL_LOCK_THETA_MAX, theta); + else + { + m_theta = fmod(theta, 360.0f); + if (m_theta < 0.0f) + m_theta += 360.0f; + } +} + +void Camera::set_scene_box(const BoundingBoxf3& box) +{ + m_scene_box = box; +} + +} // GUI +} // Slic3r + diff --git a/src/slic3r/GUI/Camera.hpp b/src/slic3r/GUI/Camera.hpp new file mode 100644 index 000000000..d50dc6e4d --- /dev/null +++ b/src/slic3r/GUI/Camera.hpp @@ -0,0 +1,50 @@ +#ifndef slic3r_Camera_hpp_ +#define slic3r_Camera_hpp_ + +#include "libslic3r/BoundingBox.hpp" + +namespace Slic3r { +namespace GUI { + +struct Camera +{ + enum EType : unsigned char + { + Unknown, +// Perspective, + Ortho, + Num_types + }; + + EType type; + float zoom; + float phi; +// float distance; + bool requires_zoom_to_bed; + +private: + Vec3d m_target; + float m_theta; + + BoundingBoxf3 m_scene_box; + +public: + Camera(); + + std::string get_type_as_string() const; + + const Vec3d& get_target() const { return m_target; } + void set_target(const Vec3d& target); + + float get_theta() const { return m_theta; } + void set_theta(float theta, bool apply_limit); + + const BoundingBoxf3& get_scene_box() const { return m_scene_box; } + void set_scene_box(const BoundingBoxf3& box); +}; + +} // GUI +} // Slic3r + +#endif // slic3r_Camera_hpp_ + diff --git a/src/slic3r/GUI/ConfigSnapshotDialog.cpp b/src/slic3r/GUI/ConfigSnapshotDialog.cpp index 422f683b3..205e84f57 100644 --- a/src/slic3r/GUI/ConfigSnapshotDialog.cpp +++ b/src/slic3r/GUI/ConfigSnapshotDialog.cpp @@ -38,7 +38,7 @@ static wxString generate_html_row(const Config::Snapshot &snapshot, bool row_eve text += wxString("") + (snapshot_active ? _(L("Active: ")) : "") + Utils::format_local_date_time(snapshot.time_captured) + ": " + format_reason(snapshot.reason); if (! snapshot.comment.empty()) - text += " (" + snapshot.comment + ")"; + text += " (" + wxString::FromUTF8(snapshot.comment.data()) + ")"; text += "
"; // End of row header. text += _(L("slic3r version")) + ": " + snapshot.slic3r_version_captured.to_string() + "
"; diff --git a/src/slic3r/GUI/Field.cpp b/src/slic3r/GUI/Field.cpp index 7cc533772..217b9380a 100644 --- a/src/slic3r/GUI/Field.cpp +++ b/src/slic3r/GUI/Field.cpp @@ -37,7 +37,9 @@ void Field::PostInitialize() m_Undo_to_sys_btn = new MyButton(m_parent, wxID_ANY, "", wxDefaultPosition,wxDefaultSize, wxBU_EXACTFIT | wxNO_BORDER); if (wxMSW) { m_Undo_btn->SetBackgroundColour(color); + m_Undo_btn->SetBackgroundStyle(wxBG_STYLE_PAINT); m_Undo_to_sys_btn->SetBackgroundColour(color); + m_Undo_to_sys_btn->SetBackgroundStyle(wxBG_STYLE_PAINT); } m_Undo_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent) { on_back_to_initial_value(); })); m_Undo_to_sys_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent) { on_back_to_sys_value(); })); @@ -258,6 +260,12 @@ void TextCtrl::BUILD() { const long style = m_opt.multiline ? wxTE_MULTILINE : wxTE_PROCESS_ENTER/*0*/; auto temp = new wxTextCtrl(m_parent, wxID_ANY, text_value, wxDefaultPosition, size, style); + temp->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + + if (! m_opt.multiline) + // Only disable background refresh for single line input fields, as they are completely painted over by the edit control. + // This does not apply to the multi-line edit field, where the last line and a narrow frame around the text is not cleared. + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); #ifdef __WXOSX__ temp->OSXDisableAllSmartSubstitutions(); #endif // __WXOSX__ @@ -373,6 +381,8 @@ void CheckBox::BUILD() { false; auto temp = new wxCheckBox(m_parent, wxID_ANY, wxString(""), wxDefaultPosition, size); + temp->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); temp->SetValue(check_value); if (m_opt.readonly) temp->Disable(); @@ -430,6 +440,8 @@ void SpinCtrl::BUILD() { auto temp = new wxSpinCtrl(m_parent, wxID_ANY, text_value, wxDefaultPosition, size, 0|wxTE_PROCESS_ENTER, min_val, max_val, default_value); + temp->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); #ifndef __WXOSX__ // #ys_FIXME_KILL_FOCUS @@ -505,6 +517,8 @@ void Choice::BUILD() { } else temp = new wxBitmapComboBox(m_parent, wxID_ANY, wxString(""), wxDefaultPosition, size, 0, nullptr, wxCB_READONLY); + temp->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); // recast as a wxWindow to fit the calling convention window = dynamic_cast(temp); @@ -784,6 +798,7 @@ void ColourPicker::BUILD() } auto temp = new wxColourPickerCtrl(m_parent, wxID_ANY, clr, wxDefaultPosition, size); + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); // // recast as a wxWindow to fit the calling convention window = dynamic_cast(temp); @@ -818,10 +833,21 @@ void PointCtrl::BUILD() x_textctrl = new wxTextCtrl(m_parent, wxID_ANY, X, wxDefaultPosition, field_size, wxTE_PROCESS_ENTER); y_textctrl = new wxTextCtrl(m_parent, wxID_ANY, Y, wxDefaultPosition, field_size, wxTE_PROCESS_ENTER); + x_textctrl->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + x_textctrl->SetBackgroundStyle(wxBG_STYLE_PAINT); + y_textctrl->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + y_textctrl->SetBackgroundStyle(wxBG_STYLE_PAINT); - temp->Add(new wxStaticText(m_parent, wxID_ANY, "x : "), 0, wxALIGN_CENTER_VERTICAL, 0); + auto static_text_x = new wxStaticText(m_parent, wxID_ANY, "x : "); + auto static_text_y = new wxStaticText(m_parent, wxID_ANY, " y : "); + static_text_x->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + static_text_x->SetBackgroundStyle(wxBG_STYLE_PAINT); + static_text_y->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + static_text_y->SetBackgroundStyle(wxBG_STYLE_PAINT); + + temp->Add(static_text_x, 0, wxALIGN_CENTER_VERTICAL, 0); temp->Add(x_textctrl); - temp->Add(new wxStaticText(m_parent, wxID_ANY, " y : "), 0, wxALIGN_CENTER_VERTICAL, 0); + temp->Add(static_text_y, 0, wxALIGN_CENTER_VERTICAL, 0); temp->Add(y_textctrl); // x_textctrl->Bind(wxEVT_TEXT, ([this](wxCommandEvent e) { on_change_field(); }), x_textctrl->GetId()); @@ -890,6 +916,8 @@ void StaticText::BUILD() const wxString legend(static_cast(m_opt.default_value)->value); auto temp = new wxStaticText(m_parent, wxID_ANY, legend, wxDefaultPosition, size, wxST_ELLIPSIZE_MIDDLE); + temp->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + temp->SetBackgroundStyle(wxBG_STYLE_PAINT); temp->SetFont(wxGetApp().bold_font()); // // recast as a wxWindow to fit the calling convention @@ -913,10 +941,14 @@ void SliderCtrl::BUILD() m_slider = new wxSlider(m_parent, wxID_ANY, def_val * m_scale, min * m_scale, max * m_scale, wxDefaultPosition, size); + m_slider->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + m_slider->SetBackgroundStyle(wxBG_STYLE_PAINT); wxSize field_size(40, -1); m_textctrl = new wxTextCtrl(m_parent, wxID_ANY, wxString::Format("%d", m_slider->GetValue()/m_scale), wxDefaultPosition, field_size); + m_textctrl->SetFont(Slic3r::GUI::wxGetApp().normal_font()); + m_textctrl->SetBackgroundStyle(wxBG_STYLE_PAINT); temp->Add(m_slider, 1, wxEXPAND | wxALIGN_CENTER_VERTICAL, 0); temp->Add(m_textctrl, 0, wxALIGN_CENTER_VERTICAL, 0); diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 8415e8c24..f38e257ac 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -1,4 +1,4 @@ -#include "slic3r/GUI/GLGizmo.hpp" +#include "slic3r/GUI/Gizmos/GLGizmos.hpp" #include "GLCanvas3D.hpp" #include "admesh/stl.h" @@ -16,7 +16,6 @@ #include "slic3r/GUI/GLShader.hpp" #include "slic3r/GUI/GUI.hpp" #include "slic3r/GUI/PresetBundle.hpp" -//#include "slic3r/GUI/GLGizmo.hpp" #include "GUI_App.hpp" #include "GUI_ObjectList.hpp" #include "GUI_ObjectManipulation.hpp" @@ -54,7 +53,6 @@ #include static const float TRACKBALLSIZE = 0.8f; -static const float GIMBALL_LOCK_THETA_MAX = 180.0f; static const float GROUND_Z = -0.02f; // phi / theta angles to orient the camera. @@ -79,7 +77,7 @@ static const float DEFAULT_BG_LIGHT_COLOR[3] = { 0.753f, 0.753f, 0.753f }; static const float ERROR_BG_DARK_COLOR[3] = { 0.478f, 0.192f, 0.039f }; static const float ERROR_BG_LIGHT_COLOR[3] = { 0.753f, 0.192f, 0.039f }; static const float UNIFORM_SCALE_COLOR[3] = { 1.0f, 0.38f, 0.0f }; -static const float AXES_COLOR[3][3] = { { 1.0f, 0.0f, 0.0f }, { 0.0f, 1.0f, 0.0f }, { 0.0f, 0.0f, 1.0f } }; +//static const float AXES_COLOR[3][3] = { { 1.0f, 0.0f, 0.0f }, { 0.0f, 1.0f, 0.0f }, { 0.0f, 0.0f, 1.0f } }; namespace Slic3r { namespace GUI { @@ -183,61 +181,6 @@ void Rect::set_bottom(float bottom) m_bottom = bottom; } -GLCanvas3D::Camera::Camera() - : type(Ortho) - , zoom(1.0f) - , phi(45.0f) -// , distance(0.0f) - , m_theta(45.0f) - , m_target(Vec3d::Zero()) -{ -} - -std::string GLCanvas3D::Camera::get_type_as_string() const -{ - switch (type) - { - default: - case Unknown: - return "unknown"; -// case Perspective: -// return "perspective"; - case Ortho: - return "ortho"; - }; -} - -void GLCanvas3D::Camera::set_theta(float theta, bool apply_limit) -{ - if (apply_limit) - m_theta = clamp(0.0f, GIMBALL_LOCK_THETA_MAX, theta); - else - { - m_theta = fmod(theta, 360.0f); - if (m_theta < 0.0f) - m_theta += 360.0f; - } -} - -void GLCanvas3D::Camera::set_target(const Vec3d& target, GLCanvas3D& canvas) -{ - m_target = target; - m_target(0) = clamp(m_scene_box.min(0), m_scene_box.max(0), m_target(0)); - m_target(1) = clamp(m_scene_box.min(1), m_scene_box.max(1), m_target(1)); - m_target(2) = clamp(m_scene_box.min(2), m_scene_box.max(2), m_target(2)); - if (!m_target.isApprox(target)) - canvas.viewport_changed(); -} - -void GLCanvas3D::Camera::set_scene_box(const BoundingBoxf3& box, GLCanvas3D& canvas) -{ - if (m_scene_box != box) - { - m_scene_box = box; - canvas.viewport_changed(); - } -} - #if !ENABLE_TEXTURES_FROM_SVG GLCanvas3D::Shader::Shader() : m_shader(nullptr) @@ -1145,8 +1088,11 @@ bool GLCanvas3D::Selection::is_single_full_instance() const for (unsigned int i : m_list) { const GLVolume* v = (*m_volumes)[i]; + if ((object_idx != v->object_idx()) || (instance_idx != v->instance_idx())) + return false; + int volume_idx = v->volume_idx(); - if ((v->object_idx() == object_idx) && (v->instance_idx() == instance_idx) && (volume_idx >= 0)) + if (volume_idx >= 0) volumes_idxs.insert(volume_idx); } @@ -1275,69 +1221,89 @@ void GLCanvas3D::Selection::rotate(const Vec3d& rotation, GLCanvas3D::Transforma // Only relative rotation values are allowed in the world coordinate system. assert(! transformation_type.world() || transformation_type.relative()); - int rot_axis_max; - //FIXME this does not work for absolute rotations (transformation_type.absolute() is true) - rotation.cwiseAbs().maxCoeff(&rot_axis_max); - - // For generic rotation, we want to rotate the first volume in selection, and then to synchronize the other volumes with it. - std::vector object_instance_first(m_model->objects.size(), -1); - auto rotate_instance = [this, &rotation, &object_instance_first, rot_axis_max, transformation_type](GLVolume &volume, int i) { - int first_volume_idx = object_instance_first[volume.object_idx()]; - if (rot_axis_max != 2 && first_volume_idx != -1) { - // Generic rotation, but no rotation around the Z axis. - // Always do a local rotation (do not consider the selection to be a rigid body). - assert(is_approx(rotation.z(), 0.0)); - const GLVolume &first_volume = *(*m_volumes)[first_volume_idx]; - const Vec3d &rotation = first_volume.get_instance_rotation(); - double z_diff = rotation_diff_z(m_cache.volumes_data[first_volume_idx].get_instance_rotation(), m_cache.volumes_data[i].get_instance_rotation()); - volume.set_instance_rotation(Vec3d(rotation(0), rotation(1), rotation(2) + z_diff)); - } else { - // extracts rotations from the composed transformation - Vec3d new_rotation = transformation_type.world() ? - Geometry::extract_euler_angles(Geometry::assemble_transform(Vec3d::Zero(), rotation) * m_cache.volumes_data[i].get_instance_rotation_matrix()) : - transformation_type.absolute() ? rotation : rotation + m_cache.volumes_data[i].get_instance_rotation(); - if (rot_axis_max == 2 && transformation_type.joint()) { - // Only allow rotation of multiple instances as a single rigid body when rotating around the Z axis. - double z_diff = rotation_diff_z(new_rotation, m_cache.volumes_data[i].get_instance_rotation()); - volume.set_instance_offset(m_cache.dragging_center + Eigen::AngleAxisd(z_diff, Vec3d::UnitZ()) * (m_cache.volumes_data[i].get_instance_position() - m_cache.dragging_center)); - } - volume.set_instance_rotation(new_rotation); - object_instance_first[volume.object_idx()] = i; - } - }; - - for (unsigned int i : m_list) + int rot_axis_max = 0; + if (rotation.isApprox(Vec3d::Zero())) { - GLVolume &volume = *(*m_volumes)[i]; - if (is_single_full_instance()) - rotate_instance(volume, i); - else if (is_single_volume() || is_single_modifier()) - { - if (transformation_type.independent()) - volume.set_volume_rotation(volume.get_volume_rotation() + rotation); - else - { - Transform3d m = Geometry::assemble_transform(Vec3d::Zero(), rotation); - Vec3d new_rotation = Geometry::extract_euler_angles(m * m_cache.volumes_data[i].get_volume_rotation_matrix()); - volume.set_volume_rotation(new_rotation); - } - } - else + for (unsigned int i : m_list) { + GLVolume &volume = *(*m_volumes)[i]; if (m_mode == Instance) - rotate_instance(volume, i); + { + volume.set_instance_rotation(m_cache.volumes_data[i].get_instance_rotation()); + volume.set_instance_offset(m_cache.volumes_data[i].get_instance_position()); + } else if (m_mode == Volume) { + volume.set_volume_rotation(m_cache.volumes_data[i].get_volume_rotation()); + volume.set_volume_offset(m_cache.volumes_data[i].get_volume_position()); + } + } + } + else + { + //FIXME this does not work for absolute rotations (transformation_type.absolute() is true) + rotation.cwiseAbs().maxCoeff(&rot_axis_max); + + // For generic rotation, we want to rotate the first volume in selection, and then to synchronize the other volumes with it. + std::vector object_instance_first(m_model->objects.size(), -1); + auto rotate_instance = [this, &rotation, &object_instance_first, rot_axis_max, transformation_type](GLVolume &volume, int i) { + int first_volume_idx = object_instance_first[volume.object_idx()]; + if (rot_axis_max != 2 && first_volume_idx != -1) { + // Generic rotation, but no rotation around the Z axis. + // Always do a local rotation (do not consider the selection to be a rigid body). + assert(is_approx(rotation.z(), 0.0)); + const GLVolume &first_volume = *(*m_volumes)[first_volume_idx]; + const Vec3d &rotation = first_volume.get_instance_rotation(); + double z_diff = rotation_diff_z(m_cache.volumes_data[first_volume_idx].get_instance_rotation(), m_cache.volumes_data[i].get_instance_rotation()); + volume.set_instance_rotation(Vec3d(rotation(0), rotation(1), rotation(2) + z_diff)); + } else { // extracts rotations from the composed transformation - Transform3d m = Geometry::assemble_transform(Vec3d::Zero(), rotation); - Vec3d new_rotation = Geometry::extract_euler_angles(m * m_cache.volumes_data[i].get_volume_rotation_matrix()); - if (transformation_type.joint()) - { - Vec3d local_pivot = m_cache.volumes_data[i].get_instance_full_matrix().inverse() * m_cache.dragging_center; - Vec3d offset = m * (m_cache.volumes_data[i].get_volume_position() - local_pivot); - volume.set_volume_offset(local_pivot + offset); + Vec3d new_rotation = transformation_type.world() ? + Geometry::extract_euler_angles(Geometry::assemble_transform(Vec3d::Zero(), rotation) * m_cache.volumes_data[i].get_instance_rotation_matrix()) : + transformation_type.absolute() ? rotation : rotation + m_cache.volumes_data[i].get_instance_rotation(); + if (rot_axis_max == 2 && transformation_type.joint()) { + // Only allow rotation of multiple instances as a single rigid body when rotating around the Z axis. + Vec3d offset = Geometry::assemble_transform(Vec3d::Zero(), Vec3d(0.0, 0.0, new_rotation(2) - m_cache.volumes_data[i].get_instance_rotation()(2))) * (m_cache.volumes_data[i].get_instance_position() - m_cache.dragging_center); + volume.set_instance_offset(m_cache.dragging_center + offset); + } + volume.set_instance_rotation(new_rotation); + object_instance_first[volume.object_idx()] = i; + } + }; + + for (unsigned int i : m_list) + { + GLVolume &volume = *(*m_volumes)[i]; + if (is_single_full_instance()) + rotate_instance(volume, i); + else if (is_single_volume() || is_single_modifier()) + { + if (transformation_type.independent()) + volume.set_volume_rotation(volume.get_volume_rotation() + rotation); + else + { + Transform3d m = Geometry::assemble_transform(Vec3d::Zero(), rotation); + Vec3d new_rotation = Geometry::extract_euler_angles(m * m_cache.volumes_data[i].get_volume_rotation_matrix()); + volume.set_volume_rotation(new_rotation); + } + } + else + { + if (m_mode == Instance) + rotate_instance(volume, i); + else if (m_mode == Volume) + { + // extracts rotations from the composed transformation + Transform3d m = Geometry::assemble_transform(Vec3d::Zero(), rotation); + Vec3d new_rotation = Geometry::extract_euler_angles(m * m_cache.volumes_data[i].get_volume_rotation_matrix()); + if (transformation_type.joint()) + { + Vec3d local_pivot = m_cache.volumes_data[i].get_instance_full_matrix().inverse() * m_cache.dragging_center; + Vec3d offset = m * (m_cache.volumes_data[i].get_volume_position() - local_pivot); + volume.set_volume_offset(local_pivot + offset); + } + volume.set_volume_rotation(new_rotation); } - volume.set_volume_rotation(new_rotation); } } } @@ -3039,14 +3005,6 @@ void GLCanvas3D::Gizmos::render_overlay(const GLCanvas3D& canvas, const GLCanvas ::glPopMatrix(); } -#if !ENABLE_IMGUI -void GLCanvas3D::Gizmos::create_external_gizmo_widgets(wxWindow *parent) -{ - for (auto &entry : m_gizmos) { - entry.second->create_external_gizmo_widgets(parent); - } -} -#endif // not ENABLE_IMGUI void GLCanvas3D::Gizmos::reset() { @@ -3065,13 +3023,12 @@ void GLCanvas3D::Gizmos::do_render_overlay(const GLCanvas3D& canvas, const GLCan return; float cnv_w = (float)canvas.get_canvas_size().get_width(); -#if ENABLE_IMGUI float cnv_h = (float)canvas.get_canvas_size().get_height(); -#endif // ENABLE_IMGUI float zoom = canvas.get_camera_zoom(); float inv_zoom = (zoom != 0.0f) ? 1.0f / zoom : 0.0f; float height = get_total_overlay_height(); + float width = get_total_overlay_width(); #if ENABLE_SVG_ICONS float scaled_border = m_overlay_border * m_overlay_scale * inv_zoom; #else @@ -3083,7 +3040,7 @@ void GLCanvas3D::Gizmos::do_render_overlay(const GLCanvas3D& canvas, const GLCan float left = top_x; float top = top_y; - float right = left + get_total_overlay_width() * inv_zoom; + float right = left + width * inv_zoom; float bottom = top - height * inv_zoom; // renders background @@ -3191,29 +3148,27 @@ void GLCanvas3D::Gizmos::do_render_overlay(const GLCanvas3D& canvas, const GLCan #if ENABLE_SVG_ICONS float u_icon_size = m_overlay_icons_size * m_overlay_scale * inv_tex_width; float v_icon_size = m_overlay_icons_size * m_overlay_scale * inv_tex_height; - float top = sprite_id * v_icon_size; - float left = state * u_icon_size; - float bottom = top + v_icon_size; - float right = left + u_icon_size; + float v_top = sprite_id * v_icon_size; + float u_left = state * u_icon_size; + float v_bottom = v_top + v_icon_size; + float u_right = u_left + u_icon_size; #else float uv_icon_size = (float)m_icons_texture.metadata.icon_size * inv_texture_size; - float top = sprite_id * uv_icon_size; - float left = state * uv_icon_size; - float bottom = top + uv_icon_size; - float right = left + uv_icon_size; + float v_top = sprite_id * uv_icon_size; + float u_left = state * uv_icon_size; + float v_bottom = v_top + uv_icon_size; + float u_right = u_left + uv_icon_size; #endif // ENABLE_SVG_ICONS - GLTexture::render_sub_texture(icons_texture_id, top_x, top_x + scaled_icons_size, top_y - scaled_icons_size, top_y, { { left, bottom }, { right, bottom }, { right, top }, { left, top } }); -#if ENABLE_IMGUI + GLTexture::render_sub_texture(icons_texture_id, top_x, top_x + scaled_icons_size, top_y - scaled_icons_size, top_y, { { u_left, v_bottom }, { u_right, v_bottom }, { u_right, v_top }, { u_left, v_top } }); if (it->second->get_state() == GLGizmoBase::On) { - float toolbar_top = (float)cnv_h - canvas.m_view_toolbar->get_height(); + float toolbar_top = (float)cnv_h - canvas.m_view_toolbar.get_height(); #if ENABLE_SVG_ICONS - it->second->render_input_window(2.0f * m_overlay_border + m_overlay_icons_size, 0.5f * cnv_h - top_y * zoom, toolbar_top, selection); + it->second->render_input_window(width, 0.5f * cnv_h - top_y * zoom, toolbar_top, selection); #else it->second->render_input_window(2.0f * m_overlay_border + icon_size * zoom, 0.5f * cnv_h - top_y * zoom, toolbar_top, selection); #endif // ENABLE_SVG_ICONS } -#endif // ENABLE_IMGUI #if ENABLE_SVG_ICONS top_y -= scaled_stride_y; #else @@ -3305,7 +3260,7 @@ bool GLCanvas3D::Gizmos::generate_icons_texture() const } #endif // ENABLE_SVG_ICONS -const unsigned char GLCanvas3D::WarningTexture::Background_Color[3] = { 9, 91, 134 }; +const unsigned char GLCanvas3D::WarningTexture::Background_Color[3] = { 120, 120, 120 };//{ 9, 91, 134 }; const unsigned char GLCanvas3D::WarningTexture::Opacity = 255; GLCanvas3D::WarningTexture::WarningTexture() @@ -3339,16 +3294,23 @@ void GLCanvas3D::WarningTexture::activate(WarningTexture::Warning warning, bool // Look at the end of our vector and generate proper texture. std::string text; + bool red_colored = false; switch (m_warnings.back()) { case ObjectOutside : text = L("Detected object outside print volume"); break; case ToolpathOutside : text = L("Detected toolpath outside print volume"); break; case SomethingNotShown : text = L("Some objects are not visible when editing supports"); break; + case ObjectClashed: { + text = L("Detected object outside print volume\n" + "Resolve a clash to continue slicing/export process correctly"); + red_colored = true; + break; + } } - _generate(text, canvas); // GUI::GLTexture::reset() is called at the beginning of generate(...) + _generate(text, canvas, red_colored); // GUI::GLTexture::reset() is called at the beginning of generate(...) } -bool GLCanvas3D::WarningTexture::_generate(const std::string& msg, const GLCanvas3D& canvas) +bool GLCanvas3D::WarningTexture::_generate(const std::string& msg, const GLCanvas3D& canvas, const bool red_colored/* = false*/) { reset(); @@ -3365,7 +3327,8 @@ bool GLCanvas3D::WarningTexture::_generate(const std::string& msg, const GLCanva // calculates texture size wxCoord w, h; - memDC.GetTextExtent(msg, &w, &h); +// memDC.GetTextExtent(msg, &w, &h); + memDC.GetMultiLineTextExtent(msg, &w, &h); int pow_of_two_size = next_highest_power_of_2(std::max(w, h)); @@ -3382,8 +3345,9 @@ bool GLCanvas3D::WarningTexture::_generate(const std::string& msg, const GLCanva memDC.Clear(); // draw message - memDC.SetTextForeground(*wxWHITE); - memDC.DrawText(msg, 0, 0); + memDC.SetTextForeground(red_colored ? wxColour(255,72,65/*204,204*/) : *wxWHITE); +// memDC.DrawText(msg, 0, 0); + memDC.DrawLabel(msg, wxRect(0,0, m_original_width, m_original_height), wxALIGN_CENTER); memDC.SelectObject(wxNullBitmap); @@ -3710,7 +3674,6 @@ void GLCanvas3D::LegendTexture::render(const GLCanvas3D& canvas) const wxDEFINE_EVENT(EVT_GLCANVAS_INIT, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_OBJECT_SELECT, SimpleEvent); -wxDEFINE_EVENT(EVT_GLCANVAS_VIEWPORT_CHANGED, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_RIGHT_CLICK, Vec2dEvent); wxDEFINE_EVENT(EVT_GLCANVAS_REMOVE_OBJECT, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_ARRANGE, SimpleEvent); @@ -3727,20 +3690,21 @@ wxDEFINE_EVENT(EVT_GLCANVAS_MOUSE_DRAGGING_FINISHED, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_UPDATE_BED_SHAPE, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_TAB, SimpleEvent); -GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas) +GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar) : m_canvas(canvas) , m_context(nullptr) #if ENABLE_RETINA_GL , m_retina_helper(nullptr) #endif , m_in_render(false) - , m_bed(nullptr) + , m_bed(bed) + , m_camera(camera) + , m_view_toolbar(view_toolbar) #if ENABLE_SVG_ICONS , m_toolbar(GLToolbar::Normal, "Top") #else , m_toolbar(GLToolbar::Normal) #endif // ENABLE_SVG_ICONS - , m_view_toolbar(nullptr) , m_use_clipping_planes(false) , m_sidebar_field("") , m_config(nullptr) @@ -3749,7 +3713,6 @@ GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas) , m_dirty(true) , m_initialized(false) , m_use_VBOs(false) - , m_requires_zoom_to_bed(false) , m_apply_zoom_to_volumes_filter(false) , m_hover_volume_id(-1) , m_toolbar_action_running(false) @@ -3764,9 +3727,6 @@ GLCanvas3D::GLCanvas3D(wxGLCanvas* canvas) , m_color_by("volume") , m_reload_delayed(false) , m_render_sla_auxiliaries(true) -#if !ENABLE_IMGUI - , m_external_gizmo_widgets_parent(nullptr) -#endif // not ENABLE_IMGUI { if (m_canvas != nullptr) { m_timer.SetOwner(m_canvas); @@ -3789,11 +3749,6 @@ void GLCanvas3D::post_event(wxEvent &&event) wxPostEvent(m_canvas, event); } -void GLCanvas3D::viewport_changed() -{ - post_event(SimpleEvent(EVT_GLCANVAS_VIEWPORT_CHANGED)); -} - bool GLCanvas3D::init(bool useVBOs, bool use_legacy_opengl) { if (m_initialized) @@ -3864,13 +3819,6 @@ bool GLCanvas3D::init(bool useVBOs, bool use_legacy_opengl) std::cout << "Unable to initialize gizmos: please, check that all the required textures are available" << std::endl; return false; } - -#if !ENABLE_IMGUI - if (m_external_gizmo_widgets_parent != nullptr) { - m_gizmos.create_external_gizmo_widgets(m_external_gizmo_widgets_parent); - m_canvas->GetParent()->Layout(); - } -#endif // not ENABLE_IMGUI } if (!_init_toolbar()) @@ -3968,9 +3916,8 @@ void GLCanvas3D::set_model(Model* model) void GLCanvas3D::bed_shape_changed() { - m_camera.set_scene_box(scene_bounding_box(), *this); - m_requires_zoom_to_bed = true; - + m_camera.set_scene_box(scene_bounding_box()); + m_camera.requires_zoom_to_bed = true; m_dirty = true; } @@ -3998,8 +3945,7 @@ BoundingBoxf3 GLCanvas3D::volumes_bounding_box() const BoundingBoxf3 GLCanvas3D::scene_bounding_box() const { BoundingBoxf3 bb = volumes_bounding_box(); - if (m_bed != nullptr) - bb.merge(m_bed->get_bounding_box()); + bb.merge(m_bed.get_bounding_box()); if (m_config != nullptr) { @@ -4088,8 +4034,7 @@ bool GLCanvas3D::is_toolbar_item_pressed(const std::string& name) const void GLCanvas3D::zoom_to_bed() { - if (m_bed != nullptr) - _zoom_to_bounding_box(m_bed->get_bounding_box()); + _zoom_to_bounding_box(m_bed.get_bounding_box()); } void GLCanvas3D::zoom_to_volumes() @@ -4128,24 +4073,11 @@ void GLCanvas3D::select_view(const std::string& direction) { m_camera.phi = dir_vec[0]; m_camera.set_theta(dir_vec[1], false); - - viewport_changed(); - if (m_canvas != nullptr) m_canvas->Refresh(); } } -void GLCanvas3D::set_viewport_from_scene(const GLCanvas3D& other) -{ - m_camera.phi = other.m_camera.phi; - m_camera.set_theta(other.m_camera.get_theta(), false); - m_camera.set_scene_box(other.m_camera.get_scene_box(), *this); - m_camera.set_target(other.m_camera.get_target(), *this); - m_camera.zoom = other.m_camera.zoom; - m_dirty = true; -} - void GLCanvas3D::update_volumes_colors_by_extruder() { if (m_config != nullptr) @@ -4161,27 +4093,6 @@ void GLCanvas3D::update_toolbar_items_visibility() m_dirty = true; } -// Returns a Rect object denoting size and position of the Reset button used by a gizmo. -// Returns in either screen or viewport coords. -#if !ENABLE_IMGUI -Rect GLCanvas3D::get_gizmo_reset_rect(const GLCanvas3D& canvas, bool viewport) const -{ - const Size& cnv_size = canvas.get_canvas_size(); - float w = (viewport ? -0.5f : 0.f) * (float)cnv_size.get_width(); - float h = (viewport ? 0.5f : 1.f) * (float)cnv_size.get_height(); - float zoom = canvas.get_camera_zoom(); - float inv_zoom = viewport ? ((zoom != 0.0f) ? 1.0f / zoom : 0.0f) : 1.f; - const float gap = 30.f; - return Rect((w + gap + 80.f) * inv_zoom, (viewport ? -1.f : 1.f) * (h - GIZMO_RESET_BUTTON_HEIGHT) * inv_zoom, - (w + gap + 80.f + GIZMO_RESET_BUTTON_WIDTH) * inv_zoom, (viewport ? -1.f : 1.f) * (h * inv_zoom)); -} - -bool GLCanvas3D::gizmo_reset_rect_contains(const GLCanvas3D& canvas, float x, float y) const -{ - const Rect& rect = get_gizmo_reset_rect(canvas, false); - return (rect.get_left() <= x) && (x <= rect.get_right()) && (rect.get_top() <= y) && (y <= rect.get_bottom()); -} -#endif // not ENABLE_IMGUI void GLCanvas3D::render() { @@ -4193,25 +4104,29 @@ void GLCanvas3D::render() if (m_canvas == nullptr) return; +#ifndef __WXMAC__ + // on Mac this check causes flickering when changing view if (!_is_shown_on_screen()) return; +#endif // __WXMAC__ // ensures this canvas is current and initialized if (!_set_current() || !_3DScene::init(m_canvas)) return; - if ((m_bed != nullptr) && m_bed->get_shape().empty()) + if (m_bed.get_shape().empty()) { // this happens at startup when no data is still saved under <>\AppData\Roaming\Slic3rPE post_event(SimpleEvent(EVT_GLCANVAS_UPDATE_BED_SHAPE)); + return; } - if (m_requires_zoom_to_bed) + if (m_camera.requires_zoom_to_bed) { zoom_to_bed(); const Size& cnv_size = get_canvas_size(); _resize((unsigned int)cnv_size.get_width(), (unsigned int)cnv_size.get_height()); - m_requires_zoom_to_bed = false; + m_camera.requires_zoom_to_bed = false; } _camera_tranform(); @@ -4226,11 +4141,7 @@ void GLCanvas3D::render() // absolute value of the rotation theta = 360.f - theta; - bool is_custom_bed = (m_bed == nullptr) || m_bed->is_custom(); - -#if ENABLE_IMGUI wxGetApp().imgui()->new_frame(); -#endif // ENABLE_IMGUI // picking pass _picking_pass(); @@ -4240,8 +4151,8 @@ void GLCanvas3D::render() _render_background(); // textured bed needs to be rendered after objects if the texture is transparent - bool early_bed_render = is_custom_bed || (theta <= 90.0f); - if (early_bed_render) + bool early_bed_render = m_bed.is_custom() || (theta <= 90.0f); + if (early_bed_render) _render_bed(theta); _render_objects(); @@ -4281,9 +4192,7 @@ void GLCanvas3D::render() if (m_layers_editing.last_object_id >= 0) m_layers_editing.render_overlay(*this); -#if ENABLE_IMGUI wxGetApp().imgui()->render(); -#endif // ENABLE_IMGUI m_canvas->SwapBuffers(); } @@ -4611,11 +4520,18 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re const Print *print = m_process->fff_print(); float depth = print->get_wipe_tower_depth(); + + // Calculate wipe tower brim spacing. + const DynamicPrintConfig &print_config = wxGetApp().preset_bundle->prints.get_edited_preset().config; + double layer_height = print_config.opt_float("layer_height"); + double first_layer_height = print_config.get_abs_value("first_layer_height", layer_height); + float brim_spacing = print->config().nozzle_diameter.values[0] * 1.25f - first_layer_height * (1. - M_PI_4); + if (!print->is_step_done(psWipeTower)) depth = (900.f/w) * (float)(extruders_count - 1) ; int volume_idx_wipe_tower_new = m_volumes.load_wipe_tower_preview( 1000, x, y, w, depth, (float)height, a, m_use_VBOs && m_initialized, !print->is_step_done(psWipeTower), - print->config().nozzle_diameter.values[0] * 1.25f * 4.5f); + brim_spacing * 4.5f); if (volume_idx_wipe_tower_old != -1) map_glvolume_old_to_new[volume_idx_wipe_tower_old] = volume_idx_wipe_tower_new; } @@ -4635,31 +4551,40 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re if (!m_volumes.empty()) { ModelInstance::EPrintVolumeState state; - bool contained = m_volumes.check_outside_state(m_config, &state); - if (!contained) - { - _set_warning_texture(WarningTexture::ObjectOutside, true); - post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, state == ModelInstance::PVS_Fully_Outside)); - } - else - { - m_volumes.reset_outside_state(); - _set_warning_texture(WarningTexture::ObjectOutside, false); - post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, !m_model->objects.empty())); - } + const bool contained_min_one = m_volumes.check_outside_state(m_config, &state); + + _set_warning_texture(WarningTexture::ObjectClashed, state == ModelInstance::PVS_Partly_Outside); + _set_warning_texture(WarningTexture::ObjectOutside, state == ModelInstance::PVS_Fully_Outside); + + post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, + contained_min_one && !m_model->objects.empty() && state != ModelInstance::PVS_Partly_Outside)); + +// #ys_FIXME_delete_after_testing +// bool contained = m_volumes.check_outside_state(m_config, &state); +// if (!contained) +// { +// _set_warning_texture(WarningTexture::ObjectOutside, true); +// post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, state == ModelInstance::PVS_Fully_Outside)); +// } +// else +// { +// m_volumes.reset_outside_state(); +// _set_warning_texture(WarningTexture::ObjectOutside, false); +// post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, !m_model->objects.empty())); +// } } else { _set_warning_texture(WarningTexture::ObjectOutside, false); + _set_warning_texture(WarningTexture::ObjectClashed, false); post_event(Event(EVT_GLCANVAS_ENABLE_ACTION_BUTTONS, false)); } // restore to default value m_regenerate_volumes = true; - m_camera.set_scene_box(scene_bounding_box(), *this); - m_camera.set_target(m_camera.get_target(), *this); + m_camera.set_scene_box(scene_bounding_box()); if (m_selection.is_empty()) { @@ -4833,13 +4758,11 @@ void GLCanvas3D::on_char(wxKeyEvent& evt) int keyCode = evt.GetKeyCode(); int ctrlMask = wxMOD_CONTROL; -#if ENABLE_IMGUI auto imgui = wxGetApp().imgui(); if (imgui->update_key_data(evt)) { render(); return; } -#endif // ENABLE_IMGUI //#ifdef __APPLE__ // ctrlMask |= wxMOD_RAW_CONTROL; @@ -4947,12 +4870,10 @@ void GLCanvas3D::on_key(wxKeyEvent& evt) { const int keyCode = evt.GetKeyCode(); -#if ENABLE_IMGUI auto imgui = wxGetApp().imgui(); if (imgui->update_key_data(evt)) { render(); } else -#endif // ENABLE_IMGUI if (evt.GetEventType() == wxEVT_KEY_UP) { if (m_tab_down && keyCode == WXK_TAB && !evt.HasAnyModifiers()) { // Enable switching between 3D and Preview with Tab @@ -5075,7 +4996,6 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) Point pos(evt.GetX(), evt.GetY()); -#if ENABLE_IMGUI ImGuiWrapper *imgui = wxGetApp().imgui(); if (imgui->update_mouse_data(evt)) { m_mouse.position = evt.Leaving() ? Vec2d(-1.0, -1.0) : pos.cast(); @@ -5085,7 +5005,6 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) #endif /* SLIC3R_DEBUG_MOUSE_EVENTS */ return; } -#endif // ENABLE_IMGUI #ifdef __WXMSW__ bool on_enter_workaround = false; @@ -5113,7 +5032,7 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) m_layers_editing.select_object(*m_model, layer_editing_object_idx); bool gizmos_overlay_contains_mouse = m_gizmos.overlay_contains_mouse(*this, m_mouse.position); int toolbar_contains_mouse = m_toolbar.contains_mouse(m_mouse.position, *this); - int view_toolbar_contains_mouse = (m_view_toolbar != nullptr) ? m_view_toolbar->contains_mouse(m_mouse.position, *this) : -1; + int view_toolbar_contains_mouse = m_view_toolbar.contains_mouse(m_mouse.position, *this); #if ENABLE_MOVE_MIN_THRESHOLD if (m_mouse.drag.move_requires_threshold && m_mouse.is_move_start_threshold_position_2D_defined() && m_mouse.is_move_threshold_met(pos)) @@ -5225,10 +5144,7 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) // event was taken care of by the SlaSupports gizmo } else if (evt.LeftDown() && (view_toolbar_contains_mouse != -1)) - { - if (m_view_toolbar != nullptr) - m_view_toolbar->do_action((unsigned int)view_toolbar_contains_mouse, *this); - } + m_view_toolbar.do_action((unsigned int)view_toolbar_contains_mouse, *this); else if (evt.LeftDown() && (toolbar_contains_mouse != -1)) { m_toolbar_action_running = true; @@ -5294,42 +5210,6 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) m_moving = true; } } - else if (evt.RightDown()) - { - m_mouse.position = pos.cast(); - // forces a frame render to ensure that m_hover_volume_id is updated even when the user right clicks while - // the context menu is already shown - render(); - if (m_hover_volume_id != -1) - { - // if right clicking on volume, propagate event through callback (shows context menu) - if (m_volumes.volumes[m_hover_volume_id]->hover - && !m_volumes.volumes[m_hover_volume_id]->is_wipe_tower // no context menu for the wipe tower - && m_gizmos.get_current_type() != Gizmos::SlaSupports) // disable context menu when the gizmo is open - { - // forces the selection of the volume - /** #ys_FIXME_to_delete after testing: - * Next condition allows a multiple instance selection for the context menu, - * which has no reason. So it's commented till next testing - */ -// if (!m_selection.is_multiple_full_instance()) // #ys_FIXME_to_delete - m_selection.add(m_hover_volume_id); - m_gizmos.update_on_off_state(m_selection); - post_event(SimpleEvent(EVT_GLCANVAS_OBJECT_SELECT)); - _update_gizmos_data(); - wxGetApp().obj_manipul()->update_settings_value(m_selection); - // forces a frame render to update the view before the context menu is shown - render(); - - Vec2d logical_pos = pos.cast(); -#if ENABLE_RETINA_GL - const float factor = m_retina_helper->get_scale_factor(); - logical_pos = logical_pos.cwiseQuotient(Vec2d(factor, factor)); -#endif // ENABLE_RETINA_GL - post_event(Vec2dEvent(EVT_GLCANVAS_RIGHT_CLICK, logical_pos)); - } - } - } } } } @@ -5459,9 +5339,6 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) const Vec3d& orig = m_mouse.drag.start_position_3D; m_camera.phi += (((float)pos(0) - (float)orig(0)) * TRACKBALLSIZE); m_camera.set_theta(m_camera.get_theta() - ((float)pos(1) - (float)orig(1)) * TRACKBALLSIZE, wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() != ptSLA); - - viewport_changed(); - m_dirty = true; } m_mouse.drag.start_position_3D = Vec3d((double)pos(0), (double)pos(1), 0.0); @@ -5475,10 +5352,7 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) float z = 0.0f; const Vec3d& cur_pos = _mouse_to_3d(pos, &z); Vec3d orig = _mouse_to_3d(m_mouse.drag.start_position_2D, &z); - m_camera.set_target(m_camera.get_target() + orig - cur_pos, *this); - - viewport_changed(); - + m_camera.set_target(m_camera.get_target() + orig - cur_pos); m_dirty = true; } @@ -5498,7 +5372,7 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) { // the gizmo got the event and took some action, no need to do anything more } - else if ((m_mouse.drag.move_volume_idx != -1) && m_mouse.dragging) + else if ((m_mouse.drag.move_volume_idx != -1) && m_mouse.dragging && m_gizmos.get_current_type() != Gizmos::SlaSupports) { m_regenerate_volumes = false; do_move(); @@ -5555,8 +5429,38 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) // Let the platter know that the dragging finished, so a delayed refresh // of the scene with the background processing data should be performed. post_event(SimpleEvent(EVT_GLCANVAS_MOUSE_DRAGGING_FINISHED)); - m_camera.set_scene_box(scene_bounding_box(), *this); - set_camera_zoom(0.0f); + m_camera.set_scene_box(scene_bounding_box()); + } + else if (evt.RightUp()) + { + m_mouse.position = pos.cast(); + // forces a frame render to ensure that m_hover_volume_id is updated even when the user right clicks while + // the context menu is already shown + render(); + if (m_hover_volume_id != -1) + { + // if right clicking on volume, propagate event through callback (shows context menu) + if (m_volumes.volumes[m_hover_volume_id]->hover + && !m_volumes.volumes[m_hover_volume_id]->is_wipe_tower // no context menu for the wipe tower + && m_gizmos.get_current_type() != Gizmos::SlaSupports) // disable context menu when the gizmo is open + { + // forces the selection of the volume + m_selection.add(m_hover_volume_id); + m_gizmos.update_on_off_state(m_selection); + post_event(SimpleEvent(EVT_GLCANVAS_OBJECT_SELECT)); + _update_gizmos_data(); + wxGetApp().obj_manipul()->update_settings_value(m_selection); + // forces a frame render to update the view before the context menu is shown + render(); + + Vec2d logical_pos = pos.cast(); +#if ENABLE_RETINA_GL + const float factor = m_retina_helper->get_scale_factor(); + logical_pos = logical_pos.cwiseQuotient(Vec2d(factor, factor)); +#endif // ENABLE_RETINA_GL + post_event(Vec2dEvent(EVT_GLCANVAS_RIGHT_CLICK, logical_pos)); + } + } } m_moving = false; @@ -5586,9 +5490,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) tooltip = m_toolbar.update_hover_state(m_mouse.position, *this); // updates view toolbar overlay - if (tooltip.empty() && (m_view_toolbar != nullptr)) + if (tooltip.empty()) { - tooltip = m_view_toolbar->update_hover_state(m_mouse.position, *this); + tooltip = m_view_toolbar.update_hover_state(m_mouse.position, *this); if (!tooltip.empty()) m_dirty = true; } @@ -5671,12 +5575,6 @@ void GLCanvas3D::set_tooltip(const std::string& tooltip) const } } -#if !ENABLE_IMGUI -void GLCanvas3D::set_external_gizmo_widgets_parent(wxWindow *parent) -{ - m_external_gizmo_widgets_parent = parent; -} -#endif // not ENABLE_IMGUI void GLCanvas3D::do_move() { @@ -5902,7 +5800,6 @@ void GLCanvas3D::set_camera_zoom(float zoom) zoom = std::min(zoom, 100.0f); m_camera.zoom = zoom; - viewport_changed(); _refresh_if_shown_on_screen(); } @@ -5978,6 +5875,9 @@ bool GLCanvas3D::_init_toolbar() return true; } +#if ENABLE_SVG_ICONS + m_toolbar.set_icons_size(40); +#endif // ENABLE_SVG_ICONS // m_toolbar.set_layout_type(GLToolbar::Layout::Vertical); m_toolbar.set_layout_type(GLToolbar::Layout::Horizontal); m_toolbar.set_layout_orientation(GLToolbar::Layout::Top); @@ -6107,14 +6007,12 @@ void GLCanvas3D::_resize(unsigned int w, unsigned int h) if ((m_canvas == nullptr) && (m_context == nullptr)) return; -#if ENABLE_IMGUI wxGetApp().imgui()->set_display_size((float)w, (float)h); #if ENABLE_RETINA_GL wxGetApp().imgui()->set_style_scaling(m_retina_helper->get_scale_factor()); #else wxGetApp().imgui()->set_style_scaling(m_canvas->GetContentScaleFactor()); #endif -#endif // ENABLE_IMGUI // ensures that this canvas is current _set_current(); @@ -6182,8 +6080,7 @@ void GLCanvas3D::_resize(unsigned int w, unsigned int h) BoundingBoxf3 GLCanvas3D::_max_bounding_box() const { BoundingBoxf3 bb = volumes_bounding_box(); - if (m_bed != nullptr) - bb.merge(m_bed->get_bounding_box()); + bb.merge(m_bed.get_bounding_box()); return bb; } @@ -6195,10 +6092,7 @@ void GLCanvas3D::_zoom_to_bounding_box(const BoundingBoxf3& bbox) { m_camera.zoom = zoom; // center view around bounding box center - m_camera.set_target(bbox.center(), *this); - - viewport_changed(); - + m_camera.set_target(bbox.center()); m_dirty = true; } } @@ -6290,7 +6184,6 @@ void GLCanvas3D::_camera_tranform() const ::glRotatef(-m_camera.get_theta(), 1.0f, 0.0f, 0.0f); // pitch ::glRotatef(m_camera.phi, 0.0f, 0.0f, 1.0f); // yaw - Vec3d target = -m_camera.get_target(); ::glTranslated(target(0), target(1), target(2)); } @@ -6329,7 +6222,6 @@ void GLCanvas3D::_picking_pass() const ::glReadPixels(pos(0), cnv_size.get_height() - pos(1) - 1, 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, (void*)color); volume_id = color[0] + color[1] * 256 + color[2] * 256 * 256; } - if ((0 <= volume_id) && (volume_id < (int)m_volumes.volumes.size())) { m_hover_volume_id = volume_id; @@ -6338,7 +6230,7 @@ void GLCanvas3D::_picking_pass() const else { m_hover_volume_id = -1; - m_gizmos.set_hover_id(inside ? (254 - (int)color[2]) : -1); + m_gizmos.set_hover_id(inside && volume_id <= GLGizmoBase::BASE_ID ? (GLGizmoBase::BASE_ID - volume_id) : -1); } _update_volumes_hover_state(); @@ -6386,16 +6278,13 @@ void GLCanvas3D::_render_bed(float theta) const float scale_factor = 1.0; #if ENABLE_RETINA_GL scale_factor = m_retina_helper->get_scale_factor(); -#endif - - if (m_bed != nullptr) - m_bed->render(theta, m_use_VBOs, scale_factor); +#endif // ENABLE_RETINA_GL + m_bed.render(theta, m_use_VBOs, scale_factor); } void GLCanvas3D::_render_axes() const { - if (m_bed != nullptr) - m_bed->render_axes(); + m_bed.render_axes(); } void GLCanvas3D::_render_objects() const @@ -6413,9 +6302,9 @@ void GLCanvas3D::_render_objects() const // Update the layer editing selection to the first object selected, update the current object maximum Z. const_cast(m_layers_editing).select_object(*m_model, this->is_layers_editing_enabled() ? m_selection.get_object_idx() : -1); - if ((m_config != nullptr) && (m_bed != nullptr)) + if (m_config != nullptr) { - const BoundingBoxf3& bed_bb = m_bed->get_bounding_box(); + const BoundingBoxf3& bed_bb = m_bed.get_bounding_box(); m_volumes.set_print_box((float)bed_bb.min(0), (float)bed_bb.min(1), 0.0f, (float)bed_bb.max(0), (float)bed_bb.max(1), (float)m_config->opt_float("max_print_height")); m_volumes.check_outside_state(m_config, nullptr); } @@ -6597,7 +6486,7 @@ void GLCanvas3D::_render_toolbar() const } else { - top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar->get_height()) * inv_zoom; + top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar.get_height()) * inv_zoom; left = -0.5f * m_toolbar.get_width() * inv_zoom; } break; @@ -6632,31 +6521,29 @@ void GLCanvas3D::_render_toolbar() const void GLCanvas3D::_render_view_toolbar() const { - if (m_view_toolbar != nullptr) { #if ENABLE_SVG_ICONS #if ENABLE_RETINA_GL - m_view_toolbar->set_scale(m_retina_helper->get_scale_factor()); + m_view_toolbar.set_scale(m_retina_helper->get_scale_factor()); #else - m_view_toolbar->set_scale(m_canvas->GetContentScaleFactor()); + m_view_toolbar.set_scale(m_canvas->GetContentScaleFactor()); #endif // ENABLE_RETINA_GL - Size cnv_size = get_canvas_size(); - float zoom = get_camera_zoom(); - float inv_zoom = (zoom != 0.0f) ? 1.0f / zoom : 0.0f; + Size cnv_size = get_canvas_size(); + float zoom = get_camera_zoom(); + float inv_zoom = (zoom != 0.0f) ? 1.0f / zoom : 0.0f; - // places the toolbar on the bottom-left corner of the 3d scene - float top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar->get_height()) * inv_zoom; - float left = -0.5f * (float)cnv_size.get_width() * inv_zoom; - m_view_toolbar->set_position(top, left); + // places the toolbar on the bottom-left corner of the 3d scene + float top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar.get_height()) * inv_zoom; + float left = -0.5f * (float)cnv_size.get_width() * inv_zoom; + m_view_toolbar.set_position(top, left); #else #if ENABLE_RETINA_GL - m_view_toolbar->set_icons_scale(m_retina_helper->get_scale_factor()); + m_view_toolbar.set_icons_scale(m_retina_helper->get_scale_factor()); #else - m_view_toolbar->set_icons_scale(m_canvas->GetContentScaleFactor()); + m_view_toolbar.set_icons_scale(m_canvas->GetContentScaleFactor()); #endif /* __WXMSW__ */ #endif // ENABLE_SVG_ICONS - m_view_toolbar->render(*this); - } + m_view_toolbar.render(*this); } #if ENABLE_SHOW_CAMERA_TARGET @@ -7908,10 +7795,17 @@ void GLCanvas3D::_load_shells_fff() unsigned int extruders_count = config.nozzle_diameter.size(); if ((extruders_count > 1) && config.single_extruder_multi_material && config.wipe_tower && !config.complete_objects) { float depth = print->get_wipe_tower_depth(); + + // Calculate wipe tower brim spacing. + const DynamicPrintConfig &print_config = wxGetApp().preset_bundle->prints.get_edited_preset().config; + double layer_height = print_config.opt_float("layer_height"); + double first_layer_height = print_config.get_abs_value("first_layer_height", layer_height); + float brim_spacing = print->config().nozzle_diameter.values[0] * 1.25f - first_layer_height * (1. - M_PI_4); + if (!print->is_step_done(psWipeTower)) depth = (900.f/config.wipe_tower_width) * (float)(extruders_count - 1) ; m_volumes.load_wipe_tower_preview(1000, config.wipe_tower_x, config.wipe_tower_y, config.wipe_tower_width, depth, max_z, config.wipe_tower_rotation_angle, - m_use_VBOs && m_initialized, !print->is_step_done(psWipeTower), print->config().nozzle_diameter.values[0] * 1.25f * 4.5f); + m_use_VBOs && m_initialized, !print->is_step_done(psWipeTower), brim_spacing * 4.5f); } } } @@ -8172,7 +8066,7 @@ void GLCanvas3D::_resize_toolbars() const } else { - top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar->get_height()) * inv_zoom; + top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar.get_height()) * inv_zoom; left = -0.5f * m_toolbar.get_width() * inv_zoom; } m_toolbar.set_position(top, left); @@ -8200,15 +8094,15 @@ void GLCanvas3D::_resize_toolbars() const if (m_view_toolbar != nullptr) { #if ENABLE_RETINA_GL - m_view_toolbar->set_icons_scale(m_retina_helper->get_scale_factor()); + m_view_toolbar.set_icons_scale(m_retina_helper->get_scale_factor()); #else - m_view_toolbar->set_icons_scale(m_canvas->GetContentScaleFactor()); + m_view_toolbar.set_icons_scale(m_canvas->GetContentScaleFactor()); #endif /* __WXMSW__ */ // places the toolbar on the bottom-left corner of the 3d scene - float top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar->get_height()) * inv_zoom; + float top = (-0.5f * (float)cnv_size.get_height() + m_view_toolbar.get_height()) * inv_zoom; float left = -0.5f * (float)cnv_size.get_width() * inv_zoom; - m_view_toolbar->set_position(top, left); + m_view_toolbar.set_position(top, left); } } #endif // !ENABLE_SVG_ICONS diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp index ae6155876..4ec0f076b 100644 --- a/src/slic3r/GUI/GLCanvas3D.hpp +++ b/src/slic3r/GUI/GLCanvas3D.hpp @@ -9,6 +9,7 @@ #include "GLToolbar.hpp" #include "Event.hpp" #include "3DBed.hpp" +#include "Camera.hpp" #include @@ -100,7 +101,6 @@ template using Vec3dsEvent = ArrayEvent; wxDECLARE_EVENT(EVT_GLCANVAS_INIT, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS, SimpleEvent); -wxDECLARE_EVENT(EVT_GLCANVAS_VIEWPORT_CHANGED, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_RIGHT_CLICK, Vec2dEvent); wxDECLARE_EVENT(EVT_GLCANVAS_REMOVE_OBJECT, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_ARRANGE, SimpleEvent); @@ -162,41 +162,6 @@ class GLCanvas3D void reset() { first_volumes.clear(); } }; - struct Camera - { - enum EType : unsigned char - { - Unknown, -// Perspective, - Ortho, - Num_types - }; - - EType type; - float zoom; - float phi; -// float distance; - - private: - Vec3d m_target; - BoundingBoxf3 m_scene_box; - float m_theta; - - public: - Camera(); - - std::string get_type_as_string() const; - - float get_theta() const { return m_theta; } - void set_theta(float theta, bool apply_limit); - - const Vec3d& get_target() const { return m_target; } - void set_target(const Vec3d& target, GLCanvas3D& canvas); - - const BoundingBoxf3& get_scene_box() const { return m_scene_box; } - void set_scene_box(const BoundingBoxf3& box, GLCanvas3D& canvas); - }; - #if !ENABLE_TEXTURES_FROM_SVG class Shader { @@ -785,10 +750,6 @@ private: void render_overlay(const GLCanvas3D& canvas, const Selection& selection) const; -#if !ENABLE_IMGUI - void create_external_gizmo_widgets(wxWindow *parent); -#endif // not ENABLE_IMGUI - private: void reset(); @@ -829,7 +790,8 @@ private: enum Warning { ObjectOutside, ToolpathOutside, - SomethingNotShown + SomethingNotShown, + ObjectClashed }; // Sets a warning of the given type to be active/inactive. If several warnings are active simultaneously, @@ -848,7 +810,7 @@ private: std::vector m_warnings; // Generates the texture with given text. - bool _generate(const std::string& msg, const GLCanvas3D& canvas); + bool _generate(const std::string& msg, const GLCanvas3D& canvas, const bool red_colored = false); }; class LegendTexture : public GUI::GLTexture @@ -885,14 +847,14 @@ private: LegendTexture m_legend_texture; WarningTexture m_warning_texture; wxTimer m_timer; - Camera m_camera; - Bed3D* m_bed; + Bed3D& m_bed; + Camera& m_camera; + GLToolbar& m_view_toolbar; LayersEditing m_layers_editing; Shader m_shader; Mouse m_mouse; mutable Gizmos m_gizmos; mutable GLToolbar m_toolbar; - GLToolbar* m_view_toolbar; ClippingPlane m_clipping_planes[2]; bool m_use_clipping_planes; mutable SlaCap m_sla_caps[2]; @@ -908,7 +870,6 @@ private: bool m_dirty; bool m_initialized; bool m_use_VBOs; - bool m_requires_zoom_to_bed; bool m_apply_zoom_to_volumes_filter; mutable int m_hover_volume_id; bool m_toolbar_action_running; @@ -929,12 +890,8 @@ private: GCodePreviewVolumeIndex m_gcode_preview_volume_index; -#if !ENABLE_IMGUI - wxWindow *m_external_gizmo_widgets_parent; -#endif // not ENABLE_IMGUI - public: - GLCanvas3D(wxGLCanvas* canvas); + GLCanvas3D(wxGLCanvas* canvas, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar); ~GLCanvas3D(); void set_context(wxGLContext* context) { m_context = context; } @@ -942,10 +899,6 @@ public: wxGLCanvas* get_wxglcanvas() { return m_canvas; } const wxGLCanvas* get_wxglcanvas() const { return m_canvas; } - void set_bed(Bed3D* bed) { m_bed = bed; } - - void set_view_toolbar(GLToolbar* toolbar) { m_view_toolbar = toolbar; } - bool init(bool useVBOs, bool use_legacy_opengl); void post_event(wxEvent &&event); @@ -1005,17 +958,11 @@ public: void zoom_to_volumes(); void zoom_to_selection(); void select_view(const std::string& direction); - void set_viewport_from_scene(const GLCanvas3D& other); void update_volumes_colors_by_extruder(); void update_toolbar_items_visibility(); -#if !ENABLE_IMGUI - Rect get_gizmo_reset_rect(const GLCanvas3D& canvas, bool viewport) const; - bool gizmo_reset_rect_contains(const GLCanvas3D& canvas, float x, float y) const; -#endif // not ENABLE_IMGUI - bool is_dragging() const { return m_gizmos.is_dragging() || m_moving; } void render(); @@ -1056,10 +1003,6 @@ public: void set_tooltip(const std::string& tooltip) const; -#if !ENABLE_IMGUI - void set_external_gizmo_widgets_parent(wxWindow *parent); -#endif // not ENABLE_IMGUI - void do_move(); void do_rotate(); void do_scale(); @@ -1070,8 +1013,6 @@ public: void update_gizmos_on_off_state(); - void viewport_changed(); - void handle_sidebar_focus_event(const std::string& opt_key, bool focus_on); void update_ui_from_settings(); diff --git a/src/slic3r/GUI/GLCanvas3DManager.cpp b/src/slic3r/GUI/GLCanvas3DManager.cpp index 71299f777..e409bed0d 100644 --- a/src/slic3r/GUI/GLCanvas3DManager.cpp +++ b/src/slic3r/GUI/GLCanvas3DManager.cpp @@ -129,7 +129,7 @@ GLCanvas3DManager::~GLCanvas3DManager() } } -bool GLCanvas3DManager::add(wxGLCanvas* canvas) +bool GLCanvas3DManager::add(wxGLCanvas* canvas, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar) { if (canvas == nullptr) return false; @@ -137,7 +137,7 @@ bool GLCanvas3DManager::add(wxGLCanvas* canvas) if (_get_canvas(canvas) != m_canvases.end()) return false; - GLCanvas3D* canvas3D = new GLCanvas3D(canvas); + GLCanvas3D* canvas3D = new GLCanvas3D(canvas, bed, camera, view_toolbar); if (canvas3D == nullptr) return false; diff --git a/src/slic3r/GUI/GLCanvas3DManager.hpp b/src/slic3r/GUI/GLCanvas3DManager.hpp index 1f7c49f72..75647e6b2 100644 --- a/src/slic3r/GUI/GLCanvas3DManager.hpp +++ b/src/slic3r/GUI/GLCanvas3DManager.hpp @@ -23,6 +23,9 @@ class PrintObject; namespace GUI { class GLCanvas3D; +class Bed3D; +class GLToolbar; +struct Camera; class GLCanvas3DManager { @@ -62,7 +65,7 @@ public: GLCanvas3DManager(); ~GLCanvas3DManager(); - bool add(wxGLCanvas* canvas); + bool add(wxGLCanvas* canvas, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar); bool remove(wxGLCanvas* canvas); void remove_all(); diff --git a/src/slic3r/GUI/GLGizmo.cpp b/src/slic3r/GUI/GLGizmo.cpp deleted file mode 100644 index 22023825f..000000000 --- a/src/slic3r/GUI/GLGizmo.cpp +++ /dev/null @@ -1,2862 +0,0 @@ -// Include GLGizmo.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. -#include "GLGizmo.hpp" - -#include -#include - -#include "libslic3r/libslic3r.h" -#include "libslic3r/Geometry.hpp" -#include "libslic3r/Utils.hpp" -#include "libslic3r/SLA/SLACommon.hpp" -#include "libslic3r/SLAPrint.hpp" - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "Tab.hpp" -#include "GUI.hpp" -#include "GUI_Utils.hpp" -#include "GUI_App.hpp" -#include "GUI_ObjectSettings.hpp" -#include "GUI_ObjectList.hpp" -#include "I18N.hpp" -#include "PresetBundle.hpp" - -#include - -// TODO: Display tooltips quicker on Linux - -static const float DEFAULT_BASE_COLOR[3] = { 0.625f, 0.625f, 0.625f }; -static const float DEFAULT_DRAG_COLOR[3] = { 1.0f, 1.0f, 1.0f }; -static const float DEFAULT_HIGHLIGHT_COLOR[3] = { 1.0f, 0.38f, 0.0f }; - -static const float AXES_COLOR[3][3] = { { 1.0f, 0.0f, 0.0f }, { 0.0f, 1.0f, 0.0f }, { 0.0f, 0.0f, 1.0f } }; - -namespace Slic3r { -namespace GUI { - -const float GLGizmoBase::Grabber::SizeFactor = 0.025f; -const float GLGizmoBase::Grabber::MinHalfSize = 1.5f; -const float GLGizmoBase::Grabber::DraggingScaleFactor = 1.25f; - -GLGizmoBase::Grabber::Grabber() - : center(Vec3d::Zero()) - , angles(Vec3d::Zero()) - , dragging(false) - , enabled(true) -{ - color[0] = 1.0f; - color[1] = 1.0f; - color[2] = 1.0f; -} - -void GLGizmoBase::Grabber::render(bool hover, float size) const -{ - float render_color[3]; - if (hover) - { - render_color[0] = 1.0f - color[0]; - render_color[1] = 1.0f - color[1]; - render_color[2] = 1.0f - color[2]; - } - else - ::memcpy((void*)render_color, (const void*)color, 3 * sizeof(float)); - - render(size, render_color, true); -} - -float GLGizmoBase::Grabber::get_half_size(float size) const -{ - return std::max(size * SizeFactor, MinHalfSize); -} - -float GLGizmoBase::Grabber::get_dragging_half_size(float size) const -{ - return std::max(size * SizeFactor * DraggingScaleFactor, MinHalfSize); -} - -void GLGizmoBase::Grabber::render(float size, const float* render_color, bool use_lighting) const -{ - float half_size = dragging ? get_dragging_half_size(size) : get_half_size(size); - - if (use_lighting) - ::glEnable(GL_LIGHTING); - - ::glColor3fv(render_color); - - ::glPushMatrix(); - ::glTranslated(center(0), center(1), center(2)); - - ::glRotated(Geometry::rad2deg(angles(2)), 0.0, 0.0, 1.0); - ::glRotated(Geometry::rad2deg(angles(1)), 0.0, 1.0, 0.0); - ::glRotated(Geometry::rad2deg(angles(0)), 1.0, 0.0, 0.0); - - // face min x - ::glPushMatrix(); - ::glTranslatef(-(GLfloat)half_size, 0.0f, 0.0f); - ::glRotatef(-90.0f, 0.0f, 1.0f, 0.0f); - render_face(half_size); - ::glPopMatrix(); - - // face max x - ::glPushMatrix(); - ::glTranslatef((GLfloat)half_size, 0.0f, 0.0f); - ::glRotatef(90.0f, 0.0f, 1.0f, 0.0f); - render_face(half_size); - ::glPopMatrix(); - - // face min y - ::glPushMatrix(); - ::glTranslatef(0.0f, -(GLfloat)half_size, 0.0f); - ::glRotatef(90.0f, 1.0f, 0.0f, 0.0f); - render_face(half_size); - ::glPopMatrix(); - - // face max y - ::glPushMatrix(); - ::glTranslatef(0.0f, (GLfloat)half_size, 0.0f); - ::glRotatef(-90.0f, 1.0f, 0.0f, 0.0f); - render_face(half_size); - ::glPopMatrix(); - - // face min z - ::glPushMatrix(); - ::glTranslatef(0.0f, 0.0f, -(GLfloat)half_size); - ::glRotatef(180.0f, 1.0f, 0.0f, 0.0f); - render_face(half_size); - ::glPopMatrix(); - - // face max z - ::glPushMatrix(); - ::glTranslatef(0.0f, 0.0f, (GLfloat)half_size); - render_face(half_size); - ::glPopMatrix(); - - ::glPopMatrix(); - - if (use_lighting) - ::glDisable(GL_LIGHTING); -} - -void GLGizmoBase::Grabber::render_face(float half_size) const -{ - ::glBegin(GL_TRIANGLES); - ::glNormal3f(0.0f, 0.0f, 1.0f); - ::glVertex3f(-(GLfloat)half_size, -(GLfloat)half_size, 0.0f); - ::glVertex3f((GLfloat)half_size, -(GLfloat)half_size, 0.0f); - ::glVertex3f((GLfloat)half_size, (GLfloat)half_size, 0.0f); - ::glVertex3f((GLfloat)half_size, (GLfloat)half_size, 0.0f); - ::glVertex3f(-(GLfloat)half_size, (GLfloat)half_size, 0.0f); - ::glVertex3f(-(GLfloat)half_size, -(GLfloat)half_size, 0.0f); - ::glEnd(); -} - -#if ENABLE_SVG_ICONS -GLGizmoBase::GLGizmoBase(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) -#else -GLGizmoBase::GLGizmoBase(GLCanvas3D& parent, unsigned int sprite_id) -#endif // ENABLE_SVG_ICONS - : m_parent(parent) - , m_group_id(-1) - , m_state(Off) - , m_shortcut_key(0) -#if ENABLE_SVG_ICONS - , m_icon_filename(icon_filename) -#endif // ENABLE_SVG_ICONS - , m_sprite_id(sprite_id) - , m_hover_id(-1) - , m_dragging(false) -#if ENABLE_IMGUI - , m_imgui(wxGetApp().imgui()) -#endif // ENABLE_IMGUI -{ - ::memcpy((void*)m_base_color, (const void*)DEFAULT_BASE_COLOR, 3 * sizeof(float)); - ::memcpy((void*)m_drag_color, (const void*)DEFAULT_DRAG_COLOR, 3 * sizeof(float)); - ::memcpy((void*)m_highlight_color, (const void*)DEFAULT_HIGHLIGHT_COLOR, 3 * sizeof(float)); -} - -void GLGizmoBase::set_hover_id(int id) -{ - if (m_grabbers.empty() || (id < (int)m_grabbers.size())) - { - m_hover_id = id; - on_set_hover_id(); - } -} - -void GLGizmoBase::set_highlight_color(const float* color) -{ - if (color != nullptr) - ::memcpy((void*)m_highlight_color, (const void*)color, 3 * sizeof(float)); -} - -void GLGizmoBase::enable_grabber(unsigned int id) -{ - if ((0 <= id) && (id < (unsigned int)m_grabbers.size())) - m_grabbers[id].enabled = true; - - on_enable_grabber(id); -} - -void GLGizmoBase::disable_grabber(unsigned int id) -{ - if ((0 <= id) && (id < (unsigned int)m_grabbers.size())) - m_grabbers[id].enabled = false; - - on_disable_grabber(id); -} - -void GLGizmoBase::start_dragging(const GLCanvas3D::Selection& selection) -{ - m_dragging = true; - - for (int i = 0; i < (int)m_grabbers.size(); ++i) - { - m_grabbers[i].dragging = (m_hover_id == i); - } - - on_start_dragging(selection); -} - -void GLGizmoBase::stop_dragging() -{ - m_dragging = false; - - for (int i = 0; i < (int)m_grabbers.size(); ++i) - { - m_grabbers[i].dragging = false; - } - - on_stop_dragging(); -} - -void GLGizmoBase::update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) - on_update(data, selection); -} - -float GLGizmoBase::picking_color_component(unsigned int id) const -{ - int color = 254 - (int)id; - if (m_group_id > -1) - color -= m_group_id; - - return (float)color / 255.0f; -} - -void GLGizmoBase::render_grabbers(const BoundingBoxf3& box) const -{ - float size = (float)box.max_size(); - - for (int i = 0; i < (int)m_grabbers.size(); ++i) - { - if (m_grabbers[i].enabled) - m_grabbers[i].render((m_hover_id == i), size); - } -} - -void GLGizmoBase::render_grabbers(float size) const -{ - for (int i = 0; i < (int)m_grabbers.size(); ++i) - { - if (m_grabbers[i].enabled) - m_grabbers[i].render((m_hover_id == i), size); - } -} - -void GLGizmoBase::render_grabbers_for_picking(const BoundingBoxf3& box) const -{ - float size = (float)box.max_size(); - - for (unsigned int i = 0; i < (unsigned int)m_grabbers.size(); ++i) - { - if (m_grabbers[i].enabled) - { - m_grabbers[i].color[0] = 1.0f; - m_grabbers[i].color[1] = 1.0f; - m_grabbers[i].color[2] = picking_color_component(i); - m_grabbers[i].render_for_picking(size); - } - } -} - -#if !ENABLE_IMGUI -void GLGizmoBase::create_external_gizmo_widgets(wxWindow *parent) {} -#endif // not ENABLE_IMGUI - -void GLGizmoBase::set_tooltip(const std::string& tooltip) const -{ - m_parent.set_tooltip(tooltip); -} - -std::string GLGizmoBase::format(float value, unsigned int decimals) const -{ - return Slic3r::string_printf("%.*f", decimals, value); -} - -const float GLGizmoRotate::Offset = 5.0f; -const unsigned int GLGizmoRotate::CircleResolution = 64; -const unsigned int GLGizmoRotate::AngleResolution = 64; -const unsigned int GLGizmoRotate::ScaleStepsCount = 72; -const float GLGizmoRotate::ScaleStepRad = 2.0f * (float)PI / GLGizmoRotate::ScaleStepsCount; -const unsigned int GLGizmoRotate::ScaleLongEvery = 2; -const float GLGizmoRotate::ScaleLongTooth = 0.1f; // in percent of radius -const unsigned int GLGizmoRotate::SnapRegionsCount = 8; -const float GLGizmoRotate::GrabberOffset = 0.15f; // in percent of radius - -GLGizmoRotate::GLGizmoRotate(GLCanvas3D& parent, GLGizmoRotate::Axis axis) -#if ENABLE_SVG_ICONS - : GLGizmoBase(parent, "", -1) -#else - : GLGizmoBase(parent, -1) -#endif // ENABLE_SVG_ICONS - , m_axis(axis) - , m_angle(0.0) - , m_quadric(nullptr) - , m_center(0.0, 0.0, 0.0) - , m_radius(0.0f) - , m_snap_coarse_in_radius(0.0f) - , m_snap_coarse_out_radius(0.0f) - , m_snap_fine_in_radius(0.0f) - , m_snap_fine_out_radius(0.0f) -{ - m_quadric = ::gluNewQuadric(); - if (m_quadric != nullptr) - ::gluQuadricDrawStyle(m_quadric, GLU_FILL); -} - -GLGizmoRotate::GLGizmoRotate(const GLGizmoRotate& other) -#if ENABLE_SVG_ICONS - : GLGizmoBase(other.m_parent, other.m_icon_filename, other.m_sprite_id) -#else - : GLGizmoBase(other.m_parent, other.m_sprite_id) -#endif // ENABLE_SVG_ICONS - , m_axis(other.m_axis) - , m_angle(other.m_angle) - , m_quadric(nullptr) - , m_center(other.m_center) - , m_radius(other.m_radius) - , m_snap_coarse_in_radius(other.m_snap_coarse_in_radius) - , m_snap_coarse_out_radius(other.m_snap_coarse_out_radius) - , m_snap_fine_in_radius(other.m_snap_fine_in_radius) - , m_snap_fine_out_radius(other.m_snap_fine_out_radius) -{ - m_quadric = ::gluNewQuadric(); - if (m_quadric != nullptr) - ::gluQuadricDrawStyle(m_quadric, GLU_FILL); -} - -GLGizmoRotate::~GLGizmoRotate() -{ - if (m_quadric != nullptr) - ::gluDeleteQuadric(m_quadric); -} - -void GLGizmoRotate::set_angle(double angle) -{ - if (std::abs(angle - 2.0 * (double)PI) < EPSILON) - angle = 0.0; - - m_angle = angle; -} - -bool GLGizmoRotate::on_init() -{ - m_grabbers.push_back(Grabber()); - return true; -} - -void GLGizmoRotate::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - const BoundingBoxf3& box = selection.get_bounding_box(); - m_center = box.center(); - m_radius = Offset + box.radius(); - m_snap_coarse_in_radius = m_radius / 3.0f; - m_snap_coarse_out_radius = 2.0f * m_snap_coarse_in_radius; - m_snap_fine_in_radius = m_radius; - m_snap_fine_out_radius = m_snap_fine_in_radius + m_radius * ScaleLongTooth; -} - -void GLGizmoRotate::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - Vec2d mouse_pos = to_2d(mouse_position_in_local_plane(data.mouse_ray, selection)); - - Vec2d orig_dir = Vec2d::UnitX(); - Vec2d new_dir = mouse_pos.normalized(); - - double theta = ::acos(clamp(-1.0, 1.0, new_dir.dot(orig_dir))); - if (cross2(orig_dir, new_dir) < 0.0) - theta = 2.0 * (double)PI - theta; - - double len = mouse_pos.norm(); - - // snap to coarse snap region - if ((m_snap_coarse_in_radius <= len) && (len <= m_snap_coarse_out_radius)) - { - double step = 2.0 * (double)PI / (double)SnapRegionsCount; - theta = step * (double)std::round(theta / step); - } - else - { - // snap to fine snap region (scale) - if ((m_snap_fine_in_radius <= len) && (len <= m_snap_fine_out_radius)) - { - double step = 2.0 * (double)PI / (double)ScaleStepsCount; - theta = step * (double)std::round(theta / step); - } - } - - if (theta == 2.0 * (double)PI) - theta = 0.0; - - m_angle = theta; -} - -void GLGizmoRotate::on_render(const GLCanvas3D::Selection& selection) const -{ - if (!m_grabbers[0].enabled) - return; - - const BoundingBoxf3& box = selection.get_bounding_box(); - - std::string axis; - switch (m_axis) - { - case X: { axis = "X"; break; } - case Y: { axis = "Y"; break; } - case Z: { axis = "Z"; break; } - } - - if (!m_dragging && (m_hover_id == 0)) - set_tooltip(axis); - else if (m_dragging) - set_tooltip(axis + ": " + format((float)Geometry::rad2deg(m_angle), 4) + "\u00B0"); - else - { - m_center = box.center(); - m_radius = Offset + box.radius(); - m_snap_coarse_in_radius = m_radius / 3.0f; - m_snap_coarse_out_radius = 2.0f * m_snap_coarse_in_radius; - m_snap_fine_in_radius = m_radius; - m_snap_fine_out_radius = m_radius * (1.0f + ScaleLongTooth); - } - - ::glEnable(GL_DEPTH_TEST); - - ::glPushMatrix(); - transform_to_local(selection); - - ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); - ::glColor3fv((m_hover_id != -1) ? m_drag_color : m_highlight_color); - - render_circle(); - - if (m_hover_id != -1) - { - render_scale(); - render_snap_radii(); - render_reference_radius(); - } - - ::glColor3fv(m_highlight_color); - - if (m_hover_id != -1) - render_angle(); - - render_grabber(box); - render_grabber_extension(box, false); - - ::glPopMatrix(); -} - -void GLGizmoRotate::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glDisable(GL_DEPTH_TEST); - - ::glPushMatrix(); - - transform_to_local(selection); - - const BoundingBoxf3& box = selection.get_bounding_box(); - render_grabbers_for_picking(box); - render_grabber_extension(box, true); - - ::glPopMatrix(); -} - -void GLGizmoRotate::render_circle() const -{ - ::glBegin(GL_LINE_LOOP); - for (unsigned int i = 0; i < ScaleStepsCount; ++i) - { - float angle = (float)i * ScaleStepRad; - float x = ::cos(angle) * m_radius; - float y = ::sin(angle) * m_radius; - float z = 0.0f; - ::glVertex3f((GLfloat)x, (GLfloat)y, (GLfloat)z); - } - ::glEnd(); -} - -void GLGizmoRotate::render_scale() const -{ - float out_radius_long = m_snap_fine_out_radius; - float out_radius_short = m_radius * (1.0f + 0.5f * ScaleLongTooth); - - ::glBegin(GL_LINES); - for (unsigned int i = 0; i < ScaleStepsCount; ++i) - { - float angle = (float)i * ScaleStepRad; - float cosa = ::cos(angle); - float sina = ::sin(angle); - float in_x = cosa * m_radius; - float in_y = sina * m_radius; - float in_z = 0.0f; - float out_x = (i % ScaleLongEvery == 0) ? cosa * out_radius_long : cosa * out_radius_short; - float out_y = (i % ScaleLongEvery == 0) ? sina * out_radius_long : sina * out_radius_short; - float out_z = 0.0f; - ::glVertex3f((GLfloat)in_x, (GLfloat)in_y, (GLfloat)in_z); - ::glVertex3f((GLfloat)out_x, (GLfloat)out_y, (GLfloat)out_z); - } - ::glEnd(); -} - -void GLGizmoRotate::render_snap_radii() const -{ - float step = 2.0f * (float)PI / (float)SnapRegionsCount; - - float in_radius = m_radius / 3.0f; - float out_radius = 2.0f * in_radius; - - ::glBegin(GL_LINES); - for (unsigned int i = 0; i < SnapRegionsCount; ++i) - { - float angle = (float)i * step; - float cosa = ::cos(angle); - float sina = ::sin(angle); - float in_x = cosa * in_radius; - float in_y = sina * in_radius; - float in_z = 0.0f; - float out_x = cosa * out_radius; - float out_y = sina * out_radius; - float out_z = 0.0f; - ::glVertex3f((GLfloat)in_x, (GLfloat)in_y, (GLfloat)in_z); - ::glVertex3f((GLfloat)out_x, (GLfloat)out_y, (GLfloat)out_z); - } - ::glEnd(); -} - -void GLGizmoRotate::render_reference_radius() const -{ - ::glBegin(GL_LINES); - ::glVertex3f(0.0f, 0.0f, 0.0f); - ::glVertex3f((GLfloat)(m_radius * (1.0f + GrabberOffset)), 0.0f, 0.0f); - ::glEnd(); -} - -void GLGizmoRotate::render_angle() const -{ - float step_angle = (float)m_angle / AngleResolution; - float ex_radius = m_radius * (1.0f + GrabberOffset); - - ::glBegin(GL_LINE_STRIP); - for (unsigned int i = 0; i <= AngleResolution; ++i) - { - float angle = (float)i * step_angle; - float x = ::cos(angle) * ex_radius; - float y = ::sin(angle) * ex_radius; - float z = 0.0f; - ::glVertex3f((GLfloat)x, (GLfloat)y, (GLfloat)z); - } - ::glEnd(); -} - -void GLGizmoRotate::render_grabber(const BoundingBoxf3& box) const -{ - double grabber_radius = (double)m_radius * (1.0 + (double)GrabberOffset); - m_grabbers[0].center = Vec3d(::cos(m_angle) * grabber_radius, ::sin(m_angle) * grabber_radius, 0.0); - m_grabbers[0].angles(2) = m_angle; - - ::glColor3fv((m_hover_id != -1) ? m_drag_color : m_highlight_color); - - ::glBegin(GL_LINES); - ::glVertex3f(0.0f, 0.0f, 0.0f); - ::glVertex3dv(m_grabbers[0].center.data()); - ::glEnd(); - - ::memcpy((void*)m_grabbers[0].color, (const void*)m_highlight_color, 3 * sizeof(float)); - render_grabbers(box); -} - -void GLGizmoRotate::render_grabber_extension(const BoundingBoxf3& box, bool picking) const -{ - if (m_quadric == nullptr) - return; - - double size = m_dragging ? (double)m_grabbers[0].get_dragging_half_size((float)box.max_size()) : (double)m_grabbers[0].get_half_size((float)box.max_size()); - - float color[3]; - ::memcpy((void*)color, (const void*)m_grabbers[0].color, 3 * sizeof(float)); - if (!picking && (m_hover_id != -1)) - { - color[0] = 1.0f - color[0]; - color[1] = 1.0f - color[1]; - color[2] = 1.0f - color[2]; - } - - if (!picking) - ::glEnable(GL_LIGHTING); - - ::glColor3fv(color); - ::glPushMatrix(); - ::glTranslated(m_grabbers[0].center(0), m_grabbers[0].center(1), m_grabbers[0].center(2)); - ::glRotated(Geometry::rad2deg(m_angle), 0.0, 0.0, 1.0); - ::glRotated(90.0, 1.0, 0.0, 0.0); - ::glTranslated(0.0, 0.0, 2.0 * size); - ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); - ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); - ::gluQuadricOrientation(m_quadric, GLU_INSIDE); - ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); - ::glPopMatrix(); - ::glPushMatrix(); - ::glTranslated(m_grabbers[0].center(0), m_grabbers[0].center(1), m_grabbers[0].center(2)); - ::glRotated(Geometry::rad2deg(m_angle), 0.0, 0.0, 1.0); - ::glRotated(-90.0, 1.0, 0.0, 0.0); - ::glTranslated(0.0, 0.0, 2.0 * size); - ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); - ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); - ::gluQuadricOrientation(m_quadric, GLU_INSIDE); - ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); - ::glPopMatrix(); - - if (!picking) - ::glDisable(GL_LIGHTING); -} - -void GLGizmoRotate::transform_to_local(const GLCanvas3D::Selection& selection) const -{ - ::glTranslated(m_center(0), m_center(1), m_center(2)); - - if (selection.is_single_volume() || selection.is_single_modifier() || selection.requires_local_axes()) - { - Transform3d orient_matrix = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(true, false, true, true); - ::glMultMatrixd(orient_matrix.data()); - } - - switch (m_axis) - { - case X: - { - ::glRotatef(90.0f, 0.0f, 1.0f, 0.0f); - ::glRotatef(-90.0f, 0.0f, 0.0f, 1.0f); - break; - } - case Y: - { - ::glRotatef(-90.0f, 0.0f, 0.0f, 1.0f); - ::glRotatef(-90.0f, 0.0f, 1.0f, 0.0f); - break; - } - default: - case Z: - { - // no rotation - break; - } - } -} - -Vec3d GLGizmoRotate::mouse_position_in_local_plane(const Linef3& mouse_ray, const GLCanvas3D::Selection& selection) const -{ - double half_pi = 0.5 * (double)PI; - - Transform3d m = Transform3d::Identity(); - - switch (m_axis) - { - case X: - { - m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitZ())); - m.rotate(Eigen::AngleAxisd(-half_pi, Vec3d::UnitY())); - break; - } - case Y: - { - m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitY())); - m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitZ())); - break; - } - default: - case Z: - { - // no rotation applied - break; - } - } - - if (selection.is_single_volume() || selection.is_single_modifier() || selection.requires_local_axes()) - m = m * selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(true, false, true, true).inverse(); - - m.translate(-m_center); - - return transform(mouse_ray, m).intersect_plane(0.0); -} - -#if ENABLE_SVG_ICONS -GLGizmoRotate3D::GLGizmoRotate3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoRotate3D::GLGizmoRotate3D(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS -{ - m_gizmos.emplace_back(parent, GLGizmoRotate::X); - m_gizmos.emplace_back(parent, GLGizmoRotate::Y); - m_gizmos.emplace_back(parent, GLGizmoRotate::Z); - - for (unsigned int i = 0; i < 3; ++i) - { - m_gizmos[i].set_group_id(i); - } -} - -bool GLGizmoRotate3D::on_init() -{ - for (GLGizmoRotate& g : m_gizmos) - { - if (!g.init()) - return false; - } - - for (unsigned int i = 0; i < 3; ++i) - { - m_gizmos[i].set_highlight_color(AXES_COLOR[i]); - } - - m_shortcut_key = WXK_CONTROL_R; - - return true; -} - -std::string GLGizmoRotate3D::on_get_name() const -{ - return L("Rotate [R]"); -} - -void GLGizmoRotate3D::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if ((0 <= m_hover_id) && (m_hover_id < 3)) - m_gizmos[m_hover_id].start_dragging(selection); -} - -void GLGizmoRotate3D::on_stop_dragging() -{ - if ((0 <= m_hover_id) && (m_hover_id < 3)) - m_gizmos[m_hover_id].stop_dragging(); -} - -void GLGizmoRotate3D::on_render(const GLCanvas3D::Selection& selection) const -{ - ::glClear(GL_DEPTH_BUFFER_BIT); - - if ((m_hover_id == -1) || (m_hover_id == 0)) - m_gizmos[X].render(selection); - - if ((m_hover_id == -1) || (m_hover_id == 1)) - m_gizmos[Y].render(selection); - - if ((m_hover_id == -1) || (m_hover_id == 2)) - m_gizmos[Z].render(selection); -} - -#if ENABLE_IMGUI -void GLGizmoRotate3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) -{ -#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI - Vec3d rotation(Geometry::rad2deg(m_gizmos[0].get_angle()), Geometry::rad2deg(m_gizmos[1].get_angle()), Geometry::rad2deg(m_gizmos[2].get_angle())); - wxString label = _(L("Rotation (deg)")); - - m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); - m_imgui->set_next_window_bg_alpha(0.5f); - m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); - m_imgui->input_vec3("", rotation, 100.0f, "%.2f"); - m_imgui->end(); -#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI -} -#endif // ENABLE_IMGUI - -const float GLGizmoScale3D::Offset = 5.0f; - -#if ENABLE_SVG_ICONS -GLGizmoScale3D::GLGizmoScale3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoScale3D::GLGizmoScale3D(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS - , m_scale(Vec3d::Ones()) - , m_snap_step(0.05) - , m_starting_scale(Vec3d::Ones()) -{ -} - -bool GLGizmoScale3D::on_init() -{ - for (int i = 0; i < 10; ++i) - { - m_grabbers.push_back(Grabber()); - } - - double half_pi = 0.5 * (double)PI; - - // x axis - m_grabbers[0].angles(1) = half_pi; - m_grabbers[1].angles(1) = half_pi; - - // y axis - m_grabbers[2].angles(0) = half_pi; - m_grabbers[3].angles(0) = half_pi; - - m_shortcut_key = WXK_CONTROL_S; - - return true; -} - -std::string GLGizmoScale3D::on_get_name() const -{ - return L("Scale [S]"); -} - -void GLGizmoScale3D::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) - { - m_starting_drag_position = m_grabbers[m_hover_id].center; - m_starting_box = selection.get_bounding_box(); - } -} - -void GLGizmoScale3D::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - if ((m_hover_id == 0) || (m_hover_id == 1)) - do_scale_x(data); - else if ((m_hover_id == 2) || (m_hover_id == 3)) - do_scale_y(data); - else if ((m_hover_id == 4) || (m_hover_id == 5)) - do_scale_z(data); - else if (m_hover_id >= 6) - do_scale_uniform(data); -} - -void GLGizmoScale3D::on_render(const GLCanvas3D::Selection& selection) const -{ - bool single_instance = selection.is_single_full_instance(); - bool single_volume = selection.is_single_modifier() || selection.is_single_volume(); - bool single_selection = single_instance || single_volume; - - Vec3f scale = 100.0f * Vec3f::Ones(); - if (single_instance) - scale = 100.0f * selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_scaling_factor().cast(); - else if (single_volume) - scale = 100.0f * selection.get_volume(*selection.get_volume_idxs().begin())->get_volume_scaling_factor().cast(); - - if ((single_selection && ((m_hover_id == 0) || (m_hover_id == 1))) || m_grabbers[0].dragging || m_grabbers[1].dragging) - set_tooltip("X: " + format(scale(0), 4) + "%"); - else if (!m_grabbers[0].dragging && !m_grabbers[1].dragging && ((m_hover_id == 0) || (m_hover_id == 1))) - set_tooltip("X"); - else if ((single_selection && ((m_hover_id == 2) || (m_hover_id == 3))) || m_grabbers[2].dragging || m_grabbers[3].dragging) - set_tooltip("Y: " + format(scale(1), 4) + "%"); - else if (!m_grabbers[2].dragging && !m_grabbers[3].dragging && ((m_hover_id == 2) || (m_hover_id == 3))) - set_tooltip("Y"); - else if ((single_selection && ((m_hover_id == 4) || (m_hover_id == 5))) || m_grabbers[4].dragging || m_grabbers[5].dragging) - set_tooltip("Z: " + format(scale(2), 4) + "%"); - else if (!m_grabbers[4].dragging && !m_grabbers[5].dragging && ((m_hover_id == 4) || (m_hover_id == 5))) - set_tooltip("Z"); - else if ((single_selection && ((m_hover_id == 6) || (m_hover_id == 7) || (m_hover_id == 8) || (m_hover_id == 9))) - || m_grabbers[6].dragging || m_grabbers[7].dragging || m_grabbers[8].dragging || m_grabbers[9].dragging) - { - std::string tooltip = "X: " + format(scale(0), 4) + "%\n"; - tooltip += "Y: " + format(scale(1), 4) + "%\n"; - tooltip += "Z: " + format(scale(2), 4) + "%"; - set_tooltip(tooltip); - } - else if (!m_grabbers[6].dragging && !m_grabbers[7].dragging && !m_grabbers[8].dragging && !m_grabbers[9].dragging && - ((m_hover_id == 6) || (m_hover_id == 7) || (m_hover_id == 8) || (m_hover_id == 9))) - set_tooltip("X/Y/Z"); - - ::glClear(GL_DEPTH_BUFFER_BIT); - ::glEnable(GL_DEPTH_TEST); - - BoundingBoxf3 box; - Transform3d transform = Transform3d::Identity(); - Vec3d angles = Vec3d::Zero(); - Transform3d offsets_transform = Transform3d::Identity(); - - Vec3d grabber_size = Vec3d::Zero(); - - if (single_instance) - { - // calculate bounding box in instance local reference system - const GLCanvas3D::Selection::IndicesList& idxs = selection.get_volume_idxs(); - for (unsigned int idx : idxs) - { - const GLVolume* vol = selection.get_volume(idx); - box.merge(vol->bounding_box.transformed(vol->get_volume_transformation().get_matrix())); - } - - // gets transform from first selected volume - const GLVolume* v = selection.get_volume(*idxs.begin()); - transform = v->get_instance_transformation().get_matrix(); - // gets angles from first selected volume - angles = v->get_instance_rotation(); - // consider rotation+mirror only components of the transform for offsets - offsets_transform = Geometry::assemble_transform(Vec3d::Zero(), angles, Vec3d::Ones(), v->get_instance_mirror()); - grabber_size = v->get_instance_transformation().get_matrix(true, true, false, true) * box.size(); - } - else if (single_volume) - { - const GLVolume* v = selection.get_volume(*selection.get_volume_idxs().begin()); - box = v->bounding_box; - transform = v->world_matrix(); - angles = Geometry::extract_euler_angles(transform); - // consider rotation+mirror only components of the transform for offsets - offsets_transform = Geometry::assemble_transform(Vec3d::Zero(), angles, Vec3d::Ones(), v->get_instance_mirror()); - grabber_size = v->get_volume_transformation().get_matrix(true, true, false, true) * box.size(); - } - else - { - box = selection.get_bounding_box(); - grabber_size = box.size(); - } - - m_box = box; - - const Vec3d& center = m_box.center(); - Vec3d offset_x = offsets_transform * Vec3d((double)Offset, 0.0, 0.0); - Vec3d offset_y = offsets_transform * Vec3d(0.0, (double)Offset, 0.0); - Vec3d offset_z = offsets_transform * Vec3d(0.0, 0.0, (double)Offset); - - // x axis - m_grabbers[0].center = transform * Vec3d(m_box.min(0), center(1), center(2)) - offset_x; - m_grabbers[1].center = transform * Vec3d(m_box.max(0), center(1), center(2)) + offset_x; - ::memcpy((void*)m_grabbers[0].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); - ::memcpy((void*)m_grabbers[1].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); - - // y axis - m_grabbers[2].center = transform * Vec3d(center(0), m_box.min(1), center(2)) - offset_y; - m_grabbers[3].center = transform * Vec3d(center(0), m_box.max(1), center(2)) + offset_y; - ::memcpy((void*)m_grabbers[2].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); - ::memcpy((void*)m_grabbers[3].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); - - // z axis - m_grabbers[4].center = transform * Vec3d(center(0), center(1), m_box.min(2)) - offset_z; - m_grabbers[5].center = transform * Vec3d(center(0), center(1), m_box.max(2)) + offset_z; - ::memcpy((void*)m_grabbers[4].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); - ::memcpy((void*)m_grabbers[5].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); - - // uniform - m_grabbers[6].center = transform * Vec3d(m_box.min(0), m_box.min(1), center(2)) - offset_x - offset_y; - m_grabbers[7].center = transform * Vec3d(m_box.max(0), m_box.min(1), center(2)) + offset_x - offset_y; - m_grabbers[8].center = transform * Vec3d(m_box.max(0), m_box.max(1), center(2)) + offset_x + offset_y; - m_grabbers[9].center = transform * Vec3d(m_box.min(0), m_box.max(1), center(2)) - offset_x + offset_y; - for (int i = 6; i < 10; ++i) - { - ::memcpy((void*)m_grabbers[i].color, (const void*)m_highlight_color, 3 * sizeof(float)); - } - - // sets grabbers orientation - for (int i = 0; i < 10; ++i) - { - m_grabbers[i].angles = angles; - } - - ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); - - float grabber_mean_size = (float)(grabber_size(0) + grabber_size(1) + grabber_size(2)) / 3.0f; - - if (m_hover_id == -1) - { - // draw connections - if (m_grabbers[0].enabled && m_grabbers[1].enabled) - { - ::glColor3fv(m_grabbers[0].color); - render_grabbers_connection(0, 1); - } - if (m_grabbers[2].enabled && m_grabbers[3].enabled) - { - ::glColor3fv(m_grabbers[2].color); - render_grabbers_connection(2, 3); - } - if (m_grabbers[4].enabled && m_grabbers[5].enabled) - { - ::glColor3fv(m_grabbers[4].color); - render_grabbers_connection(4, 5); - } - ::glColor3fv(m_base_color); - render_grabbers_connection(6, 7); - render_grabbers_connection(7, 8); - render_grabbers_connection(8, 9); - render_grabbers_connection(9, 6); - // draw grabbers - render_grabbers(grabber_mean_size); - } - else if ((m_hover_id == 0) || (m_hover_id == 1)) - { - // draw connection - ::glColor3fv(m_grabbers[0].color); - render_grabbers_connection(0, 1); - // draw grabbers - m_grabbers[0].render(true, grabber_mean_size); - m_grabbers[1].render(true, grabber_mean_size); - } - else if ((m_hover_id == 2) || (m_hover_id == 3)) - { - // draw connection - ::glColor3fv(m_grabbers[2].color); - render_grabbers_connection(2, 3); - // draw grabbers - m_grabbers[2].render(true, grabber_mean_size); - m_grabbers[3].render(true, grabber_mean_size); - } - else if ((m_hover_id == 4) || (m_hover_id == 5)) - { - // draw connection - ::glColor3fv(m_grabbers[4].color); - render_grabbers_connection(4, 5); - // draw grabbers - m_grabbers[4].render(true, grabber_mean_size); - m_grabbers[5].render(true, grabber_mean_size); - } - else if (m_hover_id >= 6) - { - // draw connection - ::glColor3fv(m_drag_color); - render_grabbers_connection(6, 7); - render_grabbers_connection(7, 8); - render_grabbers_connection(8, 9); - render_grabbers_connection(9, 6); - // draw grabbers - for (int i = 6; i < 10; ++i) - { - m_grabbers[i].render(true, grabber_mean_size); - } - } -} - -void GLGizmoScale3D::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glDisable(GL_DEPTH_TEST); - - render_grabbers_for_picking(selection.get_bounding_box()); -} - -#if ENABLE_IMGUI -void GLGizmoScale3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) -{ -#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI - bool single_instance = selection.is_single_full_instance(); - wxString label = _(L("Scale (%)")); - - m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); - m_imgui->set_next_window_bg_alpha(0.5f); - m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); - m_imgui->input_vec3("", m_scale * 100.f, 100.0f, "%.2f"); - m_imgui->end(); -#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI -} -#endif // ENABLE_IMGUI - -void GLGizmoScale3D::render_grabbers_connection(unsigned int id_1, unsigned int id_2) const -{ - unsigned int grabbers_count = (unsigned int)m_grabbers.size(); - if ((id_1 < grabbers_count) && (id_2 < grabbers_count)) - { - ::glBegin(GL_LINES); - ::glVertex3dv(m_grabbers[id_1].center.data()); - ::glVertex3dv(m_grabbers[id_2].center.data()); - ::glEnd(); - } -} - -void GLGizmoScale3D::do_scale_x(const UpdateData& data) -{ - double ratio = calc_ratio(data); - if (ratio > 0.0) - m_scale(0) = m_starting_scale(0) * ratio; -} - -void GLGizmoScale3D::do_scale_y(const UpdateData& data) -{ - double ratio = calc_ratio(data); - if (ratio > 0.0) - m_scale(1) = m_starting_scale(1) * ratio; -} - -void GLGizmoScale3D::do_scale_z(const UpdateData& data) -{ - double ratio = calc_ratio(data); - if (ratio > 0.0) - m_scale(2) = m_starting_scale(2) * ratio; -} - -void GLGizmoScale3D::do_scale_uniform(const UpdateData& data) -{ - double ratio = calc_ratio(data); - if (ratio > 0.0) - m_scale = m_starting_scale * ratio; -} - -double GLGizmoScale3D::calc_ratio(const UpdateData& data) const -{ - double ratio = 0.0; - - // vector from the center to the starting position - Vec3d starting_vec = m_starting_drag_position - m_starting_box.center(); - double len_starting_vec = starting_vec.norm(); - if (len_starting_vec != 0.0) - { - Vec3d mouse_dir = data.mouse_ray.unit_vector(); - // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position - // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form - // in our case plane normal and ray direction are the same (orthogonal view) - // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal - Vec3d inters = data.mouse_ray.a + (m_starting_drag_position - data.mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; - // vector from the starting position to the found intersection - Vec3d inters_vec = inters - m_starting_drag_position; - - // finds projection of the vector along the staring direction - double proj = inters_vec.dot(starting_vec.normalized()); - - ratio = (len_starting_vec + proj) / len_starting_vec; - } - - if (data.shift_down) - ratio = m_snap_step * (double)std::round(ratio / m_snap_step); - - return ratio; -} - -const double GLGizmoMove3D::Offset = 10.0; - -#if ENABLE_SVG_ICONS -GLGizmoMove3D::GLGizmoMove3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoMove3D::GLGizmoMove3D(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS - , m_displacement(Vec3d::Zero()) - , m_snap_step(1.0) - , m_starting_drag_position(Vec3d::Zero()) - , m_starting_box_center(Vec3d::Zero()) - , m_starting_box_bottom_center(Vec3d::Zero()) - , m_quadric(nullptr) -{ - m_quadric = ::gluNewQuadric(); - if (m_quadric != nullptr) - ::gluQuadricDrawStyle(m_quadric, GLU_FILL); -} - -GLGizmoMove3D::~GLGizmoMove3D() -{ - if (m_quadric != nullptr) - ::gluDeleteQuadric(m_quadric); -} - -bool GLGizmoMove3D::on_init() -{ - for (int i = 0; i < 3; ++i) - { - m_grabbers.push_back(Grabber()); - } - - m_shortcut_key = WXK_CONTROL_M; - - return true; -} - -std::string GLGizmoMove3D::on_get_name() const -{ - return L("Move [M]"); -} - -void GLGizmoMove3D::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) - { - m_displacement = Vec3d::Zero(); - const BoundingBoxf3& box = selection.get_bounding_box(); - m_starting_drag_position = m_grabbers[m_hover_id].center; - m_starting_box_center = box.center(); - m_starting_box_bottom_center = box.center(); - m_starting_box_bottom_center(2) = box.min(2); - } -} - -void GLGizmoMove3D::on_stop_dragging() -{ - m_displacement = Vec3d::Zero(); -} - -void GLGizmoMove3D::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - if (m_hover_id == 0) - m_displacement(0) = calc_projection(data); - else if (m_hover_id == 1) - m_displacement(1) = calc_projection(data); - else if (m_hover_id == 2) - m_displacement(2) = calc_projection(data); -} - -void GLGizmoMove3D::on_render(const GLCanvas3D::Selection& selection) const -{ - bool show_position = selection.is_single_full_instance(); - const Vec3d& position = selection.get_bounding_box().center(); - - if ((show_position && (m_hover_id == 0)) || m_grabbers[0].dragging) - set_tooltip("X: " + format(show_position ? position(0) : m_displacement(0), 2)); - else if (!m_grabbers[0].dragging && (m_hover_id == 0)) - set_tooltip("X"); - else if ((show_position && (m_hover_id == 1)) || m_grabbers[1].dragging) - set_tooltip("Y: " + format(show_position ? position(1) : m_displacement(1), 2)); - else if (!m_grabbers[1].dragging && (m_hover_id == 1)) - set_tooltip("Y"); - else if ((show_position && (m_hover_id == 2)) || m_grabbers[2].dragging) - set_tooltip("Z: " + format(show_position ? position(2) : m_displacement(2), 2)); - else if (!m_grabbers[2].dragging && (m_hover_id == 2)) - set_tooltip("Z"); - - ::glClear(GL_DEPTH_BUFFER_BIT); - ::glEnable(GL_DEPTH_TEST); - - const BoundingBoxf3& box = selection.get_bounding_box(); - const Vec3d& center = box.center(); - - // x axis - m_grabbers[0].center = Vec3d(box.max(0) + Offset, center(1), center(2)); - ::memcpy((void*)m_grabbers[0].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); - - // y axis - m_grabbers[1].center = Vec3d(center(0), box.max(1) + Offset, center(2)); - ::memcpy((void*)m_grabbers[1].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); - - // z axis - m_grabbers[2].center = Vec3d(center(0), center(1), box.max(2) + Offset); - ::memcpy((void*)m_grabbers[2].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); - - ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); - - if (m_hover_id == -1) - { - // draw axes - for (unsigned int i = 0; i < 3; ++i) - { - if (m_grabbers[i].enabled) - { - ::glColor3fv(AXES_COLOR[i]); - ::glBegin(GL_LINES); - ::glVertex3dv(center.data()); - ::glVertex3dv(m_grabbers[i].center.data()); - ::glEnd(); - } - } - - // draw grabbers - render_grabbers(box); - for (unsigned int i = 0; i < 3; ++i) - { - if (m_grabbers[i].enabled) - render_grabber_extension((Axis)i, box, false); - } - } - else - { - // draw axis - ::glColor3fv(AXES_COLOR[m_hover_id]); - ::glBegin(GL_LINES); - ::glVertex3dv(center.data()); - ::glVertex3dv(m_grabbers[m_hover_id].center.data()); - ::glEnd(); - - // draw grabber - m_grabbers[m_hover_id].render(true, box.max_size()); - render_grabber_extension((Axis)m_hover_id, box, false); - } -} - -void GLGizmoMove3D::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glDisable(GL_DEPTH_TEST); - - const BoundingBoxf3& box = selection.get_bounding_box(); - render_grabbers_for_picking(box); - render_grabber_extension(X, box, true); - render_grabber_extension(Y, box, true); - render_grabber_extension(Z, box, true); -} - -#if ENABLE_IMGUI -void GLGizmoMove3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) -{ -#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI - bool show_position = selection.is_single_full_instance(); - const Vec3d& position = selection.get_bounding_box().center(); - - Vec3d displacement = show_position ? position : m_displacement; - wxString label = show_position ? _(L("Position (mm)")) : _(L("Displacement (mm)")); - - m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); - m_imgui->set_next_window_bg_alpha(0.5f); - m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); - m_imgui->input_vec3("", displacement, 100.0f, "%.2f"); - - m_imgui->end(); -#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI -} -#endif // ENABLE_IMGUI - -double GLGizmoMove3D::calc_projection(const UpdateData& data) const -{ - double projection = 0.0; - - Vec3d starting_vec = m_starting_drag_position - m_starting_box_center; - double len_starting_vec = starting_vec.norm(); - if (len_starting_vec != 0.0) - { - Vec3d mouse_dir = data.mouse_ray.unit_vector(); - // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position - // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form - // in our case plane normal and ray direction are the same (orthogonal view) - // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal - Vec3d inters = data.mouse_ray.a + (m_starting_drag_position - data.mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; - // vector from the starting position to the found intersection - Vec3d inters_vec = inters - m_starting_drag_position; - - // finds projection of the vector along the staring direction - projection = inters_vec.dot(starting_vec.normalized()); - } - - if (data.shift_down) - projection = m_snap_step * (double)std::round(projection / m_snap_step); - - return projection; -} - -void GLGizmoMove3D::render_grabber_extension(Axis axis, const BoundingBoxf3& box, bool picking) const -{ - if (m_quadric == nullptr) - return; - - double size = m_dragging ? (double)m_grabbers[axis].get_dragging_half_size((float)box.max_size()) : (double)m_grabbers[axis].get_half_size((float)box.max_size()); - - float color[3]; - ::memcpy((void*)color, (const void*)m_grabbers[axis].color, 3 * sizeof(float)); - if (!picking && (m_hover_id != -1)) - { - color[0] = 1.0f - color[0]; - color[1] = 1.0f - color[1]; - color[2] = 1.0f - color[2]; - } - - if (!picking) - ::glEnable(GL_LIGHTING); - - ::glColor3fv(color); - ::glPushMatrix(); - ::glTranslated(m_grabbers[axis].center(0), m_grabbers[axis].center(1), m_grabbers[axis].center(2)); - if (axis == X) - ::glRotated(90.0, 0.0, 1.0, 0.0); - else if (axis == Y) - ::glRotated(-90.0, 1.0, 0.0, 0.0); - - ::glTranslated(0.0, 0.0, 2.0 * size); - ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); - ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); - ::gluQuadricOrientation(m_quadric, GLU_INSIDE); - ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); - ::glPopMatrix(); - - if (!picking) - ::glDisable(GL_LIGHTING); -} - -#if ENABLE_SVG_ICONS -GLGizmoFlatten::GLGizmoFlatten(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoFlatten::GLGizmoFlatten(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS - , m_normal(Vec3d::Zero()) - , m_starting_center(Vec3d::Zero()) -{ -} - -bool GLGizmoFlatten::on_init() -{ - m_shortcut_key = WXK_CONTROL_F; - return true; -} - -std::string GLGizmoFlatten::on_get_name() const -{ - return L("Place on face [F]"); -} - -bool GLGizmoFlatten::on_is_activable(const GLCanvas3D::Selection& selection) const -{ - return selection.is_single_full_instance(); -} - -void GLGizmoFlatten::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) - { - assert(m_planes_valid); - m_normal = m_planes[m_hover_id].normal; - m_starting_center = selection.get_bounding_box().center(); - } -} - -void GLGizmoFlatten::on_render(const GLCanvas3D::Selection& selection) const -{ - ::glClear(GL_DEPTH_BUFFER_BIT); - - ::glEnable(GL_DEPTH_TEST); - ::glEnable(GL_BLEND); - - if (selection.is_single_full_instance()) - { - const Transform3d& m = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(); - ::glPushMatrix(); - ::glTranslatef(0.f, 0.f, selection.get_volume(*selection.get_volume_idxs().begin())->get_sla_shift_z()); - ::glMultMatrixd(m.data()); - if (this->is_plane_update_necessary()) - const_cast(this)->update_planes(); - for (int i = 0; i < (int)m_planes.size(); ++i) - { - if (i == m_hover_id) - ::glColor4f(0.9f, 0.9f, 0.9f, 0.75f); - else - ::glColor4f(0.9f, 0.9f, 0.9f, 0.5f); - - ::glBegin(GL_POLYGON); - for (const Vec3d& vertex : m_planes[i].vertices) - { - ::glVertex3dv(vertex.data()); - } - ::glEnd(); - } - ::glPopMatrix(); - } - - ::glEnable(GL_CULL_FACE); - ::glDisable(GL_BLEND); -} - -void GLGizmoFlatten::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glDisable(GL_DEPTH_TEST); - ::glDisable(GL_BLEND); - - if (selection.is_single_full_instance()) - { - const Transform3d& m = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(); - ::glPushMatrix(); - ::glTranslatef(0.f, 0.f, selection.get_volume(*selection.get_volume_idxs().begin())->get_sla_shift_z()); - ::glMultMatrixd(m.data()); - if (this->is_plane_update_necessary()) - const_cast(this)->update_planes(); - for (int i = 0; i < (int)m_planes.size(); ++i) - { - ::glColor3f(1.0f, 1.0f, picking_color_component(i)); - ::glBegin(GL_POLYGON); - for (const Vec3d& vertex : m_planes[i].vertices) - { - ::glVertex3dv(vertex.data()); - } - ::glEnd(); - } - ::glPopMatrix(); - } - - ::glEnable(GL_CULL_FACE); -} - -void GLGizmoFlatten::set_flattening_data(const ModelObject* model_object) -{ - m_starting_center = Vec3d::Zero(); - if (m_model_object != model_object) { - m_planes.clear(); - m_planes_valid = false; - } - m_model_object = model_object; -} - -void GLGizmoFlatten::update_planes() -{ - TriangleMesh ch; - for (const ModelVolume* vol : m_model_object->volumes) - { - if (vol->type() != ModelVolumeType::MODEL_PART) - continue; - TriangleMesh vol_ch = vol->get_convex_hull(); - vol_ch.transform(vol->get_matrix()); - ch.merge(vol_ch); - } - ch = ch.convex_hull_3d(); - m_planes.clear(); - const Transform3d& inst_matrix = m_model_object->instances.front()->get_matrix(true); - - // Following constants are used for discarding too small polygons. - const float minimal_area = 5.f; // in square mm (world coordinates) - const float minimal_side = 1.f; // mm - - // Now we'll go through all the facets and append Points of facets sharing the same normal. - // This part is still performed in mesh coordinate system. - const int num_of_facets = ch.stl.stats.number_of_facets; - std::vector facet_queue(num_of_facets, 0); - std::vector facet_visited(num_of_facets, false); - int facet_queue_cnt = 0; - const stl_normal* normal_ptr = nullptr; - while (1) { - // Find next unvisited triangle: - int facet_idx = 0; - for (; facet_idx < num_of_facets; ++ facet_idx) - if (!facet_visited[facet_idx]) { - facet_queue[facet_queue_cnt ++] = facet_idx; - facet_visited[facet_idx] = true; - normal_ptr = &ch.stl.facet_start[facet_idx].normal; - m_planes.emplace_back(); - break; - } - if (facet_idx == num_of_facets) - break; // Everything was visited already - - while (facet_queue_cnt > 0) { - int facet_idx = facet_queue[-- facet_queue_cnt]; - const stl_normal& this_normal = ch.stl.facet_start[facet_idx].normal; - if (std::abs(this_normal(0) - (*normal_ptr)(0)) < 0.001 && std::abs(this_normal(1) - (*normal_ptr)(1)) < 0.001 && std::abs(this_normal(2) - (*normal_ptr)(2)) < 0.001) { - stl_vertex* first_vertex = ch.stl.facet_start[facet_idx].vertex; - for (int j=0; j<3; ++j) - m_planes.back().vertices.emplace_back((double)first_vertex[j](0), (double)first_vertex[j](1), (double)first_vertex[j](2)); - - facet_visited[facet_idx] = true; - for (int j = 0; j < 3; ++ j) { - int neighbor_idx = ch.stl.neighbors_start[facet_idx].neighbor[j]; - if (! facet_visited[neighbor_idx]) - facet_queue[facet_queue_cnt ++] = neighbor_idx; - } - } - } - m_planes.back().normal = normal_ptr->cast(); - - // Now we'll transform all the points into world coordinates, so that the areas, angles and distances - // make real sense. - m_planes.back().vertices = transform(m_planes.back().vertices, inst_matrix); - - // if this is a just a very small triangle, remove it to speed up further calculations (it would be rejected later anyway): - if (m_planes.back().vertices.size() == 3 && - ((m_planes.back().vertices[0] - m_planes.back().vertices[1]).norm() < minimal_side - || (m_planes.back().vertices[0] - m_planes.back().vertices[2]).norm() < minimal_side - || (m_planes.back().vertices[1] - m_planes.back().vertices[2]).norm() < minimal_side)) - m_planes.pop_back(); - } - - // Let's prepare transformation of the normal vector from mesh to instance coordinates. - Geometry::Transformation t(inst_matrix); - Vec3d scaling = t.get_scaling_factor(); - t.set_scaling_factor(Vec3d(1./scaling(0), 1./scaling(1), 1./scaling(2))); - - // Now we'll go through all the polygons, transform the points into xy plane to process them: - for (unsigned int polygon_id=0; polygon_id < m_planes.size(); ++polygon_id) { - Pointf3s& polygon = m_planes[polygon_id].vertices; - const Vec3d& normal = m_planes[polygon_id].normal; - - // transform the normal according to the instance matrix: - Vec3d normal_transformed = t.get_matrix() * normal; - - // We are going to rotate about z and y to flatten the plane - Eigen::Quaterniond q; - Transform3d m = Transform3d::Identity(); - m.matrix().block(0, 0, 3, 3) = q.setFromTwoVectors(normal_transformed, Vec3d::UnitZ()).toRotationMatrix(); - polygon = transform(polygon, m); - - // Now to remove the inner points. We'll misuse Geometry::convex_hull for that, but since - // it works in fixed point representation, we will rescale the polygon to avoid overflows. - // And yes, it is a nasty thing to do. Whoever has time is free to refactor. - Vec3d bb_size = BoundingBoxf3(polygon).size(); - float sf = std::min(1./bb_size(0), 1./bb_size(1)); - Transform3d tr = Geometry::assemble_transform(Vec3d::Zero(), Vec3d::Zero(), Vec3d(sf, sf, 1.f)); - polygon = transform(polygon, tr); - polygon = Slic3r::Geometry::convex_hull(polygon); - polygon = transform(polygon, tr.inverse()); - - // Calculate area of the polygons and discard ones that are too small - float& area = m_planes[polygon_id].area; - area = 0.f; - for (unsigned int i = 0; i < polygon.size(); i++) // Shoelace formula - area += polygon[i](0)*polygon[i + 1 < polygon.size() ? i + 1 : 0](1) - polygon[i + 1 < polygon.size() ? i + 1 : 0](0)*polygon[i](1); - area = 0.5f * std::abs(area); - - bool discard = false; - if (area < minimal_area) - discard = true; - else { - // We also check the inner angles and discard polygons with angles smaller than the following threshold - const double angle_threshold = ::cos(10.0 * (double)PI / 180.0); - - for (unsigned int i = 0; i < polygon.size(); ++i) { - const Vec3d& prec = polygon[(i == 0) ? polygon.size() - 1 : i - 1]; - const Vec3d& curr = polygon[i]; - const Vec3d& next = polygon[(i == polygon.size() - 1) ? 0 : i + 1]; - - if ((prec - curr).normalized().dot((next - curr).normalized()) > angle_threshold) { - discard = true; - break; - } - } - } - - if (discard) { - m_planes.erase(m_planes.begin() + (polygon_id--)); - continue; - } - - // We will shrink the polygon a little bit so it does not touch the object edges: - Vec3d centroid = std::accumulate(polygon.begin(), polygon.end(), Vec3d(0.0, 0.0, 0.0)); - centroid /= (double)polygon.size(); - for (auto& vertex : polygon) - vertex = 0.9f*vertex + 0.1f*centroid; - - // Polygon is now simple and convex, we'll round the corners to make them look nicer. - // The algorithm takes a vertex, calculates middles of respective sides and moves the vertex - // towards their average (controlled by 'aggressivity'). This is repeated k times. - // In next iterations, the neighbours are not always taken at the middle (to increase the - // rounding effect at the corners, where we need it most). - const unsigned int k = 10; // number of iterations - const float aggressivity = 0.2f; // agressivity - const unsigned int N = polygon.size(); - std::vector> neighbours; - if (k != 0) { - Pointf3s points_out(2*k*N); // vector long enough to store the future vertices - for (unsigned int j=0; jvolumes) { - m_volumes_matrices.push_back(vol->get_matrix()); - m_volumes_types.push_back(vol->type()); - } - m_first_instance_scale = m_model_object->instances.front()->get_scaling_factor(); - m_first_instance_mirror = m_model_object->instances.front()->get_mirror(); - - m_planes_valid = true; -} - - -bool GLGizmoFlatten::is_plane_update_necessary() const -{ - if (m_state != On || !m_model_object || m_model_object->instances.empty()) - return false; - - if (! m_planes_valid || m_model_object->volumes.size() != m_volumes_matrices.size()) - return true; - - // We want to recalculate when the scale changes - some planes could (dis)appear. - if (! m_model_object->instances.front()->get_scaling_factor().isApprox(m_first_instance_scale) - || ! m_model_object->instances.front()->get_mirror().isApprox(m_first_instance_mirror)) - return true; - - for (unsigned int i=0; i < m_model_object->volumes.size(); ++i) - if (! m_model_object->volumes[i]->get_matrix().isApprox(m_volumes_matrices[i]) - || m_model_object->volumes[i]->type() != m_volumes_types[i]) - return true; - - return false; -} - -Vec3d GLGizmoFlatten::get_flattening_normal() const -{ - Vec3d out = m_normal; - m_normal = Vec3d::Zero(); - m_starting_center = Vec3d::Zero(); - return out; -} - -#if ENABLE_SVG_ICONS -GLGizmoSlaSupports::GLGizmoSlaSupports(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoSlaSupports::GLGizmoSlaSupports(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS - , m_starting_center(Vec3d::Zero()), m_quadric(nullptr) -{ - m_quadric = ::gluNewQuadric(); - if (m_quadric != nullptr) - // using GLU_FILL does not work when the instance's transformation - // contains mirroring (normals are reverted) - ::gluQuadricDrawStyle(m_quadric, GLU_FILL); -} - -GLGizmoSlaSupports::~GLGizmoSlaSupports() -{ - if (m_quadric != nullptr) - ::gluDeleteQuadric(m_quadric); -} - -bool GLGizmoSlaSupports::on_init() -{ - m_shortcut_key = WXK_CONTROL_L; - return true; -} - -void GLGizmoSlaSupports::set_sla_support_data(ModelObject* model_object, const GLCanvas3D::Selection& selection) -{ - m_starting_center = Vec3d::Zero(); - m_old_model_object = m_model_object; - m_model_object = model_object; - if (selection.is_empty()) - m_old_instance_id = -1; - - m_active_instance = selection.get_instance_idx(); - - if (model_object && selection.is_from_single_instance()) - { - if (is_mesh_update_necessary()) - update_mesh(); - - if (m_model_object != m_old_model_object) - m_editing_mode = false; - - if (m_editing_mode_cache.empty() && m_model_object->sla_points_status != sla::PointsStatus::UserModified) - get_data_from_backend(); - - if (m_state == On) { - m_parent.toggle_model_objects_visibility(false); - m_parent.toggle_model_objects_visibility(true, m_model_object, m_active_instance); - } - } -} - -void GLGizmoSlaSupports::on_render(const GLCanvas3D::Selection& selection) const -{ - ::glEnable(GL_BLEND); - ::glEnable(GL_DEPTH_TEST); - - render_points(selection, false); - render_selection_rectangle(); - -#if !ENABLE_IMGUI - render_tooltip_texture(); -#endif // not ENABLE_IMGUI - - ::glDisable(GL_BLEND); -} - -void GLGizmoSlaSupports::render_selection_rectangle() const -{ - if (!m_selection_rectangle_active) - return; - - ::glLineWidth(1.5f); - float render_color[3] = {1.f, 0.f, 0.f}; - ::glColor3fv(render_color); - - ::glPushAttrib(GL_TRANSFORM_BIT); // remember current MatrixMode - - ::glMatrixMode(GL_MODELVIEW); // cache modelview matrix and set to identity - ::glPushMatrix(); - ::glLoadIdentity(); - - ::glMatrixMode(GL_PROJECTION); // cache projection matrix and set to identity - ::glPushMatrix(); - ::glLoadIdentity(); - - ::glOrtho(0.f, m_canvas_width, m_canvas_height, 0.f, -1.f, 1.f); // set projection matrix so that world coords = window coords - - // render the selection rectangle (window coordinates): - ::glPushAttrib(GL_ENABLE_BIT); - ::glLineStipple(4, 0xAAAA); - ::glEnable(GL_LINE_STIPPLE); - - ::glBegin(GL_LINE_LOOP); - ::glVertex3f((GLfloat)m_selection_rectangle_start_corner(0), (GLfloat)m_selection_rectangle_start_corner(1), (GLfloat)0.5f); - ::glVertex3f((GLfloat)m_selection_rectangle_end_corner(0), (GLfloat)m_selection_rectangle_start_corner(1), (GLfloat)0.5f); - ::glVertex3f((GLfloat)m_selection_rectangle_end_corner(0), (GLfloat)m_selection_rectangle_end_corner(1), (GLfloat)0.5f); - ::glVertex3f((GLfloat)m_selection_rectangle_start_corner(0), (GLfloat)m_selection_rectangle_end_corner(1), (GLfloat)0.5f); - ::glEnd(); - ::glPopAttrib(); - - ::glPopMatrix(); // restore former projection matrix - ::glMatrixMode(GL_MODELVIEW); - ::glPopMatrix(); // restore former modelview matrix - ::glPopAttrib(); // restore former MatrixMode -} - -void GLGizmoSlaSupports::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glEnable(GL_DEPTH_TEST); - - render_points(selection, true); -} - -void GLGizmoSlaSupports::render_points(const GLCanvas3D::Selection& selection, bool picking) const -{ - if (m_quadric == nullptr || !selection.is_from_single_instance()) - return; - - if (!picking) - ::glEnable(GL_LIGHTING); - - const GLVolume* vol = selection.get_volume(*selection.get_volume_idxs().begin()); - double z_shift = vol->get_sla_shift_z(); - const Transform3d& instance_scaling_matrix_inverse = vol->get_instance_transformation().get_matrix(true, true, false, true).inverse(); - const Transform3d& instance_matrix = vol->get_instance_transformation().get_matrix(); - - ::glPushMatrix(); - ::glTranslated(0.0, 0.0, z_shift); - ::glMultMatrixd(instance_matrix.data()); - - float render_color[3]; - for (int i = 0; i < (int)m_editing_mode_cache.size(); ++i) - { - const sla::SupportPoint& support_point = m_editing_mode_cache[i].first; - const bool& point_selected = m_editing_mode_cache[i].second; - - // First decide about the color of the point. - if (picking) { - render_color[0] = 1.0f; - render_color[1] = 1.0f; - render_color[2] = picking_color_component(i); - } - else { - if ((m_hover_id == i && m_editing_mode)) { // ignore hover state unless editing mode is active - render_color[0] = 0.f; - render_color[1] = 1.0f; - render_color[2] = 1.0f; - } - else { // neigher hover nor picking - bool supports_new_island = m_lock_unique_islands && m_editing_mode_cache[i].first.is_new_island; - if (m_editing_mode) { - render_color[0] = point_selected ? 1.0f : (supports_new_island ? 0.3f : 0.7f); - render_color[1] = point_selected ? 0.3f : (supports_new_island ? 0.3f : 0.7f); - render_color[2] = point_selected ? 0.3f : (supports_new_island ? 1.0f : 0.7f); - } - else - for (unsigned char i=0; i<3; ++i) render_color[i] = 0.5f; - } - } - ::glColor3fv(render_color); - float render_color_emissive[4] = { 0.5f * render_color[0], 0.5f * render_color[1], 0.5f * render_color[2], 1.f}; - ::glMaterialfv(GL_FRONT, GL_EMISSION, render_color_emissive); - - // Now render the sphere. Inverse matrix of the instance scaling is applied so that the - // sphere does not scale with the object. - ::glPushMatrix(); - ::glTranslated(support_point.pos(0), support_point.pos(1), support_point.pos(2)); - ::glMultMatrixd(instance_scaling_matrix_inverse.data()); - ::gluSphere(m_quadric, m_editing_mode_cache[i].first.head_front_radius * RenderPointScale, 64, 36); - ::glPopMatrix(); - } - - { - // Reset emissive component to zero (the default value) - float render_color_emissive[4] = { 0.f, 0.f, 0.f, 1.f }; - ::glMaterialfv(GL_FRONT, GL_EMISSION, render_color_emissive); - } - - if (!picking) - ::glDisable(GL_LIGHTING); - - ::glPopMatrix(); -} - -bool GLGizmoSlaSupports::is_mesh_update_necessary() const -{ - return (m_state == On) && (m_model_object != m_old_model_object) && (m_model_object != nullptr) && !m_model_object->instances.empty(); - - //if (m_state != On || !m_model_object || m_model_object->instances.empty() || ! m_instance_matrix.isApprox(m_source_data.matrix)) - // return false; -} - -void GLGizmoSlaSupports::update_mesh() -{ - Eigen::MatrixXf& V = m_V; - Eigen::MatrixXi& F = m_F; - // Composite mesh of all instances in the world coordinate system. - // This mesh does not account for the possible Z up SLA offset. - TriangleMesh mesh = m_model_object->raw_mesh(); - const stl_file& stl = mesh.stl; - V.resize(3 * stl.stats.number_of_facets, 3); - F.resize(stl.stats.number_of_facets, 3); - for (unsigned int i=0; ivertex[0](0); V(3*i+0, 1) = facet->vertex[0](1); V(3*i+0, 2) = facet->vertex[0](2); - V(3*i+1, 0) = facet->vertex[1](0); V(3*i+1, 1) = facet->vertex[1](1); V(3*i+1, 2) = facet->vertex[1](2); - V(3*i+2, 0) = facet->vertex[2](0); V(3*i+2, 1) = facet->vertex[2](1); V(3*i+2, 2) = facet->vertex[2](2); - F(i, 0) = 3*i+0; - F(i, 1) = 3*i+1; - F(i, 2) = 3*i+2; - } - - m_AABB = igl::AABB(); - m_AABB.init(m_V, m_F); - - // we'll now reload support points (selection might have changed): - editing_mode_reload_cache(); -} - -Vec3f GLGizmoSlaSupports::unproject_on_mesh(const Vec2d& mouse_pos) -{ - // if the gizmo doesn't have the V, F structures for igl, calculate them first: - if (m_V.size() == 0) - update_mesh(); - - Eigen::Matrix viewport; - ::glGetIntegerv(GL_VIEWPORT, viewport.data()); - Eigen::Matrix modelview_matrix; - ::glGetDoublev(GL_MODELVIEW_MATRIX, modelview_matrix.data()); - Eigen::Matrix projection_matrix; - ::glGetDoublev(GL_PROJECTION_MATRIX, projection_matrix.data()); - - Vec3d point1; - Vec3d point2; - ::gluUnProject(mouse_pos(0), viewport(3)-mouse_pos(1), 0.f, modelview_matrix.data(), projection_matrix.data(), viewport.data(), &point1(0), &point1(1), &point1(2)); - ::gluUnProject(mouse_pos(0), viewport(3)-mouse_pos(1), 1.f, modelview_matrix.data(), projection_matrix.data(), viewport.data(), &point2(0), &point2(1), &point2(2)); - - igl::Hit hit; - - const GLCanvas3D::Selection& selection = m_parent.get_selection(); - const GLVolume* volume = selection.get_volume(*selection.get_volume_idxs().begin()); - double z_offset = volume->get_sla_shift_z(); - - point1(2) -= z_offset; - point2(2) -= z_offset; - - Transform3d inv = volume->get_instance_transformation().get_matrix().inverse(); - - point1 = inv * point1; - point2 = inv * point2; - - if (!m_AABB.intersect_ray(m_V, m_F, point1.cast(), (point2-point1).cast(), hit)) - throw std::invalid_argument("unproject_on_mesh(): No intersection found."); - - int fid = hit.id; - Vec3f bc(1-hit.u-hit.v, hit.u, hit.v); - return bc(0) * m_V.row(m_F(fid, 0)) + bc(1) * m_V.row(m_F(fid, 1)) + bc(2)*m_V.row(m_F(fid, 2)); -} - -// Following function is called from GLCanvas3D to inform the gizmo about a mouse/keyboard event. -// The gizmo has an opportunity to react - if it does, it should return true so that the Canvas3D is -// aware that the event was reacted to and stops trying to make different sense of it. If the gizmo -// concludes that the event was not intended for it, it should return false. -bool GLGizmoSlaSupports::mouse_event(SLAGizmoEventType action, const Vec2d& mouse_position, bool shift_down) -{ - if (m_editing_mode) { - - // left down - show the selection rectangle: - if (action == SLAGizmoEventType::LeftDown && shift_down) { - if (m_hover_id == -1) { - m_selection_rectangle_active = true; - m_selection_rectangle_start_corner = mouse_position; - m_selection_rectangle_end_corner = mouse_position; - m_canvas_width = m_parent.get_canvas_size().get_width(); - m_canvas_height = m_parent.get_canvas_size().get_height(); - } - else - select_point(m_hover_id); - - return true; - } - - // dragging the selection rectangle: - if (action == SLAGizmoEventType::Dragging && m_selection_rectangle_active) { - m_selection_rectangle_end_corner = mouse_position; - return true; - } - - // mouse up without selection rectangle - place point on the mesh: - if (action == SLAGizmoEventType::LeftUp && !m_selection_rectangle_active && !shift_down) { - if (m_ignore_up_event) { - m_ignore_up_event = false; - return false; - } - - int instance_id = m_parent.get_selection().get_instance_idx(); - if (m_old_instance_id != instance_id) - { - bool something_selected = (m_old_instance_id != -1); - m_old_instance_id = instance_id; - if (something_selected) - return false; - } - if (instance_id == -1) - return false; - - // If there is some selection, don't add new point and deselect everything instead. - if (m_selection_empty) { - Vec3f new_pos; - try { - new_pos = unproject_on_mesh(mouse_position); // this can throw - we don't want to create a new point in that case - m_editing_mode_cache.emplace_back(std::make_pair(sla::SupportPoint(new_pos, m_new_point_head_diameter/2.f, false), false)); - m_unsaved_changes = true; - } - catch (...) { // not clicked on object - return true; // prevents deselection of the gizmo by GLCanvas3D - } - } - else - select_point(NoPoints); - - return true; - } - - // left up with selection rectangle - select points inside the rectangle: - if ((action == SLAGizmoEventType::LeftUp || action == SLAGizmoEventType::ShiftUp) - && m_selection_rectangle_active) { - if (action == SLAGizmoEventType::ShiftUp) - m_ignore_up_event = true; - const Transform3d& instance_matrix = m_model_object->instances[m_active_instance]->get_transformation().get_matrix(); - GLint viewport[4]; - ::glGetIntegerv(GL_VIEWPORT, viewport); - GLdouble modelview_matrix[16]; - ::glGetDoublev(GL_MODELVIEW_MATRIX, modelview_matrix); - GLdouble projection_matrix[16]; - ::glGetDoublev(GL_PROJECTION_MATRIX, projection_matrix); - - const GLCanvas3D::Selection& selection = m_parent.get_selection(); - const GLVolume* volume = selection.get_volume(*selection.get_volume_idxs().begin()); - double z_offset = volume->get_sla_shift_z(); - - // bounding box created from the rectangle corners - will take care of order of the corners - BoundingBox rectangle(Points{Point(m_selection_rectangle_start_corner.cast()), Point(m_selection_rectangle_end_corner.cast())}); - - const Transform3d& instance_matrix_no_translation = volume->get_instance_transformation().get_matrix(true); - // we'll recover current look direction from the modelview matrix (in world coords)... - Vec3f direction_to_camera(modelview_matrix[2], modelview_matrix[6], modelview_matrix[10]); - // ...and transform it to model coords. - direction_to_camera = (instance_matrix_no_translation.inverse().cast() * direction_to_camera).normalized().eval(); - - // Iterate over all points, check if they're in the rectangle and if so, check that they are not obscured by the mesh: - for (unsigned int i=0; i() * support_point.pos; - pos(2) += z_offset; - GLdouble out_x, out_y, out_z; - ::gluProject((GLdouble)pos(0), (GLdouble)pos(1), (GLdouble)pos(2), modelview_matrix, projection_matrix, viewport, &out_x, &out_y, &out_z); - out_y = m_canvas_height - out_y; - - if (rectangle.contains(Point(out_x, out_y))) { - bool is_obscured = false; - // Cast a ray in the direction of the camera and look for intersection with the mesh: - std::vector hits; - // Offset the start of the ray to the front of the ball + EPSILON to account for numerical inaccuracies. - if (m_AABB.intersect_ray(m_V, m_F, support_point.pos + direction_to_camera * (support_point.head_front_radius + EPSILON), direction_to_camera, hits)) - // FIXME: the intersection could in theory be behind the camera, but as of now we only have camera direction. - // Also, the threshold is in mesh coordinates, not in actual dimensions. - if (hits.size() > 1 || hits.front().t > 0.001f) - is_obscured = true; - - if (!is_obscured) - select_point(i); - } - } - m_selection_rectangle_active = false; - return true; - } - - if (action == SLAGizmoEventType::Delete) { - // delete key pressed - delete_selected_points(); - return true; - } - - if (action == SLAGizmoEventType::ApplyChanges) { - editing_mode_apply_changes(); - return true; - } - - if (action == SLAGizmoEventType::DiscardChanges) { - editing_mode_discard_changes(); - return true; - } - - if (action == SLAGizmoEventType::RightDown) { - if (m_hover_id != -1) { - select_point(NoPoints); - select_point(m_hover_id); - delete_selected_points(); - return true; - } - return false; - } - - if (action == SLAGizmoEventType::SelectAll) { - select_point(AllPoints); - return true; - } - } - - if (!m_editing_mode) { - if (action == SLAGizmoEventType::AutomaticGeneration) { - auto_generate(); - return true; - } - - if (action == SLAGizmoEventType::ManualEditing) { - switch_to_editing_mode(); - return true; - } - } - - return false; -} - -void GLGizmoSlaSupports::delete_selected_points(bool force) -{ - for (unsigned int idx=0; idxreslice_SLA_supports(*m_model_object); - } - - select_point(NoPoints); - - //m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); -} - -void GLGizmoSlaSupports::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - if (m_editing_mode && m_hover_id != -1 && data.mouse_pos && (!m_editing_mode_cache[m_hover_id].first.is_new_island || !m_lock_unique_islands)) { - Vec3f new_pos; - try { - new_pos = unproject_on_mesh(Vec2d((*data.mouse_pos)(0), (*data.mouse_pos)(1))); - } - catch (...) { return; } - m_editing_mode_cache[m_hover_id].first.pos = new_pos; - m_editing_mode_cache[m_hover_id].first.is_new_island = false; - m_unsaved_changes = true; - // Do not update immediately, wait until the mouse is released. - // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); - } -} - -#if !ENABLE_IMGUI -void GLGizmoSlaSupports::render_tooltip_texture() const { - if (m_tooltip_texture.get_id() == 0) - if (!m_tooltip_texture.load_from_file(resources_dir() + "/icons/sla_support_points_tooltip.png", false)) - return; - if (m_reset_texture.get_id() == 0) - if (!m_reset_texture.load_from_file(resources_dir() + "/icons/sla_support_points_reset.png", false)) - return; - - float zoom = m_parent.get_camera_zoom(); - float inv_zoom = (zoom != 0.0f) ? 1.0f / zoom : 0.0f; - float gap = 30.0f * inv_zoom; - - const Size& cnv_size = m_parent.get_canvas_size(); - float l = gap - cnv_size.get_width()/2.f * inv_zoom; - float r = l + (float)m_tooltip_texture.get_width() * inv_zoom; - float b = gap - cnv_size.get_height()/2.f * inv_zoom; - float t = b + (float)m_tooltip_texture.get_height() * inv_zoom; - - Rect reset_rect = m_parent.get_gizmo_reset_rect(m_parent, true); - - ::glDisable(GL_DEPTH_TEST); - ::glPushMatrix(); - ::glLoadIdentity(); - GLTexture::render_texture(m_tooltip_texture.get_id(), l, r, b, t); - GLTexture::render_texture(m_reset_texture.get_id(), reset_rect.get_left(), reset_rect.get_right(), reset_rect.get_bottom(), reset_rect.get_top()); - ::glPopMatrix(); - ::glEnable(GL_DEPTH_TEST); -} -#endif // not ENABLE_IMGUI - - -std::vector GLGizmoSlaSupports::get_config_options(const std::vector& keys) const -{ - std::vector out; - - if (!m_model_object) - return out; - - DynamicPrintConfig& object_cfg = m_model_object->config; - DynamicPrintConfig& print_cfg = wxGetApp().preset_bundle->sla_prints.get_edited_preset().config; - std::unique_ptr default_cfg = nullptr; - - for (const std::string& key : keys) { - if (object_cfg.has(key)) - out.push_back(object_cfg.option(key)); - else - if (print_cfg.has(key)) - out.push_back(print_cfg.option(key)); - else { // we must get it from defaults - if (default_cfg == nullptr) - default_cfg.reset(DynamicPrintConfig::new_from_defaults_keys(keys)); - out.push_back(default_cfg->option(key)); - } - } - - return out; -} - - - -#if ENABLE_IMGUI -void GLGizmoSlaSupports::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) -{ - if (!m_model_object) - return; - - bool first_run = true; // This is a hack to redraw the button when all points are removed, - // so it is not delayed until the background process finishes. -RENDER_AGAIN: - m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); - - const float scaling = m_imgui->get_style_scaling(); - const ImVec2 window_size(285.f * scaling, 260.f * scaling); - ImGui::SetNextWindowPos(ImVec2(x, y - std::max(0.f, y+window_size.y-bottom_limit) )); - ImGui::SetNextWindowSize(ImVec2(window_size)); - - m_imgui->set_next_window_bg_alpha(0.5f); - m_imgui->begin(on_get_name(), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); - - ImGui::PushItemWidth(100.0f); - - bool force_refresh = false; - bool remove_selected = false; - bool remove_all = false; - - if (m_editing_mode) { - m_imgui->text(_(L("Left mouse click - add point"))); - m_imgui->text(_(L("Right mouse click - remove point"))); - m_imgui->text(_(L("Shift + Left (+ drag) - select point(s)"))); - m_imgui->text(" "); // vertical gap - - static const std::vector options = {0.2f, 0.4f, 0.6f, 0.8f, 1.0f}; - static const std::vector options_str = {"0.2", "0.4", "0.6", "0.8", "1.0"}; - int selection = -1; - for (size_t i = 0; i < options.size(); i++) { - if (options[i] == m_new_point_head_diameter) { selection = (int)i; } - } - - bool old_combo_state = m_combo_box_open; - // The combo is commented out for now, until the feature is supported by backend. - // m_combo_box_open = m_imgui->combo(_(L("Head diameter")), options_str, selection); - force_refresh |= (old_combo_state != m_combo_box_open); - - // float current_number = atof(str); - const float current_number = selection < options.size() ? options[selection] : m_new_point_head_diameter; - if (old_combo_state && !m_combo_box_open) // closing the combo must always change the sizes (even if the selection did not change) - for (auto& point_and_selection : m_editing_mode_cache) - if (point_and_selection.second) { - point_and_selection.first.head_front_radius = current_number / 2.f; - m_unsaved_changes = true; - } - - if (std::abs(current_number - m_new_point_head_diameter) > 0.001) { - force_refresh = true; - m_new_point_head_diameter = current_number; - } - - bool changed = m_lock_unique_islands; - m_imgui->checkbox(_(L("Lock supports under new islands")), m_lock_unique_islands); - force_refresh |= changed != m_lock_unique_islands; - - m_imgui->disabled_begin(m_selection_empty); - remove_selected = m_imgui->button(_(L("Remove selected points"))); - m_imgui->disabled_end(); - - m_imgui->disabled_begin(m_editing_mode_cache.empty()); - remove_all = m_imgui->button(_(L("Remove all points"))); - m_imgui->disabled_end(); - - m_imgui->text(" "); // vertical gap - - if (m_imgui->button(_(L("Apply changes")))) { - editing_mode_apply_changes(); - force_refresh = true; - } - ImGui::SameLine(); - bool discard_changes = m_imgui->button(_(L("Discard changes"))); - if (discard_changes) { - editing_mode_discard_changes(); - force_refresh = true; - } - } - else { // not in editing mode: - ImGui::PushItemWidth(100.0f); - m_imgui->text(_(L("Minimal points distance: "))); - ImGui::SameLine(); - - std::vector opts = get_config_options({"support_points_density_relative", "support_points_minimal_distance"}); - float density = static_cast(opts[0])->value; - float minimal_point_distance = static_cast(opts[1])->value; - - bool value_changed = ImGui::SliderFloat("", &minimal_point_distance, 0.f, 20.f, "%.f mm"); - if (value_changed) - m_model_object->config.opt("support_points_minimal_distance", true)->value = minimal_point_distance; - - m_imgui->text(_(L("Support points density: "))); - ImGui::SameLine(); - if (ImGui::SliderFloat(" ", &density, 0.f, 200.f, "%.f %%")) { - value_changed = true; - m_model_object->config.opt("support_points_density_relative", true)->value = (int)density; - } - - if (value_changed) { // Update side panel - wxTheApp->CallAfter([]() { - wxGetApp().obj_settings()->UpdateAndShow(true); - wxGetApp().obj_list()->update_settings_items(); - }); - } - - bool generate = m_imgui->button(_(L("Auto-generate points [A]"))); - - if (generate) - auto_generate(); - - m_imgui->text(""); - if (m_imgui->button(_(L("Manual editing [M]")))) - switch_to_editing_mode(); - - m_imgui->disabled_begin(m_editing_mode_cache.empty()); - remove_all = m_imgui->button(_(L("Remove all points"))); - m_imgui->disabled_end(); - - m_imgui->text(""); - - m_imgui->text(m_model_object->sla_points_status == sla::PointsStatus::None ? "No points (will be autogenerated)" : - (m_model_object->sla_points_status == sla::PointsStatus::AutoGenerated ? "Autogenerated points (no modifications)" : - (m_model_object->sla_points_status == sla::PointsStatus::UserModified ? "User-modified points" : - (m_model_object->sla_points_status == sla::PointsStatus::Generating ? "Generation in progress..." : "UNKNOWN STATUS")))); - } - - m_imgui->end(); - - if (m_editing_mode != m_old_editing_state) { // user toggled between editing/non-editing mode - m_parent.toggle_sla_auxiliaries_visibility(!m_editing_mode); - force_refresh = true; - } - m_old_editing_state = m_editing_mode; - - if (remove_selected || remove_all) { - force_refresh = false; - m_parent.set_as_dirty(); - if (remove_all) - select_point(AllPoints); - delete_selected_points(remove_all); - if (remove_all && !m_editing_mode) - editing_mode_apply_changes(); - if (first_run) { - first_run = false; - goto RENDER_AGAIN; - } - } - - if (force_refresh) - m_parent.set_as_dirty(); -} -#endif // ENABLE_IMGUI - -bool GLGizmoSlaSupports::on_is_activable(const GLCanvas3D::Selection& selection) const -{ - if (wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() != ptSLA - || !selection.is_from_single_instance()) - return false; - - // Check that none of the selected volumes is outside. - const GLCanvas3D::Selection::IndicesList& list = selection.get_volume_idxs(); - for (const auto& idx : list) - if (selection.get_volume(idx)->is_outside) - return false; - - return true; -} - -bool GLGizmoSlaSupports::on_is_selectable() const -{ - return (wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() == ptSLA); -} - -std::string GLGizmoSlaSupports::on_get_name() const -{ - return L("SLA Support Points [L]"); -} - -void GLGizmoSlaSupports::on_set_state() -{ - if (m_state == On) { - if (is_mesh_update_necessary()) - update_mesh(); - - m_parent.toggle_model_objects_visibility(false); - if (m_model_object) - m_parent.toggle_model_objects_visibility(true, m_model_object, m_active_instance); - } - if (m_state == Off) { - if (m_old_state != Off) { // the gizmo was just turned Off - - if (m_model_object) { - if (m_unsaved_changes) { - wxMessageDialog dlg(GUI::wxGetApp().plater(), _(L("Do you want to save your manually edited support points ?\n")), - _(L("Save changes?")), wxICON_QUESTION | wxYES | wxNO); - if (dlg.ShowModal() == wxID_YES) - editing_mode_apply_changes(); - else - editing_mode_discard_changes(); - } - } - - m_parent.toggle_model_objects_visibility(true); - m_editing_mode = false; // so it is not active next time the gizmo opens - m_editing_mode_cache.clear(); - } - } - m_old_state = m_state; -} - - - -void GLGizmoSlaSupports::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) { - select_point(NoPoints); - select_point(m_hover_id); - } -} - - - -void GLGizmoSlaSupports::select_point(int i) -{ - if (i == AllPoints || i == NoPoints) { - for (auto& point_and_selection : m_editing_mode_cache) - point_and_selection.second = ( i == AllPoints ); - m_selection_empty = (i == NoPoints); - } - else { - m_editing_mode_cache[i].second = true; - m_selection_empty = false; - } -} - - - -void GLGizmoSlaSupports::editing_mode_discard_changes() -{ - m_editing_mode_cache.clear(); - for (const sla::SupportPoint& point : m_model_object->sla_support_points) - m_editing_mode_cache.push_back(std::make_pair(point, false)); - m_editing_mode = false; - m_unsaved_changes = false; -} - - - -void GLGizmoSlaSupports::editing_mode_apply_changes() -{ - // If there are no changes, don't touch the front-end. The data in the cache could have been - // taken from the backend and copying them to ModelObject would needlessly invalidate them. - if (m_unsaved_changes) { - m_model_object->sla_points_status = sla::PointsStatus::UserModified; - m_model_object->sla_support_points.clear(); - for (const std::pair& point_and_selection : m_editing_mode_cache) - m_model_object->sla_support_points.push_back(point_and_selection.first); - - // Recalculate support structures once the editing mode is left. - // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); - // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); - wxGetApp().plater()->reslice_SLA_supports(*m_model_object); - } - m_editing_mode = false; - m_unsaved_changes = false; -} - - - -void GLGizmoSlaSupports::editing_mode_reload_cache() -{ - m_editing_mode_cache.clear(); - for (const sla::SupportPoint& point : m_model_object->sla_support_points) - m_editing_mode_cache.push_back(std::make_pair(point, false)); - - m_unsaved_changes = false; -} - - - -void GLGizmoSlaSupports::get_data_from_backend() -{ - for (const SLAPrintObject* po : m_parent.sla_print()->objects()) { - if (po->model_object()->id() == m_model_object->id() && po->is_step_done(slaposSupportPoints)) { - m_editing_mode_cache.clear(); - const std::vector& points = po->get_support_points(); - auto mat = po->trafo().inverse().cast(); - for (unsigned int i=0; isla_points_status != sla::PointsStatus::UserModified) - m_model_object->sla_points_status = sla::PointsStatus::AutoGenerated; - - break; - } - } - m_unsaved_changes = false; - - // We don't copy the data into ModelObject, as this would stop the background processing. -} - - - -void GLGizmoSlaSupports::auto_generate() -{ - wxMessageDialog dlg(GUI::wxGetApp().plater(), _(L( - "Autogeneration will erase all manually edited points.\n\n" - "Are you sure you want to do it?\n" - )), _(L("Warning")), wxICON_WARNING | wxYES | wxNO); - - if (m_model_object->sla_points_status != sla::PointsStatus::UserModified || m_editing_mode_cache.empty() || dlg.ShowModal() == wxID_YES) { - m_model_object->sla_support_points.clear(); - m_model_object->sla_points_status = sla::PointsStatus::Generating; - m_editing_mode_cache.clear(); - wxGetApp().plater()->reslice_SLA_supports(*m_model_object); - } -} - - - -void GLGizmoSlaSupports::switch_to_editing_mode() -{ - if (m_model_object->sla_points_status != sla::PointsStatus::AutoGenerated) - editing_mode_reload_cache(); - m_unsaved_changes = false; - m_editing_mode = true; -} - - - - - - -// GLGizmoCut - -class GLGizmoCutPanel : public wxPanel -{ -public: - GLGizmoCutPanel(wxWindow *parent); - - void display(bool display); -private: - bool m_active; - wxCheckBox *m_cb_rotate; - wxButton *m_btn_cut; - wxButton *m_btn_cancel; -}; - -GLGizmoCutPanel::GLGizmoCutPanel(wxWindow *parent) - : wxPanel(parent) - , m_active(false) - , m_cb_rotate(new wxCheckBox(this, wxID_ANY, _(L("Rotate lower part upwards")))) - , m_btn_cut(new wxButton(this, wxID_OK, _(L("Perform cut")))) - , m_btn_cancel(new wxButton(this, wxID_CANCEL, _(L("Cancel")))) -{ - enum { MARGIN = 5 }; - - auto *sizer = new wxBoxSizer(wxHORIZONTAL); - - auto *label = new wxStaticText(this, wxID_ANY, _(L("Cut object:"))); - sizer->Add(label, 0, wxALL | wxALIGN_CENTER, MARGIN); - sizer->Add(m_cb_rotate, 0, wxALL | wxALIGN_CENTER, MARGIN); - sizer->AddStretchSpacer(); - sizer->Add(m_btn_cut, 0, wxALL | wxALIGN_CENTER, MARGIN); - sizer->Add(m_btn_cancel, 0, wxALL | wxALIGN_CENTER, MARGIN); - - SetSizer(sizer); -} - -void GLGizmoCutPanel::display(bool display) -{ - Show(display); - GetParent()->Layout(); -} - - -const double GLGizmoCut::Offset = 10.0; -const double GLGizmoCut::Margin = 20.0; -const std::array GLGizmoCut::GrabberColor = { 1.0, 0.5, 0.0 }; - -#if ENABLE_SVG_ICONS -GLGizmoCut::GLGizmoCut(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) - : GLGizmoBase(parent, icon_filename, sprite_id) -#else -GLGizmoCut::GLGizmoCut(GLCanvas3D& parent, unsigned int sprite_id) - : GLGizmoBase(parent, sprite_id) -#endif // ENABLE_SVG_ICONS - , m_cut_z(0.0) - , m_max_z(0.0) -#if !ENABLE_IMGUI - , m_panel(nullptr) -#endif // not ENABLE_IMGUI - , m_keep_upper(true) - , m_keep_lower(true) - , m_rotate_lower(false) -{} - -#if !ENABLE_IMGUI -void GLGizmoCut::create_external_gizmo_widgets(wxWindow *parent) -{ - wxASSERT(m_panel == nullptr); - - m_panel = new GLGizmoCutPanel(parent); - parent->GetSizer()->Add(m_panel, 0, wxEXPAND); - - parent->Layout(); - parent->Fit(); - auto prev_heigh = parent->GetMinSize().GetHeight(); - parent->SetMinSize(wxSize(-1, std::max(prev_heigh, m_panel->GetSize().GetHeight()))); - - m_panel->Hide(); - m_panel->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { - perform_cut(m_parent.get_selection()); - }, wxID_OK); -} -#endif // not ENABLE_IMGUI - -bool GLGizmoCut::on_init() -{ - m_grabbers.emplace_back(); - m_shortcut_key = WXK_CONTROL_C; - return true; -} - -std::string GLGizmoCut::on_get_name() const -{ - return L("Cut [C]"); -} - -void GLGizmoCut::on_set_state() -{ - // Reset m_cut_z on gizmo activation - if (get_state() == On) { - m_cut_z = m_parent.get_selection().get_bounding_box().size()(2) / 2.0; - } - -#if !ENABLE_IMGUI - // Display or hide the extra panel - if (m_panel != nullptr) { - m_panel->display(get_state() == On); - } -#endif // not ENABLE_IMGUI -} - -bool GLGizmoCut::on_is_activable(const GLCanvas3D::Selection& selection) const -{ - return selection.is_single_full_instance() && !selection.is_wipe_tower(); -} - -void GLGizmoCut::on_start_dragging(const GLCanvas3D::Selection& selection) -{ - if (m_hover_id == -1) { return; } - - const BoundingBoxf3& box = selection.get_bounding_box(); - m_start_z = m_cut_z; - update_max_z(selection); - m_drag_pos = m_grabbers[m_hover_id].center; - m_drag_center = box.center(); - m_drag_center(2) = m_cut_z; -} - -void GLGizmoCut::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) -{ - if (m_hover_id != -1) { - set_cut_z(m_start_z + calc_projection(data.mouse_ray)); - } -} - -void GLGizmoCut::on_render(const GLCanvas3D::Selection& selection) const -{ - if (m_grabbers[0].dragging) { - set_tooltip("Z: " + format(m_cut_z, 2)); - } - - update_max_z(selection); - - const BoundingBoxf3& box = selection.get_bounding_box(); - Vec3d plane_center = box.center(); - plane_center(2) = m_cut_z; - - const float min_x = box.min(0) - Margin; - const float max_x = box.max(0) + Margin; - const float min_y = box.min(1) - Margin; - const float max_y = box.max(1) + Margin; - ::glEnable(GL_DEPTH_TEST); - ::glDisable(GL_CULL_FACE); - ::glEnable(GL_BLEND); - ::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); - - // Draw the cutting plane - ::glBegin(GL_QUADS); - ::glColor4f(0.8f, 0.8f, 0.8f, 0.5f); - ::glVertex3f(min_x, min_y, plane_center(2)); - ::glVertex3f(max_x, min_y, plane_center(2)); - ::glVertex3f(max_x, max_y, plane_center(2)); - ::glVertex3f(min_x, max_y, plane_center(2)); - ::glEnd(); - - ::glEnable(GL_CULL_FACE); - ::glDisable(GL_BLEND); - - // TODO: draw cut part contour? - - // Draw the grabber and the connecting line - m_grabbers[0].center = plane_center; - m_grabbers[0].center(2) = plane_center(2) + Offset; - - ::glDisable(GL_DEPTH_TEST); - ::glLineWidth(m_hover_id != -1 ? 2.0f : 1.5f); - ::glColor3f(1.0, 1.0, 0.0); - ::glBegin(GL_LINES); - ::glVertex3dv(plane_center.data()); - ::glVertex3dv(m_grabbers[0].center.data()); - ::glEnd(); - - std::copy(std::begin(GrabberColor), std::end(GrabberColor), m_grabbers[0].color); - m_grabbers[0].render(m_hover_id == 0, box.max_size()); -} - -void GLGizmoCut::on_render_for_picking(const GLCanvas3D::Selection& selection) const -{ - ::glDisable(GL_DEPTH_TEST); - - render_grabbers_for_picking(selection.get_bounding_box()); -} - -#if ENABLE_IMGUI -void GLGizmoCut::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) -{ - m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); - m_imgui->set_next_window_bg_alpha(0.5f); - m_imgui->begin(_(L("Cut")), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); - - ImGui::PushItemWidth(100.0f); - bool _value_changed = ImGui::InputDouble("Z", &m_cut_z, 0.0f, 0.0f, "%.2f"); - - m_imgui->checkbox(_(L("Keep upper part")), m_keep_upper); - m_imgui->checkbox(_(L("Keep lower part")), m_keep_lower); - m_imgui->checkbox(_(L("Rotate lower part upwards")), m_rotate_lower); - - m_imgui->disabled_begin(!m_keep_upper && !m_keep_lower); - const bool cut_clicked = m_imgui->button(_(L("Perform cut"))); - m_imgui->disabled_end(); - - m_imgui->end(); - - if (cut_clicked && (m_keep_upper || m_keep_lower)) { - perform_cut(selection); - } -} -#endif // ENABLE_IMGUI - -void GLGizmoCut::update_max_z(const GLCanvas3D::Selection& selection) const -{ - m_max_z = selection.get_bounding_box().size()(2); - set_cut_z(m_cut_z); -} - -void GLGizmoCut::set_cut_z(double cut_z) const -{ - // Clamp the plane to the object's bounding box - m_cut_z = std::max(0.0, std::min(m_max_z, cut_z)); -} - -void GLGizmoCut::perform_cut(const GLCanvas3D::Selection& selection) -{ - const auto instance_idx = selection.get_instance_idx(); - const auto object_idx = selection.get_object_idx(); - - wxCHECK_RET(instance_idx >= 0 && object_idx >= 0, "GLGizmoCut: Invalid object selection"); - - wxGetApp().plater()->cut(object_idx, instance_idx, m_cut_z, m_keep_upper, m_keep_lower, m_rotate_lower); -} - -double GLGizmoCut::calc_projection(const Linef3& mouse_ray) const -{ - double projection = 0.0; - - const Vec3d starting_vec = m_drag_pos - m_drag_center; - const double len_starting_vec = starting_vec.norm(); - if (len_starting_vec != 0.0) - { - Vec3d mouse_dir = mouse_ray.unit_vector(); - // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position - // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form - // in our case plane normal and ray direction are the same (orthogonal view) - // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal - Vec3d inters = mouse_ray.a + (m_drag_pos - mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; - // vector from the starting position to the found intersection - Vec3d inters_vec = inters - m_drag_pos; - - // finds projection of the vector along the staring direction - projection = inters_vec.dot(starting_vec.normalized()); - } - return projection; -} - - -} // namespace GUI -} // namespace Slic3r diff --git a/src/slic3r/GUI/GLGizmo.hpp b/src/slic3r/GUI/GLGizmo.hpp deleted file mode 100644 index fc8d40a65..000000000 --- a/src/slic3r/GUI/GLGizmo.hpp +++ /dev/null @@ -1,629 +0,0 @@ -#ifndef slic3r_GLGizmo_hpp_ -#define slic3r_GLGizmo_hpp_ - -#include - -#include "../../slic3r/GUI/GLTexture.hpp" -#include "../../slic3r/GUI/GLCanvas3D.hpp" - -#include "libslic3r/Point.hpp" -#include "libslic3r/BoundingBox.hpp" -#include "libslic3r/SLA/SLAAutoSupports.hpp" - -#include -#include -#include - - -class wxWindow; -class GLUquadric; -typedef class GLUquadric GLUquadricObj; - - -namespace Slic3r { - -class BoundingBoxf3; -class Linef3; -class ModelObject; - -namespace GUI { - -class GLCanvas3D; -#if ENABLE_IMGUI -class ImGuiWrapper; -#endif // ENABLE_IMGUI - -class GLGizmoBase -{ -protected: - struct Grabber - { - static const float SizeFactor; - static const float MinHalfSize; - static const float DraggingScaleFactor; - - Vec3d center; - Vec3d angles; - float color[3]; - bool enabled; - bool dragging; - - Grabber(); - - void render(bool hover, float size) const; - void render_for_picking(float size) const { render(size, color, false); } - - float get_half_size(float size) const; - float get_dragging_half_size(float size) const; - - private: - void render(float size, const float* render_color, bool use_lighting) const; - void render_face(float half_size) const; - }; - -public: - enum EState - { - Off, - Hover, - On, - Num_States - }; - - struct UpdateData - { - const Linef3 mouse_ray; - const Point* mouse_pos; - bool shift_down; - - UpdateData(const Linef3& mouse_ray, const Point* mouse_pos = nullptr, bool shift_down = false) - : mouse_ray(mouse_ray), mouse_pos(mouse_pos), shift_down(shift_down) - {} - }; - -protected: - GLCanvas3D& m_parent; - - int m_group_id; - EState m_state; - int m_shortcut_key; -#if ENABLE_SVG_ICONS - std::string m_icon_filename; -#endif // ENABLE_SVG_ICONS - unsigned int m_sprite_id; - int m_hover_id; - bool m_dragging; - float m_base_color[3]; - float m_drag_color[3]; - float m_highlight_color[3]; - mutable std::vector m_grabbers; -#if ENABLE_IMGUI - ImGuiWrapper* m_imgui; -#endif // ENABLE_IMGUI - -public: -#if ENABLE_SVG_ICONS - GLGizmoBase(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoBase(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - virtual ~GLGizmoBase() {} - - bool init() { return on_init(); } - - std::string get_name() const { return on_get_name(); } - - int get_group_id() const { return m_group_id; } - void set_group_id(int id) { m_group_id = id; } - - EState get_state() const { return m_state; } - void set_state(EState state) { m_state = state; on_set_state(); } - - int get_shortcut_key() const { return m_shortcut_key; } - void set_shortcut_key(int key) { m_shortcut_key = key; } - -#if ENABLE_SVG_ICONS - const std::string& get_icon_filename() const { return m_icon_filename; } -#endif // ENABLE_SVG_ICONS - - bool is_activable(const GLCanvas3D::Selection& selection) const { return on_is_activable(selection); } - bool is_selectable() const { return on_is_selectable(); } - - unsigned int get_sprite_id() const { return m_sprite_id; } - - int get_hover_id() const { return m_hover_id; } - void set_hover_id(int id); - - void set_highlight_color(const float* color); - - void enable_grabber(unsigned int id); - void disable_grabber(unsigned int id); - - void start_dragging(const GLCanvas3D::Selection& selection); - void stop_dragging(); - bool is_dragging() const { return m_dragging; } - - void update(const UpdateData& data, const GLCanvas3D::Selection& selection); - - void render(const GLCanvas3D::Selection& selection) const { on_render(selection); } - void render_for_picking(const GLCanvas3D::Selection& selection) const { on_render_for_picking(selection); } - -#if !ENABLE_IMGUI - virtual void create_external_gizmo_widgets(wxWindow *parent); -#endif // not ENABLE_IMGUI - -#if ENABLE_IMGUI - void render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) { on_render_input_window(x, y, bottom_limit, selection); } -#endif // ENABLE_IMGUI - -protected: - virtual bool on_init() = 0; - virtual std::string on_get_name() const = 0; - virtual void on_set_state() {} - virtual void on_set_hover_id() {} - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return true; } - virtual bool on_is_selectable() const { return true; } - virtual void on_enable_grabber(unsigned int id) {} - virtual void on_disable_grabber(unsigned int id) {} - virtual void on_start_dragging(const GLCanvas3D::Selection& selection) {} - virtual void on_stop_dragging() {} - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) = 0; - virtual void on_render(const GLCanvas3D::Selection& selection) const = 0; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const = 0; - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) {} -#endif // ENABLE_IMGUI - - float picking_color_component(unsigned int id) const; - void render_grabbers(const BoundingBoxf3& box) const; - void render_grabbers(float size) const; - void render_grabbers_for_picking(const BoundingBoxf3& box) const; - - void set_tooltip(const std::string& tooltip) const; - std::string format(float value, unsigned int decimals) const; -}; - -class GLGizmoRotate : public GLGizmoBase -{ - static const float Offset; - static const unsigned int CircleResolution; - static const unsigned int AngleResolution; - static const unsigned int ScaleStepsCount; - static const float ScaleStepRad; - static const unsigned int ScaleLongEvery; - static const float ScaleLongTooth; - static const unsigned int SnapRegionsCount; - static const float GrabberOffset; - -public: - enum Axis : unsigned char - { - X, - Y, - Z - }; - -private: - Axis m_axis; - double m_angle; - - GLUquadricObj* m_quadric; - - mutable Vec3d m_center; - mutable float m_radius; - - mutable float m_snap_coarse_in_radius; - mutable float m_snap_coarse_out_radius; - mutable float m_snap_fine_in_radius; - mutable float m_snap_fine_out_radius; - -public: - GLGizmoRotate(GLCanvas3D& parent, Axis axis); - GLGizmoRotate(const GLGizmoRotate& other); - virtual ~GLGizmoRotate(); - - double get_angle() const { return m_angle; } - void set_angle(double angle); - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const { return ""; } - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - -private: - void render_circle() const; - void render_scale() const; - void render_snap_radii() const; - void render_reference_radius() const; - void render_angle() const; - void render_grabber(const BoundingBoxf3& box) const; - void render_grabber_extension(const BoundingBoxf3& box, bool picking) const; - - void transform_to_local(const GLCanvas3D::Selection& selection) const; - // returns the intersection of the mouse ray with the plane perpendicular to the gizmo axis, in local coordinate - Vec3d mouse_position_in_local_plane(const Linef3& mouse_ray, const GLCanvas3D::Selection& selection) const; -}; - -class GLGizmoRotate3D : public GLGizmoBase -{ - std::vector m_gizmos; - -public: -#if ENABLE_SVG_ICONS - GLGizmoRotate3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoRotate3D(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - - Vec3d get_rotation() const { return Vec3d(m_gizmos[X].get_angle(), m_gizmos[Y].get_angle(), m_gizmos[Z].get_angle()); } - void set_rotation(const Vec3d& rotation) { m_gizmos[X].set_angle(rotation(0)); m_gizmos[Y].set_angle(rotation(1)); m_gizmos[Z].set_angle(rotation(2)); } - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const; - virtual void on_set_state() - { - for (GLGizmoRotate& g : m_gizmos) - { - g.set_state(m_state); - } - } - virtual void on_set_hover_id() - { - for (unsigned int i = 0; i < 3; ++i) - { - m_gizmos[i].set_hover_id((m_hover_id == i) ? 0 : -1); - } - } - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return !selection.is_wipe_tower(); } - virtual void on_enable_grabber(unsigned int id) - { - if ((0 <= id) && (id < 3)) - m_gizmos[id].enable_grabber(0); - } - virtual void on_disable_grabber(unsigned int id) - { - if ((0 <= id) && (id < 3)) - m_gizmos[id].disable_grabber(0); - } - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_stop_dragging(); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) - { - for (GLGizmoRotate& g : m_gizmos) - { - g.update(data, selection); - } - } - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const - { - for (const GLGizmoRotate& g : m_gizmos) - { - g.render_for_picking(selection); - } - } - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); -#endif // ENABLE_IMGUI -}; - -class GLGizmoScale3D : public GLGizmoBase -{ - static const float Offset; - - mutable BoundingBoxf3 m_box; - - Vec3d m_scale; - - double m_snap_step; - - Vec3d m_starting_scale; - Vec3d m_starting_drag_position; - BoundingBoxf3 m_starting_box; - -public: -#if ENABLE_SVG_ICONS - GLGizmoScale3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoScale3D(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - - double get_snap_step(double step) const { return m_snap_step; } - void set_snap_step(double step) { m_snap_step = step; } - - const Vec3d& get_scale() const { return m_scale; } - void set_scale(const Vec3d& scale) { m_starting_scale = scale; m_scale = scale; } - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const; - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return !selection.is_wipe_tower(); } - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); -#endif // ENABLE_IMGUI - -private: - void render_grabbers_connection(unsigned int id_1, unsigned int id_2) const; - - void do_scale_x(const UpdateData& data); - void do_scale_y(const UpdateData& data); - void do_scale_z(const UpdateData& data); - void do_scale_uniform(const UpdateData& data); - - double calc_ratio(const UpdateData& data) const; -}; - -class GLGizmoMove3D : public GLGizmoBase -{ - static const double Offset; - - Vec3d m_displacement; - - double m_snap_step; - - Vec3d m_starting_drag_position; - Vec3d m_starting_box_center; - Vec3d m_starting_box_bottom_center; - - GLUquadricObj* m_quadric; - -public: -#if ENABLE_SVG_ICONS - GLGizmoMove3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoMove3D(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - virtual ~GLGizmoMove3D(); - - double get_snap_step(double step) const { return m_snap_step; } - void set_snap_step(double step) { m_snap_step = step; } - - const Vec3d& get_displacement() const { return m_displacement; } - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const; - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_stop_dragging(); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); -#endif // ENABLE_IMGUI - -private: - double calc_projection(const UpdateData& data) const; - void render_grabber_extension(Axis axis, const BoundingBoxf3& box, bool picking) const; -}; - -class GLGizmoFlatten : public GLGizmoBase -{ -// This gizmo does not use grabbers. The m_hover_id relates to polygon managed by the class itself. - -private: - mutable Vec3d m_normal; - - struct PlaneData { - std::vector vertices; - Vec3d normal; - float area; - }; - - // This holds information to decide whether recalculation is necessary: - std::vector m_volumes_matrices; - std::vector m_volumes_types; - Vec3d m_first_instance_scale; - Vec3d m_first_instance_mirror; - - std::vector m_planes; - bool m_planes_valid = false; - mutable Vec3d m_starting_center; - const ModelObject* m_model_object = nullptr; - std::vector instances_matrices; - - void update_planes(); - bool is_plane_update_necessary() const; - -public: -#if ENABLE_SVG_ICONS - GLGizmoFlatten(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoFlatten(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - - void set_flattening_data(const ModelObject* model_object); - Vec3d get_flattening_normal() const; - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const; - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) {} - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - virtual void on_set_state() - { - if (m_state == On && is_plane_update_necessary()) - update_planes(); - } -}; - -#define SLAGIZMO_IMGUI_MODAL 0 - -class GLGizmoSlaSupports : public GLGizmoBase -{ -private: - ModelObject* m_model_object = nullptr; - ModelObject* m_old_model_object = nullptr; - int m_active_instance = -1; - int m_old_instance_id = -1; - Vec3f unproject_on_mesh(const Vec2d& mouse_pos); - - const float RenderPointScale = 1.f; - - GLUquadricObj* m_quadric; - Eigen::MatrixXf m_V; // vertices - Eigen::MatrixXi m_F; // facets indices - igl::AABB m_AABB; - - struct SourceDataSummary { - Geometry::Transformation transformation; - }; - - // This holds information to decide whether recalculation is necessary: - SourceDataSummary m_source_data; - - mutable Vec3d m_starting_center; - -public: -#if ENABLE_SVG_ICONS - GLGizmoSlaSupports(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoSlaSupports(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - virtual ~GLGizmoSlaSupports(); - void set_sla_support_data(ModelObject* model_object, const GLCanvas3D::Selection& selection); - bool mouse_event(SLAGizmoEventType action, const Vec2d& mouse_position, bool shift_down); - void delete_selected_points(bool force = false); - -private: - bool on_init(); - void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - - void render_selection_rectangle() const; - void render_points(const GLCanvas3D::Selection& selection, bool picking = false) const; - bool is_mesh_update_necessary() const; - void update_mesh(); - -#if !ENABLE_IMGUI - void render_tooltip_texture() const; - mutable GLTexture m_tooltip_texture; - mutable GLTexture m_reset_texture; -#endif // not ENABLE_IMGUI - - bool m_lock_unique_islands = false; - bool m_editing_mode = false; // Is editing mode active? - bool m_old_editing_state = false; // To keep track of whether the user toggled between the modes (needed for imgui refreshes). - float m_new_point_head_diameter = 0.4f; // Size of a new point. - float m_minimal_point_distance = 20.f; - float m_density = 100.f; - std::vector> m_editing_mode_cache; // a support point and whether it is currently selected - - bool m_selection_rectangle_active = false; - Vec2d m_selection_rectangle_start_corner; - Vec2d m_selection_rectangle_end_corner; - bool m_ignore_up_event = false; - bool m_combo_box_open = false; // To ensure proper rendering of the imgui combobox. - bool m_unsaved_changes = false; // Are there unsaved changes in manual mode? - bool m_selection_empty = true; - EState m_old_state = Off; // to be able to see that the gizmo has just been closed (see on_set_state) - int m_canvas_width; - int m_canvas_height; - - std::vector get_config_options(const std::vector& keys) const; - - // Methods that do the model_object and editing cache synchronization, - // editing mode selection, etc: - enum { - AllPoints = -2, - NoPoints, - }; - void select_point(int i); - void editing_mode_apply_changes(); - void editing_mode_discard_changes(); - void editing_mode_reload_cache(); - void get_data_from_backend(); - void auto_generate(); - void switch_to_editing_mode(); - -protected: - void on_set_state() override; - void on_start_dragging(const GLCanvas3D::Selection& selection) override; - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) override; -#endif // ENABLE_IMGUI - - virtual std::string on_get_name() const; - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; - virtual bool on_is_selectable() const; -}; - - -#if !ENABLE_IMGUI -class GLGizmoCutPanel; -#endif // not ENABLE_IMGUI - -class GLGizmoCut : public GLGizmoBase -{ - static const double Offset; - static const double Margin; - static const std::array GrabberColor; - - mutable double m_cut_z; - double m_start_z; - mutable double m_max_z; - Vec3d m_drag_pos; - Vec3d m_drag_center; - bool m_keep_upper; - bool m_keep_lower; - bool m_rotate_lower; -#if !ENABLE_IMGUI - GLGizmoCutPanel *m_panel; -#endif // not ENABLE_IMGUI - -public: -#if ENABLE_SVG_ICONS - GLGizmoCut(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); -#else - GLGizmoCut(GLCanvas3D& parent, unsigned int sprite_id); -#endif // ENABLE_SVG_ICONS - -#if !ENABLE_IMGUI - virtual void create_external_gizmo_widgets(wxWindow *parent); -#endif // not ENABLE_IMGUI -#if !ENABLE_IMGUI -#endif // not ENABLE_IMGUI - -protected: - virtual bool on_init(); - virtual std::string on_get_name() const; - virtual void on_set_state(); - virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; - virtual void on_start_dragging(const GLCanvas3D::Selection& selection); - virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); - virtual void on_render(const GLCanvas3D::Selection& selection) const; - virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; - -#if ENABLE_IMGUI - virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); -#endif // ENABLE_IMGUI -private: - void update_max_z(const GLCanvas3D::Selection& selection) const; - void set_cut_z(double cut_z) const; - void perform_cut(const GLCanvas3D::Selection& selection); - double calc_projection(const Linef3& mouse_ray) const; -}; - - -} // namespace GUI -} // namespace Slic3r - -#endif // slic3r_GLGizmo_hpp_ - diff --git a/src/slic3r/GUI/GLTexture.hpp b/src/slic3r/GUI/GLTexture.hpp index 017255647..e00b3a3be 100644 --- a/src/slic3r/GUI/GLTexture.hpp +++ b/src/slic3r/GUI/GLTexture.hpp @@ -2,6 +2,7 @@ #define slic3r_GLTexture_hpp_ #include +#include class wxImage; diff --git a/src/slic3r/GUI/GUI.cpp b/src/slic3r/GUI/GUI.cpp index 11e94f2ca..4a3ccc356 100644 --- a/src/slic3r/GUI/GUI.cpp +++ b/src/slic3r/GUI/GUI.cpp @@ -148,9 +148,6 @@ void config_wizard(int reason) _(L("Please check and fix your object list.")), _(L("Attention!"))); } - - // Load the currently selected preset into the GUI, update the preset selection box. - // wxGetApp().load_current_presets(); // #ys_FIXME_to_delete presets are loaded now in select_preset function } // opt_index = 0, by the reason of zero-index in ConfigOptionVector by default (in case only one element) diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp index b61457226..bd553eaa4 100644 --- a/src/slic3r/GUI/GUI_App.cpp +++ b/src/slic3r/GUI/GUI_App.cpp @@ -17,6 +17,7 @@ #include #include #include +#include #include "libslic3r/Utils.hpp" #include "libslic3r/Model.hpp" @@ -79,9 +80,7 @@ IMPLEMENT_APP(GUI_App) GUI_App::GUI_App() : wxApp() , m_em_unit(10) -#if ENABLE_IMGUI , m_imgui(new ImGuiWrapper()) -#endif // ENABLE_IMGUI {} bool GUI_App::OnInit() @@ -90,14 +89,17 @@ bool GUI_App::OnInit() const wxString resources_dir = from_u8(Slic3r::resources_dir()); wxCHECK_MSG(wxDirExists(resources_dir), false, wxString::Format("Resources path does not exist or is not a directory: %s", resources_dir)); - -#if ENABLE_IMGUI wxCHECK_MSG(m_imgui->init(), false, "Failed to initialize ImGui"); -#endif // ENABLE_IMGUI - SetAppName("Slic3rPE-alpha"); + SetAppName("Slic3rPE-beta"); SetAppDisplayName("Slic3r Prusa Edition"); +// Enable this to get the default Win32 COMCTRL32 behavior of static boxes. +// wxSystemOptions::SetOption("msw.staticbox.optimized-paint", 0); +// Enable this to disable Windows Vista themes for all wxNotebooks. The themes seem to lead to terrible +// performance when working on high resolution multi-display setups. +// wxSystemOptions::SetOption("msw.notebook.themed-background", 0); + // Slic3r::debugf "wxWidgets version %s, Wx version %s\n", wxVERSION_STRING, wxVERSION; // Set the Slic3r data directory at the Slic3r XS module. @@ -161,22 +163,13 @@ bool GUI_App::OnInit() Bind(wxEVT_IDLE, [this](wxIdleEvent& event) { + if (! plater_) + return; + if (app_config->dirty() && app_config->get("autosave") == "1") app_config->save(); - // ! Temporary workaround for the correct behavior of the Scrolled sidebar panel - // Do this "manipulations" only once ( after (re)create of the application ) - if (plater_ && sidebar().obj_list()->GetMinHeight() > 15 * wxGetApp().em_unit()) - { - wxWindowUpdateLocker noUpdates_sidebar(&sidebar()); - sidebar().obj_list()->SetMinSize(wxSize(-1, 15 * wxGetApp().em_unit())); - - // !!! to correct later layouts - update_mode(); // update view mode after fix of the object_list size - } - - if (this->plater() != nullptr) - this->obj_manipul()->update_if_dirty(); + this->obj_manipul()->update_if_dirty(); // Preset updating & Configwizard are done after the above initializations, // and after MainFrame is created & shown. @@ -203,12 +196,13 @@ bool GUI_App::OnInit() } preset_updater->sync(preset_bundle); }); - - load_current_presets(); } }); + load_current_presets(); + mainframe->Show(true); + update_mode(); // update view mode after fix of the object_list size m_initialized = true; return true; } @@ -259,6 +253,7 @@ void GUI_App::init_fonts() { m_small_font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT); m_bold_font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT).Bold(); + m_normal_font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT); #ifdef __WXMAC__ m_small_font.SetPointSize(11); @@ -532,20 +527,7 @@ void GUI_App::save_mode(const /*ConfigOptionMode*/int mode) // Update view mode according to selected menu void GUI_App::update_mode() { - wxWindowUpdateLocker noUpdates(&sidebar()); - - const ConfigOptionMode mode = wxGetApp().get_mode(); - - obj_list()->get_sizer()->Show(mode > comSimple); - sidebar().set_mode_value(mode); -// sidebar().show_buttons(mode == comExpert); - obj_list()->unselect_objects(); - obj_list()->update_selections(); - obj_list()->update_object_menu(); - - sidebar().update_mode_sizer(mode); - - sidebar().Layout(); + sidebar().update_mode(); for (auto tab : tabs_list) tab->update_visibility(); diff --git a/src/slic3r/GUI/GUI_App.hpp b/src/slic3r/GUI/GUI_App.hpp index 4c23e3eb7..e10a7b95e 100644 --- a/src/slic3r/GUI/GUI_App.hpp +++ b/src/slic3r/GUI/GUI_App.hpp @@ -5,9 +5,7 @@ #include #include "libslic3r/PrintConfig.hpp" #include "MainFrame.hpp" -#if ENABLE_IMGUI #include "ImGuiWrapper.hpp" -#endif // ENABLE_IMGUI #include #include @@ -80,16 +78,14 @@ class GUI_App : public wxApp wxFont m_small_font; wxFont m_bold_font; + wxFont m_normal_font; size_t m_em_unit; // width of a "m"-symbol in pixels for current system font // Note: for 100% Scale m_em_unit = 10 -> it's a good enough coefficient for a size setting of controls wxLocale* m_wxLocale{ nullptr }; -#if ENABLE_IMGUI std::unique_ptr m_imgui; -#endif // ENABLE_IMGUI - std::unique_ptr m_printhost_job_queue; public: @@ -111,6 +107,7 @@ public: const wxFont& small_font() { return m_small_font; } const wxFont& bold_font() { return m_bold_font; } + const wxFont& normal_font() { return m_normal_font; } size_t em_unit() const { return m_em_unit; } void set_em_unit(const size_t em_unit) { m_em_unit = em_unit; } @@ -166,9 +163,7 @@ public: std::vector tabs_list; -#if ENABLE_IMGUI ImGuiWrapper* imgui() { return m_imgui.get(); } -#endif // ENABLE_IMGUI PrintHostJobQueue& printhost_job_queue() { return *m_printhost_job_queue.get(); } diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp index eb3744bef..abfc067ff 100644 --- a/src/slic3r/GUI/GUI_ObjectList.cpp +++ b/src/slic3r/GUI/GUI_ObjectList.cpp @@ -43,6 +43,18 @@ static PrinterTechnology printer_technology() return wxGetApp().preset_bundle->printers.get_selected_preset().printer_technology(); } +// Config from current edited printer preset +static DynamicPrintConfig& printer_config() +{ + return wxGetApp().preset_bundle->printers.get_edited_preset().config; +} + +static int extruders_count() +{ + return printer_technology() == ptSLA ? 1 : + printer_config().option("nozzle_diameter")->values.size(); +} + ObjectList::ObjectList(wxWindow* parent) : wxDataViewCtrl(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxDV_MULTIPLE), m_parent(parent) @@ -115,10 +127,7 @@ ObjectList::~ObjectList() void ObjectList::create_objects_ctrl() { - // temporary workaround for the correct behavior of the Scrolled sidebar panel: - // 1. set a height of the list to some big value - // 2. change it to the normal min value (200) after first whole App updating/layouting - SetMinSize(wxSize(-1, 3000)); // #ys_FIXME + SetMinSize(wxSize(-1, 15 * wxGetApp().em_unit())); m_sizer = new wxBoxSizer(wxVERTICAL); m_sizer->Add(this, 1, wxGROW); @@ -430,11 +439,12 @@ void ObjectList::OnContextMenu(wxDataViewEvent&) else if (title == _("Name") && pt.x >15 && m_objects_model->GetBitmap(item).GetRefData() == m_bmp_manifold_warning.GetRefData()) { - if (is_windows10()) { - const auto obj_idx = m_objects_model->GetIdByItem(m_objects_model->GetTopParent(item)); - wxGetApp().plater()->fix_through_netfabb(obj_idx); - } + if (is_windows10()) + fix_through_netfabb(); } + else if (title == _("Extruder")) + show_extruder_selection_menu(); + #ifndef __WXMSW__ GetMainWindow()->SetToolTip(""); // hide tooltip #endif //__WXMSW__ @@ -442,9 +452,13 @@ void ObjectList::OnContextMenu(wxDataViewEvent&) void ObjectList::show_context_menu() { - if (multiple_selection() && selected_instances_of_same_object()) + if (multiple_selection()) { - wxGetApp().plater()->PopupMenu(&m_menu_instance); + if (selected_instances_of_same_object()) + wxGetApp().plater()->PopupMenu(&m_menu_instance); + else + show_extruder_selection_menu(); + return; } @@ -649,8 +663,7 @@ void ObjectList::get_options_menu(settings_menu_hierarchy& settings_menu, const { auto options = get_options(is_part); - auto extruders_cnt = printer_technology() == ptSLA ? 1 : - wxGetApp().preset_bundle->printers.get_edited_preset().config.option("nozzle_diameter")->values.size(); + const int extruders_cnt = extruders_count(); DynamicPrintConfig config; for (auto& option : options) @@ -660,9 +673,7 @@ void ObjectList::get_options_menu(settings_menu_hierarchy& settings_menu, const if (category.empty() || (category == "Extruders" && extruders_cnt == 1)) continue; - const std::string& label = opt->label.empty() ? opt->full_label : - opt->full_label.empty() ? opt->label : - opt->full_label + " " + opt->label;; + const std::string& label = !opt->full_label.empty() ? opt->full_label : opt->label; std::pair option_label(option, label); std::vector< std::pair > new_category; auto& cat_opt_label = settings_menu.find(category) == settings_menu.end() ? new_category : settings_menu.at(category); @@ -1086,8 +1097,7 @@ void ObjectList::create_freq_settings_popupmenu(wxMenu *menu) const FreqSettingsBundle& bundle = printer_technology() == ptFFF ? FREQ_SETTINGS_BUNDLE_FFF : FREQ_SETTINGS_BUNDLE_SLA; - auto extruders_cnt = printer_technology() == ptSLA ? 1 : - wxGetApp().preset_bundle->printers.get_edited_preset().config.option("nozzle_diameter")->values.size(); + const int extruders_cnt = extruders_count(); for (auto& it : bundle) { if (it.first.empty() || it.first == "Extruders" && extruders_cnt == 1) @@ -1284,7 +1294,7 @@ void ObjectList::load_generic_subobject(const std::string& type_name, const Mode const wxString name = _(L("Generic")) + "-" + _(type_name); TriangleMesh mesh; - auto& bed_shape = wxGetApp().preset_bundle->printers.get_edited_preset().config.option("bed_shape")->values; + auto& bed_shape = printer_config().option("bed_shape")->values; const auto& sz = BoundingBoxf(bed_shape).size(); const auto side = 0.1 * std::max(sz(0), sz(1)); @@ -1412,12 +1422,14 @@ bool ObjectList::del_subobject_from_object(const int obj_idx, const int idx, con // Cannot delete a wipe tower. return false; + ModelObject* object = (*m_objects)[obj_idx]; + if (type == itVolume) { - const auto volume = (*m_objects)[obj_idx]->volumes[idx]; + const auto volume = object->volumes[idx]; // if user is deleting the last solid part, throw error int solid_cnt = 0; - for (auto vol : (*m_objects)[obj_idx]->volumes) + for (auto vol : object->volumes) if (vol->is_model_part()) ++solid_cnt; if (volume->is_model_part() && solid_cnt == 1) { @@ -1425,14 +1437,23 @@ bool ObjectList::del_subobject_from_object(const int obj_idx, const int idx, con return false; } - (*m_objects)[obj_idx]->delete_volume(idx); + object->delete_volume(idx); + + if (object->volumes.size() == 1) + { + const auto last_volume = object->volumes[0]; + if (!last_volume->config.empty()) { + object->config.apply(last_volume->config); + last_volume->config.clear(); + } + } } else if (type == itInstance) { - if ((*m_objects)[obj_idx]->instances.size() == 1) { + if (object->instances.size() == 1) { Slic3r::GUI::show_error(nullptr, _(L("You can't delete the last intance from object."))); return false; } - (*m_objects)[obj_idx]->delete_instance(idx); + object->delete_instance(idx); } else return false; @@ -1452,7 +1473,7 @@ void ObjectList::split() ModelVolume* volume; if (!get_volume_by_item(item, volume)) return; - DynamicPrintConfig& config = wxGetApp().preset_bundle->printers.get_edited_preset().config; + DynamicPrintConfig& config = printer_config(); const ConfigOption *nozzle_dmtrs_opt = config.option("nozzle_diameter", false); const auto nozzle_dmrs_cnt = (nozzle_dmtrs_opt == nullptr) ? size_t(1) : dynamic_cast(nozzle_dmtrs_opt)->values.size(); if (volume->split(nozzle_dmrs_cnt) == 1) { @@ -1522,12 +1543,7 @@ bool ObjectList::is_splittable() if (!get_volume_by_item(item, volume) || !volume) return false; - int splittable = volume->is_splittable(); - if (splittable == -1) { - splittable = (int)volume->mesh.has_multiple_patches(); - volume->set_splittable(splittable); - } - return splittable != 0; + return volume->is_splittable(); } bool ObjectList::selected_instances_of_same_object() @@ -1762,6 +1778,12 @@ void ObjectList::delete_from_model_and_list(const std::vector& it if (item->type&itVolume) { m_objects_model->Delete(m_objects_model->GetItemByVolumeId(item->obj_idx, item->sub_obj_idx)); + if ((*m_objects)[item->obj_idx]->volumes.size() == 1 && + (*m_objects)[item->obj_idx]->config.has("extruder")) + { + const wxString extruder = wxString::Format("%d", (*m_objects)[item->obj_idx]->config.option("extruder")->value); + m_objects_model->SetValue(extruder, m_objects_model->GetItemById(item->obj_idx), 1); + } wxGetApp().plater()->canvas3D()->ensure_on_bed(item->obj_idx); } else @@ -2000,6 +2022,8 @@ void ObjectList::update_selections_on_canvas() void ObjectList::select_item(const wxDataViewItem& item) { + if (! item.IsOk()) { return; } + m_prevent_list_events = true; UnselectAll(); @@ -2280,13 +2304,37 @@ void ObjectList::fix_through_netfabb() const if (!item) return; - ItemType type = m_objects_model->GetItemType(item); + const ItemType type = m_objects_model->GetItemType(item); + + const int obj_idx = type & itObject ? m_objects_model->GetIdByItem(item) : + type & itVolume ? m_objects_model->GetIdByItem(m_objects_model->GetTopParent(item)) : -1; + + const int vol_idx = type & itVolume ? m_objects_model->GetVolumeIdByItem(item) : -1; + + wxGetApp().plater()->fix_through_netfabb(obj_idx, vol_idx); - if (type & itObject) - wxGetApp().plater()->fix_through_netfabb(m_objects_model->GetIdByItem(item)); - else if (type & itVolume) - wxGetApp().plater()->fix_through_netfabb(m_objects_model->GetIdByItem(m_objects_model->GetTopParent(item)), - m_objects_model->GetVolumeIdByItem(item)); + update_item_error_icon(obj_idx, vol_idx); +} + +void ObjectList::update_item_error_icon(const int obj_idx, const int vol_idx) const +{ + const wxDataViewItem item = vol_idx <0 ? m_objects_model->GetItemById(obj_idx) : + m_objects_model->GetItemByVolumeId(obj_idx, vol_idx); + if (!item) + return; + + auto model_object = (*m_objects)[obj_idx]; + + const stl_stats& stats = model_object->volumes[vol_idx<0 ? 0 : vol_idx]->mesh.stl.stats; + const int errors = stats.degenerate_facets + stats.edges_fixed + stats.facets_removed + + stats.facets_added + stats.facets_reversed + stats.backwards_edges; + + if (errors == 0) { + // delete Error_icon if all errors are fixed + wxVariant variant; + variant << PrusaDataViewBitmapText(from_u8(model_object->name), wxNullBitmap); + m_objects_model->SetValue(variant, item, 0); + } } void ObjectList::ItemValueChanged(wxDataViewEvent &event) @@ -2309,5 +2357,86 @@ void ObjectList::OnEditingDone(wxDataViewEvent &event) _(L("the following characters are not allowed:")) + " <>:/\\|?*\""); } +void ObjectList::show_extruder_selection_menu() +{ + wxDataViewItemArray sels; + GetSelections(sels); + + for (const wxDataViewItem& item : sels) + if (!(m_objects_model->GetItemType(item) & (itVolume | itObject))) + // show this menu only for Object(s)/Volume(s) selection + return; + + wxMenu* menu = new wxMenu(); + append_menu_item(menu, wxID_ANY, _(L("Set extruder for selected items")), + _(L("Select extruder number for selected objects and/or parts")), + [this](wxCommandEvent&) { extruder_selection(); }, "", menu); + PopupMenu(menu); +} + +void ObjectList::extruder_selection() +{ + wxArrayString choices; + choices.Add("default"); + for (int i = 1; i <= extruders_count(); ++i) + choices.Add(wxString::Format("%d", i)); + + const wxString& selected_extruder = wxGetSingleChoice(_(L("Select extruder number:")), + _(L("This extruder will be set for selected items")), + choices, 0, this); + if (selected_extruder.IsEmpty()) + return; + + const int extruder_num = selected_extruder == "default" ? 0 : atoi(selected_extruder.c_str()); + +// /* Another variant for an extruder selection */ +// extruder_num = wxGetNumberFromUser(_(L("Attention!!! \n" +// "It's a possibile to set an extruder number \n" +// "for whole Object(s) and/or object Part(s), \n" +// "not for an Instance. ")), +// _(L("Enter extruder number:")), +// _(L("This extruder will be set for selected items")), +// 1, 1, 5, this); + + set_extruder_for_selected_items(extruder_num); +} + +void ObjectList::set_extruder_for_selected_items(const int extruder) const +{ + wxDataViewItemArray sels; + GetSelections(sels); + + for (const wxDataViewItem& item : sels) + { + const ItemType type = m_objects_model->GetItemType(item); + + const int obj_idx = type & itObject ? m_objects_model->GetIdByItem(item) : + m_objects_model->GetIdByItem(m_objects_model->GetTopParent(item)); + + const int vol_idx = type & itVolume ? m_objects_model->GetVolumeIdByItem(item) : -1; + + DynamicPrintConfig& config = type & itObject ? (*m_objects)[obj_idx]->config : + (*m_objects)[obj_idx]->volumes[vol_idx]->config; + + if (config.has("extruder")) { + if (extruder == 0) + config.erase("extruder"); + else + config.option("extruder")->value = extruder; + } + else if (extruder > 0) + config.set_key_value("extruder", new ConfigOptionInt(extruder)); + + const wxString extruder_str = extruder == 0 ? wxString ("default") : + wxString::Format("%d", config.option("extruder")->value); + m_objects_model->SetValue(extruder_str, item, 1); + + wxGetApp().plater()->canvas3D()->ensure_on_bed(obj_idx); + } + + // update scene + wxGetApp().plater()->update(); +} + } //namespace GUI } //namespace Slic3r \ No newline at end of file diff --git a/src/slic3r/GUI/GUI_ObjectList.hpp b/src/slic3r/GUI/GUI_ObjectList.hpp index 762020bda..fa4db8f9d 100644 --- a/src/slic3r/GUI/GUI_ObjectList.hpp +++ b/src/slic3r/GUI/GUI_ObjectList.hpp @@ -270,6 +270,7 @@ public: void split_instances(); void rename_item(); void fix_through_netfabb() const; + void update_item_error_icon(const int obj_idx, int vol_idx) const ; private: void OnChar(wxKeyEvent& event); void OnContextMenu(wxDataViewEvent &event); @@ -282,6 +283,10 @@ private: void ItemValueChanged(wxDataViewEvent &event); void OnEditingDone(wxDataViewEvent &event); + void show_extruder_selection_menu(); + void extruder_selection(); + void set_extruder_for_selected_items(const int extruder) const ; + std::vector get_options(const bool is_part); const std::vector& get_options_for_bundle(const wxString& bundle_name); void get_options_menu(settings_menu_hierarchy& settings_menu, const bool is_part); diff --git a/src/slic3r/GUI/GUI_Preview.cpp b/src/slic3r/GUI/GUI_Preview.cpp index d48bb5f49..9860f26b1 100644 --- a/src/slic3r/GUI/GUI_Preview.cpp +++ b/src/slic3r/GUI/GUI_Preview.cpp @@ -27,17 +27,11 @@ namespace Slic3r { namespace GUI { -View3D::View3D(wxWindow* parent, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process) + View3D::View3D(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process) : m_canvas_widget(nullptr) , m_canvas(nullptr) -#if !ENABLE_IMGUI - , m_gizmo_widget(nullptr) -#endif // !ENABLE_IMGUI - , m_model(nullptr) - , m_config(nullptr) - , m_process(nullptr) { - init(parent, model, config, process); + init(parent, bed, camera, view_toolbar, model, config, process); } View3D::~View3D() @@ -50,13 +44,13 @@ View3D::~View3D() } } -bool View3D::init(wxWindow* parent, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process) +bool View3D::init(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process) { if (!Create(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0 /* disable wxTAB_TRAVERSAL */)) return false; m_canvas_widget = GLCanvas3DManager::create_wxglcanvas(this); - _3DScene::add_canvas(m_canvas_widget); + _3DScene::add_canvas(m_canvas_widget, bed, camera, view_toolbar); m_canvas = _3DScene::get_canvas(this->m_canvas_widget); m_canvas->allow_multisample(GLCanvas3DManager::can_multisample()); @@ -70,17 +64,8 @@ bool View3D::init(wxWindow* parent, Model* model, DynamicPrintConfig* config, Ba m_canvas->enable_gizmos(true); m_canvas->enable_toolbar(true); -#if !ENABLE_IMGUI - m_gizmo_widget = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_gizmo_widget->SetSizer(new wxBoxSizer(wxVERTICAL)); - m_canvas->set_external_gizmo_widgets_parent(m_gizmo_widget); -#endif // !ENABLE_IMGUI - wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL); main_sizer->Add(m_canvas_widget, 1, wxALL | wxEXPAND, 0); -#if !ENABLE_IMGUI - main_sizer->Add(m_gizmo_widget, 0, wxALL | wxEXPAND, 0); -#endif // !ENABLE_IMGUI SetSizer(main_sizer); SetMinSize(GetSize()); @@ -89,18 +74,6 @@ bool View3D::init(wxWindow* parent, Model* model, DynamicPrintConfig* config, Ba return true; } -void View3D::set_bed(Bed3D* bed) -{ - if (m_canvas != nullptr) - m_canvas->set_bed(bed); -} - -void View3D::set_view_toolbar(GLToolbar* toolbar) -{ - if (m_canvas != nullptr) - m_canvas->set_view_toolbar(toolbar); -} - void View3D::set_as_dirty() { if (m_canvas != nullptr) @@ -193,7 +166,7 @@ void View3D::render() m_canvas->set_as_dirty(); } -Preview::Preview(wxWindow* parent, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data, std::function schedule_background_process_func) +Preview::Preview(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data, std::function schedule_background_process_func) : m_canvas_widget(nullptr) , m_canvas(nullptr) , m_double_slider_sizer(nullptr) @@ -213,28 +186,26 @@ Preview::Preview(wxWindow* parent, DynamicPrintConfig* config, BackgroundSlicing , m_loaded(false) , m_enabled(false) , m_schedule_background_process(schedule_background_process_func) + , m_volumes_cleanup_required(false) { - if (init(parent, config, process, gcode_preview_data)) + if (init(parent, bed, camera, view_toolbar)) { show_hide_ui_elements("none"); load_print(); } } -bool Preview::init(wxWindow* parent, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data) +bool Preview::init(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar) { - if ((config == nullptr) || (process == nullptr) || (gcode_preview_data == nullptr)) - return false; - if (!Create(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0 /* disable wxTAB_TRAVERSAL */)) return false; m_canvas_widget = GLCanvas3DManager::create_wxglcanvas(this); - _3DScene::add_canvas(m_canvas_widget); - m_canvas = _3DScene::get_canvas(this->m_canvas_widget); + _3DScene::add_canvas(m_canvas_widget, bed, camera, view_toolbar); + m_canvas = _3DScene::get_canvas(this->m_canvas_widget); m_canvas->allow_multisample(GLCanvas3DManager::can_multisample()); m_canvas->set_config(m_config); - m_canvas->set_process(process); + m_canvas->set_process(m_process); m_canvas->enable_legend_texture(true); m_canvas->enable_dynamic_background(true); @@ -342,18 +313,6 @@ Preview::~Preview() } } -void Preview::set_bed(Bed3D* bed) -{ - if (m_canvas != nullptr) - m_canvas->set_bed(bed); -} - -void Preview::set_view_toolbar(GLToolbar* toolbar) -{ - if (m_canvas != nullptr) - m_canvas->set_view_toolbar(toolbar); -} - void Preview::set_number_extruders(unsigned int number_extruders) { if (m_number_extruders != number_extruders) @@ -390,18 +349,6 @@ void Preview::select_view(const std::string& direction) m_canvas->select_view(direction); } -void Preview::set_viewport_from_scene(GLCanvas3D* canvas) -{ - if (canvas != nullptr) - m_canvas->set_viewport_from_scene(*canvas); -} - -void Preview::set_viewport_into_scene(GLCanvas3D* canvas) -{ - if (canvas != nullptr) - canvas->set_viewport_from_scene(*m_canvas); -} - void Preview::set_drop_target(wxDropTarget* target) { if (target != nullptr) @@ -417,18 +364,22 @@ void Preview::load_print() load_print_as_sla(); } -void Preview::reload_print(bool force, bool keep_volumes) +void Preview::reload_print(bool keep_volumes) { - if (!keep_volumes) + if (!IsShown()) + { + m_volumes_cleanup_required = !keep_volumes; + return; + } + + if (m_volumes_cleanup_required || !keep_volumes) { m_canvas->reset_volumes(); m_canvas->reset_legend_texture(); m_loaded = false; + m_volumes_cleanup_required = false; } - if (!IsShown() && !force) - return; - load_print(); } @@ -608,15 +559,14 @@ static int find_close_layer_idx(const std::vector& zs, double &z, double return -1; } -void Preview::update_double_slider(const std::vector& layers_z, bool force_sliders_full_range) +void Preview::update_double_slider(const std::vector& layers_z) { // Save the initial slider span. double z_low = m_slider->GetLowerValueD(); double z_high = m_slider->GetHigherValueD(); bool was_empty = m_slider->GetMaxValue() == 0; - bool span_changed = layers_z.empty() || std::abs(layers_z.back() - m_slider->GetMaxValueD()) > 1e-6; - force_sliders_full_range |= was_empty | span_changed; - bool snap_to_min = force_sliders_full_range || m_slider->is_lower_at_min(); + bool force_sliders_full_range = was_empty; + bool snap_to_min = force_sliders_full_range || m_slider->is_lower_at_min(); bool snap_to_max = force_sliders_full_range || m_slider->is_higher_at_max(); std::vector> values; @@ -788,10 +738,11 @@ void Preview::load_print_as_fff() if (IsShown()) { - if (gcode_preview_data_valid) + if (gcode_preview_data_valid) { // Load the real G-code preview. m_canvas->load_gcode_preview(*m_gcode_preview_data, colors); - else + m_loaded = true; + } else // Load the initial preview based on slices, not the final G-code. m_canvas->load_preview(colors, color_print_values); show_hide_ui_elements(gcode_preview_data_valid ? "full" : "simple"); @@ -803,7 +754,6 @@ void Preview::load_print_as_fff() m_canvas_widget->Refresh(); } else update_sliders(zs); - m_loaded = true; } } diff --git a/src/slic3r/GUI/GUI_Preview.hpp b/src/slic3r/GUI/GUI_Preview.hpp index 1d65aff1b..59f62ded1 100644 --- a/src/slic3r/GUI/GUI_Preview.hpp +++ b/src/slic3r/GUI/GUI_Preview.hpp @@ -28,30 +28,20 @@ namespace GUI { class GLCanvas3D; class GLToolbar; class Bed3D; +struct Camera; class View3D : public wxPanel { wxGLCanvas* m_canvas_widget; GLCanvas3D* m_canvas; -#if !ENABLE_IMGUI - wxPanel* m_gizmo_widget; -#endif // !ENABLE_IMGUI - - Model* m_model; - DynamicPrintConfig* m_config; - BackgroundSlicingProcess* m_process; - public: - View3D(wxWindow* parent, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process); + View3D(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process); virtual ~View3D(); wxGLCanvas* get_wxglcanvas() { return m_canvas_widget; } GLCanvas3D* get_canvas3d() { return m_canvas; } - void set_bed(Bed3D* bed); - void set_view_toolbar(GLToolbar* toolbar); - void set_as_dirty(); void bed_shape_changed(); @@ -75,7 +65,7 @@ public: void render(); private: - bool init(wxWindow* parent, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process); + bool init(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, Model* model, DynamicPrintConfig* config, BackgroundSlicingProcess* process); }; class Preview : public wxPanel @@ -96,6 +86,8 @@ class Preview : public wxPanel BackgroundSlicingProcess* m_process; GCodePreviewData* m_gcode_preview_data; + bool m_volumes_cleanup_required; + // Calling this function object forces Plater::schedule_background_process. std::function m_schedule_background_process; @@ -108,30 +100,25 @@ class Preview : public wxPanel PrusaDoubleSlider* m_slider {nullptr}; public: - Preview(wxWindow* parent, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data, std::function schedule_background_process = [](){}); + Preview(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data, std::function schedule_background_process = [](){}); virtual ~Preview(); wxGLCanvas* get_wxglcanvas() { return m_canvas_widget; } GLCanvas3D* get_canvas3d() { return m_canvas; } - void set_bed(Bed3D* bed); - void set_view_toolbar(GLToolbar* toolbar); - void set_number_extruders(unsigned int number_extruders); void set_canvas_as_dirty(); void set_enabled(bool enabled); void bed_shape_changed(); void select_view(const std::string& direction); - void set_viewport_from_scene(GLCanvas3D* canvas); - void set_viewport_into_scene(GLCanvas3D* canvas); void set_drop_target(wxDropTarget* target); void load_print(); - void reload_print(bool force = false, bool keep_volumes = false); + void reload_print(bool keep_volumes = false); void refresh_print(); private: - bool init(wxWindow* parent, DynamicPrintConfig* config, BackgroundSlicingProcess* process, GCodePreviewData* gcode_preview_data); + bool init(wxWindow* parent, Bed3D& bed, Camera& camera, GLToolbar& view_toolbar); void bind_event_handlers(); void unbind_event_handlers(); @@ -151,7 +138,7 @@ private: // Create/Update/Reset double slider on 3dPreview void create_double_slider(); - void update_double_slider(const std::vector& layers_z, bool force_sliders_full_range = false); + void update_double_slider(const std::vector& layers_z); void fill_slider_values(std::vector> &values, const std::vector &layers_z); void reset_double_slider(); diff --git a/src/slic3r/GUI/Gizmos/GLGizmoBase.cpp b/src/slic3r/GUI/Gizmos/GLGizmoBase.cpp new file mode 100644 index 000000000..290541a18 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoBase.cpp @@ -0,0 +1,281 @@ +#include "GLGizmoBase.hpp" + +#include + +#include "slic3r/GUI/GUI_App.hpp" + + + + + +// TODO: Display tooltips quicker on Linux + + + +namespace Slic3r { +namespace GUI { + +const float GLGizmoBase::Grabber::SizeFactor = 0.025f; +const float GLGizmoBase::Grabber::MinHalfSize = 1.5f; +const float GLGizmoBase::Grabber::DraggingScaleFactor = 1.25f; + +GLGizmoBase::Grabber::Grabber() + : center(Vec3d::Zero()) + , angles(Vec3d::Zero()) + , dragging(false) + , enabled(true) +{ + color[0] = 1.0f; + color[1] = 1.0f; + color[2] = 1.0f; +} + +void GLGizmoBase::Grabber::render(bool hover, float size) const +{ + float render_color[3]; + if (hover) + { + render_color[0] = 1.0f - color[0]; + render_color[1] = 1.0f - color[1]; + render_color[2] = 1.0f - color[2]; + } + else + ::memcpy((void*)render_color, (const void*)color, 3 * sizeof(float)); + + render(size, render_color, true); +} + +float GLGizmoBase::Grabber::get_half_size(float size) const +{ + return std::max(size * SizeFactor, MinHalfSize); +} + +float GLGizmoBase::Grabber::get_dragging_half_size(float size) const +{ + return std::max(size * SizeFactor * DraggingScaleFactor, MinHalfSize); +} + +void GLGizmoBase::Grabber::render(float size, const float* render_color, bool use_lighting) const +{ + float half_size = dragging ? get_dragging_half_size(size) : get_half_size(size); + + if (use_lighting) + ::glEnable(GL_LIGHTING); + + ::glColor3fv(render_color); + + ::glPushMatrix(); + ::glTranslated(center(0), center(1), center(2)); + + ::glRotated(Geometry::rad2deg(angles(2)), 0.0, 0.0, 1.0); + ::glRotated(Geometry::rad2deg(angles(1)), 0.0, 1.0, 0.0); + ::glRotated(Geometry::rad2deg(angles(0)), 1.0, 0.0, 0.0); + + // face min x + ::glPushMatrix(); + ::glTranslatef(-(GLfloat)half_size, 0.0f, 0.0f); + ::glRotatef(-90.0f, 0.0f, 1.0f, 0.0f); + render_face(half_size); + ::glPopMatrix(); + + // face max x + ::glPushMatrix(); + ::glTranslatef((GLfloat)half_size, 0.0f, 0.0f); + ::glRotatef(90.0f, 0.0f, 1.0f, 0.0f); + render_face(half_size); + ::glPopMatrix(); + + // face min y + ::glPushMatrix(); + ::glTranslatef(0.0f, -(GLfloat)half_size, 0.0f); + ::glRotatef(90.0f, 1.0f, 0.0f, 0.0f); + render_face(half_size); + ::glPopMatrix(); + + // face max y + ::glPushMatrix(); + ::glTranslatef(0.0f, (GLfloat)half_size, 0.0f); + ::glRotatef(-90.0f, 1.0f, 0.0f, 0.0f); + render_face(half_size); + ::glPopMatrix(); + + // face min z + ::glPushMatrix(); + ::glTranslatef(0.0f, 0.0f, -(GLfloat)half_size); + ::glRotatef(180.0f, 1.0f, 0.0f, 0.0f); + render_face(half_size); + ::glPopMatrix(); + + // face max z + ::glPushMatrix(); + ::glTranslatef(0.0f, 0.0f, (GLfloat)half_size); + render_face(half_size); + ::glPopMatrix(); + + ::glPopMatrix(); + + if (use_lighting) + ::glDisable(GL_LIGHTING); +} + +void GLGizmoBase::Grabber::render_face(float half_size) const +{ + ::glBegin(GL_TRIANGLES); + ::glNormal3f(0.0f, 0.0f, 1.0f); + ::glVertex3f(-(GLfloat)half_size, -(GLfloat)half_size, 0.0f); + ::glVertex3f((GLfloat)half_size, -(GLfloat)half_size, 0.0f); + ::glVertex3f((GLfloat)half_size, (GLfloat)half_size, 0.0f); + ::glVertex3f((GLfloat)half_size, (GLfloat)half_size, 0.0f); + ::glVertex3f(-(GLfloat)half_size, (GLfloat)half_size, 0.0f); + ::glVertex3f(-(GLfloat)half_size, -(GLfloat)half_size, 0.0f); + ::glEnd(); +} + +#if ENABLE_SVG_ICONS +GLGizmoBase::GLGizmoBase(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) +#else +GLGizmoBase::GLGizmoBase(GLCanvas3D& parent, unsigned int sprite_id) +#endif // ENABLE_SVG_ICONS + : m_parent(parent) + , m_group_id(-1) + , m_state(Off) + , m_shortcut_key(0) +#if ENABLE_SVG_ICONS + , m_icon_filename(icon_filename) +#endif // ENABLE_SVG_ICONS + , m_sprite_id(sprite_id) + , m_hover_id(-1) + , m_dragging(false) + , m_imgui(wxGetApp().imgui()) +{ + ::memcpy((void*)m_base_color, (const void*)DEFAULT_BASE_COLOR, 3 * sizeof(float)); + ::memcpy((void*)m_drag_color, (const void*)DEFAULT_DRAG_COLOR, 3 * sizeof(float)); + ::memcpy((void*)m_highlight_color, (const void*)DEFAULT_HIGHLIGHT_COLOR, 3 * sizeof(float)); +} + +void GLGizmoBase::set_hover_id(int id) +{ + if (m_grabbers.empty() || (id < (int)m_grabbers.size())) + { + m_hover_id = id; + on_set_hover_id(); + } +} + +void GLGizmoBase::set_highlight_color(const float* color) +{ + if (color != nullptr) + ::memcpy((void*)m_highlight_color, (const void*)color, 3 * sizeof(float)); +} + +void GLGizmoBase::enable_grabber(unsigned int id) +{ + if ((0 <= id) && (id < (unsigned int)m_grabbers.size())) + m_grabbers[id].enabled = true; + + on_enable_grabber(id); +} + +void GLGizmoBase::disable_grabber(unsigned int id) +{ + if ((0 <= id) && (id < (unsigned int)m_grabbers.size())) + m_grabbers[id].enabled = false; + + on_disable_grabber(id); +} + +void GLGizmoBase::start_dragging(const GLCanvas3D::Selection& selection) +{ + m_dragging = true; + + for (int i = 0; i < (int)m_grabbers.size(); ++i) + { + m_grabbers[i].dragging = (m_hover_id == i); + } + + on_start_dragging(selection); +} + +void GLGizmoBase::stop_dragging() +{ + m_dragging = false; + + for (int i = 0; i < (int)m_grabbers.size(); ++i) + { + m_grabbers[i].dragging = false; + } + + on_stop_dragging(); +} + +void GLGizmoBase::update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) + on_update(data, selection); +} + +std::array GLGizmoBase::picking_color_component(unsigned int id) const +{ + static const float INV_255 = 1.0f / 255.0f; + + id = BASE_ID - id; + + if (m_group_id > -1) + id -= m_group_id; + + // color components are encoded to match the calculation of volume_id made into GLCanvas3D::_picking_pass() + return std::array { (float)((id >> 0) & 0xff) * INV_255, // red + (float)((id >> 8) & 0xff) * INV_255, // green + (float)((id >> 16) & 0xff) * INV_255 }; // blue +} + +void GLGizmoBase::render_grabbers(const BoundingBoxf3& box) const +{ + float size = (float)box.max_size(); + + for (int i = 0; i < (int)m_grabbers.size(); ++i) + { + if (m_grabbers[i].enabled) + m_grabbers[i].render((m_hover_id == i), size); + } +} + +void GLGizmoBase::render_grabbers(float size) const +{ + for (int i = 0; i < (int)m_grabbers.size(); ++i) + { + if (m_grabbers[i].enabled) + m_grabbers[i].render((m_hover_id == i), size); + } +} + +void GLGizmoBase::render_grabbers_for_picking(const BoundingBoxf3& box) const +{ + float size = (float)box.max_size(); + + for (unsigned int i = 0; i < (unsigned int)m_grabbers.size(); ++i) + { + if (m_grabbers[i].enabled) + { + std::array color = picking_color_component(i); + m_grabbers[i].color[0] = color[0]; + m_grabbers[i].color[1] = color[1]; + m_grabbers[i].color[2] = color[2]; + m_grabbers[i].render_for_picking(size); + } + } +} + + +void GLGizmoBase::set_tooltip(const std::string& tooltip) const +{ + m_parent.set_tooltip(tooltip); +} + +std::string GLGizmoBase::format(float value, unsigned int decimals) const +{ + return Slic3r::string_printf("%.*f", decimals, value); +} + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoBase.hpp b/src/slic3r/GUI/Gizmos/GLGizmoBase.hpp new file mode 100644 index 000000000..e8328bcd4 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoBase.hpp @@ -0,0 +1,182 @@ +#ifndef slic3r_GLGizmoBase_hpp_ +#define slic3r_GLGizmoBase_hpp_ + +#include "libslic3r/Point.hpp" + +#include "slic3r/GUI/GLCanvas3D.hpp" +#include "slic3r/GUI/I18N.hpp" + + +class wxWindow; +class GLUquadric; +typedef class GLUquadric GLUquadricObj; + + +namespace Slic3r { + +class BoundingBoxf3; +class Linef3; +class ModelObject; + +namespace GUI { + +static const float DEFAULT_BASE_COLOR[3] = { 0.625f, 0.625f, 0.625f }; +static const float DEFAULT_DRAG_COLOR[3] = { 1.0f, 1.0f, 1.0f }; +static const float DEFAULT_HIGHLIGHT_COLOR[3] = { 1.0f, 0.38f, 0.0f }; +static const float AXES_COLOR[3][3] = { { 1.0f, 0.0f, 0.0f }, { 0.0f, 1.0f, 0.0f }, { 0.0f, 0.0f, 1.0f } }; + + + +class ImGuiWrapper; + + +class GLGizmoBase +{ +public: + // Starting value for ids to avoid clashing with ids used by GLVolumes + // (254 is choosen to leave some space for forward compatibility) + static const unsigned int BASE_ID = 255 * 255 * 254; + +protected: + struct Grabber + { + static const float SizeFactor; + static const float MinHalfSize; + static const float DraggingScaleFactor; + + Vec3d center; + Vec3d angles; + float color[3]; + bool enabled; + bool dragging; + + Grabber(); + + void render(bool hover, float size) const; + void render_for_picking(float size) const { render(size, color, false); } + + float get_half_size(float size) const; + float get_dragging_half_size(float size) const; + + private: + void render(float size, const float* render_color, bool use_lighting) const; + void render_face(float half_size) const; + }; + +public: + enum EState + { + Off, + Hover, + On, + Num_States + }; + + struct UpdateData + { + const Linef3 mouse_ray; + const Point* mouse_pos; + bool shift_down; + + UpdateData(const Linef3& mouse_ray, const Point* mouse_pos = nullptr, bool shift_down = false) + : mouse_ray(mouse_ray), mouse_pos(mouse_pos), shift_down(shift_down) + {} + }; + +protected: + GLCanvas3D& m_parent; + + int m_group_id; + EState m_state; + int m_shortcut_key; +#if ENABLE_SVG_ICONS + std::string m_icon_filename; +#endif // ENABLE_SVG_ICONS + unsigned int m_sprite_id; + int m_hover_id; + bool m_dragging; + float m_base_color[3]; + float m_drag_color[3]; + float m_highlight_color[3]; + mutable std::vector m_grabbers; + ImGuiWrapper* m_imgui; + +public: +#if ENABLE_SVG_ICONS + GLGizmoBase(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoBase(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + virtual ~GLGizmoBase() {} + + bool init() { return on_init(); } + + std::string get_name() const { return on_get_name(); } + + int get_group_id() const { return m_group_id; } + void set_group_id(int id) { m_group_id = id; } + + EState get_state() const { return m_state; } + void set_state(EState state) { m_state = state; on_set_state(); } + + int get_shortcut_key() const { return m_shortcut_key; } + void set_shortcut_key(int key) { m_shortcut_key = key; } + +#if ENABLE_SVG_ICONS + const std::string& get_icon_filename() const { return m_icon_filename; } +#endif // ENABLE_SVG_ICONS + + bool is_activable(const GLCanvas3D::Selection& selection) const { return on_is_activable(selection); } + bool is_selectable() const { return on_is_selectable(); } + + unsigned int get_sprite_id() const { return m_sprite_id; } + + int get_hover_id() const { return m_hover_id; } + void set_hover_id(int id); + + void set_highlight_color(const float* color); + + void enable_grabber(unsigned int id); + void disable_grabber(unsigned int id); + + void start_dragging(const GLCanvas3D::Selection& selection); + void stop_dragging(); + bool is_dragging() const { return m_dragging; } + + void update(const UpdateData& data, const GLCanvas3D::Selection& selection); + + void render(const GLCanvas3D::Selection& selection) const { on_render(selection); } + void render_for_picking(const GLCanvas3D::Selection& selection) const { on_render_for_picking(selection); } + void render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) { on_render_input_window(x, y, bottom_limit, selection); } + +protected: + virtual bool on_init() = 0; + virtual std::string on_get_name() const = 0; + virtual void on_set_state() {} + virtual void on_set_hover_id() {} + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return true; } + virtual bool on_is_selectable() const { return true; } + virtual void on_enable_grabber(unsigned int id) {} + virtual void on_disable_grabber(unsigned int id) {} + virtual void on_start_dragging(const GLCanvas3D::Selection& selection) {} + virtual void on_stop_dragging() {} + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) = 0; + virtual void on_render(const GLCanvas3D::Selection& selection) const = 0; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const = 0; + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) {} + + // Returns the picking color for the given id, based on the BASE_ID constant + // No check is made for clashing with other picking color (i.e. GLVolumes) + std::array picking_color_component(unsigned int id) const; + void render_grabbers(const BoundingBoxf3& box) const; + void render_grabbers(float size) const; + void render_grabbers_for_picking(const BoundingBoxf3& box) const; + + void set_tooltip(const std::string& tooltip) const; + std::string format(float value, unsigned int decimals) const; +}; + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoBase_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp b/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp new file mode 100644 index 000000000..54a39c6d5 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoCut.cpp @@ -0,0 +1,257 @@ +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoCut.hpp" + +#include + +#include +#include +#include +#include + +#include "slic3r/GUI/GUI_App.hpp" + + +namespace Slic3r { +namespace GUI { + + + + + + +// GLGizmoCut + +class GLGizmoCutPanel : public wxPanel +{ +public: + GLGizmoCutPanel(wxWindow *parent); + + void display(bool display); +private: + bool m_active; + wxCheckBox *m_cb_rotate; + wxButton *m_btn_cut; + wxButton *m_btn_cancel; +}; + +GLGizmoCutPanel::GLGizmoCutPanel(wxWindow *parent) + : wxPanel(parent) + , m_active(false) + , m_cb_rotate(new wxCheckBox(this, wxID_ANY, _(L("Rotate lower part upwards")))) + , m_btn_cut(new wxButton(this, wxID_OK, _(L("Perform cut")))) + , m_btn_cancel(new wxButton(this, wxID_CANCEL, _(L("Cancel")))) +{ + enum { MARGIN = 5 }; + + auto *sizer = new wxBoxSizer(wxHORIZONTAL); + + auto *label = new wxStaticText(this, wxID_ANY, _(L("Cut object:"))); + sizer->Add(label, 0, wxALL | wxALIGN_CENTER, MARGIN); + sizer->Add(m_cb_rotate, 0, wxALL | wxALIGN_CENTER, MARGIN); + sizer->AddStretchSpacer(); + sizer->Add(m_btn_cut, 0, wxALL | wxALIGN_CENTER, MARGIN); + sizer->Add(m_btn_cancel, 0, wxALL | wxALIGN_CENTER, MARGIN); + + SetSizer(sizer); +} + +void GLGizmoCutPanel::display(bool display) +{ + Show(display); + GetParent()->Layout(); +} + + +const double GLGizmoCut::Offset = 10.0; +const double GLGizmoCut::Margin = 20.0; +const std::array GLGizmoCut::GrabberColor = { 1.0, 0.5, 0.0 }; + +#if ENABLE_SVG_ICONS +GLGizmoCut::GLGizmoCut(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoCut::GLGizmoCut(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS + , m_cut_z(0.0) + , m_max_z(0.0) + , m_keep_upper(true) + , m_keep_lower(true) + , m_rotate_lower(false) +{} + + +bool GLGizmoCut::on_init() +{ + m_grabbers.emplace_back(); + m_shortcut_key = WXK_CONTROL_C; + return true; +} + +std::string GLGizmoCut::on_get_name() const +{ + return L("Cut [C]"); +} + +void GLGizmoCut::on_set_state() +{ + // Reset m_cut_z on gizmo activation + if (get_state() == On) { + m_cut_z = m_parent.get_selection().get_bounding_box().size()(2) / 2.0; + } +} + +bool GLGizmoCut::on_is_activable(const GLCanvas3D::Selection& selection) const +{ + return selection.is_single_full_instance() && !selection.is_wipe_tower(); +} + +void GLGizmoCut::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if (m_hover_id == -1) { return; } + + const BoundingBoxf3& box = selection.get_bounding_box(); + m_start_z = m_cut_z; + update_max_z(selection); + m_drag_pos = m_grabbers[m_hover_id].center; + m_drag_center = box.center(); + m_drag_center(2) = m_cut_z; +} + +void GLGizmoCut::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) { + set_cut_z(m_start_z + calc_projection(data.mouse_ray)); + } +} + +void GLGizmoCut::on_render(const GLCanvas3D::Selection& selection) const +{ + if (m_grabbers[0].dragging) { + set_tooltip("Z: " + format(m_cut_z, 2)); + } + + update_max_z(selection); + + const BoundingBoxf3& box = selection.get_bounding_box(); + Vec3d plane_center = box.center(); + plane_center(2) = m_cut_z; + + const float min_x = box.min(0) - Margin; + const float max_x = box.max(0) + Margin; + const float min_y = box.min(1) - Margin; + const float max_y = box.max(1) + Margin; + ::glEnable(GL_DEPTH_TEST); + ::glDisable(GL_CULL_FACE); + ::glEnable(GL_BLEND); + ::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); + + // Draw the cutting plane + ::glBegin(GL_QUADS); + ::glColor4f(0.8f, 0.8f, 0.8f, 0.5f); + ::glVertex3f(min_x, min_y, plane_center(2)); + ::glVertex3f(max_x, min_y, plane_center(2)); + ::glVertex3f(max_x, max_y, plane_center(2)); + ::glVertex3f(min_x, max_y, plane_center(2)); + ::glEnd(); + + ::glEnable(GL_CULL_FACE); + ::glDisable(GL_BLEND); + + // TODO: draw cut part contour? + + // Draw the grabber and the connecting line + m_grabbers[0].center = plane_center; + m_grabbers[0].center(2) = plane_center(2) + Offset; + + ::glDisable(GL_DEPTH_TEST); + ::glLineWidth(m_hover_id != -1 ? 2.0f : 1.5f); + ::glColor3f(1.0, 1.0, 0.0); + ::glBegin(GL_LINES); + ::glVertex3dv(plane_center.data()); + ::glVertex3dv(m_grabbers[0].center.data()); + ::glEnd(); + + std::copy(std::begin(GrabberColor), std::end(GrabberColor), m_grabbers[0].color); + m_grabbers[0].render(m_hover_id == 0, box.max_size()); +} + +void GLGizmoCut::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glDisable(GL_DEPTH_TEST); + + render_grabbers_for_picking(selection.get_bounding_box()); +} + +void GLGizmoCut::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) +{ + m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); + m_imgui->set_next_window_bg_alpha(0.5f); + m_imgui->begin(_(L("Cut")), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); + + ImGui::PushItemWidth(100.0f); + bool _value_changed = ImGui::InputDouble("Z", &m_cut_z, 0.0f, 0.0f, "%.2f"); + + m_imgui->checkbox(_(L("Keep upper part")), m_keep_upper); + m_imgui->checkbox(_(L("Keep lower part")), m_keep_lower); + m_imgui->checkbox(_(L("Rotate lower part upwards")), m_rotate_lower); + + m_imgui->disabled_begin(!m_keep_upper && !m_keep_lower); + const bool cut_clicked = m_imgui->button(_(L("Perform cut"))); + m_imgui->disabled_end(); + + m_imgui->end(); + + if (cut_clicked && (m_keep_upper || m_keep_lower)) { + perform_cut(selection); + } +} + +void GLGizmoCut::update_max_z(const GLCanvas3D::Selection& selection) const +{ + m_max_z = selection.get_bounding_box().size()(2); + set_cut_z(m_cut_z); +} + +void GLGizmoCut::set_cut_z(double cut_z) const +{ + // Clamp the plane to the object's bounding box + m_cut_z = std::max(0.0, std::min(m_max_z, cut_z)); +} + +void GLGizmoCut::perform_cut(const GLCanvas3D::Selection& selection) +{ + const auto instance_idx = selection.get_instance_idx(); + const auto object_idx = selection.get_object_idx(); + + wxCHECK_RET(instance_idx >= 0 && object_idx >= 0, "GLGizmoCut: Invalid object selection"); + + wxGetApp().plater()->cut(object_idx, instance_idx, m_cut_z, m_keep_upper, m_keep_lower, m_rotate_lower); +} + +double GLGizmoCut::calc_projection(const Linef3& mouse_ray) const +{ + double projection = 0.0; + + const Vec3d starting_vec = m_drag_pos - m_drag_center; + const double len_starting_vec = starting_vec.norm(); + if (len_starting_vec != 0.0) + { + Vec3d mouse_dir = mouse_ray.unit_vector(); + // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position + // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form + // in our case plane normal and ray direction are the same (orthogonal view) + // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal + Vec3d inters = mouse_ray.a + (m_drag_pos - mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; + // vector from the starting position to the found intersection + Vec3d inters_vec = inters - m_drag_pos; + + // finds projection of the vector along the staring direction + projection = inters_vec.dot(starting_vec.normalized()); + } + return projection; +} + + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp b/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp new file mode 100644 index 000000000..beec6d1da --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoCut.hpp @@ -0,0 +1,53 @@ +#ifndef slic3r_GLGizmoCut_hpp_ +#define slic3r_GLGizmoCut_hpp_ + +#include "GLGizmoBase.hpp" + + +namespace Slic3r { +namespace GUI { + +class GLGizmoCut : public GLGizmoBase +{ + static const double Offset; + static const double Margin; + static const std::array GrabberColor; + + mutable double m_cut_z; + double m_start_z; + mutable double m_max_z; + Vec3d m_drag_pos; + Vec3d m_drag_center; + bool m_keep_upper; + bool m_keep_lower; + bool m_rotate_lower; + +public: +#if ENABLE_SVG_ICONS + GLGizmoCut(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoCut(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const; + virtual void on_set_state(); + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); + +private: + void update_max_z(const GLCanvas3D::Selection& selection) const; + void set_cut_z(double cut_z) const; + void perform_cut(const GLCanvas3D::Selection& selection); + double calc_projection(const Linef3& mouse_ray) const; +}; + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoCut_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp new file mode 100644 index 000000000..d72dc4913 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp @@ -0,0 +1,357 @@ +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoFlatten.hpp" + +#include + +#include + +namespace Slic3r { +namespace GUI { + + +#if ENABLE_SVG_ICONS +GLGizmoFlatten::GLGizmoFlatten(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoFlatten::GLGizmoFlatten(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS + , m_normal(Vec3d::Zero()) + , m_starting_center(Vec3d::Zero()) +{ +} + +bool GLGizmoFlatten::on_init() +{ + m_shortcut_key = WXK_CONTROL_F; + return true; +} + +std::string GLGizmoFlatten::on_get_name() const +{ + return L("Place on face [F]"); +} + +bool GLGizmoFlatten::on_is_activable(const GLCanvas3D::Selection& selection) const +{ + return selection.is_single_full_instance(); +} + +void GLGizmoFlatten::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) + { + assert(m_planes_valid); + m_normal = m_planes[m_hover_id].normal; + m_starting_center = selection.get_bounding_box().center(); + } +} + +void GLGizmoFlatten::on_render(const GLCanvas3D::Selection& selection) const +{ + ::glClear(GL_DEPTH_BUFFER_BIT); + + ::glEnable(GL_DEPTH_TEST); + ::glEnable(GL_BLEND); + + if (selection.is_single_full_instance()) + { + const Transform3d& m = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(); + ::glPushMatrix(); + ::glTranslatef(0.f, 0.f, selection.get_volume(*selection.get_volume_idxs().begin())->get_sla_shift_z()); + ::glMultMatrixd(m.data()); + if (this->is_plane_update_necessary()) + const_cast(this)->update_planes(); + for (int i = 0; i < (int)m_planes.size(); ++i) + { + if (i == m_hover_id) + ::glColor4f(0.9f, 0.9f, 0.9f, 0.75f); + else + ::glColor4f(0.9f, 0.9f, 0.9f, 0.5f); + + ::glBegin(GL_POLYGON); + for (const Vec3d& vertex : m_planes[i].vertices) + { + ::glVertex3dv(vertex.data()); + } + ::glEnd(); + } + ::glPopMatrix(); + } + + ::glEnable(GL_CULL_FACE); + ::glDisable(GL_BLEND); +} + +void GLGizmoFlatten::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glDisable(GL_DEPTH_TEST); + ::glDisable(GL_BLEND); + + if (selection.is_single_full_instance()) + { + const Transform3d& m = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(); + ::glPushMatrix(); + ::glTranslatef(0.f, 0.f, selection.get_volume(*selection.get_volume_idxs().begin())->get_sla_shift_z()); + ::glMultMatrixd(m.data()); + if (this->is_plane_update_necessary()) + const_cast(this)->update_planes(); + for (int i = 0; i < (int)m_planes.size(); ++i) + { + ::glColor3fv(picking_color_component(i).data()); + ::glBegin(GL_POLYGON); + for (const Vec3d& vertex : m_planes[i].vertices) + { + ::glVertex3dv(vertex.data()); + } + ::glEnd(); + } + ::glPopMatrix(); + } + + ::glEnable(GL_CULL_FACE); +} + +void GLGizmoFlatten::set_flattening_data(const ModelObject* model_object) +{ + m_starting_center = Vec3d::Zero(); + if (m_model_object != model_object) { + m_planes.clear(); + m_planes_valid = false; + } + m_model_object = model_object; +} + +void GLGizmoFlatten::update_planes() +{ + TriangleMesh ch; + for (const ModelVolume* vol : m_model_object->volumes) + { + if (vol->type() != ModelVolumeType::MODEL_PART) + continue; + TriangleMesh vol_ch = vol->get_convex_hull(); + vol_ch.transform(vol->get_matrix()); + ch.merge(vol_ch); + } + ch = ch.convex_hull_3d(); + m_planes.clear(); + const Transform3d& inst_matrix = m_model_object->instances.front()->get_matrix(true); + + // Following constants are used for discarding too small polygons. + const float minimal_area = 5.f; // in square mm (world coordinates) + const float minimal_side = 1.f; // mm + + // Now we'll go through all the facets and append Points of facets sharing the same normal. + // This part is still performed in mesh coordinate system. + const int num_of_facets = ch.stl.stats.number_of_facets; + std::vector facet_queue(num_of_facets, 0); + std::vector facet_visited(num_of_facets, false); + int facet_queue_cnt = 0; + const stl_normal* normal_ptr = nullptr; + while (1) { + // Find next unvisited triangle: + int facet_idx = 0; + for (; facet_idx < num_of_facets; ++ facet_idx) + if (!facet_visited[facet_idx]) { + facet_queue[facet_queue_cnt ++] = facet_idx; + facet_visited[facet_idx] = true; + normal_ptr = &ch.stl.facet_start[facet_idx].normal; + m_planes.emplace_back(); + break; + } + if (facet_idx == num_of_facets) + break; // Everything was visited already + + while (facet_queue_cnt > 0) { + int facet_idx = facet_queue[-- facet_queue_cnt]; + const stl_normal& this_normal = ch.stl.facet_start[facet_idx].normal; + if (std::abs(this_normal(0) - (*normal_ptr)(0)) < 0.001 && std::abs(this_normal(1) - (*normal_ptr)(1)) < 0.001 && std::abs(this_normal(2) - (*normal_ptr)(2)) < 0.001) { + stl_vertex* first_vertex = ch.stl.facet_start[facet_idx].vertex; + for (int j=0; j<3; ++j) + m_planes.back().vertices.emplace_back((double)first_vertex[j](0), (double)first_vertex[j](1), (double)first_vertex[j](2)); + + facet_visited[facet_idx] = true; + for (int j = 0; j < 3; ++ j) { + int neighbor_idx = ch.stl.neighbors_start[facet_idx].neighbor[j]; + if (! facet_visited[neighbor_idx]) + facet_queue[facet_queue_cnt ++] = neighbor_idx; + } + } + } + m_planes.back().normal = normal_ptr->cast(); + + // Now we'll transform all the points into world coordinates, so that the areas, angles and distances + // make real sense. + m_planes.back().vertices = transform(m_planes.back().vertices, inst_matrix); + + // if this is a just a very small triangle, remove it to speed up further calculations (it would be rejected later anyway): + if (m_planes.back().vertices.size() == 3 && + ((m_planes.back().vertices[0] - m_planes.back().vertices[1]).norm() < minimal_side + || (m_planes.back().vertices[0] - m_planes.back().vertices[2]).norm() < minimal_side + || (m_planes.back().vertices[1] - m_planes.back().vertices[2]).norm() < minimal_side)) + m_planes.pop_back(); + } + + // Let's prepare transformation of the normal vector from mesh to instance coordinates. + Geometry::Transformation t(inst_matrix); + Vec3d scaling = t.get_scaling_factor(); + t.set_scaling_factor(Vec3d(1./scaling(0), 1./scaling(1), 1./scaling(2))); + + // Now we'll go through all the polygons, transform the points into xy plane to process them: + for (unsigned int polygon_id=0; polygon_id < m_planes.size(); ++polygon_id) { + Pointf3s& polygon = m_planes[polygon_id].vertices; + const Vec3d& normal = m_planes[polygon_id].normal; + + // transform the normal according to the instance matrix: + Vec3d normal_transformed = t.get_matrix() * normal; + + // We are going to rotate about z and y to flatten the plane + Eigen::Quaterniond q; + Transform3d m = Transform3d::Identity(); + m.matrix().block(0, 0, 3, 3) = q.setFromTwoVectors(normal_transformed, Vec3d::UnitZ()).toRotationMatrix(); + polygon = transform(polygon, m); + + // Now to remove the inner points. We'll misuse Geometry::convex_hull for that, but since + // it works in fixed point representation, we will rescale the polygon to avoid overflows. + // And yes, it is a nasty thing to do. Whoever has time is free to refactor. + Vec3d bb_size = BoundingBoxf3(polygon).size(); + float sf = std::min(1./bb_size(0), 1./bb_size(1)); + Transform3d tr = Geometry::assemble_transform(Vec3d::Zero(), Vec3d::Zero(), Vec3d(sf, sf, 1.f)); + polygon = transform(polygon, tr); + polygon = Slic3r::Geometry::convex_hull(polygon); + polygon = transform(polygon, tr.inverse()); + + // Calculate area of the polygons and discard ones that are too small + float& area = m_planes[polygon_id].area; + area = 0.f; + for (unsigned int i = 0; i < polygon.size(); i++) // Shoelace formula + area += polygon[i](0)*polygon[i + 1 < polygon.size() ? i + 1 : 0](1) - polygon[i + 1 < polygon.size() ? i + 1 : 0](0)*polygon[i](1); + area = 0.5f * std::abs(area); + + bool discard = false; + if (area < minimal_area) + discard = true; + else { + // We also check the inner angles and discard polygons with angles smaller than the following threshold + const double angle_threshold = ::cos(10.0 * (double)PI / 180.0); + + for (unsigned int i = 0; i < polygon.size(); ++i) { + const Vec3d& prec = polygon[(i == 0) ? polygon.size() - 1 : i - 1]; + const Vec3d& curr = polygon[i]; + const Vec3d& next = polygon[(i == polygon.size() - 1) ? 0 : i + 1]; + + if ((prec - curr).normalized().dot((next - curr).normalized()) > angle_threshold) { + discard = true; + break; + } + } + } + + if (discard) { + m_planes.erase(m_planes.begin() + (polygon_id--)); + continue; + } + + // We will shrink the polygon a little bit so it does not touch the object edges: + Vec3d centroid = std::accumulate(polygon.begin(), polygon.end(), Vec3d(0.0, 0.0, 0.0)); + centroid /= (double)polygon.size(); + for (auto& vertex : polygon) + vertex = 0.9f*vertex + 0.1f*centroid; + + // Polygon is now simple and convex, we'll round the corners to make them look nicer. + // The algorithm takes a vertex, calculates middles of respective sides and moves the vertex + // towards their average (controlled by 'aggressivity'). This is repeated k times. + // In next iterations, the neighbours are not always taken at the middle (to increase the + // rounding effect at the corners, where we need it most). + const unsigned int k = 10; // number of iterations + const float aggressivity = 0.2f; // agressivity + const unsigned int N = polygon.size(); + std::vector> neighbours; + if (k != 0) { + Pointf3s points_out(2*k*N); // vector long enough to store the future vertices + for (unsigned int j=0; jvolumes) { + m_volumes_matrices.push_back(vol->get_matrix()); + m_volumes_types.push_back(vol->type()); + } + m_first_instance_scale = m_model_object->instances.front()->get_scaling_factor(); + m_first_instance_mirror = m_model_object->instances.front()->get_mirror(); + + m_planes_valid = true; +} + + +bool GLGizmoFlatten::is_plane_update_necessary() const +{ + if (m_state != On || !m_model_object || m_model_object->instances.empty()) + return false; + + if (! m_planes_valid || m_model_object->volumes.size() != m_volumes_matrices.size()) + return true; + + // We want to recalculate when the scale changes - some planes could (dis)appear. + if (! m_model_object->instances.front()->get_scaling_factor().isApprox(m_first_instance_scale) + || ! m_model_object->instances.front()->get_mirror().isApprox(m_first_instance_mirror)) + return true; + + for (unsigned int i=0; i < m_model_object->volumes.size(); ++i) + if (! m_model_object->volumes[i]->get_matrix().isApprox(m_volumes_matrices[i]) + || m_model_object->volumes[i]->type() != m_volumes_types[i]) + return true; + + return false; +} + +Vec3d GLGizmoFlatten::get_flattening_normal() const +{ + Vec3d out = m_normal; + m_normal = Vec3d::Zero(); + m_starting_center = Vec3d::Zero(); + return out; +} + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoFlatten.hpp b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.hpp new file mode 100644 index 000000000..c91924c5a --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoFlatten.hpp @@ -0,0 +1,67 @@ +#ifndef slic3r_GLGizmoFlatten_hpp_ +#define slic3r_GLGizmoFlatten_hpp_ + +#include "GLGizmoBase.hpp" + + +namespace Slic3r { +namespace GUI { + + +class GLGizmoFlatten : public GLGizmoBase +{ +// This gizmo does not use grabbers. The m_hover_id relates to polygon managed by the class itself. + +private: + mutable Vec3d m_normal; + + struct PlaneData { + std::vector vertices; + Vec3d normal; + float area; + }; + + // This holds information to decide whether recalculation is necessary: + std::vector m_volumes_matrices; + std::vector m_volumes_types; + Vec3d m_first_instance_scale; + Vec3d m_first_instance_mirror; + + std::vector m_planes; + bool m_planes_valid = false; + mutable Vec3d m_starting_center; + const ModelObject* m_model_object = nullptr; + std::vector instances_matrices; + + void update_planes(); + bool is_plane_update_necessary() const; + +public: +#if ENABLE_SVG_ICONS + GLGizmoFlatten(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoFlatten(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + + void set_flattening_data(const ModelObject* model_object); + Vec3d get_flattening_normal() const; + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const; + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) {} + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + virtual void on_set_state() + { + if (m_state == On && is_plane_update_necessary()) + update_planes(); + } +}; + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoFlatten_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoMove.cpp b/src/slic3r/GUI/Gizmos/GLGizmoMove.cpp new file mode 100644 index 000000000..d18d71c83 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoMove.cpp @@ -0,0 +1,255 @@ +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoMove.hpp" + +#include + + +namespace Slic3r { +namespace GUI { + +const double GLGizmoMove3D::Offset = 10.0; + +#if ENABLE_SVG_ICONS +GLGizmoMove3D::GLGizmoMove3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoMove3D::GLGizmoMove3D(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS + , m_displacement(Vec3d::Zero()) + , m_snap_step(1.0) + , m_starting_drag_position(Vec3d::Zero()) + , m_starting_box_center(Vec3d::Zero()) + , m_starting_box_bottom_center(Vec3d::Zero()) + , m_quadric(nullptr) +{ + m_quadric = ::gluNewQuadric(); + if (m_quadric != nullptr) + ::gluQuadricDrawStyle(m_quadric, GLU_FILL); +} + +GLGizmoMove3D::~GLGizmoMove3D() +{ + if (m_quadric != nullptr) + ::gluDeleteQuadric(m_quadric); +} + +bool GLGizmoMove3D::on_init() +{ + for (int i = 0; i < 3; ++i) + { + m_grabbers.push_back(Grabber()); + } + + m_shortcut_key = WXK_CONTROL_M; + + return true; +} + +std::string GLGizmoMove3D::on_get_name() const +{ + return L("Move [M]"); +} + +void GLGizmoMove3D::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) + { + m_displacement = Vec3d::Zero(); + const BoundingBoxf3& box = selection.get_bounding_box(); + m_starting_drag_position = m_grabbers[m_hover_id].center; + m_starting_box_center = box.center(); + m_starting_box_bottom_center = box.center(); + m_starting_box_bottom_center(2) = box.min(2); + } +} + +void GLGizmoMove3D::on_stop_dragging() +{ + m_displacement = Vec3d::Zero(); +} + +void GLGizmoMove3D::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + if (m_hover_id == 0) + m_displacement(0) = calc_projection(data); + else if (m_hover_id == 1) + m_displacement(1) = calc_projection(data); + else if (m_hover_id == 2) + m_displacement(2) = calc_projection(data); +} + +void GLGizmoMove3D::on_render(const GLCanvas3D::Selection& selection) const +{ + bool show_position = selection.is_single_full_instance(); + const Vec3d& position = selection.get_bounding_box().center(); + + if ((show_position && (m_hover_id == 0)) || m_grabbers[0].dragging) + set_tooltip("X: " + format(show_position ? position(0) : m_displacement(0), 2)); + else if (!m_grabbers[0].dragging && (m_hover_id == 0)) + set_tooltip("X"); + else if ((show_position && (m_hover_id == 1)) || m_grabbers[1].dragging) + set_tooltip("Y: " + format(show_position ? position(1) : m_displacement(1), 2)); + else if (!m_grabbers[1].dragging && (m_hover_id == 1)) + set_tooltip("Y"); + else if ((show_position && (m_hover_id == 2)) || m_grabbers[2].dragging) + set_tooltip("Z: " + format(show_position ? position(2) : m_displacement(2), 2)); + else if (!m_grabbers[2].dragging && (m_hover_id == 2)) + set_tooltip("Z"); + + ::glClear(GL_DEPTH_BUFFER_BIT); + ::glEnable(GL_DEPTH_TEST); + + const BoundingBoxf3& box = selection.get_bounding_box(); + const Vec3d& center = box.center(); + + // x axis + m_grabbers[0].center = Vec3d(box.max(0) + Offset, center(1), center(2)); + ::memcpy((void*)m_grabbers[0].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); + + // y axis + m_grabbers[1].center = Vec3d(center(0), box.max(1) + Offset, center(2)); + ::memcpy((void*)m_grabbers[1].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); + + // z axis + m_grabbers[2].center = Vec3d(center(0), center(1), box.max(2) + Offset); + ::memcpy((void*)m_grabbers[2].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); + + ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); + + if (m_hover_id == -1) + { + // draw axes + for (unsigned int i = 0; i < 3; ++i) + { + if (m_grabbers[i].enabled) + { + ::glColor3fv(AXES_COLOR[i]); + ::glBegin(GL_LINES); + ::glVertex3dv(center.data()); + ::glVertex3dv(m_grabbers[i].center.data()); + ::glEnd(); + } + } + + // draw grabbers + render_grabbers(box); + for (unsigned int i = 0; i < 3; ++i) + { + if (m_grabbers[i].enabled) + render_grabber_extension((Axis)i, box, false); + } + } + else + { + // draw axis + ::glColor3fv(AXES_COLOR[m_hover_id]); + ::glBegin(GL_LINES); + ::glVertex3dv(center.data()); + ::glVertex3dv(m_grabbers[m_hover_id].center.data()); + ::glEnd(); + + // draw grabber + m_grabbers[m_hover_id].render(true, box.max_size()); + render_grabber_extension((Axis)m_hover_id, box, false); + } +} + +void GLGizmoMove3D::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glDisable(GL_DEPTH_TEST); + + const BoundingBoxf3& box = selection.get_bounding_box(); + render_grabbers_for_picking(box); + render_grabber_extension(X, box, true); + render_grabber_extension(Y, box, true); + render_grabber_extension(Z, box, true); +} + +void GLGizmoMove3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) +{ +#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI + bool show_position = selection.is_single_full_instance(); + const Vec3d& position = selection.get_bounding_box().center(); + + Vec3d displacement = show_position ? position : m_displacement; + wxString label = show_position ? _(L("Position (mm)")) : _(L("Displacement (mm)")); + + m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); + m_imgui->set_next_window_bg_alpha(0.5f); + m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); + m_imgui->input_vec3("", displacement, 100.0f, "%.2f"); + + m_imgui->end(); +#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI +} + +double GLGizmoMove3D::calc_projection(const UpdateData& data) const +{ + double projection = 0.0; + + Vec3d starting_vec = m_starting_drag_position - m_starting_box_center; + double len_starting_vec = starting_vec.norm(); + if (len_starting_vec != 0.0) + { + Vec3d mouse_dir = data.mouse_ray.unit_vector(); + // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position + // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form + // in our case plane normal and ray direction are the same (orthogonal view) + // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal + Vec3d inters = data.mouse_ray.a + (m_starting_drag_position - data.mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; + // vector from the starting position to the found intersection + Vec3d inters_vec = inters - m_starting_drag_position; + + // finds projection of the vector along the staring direction + projection = inters_vec.dot(starting_vec.normalized()); + } + + if (data.shift_down) + projection = m_snap_step * (double)std::round(projection / m_snap_step); + + return projection; +} + +void GLGizmoMove3D::render_grabber_extension(Axis axis, const BoundingBoxf3& box, bool picking) const +{ + if (m_quadric == nullptr) + return; + + double size = m_dragging ? (double)m_grabbers[axis].get_dragging_half_size((float)box.max_size()) : (double)m_grabbers[axis].get_half_size((float)box.max_size()); + + float color[3]; + ::memcpy((void*)color, (const void*)m_grabbers[axis].color, 3 * sizeof(float)); + if (!picking && (m_hover_id != -1)) + { + color[0] = 1.0f - color[0]; + color[1] = 1.0f - color[1]; + color[2] = 1.0f - color[2]; + } + + if (!picking) + ::glEnable(GL_LIGHTING); + + ::glColor3fv(color); + ::glPushMatrix(); + ::glTranslated(m_grabbers[axis].center(0), m_grabbers[axis].center(1), m_grabbers[axis].center(2)); + if (axis == X) + ::glRotated(90.0, 0.0, 1.0, 0.0); + else if (axis == Y) + ::glRotated(-90.0, 1.0, 0.0, 0.0); + + ::glTranslated(0.0, 0.0, 2.0 * size); + ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); + ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); + ::gluQuadricOrientation(m_quadric, GLU_INSIDE); + ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); + ::glPopMatrix(); + + if (!picking) + ::glDisable(GL_LIGHTING); +} + + + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoMove.hpp b/src/slic3r/GUI/Gizmos/GLGizmoMove.hpp new file mode 100644 index 000000000..d4d97de7f --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoMove.hpp @@ -0,0 +1,57 @@ +#ifndef slic3r_GLGizmoMove_hpp_ +#define slic3r_GLGizmoMove_hpp_ + +#include "GLGizmoBase.hpp" + + +namespace Slic3r { +namespace GUI { + +class GLGizmoMove3D : public GLGizmoBase +{ + static const double Offset; + + Vec3d m_displacement; + + double m_snap_step; + + Vec3d m_starting_drag_position; + Vec3d m_starting_box_center; + Vec3d m_starting_box_bottom_center; + + GLUquadricObj* m_quadric; + +public: +#if ENABLE_SVG_ICONS + GLGizmoMove3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoMove3D(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + virtual ~GLGizmoMove3D(); + + double get_snap_step(double step) const { return m_snap_step; } + void set_snap_step(double step) { m_snap_step = step; } + + const Vec3d& get_displacement() const { return m_displacement; } + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const; + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_stop_dragging(); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); + +private: + double calc_projection(const UpdateData& data) const; + void render_grabber_extension(Axis axis, const BoundingBoxf3& box, bool picking) const; +}; + + + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoMove_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp b/src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp new file mode 100644 index 000000000..4c6f66f4c --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp @@ -0,0 +1,503 @@ +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoRotate.hpp" + +#include + + +namespace Slic3r { +namespace GUI { + + +const float GLGizmoRotate::Offset = 5.0f; +const unsigned int GLGizmoRotate::CircleResolution = 64; +const unsigned int GLGizmoRotate::AngleResolution = 64; +const unsigned int GLGizmoRotate::ScaleStepsCount = 72; +const float GLGizmoRotate::ScaleStepRad = 2.0f * (float)PI / GLGizmoRotate::ScaleStepsCount; +const unsigned int GLGizmoRotate::ScaleLongEvery = 2; +const float GLGizmoRotate::ScaleLongTooth = 0.1f; // in percent of radius +const unsigned int GLGizmoRotate::SnapRegionsCount = 8; +const float GLGizmoRotate::GrabberOffset = 0.15f; // in percent of radius + +GLGizmoRotate::GLGizmoRotate(GLCanvas3D& parent, GLGizmoRotate::Axis axis) +#if ENABLE_SVG_ICONS + : GLGizmoBase(parent, "", -1) +#else + : GLGizmoBase(parent, -1) +#endif // ENABLE_SVG_ICONS + , m_axis(axis) + , m_angle(0.0) + , m_quadric(nullptr) + , m_center(0.0, 0.0, 0.0) + , m_radius(0.0f) + , m_snap_coarse_in_radius(0.0f) + , m_snap_coarse_out_radius(0.0f) + , m_snap_fine_in_radius(0.0f) + , m_snap_fine_out_radius(0.0f) +{ + m_quadric = ::gluNewQuadric(); + if (m_quadric != nullptr) + ::gluQuadricDrawStyle(m_quadric, GLU_FILL); +} + +GLGizmoRotate::GLGizmoRotate(const GLGizmoRotate& other) +#if ENABLE_SVG_ICONS + : GLGizmoBase(other.m_parent, other.m_icon_filename, other.m_sprite_id) +#else + : GLGizmoBase(other.m_parent, other.m_sprite_id) +#endif // ENABLE_SVG_ICONS + , m_axis(other.m_axis) + , m_angle(other.m_angle) + , m_quadric(nullptr) + , m_center(other.m_center) + , m_radius(other.m_radius) + , m_snap_coarse_in_radius(other.m_snap_coarse_in_radius) + , m_snap_coarse_out_radius(other.m_snap_coarse_out_radius) + , m_snap_fine_in_radius(other.m_snap_fine_in_radius) + , m_snap_fine_out_radius(other.m_snap_fine_out_radius) +{ + m_quadric = ::gluNewQuadric(); + if (m_quadric != nullptr) + ::gluQuadricDrawStyle(m_quadric, GLU_FILL); +} + +GLGizmoRotate::~GLGizmoRotate() +{ + if (m_quadric != nullptr) + ::gluDeleteQuadric(m_quadric); +} + +void GLGizmoRotate::set_angle(double angle) +{ + if (std::abs(angle - 2.0 * (double)PI) < EPSILON) + angle = 0.0; + + m_angle = angle; +} + +bool GLGizmoRotate::on_init() +{ + m_grabbers.push_back(Grabber()); + return true; +} + +void GLGizmoRotate::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + const BoundingBoxf3& box = selection.get_bounding_box(); + m_center = box.center(); + m_radius = Offset + box.radius(); + m_snap_coarse_in_radius = m_radius / 3.0f; + m_snap_coarse_out_radius = 2.0f * m_snap_coarse_in_radius; + m_snap_fine_in_radius = m_radius; + m_snap_fine_out_radius = m_snap_fine_in_radius + m_radius * ScaleLongTooth; +} + +void GLGizmoRotate::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + Vec2d mouse_pos = to_2d(mouse_position_in_local_plane(data.mouse_ray, selection)); + + Vec2d orig_dir = Vec2d::UnitX(); + Vec2d new_dir = mouse_pos.normalized(); + + double theta = ::acos(clamp(-1.0, 1.0, new_dir.dot(orig_dir))); + if (cross2(orig_dir, new_dir) < 0.0) + theta = 2.0 * (double)PI - theta; + + double len = mouse_pos.norm(); + + // snap to coarse snap region + if ((m_snap_coarse_in_radius <= len) && (len <= m_snap_coarse_out_radius)) + { + double step = 2.0 * (double)PI / (double)SnapRegionsCount; + theta = step * (double)std::round(theta / step); + } + else + { + // snap to fine snap region (scale) + if ((m_snap_fine_in_radius <= len) && (len <= m_snap_fine_out_radius)) + { + double step = 2.0 * (double)PI / (double)ScaleStepsCount; + theta = step * (double)std::round(theta / step); + } + } + + if (theta == 2.0 * (double)PI) + theta = 0.0; + + m_angle = theta; +} + +void GLGizmoRotate::on_render(const GLCanvas3D::Selection& selection) const +{ + if (!m_grabbers[0].enabled) + return; + + const BoundingBoxf3& box = selection.get_bounding_box(); + + std::string axis; + switch (m_axis) + { + case X: { axis = "X"; break; } + case Y: { axis = "Y"; break; } + case Z: { axis = "Z"; break; } + } + + if (!m_dragging && (m_hover_id == 0)) + set_tooltip(axis); + else if (m_dragging) + set_tooltip(axis + ": " + format((float)Geometry::rad2deg(m_angle), 4) + "\u00B0"); + else + { + m_center = box.center(); + m_radius = Offset + box.radius(); + m_snap_coarse_in_radius = m_radius / 3.0f; + m_snap_coarse_out_radius = 2.0f * m_snap_coarse_in_radius; + m_snap_fine_in_radius = m_radius; + m_snap_fine_out_radius = m_radius * (1.0f + ScaleLongTooth); + } + + ::glEnable(GL_DEPTH_TEST); + + ::glPushMatrix(); + transform_to_local(selection); + + ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); + ::glColor3fv((m_hover_id != -1) ? m_drag_color : m_highlight_color); + + render_circle(); + + if (m_hover_id != -1) + { + render_scale(); + render_snap_radii(); + render_reference_radius(); + } + + ::glColor3fv(m_highlight_color); + + if (m_hover_id != -1) + render_angle(); + + render_grabber(box); + render_grabber_extension(box, false); + + ::glPopMatrix(); +} + +void GLGizmoRotate::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glDisable(GL_DEPTH_TEST); + + ::glPushMatrix(); + + transform_to_local(selection); + + const BoundingBoxf3& box = selection.get_bounding_box(); + render_grabbers_for_picking(box); + render_grabber_extension(box, true); + + ::glPopMatrix(); +} + +void GLGizmoRotate::render_circle() const +{ + ::glBegin(GL_LINE_LOOP); + for (unsigned int i = 0; i < ScaleStepsCount; ++i) + { + float angle = (float)i * ScaleStepRad; + float x = ::cos(angle) * m_radius; + float y = ::sin(angle) * m_radius; + float z = 0.0f; + ::glVertex3f((GLfloat)x, (GLfloat)y, (GLfloat)z); + } + ::glEnd(); +} + +void GLGizmoRotate::render_scale() const +{ + float out_radius_long = m_snap_fine_out_radius; + float out_radius_short = m_radius * (1.0f + 0.5f * ScaleLongTooth); + + ::glBegin(GL_LINES); + for (unsigned int i = 0; i < ScaleStepsCount; ++i) + { + float angle = (float)i * ScaleStepRad; + float cosa = ::cos(angle); + float sina = ::sin(angle); + float in_x = cosa * m_radius; + float in_y = sina * m_radius; + float in_z = 0.0f; + float out_x = (i % ScaleLongEvery == 0) ? cosa * out_radius_long : cosa * out_radius_short; + float out_y = (i % ScaleLongEvery == 0) ? sina * out_radius_long : sina * out_radius_short; + float out_z = 0.0f; + ::glVertex3f((GLfloat)in_x, (GLfloat)in_y, (GLfloat)in_z); + ::glVertex3f((GLfloat)out_x, (GLfloat)out_y, (GLfloat)out_z); + } + ::glEnd(); +} + +void GLGizmoRotate::render_snap_radii() const +{ + float step = 2.0f * (float)PI / (float)SnapRegionsCount; + + float in_radius = m_radius / 3.0f; + float out_radius = 2.0f * in_radius; + + ::glBegin(GL_LINES); + for (unsigned int i = 0; i < SnapRegionsCount; ++i) + { + float angle = (float)i * step; + float cosa = ::cos(angle); + float sina = ::sin(angle); + float in_x = cosa * in_radius; + float in_y = sina * in_radius; + float in_z = 0.0f; + float out_x = cosa * out_radius; + float out_y = sina * out_radius; + float out_z = 0.0f; + ::glVertex3f((GLfloat)in_x, (GLfloat)in_y, (GLfloat)in_z); + ::glVertex3f((GLfloat)out_x, (GLfloat)out_y, (GLfloat)out_z); + } + ::glEnd(); +} + +void GLGizmoRotate::render_reference_radius() const +{ + ::glBegin(GL_LINES); + ::glVertex3f(0.0f, 0.0f, 0.0f); + ::glVertex3f((GLfloat)(m_radius * (1.0f + GrabberOffset)), 0.0f, 0.0f); + ::glEnd(); +} + +void GLGizmoRotate::render_angle() const +{ + float step_angle = (float)m_angle / AngleResolution; + float ex_radius = m_radius * (1.0f + GrabberOffset); + + ::glBegin(GL_LINE_STRIP); + for (unsigned int i = 0; i <= AngleResolution; ++i) + { + float angle = (float)i * step_angle; + float x = ::cos(angle) * ex_radius; + float y = ::sin(angle) * ex_radius; + float z = 0.0f; + ::glVertex3f((GLfloat)x, (GLfloat)y, (GLfloat)z); + } + ::glEnd(); +} + +void GLGizmoRotate::render_grabber(const BoundingBoxf3& box) const +{ + double grabber_radius = (double)m_radius * (1.0 + (double)GrabberOffset); + m_grabbers[0].center = Vec3d(::cos(m_angle) * grabber_radius, ::sin(m_angle) * grabber_radius, 0.0); + m_grabbers[0].angles(2) = m_angle; + + ::glColor3fv((m_hover_id != -1) ? m_drag_color : m_highlight_color); + + ::glBegin(GL_LINES); + ::glVertex3f(0.0f, 0.0f, 0.0f); + ::glVertex3dv(m_grabbers[0].center.data()); + ::glEnd(); + + ::memcpy((void*)m_grabbers[0].color, (const void*)m_highlight_color, 3 * sizeof(float)); + render_grabbers(box); +} + +void GLGizmoRotate::render_grabber_extension(const BoundingBoxf3& box, bool picking) const +{ + if (m_quadric == nullptr) + return; + + double size = m_dragging ? (double)m_grabbers[0].get_dragging_half_size((float)box.max_size()) : (double)m_grabbers[0].get_half_size((float)box.max_size()); + + float color[3]; + ::memcpy((void*)color, (const void*)m_grabbers[0].color, 3 * sizeof(float)); + if (!picking && (m_hover_id != -1)) + { + color[0] = 1.0f - color[0]; + color[1] = 1.0f - color[1]; + color[2] = 1.0f - color[2]; + } + + if (!picking) + ::glEnable(GL_LIGHTING); + + ::glColor3fv(color); + ::glPushMatrix(); + ::glTranslated(m_grabbers[0].center(0), m_grabbers[0].center(1), m_grabbers[0].center(2)); + ::glRotated(Geometry::rad2deg(m_angle), 0.0, 0.0, 1.0); + ::glRotated(90.0, 1.0, 0.0, 0.0); + ::glTranslated(0.0, 0.0, 2.0 * size); + ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); + ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); + ::gluQuadricOrientation(m_quadric, GLU_INSIDE); + ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); + ::glPopMatrix(); + ::glPushMatrix(); + ::glTranslated(m_grabbers[0].center(0), m_grabbers[0].center(1), m_grabbers[0].center(2)); + ::glRotated(Geometry::rad2deg(m_angle), 0.0, 0.0, 1.0); + ::glRotated(-90.0, 1.0, 0.0, 0.0); + ::glTranslated(0.0, 0.0, 2.0 * size); + ::gluQuadricOrientation(m_quadric, GLU_OUTSIDE); + ::gluCylinder(m_quadric, 0.75 * size, 0.0, 3.0 * size, 36, 1); + ::gluQuadricOrientation(m_quadric, GLU_INSIDE); + ::gluDisk(m_quadric, 0.0, 0.75 * size, 36, 1); + ::glPopMatrix(); + + if (!picking) + ::glDisable(GL_LIGHTING); +} + +void GLGizmoRotate::transform_to_local(const GLCanvas3D::Selection& selection) const +{ + ::glTranslated(m_center(0), m_center(1), m_center(2)); + + if (selection.is_single_volume() || selection.is_single_modifier() || selection.requires_local_axes()) + { + Transform3d orient_matrix = selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(true, false, true, true); + ::glMultMatrixd(orient_matrix.data()); + } + + switch (m_axis) + { + case X: + { + ::glRotatef(90.0f, 0.0f, 1.0f, 0.0f); + ::glRotatef(-90.0f, 0.0f, 0.0f, 1.0f); + break; + } + case Y: + { + ::glRotatef(-90.0f, 0.0f, 0.0f, 1.0f); + ::glRotatef(-90.0f, 0.0f, 1.0f, 0.0f); + break; + } + default: + case Z: + { + // no rotation + break; + } + } +} + +Vec3d GLGizmoRotate::mouse_position_in_local_plane(const Linef3& mouse_ray, const GLCanvas3D::Selection& selection) const +{ + double half_pi = 0.5 * (double)PI; + + Transform3d m = Transform3d::Identity(); + + switch (m_axis) + { + case X: + { + m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitZ())); + m.rotate(Eigen::AngleAxisd(-half_pi, Vec3d::UnitY())); + break; + } + case Y: + { + m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitY())); + m.rotate(Eigen::AngleAxisd(half_pi, Vec3d::UnitZ())); + break; + } + default: + case Z: + { + // no rotation applied + break; + } + } + + if (selection.is_single_volume() || selection.is_single_modifier() || selection.requires_local_axes()) + m = m * selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_transformation().get_matrix(true, false, true, true).inverse(); + + m.translate(-m_center); + + return transform(mouse_ray, m).intersect_plane(0.0); +} + +#if ENABLE_SVG_ICONS +GLGizmoRotate3D::GLGizmoRotate3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoRotate3D::GLGizmoRotate3D(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS +{ + m_gizmos.emplace_back(parent, GLGizmoRotate::X); + m_gizmos.emplace_back(parent, GLGizmoRotate::Y); + m_gizmos.emplace_back(parent, GLGizmoRotate::Z); + + for (unsigned int i = 0; i < 3; ++i) + { + m_gizmos[i].set_group_id(i); + } +} + +bool GLGizmoRotate3D::on_init() +{ + for (GLGizmoRotate& g : m_gizmos) + { + if (!g.init()) + return false; + } + + for (unsigned int i = 0; i < 3; ++i) + { + m_gizmos[i].set_highlight_color(AXES_COLOR[i]); + } + + m_shortcut_key = WXK_CONTROL_R; + + return true; +} + +std::string GLGizmoRotate3D::on_get_name() const +{ + return L("Rotate [R]"); +} + +void GLGizmoRotate3D::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if ((0 <= m_hover_id) && (m_hover_id < 3)) + m_gizmos[m_hover_id].start_dragging(selection); +} + +void GLGizmoRotate3D::on_stop_dragging() +{ + if ((0 <= m_hover_id) && (m_hover_id < 3)) + m_gizmos[m_hover_id].stop_dragging(); +} + +void GLGizmoRotate3D::on_render(const GLCanvas3D::Selection& selection) const +{ + ::glClear(GL_DEPTH_BUFFER_BIT); + + if ((m_hover_id == -1) || (m_hover_id == 0)) + m_gizmos[X].render(selection); + + if ((m_hover_id == -1) || (m_hover_id == 1)) + m_gizmos[Y].render(selection); + + if ((m_hover_id == -1) || (m_hover_id == 2)) + m_gizmos[Z].render(selection); +} + +void GLGizmoRotate3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) +{ +#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI + Vec3d rotation(Geometry::rad2deg(m_gizmos[0].get_angle()), Geometry::rad2deg(m_gizmos[1].get_angle()), Geometry::rad2deg(m_gizmos[2].get_angle())); + wxString label = _(L("Rotation (deg)")); + + m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); + m_imgui->set_next_window_bg_alpha(0.5f); + m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); + m_imgui->input_vec3("", rotation, 100.0f, "%.2f"); + m_imgui->end(); +#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI +} + + + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoRotate.hpp b/src/slic3r/GUI/Gizmos/GLGizmoRotate.hpp new file mode 100644 index 000000000..aca64c94e --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoRotate.hpp @@ -0,0 +1,142 @@ +#ifndef slic3r_GLGizmoRotate_hpp_ +#define slic3r_GLGizmoRotate_hpp_ + +#include "GLGizmoBase.hpp" + + +namespace Slic3r { +namespace GUI { + +class GLGizmoRotate : public GLGizmoBase +{ + static const float Offset; + static const unsigned int CircleResolution; + static const unsigned int AngleResolution; + static const unsigned int ScaleStepsCount; + static const float ScaleStepRad; + static const unsigned int ScaleLongEvery; + static const float ScaleLongTooth; + static const unsigned int SnapRegionsCount; + static const float GrabberOffset; + +public: + enum Axis : unsigned char + { + X, + Y, + Z + }; + +private: + Axis m_axis; + double m_angle; + + GLUquadricObj* m_quadric; + + mutable Vec3d m_center; + mutable float m_radius; + + mutable float m_snap_coarse_in_radius; + mutable float m_snap_coarse_out_radius; + mutable float m_snap_fine_in_radius; + mutable float m_snap_fine_out_radius; + +public: + GLGizmoRotate(GLCanvas3D& parent, Axis axis); + GLGizmoRotate(const GLGizmoRotate& other); + virtual ~GLGizmoRotate(); + + double get_angle() const { return m_angle; } + void set_angle(double angle); + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const { return ""; } + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + +private: + void render_circle() const; + void render_scale() const; + void render_snap_radii() const; + void render_reference_radius() const; + void render_angle() const; + void render_grabber(const BoundingBoxf3& box) const; + void render_grabber_extension(const BoundingBoxf3& box, bool picking) const; + + void transform_to_local(const GLCanvas3D::Selection& selection) const; + // returns the intersection of the mouse ray with the plane perpendicular to the gizmo axis, in local coordinate + Vec3d mouse_position_in_local_plane(const Linef3& mouse_ray, const GLCanvas3D::Selection& selection) const; +}; + +class GLGizmoRotate3D : public GLGizmoBase +{ + std::vector m_gizmos; + +public: +#if ENABLE_SVG_ICONS + GLGizmoRotate3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoRotate3D(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + + Vec3d get_rotation() const { return Vec3d(m_gizmos[X].get_angle(), m_gizmos[Y].get_angle(), m_gizmos[Z].get_angle()); } + void set_rotation(const Vec3d& rotation) { m_gizmos[X].set_angle(rotation(0)); m_gizmos[Y].set_angle(rotation(1)); m_gizmos[Z].set_angle(rotation(2)); } + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const; + virtual void on_set_state() + { + for (GLGizmoRotate& g : m_gizmos) + { + g.set_state(m_state); + } + } + virtual void on_set_hover_id() + { + for (unsigned int i = 0; i < 3; ++i) + { + m_gizmos[i].set_hover_id((m_hover_id == i) ? 0 : -1); + } + } + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return !selection.is_wipe_tower(); } + virtual void on_enable_grabber(unsigned int id) + { + if ((0 <= id) && (id < 3)) + m_gizmos[id].enable_grabber(0); + } + virtual void on_disable_grabber(unsigned int id) + { + if ((0 <= id) && (id < 3)) + m_gizmos[id].disable_grabber(0); + } + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_stop_dragging(); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) + { + for (GLGizmoRotate& g : m_gizmos) + { + g.update(data, selection); + } + } + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const + { + for (const GLGizmoRotate& g : m_gizmos) + { + g.render_for_picking(selection); + } + } + + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); +}; + + + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoRotate_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoScale.cpp b/src/slic3r/GUI/Gizmos/GLGizmoScale.cpp new file mode 100644 index 000000000..acc44e00d --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoScale.cpp @@ -0,0 +1,362 @@ + + +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoScale.hpp" + +#include + +namespace Slic3r { +namespace GUI { + + +const float GLGizmoScale3D::Offset = 5.0f; + +#if ENABLE_SVG_ICONS +GLGizmoScale3D::GLGizmoScale3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoScale3D::GLGizmoScale3D(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS + , m_scale(Vec3d::Ones()) + , m_snap_step(0.05) + , m_starting_scale(Vec3d::Ones()) +{ +} + +bool GLGizmoScale3D::on_init() +{ + for (int i = 0; i < 10; ++i) + { + m_grabbers.push_back(Grabber()); + } + + double half_pi = 0.5 * (double)PI; + + // x axis + m_grabbers[0].angles(1) = half_pi; + m_grabbers[1].angles(1) = half_pi; + + // y axis + m_grabbers[2].angles(0) = half_pi; + m_grabbers[3].angles(0) = half_pi; + + m_shortcut_key = WXK_CONTROL_S; + + return true; +} + +std::string GLGizmoScale3D::on_get_name() const +{ + return L("Scale [S]"); +} + +void GLGizmoScale3D::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) + { + m_starting_drag_position = m_grabbers[m_hover_id].center; + m_starting_box = selection.get_bounding_box(); + } +} + +void GLGizmoScale3D::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + if ((m_hover_id == 0) || (m_hover_id == 1)) + do_scale_x(data); + else if ((m_hover_id == 2) || (m_hover_id == 3)) + do_scale_y(data); + else if ((m_hover_id == 4) || (m_hover_id == 5)) + do_scale_z(data); + else if (m_hover_id >= 6) + do_scale_uniform(data); +} + +void GLGizmoScale3D::on_render(const GLCanvas3D::Selection& selection) const +{ + bool single_instance = selection.is_single_full_instance(); + bool single_volume = selection.is_single_modifier() || selection.is_single_volume(); + bool single_selection = single_instance || single_volume; + + Vec3f scale = 100.0f * Vec3f::Ones(); + if (single_instance) + scale = 100.0f * selection.get_volume(*selection.get_volume_idxs().begin())->get_instance_scaling_factor().cast(); + else if (single_volume) + scale = 100.0f * selection.get_volume(*selection.get_volume_idxs().begin())->get_volume_scaling_factor().cast(); + + if ((single_selection && ((m_hover_id == 0) || (m_hover_id == 1))) || m_grabbers[0].dragging || m_grabbers[1].dragging) + set_tooltip("X: " + format(scale(0), 4) + "%"); + else if (!m_grabbers[0].dragging && !m_grabbers[1].dragging && ((m_hover_id == 0) || (m_hover_id == 1))) + set_tooltip("X"); + else if ((single_selection && ((m_hover_id == 2) || (m_hover_id == 3))) || m_grabbers[2].dragging || m_grabbers[3].dragging) + set_tooltip("Y: " + format(scale(1), 4) + "%"); + else if (!m_grabbers[2].dragging && !m_grabbers[3].dragging && ((m_hover_id == 2) || (m_hover_id == 3))) + set_tooltip("Y"); + else if ((single_selection && ((m_hover_id == 4) || (m_hover_id == 5))) || m_grabbers[4].dragging || m_grabbers[5].dragging) + set_tooltip("Z: " + format(scale(2), 4) + "%"); + else if (!m_grabbers[4].dragging && !m_grabbers[5].dragging && ((m_hover_id == 4) || (m_hover_id == 5))) + set_tooltip("Z"); + else if ((single_selection && ((m_hover_id == 6) || (m_hover_id == 7) || (m_hover_id == 8) || (m_hover_id == 9))) + || m_grabbers[6].dragging || m_grabbers[7].dragging || m_grabbers[8].dragging || m_grabbers[9].dragging) + { + std::string tooltip = "X: " + format(scale(0), 4) + "%\n"; + tooltip += "Y: " + format(scale(1), 4) + "%\n"; + tooltip += "Z: " + format(scale(2), 4) + "%"; + set_tooltip(tooltip); + } + else if (!m_grabbers[6].dragging && !m_grabbers[7].dragging && !m_grabbers[8].dragging && !m_grabbers[9].dragging && + ((m_hover_id == 6) || (m_hover_id == 7) || (m_hover_id == 8) || (m_hover_id == 9))) + set_tooltip("X/Y/Z"); + + ::glClear(GL_DEPTH_BUFFER_BIT); + ::glEnable(GL_DEPTH_TEST); + + BoundingBoxf3 box; + Transform3d transform = Transform3d::Identity(); + Vec3d angles = Vec3d::Zero(); + Transform3d offsets_transform = Transform3d::Identity(); + + Vec3d grabber_size = Vec3d::Zero(); + + if (single_instance) + { + // calculate bounding box in instance local reference system + const GLCanvas3D::Selection::IndicesList& idxs = selection.get_volume_idxs(); + for (unsigned int idx : idxs) + { + const GLVolume* vol = selection.get_volume(idx); + box.merge(vol->bounding_box.transformed(vol->get_volume_transformation().get_matrix())); + } + + // gets transform from first selected volume + const GLVolume* v = selection.get_volume(*idxs.begin()); + transform = v->get_instance_transformation().get_matrix(); + // gets angles from first selected volume + angles = v->get_instance_rotation(); + // consider rotation+mirror only components of the transform for offsets + offsets_transform = Geometry::assemble_transform(Vec3d::Zero(), angles, Vec3d::Ones(), v->get_instance_mirror()); + grabber_size = v->get_instance_transformation().get_matrix(true, true, false, true) * box.size(); + } + else if (single_volume) + { + const GLVolume* v = selection.get_volume(*selection.get_volume_idxs().begin()); + box = v->bounding_box; + transform = v->world_matrix(); + angles = Geometry::extract_euler_angles(transform); + // consider rotation+mirror only components of the transform for offsets + offsets_transform = Geometry::assemble_transform(Vec3d::Zero(), angles, Vec3d::Ones(), v->get_instance_mirror()); + grabber_size = v->get_volume_transformation().get_matrix(true, true, false, true) * box.size(); + } + else + { + box = selection.get_bounding_box(); + grabber_size = box.size(); + } + + m_box = box; + + const Vec3d& center = m_box.center(); + Vec3d offset_x = offsets_transform * Vec3d((double)Offset, 0.0, 0.0); + Vec3d offset_y = offsets_transform * Vec3d(0.0, (double)Offset, 0.0); + Vec3d offset_z = offsets_transform * Vec3d(0.0, 0.0, (double)Offset); + + // x axis + m_grabbers[0].center = transform * Vec3d(m_box.min(0), center(1), center(2)) - offset_x; + m_grabbers[1].center = transform * Vec3d(m_box.max(0), center(1), center(2)) + offset_x; + ::memcpy((void*)m_grabbers[0].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); + ::memcpy((void*)m_grabbers[1].color, (const void*)&AXES_COLOR[0], 3 * sizeof(float)); + + // y axis + m_grabbers[2].center = transform * Vec3d(center(0), m_box.min(1), center(2)) - offset_y; + m_grabbers[3].center = transform * Vec3d(center(0), m_box.max(1), center(2)) + offset_y; + ::memcpy((void*)m_grabbers[2].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); + ::memcpy((void*)m_grabbers[3].color, (const void*)&AXES_COLOR[1], 3 * sizeof(float)); + + // z axis + m_grabbers[4].center = transform * Vec3d(center(0), center(1), m_box.min(2)) - offset_z; + m_grabbers[5].center = transform * Vec3d(center(0), center(1), m_box.max(2)) + offset_z; + ::memcpy((void*)m_grabbers[4].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); + ::memcpy((void*)m_grabbers[5].color, (const void*)&AXES_COLOR[2], 3 * sizeof(float)); + + // uniform + m_grabbers[6].center = transform * Vec3d(m_box.min(0), m_box.min(1), center(2)) - offset_x - offset_y; + m_grabbers[7].center = transform * Vec3d(m_box.max(0), m_box.min(1), center(2)) + offset_x - offset_y; + m_grabbers[8].center = transform * Vec3d(m_box.max(0), m_box.max(1), center(2)) + offset_x + offset_y; + m_grabbers[9].center = transform * Vec3d(m_box.min(0), m_box.max(1), center(2)) - offset_x + offset_y; + for (int i = 6; i < 10; ++i) + { + ::memcpy((void*)m_grabbers[i].color, (const void*)m_highlight_color, 3 * sizeof(float)); + } + + // sets grabbers orientation + for (int i = 0; i < 10; ++i) + { + m_grabbers[i].angles = angles; + } + + ::glLineWidth((m_hover_id != -1) ? 2.0f : 1.5f); + + float grabber_mean_size = (float)(grabber_size(0) + grabber_size(1) + grabber_size(2)) / 3.0f; + + if (m_hover_id == -1) + { + // draw connections + if (m_grabbers[0].enabled && m_grabbers[1].enabled) + { + ::glColor3fv(m_grabbers[0].color); + render_grabbers_connection(0, 1); + } + if (m_grabbers[2].enabled && m_grabbers[3].enabled) + { + ::glColor3fv(m_grabbers[2].color); + render_grabbers_connection(2, 3); + } + if (m_grabbers[4].enabled && m_grabbers[5].enabled) + { + ::glColor3fv(m_grabbers[4].color); + render_grabbers_connection(4, 5); + } + ::glColor3fv(m_base_color); + render_grabbers_connection(6, 7); + render_grabbers_connection(7, 8); + render_grabbers_connection(8, 9); + render_grabbers_connection(9, 6); + // draw grabbers + render_grabbers(grabber_mean_size); + } + else if ((m_hover_id == 0) || (m_hover_id == 1)) + { + // draw connection + ::glColor3fv(m_grabbers[0].color); + render_grabbers_connection(0, 1); + // draw grabbers + m_grabbers[0].render(true, grabber_mean_size); + m_grabbers[1].render(true, grabber_mean_size); + } + else if ((m_hover_id == 2) || (m_hover_id == 3)) + { + // draw connection + ::glColor3fv(m_grabbers[2].color); + render_grabbers_connection(2, 3); + // draw grabbers + m_grabbers[2].render(true, grabber_mean_size); + m_grabbers[3].render(true, grabber_mean_size); + } + else if ((m_hover_id == 4) || (m_hover_id == 5)) + { + // draw connection + ::glColor3fv(m_grabbers[4].color); + render_grabbers_connection(4, 5); + // draw grabbers + m_grabbers[4].render(true, grabber_mean_size); + m_grabbers[5].render(true, grabber_mean_size); + } + else if (m_hover_id >= 6) + { + // draw connection + ::glColor3fv(m_drag_color); + render_grabbers_connection(6, 7); + render_grabbers_connection(7, 8); + render_grabbers_connection(8, 9); + render_grabbers_connection(9, 6); + // draw grabbers + for (int i = 6; i < 10; ++i) + { + m_grabbers[i].render(true, grabber_mean_size); + } + } +} + +void GLGizmoScale3D::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glDisable(GL_DEPTH_TEST); + + render_grabbers_for_picking(selection.get_bounding_box()); +} + +void GLGizmoScale3D::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) +{ +#if !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI + bool single_instance = selection.is_single_full_instance(); + wxString label = _(L("Scale (%)")); + + m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); + m_imgui->set_next_window_bg_alpha(0.5f); + m_imgui->begin(label, ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); + m_imgui->input_vec3("", m_scale * 100.f, 100.0f, "%.2f"); + m_imgui->end(); +#endif // !DISABLE_MOVE_ROTATE_SCALE_GIZMOS_IMGUI +} + +void GLGizmoScale3D::render_grabbers_connection(unsigned int id_1, unsigned int id_2) const +{ + unsigned int grabbers_count = (unsigned int)m_grabbers.size(); + if ((id_1 < grabbers_count) && (id_2 < grabbers_count)) + { + ::glBegin(GL_LINES); + ::glVertex3dv(m_grabbers[id_1].center.data()); + ::glVertex3dv(m_grabbers[id_2].center.data()); + ::glEnd(); + } +} + +void GLGizmoScale3D::do_scale_x(const UpdateData& data) +{ + double ratio = calc_ratio(data); + if (ratio > 0.0) + m_scale(0) = m_starting_scale(0) * ratio; +} + +void GLGizmoScale3D::do_scale_y(const UpdateData& data) +{ + double ratio = calc_ratio(data); + if (ratio > 0.0) + m_scale(1) = m_starting_scale(1) * ratio; +} + +void GLGizmoScale3D::do_scale_z(const UpdateData& data) +{ + double ratio = calc_ratio(data); + if (ratio > 0.0) + m_scale(2) = m_starting_scale(2) * ratio; +} + +void GLGizmoScale3D::do_scale_uniform(const UpdateData& data) +{ + double ratio = calc_ratio(data); + if (ratio > 0.0) + m_scale = m_starting_scale * ratio; +} + +double GLGizmoScale3D::calc_ratio(const UpdateData& data) const +{ + double ratio = 0.0; + + // vector from the center to the starting position + Vec3d starting_vec = m_starting_drag_position - m_starting_box.center(); + double len_starting_vec = starting_vec.norm(); + if (len_starting_vec != 0.0) + { + Vec3d mouse_dir = data.mouse_ray.unit_vector(); + // finds the intersection of the mouse ray with the plane parallel to the camera viewport and passing throught the starting position + // use ray-plane intersection see i.e. https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection algebric form + // in our case plane normal and ray direction are the same (orthogonal view) + // when moving to perspective camera the negative z unit axis of the camera needs to be transformed in world space and used as plane normal + Vec3d inters = data.mouse_ray.a + (m_starting_drag_position - data.mouse_ray.a).dot(mouse_dir) / mouse_dir.squaredNorm() * mouse_dir; + // vector from the starting position to the found intersection + Vec3d inters_vec = inters - m_starting_drag_position; + + // finds projection of the vector along the staring direction + double proj = inters_vec.dot(starting_vec.normalized()); + + ratio = (len_starting_vec + proj) / len_starting_vec; + } + + if (data.shift_down) + ratio = m_snap_step * (double)std::round(ratio / m_snap_step); + + return ratio; +} + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoScale.hpp b/src/slic3r/GUI/Gizmos/GLGizmoScale.hpp new file mode 100644 index 000000000..8554e57a7 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoScale.hpp @@ -0,0 +1,62 @@ +#ifndef slic3r_GLGizmoScale_hpp_ +#define slic3r_GLGizmoScale_hpp_ + +#include "GLGizmoBase.hpp" + + +namespace Slic3r { +namespace GUI { + +class GLGizmoScale3D : public GLGizmoBase +{ + static const float Offset; + + mutable BoundingBoxf3 m_box; + + Vec3d m_scale; + + double m_snap_step; + + Vec3d m_starting_scale; + Vec3d m_starting_drag_position; + BoundingBoxf3 m_starting_box; + +public: +#if ENABLE_SVG_ICONS + GLGizmoScale3D(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoScale3D(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + + double get_snap_step(double step) const { return m_snap_step; } + void set_snap_step(double step) { m_snap_step = step; } + + const Vec3d& get_scale() const { return m_scale; } + void set_scale(const Vec3d& scale) { m_starting_scale = scale; m_scale = scale; } + +protected: + virtual bool on_init(); + virtual std::string on_get_name() const; + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const { return !selection.is_wipe_tower(); } + virtual void on_start_dragging(const GLCanvas3D::Selection& selection); + virtual void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection); + +private: + void render_grabbers_connection(unsigned int id_1, unsigned int id_2) const; + + void do_scale_x(const UpdateData& data); + void do_scale_y(const UpdateData& data); + void do_scale_z(const UpdateData& data); + void do_scale_uniform(const UpdateData& data); + + double calc_ratio(const UpdateData& data) const; +}; + + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoScale_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp b/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp new file mode 100644 index 000000000..695564971 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp @@ -0,0 +1,874 @@ +// Include GLGizmoBase.hpp before I18N.hpp as it includes some libigl code, which overrides our localization "L" macro. +#include "GLGizmoSlaSupports.hpp" + +#include + +#include + +#include "slic3r/GUI/GUI_App.hpp" +#include "slic3r/GUI/GUI_ObjectSettings.hpp" +#include "slic3r/GUI/GUI_ObjectList.hpp" +#include "slic3r/GUI/PresetBundle.hpp" + + +namespace Slic3r { +namespace GUI { + +#if ENABLE_SVG_ICONS +GLGizmoSlaSupports::GLGizmoSlaSupports(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id) + : GLGizmoBase(parent, icon_filename, sprite_id) +#else +GLGizmoSlaSupports::GLGizmoSlaSupports(GLCanvas3D& parent, unsigned int sprite_id) + : GLGizmoBase(parent, sprite_id) +#endif // ENABLE_SVG_ICONS + , m_starting_center(Vec3d::Zero()), m_quadric(nullptr) +{ + m_quadric = ::gluNewQuadric(); + if (m_quadric != nullptr) + // using GLU_FILL does not work when the instance's transformation + // contains mirroring (normals are reverted) + ::gluQuadricDrawStyle(m_quadric, GLU_FILL); +} + +GLGizmoSlaSupports::~GLGizmoSlaSupports() +{ + if (m_quadric != nullptr) + ::gluDeleteQuadric(m_quadric); +} + +bool GLGizmoSlaSupports::on_init() +{ + m_shortcut_key = WXK_CONTROL_L; + return true; +} + +void GLGizmoSlaSupports::set_sla_support_data(ModelObject* model_object, const GLCanvas3D::Selection& selection) +{ + m_starting_center = Vec3d::Zero(); + m_old_model_object = m_model_object; + m_model_object = model_object; + if (selection.is_empty()) + m_old_instance_id = -1; + + m_active_instance = selection.get_instance_idx(); + + if (model_object && selection.is_from_single_instance()) + { + if (is_mesh_update_necessary()) { + update_mesh(); + editing_mode_reload_cache(); + } + + if (m_model_object != m_old_model_object) + m_editing_mode = false; + + if (m_editing_mode_cache.empty() && m_model_object->sla_points_status != sla::PointsStatus::UserModified) + get_data_from_backend(); + + if (m_state == On) { + m_parent.toggle_model_objects_visibility(false); + m_parent.toggle_model_objects_visibility(true, m_model_object, m_active_instance); + } + } +} + +void GLGizmoSlaSupports::on_render(const GLCanvas3D::Selection& selection) const +{ + ::glEnable(GL_BLEND); + ::glEnable(GL_DEPTH_TEST); + + render_points(selection, false); + render_selection_rectangle(); + + ::glDisable(GL_BLEND); +} + +void GLGizmoSlaSupports::render_selection_rectangle() const +{ + if (!m_selection_rectangle_active) + return; + + ::glLineWidth(1.5f); + float render_color[3] = {1.f, 0.f, 0.f}; + ::glColor3fv(render_color); + + ::glPushAttrib(GL_TRANSFORM_BIT); // remember current MatrixMode + + ::glMatrixMode(GL_MODELVIEW); // cache modelview matrix and set to identity + ::glPushMatrix(); + ::glLoadIdentity(); + + ::glMatrixMode(GL_PROJECTION); // cache projection matrix and set to identity + ::glPushMatrix(); + ::glLoadIdentity(); + + ::glOrtho(0.f, m_canvas_width, m_canvas_height, 0.f, -1.f, 1.f); // set projection matrix so that world coords = window coords + + // render the selection rectangle (window coordinates): + ::glPushAttrib(GL_ENABLE_BIT); + ::glLineStipple(4, 0xAAAA); + ::glEnable(GL_LINE_STIPPLE); + + ::glBegin(GL_LINE_LOOP); + ::glVertex3f((GLfloat)m_selection_rectangle_start_corner(0), (GLfloat)m_selection_rectangle_start_corner(1), (GLfloat)0.5f); + ::glVertex3f((GLfloat)m_selection_rectangle_end_corner(0), (GLfloat)m_selection_rectangle_start_corner(1), (GLfloat)0.5f); + ::glVertex3f((GLfloat)m_selection_rectangle_end_corner(0), (GLfloat)m_selection_rectangle_end_corner(1), (GLfloat)0.5f); + ::glVertex3f((GLfloat)m_selection_rectangle_start_corner(0), (GLfloat)m_selection_rectangle_end_corner(1), (GLfloat)0.5f); + ::glEnd(); + ::glPopAttrib(); + + ::glPopMatrix(); // restore former projection matrix + ::glMatrixMode(GL_MODELVIEW); + ::glPopMatrix(); // restore former modelview matrix + ::glPopAttrib(); // restore former MatrixMode +} + +void GLGizmoSlaSupports::on_render_for_picking(const GLCanvas3D::Selection& selection) const +{ + ::glEnable(GL_DEPTH_TEST); + + render_points(selection, true); +} + +void GLGizmoSlaSupports::render_points(const GLCanvas3D::Selection& selection, bool picking) const +{ + if (m_quadric == nullptr || !selection.is_from_single_instance()) + return; + + if (!picking) + ::glEnable(GL_LIGHTING); + + const GLVolume* vol = selection.get_volume(*selection.get_volume_idxs().begin()); + double z_shift = vol->get_sla_shift_z(); + const Transform3d& instance_scaling_matrix_inverse = vol->get_instance_transformation().get_matrix(true, true, false, true).inverse(); + const Transform3d& instance_matrix = vol->get_instance_transformation().get_matrix(); + + ::glPushMatrix(); + ::glTranslated(0.0, 0.0, z_shift); + ::glMultMatrixd(instance_matrix.data()); + + float render_color[3]; + for (int i = 0; i < (int)m_editing_mode_cache.size(); ++i) + { + const sla::SupportPoint& support_point = m_editing_mode_cache[i].support_point; + const bool& point_selected = m_editing_mode_cache[i].selected; + + // First decide about the color of the point. + if (picking) { + std::array color = picking_color_component(i); + render_color[0] = color[0]; + render_color[1] = color[1]; + render_color[2] = color[2]; + } + else { + if ((m_hover_id == i && m_editing_mode)) { // ignore hover state unless editing mode is active + render_color[0] = 0.f; + render_color[1] = 1.0f; + render_color[2] = 1.0f; + } + else { // neigher hover nor picking + bool supports_new_island = m_lock_unique_islands && m_editing_mode_cache[i].support_point.is_new_island; + if (m_editing_mode) { + render_color[0] = point_selected ? 1.0f : (supports_new_island ? 0.3f : 0.7f); + render_color[1] = point_selected ? 0.3f : (supports_new_island ? 0.3f : 0.7f); + render_color[2] = point_selected ? 0.3f : (supports_new_island ? 1.0f : 0.7f); + } + else + for (unsigned char i=0; i<3; ++i) render_color[i] = 0.5f; + } + } + ::glColor3fv(render_color); + float render_color_emissive[4] = { 0.5f * render_color[0], 0.5f * render_color[1], 0.5f * render_color[2], 1.f}; + ::glMaterialfv(GL_FRONT, GL_EMISSION, render_color_emissive); + + // Inverse matrix of the instance scaling is applied so that the mark does not scale with the object. + ::glPushMatrix(); + ::glTranslated(support_point.pos(0), support_point.pos(1), support_point.pos(2)); + ::glMultMatrixd(instance_scaling_matrix_inverse.data()); + + // Matrices set, we can render the point mark now. + // If in editing mode, we'll also render a cone pointing to the sphere. + if (m_editing_mode) { + if (m_editing_mode_cache[i].normal == Vec3f::Zero()) + update_cache_entry_normal(i); // in case the normal is not yet cached, find and cache it + + Eigen::Quaterniond q; + q.setFromTwoVectors(Vec3d{0., 0., 1.}, instance_scaling_matrix_inverse * m_editing_mode_cache[i].normal.cast()); + Eigen::AngleAxisd aa(q); + ::glRotated(aa.angle() * (180./M_PI), aa.axis()(0), aa.axis()(1), aa.axis()(2)); + + const float cone_radius = 0.25f; // mm + const float cone_height = 0.75f; + ::glPushMatrix(); + ::glTranslatef(0.f, 0.f, m_editing_mode_cache[i].support_point.head_front_radius * RenderPointScale); + ::gluCylinder(m_quadric, 0.f, cone_radius, cone_height, 36, 1); + ::glTranslatef(0.f, 0.f, cone_height); + ::gluDisk(m_quadric, 0.0, cone_radius, 36, 1); + ::glPopMatrix(); + } + ::gluSphere(m_quadric, m_editing_mode_cache[i].support_point.head_front_radius * RenderPointScale, 64, 36); + ::glPopMatrix(); + } + + { + // Reset emissive component to zero (the default value) + float render_color_emissive[4] = { 0.f, 0.f, 0.f, 1.f }; + ::glMaterialfv(GL_FRONT, GL_EMISSION, render_color_emissive); + } + + if (!picking) + ::glDisable(GL_LIGHTING); + + ::glPopMatrix(); +} + +bool GLGizmoSlaSupports::is_mesh_update_necessary() const +{ + return ((m_state == On) && (m_model_object != nullptr) && !m_model_object->instances.empty()) + && ((m_model_object != m_old_model_object) || m_V.size()==0); + + //if (m_state != On || !m_model_object || m_model_object->instances.empty() || ! m_instance_matrix.isApprox(m_source_data.matrix)) + // return false; +} + +void GLGizmoSlaSupports::update_mesh() +{ + wxBusyCursor wait; + Eigen::MatrixXf& V = m_V; + Eigen::MatrixXi& F = m_F; + // Composite mesh of all instances in the world coordinate system. + // This mesh does not account for the possible Z up SLA offset. + TriangleMesh mesh = m_model_object->raw_mesh(); + const stl_file& stl = mesh.stl; + V.resize(3 * stl.stats.number_of_facets, 3); + F.resize(stl.stats.number_of_facets, 3); + for (unsigned int i=0; ivertex[0](0); V(3*i+0, 1) = facet->vertex[0](1); V(3*i+0, 2) = facet->vertex[0](2); + V(3*i+1, 0) = facet->vertex[1](0); V(3*i+1, 1) = facet->vertex[1](1); V(3*i+1, 2) = facet->vertex[1](2); + V(3*i+2, 0) = facet->vertex[2](0); V(3*i+2, 1) = facet->vertex[2](1); V(3*i+2, 2) = facet->vertex[2](2); + F(i, 0) = 3*i+0; + F(i, 1) = 3*i+1; + F(i, 2) = 3*i+2; + } + + m_AABB = igl::AABB(); + m_AABB.init(m_V, m_F); +} + +std::pair GLGizmoSlaSupports::unproject_on_mesh(const Vec2d& mouse_pos) +{ + // if the gizmo doesn't have the V, F structures for igl, calculate them first: + if (m_V.size() == 0) + update_mesh(); + + Eigen::Matrix viewport; + ::glGetIntegerv(GL_VIEWPORT, viewport.data()); + Eigen::Matrix modelview_matrix; + ::glGetDoublev(GL_MODELVIEW_MATRIX, modelview_matrix.data()); + Eigen::Matrix projection_matrix; + ::glGetDoublev(GL_PROJECTION_MATRIX, projection_matrix.data()); + + Vec3d point1; + Vec3d point2; + ::gluUnProject(mouse_pos(0), viewport(3)-mouse_pos(1), 0.f, modelview_matrix.data(), projection_matrix.data(), viewport.data(), &point1(0), &point1(1), &point1(2)); + ::gluUnProject(mouse_pos(0), viewport(3)-mouse_pos(1), 1.f, modelview_matrix.data(), projection_matrix.data(), viewport.data(), &point2(0), &point2(1), &point2(2)); + + igl::Hit hit; + + const GLCanvas3D::Selection& selection = m_parent.get_selection(); + const GLVolume* volume = selection.get_volume(*selection.get_volume_idxs().begin()); + double z_offset = volume->get_sla_shift_z(); + + point1(2) -= z_offset; + point2(2) -= z_offset; + + Transform3d inv = volume->get_instance_transformation().get_matrix().inverse(); + + point1 = inv * point1; + point2 = inv * point2; + + if (!m_AABB.intersect_ray(m_V, m_F, point1.cast(), (point2-point1).cast(), hit)) + throw std::invalid_argument("unproject_on_mesh(): No intersection found."); + + int fid = hit.id; // facet id + Vec3f bc(1-hit.u-hit.v, hit.u, hit.v); // barycentric coordinates of the hit + Vec3f a = (m_V.row(m_F(fid, 1)) - m_V.row(m_F(fid, 0))); + Vec3f b = (m_V.row(m_F(fid, 2)) - m_V.row(m_F(fid, 0))); + + // Calculate and return both the point and the facet normal. + return std::make_pair( + bc(0) * m_V.row(m_F(fid, 0)) + bc(1) * m_V.row(m_F(fid, 1)) + bc(2)*m_V.row(m_F(fid, 2)), + a.cross(b) + ); +} + +// Following function is called from GLCanvas3D to inform the gizmo about a mouse/keyboard event. +// The gizmo has an opportunity to react - if it does, it should return true so that the Canvas3D is +// aware that the event was reacted to and stops trying to make different sense of it. If the gizmo +// concludes that the event was not intended for it, it should return false. +bool GLGizmoSlaSupports::mouse_event(SLAGizmoEventType action, const Vec2d& mouse_position, bool shift_down) +{ + if (m_editing_mode) { + + // left down - show the selection rectangle: + if (action == SLAGizmoEventType::LeftDown && shift_down) { + if (m_hover_id == -1) { + m_selection_rectangle_active = true; + m_selection_rectangle_start_corner = mouse_position; + m_selection_rectangle_end_corner = mouse_position; + m_canvas_width = m_parent.get_canvas_size().get_width(); + m_canvas_height = m_parent.get_canvas_size().get_height(); + } + else + select_point(m_hover_id); + + return true; + } + + // dragging the selection rectangle: + if (action == SLAGizmoEventType::Dragging && m_selection_rectangle_active) { + m_selection_rectangle_end_corner = mouse_position; + return true; + } + + // mouse up without selection rectangle - place point on the mesh: + if (action == SLAGizmoEventType::LeftUp && !m_selection_rectangle_active && !shift_down) { + if (m_ignore_up_event) { + m_ignore_up_event = false; + return false; + } + + int instance_id = m_parent.get_selection().get_instance_idx(); + if (m_old_instance_id != instance_id) + { + bool something_selected = (m_old_instance_id != -1); + m_old_instance_id = instance_id; + if (something_selected) + return false; + } + if (instance_id == -1) + return false; + + // If there is some selection, don't add new point and deselect everything instead. + if (m_selection_empty) { + try { + std::pair pos_and_normal = unproject_on_mesh(mouse_position); // don't create anything if this throws + m_editing_mode_cache.emplace_back(sla::SupportPoint(pos_and_normal.first, m_new_point_head_diameter/2.f, false), false, pos_and_normal.second); + m_unsaved_changes = true; + } + catch (...) { // not clicked on object + return true; // prevents deselection of the gizmo by GLCanvas3D + } + } + else + select_point(NoPoints); + + return true; + } + + // left up with selection rectangle - select points inside the rectangle: + if ((action == SLAGizmoEventType::LeftUp || action == SLAGizmoEventType::ShiftUp) + && m_selection_rectangle_active) { + if (action == SLAGizmoEventType::ShiftUp) + m_ignore_up_event = true; + const Transform3d& instance_matrix = m_model_object->instances[m_active_instance]->get_transformation().get_matrix(); + GLint viewport[4]; + ::glGetIntegerv(GL_VIEWPORT, viewport); + GLdouble modelview_matrix[16]; + ::glGetDoublev(GL_MODELVIEW_MATRIX, modelview_matrix); + GLdouble projection_matrix[16]; + ::glGetDoublev(GL_PROJECTION_MATRIX, projection_matrix); + + const GLCanvas3D::Selection& selection = m_parent.get_selection(); + const GLVolume* volume = selection.get_volume(*selection.get_volume_idxs().begin()); + double z_offset = volume->get_sla_shift_z(); + + // bounding box created from the rectangle corners - will take care of order of the corners + BoundingBox rectangle(Points{Point(m_selection_rectangle_start_corner.cast()), Point(m_selection_rectangle_end_corner.cast())}); + + const Transform3d& instance_matrix_no_translation = volume->get_instance_transformation().get_matrix(true); + // we'll recover current look direction from the modelview matrix (in world coords)... + Vec3f direction_to_camera(modelview_matrix[2], modelview_matrix[6], modelview_matrix[10]); + // ...and transform it to model coords. + direction_to_camera = (instance_matrix_no_translation.inverse().cast() * direction_to_camera).normalized().eval(); + + // Iterate over all points, check if they're in the rectangle and if so, check that they are not obscured by the mesh: + for (unsigned int i=0; i() * support_point.pos; + pos(2) += z_offset; + GLdouble out_x, out_y, out_z; + ::gluProject((GLdouble)pos(0), (GLdouble)pos(1), (GLdouble)pos(2), modelview_matrix, projection_matrix, viewport, &out_x, &out_y, &out_z); + out_y = m_canvas_height - out_y; + + if (rectangle.contains(Point(out_x, out_y))) { + bool is_obscured = false; + // Cast a ray in the direction of the camera and look for intersection with the mesh: + std::vector hits; + // Offset the start of the ray to the front of the ball + EPSILON to account for numerical inaccuracies. + if (m_AABB.intersect_ray(m_V, m_F, support_point.pos + direction_to_camera * (support_point.head_front_radius + EPSILON), direction_to_camera, hits)) + // FIXME: the intersection could in theory be behind the camera, but as of now we only have camera direction. + // Also, the threshold is in mesh coordinates, not in actual dimensions. + if (hits.size() > 1 || hits.front().t > 0.001f) + is_obscured = true; + + if (!is_obscured) + select_point(i); + } + } + m_selection_rectangle_active = false; + return true; + } + + if (action == SLAGizmoEventType::Delete) { + // delete key pressed + delete_selected_points(); + return true; + } + + if (action == SLAGizmoEventType::ApplyChanges) { + editing_mode_apply_changes(); + return true; + } + + if (action == SLAGizmoEventType::DiscardChanges) { + editing_mode_discard_changes(); + return true; + } + + if (action == SLAGizmoEventType::RightDown) { + if (m_hover_id != -1) { + select_point(NoPoints); + select_point(m_hover_id); + delete_selected_points(); + return true; + } + return false; + } + + if (action == SLAGizmoEventType::SelectAll) { + select_point(AllPoints); + return true; + } + } + + if (!m_editing_mode) { + if (action == SLAGizmoEventType::AutomaticGeneration) { + auto_generate(); + return true; + } + + if (action == SLAGizmoEventType::ManualEditing) { + switch_to_editing_mode(); + return true; + } + } + + return false; +} + +void GLGizmoSlaSupports::delete_selected_points(bool force) +{ + for (unsigned int idx=0; idxreslice_SLA_supports(*m_model_object); + } + + select_point(NoPoints); + + //m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); +} + +void GLGizmoSlaSupports::on_update(const UpdateData& data, const GLCanvas3D::Selection& selection) +{ + if (m_editing_mode && m_hover_id != -1 && data.mouse_pos && (!m_editing_mode_cache[m_hover_id].support_point.is_new_island || !m_lock_unique_islands)) { + std::pair pos_and_normal; + try { + pos_and_normal = unproject_on_mesh(Vec2d((*data.mouse_pos)(0), (*data.mouse_pos)(1))); + } + catch (...) { return; } + m_editing_mode_cache[m_hover_id].support_point.pos = pos_and_normal.first; + m_editing_mode_cache[m_hover_id].support_point.is_new_island = false; + m_editing_mode_cache[m_hover_id].normal = pos_and_normal.second; + m_unsaved_changes = true; + // Do not update immediately, wait until the mouse is released. + // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); + } +} + +std::vector GLGizmoSlaSupports::get_config_options(const std::vector& keys) const +{ + std::vector out; + + if (!m_model_object) + return out; + + const DynamicPrintConfig& object_cfg = m_model_object->config; + const DynamicPrintConfig& print_cfg = wxGetApp().preset_bundle->sla_prints.get_edited_preset().config; + std::unique_ptr default_cfg = nullptr; + + for (const std::string& key : keys) { + if (object_cfg.has(key)) + out.push_back(object_cfg.option(key)); + else + if (print_cfg.has(key)) + out.push_back(print_cfg.option(key)); + else { // we must get it from defaults + if (default_cfg == nullptr) + default_cfg.reset(DynamicPrintConfig::new_from_defaults_keys(keys)); + out.push_back(default_cfg->option(key)); + } + } + + return out; +} + + +void GLGizmoSlaSupports::update_cache_entry_normal(unsigned int i) const +{ + int idx = 0; + Eigen::Matrix pp = m_editing_mode_cache[i].support_point.pos; + Eigen::Matrix cc; + m_AABB.squared_distance(m_V, m_F, pp, idx, cc); + Vec3f a = (m_V.row(m_F(idx, 1)) - m_V.row(m_F(idx, 0))); + Vec3f b = (m_V.row(m_F(idx, 2)) - m_V.row(m_F(idx, 0))); + m_editing_mode_cache[i].normal = a.cross(b); +} + + + +void GLGizmoSlaSupports::on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) +{ + if (!m_model_object) + return; + + bool first_run = true; // This is a hack to redraw the button when all points are removed, + // so it is not delayed until the background process finishes. +RENDER_AGAIN: + m_imgui->set_next_window_pos(x, y, ImGuiCond_Always); + + const float scaling = m_imgui->get_style_scaling(); + const ImVec2 window_size(285.f * scaling, 300.f * scaling); + ImGui::SetNextWindowPos(ImVec2(x, y - std::max(0.f, y+window_size.y-bottom_limit) )); + ImGui::SetNextWindowSize(ImVec2(window_size)); + + m_imgui->set_next_window_bg_alpha(0.5f); + m_imgui->begin(on_get_name(), ImGuiWindowFlags_NoMove | ImGuiWindowFlags_NoResize | ImGuiWindowFlags_NoCollapse); + + ImGui::PushItemWidth(100.0f); + + bool force_refresh = false; + bool remove_selected = false; + bool remove_all = false; + + if (m_editing_mode) { + m_imgui->text(_(L("Left mouse click - add point"))); + m_imgui->text(_(L("Right mouse click - remove point"))); + m_imgui->text(_(L("Shift + Left (+ drag) - select point(s)"))); + m_imgui->text(" "); // vertical gap + + float diameter_upper_cap = static_cast(wxGetApp().preset_bundle->sla_prints.get_edited_preset().config.option("support_pillar_diameter"))->value; + if (m_new_point_head_diameter > diameter_upper_cap) + m_new_point_head_diameter = diameter_upper_cap; + + m_imgui->text(_(L("Head diameter: "))); + ImGui::SameLine(); + if (ImGui::SliderFloat("", &m_new_point_head_diameter, 0.1f, diameter_upper_cap, "%.1f")) { + // value was changed + for (auto& cache_entry : m_editing_mode_cache) + if (cache_entry.selected) { + cache_entry.support_point.head_front_radius = m_new_point_head_diameter / 2.f; + m_unsaved_changes = true; + } + } + + bool changed = m_lock_unique_islands; + m_imgui->checkbox(_(L("Lock supports under new islands")), m_lock_unique_islands); + force_refresh |= changed != m_lock_unique_islands; + + m_imgui->disabled_begin(m_selection_empty); + remove_selected = m_imgui->button(_(L("Remove selected points"))); + m_imgui->disabled_end(); + + m_imgui->disabled_begin(m_editing_mode_cache.empty()); + remove_all = m_imgui->button(_(L("Remove all points"))); + m_imgui->disabled_end(); + + m_imgui->text(" "); // vertical gap + + if (m_imgui->button(_(L("Apply changes")))) { + editing_mode_apply_changes(); + force_refresh = true; + } + ImGui::SameLine(); + bool discard_changes = m_imgui->button(_(L("Discard changes"))); + if (discard_changes) { + editing_mode_discard_changes(); + force_refresh = true; + } + } + else { // not in editing mode: + ImGui::PushItemWidth(100.0f); + m_imgui->text(_(L("Minimal points distance: "))); + ImGui::SameLine(); + + std::vector opts = get_config_options({"support_points_density_relative", "support_points_minimal_distance"}); + float density = static_cast(opts[0])->value; + float minimal_point_distance = static_cast(opts[1])->value; + + bool value_changed = ImGui::SliderFloat("", &minimal_point_distance, 0.f, 20.f, "%.f mm"); + if (value_changed) + m_model_object->config.opt("support_points_minimal_distance", true)->value = minimal_point_distance; + + m_imgui->text(_(L("Support points density: "))); + ImGui::SameLine(); + if (ImGui::SliderFloat(" ", &density, 0.f, 200.f, "%.f %%")) { + value_changed = true; + m_model_object->config.opt("support_points_density_relative", true)->value = (int)density; + } + + if (value_changed) { // Update side panel + wxTheApp->CallAfter([]() { + wxGetApp().obj_settings()->UpdateAndShow(true); + wxGetApp().obj_list()->update_settings_items(); + }); + } + + bool generate = m_imgui->button(_(L("Auto-generate points [A]"))); + + if (generate) + auto_generate(); + + m_imgui->text(""); + if (m_imgui->button(_(L("Manual editing [M]")))) + switch_to_editing_mode(); + + m_imgui->disabled_begin(m_editing_mode_cache.empty()); + remove_all = m_imgui->button(_(L("Remove all points"))); + m_imgui->disabled_end(); + + m_imgui->text(""); + + m_imgui->text(m_model_object->sla_points_status == sla::PointsStatus::None ? "No points (will be autogenerated)" : + (m_model_object->sla_points_status == sla::PointsStatus::AutoGenerated ? "Autogenerated points (no modifications)" : + (m_model_object->sla_points_status == sla::PointsStatus::UserModified ? "User-modified points" : + (m_model_object->sla_points_status == sla::PointsStatus::Generating ? "Generation in progress..." : "UNKNOWN STATUS")))); + } + + m_imgui->end(); + + if (m_editing_mode != m_old_editing_state) { // user toggled between editing/non-editing mode + m_parent.toggle_sla_auxiliaries_visibility(!m_editing_mode); + force_refresh = true; + } + m_old_editing_state = m_editing_mode; + + if (remove_selected || remove_all) { + force_refresh = false; + m_parent.set_as_dirty(); + if (remove_all) + select_point(AllPoints); + delete_selected_points(remove_all); + if (remove_all && !m_editing_mode) + editing_mode_apply_changes(); + if (first_run) { + first_run = false; + goto RENDER_AGAIN; + } + } + + if (force_refresh) + m_parent.set_as_dirty(); +} + +bool GLGizmoSlaSupports::on_is_activable(const GLCanvas3D::Selection& selection) const +{ + if (wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() != ptSLA + || !selection.is_from_single_instance()) + return false; + + // Check that none of the selected volumes is outside. + const GLCanvas3D::Selection::IndicesList& list = selection.get_volume_idxs(); + for (const auto& idx : list) + if (selection.get_volume(idx)->is_outside) + return false; + + return true; +} + +bool GLGizmoSlaSupports::on_is_selectable() const +{ + return (wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() == ptSLA); +} + +std::string GLGizmoSlaSupports::on_get_name() const +{ + return L("SLA Support Points [L]"); +} + +void GLGizmoSlaSupports::on_set_state() +{ + if (m_state == On && m_old_state != On) { // the gizmo was just turned on + if (is_mesh_update_necessary()) + update_mesh(); + + // we'll now reload support points: + if (m_model_object) + editing_mode_reload_cache(); + + m_parent.toggle_model_objects_visibility(false); + if (m_model_object) + m_parent.toggle_model_objects_visibility(true, m_model_object, m_active_instance); + + // Set default head diameter from config. + const DynamicPrintConfig& cfg = wxGetApp().preset_bundle->sla_prints.get_edited_preset().config; + m_new_point_head_diameter = static_cast(cfg.option("support_head_front_diameter"))->value; + } + if (m_state == Off && m_old_state != Off) { // the gizmo was just turned Off + if (m_model_object) { + if (m_unsaved_changes) { + wxMessageDialog dlg(GUI::wxGetApp().plater(), _(L("Do you want to save your manually edited support points ?\n")), + _(L("Save changes?")), wxICON_QUESTION | wxYES | wxNO); + if (dlg.ShowModal() == wxID_YES) + editing_mode_apply_changes(); + else + editing_mode_discard_changes(); + } + } + + m_parent.toggle_model_objects_visibility(true); + m_editing_mode = false; // so it is not active next time the gizmo opens + m_editing_mode_cache.clear(); + } + m_old_state = m_state; +} + + + +void GLGizmoSlaSupports::on_start_dragging(const GLCanvas3D::Selection& selection) +{ + if (m_hover_id != -1) { + select_point(NoPoints); + select_point(m_hover_id); + } +} + + + +void GLGizmoSlaSupports::select_point(int i) +{ + if (i == AllPoints || i == NoPoints) { + for (auto& point_and_selection : m_editing_mode_cache) + point_and_selection.selected = ( i == AllPoints ); + m_selection_empty = (i == NoPoints); + + if (i == AllPoints) + m_new_point_head_diameter = m_editing_mode_cache[0].support_point.head_front_radius * 2.f; + } + else { + m_editing_mode_cache[i].selected = true; + m_selection_empty = false; + m_new_point_head_diameter = m_editing_mode_cache[i].support_point.head_front_radius * 2.f; + } +} + + + +void GLGizmoSlaSupports::editing_mode_discard_changes() +{ + m_editing_mode_cache.clear(); + for (const sla::SupportPoint& point : m_model_object->sla_support_points) + m_editing_mode_cache.emplace_back(point, false); + m_editing_mode = false; + m_unsaved_changes = false; +} + + + +void GLGizmoSlaSupports::editing_mode_apply_changes() +{ + // If there are no changes, don't touch the front-end. The data in the cache could have been + // taken from the backend and copying them to ModelObject would needlessly invalidate them. + if (m_unsaved_changes) { + m_model_object->sla_points_status = sla::PointsStatus::UserModified; + m_model_object->sla_support_points.clear(); + for (const CacheEntry& cache_entry : m_editing_mode_cache) + m_model_object->sla_support_points.push_back(cache_entry.support_point); + + // Recalculate support structures once the editing mode is left. + // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); + // m_parent.post_event(SimpleEvent(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS)); + wxGetApp().plater()->reslice_SLA_supports(*m_model_object); + } + m_editing_mode = false; + m_unsaved_changes = false; +} + + + +void GLGizmoSlaSupports::editing_mode_reload_cache() +{ + m_editing_mode_cache.clear(); + for (const sla::SupportPoint& point : m_model_object->sla_support_points) + m_editing_mode_cache.emplace_back(point, false); + + m_unsaved_changes = false; +} + + + +void GLGizmoSlaSupports::get_data_from_backend() +{ + for (const SLAPrintObject* po : m_parent.sla_print()->objects()) { + if (po->model_object()->id() == m_model_object->id() && po->is_step_done(slaposSupportPoints)) { + m_editing_mode_cache.clear(); + const std::vector& points = po->get_support_points(); + auto mat = po->trafo().inverse().cast(); + for (unsigned int i=0; isla_points_status != sla::PointsStatus::UserModified) + m_model_object->sla_points_status = sla::PointsStatus::AutoGenerated; + + break; + } + } + m_unsaved_changes = false; + + // We don't copy the data into ModelObject, as this would stop the background processing. +} + + + +void GLGizmoSlaSupports::auto_generate() +{ + wxMessageDialog dlg(GUI::wxGetApp().plater(), _(L( + "Autogeneration will erase all manually edited points.\n\n" + "Are you sure you want to do it?\n" + )), _(L("Warning")), wxICON_WARNING | wxYES | wxNO); + + if (m_model_object->sla_points_status != sla::PointsStatus::UserModified || m_editing_mode_cache.empty() || dlg.ShowModal() == wxID_YES) { + m_model_object->sla_support_points.clear(); + m_model_object->sla_points_status = sla::PointsStatus::Generating; + m_editing_mode_cache.clear(); + wxGetApp().plater()->reslice_SLA_supports(*m_model_object); + } +} + + + +void GLGizmoSlaSupports::switch_to_editing_mode() +{ + if (m_model_object->sla_points_status != sla::PointsStatus::AutoGenerated) + editing_mode_reload_cache(); + m_unsaved_changes = false; + m_editing_mode = true; +} + +} // namespace GUI +} // namespace Slic3r diff --git a/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp b/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp new file mode 100644 index 000000000..492bb85ca --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp @@ -0,0 +1,128 @@ +#ifndef slic3r_GLGizmoSlaSupports_hpp_ +#define slic3r_GLGizmoSlaSupports_hpp_ + +#include "GLGizmoBase.hpp" + +// There is an L function in igl that would be overridden by our localization macro - let's undefine it... +#undef L +#include +#include "slic3r/GUI/I18N.hpp" // ...and redefine again when we are done with the igl code + +#include "libslic3r/SLA/SLACommon.hpp" +#include "libslic3r/SLAPrint.hpp" + + +namespace Slic3r { +namespace GUI { + + +class GLGizmoSlaSupports : public GLGizmoBase +{ +private: + ModelObject* m_model_object = nullptr; + ModelObject* m_old_model_object = nullptr; + int m_active_instance = -1; + int m_old_instance_id = -1; + std::pair unproject_on_mesh(const Vec2d& mouse_pos); + + const float RenderPointScale = 1.f; + + GLUquadricObj* m_quadric; + Eigen::MatrixXf m_V; // vertices + Eigen::MatrixXi m_F; // facets indices + igl::AABB m_AABB; + + struct SourceDataSummary { + Geometry::Transformation transformation; + }; + + class CacheEntry { + public: + CacheEntry(const sla::SupportPoint& point, bool sel, const Vec3f& norm = Vec3f::Zero()) : + support_point(point), selected(sel), normal(norm) {} + + sla::SupportPoint support_point; + bool selected; // whether the point is selected + Vec3f normal; + }; + + // This holds information to decide whether recalculation is necessary: + SourceDataSummary m_source_data; + + mutable Vec3d m_starting_center; + +public: +#if ENABLE_SVG_ICONS + GLGizmoSlaSupports(GLCanvas3D& parent, const std::string& icon_filename, unsigned int sprite_id); +#else + GLGizmoSlaSupports(GLCanvas3D& parent, unsigned int sprite_id); +#endif // ENABLE_SVG_ICONS + virtual ~GLGizmoSlaSupports(); + void set_sla_support_data(ModelObject* model_object, const GLCanvas3D::Selection& selection); + bool mouse_event(SLAGizmoEventType action, const Vec2d& mouse_position, bool shift_down); + void delete_selected_points(bool force = false); + std::pair get_sla_clipping_plane() const; + +private: + bool on_init(); + void on_update(const UpdateData& data, const GLCanvas3D::Selection& selection); + virtual void on_render(const GLCanvas3D::Selection& selection) const; + virtual void on_render_for_picking(const GLCanvas3D::Selection& selection) const; + + void render_selection_rectangle() const; + void render_points(const GLCanvas3D::Selection& selection, bool picking = false) const; + bool is_mesh_update_necessary() const; + void update_mesh(); + void update_cache_entry_normal(unsigned int i) const; + + bool m_lock_unique_islands = false; + bool m_editing_mode = false; // Is editing mode active? + bool m_old_editing_state = false; // To keep track of whether the user toggled between the modes (needed for imgui refreshes). + float m_new_point_head_diameter; // Size of a new point. + float m_minimal_point_distance = 20.f; + float m_density = 100.f; + mutable std::vector m_editing_mode_cache; // a support point and whether it is currently selected + float m_clipping_plane_distance = 0.f; + + bool m_selection_rectangle_active = false; + Vec2d m_selection_rectangle_start_corner; + Vec2d m_selection_rectangle_end_corner; + bool m_ignore_up_event = false; + bool m_combo_box_open = false; // To ensure proper rendering of the imgui combobox. + bool m_unsaved_changes = false; // Are there unsaved changes in manual mode? + bool m_selection_empty = true; + EState m_old_state = Off; // to be able to see that the gizmo has just been closed (see on_set_state) + int m_canvas_width; + int m_canvas_height; + + std::vector get_config_options(const std::vector& keys) const; + + // Methods that do the model_object and editing cache synchronization, + // editing mode selection, etc: + enum { + AllPoints = -2, + NoPoints, + }; + void select_point(int i); + void editing_mode_apply_changes(); + void editing_mode_discard_changes(); + void editing_mode_reload_cache(); + void get_data_from_backend(); + void auto_generate(); + void switch_to_editing_mode(); + +protected: + void on_set_state() override; + void on_start_dragging(const GLCanvas3D::Selection& selection) override; + virtual void on_render_input_window(float x, float y, float bottom_limit, const GLCanvas3D::Selection& selection) override; + + virtual std::string on_get_name() const; + virtual bool on_is_activable(const GLCanvas3D::Selection& selection) const; + virtual bool on_is_selectable() const; +}; + + +} // namespace GUI +} // namespace Slic3r + +#endif // slic3r_GLGizmoSlaSupports_hpp_ diff --git a/src/slic3r/GUI/Gizmos/GLGizmos.hpp b/src/slic3r/GUI/Gizmos/GLGizmos.hpp new file mode 100644 index 000000000..8c5e25669 --- /dev/null +++ b/src/slic3r/GUI/Gizmos/GLGizmos.hpp @@ -0,0 +1,11 @@ +#ifndef slic3r_GLGizmos_hpp_ +#define slic3r_GLGizmos_hpp_ + +#include "slic3r/GUI/Gizmos/GLGizmoMove.hpp" +#include "slic3r/GUI/Gizmos/GLGizmoScale.hpp" +#include "slic3r/GUI/Gizmos/GLGizmoRotate.hpp" +#include "slic3r/GUI/Gizmos/GLGizmoFlatten.hpp" +#include "slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp" +#include "slic3r/GUI/Gizmos/GLGizmoCut.hpp" + +#endif //slic3r_GLGizmos_hpp_ diff --git a/src/slic3r/GUI/ImGuiWrapper.cpp b/src/slic3r/GUI/ImGuiWrapper.cpp index 9e75eb2ff..0050b6463 100644 --- a/src/slic3r/GUI/ImGuiWrapper.cpp +++ b/src/slic3r/GUI/ImGuiWrapper.cpp @@ -107,11 +107,11 @@ bool ImGuiWrapper::update_mouse_data(wxMouseEvent& evt) ImGuiIO& io = ImGui::GetIO(); io.MousePos = ImVec2((float)evt.GetX(), (float)evt.GetY()); - io.MouseDown[0] = evt.LeftDown(); - io.MouseDown[1] = evt.RightDown(); - io.MouseDown[2] = evt.MiddleDown(); + io.MouseDown[0] = evt.LeftIsDown(); + io.MouseDown[1] = evt.RightIsDown(); + io.MouseDown[2] = evt.MiddleIsDown(); - unsigned buttons = (evt.LeftDown() ? 1 : 0) | (evt.RightDown() ? 2 : 0) | (evt.MiddleDown() ? 4 : 0); + unsigned buttons = (evt.LeftIsDown() ? 1 : 0) | (evt.RightIsDown() ? 2 : 0) | (evt.MiddleIsDown() ? 4 : 0); m_mouse_buttons = buttons; new_frame(); @@ -441,6 +441,10 @@ void ImGuiWrapper::init_style() set_color(ImGuiCol_Header, COL_ORANGE_DARK); set_color(ImGuiCol_HeaderHovered, COL_ORANGE_LIGHT); set_color(ImGuiCol_HeaderActive, COL_ORANGE_LIGHT); + + // Slider + set_color(ImGuiCol_SliderGrab, COL_ORANGE_DARK); + set_color(ImGuiCol_SliderGrabActive, COL_ORANGE_LIGHT); } void ImGuiWrapper::render_draw_data(ImDrawData *draw_data) diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp index cddf081eb..d69480b28 100644 --- a/src/slic3r/GUI/MainFrame.cpp +++ b/src/slic3r/GUI/MainFrame.cpp @@ -56,7 +56,8 @@ wxFrame(NULL, wxID_ANY, SLIC3R_BUILD, wxDefaultPosition, wxDefaultSize, wxDEFAUL // initialize default width_unit according to the width of the one symbol ("x") of the current system font const wxSize size = GetTextExtent("m"); - wxGetApp().set_em_unit(size.x-1); +// wxGetApp().set_em_unit(size.x-1); + wxGetApp().set_em_unit(std::max(10, size.x - 1)); // initialize tabpanel and menubar init_tabpanel(); @@ -76,12 +77,14 @@ wxFrame(NULL, wxID_ANY, SLIC3R_BUILD, wxDefaultPosition, wxDefaultSize, wxDEFAUL sizer->SetSizeHints(this); SetSizer(sizer); Fit(); + + const wxSize min_size = wxSize(76*wxGetApp().em_unit(), 49*wxGetApp().em_unit()); #ifdef __APPLE__ // Using SetMinSize() on Mac messes up the window position in some cases // cf. https://groups.google.com/forum/#!topic/wx-users/yUKPBBfXWO0 - SetSize(wxSize(760, 490)); + SetSize(min_size/*wxSize(760, 490)*/); #else - SetMinSize(wxSize(760, 490)); + SetMinSize(min_size/*wxSize(760, 490)*/); SetSize(GetMinSize()); #endif Layout(); @@ -93,6 +96,12 @@ wxFrame(NULL, wxID_ANY, SLIC3R_BUILD, wxDefaultPosition, wxDefaultSize, wxDEFAUL return; } + // Weird things happen as the Paint messages are floating around the windows being destructed. + // Avoid the Paint messages by hiding the main window. + // Also the application closes much faster without these unnecessary screen refreshes. + // In addition, there were some crashes due to the Paint events sent to already destructed windows. + this->Show(false); + // Save the slic3r.ini.Usually the ini file is saved from "on idle" callback, // but in rare cases it may not have been called yet. wxGetApp().app_config->save(); @@ -124,7 +133,9 @@ wxFrame(NULL, wxID_ANY, SLIC3R_BUILD, wxDefaultPosition, wxDefaultSize, wxDEFAUL void MainFrame::init_tabpanel() { - m_tabpanel = new wxNotebook(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxNB_TOP | wxTAB_TRAVERSAL); + // wxNB_NOPAGETHEME: Disable Windows Vista theme for the Notebook background. The theme performance is terrible on Windows 10 + // with multiple high resolution displays connected. + m_tabpanel = new wxNotebook(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxNB_TOP | wxTAB_TRAVERSAL | wxNB_NOPAGETHEME); m_tabpanel->Bind(wxEVT_NOTEBOOK_PAGE_CHANGED, [this](wxEvent&) { auto panel = m_tabpanel->GetCurrentPage(); @@ -881,9 +892,10 @@ void MainFrame::on_config_changed(DynamicPrintConfig* config) const // Update the UI based on the current preferences. void MainFrame::update_ui_from_settings() { - bool bp_on = wxGetApp().app_config->get("background_processing") == "1"; + const bool bp_on = wxGetApp().app_config->get("background_processing") == "1"; // m_menu_item_reslice_now->Enable(!bp_on); m_plater->sidebar().show_reslice(!bp_on); + m_plater->sidebar().show_export(bp_on); m_plater->sidebar().Layout(); if (m_plater) m_plater->update_ui_from_settings(); diff --git a/src/slic3r/GUI/MsgDialog.cpp b/src/slic3r/GUI/MsgDialog.cpp index 176d19fb4..961888455 100644 --- a/src/slic3r/GUI/MsgDialog.cpp +++ b/src/slic3r/GUI/MsgDialog.cpp @@ -24,12 +24,11 @@ namespace GUI { MsgDialog::MsgDialog(wxWindow *parent, const wxString &title, const wxString &headline, wxWindowID button_id) : -// MsgDialog(parent, title, headline, wxBitmap(from_u8(Slic3r::var("Slic3r_192px.png")), wxBITMAP_TYPE_PNG), button_id) MsgDialog(parent, title, headline, create_scaled_bitmap("Slic3r_192px.png"), button_id) {} MsgDialog::MsgDialog(wxWindow *parent, const wxString &title, const wxString &headline, wxBitmap bitmap, wxWindowID button_id) : - wxDialog(parent, wxID_ANY, title), + wxDialog(parent, wxID_ANY, title, wxDefaultPosition, wxDefaultSize, wxRESIZE_BORDER), boldfont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT)), content_sizer(new wxBoxSizer(wxVERTICAL)), btn_sizer(new wxBoxSizer(wxHORIZONTAL)) @@ -70,7 +69,6 @@ MsgDialog::~MsgDialog() {} ErrorDialog::ErrorDialog(wxWindow *parent, const wxString &msg) : MsgDialog(parent, _(L("Slic3r error")), _(L("Slic3r has encountered an error")), -// wxBitmap(from_u8(Slic3r::var("Slic3r_192px_grayscale.png")), wxBITMAP_TYPE_PNG), create_scaled_bitmap("Slic3r_192px_grayscale.png"), wxID_NONE) , msg(msg) diff --git a/src/slic3r/GUI/OptionsGroup.cpp b/src/slic3r/GUI/OptionsGroup.cpp index 0e9fcd75e..5e9c9ac30 100644 --- a/src/slic3r/GUI/OptionsGroup.cpp +++ b/src/slic3r/GUI/OptionsGroup.cpp @@ -23,18 +23,18 @@ const t_field& OptionsGroup::build_field(const t_config_option_key& id, const Co // is the normal type. if (opt.gui_type.compare("select") == 0) { } else if (opt.gui_type.compare("select_open") == 0) { - m_fields.emplace(id, std::move(Choice::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(Choice::Create(this->ctrl_parent(), opt, id))); } else if (opt.gui_type.compare("color") == 0) { - m_fields.emplace(id, std::move(ColourPicker::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(ColourPicker::Create(this->ctrl_parent(), opt, id))); } else if (opt.gui_type.compare("f_enum_open") == 0 || opt.gui_type.compare("i_enum_open") == 0 || opt.gui_type.compare("i_enum_closed") == 0) { - m_fields.emplace(id, std::move(Choice::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(Choice::Create(this->ctrl_parent(), opt, id))); } else if (opt.gui_type.compare("slider") == 0) { - m_fields.emplace(id, std::move(SliderCtrl::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(SliderCtrl::Create(this->ctrl_parent(), opt, id))); } else if (opt.gui_type.compare("i_spin") == 0) { // Spinctrl } else if (opt.gui_type.compare("legend") == 0) { // StaticText - m_fields.emplace(id, std::move(StaticText::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(StaticText::Create(this->ctrl_parent(), opt, id))); } else { switch (opt.type) { case coFloatOrPercent: @@ -44,21 +44,21 @@ const t_field& OptionsGroup::build_field(const t_config_option_key& id, const Co case coPercents: case coString: case coStrings: - m_fields.emplace(id, std::move(TextCtrl::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(TextCtrl::Create(this->ctrl_parent(), opt, id))); break; case coBool: case coBools: - m_fields.emplace(id, std::move(CheckBox::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(CheckBox::Create(this->ctrl_parent(), opt, id))); break; case coInt: case coInts: - m_fields.emplace(id, std::move(SpinCtrl::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(SpinCtrl::Create(this->ctrl_parent(), opt, id))); break; case coEnum: - m_fields.emplace(id, std::move(Choice::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(Choice::Create(this->ctrl_parent(), opt, id))); break; case coPoints: - m_fields.emplace(id, std::move(PointCtrl::Create(parent(), opt, id))); + m_fields.emplace(id, std::move(PointCtrl::Create(this->ctrl_parent(), opt, id))); break; case coNone: break; default: @@ -119,7 +119,7 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n return; } if (line.widget != nullptr) { - sizer->Add(line.widget(m_parent), 0, wxEXPAND | wxALL, wxOSX ? 0 : 15); + sizer->Add(line.widget(this->ctrl_parent()), 0, wxEXPAND | wxALL, wxOSX ? 0 : 15); return; } } @@ -167,7 +167,7 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n // if we have an extra column, build it if (extra_column) - grid_sizer->Add(extra_column(parent(), line), 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 3); + grid_sizer->Add(extra_column(this->ctrl_parent(), line), 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 3); // Build a label if we have it wxStaticText* label=nullptr; @@ -179,18 +179,21 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n // Text is properly aligned only when Ellipsize is checked. label_style |= staticbox ? 0 : wxST_ELLIPSIZE_END; #endif /* __WXGTK__ */ - label = new wxStaticText(parent(), wxID_ANY, line.label + (line.label.IsEmpty() ? "" : ": "), + label = new wxStaticText(this->ctrl_parent(), wxID_ANY, line.label + (line.label.IsEmpty() ? "" : ": "), wxDefaultPosition, wxSize(label_width, -1), label_style); + label->SetBackgroundStyle(wxBG_STYLE_PAINT); label->SetFont(label_font); label->Wrap(label_width); // avoid a Linux/GTK bug if (!line.near_label_widget) grid_sizer->Add(label, 0, (staticbox ? 0 : wxALIGN_RIGHT | wxRIGHT) | wxALIGN_CENTER_VERTICAL, line.label.IsEmpty() ? 0 : 5); + else if (line.near_label_widget && line.label.IsEmpty()) + grid_sizer->Add(line.near_label_widget(this->ctrl_parent()), 0, wxRIGHT | wxALIGN_CENTER_VERTICAL, 7); else { // If we're here, we have some widget near the label // so we need a horizontal sizer to arrange these things auto sizer = new wxBoxSizer(wxHORIZONTAL); grid_sizer->Add(sizer, 0, wxEXPAND | (staticbox ? wxALL : wxBOTTOM | wxTOP | wxLEFT), staticbox ? 0 : 1); - sizer->Add(line.near_label_widget(parent()), 0, wxRIGHT, 7); + sizer->Add(line.near_label_widget(this->ctrl_parent()), 0, wxRIGHT, 7); sizer->Add(label, 0, (staticbox ? 0 : wxALIGN_RIGHT | wxRIGHT) | wxALIGN_CENTER_VERTICAL, 5); } if (line.label_tooltip.compare("") != 0) @@ -201,7 +204,7 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n *full_Label = label; // Initiate the pointer to the control of the full label, if we need this one. // If there's a widget, build it and add the result to the sizer. if (line.widget != nullptr) { - auto wgt = line.widget(parent()); + auto wgt = line.widget(this->ctrl_parent()); // If widget doesn't have label, don't use border grid_sizer->Add(wgt, 0, wxEXPAND | wxBOTTOM | wxTOP, (wxOSX || line.label.IsEmpty()) ? 0 : 5); return; @@ -237,7 +240,8 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n wxString str_label = (option.label == "Top" || option.label == "Bottom") ? _CTX(option.label, "Layers") : _(option.label); - label = new wxStaticText(parent(), wxID_ANY, str_label + ": ", wxDefaultPosition, wxDefaultSize); + label = new wxStaticText(this->ctrl_parent(), wxID_ANY, str_label + ": ", wxDefaultPosition, wxDefaultSize); + label->SetBackgroundStyle(wxBG_STYLE_PAINT); label->SetFont(label_font); sizer_tmp->Add(label, 0, /*wxALIGN_RIGHT |*/ wxALIGN_CENTER_VERTICAL, 0); } @@ -262,8 +266,9 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n // add sidetext if any if (option.sidetext != "") { - auto sidetext = new wxStaticText( parent(), wxID_ANY, _(option.sidetext), wxDefaultPosition, + auto sidetext = new wxStaticText( this->ctrl_parent(), wxID_ANY, _(option.sidetext), wxDefaultPosition, wxSize(sidetext_width, -1)/*wxDefaultSize*/, wxALIGN_LEFT); + sidetext->SetBackgroundStyle(wxBG_STYLE_PAINT); sidetext->SetFont(sidetext_font); sizer_tmp->Add(sidetext, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, 4); field->set_side_text_ptr(sidetext); @@ -271,7 +276,7 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n // add side widget if any if (opt.side_widget != nullptr) { - sizer_tmp->Add(opt.side_widget(parent())/*!.target()*/, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, 1); //! requires verification + sizer_tmp->Add(opt.side_widget(this->ctrl_parent())/*!.target()*/, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, 1); //! requires verification } if (opt.opt_id != option_set.back().opt_id) //! istead of (opt != option_set.back()) @@ -287,11 +292,11 @@ void OptionsGroup::append_line(const Line& line, wxStaticText** full_Label/* = n // extra widget for non-staticbox option group (like for the frequently used parameters on the sidebar) should be wxALIGN_RIGHT const auto v_sizer = new wxBoxSizer(wxVERTICAL); sizer->Add(v_sizer, 1, wxEXPAND); - v_sizer->Add(extra_widget(parent()), 0, wxALIGN_RIGHT); + v_sizer->Add(extra_widget(this->ctrl_parent()), 0, wxALIGN_RIGHT); return; } - sizer->Add(extra_widget(parent())/*!.target()*/, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, 4); //! requires verification + sizer->Add(extra_widget(this->ctrl_parent())/*!.target()*/, 0, wxLEFT | wxALIGN_CENTER_VERTICAL, 4); //! requires verification } } diff --git a/src/slic3r/GUI/OptionsGroup.hpp b/src/slic3r/GUI/OptionsGroup.hpp index d9ff6a01a..661aadbd7 100644 --- a/src/slic3r/GUI/OptionsGroup.hpp +++ b/src/slic3r/GUI/OptionsGroup.hpp @@ -112,6 +112,10 @@ public: } #endif /* __WXGTK__ */ + wxWindow* ctrl_parent() const { + return this->stb ? (wxWindow*)this->stb : this->parent(); + } + void append_line(const Line& line, wxStaticText** full_Label = nullptr); Line create_single_option_line(const Option& option) const; void append_single_option_line(const Option& option) { append_line(create_single_option_line(option)); } @@ -161,8 +165,10 @@ public: staticbox(title!=""), extra_column(extra_clmn) { if (staticbox) { stb = new wxStaticBox(_parent, wxID_ANY, title); + stb->SetBackgroundStyle(wxBG_STYLE_PAINT); stb->SetFont(wxGetApp().bold_font()); - } + } else + stb = nullptr; sizer = (staticbox ? new wxStaticBoxSizer(stb, wxVERTICAL) : new wxBoxSizer(wxVERTICAL)); auto num_columns = 1U; if (label_width != 0) num_columns++; diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index 40f18598f..56dc323b3 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -50,6 +50,7 @@ #include "GLToolbar.hpp" #include "GUI_Preview.hpp" #include "3DBed.hpp" +#include "Camera.hpp" #include "Tab.hpp" #include "PresetBundle.hpp" #include "BackgroundSlicingProcess.hpp" @@ -364,20 +365,20 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent, const int label_width) : Line line = Line { "", "" }; - ConfigOptionDef def; - def.label = L("Supports"); - def.type = coStrings; - def.gui_type = "select_open"; - def.tooltip = L("Select what kind of support do you need"); - def.enum_labels.push_back(L("None")); - def.enum_labels.push_back(L("Support on build plate only")); - def.enum_labels.push_back(L("Everywhere")); - const std::string selection = !config->opt_bool("support_material") ? - "None" : config->opt_bool("support_material_buildplate_only") ? - "Support on build plate only" : - "Everywhere"; - def.default_value = new ConfigOptionStrings{ selection }; - Option option = Option(def, "support"); + ConfigOptionDef support_def; + support_def.label = L("Supports"); + support_def.type = coStrings; + support_def.gui_type = "select_open"; + support_def.tooltip = L("Select what kind of support do you need"); + support_def.enum_labels.push_back(L("None")); + support_def.enum_labels.push_back(L("Support on build plate only")); + support_def.enum_labels.push_back(L("Everywhere")); + std::string selection = !config->opt_bool("support_material") ? + "None" : config->opt_bool("support_material_buildplate_only") ? + "Support on build plate only" : + "Everywhere"; + support_def.default_value = new ConfigOptionStrings{ selection }; + Option option = Option(support_def, "support"); option.opt.full_width = true; line.append_option(option); m_og->append_line(line); @@ -392,6 +393,7 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent, const int label_width) : line.append_option(option); m_brim_width = config->opt_float("brim_width"); + ConfigOptionDef def; def.label = L("Brim"); def.type = coBool; def.tooltip = L("This flag enables the brim that will be printed around each object on the first layer."); @@ -427,6 +429,7 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent, const int label_width) : m_og->append_line(line); + // Frequently changed parameters for SLA_technology m_og_sla = std::make_shared(parent, ""); DynamicPrintConfig* config_sla = &wxGetApp().preset_bundle->sla_prints.get_edited_preset().config; @@ -437,20 +440,43 @@ FreqChangedParams::FreqChangedParams(wxWindow* parent, const int label_width) : Tab* tab = wxGetApp().get_tab(Preset::TYPE_SLA_PRINT); if (!tab) return; - tab->set_value(opt_key, value); + if (opt_key == "pad_enable") { + tab->set_value(opt_key, value); + tab->update(); + } + else //(opt_key == "support") + { + DynamicPrintConfig new_conf = *config_sla; + const wxString& selection = boost::any_cast(value); + + const bool supports_enable = selection == _("None") ? false : true; + new_conf.set_key_value("supports_enable", new ConfigOptionBool(supports_enable)); + + if (selection == _("Everywhere")) + new_conf.set_key_value("support_buildplate_only", new ConfigOptionBool(false)); + else if (selection == _("Support on build plate only")) + new_conf.set_key_value("support_buildplate_only", new ConfigOptionBool(true)); + + tab->load_config(new_conf); + } - DynamicPrintConfig new_conf = *config_sla; - new_conf.set_key_value(opt_key, new ConfigOptionBool(boost::any_cast(value))); - tab->load_config(new_conf); tab->update_dirty(); - }; - + }; line = Line{ "", "" }; - option = m_og_sla->get_option("supports_enable"); - option.opt.sidetext = " "; + selection = !config_sla->opt_bool("supports_enable") ? + "None" : config_sla->opt_bool("support_buildplate_only") ? + "Support on build plate only" : + "Everywhere"; + support_def.default_value = new ConfigOptionStrings{ selection }; + option = Option(support_def, "support"); + option.opt.full_width = true; line.append_option(option); + m_og_sla->append_line(line); + + + line = Line{ "", "" }; option = m_og_sla->get_option("pad_enable"); option.opt.sidetext = " "; @@ -487,11 +513,18 @@ ConfigOptionsGroup* FreqChangedParams::get_og(const bool is_fff) // Sidebar / private +enum class ActionButtonType : int { + abReslice, + abExport, + abSendGCode +}; + struct Sidebar::priv { Plater *plater; wxScrolledWindow *scrolled; + wxPanel* presets_panel; // Used for MSW better layouts PrusaModeSizer *mode_sizer; wxFlexGridSizer *sizer_presets; @@ -523,8 +556,6 @@ void Sidebar::priv::show_preset_comboboxes() { const bool showSLA = wxGetApp().preset_bundle->printers.get_edited_preset().printer_technology() == ptSLA; - wxWindowUpdateLocker noUpdates_scrolled(scrolled->GetParent()); - for (size_t i = 0; i < 4; ++i) sizer_presets->Show(i, !showSLA); @@ -548,6 +579,7 @@ Sidebar::Sidebar(Plater *parent) p->scrolled = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(40 * wxGetApp().em_unit(), -1)); p->scrolled->SetScrollbars(0, 20, 1, 2); + // Sizer in the scrolled area auto *scrolled_sizer = new wxBoxSizer(wxVERTICAL); p->scrolled->SetSizer(scrolled_sizer); @@ -559,12 +591,25 @@ Sidebar::Sidebar(Plater *parent) p->sizer_presets = new wxFlexGridSizer(10, 1, 1, 2); p->sizer_presets->AddGrowableCol(0, 1); p->sizer_presets->SetFlexibleDirection(wxBOTH); + + bool is_msw = false; +#ifdef __WINDOWS__ + p->scrolled->SetDoubleBuffered(true); + + p->presets_panel = new wxPanel(p->scrolled, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL); + p->presets_panel->SetSizer(p->sizer_presets); + + is_msw = true; +#else + p->presets_panel = p->scrolled; +#endif //__WINDOWS__ + p->sizer_filaments = new wxBoxSizer(wxVERTICAL); auto init_combo = [this](PresetComboBox **combo, wxString label, Preset::Type preset_type, bool filament) { - auto *text = new wxStaticText(p->scrolled, wxID_ANY, label+" :"); + auto *text = new wxStaticText(p->presets_panel, wxID_ANY, label + " :"); text->SetFont(wxGetApp().small_font()); - *combo = new PresetComboBox(p->scrolled, preset_type); + *combo = new PresetComboBox(p->presets_panel, preset_type); auto *sizer_presets = this->p->sizer_presets; auto *sizer_filaments = this->p->sizer_filaments; @@ -613,9 +658,7 @@ Sidebar::Sidebar(Plater *parent) p->object_settings->Hide(); p->sizer_params->Add(p->object_settings->get_sizer(), 0, wxEXPAND | wxTOP, margin_5); - wxBitmap arrow_up(GUI::from_u8(Slic3r::var("brick_go.png")), wxBITMAP_TYPE_PNG); p->btn_send_gcode = new wxButton(this, wxID_ANY, _(L("Send to printer"))); - p->btn_send_gcode->SetBitmap(arrow_up); p->btn_send_gcode->SetFont(wxGetApp().bold_font()); p->btn_send_gcode->Hide(); @@ -625,7 +668,9 @@ Sidebar::Sidebar(Plater *parent) // Sizer in the scrolled area scrolled_sizer->Add(p->mode_sizer, 0, wxALIGN_CENTER_HORIZONTAL/*RIGHT | wxBOTTOM | wxRIGHT, 5*/); - scrolled_sizer->Add(p->sizer_presets, 0, wxEXPAND | wxLEFT, margin_5); + is_msw ? + scrolled_sizer->Add(p->presets_panel, 0, wxEXPAND | wxLEFT, margin_5) : + scrolled_sizer->Add(p->sizer_presets, 0, wxEXPAND | wxLEFT, margin_5); scrolled_sizer->Add(p->sizer_params, 1, wxEXPAND | wxLEFT, margin_5); scrolled_sizer->Add(p->object_info, 0, wxEXPAND | wxTOP | wxLEFT, margin_5); scrolled_sizer->Add(p->sliced_info, 0, wxEXPAND | wxTOP | wxLEFT, margin_5); @@ -649,14 +694,21 @@ Sidebar::Sidebar(Plater *parent) // Events p->btn_export_gcode->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { p->plater->export_gcode(); }); - p->btn_reslice->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { p->plater->reslice(); }); + p->btn_reslice->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) + { + const bool export_gcode_after_slicing = wxGetKeyState(WXK_SHIFT); + if (export_gcode_after_slicing) + p->plater->export_gcode(); + else + p->plater->reslice(); + }); p->btn_send_gcode->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { p->plater->send_gcode(); }); } Sidebar::~Sidebar() {} void Sidebar::init_filament_combo(PresetComboBox **combo, const int extr_idx) { - *combo = new PresetComboBox(p->scrolled, Slic3r::Preset::TYPE_FILAMENT); + *combo = new PresetComboBox(p->presets_panel, Slic3r::Preset::TYPE_FILAMENT); // # copy icons from first choice // $choice->SetItemBitmap($_, $choices->[0]->GetItemBitmap($_)) for 0..$#presets; @@ -718,6 +770,8 @@ void Sidebar::update_presets(Preset::Type preset_type) case Preset::TYPE_PRINTER: { +// wxWindowUpdateLocker noUpdates_scrolled(p->scrolled); + // Update the print choosers to only contain the compatible presets, update the dirty flags. if (print_tech == ptFFF) preset_bundle.prints.update_platter_ui(p->combo_print); @@ -747,9 +801,15 @@ void Sidebar::update_presets(Preset::Type preset_type) wxGetApp().preset_bundle->export_selections(*wxGetApp().app_config); } -void Sidebar::update_mode_sizer(const Slic3r::ConfigOptionMode& mode) +void Sidebar::update_mode_sizer() const { - p->mode_sizer->SetMode(mode); + p->mode_sizer->SetMode(m_mode); +} + +void Sidebar::update_reslice_btn_tooltip() const +{ + const wxString tooltip = m_mode == comSimple ? wxString("") : _(L("Hold Shift to Slice & Export G-code")); + p->btn_reslice->SetToolTip(tooltip); } ObjectManipulation* Sidebar::obj_manipul() @@ -772,6 +832,11 @@ wxScrolledWindow* Sidebar::scrolled_panel() return p->scrolled; } +wxPanel* Sidebar::presets_panel() +{ + return p->presets_panel; +} + ConfigOptionsGroup* Sidebar::og_freq_chng_params(const bool is_fff) { return p->frequently_changed_parameters->get_og(is_fff); @@ -942,8 +1007,9 @@ void Sidebar::enable_buttons(bool enable) p->btn_send_gcode->Enable(enable); } -void Sidebar::show_reslice(bool show) { p->btn_reslice->Show(show); } -void Sidebar::show_send(bool show) { p->btn_send_gcode->Show(show); } +void Sidebar::show_reslice(bool show) const { p->btn_reslice->Show(show); } +void Sidebar::show_export(bool show) const { p->btn_export_gcode->Show(show); } +void Sidebar::show_send(bool show) const { p->btn_send_gcode->Show(show); } bool Sidebar::is_multifilament() { @@ -951,6 +1017,24 @@ bool Sidebar::is_multifilament() } +void Sidebar::update_mode() +{ + m_mode = wxGetApp().get_mode(); + + update_reslice_btn_tooltip(); + update_mode_sizer(); + + wxWindowUpdateLocker noUpdates(this); + + p->object_list->get_sizer()->Show(m_mode > comSimple); + + p->object_list->unselect_objects(); + p->object_list->update_selections(); + p->object_list->update_object_menu(); + + Layout(); +} + std::vector& Sidebar::combos_filament() { return p->combos_filament; @@ -1019,6 +1103,7 @@ struct Plater::priv std::vector panels; Sidebar *sidebar; Bed3D bed; + Camera camera; View3D* view3D; GLToolbar view_toolbar; Preview *preview; @@ -1033,6 +1118,9 @@ struct Plater::priv wxTimer background_process_timer; + std::string label_btn_export; + std::string label_btn_send; + static const std::regex pattern_bundle; static const std::regex pattern_3mf; static const std::regex pattern_zip_amf; @@ -1115,13 +1203,13 @@ struct Plater::priv void on_action_layersediting(SimpleEvent&); void on_object_select(SimpleEvent&); - void on_viewport_changed(SimpleEvent&); void on_right_click(Vec2dEvent&); void on_wipetower_moved(Vec3dEvent&); void on_update_geometry(Vec3dsEvent<2>&); void on_3dcanvas_mouse_dragging_finished(SimpleEvent&); void update_object_menu(); + void show_action_buttons(const bool is_ready_to_slice) const; // Set the bed shape to a single closed 2D polygon(array of two element arrays), // triangulate the bed and store the triangles into m_bed.m_triangles, @@ -1202,11 +1290,8 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame) sla_print.set_status_callback(statuscb); this->q->Bind(EVT_SLICING_UPDATE, &priv::on_slicing_update, this); - view3D = new View3D(q, &model, config, &background_process); - preview = new Preview(q, config, &background_process, &gcode_preview_data, [this](){ schedule_background_process(); }); - - view3D->set_bed(&bed); - preview->set_bed(&bed); + view3D = new View3D(q, bed, camera, view_toolbar, &model, config, &background_process); + preview = new Preview(q, bed, camera, view_toolbar, config, &background_process, &gcode_preview_data, [this](){ schedule_background_process(); }); panels.push_back(view3D); panels.push_back(preview); @@ -1238,7 +1323,6 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame) // 3DScene events: view3D_canvas->Bind(EVT_GLCANVAS_SCHEDULE_BACKGROUND_PROCESS, [this](SimpleEvent&) { this->schedule_background_process(); }); view3D_canvas->Bind(EVT_GLCANVAS_OBJECT_SELECT, &priv::on_object_select, this); - view3D_canvas->Bind(EVT_GLCANVAS_VIEWPORT_CHANGED, &priv::on_viewport_changed, this); view3D_canvas->Bind(EVT_GLCANVAS_RIGHT_CLICK, &priv::on_right_click, this); view3D_canvas->Bind(EVT_GLCANVAS_REMOVE_OBJECT, [q](SimpleEvent&) { q->remove_selected(); }); view3D_canvas->Bind(EVT_GLCANVAS_ARRANGE, [this](SimpleEvent&) { arrange(); }); @@ -1268,7 +1352,6 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame) view3D_canvas->Bind(EVT_GLCANVAS_UPDATE_BED_SHAPE, [this](SimpleEvent&) { set_bed_shape(config->option("bed_shape")->values); }); // Preview events: - preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_VIEWPORT_CHANGED, &priv::on_viewport_changed, this); preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_QUESTION_MARK, [this](SimpleEvent&) { wxGetApp().keyboard_shortcuts(); }); preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_UPDATE_BED_SHAPE, [this](SimpleEvent&) { set_bed_shape(config->option("bed_shape")->values); }); preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_TAB, [this](SimpleEvent&) { select_next_view_3D(); }); @@ -2089,13 +2172,36 @@ unsigned int Plater::priv::update_background_process(bool force_validation) wxQueueEvent(GUI::wxGetApp().mainframe->m_plater, evt.Clone()); } - //FIXME update "Slice Now / Schedule background process" - //background_process.is_export_scheduled() - byl zavolan "Export G-code", background processing ma jmeno export souboru - //background_process.is_upload_scheduled() - byl zavolan "Send to OctoPrint", jeste nebylo doslajsovano (pak se preda upload fronte a background process zapomene) - //background_process.empty() - prazdna plocha - // pokud (return_state & UPDATE_BACKGROUND_PROCESS_INVALID) != 0 -> doslo k chybe (gray out "Slice now") mozna "Invalid data"??? - // jinak background_process.running() -> Zobraz "Slicing ..." - // jinak pokud ! background_process.empty() && ! background_process.finished() -> je neco ke slajsovani (povol tlacitko) "Slice Now" + if ((return_state & UPDATE_BACKGROUND_PROCESS_INVALID) != 0) + { + // Validation of the background data failed. + const wxString invalid_str = _(L("Invalid data")); + for (auto btn : {ActionButtonType::abReslice, ActionButtonType::abSendGCode, ActionButtonType::abExport}) + sidebar->set_btn_label(btn, invalid_str); + } + else + { + // Background data is valid. + if ((return_state & UPDATE_BACKGROUND_PROCESS_RESTART) != 0 || + (return_state & UPDATE_BACKGROUND_PROCESS_REFRESH_SCENE) != 0 ) + this->statusbar()->set_status_text(L("Ready to slice")); + + sidebar->set_btn_label(ActionButtonType::abExport, _(label_btn_export)); + sidebar->set_btn_label(ActionButtonType::abSendGCode, _(label_btn_send)); + + const wxString slice_string = background_process.running() && wxGetApp().get_mode() == comSimple ? + _(L("Slicing")) + dots : _(L("Slice now")); + sidebar->set_btn_label(ActionButtonType::abReslice, slice_string); + + if (background_process.finished()) + show_action_buttons(false); + else if (!background_process.empty() && + !background_process.running()) /* Do not update buttons if background process is running + * This condition is important for SLA mode especially, + * when this function is called several times during calculations + * */ + show_action_buttons(true); + } return return_state; } @@ -2226,6 +2332,10 @@ void Plater::priv::set_current_panel(wxPanel* panel) if (std::find(panels.begin(), panels.end(), panel) == panels.end()) return; +#ifdef __WXMAC__ + bool force_render = (current_panel != nullptr); +#endif // __WXMAC__ + if (current_panel == panel) return; @@ -2234,7 +2344,19 @@ void Plater::priv::set_current_panel(wxPanel* panel) for (wxPanel* p : panels) { if (p == current_panel) + { +#ifdef __WXMAC__ + // On Mac we need also to force a render to avoid flickering when changing view + if (force_render) + { + if (p == view3D) + dynamic_cast(p)->get_canvas3d()->render(); + else if (p == preview) + dynamic_cast(p)->get_canvas3d()->render(); + } +#endif // __WXMAC__ p->Show(); + } } // then set to invisible the other for (wxPanel* p : panels) @@ -2266,7 +2388,7 @@ void Plater::priv::set_current_panel(wxPanel* panel) { this->q->reslice(); // keeps current gcode preview, if any - preview->reload_print(false, true); + preview->reload_print(true); preview->set_canvas_as_dirty(); view_toolbar.select_item("Preview"); } @@ -2288,7 +2410,7 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt) //! instead of //! combo->GetStringSelection().ToUTF8().data()); - std::string selected_string = combo->GetString(combo->GetSelection()).ToUTF8().data(); + const std::string& selected_string = combo->GetString(combo->GetSelection()).ToUTF8().data(); if (preset_type == Preset::TYPE_FILAMENT) { wxGetApp().preset_bundle->set_filament_preset(idx, selected_string); @@ -2300,12 +2422,8 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt) wxGetApp().preset_bundle->update_platter_filament_ui(idx, combo); } else { - for (Tab* tab : wxGetApp().tabs_list) { - if (tab->type() == preset_type) { - tab->select_preset(selected_string); - break; - } - } + wxWindowUpdateLocker noUpdates(sidebar->presets_panel()); + wxGetApp().get_tab(preset_type)->select_preset(selected_string); } // update plater with new config @@ -2316,8 +2434,10 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt) void Plater::priv::on_slicing_update(SlicingStatusEvent &evt) { - this->statusbar()->set_progress(evt.status.percent); - this->statusbar()->set_status_text(_(L(evt.status.text)) + wxString::FromUTF8("…")); + if (evt.status.percent >= -1) { + this->statusbar()->set_progress(evt.status.percent); + this->statusbar()->set_status_text(_(L(evt.status.text)) + wxString::FromUTF8("…")); + } if (evt.status.flags & PrintBase::SlicingStatus::RELOAD_SCENE) { switch (this->printer_technology) { case ptFFF: @@ -2335,6 +2455,10 @@ void Plater::priv::on_slicing_update(SlicingStatusEvent &evt) // Update SLA gizmo (reload_scene calls update_gizmos_data) q->canvas3D()->reload_scene(true); } + if (evt.status.flags & PrintBase::SlicingStatus::RELOAD_SLA_PREVIEW) { + // Update the SLA preview + this->preview->reload_print(); + } } void Plater::priv::on_slicing_completed(wxCommandEvent &) @@ -2361,14 +2485,17 @@ void Plater::priv::on_process_completed(wxCommandEvent &evt) this->statusbar()->reset_cancel_callback(); this->statusbar()->stop_busy(); - bool canceled = evt.GetInt() < 0; - bool success = evt.GetInt() > 0; + const bool canceled = evt.GetInt() < 0; + const bool error = evt.GetInt() == 0; + const bool success = evt.GetInt() > 0; // Reset the "export G-code path" name, so that the automatic background processing will be enabled again. this->background_process.reset_export(); - if (! success) { + + if (error) { wxString message = evt.GetString(); if (message.IsEmpty()) message = _(L("Export failed")); + show_error(q, message); this->statusbar()->set_status_text(message); } if (canceled) @@ -2393,6 +2520,14 @@ void Plater::priv::on_process_completed(wxCommandEvent &evt) this->update_sla_scene(); break; } + + if (canceled) { + if (wxGetApp().get_mode() == comSimple) + sidebar->set_btn_label(ActionButtonType::abReslice, "Slice now"); + show_action_buttons(true); + } + else if (wxGetApp().get_mode() == comSimple) + show_action_buttons(false); } void Plater::priv::on_layer_editing_toggled(bool enable) @@ -2435,15 +2570,6 @@ void Plater::priv::on_object_select(SimpleEvent& evt) selection_changed(); } -void Plater::priv::on_viewport_changed(SimpleEvent& evt) -{ - wxObject* o = evt.GetEventObject(); - if (o == preview->get_wxglcanvas()) - preview->set_viewport_into_scene(view3D->get_canvas3d()); - else if (o == view3D->get_wxglcanvas()) - preview->set_viewport_from_scene(view3D->get_canvas3d()); -} - void Plater::priv::on_right_click(Vec2dEvent& evt) { int obj_idx = get_selected_object_idx(); @@ -2506,15 +2632,20 @@ bool Plater::priv::init_object_menu() bool Plater::priv::init_common_menu(wxMenu* menu, const bool is_part/* = false*/) { - wxMenuItem* item_delete = append_menu_item(menu, wxID_ANY, _(L("Delete")) + "\tDel", _(L("Remove the selected object")), - [this](wxCommandEvent&) { q->remove_selected(); }, "brick_delete.png"); - if (!is_part){ + wxMenuItem* item_delete = nullptr; + if (is_part) { + item_delete = append_menu_item(menu, wxID_ANY, _(L("Delete")) + "\tDel", _(L("Remove the selected object")), + [this](wxCommandEvent&) { q->remove_selected(); }, "brick_delete.png"); + } else { wxMenuItem* item_increase = append_menu_item(menu, wxID_ANY, _(L("Increase copies")) + "\t+", _(L("Place one more copy of the selected object")), [this](wxCommandEvent&) { q->increase_instances(); }, "add.png"); wxMenuItem* item_decrease = append_menu_item(menu, wxID_ANY, _(L("Decrease copies")) + "\t-", _(L("Remove one copy of the selected object")), [this](wxCommandEvent&) { q->decrease_instances(); }, "delete.png"); wxMenuItem* item_set_number_of_copies = append_menu_item(menu, wxID_ANY, _(L("Set number of copies")) + dots, _(L("Change the number of copies of the selected object")), [this](wxCommandEvent&) { q->set_number_of_copies(); }, "textfield.png"); + // Delete menu was moved to be after +/- instace to make it more difficult to be selected by mistake. + item_delete = append_menu_item(menu, wxID_ANY, _(L("Delete")) + "\tDel", _(L("Remove the selected object")), + [this](wxCommandEvent&) { q->remove_selected(); }, "brick_delete.png"); menu->AppendSeparator(); wxMenuItem* item_instance_to_object = sidebar->obj_list()->append_menu_item_instance_to_object(menu); @@ -2551,7 +2682,7 @@ bool Plater::priv::init_common_menu(wxMenu* menu, const bool is_part/* = false*/ wxMenuItem* item_mirror = append_submenu(menu, mirror_menu, wxID_ANY, _(L("Mirror")), _(L("Mirror the selected object"))); - // ui updates needs to be binded to the parent panel + // ui updates needs to be bound to the parent panel if (q != nullptr) { q->Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt) { evt.Enable(can_mirror()); }, item_mirror->GetId()); @@ -2681,9 +2812,6 @@ void Plater::priv::init_view_toolbar() view_toolbar.select_item("3D"); view_toolbar.set_enabled(true); - - view3D->set_view_toolbar(&view_toolbar); - preview->set_view_toolbar(&view_toolbar); } bool Plater::priv::can_delete_object() const @@ -2768,6 +2896,38 @@ void Plater::priv::update_object_menu() view3D->update_toolbar_items_visibility(); } +void Plater::priv::show_action_buttons(const bool is_ready_to_slice) const +{ + wxWindowUpdateLocker noUpdater(sidebar); + const auto prin_host_opt = config->option("print_host"); + const bool send_gcode_shown = prin_host_opt != nullptr && !prin_host_opt->value.empty(); + + // when a background processing is ON, export_btn and/or send_btn are showing + if (wxGetApp().app_config->get("background_processing") == "1") + { + sidebar->show_reslice(false); + sidebar->show_export(true); + sidebar->show_send(send_gcode_shown); + } + else + { + sidebar->show_reslice(is_ready_to_slice); + sidebar->show_export(!is_ready_to_slice); + sidebar->show_send(send_gcode_shown && !is_ready_to_slice); + } + sidebar->Layout(); +} + +void Sidebar::set_btn_label(const ActionButtonType btn_type, const wxString& label) const +{ + switch (btn_type) + { + case ActionButtonType::abReslice: p->btn_reslice->SetLabelText(label); break; + case ActionButtonType::abExport: p->btn_export_gcode->SetLabelText(label); break; + case ActionButtonType::abSendGCode: p->btn_send_gcode->SetLabelText(label); break; + } +} + // Plater / Public Plater::Plater(wxWindow *parent, MainFrame *main_frame) @@ -3094,6 +3254,22 @@ void Plater::reslice() this->p->background_process.set_task(PrintBase::TaskParams()); // Only restarts if the state is valid. this->p->restart_background_process(state | priv::UPDATE_BACKGROUND_PROCESS_FORCE_RESTART); + + if ((state & priv::UPDATE_BACKGROUND_PROCESS_INVALID) != 0) + return; + + if (p->background_process.running()) + { + if (wxGetApp().get_mode() == comSimple) + p->sidebar->set_btn_label(ActionButtonType::abReslice, _(L("Slicing")) + dots); + else + { + p->sidebar->set_btn_label(ActionButtonType::abReslice, _(L("Slice now"))); + p->show_action_buttons(false); + } + } + else if (!p->background_process.empty() && !p->background_process.idle()) + p->show_action_buttons(true); } void Plater::reslice_SLA_supports(const ModelObject &object) @@ -3157,8 +3333,10 @@ void Plater::on_extruders_change(int num_extruders) { auto& choices = sidebar().combos_filament(); + if (num_extruders == choices.size()) + return; + wxWindowUpdateLocker noUpdates_scrolled_panel(&sidebar()/*.scrolled_panel()*/); -// sidebar().scrolled_panel()->Freeze(); int i = choices.size(); while ( i < num_extruders ) @@ -3292,6 +3470,9 @@ void Plater::set_printer_technology(PrinterTechnology printer_technology) } //FIXME for SLA synchronize //p->background_process.apply(Model)! + + p->label_btn_export = printer_technology == ptFFF ? L("Export G-code") : L("Export"); + p->label_btn_send = printer_technology == ptFFF ? L("Send G-code") : L("Send to printer"); } void Plater::changed_object(int obj_idx) diff --git a/src/slic3r/GUI/Plater.hpp b/src/slic3r/GUI/Plater.hpp index 4d489c82a..ecce63805 100644 --- a/src/slic3r/GUI/Plater.hpp +++ b/src/slic3r/GUI/Plater.hpp @@ -38,6 +38,7 @@ class GLCanvas3D; using t_optgroups = std::vector >; class Plater; +enum class ActionButtonType : int; class PresetComboBox : public wxBitmapComboBox { @@ -61,7 +62,7 @@ private: class Sidebar : public wxPanel { - /*ConfigOptionMode*/int m_mode; + ConfigOptionMode m_mode; public: Sidebar(Plater *parent); Sidebar(Sidebar &&) = delete; @@ -73,12 +74,14 @@ public: void init_filament_combo(PresetComboBox **combo, const int extr_idx); void remove_unused_filament_combos(const int current_extruder_count); void update_presets(Slic3r::Preset::Type preset_type); - void update_mode_sizer(const Slic3r::ConfigOptionMode& mode); + void update_mode_sizer() const; + void update_reslice_btn_tooltip() const; ObjectManipulation* obj_manipul(); ObjectList* obj_list(); ObjectSettings* obj_settings(); wxScrolledWindow* scrolled_panel(); + wxPanel* presets_panel(); ConfigOptionsGroup* og_freq_chng_params(const bool is_fff); wxButton* get_wiping_dialog_button(); @@ -86,10 +89,12 @@ public: void show_info_sizer(); void show_sliced_info_sizer(const bool show); void enable_buttons(bool enable); - void show_reslice(bool show); - void show_send(bool show); + void set_btn_label(const ActionButtonType btn_type, const wxString& label) const; + void show_reslice(bool show) const; + void show_export(bool show) const; + void show_send(bool show) const; bool is_multifilament(); - void set_mode_value(const /*ConfigOptionMode*/int mode) { m_mode = mode; } + void update_mode(); std::vector& combos_filament(); private: diff --git a/src/slic3r/GUI/Preset.cpp b/src/slic3r/GUI/Preset.cpp index 37b495a36..656658b0b 100644 --- a/src/slic3r/GUI/Preset.cpp +++ b/src/slic3r/GUI/Preset.cpp @@ -457,6 +457,7 @@ const std::vector& Preset::sla_print_options() "support_base_height", "support_critical_angle", "support_max_bridge_length", + "support_max_pillar_link_distance", "support_object_elevation", "support_points_density_relative", "support_points_minimal_distance", @@ -880,6 +881,7 @@ void PresetCollection::update_platter_ui(GUI::PresetComboBox *ui) { if (ui == nullptr) return; + // Otherwise fill in the list from scratch. ui->Freeze(); ui->Clear(); diff --git a/src/slic3r/GUI/PresetBundle.cpp b/src/slic3r/GUI/PresetBundle.cpp index 0ee7a5c6c..f0bb4de01 100644 --- a/src/slic3r/GUI/PresetBundle.cpp +++ b/src/slic3r/GUI/PresetBundle.cpp @@ -1289,7 +1289,7 @@ void PresetBundle::update_compatible(bool select_other_if_incompatible) { const Preset &printer_preset = this->printers.get_edited_preset(); - switch (printers.get_edited_preset().printer_technology()) { + switch (printer_preset.printer_technology()) { case ptFFF: { assert(printer_preset.config.has("default_print_profile")); diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index b3580a285..d54d01572 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -58,6 +58,13 @@ Tab::Tab(wxNotebook* parent, const wxString& title, const char* name) : wxGetApp().tabs_list.push_back(this); m_em_unit = wxGetApp().em_unit(); + + Bind(wxEVT_SIZE, ([this](wxSizeEvent &evt) { + for (auto page : m_pages) + if (! page.get()->IsShown()) + page->layout_valid = false; + evt.Skip(); + })); } void Tab::set_type() @@ -73,6 +80,10 @@ void Tab::set_type() // sub new void Tab::create_preset_tab() { +#ifdef __WINDOWS__ + SetDoubleBuffered(true); +#endif //__WINDOWS__ + m_preset_bundle = wxGetApp().preset_bundle; // Vertical sizer to hold the choice menu and the rest of the page. @@ -290,6 +301,11 @@ Slic3r::GUI::PageShp Tab::add_options_page(const wxString& title, const std::str auto panel = this; #endif PageShp page(new Page(panel, title, icon_idx)); +// page->SetBackgroundStyle(wxBG_STYLE_SYSTEM); +#ifdef __WINDOWS__ +// page->SetDoubleBuffered(true); +#endif //__WINDOWS__ + page->SetScrollbars(1, 20, 1, 2); page->Hide(); m_hsizer->Add(page.get(), 1, wxEXPAND | wxLEFT, 5); @@ -315,7 +331,7 @@ void Tab::OnActivate() void Tab::update_labels_colour() { - Freeze(); +// Freeze(); //update options "decoration" for (const auto opt : m_options_list) { @@ -342,7 +358,7 @@ void Tab::update_labels_colour() if (field == nullptr) continue; field->set_label_colour_force(color); } - Thaw(); +// Thaw(); auto cur_item = m_treectrl->GetFirstVisibleItem(); while (cur_item) { @@ -386,7 +402,7 @@ void Tab::update_changed_ui() for (auto opt_key : dirty_options) m_options_list[opt_key] &= ~osInitValue; for (auto opt_key : nonsys_options) m_options_list[opt_key] &= ~osSystemValue; - Freeze(); +// Freeze(); //update options "decoration" for (const auto opt : m_options_list) { @@ -436,7 +452,7 @@ void Tab::update_changed_ui() field->set_undo_to_sys_tooltip(sys_tt); field->set_label_colour(color); } - Thaw(); +// Thaw(); wxTheApp->CallAfter([this]() { update_changed_tree_ui(); @@ -683,16 +699,16 @@ void Tab::load_config(const DynamicPrintConfig& config) // Reload current $self->{config} (aka $self->{presets}->edited_preset->config) into the UI fields. void Tab::reload_config() { - Freeze(); +// Freeze(); for (auto page : m_pages) page->reload_config(); - Thaw(); +// Thaw(); } void Tab::update_visibility() { const ConfigOptionMode mode = wxGetApp().get_mode(); - Freeze(); +// Freeze(); for (auto page : m_pages) page->update_visibility(mode); @@ -702,7 +718,7 @@ void Tab::update_visibility() m_mode_sizer->SetMode(mode); Layout(); - Thaw(); +// Thaw(); // to update tree items color // wxTheApp->CallAfter([this]() { @@ -752,21 +768,29 @@ void Tab::load_key_value(const std::string& opt_key, const boost::any& value, bo void Tab::on_value_change(const std::string& opt_key, const boost::any& value) { - ConfigOptionsGroup* og_freq_chng_params = wxGetApp().sidebar().og_freq_chng_params(supports_printer_technology(ptFFF)); - if (opt_key == "fill_density" || opt_key == "supports_enable" || opt_key == "pad_enable") + if (wxGetApp().plater() == nullptr) { + return; + } + + const bool is_fff = supports_printer_technology(ptFFF); + ConfigOptionsGroup* og_freq_chng_params = wxGetApp().sidebar().og_freq_chng_params(is_fff); + if (opt_key == "fill_density" || opt_key == "pad_enable") { boost::any val = og_freq_chng_params->get_config_value(*m_config, opt_key); og_freq_chng_params->set_value(opt_key, val); } - if (opt_key == "support_material" || opt_key == "support_material_buildplate_only") + + if ( is_fff && (opt_key == "support_material" || opt_key == "support_material_buildplate_only") || + !is_fff && (opt_key == "supports_enable" || opt_key == "support_buildplate_only")) { - wxString new_selection = !m_config->opt_bool("support_material") ? - _("None") : - m_config->opt_bool("support_material_buildplate_only") ? - _("Support on build plate only") : - _("Everywhere"); + const std::string support = is_fff ? "support_material" : "supports_enable"; + const std::string buildplate_only = is_fff ? "support_material_buildplate_only" : "support_buildplate_only"; + wxString new_selection = !m_config->opt_bool(support) ? _("None") : + m_config->opt_bool(buildplate_only) ? _("Support on build plate only") : + _("Everywhere"); og_freq_chng_params->set_value("support", new_selection); } + if (opt_key == "brim_width") { bool val = m_config->opt_float("brim_width") > 0.0 ? true : false; @@ -780,25 +804,6 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value) wxGetApp().plater()->on_extruders_change(boost::any_cast(value)); update(); - - // #ys_FIXME_to_delete - // Post event to the Plater after updating of the all dirty options - // It helps to avoid needless schedule_background_processing -// if (update_completed()) -// if (m_update_stack.empty()) -// { -// // wxCommandEvent event(EVT_TAB_VALUE_CHANGED); -// // event.SetEventObject(this); -// // event.SetString(opt_key); -// // if (opt_key == "extruders_count") -// // { -// // const int val = boost::any_cast(value); -// // event.SetInt(val); -// // } -// // -// // wxPostEvent(this, event); -// wxGetApp().mainframe->on_value_changed(m_config); -// } } // Show/hide the 'purging volumes' button @@ -821,9 +826,17 @@ void Tab::update_wiping_button_visibility() { // To update the content of the selection boxes, // to update the filament colors of the selection boxes, // to update the "dirty" flags of the selection boxes, -// to uddate number of "filament" selection boxes when the number of extruders change. +// to update number of "filament" selection boxes when the number of extruders change. void Tab::on_presets_changed() { + if (wxGetApp().plater() == nullptr) { + return; + } + + // Instead of PostEvent (EVT_TAB_PRESETS_CHANGED) just call update_presets + wxGetApp().plater()->sidebar().update_presets(m_type); + update_preset_description_line(); + // Printer selected at the Printer tab, update "compatible" marks at the print and filament selectors. for (auto t: m_dependent_tabs) { @@ -834,16 +847,6 @@ void Tab::on_presets_changed() // clear m_dependent_tabs after first update from select_preset() // to avoid needless preset loading from update() function m_dependent_tabs.clear(); - - // #ys_FIXME_to_delete -// wxCommandEvent event(EVT_TAB_PRESETS_CHANGED); -// event.SetEventObject(this); -// wxPostEvent(this, event); - - // Instead of PostEvent (EVT_TAB_PRESETS_CHANGED) just call update_presets - wxGetApp().plater()->sidebar().update_presets(m_type); - - update_preset_description_line(); } void Tab::update_preset_description_line() @@ -1190,7 +1193,7 @@ void TabPrint::update() // return; // ! TODO Let delete this part of code after a common aplication testing m_update_cnt++; - Freeze(); +// Freeze(); double fill_density = m_config->option("fill_density")->value; @@ -1401,7 +1404,7 @@ void TabPrint::update() m_recommended_thin_wall_thickness_description_line->SetText( from_u8(PresetHints::recommended_thin_wall_thickness(*m_preset_bundle))); - Thaw(); +// Thaw(); m_update_cnt--; if (m_update_cnt==0) @@ -1496,6 +1499,7 @@ void TabFilament::build() line = optgroup->create_single_option_line("filament_ramming_parameters");// { _(L("Ramming")), "" }; line.widget = [this](wxWindow* parent) { auto ramming_dialog_btn = new wxButton(parent, wxID_ANY, _(L("Ramming settings"))+dots, wxDefaultPosition, wxDefaultSize, wxBU_EXACTFIT); + ramming_dialog_btn->SetFont(Slic3r::GUI::wxGetApp().normal_font()); auto sizer = new wxBoxSizer(wxHORIZONTAL); sizer->Add(ramming_dialog_btn); @@ -1576,7 +1580,7 @@ void TabFilament::update() return; // ys_FIXME m_update_cnt++; - Freeze(); +// Freeze(); wxString text = from_u8(PresetHints::cooling_description(m_presets->get_edited_preset())); m_cooling_description_line->SetText(text); text = from_u8(PresetHints::maximum_volumetric_flow_description(*m_preset_bundle)); @@ -1590,7 +1594,7 @@ void TabFilament::update() for (auto el : { "min_fan_speed", "disable_fan_first_layers" }) get_field(el)->toggle(fan_always_on); - Thaw(); +// Thaw(); m_update_cnt--; if (m_update_cnt == 0) @@ -1622,25 +1626,22 @@ bool Tab::current_preset_is_dirty() void TabPrinter::build_printhost(ConfigOptionsGroup *optgroup) { - const bool sla = m_presets->get_selected_preset().printer_technology() == ptSLA; + const PrinterTechnology tech = m_presets->get_selected_preset().printer_technology(); // Only offer the host type selection for FFF, for SLA it's always the SL1 printer (at the moment) - if (! sla) { + if (tech == ptFFF) { optgroup->append_single_option_line("host_type"); } - auto printhost_browse = [this, optgroup] (wxWindow* parent) { - - // TODO: SLA Bonjour - + auto printhost_browse = [=](wxWindow* parent) { auto btn = m_printhost_browse_btn = new wxButton(parent, wxID_ANY, _(L(" Browse "))+dots, wxDefaultPosition, wxDefaultSize, wxBU_LEFT); -// btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("zoom.png")), wxBITMAP_TYPE_PNG)); + btn->SetFont(Slic3r::GUI::wxGetApp().normal_font()); btn->SetBitmap(create_scaled_bitmap("zoom.png")); auto sizer = new wxBoxSizer(wxHORIZONTAL); sizer->Add(btn); - btn->Bind(wxEVT_BUTTON, [this, parent, optgroup](wxCommandEvent &e) { - BonjourDialog dialog(parent); + btn->Bind(wxEVT_BUTTON, [=](wxCommandEvent &e) { + BonjourDialog dialog(parent, tech); if (dialog.show_and_lookup()) { optgroup->set_value("print_host", std::move(dialog.get_selected()), true); optgroup->get_field("print_host")->field_changed(); @@ -1653,7 +1654,7 @@ void TabPrinter::build_printhost(ConfigOptionsGroup *optgroup) auto print_host_test = [this](wxWindow* parent) { auto btn = m_print_host_test_btn = new wxButton(parent, wxID_ANY, _(L("Test")), wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT); -// btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("wrench.png")), wxBITMAP_TYPE_PNG)); + btn->SetFont(Slic3r::GUI::wxGetApp().normal_font()); btn->SetBitmap(create_scaled_bitmap("wrench.png")); auto sizer = new wxBoxSizer(wxHORIZONTAL); sizer->Add(btn); @@ -1691,6 +1692,7 @@ void TabPrinter::build_printhost(ConfigOptionsGroup *optgroup) auto printhost_cafile_browse = [this, optgroup] (wxWindow* parent) { auto btn = new wxButton(parent, wxID_ANY, _(L(" Browse "))+dots, wxDefaultPosition, wxDefaultSize, wxBU_LEFT); // btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("zoom.png")), wxBITMAP_TYPE_PNG)); + btn->SetFont(Slic3r::GUI::wxGetApp().normal_font()); btn->SetBitmap(create_scaled_bitmap("zoom.png")); auto sizer = new wxBoxSizer(wxHORIZONTAL); sizer->Add(btn); @@ -1729,6 +1731,7 @@ void TabPrinter::build_printhost(ConfigOptionsGroup *optgroup) \tOn this system, Slic3r uses HTTPS certificates from the system Certificate Store or Keychain.\n\ \tTo use a custom CA file, please import your CA file into Certificate Store / Keychain.")), ca_file_hint)); + txt->SetFont(Slic3r::GUI::wxGetApp().normal_font()); auto sizer = new wxBoxSizer(wxHORIZONTAL); sizer->Add(txt); return sizer; @@ -1969,7 +1972,7 @@ void TabPrinter::build_sla() Line line = optgroup->create_single_option_line("bed_shape");//{ _(L("Bed shape")), "" }; line.widget = [this](wxWindow* parent) { auto btn = new wxButton(parent, wxID_ANY, _(L(" Set ")) + dots, wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT); - // btn->SetFont(Slic3r::GUI::small_font); + btn->SetFont(wxGetApp().small_font()); // btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("printer_empty.png")), wxBITMAP_TYPE_PNG)); btn->SetBitmap(create_scaled_bitmap("printer_empty.png")); @@ -2276,7 +2279,7 @@ void TabPrinter::update() void TabPrinter::update_fff() { - Freeze(); +// Freeze(); bool en; auto serial_speed = get_field("serial_speed"); @@ -2375,7 +2378,7 @@ void TabPrinter::update_fff() (have_multiple_extruders && toolchange_retraction); } - Thaw(); +// Thaw(); } void TabPrinter::update_sla() @@ -2469,7 +2472,7 @@ void Tab::load_current_preset() //Regerenerate content of the page tree. void Tab::rebuild_page_tree(bool tree_sel_change_event /*= false*/) { - Freeze(); +// Freeze(); // get label of the currently selected item const auto sel_item = m_treectrl->GetSelection(); @@ -2495,7 +2498,7 @@ void Tab::rebuild_page_tree(bool tree_sel_change_event /*= false*/) // this is triggered on first load, so we don't disable the sel change event m_treectrl->SelectItem(m_treectrl->GetFirstVisibleItem());//! (treectrl->GetFirstChild(rootItem)); } - Thaw(); +// Thaw(); } void Tab::update_page_tree_visibility() @@ -2609,7 +2612,7 @@ void Tab::select_preset(std::string preset_name) } else { if (current_dirty) m_presets->discard_current_changes(); - m_presets->select_preset_by_name(preset_name, false); + const bool is_selected = m_presets->select_preset_by_name(preset_name, false); // Mark the print & filament enabled if they are compatible with the currently selected preset. // The following method should not discard changes of current print or filament presets on change of a printer profile, // if they are compatible with the current printer. @@ -2618,6 +2621,28 @@ void Tab::select_preset(std::string preset_name) // Initialize the UI from the current preset. if (printer_tab) static_cast(this)->update_pages(); + + if (!is_selected && printer_tab) + { + /* There is a case, when : + * after Config Wizard applying we try to select previously selected preset, but + * in a current configuration this one: + * 1. doesn't exist now, + * 2. have another printer_technology + * So, it is necessary to update list of dependent tabs + * to the corresponding printer_technology + */ + const PrinterTechnology printer_technology = m_presets->get_edited_preset().printer_technology(); + if (printer_technology == ptFFF && m_dependent_tabs.front() != Preset::Type::TYPE_PRINT || + printer_technology == ptSLA && m_dependent_tabs.front() != Preset::Type::TYPE_SLA_PRINT ) + { + m_dependent_tabs.clear(); + if (printer_technology == ptFFF) + m_dependent_tabs = { Preset::Type::TYPE_PRINT, Preset::Type::TYPE_FILAMENT }; + else + m_dependent_tabs = { Preset::Type::TYPE_SLA_PRINT, Preset::Type::TYPE_SLA_MATERIAL }; + } + } load_current_preset(); } } @@ -2689,7 +2714,7 @@ void Tab::OnTreeSelChange(wxTreeEvent& event) #ifdef __linux__ std::unique_ptr no_updates(new wxWindowUpdateLocker(this)); #else - wxWindowUpdateLocker noUpdates(this); +// wxWindowUpdateLocker noUpdates(this); #endif if (m_pages.empty()) @@ -2709,17 +2734,22 @@ void Tab::OnTreeSelChange(wxTreeEvent& event) if (page == nullptr) return; for (auto& el : m_pages) - el.get()->Hide(); +// if (el.get()->IsShown()) { + el.get()->Hide(); +// break; +// } -#ifdef __linux__ - no_updates.reset(nullptr); -#endif - - page->Show(); - m_hsizer->Layout(); - Refresh(); + #ifdef __linux__ + no_updates.reset(nullptr); + #endif update_undo_buttons(); + page->Show(); +// if (! page->layout_valid) { + page->layout_valid = true; + m_hsizer->Layout(); + Refresh(); +// } } void Tab::OnKeyDown(wxKeyEvent& event) @@ -2859,7 +2889,9 @@ void Tab::update_ui_from_settings() wxSizer* Tab::compatible_widget_create(wxWindow* parent, PresetDependencies &deps) { deps.checkbox = new wxCheckBox(parent, wxID_ANY, _(L("All"))); + deps.checkbox->SetFont(Slic3r::GUI::wxGetApp().normal_font()); deps.btn = new wxButton(parent, wxID_ANY, _(L(" Set "))+dots, wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT); + deps.btn->SetFont(Slic3r::GUI::wxGetApp().normal_font()); // deps.btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("printer_empty.png")), wxBITMAP_TYPE_PNG)); deps.btn->SetBitmap(create_scaled_bitmap("printer_empty.png")); @@ -3055,6 +3087,7 @@ ConfigOptionsGroupShp Page::new_optgroup(const wxString& title, int noncommon_la } // auto bmp = new wxStaticBitmap(parent, wxID_ANY, bmp_name.empty() ? wxNullBitmap : wxBitmap(from_u8(var(bmp_name)), wxBITMAP_TYPE_PNG)); auto bmp = new wxStaticBitmap(parent, wxID_ANY, bmp_name.empty() ? wxNullBitmap : create_scaled_bitmap(bmp_name)); + bmp->SetBackgroundStyle(wxBG_STYLE_PAINT); return bmp; }; @@ -3270,7 +3303,8 @@ void TabSLAPrint::build() optgroup->append_single_option_line("support_pillar_diameter"); optgroup->append_single_option_line("support_pillar_connection_mode"); optgroup->append_single_option_line("support_buildplate_only"); - optgroup->append_single_option_line("support_pillar_widening_factor"); + // TODO: This parameter is not used at the moment. + // optgroup->append_single_option_line("support_pillar_widening_factor"); optgroup->append_single_option_line("support_base_diameter"); optgroup->append_single_option_line("support_base_height"); optgroup->append_single_option_line("support_object_elevation"); @@ -3278,6 +3312,7 @@ void TabSLAPrint::build() optgroup = page->new_optgroup(_(L("Connection of the support sticks and junctions"))); optgroup->append_single_option_line("support_critical_angle"); optgroup->append_single_option_line("support_max_bridge_length"); + optgroup->append_single_option_line("support_max_pillar_link_distance"); optgroup = page->new_optgroup(_(L("Automatic generation"))); optgroup->append_single_option_line("support_points_density_relative"); @@ -3336,11 +3371,37 @@ void TabSLAPrint::update() return; // #ys_FIXME // #ys_FIXME -// m_update_cnt++; -// ! something to update -// m_update_cnt--; -// -// if (m_update_cnt == 0) + m_update_cnt++; + + double head_penetration = m_config->opt_float("support_head_penetration"); + double head_width = m_config->opt_float("support_head_width"); + if(head_penetration > head_width) { + wxString msg_text = _(L("Head penetration should not be greater than the head width.")); + auto dialog = new wxMessageDialog(parent(), msg_text, _(L("Invalid Head penetration")), wxICON_WARNING | wxOK); + DynamicPrintConfig new_conf = *m_config; + if (dialog->ShowModal() == wxID_OK) { + new_conf.set_key_value("support_head_penetration", new ConfigOptionFloat(head_width)); + } + + load_config(new_conf); + } + + double pinhead_d = m_config->opt_float("support_head_front_diameter"); + double pillar_d = m_config->opt_float("support_pillar_diameter"); + if(pinhead_d > pillar_d) { + wxString msg_text = _(L("Pinhead diameter should be smaller than the pillar diameter.")); + auto dialog = new wxMessageDialog(parent(), msg_text, _(L("Invalid pinhead diameter")), wxICON_WARNING | wxOK); + DynamicPrintConfig new_conf = *m_config; + if (dialog->ShowModal() == wxID_OK) { + new_conf.set_key_value("support_head_front_diameter", new ConfigOptionFloat(pillar_d / 2.0)); + } + + load_config(new_conf); + } + + m_update_cnt--; + + if (m_update_cnt == 0) wxGetApp().mainframe->on_config_changed(m_config); } diff --git a/src/slic3r/GUI/Tab.hpp b/src/slic3r/GUI/Tab.hpp index 2f8cec1de..81a79c58c 100644 --- a/src/slic3r/GUI/Tab.hpp +++ b/src/slic3r/GUI/Tab.hpp @@ -65,6 +65,9 @@ public: bool m_is_modified_values{ false }; bool m_is_nonsys_values{ true }; + // Delayed layout after resizing the main window. + bool layout_valid = false; + public: std::vector m_optgroups; DynamicPrintConfig* m_config; diff --git a/src/slic3r/GUI/wxExtensions.cpp b/src/slic3r/GUI/wxExtensions.cpp index e83101d22..dee18ad43 100644 --- a/src/slic3r/GUI/wxExtensions.cpp +++ b/src/slic3r/GUI/wxExtensions.cpp @@ -1958,21 +1958,8 @@ int PrusaDoubleSlider::get_value_from_position(const wxCoord x, const wxCoord y) return int(m_min_value + double(height - SLIDER_MARGIN - y) / step + 0.5); } -void PrusaDoubleSlider::detect_selected_slider(const wxPoint& pt, const bool is_mouse_wheel /*= false*/) +void PrusaDoubleSlider::detect_selected_slider(const wxPoint& pt) { - if (is_mouse_wheel) - { - if (is_horizontal()) { - m_selection = pt.x <= m_rect_lower_thumb.GetRight() ? ssLower : - pt.x >= m_rect_higher_thumb.GetLeft() ? ssHigher : ssUndef; - } - else { - m_selection = pt.y >= m_rect_lower_thumb.GetTop() ? ssLower : - pt.y <= m_rect_higher_thumb.GetBottom() ? ssHigher : ssUndef; - } - return; - } - m_selection = is_point_in_rect(pt, m_rect_lower_thumb) ? ssLower : is_point_in_rect(pt, m_rect_higher_thumb) ? ssHigher : ssUndef; } @@ -2192,12 +2179,20 @@ void PrusaDoubleSlider::action_tick(const TicksAction action) void PrusaDoubleSlider::OnWheel(wxMouseEvent& event) { - wxClientDC dc(this); - wxPoint pos = event.GetLogicalPosition(dc); - detect_selected_slider(pos, true); - - if (m_selection == ssUndef) - return; + // Set nearest to the mouse thumb as a selected, if there is not selected thumb + if (m_selection == ssUndef) + { + const wxPoint& pt = event.GetLogicalPosition(wxClientDC(this)); + + if (is_horizontal()) + m_selection = abs(pt.x - m_rect_lower_thumb.GetRight()) <= + abs(pt.x - m_rect_higher_thumb.GetLeft()) ? + ssLower : ssHigher; + else + m_selection = abs(pt.y - m_rect_lower_thumb.GetTop()) <= + abs(pt.y - m_rect_higher_thumb.GetBottom()) ? + ssLower : ssHigher; + } move_current_thumb(event.GetWheelRotation() > 0); } diff --git a/src/slic3r/GUI/wxExtensions.hpp b/src/slic3r/GUI/wxExtensions.hpp index e0bd5d091..a15bee256 100644 --- a/src/slic3r/GUI/wxExtensions.hpp +++ b/src/slic3r/GUI/wxExtensions.hpp @@ -771,7 +771,7 @@ protected: void draw_thumb_text(wxDC& dc, const wxPoint& pos, const SelectedSlider& selection) const; void update_thumb_rect(const wxCoord& begin_x, const wxCoord& begin_y, const SelectedSlider& selection); - void detect_selected_slider(const wxPoint& pt, const bool is_mouse_wheel = false); + void detect_selected_slider(const wxPoint& pt); void correct_lower_value(); void correct_higher_value(); void move_current_thumb(const bool condition); diff --git a/src/slic3r/Utils/Bonjour.cpp b/src/slic3r/Utils/Bonjour.cpp index 4953cfc64..28b3b2228 100644 --- a/src/slic3r/Utils/Bonjour.cpp +++ b/src/slic3r/Utils/Bonjour.cpp @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include @@ -33,7 +34,9 @@ namespace Slic3r { // the implementations has been tested with AFL. -// Relevant RFC: https://www.ietf.org/rfc/rfc6762.txt +// Relevant RFCs: +// https://tools.ietf.org/html/rfc6762.txt +// https://tools.ietf.org/html/rfc6763.txt struct DnsName: public std::string @@ -156,9 +159,9 @@ struct DnsQuestion uint16_t type; uint16_t qclass; - DnsQuestion() : - type(0), - qclass(0) + DnsQuestion() + : type(0) + , qclass(0) {} static optional decode(const std::vector &buffer, size_t &offset) @@ -187,10 +190,10 @@ struct DnsResource uint32_t ttl; std::vector data; - DnsResource() : - type(0), - rclass(0), - ttl(0) + DnsResource() + : type(0) + , rclass(0) + , ttl(0) {} static optional decode(const std::vector &buffer, size_t &offset, size_t &dataoffset) @@ -310,9 +313,9 @@ struct DnsRR_TXT TAG = 0x10, }; - std::vector values; + BonjourReply::TxtData data; - static optional decode(const DnsResource &rr) + static optional decode(const DnsResource &rr, const Bonjour::TxtKeys &txt_keys) { const size_t size = rr.data.size(); if (size < 2) { @@ -328,11 +331,21 @@ struct DnsRR_TXT } ++it; - std::string value(val_size, ' '); - std::copy(it, it + val_size, value.begin()); - res.values.push_back(std::move(value)); + const auto it_end = it + val_size; + const auto it_eq = std::find(it, it_end, '='); + if (it_eq > it && it_eq < it_end - 1) { + std::string key(it_eq - it, ' '); + std::copy(it, it_eq, key.begin()); - it += val_size; + if (txt_keys.find(key) != txt_keys.end() || key == "path") { + // This key-value has been requested for + std::string value(it_end - it_eq - 1, ' '); + std::copy(it_eq + 1, it_end, value.begin()); + res.data.insert(std::make_pair(std::move(key), std::move(value))); + } + } + + it = it_end; } return std::move(res); @@ -389,7 +402,7 @@ struct DnsMessage DnsSDMap sdmap; - static optional decode(const std::vector &buffer) + static optional decode(const std::vector &buffer, const Bonjour::TxtKeys &txt_keys) { const auto size = buffer.size(); if (size < DnsHeader::SIZE + DnsQuestion::MIN_SIZE || size > MAX_SIZE) { @@ -414,14 +427,15 @@ struct DnsMessage if (!rr) { return boost::none; } else { - res.parse_rr(buffer, std::move(*rr), dataoffset); + res.parse_rr(buffer, std::move(*rr), dataoffset, txt_keys); } } return std::move(res); } + private: - void parse_rr(const std::vector &buffer, DnsResource &&rr, size_t dataoffset) + void parse_rr(const std::vector &buffer, DnsResource &&rr, size_t dataoffset, const Bonjour::TxtKeys &txt_keys) { switch (rr.type) { case DnsRR_A::TAG: DnsRR_A::decode(this->rr_a, rr); break; @@ -432,7 +446,7 @@ private: break; } case DnsRR_TXT::TAG: { - auto txt = DnsRR_TXT::decode(rr); + auto txt = DnsRR_TXT::decode(rr, txt_keys); if (txt) { this->sdmap.insert_txt(std::move(rr.name), std::move(*txt)); } break; } @@ -442,26 +456,28 @@ private: std::ostream& operator<<(std::ostream &os, const DnsMessage &msg) { - os << "DnsMessage(ID: " << msg.header.id << ", " - << "Q: " << (msg.question ? msg.question->name.c_str() : "none") << ", " - << "A: " << (msg.rr_a ? msg.rr_a->ip.to_string() : "none") << ", " - << "AAAA: " << (msg.rr_aaaa ? msg.rr_aaaa->ip.to_string() : "none") << ", " - << "services: ["; + os << boost::format("DnsMessage(ID: %1%, Q: %2%, A: %3%, AAAA: %4%, services: [") + % msg.header.id + % (msg.question ? msg.question->name.c_str() : "none") + % (msg.rr_a ? msg.rr_a->ip.to_string() : "none") + % (msg.rr_aaaa ? msg.rr_aaaa->ip.to_string() : "none"); - enum { SRV_PRINT_MAX = 3 }; - unsigned i = 0; - for (const auto &sdpair : msg.sdmap) { - os << sdpair.first << ", "; + enum { SRV_PRINT_MAX = 3 }; + unsigned i = 0; + for (const auto &sdpair : msg.sdmap) { + if (i > 0) { os << ", "; } - if (++i >= SRV_PRINT_MAX) { - os << "..."; - break; - } + if (i < SRV_PRINT_MAX) { + os << sdpair.first; + } else { + os << "..."; + break; } - os << "])"; + i++; + } - return os; + return os << "])"; } @@ -525,8 +541,9 @@ optional BonjourRequest::make(const std::string &service, const struct Bonjour::priv { const std::string service; - const std::string protocol; - const std::string service_dn; + std::string protocol; + std::string service_dn; + TxtKeys txt_keys; unsigned timeout; unsigned retries; @@ -535,19 +552,18 @@ struct Bonjour::priv Bonjour::ReplyFn replyfn; Bonjour::CompleteFn completefn; - priv(std::string service, std::string protocol); + priv(std::string &&service); std::string strip_service_dn(const std::string &service_name) const; void udp_receive(udp::endpoint from, size_t bytes); void lookup_perform(); }; -Bonjour::priv::priv(std::string service, std::string protocol) : - service(std::move(service)), - protocol(std::move(protocol)), - service_dn((boost::format("_%1%._%2%.local") % this->service % this->protocol).str()), - timeout(10), - retries(1) +Bonjour::priv::priv(std::string &&service) + : service(std::move(service)) + , protocol("tcp") + , timeout(10) + , retries(1) { buffer.resize(DnsMessage::MAX_SIZE); } @@ -573,13 +589,13 @@ void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes) } buffer.resize(bytes); - const auto dns_msg = DnsMessage::decode(buffer); + auto dns_msg = DnsMessage::decode(buffer, txt_keys); if (dns_msg) { asio::ip::address ip = from.address(); if (dns_msg->rr_a) { ip = dns_msg->rr_a->ip; } else if (dns_msg->rr_aaaa) { ip = dns_msg->rr_aaaa->ip; } - for (const auto &sdpair : dns_msg->sdmap) { + for (auto &sdpair : dns_msg->sdmap) { if (! sdpair.second.srv) { continue; } @@ -590,20 +606,12 @@ void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes) std::string path; std::string version; + BonjourReply::TxtData txt_data; if (sdpair.second.txt) { - static const std::string tag_path = "path="; - static const std::string tag_version = "version="; - - for (const auto &value : sdpair.second.txt->values) { - if (value.size() > tag_path.size() && value.compare(0, tag_path.size(), tag_path) == 0) { - path = std::move(value.substr(tag_path.size())); - } else if (value.size() > tag_version.size() && value.compare(0, tag_version.size(), tag_version) == 0) { - version = std::move(value.substr(tag_version.size())); - } - } + txt_data = std::move(sdpair.second.txt->data); } - BonjourReply reply(ip, srv.port, std::move(service_name), srv.hostname, std::move(path), std::move(version)); + BonjourReply reply(ip, srv.port, std::move(service_name), srv.hostname, std::move(txt_data)); replyfn(std::move(reply)); } } @@ -611,6 +619,8 @@ void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes) void Bonjour::priv::lookup_perform() { + service_dn = (boost::format("_%1%._%2%.local") % service % protocol).str(); + const auto brq = BonjourRequest::make(service, protocol); if (!brq) { return; @@ -671,21 +681,29 @@ void Bonjour::priv::lookup_perform() // API - public part -BonjourReply::BonjourReply(boost::asio::ip::address ip, uint16_t port, std::string service_name, std::string hostname, std::string path, std::string version) : - ip(std::move(ip)), - port(port), - service_name(std::move(service_name)), - hostname(std::move(hostname)), - path(path.empty() ? std::move(std::string("/")) : std::move(path)), - version(version.empty() ? std::move(std::string("Unknown")) : std::move(version)) +BonjourReply::BonjourReply(boost::asio::ip::address ip, uint16_t port, std::string service_name, std::string hostname, BonjourReply::TxtData txt_data) + : ip(std::move(ip)) + , port(port) + , service_name(std::move(service_name)) + , hostname(std::move(hostname)) + , txt_data(std::move(txt_data)) { std::string proto; std::string port_suffix; if (port == 443) { proto = "https://"; } if (port != 443 && port != 80) { port_suffix = std::to_string(port).insert(0, 1, ':'); } - if (this->path[0] != '/') { this->path.insert(0, 1, '/'); } + + std::string path = this->path(); + if (path[0] != '/') { path.insert(0, 1, '/'); } full_address = proto + ip.to_string() + port_suffix; - if (this->path != "/") { full_address += path; } + if (path != "/") { full_address += path; } + txt_data["path"] = std::move(path); +} + +std::string BonjourReply::path() const +{ + const auto it = txt_data.find("path"); + return it != txt_data.end() ? it->second : std::string("/"); } bool BonjourReply::operator==(const BonjourReply &other) const @@ -707,14 +725,22 @@ bool BonjourReply::operator<(const BonjourReply &other) const std::ostream& operator<<(std::ostream &os, const BonjourReply &reply) { - os << "BonjourReply(" << reply.ip.to_string() << ", " << reply.service_name << ", " - << reply.hostname << ", " << reply.path << ", " << reply.version << ")"; - return os; + os << boost::format("BonjourReply(%1%, %2%, %3%, %4%") + % reply.ip.to_string() + % reply.service_name + % reply.hostname + % reply.full_address; + + for (const auto &kv : reply.txt_data) { + os << boost::format(", %1%=%2%") % kv.first % kv.second; + } + + return os << ')'; } -Bonjour::Bonjour(std::string service, std::string protocol) : - p(new priv(std::move(service), std::move(protocol))) +Bonjour::Bonjour(std::string service) + : p(new priv(std::move(service))) {} Bonjour::Bonjour(Bonjour &&other) : p(std::move(other.p)) {} @@ -726,6 +752,18 @@ Bonjour::~Bonjour() } } +Bonjour& Bonjour::set_protocol(std::string protocol) +{ + if (p) { p->protocol = std::move(protocol); } + return *this; +} + +Bonjour& Bonjour::set_txt_keys(TxtKeys txt_keys) +{ + if (p) { p->txt_keys = std::move(txt_keys); } + return *this; +} + Bonjour& Bonjour::set_timeout(unsigned timeout) { if (p) { p->timeout = timeout; } diff --git a/src/slic3r/Utils/Bonjour.hpp b/src/slic3r/Utils/Bonjour.hpp index 63f34638c..e61cd1833 100644 --- a/src/slic3r/Utils/Bonjour.hpp +++ b/src/slic3r/Utils/Bonjour.hpp @@ -4,6 +4,8 @@ #include #include #include +#include +#include #include #include @@ -13,16 +15,24 @@ namespace Slic3r { struct BonjourReply { + typedef std::unordered_map TxtData; + boost::asio::ip::address ip; uint16_t port; std::string service_name; std::string hostname; std::string full_address; - std::string path; - std::string version; + + TxtData txt_data; BonjourReply() = delete; - BonjourReply(boost::asio::ip::address ip, uint16_t port, std::string service_name, std::string hostname, std::string path, std::string version); + BonjourReply(boost::asio::ip::address ip, + uint16_t port, + std::string service_name, + std::string hostname, + TxtData txt_data); + + std::string path() const; bool operator==(const BonjourReply &other) const; bool operator<(const BonjourReply &other) const; @@ -39,11 +49,17 @@ public: typedef std::shared_ptr Ptr; typedef std::function ReplyFn; typedef std::function CompleteFn; + typedef std::set TxtKeys; - Bonjour(std::string service, std::string protocol = "tcp"); + Bonjour(std::string service); Bonjour(Bonjour &&other); ~Bonjour(); + // Set requested service protocol, "tcp" by default + Bonjour& set_protocol(std::string protocol); + // Set which TXT key-values should be collected + // Note that "path" is always collected + Bonjour& set_txt_keys(TxtKeys txt_keys); Bonjour& set_timeout(unsigned timeout); Bonjour& set_retries(unsigned retries); // ^ Note: By default there is 1 retry (meaning 1 broadcast is sent). diff --git a/src/slic3r_app_msvc.cpp b/src/slic3r_app_msvc.cpp index ff5ad6cfa..48c166406 100644 --- a/src/slic3r_app_msvc.cpp +++ b/src/slic3r_app_msvc.cpp @@ -206,11 +206,8 @@ int wmain(int argc, wchar_t **argv) std::vector argv_extended; argv_extended.emplace_back(argv[0]); -#ifdef SLIC3R_WRAPPER_GUI - std::wstring cmd_gui = L"--gui"; - argv_extended.emplace_back(const_cast(cmd_gui.data())); -#endif - for (int i = 1; i < argc; ++i) + // Here one may push some additional parameters based on the wrapper type. + for (int i = 1; i < argc; ++ i) argv_extended.emplace_back(argv[i]); argv_extended.emplace_back(nullptr); diff --git a/version.inc b/version.inc index 0e84a48a2..18ac508b2 100644 --- a/version.inc +++ b/version.inc @@ -2,7 +2,7 @@ # (the version numbers are generated by the build script from the git current label) set(SLIC3R_FORK_NAME "Slic3r Prusa Edition") -set(SLIC3R_VERSION "1.42.0-alpha7") +set(SLIC3R_VERSION "1.42.0-beta") set(SLIC3R_BUILD "${SLIC3R_VERSION}+UNKNOWN") set(SLIC3R_BUILD_ID "${SLIC3R_BUILD_ID}") set(SLIC3R_RC_VERSION "1,42,0,0") diff --git a/xs/src/perlglue.cpp b/xs/src/perlglue.cpp index bcf84b957..463f7d21b 100644 --- a/xs/src/perlglue.cpp +++ b/xs/src/perlglue.cpp @@ -115,6 +115,8 @@ SV* ConfigOption_to_SV(const ConfigOption &opt, const ConfigOptionDef &def) } case coPoint: return perl_to_SV_clone_ref(static_cast(&opt)->value); + case coPoint3: + return perl_to_SV_clone_ref(static_cast(&opt)->value); case coPoints: { auto optv = static_cast(&opt); @@ -248,6 +250,9 @@ bool ConfigBase__set(ConfigBase* THIS, const t_config_option_key &opt_key, SV* v } case coPoint: return from_SV_check(value, &static_cast(opt)->value); +// case coPoint3: + // not gonna fix it, die Perl die! +// return from_SV_check(value, &static_cast(opt)->value); case coPoints: { std::vector &values = static_cast(opt)->values; diff --git a/xs/xsp/Config.xsp b/xs/xsp/Config.xsp index d5d295839..f9482bd3b 100644 --- a/xs/xsp/Config.xsp +++ b/xs/xsp/Config.xsp @@ -159,6 +159,8 @@ print_config_def() opt_type = "s@"; } else if (optdef->type == coPoint || optdef->type == coPoints) { opt_type = "point"; + } else if (optdef->type == coPoint3) { + opt_type = "point3"; } else if (optdef->type == coBool || optdef->type == coBools) { opt_type = "bool"; } else if (optdef->type == coEnum) {