Added MINI and Creality Ender to ConfigWizard

resources/profiles/Creality.ini

@@ -0,0 +1,415 @@
+# Print profiles for the Creality printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Creality
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.1
+# Where to get the updates from?
+config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
+# changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:ENDER3]
+name = Creality Ender-3
+variants = 0.4
+technology = FFF
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirts = 1
+skirt_distance = 2
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.4
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 40
+travel_speed = 100
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:*0.12mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.12
+perimeters = 3
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.20
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.12mm DETAIL ENDER3]
+inherits = *0.12mm*
+alias=0.12mm DETAIL
+travel_speed = 150
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
+
+[print:0.20mm NORMAL ENDER3]
+inherits = *0.20mm*
+alias=0.20mm NORMAL
+travel_speed = 150
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
+
+[print:0.24mm DRAFT ENDER3]
+inherits = *0.24mm*
+alias=0.24mm DRAFT
+travel_speed = 150
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
+
+# Common filament preset
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+compatible_printers_condition = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 40
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 40
+first_layer_temperature = 215
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+temperature = 210
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature =70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_max_volumetric_speed = 11
+filament_type = PLA
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 245
+
+[filament:Generic PLA ENDER3]
+inherits = *PLA*
+alias=Generic PLA
+
+[filament:Generic PET ENDER3]
+inherits = *PET*
+alias=Generic PET
+
+[filament:Generic ABS ENDER3]
+inherits = *ABS*
+alias=Generic ABS
+first_layer_bed_temperature = 90		
+bed_temperature = 90
+
+[filament:Creality PLA ENDER3]
+inherits = *PLA*
+alias=Creality PLA
+temperature = 205
+bed_temperature = 40
+first_layer_temperature = 210
+first_layer_bed_temperature =40
+
+[filament:Creality PET ENDER3]
+inherits = *PET*
+alias=Creality PET
+temperature = 240
+bed_temperature = 70
+first_layer_temperature = 240
+first_layer_bed_temperature =70
+max_fan_speed = 40
+min_fan_speed = 20
+
+[filament:Creality ABS ENDER3]
+inherits = *ABS*
+alias=Creality ABS
+temperature = 240
+bed_temperature = 90
+first_layer_temperature = 240
+first_layer_bed_temperature =90
+
+[filament:Prusament PLA ENDER3]
+inherits = *PLA*
+alias=Prusament PLA
+temperature = 215
+bed_temperature = 40
+first_layer_temperature = 215
+first_layer_bed_temperature =40
+filament_cost = 24.99
+filament_density = 1.24
+
+[filament:Prusament PETG ENDER3]
+inherits = *PET*
+alias=Prusament PETG
+temperature = 245
+bed_temperature = 70
+first_layer_temperature = 245
+first_layer_bed_temperature =70
+filament_cost = 24.99
+filament_density = 1.27
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 2000
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 20
+machine_max_jerk_y = 20
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.3
+min_layer_height = 0.07
+max_print_height = 200
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 Z0.15 F240\nG1 X60.0 E9.0  F800.0 ; intro line\nG1 X100.0 E12.5 F800 ; intro line\nG92 E0.0
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 F3000 ; home X axis\nM84 ; disable motors
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model = 
+default_print_profile = 
+default_filament_profile = 
+
+[printer:Creality ENDER-3]
+inherits = *common*
+printer_model = ENDER3
+printer_variant = 0.4
+max_layer_height = 0.25
+min_layer_height = 0.1
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+printer_notes = 
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_length = 5
+retract_speed = 60
+deretract_speed = 40
+retract_before_wipe = 70%
+default_print_profile = 0.20mm NORMAL
+default_filament_profile = Creality PLA
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors

src/slic3r/GUI/ConfigWizard.cpp

@@ -166,6 +166,8 @@ PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxSt
     int max_row_width = 0;
     int current_row_width = 0;
 
+    bool is_variants = false;
+
     for (const auto &model : models) {
         if (! filter(model)) { continue; }
 
@@ -220,6 +222,7 @@ PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxSt
                 auto *alt_label = new wxStaticText(variants_panel, wxID_ANY, _(L("Alternate nozzles:")));
                 alt_label->SetFont(font_alt_nozzle);
                 variants_sizer->Add(alt_label, 0, wxBOTTOM, 3);
+                is_variants = true;
             }
 
             auto *cbox = new Checkbox(variants_panel, label, model_id, variant.name);
@@ -280,10 +283,10 @@ PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxSt
     }
     title_sizer->AddStretchSpacer();
 
-    if (titles.size() > 1) {
+    if (/*titles.size() > 1*/is_variants) {
         // It only makes sense to add the All / None buttons if there's multiple printers
 
-        auto *sel_all_std = new wxButton(this, wxID_ANY, _(L("All standard")));
+        auto *sel_all_std = new wxButton(this, wxID_ANY, titles.size() > 1 ? _(L("All standard")) : _(L("Standard")));
         auto *sel_all = new wxButton(this, wxID_ANY, _(L("All")));
         auto *sel_none = new wxButton(this, wxID_ANY, _(L("None")));
         sel_all_std->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(true, false); });