3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

MainFrame.pm is marked by L() to localization.

Browse source
This commit is contained in:
YuSanka 2018-02-21 13:44:42 +01:00
parent faca2d027b
commit 916378097c
1 changed files with 71 additions and 70 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

141
lib/Slic3r/GUI/MainFrame.pm
View file

@ -14,6 +14,8 @@ use Wx qw(:frame :bitmap :id :misc :notebook :panel :sizer :menu :dialog :filedi
use Wx::Event qw(EVT_CLOSE EVT_COMMAND EVT_MENU EVT_NOTEBOOK_PAGE_CHANGED);
use base 'Wx::Frame';
use Wx::Locale gettext => 'L';
our $qs_last_input_file;
our $qs_last_output_file;
our $last_config;
@ -60,7 +62,7 @@ sub new {
# initialize status bar
$self->{statusbar} = Slic3r::GUI::ProgressStatusBar->new($self, -1);
$self->{statusbar}->SetStatusText("Version $Slic3r::VERSION - Remember to check for updates at http://github.com/prusa3d/slic3r/releases");
$self->{statusbar}->SetStatusText(L("Version ").$Slic3r::VERSION.L(" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"));
$self->SetStatusBar($self->{statusbar});
$self->{loaded} = 1;
@ -112,9 +114,9 @@ sub _init_tabpanel {
});
if (!$self->{no_plater}) {
$panel->AddPage($self->{plater} = Slic3r::GUI::Plater->new($panel), "Plater");
$panel->AddPage($self->{plater} = Slic3r::GUI::Plater->new($panel), L("Plater"));
if (!$self->{no_controller}) {
$panel->AddPage($self->{controller} = Slic3r::GUI::Controller->new($panel), "Controller");
$panel->AddPage($self->{controller} = Slic3r::GUI::Controller->new($panel), L("Controller"));
}
}
@ -186,7 +188,7 @@ sub _init_tabpanel {
$tab->load_key_value('octoprint_host', $dlg->GetValue . ":" . $dlg->GetPort)
if $dlg->ShowModal == wxID_OK;
} else {
Wx::MessageDialog->new($self, 'No Bonjour device found', 'Device Browser', wxOK | wxICON_INFORMATION)->ShowModal;
Wx::MessageDialog->new($self, L('No Bonjour device found'), L('Device Browser'), wxOK | wxICON_INFORMATION)->ShowModal;
}
});
# The following event is emited by the C++ Tab implementation ,
@ -205,11 +207,11 @@ sub _init_tabpanel {
'X-Api-Key' => $config->octoprint_apikey,
);
if ($res->is_success) {
Slic3r::GUI::show_info($self, "Connection to OctoPrint works correctly.", "Success!");
Slic3r::GUI::show_info($self, L("Connection to OctoPrint works correctly."), _L("Success!"));
} else {
Slic3r::GUI::show_error($self,
"I wasn't able to connect to OctoPrint (" . $res->status_line . "). "
. "Check hostname and OctoPrint version (at least 1.1.0 is required).");
L("I wasn't able to connect to OctoPrint (") . $res->status_line .
L("). Check hostname and OctoPrint version (at least 1.1.0 is required)."));
}
});
# A variable to inform C++ Tab implementation about disabling of Browse button
@ -245,59 +247,59 @@ sub _init_menubar {
# File menu
my $fileMenu = Wx::Menu->new;
{
wxTheApp->append_menu_item($fileMenu, "Open STL/OBJ/AMF…\tCtrl+O", 'Open a model', sub {
wxTheApp->append_menu_item($fileMenu, L("Open STL/OBJ/AMF…\tCtrl+O"), L('Open a model'), sub {
$self->{plater}->add if $self->{plater};
}, undef, undef); #'brick_add.png');
$self->_append_menu_item($fileMenu, "&Load Config…\tCtrl+L", 'Load exported configuration file', sub {
$self->_append_menu_item($fileMenu, L("&Load Config…\tCtrl+L"), L('Load exported configuration file'), sub {
$self->load_config_file;
}, undef, 'plugin_add.png');
$self->_append_menu_item($fileMenu, "&Export Config…\tCtrl+E", 'Export current configuration to file', sub {
$self->_append_menu_item($fileMenu, L("&Export Config…\tCtrl+E"), L('Export current configuration to file'), sub {
$self->export_config;
}, undef, 'plugin_go.png');
$self->_append_menu_item($fileMenu, "&Load Config Bundle…", 'Load presets from a bundle', sub {
$self->_append_menu_item($fileMenu, L("&Load Config Bundle…"), L('Load presets from a bundle'), sub {
$self->load_configbundle;
}, undef, 'lorry_add.png');
$self->_append_menu_item($fileMenu, "&Export Config Bundle…", 'Export all presets to file', sub {
$self->_append_menu_item($fileMenu, L("&Export Config Bundle…"), L('Export all presets to file'), sub {
$self->export_configbundle;
}, undef, 'lorry_go.png');
$fileMenu->AppendSeparator();
my $repeat;
$self->_append_menu_item($fileMenu, "Q&uick Slice…\tCtrl+U", 'Slice a file into a G-code', sub {
$self->_append_menu_item($fileMenu, L("Q&uick Slice…\tCtrl+U"), L('Slice a file into a G-code'), sub {
wxTheApp->CallAfter(sub {
$self->quick_slice;
$repeat->Enable(defined $Slic3r::GUI::MainFrame::last_input_file);
});
}, undef, 'cog_go.png');
$self->_append_menu_item($fileMenu, "Quick Slice and Save &As…\tCtrl+Alt+U", 'Slice a file into a G-code, save as', sub {
$self->_append_menu_item($fileMenu, L("Quick Slice and Save &As…\tCtrl+Alt+U"), L('Slice a file into a G-code, save as'), sub {
wxTheApp->CallAfter(sub {
$self->quick_slice(save_as => 1);
$repeat->Enable(defined $Slic3r::GUI::MainFrame::last_input_file);
});
}, undef, 'cog_go.png');
$repeat = $self->_append_menu_item($fileMenu, "&Repeat Last Quick Slice\tCtrl+Shift+U", 'Repeat last quick slice', sub {
$repeat = $self->_append_menu_item($fileMenu, L("&Repeat Last Quick Slice\tCtrl+Shift+U"), L('Repeat last quick slice'), sub {
wxTheApp->CallAfter(sub {
$self->quick_slice(reslice => 1);
});
}, undef, 'cog_go.png');
$repeat->Enable(0);
$fileMenu->AppendSeparator();
$self->_append_menu_item($fileMenu, "Slice to SV&G…\tCtrl+G", 'Slice file to a multi-layer SVG', sub {
$self->_append_menu_item($fileMenu, L("Slice to SV&G…\tCtrl+G"), L('Slice file to a multi-layer SVG'), sub {
$self->quick_slice(save_as => 1, export_svg => 1);
}, undef, 'shape_handles.png');
$self->{menu_item_reslice_now} = $self->_append_menu_item(
$fileMenu, "(&Re)Slice Now\tCtrl+S", 'Start new slicing process',
$fileMenu, L("(&Re)Slice Now\tCtrl+S"), L('Start new slicing process'),
sub { $self->reslice_now; }, undef, 'shape_handles.png');
$fileMenu->AppendSeparator();
$self->_append_menu_item($fileMenu, "Repair STL file…", 'Automatically repair an STL file', sub {
$self->_append_menu_item($fileMenu, L("Repair STL file…"), L('Automatically repair an STL file'), sub {
$self->repair_stl;
}, undef, 'wrench.png');
$fileMenu->AppendSeparator();
# Cmd+, is standard on OS X - what about other operating systems?
$self->_append_menu_item($fileMenu, "Preferences…\tCtrl+,", 'Application preferences', sub {
$self->_append_menu_item($fileMenu, L("Preferences…\tCtrl+,"), L('Application preferences'), sub {
Slic3r::GUI::Preferences->new($self)->ShowModal;
}, wxID_PREFERENCES);
$fileMenu->AppendSeparator();
$self->_append_menu_item($fileMenu, "&Quit", 'Quit Slic3r', sub {
$self->_append_menu_item($fileMenu, L("&Quit"), L('Quit Slic3r'), sub {
$self->Close(0);
}, wxID_EXIT);
}
@ -307,16 +309,16 @@ sub _init_menubar {
my $plater = $self->{plater};
$self->{plater_menu} = Wx::Menu->new;
$self->_append_menu_item($self->{plater_menu}, "Export G-code...", 'Export current plate as G-code', sub {
$self->_append_menu_item($self->{plater_menu}, L("Export G-code..."), L('Export current plate as G-code'), sub {
$plater->export_gcode;
}, undef, 'cog_go.png');
$self->_append_menu_item($self->{plater_menu}, "Export plate as STL...", 'Export current plate as STL', sub {
$self->_append_menu_item($self->{plater_menu}, L("Export plate as STL..."), L('Export current plate as STL'), sub {
$plater->export_stl;
}, undef, 'brick_go.png');
$self->_append_menu_item($self->{plater_menu}, "Export plate as AMF...", 'Export current plate as AMF', sub {
$self->_append_menu_item($self->{plater_menu}, L("Export plate as AMF..."), L('Export current plate as AMF'), sub {
$plater->export_amf;
}, undef, 'brick_go.png');
$self->_append_menu_item($self->{plater_menu}, "Export plate as 3MF...", 'Export current plate as 3MF', sub {
$self->_append_menu_item($self->{plater_menu}, L("Export plate as 3MF..."), L('Export current plate as 3MF'), sub {
$plater->export_3mf;
}, undef, 'brick_go.png');
@ -329,13 +331,13 @@ sub _init_menubar {
{
my $tab_offset = 0;
if (!$self->{no_plater}) {
$self->_append_menu_item($windowMenu, "Select &Plater Tab\tCtrl+1", 'Show the plater', sub {
$self->_append_menu_item($windowMenu, L("Select &Plater Tab\tCtrl+1"), L('Show the plater'), sub {
$self->select_tab(0);
}, undef, 'application_view_tile.png');
$tab_offset += 1;
}
if (!$self->{no_controller}) {
$self->_append_menu_item($windowMenu, "Select &Controller Tab\tCtrl+T", 'Show the printer controller', sub {
$self->_append_menu_item($windowMenu, L("Select &Controller Tab\tCtrl+T"), L('Show the printer controller'), sub {
$self->select_tab(1);
}, undef, 'printer_empty.png');
$tab_offset += 1;
@ -343,13 +345,13 @@ sub _init_menubar {
if ($tab_offset > 0) {
$windowMenu->AppendSeparator();
}
$self->_append_menu_item($windowMenu, "Select P&rint Settings Tab\tCtrl+2", 'Show the print settings', sub {
$self->_append_menu_item($windowMenu, L("Select P&rint Settings Tab\tCtrl+2"), L('Show the print settings'), sub {
$self->select_tab($tab_offset+0);
}, undef, 'cog.png');
$self->_append_menu_item($windowMenu, "Select &Filament Settings Tab\tCtrl+3", 'Show the filament settings', sub {
$self->_append_menu_item($windowMenu, L("Select &Filament Settings Tab\tCtrl+3"), L('Show the filament settings'), sub {
$self->select_tab($tab_offset+1);
}, undef, 'spool.png');
$self->_append_menu_item($windowMenu, "Select Print&er Settings Tab\tCtrl+4", 'Show the printer settings', sub {
$self->_append_menu_item($windowMenu, L("Select Print&er Settings Tab\tCtrl+4"), L('Show the printer settings'), sub {
$self->select_tab($tab_offset+2);
}, undef, 'printer_empty.png');
}
@ -361,47 +363,47 @@ sub _init_menubar {
# as the simple numeric accelerators spoil all numeric data entry.
# The camera control accelerators are captured by 3DScene Perl module instead.
my $accel = ($^O eq 'MSWin32') ? sub { $_[0] . "\t\xA0" . $_[1] } : sub { $_[0] };
$self->_append_menu_item($self->{viewMenu}, $accel->('Iso', '0'), 'Iso View' , sub { $self->select_view('iso' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Top', '1'), 'Top View' , sub { $self->select_view('top' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Bottom', '2'), 'Bottom View' , sub { $self->select_view('bottom' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Front', '3'), 'Front View' , sub { $self->select_view('front' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Rear', '4'), 'Rear View' , sub { $self->select_view('rear' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Left', '5'), 'Left View' , sub { $self->select_view('left' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->('Right', '6'), 'Right View' , sub { $self->select_view('right' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Iso'), '0'), L('Iso View') , sub { $self->select_view('iso' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Top'), '1'), L('Top View') , sub { $self->select_view('top' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Bottom'), '2'), L('Bottom View') , sub { $self->select_view('bottom' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Front'), '3'), L('Front View') , sub { $self->select_view('front' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Rear'), '4'), L('Rear View') , sub { $self->select_view('rear' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Left'), '5'), L('Left View') , sub { $self->select_view('left' ); });
$self->_append_menu_item($self->{viewMenu}, $accel->(L('Right'), '6'), L('Right View') , sub { $self->select_view('right' ); });
}
# Help menu
my $helpMenu = Wx::Menu->new;
{
$self->_append_menu_item($helpMenu, "&Configuration $Slic3r::GUI::ConfigWizard::wizard…", "Run Configuration $Slic3r::GUI::ConfigWizard::wizard", sub {
$self->_append_menu_item($helpMenu, L("&Configuration $Slic3r::GUI::ConfigWizard::wizard…"), L("Run Configuration $Slic3r::GUI::ConfigWizard::wizard"), sub {
# Run the config wizard, offer the "reset user profile" checkbox.
$self->config_wizard(0);
});
$helpMenu->AppendSeparator();
$self->_append_menu_item($helpMenu, "Prusa 3D Drivers", 'Open the Prusa3D drivers download page in your browser', sub {
$self->_append_menu_item($helpMenu, L("Prusa 3D Drivers"), L('Open the Prusa3D drivers download page in your browser'), sub {
Wx::LaunchDefaultBrowser('http://www.prusa3d.com/drivers/');
});
$self->_append_menu_item($helpMenu, "Prusa Edition Releases", 'Open the Prusa Edition releases page in your browser', sub {
$self->_append_menu_item($helpMenu, L("Prusa Edition Releases"), L('Open the Prusa Edition releases page in your browser'), sub {
Wx::LaunchDefaultBrowser('http://github.com/prusa3d/slic3r/releases');
});
# my $versioncheck = $self->_append_menu_item($helpMenu, "Check for &Updates...", 'Check for new Slic3r versions', sub {
# wxTheApp->check_version(1);
# });
# $versioncheck->Enable(wxTheApp->have_version_check);
$self->_append_menu_item($helpMenu, "Slic3r &Website", 'Open the Slic3r website in your browser', sub {
$self->_append_menu_item($helpMenu, L("Slic3r &Website"), L('Open the Slic3r website in your browser'), sub {
Wx::LaunchDefaultBrowser('http://slic3r.org/');
});
$self->_append_menu_item($helpMenu, "Slic3r &Manual", 'Open the Slic3r manual in your browser', sub {
$self->_append_menu_item($helpMenu, L("Slic3r &Manual"), L('Open the Slic3r manual in your browser'), sub {
Wx::LaunchDefaultBrowser('http://manual.slic3r.org/');
});
$helpMenu->AppendSeparator();
$self->_append_menu_item($helpMenu, "System Info", 'Show system information', sub {
$self->_append_menu_item($helpMenu, L("System Info"), L('Show system information'), sub {
wxTheApp->system_info;
});
$self->_append_menu_item($helpMenu, "Report an Issue", 'Report an issue on the Slic3r Prusa Edition', sub {
$self->_append_menu_item($helpMenu, L("Report an Issue"), L('Report an issue on the Slic3r Prusa Edition'), sub {
Wx::LaunchDefaultBrowser('http://github.com/prusa3d/slic3r/issues/new');
});
$self->_append_menu_item($helpMenu, "&About Slic3r", 'Show about dialog', sub {
$self->_append_menu_item($helpMenu, L("&About Slic3r"), L('Show about dialog'), sub {
wxTheApp->about;
});
}
@ -411,16 +413,15 @@ sub _init_menubar {
# will not be handled correctly
{
my $menubar = Wx::MenuBar->new;
$menubar->Append($fileMenu, "&File");
$menubar->Append($self->{plater_menu}, "&Plater") if $self->{plater_menu};
$menubar->Append($self->{object_menu}, "&Object") if $self->{object_menu};
$menubar->Append($windowMenu, "&Window");
$menubar->Append($self->{viewMenu}, "&View") if $self->{viewMenu};
$menubar->Append($fileMenu, L("&File"));
$menubar->Append($self->{plater_menu}, L("&Plater")) if $self->{plater_menu};
$menubar->Append($self->{object_menu}, L("&Object")) if $self->{object_menu};
$menubar->Append($windowMenu, L("&Window"));
$menubar->Append($self->{viewMenu}, L("&View")) if $self->{viewMenu};
# Add an optional debug menu
# (Select application language from the list of installed languages)
# In production code, the add_debug_menu() call should do nothing.
Slic3r::GUI::add_debug_menu($menubar, $self->{lang_ch_event});
$menubar->Append($helpMenu, "&Help");
$menubar->Append($helpMenu, L("&Help"));
$self->SetMenuBar($menubar);
}
}
@ -451,7 +452,7 @@ sub quick_slice {
# select input file
my $input_file;
if (!$params{reslice}) {
my $dialog = Wx::FileDialog->new($self, 'Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):',
my $dialog = Wx::FileDialog->new($self, L('Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):'),
wxTheApp->{app_config}->get_last_dir, "",
&Slic3r::GUI::MODEL_WILDCARD, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
if ($dialog->ShowModal != wxID_OK) {
@ -463,13 +464,13 @@ sub quick_slice {
$qs_last_input_file = $input_file unless $params{export_svg};
} else {
if (!defined $qs_last_input_file) {
Wx::MessageDialog->new($self, "No previously sliced file.",
'Error', wxICON_ERROR | wxOK)->ShowModal();
Wx::MessageDialog->new($self, L("No previously sliced file."),
L('Error'), wxICON_ERROR | wxOK)->ShowModal();
return;
}
if (! -e $qs_last_input_file) {
Wx::MessageDialog->new($self, "Previously sliced file ($qs_last_input_file) not found.",
'File Not Found', wxICON_ERROR | wxOK)->ShowModal();
Wx::MessageDialog->new($self, L("Previously sliced file (").$qs_last_input_file.L(") not found."),
L('File Not Found'), wxICON_ERROR | wxOK)->ShowModal();
return;
}
$input_file = $qs_last_input_file;
@ -508,7 +509,7 @@ sub quick_slice {
# The following line may die if the output_filename_format template substitution fails.
$output_file = $sprint->output_filepath;
$output_file =~ s/\.[gG][cC][oO][dD][eE]$/.svg/ if $params{export_svg};
my $dlg = Wx::FileDialog->new($self, 'Save ' . ($params{export_svg} ? 'SVG' : 'G-code') . ' file as:',
my $dlg = Wx::FileDialog->new($self, L('Save ') . ($params{export_svg} ? L('SVG') : L('G-code')) . L(' file as:'),
wxTheApp->{app_config}->get_last_output_dir(dirname($output_file)),
basename($output_file), $params{export_svg} ? &Slic3r::GUI::FILE_WILDCARDS->{svg} : &Slic3r::GUI::FILE_WILDCARDS->{gcode}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
if ($dlg->ShowModal != wxID_OK) {
@ -522,7 +523,7 @@ sub quick_slice {
}
# show processbar dialog
$progress_dialog = Wx::ProgressDialog->new('Slicing…', "Processing $input_file_basename…",
$progress_dialog = Wx::ProgressDialog->new(L('Slicing…'), L("Processing $input_file_basename…"),
100, $self, 0);
$progress_dialog->Pulse;
@ -542,9 +543,9 @@ sub quick_slice {
$progress_dialog->Destroy;
undef $progress_dialog;
my $message = "$input_file_basename was successfully sliced.";
my $message = $input_file_basename.L(" was successfully sliced.");
wxTheApp->notify($message);
Wx::MessageDialog->new($self, $message, 'Slicing Done!',
Wx::MessageDialog->new($self, $message, L('Slicing Done!'),
wxOK | wxICON_INFORMATION)->ShowModal;
};
Slic3r::GUI::catch_error($self, sub { $progress_dialog->Destroy if $progress_dialog });
@ -560,7 +561,7 @@ sub repair_stl {
my $input_file;
{
my $dialog = Wx::FileDialog->new($self, 'Select the STL file to repair:',
my $dialog = Wx::FileDialog->new($self, L('Select the STL file to repair:'),
wxTheApp->{app_config}->get_last_dir, "",
&Slic3r::GUI::FILE_WILDCARDS->{stl}, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
if ($dialog->ShowModal != wxID_OK) {
@ -574,7 +575,7 @@ sub repair_stl {
my $output_file = $input_file;
{
$output_file =~ s/\.[sS][tT][lL]$/_fixed.obj/;
my $dlg = Wx::FileDialog->new($self, "Save OBJ file (less prone to coordinate errors than STL) as:", dirname($output_file),
my $dlg = Wx::FileDialog->new($self, L("Save OBJ file (less prone to coordinate errors than STL) as:"), dirname($output_file),
basename($output_file), &Slic3r::GUI::FILE_WILDCARDS->{obj}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
if ($dlg->ShowModal != wxID_OK) {
$dlg->Destroy;
@ -588,7 +589,7 @@ sub repair_stl {
$tmesh->ReadSTLFile($input_file);
$tmesh->repair;
$tmesh->WriteOBJFile($output_file);
Slic3r::GUI::show_info($self, "Your file was repaired.", "Repair");
Slic3r::GUI::show_info($self, L("Your file was repaired."), L("Repair"));
}
sub export_config {
@ -599,7 +600,7 @@ sub export_config {
eval { $config->validate; };
Slic3r::GUI::catch_error($self) and return;
# Ask user for the file name for the config file.
my $dlg = Wx::FileDialog->new($self, 'Save configuration as:',
my $dlg = Wx::FileDialog->new($self, L('Save configuration as:'),
$last_config ? dirname($last_config) : wxTheApp->{app_config}->get_last_dir,
$last_config ? basename($last_config) : "config.ini",
&Slic3r::GUI::FILE_WILDCARDS->{ini}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
@ -617,7 +618,7 @@ sub load_config_file {
my ($self, $file) = @_;
if (!$file) {
return unless $self->check_unsaved_changes;
my $dlg = Wx::FileDialog->new($self, 'Select configuration to load:',
my $dlg = Wx::FileDialog->new($self, L('Select configuration to load:'),
$last_config ? dirname($last_config) : wxTheApp->{app_config}->get_last_dir,
"config.ini",
'INI files (*.ini, *.gcode)|*.ini;*.INI;*.gcode;*.g', wxFD_OPEN | wxFD_FILE_MUST_EXIST);
@ -640,7 +641,7 @@ sub export_configbundle {
eval { wxTheApp->{preset_bundle}->full_config->validate; };
Slic3r::GUI::catch_error($self) and return;
# Ask user for a file name.
my $dlg = Wx::FileDialog->new($self, 'Save presets bundle as:',
my $dlg = Wx::FileDialog->new($self, L('Save presets bundle as:'),
$last_config ? dirname($last_config) : wxTheApp->{app_config}->get_last_dir,
"Slic3r_config_bundle.ini",
&Slic3r::GUI::FILE_WILDCARDS->{ini}, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
@ -661,7 +662,7 @@ sub load_configbundle {
my ($self, $file, $reset_user_profile) = @_;
return unless $self->check_unsaved_changes;
if (!$file) {
my $dlg = Wx::FileDialog->new($self, 'Select configuration to load:',
my $dlg = Wx::FileDialog->new($self, L('Select configuration to load:'),
$last_config ? dirname($last_config) : wxTheApp->{app_config}->get_last_dir,
"config.ini",
&Slic3r::GUI::FILE_WILDCARDS->{ini}, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
@ -681,7 +682,7 @@ sub load_configbundle {
$tab->load_current_preset;
}
my $message = sprintf "%d presets successfully imported.", $presets_imported;
my $message = sprintf L("%d presets successfully imported."), $presets_imported;
Slic3r::GUI::show_info($self, $message);
}
@ -743,8 +744,8 @@ sub check_unsaved_changes {
if (@dirty) {
my $titles = join ', ', @dirty;
my $confirm = Wx::MessageDialog->new($self, "You have unsaved changes ($titles). Discard changes and continue anyway?",
'Unsaved Presets', wxICON_QUESTION | wxYES_NO | wxNO_DEFAULT);
my $confirm = Wx::MessageDialog->new($self, L("You have unsaved changes ").($titles).L(". Discard changes and continue anyway?"),
L('Unsaved Presets'), wxICON_QUESTION | wxYES_NO | wxNO_DEFAULT);
return $confirm->ShowModal == wxID_YES;
}