diff --git a/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini b/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini new file mode 100644 index 000000000..ae21f862d --- /dev/null +++ b/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini @@ -0,0 +1,3629 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-10 at 09:05:01 + +[print:0.05mm DETAIL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 10 +bridge_acceleration = 300 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode" +complete_objects = 0 +default_acceleration = 500 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 25% +fill_pattern = cubic +first_layer_acceleration = 500 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 800 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 30 +interface_shells = 0 +layer_height = 0.05 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 300 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 30 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 30 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.3 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1.5 +support_material_speed = 30 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 20 +top_solid_layers = 15 +travel_speed = 180 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.05mm DETAIL 0.25 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 10 +bridge_acceleration = 300 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.25 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.25 nozzle" +complete_objects = 0 +default_acceleration = 500 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.28 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 500 +first_layer_extrusion_width = 0.3 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 800 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 20 +interface_shells = 0 +layer_height = 0.05 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 300 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 20 +perimeters = 4 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 10 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.18 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 20 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 20 +top_solid_layers = 15 +travel_speed = 200 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.05mm DETAIL MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 10 +bridge_acceleration = 300 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK3" +complete_objects = 0 +default_acceleration = 500 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 25% +fill_pattern = cubic +first_layer_acceleration = 500 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 800 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.5 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 30 +interface_shells = 0 +layer_height = 0.05 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 300 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 30 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 30 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.3 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1.5 +support_material_speed = 30 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 20 +top_solid_layers = 15 +travel_speed = 180 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.10mm DETAIL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 40 +top_solid_layers = 9 +travel_speed = 120 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.10mm DETAIL 0.25 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.25 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.25 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 15% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1600 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 40 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 25 +perimeters = 4 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 10 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.18 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 30 +top_solid_layers = 9 +travel_speed = 120 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.10mm DETAIL MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK3" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 3500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 35% +infill_speed = 200 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 250 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 200 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 250 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm 100mms Linear Advance] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 50 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 150 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 30 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 70 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 40 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL 0.25 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.25 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.25 nozzle";"Original Prusa i3 MK2 MultiMaterial 0.25 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1600 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 40 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 25 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 10 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.2 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 35 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 30 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL 0.6 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 40 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK3" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 3500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 35% +infill_speed = 200 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 250 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 200 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 250 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL SOLUBLE FULL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 1 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.15mm OPTIMAL SOLUBLE INTERFACE] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 25 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 3 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm 100mms Linear Advance] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 50 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 150 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 30 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 70 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm NORMAL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 50 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm NORMAL 0.6 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 40 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm NORMAL MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK3" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 3500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 35% +infill_speed = 200 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 250 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 200 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 250 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm NORMAL SOLUBLE FULL] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 1 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 30 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.20mm NORMAL SOLUBLE INTERFACE] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 3 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 30 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.35mm FAST] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MultiMaterial" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.7 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.43 +perimeter_speed = 50 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.7 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.43 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.35mm FAST 0.6 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 50 +top_solid_layers = 9 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.35mm FAST MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK3" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 3500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.7 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 35% +infill_speed = 200 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 250 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.7 +solid_infill_speed = 200 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 250 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.35mm FAST sol full 0.6 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial 0.6 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.55 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 3 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.57 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.35mm FAST sol int 0.6 nozzle] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = "Original Prusa i3 MK2 MultiMaterial 0.6 nozzle" +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.55 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.57 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[filament:ColorFabb Brass Bronze 1.75mm] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3" +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.3 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 210 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 210 + +[filament:ColorFabb HT 1.75mm] +bed_temperature = 105 +bridge_fan_speed = 30 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 105 +first_layer_temperature = 270 +max_fan_speed = 20 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 270 + +[filament:ColorFabb PLA-PHA] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 210 + +[filament:ColorFabb Woodfil 1.75mm] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3" +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 200 + +[filament:ColorFabb XT 1.75mm] +bed_temperature = 65 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:ColorFabb XT-CF20 1.75mm] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 1 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 260 + +[filament:ColorFabb nGen 1.75mm] +bed_temperature = 85 +bridge_fan_speed = 40 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = NGEN +first_layer_bed_temperature = 85 +first_layer_temperature = 240 +max_fan_speed = 35 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:ColorFabb nGen flex] +bed_temperature = 85 +bridge_fan_speed = 40 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 5 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = FLEX +first_layer_bed_temperature = 85 +first_layer_temperature = 260 +max_fan_speed = 35 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 260 + +[filament:E3D Edge] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:E3D PC-ABS 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 270 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 270 + +[filament:Fillamentum ABS 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 240 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 240 + +[filament:Fillamentum ASA 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 265 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 265 + +[filament:Fillamentum CPE HG100 HM100] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "CPE HG100 , CPE HM100" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +max_fan_speed = 80 +min_fan_speed = 80 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 260 + +[filament:Fillamentum Timberfil] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3" +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 190 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 190 + +[filament:Generic ABS 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 255 + +[filament:Generic PET 1.75mm] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:Generic PLA 1.75mm] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 210 + +[filament:Polymaker PC-Max] +bed_temperature = 120 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 120 +first_layer_temperature = 270 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 270 + +[filament:Primavalue PVA] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 1 +filament_type = PVA +first_layer_bed_temperature = 60 +first_layer_temperature = 195 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 195 + +[filament:Prusa ABS 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 255 + +[filament:Prusa HIPS 1.75mm] +bed_temperature = 100 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 0.9 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 1 +filament_type = HIPS +first_layer_bed_temperature = 100 +first_layer_temperature = 220 +max_fan_speed = 20 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 220 + +[filament:Prusa PET 1.75mm] +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:Prusa PLA 1.75mm] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 210 + +[filament:SemiFlex or Flexfill 98A] +bed_temperature = 50 +bridge_fan_speed = 100 +compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK3" +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #00CA0A +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 2.5 +filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" +filament_settings_id = +filament_soluble = 0 +filament_type = FLEX +first_layer_bed_temperature = 50 +first_layer_temperature = 220 +max_fan_speed = 90 +min_fan_speed = 70 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 230 + +[filament:Taulman Bridge 1.75mm] +bed_temperature = 50 +bridge_fan_speed = 40 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #DEE0E6 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 250 + +[filament:Taulman T-Glase 1.75mm] +bed_temperature = 90 +bridge_fan_speed = 40 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}30{endif}; Filament gcode" +temperature = 240 + +[filament:Verbatim BVOH] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 1 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 210 + +[filament:Verbatim PP] +bed_temperature = 100 +bridge_fan_speed = 100 +compatible_printers = +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #DEE0E6 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 5 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_preset==\"Original Prusa i3 MK2 MultiMaterial\"}200{elsif printer_preset==\"Original Prusa i3 MK2 MM Single Mode\"}200{else}10{endif}; Filament gcode" +temperature = 220 + +[printer:Original Prusa i3 MK2] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 3 +retract_lift = 0.5 +retract_lift_above = 1 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 0.25 nozzle] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.1 +min_layer_height = 0.05 +nozzle_diameter = 0.25 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 3 +retract_lift = 0.5 +retract_lift_above = 1 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 50 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 0 +wipe = 1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 0.6 nozzle] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.35 +min_layer_height = 0.1 +nozzle_diameter = 0.6 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 3 +retract_lift = 0.5 +retract_lift_above = 1 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 MM Single Mode] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 50 +end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n +extruder_colour = #FFAA55 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 4 +retract_length_toolchange = 6 +retract_lift = 0.5 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 80 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 1 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 50 +end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n +extruder_colour = #FFAA55 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +nozzle_diameter = 0.6 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 3 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 4 +retract_length_toolchange = 6 +retract_lift = 0.5 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 80 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 1 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 MultiMaterial] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 50,50,50,50 +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors +extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 +extruder_offset = 0x0,0x0,0x0,0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25,0.25,0.25,0.25 +min_layer_height = 0.07,0.07,0.07,0.07 +nozzle_diameter = 0.4,0.4,0.4,0.4 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 3,3,3,3 +retract_before_wipe = 60%,60%,60%,60% +retract_layer_change = 0,0,0,0 +retract_length = 4,4,4,4 +retract_length_toolchange = 4,4,4,4 +retract_lift = 0.5,0.5,0.5,0.5 +retract_lift_above = 0,0,0,0 +retract_lift_below = 199,199,199,199 +retract_restart_extra = 0,0,0,0 +retract_restart_extra_toolchange = 0,0,0,0 +retract_speed = 80,80,80,80 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 1 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 0 +wipe = 1,1,1,1 +z_offset = 0 + +[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 50,50,50,50 +end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n +extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 +extruder_offset = 0x0,0x0,0x0,0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25,0.25,0.25,0.25 +min_layer_height = 0.07,0.07,0.07,0.07 +nozzle_diameter = 0.6,0.6,0.6,0.6 +octoprint_apikey = +octoprint_host = +printer_notes = +printer_settings_id = +retract_before_travel = 3,3,3,3 +retract_before_wipe = 60%,60%,60%,60% +retract_layer_change = 0,0,0,0 +retract_length = 4,4,4,4 +retract_length_toolchange = 4,4,4,4 +retract_lift = 0.5,0.5,0.5,0.5 +retract_lift_above = 0,0,0,0 +retract_lift_below = 199,199,199,199 +retract_restart_extra = 0,0,0,0 +retract_restart_extra_toolchange = 0,0,0,0 +retract_speed = 80,80,80,80 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 1 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 0 +wipe = 1,1,1,1 +z_offset = 0 + +[printer:Original Prusa i3 MK3] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +printer_notes = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 3 +retract_lift = 0.5 +retract_lift_above = 1 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[presets] +print = 0.15mm 100mms Linear Advance +printer = Original Prusa i3 MK2 +filament = Prusa PLA 1.75mm