3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enabled the C++ fillers for all infills, not just the supports.

Browse Source 
Made sure the C++ fillers are instantiated at the worker threads,
where there are being released.
Extended the FillRectilinear2 to calculate the contour / line intersection
with exact arithmetics, improved robustness and added error handling
and error reporting, if the contours to be filled are not correct.
This commit is contained in:
bubnikv 2016-10-20 17:44:46 +02:00
parent f788f50b5a
commit 9e4edcd8ec
11 changed files with 314 additions and 172 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
lib/Slic3r.pm
View File

@ -223,7 +223,9 @@ sub thread_cleanup {
*Slic3r::ExtrusionPath::Collection::DESTROY = sub {}; *Slic3r::ExtrusionPath::Collection::DESTROY = sub {};
*Slic3r::ExtrusionSimulator::DESTROY = sub {}; *Slic3r::ExtrusionSimulator::DESTROY = sub {};
*Slic3r::Flow::DESTROY = sub {}; *Slic3r::Flow::DESTROY = sub {};
*Slic3r::Filler::DESTROY = sub {}; # Fillers are only being allocated in worker threads, which are not going to be forked.
# Therefore the Filler instances shall be released at the end of the thread.
# *Slic3r::Filler::DESTROY = sub {};
*Slic3r::GCode::DESTROY = sub {}; *Slic3r::GCode::DESTROY = sub {};
*Slic3r::GCode::AvoidCrossingPerimeters::DESTROY = sub {}; *Slic3r::GCode::AvoidCrossingPerimeters::DESTROY = sub {};
*Slic3r::GCode::OozePrevention::DESTROY = sub {}; *Slic3r::GCode::OozePrevention::DESTROY = sub {};

4
lib/Slic3r/Layer.pm
View File

@ -36,7 +36,9 @@ sub make_fill {
foreach my $layerm (@{$self->regions}) { foreach my $layerm (@{$self->regions}) {
$layerm->fills->clear; $layerm->fills->clear;
$layerm->fills->append($_) for $self->object->fill_maker->make_fill($layerm); # Fearlessly enable the C++ fillers.
$layerm->fills->append($_) for $self->object->fill_maker2->make_fill($layerm);
# $layerm->fills->append($_) for $self->object->fill_maker->make_fill($layerm);
} }
} }

12
lib/Slic3r/Print/SupportMaterial.pm
View File

@ -647,11 +647,6 @@ sub generate_toolpaths {
$pattern = 'honeycomb'; $pattern = 'honeycomb';
} }
my %fillers = (
interface => $object->fill_maker2->filler('rectilinear'),
support => $object->fill_maker2->filler($pattern),
);
my $interface_angle = $self->object_config->support_material_angle + 90; my $interface_angle = $self->object_config->support_material_angle + 90;
my $interface_spacing = $self->object_config->support_material_interface_spacing + $interface_flow->spacing; my $interface_spacing = $self->object_config->support_material_interface_spacing + $interface_flow->spacing;
my $interface_density = $interface_spacing == 0 ? 1 : $interface_flow->spacing / $interface_spacing; my $interface_density = $interface_spacing == 0 ? 1 : $interface_flow->spacing / $interface_spacing;
@ -763,6 +758,13 @@ sub generate_toolpaths {
$layer->support_interface_fills->append(@loops); $layer->support_interface_fills->append(@loops);
} }
# Allocate the fillers exclusively in the worker threads! Don't allocate them at the main thread,
# as Perl copies the C++ pointers by default, so then the C++ objects are shared between threads!
my %fillers = (
interface => $object->fill_maker2->filler('rectilinear'),
support => $object->fill_maker2->filler($pattern),
);
# interface and contact infill # interface and contact infill
if (@$interface || @$contact_infill) { if (@$interface || @$contact_infill) {
$fillers{interface}->set_angle($interface_angle); $fillers{interface}->set_angle($interface_angle);

395
xs/src/libslic3r/Fill/FillRectilinear2.cpp
View File

@ -1,4 +1,3 @@
#include <assert.h>
#include <stdlib.h> #include <stdlib.h>
#include <stdint.h> #include <stdint.h>
@ -16,6 +15,12 @@
// #define SLIC3R_DEBUG // #define SLIC3R_DEBUG
// Make assert active if SLIC3R_DEBUG
#ifdef SLIC3R_DEBUG
#undef NDEBUG
#endif
#include <assert.h>
#ifdef SLIC3R_DEBUG #ifdef SLIC3R_DEBUG
#include "SVG.hpp" #include "SVG.hpp"
#endif #endif
@ -190,7 +195,8 @@ public:
SegmentIntersection() : SegmentIntersection() :
iContour(0), iContour(0),
iSegment(0), iSegment(0),
pos(0), pos_p(0),
pos_q(1),
type(UNKNOWN), type(UNKNOWN),
consumed_vertical_up(false), consumed_vertical_up(false),
consumed_perimeter_right(false) consumed_perimeter_right(false)
@ -200,8 +206,20 @@ public:
size_t iContour; size_t iContour;
// Index of a segment in iContour, with which this vertical line intersects. // Index of a segment in iContour, with which this vertical line intersects.
size_t iSegment; size_t iSegment;
// y position of the intersection. // y position of the intersection, ratinal number.
coord_t pos; int64_t pos_p;
uint32_t pos_q;
coord_t pos() const {
// Division rounds both positive and negative down to zero.
// Add half of q for an arithmetic rounding effect.
int64_t p = pos_p;
if (p < 0)
p -= int64_t(pos_q>>1);
else
p += int64_t(pos_q>>1);
return coord_t(p / int64_t(pos_q));
}
// Kind of intersection. With the original contour, or with the inner offestted contour? // Kind of intersection. With the original contour, or with the inner offestted contour?
// A vertical segment will be at least intersected by OUTER_LOW, OUTER_HIGH, // A vertical segment will be at least intersected by OUTER_LOW, OUTER_HIGH,
@ -232,8 +250,89 @@ public:
bool is_low () const { return type == INNER_LOW || type == OUTER_LOW; } bool is_low () const { return type == INNER_LOW || type == OUTER_LOW; }
bool is_high () const { return type == INNER_HIGH || type == OUTER_HIGH; } bool is_high () const { return type == INNER_HIGH || type == OUTER_HIGH; }
// Compare two y intersection points given by rational numbers.
// Note that the rational number is given as pos_p/pos_q, where pos_p is int64 and pos_q is uint32.
// This function calculates pos_p * other.pos_q < other.pos_p * pos_q as a 48bit number.
// We don't use 128bit intrinsic data types as these are usually not supported by 32bit compilers and
// we don't need the full 128bit precision anyway.
bool operator<(const SegmentIntersection &other) const bool operator<(const SegmentIntersection &other) const
{ return pos < other.pos; } {
assert(pos_q > 0);
assert(other.pos_q > 0);
if (pos_p == 0 || other.pos_p == 0) {
// Because the denominators are positive and one of the nominators is zero,
// following simple statement holds.
return pos_p < other.pos_p;
} else {
// None of the nominators is zero.
char sign1 = (pos_p > 0) ? 1 : -1;
char sign2 = (other.pos_p > 0) ? 1 : -1;
char signs = sign1 * sign2;
assert(signs == 1 || signs == -1);
if (signs < 0) {
// The nominators have different signs.
return sign1 < 0;
} else {
// The nominators have the same sign.
// Absolute values
uint64_t p1, p2;
if (sign1 > 0) {
p1 = uint64_t(pos_p);
p2 = uint64_t(other.pos_p);
} else {
p1 = uint64_t(- pos_p);
p2 = uint64_t(- other.pos_p);
};
// Multiply low and high 32bit words of p1 by other_pos.q
// 32bit x 32bit => 64bit
// l_hi and l_lo overlap by 32 bits.
uint64_t l_hi = (p1 >> 32) * uint64_t(other.pos_q);
uint64_t l_lo = (p1 & 0xffffffffll) * uint64_t(other.pos_q);
l_hi += (l_lo >> 32);
uint64_t r_hi = (p2 >> 32) * uint64_t(pos_q);
uint64_t r_lo = (p2 & 0xffffffffll) * uint64_t(pos_q);
r_hi += (r_lo >> 32);
// Compare the high 64 bits.
if (l_hi == r_hi) {
// Compare the low 32 bits.
l_lo &= 0xffffffffll;
r_lo &= 0xffffffffll;
return (sign1 < 0) ? (l_lo > r_lo) : (l_lo < r_lo);
}
return (sign1 < 0) ? (l_hi > r_hi) : (l_hi < r_hi);
}
}
}
bool operator==(const SegmentIntersection &other) const
{
assert(pos_q > 0);
assert(other.pos_q > 0);
if (pos_p == 0 || other.pos_p == 0) {
// Because the denominators are positive and one of the nominators is zero,
// following simple statement holds.
return pos_p == other.pos_p;
}
// None of the nominators is zero, none of the denominators is zero.
bool positive = pos_p > 0;
if (positive != (other.pos_p > 0))
return false;
// The nominators have the same sign.
// Absolute values
uint64_t p1 = positive ? uint64_t(pos_p) : uint64_t(- pos_p);
uint64_t p2 = positive ? uint64_t(other.pos_p) : uint64_t(- other.pos_p);
// Multiply low and high 32bit words of p1 by other_pos.q
// 32bit x 32bit => 64bit
// l_hi and l_lo overlap by 32 bits.
uint64_t l_lo = (p1 & 0xffffffffll) * uint64_t(other.pos_q);
uint64_t r_lo = (p2 & 0xffffffffll) * uint64_t(pos_q);
if (l_lo != r_lo)
return false;
uint64_t l_hi = (p1 >> 32) * uint64_t(other.pos_q);
uint64_t r_hi = (p2 >> 32) * uint64_t(pos_q);
return l_hi + (l_lo >> 32) == r_hi + (r_lo >> 32);
}
}; };
// A vertical line with intersection points with polygons. // A vertical line with intersection points with polygons.
@ -260,8 +359,9 @@ public:
coord_t aoffset2) coord_t aoffset2)
{ {
// Copy and rotate the source polygons. // Copy and rotate the source polygons.
polygons_src = (Polygons)expolygon; polygons_src = expolygon;
for (Polygons::iterator it = polygons_src.begin(); it != polygons_src.end(); ++ it) polygons_src.contour.rotate(angle);
for (Polygons::iterator it = polygons_src.holes.begin(); it != polygons_src.holes.end(); ++ it)
it->rotate(angle); it->rotate(angle);
double mitterLimit = 3.; double mitterLimit = 3.;
@ -271,15 +371,23 @@ public:
myassert(aoffset1 < 0); myassert(aoffset1 < 0);
myassert(aoffset2 < 0); myassert(aoffset2 < 0);
myassert(aoffset2 < aoffset1); myassert(aoffset2 < aoffset1);
bool sticks_removed = remove_sticks(polygons_src);
// if (sticks_removed) printf("Sticks removed!\n");
polygons_outer = offset(polygons_src, aoffset1, polygons_outer = offset(polygons_src, aoffset1,
CLIPPER_OFFSET_SCALE, CLIPPER_OFFSET_SCALE,
ClipperLib::jtMiter, ClipperLib::jtMiter,
mitterLimit); mitterLimit);
polygons_inner = offset(polygons_src, aoffset2, polygons_inner = offset(polygons_outer, aoffset2 - aoffset1,
CLIPPER_OFFSET_SCALE, CLIPPER_OFFSET_SCALE,
ClipperLib::jtMiter, ClipperLib::jtMiter,
mitterLimit); mitterLimit);
n_contours_outer = polygons_outer.size(); // Filter out contours with zero area or small area, contours with 2 points only.
const double min_area_threshold = 0.01 * aoffset2 * aoffset2;
remove_small(polygons_outer, min_area_threshold);
remove_small(polygons_inner, min_area_threshold);
remove_sticks(polygons_outer);
remove_sticks(polygons_inner);
n_contours_outer = polygons_outer.size();
n_contours_inner = polygons_inner.size(); n_contours_inner = polygons_inner.size();
n_contours = n_contours_outer + n_contours_inner; n_contours = n_contours_outer + n_contours_inner;
polygons_ccw.assign(n_contours, false); polygons_ccw.assign(n_contours, false);
@ -304,13 +412,21 @@ public:
bool is_contour_ccw(size_t idx) const { return polygons_ccw[idx]; } bool is_contour_ccw(size_t idx) const { return polygons_ccw[idx]; }
BoundingBox bounding_box_src() const BoundingBox bounding_box_src() const
{ return _bounding_box_polygons(polygons_src); } { return get_extents(polygons_src); }
BoundingBox bounding_box_outer() const BoundingBox bounding_box_outer() const
{ return _bounding_box_polygons(polygons_outer); } { return get_extents(polygons_outer); }
BoundingBox bounding_box_inner() const BoundingBox bounding_box_inner() const
{ return _bounding_box_polygons(polygons_inner); } { return get_extents(polygons_inner); }
Polygons polygons_src; #ifdef SLIC3R_DEBUG
void export_to_svg(Slic3r::SVG &svg) {
svg.draw_outline(polygons_src, "black");
svg.draw_outline(polygons_outer, "green");
svg.draw_outline(polygons_inner, "brown");
}
#endif /* SLIC3R_DEBUG */
ExPolygon polygons_src;
Polygons polygons_outer; Polygons polygons_outer;
Polygons polygons_inner; Polygons polygons_inner;
@ -321,16 +437,6 @@ public:
protected: protected:
// For each polygon of polygons_inner, remember its orientation. // For each polygon of polygons_inner, remember its orientation.
std::vector<unsigned char> polygons_ccw; std::vector<unsigned char> polygons_ccw;
static BoundingBox _bounding_box_polygons(const Polygons &poly) {
BoundingBox bbox;
if (! poly.empty()) {
bbox = poly.front().bounding_box();
for (size_t i = 1; i < poly.size(); ++ i)
bbox.merge(poly[i]);
}
return bbox;
}
}; };
static inline int distance_of_segmens(const Polygon &poly, size_t seg1, size_t seg2, bool forward) static inline int distance_of_segmens(const Polygon &poly, size_t seg1, size_t seg2, bool forward)
@ -536,8 +642,8 @@ static inline coordf_t measure_perimeter_prev_next_segment_length(
myassert(itsct.is_inner()); myassert(itsct.is_inner());
const bool forward = itsct.is_low() == dir_is_next; const bool forward = itsct.is_low() == dir_is_next;
Point p1(il.pos, itsct.pos); Point p1(il.pos, itsct.pos());
Point p2(il2.pos, itsct2.pos); Point p2(il2.pos, itsct2.pos());
return forward ? return forward ?
segment_length(poly, itsct .iSegment, p1, itsct2.iSegment, p2) : segment_length(poly, itsct .iSegment, p1, itsct2.iSegment, p2) :
segment_length(poly, itsct2.iSegment, p2, itsct .iSegment, p1); segment_length(poly, itsct2.iSegment, p2, itsct .iSegment, p1);
@ -604,7 +710,7 @@ static inline void emit_perimeter_prev_next_segment(
else else
polygon_segment_append_reversed(out.points, poly, itsct.iSegment, itsct2.iSegment); polygon_segment_append_reversed(out.points, poly, itsct.iSegment, itsct2.iSegment);
// Append the last point. // Append the last point.
out.points.push_back(Point(il2.pos, itsct2.pos)); out.points.push_back(Point(il2.pos, itsct2.pos()));
} }
// Append the points of a perimeter segment when going from iIntersection to iIntersection2. // Append the points of a perimeter segment when going from iIntersection to iIntersection2.
@ -636,7 +742,7 @@ static inline void emit_perimeter_segment_on_vertical_line(
else else
polygon_segment_append_reversed(out.points, poly, itsct.iSegment, itsct2.iSegment); polygon_segment_append_reversed(out.points, poly, itsct.iSegment, itsct2.iSegment);
// Append the last point. // Append the last point.
out.points.push_back(Point(il.pos, itsct2.pos)); out.points.push_back(Point(il.pos, itsct2.pos()));
} }
enum DirectionMask enum DirectionMask
@ -645,7 +751,7 @@ enum DirectionMask
DIR_BACKWARD = 2 DIR_BACKWARD = 2
}; };
void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillParams &params, float angleBase, Polylines &polylines_out) bool FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillParams &params, float angleBase, Polylines &polylines_out)
{ {
// At the end, only the new polylines will be rotated back. // At the end, only the new polylines will be rotated back.
size_t n_polylines_out_initial = polylines_out.size(); size_t n_polylines_out_initial = polylines_out.size();
@ -672,7 +778,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
scale_(- 0.5 * this->spacing)); scale_(- 0.5 * this->spacing));
if (poly_with_offset.n_contours_inner == 0) { if (poly_with_offset.n_contours_inner == 0) {
//FIXME maybe one shall trigger the gap fill here? //FIXME maybe one shall trigger the gap fill here?
return; return true;
} }
BoundingBox bounding_box = poly_with_offset.bounding_box_outer(); BoundingBox bounding_box = poly_with_offset.bounding_box_outer();
@ -696,27 +802,13 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
coord_t x0 = bounding_box.min.x + this->_line_spacing; coord_t x0 = bounding_box.min.x + this->_line_spacing;
#ifdef SLIC3R_DEBUG #ifdef SLIC3R_DEBUG
char path[2048];
static int iRun = 0; static int iRun = 0;
sprintf(path, "out/FillRectilinear2-%d.svg", iRun);
BoundingBox bbox_svg = poly_with_offset.bounding_box_outer(); BoundingBox bbox_svg = poly_with_offset.bounding_box_outer();
::Slic3r::SVG svg(path, bbox_svg); // , scale_(1.)); ::Slic3r::SVG svg(debug_out_path("FillRectilinear2-%d.svg", iRun), bbox_svg); // , scale_(1.));
for (size_t i = 0; i < poly_with_offset.polygons_src.size(); ++ i) poly_with_offset.export_to_svg(svg);
svg.draw(poly_with_offset.polygons_src[i].lines());
for (size_t i = 0; i < poly_with_offset.polygons_outer.size(); ++ i)
svg.draw(poly_with_offset.polygons_outer[i].lines(), "green");
for (size_t i = 0; i < poly_with_offset.polygons_inner.size(); ++ i)
svg.draw(poly_with_offset.polygons_inner[i].lines(), "brown");
{ {
char path2[2048]; ::Slic3r::SVG svg(debug_out_path("FillRectilinear2-initial-%d.svg", iRun), bbox_svg); // , scale_(1.));
sprintf(path2, "out/FillRectilinear2-initial-%d.svg", iRun); poly_with_offset.export_to_svg(svg);
::Slic3r::SVG svg(path2, bbox_svg); // , scale_(1.));
for (size_t i = 0; i < poly_with_offset.polygons_src.size(); ++ i)
svg.draw(poly_with_offset.polygons_src[i].lines());
for (size_t i = 0; i < poly_with_offset.polygons_outer.size(); ++ i)
svg.draw(poly_with_offset.polygons_outer[i].lines(), "green");
for (size_t i = 0; i < poly_with_offset.polygons_inner.size(); ++ i)
svg.draw(poly_with_offset.polygons_inner[i].lines(), "brown");
} }
iRun ++; iRun ++;
#endif /* SLIC3R_DEBUG */ #endif /* SLIC3R_DEBUG */
@ -756,39 +848,42 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
continue; continue;
myassert(il >= 0 && il < segs.size()); myassert(il >= 0 && il < segs.size());
myassert(ir >= 0 && ir < segs.size()); myassert(ir >= 0 && ir < segs.size());
if (l == r) {
// The segment is vertical.
// Don't insert vertical segments at all.
// If the contour is not degenerate, then this vertical line will be crossed
// by the non-vertical segments preceding resp. succeeding this vertical segment.
/*
SegmentIntersection is;
is.iContour = iContour;
is.iSegment = iSegment;
is.pos = p1.y;
segs[il].intersections.push_back(is);
is.pos = p2.y;
segs[il].intersections.push_back(is);
*/
continue;
}
for (int i = il; i <= ir; ++ i) { for (int i = il; i <= ir; ++ i) {
coord_t this_x = segs[i].pos;
assert(this_x == i * this->_line_spacing + x0);
SegmentIntersection is; SegmentIntersection is;
is.iContour = iContour; is.iContour = iContour;
is.iSegment = iSegment; is.iSegment = iSegment;
myassert(l <= segs[i].pos); myassert(l <= this_x);
myassert(r >= segs[i].pos); myassert(r >= this_x);
// Calculate the intersection position in y axis. x is known. // Calculate the intersection position in y axis. x is known.
double t = double(segs[i].pos - p1.x) / double(p2.x - p1.x); if (p1.x == this_x) {
myassert(t > -0.000001 && t < 1.000001); if (p2.x == this_x) {
t = clamp(0., 1., t); // Ignore strictly vertical segments.
coord_t lo = p1.y; continue;
coord_t hi = p2.y; }
if (lo > hi) is.pos_p = p1.y;
std::swap(lo, hi); is.pos_q = 1;
is.pos = p1.y + coord_t(t * double(p2.y - p1.y)); } else if (p2.x == this_x) {
myassert(is.pos > lo - 0.000001 && is.pos < hi + 0.000001); is.pos_p = p2.y;
is.pos = clamp(lo, hi, is.pos); is.pos_q = 1;
} else {
// First calculate the intersection parameter 't' as a rational number with non negative denominator.
if (p2.x > p1.x) {
is.pos_p = this_x - p1.x;
is.pos_q = p2.x - p1.x;
} else {
is.pos_p = p1.x - this_x;
is.pos_q = p1.x - p2.x;
}
myassert(is.pos_p >= 0 && is.pos_p <= is.pos_q);
// Make an intersection point from the 't'.
is.pos_p *= int64_t(p2.y - p1.y);
is.pos_p += p1.y * int64_t(is.pos_q);
}
// +-1 to take rounding into account.
myassert(is.pos() + 1 >= std::min(p1.y, p2.y));
myassert(is.pos() <= std::max(p1.y, p2.y) + 1);
segs[i].intersections.push_back(is); segs[i].intersections.push_back(is);
} }
} }
@ -797,9 +892,10 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
// Sort the intersections along their segments, specify the intersection types. // Sort the intersections along their segments, specify the intersection types.
for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) { for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) {
SegmentedIntersectionLine &sil = segs[i_seg]; SegmentedIntersectionLine &sil = segs[i_seg];
// Sort the intersection points. This needs to be verified, because the intersection points were calculated // Sort the intersection points using exact rational arithmetic.
// using imprecise arithmetics.
std::sort(sil.intersections.begin(), sil.intersections.end()); std::sort(sil.intersections.begin(), sil.intersections.end());
#if 0
// Verify the order, bubble sort the intersections until sorted. // Verify the order, bubble sort the intersections until sorted.
bool modified = false; bool modified = false;
do { do {
@ -888,12 +984,20 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
if (swap) { if (swap) {
// Swap the intersection points, but keep the original positions, so they stay sorted by the y axis. // Swap the intersection points, but keep the original positions, so they stay sorted by the y axis.
std::swap(sil.intersections[i-1], sil.intersections[i]); std::swap(sil.intersections[i-1], sil.intersections[i]);
std::swap(sil.intersections[i-1].pos, sil.intersections[i].pos); std::swap(sil.intersections[i-1].pos_p, sil.intersections[i].pos_p);
std::swap(sil.intersections[i-1].pos_q, sil.intersections[i].pos_q);
modified = true; modified = true;
} }
} }
} while (modified); } while (modified);
// Assign the intersection types. #endif
// Assign the intersection types, remove duplicate or overlapping intersection points.
// When a loop vertex touches a vertical line, intersection point is generated for both segments.
// If such two segments are oriented equally, then one of them is removed.
// Otherwise the vertex is tangential to the vertical line and both segments are removed.
// The same rule applies, if the loop is pinched into a single point and this point touches the vertical line:
// The loop has a zero vertical size at the vertical line, therefore the intersection point is removed.
size_t j = 0; size_t j = 0;
for (size_t i = 0; i < sil.intersections.size(); ++ i) { for (size_t i = 0; i < sil.intersections.size(); ++ i) {
// What is the orientation of the segment at the intersection point? // What is the orientation of the segment at the intersection point?
@ -909,75 +1013,75 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
(low ? SegmentIntersection::OUTER_LOW : SegmentIntersection::OUTER_HIGH) : (low ? SegmentIntersection::OUTER_LOW : SegmentIntersection::OUTER_HIGH) :
(low ? SegmentIntersection::INNER_LOW : SegmentIntersection::INNER_HIGH); (low ? SegmentIntersection::INNER_LOW : SegmentIntersection::INNER_HIGH);
if (j > 0 && if (j > 0 &&
sil.intersections[i].pos == sil.intersections[j-1].pos && sil.intersections[i].pos() == sil.intersections[j-1].pos() &&
sil.intersections[i].type == sil.intersections[j-1].type &&
sil.intersections[i].iContour == sil.intersections[j-1].iContour) { sil.intersections[i].iContour == sil.intersections[j-1].iContour) {
// This has to be a corner point crossing the vertical line. if (sil.intersections[i].type == sil.intersections[j-1].type) {
// Remove the second intersection point. // This has to be a corner point crossing the vertical line.
#ifdef SLIC3R_DEBUG // Remove the second intersection point.
size_t iSegment2 = sil.intersections[j-1].iSegment; #ifdef SLIC3R_DEBUG
size_t iPrev2 = ((iSegment2 == 0) ? contour.size() : iSegment2) - 1; size_t iSegment2 = sil.intersections[j-1].iSegment;
myassert(iSegment == iPrev2 || iSegment2 == iPrev); size_t iPrev2 = ((iSegment2 == 0) ? contour.size() : iSegment2) - 1;
#endif /* SLIC3R_DEBUG */ myassert(iSegment == iPrev2 || iSegment2 == iPrev);
#endif /* SLIC3R_DEBUG */
} else {
// This is a loop returning to the same point.
// It may as well be a vertex of a loop touching this vertical line.
// Remove both the lines.
-- j;
}
} else { } else {
if (j < i) if (j < i)
sil.intersections[j] = sil.intersections[i]; sil.intersections[j] = sil.intersections[i];
++ j; ++ j;
} }
//FIXME solve a degenerate case, where there is a vertical segment on this vertical line and the contour
// follows from left to right or vice versa, leading to low,low or high,high intersections.
} }
// Shrink the list of intersections, if any of the intersection was removed during the classification. // Shrink the list of intersections, if any of the intersection was removed during the classification.
if (j < sil.intersections.size()) if (j < sil.intersections.size())
sil.intersections.erase(sil.intersections.begin() + j, sil.intersections.end()); sil.intersections.erase(sil.intersections.begin() + j, sil.intersections.end());
} }
#ifdef SLIC3R_DEBUG // Verify the segments. If something is wrong, give up.
// Verify the segments & paint them. #define ASSERT_OR_RETURN(CONDITION) do { assert(CONDITION); if (CONDITION) return false; } while (0)
for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) { for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) {
SegmentedIntersectionLine &sil = segs[i_seg]; SegmentedIntersectionLine &sil = segs[i_seg];
// The intersection points have to be even. // The intersection points have to be even.
myassert((sil.intersections.size() & 1) == 0); ASSERT_OR_RETURN((sil.intersections.size() & 1) == 0);
for (size_t i = 0; i < sil.intersections.size();) { for (size_t i = 0; i < sil.intersections.size();) {
// An intersection segment crossing the bigger contour may cross the inner offsetted contour even number of times. // An intersection segment crossing the bigger contour may cross the inner offsetted contour even number of times.
myassert(sil.intersections[i].type == SegmentIntersection::OUTER_LOW); ASSERT_OR_RETURN(sil.intersections[i].type == SegmentIntersection::OUTER_LOW);
size_t j = i + 1;
ASSERT_OR_RETURN(j < sil.intersections.size());
ASSERT_OR_RETURN(sil.intersections[j].type == SegmentIntersection::INNER_LOW || sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
for (; j < sil.intersections.size() && sil.intersections[j].is_inner(); ++ j) ;
ASSERT_OR_RETURN(j < sil.intersections.size());
ASSERT_OR_RETURN((j & 1) == 1);
ASSERT_OR_RETURN(sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
ASSERT_OR_RETURN(i + 1 == j || sil.intersections[j - 1].type == SegmentIntersection::INNER_HIGH);
i = j + 1;
}
}
#undef ASSERT_OR_RETURN
#ifdef SLIC3R_DEBUG
// Paint the segments and finalize the SVG file.
for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) {
SegmentedIntersectionLine &sil = segs[i_seg];
for (size_t i = 0; i < sil.intersections.size();) {
size_t j = i + 1; size_t j = i + 1;
myassert(j < sil.intersections.size());
myassert(sil.intersections[j].type == SegmentIntersection::INNER_LOW || sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
for (; j < sil.intersections.size() && sil.intersections[j].is_inner(); ++ j) ; for (; j < sil.intersections.size() && sil.intersections[j].is_inner(); ++ j) ;
myassert(j < sil.intersections.size());
myassert((j & 1) == 1);
myassert(sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
myassert(i + 1 == j || sil.intersections[j - 1].type == SegmentIntersection::INNER_HIGH);
if (i + 1 == j) { if (i + 1 == j) {
svg.draw(Line(Point(sil.pos, sil.intersections[i].pos), Point(sil.pos, sil.intersections[j].pos)), "blue"); svg.draw(Line(Point(sil.pos, sil.intersections[i].pos()), Point(sil.pos, sil.intersections[j].pos())), "blue");
} else { } else {
svg.draw(Line(Point(sil.pos, sil.intersections[i].pos), Point(sil.pos, sil.intersections[i+1].pos)), "green"); svg.draw(Line(Point(sil.pos, sil.intersections[i].pos()), Point(sil.pos, sil.intersections[i+1].pos())), "green");
svg.draw(Line(Point(sil.pos, sil.intersections[i+1].pos), Point(sil.pos, sil.intersections[j-1].pos)), (j - i + 1 > 4) ? "yellow" : "magenta"); svg.draw(Line(Point(sil.pos, sil.intersections[i+1].pos()), Point(sil.pos, sil.intersections[j-1].pos())), (j - i + 1 > 4) ? "yellow" : "magenta");
svg.draw(Line(Point(sil.pos, sil.intersections[j-1].pos), Point(sil.pos, sil.intersections[j].pos)), "green"); svg.draw(Line(Point(sil.pos, sil.intersections[j-1].pos()), Point(sil.pos, sil.intersections[j].pos())), "green");
} }
i = j + 1; i = j + 1;
} }
} }
svg.Close(); svg.Close();
// Verify the segments & paint them.
for (size_t i_seg = 0; i_seg < segs.size(); ++ i_seg) {
SegmentedIntersectionLine &sil = segs[i_seg];
// The intersection points have to be even.
myassert((sil.intersections.size() & 1) == 0);
for (size_t i = 0; i < sil.intersections.size();) {
// An intersection segment crossing the bigger contour may cross the inner offsetted contour even number of times.
myassert(sil.intersections[i].type == SegmentIntersection::OUTER_LOW);
size_t j = i + 1;
myassert(j < sil.intersections.size());
myassert(sil.intersections[j].type == SegmentIntersection::INNER_LOW || sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
for (; j < sil.intersections.size() && sil.intersections[j].is_inner(); ++ j) ;
myassert(j < sil.intersections.size());
myassert((j & 1) == 1);
myassert(sil.intersections[j].type == SegmentIntersection::OUTER_HIGH);
myassert(i + 1 == j || sil.intersections[j - 1].type == SegmentIntersection::INNER_HIGH);
i = j + 1;
}
}
#endif /* SLIC3R_DEBUG */ #endif /* SLIC3R_DEBUG */
// Mark an outer only chord as consumed, so there will be no tiny pieces emitted. // Mark an outer only chord as consumed, so there will be no tiny pieces emitted.
@ -992,7 +1096,9 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
// Now construct a graph. // Now construct a graph.
// Find the first point. // Find the first point.
//FIXME ideally one would plan the initial point to be closest to the current print head position. // Naively one would expect to achieve best results by chaining the paths by the shortest distance,
// but that procedure does not create the longest continuous paths.
// A simple "sweep left to right" procedure achieves better results.
size_t i_vline = 0; size_t i_vline = 0;
size_t i_intersection = size_t(-1); size_t i_intersection = size_t(-1);
// Follow the line, connect the lines into a graph. // Follow the line, connect the lines into a graph.
@ -1020,7 +1126,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
intrsctn.consumed_vertical_up : intrsctn.consumed_vertical_up :
seg.intersections[i-1].consumed_vertical_up; seg.intersections[i-1].consumed_vertical_up;
if (! consumed) { if (! consumed) {
coordf_t dist2 = sqr(coordf_t(pointLast.x - seg.pos)) + sqr(coordf_t(pointLast.y - intrsctn.pos)); coordf_t dist2 = sqr(coordf_t(pointLast.x - seg.pos)) + sqr(coordf_t(pointLast.y - intrsctn.pos()));
if (dist2 < dist2min) { if (dist2 < dist2min) {
dist2min = dist2; dist2min = dist2;
i_vline = i_vline2; i_vline = i_vline2;
@ -1044,7 +1150,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
polylines_out.push_back(Polyline()); polylines_out.push_back(Polyline());
polyline_current = &polylines_out.back(); polyline_current = &polylines_out.back();
// Emit the first point of a path. // Emit the first point of a path.
pointLast = Point(segs[i_vline].pos, segs[i_vline].intersections[i_intersection].pos); pointLast = Point(segs[i_vline].pos, segs[i_vline].intersections[i_intersection].pos());
polyline_current->points.push_back(pointLast); polyline_current->points.push_back(pointLast);
} }
@ -1190,7 +1296,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
(distNext < distPrev) : (distNext < distPrev) :
intrsctn_type_next == INTERSECTION_TYPE_OTHER_VLINE_OK; intrsctn_type_next == INTERSECTION_TYPE_OTHER_VLINE_OK;
myassert(intrsctn->is_inner()); myassert(intrsctn->is_inner());
polyline_current->points.push_back(Point(seg.pos, intrsctn->pos)); polyline_current->points.push_back(Point(seg.pos, intrsctn->pos()));
emit_perimeter_prev_next_segment(poly_with_offset, segs, i_vline, intrsctn->iContour, i_intersection, take_next ? iNext : iPrev, *polyline_current, take_next); emit_perimeter_prev_next_segment(poly_with_offset, segs, i_vline, intrsctn->iContour, i_intersection, take_next ? iNext : iPrev, *polyline_current, take_next);
// Mark both the left and right connecting segment as consumed, because one cannot go to this intersection point as it has been consumed. // Mark both the left and right connecting segment as consumed, because one cannot go to this intersection point as it has been consumed.
if (iPrev != -1) if (iPrev != -1)
@ -1241,7 +1347,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
distance_of_segmens(poly, intrsctn->iSegment, iSegNext, false)) : distance_of_segmens(poly, intrsctn->iSegment, iSegNext, false)) :
(vert_seg_dir_valid_mask == DIR_FORWARD); (vert_seg_dir_valid_mask == DIR_FORWARD);
// Consume the connecting contour and the next segment. // Consume the connecting contour and the next segment.
polyline_current->points.push_back(Point(seg.pos, intrsctn->pos)); polyline_current->points.push_back(Point(seg.pos, intrsctn->pos()));
emit_perimeter_segment_on_vertical_line(poly_with_offset, segs, i_vline, intrsctn->iContour, i_intersection, iNext, *polyline_current, dir_forward); emit_perimeter_segment_on_vertical_line(poly_with_offset, segs, i_vline, intrsctn->iContour, i_intersection, iNext, *polyline_current, dir_forward);
// Mark both the left and right connecting segment as consumed, because one cannot go to this intersection point as it has been consumed. // Mark both the left and right connecting segment as consumed, because one cannot go to this intersection point as it has been consumed.
// If there are any outer intersection points skipped (bypassed) by the contour, // If there are any outer intersection points skipped (bypassed) by the contour,
@ -1277,7 +1383,7 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
// reset the current vertical line to pick a new starting point in the next round. // reset the current vertical line to pick a new starting point in the next round.
myassert(intrsctn->is_outer()); myassert(intrsctn->is_outer());
myassert(intrsctn->is_high() == going_up); myassert(intrsctn->is_high() == going_up);
pointLast = Point(seg.pos, intrsctn->pos); pointLast = Point(seg.pos, intrsctn->pos());
polyline_current->points.push_back(pointLast); polyline_current->points.push_back(pointLast);
// Handle duplicate points and zero length segments. // Handle duplicate points and zero length segments.
polyline_current->remove_duplicate_points(); polyline_current->remove_duplicate_points();
@ -1296,30 +1402,15 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
#ifdef SLIC3R_DEBUG #ifdef SLIC3R_DEBUG
{ {
{ {
sprintf(path, "out\\FillRectilinear2-final-%03d.svg", iRun); ::Slic3r::SVG svg(debug_out_path("FillRectilinear2-final-%03d.svg", iRun), bbox_svg); // , scale_(1.));
::Slic3r::SVG svg(path, bbox_svg); // , scale_(1.)); poly_with_offset.export_to_svg(svg);
for (size_t i = 0; i < poly_with_offset.polygons_src.size(); ++ i)
svg.draw(poly_with_offset.polygons_src[i].lines());
for (size_t i = 0; i < poly_with_offset.polygons_outer.size(); ++ i)
svg.draw(poly_with_offset.polygons_outer[i].lines(), "green");
for (size_t i = 0; i < poly_with_offset.polygons_inner.size(); ++ i)
svg.draw(poly_with_offset.polygons_inner[i].lines(), "brown");
for (size_t i = n_polylines_out_initial; i < polylines_out.size(); ++ i) for (size_t i = n_polylines_out_initial; i < polylines_out.size(); ++ i)
svg.draw(polylines_out[i].lines(), "black"); svg.draw(polylines_out[i].lines(), "black");
svg.Close();
} }
// Paint a picture per polyline. This makes it easier to discover the order of the polylines and their overlap. // Paint a picture per polyline. This makes it easier to discover the order of the polylines and their overlap.
for (size_t i_polyline = n_polylines_out_initial; i_polyline < polylines_out.size(); ++ i_polyline) { for (size_t i_polyline = n_polylines_out_initial; i_polyline < polylines_out.size(); ++ i_polyline) {
sprintf(path, "out\\FillRectilinear2-final-%03d-%03d.svg", iRun, i_polyline); ::Slic3r::SVG svg(debug_out_path("FillRectilinear2-final-%03d-%03d.svg", iRun, i_polyline), bbox_svg); // , scale_(1.));
::Slic3r::SVG svg(path, bbox_svg); // , scale_(1.));
for (size_t i = 0; i < poly_with_offset.polygons_src.size(); ++ i)
svg.draw(poly_with_offset.polygons_src[i].lines());
for (size_t i = 0; i < poly_with_offset.polygons_outer.size(); ++ i)
svg.draw(poly_with_offset.polygons_outer[i].lines(), "green");
for (size_t i = 0; i < poly_with_offset.polygons_inner.size(); ++ i)
svg.draw(poly_with_offset.polygons_inner[i].lines(), "brown");
svg.draw(polylines_out[i_polyline].lines(), "black"); svg.draw(polylines_out[i_polyline].lines(), "black");
svg.Close();
} }
} }
#endif /* SLIC3R_DEBUG */ #endif /* SLIC3R_DEBUG */
@ -1340,20 +1431,26 @@ void FillRectilinear2::fill_surface_by_lines(const Surface *surface, const FillP
for (Polylines::iterator it = polylines_out.begin(); it != polylines_out.end(); ++ it) for (Polylines::iterator it = polylines_out.begin(); it != polylines_out.end(); ++ it)
myassert(! it->has_duplicate_points()); myassert(! it->has_duplicate_points());
#endif /* SLIC3R_DEBUG */ #endif /* SLIC3R_DEBUG */
return true;
} }
Polylines FillRectilinear2::fill_surface(const Surface *surface, const FillParams &params) Polylines FillRectilinear2::fill_surface(const Surface *surface, const FillParams &params)
{ {
Polylines polylines_out; Polylines polylines_out;
fill_surface_by_lines(surface, params, 0.f, polylines_out); if (! fill_surface_by_lines(surface, params, 0.f, polylines_out)) {
printf("FillRectilinear2::fill_surface() failed to fill a region.\n");
}
return polylines_out; return polylines_out;
} }
Polylines FillGrid2::fill_surface(const Surface *surface, const FillParams &params) Polylines FillGrid2::fill_surface(const Surface *surface, const FillParams &params)
{ {
Polylines polylines_out; Polylines polylines_out;
fill_surface_by_lines(surface, params, 0.f, polylines_out); if (! fill_surface_by_lines(surface, params, 0.f, polylines_out) ||
fill_surface_by_lines(surface, params, float(M_PI / 2.), polylines_out); ! fill_surface_by_lines(surface, params, float(M_PI / 2.), polylines_out)) {
printf("FillRectilinear2::fill_surface() failed to fill a region.\n");
}
return polylines_out; return polylines_out;
} }

2
xs/src/libslic3r/Fill/FillRectilinear2.hpp
View File

@ -16,7 +16,7 @@ public:
virtual Polylines fill_surface(const Surface *surface, const FillParams &params); virtual Polylines fill_surface(const Surface *surface, const FillParams &params);
protected: protected:
void fill_surface_by_lines(const Surface *surface, const FillParams &params, float angleBase, Polylines &polylines_out); bool fill_surface_by_lines(const Surface *surface, const FillParams &params, float angleBase, Polylines &polylines_out);
coord_t _min_spacing; coord_t _min_spacing;
coord_t _line_spacing; coord_t _line_spacing;

2
xs/src/libslic3r/Polygon.cpp
View File

@ -406,7 +406,7 @@ bool remove_small(Polygons &polys, double min_area)
bool modified = false; bool modified = false;
size_t j = 0; size_t j = 0;
for (size_t i = 0; i < polys.size(); ++ i) { for (size_t i = 0; i < polys.size(); ++ i) {
if (polys[i].area() >= min_area) { if (std::abs(polys[i].area()) >= min_area) {
if (j < i) if (j < i)
std::swap(polys[i].points, polys[j].points); std::swap(polys[i].points, polys[j].points);
++ j; ++ j;

28
xs/src/libslic3r/SVG.cpp
View File

@ -5,24 +5,31 @@
namespace Slic3r { namespace Slic3r {
SVG::SVG(const char* filename) bool SVG::open(const char* afilename)
: arrows(false), fill("grey"), stroke("black"), filename(filename), flipY(false)
{ {
this->f = fopen(filename, "w"); this->filename = afilename;
this->f = fopen(afilename, "w");
if (this->f == NULL)
return false;
fprintf(this->f, fprintf(this->f,
"<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"yes\"?>\n" "<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"yes\"?>\n"
"<!DOCTYPE svg PUBLIC \"-//W3C//DTD SVG 1.0//EN\" \"http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd\">\n" "<!DOCTYPE svg PUBLIC \"-//W3C//DTD SVG 1.0//EN\" \"http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd\">\n"
"<svg height=\"2000\" width=\"2000\" xmlns=\"http://www.w3.org/2000/svg\" xmlns:svg=\"http://www.w3.org/2000/svg\" xmlns:xlink=\"http://www.w3.org/1999/xlink\">\n" "<svg height=\"2000\" width=\"2000\" xmlns=\"http://www.w3.org/2000/svg\" xmlns:svg=\"http://www.w3.org/2000/svg\" xmlns:xlink=\"http://www.w3.org/1999/xlink\">\n"
" <marker id=\"endArrow\" markerHeight=\"8\" markerUnits=\"strokeWidth\" markerWidth=\"10\" orient=\"auto\" refX=\"1\" refY=\"5\" viewBox=\"0 0 10 10\">\n" " <marker id=\"endArrow\" markerHeight=\"8\" markerUnits=\"strokeWidth\" markerWidth=\"10\" orient=\"auto\" refX=\"1\" refY=\"5\" viewBox=\"0 0 10 10\">\n"
" <polyline fill=\"darkblue\" points=\"0,0 10,5 0,10 1,5\" />\n" " <polyline fill=\"darkblue\" points=\"0,0 10,5 0,10 1,5\" />\n"
" </marker>\n" " </marker>\n"
); );
return true;
} }
SVG::SVG(const char* filename, const BoundingBox &bbox, const coord_t bbox_offset, bool aflipY) bool SVG::open(const char* afilename, const BoundingBox &bbox, const coord_t bbox_offset, bool aflipY)
: arrows(false), fill("grey"), stroke("black"), filename(filename), origin(bbox.min - Point(bbox_offset, bbox_offset)), flipY(aflipY)
{ {
this->f = fopen(filename, "w"); this->filename = afilename;
this->origin = bbox.min - Point(bbox_offset, bbox_offset);
this->flipY = aflipY;
this->f = ::fopen(afilename, "w");
if (f == NULL)
return false;
float w = COORD(bbox.max.x - bbox.min.x + 2 * bbox_offset); float w = COORD(bbox.max.x - bbox.min.x + 2 * bbox_offset);
float h = COORD(bbox.max.y - bbox.min.y + 2 * bbox_offset); float h = COORD(bbox.max.y - bbox.min.y + 2 * bbox_offset);
fprintf(this->f, fprintf(this->f,
@ -33,6 +40,7 @@ SVG::SVG(const char* filename, const BoundingBox &bbox, const coord_t bbox_offse
" <polyline fill=\"darkblue\" points=\"0,0 10,5 0,10 1,5\" />\n" " <polyline fill=\"darkblue\" points=\"0,0 10,5 0,10 1,5\" />\n"
" </marker>\n", " </marker>\n",
h, w); h, w);
return true;
} }
void void

21
xs/src/libslic3r/SVG.hpp
View File

@ -18,10 +18,27 @@ class SVG
Point origin; Point origin;
bool flipY; bool flipY;
SVG(const char* filename); SVG(const char* afilename) :
SVG(const char* filename, const BoundingBox &bbox, const coord_t bbox_offset = scale_(1.), bool flipY = false); arrows(false), fill("grey"), stroke("black"), filename(afilename), flipY(false)
{ open(filename); }
SVG(const char* afilename, const BoundingBox &bbox, const coord_t bbox_offset = scale_(1.), bool aflipY = false) :
arrows(false), fill("grey"), stroke("black"), filename(afilename), origin(bbox.min - Point(bbox_offset, bbox_offset)), flipY(aflipY)
{ open(filename, bbox, bbox_offset, aflipY); }
SVG(const std::string &filename) :
arrows(false), fill("grey"), stroke("black"), filename(filename), flipY(false)
{ open(filename); }
SVG(const std::string &filename, const BoundingBox &bbox, const coord_t bbox_offset = scale_(1.), bool aflipY = false) :
arrows(false), fill("grey"), stroke("black"), filename(filename), origin(bbox.min - Point(bbox_offset, bbox_offset)), flipY(aflipY)
{ open(filename, bbox, bbox_offset, aflipY); }
~SVG() { if (f != NULL) Close(); } ~SVG() { if (f != NULL) Close(); }
bool open(const char* filename);
bool open(const char* filename, const BoundingBox &bbox, const coord_t bbox_offset = scale_(1.), bool flipY = false);
bool open(const std::string &filename)
{ return open(filename.c_str()); }
bool open(const std::string &filename, const BoundingBox &bbox, const coord_t bbox_offset = scale_(1.), bool flipY = false)
{ return open(filename.c_str(), bbox, bbox_offset, flipY); }
void draw(const Line &line, std::string stroke = "black", coordf_t stroke_width = 0); void draw(const Line &line, std::string stroke = "black", coordf_t stroke_width = 0);
void draw(const ThickLine &line, const std::string &fill, const std::string &stroke, coordf_t stroke_width = 0); void draw(const ThickLine &line, const std::string &fill, const std::string &stroke, coordf_t stroke_width = 0);
void draw(const Lines &lines, std::string stroke = "black", coordf_t stroke_width = 0); void draw(const Lines &lines, std::string stroke = "black", coordf_t stroke_width = 0);

2
xs/src/libslic3r/SupportMaterial.cpp
View File

@ -144,7 +144,7 @@ PrintObjectSupportMaterial::PrintObjectSupportMaterial(const PrintObject *object
} }
} }
m_object_1st_layer_gap = m_soluble_interface ? 0 : m_object_config->support_material_contact_distance; m_object_1st_layer_gap = m_soluble_interface ? 0. : m_object_config->support_material_contact_distance.value;
m_object_1st_layer_print_z = m_raft_height + m_object_1st_layer_gap + m_object_1st_layer_height; m_object_1st_layer_print_z = m_raft_height + m_object_1st_layer_gap + m_object_1st_layer_height;
} }
else else

3
xs/src/libslic3r/SupportMaterial.hpp
View File

@ -2,6 +2,7 @@
#define slic3r_SupportMaterial_hpp_ #define slic3r_SupportMaterial_hpp_
#include "Flow.hpp" #include "Flow.hpp"
#include "PrintConfig.hpp"
namespace Slic3r { namespace Slic3r {
@ -120,7 +121,7 @@ public:
// Height of the 1st layer is user configured as it is important for the print // Height of the 1st layer is user configured as it is important for the print
// to stick to he print bed. // to stick to he print bed.
coordf_t first_layer_height() const { return m_object_config->first_layer_height.value; } coordf_t first_layer_height() const { return m_object_config->first_layer_height.value; }
// Is raft enabled? // Is raft enabled?
bool has_raft() const { return m_has_raft; } bool has_raft() const { return m_has_raft; }

13
xs/src/libslic3r/libslic3r.h
View File

@ -6,6 +6,7 @@
#include <iostream> #include <iostream>
#include <sstream> #include <sstream>
#include <stdint.h> #include <stdint.h>
#include <stdarg.h>
#define SLIC3R_VERSION "1.3.0-dev" #define SLIC3R_VERSION "1.3.0-dev"
@ -63,6 +64,18 @@ void confess_at(const char *file, int line, const char *func, const char *pat, .
#define SLIC3R_CPPVER 0 #define SLIC3R_CPPVER 0
#endif #endif
#define DEBUG_FILE_PREFIX "out/"
inline std::string debug_out_path(const char *name, ...)
{
char buffer[2048];
va_list args;
va_start(args, name);
vsprintf(buffer, name, args);
va_end(args);
return std::string(DEBUG_FILE_PREFIX) + std::string(buffer);
}
// Write slices as SVG images into out directory during the 2D processing of the slices. // Write slices as SVG images into out directory during the 2D processing of the slices.
// #define SLIC3R_DEBUG_SLICE_PROCESSING // #define SLIC3R_DEBUG_SLICE_PROCESSING