diff --git a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
index b25a6c671..c70b07b03 100644
--- a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini	
+++ b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini	
@@ -569,7 +569,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.1
@@ -1099,7 +1099,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.15
@@ -1735,7 +1735,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
@@ -2265,7 +2265,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.35
diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
index b9312e588..fca8758e3 100644
--- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini	
+++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini	
@@ -569,7 +569,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.1
@@ -1099,7 +1099,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.15
@@ -1735,7 +1735,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
@@ -2265,7 +2265,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.35
diff --git a/resources/profiles/Original Prusa i3 MK2MM.ini b/resources/profiles/Original Prusa i3 MK2MM.ini
index 72daf721d..abcb90ec4 100644
--- a/resources/profiles/Original Prusa i3 MK2MM.ini	
+++ b/resources/profiles/Original Prusa i3 MK2MM.ini	
@@ -569,7 +569,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.1
@@ -1099,7 +1099,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.15
@@ -1735,7 +1735,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
@@ -2265,7 +2265,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.35
diff --git a/resources/profiles/Original Prusa i3 MK3.ini b/resources/profiles/Original Prusa i3 MK3.ini
index ea02885a0..228cdb130 100644
--- a/resources/profiles/Original Prusa i3 MK3.ini	
+++ b/resources/profiles/Original Prusa i3 MK3.ini	
@@ -569,7 +569,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.1
@@ -1099,7 +1099,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.15
@@ -1735,7 +1735,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
@@ -2265,7 +2265,7 @@ infill_extruder = 1
 infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 35%
+infill_overlap = 25%
 infill_speed = 200
 interface_shells = 0
 layer_height = 0.35