diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index aa95ed6df..bbd43027e 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -151,9 +151,9 @@ top_infill_extrusion_width = 0.45 bottom_solid_layers = 3 top_solid_layers = 4 -[print:0.12mm DETAIL ENDER3] +[print:0.12mm DETAIL @ENDER3] inherits = *0.12mm* -alias=0.12mm DETAIL +# alias = 0.12mm DETAIL travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 @@ -161,9 +161,9 @@ top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4 -[print:0.20mm NORMAL ENDER3] +[print:0.20mm NORMAL @ENDER3] inherits = *0.20mm* -alias=0.20mm NORMAL +# alias = 0.20mm NORMAL travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 @@ -171,9 +171,9 @@ top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4 -[print:0.24mm DRAFT ENDER3] +[print:0.24mm DRAFT @ENDER3] inherits = *0.24mm* -alias=0.24mm DRAFT +# alias = 0.24mm DRAFT travel_speed = 150 infill_speed = 50 solid_infill_speed = 40 @@ -185,7 +185,6 @@ compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]== [filament:*common*] cooling = 0 compatible_printers = -compatible_printers_condition = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 @@ -195,6 +194,7 @@ filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ [filament:*PLA*] inherits = *common* @@ -242,7 +242,7 @@ disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 11 -filament_type = PLA +filament_type = ABS filament_density = 1.04 filament_cost = 20 first_layer_bed_temperature = 100 @@ -254,31 +254,36 @@ bridge_fan_speed = 30 top_fan_speed = 0 temperature = 245 -[filament:Generic PLA ENDER3] +[filament:Generic PLA @ENDER3] inherits = *PLA* -alias=Generic PLA +# alias = Generic PLA +filament_vendor = Generic -[filament:Generic PET ENDER3] +[filament:Generic PET @ENDER3] inherits = *PET* -alias=Generic PET +# alias = Generic PET +filament_vendor = Generic -[filament:Generic ABS ENDER3] +[filament:Generic ABS @ENDER3] inherits = *ABS* -alias=Generic ABS +# alias = Generic ABS first_layer_bed_temperature = 90 bed_temperature = 90 +filament_vendor = Generic -[filament:Creality PLA ENDER3] +[filament:Creality PLA @ENDER3] inherits = *PLA* -alias=Creality PLA +# alias = Creality PLA +filament_vendor = Creality temperature = 205 bed_temperature = 40 first_layer_temperature = 210 first_layer_bed_temperature =40 -[filament:Creality PET ENDER3] +[filament:Creality PET @ENDER3] inherits = *PET* -alias=Creality PET +# alias = Creality PET +filament_vendor = Creality temperature = 240 bed_temperature = 70 first_layer_temperature = 240 @@ -286,17 +291,19 @@ first_layer_bed_temperature =70 max_fan_speed = 40 min_fan_speed = 20 -[filament:Creality ABS ENDER3] +[filament:Creality ABS @ENDER3] inherits = *ABS* -alias=Creality ABS +# alias = Creality ABS +filament_vendor = Creality temperature = 240 bed_temperature = 90 first_layer_temperature = 240 first_layer_bed_temperature =90 -[filament:Prusament PLA ENDER3] +[filament:Prusament PLA @ENDER3] inherits = *PLA* -alias=Prusament PLA +# alias = Prusament PLA +filament_vendor = Prusa Polymers temperature = 215 bed_temperature = 40 first_layer_temperature = 215 @@ -304,9 +311,10 @@ first_layer_bed_temperature =40 filament_cost = 24.99 filament_density = 1.24 -[filament:Prusament PETG ENDER3] +[filament:Prusament PETG @ENDER3] inherits = *PET* -alias=Prusament PETG +# alias = Prusament PETG +filament_vendor = Prusa Polymers temperature = 245 bed_temperature = 70 first_layer_temperature = 245 @@ -384,6 +392,7 @@ printer_model = ENDER3 printer_variant = 0.4 max_layer_height = 0.25 min_layer_height = 0.1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3 bed_shape = 0x0,220x0,220x220,0x220 max_print_height = 250 machine_max_acceleration_e = 5000 @@ -401,8 +410,7 @@ machine_max_jerk_x = 8 machine_max_jerk_y = 8 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 -printer_notes = +machine_min_travel_rate = 0 nozzle_diameter = 0.4 retract_before_travel = 2 retract_length = 5 diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index f67e38285..f9931031d 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -19,7 +19,7 @@ changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1% [printer_model:MINI] name = Original Prusa MINI -variants = 0.4; 0.25 +variants = 0.4; 0.25; 0.6 technology = FFF family = MINI @@ -329,6 +329,30 @@ support_material_contact_distance = 0.15 support_material_xy_spacing = 80% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +[print:*0.6nozzleMINI*] +external_perimeter_extrusion_width = 0.65 +extrusion_width = 0.65 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.68 +perimeter_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.68 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.55 +bridge_flow_ratio = 0.95 +bridge_speed = 25 +support_material_contact_distance = 0.15 +support_material_xy_spacing = 80% +fill_pattern = gyroid +fill_density = 15% +travel_speed = 150 +perimeter_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 1000 +first_layer_acceleration = 1000 +default_acceleration = 1250 +support_material_speed = 40 +output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode + [print:*soluble_support*] overhangs = 1 skirts = 0 @@ -375,23 +399,23 @@ top_solid_layers = 15 [print:0.05mm ULTRADETAIL] inherits = *0.05mm* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 infill_extrusion_width = 0.5 # MK3 # -[print:0.05mm ULTRADETAIL MK3] +[print:0.05mm ULTRADETAIL @MK3] inherits = *0.05mm*; *MK3* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 # MK2 # -[print:0.05mm ULTRADETAIL 0.25 nozzle] +[print:0.05mm ULTRADETAIL @0.25 nozzle] inherits = *0.05mm*; *0.25nozzle* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_density = 20% infill_speed = 20 @@ -402,9 +426,9 @@ solid_infill_speed = 20 support_material_speed = 20 # MK3 # -[print:0.05mm ULTRADETAIL 0.25 nozzle MK3] +[print:0.05mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.05mm*; *0.25nozzle*; *MK3* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_pattern = grid fill_density = 20% @@ -442,14 +466,14 @@ top_solid_layers = 11 # MK3 # [print:0.07mm ULTRADETAIL MK3] inherits = *0.07mm*; *MK3* -alias = 0.07mm ULTRADETAIL +# alias = 0.07mm ULTRADETAIL fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 -[print:0.07mm ULTRADETAIL 0.25 nozzle MK3] +[print:0.07mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.07mm*; *0.25nozzle*; *MK3* -alias = 0.07mm ULTRADETAIL +# alias = 0.07mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 infill_speed = 30 solid_infill_speed = 30 @@ -475,7 +499,7 @@ top_solid_layers = 9 # MK2 # [print:0.10mm DETAIL] inherits = *0.10mm* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 external_perimeter_speed = 40 infill_acceleration = 2000 @@ -484,9 +508,9 @@ perimeter_speed = 50 solid_infill_speed = 50 # MK3 # -[print:0.10mm DETAIL MK3] +[print:0.10mm DETAIL @MK3] inherits = *0.10mm*; *MK3* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material external_perimeter_speed = 25 @@ -501,9 +525,9 @@ fill_pattern = gyroid fill_density = 15% # MK2 # -[print:0.10mm DETAIL 0.25 nozzle] +[print:0.10mm DETAIL @0.25 nozzle] inherits = *0.10mm*; *0.25nozzle* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL bridge_acceleration = 600 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 @@ -516,9 +540,9 @@ solid_infill_speed = 40 top_solid_infill_speed = 30 # MK3 # -[print:0.10mm DETAIL 0.25 nozzle MK3] +[print:0.10mm DETAIL @0.25 nozzle MK3] inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% @@ -557,14 +581,14 @@ top_solid_infill_speed = 70 # MK2 # [print:0.15mm OPTIMAL] inherits = *0.15mm* -alias = 0.15mm OPTIMAL +# alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.45 # MK2 # -[print:0.15mm OPTIMAL 0.25 nozzle] +[print:0.15mm OPTIMAL @0.25 nozzle] inherits = *0.15mm*; *0.25nozzle* -alias = 0.15mm OPTIMAL +# alias = 0.15mm OPTIMAL bridge_acceleration = 600 bridge_flow_ratio = 0.7 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 @@ -578,15 +602,15 @@ solid_infill_speed = 40 top_solid_infill_speed = 30 # MK2 # -[print:0.15mm OPTIMAL 0.6 nozzle] +[print:0.15mm OPTIMAL @0.6 nozzle] inherits = *0.15mm*; *0.6nozzle* -alias = 0.15mm OPTIMAL +# alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK3 # -[print:0.15mm QUALITY MK3] +[print:0.15mm QUALITY @MK3] inherits = *0.15mm*; *MK3* -alias = 0.15mm QUALITY +# alias = 0.15mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 @@ -599,9 +623,9 @@ top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% -[print:0.15mm SPEED MK3] +[print:0.15mm SPEED @MK3] inherits = *0.15mm*; *MK3* -alias = 0.15mm SPEED +# alias = 0.15mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 @@ -613,9 +637,9 @@ solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # -[print:0.15mm SOLUBLE FULL MK3] -inherits = 0.15mm SPEED MK3; *soluble_support* -alias = 0.15mm SOLUBLE FULL +[print:0.15mm SOLUBLE FULL @MK3] +inherits = 0.15mm SPEED @MK3; *soluble_support* +# alias = 0.15mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 @@ -626,9 +650,9 @@ top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # -[print:0.15mm SOLUBLE INTERFACE MK3] -inherits = 0.15mm SOLUBLE FULL MK3 -alias = 0.15mm SOLUBLE INTERFACE +[print:0.15mm SOLUBLE INTERFACE @MK3] +inherits = 0.15mm SOLUBLE FULL @MK3 +# alias = 0.15mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 @@ -637,7 +661,7 @@ support_material_with_sheath = 0 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE FULL] inherits = *0.15mm*; *soluble_support* -alias = 0.15mm OPTIMAL SOLUBLE FULL +# alias = 0.15mm OPTIMAL SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 25 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder @@ -649,7 +673,7 @@ top_solid_infill_speed = 30 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE INTERFACE] inherits = 0.15mm OPTIMAL SOLUBLE FULL -alias = 0.15mm OPTIMAL SOLUBLE INTERFACE +# alias = 0.15mm OPTIMAL SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 @@ -657,17 +681,17 @@ support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # -[print:0.15mm QUALITY 0.25 nozzle MK3] +[print:0.15mm QUALITY @0.25 nozzle MK3] inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* -alias = 0.15mm QUALITY +# alias = 0.15mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # MK3 # -[print:0.15mm DETAIL 0.6 nozzle MK3] +[print:0.15mm DETAIL @0.6 nozzle MK3] inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* -alias = 0.15mm DETAIL +# alias = 0.15mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 @@ -709,9 +733,9 @@ support_material_speed = 60 top_solid_infill_speed = 70 # MK3 # -[print:0.20mm QUALITY MK3] +[print:0.20mm QUALITY @MK3] inherits = *0.20mm*; *MK3* -alias = 0.20mm QUALITY +# alias = 0.20mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 @@ -724,9 +748,9 @@ top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% -[print:0.20mm SPEED MK3] +[print:0.20mm SPEED @MK3] inherits = *0.20mm*; *MK3* -alias = 0.20mm SPEED +# alias = 0.20mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 @@ -738,9 +762,9 @@ solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # -[print:0.20mm SOLUBLE FULL MK3] -inherits = 0.20mm SPEED MK3; *soluble_support* -alias = 0.20mm SOLUBLE FULL +[print:0.20mm SOLUBLE FULL @MK3] +inherits = 0.20mm SPEED @MK3; *soluble_support* +# alias = 0.20mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 @@ -751,9 +775,9 @@ top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # -[print:0.20mm SOLUBLE INTERFACE MK3] -inherits = 0.20mm SOLUBLE FULL MK3 -alias = 0.20mm SOLUBLE INTERFACE +[print:0.20mm SOLUBLE INTERFACE @MK3] +inherits = 0.20mm SOLUBLE FULL @MK3 +# alias = 0.20mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 @@ -765,9 +789,9 @@ inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 # MK2 # -[print:0.20mm NORMAL 0.6 nozzle] +[print:0.20mm NORMAL @0.6 nozzle] inherits = *0.20mm*; *0.6nozzle* -alias = 0.20mm NORMAL +# alias = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # @@ -790,9 +814,9 @@ support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # -[print:0.20mm DETAIL 0.6 nozzle MK3] +[print:0.20mm DETAIL @0.6 nozzle MK3] inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* -alias = 0.20mm DETAIL +# alias = 0.20mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 @@ -835,9 +859,9 @@ solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 4 -[print:0.30mm QUALITY 0.6 nozzle MK3] +[print:0.30mm QUALITY @0.6 nozzle MK3] inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* -alias = 0.30mm QUALITY +# alias = 0.30mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 @@ -847,9 +871,9 @@ perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 -[print:0.30mm SOLUBLE FULL 0.6 nozzle MK3] -inherits = 0.30mm QUALITY 0.6 nozzle MK3; *soluble_support* -alias = 0.30mm SOLUBLE FULL +[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] +inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* +# alias = 0.30mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 @@ -862,17 +886,17 @@ support_material_extrusion_width = 0.6 top_solid_infill_speed = 30 support_material_xy_spacing = 80% -[print:0.30mm SOLUBLE INTERFACE 0.6 nozzle MK3] -inherits = 0.30mm SOLUBLE FULL 0.6 nozzle MK3 -alias = 0.30mm SOLUBLE INTERFACE +[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] +inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 +# alias = 0.30mm SOLUBLE INTERFACE notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 -[print:0.30mm DRAFT MK3] +[print:0.30mm DRAFT @MK3] inherits = *0.30mm*; *MK3* -alias = 0.30mm DRAFT +# alias = 0.30mm DRAFT bottom_solid_layers = 3 bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 @@ -927,15 +951,15 @@ top_infill_extrusion_width = 0.43 support_material_extrusion_width = 0.37 # MK2 # -[print:0.35mm FAST 0.6 nozzle] +[print:0.35mm FAST @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle* -alias = 0.35mm FAST +# alias = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # -[print:0.35mm FAST sol full 0.6 nozzle] +[print:0.35mm FAST sol full @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* -alias = 0.35mm FAST SOLUBLE FULL +# alias = 0.35mm FAST SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 @@ -948,18 +972,18 @@ top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 # MK2 MMU # -[print:0.35mm FAST sol int 0.6 nozzle] -inherits = 0.35mm FAST sol full 0.6 nozzle -alias = 0.35mm FAST SOLUBLE INTERFACE +[print:0.35mm FAST sol int @0.6 nozzle] +inherits = 0.35mm FAST sol full @0.6 nozzle +# alias = 0.35mm FAST SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 150% # MK3 # -[print:0.35mm SPEED 0.6 nozzle MK3] +[print:0.35mm SPEED @0.6 nozzle MK3] inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* -alias = 0.35mm SPEED +# alias = 0.35mm SPEED compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 @@ -993,9 +1017,9 @@ top_solid_infill_speed = 40 top_solid_layers = 4 # MK3 # -[print:0.40mm DRAFT 0.6 nozzle MK3] +[print:0.40mm DRAFT @0.6 nozzle MK3] inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* -alias = 0.40mm DRAFT +# alias = 0.40mm DRAFT compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 @@ -1014,77 +1038,77 @@ solid_infill_extrusion_width = 0.7 # XXXXXXXXXXXXXXXXXXXXXX # MK2.5 # -[print:0.15mm 100mms Linear Advance MK2.5] +[print:0.15mm 100mms Linear Advance @MK2.5] inherits = 0.15mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # -[print:0.15mm OPTIMAL MK2.5] +[print:0.15mm OPTIMAL @MK2.5] inherits = 0.15mm OPTIMAL -alias = 0.15mm OPTIMAL +# alias = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # -[print:0.15mm OPTIMAL SOLUBLE FULL MK2.5] +[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE FULL -alias = 0.15mm OPTIMAL SOLUBLE FULL +# alias = 0.15mm OPTIMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 MMU2 # -[print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5] +[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE -alias = 0.15mm OPTIMAL SOLUBLE INTERFACE +# alias = 0.15mm OPTIMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 # -[print:0.20mm 100mms Linear Advance MK2.5] +[print:0.20mm 100mms Linear Advance @MK2.5] inherits = 0.20mm 100mms Linear Advance -alias = 0.20mm 100mms Linear Advance +# alias = 0.20mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # -[print:0.20mm NORMAL MK2.5] +[print:0.20mm NORMAL @MK2.5] inherits = 0.20mm NORMAL -alias = 0.20mm NORMAL +# alias = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # -[print:0.20mm NORMAL SOLUBLE FULL MK2.5] +[print:0.20mm NORMAL SOLUBLE FULL @MK2.5] inherits = 0.20mm NORMAL SOLUBLE FULL -alias = 0.20mm NORMAL SOLUBLE FULL +# alias = 0.20mm NORMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # -[print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5] +[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.20mm NORMAL SOLUBLE INTERFACE -alias = 0.20mm NORMAL SOLUBLE INTERFACE +# alias = 0.20mm NORMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 # -[print:0.35mm FAST MK2.5] +[print:0.35mm FAST @MK2.5] inherits = 0.35mm FAST -alias = 0.35mm FAST +# alias = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 0.6 nozzle# -[print:0.35mm SOLUBLE FULL 0.6 nozzle MK2.5] +[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* -alias = 0.35mm SOLUBLE FULL +# alias = 0.35mm SOLUBLE FULL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 @@ -1098,9 +1122,9 @@ support_material_interface_extruder = 5 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 -[print:0.35mm SOLUBLE INTERFACE 0.6 nozzle MK2.5] -inherits = 0.35mm SOLUBLE FULL 0.6 nozzle MK2.5 -alias = 0.35mm SOLUBLE INTERFACE +[print:0.35mm SOLUBLE INTERFACE 0.6 nozzle @MK2.5] +inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5 +# alias = 0.35mm SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 @@ -1110,9 +1134,9 @@ support_material_xy_spacing = 80% # 0.4mm nozzle -[print:0.05mm ULTRADETAIL MINI] +[print:0.05mm ULTRADETAIL @MINI] inherits = *0.05mm*; *MINI* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 @@ -1121,9 +1145,9 @@ small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 -[print:0.07mm ULTRADETAIL MINI] +[print:0.07mm ULTRADETAIL @MINI] inherits = *0.07mm*; *MINI* -alias = 0.07mm ULTRADETAIL +# alias = 0.07mm ULTRADETAIL fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 @@ -1132,9 +1156,9 @@ small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 -[print:0.10mm DETAIL MINI] +[print:0.10mm DETAIL @MINI] inherits = *0.10mm*; *MINI* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 @@ -1148,9 +1172,9 @@ fill_density = 15% perimeters = 3 bridge_acceleration = 800 -[print:0.15mm QUALITY MINI] +[print:0.15mm QUALITY @MINI] inherits = *0.15mm*; *MINI* -alias = 0.15mm QUALITY +# alias = 0.15mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 @@ -1162,9 +1186,9 @@ fill_pattern = gyroid fill_density = 15% bridge_flow_ratio = 0.85 -[print:0.15mm SPEED MINI] +[print:0.15mm SPEED @MINI] inherits = *0.15mm*; *MINI* -alias = 0.15mm SPEED +# alias = 0.15mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 @@ -1174,9 +1198,9 @@ solid_infill_speed = 140 top_solid_infill_speed = 40 bridge_flow_ratio = 0.85 -[print:0.20mm QUALITY MINI] +[print:0.20mm QUALITY @MINI] inherits = *0.20mm*; *MINI* -alias = 0.20mm QUALITY +# alias = 0.20mm QUALITY bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 @@ -1187,9 +1211,9 @@ top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% -[print:0.20mm SPEED MINI] +[print:0.20mm SPEED @MINI] inherits = *0.20mm*; *MINI* -alias = 0.20mm SPEED +# alias = 0.20mm SPEED bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 @@ -1199,33 +1223,34 @@ max_print_speed = 150 solid_infill_speed = 140 top_solid_infill_speed = 40 -[print:0.25mm DRAFT MINI] +[print:0.25mm DRAFT @MINI] inherits = *0.25mm*; *MINI* -alias = 0.25mm DRAFT +# alias = 0.25mm DRAFT bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 40 -infill_speed = 90 -perimeter_speed = 50 +infill_speed = 110 +perimeter_speed = 55 small_perimeter_speed = 25 -solid_infill_speed = 85 +solid_infill_speed = 100 top_solid_infill_speed = 45 first_layer_extrusion_width = 0.42 -infill_extrusion_width = 0.48 -solid_infill_extrusion_width = 0.48 +infill_extrusion_width = 0.45 +solid_infill_extrusion_width = 0.45 top_infill_extrusion_width = 0.4 # 0.25mm nozzle -[print:0.05mm ULTRADETAIL 0.25 nozzle MINI] + +[print:0.05mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.05mm*; *0.25nozzle*; *MINI* -alias = 0.05mm ULTRADETAIL +# alias = 0.05mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% -[print:0.07mm ULTRADETAIL 0.25 nozzle MINI] +[print:0.07mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.07mm*; *0.25nozzle*; *MINI* -alias = 0.07mm ULTRADETAIL +# alias = 0.07mm ULTRADETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 infill_speed = 30 solid_infill_speed = 30 @@ -1234,20 +1259,89 @@ top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% -[print:0.10mm DETAIL 0.25 nozzle MINI] +[print:0.10mm DETAIL @0.25 nozzle MINI] inherits = *0.10mm*; *0.25nozzleMINI*; *MINI* -alias = 0.10mm DETAIL +# alias = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% -[print:0.15mm QUALITY 0.25 nozzle MINI] +[print:0.15mm QUALITY @0.25 nozzle MINI] inherits = *0.15mm*; *0.25nozzleMINI*; *MINI* -alias = 0.15mm QUALITY +# alias = 0.15mm QUALITY compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% +# 0.6mm nozzle + +[print:0.15mm DETAIL @0.6 nozzle MINI] +inherits = *0.15mm*; *0.6nozzleMINI* +# alias = 0.15mm DETAIL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 + +[print:0.20mm DETAIL @0.6 nozzle MINI] +inherits = *0.20mm*; *0.6nozzleMINI* +# alias = 0.20mm DETAIL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 + +[print:0.30mm QUALITY @0.6 nozzle MINI] +inherits = *0.30mm*; *0.6nozzleMINI* +# alias = 0.30mm QUALITY +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 65 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 65 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 + +[print:0.35mm SPEED @0.6 nozzle MINI] +inherits = *0.35mm*; *0.6nozzleMINI* +# alias = 0.35mm SPEED +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 60 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 60 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 + +[print:0.40mm DRAFT @0.6 nozzle MINI] +inherits = *0.40mm*; *0.6nozzleMINI* +# alias = 0.40mm DRAFT +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_speed = 50 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 50 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 + # XXXXXXxxXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXxxXXXXXXXXXXXX @@ -1296,7 +1390,7 @@ first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 temperature = 210 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" [filament:*PET*] inherits = *common* @@ -1320,7 +1414,7 @@ compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI [filament:*PET06*] inherits = *PET* -compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_max_volumetric_speed = 15 [filament:*PETMMU1*] @@ -1339,7 +1433,18 @@ filament_retract_lift = nil filament_retract_before_travel = 1 filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="MINI" -start_filament_gcode = "M900 K0.2 ; Filament gcode" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode" + +[filament:*PETMINI06*] +inherits = *PET* +filament_retract_length = nil +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_retract_lift = nil +filament_retract_before_travel = 1 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6 +start_filament_gcode = "M900 K0.12 ; Filament gcode" +filament_max_volumetric_speed = 13 [filament:*ABSMINI*] inherits = *ABS* @@ -1352,25 +1457,28 @@ filament_retract_before_travel = 3 filament_wipe = 0 filament_max_volumetric_speed = 10 compatible_printers_condition = printer_model=="MINI" -start_filament_gcode = "M900 K0.2 ; Filament gcode" +start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode" [filament:*FLEXMINI*] inherits = *FLEX* -filament_retract_length = 6 +first_layer_temperature = 245 +temperature = 245 +filament_retract_length = 4 filament_retract_speed = 40 filament_deretract_speed = 15 filament_retract_lift = 0 filament_retract_before_travel = 7 filament_wipe = 0 -bridge_fan_speed = 70 +bridge_fan_speed = 80 fan_always_on = 1 cooling = 0 -max_fan_speed = 40 -min_fan_speed = 40 -filament_max_volumetric_speed = 1.6 +max_fan_speed = 50 +min_fan_speed = 50 +filament_max_volumetric_speed = 1.35 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" -disable_fan_first_layers = 3 -extrusion_multiplier = 1.2 +disable_fan_first_layers = 4 +extrusion_multiplier = 1.15 +filament_colour = #F2F200 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:*ABS*] @@ -1726,14 +1834,14 @@ filament_unload_time = 12 filament_loading_speed = 14 filament_unloading_speed = 20 -[filament:Generic ABS MMU2] +[filament:Generic ABS @MMU2] inherits = *ABS MMU2* -alias = Generic ABS +# alias = Generic ABS filament_vendor = Generic -[filament:Prusament ASA MMU2] +[filament:Prusament ASA @MMU2] inherits = *ABS MMU2* -alias = Prusament ASA +# alias = Prusament ASA filament_vendor = Prusa Polymers filament_cost = 35.28 filament_density = 1.07 @@ -1755,9 +1863,9 @@ filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}12{else}20{endif} ; Filament gcode" -[filament:Prusa ABS MMU2] +[filament:Prusa ABS @MMU2] inherits = *ABS MMU2* -alias = Prusa ABS +# alias = Prusa ABS filament_vendor = Prusa [filament:Prusa HIPS] @@ -1797,17 +1905,17 @@ filament_density = 1.27 filament_type = PETG compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) -[filament:Prusa PET 0.6 nozzle] +[filament:Prusa PET @0.6 nozzle] inherits = *PET06* -alias = Prusa PET +# alias = Prusa PET filament_vendor = Prusa filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG" -[filament:Prusament PETG 0.6 nozzle] +[filament:Prusament PETG @0.6 nozzle] inherits = *PET06* -alias = Prusament PETG +# alias = Prusament PETG filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 @@ -1839,36 +1947,36 @@ inherits = *PET MMU2* compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 13 -[filament:Generic PET MMU2] +[filament:Generic PET @MMU2] inherits = *PET MMU2* -alias = Generic PET +# alias = Generic PET filament_vendor = Generic -[filament:Prusa PET MMU2] +[filament:Prusa PET @MMU2] inherits = *PET MMU2* -alias = Prusa PET +# alias = Prusa PET filament_vendor = Prusa -[filament:Prusament PETG MMU2] +[filament:Prusament PETG @MMU2] inherits = *PET MMU2* filament_type = PETG -alias = Prusament PETG +# alias = Prusament PETG filament_vendor = Prusa Polymers -[filament:Generic PET MMU2 0.6 nozzle] +[filament:Generic PET @MMU2 0.6 nozzle] inherits = *PET MMU2 06* -alias = Generic PET +# alias = Generic PET filament_vendor = Generic -[filament:Prusa PET MMU2 0.6 nozzle] +[filament:Prusa PET @MMU2 0.6 nozzle] inherits = *PET MMU2 06* -alias = Prusa PET +# alias = Prusa PET filament_vendor = Prusa -[filament:Prusament PETG MMU2 0.6 nozzle] +[filament:Prusament PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* filament_type = PETG -alias = Prusament PETG +# alias = Prusament PETG filament_vendor = Prusa Polymers [filament:Prusa PLA] @@ -1902,19 +2010,16 @@ filament_loading_speed_start = 19 filament_minimal_purge_on_wipe_tower = 15 filament_unloading_speed_start = 100 -[filament:Generic PLA MMU2] +[filament:Generic PLA @MMU2] inherits = *PLA MMU2* -alias = Generic PLA filament_vendor = Generic -[filament:Prusa PLA MMU2] +[filament:Prusa PLA @MMU2] inherits = *PLA MMU2* -alias = Prusa PLA filament_vendor = Prusa -[filament:Prusament PLA MMU2] +[filament:Prusament PLA @MMU2] inherits = *PLA MMU2* -alias = Prusament PLA filament_vendor = Prusa Polymers [filament:SemiFlex or Flexfill 98A] @@ -1990,9 +2095,8 @@ min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode" temperature = 210 -[filament:Verbatim BVOH MMU2] +[filament:Verbatim BVOH @MMU2] inherits = Verbatim BVOH -alias = Verbatim BVOH filament_vendor = Verbatim compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 @@ -2011,9 +2115,8 @@ filament_unloading_speed = 20 filament_unloading_speed_start = 100 filament_loading_speed_start = 19 -[filament:PrimaSelect PVA+ MMU2] +[filament:PrimaSelect PVA+ @MMU2] inherits = *common* -alias = PrimaSelect PVA+ filament_vendor = PrimaSelect compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material bed_temperature = 60 @@ -2076,9 +2179,8 @@ temperature = 220 ## Filaments MMU1 -[filament:ColorFabb HT MMU1] +[filament:ColorFabb HT @MMU1] inherits = *PETMMU1* -alias = ColorFabb HT filament_vendor = ColorFabb bed_temperature = 110 bridge_fan_speed = 30 @@ -2095,9 +2197,8 @@ min_fan_speed = 10 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 -[filament:ColorFabb XT MMU1] +[filament:ColorFabb XT @MMU1] inherits = *PETMMU1* -alias = ColorFabb XT filament_vendor = ColorFabb filament_type = PETG filament_cost = 62.9 @@ -2106,9 +2207,9 @@ first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 -[filament:ColorFabb XT-CF20 MMU1] +[filament:ColorFabb XT-CF20 @MMU1] inherits = *PETMMU1* -alias = ColorFabb XT-CF20 +# alias = ColorFabb XT-CF20 filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MK2SMM" extrusion_multiplier = 1.2 @@ -2121,9 +2222,9 @@ first_layer_temperature = 260 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 -[filament:ColorFabb nGen MMU1] +[filament:ColorFabb nGen @MMU1] inherits = *PETMMU1* -alias = ColorFabb nGen +# alias = ColorFabb nGen filament_vendor = ColorFabb filament_cost = 21.2 filament_density = 1.2 @@ -2135,18 +2236,18 @@ first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 -[filament:E3D Edge MMU1] +[filament:E3D Edge @MMU1] inherits = *PETMMU1* -alias = E3D Edge +# alias = E3D Edge filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" -[filament:Fillamentum CPE MMU1] +[filament:Fillamentum CPE @MMU1] inherits = *PETMMU1* -alias = Fillamentum CPE +# alias = Fillamentum CPE filament_vendor = Fillamentum filament_cost = 54.1 filament_density = 1.25 @@ -2157,25 +2258,25 @@ max_fan_speed = 50 min_fan_speed = 50 temperature = 275 -[filament:Generic PET MMU1] +[filament:Generic PET @MMU1] inherits = *PETMMU1* -alias = Generic PET +# alias = Generic PET filament_vendor = Generic filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" -[filament:Prusa PET MMU1] +[filament:Prusa PET @MMU1] inherits = *PETMMU1* -alias = Prusa PET +# alias = Prusa PET filament_vendor = Prusa filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG" -[filament:Prusament PETG MMU1] +[filament:Prusament PETG @MMU1] inherits = *PETMMU1* -alias = Prusament PETG +# alias = Prusament PETG filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 @@ -2183,9 +2284,9 @@ filament_cost = 24.99 filament_density = 1.27 filament_type = PETG -[filament:Taulman T-Glase MMU1] +[filament:Taulman T-Glase @MMU1] inherits = *PETMMU1* -alias = Taulman T-Glase +# alias = Taulman T-Glase filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 @@ -2198,9 +2299,8 @@ max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -[filament:SemiFlex or Flexfill 98A MMU1] +[filament:SemiFlex or Flexfill 98A @MMU1] inherits = *FLEX* -alias = SemiFlex or Flexfill 98A filament_vendor = Generic filament_cost = 82 filament_density = 1.22 @@ -2210,9 +2310,9 @@ filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" -[filament:Generic FLEX MMU1] +[filament:Generic FLEX @MMU1] inherits = *FLEX* -alias = Generic FLEX +# alias = Generic FLEX filament_vendor = Generic filament_cost = 82 filament_density = 1.22 @@ -2224,21 +2324,35 @@ compatible_printers_condition = printer_model=="MK2SMM" ## Filaments MINI -[filament:Generic PET MINI] +[filament:Generic PET @MINI] inherits = Generic PET; *PETMINI* -alias = Generic PET +# alias = Generic PET +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 -[filament:Generic ABS MINI] +[filament:Generic ABS @MINI] inherits = Generic ABS; *ABSMINI* -alias = Generic ABS +# alias = Generic ABS -[filament:Prusament PETG MINI] +[filament:Prusament PETG @MINI] inherits = Prusament PETG; *PETMINI* -alias = Prusament PETG +# alias = Prusament PETG +first_layer_temperature = 240 +temperature = 250 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 -[filament:Prusament ASA MINI] +[filament:Prusament PETG @0.6 nozzle MINI] +inherits = Prusament PETG; *PETMINI06* +# alias = Prusament PETG +first_layer_temperature = 240 +temperature = 250 + +[filament:Generic PET @0.6 nozzle MINI] +inherits = Generic PET; *PETMINI06* +# alias = Generic PET + +[filament:Prusament ASA @MINI] inherits = Prusament ASA; *ABSMINI* -alias = Prusament ASA +# alias = Prusament ASA first_layer_temperature = 260 first_layer_bed_temperature = 100 temperature = 260 @@ -2253,40 +2367,110 @@ disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC -[filament:Fillamentum Flexfill 98A MINI] +[filament:Fillamentum Flexfill 98A @MINI] inherits = SemiFlex or Flexfill 98A; *FLEXMINI* -alias = Fillamentum Flexfill 98A +# alias = Fillamentum Flexfill 98A filament_vendor = Fillamentum -filament_max_volumetric_speed = 1.6 +filament_max_volumetric_speed = 1.35 -[filament:Fillamentum CPE MINI] +[filament:Semiflex or Flex 98A @MINI] +inherits = SemiFlex or Flexfill 98A; *FLEXMINI* +# alias = Semiflex or Flex 98A +filament_vendor = Generic +filament_max_volumetric_speed = 1.35 + +[filament:AmazonBasics TPU @MINI] +inherits = *FLEXMINI* +# alias = AmazonBasics TPU +filament_vendor = AmazonBasics +filament_max_volumetric_speed = 1.35 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 235 +bed_temperature = 50 +bridge_fan_speed = 80 +max_fan_speed = 60 +min_fan_speed = 60 +filament_retract_before_travel = 5 + +[filament:SainSmart TPU @MINI] +inherits = *FLEXMINI* +# alias = SainSmart TPU +filament_vendor = SainSmart +filament_max_volumetric_speed = 1.35 +first_layer_temperature = 235 +first_layer_bed_temperature = 50 +temperature = 235 +bed_temperature = 50 +bridge_fan_speed = 80 +max_fan_speed = 60 +min_fan_speed = 60 +filament_retract_before_travel = 5 + +[filament:Filatech FilaFlex40 TPU @MINI] +inherits = *FLEXMINI* +# alias = Filatech FilaFlex40 +filament_vendor = Filatech +filament_max_volumetric_speed = 1.35 +first_layer_temperature = 240 +first_layer_bed_temperature = 65 +temperature = 240 +bed_temperature = 65 +filament_retract_length = 6 +filament_retract_before_travel = 5 +bridge_fan_speed = 80 +max_fan_speed = 40 +min_fan_speed = 40 + +[filament:Fillamentum Flexfill 92A @MINI] +inherits = *FLEX* +# alias = Fillamentum Flexfill 92A +filament_vendor = Fillamentum +filament_retract_length = 3 +filament_retract_speed = 40 +filament_deretract_speed = 15 +filament_retract_lift = 0 +filament_retract_before_travel = 7 +filament_wipe = 0 +bridge_fan_speed = 70 +fan_always_on = 1 +cooling = 0 +max_fan_speed = 50 +min_fan_speed = 50 +filament_max_volumetric_speed = 1.2 +compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" +disable_fan_first_layers = 4 +extrusion_multiplier = 1.2 +start_filament_gcode = "M900 K0 ; Filament gcode" + +[filament:Fillamentum CPE @MINI] inherits = Fillamentum CPE; *PETMINI* -alias = Fillamentum CPE +# alias = Fillamentum CPE first_layer_temperature = 265 first_layer_bed_temperature = 90 temperature = 265 +filament_type = CPE -[filament:ColorFabb nGen MINI] +[filament:ColorFabb nGen @MINI] inherits = ColorFabb nGen; *PETMINI* -filament_type = NGEN -alias = ColorFabb nGen +# alias = ColorFabb nGen -[filament:ColorFabb nGen flex MINI] +[filament:ColorFabb nGen flex @MINI] inherits = ColorFabb nGen flex; *FLEXMINI* -alias = ColorFabb nGen flex +# alias = ColorFabb nGen flex filament_max_volumetric_speed = 4 -[filament:E3D PC-ABS MINI] +[filament:E3D PC-ABS @MINI] inherits = E3D PC-ABS; *ABSMINI* -alias = E3D PC-ABS +# alias = E3D PC-ABS -[filament:Fillamentum ABS MINI] +[filament:Fillamentum ABS @MINI] inherits = Fillamentum ABS; *ABSMINI* -alias = Fillamentum ABS +# alias = Fillamentum ABS -[filament:Fillamentum ASA MINI] +[filament:Fillamentum ASA @MINI] inherits = Fillamentum ASA; *ABSMINI* -alias = Fillamentum ASA +# alias = Fillamentum ASA first_layer_temperature = 255 first_layer_bed_temperature = 100 temperature = 255 @@ -2301,9 +2485,9 @@ disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC -[filament:Polymaker PC-Max MINI] +[filament:Polymaker PC-Max @MINI] inherits = Polymaker PC-Max; *ABSMINI* -alias = Polymaker PC-Max +# alias = Polymaker PC-Max filament_type = PC bed_temperature = 100 filament_colour = #3A80CA @@ -2312,14 +2496,14 @@ first_layer_temperature = 270 temperature = 270 bridge_fan_speed = 0 -[filament:Prusa ABS MINI] +[filament:Prusa ABS @MINI] inherits = *ABSMINI* -alias = Prusa ABS +# alias = Prusa ABS filament_vendor = Prusa -[filament:Generic HIPS MINI] +[filament:Generic HIPS @MINI] inherits = *ABSMINI* -alias = Generic HIPS +# alias = Generic HIPS filament_vendor = Generic filament_cost = 27.3 filament_density = 1.04 @@ -2334,12 +2518,11 @@ filament_type = HIPS first_layer_temperature = 230 max_fan_speed = 20 min_fan_speed = 20 -start_filament_gcode = "M900 K0.2 ; Filament gcode" temperature = 230 -[filament:ColorFabb HT MINI] +[filament:ColorFabb HT @MINI] inherits = *PETMINI* -alias = ColorFabb HT +# alias = ColorFabb HT filament_vendor = ColorFabb bed_temperature = 100 bridge_fan_speed = 30 @@ -2353,12 +2536,11 @@ first_layer_bed_temperature = 100 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 -start_filament_gcode = "M900 K0.2 ; Filament gcode" temperature = 270 -[filament:ColorFabb XT MINI] +[filament:ColorFabb XT @MINI] inherits = *PETMINI* -alias = ColorFabb XT +# alias = ColorFabb XT filament_vendor = ColorFabb filament_type = PETG filament_cost = 62.9 @@ -2367,9 +2549,9 @@ first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 -[filament:ColorFabb XT-CF20 MINI] +[filament:ColorFabb XT-CF20 @MINI] inherits = *PETMINI* -alias = ColorFabb XT-CF20 +# alias = ColorFabb XT-CF20 filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" extrusion_multiplier = 1.2 @@ -2379,12 +2561,11 @@ filament_colour = #804040 filament_max_volumetric_speed = 1 first_layer_bed_temperature = 90 first_layer_temperature = 260 -start_filament_gcode = "M900 K0.2 ; Filament gcode" temperature = 260 -[filament:Taulman T-Glase MINI] +[filament:Taulman T-Glase @MINI] inherits = *PETMINI* -alias = Taulman T-Glase +# alias = Taulman T-Glase filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 @@ -2395,19 +2576,26 @@ first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 -start_filament_gcode = "M900 K0.2 ; Filament gcode" -[filament:E3D Edge MINI] +[filament:E3D Edge @MINI] inherits = *PETMINI* -alias = E3D Edge +# alias = E3D Edge filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE -[filament:Prusa PET MINI] +[filament:Prusa PET @MINI] inherits = *PETMINI* -alias = Prusa PET +# alias = Prusa PET +filament_vendor = Prusa +filament_cost = 27.82 +filament_density = 1.27 +compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 + +[filament:Prusa PET @0.6 nozzle MINI] +inherits = *PETMINI06* +# alias = Prusa PET filament_vendor = Prusa filament_cost = 27.82 filament_density = 1.27 @@ -2493,77 +2681,77 @@ initial_layer_height = 0.1 ########### Materials 0.025 -[sla_material:3DM-ABS 0.025] +[sla_material:3DM-ABS @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM -[sla_material:3DM-Vulcan Gold 0.025] +[sla_material:3DM-Vulcan Gold @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM -[sla_material:BlueCast Phrozen Wax 0.025] +[sla_material:BlueCast Phrozen Wax @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast EcoGray 0.025] +[sla_material:BlueCast EcoGray @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 40 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast Kera Master Dental 0.025] +[sla_material:BlueCast Kera Master Dental @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 45 material_type = Dental material_vendor = BlueCast -[sla_material:BlueCast X10 0.025] +[sla_material:BlueCast X10 @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast -[sla_material:Esun Bio-Photopolymer Resin White 0.025] +[sla_material:Esun Bio-Photopolymer Resin White @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Esun -[sla_material:Esun Standard Resin Black 0.025] +[sla_material:Esun Standard Resin Black @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Esun -[sla_material:Photocentric Ash Grey 0.025] +[sla_material:Photocentric Ash Grey @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric -[sla_material:Resinworks 3D Violet 0.025] +[sla_material:Resinworks 3D Violet @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D -[sla_material:Resinworks 3D Green 0.025] +[sla_material:Resinworks 3D Green @0.025] inherits = *common 0.025* exposure_time = 17 initial_exposure_time = 30 @@ -2571,21 +2759,21 @@ material_type = Tough material_vendor = Resinworks 3D ## Prusa -[sla_material:Prusa Orange Tough 0.025] +[sla_material:Prusa Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Grey Tough 0.025] +[sla_material:Prusa Grey Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Azure Blue Tough 0.025] +[sla_material:Prusa Azure Blue Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 @@ -2593,96 +2781,96 @@ material_type = Tough material_vendor = Prusa -[sla_material:Prusa Maroon Tough 0.025] +[sla_material:Prusa Maroon Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Beige Tough 0.025] +[sla_material:Prusa Beige Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Pink Tough 0.025] +[sla_material:Prusa Pink Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa White Tough 0.025] +[sla_material:Prusa White Tough @0.025] inherits = *common 0.025* exposure_time = 6.5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Transparent Tough 0.025] +[sla_material:Prusa Transparent Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 15 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Green Dental Casting 0.025] +[sla_material:Prusa Green Dental Casting @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 40 material_type = Casting material_vendor = Prusa -[sla_material:Prusa Transparent Green Tough 0.025] +[sla_material:Prusa Transparent Green Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Clear ABS like 0.025] +[sla_material:Prusa Clear ABS like @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Prusa -## [sla_material:Prusa ABS like White 0.025] +## [sla_material:Prusa ABS like White @0.025] ## inherits = *common 0.025* ## exposure_time = 6 ## initial_exposure_time = 30 -[sla_material:Prusa Grey High Tenacity 0.025] +[sla_material:Prusa Grey High Tenacity @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Cyan Super Low Odor 0.025] +[sla_material:Prusa Cyan Super Low Odor @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Magenta Super Low Odor 0.025] +[sla_material:Prusa Magenta Super Low Odor @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Yellow Super Low Odor 0.025] +[sla_material:Prusa Yellow Super Low Odor @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Orange-Yellow Teeth Model 0.025] +[sla_material:Prusa Orange-Yellow Teeth Model @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 @@ -2692,217 +2880,217 @@ material_vendor = Prusa ########### Materials 0.05 -[sla_material:Asiga Denta Model 0.05] +[sla_material:Asiga Denta Model @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Dental material_vendor = Asiga -[sla_material:Ameralabs AMD 3 LED 0.05] +[sla_material:Ameralabs AMD 3 LED @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Ameralabs -[sla_material:BlueCast EcoGray 0.05] +[sla_material:BlueCast EcoGray @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast Kera Master Dental 0.05] +[sla_material:BlueCast Kera Master Dental @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 50 material_type = Dental material_vendor = BlueCast -[sla_material:BlueCast LCD-DLP Original 0.05] +[sla_material:BlueCast LCD-DLP Original @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 60 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast Phrozen Wax 0.05] +[sla_material:BlueCast Phrozen Wax @0.05] inherits = *common 0.05* exposure_time = 16 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast S+ 0.05] +[sla_material:BlueCast S+ @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 45 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast X5 0.05] +[sla_material:BlueCast X5 @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast X10 0.05] +[sla_material:BlueCast X10 @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast 23LS 0.05] +[sla_material:BlueCast 23LS @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast -[sla_material:Monocure 3D Black Rapid Resin 0.05] +[sla_material:Monocure 3D Black Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure -[sla_material:Monocure 3D Blue Rapid Resin 0.05] +[sla_material:Monocure 3D Blue Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure -[sla_material:Monocure 3D Clear Rapid Resin 0.05] +[sla_material:Monocure 3D Clear Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure -[sla_material:Monocure 3D Grey Rapid Resin 0.05] +[sla_material:Monocure 3D Grey Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Monocure -[sla_material:Monocure 3D White Rapid Resin 0.05] +[sla_material:Monocure 3D White Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure -[sla_material:3DM-HTR140 (high temperature) 0.05] +[sla_material:3DM-HTR140 (high temperature) @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 45 material_type = Tough material_vendor = Monocure -[sla_material:Esun Bio-Photopolymer Resin White 0.05] +[sla_material:Esun Bio-Photopolymer Resin White @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Esun -[sla_material:Esun Standard Resin Black 0.05] +[sla_material:Esun Standard Resin Black @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Esun -[sla_material:3DM-ABS 0.05] +[sla_material:3DM-ABS @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM -[sla_material:3DM-BLACK 0.05] +[sla_material:3DM-BLACK @0.05] inherits = *common 0.05* exposure_time = 20 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM -[sla_material:3DM-DENT 0.05] +[sla_material:3DM-DENT @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 45 material_type = Dental material_vendor = 3DM -[sla_material:3DM-HR Green 0.05] +[sla_material:3DM-HR Green @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM -[sla_material:3DM-HR Red Wine 0.05] +[sla_material:3DM-HR Red Wine @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM -[sla_material:3DM-XPRO White 0.05] +[sla_material:3DM-XPRO White @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM -[sla_material:3DM-Vulcan Gold 0.05] +[sla_material:3DM-Vulcan Gold @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM -[sla_material:FTD Ash Grey 0.05] +[sla_material:FTD Ash Grey @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 40 material_type = Tough material_vendor = FTD -[sla_material:Harz Labs Model Resin Cherry 0.05] +[sla_material:Harz Labs Model Resin Cherry @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 45 material_type = Tough material_vendor = Harz Labs -[sla_material:Resinworks 3D Violet 0.05] +[sla_material:Resinworks 3D Violet @0.05] inherits = *common 0.05* exposure_time = 17 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D -[sla_material:Resinworks 3D Green 0.05] +[sla_material:Resinworks 3D Green @0.05] inherits = *common 0.05* exposure_time = 21 initial_exposure_time = 35 material_type = Tough material_vendor = Resinworks 3D -[sla_material:Photocentric Hard Grey 0.05] +[sla_material:Photocentric Hard Grey @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric -[sla_material:Photocentric Ash Grey 0.05] +[sla_material:Photocentric Ash Grey @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 @@ -2911,205 +3099,205 @@ material_vendor = Photocentric ## Prusa -[sla_material:Prusa Beige Tough 0.05] +[sla_material:Prusa Beige Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Orange Tough 0.05] +[sla_material:Prusa Orange Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Grey Tough 0.05] +[sla_material:Prusa Grey Tough @0.05] inherits = *common 0.05* exposure_time = 8.5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Black Tough 0.05] +[sla_material:Prusa Black Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -## [sla_material:Prusa Beige Super Low Odor 0.05] +## [sla_material:Prusa Beige Super Low Odor @0.05] ## inherits = *common 0.05* ## exposure_time = 7.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Prusa -## [sla_material:Prusa White Super Low Odor 0.05] +## [sla_material:Prusa White Super Low Odor @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Prusa -## [sla_material:Prusa Grey Super Low Odor 0.05] +## [sla_material:Prusa Grey Super Low Odor @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Prusa -[sla_material:Prusa Cyan Super Low Odor 0.05] +[sla_material:Prusa Cyan Super Low Odor @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Magenta Super Low Odor 0.05] +[sla_material:Prusa Magenta Super Low Odor @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Yellow Super Low Odor 0.05] +[sla_material:Prusa Yellow Super Low Odor @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -## [sla_material:Prusa Black High Tenacity 0.05] +## [sla_material:Prusa Black High Tenacity @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Prusa -[sla_material:Prusa Orange-Yellow Teeth Model 0.05] +[sla_material:Prusa Orange-Yellow Teeth Model @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Green Dental Casting 0.05] +[sla_material:Prusa Green Dental Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 50 material_type = Casting material_vendor = Prusa -## [sla_material:Prusa Yellow Solid 0.05] +## [sla_material:Prusa Yellow Solid @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 -[sla_material:Prusa White Tough 0.05] +[sla_material:Prusa White Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Transparent Green Tough 0.05] +[sla_material:Prusa Transparent Green Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Transparent Red Tough 0.05] +[sla_material:Prusa Transparent Red Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Maroon Tough 0.05] +[sla_material:Prusa Maroon Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Pink Tough 0.05] +[sla_material:Prusa Pink Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Azure Blue Tough 0.05] +[sla_material:Prusa Azure Blue Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Transparent Tough 0.05] +[sla_material:Prusa Transparent Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 15 material_type = Tough material_vendor = Prusa -## [sla_material:Prusa Yellow Flexible 0.05] +## [sla_material:Prusa Yellow Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 -[sla_material:Prusa Clear Flexible 0.05] +[sla_material:Prusa Clear Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Prusa -## [sla_material:Prusa White Flexible 0.05] +## [sla_material:Prusa White Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 -[sla_material:Prusa Blue Flexible 0.05] +[sla_material:Prusa Blue Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Prusa -## [sla_material:Prusa Black Flexible 0.05] +## [sla_material:Prusa Black Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 -## [sla_material:Prusa Red Flexible 0.05] +## [sla_material:Prusa Red Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 -[sla_material:Prusa Clear ABS like 0.05] +[sla_material:Prusa Clear ABS like @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Prusa -## [sla_material:Prusa ABS like White 0.05] +## [sla_material:Prusa ABS like White @0.05] ## inherits = *common 0.05* ## exposure_time = 8 ## initial_exposure_time = 30 -[sla_material:Prusa Yellow Jewelry Casting 0.05] +[sla_material:Prusa Yellow Jewelry Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 45 material_type = Casting material_vendor = Prusa -[sla_material:Prusa Grey High Tenacity 0.05] +[sla_material:Prusa Grey High Tenacity @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 @@ -3118,7 +3306,7 @@ material_vendor = Prusa ########### Materials 0.035 -[sla_material:Prusa Orange Tough 0.035] +[sla_material:Prusa Orange Tough @0.035] inherits = *common 0.035* exposure_time = 6 initial_exposure_time = 35 @@ -3127,14 +3315,14 @@ material_vendor = Prusa ########### Materials 0.1 -[sla_material:BlueCast EcoGray 0.1] +[sla_material:BlueCast EcoGray @0.1] inherits = *common 0.1* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast -[sla_material:BlueCast Kera Master Dental 0.1] +[sla_material:BlueCast Kera Master Dental @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 50 @@ -3143,70 +3331,70 @@ material_vendor = BlueCast ## Prusa -[sla_material:Prusa Orange Tough 0.1] +[sla_material:Prusa Orange Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Beige Tough 0.1] +[sla_material:Prusa Beige Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Pink Tough 0.1] +[sla_material:Prusa Pink Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Azure Blue Tough 0.1] +[sla_material:Prusa Azure Blue Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Maroon Tough 0.1] +[sla_material:Prusa Maroon Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa White Tough 0.1] +[sla_material:Prusa White Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Black Tough 0.1] +[sla_material:Prusa Black Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 55 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Transparent Tough 0.1] +[sla_material:Prusa Transparent Tough @0.1] inherits = *common 0.1* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Prusa -[sla_material:Prusa Green Dental Casting 0.1] +[sla_material:Prusa Green Dental Casting @0.1] inherits = *common 0.1* exposure_time = 15 initial_exposure_time = 50 material_type = Casting material_vendor = Prusa -[sla_material:Prusa Transparent Green Tough 0.1] +[sla_material:Prusa Transparent Green Tough @0.1] inherits = *common 0.1* exposure_time = 7 initial_exposure_time = 35 @@ -3338,7 +3526,7 @@ max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX @@ -3353,7 +3541,7 @@ min_layer_height = 0.07 inherits = *mm-single* nozzle_diameter = 0.6 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 @@ -3367,7 +3555,7 @@ min_layer_height = 0.07 inherits = *mm-multi* nozzle_diameter = 0.6,0.6,0.6,0.6 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 @@ -3417,7 +3605,7 @@ machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 -default_print_profile = 0.15mm OPTIMAL MK2.5 +default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n @@ -3454,7 +3642,7 @@ machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 -default_print_profile = 0.15mm OPTIMAL MK2.5 +default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters @@ -3504,7 +3692,7 @@ machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 -default_print_profile = 0.15mm OPTIMAL MK2.5 +default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n @@ -3517,7 +3705,7 @@ max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -3553,7 +3741,7 @@ machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 -default_print_profile = 0.15mm OPTIMAL MK2.5 +default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters @@ -3570,7 +3758,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK2.5 MMU2 @@ -3578,7 +3766,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.20mm NORMAL 0.6 nozzle +default_print_profile = 0.20mm NORMAL @0.6 nozzle # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX @@ -3610,7 +3798,7 @@ retract_lift_below = 209 max_print_height = 210 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} printer_model = MK3 -default_print_profile = 0.15mm QUALITY MK3 +default_print_profile = 0.15mm QUALITY @MK3 [printer:Original Prusa i3 MK3 0.25 nozzle] inherits = Original Prusa i3 MK3 @@ -3620,7 +3808,7 @@ min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} -default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 @@ -3628,7 +3816,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S] inherits = Original Prusa i3 MK3 @@ -3654,8 +3842,8 @@ parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -13 printer_model = MK3MMU2 -default_print_profile = 0.15mm QUALITY MK3 -default_filament_profile = Prusament PLA MMU2 +default_print_profile = 0.15mm QUALITY @MK3 +default_filament_profile = Prusament PLA @MMU2 [printer:*mm2s*] inherits = Original Prusa i3 MK3 @@ -3666,8 +3854,8 @@ parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -25 printer_model = MK3SMMU2S -default_print_profile = 0.15mm QUALITY MK3 -default_filament_profile = Prusament PLA MMU2 +default_print_profile = 0.15mm QUALITY @MK3 +default_filament_profile = Prusament PLA @MMU2 [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* @@ -3683,7 +3871,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single @@ -3694,7 +3882,7 @@ min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n -default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* @@ -3721,7 +3909,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S MMU2S Single @@ -3732,7 +3920,7 @@ min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n -default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S] inherits = *mm2s* @@ -3750,7 +3938,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 @@ -3758,7 +3946,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 +default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## MINI @@ -3770,8 +3958,8 @@ printer_variant = 0.4 printer_vendor = thumbnails = 240x320,220x165,16x16 bed_shape = 0x0,180x0,180x180,0x180 -default_filament_profile = "Prusament PLA MINI" -default_print_profile = 0.15mm QUALITY MINI +default_filament_profile = "Prusament PLA" +default_print_profile = 0.15mm QUALITY @MINI gcode_flavor = marlin machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 1250 @@ -3814,6 +4002,7 @@ extruder_colour = inherits = Original Prusa MINI printer_variant = 0.25 nozzle_diameter = 0.25 +default_print_profile = 0.10mm DETAIL 0.25 nozzle MINI retract_length = 3 retract_lift = 0.15 retract_speed = 70 @@ -3823,6 +4012,19 @@ retract_before_wipe = 70% retract_before_travel = 1 start_gcode = M569 S0 E \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow +[printer:Original Prusa MINI 0.6 nozzle] +inherits = Original Prusa MINI +printer_variant = 0.6 +nozzle_diameter = 0.6 +default_print_profile = 0.30mm QUALITY 0.6 nozzle MINI +retract_length = 3.5 +retract_lift = 0.2 +retract_speed = 70 +deretract_speed = 40 +wipe = 1 +retract_before_wipe = 70% +retract_before_travel = 1 + [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1