diff --git a/resources/profiles/Snapmaker.idx b/resources/profiles/Snapmaker.idx new file mode 100644 index 000000000..03488b17c --- /dev/null +++ b/resources/profiles/Snapmaker.idx @@ -0,0 +1,2 @@ +min_slic3r_version = 2.4.1 +1.0.0 Initial Snapmaker bundle diff --git a/resources/profiles/Snapmaker.ini b/resources/profiles/Snapmaker.ini new file mode 100644 index 000000000..2643211b7 --- /dev/null +++ b/resources/profiles/Snapmaker.ini @@ -0,0 +1,473 @@ +# Snapmaker profiles + +# Based on the profiles from: https://github.com/nivekmai/snapmaker-prusa by nivekmai, WilliamBosacker, mrworf + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = Snapmaker +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the Slic3r configuration to be downgraded. +config_version = 1.0.0 +# Where to get the updates from? +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Snapmaker/ +# The printer models will be shown by the Configuration Wizard in this order, + +[printer_model:A250] +name = Snapmaker A250 +variants = 0.4 +technology = FFF +bed_model = A250_bed.stl +bed_texture = A250_texture.svg +default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker + +[printer_model:A350] +name = Snapmaker A350 +variants = 0.4 +technology = FFF +bed_model = A350_bed.stl +bed_texture = A350_texture.svg +default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker + +[print:*common*] +avoid_crossing_perimeters = 1 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_separation = 0 +brim_type = outer_only +brim_width = 0 +clip_multipart_objects = 1 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +draft_shield = disabled +elefant_foot_compensation = 0.1 +ensure_vertical_shell_thickness = 1 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 25 +extruder_clearance_radius = 75 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = gyroid +first_layer_acceleration = 0 +first_layer_acceleration_over_raft = 0 +first_layer_extrusion_width = 0.45 +first_layer_height = 0.2 +first_layer_speed = 15 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 +gap_fill_speed = 20 +gcode_comments = 0 +gcode_label_objects = 0 +gcode_resolution = 0.0125 +gcode_substitutions = +infill_acceleration = 0 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.25 +ironing_speed = 15 +ironing_type = top +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_speed = 0 +min_skirt_length = 4 +mmu_segmented_region_max_width = 0 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +overhangs = 0 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 1 +skirt_distance = 5 +skirt_height = 1 +skirts = 3 +slice_closing_radius = 0.049 +slicing_mode = regular +small_perimeter_speed = 25% +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 80% +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.38 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_pattern = rectilinear +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thick_bridges = 1 +thin_walls = 0 +threads = 8 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 60% +top_solid_layers = 4 +top_solid_min_thickness = 0 +travel_speed = 150 +travel_speed_z = 0 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 170 +wipe_tower_y = 140 +xy_size_compensation = 0 +compatible_printers_condition = nozzle_diameter[0]==0.4 + +[print:0.10mm HIGHDETAIL @SnapmakerA350] +inherits = *common* +layer_height = 0.1 +bottom_solid_layers = 7 +top_solid_layers = 8 +top_solid_min_thickness = 0.8 +bottom_solid_min_thickness = 0.8 +bridge_speed = 40 +infill_speed = 50 +perimeter_speed = 40 +support_material_speed = 40 +max_print_speed = 50 +skirt_distance = 10 +first_layer_speed = 25% +compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350" + +[print:0.16mm OPTIMAL @SnapmakerA350] +inherits = *common* +layer_height = 0.16 +top_solid_layers = 6 +bottom_solid_layers = 6 +first_layer_speed = 25% +max_print_speed = 60 +compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350" + +[print:0.20mm NORMAL @SnapmakerA350] +inherits = *common* +compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350" + +[print:0.20mm FAST @SnapmakerA350] +inherits = 0.20mm NORMAL @SnapmakerA350 +bridge_speed = 80 +gap_fill_speed = 30 +infill_speed = 120 +ironing_speed = 20 +perimeter_speed = 80 +support_material_speed = 80 +compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350" + +[print:0.08mm DETAIL @SnapmakerA250] +inherits = 0.20mm NORMAL @SnapmakerA250 +layer_height = 0.08 +infill_speed = 40 +external_perimeter_speed = 10 +perimeter_speed = 15 +top_solid_infill_speed = 20 +travel_speed = 70 +first_layer_extrusion_width = 0.45 +perimeter_extrusion_width = 0.4 +external_perimeter_extrusion_width = 0.4 +infill_extrusion_width = 0.4 +solid_infill_extrusion_width = 0.4 +top_infill_extrusion_width = 0.4 + +[print:0.20mm NORMAL @SnapmakerA250] +inherits = *common* +compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A250" +first_layer_speed = 15 +gap_fill_speed = 15 +infill_speed = 50 +perimeter_speed = 25 +small_perimeter_speed = 20 +external_perimeter_speed = 15 +support_material_speed = 25 +top_solid_infill_speed = 25 +travel_speed = 80 +max_print_speed = 80 +skirt_distance = 3 +min_skirt_length = 25 + +[print:0.24mm FAST @SnapmakerA250] +inherits = 0.20mm NORMAL @SnapmakerA250 +layer_height = 0.24 +infill_speed = 60 +external_perimeter_speed = 20 +top_solid_infill_speed = 30 + +[filament:*common*] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 0 +filament_density = 0 +filament_deretract_speed = nil +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = nil +filament_retract_layer_change = nil +filament_retract_length = nil +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = nil +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_wipe = nil +first_layer_bed_temperature = 60 +first_layer_temperature = 210 +full_fan_speed_layer = 0 +inherits = +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 210 + +[filament:*PLA*] +inherits = *common* + +[filament:*PETG*] +inherits = *common* +first_layer_bed_temperature = 80 +bed_temperature = 75 +first_layer_temperature = 245 +temperature = 245 +filament_density = 1.27 +disable_fan_first_layers = 3 +min_fan_speed = 20 +max_fan_speed = 50 +fan_below_layer_time = 20 +min_print_speed = 20 +filament_max_volumetric_speed = 8 +filament_type = PETG + +[filament:Generic PLA @Snapmaker] +inherits = *PLA* +filament_vendor = Generic + +[filament:Generic PETG @Snapmaker] +inherits = *PETG* +filament_vendor = Generic + +[filament:Snapmaker PLA @Snapmaker] +inherits = *PLA* +filament_vendor = Snapmaker + +[filament:Overture PLA @Snapmaker] +inherits = *PLA* +filament_vendor = Overture +bed_temperature = 50 +first_layer_temperature = 205 +temperature = 205 +filament_density = 1.24 +disable_fan_first_layers = 1 +min_fan_speed = 100 +max_fan_speed = 100 +full_fan_speed_layer = 3 +fan_below_layer_time = 100 +min_print_speed = 15 +filament_max_volumetric_speed = 0 + +[filament:MatterHackers Build Translucent @Snapmaker] +inherits = *PETG* +filament_vendor = MatterHackers + +[filament:MatterHackers Build White @Snapmaker] +inherits = MatterHackers Build Translucent @Snapmaker +bed_temperature = 65 +first_layer_bed_temperature = 70 +first_layer_temperature = 260 +temperature = 255 +filament_density = 1.28 +disable_fan_first_layers = 3 +full_fan_speed_layer = 5 +min_fan_speed = 40 +max_fan_speed = 100 +fan_below_layer_time = 60 +min_print_speed = 10 + +[filament:Overture TPU @Snapmaker] +inherits = *common* +filament_vendor = Overture +filament_type = FLEX +first_layer_temperature = 220 +temperature = 220 +filament_density = 1.22 +disable_fan_first_layers = 1 +min_fan_speed = 100 +max_fan_speed = 100 +fan_below_layer_time = 100 +min_print_speed = 15 +filament_retract_speed = 40 +filament_deretract_speed = 25 +filament_retract_length = 1.8 +filament_max_volumetric_speed = 3 + +# Common printer preset +[printer:*common*] +bed_shape = 0x0,320x0,320x350,0x350 +color_change_gcode = M600 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "" +default_print_profile = +end_gcode = ;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0 Y0 ; home\nM84 ;steppers off\nM107 ;fan off\nM82 ;absolute extrusion mode\n;End GCode end +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1000 +machine_max_acceleration_retracting = 1000 +machine_max_acceleration_travel = 1500 +machine_max_acceleration_x = 3000 +machine_max_acceleration_y = 3000 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 25 +machine_max_feedrate_x = 150 +machine_max_feedrate_y = 150 +machine_max_feedrate_z = 50 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +max_layer_height = 0.3 +max_print_height = 330 +min_layer_height = 0.08 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +pause_print_gcode = +printer_technology = FFF +remaining_times = 0 +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 3 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 328 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 60 +deretract_speed = 40 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start warming Bed\nM104 S[first_layer_temperature] ;Start warming Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E20 F200 ; Prime extrude for wipe\nG92 E0 +thumbnails = 16x16,220x124 +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 0 +z_offset = 0 + +[printer:Snapmaker A350] +inherits = *common* +printer_model = A350 +printer_variant = 0.4 +default_filament_profile = Generic PLA @Snapmaker +default_print_profile = 0.20mm NORMAL @SnapmakerA350 + +[printer:Snapmaker A250] +inherits = *common* +printer_model = A250 +printer_variant = 0.4 +bed_shape = 0x0,230x0,230x250,0x250 +thumbnails = +variable_layer_height = 0 +retract_lift_below = 0 +max_print_height = 235 +start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature] ;Start Warming Bed\nM104 S160 ;Preheat Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nG1 Z5 F5000 ; lift nozzle\nM190 S[first_layer_bed_temperature] ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E10 F200\nG1 E-2 F300\nG92 E0\n;Start GCode end\nG1 F3600 E-2 +end_gcode = M140 S0\n;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z330 E-1 F80 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y250 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;steppers off\n;End GCode end\nM82 ;absolute extrusion mode\nM104 S0\nM107\n;End of Gcode +default_filament_profile = Generic PLA @Snapmaker +default_print_profile = 0.20mm NORMAL @SnapmakerA250 \ No newline at end of file diff --git a/resources/profiles/Snapmaker/A250_bed.stl b/resources/profiles/Snapmaker/A250_bed.stl new file mode 100644 index 000000000..c783af9ac Binary files /dev/null and b/resources/profiles/Snapmaker/A250_bed.stl differ diff --git a/resources/profiles/Snapmaker/A250_texture.svg b/resources/profiles/Snapmaker/A250_texture.svg new file mode 100644 index 000000000..7f20598c3 --- /dev/null +++ b/resources/profiles/Snapmaker/A250_texture.svg @@ -0,0 +1,279 @@ + + + + + + + + + + image/svg+xml + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Snapmaker/A250_thumbnail.png b/resources/profiles/Snapmaker/A250_thumbnail.png new file mode 100644 index 000000000..ffc7619e6 Binary files /dev/null and b/resources/profiles/Snapmaker/A250_thumbnail.png differ diff --git a/resources/profiles/Snapmaker/A350_bed.stl b/resources/profiles/Snapmaker/A350_bed.stl new file mode 100644 index 000000000..ee418a68d Binary files /dev/null and b/resources/profiles/Snapmaker/A350_bed.stl differ diff --git a/resources/profiles/Snapmaker/A350_texture.svg b/resources/profiles/Snapmaker/A350_texture.svg new file mode 100644 index 000000000..8e8c47b65 --- /dev/null +++ b/resources/profiles/Snapmaker/A350_texture.svg @@ -0,0 +1,383 @@ + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Snapmaker/A350_thumbnail.png b/resources/profiles/Snapmaker/A350_thumbnail.png new file mode 100644 index 000000000..598039a83 Binary files /dev/null and b/resources/profiles/Snapmaker/A350_thumbnail.png differ