diff --git a/resources/localization/ko/PrusaSlicer.mo b/resources/localization/ko/PrusaSlicer.mo index cfb41c850..a1c7f8756 100644 Binary files a/resources/localization/ko/PrusaSlicer.mo and b/resources/localization/ko/PrusaSlicer.mo differ diff --git a/resources/localization/ko/PrusaSlicer_ko_KR.po b/resources/localization/ko/PrusaSlicer_ko_KR.po index f16c5e1ff..cd5e0fb4e 100644 --- a/resources/localization/ko/PrusaSlicer_ko_KR.po +++ b/resources/localization/ko/PrusaSlicer_ko_KR.po @@ -93,7 +93,7 @@ msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84 #, boost-format msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" -msgstr "슬라이서에 치명적인 오류가 발생했습니다" +msgstr "슬라이서에 치명적인 오류가 발생했습니다: \"%1%\"" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" diff --git a/resources/localization/nl/PrusaSlicer.mo b/resources/localization/nl/PrusaSlicer.mo index 097521c94..2d12b74c6 100644 Binary files a/resources/localization/nl/PrusaSlicer.mo and b/resources/localization/nl/PrusaSlicer.mo differ diff --git a/resources/localization/nl/PrusaSlicer_nl.po b/resources/localization/nl/PrusaSlicer_nl.po index 47911b32a..ccce8f9a2 100644 --- a/resources/localization/nl/PrusaSlicer_nl.po +++ b/resources/localization/nl/PrusaSlicer_nl.po @@ -1,18 +1,22 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-09-05 15:33+0200\n" -"PO-Revision-Date: 2021-12-14 09:56+0100\n" +"POT-Creation-Date: 2022-08-12 10:25+0200\n" +"PO-Revision-Date: 2022-09-27 15:39+0200\n" "Last-Translator: \n" "Language-Team: \n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 3.0\n" -"X-Poedit-Basepath: .\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: Poedit 3.1.1\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:305 msgid "Portions copyright" @@ -20,7 +24,7 @@ msgstr "Gedeeltelijk auteursrecht" #: src/slic3r/GUI/AboutDialog.cpp:141 src/slic3r/GUI/AboutDialog.cpp:269 msgid "Copyright" -msgstr "Copyright" +msgstr "Auteursrecht" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:143 @@ -79,14 +83,14 @@ msgid "" "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" -"Fout in %s. Mogelijk komt dit door een tekort aan RAM geheugen. Als u er " -"zeker van bent genoeg RAM geheugen te hebben, kan dit een andere oorzaak " -"hebben. We stellen het op prijs als u het aan ons rapporteert." +"%s heeft een fout opgelopen. Mogelijk komt dit door een tekort aan RAM " +"geheugen. Als u zeker weet genoeg RAM geheugen te hebben, kan dit een andere " +"oorzaak hebben. We stellen het op prijs als u het aan ons rapporteert." #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84 #, boost-format msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" -msgstr "" +msgstr "PrusaSlicer heeft een fatale fout opgelopen: \"%1%\"" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" @@ -142,7 +146,7 @@ msgstr "Uitvoeren van nabewerkingsscripts" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710 msgid "Unknown error occured during exporting G-code." -msgstr "Onbekende error opgetreden tijdens exporteren van de G-code." +msgstr "Onbekende fout opgetreden tijdens exporteren van de G-code." #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695 #, boost-format @@ -196,11 +200,11 @@ msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715 #, boost-format msgid "G-code file exported to %1%" -msgstr "G-code-bestand geëxporteerd naar %1%" +msgstr ".gcode-bestand geëxporteerd naar %1%" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729 msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Fout bij het exporteren naar de output-G-code" +msgstr "Fout bij het exporteren naar output-G-code" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751 #, boost-format @@ -251,36 +255,36 @@ msgstr "" #: src/libslic3r/PrintConfig.cpp:628 src/libslic3r/PrintConfig.cpp:678 #: src/libslic3r/PrintConfig.cpp:809 src/libslic3r/PrintConfig.cpp:820 #: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:1019 -#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1298 -#: src/libslic3r/PrintConfig.cpp:1308 src/libslic3r/PrintConfig.cpp:1588 -#: src/libslic3r/PrintConfig.cpp:1782 src/libslic3r/PrintConfig.cpp:1843 -#: src/libslic3r/PrintConfig.cpp:1861 src/libslic3r/PrintConfig.cpp:1879 -#: src/libslic3r/PrintConfig.cpp:1942 src/libslic3r/PrintConfig.cpp:1952 -#: src/libslic3r/PrintConfig.cpp:2066 src/libslic3r/PrintConfig.cpp:2075 -#: src/libslic3r/PrintConfig.cpp:2094 src/libslic3r/PrintConfig.cpp:2115 -#: src/libslic3r/PrintConfig.cpp:2127 src/libslic3r/PrintConfig.cpp:2135 -#: src/libslic3r/PrintConfig.cpp:2176 src/libslic3r/PrintConfig.cpp:2184 -#: src/libslic3r/PrintConfig.cpp:2194 src/libslic3r/PrintConfig.cpp:2202 -#: src/libslic3r/PrintConfig.cpp:2210 src/libslic3r/PrintConfig.cpp:2272 -#: src/libslic3r/PrintConfig.cpp:2502 src/libslic3r/PrintConfig.cpp:2572 -#: src/libslic3r/PrintConfig.cpp:2589 src/libslic3r/PrintConfig.cpp:2690 -#: src/libslic3r/PrintConfig.cpp:2699 src/libslic3r/PrintConfig.cpp:2749 -#: src/libslic3r/PrintConfig.cpp:2901 src/libslic3r/PrintConfig.cpp:2989 -#: src/libslic3r/PrintConfig.cpp:2996 src/libslic3r/PrintConfig.cpp:3003 -#: src/libslic3r/PrintConfig.cpp:3017 src/libslic3r/PrintConfig.cpp:3041 -#: src/libslic3r/PrintConfig.cpp:3051 src/libslic3r/PrintConfig.cpp:3061 -#: src/libslic3r/PrintConfig.cpp:3341 src/libslic3r/PrintConfig.cpp:3382 -#: src/libslic3r/PrintConfig.cpp:3542 src/libslic3r/PrintConfig.cpp:3551 -#: src/libslic3r/PrintConfig.cpp:3560 src/libslic3r/PrintConfig.cpp:3570 -#: src/libslic3r/PrintConfig.cpp:3635 src/libslic3r/PrintConfig.cpp:3645 -#: src/libslic3r/PrintConfig.cpp:3657 src/libslic3r/PrintConfig.cpp:3677 -#: src/libslic3r/PrintConfig.cpp:3687 src/libslic3r/PrintConfig.cpp:3697 -#: src/libslic3r/PrintConfig.cpp:3715 src/libslic3r/PrintConfig.cpp:3730 -#: src/libslic3r/PrintConfig.cpp:3744 src/libslic3r/PrintConfig.cpp:3755 -#: src/libslic3r/PrintConfig.cpp:3768 src/libslic3r/PrintConfig.cpp:3813 -#: src/libslic3r/PrintConfig.cpp:3823 src/libslic3r/PrintConfig.cpp:3832 -#: src/libslic3r/PrintConfig.cpp:3842 src/libslic3r/PrintConfig.cpp:3858 -#: src/libslic3r/PrintConfig.cpp:3882 +#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1297 +#: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1587 +#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:1842 +#: src/libslic3r/PrintConfig.cpp:1860 src/libslic3r/PrintConfig.cpp:1878 +#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1951 +#: src/libslic3r/PrintConfig.cpp:2065 src/libslic3r/PrintConfig.cpp:2074 +#: src/libslic3r/PrintConfig.cpp:2093 src/libslic3r/PrintConfig.cpp:2114 +#: src/libslic3r/PrintConfig.cpp:2126 src/libslic3r/PrintConfig.cpp:2134 +#: src/libslic3r/PrintConfig.cpp:2175 src/libslic3r/PrintConfig.cpp:2183 +#: src/libslic3r/PrintConfig.cpp:2193 src/libslic3r/PrintConfig.cpp:2201 +#: src/libslic3r/PrintConfig.cpp:2209 src/libslic3r/PrintConfig.cpp:2271 +#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2571 +#: src/libslic3r/PrintConfig.cpp:2588 src/libslic3r/PrintConfig.cpp:2689 +#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2748 +#: src/libslic3r/PrintConfig.cpp:2900 src/libslic3r/PrintConfig.cpp:2988 +#: src/libslic3r/PrintConfig.cpp:2995 src/libslic3r/PrintConfig.cpp:3002 +#: src/libslic3r/PrintConfig.cpp:3016 src/libslic3r/PrintConfig.cpp:3040 +#: src/libslic3r/PrintConfig.cpp:3050 src/libslic3r/PrintConfig.cpp:3060 +#: src/libslic3r/PrintConfig.cpp:3340 src/libslic3r/PrintConfig.cpp:3381 +#: src/libslic3r/PrintConfig.cpp:3541 src/libslic3r/PrintConfig.cpp:3550 +#: src/libslic3r/PrintConfig.cpp:3559 src/libslic3r/PrintConfig.cpp:3569 +#: src/libslic3r/PrintConfig.cpp:3634 src/libslic3r/PrintConfig.cpp:3644 +#: src/libslic3r/PrintConfig.cpp:3656 src/libslic3r/PrintConfig.cpp:3676 +#: src/libslic3r/PrintConfig.cpp:3686 src/libslic3r/PrintConfig.cpp:3696 +#: src/libslic3r/PrintConfig.cpp:3714 src/libslic3r/PrintConfig.cpp:3729 +#: src/libslic3r/PrintConfig.cpp:3743 src/libslic3r/PrintConfig.cpp:3754 +#: src/libslic3r/PrintConfig.cpp:3767 src/libslic3r/PrintConfig.cpp:3812 +#: src/libslic3r/PrintConfig.cpp:3822 src/libslic3r/PrintConfig.cpp:3831 +#: src/libslic3r/PrintConfig.cpp:3841 src/libslic3r/PrintConfig.cpp:3857 +#: src/libslic3r/PrintConfig.cpp:3881 msgid "mm" msgstr "mm" @@ -342,7 +346,7 @@ msgstr "Model" #: src/slic3r/GUI/BedShapeDialog.cpp:508 msgid "Choose an STL file to import bed shape from:" -msgstr "Kies een STL-bestand om te importeren als bedvorm:" +msgstr "Kies een .STL-bestand om te importeren als bedvorm:" #: src/slic3r/GUI/BedShapeDialog.cpp:514 src/slic3r/GUI/BedShapeDialog.cpp:562 #: src/slic3r/GUI/BedShapeDialog.cpp:584 @@ -370,7 +374,7 @@ msgstr "Kies een bestand om te importeren als bedtextuur (PNG/SVG):" #: src/slic3r/GUI/BedShapeDialog.cpp:574 msgid "Choose an STL file to import bed model from:" -msgstr "Kies een STL-bestand om te importeren als bedvorm:" +msgstr "Kies een .STL-bestand om te importeren als bedvorm:" #: src/slic3r/GUI/BedShapeDialog.hpp:95 src/slic3r/GUI/ConfigWizard.cpp:1396 msgid "Bed Shape" @@ -402,7 +406,7 @@ msgstr "Zoeken naar apparaten" #: src/slic3r/GUI/BonjourDialog.cpp:231 msgid "Finished" -msgstr "Klaar" +msgstr "Gereed" #: src/slic3r/GUI/ButtonsDescription.cpp:42 msgid "Revert color to default" @@ -450,7 +454,7 @@ msgstr "" "\n" "De laagdikte wordt ingesteld op 0,01." -#: src/slic3r/GUI/ConfigManipulation.cpp:62 src/libslic3r/PrintConfig.cpp:1227 +#: src/slic3r/GUI/ConfigManipulation.cpp:62 src/libslic3r/PrintConfig.cpp:1226 msgid "First layer height" msgstr "Laagdikte eerste laag" @@ -515,7 +519,7 @@ msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:145 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" -"Moeten de supportlagen gesynchroniseerd worden met de overage lagen om het " +"Moeten de supportlagen gesynchroniseerd worden met de overige lagen om het " "afveegblok te activeren?" #: src/slic3r/GUI/ConfigManipulation.cpp:164 @@ -549,11 +553,11 @@ msgstr "Moet dit aangepast worden naar het rechtlijnig patroon?" #: src/slic3r/GUI/Plater.cpp:460 src/slic3r/GUI/Tab.cpp:1503 #: src/slic3r/GUI/Tab.cpp:1505 src/libslic3r/PrintConfig.cpp:474 #: src/libslic3r/PrintConfig.cpp:715 src/libslic3r/PrintConfig.cpp:739 -#: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:1108 -#: src/libslic3r/PrintConfig.cpp:1145 src/libslic3r/PrintConfig.cpp:1394 -#: src/libslic3r/PrintConfig.cpp:1404 src/libslic3r/PrintConfig.cpp:1473 -#: src/libslic3r/PrintConfig.cpp:1493 src/libslic3r/PrintConfig.cpp:1512 -#: src/libslic3r/PrintConfig.cpp:2333 src/libslic3r/PrintConfig.cpp:2350 +#: src/libslic3r/PrintConfig.cpp:1093 src/libslic3r/PrintConfig.cpp:1107 +#: src/libslic3r/PrintConfig.cpp:1144 src/libslic3r/PrintConfig.cpp:1393 +#: src/libslic3r/PrintConfig.cpp:1403 src/libslic3r/PrintConfig.cpp:1472 +#: src/libslic3r/PrintConfig.cpp:1492 src/libslic3r/PrintConfig.cpp:1511 +#: src/libslic3r/PrintConfig.cpp:2332 src/libslic3r/PrintConfig.cpp:2349 msgid "Infill" msgstr "Vulling" @@ -651,7 +655,7 @@ msgstr "varianten" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93 #, c-format, boost-format msgid "Incompatible with this %s" -msgstr "Niet geschikt voor deze %s" +msgstr "Niet compatibel met deze %s" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96 msgid "Activate" @@ -686,7 +690,7 @@ msgstr "Alles" #: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652 #: src/slic3r/GUI/DoubleSlider.cpp:2030 src/slic3r/GUI/Plater.cpp:432 #: src/slic3r/GUI/Plater.cpp:579 src/slic3r/GUI/Preferences.cpp:436 -#: src/libslic3r/PrintConfig.cpp:1287 +#: src/libslic3r/PrintConfig.cpp:1286 msgid "None" msgstr "Geen" @@ -715,15 +719,15 @@ msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:495 msgid "Remove user profiles (a snapshot will be taken beforehand)" -msgstr "Verwijder gebruikersprofielen (vooraf wordt een opname gemaakt)" +msgstr "Verwijder gebruikersprofielen (vooraf wordt een snapshot gemaakt)" #: src/slic3r/GUI/ConfigWizard.cpp:498 msgid "" "Perform desktop integration (Sets this binary to be searchable by the " "system)." msgstr "" -"Voer desktopintegratie uit (stel in op binary om zodat deze door het systeem " -"bezocht kan worden)." +"Voer desktopintegratie uit (stel in op binair zodat deze door het systeem " +"gezocht kan worden)." #: src/slic3r/GUI/ConfigWizard.cpp:550 #, c-format, boost-format @@ -826,7 +830,7 @@ msgid "" "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" -"%s controleert op nieuwe versie online als dit is geactiveerd. Als een " +"%s controleert naar nieuwe versies online als dit is ingeschakeld. Als een " "nieuwe versie beschikbaar komt, wordt bij de volgende keer opstarten een " "melding getoond (nooit tijdens gebruik). Dit is slechts een melding." @@ -842,8 +846,8 @@ msgid "" "When a new preset version becomes available it is offered at application " "startup." msgstr "" -"%s download updates op ingebouwde presets in de achtergrond als dit is " -"geactiveerd. De updates worden in een tijdelijke locatie opgeslagen. Wanneer " +"Als dit aanstaat download %s updates op ingebouwde presets in de " +"achtergrond. De updates worden in een tijdelijke locatie opgeslagen. Wanneer " "een nieuwe preset beschikbaar komt, wordt een melding getoond tijdens het " "opstarten." @@ -864,7 +868,7 @@ msgstr "" "update wordt toegepast." #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726 -#: src/slic3r/GUI/Plater.cpp:3582 +#: src/slic3r/GUI/Plater.cpp:3569 msgid "Reload from disk" msgstr "Herlaad van schijf" @@ -872,7 +876,8 @@ msgstr "Herlaad van schijf" msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" -"Exporteer volledige padnaam van modellen en bronnen in 3MF en AMF bestanden" +"Exporteer volledige padnaam van modellen en bronnen in .3MF- en .AMF-" +"bestanden" #: src/slic3r/GUI/ConfigWizard.cpp:1250 msgid "" @@ -882,7 +887,7 @@ msgid "" "using an open file dialog." msgstr "" "Sta toe om bestanden automatisch te vinden bij het herladen van de schijf " -"als dit is geactiveerd.\n" +"als dit is ingeschakeld.\n" "Als dit niet is geactiveerd vraagt het programma elke bestand apart te " "selecteren." @@ -892,11 +897,11 @@ msgstr "Bestandsassociatie" #: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:157 msgid "Associate .3mf files to PrusaSlicer" -msgstr "Open .3mf-bestanden met PrusaSlicer" +msgstr "Open .3MF-bestanden met PrusaSlicer" #: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:164 msgid "Associate .stl files to PrusaSlicer" -msgstr "Open .stl-bestanden met PrusaSlicer" +msgstr "Open .STL-bestanden met PrusaSlicer" #: src/slic3r/GUI/ConfigWizard.cpp:1272 msgid "View mode" @@ -1024,8 +1029,8 @@ msgid "Extrusion Temperature:" msgstr "Extrusietemperatuur:" #: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582 -#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:1207 -#: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:2811 +#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:1206 +#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:2810 msgid "°C" msgstr "°C" @@ -1158,15 +1163,15 @@ msgstr "Select alle standaardprinters" #: src/slic3r/GUI/ConfigWizard.cpp:2861 msgid "< &Back" -msgstr "< &Terug" +msgstr "< Terug" #: src/slic3r/GUI/ConfigWizard.cpp:2862 msgid "&Next >" -msgstr "&Volgende >" +msgstr "Volgende >" #: src/slic3r/GUI/ConfigWizard.cpp:2863 msgid "&Finish" -msgstr "&Voltooi" +msgstr "Voltooi" #: src/slic3r/GUI/ConfigWizard.cpp:2864 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490 @@ -1191,7 +1196,7 @@ msgid "Filament Profiles Selection" msgstr "Filament profielselectie" #: src/slic3r/GUI/ConfigWizard.cpp:2912 src/slic3r/GUI/ConfigWizard.cpp:2915 -#: src/slic3r/GUI/GUI_ObjectList.cpp:3790 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3781 msgid "Type:" msgstr "Type:" @@ -1205,7 +1210,7 @@ msgstr "Configuratie-assistent" #: src/slic3r/GUI/ConfigWizard.cpp:3037 msgid "Configuration &Assistant" -msgstr "Configuratie-&assistent" +msgstr "Configuratie-assistent" #: src/slic3r/GUI/ConfigWizard.cpp:3039 msgid "Configuration Wizard" @@ -1213,7 +1218,7 @@ msgstr "Configuratie-assistent" #: src/slic3r/GUI/ConfigWizard.cpp:3040 msgid "Configuration &Wizard" -msgstr "Configuratie-&assistent" +msgstr "Configuratie-assistent" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232 msgid "" @@ -1245,7 +1250,7 @@ msgstr "" "aangemaakt." #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459 -#: src/slic3r/GUI/GUI_App.cpp:2245 +#: src/slic3r/GUI/GUI_App.cpp:2244 msgid "Desktop Integration" msgstr "Desktopintegratie" @@ -1671,7 +1676,7 @@ msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:538 #: src/slic3r/GUI/GUI_ObjectList.cpp:550 src/slic3r/GUI/GUI_ObjectList.cpp:979 #: src/slic3r/GUI/GUI_ObjectList.cpp:1966 -#: src/slic3r/GUI/GUI_ObjectList.cpp:4291 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4282 #: src/slic3r/GUI/ObjectDataViewModel.cpp:250 #: src/slic3r/GUI/ObjectDataViewModel.cpp:352 #: src/slic3r/GUI/ObjectDataViewModel.cpp:376 @@ -1688,10 +1693,10 @@ msgid "Set extruder change for every" msgstr "Stel toolwissel in voor elke" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60 -#: src/libslic3r/PrintConfig.cpp:661 src/libslic3r/PrintConfig.cpp:1407 -#: src/libslic3r/PrintConfig.cpp:2104 src/libslic3r/PrintConfig.cpp:2279 -#: src/libslic3r/PrintConfig.cpp:2355 src/libslic3r/PrintConfig.cpp:2608 -#: src/libslic3r/PrintConfig.cpp:2656 src/libslic3r/PrintConfig.cpp:2675 +#: src/libslic3r/PrintConfig.cpp:661 src/libslic3r/PrintConfig.cpp:1406 +#: src/libslic3r/PrintConfig.cpp:2103 src/libslic3r/PrintConfig.cpp:2278 +#: src/libslic3r/PrintConfig.cpp:2354 src/libslic3r/PrintConfig.cpp:2607 +#: src/libslic3r/PrintConfig.cpp:2655 src/libslic3r/PrintConfig.cpp:2674 msgid "layers" msgstr "lagen" @@ -1703,7 +1708,7 @@ msgstr "Willekeurige volgorde" msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" "Willekeurige volgorde van de geselecteerde extruders wordt toegestaan als " -"dit aan staat." +"dit is ingeschakeld." #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172 msgid "Allow next color repetition" @@ -1712,8 +1717,8 @@ msgstr "Sta volgende kleur volgorde toe" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174 msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" -"Een herhaling van de volgende willekeurige kleur wordt toegestaan als dit " -"aan staat." +"Een herhaling van de volgende willekeurige kleur wordt toegestaan als dit is " +"ingeschakeld." #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177 msgid "Set extruder(tool) sequence" @@ -1867,7 +1872,7 @@ msgstr "Firmwarebestand:" #: src/slic3r/GUI/FirmwareDialog.cpp:813 msgid "Select a file" -msgstr "" +msgstr "Selecteer een bestand" #: src/slic3r/GUI/FirmwareDialog.cpp:815 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297 @@ -1951,7 +1956,7 @@ msgstr "Voeg toe" msgid "Add one or more custom shapes" msgstr "Voeg een of meer aangepaste vormen toe" -#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:506 +#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:508 #: src/slic3r/GUI/GLCanvas3D.cpp:4490 src/slic3r/GUI/GUI_Factories.cpp:444 #: src/slic3r/GUI/Tab.cpp:3748 msgid "Delete" @@ -1963,11 +1968,11 @@ msgstr "" "Verwijder een of meer aangepaste vormen. U kunt geen standaardvormen " "verwijderen" -#: src/slic3r/GUI/GalleryDialog.cpp:400 +#: src/slic3r/GUI/GalleryDialog.cpp:402 msgid "Choose one or more files (STL, OBJ):" msgstr "Kies een of meer bestanden (STL, OBJ):" -#: src/slic3r/GUI/GalleryDialog.cpp:440 +#: src/slic3r/GUI/GalleryDialog.cpp:442 #, boost-format msgid "" "It looks like selected %1%-file has an error or is destructed.\n" @@ -1977,19 +1982,19 @@ msgstr "" "vernietigd.\n" "Het bestand kan niet geladen worden" -#: src/slic3r/GUI/GalleryDialog.cpp:451 +#: src/slic3r/GUI/GalleryDialog.cpp:453 msgid "Choose one PNG file:" msgstr "Kies een PNG-bestand:" -#: src/slic3r/GUI/GalleryDialog.cpp:464 +#: src/slic3r/GUI/GalleryDialog.cpp:466 msgid "Replacing of the PNG" msgstr "Herplaats de PNG" -#: src/slic3r/GUI/GalleryDialog.cpp:508 +#: src/slic3r/GUI/GalleryDialog.cpp:510 msgid "Change thumbnail" msgstr "Verander miniatuur" -#: src/slic3r/GUI/GalleryDialog.cpp:549 src/slic3r/GUI/GalleryDialog.cpp:554 +#: src/slic3r/GUI/GalleryDialog.cpp:551 src/slic3r/GUI/GalleryDialog.cpp:556 #, boost-format msgid "Loading of the \"%1%\"" msgstr "Laden van de \"%1%\"" @@ -2127,7 +2132,7 @@ msgid "Duration" msgstr "Duur" #: src/slic3r/GUI/GCodeViewer.cpp:3609 src/slic3r/GUI/GUI_Preview.cpp:1049 -#: src/libslic3r/PrintConfig.cpp:2906 +#: src/libslic3r/PrintConfig.cpp:2905 msgid "Travel" msgstr "Beweging" @@ -2211,9 +2216,9 @@ msgstr "Normale modus" msgid "Stealth mode" msgstr "Stille modus" -#: src/slic3r/GUI/GCodeViewer.cpp:3766 src/libslic3r/PrintConfig.cpp:1185 -#: src/libslic3r/PrintConfig.cpp:1203 src/libslic3r/PrintConfig.cpp:1213 -#: src/libslic3r/PrintConfig.cpp:1258 +#: src/slic3r/GUI/GCodeViewer.cpp:3766 src/libslic3r/PrintConfig.cpp:1184 +#: src/libslic3r/PrintConfig.cpp:1202 src/libslic3r/PrintConfig.cpp:1212 +#: src/libslic3r/PrintConfig.cpp:1257 msgid "First layer" msgstr "Eerste laag" @@ -2320,7 +2325,7 @@ msgstr "Variabele laagdikte - adaptief" #: src/slic3r/GUI/GLCanvas3D.cpp:1281 msgid "Variable layer height - Smooth all" -msgstr "Variable laagdikte - egaliseer alles" +msgstr "Variabele laagdikte - egaliseer alles" #: src/slic3r/GUI/GLCanvas3D.cpp:1688 msgid "Mirror Object" @@ -2419,7 +2424,7 @@ msgid "Add..." msgstr "Voeg toe..." #: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/KBShortcutsDialog.cpp:96 -#: src/slic3r/GUI/Plater.cpp:5509 src/slic3r/GUI/Tab.cpp:4155 +#: src/slic3r/GUI/Plater.cpp:5496 src/slic3r/GUI/Tab.cpp:4155 msgid "Delete all" msgstr "Verwijder alles" @@ -2508,7 +2513,7 @@ msgid "Selection-Remove from rectangle" msgstr "Selectie - Verwijder van boxselectie" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50 -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4447 +#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4446 msgid "Cut" msgstr "Snij door" @@ -2624,7 +2629,7 @@ msgstr "Bol" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68 -#: src/libslic3r/PrintConfig.cpp:1168 +#: src/libslic3r/PrintConfig.cpp:1167 msgid "Triangles" msgstr "Facetten" @@ -2770,7 +2775,7 @@ msgid "Quality" msgstr "Kwaliteit" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34 -#: src/libslic3r/PrintConfig.cpp:3874 +#: src/libslic3r/PrintConfig.cpp:3873 msgid "Closing distance" msgstr "Sluitafstand" @@ -2877,7 +2882,7 @@ msgstr "Verplaats" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 -#: src/libslic3r/PrintConfig.cpp:4501 +#: src/libslic3r/PrintConfig.cpp:4500 msgid "Rotate" msgstr "Roteer" @@ -2894,7 +2899,7 @@ msgstr "Toepassen" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579 -#: src/libslic3r/PrintConfig.cpp:4516 +#: src/libslic3r/PrintConfig.cpp:4515 msgid "Scale" msgstr "Verschaal" @@ -3033,7 +3038,7 @@ msgid "Minimal points distance" msgstr "Minimale puntafstand" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 -#: src/libslic3r/PrintConfig.cpp:3704 +#: src/libslic3r/PrintConfig.cpp:3703 msgid "Support points density" msgstr "Dichtheid van supportpunten" @@ -3310,7 +3315,7 @@ msgstr "Afsluiten, ik zal mijn data nu verplaatsen" msgid "Start the application" msgstr "Start het programma" -#: src/slic3r/GUI/GUI_App.cpp:699 +#: src/slic3r/GUI/GUI_App.cpp:698 #, c-format, boost-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " @@ -3319,17 +3324,17 @@ msgid "" "\n" "The application will now terminate." msgstr "" -"%s veroorzaakte een fout. Dit komt mogelijk door een geheugentekort. Als u " -"zeker weet dat u genoeg RAM-geheugen heeft, kan dit ook een andere fout " +"%s heeft een fout opgelopen. Dit komt mogelijk door een geheugentekort. Als " +"u zeker weet genoeg RAM geheugen te hebben, kan dit ook een andere fout " "zijn. We waarderen het als u dit meldt.\n" "\n" "Het programma zal nu afsluiten." -#: src/slic3r/GUI/GUI_App.cpp:702 +#: src/slic3r/GUI/GUI_App.cpp:701 msgid "Fatal error" msgstr "Fatale fout" -#: src/slic3r/GUI/GUI_App.cpp:706 +#: src/slic3r/GUI/GUI_App.cpp:705 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " @@ -3337,22 +3342,22 @@ msgid "" "\n" "The application will now terminate." msgstr "" -"PrusaSlicer is een vertalingsprobleem tegengekomen. Gelieve te melden bij " -"het PrusaSlicer team; welke taal actief is en in welk scenario dit gebeurde. " -"Hartelijk dank.\n" +"PrusaSlicer heeft een vertalingsprobleem opgelopen. We zouden het waarderen " +"als u dit meldt bij het PrusaSlicer team; welke taal actief is en in welk " +"scenario dit gebeurde. Hartelijk dank.\n" "\n" "Het programma zal nu sluiten." -#: src/slic3r/GUI/GUI_App.cpp:709 +#: src/slic3r/GUI/GUI_App.cpp:708 msgid "Critical error" msgstr "Kritische fout" -#: src/slic3r/GUI/GUI_App.cpp:714 +#: src/slic3r/GUI/GUI_App.cpp:713 #, boost-format msgid "Internal error: %1%" msgstr "Interne fout: %1%" -#: src/slic3r/GUI/GUI_App.cpp:909 src/slic3r/GUI/GUI_App.cpp:1007 +#: src/slic3r/GUI/GUI_App.cpp:908 src/slic3r/GUI/GUI_App.cpp:1006 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " @@ -3362,7 +3367,7 @@ msgstr "" "Probeer het bestand handmatig te verwijderen om de fout te herstellen. Uw " "gebruikersprofielen worden niet beïnvloed." -#: src/slic3r/GUI/GUI_App.cpp:915 src/slic3r/GUI/GUI_App.cpp:1013 +#: src/slic3r/GUI/GUI_App.cpp:914 src/slic3r/GUI/GUI_App.cpp:1012 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." @@ -3370,12 +3375,12 @@ msgstr "" "Fout tijdens het lezen van PrusaGCodeViewer-configuratiebestand. Het is " "mogelijk beschadigd. Probeer het handmatig te verwijderen." -#: src/slic3r/GUI/GUI_App.cpp:962 +#: src/slic3r/GUI/GUI_App.cpp:961 #, boost-format msgid "You are opening %1% version %2%." msgstr "U opent %1%, versie %2%." -#: src/slic3r/GUI/GUI_App.cpp:965 +#: src/slic3r/GUI/GUI_App.cpp:964 #, boost-format msgid "" "The active configuration was created by %1% %2%,\n" @@ -3394,7 +3399,7 @@ msgstr "" "In dat geval wordt uw actieve configuratie opgeslagen voor het importeren " "van de nieuwe configuratie." -#: src/slic3r/GUI/GUI_App.cpp:973 +#: src/slic3r/GUI/GUI_App.cpp:972 #, boost-format msgid "" "An existing configuration was found in %3%\n" @@ -3403,22 +3408,22 @@ msgid "" "Shall this configuration be imported?" msgstr "" "Een bestaande configuratie is gevonden in %3%,\n" -"aangemaakt door %1% %2%.\n" +"aangemaakt door b>%1% %2%.\n" "Moet de nieuwe configuratie worden geïmporteerd?" -#: src/slic3r/GUI/GUI_App.cpp:981 +#: src/slic3r/GUI/GUI_App.cpp:980 msgid "Import" msgstr "Importeer" -#: src/slic3r/GUI/GUI_App.cpp:982 +#: src/slic3r/GUI/GUI_App.cpp:981 msgid "Don't import" msgstr "Niet importeren" -#: src/slic3r/GUI/GUI_App.cpp:990 +#: src/slic3r/GUI/GUI_App.cpp:989 msgid "Continue and import newer configuration?" -msgstr "" +msgstr "Doorgaan en nieuwere configuraties importeren?" -#: src/slic3r/GUI/GUI_App.cpp:1051 +#: src/slic3r/GUI/GUI_App.cpp:1050 msgid "" "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n" "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM " @@ -3434,7 +3439,7 @@ msgstr "" "https://www.prusa3d.com/prusaslicer/.\n" "Wilt u doorgaan?" -#: src/slic3r/GUI/GUI_App.cpp:1134 +#: src/slic3r/GUI/GUI_App.cpp:1133 #, c-format, boost-format msgid "" "%s\n" @@ -3443,46 +3448,46 @@ msgstr "" "%s\n" "Wilt u doorgaan?" -#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3101 +#: src/slic3r/GUI/GUI_App.cpp:1135 src/slic3r/GUI/GUI_App.cpp:3100 #: src/slic3r/GUI/Plater.cpp:1726 src/slic3r/GUI/UnsavedChangesDialog.cpp:889 msgid "Remember my choice" msgstr "Onthoud mijn keuze" -#: src/slic3r/GUI/GUI_App.cpp:1178 +#: src/slic3r/GUI/GUI_App.cpp:1177 msgid "Loading configuration" -msgstr "" +msgstr "Configuratie aan het laden" -#: src/slic3r/GUI/GUI_App.cpp:1209 +#: src/slic3r/GUI/GUI_App.cpp:1208 #, boost-format msgid "New release version %1% is available." msgstr "Nieuwe release versie %1% is beschikbaar." -#: src/slic3r/GUI/GUI_App.cpp:1210 +#: src/slic3r/GUI/GUI_App.cpp:1209 msgid "See Download page." msgstr "Zie downloadpagina." -#: src/slic3r/GUI/GUI_App.cpp:1224 +#: src/slic3r/GUI/GUI_App.cpp:1223 #, boost-format msgid "New prerelease version %1% is available." msgstr "Nieuwe pre-release versie %1% is beschikbaar." -#: src/slic3r/GUI/GUI_App.cpp:1225 +#: src/slic3r/GUI/GUI_App.cpp:1224 msgid "See Releases page." msgstr "Zie Release-pagina." -#: src/slic3r/GUI/GUI_App.cpp:1262 +#: src/slic3r/GUI/GUI_App.cpp:1261 msgid "Preparing settings tabs" msgstr "Instellingentab voorbereiden" -#: src/slic3r/GUI/GUI_App.cpp:1336 src/slic3r/GUI/Preferences.cpp:287 +#: src/slic3r/GUI/GUI_App.cpp:1335 src/slic3r/GUI/Preferences.cpp:287 msgid "Restore window position on start" -msgstr "" +msgstr "Herstel vensterpositie na opstarten" + +#: src/slic3r/GUI/GUI_App.cpp:1337 +msgid "PrusaSlicer started after a crash" +msgstr "PrusaSlicer is opgestart na een crash" #: src/slic3r/GUI/GUI_App.cpp:1338 -msgid "PrusaSlicer started after a crash" -msgstr "" - -#: src/slic3r/GUI/GUI_App.cpp:1339 #, boost-format msgid "" "PrusaSlicer crashed last time when attempting to set window position.\n" @@ -3494,24 +3499,34 @@ msgid "" "To avoid this problem, consider disabling \"%4%\" in \"Preferences\". " "Otherwise, the application will most likely crash again next time." msgstr "" +"PrusaSlicer is de vorige keer gecrasht tijdens een poging om de " +"vensterpositie in te stellen.\n" +"Sorry voor het ongemak. Het gebeurt helaas met sommige meer-schermen " +"opstellingen.\n" +"Exacte reden van de crash: \"%1%\".\n" +"For meer informatie, zie onze Github probleemtracker: \"%2%\" en \"%3%\"\n" +"\n" +"Overweeg om \"%4%\" in voorkeuren uit te zetten om dit probleem te " +"voorkomen. Waarschijnlijk zal anders het programma de volgende keer weer " +"crashen." + +#: src/slic3r/GUI/GUI_App.cpp:1350 +#, boost-format +msgid "Disable \"%1%\"" +msgstr "\"%1%\" uitschakelen" #: src/slic3r/GUI/GUI_App.cpp:1351 #, boost-format -msgid "Disable \"%1%\"" -msgstr "" - -#: src/slic3r/GUI/GUI_App.cpp:1352 -#, boost-format msgid "Leave \"%1%\" enabled" -msgstr "" +msgstr "Laat \"%1%\" aanstaan" -#: src/slic3r/GUI/GUI_App.cpp:1679 +#: src/slic3r/GUI/GUI_App.cpp:1678 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" "Je hebt de volgende presets opgeslagen voor de printhost-uploadwachtrij" -#: src/slic3r/GUI/GUI_App.cpp:1683 +#: src/slic3r/GUI/GUI_App.cpp:1682 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" @@ -3519,9 +3534,9 @@ msgid "" msgstr "" "Maar sinds deze versie van PrusaSlicer, wordt de informatie niet meer " "getoond in de printerinstellingen.\n" -"Instellingen zijn beschikbaar in de fysieke printerinstellingen." +"Instellingen zijn beschikbaar in de fysieke-printerinstellingen." -#: src/slic3r/GUI/GUI_App.cpp:1685 +#: src/slic3r/GUI/GUI_App.cpp:1684 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" @@ -3531,138 +3546,138 @@ msgstr "" "Let op: deze naam kan later worden aangepast in de fysieke-" "printerinstellingen" -#: src/slic3r/GUI/GUI_App.cpp:1689 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722 +#: src/slic3r/GUI/GUI_App.cpp:1688 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722 msgid "Information" msgstr "Informatie" -#: src/slic3r/GUI/GUI_App.cpp:1702 src/slic3r/GUI/GUI_App.cpp:1713 +#: src/slic3r/GUI/GUI_App.cpp:1701 src/slic3r/GUI/GUI_App.cpp:1712 msgid "Recreating" msgstr "Opnieuw aanmaken" -#: src/slic3r/GUI/GUI_App.cpp:1716 +#: src/slic3r/GUI/GUI_App.cpp:1715 msgid "Loading of current presets" msgstr "Laden van huidige presets" -#: src/slic3r/GUI/GUI_App.cpp:1721 +#: src/slic3r/GUI/GUI_App.cpp:1720 msgid "Loading of a mode view" msgstr "Laden van de weergavemodus" -#: src/slic3r/GUI/GUI_App.cpp:1859 +#: src/slic3r/GUI/GUI_App.cpp:1858 msgid "Choose one file (3MF/AMF):" -msgstr "Kies een 3MF- of AMF-bestand:" +msgstr "Kies een .3MF- of .AMF-bestand:" -#: src/slic3r/GUI/GUI_App.cpp:1871 -msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):" -msgstr "Kies één of meer STL-, 3MF-, STEP-, OBJ-, AMF- of PRUSA- bestanden:" +#: src/slic3r/GUI/GUI_App.cpp:1870 +msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" +msgstr "Kies één of meer .STL-, .OBJ-, .AMF-, .3MF-, of .PRUSA-bestanden:" -#: src/slic3r/GUI/GUI_App.cpp:1883 +#: src/slic3r/GUI/GUI_App.cpp:1882 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" -msgstr "Kies een bestand (gcode/.GCO/.G/.ngc/NGC):" +msgstr "Kies een bestand (.gcode/.GCO/.G/.ngc):" -#: src/slic3r/GUI/GUI_App.cpp:1894 +#: src/slic3r/GUI/GUI_App.cpp:1893 msgid "Changing of an application language" msgstr "Veranderen van de taal van het programma" -#: src/slic3r/GUI/GUI_App.cpp:2033 +#: src/slic3r/GUI/GUI_App.cpp:2032 msgid "Select the language" msgstr "Taalselectie" -#: src/slic3r/GUI/GUI_App.cpp:2033 +#: src/slic3r/GUI/GUI_App.cpp:2032 msgid "Language" msgstr "Wijzig taal (change language)" -#: src/slic3r/GUI/GUI_App.cpp:2182 +#: src/slic3r/GUI/GUI_App.cpp:2181 msgid "modified" msgstr "aangepast" -#: src/slic3r/GUI/GUI_App.cpp:2236 +#: src/slic3r/GUI/GUI_App.cpp:2235 #, c-format, boost-format msgid "Run %s" msgstr "Voer %s uit" -#: src/slic3r/GUI/GUI_App.cpp:2240 +#: src/slic3r/GUI/GUI_App.cpp:2239 msgid "&Configuration Snapshots" msgstr "Configuratiesnapshots" -#: src/slic3r/GUI/GUI_App.cpp:2240 +#: src/slic3r/GUI/GUI_App.cpp:2239 msgid "Inspect / activate configuration snapshots" msgstr "Inspecteer/activeer configuratiesnapshots" -#: src/slic3r/GUI/GUI_App.cpp:2241 +#: src/slic3r/GUI/GUI_App.cpp:2240 msgid "Take Configuration &Snapshot" msgstr "Neem configuratiesnapshot" -#: src/slic3r/GUI/GUI_App.cpp:2241 +#: src/slic3r/GUI/GUI_App.cpp:2240 msgid "Capture a configuration snapshot" msgstr "Neem een configuratiesnapshot op" -#: src/slic3r/GUI/GUI_App.cpp:2242 +#: src/slic3r/GUI/GUI_App.cpp:2241 msgid "Check for Configuration Updates" msgstr "Controleer op configuratie-updates" -#: src/slic3r/GUI/GUI_App.cpp:2242 +#: src/slic3r/GUI/GUI_App.cpp:2241 msgid "Check for configuration updates" msgstr "Controleer op configuratie-updates" -#: src/slic3r/GUI/GUI_App.cpp:2249 +#: src/slic3r/GUI/GUI_App.cpp:2248 msgid "&Preferences" msgstr "Voorkeuren" -#: src/slic3r/GUI/GUI_App.cpp:2255 +#: src/slic3r/GUI/GUI_App.cpp:2254 msgid "Application preferences" msgstr "Programmavoorkeuren" -#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:708 +#: src/slic3r/GUI/GUI_App.cpp:2259 src/slic3r/GUI/wxExtensions.cpp:708 msgid "Simple" msgstr "Eenvoudig" -#: src/slic3r/GUI/GUI_App.cpp:2260 +#: src/slic3r/GUI/GUI_App.cpp:2259 msgid "Simple View Mode" msgstr "Eenvoudige weergave" -#: src/slic3r/GUI/GUI_App.cpp:2262 src/slic3r/GUI/wxExtensions.cpp:710 +#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:710 msgctxt "Mode" msgid "Advanced" msgstr "Geavanceerd" -#: src/slic3r/GUI/GUI_App.cpp:2262 +#: src/slic3r/GUI/GUI_App.cpp:2261 msgid "Advanced View Mode" msgstr "Geavanceerde weergave" -#: src/slic3r/GUI/GUI_App.cpp:2263 src/slic3r/GUI/wxExtensions.cpp:711 +#: src/slic3r/GUI/GUI_App.cpp:2262 src/slic3r/GUI/wxExtensions.cpp:711 msgid "Expert" msgstr "Expert" -#: src/slic3r/GUI/GUI_App.cpp:2263 +#: src/slic3r/GUI/GUI_App.cpp:2262 msgid "Expert View Mode" msgstr "Expertweergave" -#: src/slic3r/GUI/GUI_App.cpp:2268 +#: src/slic3r/GUI/GUI_App.cpp:2267 msgid "Mode" msgstr "Modus" -#: src/slic3r/GUI/GUI_App.cpp:2268 +#: src/slic3r/GUI/GUI_App.cpp:2267 #, c-format, boost-format msgid "%s View Mode" msgstr "%s-weergavemodus" -#: src/slic3r/GUI/GUI_App.cpp:2271 +#: src/slic3r/GUI/GUI_App.cpp:2270 msgid "&Language" msgstr "Wijzig taal (change language)" -#: src/slic3r/GUI/GUI_App.cpp:2274 +#: src/slic3r/GUI/GUI_App.cpp:2273 msgid "Flash Printer &Firmware" msgstr "Flash printer firmware" -#: src/slic3r/GUI/GUI_App.cpp:2274 +#: src/slic3r/GUI/GUI_App.cpp:2273 msgid "Upload a firmware image into an Arduino based printer" msgstr "Upload een firmwarebestand op een Arduino-gebaseerde printer" -#: src/slic3r/GUI/GUI_App.cpp:2294 +#: src/slic3r/GUI/GUI_App.cpp:2293 msgid "Taking a configuration snapshot" msgstr "Neemt een configuratiesnapshot" -#: src/slic3r/GUI/GUI_App.cpp:2295 +#: src/slic3r/GUI/GUI_App.cpp:2294 msgid "" "Some presets are modified and the unsaved changes will not be captured by " "the configuration snapshot." @@ -3670,32 +3685,32 @@ msgstr "" "Sommige presets zijn aangepast en onopgeslagen instellingen worden niet " "meegenomen bij de configuratiesnapshot." -#: src/slic3r/GUI/GUI_App.cpp:2296 +#: src/slic3r/GUI/GUI_App.cpp:2295 msgid "Snapshot name" msgstr "Snapshotnaam" -#: src/slic3r/GUI/GUI_App.cpp:2312 +#: src/slic3r/GUI/GUI_App.cpp:2311 msgid "Loading a configuration snapshot" msgstr "Laad een configuratiesnapshot" -#: src/slic3r/GUI/GUI_App.cpp:2321 +#: src/slic3r/GUI/GUI_App.cpp:2320 #, boost-format msgid "Continue to activate a configuration snapshot %1%?" msgstr "Doorgaan om configuratiesnapshot %1% te activeren?" -#: src/slic3r/GUI/GUI_App.cpp:2335 +#: src/slic3r/GUI/GUI_App.cpp:2334 msgid "Failed to activate configuration snapshot." msgstr "Activeren van configuratiesnapshot mislukt." -#: src/slic3r/GUI/GUI_App.cpp:2354 +#: src/slic3r/GUI/GUI_App.cpp:2353 msgid "Restart application" msgstr "Herstart programma" -#: src/slic3r/GUI/GUI_App.cpp:2388 +#: src/slic3r/GUI/GUI_App.cpp:2387 msgid "Language selection" msgstr "Taalselectie" -#: src/slic3r/GUI/GUI_App.cpp:2391 +#: src/slic3r/GUI/GUI_App.cpp:2390 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." @@ -3703,89 +3718,89 @@ msgstr "" "Het veranderen van de taal zorgt dat het programma opnieuw opstart.\n" "U verliest de geladen inhoud zoals getoond in de modelweergave." -#: src/slic3r/GUI/GUI_App.cpp:2393 src/slic3r/GUI/Preferences.cpp:582 +#: src/slic3r/GUI/GUI_App.cpp:2392 src/slic3r/GUI/Preferences.cpp:582 msgid "Do you want to proceed?" msgstr "" "Weet u zeker dat u door wilt gaan?\n" "Do you want to proceed?" -#: src/slic3r/GUI/GUI_App.cpp:2420 +#: src/slic3r/GUI/GUI_App.cpp:2419 msgid "&Configuration" msgstr "Configuratie" -#: src/slic3r/GUI/GUI_App.cpp:2534 src/slic3r/GUI/GUI_App.cpp:2595 +#: src/slic3r/GUI/GUI_App.cpp:2533 src/slic3r/GUI/GUI_App.cpp:2594 msgid "The preset modifications are successfully saved" msgid_plural "The presets modifications are successfully saved" msgstr[0] "De preset-aanpassing is succesvol opgeslagen" msgstr[1] "De presets-aanpassing is succesvol opgeslagen" -#: src/slic3r/GUI/GUI_App.cpp:2598 +#: src/slic3r/GUI/GUI_App.cpp:2597 msgid "For new project all modifications will be reseted" msgstr "Voor nieuwe projecten worden alle aanpassingen gereset" -#: src/slic3r/GUI/GUI_App.cpp:2636 +#: src/slic3r/GUI/GUI_App.cpp:2635 msgid "Loading a new project while the current project is modified." msgstr "Laad een nieuw project terwijl het huidige project is aangepast." -#: src/slic3r/GUI/GUI_App.cpp:2639 +#: src/slic3r/GUI/GUI_App.cpp:2638 msgid "Project is loading" msgstr "Project is aan het laden" -#: src/slic3r/GUI/GUI_App.cpp:2639 +#: src/slic3r/GUI/GUI_App.cpp:2638 msgid "Opening new project while some presets are unsaved." msgstr "Openen van nieuw project terwijl sommige presets niet opgeslagen zijn." -#: src/slic3r/GUI/GUI_App.cpp:2658 +#: src/slic3r/GUI/GUI_App.cpp:2657 msgid "The uploads are still ongoing" msgstr "De uploads zijn nog bezig" -#: src/slic3r/GUI/GUI_App.cpp:2658 +#: src/slic3r/GUI/GUI_App.cpp:2657 msgid "Stop them and continue anyway?" msgstr "Stop ze en ga toch door?" -#: src/slic3r/GUI/GUI_App.cpp:2662 +#: src/slic3r/GUI/GUI_App.cpp:2661 msgid "Ongoing uploads" msgstr "Lopende uploads" -#: src/slic3r/GUI/GUI_App.cpp:2876 +#: src/slic3r/GUI/GUI_App.cpp:2875 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" "Het is niet mogelijk meerdelige objecten te printen met de SLA-technologie." -#: src/slic3r/GUI/GUI_App.cpp:2877 src/slic3r/GUI/Jobs/SLAImportJob.cpp:235 -#: src/slic3r/GUI/Plater.cpp:2459 +#: src/slic3r/GUI/GUI_App.cpp:2876 src/slic3r/GUI/Jobs/SLAImportJob.cpp:235 +#: src/slic3r/GUI/Plater.cpp:2448 msgid "Please check your object list before preset changing." msgstr "Controleer de objectenlijst voor het wijzigen van de preset." -#: src/slic3r/GUI/GUI_App.cpp:2901 +#: src/slic3r/GUI/GUI_App.cpp:2900 msgid "Configuration is editing from ConfigWizard" msgstr "Configuratie is aangepast van de configuratiewizard" -#: src/slic3r/GUI/GUI_App.cpp:2926 +#: src/slic3r/GUI/GUI_App.cpp:2925 msgid "Select a gcode file:" -msgstr "Selecteer een gcode-bestand:" +msgstr "Selecteer een .gcode-bestand:" -#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/GUI_App.cpp:3123 +#: src/slic3r/GUI/GUI_App.cpp:3099 src/slic3r/GUI/GUI_App.cpp:3122 msgid "Open hyperlink in default browser?" msgstr "Open hyperlinks in de standaardbrowser?" -#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/GUI_App.cpp:3123 +#: src/slic3r/GUI/GUI_App.cpp:3099 src/slic3r/GUI/GUI_App.cpp:3122 msgid "PrusaSlicer: Open hyperlink" msgstr "PrusaSlicer: Open hyperlink" -#: src/slic3r/GUI/GUI_App.cpp:3105 src/slic3r/GUI/Preferences.cpp:382 +#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Preferences.cpp:382 msgid "Suppress to open hyperlink in browser" msgstr "Hyperlinks openen in browser uitzetten" -#: src/slic3r/GUI/GUI_App.cpp:3107 src/slic3r/GUI/Plater.cpp:1732 +#: src/slic3r/GUI/GUI_App.cpp:3106 src/slic3r/GUI/Plater.cpp:1732 msgid "PrusaSlicer will remember your choice." msgstr "PrusaSlicer onthoudt uw keuze." -#: src/slic3r/GUI/GUI_App.cpp:3108 +#: src/slic3r/GUI/GUI_App.cpp:3107 msgid "You will not be asked about it again on hyperlinks hovering." -msgstr "" +msgstr "U wordt niet opnieuw gevraagd over het bewegen over hyperlinks." -#: src/slic3r/GUI/GUI_App.cpp:3109 src/slic3r/GUI/Plater.cpp:1736 +#: src/slic3r/GUI/GUI_App.cpp:3108 src/slic3r/GUI/Plater.cpp:1736 #, boost-format msgid "" "Visit \"Preferences\" and check \"%1%\"\n" @@ -3794,7 +3809,7 @@ msgstr "" "Ga naar Voorkeuren en controleer \"%1%\"\n" "om uw keuze te wijzigen." -#: src/slic3r/GUI/GUI_App.cpp:3111 src/slic3r/GUI/Plater.cpp:1738 +#: src/slic3r/GUI/GUI_App.cpp:3110 src/slic3r/GUI/Plater.cpp:1738 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:906 msgid "PrusaSlicer: Don't ask me again" msgstr "PrusaSlicer: vraag het niet nogmaals" @@ -3812,12 +3827,12 @@ msgstr "Fatale fout, uitzondering gevonden: %1%" #: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:403 #: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:455 #: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:774 -#: src/libslic3r/PrintConfig.cpp:782 src/libslic3r/PrintConfig.cpp:1228 -#: src/libslic3r/PrintConfig.cpp:1315 src/libslic3r/PrintConfig.cpp:1540 -#: src/libslic3r/PrintConfig.cpp:1932 src/libslic3r/PrintConfig.cpp:1999 -#: src/libslic3r/PrintConfig.cpp:2233 src/libslic3r/PrintConfig.cpp:2819 -#: src/libslic3r/PrintConfig.cpp:2827 src/libslic3r/PrintConfig.cpp:2887 -#: src/libslic3r/PrintConfig.cpp:2896 src/libslic3r/PrintConfig.cpp:3067 +#: src/libslic3r/PrintConfig.cpp:782 src/libslic3r/PrintConfig.cpp:1227 +#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1539 +#: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:1998 +#: src/libslic3r/PrintConfig.cpp:2232 src/libslic3r/PrintConfig.cpp:2818 +#: src/libslic3r/PrintConfig.cpp:2826 src/libslic3r/PrintConfig.cpp:2886 +#: src/libslic3r/PrintConfig.cpp:2895 src/libslic3r/PrintConfig.cpp:3066 msgid "Layers and Perimeters" msgstr "Lagen en perimeters" @@ -3825,26 +3840,26 @@ msgstr "Lagen en perimeters" #: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1547 #: src/slic3r/GUI/Tab.cpp:1549 src/libslic3r/ExtrusionEntity.cpp:340 #: src/libslic3r/ExtrusionEntity.cpp:372 src/libslic3r/PrintConfig.cpp:669 -#: src/libslic3r/PrintConfig.cpp:2064 src/libslic3r/PrintConfig.cpp:2073 -#: src/libslic3r/PrintConfig.cpp:2082 src/libslic3r/PrintConfig.cpp:2092 -#: src/libslic3r/PrintConfig.cpp:2101 src/libslic3r/PrintConfig.cpp:2523 -#: src/libslic3r/PrintConfig.cpp:2529 src/libslic3r/PrintConfig.cpp:2537 -#: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2560 -#: src/libslic3r/PrintConfig.cpp:2568 src/libslic3r/PrintConfig.cpp:2586 -#: src/libslic3r/PrintConfig.cpp:2603 src/libslic3r/PrintConfig.cpp:2624 -#: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2654 -#: src/libslic3r/PrintConfig.cpp:2672 src/libslic3r/PrintConfig.cpp:2687 -#: src/libslic3r/PrintConfig.cpp:2697 src/libslic3r/PrintConfig.cpp:2706 -#: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2731 -#: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2755 -#: src/libslic3r/PrintConfig.cpp:2756 src/libslic3r/PrintConfig.cpp:2765 -#: src/libslic3r/PrintConfig.cpp:2779 src/libslic3r/PrintConfig.cpp:2787 -#: src/libslic3r/PrintConfig.cpp:2801 +#: src/libslic3r/PrintConfig.cpp:2063 src/libslic3r/PrintConfig.cpp:2072 +#: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2091 +#: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2522 +#: src/libslic3r/PrintConfig.cpp:2528 src/libslic3r/PrintConfig.cpp:2536 +#: src/libslic3r/PrintConfig.cpp:2549 src/libslic3r/PrintConfig.cpp:2559 +#: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2585 +#: src/libslic3r/PrintConfig.cpp:2602 src/libslic3r/PrintConfig.cpp:2623 +#: src/libslic3r/PrintConfig.cpp:2636 src/libslic3r/PrintConfig.cpp:2653 +#: src/libslic3r/PrintConfig.cpp:2671 src/libslic3r/PrintConfig.cpp:2686 +#: src/libslic3r/PrintConfig.cpp:2696 src/libslic3r/PrintConfig.cpp:2705 +#: src/libslic3r/PrintConfig.cpp:2716 src/libslic3r/PrintConfig.cpp:2730 +#: src/libslic3r/PrintConfig.cpp:2746 src/libslic3r/PrintConfig.cpp:2754 +#: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2764 +#: src/libslic3r/PrintConfig.cpp:2778 src/libslic3r/PrintConfig.cpp:2786 +#: src/libslic3r/PrintConfig.cpp:2800 msgid "Support material" msgstr "Support" #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135 -#: src/libslic3r/PrintConfig.cpp:3023 src/libslic3r/PrintConfig.cpp:3031 +#: src/libslic3r/PrintConfig.cpp:3022 src/libslic3r/PrintConfig.cpp:3030 msgid "Wipe options" msgstr "Afveegopties" @@ -3854,41 +3869,41 @@ msgstr "Basisplaat en support" #: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245 #: src/slic3r/GUI/Tab.cpp:1513 src/libslic3r/ExtrusionEntity.cpp:336 -#: src/libslic3r/ExtrusionEntity.cpp:364 src/libslic3r/PrintConfig.cpp:1556 -#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1576 -#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1594 -#: src/libslic3r/PrintConfig.cpp:1596 +#: src/libslic3r/ExtrusionEntity.cpp:364 src/libslic3r/PrintConfig.cpp:1555 +#: src/libslic3r/PrintConfig.cpp:1561 src/libslic3r/PrintConfig.cpp:1575 +#: src/libslic3r/PrintConfig.cpp:1585 src/libslic3r/PrintConfig.cpp:1593 +#: src/libslic3r/PrintConfig.cpp:1595 msgid "Ironing" msgstr "Strijken" -#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1279 -#: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1295 -#: src/libslic3r/PrintConfig.cpp:1305 +#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1278 +#: src/libslic3r/PrintConfig.cpp:1279 src/libslic3r/PrintConfig.cpp:1294 +#: src/libslic3r/PrintConfig.cpp:1304 msgid "Fuzzy Skin" msgstr "Oneffen oppervlak" #: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220 #: src/slic3r/GUI/Tab.cpp:1581 src/libslic3r/PrintConfig.cpp:506 -#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1322 -#: src/libslic3r/PrintConfig.cpp:1513 src/libslic3r/PrintConfig.cpp:1595 -#: src/libslic3r/PrintConfig.cpp:1989 src/libslic3r/PrintConfig.cpp:2321 -#: src/libslic3r/PrintConfig.cpp:2374 src/libslic3r/PrintConfig.cpp:2872 +#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1321 +#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1594 +#: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:2320 +#: src/libslic3r/PrintConfig.cpp:2373 src/libslic3r/PrintConfig.cpp:2871 msgid "Speed" msgstr "Snelheid" #: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1620 #: src/slic3r/GUI/Tab.cpp:2301 src/libslic3r/PrintConfig.cpp:792 -#: src/libslic3r/PrintConfig.cpp:1466 src/libslic3r/PrintConfig.cpp:1966 -#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2616 -#: src/libslic3r/PrintConfig.cpp:2644 +#: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:1965 +#: src/libslic3r/PrintConfig.cpp:2341 src/libslic3r/PrintConfig.cpp:2615 +#: src/libslic3r/PrintConfig.cpp:2643 msgid "Extruders" msgstr "Extruders" #: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:750 -#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:1214 -#: src/libslic3r/PrintConfig.cpp:1474 src/libslic3r/PrintConfig.cpp:1975 -#: src/libslic3r/PrintConfig.cpp:2362 src/libslic3r/PrintConfig.cpp:2625 -#: src/libslic3r/PrintConfig.cpp:2859 +#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:1213 +#: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:1974 +#: src/libslic3r/PrintConfig.cpp:2361 src/libslic3r/PrintConfig.cpp:2624 +#: src/libslic3r/PrintConfig.cpp:2858 msgid "Extrusion Width" msgstr "Extrusiebreedte" @@ -3903,48 +3918,48 @@ msgstr "Skirt en brim" #: src/slic3r/GUI/Tab.cpp:1646 src/slic3r/GUI/Tab.cpp:2028 #: src/slic3r/GUI/Tab.cpp:2399 src/slic3r/GUI/Tab.cpp:4726 #: src/libslic3r/PrintConfig.cpp:259 src/libslic3r/PrintConfig.cpp:494 -#: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1502 -#: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:2499 -#: src/libslic3r/PrintConfig.cpp:2509 src/libslic3r/PrintConfig.cpp:3047 -#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3093 -#: src/libslic3r/PrintConfig.cpp:3108 src/libslic3r/PrintConfig.cpp:3121 -#: src/libslic3r/PrintConfig.cpp:3130 src/libslic3r/PrintConfig.cpp:3142 -#: src/libslic3r/PrintConfig.cpp:3339 +#: src/libslic3r/PrintConfig.cpp:1414 src/libslic3r/PrintConfig.cpp:1501 +#: src/libslic3r/PrintConfig.cpp:1548 src/libslic3r/PrintConfig.cpp:2498 +#: src/libslic3r/PrintConfig.cpp:2508 src/libslic3r/PrintConfig.cpp:3046 +#: src/libslic3r/PrintConfig.cpp:3081 src/libslic3r/PrintConfig.cpp:3092 +#: src/libslic3r/PrintConfig.cpp:3107 src/libslic3r/PrintConfig.cpp:3120 +#: src/libslic3r/PrintConfig.cpp:3129 src/libslic3r/PrintConfig.cpp:3141 +#: src/libslic3r/PrintConfig.cpp:3338 msgid "Advanced" msgstr "Geavanceerd" #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428 #: src/slic3r/GUI/Tab.cpp:4660 src/slic3r/GUI/Tab.cpp:4661 -#: src/libslic3r/PrintConfig.cpp:3533 src/libslic3r/PrintConfig.cpp:3540 -#: src/libslic3r/PrintConfig.cpp:3549 src/libslic3r/PrintConfig.cpp:3558 -#: src/libslic3r/PrintConfig.cpp:3568 src/libslic3r/PrintConfig.cpp:3578 -#: src/libslic3r/PrintConfig.cpp:3615 src/libslic3r/PrintConfig.cpp:3622 -#: src/libslic3r/PrintConfig.cpp:3633 src/libslic3r/PrintConfig.cpp:3643 -#: src/libslic3r/PrintConfig.cpp:3652 src/libslic3r/PrintConfig.cpp:3665 -#: src/libslic3r/PrintConfig.cpp:3675 src/libslic3r/PrintConfig.cpp:3684 -#: src/libslic3r/PrintConfig.cpp:3694 src/libslic3r/PrintConfig.cpp:3705 -#: src/libslic3r/PrintConfig.cpp:3713 +#: src/libslic3r/PrintConfig.cpp:3532 src/libslic3r/PrintConfig.cpp:3539 +#: src/libslic3r/PrintConfig.cpp:3548 src/libslic3r/PrintConfig.cpp:3557 +#: src/libslic3r/PrintConfig.cpp:3567 src/libslic3r/PrintConfig.cpp:3577 +#: src/libslic3r/PrintConfig.cpp:3614 src/libslic3r/PrintConfig.cpp:3621 +#: src/libslic3r/PrintConfig.cpp:3632 src/libslic3r/PrintConfig.cpp:3642 +#: src/libslic3r/PrintConfig.cpp:3651 src/libslic3r/PrintConfig.cpp:3664 +#: src/libslic3r/PrintConfig.cpp:3674 src/libslic3r/PrintConfig.cpp:3683 +#: src/libslic3r/PrintConfig.cpp:3693 src/libslic3r/PrintConfig.cpp:3704 +#: src/libslic3r/PrintConfig.cpp:3712 msgid "Supports" msgstr "Support" #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:575 #: src/slic3r/GUI/Tab.cpp:4701 src/slic3r/GUI/Tab.cpp:4702 -#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3721 -#: src/libslic3r/PrintConfig.cpp:3728 src/libslic3r/PrintConfig.cpp:3742 -#: src/libslic3r/PrintConfig.cpp:3753 src/libslic3r/PrintConfig.cpp:3763 -#: src/libslic3r/PrintConfig.cpp:3785 src/libslic3r/PrintConfig.cpp:3796 -#: src/libslic3r/PrintConfig.cpp:3803 src/libslic3r/PrintConfig.cpp:3810 -#: src/libslic3r/PrintConfig.cpp:3821 src/libslic3r/PrintConfig.cpp:3830 -#: src/libslic3r/PrintConfig.cpp:3839 +#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3720 +#: src/libslic3r/PrintConfig.cpp:3727 src/libslic3r/PrintConfig.cpp:3741 +#: src/libslic3r/PrintConfig.cpp:3752 src/libslic3r/PrintConfig.cpp:3762 +#: src/libslic3r/PrintConfig.cpp:3784 src/libslic3r/PrintConfig.cpp:3795 +#: src/libslic3r/PrintConfig.cpp:3802 src/libslic3r/PrintConfig.cpp:3809 +#: src/libslic3r/PrintConfig.cpp:3820 src/libslic3r/PrintConfig.cpp:3829 +#: src/libslic3r/PrintConfig.cpp:3838 msgid "Pad" msgstr "Basisplaat" #: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4719 #: src/slic3r/GUI/Tab.cpp:4720 src/libslic3r/SLA/Hollowing.cpp:73 #: src/libslic3r/SLA/Hollowing.cpp:85 src/libslic3r/SLA/Hollowing.cpp:105 -#: src/libslic3r/SLA/Hollowing.cpp:114 src/libslic3r/PrintConfig.cpp:3849 -#: src/libslic3r/PrintConfig.cpp:3856 src/libslic3r/PrintConfig.cpp:3866 -#: src/libslic3r/PrintConfig.cpp:3875 +#: src/libslic3r/SLA/Hollowing.cpp:114 src/libslic3r/PrintConfig.cpp:3848 +#: src/libslic3r/PrintConfig.cpp:3855 src/libslic3r/PrintConfig.cpp:3865 +#: src/libslic3r/PrintConfig.cpp:3874 msgid "Hollowing" msgstr "Uithollen" @@ -4037,13 +4052,13 @@ msgstr "Repareer met NetFabb" #: src/slic3r/GUI/GUI_Factories.cpp:715 msgid "Export as STL" -msgstr "Exporteer als STL-bestand" +msgstr "Exporteer als .STL-bestand" #: src/slic3r/GUI/GUI_Factories.cpp:726 msgid "Reload the selected volumes from disk" msgstr "Herlaad de geselecteerde volumes vanaf schijf" -#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3568 +#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3555 msgid "Replace with STL" msgstr "Vervang met STL" @@ -4057,7 +4072,7 @@ msgstr "Stel extruder in voor de geselecteerde items" #: src/slic3r/GUI/GUI_Factories.cpp:778 src/slic3r/Utils/Repetier.cpp:126 #: src/slic3r/Utils/Repetier.cpp:209 src/libslic3r/PrintConfig.cpp:634 -#: src/libslic3r/PrintConfig.cpp:2739 +#: src/libslic3r/PrintConfig.cpp:2738 msgid "Default" msgstr "Standaard" @@ -4069,24 +4084,24 @@ msgstr "Verschaal tot printvolume" msgid "Scale the selected object to fit the print volume" msgstr "Verschaal het geselecteerde object tot deze in het printvolume past" -#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5655 +#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5642 msgid "Convert from imperial units" msgstr "Converteer naar Engelse eenheden" -#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5656 +#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5643 msgid "Revert conversion from imperial units" msgstr "Conversie van Engelse eenheden ongedaan maken" -#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5657 +#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5644 msgid "Convert from meters" msgstr "Converteer vanaf meters" -#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5657 +#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5644 msgid "Revert conversion from meters" msgstr "Omrekenen van meters terugdraaien" -#: src/slic3r/GUI/GUI_Factories.cpp:859 src/slic3r/GUI/GUI_ObjectList.cpp:2135 -#: src/libslic3r/PrintConfig.cpp:4492 +#: src/slic3r/GUI/GUI_Factories.cpp:859 src/slic3r/GUI/GUI_ObjectList.cpp:2133 +#: src/libslic3r/PrintConfig.cpp:4491 msgid "Merge" msgstr "Samenvoegen" @@ -4147,7 +4162,7 @@ msgid "Split the selected object into individual parts" msgstr "Splits de geselecteerde objecten in individuele onderdelen" #: src/slic3r/GUI/GUI_Factories.cpp:944 src/slic3r/GUI/GUI_Factories.cpp:954 -#: src/slic3r/GUI/GUI_Factories.cpp:975 src/libslic3r/PrintConfig.cpp:4521 +#: src/slic3r/GUI/GUI_Factories.cpp:975 src/libslic3r/PrintConfig.cpp:4520 msgid "Split" msgstr "Splits" @@ -4265,7 +4280,7 @@ msgstr "Resterende fouten" #: src/slic3r/GUI/GUI_ObjectList.cpp:436 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" -"Rechtermuisklik op het pictogram om het STL-bestand met NetFabb te repareren" +"Rechtermuisklik op het pictogram om het .STL-bestand met NetFabb te repareren" #: src/slic3r/GUI/GUI_ObjectList.cpp:482 msgid "Right button click the icon to change the object settings" @@ -4296,7 +4311,7 @@ msgid "Rename Sub-object" msgstr "Hernoem subobject" #: src/slic3r/GUI/GUI_ObjectList.cpp:1242 -#: src/slic3r/GUI/GUI_ObjectList.cpp:4006 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3997 msgid "Instances to Separated Objects" msgstr "Zet instanties om in objecten" @@ -4344,7 +4359,7 @@ msgstr "Laad bewerker" msgid "Loading" msgstr "Aan het laden" -#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2417 +#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2406 msgid "Loading file" msgstr "Bestand laden" @@ -4386,7 +4401,7 @@ msgstr "Verplaats objecten naar bed" #: src/slic3r/GUI/GUI_ObjectList.cpp:1856 msgid "Remove variable layer height" -msgstr "Verwijder variable laagdikte" +msgstr "Verwijder variabele laagdikte" #: src/slic3r/GUI/GUI_ObjectList.cpp:1877 msgid "Delete Settings" @@ -4427,69 +4442,69 @@ msgstr "" msgid "Split to Parts" msgstr "Splits naar onderdelen" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2142 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2140 msgid "Merged" msgstr "Samengevoegd" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2237 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2228 msgid "Merge all parts to the one single object" msgstr "Voeg alle delen samen tot een enkel object" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2269 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2260 msgid "Add Layers" msgstr "Voeg lagen toe" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2438 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2429 msgid "Group manipulation" msgstr "Groep bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2453 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2444 msgid "Object manipulation" msgstr "Object bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2486 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2477 msgid "Object Settings to modify" msgstr "Objectinstellingen om te bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2490 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2481 msgid "Part Settings to modify" msgstr "Onderdeelinstellingen om te bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2495 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2486 msgid "Layer range Settings to modify" msgstr "Laagbereikinstellingen om te bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2501 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2492 msgid "Part manipulation" msgstr "Onderdeel bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2507 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2498 msgid "Instance manipulation" msgstr "Instantie bewerken" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2514 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2505 msgid "Height ranges" msgstr "Hoogtebereik" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2514 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2505 msgid "Settings for height range" msgstr "Instellingen voor hoogtebereik" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2750 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2741 msgid "Delete Selected Item" msgstr "Verwijder geselecteerd item" -#: src/slic3r/GUI/GUI_ObjectList.cpp:2943 +#: src/slic3r/GUI/GUI_ObjectList.cpp:2934 msgid "Delete Selected" msgstr "Verwijder selectie" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3019 -#: src/slic3r/GUI/GUI_ObjectList.cpp:3047 -#: src/slic3r/GUI/GUI_ObjectList.cpp:3067 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3010 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3038 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3058 msgid "Add Height Range" msgstr "Voeg hoogtebereik toe" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3113 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3104 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" @@ -4499,7 +4514,7 @@ msgstr "" "Het volgende laagbereik is te dun om in tweeën te splitsen\n" "zonder over de minimale laagdikte heen te gaan." -#: src/slic3r/GUI/GUI_ObjectList.cpp:3117 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3108 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" @@ -4511,7 +4526,7 @@ msgstr "" "Het gat tussen het huidige en volgende laagbereik is kleiner dan\n" "de minimum toegestane laagdikte." -#: src/slic3r/GUI/GUI_ObjectList.cpp:3122 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3113 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." @@ -4519,144 +4534,144 @@ msgstr "" "Kan geen nieuw laagbereik toevoegen na het huidige laagbereik.\n" "Het huidige laagbereik overlapt met het volgende laagbereik." -#: src/slic3r/GUI/GUI_ObjectList.cpp:3181 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3172 msgid "Edit Height Range" msgstr "Bewerk hoogtebereik" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3500 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3491 msgid "Selection-Remove from list" msgstr "Selectie - Verwijder van lijst" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3512 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3503 msgid "Selection-Add from list" msgstr "Selectie - Voeg toe aan lijst" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3649 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3640 msgid "Object or Instance" msgstr "Object of instantie" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3650 -#: src/slic3r/GUI/GUI_ObjectList.cpp:3789 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3641 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Part" msgstr "Onderdeel" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3650 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3641 msgid "Layer" msgstr "Laag" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3652 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3643 msgid "Unsupported selection" msgstr "Niet-ondersteunde selectie" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3653 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3644 #, c-format, boost-format msgid "You started your selection with %s Item." msgstr "De selectie is gestart met item %s." -#: src/slic3r/GUI/GUI_ObjectList.cpp:3654 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3645 #, c-format, boost-format msgid "In this mode you can select only other %s Items%s" msgstr "In deze modus kunt u alleen andere %s items %s selecteren" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3657 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3648 msgid "of a current Object" msgstr "van het huidige object" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3662 -#: src/slic3r/GUI/GUI_ObjectList.cpp:3737 src/slic3r/GUI/Plater.cpp:181 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3653 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3728 src/slic3r/GUI/Plater.cpp:181 msgid "Info" msgstr "Info" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3784 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3775 msgid "You can't change a type of the last solid part of the object." msgstr "" "U kunt het type van het laatste onderdeel van een object niet wijzigen." -#: src/slic3r/GUI/GUI_ObjectList.cpp:3789 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Negative Volume" msgstr "Negatief volume" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3789 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Modifier" msgstr "Modificator" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3789 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Support Blocker" msgstr "Supportblokkering" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3789 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Support Enforcer" msgstr "Supportforcering" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3790 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3781 msgid "Select type of part" msgstr "Selecteer onderdeeltype" -#: src/slic3r/GUI/GUI_ObjectList.cpp:3795 +#: src/slic3r/GUI/GUI_ObjectList.cpp:3786 msgid "Change Part Type" msgstr "Wijzig onderdeeltype" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4028 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4019 msgid "Enter new name" msgstr "Voer nieuwe naam in" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4028 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4019 msgid "Renaming" msgstr "Hernoemen" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4091 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4082 msgid "Repairing model" msgstr "Model repareren" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4120 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4111 msgid "Fix through NetFabb" msgstr "Repareer met NetFabb" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4123 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4114 msgid "Fixing through NetFabb" msgstr "Repareren met NetFabb" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4153 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4144 msgid "The following model was repaired successfully" msgid_plural "The following models were repaired successfully" msgstr[0] "Het volgende model is succesvol gerepareerd" msgstr[1] "De volgende modellen zijn succesvol gerepareerd" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4159 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4150 msgid "Folowing model repair failed" msgid_plural "Folowing models repair failed" msgstr[0] "Volgende model repareren mislukt" msgstr[1] "Volgende modellen repareren mislukt" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4164 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4155 msgid "Repairing was canceled" msgstr "Repareren is stopgezet" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4276 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4267 msgid "Change Extruders" msgstr "Wijzig extruders" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4416 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4407 msgid "Set Printable group" msgstr "Stel printbare groep in" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4416 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4407 msgid "Set Unprintable group" msgstr "Stel onprintbare groep in" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4418 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4409 msgid "Set Printable" msgstr "Stel in op printbaar" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4418 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4409 msgid "Set Unprintable" msgstr "Stel in op niet-printbaar" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4419 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4410 msgid "Set Printable Instance" msgstr "Stel printbare instanties in" -#: src/slic3r/GUI/GUI_ObjectList.cpp:4419 +#: src/slic3r/GUI/GUI_ObjectList.cpp:4410 msgid "Set Unprintable Instance" msgstr "Stel instantie in op niet-printbaar" @@ -4797,7 +4812,7 @@ msgstr "Weergave" msgid "Height" msgstr "Hoogte" -#: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:3001 +#: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:3000 msgid "Width" msgstr "Breedte" @@ -4842,14 +4857,14 @@ msgid "Internal infill" msgstr "Inwendige vulling" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:334 -#: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:2361 -#: src/libslic3r/PrintConfig.cpp:2373 +#: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:2360 +#: src/libslic3r/PrintConfig.cpp:2372 msgid "Solid infill" msgstr "Dichte vulling" #: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:335 -#: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2858 -#: src/libslic3r/PrintConfig.cpp:2871 +#: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2857 +#: src/libslic3r/PrintConfig.cpp:2870 msgid "Top solid infill" msgstr "Bovenste dichte vulling" @@ -4859,7 +4874,7 @@ msgid "Bridge infill" msgstr "Brugvulling" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:338 -#: src/libslic3r/ExtrusionEntity.cpp:368 src/libslic3r/PrintConfig.cpp:1321 +#: src/libslic3r/ExtrusionEntity.cpp:368 src/libslic3r/PrintConfig.cpp:1320 msgid "Gap fill" msgstr "Gatenvulling" @@ -4869,7 +4884,7 @@ msgid "Skirt/Brim" msgstr "Skirt/Brim" #: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:341 -#: src/libslic3r/ExtrusionEntity.cpp:374 src/libslic3r/PrintConfig.cpp:2705 +#: src/libslic3r/ExtrusionEntity.cpp:374 src/libslic3r/PrintConfig.cpp:2704 msgid "Support material interface" msgstr "Supportinterface" @@ -4982,15 +4997,15 @@ msgstr "Er is een onverwachte fout opgetreden" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:21 msgid "Best surface quality" -msgstr "" +msgstr "Beste oppervlaktekwaliteit" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:23 msgid "Optimize object rotation for best surface quality." -msgstr "" +msgstr "Optimaliseer objectrotatie voor beste oppervlaktekwaliteit." #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24 msgid "Reduced overhang slopes" -msgstr "" +msgstr "Gereduceerde overhanghellingen" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:26 msgid "" @@ -4999,14 +5014,18 @@ msgid "" "Note that this method will try to find the best surface of the object for " "touching the print bed if no elevation is set." msgstr "" +"Optimaliseer objectrotatie voor een minimale hoeveelheid overhangingen die " +"support nodig hebben.\n" +"Let op dat deze methode zoekt naar het beste vlak van het object om op het " +"printbed te leggen als geen verhoging ingesteld is." #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:30 msgid "Lowest Z height" -msgstr "" +msgstr "Laagste Z-hoogte" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:32 msgid "Rotate the model to have the lowest z height for faster print time." -msgstr "" +msgstr "Roteer het model voor een minimale hoogte voor snellere printtijd." #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59 msgid "Searching for optimal orientation" @@ -5074,7 +5093,7 @@ msgstr "Succesvol geïmporteerd." #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:187 msgid "The file does not exist." -msgstr "" +msgstr "Het bestand bestaat niet." #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:221 msgid "" @@ -5084,11 +5103,11 @@ msgstr "" "Het geïmporteerde SLA-archief bevat geen presets. De huidige SLA-presets " "worden gebruikt als oplossing." -#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:234 src/slic3r/GUI/Plater.cpp:2458 +#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:234 src/slic3r/GUI/Plater.cpp:2447 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "U kunt geen SLA-project laden met een meerdelig object op het bed" -#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:236 src/slic3r/GUI/Plater.cpp:2460 +#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:236 src/slic3r/GUI/Plater.cpp:2449 msgid "Attention!" msgstr "Attentie!" @@ -5101,42 +5120,44 @@ msgid "New project, clear plater" msgstr "Start nieuw project, verwijder modellen" #: src/slic3r/GUI/KBShortcutsDialog.cpp:78 -msgid "Open project AMF/3MF with config, clear plater" -msgstr "Open AMF- of 3MF-project met configuratie, verwijder huidige modellen" +msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" +msgstr "" +"Open .STL-, .OBJ-, .AMF- of .3MF-project met configuratie, verwijder huidige " +"modellen" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 msgid "Save project (3mf)" -msgstr "3MF-project opslaan" +msgstr ".3MF-project opslaan" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 msgid "Save project as (3mf)" -msgstr "3MF-project opslaan als" +msgstr ".3MF-project opslaan als" #: src/slic3r/GUI/KBShortcutsDialog.cpp:81 msgid "(Re)slice" msgstr "(Her)slice" #: src/slic3r/GUI/KBShortcutsDialog.cpp:83 -msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater" +msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" -"Importeer STL-, 3MF-, STEP-, OBJ- of AMF-bestanden zonder configuratie en " +"Importeer .STL-, .OBJ-, .AMF- of .3MF-bestanden zonder configuratie en " "behoud modellen" #: src/slic3r/GUI/KBShortcutsDialog.cpp:84 msgid "Import Config from ini/amf/3mf/gcode" -msgstr "Importeer configuratie van INI-, AMF-, 3MF- of gcode-bestand" +msgstr "Importeer configuratie van .INI-, .AMF-, .3MF- of .gcode-bestand" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" -"Laad configuratie van INI-, AMF-, 3MF- of gcode-bestanden en voeg samen" +"Laad configuratie van .INI-, .AMF-, .3MF- of .gcode-bestanden en voeg samen" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:913 -#: src/slic3r/GUI/Plater.cpp:6543 src/libslic3r/PrintConfig.cpp:4392 +#: src/slic3r/GUI/Plater.cpp:6530 src/libslic3r/PrintConfig.cpp:4391 msgid "Export G-code" -msgstr "Exporteer gcode-bestand" +msgstr "Exporteer .gcode-bestand" -#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6544 +#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6531 msgid "Send G-code" msgstr "Stuur G-code" @@ -5409,7 +5430,8 @@ msgstr "Klap de zijbalk in/uit" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" -"Toon/verberg 3DConnexion-apparaten-instellingenvenster als dit aanstaat" +"Toon/verberg 3DConnexion-apparaten-instellingenvenster als dit is " +"ingeschakeld" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 @@ -5527,7 +5549,7 @@ msgstr "Toon/verberg legenda en geschatte printtijd" msgid "Show/Hide G-code window" msgstr "Toon/verberg G-code venster" -#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4480 +#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4467 #: src/slic3r/GUI/Tab.cpp:2829 msgid "Preview" msgstr "Sliceweergave" @@ -5667,7 +5689,7 @@ msgid "Printer Settings" msgstr "Printerinstellingen" #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1719 -#: src/slic3r/GUI/Plater.cpp:2850 +#: src/slic3r/GUI/Plater.cpp:2839 msgid "Untitled" msgstr "Zonder titel" @@ -5694,7 +5716,7 @@ msgstr "Download de laatste softwareversie vanuit uw browser" #: src/slic3r/GUI/MainFrame.cpp:1081 #, c-format, boost-format msgid "%s &Website" -msgstr "%s-&website" +msgstr "%s-website" #: src/slic3r/GUI/MainFrame.cpp:1082 #, c-format, boost-format @@ -5729,7 +5751,7 @@ msgstr "Rapporteer een fout op %s" #: src/slic3r/GUI/MainFrame.cpp:1095 src/slic3r/GUI/MainFrame.cpp:1098 #, c-format, boost-format msgid "&About %s" -msgstr "&Over %s" +msgstr "Over %s" #: src/slic3r/GUI/MainFrame.cpp:1095 src/slic3r/GUI/MainFrame.cpp:1098 msgid "Show about dialog" @@ -5761,8 +5783,8 @@ msgstr "Isometrisch aanzicht" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" -#: src/slic3r/GUI/MainFrame.cpp:1125 src/libslic3r/PrintConfig.cpp:2886 -#: src/libslic3r/PrintConfig.cpp:2895 +#: src/slic3r/GUI/MainFrame.cpp:1125 src/libslic3r/PrintConfig.cpp:2885 +#: src/libslic3r/PrintConfig.cpp:2894 msgid "Top" msgstr "Bovenkant" @@ -5790,7 +5812,7 @@ msgstr "Voorkant" msgid "Front View" msgstr "Vooraanzicht" -#: src/slic3r/GUI/MainFrame.cpp:1132 src/libslic3r/PrintConfig.cpp:2243 +#: src/slic3r/GUI/MainFrame.cpp:1132 src/libslic3r/PrintConfig.cpp:2242 msgid "Rear" msgstr "Achterzijde" @@ -5859,8 +5881,8 @@ msgid "Save current project file as" msgstr "Projectbestand opslaan als" #: src/slic3r/GUI/MainFrame.cpp:1208 -msgid "Import STL/3MF/STEP/OBJ/AM&F" -msgstr "Importeer STL-, 3MF-, STEP-, OBJ- of AMF-bestanden" +msgid "Import STL/OBJ/AM&F/3MF" +msgstr "Importeer .STL-, .OBJ-, .AMF- of .3MF-bestanden" #: src/slic3r/GUI/MainFrame.cpp:1208 msgid "Load a model" @@ -5916,7 +5938,7 @@ msgstr "Exporteer G-code" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "Export current plate as G-code" -msgstr "Exporteer modellen als gcode-bestand" +msgstr "Exporteer modellen als .gcode-bestand" #: src/slic3r/GUI/MainFrame.cpp:1238 src/slic3r/GUI/MainFrame.cpp:1587 msgid "S&end G-code" @@ -5940,7 +5962,7 @@ msgstr "Exporteer modellen als STL" #: src/slic3r/GUI/MainFrame.cpp:1246 msgid "Export current plate as STL" -msgstr "Exporteer modellen als STL-bestand" +msgstr "Exporteer modellen als .STL-bestand" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export Plate as STL &Including Supports" @@ -5948,7 +5970,7 @@ msgstr "Exporteer modellen inclusief supports als STL" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export current plate as STL including supports" -msgstr "Exporteer modellen met support als STL-bestand" +msgstr "Exporteer modellen met support als .STL-bestand" #: src/slic3r/GUI/MainFrame.cpp:1257 src/slic3r/GUI/MainFrame.cpp:1538 msgid "Export &Toolpaths as OBJ" @@ -5956,7 +5978,7 @@ msgstr "Exporteer toolpaden als OBJ" #: src/slic3r/GUI/MainFrame.cpp:1257 src/slic3r/GUI/MainFrame.cpp:1538 msgid "Export toolpaths as OBJ" -msgstr "Exporteer toolpaden als OBJ-bestand" +msgstr "Exporteer toolpaden als .OBJ-bestand" #: src/slic3r/GUI/MainFrame.cpp:1261 msgid "Export &Config" @@ -6000,7 +6022,7 @@ msgstr "Snel slicen" #: src/slic3r/GUI/MainFrame.cpp:1280 msgid "Slice a file into a G-code" -msgstr "Slice naar een gcode-bestand" +msgstr "Slice naar een .gcode-bestand" #: src/slic3r/GUI/MainFrame.cpp:1286 msgid "Quick Slice and Save As" @@ -6008,7 +6030,7 @@ msgstr "Snel slicen en opslaan als" #: src/slic3r/GUI/MainFrame.cpp:1286 msgid "Slice a file into a G-code, save as" -msgstr "Slice naar gcode-bestand, opslaan als" +msgstr "Slice naar .gcode-bestand, opslaan als" #: src/slic3r/GUI/MainFrame.cpp:1292 msgid "Repeat Last Quick Slice" @@ -6020,7 +6042,7 @@ msgstr "Herhaal laatste snelle slice" #: src/slic3r/GUI/MainFrame.cpp:1300 msgid "(Re)Slice No&w" -msgstr "(&Her)slice nu" +msgstr "(Her)slice nu" #: src/slic3r/GUI/MainFrame.cpp:1300 msgid "Start new slicing process" @@ -6028,11 +6050,11 @@ msgstr "Start nieuw sliceproces" #: src/slic3r/GUI/MainFrame.cpp:1304 msgid "&Repair STL file" -msgstr "&Repareer STL-bestand" +msgstr "Repareer .STL-bestand" #: src/slic3r/GUI/MainFrame.cpp:1304 msgid "Automatically repair an STL file" -msgstr "Automatisch een STL-bestand repareren" +msgstr "Automatisch een .STL-bestand repareren" #: src/slic3r/GUI/MainFrame.cpp:1308 msgid "&G-code Preview" @@ -6231,15 +6253,15 @@ msgstr "Toon" #: src/slic3r/GUI/MainFrame.cpp:1463 src/slic3r/GUI/MainFrame.cpp:1564 msgid "&Help" -msgstr "&Help" +msgstr "Help" #: src/slic3r/GUI/MainFrame.cpp:1525 msgid "&Open G-code" -msgstr "&Open G-code" +msgstr "Open G-code" #: src/slic3r/GUI/MainFrame.cpp:1541 msgid "Open &PrusaSlicer" -msgstr "Open &PrusaSlicer" +msgstr "Open PrusaSlicer" #: src/slic3r/GUI/MainFrame.cpp:1586 msgid "E&xport" @@ -6255,7 +6277,7 @@ msgstr "Materiaalinstellingentab" #: src/slic3r/GUI/MainFrame.cpp:1613 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Kies een STL-, OBJ-, AMF-, 3MF- of PRUSA-bestand om te slicen:" +msgstr "Kies een .STL-, .OBJ-, .AMF-, .3MF- of .PRUSA-bestand om te slicen:" #: src/slic3r/GUI/MainFrame.cpp:1625 msgid "No previously sliced file." @@ -6288,10 +6310,10 @@ msgstr "G-code" #: src/slic3r/GUI/MainFrame.cpp:1680 msgid "Save zip file as:" -msgstr "ZIP-bestand opslaan als:" +msgstr ".ZIP-bestand opslaan als:" -#: src/slic3r/GUI/MainFrame.cpp:1689 src/slic3r/GUI/Plater.cpp:3329 -#: src/slic3r/GUI/Plater.cpp:6064 src/slic3r/GUI/Tab.cpp:1663 +#: src/slic3r/GUI/MainFrame.cpp:1689 src/slic3r/GUI/Plater.cpp:3316 +#: src/slic3r/GUI/Plater.cpp:6051 src/slic3r/GUI/Tab.cpp:1663 #: src/slic3r/GUI/Tab.cpp:4727 msgid "Slicing" msgstr "Slicen" @@ -6313,17 +6335,17 @@ msgstr "Slicen klaar!" #: src/slic3r/GUI/MainFrame.cpp:1733 msgid "Select the STL file to repair:" -msgstr "Selecteer het STL-bestand om te repareren:" +msgstr "Selecteer het .STL-bestand om te repareren:" #: src/slic3r/GUI/MainFrame.cpp:1743 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" -msgstr "OBJ-bestand opslaan als:" +msgstr ".OBJ-bestand opslaan als:" #: src/slic3r/GUI/MainFrame.cpp:1754 msgid "Your file was repaired." msgstr "Het bestand is gerepareerd." -#: src/slic3r/GUI/MainFrame.cpp:1754 src/libslic3r/PrintConfig.cpp:4497 +#: src/slic3r/GUI/MainFrame.cpp:1754 src/libslic3r/PrintConfig.cpp:4496 msgid "Repair" msgstr "Repareer" @@ -6406,7 +6428,7 @@ msgstr "%s fout" #: src/slic3r/GUI/MsgDialog.cpp:228 #, c-format, boost-format msgid "%s has encountered an error" -msgstr "%s heeft een fout veroorzaakt" +msgstr "%s heeft een fout opgelopen" #: src/slic3r/GUI/MsgDialog.cpp:247 #, c-format, boost-format @@ -6506,22 +6528,22 @@ msgstr "Annuleer upload" #, c-format, boost-format msgid "%1$d object was loaded with custom supports." msgid_plural "%1$d objects were loaded with custom supports." -msgstr[0] "%1$d object is geladen met aangepaste supports." -msgstr[1] "%1$d objecten zijn geladen met aangepaste supports." +msgstr[0] "%1$d object is geladen met custom supports." +msgstr[1] "%1$d objecten zijn geladen met custom supports." #: src/slic3r/GUI/NotificationManager.cpp:997 #, c-format, boost-format msgid "%1$d object was loaded with custom seam." msgid_plural "%1$d objects were loaded with custom seam." -msgstr[0] "%1$d object is geladen met aangepaste naad." -msgstr[1] "%1$d objecten zijn geladen met aangepaste naad." +msgstr[0] "%1$d object is geladen met een custom naad." +msgstr[1] "%1$d objecten zijn geladen met een custom naad." #: src/slic3r/GUI/NotificationManager.cpp:998 #, c-format, boost-format msgid "%1$d object was loaded with multimaterial painting." msgid_plural "%1$d objects were loaded with multimaterial painting." -msgstr[0] "%1$d object is geladen met multi-material inkleuring." -msgstr[1] "%1$d objecten zijn geladen met multi-material inkleuring." +msgstr[0] "%1$d object is geladen met multi-materiaal schilderingen." +msgstr[1] "%1$d objecten zijn geladen met multi-materiaal schilderingen." #: src/slic3r/GUI/NotificationManager.cpp:999 #, c-format, boost-format @@ -6534,8 +6556,8 @@ msgstr[1] "%1$d objecten zijn geladen met variabele laagdikte." #, c-format, boost-format msgid "%1$d object was loaded with partial sinking." msgid_plural "%1$d objects were loaded with partial sinking." -msgstr[0] "%1$d object is geladen met een (gedeeltelijke) verzakking." -msgstr[1] "%1$d objecten zijn geladen met een (gedeeltelijke) verzakking." +msgstr[0] "%1$d object is geladen met gedeeltelijk verzakken." +msgstr[1] "%1$d objecten zijn geladen met gedeeltelijk verzakken." #: src/slic3r/GUI/NotificationManager.cpp:1113 msgid "Slicing finished." @@ -6560,7 +6582,7 @@ msgstr "Fout:" #: src/slic3r/GUI/NotificationManager.cpp:1459 #: src/slic3r/GUI/NotificationManager.cpp:1486 #: src/slic3r/GUI/NotificationManager.cpp:1494 -#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3197 +#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3184 msgid "WARNING:" msgstr "Waarschuwing:" @@ -6595,7 +6617,7 @@ msgstr "Lagen" msgid "Range" msgstr "Bereik" -#: src/slic3r/GUI/OpenGLManager.cpp:258 +#: src/slic3r/GUI/OpenGLManager.cpp:257 #, c-format, boost-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" @@ -6604,11 +6626,11 @@ msgstr "" "PrusaSlicer vereist een grafische driver die OpenGL 2.0 kan draaien,\n" "terwijl OpenGL-versie %s, render %s, leverancier %s is gedetecteerd." -#: src/slic3r/GUI/OpenGLManager.cpp:261 +#: src/slic3r/GUI/OpenGLManager.cpp:260 msgid "You may need to update your graphics card driver." msgstr "U moet mogelijk uw grafische kaart updaten." -#: src/slic3r/GUI/OpenGLManager.cpp:264 +#: src/slic3r/GUI/OpenGLManager.cpp:263 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw-renderer parameter." @@ -6617,11 +6639,11 @@ msgstr "" "modelweergave door prusa-slicer.exe te draaien met de --sw-renderer " "parameter." -#: src/slic3r/GUI/OpenGLManager.cpp:266 +#: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "Unsupported OpenGL version" msgstr "Niet-ondersteunde OpenGL-versie" -#: src/slic3r/GUI/OpenGLManager.cpp:274 +#: src/slic3r/GUI/OpenGLManager.cpp:273 #, c-format, boost-format msgid "" "Unable to load the following shaders:\n" @@ -6630,7 +6652,7 @@ msgstr "" "Kan de volgende sjablonen niet laden:\n" "%s" -#: src/slic3r/GUI/OpenGLManager.cpp:275 +#: src/slic3r/GUI/OpenGLManager.cpp:274 msgid "Error loading shaders" msgstr "Fout bij het laden van de sjablonen" @@ -6732,7 +6754,7 @@ msgstr "De ingevoerde naam is leeg. Kan niet opgeslagen worden." #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:634 msgid "You have to enter a printer name." -msgstr "" +msgstr "U moet een printernaam invoeren." #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:642 #, boost-format @@ -6825,8 +6847,8 @@ msgstr "Aantal toolwisselingen" msgid "Select what kind of support do you need" msgstr "Selecteer welk type support nodig is" -#: src/slic3r/GUI/Plater.cpp:433 src/libslic3r/PrintConfig.cpp:2559 -#: src/libslic3r/PrintConfig.cpp:3614 +#: src/slic3r/GUI/Plater.cpp:433 src/libslic3r/PrintConfig.cpp:2558 +#: src/libslic3r/PrintConfig.cpp:3613 msgid "Support on build plate only" msgstr "Support alleen op het bed" @@ -6864,12 +6886,12 @@ msgstr "Onder het object" msgid "Around object" msgstr "Rondom het object" -#: src/slic3r/GUI/Plater.cpp:894 src/slic3r/GUI/Plater.cpp:6544 +#: src/slic3r/GUI/Plater.cpp:894 src/slic3r/GUI/Plater.cpp:6531 msgid "Send to printer" msgstr "Stuur naar printer" -#: src/slic3r/GUI/Plater.cpp:914 src/slic3r/GUI/Plater.cpp:3329 -#: src/slic3r/GUI/Plater.cpp:6067 +#: src/slic3r/GUI/Plater.cpp:914 src/slic3r/GUI/Plater.cpp:3316 +#: src/slic3r/GUI/Plater.cpp:6054 msgid "Slice now" msgstr "Slice nu" @@ -6923,8 +6945,8 @@ msgstr "Filament in extruder %1%" msgid "(including spool)" msgstr "(inclusief spoel)" -#: src/slic3r/GUI/Plater.cpp:1411 src/libslic3r/PrintConfig.cpp:1068 -#: src/libslic3r/PrintConfig.cpp:3408 src/libslic3r/PrintConfig.cpp:3409 +#: src/slic3r/GUI/Plater.cpp:1411 src/libslic3r/PrintConfig.cpp:1067 +#: src/libslic3r/PrintConfig.cpp:3407 src/libslic3r/PrintConfig.cpp:3408 msgid "Cost" msgstr "Kosten" @@ -6955,7 +6977,7 @@ msgstr "Wilt u de wijzigingen opslaan naar \"%1%\"?" #: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/Preferences.cpp:222 msgid "Ask for unsaved changes in project" -msgstr "" +msgstr "Vraag naar niet-opgeslagen wijzigingen in dit project" #: src/slic3r/GUI/Plater.cpp:1733 msgid "" @@ -6963,6 +6985,9 @@ msgid "" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" +"U wordt hier niet opnieuw over gevraagd bij:\n" +"- het sluiten van PrusaSlicer;\n" +"- het laden of openen van een nieuw project" #: src/slic3r/GUI/Plater.cpp:2198 #, c-format, boost-format @@ -6978,7 +7003,7 @@ msgstr "" msgid "Ejecting of device %s(%s) has failed." msgstr "Uitwerpen van apparat %s(%s) mislukt." -#: src/slic3r/GUI/Plater.cpp:2222 src/slic3r/GUI/Plater.cpp:5108 +#: src/slic3r/GUI/Plater.cpp:2222 src/slic3r/GUI/Plater.cpp:5095 msgid "New Project" msgstr "Nieuw project" @@ -6986,7 +7011,7 @@ msgstr "Nieuw project" msgid "Expand sidebar" msgstr "Zijbalk uitklappen" -#: src/slic3r/GUI/Plater.cpp:2518 +#: src/slic3r/GUI/Plater.cpp:2507 msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" @@ -7000,12 +7025,12 @@ msgstr[1] "" "De vorige presets zijn tijdelijk geïnstalleerd op de actieve instantie van " "PrusaSlicer" -#: src/slic3r/GUI/Plater.cpp:2548 +#: src/slic3r/GUI/Plater.cpp:2537 #, boost-format msgid "Failed loading file \"%1%\" due to an invalid configuration." msgstr "Laden van bestand \"%1%\" mislukt dankzij een ongeldige configuratie." -#: src/slic3r/GUI/Plater.cpp:2568 +#: src/slic3r/GUI/Plater.cpp:2557 #, c-format, boost-format msgid "" "Object size from file %s appears to be zero.\n" @@ -7020,11 +7045,11 @@ msgstr[1] "" "Objectengrootte van bestand %s blijken nul te zijn.\n" "Het object is verwijderd van het model" -#: src/slic3r/GUI/Plater.cpp:2572 +#: src/slic3r/GUI/Plater.cpp:2561 msgid "The size of the object is zero" msgstr "De afmetingen van het object zijn nul" -#: src/slic3r/GUI/Plater.cpp:2585 +#: src/slic3r/GUI/Plater.cpp:2574 #, c-format, boost-format msgid "" "The dimensions of the object from file %s seem to be defined in meters.\n" @@ -7043,15 +7068,15 @@ msgstr[1] "" "De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen " "van het object verschalen?" -#: src/slic3r/GUI/Plater.cpp:2589 src/slic3r/GUI/Plater.cpp:2611 +#: src/slic3r/GUI/Plater.cpp:2578 src/slic3r/GUI/Plater.cpp:2600 msgid "The object is too small" msgstr "Het object is te klein" -#: src/slic3r/GUI/Plater.cpp:2590 src/slic3r/GUI/Plater.cpp:2612 +#: src/slic3r/GUI/Plater.cpp:2579 src/slic3r/GUI/Plater.cpp:2601 msgid "Apply to all the remaining small objects being loaded." msgstr "Pas toe op alle resterende kleine objecten die worden geladen." -#: src/slic3r/GUI/Plater.cpp:2607 +#: src/slic3r/GUI/Plater.cpp:2596 #, c-format, boost-format msgid "" "The dimensions of the object from file %s seem to be defined in inches.\n" @@ -7070,7 +7095,7 @@ msgstr[1] "" "De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen " "van het object verschalen?" -#: src/slic3r/GUI/Plater.cpp:2625 +#: src/slic3r/GUI/Plater.cpp:2614 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" @@ -7081,11 +7106,11 @@ msgstr "" "Moet het bestand worden geladen als één object met meerdere onderdelen\n" "in plaats van deze te beschouwen als meerdere objecten?" -#: src/slic3r/GUI/Plater.cpp:2628 src/slic3r/GUI/Plater.cpp:2683 +#: src/slic3r/GUI/Plater.cpp:2617 src/slic3r/GUI/Plater.cpp:2672 msgid "Multi-part object detected" msgstr "Meerdelig object gedetecteerd" -#: src/slic3r/GUI/Plater.cpp:2636 +#: src/slic3r/GUI/Plater.cpp:2625 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" @@ -7093,11 +7118,11 @@ msgstr "" "Dit bestand kan niet geladen worden in eenvoudige modus. Wilt u overstappen " "op geavanceerde modus?" -#: src/slic3r/GUI/Plater.cpp:2637 +#: src/slic3r/GUI/Plater.cpp:2626 msgid "Detected advanced data" msgstr "Geavanceerde data gedetecteerd" -#: src/slic3r/GUI/Plater.cpp:2657 +#: src/slic3r/GUI/Plater.cpp:2646 #, c-format, boost-format msgid "" "You can't to add the object(s) from %s because of one or some of them " @@ -7106,7 +7131,7 @@ msgstr "" "U kan geen objecten toevoegen van %s, omdat sommige daarvan meerdelig kunnen " "zijn" -#: src/slic3r/GUI/Plater.cpp:2680 +#: src/slic3r/GUI/Plater.cpp:2669 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" @@ -7116,7 +7141,7 @@ msgstr "" "Moeten deze objecten beschouwd worden als één object\n" "met meerdere onderdelen, of als meerdere objecten?" -#: src/slic3r/GUI/Plater.cpp:2799 +#: src/slic3r/GUI/Plater.cpp:2788 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." @@ -7124,39 +7149,39 @@ msgstr "" "Het object is te groot. Daarom is het automatisch verschaald tot de grootte " "van het printbed." -#: src/slic3r/GUI/Plater.cpp:2800 +#: src/slic3r/GUI/Plater.cpp:2789 msgid "Object too large?" msgstr "Object te groot?" -#: src/slic3r/GUI/Plater.cpp:2878 +#: src/slic3r/GUI/Plater.cpp:2867 msgid "Export STL file:" -msgstr "Exporteer STL-bestand:" +msgstr "Exporteer .STL-bestand:" -#: src/slic3r/GUI/Plater.cpp:2885 +#: src/slic3r/GUI/Plater.cpp:2874 msgid "Export AMF file:" -msgstr "Exporteer AMF-bestand:" +msgstr "Exporteer .AMF-bestand:" -#: src/slic3r/GUI/Plater.cpp:2891 +#: src/slic3r/GUI/Plater.cpp:2880 msgid "Save file as:" msgstr "Bestand opslaan als:" -#: src/slic3r/GUI/Plater.cpp:2897 +#: src/slic3r/GUI/Plater.cpp:2886 msgid "Export OBJ file:" -msgstr "Exporteer OBJ-bestand:" +msgstr "Exporteer .OBJ-bestand:" -#: src/slic3r/GUI/Plater.cpp:2995 +#: src/slic3r/GUI/Plater.cpp:2984 msgid "Delete Object" msgstr "Verwijder object" -#: src/slic3r/GUI/Plater.cpp:3007 +#: src/slic3r/GUI/Plater.cpp:2996 msgid "Delete All Objects" msgstr "Verwijder alle objecten" -#: src/slic3r/GUI/Plater.cpp:3035 +#: src/slic3r/GUI/Plater.cpp:3024 msgid "Reset Project" msgstr "Reset project" -#: src/slic3r/GUI/Plater.cpp:3118 +#: src/slic3r/GUI/Plater.cpp:3107 msgid "" "The selected object couldn't be split because it contains only one solid " "part." @@ -7164,103 +7189,103 @@ msgstr "" "Het geselecteerde object kan niet gesplitst worden omdat het maar één " "onderdeel bevat." -#: src/slic3r/GUI/Plater.cpp:3125 +#: src/slic3r/GUI/Plater.cpp:3114 msgid "All non-solid parts (modifiers) were deleted" msgstr "Alle niet-solide onderdelen (bewerkers) zijn verwijderd" -#: src/slic3r/GUI/Plater.cpp:3127 +#: src/slic3r/GUI/Plater.cpp:3116 msgid "Split to Objects" msgstr "Splits op naar objecten" -#: src/slic3r/GUI/Plater.cpp:3179 +#: src/slic3r/GUI/Plater.cpp:3166 msgid "" "An object has custom support enforcers which will not be used because " "supports are disabled." msgstr "" -"Een object heeft aangepaste supportforcering die niet gebruikt worden omdat " +"Een object heeft custom supportforcering die niet gebruikt worden omdat " "supports uit staan." -#: src/slic3r/GUI/Plater.cpp:3181 +#: src/slic3r/GUI/Plater.cpp:3168 msgid "Enable supports for enforcers only" msgstr "Sta supports voor forceringen alleen toe" -#: src/slic3r/GUI/Plater.cpp:3310 src/slic3r/GUI/Plater.cpp:4176 +#: src/slic3r/GUI/Plater.cpp:3297 src/slic3r/GUI/Plater.cpp:4163 msgid "Invalid data" msgstr "Ongeldige data" -#: src/slic3r/GUI/Plater.cpp:3380 +#: src/slic3r/GUI/Plater.cpp:3367 msgid "Another export job is currently running." msgstr "Een andere export loopt op dit moment." -#: src/slic3r/GUI/Plater.cpp:3466 +#: src/slic3r/GUI/Plater.cpp:3453 msgid "Replace from:" msgstr "Vervangen door:" -#: src/slic3r/GUI/Plater.cpp:3484 +#: src/slic3r/GUI/Plater.cpp:3471 msgid "Unable to replace with more than one volume" msgstr "Niet mogelijk om te vervangen met meer dan één volume" -#: src/slic3r/GUI/Plater.cpp:3484 src/slic3r/GUI/Plater.cpp:3563 +#: src/slic3r/GUI/Plater.cpp:3471 src/slic3r/GUI/Plater.cpp:3550 msgid "Error during replace" msgstr "Fout tijdens vervangen" -#: src/slic3r/GUI/Plater.cpp:3555 +#: src/slic3r/GUI/Plater.cpp:3542 msgid "Select the new file" msgstr "Selecteer het nieuwe bestand" -#: src/slic3r/GUI/Plater.cpp:3563 +#: src/slic3r/GUI/Plater.cpp:3550 msgid "File for the replace wasn't selected" msgstr "Vervangbestand is niet geselecteerd" -#: src/slic3r/GUI/Plater.cpp:3654 +#: src/slic3r/GUI/Plater.cpp:3641 msgid "Please select the file to reload" msgstr "Selecteer het bestand om te herladen" -#: src/slic3r/GUI/Plater.cpp:3685 src/slic3r/GUI/Plater.cpp:5243 +#: src/slic3r/GUI/Plater.cpp:3672 src/slic3r/GUI/Plater.cpp:5230 msgid "The selected file" msgstr "Het geselecteerde bestand" -#: src/slic3r/GUI/Plater.cpp:3686 +#: src/slic3r/GUI/Plater.cpp:3673 msgid "differs from the original file" msgstr "verschilt ten opzichte van het originele bestand" -#: src/slic3r/GUI/Plater.cpp:3686 +#: src/slic3r/GUI/Plater.cpp:3673 msgid "Do you want to replace it" msgstr "Wilt u het vervangen" -#: src/slic3r/GUI/Plater.cpp:3703 src/slic3r/GUI/Plater.cpp:3709 +#: src/slic3r/GUI/Plater.cpp:3690 src/slic3r/GUI/Plater.cpp:3696 msgid "Reload from:" msgstr "Herladen van:" -#: src/slic3r/GUI/Plater.cpp:3812 +#: src/slic3r/GUI/Plater.cpp:3799 msgid "Unable to reload:" msgstr "Niet in staat om te herladen:" -#: src/slic3r/GUI/Plater.cpp:3817 +#: src/slic3r/GUI/Plater.cpp:3804 msgid "Error during reload" msgstr "Fout tijdens herladen" -#: src/slic3r/GUI/Plater.cpp:3835 +#: src/slic3r/GUI/Plater.cpp:3822 msgid "Reload all from disk" msgstr "Herlaad alles van schijf" -#: src/slic3r/GUI/Plater.cpp:4130 +#: src/slic3r/GUI/Plater.cpp:4117 msgid "There are active warnings concerning sliced models:" msgstr "Er zijn actieve waarschuwingen wat betreft de slice:" -#: src/slic3r/GUI/Plater.cpp:4141 +#: src/slic3r/GUI/Plater.cpp:4128 msgid "generated warnings" msgstr "gegeven waarschuwingen" -#: src/slic3r/GUI/Plater.cpp:4472 +#: src/slic3r/GUI/Plater.cpp:4459 msgid "3D editor view" msgstr "3D-bewerkingsweergave" -#: src/slic3r/GUI/Plater.cpp:4893 +#: src/slic3r/GUI/Plater.cpp:4880 msgid "Undo / Redo is processing" msgstr "Ongedaan maken / opnieuw doen wordt verwerkt" -#: src/slic3r/GUI/Plater.cpp:4895 +#: src/slic3r/GUI/Plater.cpp:4882 #, boost-format msgid "" "Switching the printer technology from %1% to %2%.\n" @@ -7271,21 +7296,21 @@ msgstr "" "Sommige %1% presets zijn aangepast. Deze gaan verloren bij het wijzigen van " "het soort printer." -#: src/slic3r/GUI/Plater.cpp:5092 +#: src/slic3r/GUI/Plater.cpp:5079 msgid "Creating a new project while the current project is modified." msgstr "Een nieuw project aanmaken terwijl het huidige project is aangepast." -#: src/slic3r/GUI/Plater.cpp:5095 +#: src/slic3r/GUI/Plater.cpp:5082 msgid "Creating a new project while some presets are modified." msgstr "Een nieuw project aanmaken terwijl sommige presets zijn aangepast." -#: src/slic3r/GUI/Plater.cpp:5096 +#: src/slic3r/GUI/Plater.cpp:5083 msgid "You can keep presets modifications to the new project or discard them" msgstr "" "U kunt de aanpassingen in de preset behouden bij het nieuwe project, of deze " "verwijderen" -#: src/slic3r/GUI/Plater.cpp:5097 +#: src/slic3r/GUI/Plater.cpp:5084 msgid "" "You can keep presets modifications to the new project, discard them or save " "changes as new presets.\n" @@ -7296,126 +7321,126 @@ msgstr "" "Let op dat als de wijzigingen worden opgeslagen, deze niet bewaard worden in " "het nieuwe project" -#: src/slic3r/GUI/Plater.cpp:5103 +#: src/slic3r/GUI/Plater.cpp:5090 msgid "Creating a new project" msgstr "Maak een nieuw project aan" -#: src/slic3r/GUI/Plater.cpp:5137 +#: src/slic3r/GUI/Plater.cpp:5124 msgid "Load Project" msgstr "Laad project" -#: src/slic3r/GUI/Plater.cpp:5167 src/slic3r/GUI/Plater.cpp:5432 +#: src/slic3r/GUI/Plater.cpp:5154 src/slic3r/GUI/Plater.cpp:5419 msgid "Import Object" msgstr "Importeer object" -#: src/slic3r/GUI/Plater.cpp:5171 +#: src/slic3r/GUI/Plater.cpp:5158 msgid "Import Objects" msgstr "Importeer objecten" -#: src/slic3r/GUI/Plater.cpp:5243 +#: src/slic3r/GUI/Plater.cpp:5230 msgid "does not contain valid gcode." msgstr "bevat geen geldige G-code." -#: src/slic3r/GUI/Plater.cpp:5244 +#: src/slic3r/GUI/Plater.cpp:5231 msgid "Error while loading .gcode file" -msgstr "Probleem bij het laden van het gcode-bestand" +msgstr "Probleem bij het laden van het .gcode-bestand" -#: src/slic3r/GUI/Plater.cpp:5297 +#: src/slic3r/GUI/Plater.cpp:5284 #, c-format, boost-format msgid "%s - Drop project file" msgstr "%s - Plaats projectbestand" -#: src/slic3r/GUI/Plater.cpp:5304 +#: src/slic3r/GUI/Plater.cpp:5291 msgid "Open as project" msgstr "Open als project" -#: src/slic3r/GUI/Plater.cpp:5305 +#: src/slic3r/GUI/Plater.cpp:5292 msgid "Import geometry only" msgstr "Importeer alleen het model" -#: src/slic3r/GUI/Plater.cpp:5306 +#: src/slic3r/GUI/Plater.cpp:5293 msgid "Import config only" msgstr "Importeer alleen de configuratie" -#: src/slic3r/GUI/Plater.cpp:5309 +#: src/slic3r/GUI/Plater.cpp:5296 msgid "Select an action to apply to the file" msgstr "Selecteer een commando om toe te passen op het bestand" -#: src/slic3r/GUI/Plater.cpp:5314 +#: src/slic3r/GUI/Plater.cpp:5301 msgid "Action" -msgstr "Commando" +msgstr "Actie" -#: src/slic3r/GUI/Plater.cpp:5330 +#: src/slic3r/GUI/Plater.cpp:5317 msgid "Don't show again" msgstr "Laat niet meer zien" -#: src/slic3r/GUI/Plater.cpp:5371 +#: src/slic3r/GUI/Plater.cpp:5358 msgid "You can open only one .gcode file at a time." -msgstr "Je kunt maar één gcode-bestand tegelijk openen." +msgstr "Je kunt maar één .gcode-bestand tegelijk openen." -#: src/slic3r/GUI/Plater.cpp:5372 +#: src/slic3r/GUI/Plater.cpp:5359 msgid "Drag and drop G-code file" msgstr "Versleep en plaats G-code-bestand" -#: src/slic3r/GUI/Plater.cpp:5454 +#: src/slic3r/GUI/Plater.cpp:5441 msgid "Load File" msgstr "Laad bestand" -#: src/slic3r/GUI/Plater.cpp:5459 +#: src/slic3r/GUI/Plater.cpp:5446 msgid "Load Files" msgstr "Laad bestanden" -#: src/slic3r/GUI/Plater.cpp:5509 +#: src/slic3r/GUI/Plater.cpp:5496 msgid "All objects will be removed, continue?" msgstr "Alle objecten worden verwijderd. Doorgaan?" -#: src/slic3r/GUI/Plater.cpp:5520 +#: src/slic3r/GUI/Plater.cpp:5507 msgid "Delete Selected Objects" msgstr "Verwijder geselecteerde objecten" -#: src/slic3r/GUI/Plater.cpp:5529 +#: src/slic3r/GUI/Plater.cpp:5516 msgid "Increase Instances" msgstr "Verhoog aantal instanties" -#: src/slic3r/GUI/Plater.cpp:5563 +#: src/slic3r/GUI/Plater.cpp:5550 msgid "Decrease Instances" msgstr "Verlaag aantal instanties" -#: src/slic3r/GUI/Plater.cpp:5614 +#: src/slic3r/GUI/Plater.cpp:5601 msgid "Enter the number of copies:" msgstr "Voer het aantal kopieën in:" -#: src/slic3r/GUI/Plater.cpp:5615 +#: src/slic3r/GUI/Plater.cpp:5602 msgid "Copies of the selected object" msgstr "Kopieën van het geselecteerde object" -#: src/slic3r/GUI/Plater.cpp:5619 +#: src/slic3r/GUI/Plater.cpp:5606 #, c-format, boost-format msgid "Set numbers of copies to %d" msgstr "Stel aantal kopieën in voor %d" -#: src/slic3r/GUI/Plater.cpp:5697 +#: src/slic3r/GUI/Plater.cpp:5684 msgid "Cut by Plane" msgstr "Snij met behulp van vlak" -#: src/slic3r/GUI/Plater.cpp:5757 +#: src/slic3r/GUI/Plater.cpp:5744 msgid "Save G-code file as:" -msgstr "G-code-bestand opslaan als:" +msgstr ".gcode-bestand opslaan als:" -#: src/slic3r/GUI/Plater.cpp:5757 +#: src/slic3r/GUI/Plater.cpp:5744 msgid "Save SL1 / SL1S file as:" msgstr "SL1 / SL1S bestand opslaan als:" -#: src/slic3r/GUI/Plater.cpp:5766 +#: src/slic3r/GUI/Plater.cpp:5753 msgid "The provided file name is not valid." msgstr "De gegeven naam is niet geldig." -#: src/slic3r/GUI/Plater.cpp:5767 +#: src/slic3r/GUI/Plater.cpp:5754 msgid "The following characters are not allowed by a FAT file system:" msgstr "" "De volgende karakters worden niet toegestaan in een FAT-bestandssysteem:" -#: src/slic3r/GUI/Plater.cpp:5957 +#: src/slic3r/GUI/Plater.cpp:5944 msgid "" "The plater is empty.\n" "Do you want to save the project?" @@ -7423,15 +7448,15 @@ msgstr "" "Het bed is leeg.\n" "Wilt u toch het project opslaan?" -#: src/slic3r/GUI/Plater.cpp:5957 +#: src/slic3r/GUI/Plater.cpp:5944 msgid "Save project" msgstr "Project opslaan" -#: src/slic3r/GUI/Plater.cpp:6543 +#: src/slic3r/GUI/Plater.cpp:6530 msgid "Export" msgstr "Exporteer" -#: src/slic3r/GUI/Plater.cpp:6575 +#: src/slic3r/GUI/Plater.cpp:6562 msgid "" "Custom supports, seams and multimaterial painting were removed after " "repairing the mesh." @@ -7439,7 +7464,7 @@ msgstr "" "Aangepaste supports, naden en multi-material schilderingen zijn verwijderd " "bij het repareren van de mesh." -#: src/slic3r/GUI/Plater.cpp:6689 +#: src/slic3r/GUI/Plater.cpp:6676 msgid "Paste From Clipboard" msgstr "Plak van klembord" @@ -7488,7 +7513,7 @@ msgstr "" #: src/slic3r/GUI/Preferences.cpp:148 msgid "Export sources full pathnames to 3mf and amf" -msgstr "Exporteer de volledige padnamen naar 3MF- en AMF-bestanden" +msgstr "Exporteer de volledige padnamen naar .3MF- en .AMF-bestanden" #: src/slic3r/GUI/Preferences.cpp:150 msgid "" @@ -7501,13 +7526,13 @@ msgstr "" #: src/slic3r/GUI/Preferences.cpp:159 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" -"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om 3MF-" +"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om .3MF-" "bestanden te openen." #: src/slic3r/GUI/Preferences.cpp:166 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" -"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om STL-" +"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om .STL-" "bestanden te openen." #: src/slic3r/GUI/Preferences.cpp:177 @@ -7536,7 +7561,7 @@ msgstr "" #: src/slic3r/GUI/Preferences.cpp:190 msgid "Show incompatible print and filament presets" -msgstr "Toon niet geschikte print- en filamentpresets" +msgstr "Toon niet compatibele print- en filamentpresets" #: src/slic3r/GUI/Preferences.cpp:192 msgid "" @@ -7544,7 +7569,7 @@ msgid "" "even if they are marked as incompatible with the active printer" msgstr "" "Als dit aan staat worden de print- en filamentpresets getoond in de presets-" -"editor, zelfs als ze als niet geschikt voor de actieve printer zijn " +"editor, zelfs als ze als niet compatibel met de actieve printer zijn " "gemarkeerd" #: src/slic3r/GUI/Preferences.cpp:200 @@ -7591,6 +7616,9 @@ msgid "" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" +"Vraag altijd naar niet-opgeslagen wijzigingen in het project als:\n" +"- PrusaSlicer afgesloten wordt,\n" +"- Een nieuw project wordt geladen of aangemaakt" #: src/slic3r/GUI/Preferences.cpp:233 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:897 @@ -7598,6 +7626,8 @@ msgid "" "Ask to save unsaved changes in presets when closing the application or when " "loading a new project" msgstr "" +"Vraag om niet-opgeslagen wijziging op te slaan in presets bij het sluiten " +"van het programma of het laden van een nieuw project" #: src/slic3r/GUI/Preferences.cpp:235 msgid "" @@ -7605,26 +7635,37 @@ msgid "" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" +"Vraag altijd naar niet-opgeslagen wijzigingen in presets als:\n" +"- PrusaSlicer afgesloten wordt terwijl presets zijn gewijzigd,\n" +"- Een nieuw project wordt geladen terwijl sommige presets zijn gewijzigd" #: src/slic3r/GUI/Preferences.cpp:242 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:896 msgid "Ask for unsaved changes in presets when selecting new preset" msgstr "" +"Vraag naar niet-opgeslagen wijzigingen in presets bij het selecteren van een " +"nieuwe preset" #: src/slic3r/GUI/Preferences.cpp:244 msgid "" "Always ask for unsaved changes in presets when selecting new preset or " "resetting a preset" msgstr "" +"Vraag altijd naar niet-opgeslagen wijzigingen in presets bij het resetten " +"van een preset of het selecteren van een nieuwe preset" #: src/slic3r/GUI/Preferences.cpp:249 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:895 msgid "Ask for unsaved changes in presets when creating new project" msgstr "" +"Vraag naar niet-opgeslagen wijzigingen in presets bij het aanmaken van een " +"nieuw project" #: src/slic3r/GUI/Preferences.cpp:251 msgid "Always ask for unsaved changes in presets when creating new project" msgstr "" +"Vraag altijd naar niet-opgeslagen wijzigingen in presets bij het aanmaken " +"van een new project" #: src/slic3r/GUI/Preferences.cpp:258 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" @@ -7640,16 +7681,16 @@ msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 msgid "Use Retina resolution for the 3D scene" -msgstr "Gebruik hoge resolutie voor de 3D-scène" +msgstr "Gebruik hoge resolutie voor de modelweergave" #: src/slic3r/GUI/Preferences.cpp:270 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" -"Als dit is ingeschakeld zal de 3D-scène worden gerenderd in hoge resolutie. " -"Als u problemen ondervindt met de prestaties kan het uitschakelen van deze " -"optie mogelijk helpen." +"Als dit is ingeschakeld zal de modelweergave worden gerenderd in hoge " +"resolutie. Als u problemen ondervindt met de prestaties kan het uitschakelen " +"van deze optie mogelijk helpen." #: src/slic3r/GUI/Preferences.cpp:280 src/slic3r/GUI/Preferences.cpp:282 msgid "Show splash screen" @@ -7658,6 +7699,8 @@ msgstr "Toon startscherm" #: src/slic3r/GUI/Preferences.cpp:289 msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" +"Als dit is ingeschakeld zal PrusaSlicer openen op de positie waarop die is " +"afgesloten" #: src/slic3r/GUI/Preferences.cpp:295 msgid "Clear Undo / Redo stack on new project" @@ -7730,8 +7773,8 @@ msgid "" "in preview, apply to the whole gcode." msgstr "" "Sta toe om wijzigingen van de opeenvolgende schuif in de voorbeeldweergave " -"alleen toe te passen op de toplaag. Als dit uitstaat worden wijzigingen " -"toegepast op de hele G-code." +"alleen toe te passen op de toplaag. Als dit is uitgeschakeld worden " +"wijzigingen toegepast op de hele G-code." #: src/slic3r/GUI/Preferences.cpp:375 msgid "Show sidebar collapse/expand button" @@ -7743,11 +7786,12 @@ msgid "" "right corner of the 3D Scene" msgstr "" "Als dit is ingeschakeld zal de knop om de zijbalk in te klappen getoond " -"worden in de rechterbovenhoek van de 3D-bewerkingsweergave" +"worden in de rechterbovenhoek van de modelweergave" #: src/slic3r/GUI/Preferences.cpp:384 msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." msgstr "" +"Als dit is ingeschakeld zal PrusaSlicer hyperlinks niet openen in uw browser." #: src/slic3r/GUI/Preferences.cpp:391 msgid "Use colors for axes values in Manipulation panel" @@ -7758,8 +7802,8 @@ msgid "" "If enabled, the axes names and axes values will be colorized according to " "the axes colors. If disabled, old UI will be used." msgstr "" -"Als dit aanstaat worden namen en waarden van assen gekleurd volgens de kleur " -"van de as. Als dit uitstaat wordt de oude interface gebruikt." +"Als dit is ingeschakeld worden namen en waarden van assen gekleurd volgens " +"de kleur van de as. Als dit uitstaat wordt de oude interface gebruikt." #: src/slic3r/GUI/Preferences.cpp:399 msgid "Order object volumes by types" @@ -7772,8 +7816,8 @@ msgid "" "Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " "Modifiers. But one of the model parts have to be on the first place." msgstr "" -"Als dit aanstaat worden volumes altijd gesorteerd binnen een object. De " -"juiste volgorde is Model - Negatieve volumes - Modificators - " +"Als dit is ingeschakeld worden volumes altijd gesorteerd binnen een object. " +"De juiste volgorde is Model - Negatieve volumes - Modificators - " "Supportblokkering - Supportforcering. Als dit uitstaat kan u de onderdelen " "zelf schikken. Een van de modellen moet op de eerste plaats staan." @@ -7786,8 +7830,8 @@ msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " "will be used." msgstr "" -"Als dit aanstaat worden instellingentabs geplaatst als menu-onderdelen. Als " -"dit uitstaat wordt de oude interface gebruikt." +"Als dit is ingeschakeld worden instellingentabs geplaatst als menu-" +"onderdelen. Als dit uitstaat wordt de oude interface gebruikt." #: src/slic3r/GUI/Preferences.cpp:419 msgid "Show \"Tip of the day\" notification after start" @@ -7795,7 +7839,7 @@ msgstr "Toon \"Tip van de dag\" melding bij het starten" #: src/slic3r/GUI/Preferences.cpp:421 msgid "If enabled, useful hints are displayed at startup." -msgstr "Als dit aanstaat worden handige tips getoond bij het starten." +msgstr "Als dit is ingeschakeld worden handige tips getoond bij het starten." #: src/slic3r/GUI/Preferences.cpp:427 msgid "Notify about new releases" @@ -7833,7 +7877,8 @@ msgstr "Gebruik omgevingskaart" #: src/slic3r/GUI/Preferences.cpp:478 msgid "If enabled, renders object using the environment map." -msgstr "Als dit aanstaat worden objecten gerenderd met de omgevingskaart." +msgstr "" +"Als dit is ingeschakeld worden objecten gerenderd met de omgevingskaart." #: src/slic3r/GUI/Preferences.cpp:491 msgid "Dark mode (experimental)" @@ -7847,8 +7892,8 @@ msgstr "Gebruik donkere modus" msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" -"Als dit aan staat worden kleuren van de donkere modus gebruikt. De oude " -"kleuren worden gebruikt als dit uit staat." +"Als dit is ingeschakeld worden kleuren van de donkere modus gebruikt. De " +"oude kleuren worden gebruikt als dit uit staat." #: src/slic3r/GUI/Preferences.cpp:507 msgid "Use system menu for application" @@ -7860,7 +7905,7 @@ msgid "" "but on some combination of display scales it can looks ugly. If disabled, " "old UI will be used." msgstr "" -"Als dit aan staat worden de standaard Windows-menukleuren gebruikt,\n" +"Als dit is ingeschakeld worden de standaard Windows-menukleuren gebruikt,\n" "maar op sommige combinaties van displaygroottes kan die lelijk lijken. Als " "dit uitstaat wordt de oude interface gebruikt." @@ -7923,7 +7968,7 @@ msgstr "Presets van de gebruiker" #: src/slic3r/GUI/PresetComboBoxes.cpp:302 msgid "Incompatible presets" -msgstr "Ongeschikte presets" +msgstr "Niet compatibele presets" #: src/slic3r/GUI/PresetComboBoxes.cpp:337 #, boost-format @@ -8268,11 +8313,11 @@ msgstr "Fout: geen ramming" #: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114 #: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:995 -#: src/libslic3r/PrintConfig.cpp:1010 src/libslic3r/PrintConfig.cpp:3266 -#: src/libslic3r/PrintConfig.cpp:3275 src/libslic3r/PrintConfig.cpp:3284 -#: src/libslic3r/PrintConfig.cpp:3425 src/libslic3r/PrintConfig.cpp:3433 -#: src/libslic3r/PrintConfig.cpp:3441 src/libslic3r/PrintConfig.cpp:3448 -#: src/libslic3r/PrintConfig.cpp:3456 src/libslic3r/PrintConfig.cpp:3464 +#: src/libslic3r/PrintConfig.cpp:1010 src/libslic3r/PrintConfig.cpp:3265 +#: src/libslic3r/PrintConfig.cpp:3274 src/libslic3r/PrintConfig.cpp:3283 +#: src/libslic3r/PrintConfig.cpp:3424 src/libslic3r/PrintConfig.cpp:3432 +#: src/libslic3r/PrintConfig.cpp:3440 src/libslic3r/PrintConfig.cpp:3447 +#: src/libslic3r/PrintConfig.cpp:3455 src/libslic3r/PrintConfig.cpp:3463 msgid "s" msgstr "s" @@ -8281,7 +8326,7 @@ msgid "Volumetric speed" msgstr "Volumetrische snelheid" #: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:908 -#: src/libslic3r/PrintConfig.cpp:1801 +#: src/libslic3r/PrintConfig.cpp:1800 msgid "mm³/s" msgstr "mm³/s" @@ -8322,7 +8367,7 @@ msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" -"Preset met de naam \"%1%\" bestaat al en is incompatibel met de " +"Preset met de naam \"%1%\" bestaat al en is niet compatibel met de " "geselecteerde printer." #: src/slic3r/GUI/SavePresetDialog.cpp:137 @@ -8460,7 +8505,7 @@ msgid "" msgstr "" "Als we uw hardware, besturingssysteem, etc. kennen, zal dit ons erg helpen " "bij de ontwikkeling en prioritering, omdat we dan beter weten waar de focus " -"ligt, en efficiënter de tijd besteden op onderdelen die veel tijd kosten." +"ligt, en efficiënter de tijd besteden op delen die veel tijd kosten." #: src/slic3r/GUI/SendSystemInfoDialog.cpp:588 msgid "Is it safe?" @@ -8530,19 +8575,19 @@ msgstr "Kopieer van klembord" #: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:564 msgid "Compatible printers" -msgstr "Geschikte printers" +msgstr "Compatibele printers" #: src/slic3r/GUI/Tab.cpp:115 msgid "Select the printers this profile is compatible with." -msgstr "Selecteer de printers die geschikt voor dit profiel zijn." +msgstr "Selecteer de printers die compatibel zijn met dit profiel." #: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:579 msgid "Compatible print profiles" -msgstr "Geschikte printprofielen" +msgstr "Compatibele printprofielen" #: src/slic3r/GUI/Tab.cpp:121 msgid "Select the print profiles this profile is compatible with." -msgstr "Selecteer de printprofielen die geschikt voor dit profiel zijn." +msgstr "Selecteer de printprofielen die compatibel zijn met dit profiel." #: src/slic3r/GUI/Tab.cpp:216 msgid "Compare this preset with some another" @@ -8671,7 +8716,7 @@ msgstr "Verticale shells" msgid "Horizontal shells" msgstr "Horizontale shells" -#: src/slic3r/GUI/Tab.cpp:1466 src/libslic3r/PrintConfig.cpp:2386 +#: src/slic3r/GUI/Tab.cpp:1466 src/libslic3r/PrintConfig.cpp:2385 msgid "Solid layers" msgstr "Dichte lagen" @@ -8725,7 +8770,7 @@ msgstr "Automatische snelheid (geavanceerd)" #: src/slic3r/GUI/Tab.cpp:1615 msgid "Pressure equalizer (experimental)" -msgstr "" +msgstr "Drukverdeler (experimenteel)" #: src/slic3r/GUI/Tab.cpp:1619 msgid "Multiple Extruders" @@ -8753,7 +8798,7 @@ msgstr "Overige" #: src/slic3r/GUI/Tab.cpp:1674 msgid "Arachne perimeter generator" -msgstr "" +msgstr "Arachne-perimetergeneratie" #: src/slic3r/GUI/Tab.cpp:1682 src/slic3r/GUI/Tab.cpp:4731 msgid "Output options" @@ -8771,7 +8816,7 @@ msgstr "Extruderruimte" msgid "Output file" msgstr "Outputbestand" -#: src/slic3r/GUI/Tab.cpp:1709 src/libslic3r/PrintConfig.cpp:2011 +#: src/slic3r/GUI/Tab.cpp:1709 src/libslic3r/PrintConfig.cpp:2010 msgid "Post-processing scripts" msgstr "Scripts voor nabewerking" @@ -8839,8 +8884,8 @@ msgstr "Bed" msgid "Cooling" msgstr "Koeling" -#: src/slic3r/GUI/Tab.cpp:2001 src/libslic3r/PrintConfig.cpp:1913 -#: src/libslic3r/PrintConfig.cpp:2963 +#: src/slic3r/GUI/Tab.cpp:2001 src/libslic3r/PrintConfig.cpp:1912 +#: src/libslic3r/PrintConfig.cpp:2962 msgid "Enable" msgstr "Toestaan" @@ -8874,13 +8919,13 @@ msgstr "Ramming-instellingen" #: src/slic3r/GUI/Tab.cpp:2086 src/slic3r/GUI/Tab.cpp:2407 #: src/slic3r/GUI/Tab.cpp:4261 src/libslic3r/GCode.cpp:733 -#: src/libslic3r/PrintConfig.cpp:2469 +#: src/libslic3r/PrintConfig.cpp:2468 msgid "Custom G-code" msgstr "Custom G-code" #: src/slic3r/GUI/Tab.cpp:2087 src/slic3r/GUI/Tab.cpp:2408 -#: src/libslic3r/GCode.cpp:707 src/libslic3r/PrintConfig.cpp:2419 -#: src/libslic3r/PrintConfig.cpp:2434 +#: src/libslic3r/GCode.cpp:707 src/libslic3r/PrintConfig.cpp:2418 +#: src/libslic3r/PrintConfig.cpp:2433 msgid "Start G-code" msgstr "Start G-code" @@ -8906,7 +8951,7 @@ msgid "" "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" -"Let op dat alle parameters van deze groep zijn verplaatst naar de fysieke " +"Let op dat alle parameters van deze groep zijn verplaatst naar de fysieke-" "printerinstellingen (zie wijzigingslogboek).\n" "\n" "Een nieuw fysieke printerprofiel wordt aangemaakt door te klikken op het " @@ -8942,7 +8987,7 @@ msgstr "" "eerste extruder?" #: src/slic3r/GUI/Tab.cpp:2335 src/slic3r/GUI/Tab.cpp:2779 -#: src/libslic3r/PrintConfig.cpp:1877 +#: src/libslic3r/PrintConfig.cpp:1876 msgid "Nozzle diameter" msgstr "Nozzlediameter" @@ -8952,12 +8997,12 @@ msgid "Before layer change G-code" msgstr "G-code die komt vóór de laagwisseling" #: src/slic3r/GUI/Tab.cpp:2438 src/libslic3r/GCode.cpp:710 -#: src/libslic3r/PrintConfig.cpp:1603 +#: src/libslic3r/PrintConfig.cpp:1602 msgid "After layer change G-code" msgstr "G-code die komt na de laagwisseling" #: src/slic3r/GUI/Tab.cpp:2448 src/libslic3r/GCode.cpp:711 -#: src/libslic3r/PrintConfig.cpp:2846 +#: src/libslic3r/PrintConfig.cpp:2845 msgid "Tool change G-code" msgstr "Toolwisseling G-code" @@ -8970,7 +9015,7 @@ msgid "Color Change G-code" msgstr "Kleurwissel G-code" #: src/slic3r/GUI/Tab.cpp:2477 src/libslic3r/GCode.cpp:714 -#: src/libslic3r/PrintConfig.cpp:2460 +#: src/libslic3r/PrintConfig.cpp:2459 msgid "Pause Print G-code" msgstr "Pauzeer print G-code" @@ -8999,11 +9044,11 @@ msgid "Exposure" msgstr "Belichtingstijd" #: src/slic3r/GUI/Tab.cpp:2619 src/slic3r/GUI/Tab.cpp:2706 -#: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1667 -#: src/libslic3r/PrintConfig.cpp:1684 src/libslic3r/PrintConfig.cpp:1701 -#: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1727 -#: src/libslic3r/PrintConfig.cpp:1737 src/libslic3r/PrintConfig.cpp:1750 -#: src/libslic3r/PrintConfig.cpp:1760 +#: src/libslic3r/PrintConfig.cpp:1631 src/libslic3r/PrintConfig.cpp:1666 +#: src/libslic3r/PrintConfig.cpp:1683 src/libslic3r/PrintConfig.cpp:1700 +#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1726 +#: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1749 +#: src/libslic3r/PrintConfig.cpp:1759 msgid "Machine limits" msgstr "Machinelimieten" @@ -9058,7 +9103,7 @@ msgstr "Positie (voor multi-extruderprinters)" #: src/slic3r/GUI/Tab.cpp:2812 msgid "Only lift Z" -msgstr "Beweeg alleen Z omhoog" +msgstr "Beweeg alleen omhoog" #: src/slic3r/GUI/Tab.cpp:2825 msgid "" @@ -9178,31 +9223,31 @@ msgstr "Stel in" #: src/slic3r/GUI/Tab.cpp:3952 msgid "Find" -msgstr "Zoeken" +msgstr "Zoek" #: src/slic3r/GUI/Tab.cpp:3953 msgid "Replace with" -msgstr "" +msgstr "Vervang met" #: src/slic3r/GUI/Tab.cpp:4042 msgid "Regular expression" -msgstr "" +msgstr "Reguliere uitdrukking" #: src/slic3r/GUI/Tab.cpp:4046 msgid "Case insensitive" -msgstr "" +msgstr "Hoofdletterongevoelig" #: src/slic3r/GUI/Tab.cpp:4050 msgid "Whole word" -msgstr "Alleen hele woorden" +msgstr "Geheel woord" #: src/slic3r/GUI/Tab.cpp:4054 msgid "Match single line" -msgstr "" +msgstr "Laat overeenkomen met enkele lijn" #: src/slic3r/GUI/Tab.cpp:4157 msgid "Are you sure you want to delete all substitutions?" -msgstr "" +msgstr "Weet je zeker dat je alle substituties wilt verwijderen?" #: src/slic3r/GUI/Tab.cpp:4289 msgid "" @@ -9402,11 +9447,11 @@ msgstr "" "\"%1%\" is uitgeschakeld omdat \"%2%\" aanstaat in \"%3%\"-categorie.\n" "Om \"%1%\" aan te zetten moet \"%2%\" uit staan" -#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3693 +#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3692 msgid "Object elevation" msgstr "Objectverhoging" -#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3795 +#: src/slic3r/GUI/Tab.cpp:4774 src/libslic3r/PrintConfig.cpp:3794 msgid "Pad around object" msgstr "Basisplaat rondom object" @@ -9462,12 +9507,16 @@ msgid "" "You will not be asked about the unsaved changes in presets the next time you " "create new project" msgstr "" +"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de " +"volgende keer als u een nieuw project aanmaakt" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "" "You will not be asked about the unsaved changes in presets the next time you " "switch a preset" msgstr "" +"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de " +"volgende keer als u wisselt van preset" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:900 msgid "" @@ -9476,6 +9525,10 @@ msgid "" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" +"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de " +"volgende keer als:\n" +"- PrusaSlicer afgesloten wordt terwijl sommige presets zijn aangepast;\n" +"- een nieuw project wordt geladen terwijl sommige presets zijn aangepast" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:903 msgid "PrusaSlicer will remember your action." @@ -9546,7 +9599,7 @@ msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" -"Preset \"%1%\" is niet geschikt voor het nieuwe printerprofiel en heeft de " +"Preset \"%1%\" is niet compatibel met het nieuwe printerprofiel en heeft de " "volgende niet-opgeslagen wijzigingen:" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235 @@ -9555,7 +9608,7 @@ msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" -"Preset \"%1%\" is niet geschikt voor het nieuwe printprofiel en heeft de " +"Preset \"%1%\" is niet compatibel met het nieuwe printprofiel en heeft de " "volgende niet-opgeslagen wijzigingen:" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283 @@ -9565,11 +9618,11 @@ msgstr "Aantal extruders" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1456 msgid "Select presets to compare" -msgstr "" +msgstr "Selecteer presets om te vergelijken" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1505 msgid "Show all presets (including incompatible)" -msgstr "Toon alle presets (inclusief incompatibele)" +msgstr "Toon alle presets (inclusief niet compatibele)" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1520 msgid "Left Preset Value" @@ -9627,7 +9680,7 @@ msgstr "Nieuwe versie:" #: src/slic3r/GUI/UpdateDialogs.cpp:52 msgid "Changelog & Download" -msgstr "" +msgstr "Wijzigingslogboek downloaden" #: src/slic3r/GUI/UpdateDialogs.cpp:59 src/slic3r/GUI/UpdateDialogs.cpp:133 #: src/slic3r/GUI/UpdateDialogs.cpp:191 @@ -9727,7 +9780,7 @@ msgstr "%s afsluiten" #: src/slic3r/GUI/UpdateDialogs.cpp:213 #, c-format, boost-format msgid "%s configuration is incompatible" -msgstr "%s configuratie is niet geschikt" +msgstr "%s configuratie is niet compatibel" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, c-format, boost-format @@ -9741,7 +9794,7 @@ msgid "" "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" -"Deze versie van %s is niet geschikt voor de huidig geïnstalleerde " +"Deze versie van %s is niet compatibel voor de huidig geïnstalleerde " "configuratiebundels.\n" "Dit kan mogelijk ontstaan als resultaat van het draaien van een ouder %s na " "het gebruik van een nieuwere.\n" @@ -9758,7 +9811,7 @@ msgstr "Deze %s versie: %s" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" -msgstr "Ongeschikte bundels:" +msgstr "Niet compatibele bundels:" #: src/slic3r/GUI/UpdateDialogs.cpp:246 msgid "Re-configure" @@ -9994,27 +10047,27 @@ msgstr "Opslaan van mesh in 3MF-container mislukt." #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Export of a temporary 3mf file failed" -msgstr "Exporteren van tijdelijk 3MF-bestand mislukt" +msgstr "Exporteren van tijdelijk .3MF-bestand mislukt" #: src/slic3r/Utils/FixModelByWin10.cpp:394 msgid "Import of the repaired 3mf file failed" -msgstr "Importeren van het gerepareerde 3MF-bestand mislukt" +msgstr "Importeren van het gerepareerde .3MF-bestand mislukt" #: src/slic3r/Utils/FixModelByWin10.cpp:396 msgid "Repaired 3MF file does not contain any object" -msgstr "Gerepareerd 3MF-bestand bevat geen object" +msgstr "Gerepareerd .3MF-bestand bevat geen object" #: src/slic3r/Utils/FixModelByWin10.cpp:398 msgid "Repaired 3MF file contains more than one object" -msgstr "Gerepareerd 3MF-bestand bevat meer dan één object" +msgstr "Gerepareerd .3MF-bestand bevat meer dan één object" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Repaired 3MF file does not contain any volume" -msgstr "Gerepareerd 3MF-bestand bevat geen volume" +msgstr "Gerepareerd .3MF-bestand bevat geen volume" #: src/slic3r/Utils/FixModelByWin10.cpp:402 msgid "Repaired 3MF file contains more than one volume" -msgstr "Gerepareerd 3MF-bestand bevat meer dan één volume" +msgstr "Gerepareerd .3MF-bestand bevat meer dan één volume" #: src/slic3r/Utils/FixModelByWin10.cpp:412 msgid "Model repair finished" @@ -10144,7 +10197,7 @@ msgstr "" #: src/slic3r/Utils/Process.cpp:157 msgid "Open G-code file:" -msgstr "Open G-code bestand:" +msgstr "Open .gcode-bestand:" #: src/slic3r/Utils/Repetier.cpp:84 msgid "Connection to Repetier works correctly." @@ -10191,24 +10244,26 @@ msgstr "" #: src/slic3r/Config/Snapshot.cpp:584 msgid "Taking a configuration snapshot failed." -msgstr "" +msgstr "Configuratiesnapshot nemen is mislukt." #: src/slic3r/Config/Snapshot.cpp:598 msgid "" "PrusaSlicer has encountered an error while taking a configuration snapshot." msgstr "" +"PrusaSlicer heeft een fout opgelopen bij het maken van een " +"configuratiesnapshot." #: src/slic3r/Config/Snapshot.cpp:599 msgid "PrusaSlicer error" -msgstr "" +msgstr "PrusaSlicer-fout" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Continue" -msgstr "" +msgstr "Doorgaan" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Abort" -msgstr "" +msgstr "Stoppen" #: src/libslic3r/GCode.cpp:539 msgid "There is an object with no extrusions in the first layer." @@ -10258,7 +10313,7 @@ msgstr "" #: src/libslic3r/GCode.cpp:1200 src/libslic3r/GCode.cpp:1211 msgid "No extrusions were generated for objects." -msgstr "" +msgstr "Geen extrusies werden gegenereerd voor de objecten." #: src/libslic3r/GCode.cpp:1406 msgid "" @@ -10286,8 +10341,8 @@ msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" -"Het geselecteerde 3MF-bestand is opgeslagen in een nieuwere versie van %1% " -"en is niet geschikt." +"Het geselecteerde .3MF-bestand is opgeslagen in een nieuwere versie van %1% " +"en is niet compatibel." #: src/libslic3r/Format/3mf.cpp:1746 msgid "" @@ -10319,8 +10374,8 @@ msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" -"Het geselecteerde AMF-bestand is opgeslagen in een nieuwere versie van %1% " -"en is niet geschikt." +"Het geselecteerde .AMF-bestand is opgeslagen in een nieuwere versie van %1% " +"en is niet compatibel." #: src/libslic3r/GCode/PostProcessor.cpp:289 #, boost-format @@ -10335,10 +10390,10 @@ msgid "" msgstr "" "Nabewerkscript %1% gaf een fout.\n" "\n" -"Het nabewerkscript zou de het gcode-bestand %2% moeten aanpassen, maar het " +"Het nabewerkscript zou de het .gcode-bestand %2% moeten aanpassen, maar het " "bestand is verwijderd en waarschijnlijk opgeslagen onder een andere naam.\n" "Pas alstublieft het nabewerkscript aan om de G-code aan te passen en " -"raadpleeg de handleiding over de benoeming van het nabewerkte gcode-" +"raadpleeg de handleiding over de benoeming van het nabewerkte .gcode-" "bestand.\n" #: src/libslic3r/miniz_extension.cpp:91 @@ -10650,18 +10705,25 @@ msgid "" "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to " "layer_gcode." msgstr "" +"Relatieve extruderwaarden vereist het resetten van de extruderpositie op " +"elke laag om decimale onnauwkeurigheid te voorkomen. Voeg \"G92 E0\" toe aan " +"layer_gcode." #: src/libslic3r/Print.cpp:679 msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" +"\"G92 E0\" gevonden in before_layer_gcode, wat niet compatibel is met " +"absolute positionering." #: src/libslic3r/Print.cpp:681 msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" +"\"G92 E0\" gevonden in layer_gcode, wat niet compatibel is met absolute " +"positionering." #: src/libslic3r/Print.cpp:823 msgid "Infilling layers" @@ -10849,18 +10911,20 @@ msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Afbeeldingsgrootte wordt opgeslagen in de .gcode en .sl1 / .sl1s bestanden " -"in het formaat: \"XxY, XxY, ...\"" +"Afbeeldingsgrootte wordt opgeslagen in de .gcode en .sl1/.sl1s-bestanden in " +"het formaat: \"XxY, XxY, ...\"" #: src/libslic3r/PrintConfig.cpp:275 msgid "Format of G-code thumbnails" -msgstr "" +msgstr "Bestandstype van G-code-voorbeelden" #: src/libslic3r/PrintConfig.cpp:276 msgid "" "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " "QOI for low memory firmware" msgstr "" +"Bestandstype van G-code-voorbeelden: PNG voor de beste kwaliteit, JPG voor " +"kleinste bestand, QOI voor firmware met weinig geheugen" #: src/libslic3r/PrintConfig.cpp:287 msgid "" @@ -10893,7 +10957,7 @@ msgid "" "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" -"PrusaSlicer kan G-code-bestanden uploaden naar een printerhost. Dit tekstvak " +"PrusaSlicer kan .gcode-bestanden uploaden naar een printerhost. Dit tekstvak " "bevat de hostnaam, IP-adres of URL van de printerhostinstantie. Als de " "printerhost achter HAProxy met basis-authorisatie aan staat, kan toegang " "worden verkregen door gebruikersnaam en wachtwoord in te voeren in bij de " @@ -10908,8 +10972,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" -"PrusaSlicer kan gcode-bestanden naar een printerhost uploaden. Dit veld moet " -"de API-key of het wachtwoord voor authenticatie bevatten." +"PrusaSlicer kan .gcode-bestanden naar een printerhost uploaden. Dit veld " +"moet de API-key of het wachtwoord voor authenticatie bevatten." #: src/libslic3r/PrintConfig.cpp:322 msgid "Name of the printer" @@ -10961,7 +11025,7 @@ msgstr "API-sleutel" #: src/libslic3r/PrintConfig.cpp:374 msgid "HTTP digest" -msgstr "HTTP authenticatie" +msgstr "HTTP weergave" #: src/libslic3r/PrintConfig.cpp:394 msgid "Avoid crossing perimeters" @@ -10998,7 +11062,7 @@ msgstr "" msgid "mm or % (zero to disable)" msgstr "mm of % (stel in op 0 om uit te zetten)" -#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:2808 +#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:2807 msgid "Other layers" msgstr "Overige lagen" @@ -11076,10 +11140,10 @@ msgstr "" "op 0, wordt de acceleratie-instelling voor bruggen uitgezet." #: src/libslic3r/PrintConfig.cpp:467 src/libslic3r/PrintConfig.cpp:638 -#: src/libslic3r/PrintConfig.cpp:1188 src/libslic3r/PrintConfig.cpp:1197 -#: src/libslic3r/PrintConfig.cpp:1397 src/libslic3r/PrintConfig.cpp:1690 -#: src/libslic3r/PrintConfig.cpp:1741 src/libslic3r/PrintConfig.cpp:1752 -#: src/libslic3r/PrintConfig.cpp:1762 src/libslic3r/PrintConfig.cpp:1960 +#: src/libslic3r/PrintConfig.cpp:1187 src/libslic3r/PrintConfig.cpp:1196 +#: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1689 +#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1751 +#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1959 msgid "mm/s²" msgstr "mm/s²" @@ -11097,11 +11161,11 @@ msgstr "" "automatisch berekend, anders wordt de opgegeven hoek voor alle bruggen " "gebruikt. 180° staat gelijk aan 0°." -#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:1098 -#: src/libslic3r/PrintConfig.cpp:2251 src/libslic3r/PrintConfig.cpp:2261 -#: src/libslic3r/PrintConfig.cpp:2552 src/libslic3r/PrintConfig.cpp:2793 -#: src/libslic3r/PrintConfig.cpp:3010 src/libslic3r/PrintConfig.cpp:3113 -#: src/libslic3r/PrintConfig.cpp:3667 src/libslic3r/PrintConfig.cpp:3788 +#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:1097 +#: src/libslic3r/PrintConfig.cpp:2250 src/libslic3r/PrintConfig.cpp:2260 +#: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2792 +#: src/libslic3r/PrintConfig.cpp:3009 src/libslic3r/PrintConfig.cpp:3112 +#: src/libslic3r/PrintConfig.cpp:3666 src/libslic3r/PrintConfig.cpp:3787 msgid "°" msgstr "°" @@ -11113,11 +11177,11 @@ msgstr "Ventilatorsnelheid voor bruggen" msgid "This fan speed is enforced during all bridges and overhangs." msgstr "Deze ventilatorsnelheid wordt aangehouden bij bruggen en overhanging." -#: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:1110 -#: src/libslic3r/PrintConfig.cpp:1578 src/libslic3r/PrintConfig.cpp:1770 -#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:2084 -#: src/libslic3r/PrintConfig.cpp:2143 src/libslic3r/PrintConfig.cpp:3292 -#: src/libslic3r/PrintConfig.cpp:3581 src/libslic3r/PrintConfig.cpp:3707 +#: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:1109 +#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:1769 +#: src/libslic3r/PrintConfig.cpp:1832 src/libslic3r/PrintConfig.cpp:2083 +#: src/libslic3r/PrintConfig.cpp:2142 src/libslic3r/PrintConfig.cpp:3291 +#: src/libslic3r/PrintConfig.cpp:3580 src/libslic3r/PrintConfig.cpp:3706 msgid "%" msgstr "%" @@ -11148,14 +11212,14 @@ msgstr "Printsnelheid voor bruggen." #: src/libslic3r/PrintConfig.cpp:508 src/libslic3r/PrintConfig.cpp:916 #: src/libslic3r/PrintConfig.cpp:924 src/libslic3r/PrintConfig.cpp:933 #: src/libslic3r/PrintConfig.cpp:941 src/libslic3r/PrintConfig.cpp:968 -#: src/libslic3r/PrintConfig.cpp:987 src/libslic3r/PrintConfig.cpp:1325 -#: src/libslic3r/PrintConfig.cpp:1515 src/libslic3r/PrintConfig.cpp:1597 -#: src/libslic3r/PrintConfig.cpp:1673 src/libslic3r/PrintConfig.cpp:1707 -#: src/libslic3r/PrintConfig.cpp:1719 src/libslic3r/PrintConfig.cpp:1729 -#: src/libslic3r/PrintConfig.cpp:1792 src/libslic3r/PrintConfig.cpp:1851 -#: src/libslic3r/PrintConfig.cpp:1991 src/libslic3r/PrintConfig.cpp:2218 -#: src/libslic3r/PrintConfig.cpp:2227 src/libslic3r/PrintConfig.cpp:2758 -#: src/libslic3r/PrintConfig.cpp:2908 src/libslic3r/PrintConfig.cpp:2918 +#: src/libslic3r/PrintConfig.cpp:987 src/libslic3r/PrintConfig.cpp:1324 +#: src/libslic3r/PrintConfig.cpp:1514 src/libslic3r/PrintConfig.cpp:1596 +#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1706 +#: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1728 +#: src/libslic3r/PrintConfig.cpp:1791 src/libslic3r/PrintConfig.cpp:1850 +#: src/libslic3r/PrintConfig.cpp:1990 src/libslic3r/PrintConfig.cpp:2217 +#: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2757 +#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2917 msgid "mm/s" msgstr "mm/s" @@ -11236,7 +11300,7 @@ msgstr "Hoogte waarbij de filamentwissel plaatsvindt." #: src/libslic3r/PrintConfig.cpp:570 msgid "Compatible printers condition" -msgstr "Voorwaarden geschikte printers" +msgstr "Voorwaarden compatibele printers" #: src/libslic3r/PrintConfig.cpp:571 msgid "" @@ -11246,11 +11310,11 @@ msgid "" msgstr "" "Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van " "een actief printerprofiel. Als deze aanduiding op waar staat, wordt dit " -"profiel beschouwd als geschikt voor het actieve printerprofiel." +"profiel beschouwd als compatibel voor het actieve printerprofiel." #: src/libslic3r/PrintConfig.cpp:585 msgid "Compatible print profiles condition" -msgstr "Voorwaarden geschikte printprofielen" +msgstr "Voorwaarden compatibele printprofielen" #: src/libslic3r/PrintConfig.cpp:586 msgid "" @@ -11260,7 +11324,7 @@ msgid "" msgstr "" "Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van " "een actief printprofiel. Als deze aanduiding op waar staat, wordt dit " -"profiel beschouwd als geschikt voor het actieve printprofiel." +"profiel beschouwd als compatibel met het actieve printprofiel." #: src/libslic3r/PrintConfig.cpp:603 msgid "Complete individual objects" @@ -11335,8 +11399,8 @@ msgstr "" msgid "Default print profile" msgstr "Standaard printprofiel" -#: src/libslic3r/PrintConfig.cpp:652 src/libslic3r/PrintConfig.cpp:3511 -#: src/libslic3r/PrintConfig.cpp:3522 +#: src/libslic3r/PrintConfig.cpp:652 src/libslic3r/PrintConfig.cpp:3510 +#: src/libslic3r/PrintConfig.cpp:3521 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " @@ -11422,8 +11486,8 @@ msgstr "" "Vullingspatroon voor bovenste lagen. Dit heeft alleen invloed op de bovenste " "zichtbare laag en niet de aangrenzende horizontale dichte shells." -#: src/libslic3r/PrintConfig.cpp:726 src/libslic3r/PrintConfig.cpp:1165 -#: src/libslic3r/PrintConfig.cpp:2723 src/libslic3r/PrintConfig.cpp:2740 +#: src/libslic3r/PrintConfig.cpp:726 src/libslic3r/PrintConfig.cpp:1164 +#: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2739 msgid "Rectilinear" msgstr "Rechtlijnig" @@ -11431,24 +11495,24 @@ msgstr "Rechtlijnig" msgid "Monotonic" msgstr "Monotoon" -#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:1166 +#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:1165 msgid "Aligned Rectilinear" msgstr "Parallel rechtlijnig" -#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:1172 -#: src/libslic3r/PrintConfig.cpp:2741 +#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:1171 +#: src/libslic3r/PrintConfig.cpp:2740 msgid "Concentric" msgstr "Concentrisch" -#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:1176 +#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:1175 msgid "Hilbert Curve" msgstr "Hilbert-kromme" -#: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:1177 +#: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:1176 msgid "Archimedean Chords" msgstr "Archimedes-spiraal" -#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:1178 +#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:1177 msgid "Octagram Spiral" msgstr "Octagramspiraal" @@ -11481,13 +11545,13 @@ msgstr "" "percentage, wordt dit berekend over de laagdikte." #: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:865 -#: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1422 -#: src/libslic3r/PrintConfig.cpp:1479 src/libslic3r/PrintConfig.cpp:1506 -#: src/libslic3r/PrintConfig.cpp:1980 src/libslic3r/PrintConfig.cpp:2366 -#: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2629 -#: src/libslic3r/PrintConfig.cpp:2864 src/libslic3r/PrintConfig.cpp:3086 -#: src/libslic3r/PrintConfig.cpp:3101 src/libslic3r/PrintConfig.cpp:3135 -#: src/libslic3r/PrintConfig.cpp:3147 +#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1421 +#: src/libslic3r/PrintConfig.cpp:1478 src/libslic3r/PrintConfig.cpp:1505 +#: src/libslic3r/PrintConfig.cpp:1979 src/libslic3r/PrintConfig.cpp:2365 +#: src/libslic3r/PrintConfig.cpp:2539 src/libslic3r/PrintConfig.cpp:2628 +#: src/libslic3r/PrintConfig.cpp:2863 src/libslic3r/PrintConfig.cpp:3085 +#: src/libslic3r/PrintConfig.cpp:3100 src/libslic3r/PrintConfig.cpp:3134 +#: src/libslic3r/PrintConfig.cpp:3146 msgid "mm or %" msgstr "mm of %" @@ -11502,10 +11566,10 @@ msgstr "" "perimeters. Als dit ingesteld is op 0, wordt een automatische snelheid " "genomen." -#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:1241 -#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:2325 -#: src/libslic3r/PrintConfig.cpp:2378 src/libslic3r/PrintConfig.cpp:2709 -#: src/libslic3r/PrintConfig.cpp:2878 +#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:1240 +#: src/libslic3r/PrintConfig.cpp:1251 src/libslic3r/PrintConfig.cpp:2324 +#: src/libslic3r/PrintConfig.cpp:2377 src/libslic3r/PrintConfig.cpp:2708 +#: src/libslic3r/PrintConfig.cpp:2877 msgid "mm/s or %" msgstr "mm/s of %" @@ -11572,7 +11636,7 @@ msgid "Extruder Color" msgstr "Extruderkleur" #: src/libslic3r/PrintConfig.cpp:827 src/libslic3r/PrintConfig.cpp:890 -#: src/libslic3r/PrintConfig.cpp:3363 +#: src/libslic3r/PrintConfig.cpp:3362 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" "Dit wordt alleen gebruikt in de PrusaSlicer-interface als een visueel " @@ -11666,11 +11730,11 @@ msgstr "" "ventilator aangezet worden en wordt de snelheid berekend door te " "interpoleren tussen de minimale en maximale snelheid." -#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:2313 +#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:2312 msgid "approximate seconds" msgstr "geschat aantal seconden" -#: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:3362 +#: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:3361 msgid "Color" msgstr "Kleur" @@ -11682,7 +11746,7 @@ msgstr "Filamentopmerkingen" msgid "You can put your notes regarding the filament here." msgstr "Hier kunt u opmerkingen over het filament plaatsen." -#: src/libslic3r/PrintConfig.cpp:904 src/libslic3r/PrintConfig.cpp:1798 +#: src/libslic3r/PrintConfig.cpp:904 src/libslic3r/PrintConfig.cpp:1797 msgid "Max volumetric speed" msgstr "Maximale volumetrische snelheid" @@ -11851,8 +11915,8 @@ msgstr "" "daarom een schuifmaat en doe meerdere metingen over het hele filament. " "Bereken vervolgens het gemiddelde." -#: src/libslic3r/PrintConfig.cpp:1024 src/libslic3r/PrintConfig.cpp:3401 -#: src/libslic3r/PrintConfig.cpp:3402 +#: src/libslic3r/PrintConfig.cpp:1024 src/libslic3r/PrintConfig.cpp:3400 +#: src/libslic3r/PrintConfig.cpp:3401 msgid "Density" msgstr "Dichtheid" @@ -11880,15 +11944,15 @@ msgstr "Filamenttype" msgid "The filament material type for use in custom G-codes." msgstr "Het filamenttype voor het gebruik van de custom G-codes." -#: src/libslic3r/PrintConfig.cpp:1062 +#: src/libslic3r/PrintConfig.cpp:1061 msgid "Soluble material" msgstr "Oplosbaar materiaal" -#: src/libslic3r/PrintConfig.cpp:1063 +#: src/libslic3r/PrintConfig.cpp:1062 msgid "Soluble material is most likely used for a soluble support." msgstr "Oplosbaar materiaal wordt vaak gebruikt voor oplosbaar support." -#: src/libslic3r/PrintConfig.cpp:1069 +#: src/libslic3r/PrintConfig.cpp:1068 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." @@ -11896,15 +11960,15 @@ msgstr "" "Voer hier de filamentkosten per kilogram in. Dit is alleen voor statistische " "informatie." -#: src/libslic3r/PrintConfig.cpp:1070 +#: src/libslic3r/PrintConfig.cpp:1069 msgid "money/kg" msgstr "€/kg" -#: src/libslic3r/PrintConfig.cpp:1075 +#: src/libslic3r/PrintConfig.cpp:1074 msgid "Spool weight" msgstr "Spoelgewicht" -#: src/libslic3r/PrintConfig.cpp:1076 +#: src/libslic3r/PrintConfig.cpp:1075 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " @@ -11916,19 +11980,19 @@ msgstr "" "berekende gewicht van de filamentspoel om te weten te komen of de " "hoeveelheid filament op de spoel voldoende is om de print te voltooien." -#: src/libslic3r/PrintConfig.cpp:1080 +#: src/libslic3r/PrintConfig.cpp:1079 msgid "g" msgstr "g" -#: src/libslic3r/PrintConfig.cpp:1089 src/libslic3r/PrintConfig.cpp:3506 +#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:3505 msgid "(Unknown)" msgstr "(Onbekend)" -#: src/libslic3r/PrintConfig.cpp:1093 +#: src/libslic3r/PrintConfig.cpp:1092 msgid "Fill angle" msgstr "Vullingshoek" -#: src/libslic3r/PrintConfig.cpp:1095 +#: src/libslic3r/PrintConfig.cpp:1094 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " @@ -11938,64 +12002,64 @@ msgstr "" "geprint. Bruggen worden geprint met de optimale richting. Deze instelling " "zal die richting niet beïnvloeden." -#: src/libslic3r/PrintConfig.cpp:1107 +#: src/libslic3r/PrintConfig.cpp:1106 msgid "Fill density" msgstr "Vullingsdichtheid" -#: src/libslic3r/PrintConfig.cpp:1109 +#: src/libslic3r/PrintConfig.cpp:1108 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" "Dichtheid van inwendige vulling, uitgedrukt in een percentage (0 - 100%)" -#: src/libslic3r/PrintConfig.cpp:1144 +#: src/libslic3r/PrintConfig.cpp:1143 msgid "Fill pattern" msgstr "Vullingspatroon" -#: src/libslic3r/PrintConfig.cpp:1146 +#: src/libslic3r/PrintConfig.cpp:1145 msgid "Fill pattern for general low-density infill." msgstr "Vulpatroon voor algemene lagere-dichtheidsvulling." -#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:2772 +#: src/libslic3r/PrintConfig.cpp:1166 src/libslic3r/PrintConfig.cpp:2771 msgid "Grid" msgstr "Raster" -#: src/libslic3r/PrintConfig.cpp:1169 +#: src/libslic3r/PrintConfig.cpp:1168 msgid "Stars" msgstr "Sterren" -#: src/libslic3r/PrintConfig.cpp:1170 +#: src/libslic3r/PrintConfig.cpp:1169 msgid "Cubic" msgstr "Kubisch" -#: src/libslic3r/PrintConfig.cpp:1171 +#: src/libslic3r/PrintConfig.cpp:1170 msgid "Line" msgstr "Lijn" -#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:2725 +#: src/libslic3r/PrintConfig.cpp:1172 src/libslic3r/PrintConfig.cpp:2724 msgid "Honeycomb" msgstr "Honingraat" -#: src/libslic3r/PrintConfig.cpp:1174 +#: src/libslic3r/PrintConfig.cpp:1173 msgid "3D Honeycomb" msgstr "3D-honingraat" -#: src/libslic3r/PrintConfig.cpp:1175 +#: src/libslic3r/PrintConfig.cpp:1174 msgid "Gyroid" msgstr "Gyroïde" -#: src/libslic3r/PrintConfig.cpp:1179 +#: src/libslic3r/PrintConfig.cpp:1178 msgid "Adaptive Cubic" msgstr "Adaptief kubisch" -#: src/libslic3r/PrintConfig.cpp:1180 +#: src/libslic3r/PrintConfig.cpp:1179 msgid "Support Cubic" msgstr "Ondersteunend kubisch" -#: src/libslic3r/PrintConfig.cpp:1181 +#: src/libslic3r/PrintConfig.cpp:1180 msgid "Lightning" -msgstr "Belichting" +msgstr "Bliksem" -#: src/libslic3r/PrintConfig.cpp:1186 +#: src/libslic3r/PrintConfig.cpp:1185 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." @@ -12003,11 +12067,11 @@ msgstr "" "Deze acceleratie zal uw printer gebruiken voor de eerste laag. Als dit " "ingesteld is op 0, wordt de standaard acceleratie gebruikt." -#: src/libslic3r/PrintConfig.cpp:1194 +#: src/libslic3r/PrintConfig.cpp:1193 msgid "First object layer over raft interface" msgstr "Eerste laag van het object boven de raft-interface" -#: src/libslic3r/PrintConfig.cpp:1195 +#: src/libslic3r/PrintConfig.cpp:1194 msgid "" "This is the acceleration your printer will use for first layer of object " "above raft interface. Set zero to disable acceleration control for first " @@ -12017,11 +12081,11 @@ msgstr "" "raft-interface. Stel in op 0 om acceleratiecontrole uit te schakelen voor de " "eerste laag boven de raft-interface." -#: src/libslic3r/PrintConfig.cpp:1204 +#: src/libslic3r/PrintConfig.cpp:1203 msgid "First layer bed temperature" msgstr "Bedtemperatuur eerste laag" -#: src/libslic3r/PrintConfig.cpp:1205 +#: src/libslic3r/PrintConfig.cpp:1204 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." @@ -12029,7 +12093,7 @@ msgstr "" "Bedtemperatuur voor de eerste laag. Als dit ingesteld is op 0, worden " "bedtemperatuur-commando's weggelaten in de output." -#: src/libslic3r/PrintConfig.cpp:1215 +#: src/libslic3r/PrintConfig.cpp:1214 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " @@ -12042,7 +12106,7 @@ msgstr "" "wordt dit berekend over de laagdikte van de eerste laag. Als dit is " "ingesteld op 0, wordt de standaard extrusiebreedte gebruikt." -#: src/libslic3r/PrintConfig.cpp:1229 +#: src/libslic3r/PrintConfig.cpp:1228 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " @@ -12052,11 +12116,11 @@ msgstr "" "printen om bedhechting en tolerantie te verbeteren op niet-perfecte " "printbedden." -#: src/libslic3r/PrintConfig.cpp:1237 +#: src/libslic3r/PrintConfig.cpp:1236 msgid "First layer speed" msgstr "Snelheid eerste laag" -#: src/libslic3r/PrintConfig.cpp:1238 +#: src/libslic3r/PrintConfig.cpp:1237 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " @@ -12067,11 +12131,11 @@ msgstr "" "van het type. Als dit is uitgedrukt als percentage, wordt dit berekend over " "de standaardsnelheid." -#: src/libslic3r/PrintConfig.cpp:1248 +#: src/libslic3r/PrintConfig.cpp:1247 msgid "Speed of object first layer over raft interface" msgstr "Snelheid van de eerste laag boven de raft-interface" -#: src/libslic3r/PrintConfig.cpp:1249 +#: src/libslic3r/PrintConfig.cpp:1248 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first object layer above raft interface, regardless " @@ -12083,11 +12147,11 @@ msgstr "" "interface, onafhankelijk van het type. Als dit is uitgedrukt als percentage " "(bijv. 40%) worden de standaard snelheden verschaald." -#: src/libslic3r/PrintConfig.cpp:1259 +#: src/libslic3r/PrintConfig.cpp:1258 msgid "First layer nozzle temperature" msgstr "Nozzletemperatuur eerste laag" -#: src/libslic3r/PrintConfig.cpp:1260 +#: src/libslic3r/PrintConfig.cpp:1259 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " @@ -12097,11 +12161,11 @@ msgstr "" "wijzigen in de print, stel dit dan in op 0 om temperatuurregeling uit te " "zetten in de G-code." -#: src/libslic3r/PrintConfig.cpp:1268 +#: src/libslic3r/PrintConfig.cpp:1267 msgid "Full fan speed at layer" msgstr "Volledige ventilatorsnelheid op laag" -#: src/libslic3r/PrintConfig.cpp:1269 +#: src/libslic3r/PrintConfig.cpp:1268 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " @@ -12115,23 +12179,23 @@ msgstr "" "\"disable_fan_first_layers\" in welk geval de ventilator zal draaien op de " "maximaal toegestane snelheid op laag \"disable_fan_first_layers\" + 1." -#: src/libslic3r/PrintConfig.cpp:1281 +#: src/libslic3r/PrintConfig.cpp:1280 msgid "Fuzzy skin type." msgstr "Type oneffen oppervlak." -#: src/libslic3r/PrintConfig.cpp:1288 +#: src/libslic3r/PrintConfig.cpp:1287 msgid "Outside walls" msgstr "Alleen buitenwanden" -#: src/libslic3r/PrintConfig.cpp:1289 +#: src/libslic3r/PrintConfig.cpp:1288 msgid "All walls" msgstr "Alle wanden" -#: src/libslic3r/PrintConfig.cpp:1294 +#: src/libslic3r/PrintConfig.cpp:1293 msgid "Fuzzy skin thickness" msgstr "Dikte van oneffen oppervlak" -#: src/libslic3r/PrintConfig.cpp:1296 +#: src/libslic3r/PrintConfig.cpp:1295 msgid "" "The maximum distance that each skin point can be offset (both ways), " "measured perpendicular to the perimeter wall." @@ -12139,11 +12203,11 @@ msgstr "" "De maximale afstand die elke punt kan hebben (naar beide kanten), haaks " "gemeten op de perimeterwand." -#: src/libslic3r/PrintConfig.cpp:1304 +#: src/libslic3r/PrintConfig.cpp:1303 msgid "Fuzzy skin point distance" msgstr "Puntafstand van oneffen oppervlak" -#: src/libslic3r/PrintConfig.cpp:1306 +#: src/libslic3r/PrintConfig.cpp:1305 msgid "" "Perimeters will be split into multiple segments by inserting Fuzzy skin " "points. Lowering the Fuzzy skin point distance will increase the number of " @@ -12153,11 +12217,11 @@ msgstr "" "punten voor oneffen oppervlak. Verlagen van de afstand zorgt voor een " "verhoging van het aantal willekeurige punten op de perimeterwand." -#: src/libslic3r/PrintConfig.cpp:1314 +#: src/libslic3r/PrintConfig.cpp:1313 msgid "Fill gaps" msgstr "Vul gaten" -#: src/libslic3r/PrintConfig.cpp:1316 +#: src/libslic3r/PrintConfig.cpp:1315 msgid "" "Enables filling of gaps between perimeters and between the inner most " "perimeters and infill." @@ -12165,7 +12229,7 @@ msgstr "" "Toestaan van het vullen van gaten tussen perimeters en de binnenste " "perimeter en vulling." -#: src/libslic3r/PrintConfig.cpp:1323 +#: src/libslic3r/PrintConfig.cpp:1322 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " @@ -12175,11 +12239,11 @@ msgstr "" "Houd deze waarde laag om schudden te voorkomen (wat resulteert in " "resonantieproblemen). Als dit is ingesteld op 0, worden gaten niet gevuld." -#: src/libslic3r/PrintConfig.cpp:1331 +#: src/libslic3r/PrintConfig.cpp:1330 msgid "Verbose G-code" msgstr "Opmerkingen in G-code" -#: src/libslic3r/PrintConfig.cpp:1332 +#: src/libslic3r/PrintConfig.cpp:1331 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " @@ -12189,11 +12253,11 @@ msgstr "" "commando's wordt een opmerking geplaatst. Als u print vanaf een SD-kaart, " "kan de extra grootte van het bestand de firmware vertragen." -#: src/libslic3r/PrintConfig.cpp:1339 +#: src/libslic3r/PrintConfig.cpp:1338 msgid "G-code flavor" msgstr "G-code-variant" -#: src/libslic3r/PrintConfig.cpp:1340 +#: src/libslic3r/PrintConfig.cpp:1339 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " @@ -12201,18 +12265,18 @@ msgid "" "extrusion value at all." msgstr "" "Sommige G- en M-commando's zijn niet universeel. Stel deze optie in om een " -"geschikte uitvoer te krijgen voor uw printer. De 'Geen extrusie'-instelling " -"kan gebruikt worden om te printen zonder materiaal te extruderen." +"compatibele uitvoer te krijgen voor uw printer. De 'Geen extrusie'-" +"instelling kan gebruikt worden om te printen zonder materiaal te extruderen." -#: src/libslic3r/PrintConfig.cpp:1367 +#: src/libslic3r/PrintConfig.cpp:1366 msgid "No extrusion" msgstr "Geen extrusie" -#: src/libslic3r/PrintConfig.cpp:1372 +#: src/libslic3r/PrintConfig.cpp:1371 msgid "Label objects" msgstr "Label objecten" -#: src/libslic3r/PrintConfig.cpp:1373 +#: src/libslic3r/PrintConfig.cpp:1372 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " @@ -12221,22 +12285,22 @@ msgid "" msgstr "" "Schakel dit in om opmerkingen in de G-code toe te voegen voor bewegingen die " "behoren tot een object. Dit is handig voor de OctoPrint CancelObject-plugin. " -"Deze instelling is NIET geschikt voor een multi-materialsetup met één " +"Deze instelling is NIET compatibel met een multi-materialsetup met één " "extruder en 'Afvegen in object' en 'Afvegen in vulling'." -#: src/libslic3r/PrintConfig.cpp:1380 +#: src/libslic3r/PrintConfig.cpp:1379 msgid "G-code substitutions" -msgstr "" +msgstr "G-code-substituties" -#: src/libslic3r/PrintConfig.cpp:1381 +#: src/libslic3r/PrintConfig.cpp:1380 msgid "Find / replace patterns in G-code lines and substitute them." -msgstr "" +msgstr "Zoek / vervang patronen in G-coderegels en substitueer ze." -#: src/libslic3r/PrintConfig.cpp:1386 +#: src/libslic3r/PrintConfig.cpp:1385 msgid "High extruder current on filament swap" msgstr "Hoge stroomsterkte bij extruder voor filamentwissel" -#: src/libslic3r/PrintConfig.cpp:1387 +#: src/libslic3r/PrintConfig.cpp:1386 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " @@ -12247,7 +12311,7 @@ msgstr "" "maken en om weerstand te overwinnen tijdens het laden van filament met een " "misvormde kop." -#: src/libslic3r/PrintConfig.cpp:1395 +#: src/libslic3r/PrintConfig.cpp:1394 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." @@ -12255,11 +12319,11 @@ msgstr "" "Deze acceleratie zal uw printer gebruiken voor de vulling. Als dit is " "ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld." -#: src/libslic3r/PrintConfig.cpp:1403 +#: src/libslic3r/PrintConfig.cpp:1402 msgid "Combine infill every" msgstr "Combineer vulling elke" -#: src/libslic3r/PrintConfig.cpp:1405 +#: src/libslic3r/PrintConfig.cpp:1404 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." @@ -12268,15 +12332,15 @@ msgstr "" "de vullingslagen stapsgewijs dikker te maken, terwijl de laagdikte van " "perimeters behouden wordt." -#: src/libslic3r/PrintConfig.cpp:1408 +#: src/libslic3r/PrintConfig.cpp:1407 msgid "Combine infill every n layers" msgstr "Combineer vulling elke n lagen" -#: src/libslic3r/PrintConfig.cpp:1414 +#: src/libslic3r/PrintConfig.cpp:1413 msgid "Length of the infill anchor" msgstr "Lengte van de vullingsbevestiging" -#: src/libslic3r/PrintConfig.cpp:1416 +#: src/libslic3r/PrintConfig.cpp:1415 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " @@ -12298,35 +12362,35 @@ msgstr "" "deze parameter, maar niet langer dan \"anchor_length_max\". Stel in op 0 om " "uit te zetten." -#: src/libslic3r/PrintConfig.cpp:1432 +#: src/libslic3r/PrintConfig.cpp:1431 msgid "0 (no open anchors)" msgstr "0 (geen losse bevestiging)" -#: src/libslic3r/PrintConfig.cpp:1433 src/libslic3r/PrintConfig.cpp:1456 +#: src/libslic3r/PrintConfig.cpp:1432 src/libslic3r/PrintConfig.cpp:1455 msgid "1 mm" msgstr "1 mm" -#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1457 +#: src/libslic3r/PrintConfig.cpp:1433 src/libslic3r/PrintConfig.cpp:1456 msgid "2 mm" msgstr "2 mm" -#: src/libslic3r/PrintConfig.cpp:1435 src/libslic3r/PrintConfig.cpp:1458 +#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1457 msgid "5 mm" msgstr "5 mm" -#: src/libslic3r/PrintConfig.cpp:1436 src/libslic3r/PrintConfig.cpp:1459 +#: src/libslic3r/PrintConfig.cpp:1435 src/libslic3r/PrintConfig.cpp:1458 msgid "10 mm" msgstr "10 mm" -#: src/libslic3r/PrintConfig.cpp:1437 src/libslic3r/PrintConfig.cpp:1460 +#: src/libslic3r/PrintConfig.cpp:1436 src/libslic3r/PrintConfig.cpp:1459 msgid "1000 (unlimited)" msgstr "1000 (ongelimiteerd)" -#: src/libslic3r/PrintConfig.cpp:1442 +#: src/libslic3r/PrintConfig.cpp:1441 msgid "Maximum length of the infill anchor" msgstr "Maximale lengte van de vullingsbevestiging" -#: src/libslic3r/PrintConfig.cpp:1444 +#: src/libslic3r/PrintConfig.cpp:1443 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " @@ -12347,19 +12411,19 @@ msgstr "" "perimetersegment wordt gelimiteerd tot \"infill_anchor\", maar niet langer " "dan deze parameter. Stel in op 0 om uit te zetten." -#: src/libslic3r/PrintConfig.cpp:1455 +#: src/libslic3r/PrintConfig.cpp:1454 msgid "0 (not anchored)" msgstr "0 (niet bevestigd)" -#: src/libslic3r/PrintConfig.cpp:1465 +#: src/libslic3r/PrintConfig.cpp:1464 msgid "Infill extruder" msgstr "Vullingsextruder" -#: src/libslic3r/PrintConfig.cpp:1467 +#: src/libslic3r/PrintConfig.cpp:1466 msgid "The extruder to use when printing infill." msgstr "De extruder die gebruikt wordt voor het printen van de vulling." -#: src/libslic3r/PrintConfig.cpp:1475 +#: src/libslic3r/PrintConfig.cpp:1474 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " @@ -12373,11 +12437,11 @@ msgstr "" "printen en het onderdeel sterker maken met deze optie. Als dit is uitgedrukt " "als percentage, wordt dit berekend over de laagdikte." -#: src/libslic3r/PrintConfig.cpp:1486 +#: src/libslic3r/PrintConfig.cpp:1485 msgid "Infill before perimeters" msgstr "Vulling vóór perimeters" -#: src/libslic3r/PrintConfig.cpp:1487 +#: src/libslic3r/PrintConfig.cpp:1486 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." @@ -12385,11 +12449,11 @@ msgstr "" "Deze optie verandert de printvolgorde van perimeters en vulling; de " "laatstgenoemde eerst." -#: src/libslic3r/PrintConfig.cpp:1492 +#: src/libslic3r/PrintConfig.cpp:1491 msgid "Only infill where needed" msgstr "Alleen vulling waar nodig" -#: src/libslic3r/PrintConfig.cpp:1494 +#: src/libslic3r/PrintConfig.cpp:1493 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " @@ -12399,11 +12463,11 @@ msgstr "" "ondersteuning van bovenvlakken (het fungeert als inwendig support). Let op: " "deze optie vertraagt de G-code-generatie." -#: src/libslic3r/PrintConfig.cpp:1501 +#: src/libslic3r/PrintConfig.cpp:1500 msgid "Infill/perimeters overlap" msgstr "Overlapping van vulling/perimeters" -#: src/libslic3r/PrintConfig.cpp:1503 +#: src/libslic3r/PrintConfig.cpp:1502 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " @@ -12415,25 +12479,25 @@ msgstr "" "maar terugslag kan zorgen voor gaten. Als dit is uitgedrukt als percentage, " "wordt dit berekend over de extrusiebreedte van de perimeters." -#: src/libslic3r/PrintConfig.cpp:1514 +#: src/libslic3r/PrintConfig.cpp:1513 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" "Printsnelheid voor vulling. Als dit ingesteld is op 0, wordt de snelheid " "automatisch berekend." -#: src/libslic3r/PrintConfig.cpp:1522 +#: src/libslic3r/PrintConfig.cpp:1521 msgid "Inherits profile" msgstr "Afgeleid profiel" -#: src/libslic3r/PrintConfig.cpp:1523 +#: src/libslic3r/PrintConfig.cpp:1522 msgid "Name of the profile, from which this profile inherits." msgstr "Profielnaam waar profiel op is gebaseerd." -#: src/libslic3r/PrintConfig.cpp:1536 +#: src/libslic3r/PrintConfig.cpp:1535 msgid "Interface shells" msgstr "Interfaceshells" -#: src/libslic3r/PrintConfig.cpp:1537 +#: src/libslic3r/PrintConfig.cpp:1536 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " @@ -12443,67 +12507,67 @@ msgstr "" "volumes. Dit is handig voor multi-extruderprints met transparante materialen " "of handmatig oplosbaar support." -#: src/libslic3r/PrintConfig.cpp:1545 +#: src/libslic3r/PrintConfig.cpp:1544 msgid "Maximum width of a segmented region" msgstr "Maximale breedte van een gesegmenteerd gebied" -#: src/libslic3r/PrintConfig.cpp:1546 +#: src/libslic3r/PrintConfig.cpp:1545 msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" "Maximale breedte van een gesegmenteerd gebied. Stel in op 0 om uit te " "schakelen." -#: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:2158 -#: src/libslic3r/PrintConfig.cpp:2167 +#: src/libslic3r/PrintConfig.cpp:1546 src/libslic3r/PrintConfig.cpp:2157 +#: src/libslic3r/PrintConfig.cpp:2166 msgid "mm (zero to disable)" msgstr "mm (stel in op 0 om uit te schakelen)" -#: src/libslic3r/PrintConfig.cpp:1554 +#: src/libslic3r/PrintConfig.cpp:1553 msgid "Enable ironing" msgstr "Sta strijken toe" -#: src/libslic3r/PrintConfig.cpp:1555 +#: src/libslic3r/PrintConfig.cpp:1554 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" "Sta strijken van de toplagen toe met het hete hotend voor een gladder " "oppervlak" -#: src/libslic3r/PrintConfig.cpp:1561 src/libslic3r/PrintConfig.cpp:1563 +#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1562 msgid "Ironing Type" msgstr "Strijktype" -#: src/libslic3r/PrintConfig.cpp:1568 +#: src/libslic3r/PrintConfig.cpp:1567 msgid "All top surfaces" msgstr "Alle bovenvlakken" -#: src/libslic3r/PrintConfig.cpp:1569 +#: src/libslic3r/PrintConfig.cpp:1568 msgid "Topmost surface only" msgstr "Alleen bovenste vlak" -#: src/libslic3r/PrintConfig.cpp:1570 +#: src/libslic3r/PrintConfig.cpp:1569 msgid "All solid surfaces" msgstr "Alle dichte vlakken" -#: src/libslic3r/PrintConfig.cpp:1575 +#: src/libslic3r/PrintConfig.cpp:1574 msgid "Flow rate" msgstr "Debiet" -#: src/libslic3r/PrintConfig.cpp:1577 +#: src/libslic3r/PrintConfig.cpp:1576 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" "Percentage van het debiet ten opzichte van de standaard laagdikte van het " "model." -#: src/libslic3r/PrintConfig.cpp:1585 +#: src/libslic3r/PrintConfig.cpp:1584 msgid "Spacing between ironing passes" msgstr "Ruimte tussen strijkpassages" -#: src/libslic3r/PrintConfig.cpp:1587 +#: src/libslic3r/PrintConfig.cpp:1586 msgid "Distance between ironing lines" msgstr "Afstand tussen strijkpaden" -#: src/libslic3r/PrintConfig.cpp:1604 +#: src/libslic3r/PrintConfig.cpp:1603 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " @@ -12514,11 +12578,11 @@ msgstr "" "beweging en voor de extruder naar het volgende punt beweegt. Hier kunt u " "variabelen gebruiken voor alle instellingen zoals 'layer_num' en 'layer_z'." -#: src/libslic3r/PrintConfig.cpp:1615 +#: src/libslic3r/PrintConfig.cpp:1614 msgid "Supports remaining times" msgstr "Ondersteunt resterende tijd" -#: src/libslic3r/PrintConfig.cpp:1616 +#: src/libslic3r/PrintConfig.cpp:1615 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " @@ -12530,155 +12594,155 @@ msgstr "" "nu herkent de Prusa i3 MK3 de M73-commando's. Ook ondersteunt de i3 MK3 " "firmware M73 Qxx Sxx voor de stille modus." -#: src/libslic3r/PrintConfig.cpp:1624 +#: src/libslic3r/PrintConfig.cpp:1623 msgid "Supports stealth mode" msgstr "Ondersteunt stille modus" -#: src/libslic3r/PrintConfig.cpp:1625 +#: src/libslic3r/PrintConfig.cpp:1624 msgid "The firmware supports stealth mode" msgstr "De firmware ondersteunt stille modus" -#: src/libslic3r/PrintConfig.cpp:1630 +#: src/libslic3r/PrintConfig.cpp:1629 msgid "How to apply limits" msgstr "Hoe limieten toe te voegen" -#: src/libslic3r/PrintConfig.cpp:1631 +#: src/libslic3r/PrintConfig.cpp:1630 msgid "Purpose of Machine Limits" msgstr "Doel van de machinelimieten" -#: src/libslic3r/PrintConfig.cpp:1633 +#: src/libslic3r/PrintConfig.cpp:1632 msgid "How to apply the Machine Limits" msgstr "Hoe machinelimieten toe te voegen" -#: src/libslic3r/PrintConfig.cpp:1638 +#: src/libslic3r/PrintConfig.cpp:1637 msgid "Emit to G-code" msgstr "Invoegen in de G-code" -#: src/libslic3r/PrintConfig.cpp:1639 +#: src/libslic3r/PrintConfig.cpp:1638 msgid "Use for time estimate" msgstr "Gebruik om tijd te schatten" -#: src/libslic3r/PrintConfig.cpp:1640 +#: src/libslic3r/PrintConfig.cpp:1639 msgid "Ignore" msgstr "Negeren" -#: src/libslic3r/PrintConfig.cpp:1663 +#: src/libslic3r/PrintConfig.cpp:1662 msgid "Maximum feedrate X" msgstr "Maximale snelheid van de X-as" -#: src/libslic3r/PrintConfig.cpp:1664 +#: src/libslic3r/PrintConfig.cpp:1663 msgid "Maximum feedrate Y" msgstr "Maximale snelheid van de Y-as" -#: src/libslic3r/PrintConfig.cpp:1665 +#: src/libslic3r/PrintConfig.cpp:1664 msgid "Maximum feedrate Z" msgstr "Maximale snelheid van de Z-as" -#: src/libslic3r/PrintConfig.cpp:1666 +#: src/libslic3r/PrintConfig.cpp:1665 msgid "Maximum feedrate E" msgstr "Maximale extrusiesnelheid" -#: src/libslic3r/PrintConfig.cpp:1669 +#: src/libslic3r/PrintConfig.cpp:1668 msgid "Maximum feedrate of the X axis" msgstr "Maximale snelheid van de X-as" -#: src/libslic3r/PrintConfig.cpp:1670 +#: src/libslic3r/PrintConfig.cpp:1669 msgid "Maximum feedrate of the Y axis" msgstr "Maximale snelheid van de Y-as" -#: src/libslic3r/PrintConfig.cpp:1671 +#: src/libslic3r/PrintConfig.cpp:1670 msgid "Maximum feedrate of the Z axis" msgstr "Maximale snelheid van de Z-as" -#: src/libslic3r/PrintConfig.cpp:1672 +#: src/libslic3r/PrintConfig.cpp:1671 msgid "Maximum feedrate of the E axis" msgstr "Maximale extrusiesnelheid" -#: src/libslic3r/PrintConfig.cpp:1680 +#: src/libslic3r/PrintConfig.cpp:1679 msgid "Maximum acceleration X" msgstr "Maximale acceleratie X" -#: src/libslic3r/PrintConfig.cpp:1681 +#: src/libslic3r/PrintConfig.cpp:1680 msgid "Maximum acceleration Y" msgstr "Maximale acceleratie Y" -#: src/libslic3r/PrintConfig.cpp:1682 +#: src/libslic3r/PrintConfig.cpp:1681 msgid "Maximum acceleration Z" msgstr "Maximale acceleratie Z" -#: src/libslic3r/PrintConfig.cpp:1683 +#: src/libslic3r/PrintConfig.cpp:1682 msgid "Maximum acceleration E" msgstr "Maximale acceleratie E" -#: src/libslic3r/PrintConfig.cpp:1686 +#: src/libslic3r/PrintConfig.cpp:1685 msgid "Maximum acceleration of the X axis" msgstr "Maximale acceleratie van de X-as" -#: src/libslic3r/PrintConfig.cpp:1687 +#: src/libslic3r/PrintConfig.cpp:1686 msgid "Maximum acceleration of the Y axis" msgstr "Maximale acceleratie van de Y-as" -#: src/libslic3r/PrintConfig.cpp:1688 +#: src/libslic3r/PrintConfig.cpp:1687 msgid "Maximum acceleration of the Z axis" msgstr "Maximale acceleratie van de Z-as" -#: src/libslic3r/PrintConfig.cpp:1689 +#: src/libslic3r/PrintConfig.cpp:1688 msgid "Maximum acceleration of the E axis" msgstr "Maximale extrusie-acceleratie" -#: src/libslic3r/PrintConfig.cpp:1697 +#: src/libslic3r/PrintConfig.cpp:1696 msgid "Maximum jerk X" msgstr "Maximale ruk X" -#: src/libslic3r/PrintConfig.cpp:1698 +#: src/libslic3r/PrintConfig.cpp:1697 msgid "Maximum jerk Y" msgstr "Maximale ruk Y" -#: src/libslic3r/PrintConfig.cpp:1699 +#: src/libslic3r/PrintConfig.cpp:1698 msgid "Maximum jerk Z" msgstr "Maximale ruk Z" -#: src/libslic3r/PrintConfig.cpp:1700 +#: src/libslic3r/PrintConfig.cpp:1699 msgid "Maximum jerk E" msgstr "Maximale ruk E" -#: src/libslic3r/PrintConfig.cpp:1703 +#: src/libslic3r/PrintConfig.cpp:1702 msgid "Maximum jerk of the X axis" msgstr "Maximale ruk van de X-as" -#: src/libslic3r/PrintConfig.cpp:1704 +#: src/libslic3r/PrintConfig.cpp:1703 msgid "Maximum jerk of the Y axis" msgstr "Maximale ruk van de Y-as" -#: src/libslic3r/PrintConfig.cpp:1705 +#: src/libslic3r/PrintConfig.cpp:1704 msgid "Maximum jerk of the Z axis" msgstr "Maximale ruk van de Z-as" -#: src/libslic3r/PrintConfig.cpp:1706 +#: src/libslic3r/PrintConfig.cpp:1705 msgid "Maximum jerk of the E axis" msgstr "Maximale extrusie-ruk" -#: src/libslic3r/PrintConfig.cpp:1716 +#: src/libslic3r/PrintConfig.cpp:1715 msgid "Minimum feedrate when extruding" msgstr "Minimale snelheid tijdens extruderen" -#: src/libslic3r/PrintConfig.cpp:1718 +#: src/libslic3r/PrintConfig.cpp:1717 msgid "Minimum feedrate when extruding (M205 S)" msgstr "Minimale snelheid tijdens extruderen (M205 S)" -#: src/libslic3r/PrintConfig.cpp:1726 +#: src/libslic3r/PrintConfig.cpp:1725 msgid "Minimum travel feedrate" msgstr "Minimale snelheid voor bewegingen" -#: src/libslic3r/PrintConfig.cpp:1728 +#: src/libslic3r/PrintConfig.cpp:1727 msgid "Minimum travel feedrate (M205 T)" msgstr "Minimale snelheid voor bewegingen (M205 T)" -#: src/libslic3r/PrintConfig.cpp:1736 +#: src/libslic3r/PrintConfig.cpp:1735 msgid "Maximum acceleration when extruding" msgstr "Maximale acceleratie tijdens extruderen" -#: src/libslic3r/PrintConfig.cpp:1738 +#: src/libslic3r/PrintConfig.cpp:1737 msgid "" "Maximum acceleration when extruding (M204 P)\n" "\n" @@ -12690,31 +12754,31 @@ msgstr "" "Marlin (legacy) firmware gebruikt deze ook voor bewegingsacceleratie (M204 " "T)." -#: src/libslic3r/PrintConfig.cpp:1749 +#: src/libslic3r/PrintConfig.cpp:1748 msgid "Maximum acceleration when retracting" msgstr "Maximale acceleratie tijdens retracten" -#: src/libslic3r/PrintConfig.cpp:1751 +#: src/libslic3r/PrintConfig.cpp:1750 msgid "Maximum acceleration when retracting (M204 R)" msgstr "Maximale acceleratie tijdens retracten (M204 R)" -#: src/libslic3r/PrintConfig.cpp:1759 +#: src/libslic3r/PrintConfig.cpp:1758 msgid "Maximum acceleration for travel moves" msgstr "Maximale acceleratie voor bewegingen" -#: src/libslic3r/PrintConfig.cpp:1761 +#: src/libslic3r/PrintConfig.cpp:1760 msgid "Maximum acceleration for travel moves (M204 T)" msgstr "Maximale acceleratie voor bewegingen (M204 T)" -#: src/libslic3r/PrintConfig.cpp:1768 src/libslic3r/PrintConfig.cpp:1777 +#: src/libslic3r/PrintConfig.cpp:1767 src/libslic3r/PrintConfig.cpp:1776 msgid "Max" msgstr "Max" -#: src/libslic3r/PrintConfig.cpp:1769 +#: src/libslic3r/PrintConfig.cpp:1768 msgid "This setting represents the maximum speed of your fan." msgstr "Deze instelling gaat over de maximale snelheid van uw ventilator." -#: src/libslic3r/PrintConfig.cpp:1778 +#: src/libslic3r/PrintConfig.cpp:1777 msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " @@ -12726,11 +12790,11 @@ msgstr "" "75% van de extrusiebreedte voor een goede interfacehechting. Als dit op 0 " "staat, wordt de hoogte gelimiteerd tot 75% van de nozzlediameter." -#: src/libslic3r/PrintConfig.cpp:1788 +#: src/libslic3r/PrintConfig.cpp:1787 msgid "Max print speed" msgstr "Maximale printsnelheid" -#: src/libslic3r/PrintConfig.cpp:1789 +#: src/libslic3r/PrintConfig.cpp:1788 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " @@ -12741,7 +12805,7 @@ msgstr "" "experimentele instelling wordt gebruikt voor de hoogste printsnelheid die u " "toestaat." -#: src/libslic3r/PrintConfig.cpp:1799 +#: src/libslic3r/PrintConfig.cpp:1798 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." @@ -12749,11 +12813,11 @@ msgstr "" "Deze experimentele instelling wordt gebruikt voor de maximale volumetrische " "snelheid van de extruder." -#: src/libslic3r/PrintConfig.cpp:1807 +#: src/libslic3r/PrintConfig.cpp:1806 msgid "Max volumetric slope positive" msgstr "Maximale volumetrische stijging" -#: src/libslic3r/PrintConfig.cpp:1808 +#: src/libslic3r/PrintConfig.cpp:1807 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate for a transition from lower speed to higher speed. A value of 1.8 mm³/" @@ -12761,16 +12825,21 @@ msgid "" "extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s " "(feedrate 60 mm/s) will take at least 2 seconds." msgstr "" +"Deze experimentele instelling wordt gebruikt om de extrusiesnelheidsratio te " +"limiteren voor een transitie van lage tot hoge snelheid. Een waarde van 1,8 " +"mm³/s² verzekert dat een wijziging in extrusieratio van 1,8 mm³/s (0,45 mm " +"extrusiebreedte, 0,2 mm laagdikte, voedingssnelheid 20 mm/s) naar 5,4 mm³/s " +"(voedingssnelheid 60 mm/s) tenminste 2 seconden duurt." -#: src/libslic3r/PrintConfig.cpp:1813 src/libslic3r/PrintConfig.cpp:1825 +#: src/libslic3r/PrintConfig.cpp:1812 src/libslic3r/PrintConfig.cpp:1824 msgid "mm³/s²" msgstr "mm³/s²" -#: src/libslic3r/PrintConfig.cpp:1819 +#: src/libslic3r/PrintConfig.cpp:1818 msgid "Max volumetric slope negative" msgstr "Maximale volumetrische daling" -#: src/libslic3r/PrintConfig.cpp:1820 +#: src/libslic3r/PrintConfig.cpp:1819 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate for a transition from higher speed to lower speed. A value of 1.8 mm³/" @@ -12778,18 +12847,23 @@ msgid "" "extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s " "(feedrate 20 mm/s) will take at least 2 seconds." msgstr "" +"Deze experimentele instelling wordt gebruikt om de extrusiesnelheidsratio te " +"limiteren voor een transitie van hoge tot lage snelheid. Een waarde van 1,8 " +"mm³/s² verzekert dat een wijziging in extrusieratio van 5,4 mm³/s (0,45 mm " +"extrusiebreedte, 0,2 mm laagdikte, voedingssnelheid 60 mm/s) naar 1,8 mm³/s " +"(voedingssnelheid 20 mm/s) tenminste 2 seconden duurt." -#: src/libslic3r/PrintConfig.cpp:1831 src/libslic3r/PrintConfig.cpp:1840 +#: src/libslic3r/PrintConfig.cpp:1830 src/libslic3r/PrintConfig.cpp:1839 msgid "Min" msgstr "Min" -#: src/libslic3r/PrintConfig.cpp:1832 +#: src/libslic3r/PrintConfig.cpp:1831 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" "Deze instelling geeft de minimale snelheid van uw ventilator aan waarbij de " "ventilator draait." -#: src/libslic3r/PrintConfig.cpp:1841 +#: src/libslic3r/PrintConfig.cpp:1840 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " @@ -12799,20 +12873,20 @@ msgstr "" "resolutie voor variabele laagdikte. Typische waarden zijn tussen 0,05 en 0,1 " "mm." -#: src/libslic3r/PrintConfig.cpp:1849 +#: src/libslic3r/PrintConfig.cpp:1848 msgid "Min print speed" msgstr "Minimale printsnelheid" -#: src/libslic3r/PrintConfig.cpp:1850 +#: src/libslic3r/PrintConfig.cpp:1849 msgid "Slic3r will not scale speed down below this speed." msgstr "" "PrusaSlicer zal de printsnelheid niet verlagen tot onder deze snelheid." -#: src/libslic3r/PrintConfig.cpp:1857 +#: src/libslic3r/PrintConfig.cpp:1856 msgid "Minimal filament extrusion length" msgstr "Minimale extrusielengte" -#: src/libslic3r/PrintConfig.cpp:1858 +#: src/libslic3r/PrintConfig.cpp:1857 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " @@ -12822,11 +12896,11 @@ msgstr "" "hoeveelheid filament op de eerste laag te verbruiken. Voor multi-" "extruderprinters is dit het minimum voor elke extruder." -#: src/libslic3r/PrintConfig.cpp:1867 +#: src/libslic3r/PrintConfig.cpp:1866 msgid "Configuration notes" msgstr "Configuratie-opmerkingen" -#: src/libslic3r/PrintConfig.cpp:1868 +#: src/libslic3r/PrintConfig.cpp:1867 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." @@ -12834,28 +12908,28 @@ msgstr "" "Hier kunt u eigen opmerkingen plaatsen. Deze tekst wordt bovenin de G-code " "toegevoegd." -#: src/libslic3r/PrintConfig.cpp:1878 +#: src/libslic3r/PrintConfig.cpp:1877 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "Dit is de diameter van uw extruder-nozzle (bijvoorbeeld 0.4)" -#: src/libslic3r/PrintConfig.cpp:1883 +#: src/libslic3r/PrintConfig.cpp:1882 msgid "Host Type" msgstr "Hosttype" -#: src/libslic3r/PrintConfig.cpp:1884 +#: src/libslic3r/PrintConfig.cpp:1883 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" -"PrusaSlicer kan gcode-bestanden uploaden naar een printerhost. Dit veld moet " -"het type host bevatten." +"PrusaSlicer kan .gcode-bestanden uploaden naar een printerhost. Dit veld " +"moet het type host bevatten." -#: src/libslic3r/PrintConfig.cpp:1906 +#: src/libslic3r/PrintConfig.cpp:1905 msgid "Only retract when crossing perimeters" msgstr "Alleen retracten bij kruisende perimeters" -#: src/libslic3r/PrintConfig.cpp:1907 +#: src/libslic3r/PrintConfig.cpp:1906 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." @@ -12863,7 +12937,7 @@ msgstr "" "Schakelt retracten uit als de bewegingspaden de perimeters van de bovenste " "laag niet overschrijdt (en maakt eventueel druipen dus onzichtbaar)." -#: src/libslic3r/PrintConfig.cpp:1914 +#: src/libslic3r/PrintConfig.cpp:1913 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " @@ -12873,11 +12947,11 @@ msgstr "" "voorkomen. Het staat een smalle skirt automatisch toe en beweegt extruders " "buiten zo'n skirt als de temperatuur verandert." -#: src/libslic3r/PrintConfig.cpp:1921 +#: src/libslic3r/PrintConfig.cpp:1920 msgid "Output filename format" msgstr "Formaat van bestandsnaam" -#: src/libslic3r/PrintConfig.cpp:1922 +#: src/libslic3r/PrintConfig.cpp:1921 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " @@ -12889,11 +12963,11 @@ msgstr "" "'year', 'month', 'day', 'hour', 'minute', 'second', 'version', " "'input_filename', 'input_filename_base', etc." -#: src/libslic3r/PrintConfig.cpp:1931 +#: src/libslic3r/PrintConfig.cpp:1930 msgid "Detect bridging perimeters" msgstr "Detecteer brugperimeters" -#: src/libslic3r/PrintConfig.cpp:1933 +#: src/libslic3r/PrintConfig.cpp:1932 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." @@ -12901,11 +12975,11 @@ msgstr "" "Experimentele optie om het debiet voor overhanging aan te passen. Het debiet " "voor bruggen wordt aangehouden, evenals de printsnelheid en de koeling." -#: src/libslic3r/PrintConfig.cpp:1939 +#: src/libslic3r/PrintConfig.cpp:1938 msgid "Filament parking position" msgstr "Filament parkeerpositie" -#: src/libslic3r/PrintConfig.cpp:1940 +#: src/libslic3r/PrintConfig.cpp:1939 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." @@ -12914,11 +12988,11 @@ msgstr "" "wanneer dat niet geladen is. Deze moet overeenkomen met de waarde in de " "firmware." -#: src/libslic3r/PrintConfig.cpp:1948 +#: src/libslic3r/PrintConfig.cpp:1947 msgid "Extra loading distance" msgstr "Extra laadafstand" -#: src/libslic3r/PrintConfig.cpp:1949 +#: src/libslic3r/PrintConfig.cpp:1948 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " @@ -12930,12 +13004,12 @@ msgstr "" "teruggetrokken wordt. Als de waarde positief is, zal het verder geladen " "worden. Als het negatief is, is de laadafstand dus korter." -#: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:1974 -#: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:1998 +#: src/libslic3r/PrintConfig.cpp:1956 src/libslic3r/PrintConfig.cpp:1973 +#: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:1997 msgid "Perimeters" msgstr "Perimeters" -#: src/libslic3r/PrintConfig.cpp:1958 +#: src/libslic3r/PrintConfig.cpp:1957 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." @@ -12943,17 +13017,17 @@ msgstr "" "Deze acceleratie zal uw printer gebruiken voor de perimeters. Als dit is " "ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld." -#: src/libslic3r/PrintConfig.cpp:1965 +#: src/libslic3r/PrintConfig.cpp:1964 msgid "Perimeter extruder" msgstr "Perimeterextruder" -#: src/libslic3r/PrintConfig.cpp:1967 +#: src/libslic3r/PrintConfig.cpp:1966 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" "De extruder die gebruikt wordt voor het printen van perimeters en de brim." -#: src/libslic3r/PrintConfig.cpp:1976 +#: src/libslic3r/PrintConfig.cpp:1975 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " @@ -12967,14 +13041,14 @@ msgstr "" "nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit berekend " "over de laagdikte." -#: src/libslic3r/PrintConfig.cpp:1990 +#: src/libslic3r/PrintConfig.cpp:1989 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" "Printsnelheid voor de perimeters (contouren, ook wel bekend als verticale " "shells). Als dit ingesteld is op 0, wordt een automatische snelheid genomen." -#: src/libslic3r/PrintConfig.cpp:2000 +#: src/libslic3r/PrintConfig.cpp:1999 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " @@ -12986,11 +13060,11 @@ msgstr "" "een hoger aantal perimeters als de optie voor extra perimeters is " "ingeschakeld." -#: src/libslic3r/PrintConfig.cpp:2004 +#: src/libslic3r/PrintConfig.cpp:2003 msgid "(minimum)" msgstr "(minimum)" -#: src/libslic3r/PrintConfig.cpp:2012 +#: src/libslic3r/PrintConfig.cpp:2011 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " @@ -13000,38 +13074,38 @@ msgid "" msgstr "" "Als u de output-G-code via custom scripts wilt verwerken, hoeft u alleen de " "paden hier te plaatsen. Scheid meerdere scripts met een puntkomma. Scripts " -"krijgen als eerste argument het pad naar het gcode-bestand. Ze hebben ook " +"krijgen als eerste argument het pad naar het .gcode-bestand. Ze hebben ook " "toegang tot de configuratie-instellingen door het lezen van variabelen." -#: src/libslic3r/PrintConfig.cpp:2024 +#: src/libslic3r/PrintConfig.cpp:2023 msgid "Printer type" msgstr "Printertype" -#: src/libslic3r/PrintConfig.cpp:2025 +#: src/libslic3r/PrintConfig.cpp:2024 msgid "Type of the printer." msgstr "Type van de printer." -#: src/libslic3r/PrintConfig.cpp:2030 +#: src/libslic3r/PrintConfig.cpp:2029 msgid "Printer notes" msgstr "Printeropmerkingen" -#: src/libslic3r/PrintConfig.cpp:2031 +#: src/libslic3r/PrintConfig.cpp:2030 msgid "You can put your notes regarding the printer here." msgstr "Hier kunnen opmerkingen over de printer geplaatst worden." -#: src/libslic3r/PrintConfig.cpp:2039 +#: src/libslic3r/PrintConfig.cpp:2038 msgid "Printer vendor" msgstr "Printerleverancier" -#: src/libslic3r/PrintConfig.cpp:2040 +#: src/libslic3r/PrintConfig.cpp:2039 msgid "Name of the printer vendor." msgstr "Naam van de printerleverancier." -#: src/libslic3r/PrintConfig.cpp:2045 +#: src/libslic3r/PrintConfig.cpp:2044 msgid "Printer variant" msgstr "Printervariant" -#: src/libslic3r/PrintConfig.cpp:2046 +#: src/libslic3r/PrintConfig.cpp:2045 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." @@ -13039,38 +13113,38 @@ msgstr "" "Naam van de printervariant. De nozzlediameter kan bijvoorbeeld afwijken voor " "verschillende varianten." -#: src/libslic3r/PrintConfig.cpp:2063 +#: src/libslic3r/PrintConfig.cpp:2062 msgid "Raft contact Z distance" msgstr "Z-afstand voor raft" -#: src/libslic3r/PrintConfig.cpp:2065 +#: src/libslic3r/PrintConfig.cpp:2064 msgid "" "The vertical distance between object and raft. Ignored for soluble interface." msgstr "" "De verticale afstand tussen object en raft. Wordt genegeerd bij oplosbare " "interface." -#: src/libslic3r/PrintConfig.cpp:2072 +#: src/libslic3r/PrintConfig.cpp:2071 msgid "Raft expansion" msgstr "Raftuitbreiding" -#: src/libslic3r/PrintConfig.cpp:2074 +#: src/libslic3r/PrintConfig.cpp:2073 msgid "Expansion of the raft in XY plane for better stability." msgstr "Uitbreiding van de raft in het XY-vlak voor betere stabiliteit." -#: src/libslic3r/PrintConfig.cpp:2081 +#: src/libslic3r/PrintConfig.cpp:2080 msgid "First layer density" msgstr "Dichtheid eerste laag" -#: src/libslic3r/PrintConfig.cpp:2083 +#: src/libslic3r/PrintConfig.cpp:2082 msgid "Density of the first raft or support layer." msgstr "Dichtheid van de eerste raft- of supportlaag." -#: src/libslic3r/PrintConfig.cpp:2091 +#: src/libslic3r/PrintConfig.cpp:2090 msgid "First layer expansion" msgstr "Uitbreiding van eerste laag" -#: src/libslic3r/PrintConfig.cpp:2093 +#: src/libslic3r/PrintConfig.cpp:2092 msgid "" "Expansion of the first raft or support layer to improve adhesion to print " "bed." @@ -13078,11 +13152,11 @@ msgstr "" "Uitbreiding van de eerste raft- of supportlaag voor verbetering van de " "bedhechting." -#: src/libslic3r/PrintConfig.cpp:2100 +#: src/libslic3r/PrintConfig.cpp:2099 msgid "Raft layers" msgstr "Raftlagen" -#: src/libslic3r/PrintConfig.cpp:2102 +#: src/libslic3r/PrintConfig.cpp:2101 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." @@ -13090,11 +13164,11 @@ msgstr "" "Het object wordt verhoogd met dit aantal lagen. Support wordt onder het " "object gegenereerd." -#: src/libslic3r/PrintConfig.cpp:2110 +#: src/libslic3r/PrintConfig.cpp:2109 msgid "Slice resolution" msgstr "Slice-resolutie" -#: src/libslic3r/PrintConfig.cpp:2111 +#: src/libslic3r/PrintConfig.cpp:2110 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " @@ -13106,11 +13180,11 @@ msgstr "" "een hoge resolutie vragen meer van een printer dan mogelijk. Als dit " "ingesteld is op 0, wordt simplificatie uitgeschakeld." -#: src/libslic3r/PrintConfig.cpp:2121 +#: src/libslic3r/PrintConfig.cpp:2120 msgid "G-code resolution" msgstr "G-code-resolutie" -#: src/libslic3r/PrintConfig.cpp:2122 +#: src/libslic3r/PrintConfig.cpp:2121 msgid "" "Maximum deviation of exported G-code paths from their full resolution " "counterparts. Very high resolution G-code requires huge amount of RAM to " @@ -13128,22 +13202,22 @@ msgstr "" "reductie is toegepast per laag, kan dit zorgen voor oneffenheden tijdens het " "printen." -#: src/libslic3r/PrintConfig.cpp:2133 +#: src/libslic3r/PrintConfig.cpp:2132 msgid "Minimum travel after retraction" msgstr "Minimale beweging na retracten" -#: src/libslic3r/PrintConfig.cpp:2134 +#: src/libslic3r/PrintConfig.cpp:2133 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" "Retracten is niet geactiveerd als bewegingen korter zijn dan de hier " "ingevoerde lengte." -#: src/libslic3r/PrintConfig.cpp:2140 +#: src/libslic3r/PrintConfig.cpp:2139 msgid "Retract amount before wipe" msgstr "Retracthoeveelheid voor het afvegen" -#: src/libslic3r/PrintConfig.cpp:2141 +#: src/libslic3r/PrintConfig.cpp:2140 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." @@ -13151,23 +13225,23 @@ msgstr "" "Met bowden-extruders is het verstandig om een aantal maal snel te retracten " "voor het afvegen." -#: src/libslic3r/PrintConfig.cpp:2148 +#: src/libslic3r/PrintConfig.cpp:2147 msgid "Retract on layer change" msgstr "Retracten bij laagwisselingen" -#: src/libslic3r/PrintConfig.cpp:2149 +#: src/libslic3r/PrintConfig.cpp:2148 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "Dit vinkje geeft aan of wordt teruggetrokken bij een Z-beweging." -#: src/libslic3r/PrintConfig.cpp:2154 src/libslic3r/PrintConfig.cpp:2162 +#: src/libslic3r/PrintConfig.cpp:2153 src/libslic3r/PrintConfig.cpp:2161 msgid "Length" msgstr "Lengte" -#: src/libslic3r/PrintConfig.cpp:2155 +#: src/libslic3r/PrintConfig.cpp:2154 msgid "Retraction Length" msgstr "Retractielengte" -#: src/libslic3r/PrintConfig.cpp:2156 +#: src/libslic3r/PrintConfig.cpp:2155 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " @@ -13176,11 +13250,11 @@ msgstr "" "Als retracten is geactiveerd, wordt filament teruggetrokken op de ingestelde " "waarde (filamentlengte voor het de extruder in gaat)." -#: src/libslic3r/PrintConfig.cpp:2163 +#: src/libslic3r/PrintConfig.cpp:2162 msgid "Retraction Length (Toolchange)" msgstr "Retractielengte (toolwissel)" -#: src/libslic3r/PrintConfig.cpp:2164 +#: src/libslic3r/PrintConfig.cpp:2163 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " @@ -13190,11 +13264,11 @@ msgstr "" "teruggetrokken op de ingestelde waarde (filamentlengte voor het de extruder " "in gaat)." -#: src/libslic3r/PrintConfig.cpp:2172 +#: src/libslic3r/PrintConfig.cpp:2171 msgid "Lift Z" msgstr "Beweeg Z omhoog" -#: src/libslic3r/PrintConfig.cpp:2173 +#: src/libslic3r/PrintConfig.cpp:2172 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " @@ -13204,15 +13278,15 @@ msgstr "" "enigszins omhoog bij het retracten. Als meerdere extruders worden gebruikt, " "wordt alleen de instelling van de eerste extruder aangehouden." -#: src/libslic3r/PrintConfig.cpp:2180 +#: src/libslic3r/PrintConfig.cpp:2179 msgid "Above Z" msgstr "Boven Z" -#: src/libslic3r/PrintConfig.cpp:2181 +#: src/libslic3r/PrintConfig.cpp:2180 msgid "Only lift Z above" msgstr "Beweeg Z alleen omhoog boven" -#: src/libslic3r/PrintConfig.cpp:2182 +#: src/libslic3r/PrintConfig.cpp:2181 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " @@ -13222,15 +13296,15 @@ msgstr "" "ingestelde waarde omhoog bewegen voor het retracten. Deze kan aangepast " "worden om warping te voorkomen bij de eerste lagen." -#: src/libslic3r/PrintConfig.cpp:2189 +#: src/libslic3r/PrintConfig.cpp:2188 msgid "Below Z" msgstr "Onder Z" -#: src/libslic3r/PrintConfig.cpp:2190 +#: src/libslic3r/PrintConfig.cpp:2189 msgid "Only lift Z below" msgstr "Beweeg Z alleen omhoog onder" -#: src/libslic3r/PrintConfig.cpp:2191 +#: src/libslic3r/PrintConfig.cpp:2190 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " @@ -13239,11 +13313,11 @@ msgstr "" "Als dit ingesteld is op een positieve waarde, zal de nozzle alleen onder de " "ingestelde waarde omhoog bewegen bij het retracten." -#: src/libslic3r/PrintConfig.cpp:2199 src/libslic3r/PrintConfig.cpp:2207 +#: src/libslic3r/PrintConfig.cpp:2198 src/libslic3r/PrintConfig.cpp:2206 msgid "Extra length on restart" msgstr "Extra lengte bij herstart" -#: src/libslic3r/PrintConfig.cpp:2200 +#: src/libslic3r/PrintConfig.cpp:2199 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." @@ -13251,7 +13325,7 @@ msgstr "" "Als retracten wordt gecompenseerd na een beweging, wordt deze extra " "hoeveelheid filament geëxtrudeerd. Deze instelling is zelden van toepassing." -#: src/libslic3r/PrintConfig.cpp:2208 +#: src/libslic3r/PrintConfig.cpp:2207 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." @@ -13259,19 +13333,19 @@ msgstr "" "Als retracten wordt gecompenseerd na een toolwisseling, wordt deze extra " "hoeveelheid filament geëxtrudeerd." -#: src/libslic3r/PrintConfig.cpp:2215 src/libslic3r/PrintConfig.cpp:2216 +#: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2215 msgid "Retraction Speed" msgstr "Retractiesnelheid" -#: src/libslic3r/PrintConfig.cpp:2217 +#: src/libslic3r/PrintConfig.cpp:2216 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "De snelheid voor retracties (geldt alleen voor de extrudermotor)." -#: src/libslic3r/PrintConfig.cpp:2223 src/libslic3r/PrintConfig.cpp:2224 +#: src/libslic3r/PrintConfig.cpp:2222 src/libslic3r/PrintConfig.cpp:2223 msgid "Deretraction Speed" msgstr "Deretractiesnelheid" -#: src/libslic3r/PrintConfig.cpp:2225 +#: src/libslic3r/PrintConfig.cpp:2224 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " @@ -13281,74 +13355,74 @@ msgstr "" "voor de extrudermotor). Als dit ingesteld is op 0, wordt de " "retractiesnelheid gebruikt." -#: src/libslic3r/PrintConfig.cpp:2232 +#: src/libslic3r/PrintConfig.cpp:2231 msgid "Seam position" msgstr "Naadpositie" -#: src/libslic3r/PrintConfig.cpp:2234 +#: src/libslic3r/PrintConfig.cpp:2233 msgid "Position of perimeters starting points." msgstr "Startpuntpositie van perimeters." -#: src/libslic3r/PrintConfig.cpp:2240 +#: src/libslic3r/PrintConfig.cpp:2239 msgid "Random" msgstr "Willekeurig" -#: src/libslic3r/PrintConfig.cpp:2241 +#: src/libslic3r/PrintConfig.cpp:2240 msgid "Nearest" msgstr "Dichtstbijzijnd" -#: src/libslic3r/PrintConfig.cpp:2242 +#: src/libslic3r/PrintConfig.cpp:2241 msgid "Aligned" msgstr "Uitgelijnd" -#: src/libslic3r/PrintConfig.cpp:2250 +#: src/libslic3r/PrintConfig.cpp:2249 msgid "Direction" msgstr "Richting" -#: src/libslic3r/PrintConfig.cpp:2252 +#: src/libslic3r/PrintConfig.cpp:2251 msgid "Preferred direction of the seam" msgstr "Richtingsvoorkeur voor de naad" -#: src/libslic3r/PrintConfig.cpp:2253 +#: src/libslic3r/PrintConfig.cpp:2252 msgid "Seam preferred direction" msgstr "Richtingsvoorkeur voor de naad" -#: src/libslic3r/PrintConfig.cpp:2260 +#: src/libslic3r/PrintConfig.cpp:2259 msgid "Jitter" msgstr "Jitter" -#: src/libslic3r/PrintConfig.cpp:2262 +#: src/libslic3r/PrintConfig.cpp:2261 msgid "Seam preferred direction jitter" msgstr "Voorkeursrichting voor de naad - jitter" -#: src/libslic3r/PrintConfig.cpp:2263 +#: src/libslic3r/PrintConfig.cpp:2262 msgid "Preferred direction of the seam - jitter" msgstr "Voorkeursrichting voor de naad - jitter" -#: src/libslic3r/PrintConfig.cpp:2270 +#: src/libslic3r/PrintConfig.cpp:2269 msgid "Distance from brim/object" msgstr "Afstand van brim en object" -#: src/libslic3r/PrintConfig.cpp:2271 +#: src/libslic3r/PrintConfig.cpp:2270 msgid "" "Distance between skirt and brim (when draft shield is not used) or objects." msgstr "" "Afstand tussen de skirt en de brim of objecten (wanneer tochtscherm niet " "wordt gebruikt)." -#: src/libslic3r/PrintConfig.cpp:2277 +#: src/libslic3r/PrintConfig.cpp:2276 msgid "Skirt height" msgstr "Skirthoogte" -#: src/libslic3r/PrintConfig.cpp:2278 +#: src/libslic3r/PrintConfig.cpp:2277 msgid "Height of skirt expressed in layers." msgstr "Hoogte van de skirt uitgedrukt in het aantal lagen." -#: src/libslic3r/PrintConfig.cpp:2284 +#: src/libslic3r/PrintConfig.cpp:2283 msgid "Draft shield" msgstr "Tochtscherm" -#: src/libslic3r/PrintConfig.cpp:2285 +#: src/libslic3r/PrintConfig.cpp:2284 msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " "object, possibly intersecting brim.\n" @@ -13364,27 +13438,27 @@ msgstr "" "Dit is handig om een ABS of ASA print te beschermen tegen opkrullen en " "loslaten van het printbed door tocht." -#: src/libslic3r/PrintConfig.cpp:2293 +#: src/libslic3r/PrintConfig.cpp:2292 msgid "Disabled" msgstr "Uit" -#: src/libslic3r/PrintConfig.cpp:2294 +#: src/libslic3r/PrintConfig.cpp:2293 msgid "Limited" msgstr "Gelimiteerd" -#: src/libslic3r/PrintConfig.cpp:2295 +#: src/libslic3r/PrintConfig.cpp:2294 msgid "Enabled" msgstr "Aan" -#: src/libslic3r/PrintConfig.cpp:2300 +#: src/libslic3r/PrintConfig.cpp:2299 msgid "Loops (minimum)" msgstr "Rondgangen (minimaal)" -#: src/libslic3r/PrintConfig.cpp:2301 +#: src/libslic3r/PrintConfig.cpp:2300 msgid "Skirt Loops" msgstr "Rondgangen voor de skirt" -#: src/libslic3r/PrintConfig.cpp:2302 +#: src/libslic3r/PrintConfig.cpp:2301 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " @@ -13394,11 +13468,11 @@ msgstr "" "ingesteld kan dit aantal rondgangen groter zijn dan hier is ingesteld. Als " "dit ingesteld is op 0, wordt de skirt uitgeschakeld." -#: src/libslic3r/PrintConfig.cpp:2310 +#: src/libslic3r/PrintConfig.cpp:2309 msgid "Slow down if layer print time is below" msgstr "Vertraag bij een kortere laagprinttijd dan" -#: src/libslic3r/PrintConfig.cpp:2311 +#: src/libslic3r/PrintConfig.cpp:2310 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." @@ -13406,11 +13480,11 @@ msgstr "" "Als de laagprinttijd wordt berekend onder dit aantal seconden, wordt de " "printsnelheid verlaagd om de laagprinttijd te verlengen." -#: src/libslic3r/PrintConfig.cpp:2320 +#: src/libslic3r/PrintConfig.cpp:2319 msgid "Small perimeters" msgstr "Smalle perimeters" -#: src/libslic3r/PrintConfig.cpp:2322 +#: src/libslic3r/PrintConfig.cpp:2321 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " @@ -13421,11 +13495,11 @@ msgstr "" "wordt deze genomen over de snelheid van de perimeters. Als dit ingesteld is " "op 0, wordt een automatische snelheid genomen." -#: src/libslic3r/PrintConfig.cpp:2332 +#: src/libslic3r/PrintConfig.cpp:2331 msgid "Solid infill threshold area" msgstr "Dichte vulling bij oppervlak" -#: src/libslic3r/PrintConfig.cpp:2334 +#: src/libslic3r/PrintConfig.cpp:2333 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." @@ -13433,23 +13507,23 @@ msgstr "" "Forceer dichte vulling voor delen met een kleiner doorsnee-oppervlak dan de " "hier ingestelde waarde." -#: src/libslic3r/PrintConfig.cpp:2335 +#: src/libslic3r/PrintConfig.cpp:2334 msgid "mm²" msgstr "mm²" -#: src/libslic3r/PrintConfig.cpp:2341 +#: src/libslic3r/PrintConfig.cpp:2340 msgid "Solid infill extruder" msgstr "Extruder voor dichte vulling" -#: src/libslic3r/PrintConfig.cpp:2343 +#: src/libslic3r/PrintConfig.cpp:2342 msgid "The extruder to use when printing solid infill." msgstr "De extruder die gebruikt wordt voor het printen van dichte vullingen." -#: src/libslic3r/PrintConfig.cpp:2349 +#: src/libslic3r/PrintConfig.cpp:2348 msgid "Solid infill every" msgstr "Dichte vulling elke" -#: src/libslic3r/PrintConfig.cpp:2351 +#: src/libslic3r/PrintConfig.cpp:2350 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " @@ -13461,7 +13535,7 @@ msgstr "" "waarde; PrusaSlicer zal dan automatisch het maximaal aantal lagen kiezen om " "te combineren op basis van de nozzlediameter en de laagdikte." -#: src/libslic3r/PrintConfig.cpp:2363 +#: src/libslic3r/PrintConfig.cpp:2362 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " @@ -13473,7 +13547,7 @@ msgstr "" "breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als " "percentage, wordt dit berekend over de laagdikte." -#: src/libslic3r/PrintConfig.cpp:2375 +#: src/libslic3r/PrintConfig.cpp:2374 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " @@ -13483,19 +13557,19 @@ msgstr "" "dit berekend over de standaard vullingssnelheid. Als dit ingesteld is op 0, " "worden automatische waarden genomen." -#: src/libslic3r/PrintConfig.cpp:2387 +#: src/libslic3r/PrintConfig.cpp:2386 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "Aantal te genereren dichte lagen voor boven- en ondervlakken." -#: src/libslic3r/PrintConfig.cpp:2393 src/libslic3r/PrintConfig.cpp:2394 +#: src/libslic3r/PrintConfig.cpp:2392 src/libslic3r/PrintConfig.cpp:2393 msgid "Minimum thickness of a top / bottom shell" msgstr "Minimale dikte van top-/bodemshell" -#: src/libslic3r/PrintConfig.cpp:2400 +#: src/libslic3r/PrintConfig.cpp:2399 msgid "Spiral vase" msgstr "Spiraalmodus" -#: src/libslic3r/PrintConfig.cpp:2401 +#: src/libslic3r/PrintConfig.cpp:2400 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " @@ -13510,11 +13584,11 @@ msgstr "" "skirt- en brimrondgangen. Het werkt niet bij het printen van meer dan één " "object." -#: src/libslic3r/PrintConfig.cpp:2409 +#: src/libslic3r/PrintConfig.cpp:2408 msgid "Temperature variation" msgstr "Temperatuurverschil" -#: src/libslic3r/PrintConfig.cpp:2410 +#: src/libslic3r/PrintConfig.cpp:2409 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " @@ -13523,7 +13597,7 @@ msgstr "" "Temperatuurverschil dat wordt toegepast als een extruder niet actief is. Dit " "genereert een afveegblok waarop de nozzle wordt schoongeveegd." -#: src/libslic3r/PrintConfig.cpp:2420 +#: src/libslic3r/PrintConfig.cpp:2419 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " @@ -13541,7 +13615,7 @@ msgstr "" "andere aangepaste acties aan te passen. Merk op dat u voor alle PrusaSlicer-" "instellingen variabelen kunt gebruiken." -#: src/libslic3r/PrintConfig.cpp:2435 +#: src/libslic3r/PrintConfig.cpp:2434 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " @@ -13564,47 +13638,47 @@ msgstr "" "meerdere extruders hebt, wordt de G-code in de volgorde van de extruders " "verwerkt." -#: src/libslic3r/PrintConfig.cpp:2451 +#: src/libslic3r/PrintConfig.cpp:2450 msgid "Color change G-code" msgstr "Kleurwissel-G-code" -#: src/libslic3r/PrintConfig.cpp:2452 +#: src/libslic3r/PrintConfig.cpp:2451 msgid "This G-code will be used as a code for the color change" msgstr "Deze G-code wordt gebruikt voor een kleurwisseling" -#: src/libslic3r/PrintConfig.cpp:2461 +#: src/libslic3r/PrintConfig.cpp:2460 msgid "This G-code will be used as a code for the pause print" msgstr "Deze G-code wordt gebruikt bij het pauzeren van de print" -#: src/libslic3r/PrintConfig.cpp:2470 +#: src/libslic3r/PrintConfig.cpp:2469 msgid "This G-code will be used as a custom code" msgstr "Deze G-code wordt gebruikt als custom G-code" -#: src/libslic3r/PrintConfig.cpp:2478 +#: src/libslic3r/PrintConfig.cpp:2477 msgid "Single Extruder Multi Material" msgstr "Multi-material met één extruder" -#: src/libslic3r/PrintConfig.cpp:2479 +#: src/libslic3r/PrintConfig.cpp:2478 msgid "The printer multiplexes filaments into a single hot end." msgstr "De printer mengt filament in een enkele extruder." -#: src/libslic3r/PrintConfig.cpp:2484 +#: src/libslic3r/PrintConfig.cpp:2483 msgid "Prime all printing extruders" msgstr "Veeg alle printextruders af" -#: src/libslic3r/PrintConfig.cpp:2485 +#: src/libslic3r/PrintConfig.cpp:2484 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" "Alle extruders worden afgeveegd aan de voorzijde van het printbed aan het " -"begin van de print als dit aanstaat." +"begin van de print als dit is ingeschakeld." -#: src/libslic3r/PrintConfig.cpp:2490 +#: src/libslic3r/PrintConfig.cpp:2489 msgid "No sparse layers (EXPERIMENTAL)" msgstr "Geen smalle lagen (experimenteel)" -#: src/libslic3r/PrintConfig.cpp:2491 +#: src/libslic3r/PrintConfig.cpp:2490 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " @@ -13616,11 +13690,11 @@ msgstr "" "bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele " "botsingen met de print." -#: src/libslic3r/PrintConfig.cpp:2498 +#: src/libslic3r/PrintConfig.cpp:2497 msgid "Slice gap closing radius" msgstr "Gatvulradius" -#: src/libslic3r/PrintConfig.cpp:2500 +#: src/libslic3r/PrintConfig.cpp:2499 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " @@ -13630,11 +13704,11 @@ msgstr "" "het slicen. Het vullen kan zorgen dat de printresolutie minder wordt. Daarom " "wordt geadviseerd de waarde laag te houden." -#: src/libslic3r/PrintConfig.cpp:2508 +#: src/libslic3r/PrintConfig.cpp:2507 msgid "Slicing Mode" msgstr "Slicemodus" -#: src/libslic3r/PrintConfig.cpp:2510 +#: src/libslic3r/PrintConfig.cpp:2509 msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." @@ -13642,31 +13716,31 @@ msgstr "" "Gebruik \"even-oneven\" voor 3DLabPrint vliegtuigmodellen. Gebruik \"Sluit " "gaten\" om alle gaten in het model te vullen." -#: src/libslic3r/PrintConfig.cpp:2515 +#: src/libslic3r/PrintConfig.cpp:2514 msgid "Regular" msgstr "Normaal" -#: src/libslic3r/PrintConfig.cpp:2516 +#: src/libslic3r/PrintConfig.cpp:2515 msgid "Even-odd" msgstr "Even-oneven" -#: src/libslic3r/PrintConfig.cpp:2517 +#: src/libslic3r/PrintConfig.cpp:2516 msgid "Close holes" msgstr "Sluit gaten" -#: src/libslic3r/PrintConfig.cpp:2522 +#: src/libslic3r/PrintConfig.cpp:2521 msgid "Generate support material" msgstr "Genereer support" -#: src/libslic3r/PrintConfig.cpp:2524 +#: src/libslic3r/PrintConfig.cpp:2523 msgid "Enable support material generation." msgstr "Sta de generatie van support toe." -#: src/libslic3r/PrintConfig.cpp:2528 +#: src/libslic3r/PrintConfig.cpp:2527 msgid "Auto generated supports" msgstr "Automatisch gegenereerd support" -#: src/libslic3r/PrintConfig.cpp:2530 +#: src/libslic3r/PrintConfig.cpp:2529 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " @@ -13675,11 +13749,11 @@ msgstr "" "Support wordt automatisch gegenereerd als dit aan staat. Als dit niet " "aanstaat zal support alleen bij supportforceringen gegenereerd worden." -#: src/libslic3r/PrintConfig.cpp:2536 +#: src/libslic3r/PrintConfig.cpp:2535 msgid "XY separation between an object and its support" msgstr "Horizontale ruimte tussen het object en het support" -#: src/libslic3r/PrintConfig.cpp:2538 +#: src/libslic3r/PrintConfig.cpp:2537 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." @@ -13687,17 +13761,17 @@ msgstr "" "Horizontale ruimte tussen object en support. Als dit is uitgedrukt als " "percentage, wordt deze berekend over de breedte van de buitenste perimeter." -#: src/libslic3r/PrintConfig.cpp:2549 +#: src/libslic3r/PrintConfig.cpp:2548 msgid "Pattern angle" msgstr "Patroonhoek" -#: src/libslic3r/PrintConfig.cpp:2551 +#: src/libslic3r/PrintConfig.cpp:2550 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "Gebruik deze instelling om het patroon van het support te draaien." -#: src/libslic3r/PrintConfig.cpp:2561 src/libslic3r/PrintConfig.cpp:3616 +#: src/libslic3r/PrintConfig.cpp:2560 src/libslic3r/PrintConfig.cpp:3615 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." @@ -13705,11 +13779,11 @@ msgstr "" "Genereer alleen support als dit op het bed geplaatst wordt, dus niet op de " "print zelf." -#: src/libslic3r/PrintConfig.cpp:2567 +#: src/libslic3r/PrintConfig.cpp:2566 msgid "Top contact Z distance" msgstr "Z-afstand aan de bovenkant" -#: src/libslic3r/PrintConfig.cpp:2569 +#: src/libslic3r/PrintConfig.cpp:2568 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " @@ -13719,23 +13793,23 @@ msgstr "" "PrusaSlicer bruginstellingen gebruikt voor de eerste laag boven de " "supportinterface." -#: src/libslic3r/PrintConfig.cpp:2577 +#: src/libslic3r/PrintConfig.cpp:2576 msgid "0 (soluble)" msgstr "0 (oplosbaar)" -#: src/libslic3r/PrintConfig.cpp:2578 +#: src/libslic3r/PrintConfig.cpp:2577 msgid "0.1 (detachable)" msgstr "0,1 (losbreekbaar)" -#: src/libslic3r/PrintConfig.cpp:2579 +#: src/libslic3r/PrintConfig.cpp:2578 msgid "0.2 (detachable)" msgstr "0,2 (losbreekbaar)" -#: src/libslic3r/PrintConfig.cpp:2585 +#: src/libslic3r/PrintConfig.cpp:2584 msgid "Bottom contact Z distance" msgstr "Z-afstand aan de onderkant" -#: src/libslic3r/PrintConfig.cpp:2587 +#: src/libslic3r/PrintConfig.cpp:2586 msgid "" "The vertical distance between the object top surface and the support " "material interface. If set to zero, support_material_contact_distance will " @@ -13747,15 +13821,15 @@ msgstr "" #. TRN To be shown in Print Settings "Bottom contact Z distance". Have to be as short as possible #. TRN To be shown in Print Settings "Bottom interface layers". Have to be as short as possible -#: src/libslic3r/PrintConfig.cpp:2595 src/libslic3r/PrintConfig.cpp:2680 +#: src/libslic3r/PrintConfig.cpp:2594 src/libslic3r/PrintConfig.cpp:2679 msgid "Same as top" msgstr "Zelfde als bovenkant" -#: src/libslic3r/PrintConfig.cpp:2602 +#: src/libslic3r/PrintConfig.cpp:2601 msgid "Enforce support for the first" msgstr "Forceer support voor de eerste" -#: src/libslic3r/PrintConfig.cpp:2604 +#: src/libslic3r/PrintConfig.cpp:2603 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " @@ -13767,15 +13841,15 @@ msgstr "" "waarbij de ingesteld hoek wordt aangehouden. Dit is handig om meer hechting " "op het bed te verkrijgen bij objecten met een klein contactoppervlak." -#: src/libslic3r/PrintConfig.cpp:2609 +#: src/libslic3r/PrintConfig.cpp:2608 msgid "Enforce support for the first n layers" msgstr "Forceer support voor de eerste n lagen" -#: src/libslic3r/PrintConfig.cpp:2615 +#: src/libslic3r/PrintConfig.cpp:2614 msgid "Support material/raft/skirt extruder" msgstr "Extruder voor support/raft/skirt" -#: src/libslic3r/PrintConfig.cpp:2617 +#: src/libslic3r/PrintConfig.cpp:2616 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." @@ -13783,7 +13857,7 @@ msgstr "" "De extruder die gebruikt wordt voor support, raft en skirt (stel in op 1 of " "op 0 om de huidige extruder te gebruiken)." -#: src/libslic3r/PrintConfig.cpp:2626 +#: src/libslic3r/PrintConfig.cpp:2625 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " @@ -13795,22 +13869,22 @@ msgstr "" "zelf bepalen op basis van de nozzlediameter. Als dit is uitgedrukt als " "percentage, wordt dit berekend over de laagdikte." -#: src/libslic3r/PrintConfig.cpp:2636 +#: src/libslic3r/PrintConfig.cpp:2635 msgid "Interface loops" msgstr "Interface rondgangen" -#: src/libslic3r/PrintConfig.cpp:2638 +#: src/libslic3r/PrintConfig.cpp:2637 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" "Bedek de bovenste interfacelagen van het support met rondgangen. Dit staat " "standaard uit." -#: src/libslic3r/PrintConfig.cpp:2643 +#: src/libslic3r/PrintConfig.cpp:2642 msgid "Support material/raft interface extruder" msgstr "Extruder voor supportinterfacce en de bovenlaag van de raft" -#: src/libslic3r/PrintConfig.cpp:2645 +#: src/libslic3r/PrintConfig.cpp:2644 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." @@ -13819,37 +13893,37 @@ msgstr "" "dan 1 of op 0 om de huidige extruder te gebruiken voor minder " "toolwisselingen). Dit heeft ook effect op de raft." -#: src/libslic3r/PrintConfig.cpp:2653 +#: src/libslic3r/PrintConfig.cpp:2652 msgid "Top interface layers" msgstr "Interfacelagen bovenkant" -#: src/libslic3r/PrintConfig.cpp:2655 +#: src/libslic3r/PrintConfig.cpp:2654 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "Aantal interfacelagen tussen het support en het object." -#: src/libslic3r/PrintConfig.cpp:2662 +#: src/libslic3r/PrintConfig.cpp:2661 msgid "0 (off)" msgstr "0 (uit)" -#: src/libslic3r/PrintConfig.cpp:2663 +#: src/libslic3r/PrintConfig.cpp:2662 msgid "1 (light)" msgstr "1 (licht)" -#: src/libslic3r/PrintConfig.cpp:2664 +#: src/libslic3r/PrintConfig.cpp:2663 msgid "2 (default)" msgstr "2 (standaard)" -#: src/libslic3r/PrintConfig.cpp:2665 +#: src/libslic3r/PrintConfig.cpp:2664 msgid "3 (heavy)" msgstr "3 (zwaar)" -#: src/libslic3r/PrintConfig.cpp:2671 +#: src/libslic3r/PrintConfig.cpp:2670 msgid "Bottom interface layers" msgstr "Interfacelagen onderkant" -#: src/libslic3r/PrintConfig.cpp:2673 +#: src/libslic3r/PrintConfig.cpp:2672 msgid "" "Number of interface layers to insert between the object(s) and support " "material. Set to -1 to use support_material_interface_layers" @@ -13857,11 +13931,11 @@ msgstr "" "Het aantal interfacelagen tussen de objecten en het supportmateriaal. Stel " "in op -1 om evenveel lagen als op bovenkant te gebruiken" -#: src/libslic3r/PrintConfig.cpp:2686 +#: src/libslic3r/PrintConfig.cpp:2685 msgid "Closing radius" msgstr "Sluitradius" -#: src/libslic3r/PrintConfig.cpp:2688 +#: src/libslic3r/PrintConfig.cpp:2687 msgid "" "For snug supports, the support regions will be merged using morphological " "closing operation. Gaps smaller than the closing radius will be filled in." @@ -13869,17 +13943,17 @@ msgstr "" "Voor handvaste supports worden supportdelen samengevoegd met een " "morfologische sluitmethode. Gaten kleiner dan de sluitradius worden gevuld." -#: src/libslic3r/PrintConfig.cpp:2696 +#: src/libslic3r/PrintConfig.cpp:2695 msgid "Interface pattern spacing" msgstr "Tussenafstand voor interface" -#: src/libslic3r/PrintConfig.cpp:2698 +#: src/libslic3r/PrintConfig.cpp:2697 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" "Ruimte tussen lijnen van supportinterface. Als dit ingesteld is op 0, wordt " "een dichte supportinterface gegenereerd." -#: src/libslic3r/PrintConfig.cpp:2707 +#: src/libslic3r/PrintConfig.cpp:2706 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " @@ -13888,23 +13962,23 @@ msgstr "" "Printsnelheid van supportinterfacelagen. Als dit is uitgedrukt als " "percentage, wordt dit berekend over de snelheid van het support." -#: src/libslic3r/PrintConfig.cpp:2716 +#: src/libslic3r/PrintConfig.cpp:2715 msgid "Pattern" msgstr "Patroon" -#: src/libslic3r/PrintConfig.cpp:2718 +#: src/libslic3r/PrintConfig.cpp:2717 msgid "Pattern used to generate support material." msgstr "Patroon dat gebruikt wordt voor het support." -#: src/libslic3r/PrintConfig.cpp:2724 +#: src/libslic3r/PrintConfig.cpp:2723 msgid "Rectilinear grid" msgstr "Rechtlijnig raster" -#: src/libslic3r/PrintConfig.cpp:2730 +#: src/libslic3r/PrintConfig.cpp:2729 msgid "Interface pattern" msgstr "Interfacepatroon" -#: src/libslic3r/PrintConfig.cpp:2732 +#: src/libslic3r/PrintConfig.cpp:2731 msgid "" "Pattern used to generate support material interface. Default pattern for non-" "soluble support interface is Rectilinear, while default pattern for soluble " @@ -13914,23 +13988,23 @@ msgstr "" "niet-oplosbaar support is rechtlijnig, terwijl het patroon voor oplosbaar " "support concentrisch is." -#: src/libslic3r/PrintConfig.cpp:2746 +#: src/libslic3r/PrintConfig.cpp:2745 msgid "Pattern spacing" msgstr "Tussenafstand van het patroon" -#: src/libslic3r/PrintConfig.cpp:2748 +#: src/libslic3r/PrintConfig.cpp:2747 msgid "Spacing between support material lines." msgstr "Afstand tussen supportlijnen." -#: src/libslic3r/PrintConfig.cpp:2757 +#: src/libslic3r/PrintConfig.cpp:2756 msgid "Speed for printing support material." msgstr "Printsnelheid voor support." -#: src/libslic3r/PrintConfig.cpp:2764 +#: src/libslic3r/PrintConfig.cpp:2763 msgid "Style" msgstr "Type" -#: src/libslic3r/PrintConfig.cpp:2766 +#: src/libslic3r/PrintConfig.cpp:2765 msgid "" "Style and shape of the support towers. Projecting the supports into a " "regular grid will create more stable supports, while snug support towers " @@ -13940,15 +14014,15 @@ msgstr "" "regelmatig raster creëert stabielere supports, terwijl handvaste supports " "materiaal besparen en een lelijk oppervlak reduceert." -#: src/libslic3r/PrintConfig.cpp:2773 +#: src/libslic3r/PrintConfig.cpp:2772 msgid "Snug" msgstr "Handvast" -#: src/libslic3r/PrintConfig.cpp:2778 +#: src/libslic3r/PrintConfig.cpp:2777 msgid "Synchronize with object layers" msgstr "Synchroniseer met objectlagen" -#: src/libslic3r/PrintConfig.cpp:2780 +#: src/libslic3r/PrintConfig.cpp:2779 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." @@ -13956,11 +14030,11 @@ msgstr "" "Synchroniseer de supportlagen met de objectlagen. Dit is handig voor multi-" "materialprinters waar een toolwissel duur is." -#: src/libslic3r/PrintConfig.cpp:2786 +#: src/libslic3r/PrintConfig.cpp:2785 msgid "Overhang threshold" msgstr "Maximale overhanghoek" -#: src/libslic3r/PrintConfig.cpp:2788 +#: src/libslic3r/PrintConfig.cpp:2787 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " @@ -13973,11 +14047,11 @@ msgstr "" "geprint moet worden met support. Als dit ingesteld is op 0, wordt dit " "automatisch gedetecteerd (aanbevolen)." -#: src/libslic3r/PrintConfig.cpp:2800 +#: src/libslic3r/PrintConfig.cpp:2799 msgid "With sheath around the support" msgstr "Met schild rond het support" -#: src/libslic3r/PrintConfig.cpp:2802 +#: src/libslic3r/PrintConfig.cpp:2801 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." @@ -13985,7 +14059,7 @@ msgstr "" "Voeg een schild (één perimeterlijn) rondom het support toe. Dit maakt het " "support betrouwbaarder maar ook moeilijker te verwijderen." -#: src/libslic3r/PrintConfig.cpp:2809 +#: src/libslic3r/PrintConfig.cpp:2808 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." @@ -13993,29 +14067,29 @@ msgstr "" "Nozzletemperatuur voor lagen na de eerste laag. Stel in op 0 om " "temperatuurregeling uit te zetten in de G-code." -#: src/libslic3r/PrintConfig.cpp:2812 +#: src/libslic3r/PrintConfig.cpp:2811 msgid "Nozzle temperature" msgstr "Nozzletemperatuur" -#: src/libslic3r/PrintConfig.cpp:2818 +#: src/libslic3r/PrintConfig.cpp:2817 msgid "Thick bridges" msgstr "Dikke bruggen" -#: src/libslic3r/PrintConfig.cpp:2820 +#: src/libslic3r/PrintConfig.cpp:2819 msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" -"Als dit aanstaat worden bruggen betrouwbaarder, kunnen langere bruggen " -"printen, maar er minder mooi uitzien. Als dit uitstaat zien bruggen er beter " -"uit, maar zijn alleen betrouwbaar over korte afstanden." +"Als dit is ingeschakeld worden bruggen betrouwbaarder, kunnen langere " +"bruggen printen, maar er minder mooi uitzien. Als dit uitstaat zien bruggen " +"er beter uit, maar zijn alleen betrouwbaar over korte afstanden." -#: src/libslic3r/PrintConfig.cpp:2826 +#: src/libslic3r/PrintConfig.cpp:2825 msgid "Detect thin walls" msgstr "Detecteer dunne wanden" -#: src/libslic3r/PrintConfig.cpp:2828 +#: src/libslic3r/PrintConfig.cpp:2827 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." @@ -14023,11 +14097,11 @@ msgstr "" "Detecteer éénlijnige wanden (delen waar 2 extrusielijnen niet passen en dit " "geprint moet worden met 1 lijn)." -#: src/libslic3r/PrintConfig.cpp:2834 +#: src/libslic3r/PrintConfig.cpp:2833 msgid "Threads" -msgstr "Meerdere processen" +msgstr "Processen" -#: src/libslic3r/PrintConfig.cpp:2835 +#: src/libslic3r/PrintConfig.cpp:2834 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." @@ -14036,7 +14110,7 @@ msgstr "" "draaien. Het optimaal aantal processen is vlak boven het aanwezige aantal " "kernen/processoren." -#: src/libslic3r/PrintConfig.cpp:2847 +#: src/libslic3r/PrintConfig.cpp:2846 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} " @@ -14052,7 +14126,7 @@ msgstr "" "(zoals T{next_extruder}), zal PrusaSlicer deze verder negeren. Het is daarom " "mogelijk om een custom script toe te passen voor en na de toolwisseling." -#: src/libslic3r/PrintConfig.cpp:2860 +#: src/libslic3r/PrintConfig.cpp:2859 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " @@ -14065,7 +14139,7 @@ msgstr "" "extrudaat in smalle gebieden voor een gladdere afwerking. Als dit is " "uitgedrukt als percentage, wordt dit berekend over de laagdikte." -#: src/libslic3r/PrintConfig.cpp:2873 +#: src/libslic3r/PrintConfig.cpp:2872 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " @@ -14079,15 +14153,15 @@ msgstr "" "vullingssnelheid. Als dit ingesteld is op 0, wordt een automatische snelheid " "genomen." -#: src/libslic3r/PrintConfig.cpp:2888 +#: src/libslic3r/PrintConfig.cpp:2887 msgid "Number of solid layers to generate on top surfaces." msgstr "Aantal te genereren dichte lagen voor bovenvlakken." -#: src/libslic3r/PrintConfig.cpp:2889 +#: src/libslic3r/PrintConfig.cpp:2888 msgid "Top solid layers" msgstr "Bovenste dichte vulling" -#: src/libslic3r/PrintConfig.cpp:2897 +#: src/libslic3r/PrintConfig.cpp:2896 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " @@ -14097,19 +14171,19 @@ msgstr "" "de minimale shelldikte te garanderen. Dit is handig om kussenvorming te " "voorkomen bij het printen met variabele laagdikte." -#: src/libslic3r/PrintConfig.cpp:2900 +#: src/libslic3r/PrintConfig.cpp:2899 msgid "Minimum top shell thickness" msgstr "Minimale shelldikte aan de bovenzijde" -#: src/libslic3r/PrintConfig.cpp:2907 +#: src/libslic3r/PrintConfig.cpp:2906 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "Bewegingssnelheid als niet geëxtrudeerd wordt." -#: src/libslic3r/PrintConfig.cpp:2915 +#: src/libslic3r/PrintConfig.cpp:2914 msgid "Z travel" msgstr "Z-beweging" -#: src/libslic3r/PrintConfig.cpp:2916 +#: src/libslic3r/PrintConfig.cpp:2915 msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " @@ -14119,11 +14193,11 @@ msgstr "" "Als dit ingesteld is op 0, zal de waarde worden genegeerd en " "standaardwaarden worden gebruikt." -#: src/libslic3r/PrintConfig.cpp:2924 +#: src/libslic3r/PrintConfig.cpp:2923 msgid "Use firmware retraction" msgstr "Gebruik de firmware-retractie" -#: src/libslic3r/PrintConfig.cpp:2925 +#: src/libslic3r/PrintConfig.cpp:2924 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." @@ -14132,11 +14206,11 @@ msgstr "" "retracten in de firmware. Dit wordt alleen ondersteunt bij de recente Marlin-" "variant." -#: src/libslic3r/PrintConfig.cpp:2931 +#: src/libslic3r/PrintConfig.cpp:2930 msgid "Use relative E distances" msgstr "Gebruik relatieve E-waarden" -#: src/libslic3r/PrintConfig.cpp:2932 +#: src/libslic3r/PrintConfig.cpp:2931 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." @@ -14144,11 +14218,11 @@ msgstr "" "Als uw firmware relatieve extrusiewaarden nodig heeft, vink dit dan aan. " "Laat het ander uit staan. De meeste firmware gebruiken absolute waarden." -#: src/libslic3r/PrintConfig.cpp:2938 +#: src/libslic3r/PrintConfig.cpp:2937 msgid "Use volumetric E" msgstr "Gebruik volumetrische E-waarden" -#: src/libslic3r/PrintConfig.cpp:2939 +#: src/libslic3r/PrintConfig.cpp:2938 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " @@ -14165,11 +14239,11 @@ msgstr "" "filamentinstellingen. Dit wordt alleen ondersteund in de recente Marlin-" "variant." -#: src/libslic3r/PrintConfig.cpp:2949 +#: src/libslic3r/PrintConfig.cpp:2948 msgid "Enable variable layer height feature" msgstr "Variabele laagdikte toestaan" -#: src/libslic3r/PrintConfig.cpp:2950 +#: src/libslic3r/PrintConfig.cpp:2949 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." @@ -14177,11 +14251,11 @@ msgstr "" "Sommige printers of printersetups kunnen niet printen met een variabele " "laagdikte. Staat standaard aan." -#: src/libslic3r/PrintConfig.cpp:2956 +#: src/libslic3r/PrintConfig.cpp:2955 msgid "Wipe while retracting" msgstr "Veeg af bij het retracten" -#: src/libslic3r/PrintConfig.cpp:2957 +#: src/libslic3r/PrintConfig.cpp:2956 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." @@ -14189,7 +14263,7 @@ msgstr "" "Als u dit aanvinkt beweegt de nozzle tijdens het retracten om een blob of " "lekkende extruders tegen te gaan." -#: src/libslic3r/PrintConfig.cpp:2964 +#: src/libslic3r/PrintConfig.cpp:2963 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." @@ -14197,11 +14271,11 @@ msgstr "" "Multi-materialprinters moeten afvegen bij toolwisselingen. Extrudeer het " "overtollige materiaal op het afveegblok." -#: src/libslic3r/PrintConfig.cpp:2970 +#: src/libslic3r/PrintConfig.cpp:2969 msgid "Purging volumes - load/unload volumes" msgstr "Afveegvolume - laad/ontlaad volumes" -#: src/libslic3r/PrintConfig.cpp:2971 +#: src/libslic3r/PrintConfig.cpp:2970 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " @@ -14212,11 +14286,11 @@ msgstr "" "het creëren van de onderstaande volledige reinigingsvolumes te " "vereenvoudigen." -#: src/libslic3r/PrintConfig.cpp:2977 +#: src/libslic3r/PrintConfig.cpp:2976 msgid "Purging volumes - matrix" msgstr "Afveegvolume - matrix" -#: src/libslic3r/PrintConfig.cpp:2978 +#: src/libslic3r/PrintConfig.cpp:2977 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." @@ -14224,43 +14298,43 @@ msgstr "" "Deze matrix beschrijft volume (in mm³) dat is vereist om nieuw filament af " "te vegen aan het afveegblok voor elk paar van extruders." -#: src/libslic3r/PrintConfig.cpp:2987 +#: src/libslic3r/PrintConfig.cpp:2986 msgid "Position X" msgstr "X-positie" -#: src/libslic3r/PrintConfig.cpp:2988 +#: src/libslic3r/PrintConfig.cpp:2987 msgid "X coordinate of the left front corner of a wipe tower" msgstr "X-coördinaat van de linkervoorhoek van het afveegblok" -#: src/libslic3r/PrintConfig.cpp:2994 +#: src/libslic3r/PrintConfig.cpp:2993 msgid "Position Y" msgstr "Y-positie" -#: src/libslic3r/PrintConfig.cpp:2995 +#: src/libslic3r/PrintConfig.cpp:2994 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "Y-coördinaat van de linkervoorhoek van het afveegblok" -#: src/libslic3r/PrintConfig.cpp:3002 +#: src/libslic3r/PrintConfig.cpp:3001 msgid "Width of a wipe tower" msgstr "Breedte van het afveegblok" -#: src/libslic3r/PrintConfig.cpp:3008 +#: src/libslic3r/PrintConfig.cpp:3007 msgid "Wipe tower rotation angle" msgstr "Rotatie van het afveegblok" -#: src/libslic3r/PrintConfig.cpp:3009 +#: src/libslic3r/PrintConfig.cpp:3008 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "Rotatie van het afveegblok ten opzichte van de X-as." -#: src/libslic3r/PrintConfig.cpp:3015 src/libslic3r/PrintConfig.cpp:3016 +#: src/libslic3r/PrintConfig.cpp:3014 src/libslic3r/PrintConfig.cpp:3015 msgid "Wipe tower brim width" msgstr "Brimbreedte van het afveegblok" -#: src/libslic3r/PrintConfig.cpp:3024 +#: src/libslic3r/PrintConfig.cpp:3023 msgid "Wipe into this object's infill" msgstr "Afvegen in de vulling van het object" -#: src/libslic3r/PrintConfig.cpp:3025 +#: src/libslic3r/PrintConfig.cpp:3024 msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " @@ -14270,11 +14344,11 @@ msgstr "" "reduceert de hoeveelheid afval, maar kan resulteren in langere printtijden " "door meer bewegingen." -#: src/libslic3r/PrintConfig.cpp:3032 +#: src/libslic3r/PrintConfig.cpp:3031 msgid "Wipe into this object" msgstr "Afvegen in dit object" -#: src/libslic3r/PrintConfig.cpp:3033 +#: src/libslic3r/PrintConfig.cpp:3032 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " @@ -14284,19 +14358,19 @@ msgstr "" "materiaal dat anders in het afveegblok gebruikt wordt te besparen. Kleuren " "kunnen dan gemengd worden." -#: src/libslic3r/PrintConfig.cpp:3039 +#: src/libslic3r/PrintConfig.cpp:3038 msgid "Maximal bridging distance" msgstr "Maximale brugafstand" -#: src/libslic3r/PrintConfig.cpp:3040 +#: src/libslic3r/PrintConfig.cpp:3039 msgid "Maximal distance between supports on sparse infill sections." msgstr "Maximale afstand tussen support op dunne vullingsdelen." -#: src/libslic3r/PrintConfig.cpp:3046 +#: src/libslic3r/PrintConfig.cpp:3045 msgid "XY Size Compensation" msgstr "Compensatie voor X- en Y-grootte" -#: src/libslic3r/PrintConfig.cpp:3048 +#: src/libslic3r/PrintConfig.cpp:3047 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" @@ -14306,11 +14380,11 @@ msgstr "" "waarde (negatief = naar binnen, positief = naar buiten). Dit kan handig zijn " "voor het verfijnen van gaten." -#: src/libslic3r/PrintConfig.cpp:3056 +#: src/libslic3r/PrintConfig.cpp:3055 msgid "Z offset" msgstr "Z-hoogte" -#: src/libslic3r/PrintConfig.cpp:3057 +#: src/libslic3r/PrintConfig.cpp:3056 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " @@ -14322,43 +14396,51 @@ msgstr "" "eindstop bijvoorbeeld een waarde gebruikt die 0.3mm van het printbed is, kan " "dit ingesteld worden op -0.3mm." -#: src/libslic3r/PrintConfig.cpp:3066 +#: src/libslic3r/PrintConfig.cpp:3065 msgid "Perimeter generator" -msgstr "" +msgstr "Perimetergeneratie" -#: src/libslic3r/PrintConfig.cpp:3068 +#: src/libslic3r/PrintConfig.cpp:3067 msgid "" "Classic perimeter generator produces perimeters with constant extrusion " "width and for very thin areas is used gap-fill. Arachne engine produces " "perimeters with variable extrusion width. This setting also affects the " "Concentric infill." msgstr "" +"Klassieke perimetergeneratie produceert perimeters met constante " +"extrusiebreedte en gebruikt gatenvulling voor dunne stukken. Arachne " +"produceert perimeters met variabele extrusiebreedte. Deze instelling heeft " +"ook effect op concentrische vulling." + +#: src/libslic3r/PrintConfig.cpp:3074 +msgid "Classic" +msgstr "Klassiek" #: src/libslic3r/PrintConfig.cpp:3075 -msgid "Classic" -msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3076 msgid "Arachne" -msgstr "" +msgstr "Arachne" -#: src/libslic3r/PrintConfig.cpp:3081 +#: src/libslic3r/PrintConfig.cpp:3080 msgid "Perimeter transition length" -msgstr "" +msgstr "Transitielengte voor perimeters" -#: src/libslic3r/PrintConfig.cpp:3083 +#: src/libslic3r/PrintConfig.cpp:3082 msgid "" "When transitioning between different numbers of perimeters as the part " "becomes thinner, a certain amount of space is allotted to split or join the " "perimeter segments. If expressed as a percentage (for example 100%), it will " "be computed based on the nozzle diameter." msgstr "" +"Bij de overgang naar een verschillend aantal perimeters bij dunnere diktes " +"wordt een bepaalde ruimte gebruikt om te splitten of samenvoegen van " +"perimetersegmenten. Als dit wordt uitgedrukt als percentage (bijvoorbeeld " +"100%), wordt deze berekend op basis van de nozzlediameter." -#: src/libslic3r/PrintConfig.cpp:3092 +#: src/libslic3r/PrintConfig.cpp:3091 msgid "Perimeter transitioning filter margin" -msgstr "" +msgstr "Marge voor transitielengte voor perimeters" -#: src/libslic3r/PrintConfig.cpp:3094 +#: src/libslic3r/PrintConfig.cpp:3093 msgid "" "Prevent transitioning back and forth between one extra perimeter and one " "less. This margin extends the range of extrusion widths which follow to " @@ -14369,12 +14451,19 @@ msgid "" "as a percentage (for example 25%), it will be computed based on the nozzle " "diameter." msgstr "" +"Voorkom transities tussen één en meerdere perimeters. Deze marge breidt het " +"bereik uit van de extrusiebreedte die volgt op [minimale perimeterbreedte - " +"marge, 2x minimale perimeterbreedte + marge]. Verhogen van deze marge " +"reduceert het aantal transities, wat het aantal terugtrekkingen verlaagt. " +"Hoewel, een hogere variatie van de extrusiebreedte kan leiden tot onder- of " +"overextrusie problemen. Als dit wordt uitgedrukt als percentage " +"(bijvoorbeeld 25%) wordt dit berekend op basis van de nozzlediameter." -#: src/libslic3r/PrintConfig.cpp:3107 +#: src/libslic3r/PrintConfig.cpp:3106 msgid "Perimeter transitioning threshold angle" -msgstr "" +msgstr "Transitiehoek voor perimeters" -#: src/libslic3r/PrintConfig.cpp:3109 +#: src/libslic3r/PrintConfig.cpp:3108 msgid "" "When to create transitions between even and odd numbers of perimeters. A " "wedge shape with an angle greater than this setting will not have " @@ -14382,23 +14471,31 @@ msgid "" "remaining space. Reducing this setting reduces the number and length of " "these center perimeters, but may leave gaps or overextrude." msgstr "" +"When to create transitions between even and odd numbers of perimeters. A " +"wedge shape with an angle greater than this setting will not have " +"transitions and no perimeters will be printed in the center to fill the " +"remaining space. Reducing this setting reduces the number and length of " +"these center perimeters, but may leave gaps or overextrude." -#: src/libslic3r/PrintConfig.cpp:3120 +#: src/libslic3r/PrintConfig.cpp:3119 msgid "Perimeter distribution count" -msgstr "" +msgstr "Perimeterdistributieaantal" -#: src/libslic3r/PrintConfig.cpp:3122 +#: src/libslic3r/PrintConfig.cpp:3121 msgid "" "The number of perimeters, counted from the center, over which the variation " "needs to be spread. Lower values mean that the outer perimeters don't change " "in width." msgstr "" +"Het aantal perimeters, geteld vanaf het midden waarover de variatie gespreid " +"wordt. Lagere waarde betekenen dat de buitenste perimeter niet in breedte " +"verandert." -#: src/libslic3r/PrintConfig.cpp:3129 +#: src/libslic3r/PrintConfig.cpp:3128 msgid "Minimum feature size" -msgstr "" +msgstr "Minimale objectgrootte" -#: src/libslic3r/PrintConfig.cpp:3131 +#: src/libslic3r/PrintConfig.cpp:3130 msgid "" "Minimum thickness of thin features. Model features that are thinner than " "this value will not be printed, while features thicker than the Minimum " @@ -14406,12 +14503,17 @@ msgid "" "a percentage (for example 25%), it will be computed based on the nozzle " "diameter." msgstr "" +"Minimale dikte van dunne delen. Delen van het model die dunner zijn dan deze " +"waarde worden niet geprint, terwijl delen van het model dikker dan de " +"minimale dikte van dunnen delen worden verbreed tot de minimale " +"perimeterbreedte. Als dit is uitgedrukt als percentage (bijvoorbeeld 25%), " +"wordt dit berekend op basis van de nozzlediameter." -#: src/libslic3r/PrintConfig.cpp:3141 +#: src/libslic3r/PrintConfig.cpp:3140 msgid "Minimum perimeter width" -msgstr "" +msgstr "Minimale perimeterbreedte" -#: src/libslic3r/PrintConfig.cpp:3143 +#: src/libslic3r/PrintConfig.cpp:3142 msgid "" "Width of the perimeter that will replace thin features (according to the " "Minimum feature size) of the model. If the Minimum perimeter width is " @@ -14419,64 +14521,69 @@ msgid "" "thick as the feature itself. If expressed as a percentage (for example 85%), " "it will be computed based on the nozzle diameter." msgstr "" +"Perimeterbreedte die dunne delen vervangt (volgens de minimale dikte van " +"dunne delen) van het model. Als die minimale perimeterbreedte dunner is dan " +"de dikte van de dunne delen, wordt de perimeter net zo dik als het de dunne " +"delen. Als dit is uitgedrukt als percentage (bijvoorbeeld 85%), dan wordt " +"dit berekend op basis van de nozzlediameter." -#: src/libslic3r/PrintConfig.cpp:3211 +#: src/libslic3r/PrintConfig.cpp:3210 msgid "Display width" msgstr "Schermbreedte" -#: src/libslic3r/PrintConfig.cpp:3212 +#: src/libslic3r/PrintConfig.cpp:3211 msgid "Width of the display" msgstr "Breedte van het scherm" -#: src/libslic3r/PrintConfig.cpp:3217 +#: src/libslic3r/PrintConfig.cpp:3216 msgid "Display height" msgstr "Schermhoogte" -#: src/libslic3r/PrintConfig.cpp:3218 +#: src/libslic3r/PrintConfig.cpp:3217 msgid "Height of the display" msgstr "Hoogte van het scherm" -#: src/libslic3r/PrintConfig.cpp:3223 +#: src/libslic3r/PrintConfig.cpp:3222 msgid "Number of pixels in" msgstr "Aantal pixels" -#: src/libslic3r/PrintConfig.cpp:3225 +#: src/libslic3r/PrintConfig.cpp:3224 msgid "Number of pixels in X" msgstr "Aantal pixels in de breedte" -#: src/libslic3r/PrintConfig.cpp:3231 +#: src/libslic3r/PrintConfig.cpp:3230 msgid "Number of pixels in Y" msgstr "Aantal pixels in de hoogte" -#: src/libslic3r/PrintConfig.cpp:3236 +#: src/libslic3r/PrintConfig.cpp:3235 msgid "Display horizontal mirroring" msgstr "Scherm horizontaal spiegelen" -#: src/libslic3r/PrintConfig.cpp:3237 +#: src/libslic3r/PrintConfig.cpp:3236 msgid "Mirror horizontally" msgstr "Spiegel horizontaal" -#: src/libslic3r/PrintConfig.cpp:3238 +#: src/libslic3r/PrintConfig.cpp:3237 msgid "Enable horizontal mirroring of output images" msgstr "Horizontaal spiegelen" -#: src/libslic3r/PrintConfig.cpp:3243 +#: src/libslic3r/PrintConfig.cpp:3242 msgid "Display vertical mirroring" msgstr "Scherm verticaal spiegelen" -#: src/libslic3r/PrintConfig.cpp:3244 +#: src/libslic3r/PrintConfig.cpp:3243 msgid "Mirror vertically" msgstr "Verticaal spiegelen" -#: src/libslic3r/PrintConfig.cpp:3245 +#: src/libslic3r/PrintConfig.cpp:3244 msgid "Enable vertical mirroring of output images" msgstr "Verticaal spiegelen" -#: src/libslic3r/PrintConfig.cpp:3250 +#: src/libslic3r/PrintConfig.cpp:3249 msgid "Display orientation" msgstr "Schermoriëntatie" -#: src/libslic3r/PrintConfig.cpp:3251 +#: src/libslic3r/PrintConfig.cpp:3250 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " @@ -14486,55 +14593,55 @@ msgstr "" "Staande modus zal de breedte- en hoogteparameters omwisselen en de output " "wordt 90 graden gedraaid." -#: src/libslic3r/PrintConfig.cpp:3257 +#: src/libslic3r/PrintConfig.cpp:3256 msgid "Landscape" msgstr "Liggend" -#: src/libslic3r/PrintConfig.cpp:3258 +#: src/libslic3r/PrintConfig.cpp:3257 msgid "Portrait" msgstr "Staand" -#: src/libslic3r/PrintConfig.cpp:3263 src/libslic3r/PrintConfig.cpp:3898 +#: src/libslic3r/PrintConfig.cpp:3262 src/libslic3r/PrintConfig.cpp:3897 msgid "Fast" msgstr "Snel" -#: src/libslic3r/PrintConfig.cpp:3264 +#: src/libslic3r/PrintConfig.cpp:3263 msgid "Fast tilt" msgstr "Snelle draaiing" -#: src/libslic3r/PrintConfig.cpp:3265 +#: src/libslic3r/PrintConfig.cpp:3264 msgid "Time of the fast tilt" msgstr "Tijd van de snelle draaiing" -#: src/libslic3r/PrintConfig.cpp:3272 src/libslic3r/PrintConfig.cpp:3897 +#: src/libslic3r/PrintConfig.cpp:3271 src/libslic3r/PrintConfig.cpp:3896 msgid "Slow" msgstr "Langzaam" -#: src/libslic3r/PrintConfig.cpp:3273 +#: src/libslic3r/PrintConfig.cpp:3272 msgid "Slow tilt" msgstr "Langzaam draaien" -#: src/libslic3r/PrintConfig.cpp:3274 +#: src/libslic3r/PrintConfig.cpp:3273 msgid "Time of the slow tilt" msgstr "Tijd van de langzame draaiing" -#: src/libslic3r/PrintConfig.cpp:3281 src/libslic3r/PrintConfig.cpp:3899 +#: src/libslic3r/PrintConfig.cpp:3280 src/libslic3r/PrintConfig.cpp:3898 msgid "High viscosity" -msgstr "" +msgstr "Hoge viscositeit" + +#: src/libslic3r/PrintConfig.cpp:3281 +msgid "Tilt for high viscosity resin" +msgstr "Draaiing voor hoogvisceuze resin" #: src/libslic3r/PrintConfig.cpp:3282 -msgid "Tilt for high viscosity resin" -msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3283 msgid "Time of the super slow tilt" -msgstr "" +msgstr "Tijd van de zeer langzame draaiing" -#: src/libslic3r/PrintConfig.cpp:3290 +#: src/libslic3r/PrintConfig.cpp:3289 msgid "Area fill" msgstr "Vulgebied" -#: src/libslic3r/PrintConfig.cpp:3291 +#: src/libslic3r/PrintConfig.cpp:3290 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" @@ -14544,40 +14651,40 @@ msgstr "" "Als het printgebied buiten een specifieke waarde valt \n" "wordt een korte draaiing gebruikt, anders een snelle" -#: src/libslic3r/PrintConfig.cpp:3298 src/libslic3r/PrintConfig.cpp:3299 -#: src/libslic3r/PrintConfig.cpp:3300 +#: src/libslic3r/PrintConfig.cpp:3297 src/libslic3r/PrintConfig.cpp:3298 +#: src/libslic3r/PrintConfig.cpp:3299 msgid "Printer scaling correction" msgstr "Verschalingscorrectie voor printer" -#: src/libslic3r/PrintConfig.cpp:3306 src/libslic3r/PrintConfig.cpp:3308 +#: src/libslic3r/PrintConfig.cpp:3305 src/libslic3r/PrintConfig.cpp:3307 msgid "Printer scaling correction in X axis" msgstr "Verschalingscorrectie over de X-as" -#: src/libslic3r/PrintConfig.cpp:3307 +#: src/libslic3r/PrintConfig.cpp:3306 msgid "Printer scaling X axis correction" msgstr "Verschalingscorrectie in X-richting" -#: src/libslic3r/PrintConfig.cpp:3314 src/libslic3r/PrintConfig.cpp:3316 +#: src/libslic3r/PrintConfig.cpp:3313 src/libslic3r/PrintConfig.cpp:3315 msgid "Printer scaling correction in Y axis" msgstr "Verschalingscorrectie over de Y-as" -#: src/libslic3r/PrintConfig.cpp:3315 +#: src/libslic3r/PrintConfig.cpp:3314 msgid "Printer scaling Y axis correction" msgstr "Verschalingscorrectie in Y-riching" -#: src/libslic3r/PrintConfig.cpp:3322 src/libslic3r/PrintConfig.cpp:3324 +#: src/libslic3r/PrintConfig.cpp:3321 src/libslic3r/PrintConfig.cpp:3323 msgid "Printer scaling correction in Z axis" msgstr "Verschalingscorrectie over de Z-as" -#: src/libslic3r/PrintConfig.cpp:3323 +#: src/libslic3r/PrintConfig.cpp:3322 msgid "Printer scaling Z axis correction" msgstr "Verschalingscorrectie in Z-riching" -#: src/libslic3r/PrintConfig.cpp:3330 src/libslic3r/PrintConfig.cpp:3331 +#: src/libslic3r/PrintConfig.cpp:3329 src/libslic3r/PrintConfig.cpp:3330 msgid "Printer absolute correction" msgstr "Absolute correctie voor printer" -#: src/libslic3r/PrintConfig.cpp:3332 +#: src/libslic3r/PrintConfig.cpp:3331 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." @@ -14585,20 +14692,20 @@ msgstr "" "Zal de geslicede veelhoeken uitrekken of laten krimpen, afhankelijk van de " "correctiewaarde." -#: src/libslic3r/PrintConfig.cpp:3338 +#: src/libslic3r/PrintConfig.cpp:3337 msgid "Elephant foot minimum width" msgstr "Squish-compensatiebreedte" -#: src/libslic3r/PrintConfig.cpp:3340 +#: src/libslic3r/PrintConfig.cpp:3339 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "Minimale breedte van delen waarop squish-compensatie wordt toegepast." -#: src/libslic3r/PrintConfig.cpp:3347 src/libslic3r/PrintConfig.cpp:3348 +#: src/libslic3r/PrintConfig.cpp:3346 src/libslic3r/PrintConfig.cpp:3347 msgid "Printer gamma correction" msgstr "Gammacorrectie voor printer" -#: src/libslic3r/PrintConfig.cpp:3349 +#: src/libslic3r/PrintConfig.cpp:3348 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " @@ -14608,43 +14715,43 @@ msgstr "" "betekent een waarde die in het midden ligt. Dit gedrag elimineert anti-" "aliasing zonder dat gaten in de veelhoeken verloren gaan." -#: src/libslic3r/PrintConfig.cpp:3368 src/libslic3r/PrintConfig.cpp:3369 +#: src/libslic3r/PrintConfig.cpp:3367 src/libslic3r/PrintConfig.cpp:3368 msgid "SLA material type" msgstr "SLA-materiaaltype" -#: src/libslic3r/PrintConfig.cpp:3380 src/libslic3r/PrintConfig.cpp:3381 +#: src/libslic3r/PrintConfig.cpp:3379 src/libslic3r/PrintConfig.cpp:3380 msgid "Initial layer height" msgstr "Laagdikte eerste laag" -#: src/libslic3r/PrintConfig.cpp:3387 src/libslic3r/PrintConfig.cpp:3388 +#: src/libslic3r/PrintConfig.cpp:3386 src/libslic3r/PrintConfig.cpp:3387 msgid "Bottle volume" msgstr "Flesinhoud (volume)" -#: src/libslic3r/PrintConfig.cpp:3389 +#: src/libslic3r/PrintConfig.cpp:3388 msgid "ml" msgstr "ml" -#: src/libslic3r/PrintConfig.cpp:3394 src/libslic3r/PrintConfig.cpp:3395 +#: src/libslic3r/PrintConfig.cpp:3393 src/libslic3r/PrintConfig.cpp:3394 msgid "Bottle weight" msgstr "Flesinhoud (gewicht)" -#: src/libslic3r/PrintConfig.cpp:3396 +#: src/libslic3r/PrintConfig.cpp:3395 msgid "kg" msgstr "kg" -#: src/libslic3r/PrintConfig.cpp:3403 +#: src/libslic3r/PrintConfig.cpp:3402 msgid "g/ml" msgstr "g/ml" -#: src/libslic3r/PrintConfig.cpp:3410 +#: src/libslic3r/PrintConfig.cpp:3409 msgid "money/bottle" msgstr "€/fles" -#: src/libslic3r/PrintConfig.cpp:3415 +#: src/libslic3r/PrintConfig.cpp:3414 msgid "Faded layers" msgstr "Transitielagen" -#: src/libslic3r/PrintConfig.cpp:3416 +#: src/libslic3r/PrintConfig.cpp:3415 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" @@ -14652,103 +14759,103 @@ msgstr "" "Aantal lagen waarin de initiële belichtingstijd stapsgewijs wordt " "teruggebracht naar de standaard belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3423 src/libslic3r/PrintConfig.cpp:3424 +#: src/libslic3r/PrintConfig.cpp:3422 src/libslic3r/PrintConfig.cpp:3423 msgid "Minimum exposure time" msgstr "Minimale belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3431 src/libslic3r/PrintConfig.cpp:3432 +#: src/libslic3r/PrintConfig.cpp:3430 src/libslic3r/PrintConfig.cpp:3431 msgid "Maximum exposure time" msgstr "Maximale belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3439 src/libslic3r/PrintConfig.cpp:3440 +#: src/libslic3r/PrintConfig.cpp:3438 src/libslic3r/PrintConfig.cpp:3439 msgid "Exposure time" msgstr "Belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3446 src/libslic3r/PrintConfig.cpp:3447 +#: src/libslic3r/PrintConfig.cpp:3445 src/libslic3r/PrintConfig.cpp:3446 msgid "Minimum initial exposure time" msgstr "Minimale initiële belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3454 src/libslic3r/PrintConfig.cpp:3455 +#: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3454 msgid "Maximum initial exposure time" msgstr "Maximale initiële belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3462 src/libslic3r/PrintConfig.cpp:3463 +#: src/libslic3r/PrintConfig.cpp:3461 src/libslic3r/PrintConfig.cpp:3462 msgid "Initial exposure time" msgstr "Initiële belichtingstijd" -#: src/libslic3r/PrintConfig.cpp:3469 src/libslic3r/PrintConfig.cpp:3470 +#: src/libslic3r/PrintConfig.cpp:3468 src/libslic3r/PrintConfig.cpp:3469 msgid "Correction for expansion" msgstr "Vergrotingscorrectie" -#: src/libslic3r/PrintConfig.cpp:3476 src/libslic3r/PrintConfig.cpp:3477 +#: src/libslic3r/PrintConfig.cpp:3475 src/libslic3r/PrintConfig.cpp:3476 msgid "Correction for expansion in X axis" msgstr "Uitzettingscorrectie over de X-as" -#: src/libslic3r/PrintConfig.cpp:3483 src/libslic3r/PrintConfig.cpp:3484 +#: src/libslic3r/PrintConfig.cpp:3482 src/libslic3r/PrintConfig.cpp:3483 msgid "Correction for expansion in Y axis" msgstr "Uitzettingscorrectie over de Y-as" -#: src/libslic3r/PrintConfig.cpp:3490 src/libslic3r/PrintConfig.cpp:3491 +#: src/libslic3r/PrintConfig.cpp:3489 src/libslic3r/PrintConfig.cpp:3490 msgid "Correction for expansion in Z axis" msgstr "Uitzettingscorrectie over de Z-as" -#: src/libslic3r/PrintConfig.cpp:3497 +#: src/libslic3r/PrintConfig.cpp:3496 msgid "SLA print material notes" msgstr "SLA-printmateriaal opmerkingen" -#: src/libslic3r/PrintConfig.cpp:3498 +#: src/libslic3r/PrintConfig.cpp:3497 msgid "You can put your notes regarding the SLA print material here." msgstr "U kunt hier opmerkingen plaatsen wat betreft het SLA-materiaal." -#: src/libslic3r/PrintConfig.cpp:3510 src/libslic3r/PrintConfig.cpp:3521 +#: src/libslic3r/PrintConfig.cpp:3509 src/libslic3r/PrintConfig.cpp:3520 msgid "Default SLA material profile" msgstr "Standaard SLA-materiaalprofiel" -#: src/libslic3r/PrintConfig.cpp:3532 +#: src/libslic3r/PrintConfig.cpp:3531 msgid "Generate supports" msgstr "Genereer support" -#: src/libslic3r/PrintConfig.cpp:3534 +#: src/libslic3r/PrintConfig.cpp:3533 msgid "Generate supports for the models" msgstr "Genereer support voor de modellen" -#: src/libslic3r/PrintConfig.cpp:3539 +#: src/libslic3r/PrintConfig.cpp:3538 msgid "Pinhead front diameter" msgstr "Diameter voorzijde pinkop" -#: src/libslic3r/PrintConfig.cpp:3541 +#: src/libslic3r/PrintConfig.cpp:3540 msgid "Diameter of the pointing side of the head" msgstr "Diameter van de puntige zijde van de kop" -#: src/libslic3r/PrintConfig.cpp:3548 +#: src/libslic3r/PrintConfig.cpp:3547 msgid "Head penetration" msgstr "Koppenetratie" -#: src/libslic3r/PrintConfig.cpp:3550 +#: src/libslic3r/PrintConfig.cpp:3549 msgid "How much the pinhead has to penetrate the model surface" msgstr "Hoe ver de supportkop in het model moet steken" -#: src/libslic3r/PrintConfig.cpp:3557 +#: src/libslic3r/PrintConfig.cpp:3556 msgid "Pinhead width" msgstr "Pinkopbreedte" -#: src/libslic3r/PrintConfig.cpp:3559 +#: src/libslic3r/PrintConfig.cpp:3558 msgid "Width from the back sphere center to the front sphere center" msgstr "Centerafstand van de achterste tot de voorste bol" -#: src/libslic3r/PrintConfig.cpp:3567 +#: src/libslic3r/PrintConfig.cpp:3566 msgid "Pillar diameter" msgstr "Pijlerdiameter" -#: src/libslic3r/PrintConfig.cpp:3569 +#: src/libslic3r/PrintConfig.cpp:3568 msgid "Diameter in mm of the support pillars" msgstr "Diameter van de supportpijlers (in mm)" -#: src/libslic3r/PrintConfig.cpp:3577 +#: src/libslic3r/PrintConfig.cpp:3576 msgid "Small pillar diameter percent" msgstr "Percentage van smalle pijlerdiameter" -#: src/libslic3r/PrintConfig.cpp:3579 +#: src/libslic3r/PrintConfig.cpp:3578 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." @@ -14756,11 +14863,11 @@ msgstr "" "Het percentage van smallere pijlers vergeleken met normale pijlerdiameters " "die worden gebruikt in moeilijk te bereiken plekken." -#: src/libslic3r/PrintConfig.cpp:3588 +#: src/libslic3r/PrintConfig.cpp:3587 msgid "Max bridges on a pillar" msgstr "Maximaal aantal bruggen op een pijler" -#: src/libslic3r/PrintConfig.cpp:3590 +#: src/libslic3r/PrintConfig.cpp:3589 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." @@ -14768,11 +14875,11 @@ msgstr "" "Maximaal aantal bruggen dat op een pijler geplaatst kan worden. Bruggen " "houden supportpuntkop bij elkaar en verbinden pijlers as smalle takken." -#: src/libslic3r/PrintConfig.cpp:3598 +#: src/libslic3r/PrintConfig.cpp:3597 msgid "Pillar connection mode" msgstr "Pijlerverbindingsmodus" -#: src/libslic3r/PrintConfig.cpp:3599 +#: src/libslic3r/PrintConfig.cpp:3598 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " @@ -14782,23 +14889,23 @@ msgstr "" "kruisend (dubbele zigzag) of dynamisch zijn. Dynamisch houdt in dat wordt " "geschakeld tussen de eerste twee, afhankelijk van de pijlerafstand." -#: src/libslic3r/PrintConfig.cpp:3607 +#: src/libslic3r/PrintConfig.cpp:3606 msgid "Zig-Zag" msgstr "Zigzag" -#: src/libslic3r/PrintConfig.cpp:3608 +#: src/libslic3r/PrintConfig.cpp:3607 msgid "Cross" msgstr "Kruisend" -#: src/libslic3r/PrintConfig.cpp:3609 +#: src/libslic3r/PrintConfig.cpp:3608 msgid "Dynamic" msgstr "Dynamisch" -#: src/libslic3r/PrintConfig.cpp:3621 +#: src/libslic3r/PrintConfig.cpp:3620 msgid "Pillar widening factor" msgstr "Pijlervergrotingsfactor" -#: src/libslic3r/PrintConfig.cpp:3623 +#: src/libslic3r/PrintConfig.cpp:3622 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." @@ -14806,27 +14913,27 @@ msgstr "" "Bruggen of pijlers samenvoegen met andere pijlers kan de radius vergroten. 0 " "betekent geen vergroting, 1 betekent volle vergroting." -#: src/libslic3r/PrintConfig.cpp:3632 +#: src/libslic3r/PrintConfig.cpp:3631 msgid "Support base diameter" msgstr "Supportbasis - diameter" -#: src/libslic3r/PrintConfig.cpp:3634 +#: src/libslic3r/PrintConfig.cpp:3633 msgid "Diameter in mm of the pillar base" msgstr "Diameter van de pijlerbasis (in mm)" -#: src/libslic3r/PrintConfig.cpp:3642 +#: src/libslic3r/PrintConfig.cpp:3641 msgid "Support base height" msgstr "Supportbasis - hoogte" -#: src/libslic3r/PrintConfig.cpp:3644 +#: src/libslic3r/PrintConfig.cpp:3643 msgid "The height of the pillar base cone" msgstr "Hoogte van de pijlerbasiskegel" -#: src/libslic3r/PrintConfig.cpp:3651 +#: src/libslic3r/PrintConfig.cpp:3650 msgid "Support base safety distance" msgstr "Supportbasis - veilige afstand" -#: src/libslic3r/PrintConfig.cpp:3654 +#: src/libslic3r/PrintConfig.cpp:3653 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " @@ -14836,27 +14943,27 @@ msgstr "" "modus zonder verhoging waar een gat volgens deze parameter wordt ingevoegd " "tussen het model en de basisplaat." -#: src/libslic3r/PrintConfig.cpp:3664 +#: src/libslic3r/PrintConfig.cpp:3663 msgid "Critical angle" msgstr "Kritische hoek" -#: src/libslic3r/PrintConfig.cpp:3666 +#: src/libslic3r/PrintConfig.cpp:3665 msgid "The default angle for connecting support sticks and junctions." msgstr "De standaardhoek voor de verbinding van supporttakken en kruisingen." -#: src/libslic3r/PrintConfig.cpp:3674 +#: src/libslic3r/PrintConfig.cpp:3673 msgid "Max bridge length" msgstr "Maximale bruglengte" -#: src/libslic3r/PrintConfig.cpp:3676 +#: src/libslic3r/PrintConfig.cpp:3675 msgid "The max length of a bridge" msgstr "Maximale bruglengte" -#: src/libslic3r/PrintConfig.cpp:3683 +#: src/libslic3r/PrintConfig.cpp:3682 msgid "Max pillar linking distance" msgstr "Maximale pijler-verbindafstand" -#: src/libslic3r/PrintConfig.cpp:3685 +#: src/libslic3r/PrintConfig.cpp:3684 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." @@ -14864,7 +14971,7 @@ msgstr "" "Maximale verbindingsafstand van twee pijlers. Een waarde van 0 schakelt aan " "elkaar verbonden pijlers uit." -#: src/libslic3r/PrintConfig.cpp:3695 +#: src/libslic3r/PrintConfig.cpp:3694 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." @@ -14872,39 +14979,39 @@ msgstr "" "Hoe veel het support omhoog moet bewegen op het ondersteunde object. Als " "'Basisplaat rondom object' is ingeschakeld wordt deze waarde genegeerd." -#: src/libslic3r/PrintConfig.cpp:3706 +#: src/libslic3r/PrintConfig.cpp:3705 msgid "This is a relative measure of support points density." msgstr "Relatieve waarde van de dichtheid van supportpunten." -#: src/libslic3r/PrintConfig.cpp:3712 +#: src/libslic3r/PrintConfig.cpp:3711 msgid "Minimal distance of the support points" msgstr "Minimale supportpuntafstand" -#: src/libslic3r/PrintConfig.cpp:3714 +#: src/libslic3r/PrintConfig.cpp:3713 msgid "No support points will be placed closer than this threshold." msgstr "Minimale afstand tussen supportpunten." -#: src/libslic3r/PrintConfig.cpp:3720 +#: src/libslic3r/PrintConfig.cpp:3719 msgid "Use pad" msgstr "Gebruik basisplaat" -#: src/libslic3r/PrintConfig.cpp:3722 +#: src/libslic3r/PrintConfig.cpp:3721 msgid "Add a pad underneath the supported model" msgstr "Voeg een basisplaat toe onder het model met support" -#: src/libslic3r/PrintConfig.cpp:3727 +#: src/libslic3r/PrintConfig.cpp:3726 msgid "Pad wall thickness" msgstr "Basisplaat - wanddikte" -#: src/libslic3r/PrintConfig.cpp:3729 +#: src/libslic3r/PrintConfig.cpp:3728 msgid "The thickness of the pad and its optional cavity walls." msgstr "Dikte van de basisplaat en optionele wanden." -#: src/libslic3r/PrintConfig.cpp:3737 +#: src/libslic3r/PrintConfig.cpp:3736 msgid "Pad wall height" msgstr "Basisplaat - wandhoogte" -#: src/libslic3r/PrintConfig.cpp:3738 +#: src/libslic3r/PrintConfig.cpp:3737 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " @@ -14916,19 +15023,19 @@ msgstr "" "sommige resins een sterk zuigeffect in de holte produceren, wat het afpellen " "van de print van het folie lastig kan maken." -#: src/libslic3r/PrintConfig.cpp:3751 +#: src/libslic3r/PrintConfig.cpp:3750 msgid "Pad brim size" msgstr "Basisplaat - expansie" -#: src/libslic3r/PrintConfig.cpp:3752 +#: src/libslic3r/PrintConfig.cpp:3751 msgid "How far should the pad extend around the contained geometry" msgstr "Hoe ver de basisplaat moet uitsteken buiten de geometrie" -#: src/libslic3r/PrintConfig.cpp:3762 +#: src/libslic3r/PrintConfig.cpp:3761 msgid "Max merge distance" msgstr "Maximale combineerafstand" -#: src/libslic3r/PrintConfig.cpp:3764 +#: src/libslic3r/PrintConfig.cpp:3763 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " @@ -14938,11 +15045,11 @@ msgstr "" "van één grote. Deze parameter bepaalt hoe ver de tussenafstand van de " "kleinere basisplaten mogen zijn." -#: src/libslic3r/PrintConfig.cpp:3784 +#: src/libslic3r/PrintConfig.cpp:3783 msgid "Pad wall slope" msgstr "Basisplaat - zijhoek" -#: src/libslic3r/PrintConfig.cpp:3786 +#: src/libslic3r/PrintConfig.cpp:3785 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." @@ -14950,23 +15057,23 @@ msgstr "" "Hoek van de basisplaatzijde ten opzichte van het bed. 90 graden betekent een " "rechte zijkant." -#: src/libslic3r/PrintConfig.cpp:3797 +#: src/libslic3r/PrintConfig.cpp:3796 msgid "Create pad around object and ignore the support elevation" msgstr "Genereer basisplaat rondom object en schakel objectverhoging uit" -#: src/libslic3r/PrintConfig.cpp:3802 +#: src/libslic3r/PrintConfig.cpp:3801 msgid "Pad around object everywhere" msgstr "Overal basisplaat rondom object" -#: src/libslic3r/PrintConfig.cpp:3804 +#: src/libslic3r/PrintConfig.cpp:3803 msgid "Force pad around object everywhere" msgstr "Forceer basisplaat overal rondom het object" -#: src/libslic3r/PrintConfig.cpp:3809 +#: src/libslic3r/PrintConfig.cpp:3808 msgid "Pad object gap" msgstr "Basisplaat - gat" -#: src/libslic3r/PrintConfig.cpp:3811 +#: src/libslic3r/PrintConfig.cpp:3810 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." @@ -14974,11 +15081,11 @@ msgstr "" "Het gat tussen de onderkant van het object en de gegenereerde basisplaat in " "de modus zonder verhoging." -#: src/libslic3r/PrintConfig.cpp:3820 +#: src/libslic3r/PrintConfig.cpp:3819 msgid "Pad object connector stride" msgstr "Basisplaat - verbindingstakafstand" -#: src/libslic3r/PrintConfig.cpp:3822 +#: src/libslic3r/PrintConfig.cpp:3821 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." @@ -14986,46 +15093,46 @@ msgstr "" "Afstand tussen twee verbindingstakken die het object verbinden aan de " "basisplaat." -#: src/libslic3r/PrintConfig.cpp:3829 +#: src/libslic3r/PrintConfig.cpp:3828 msgid "Pad object connector width" msgstr "Basisplaat - verbindingstakbreedte" -#: src/libslic3r/PrintConfig.cpp:3831 +#: src/libslic3r/PrintConfig.cpp:3830 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" "Breedte van de verbindingstakken die het object en de basisplaat met elkaar " "verbinden." -#: src/libslic3r/PrintConfig.cpp:3838 +#: src/libslic3r/PrintConfig.cpp:3837 msgid "Pad object connector penetration" msgstr "Basisplaat - Verbindingstakinsteek" -#: src/libslic3r/PrintConfig.cpp:3841 +#: src/libslic3r/PrintConfig.cpp:3840 msgid "How much should the tiny connectors penetrate into the model body." msgstr "Hoe ver de verbindingstakken in het model steken." -#: src/libslic3r/PrintConfig.cpp:3848 +#: src/libslic3r/PrintConfig.cpp:3847 msgid "Enable hollowing" msgstr "Uithollen toestaan" -#: src/libslic3r/PrintConfig.cpp:3850 +#: src/libslic3r/PrintConfig.cpp:3849 msgid "Hollow out a model to have an empty interior" msgstr "Hol een model uit voor een leeg binnenste" -#: src/libslic3r/PrintConfig.cpp:3855 +#: src/libslic3r/PrintConfig.cpp:3854 msgid "Wall thickness" msgstr "Wanddikte" -#: src/libslic3r/PrintConfig.cpp:3857 +#: src/libslic3r/PrintConfig.cpp:3856 msgid "Minimum wall thickness of a hollowed model." msgstr "Minimale wanddikte van een uitgehold model." -#: src/libslic3r/PrintConfig.cpp:3865 +#: src/libslic3r/PrintConfig.cpp:3864 msgid "Accuracy" msgstr "Nauwkeurigheid" -#: src/libslic3r/PrintConfig.cpp:3867 +#: src/libslic3r/PrintConfig.cpp:3866 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." @@ -15033,7 +15140,7 @@ msgstr "" "Prestatie tegenover nauwkeurigheid van berekenen. Lagere waarde kunnen " "ongewenste artefacten produceren." -#: src/libslic3r/PrintConfig.cpp:3877 +#: src/libslic3r/PrintConfig.cpp:3876 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " @@ -15047,11 +15154,11 @@ msgstr "" "binnenste ronder. Bij een waarde van 0 is het binnenste vrijwel gelijk aan " "de buitenzijde." -#: src/libslic3r/PrintConfig.cpp:3889 +#: src/libslic3r/PrintConfig.cpp:3888 msgid "Print speed" msgstr "Printsnelheid" -#: src/libslic3r/PrintConfig.cpp:3891 +#: src/libslic3r/PrintConfig.cpp:3890 msgid "" "A slower printing profile might be necessary when using materials with " "higher viscosity or with some hollowed parts. It slows down the tilt " @@ -15061,63 +15168,63 @@ msgstr "" "vloeibaarheid of met holle delen. Het vertraagt de kantelbeweging en voegt " "een vertraging toe na de belichting." -#: src/libslic3r/PrintConfig.cpp:4359 +#: src/libslic3r/PrintConfig.cpp:4358 msgid "Export OBJ" msgstr "Exporteer OBJ" -#: src/libslic3r/PrintConfig.cpp:4360 +#: src/libslic3r/PrintConfig.cpp:4359 msgid "Export the model(s) as OBJ." -msgstr "Exporteer de modellen als OBJ-bestand." +msgstr "Exporteer de modellen als .OBJ-bestand." -#: src/libslic3r/PrintConfig.cpp:4371 +#: src/libslic3r/PrintConfig.cpp:4370 msgid "Export SLA" msgstr "Exporteer SLA" -#: src/libslic3r/PrintConfig.cpp:4372 +#: src/libslic3r/PrintConfig.cpp:4371 msgid "Slice the model and export SLA printing layers as PNG." -msgstr "Slice het model en exporteer SLA-printlagen als PNG-bestanden." +msgstr "Slice het model en exporteer SLA-printlagen als .PNG-bestanden." -#: src/libslic3r/PrintConfig.cpp:4377 +#: src/libslic3r/PrintConfig.cpp:4376 msgid "Export 3MF" msgstr "Exporteer 3MF" -#: src/libslic3r/PrintConfig.cpp:4378 +#: src/libslic3r/PrintConfig.cpp:4377 msgid "Export the model(s) as 3MF." -msgstr "Exporteer de modellen als 3MF-bestanden." +msgstr "Exporteer de modellen als .3MF-bestanden." -#: src/libslic3r/PrintConfig.cpp:4382 +#: src/libslic3r/PrintConfig.cpp:4381 msgid "Export AMF" msgstr "Exporteer AMF" -#: src/libslic3r/PrintConfig.cpp:4383 +#: src/libslic3r/PrintConfig.cpp:4382 msgid "Export the model(s) as AMF." -msgstr "Exporteer de modellen als AMF-bestanden." +msgstr "Exporteer de modellen als .AMF-bestanden." -#: src/libslic3r/PrintConfig.cpp:4387 +#: src/libslic3r/PrintConfig.cpp:4386 msgid "Export STL" msgstr "Exporteer STL" -#: src/libslic3r/PrintConfig.cpp:4388 +#: src/libslic3r/PrintConfig.cpp:4387 msgid "Export the model(s) as STL." -msgstr "Exporteer de modellen als STL-bestand." +msgstr "Exporteer de modellen als .STL-bestand." -#: src/libslic3r/PrintConfig.cpp:4393 +#: src/libslic3r/PrintConfig.cpp:4392 msgid "Slice the model and export toolpaths as G-code." -msgstr "Slice het model en exporteer de paden als G-code-bestand." +msgstr "Slice het model en exporteer de paden als .gcode-bestand." -#: src/libslic3r/PrintConfig.cpp:4398 +#: src/libslic3r/PrintConfig.cpp:4397 msgid "G-code viewer" msgstr "G-code weergave" -#: src/libslic3r/PrintConfig.cpp:4399 +#: src/libslic3r/PrintConfig.cpp:4398 msgid "Visualize an already sliced and saved G-code" msgstr "Visualiseer een reeds opgeslagen G-code" -#: src/libslic3r/PrintConfig.cpp:4404 +#: src/libslic3r/PrintConfig.cpp:4403 msgid "Slice" msgstr "Slice" -#: src/libslic3r/PrintConfig.cpp:4405 +#: src/libslic3r/PrintConfig.cpp:4404 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." @@ -15125,71 +15232,71 @@ msgstr "" "Slice het model als FFF of SLA, gebaseerd op de 'printer_technology'-" "configuratiewaarde." -#: src/libslic3r/PrintConfig.cpp:4410 +#: src/libslic3r/PrintConfig.cpp:4409 msgid "Help" msgstr "Help" -#: src/libslic3r/PrintConfig.cpp:4411 +#: src/libslic3r/PrintConfig.cpp:4410 msgid "Show this help." msgstr "Toon deze hulp zien." -#: src/libslic3r/PrintConfig.cpp:4416 +#: src/libslic3r/PrintConfig.cpp:4415 msgid "Help (FFF options)" msgstr "Help (FFF-opties)" -#: src/libslic3r/PrintConfig.cpp:4417 +#: src/libslic3r/PrintConfig.cpp:4416 msgid "Show the full list of print/G-code configuration options." msgstr "Toon de volledige lijst van print- of G-code-configuratie-opties." -#: src/libslic3r/PrintConfig.cpp:4421 +#: src/libslic3r/PrintConfig.cpp:4420 msgid "Help (SLA options)" msgstr "Help (SLA opties)" -#: src/libslic3r/PrintConfig.cpp:4422 +#: src/libslic3r/PrintConfig.cpp:4421 msgid "Show the full list of SLA print configuration options." msgstr "Toon de volledige lijst van SLA-printconfiguratie-opties." -#: src/libslic3r/PrintConfig.cpp:4426 +#: src/libslic3r/PrintConfig.cpp:4425 msgid "Output Model Info" msgstr "Output model-info" -#: src/libslic3r/PrintConfig.cpp:4427 +#: src/libslic3r/PrintConfig.cpp:4426 msgid "Write information about the model to the console." msgstr "Schrijf informatie over het model naar de console." -#: src/libslic3r/PrintConfig.cpp:4431 +#: src/libslic3r/PrintConfig.cpp:4430 msgid "Save config file" msgstr "Sla configuratiebestand op" -#: src/libslic3r/PrintConfig.cpp:4432 +#: src/libslic3r/PrintConfig.cpp:4431 msgid "Save configuration to the specified file." msgstr "Sla configuratie op in aangegeven bestand." -#: src/libslic3r/PrintConfig.cpp:4442 +#: src/libslic3r/PrintConfig.cpp:4441 msgid "Align XY" msgstr "XY uitlijnen" -#: src/libslic3r/PrintConfig.cpp:4443 +#: src/libslic3r/PrintConfig.cpp:4442 msgid "Align the model to the given point." msgstr "Lijn de modellen uit op het gegeven punt." -#: src/libslic3r/PrintConfig.cpp:4448 +#: src/libslic3r/PrintConfig.cpp:4447 msgid "Cut model at the given Z." msgstr "Snijdt model op de ingestelde hoogte." -#: src/libslic3r/PrintConfig.cpp:4469 +#: src/libslic3r/PrintConfig.cpp:4468 msgid "Center" msgstr "Centreer" -#: src/libslic3r/PrintConfig.cpp:4470 +#: src/libslic3r/PrintConfig.cpp:4469 msgid "Center the print around the given center." msgstr "Centreer de print op het middelpunt." -#: src/libslic3r/PrintConfig.cpp:4474 +#: src/libslic3r/PrintConfig.cpp:4473 msgid "Don't arrange" msgstr "Niet schikken" -#: src/libslic3r/PrintConfig.cpp:4475 +#: src/libslic3r/PrintConfig.cpp:4474 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." @@ -15197,11 +15304,11 @@ msgstr "" "Herschik de modellen niet voor het samenvoegen en behoudt de originele X- en " "Y-coördinaten." -#: src/libslic3r/PrintConfig.cpp:4478 +#: src/libslic3r/PrintConfig.cpp:4477 msgid "Ensure on bed" msgstr "Plaats op bed" -#: src/libslic3r/PrintConfig.cpp:4479 +#: src/libslic3r/PrintConfig.cpp:4478 msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." @@ -15209,23 +15316,23 @@ msgstr "" "Til het object boven het bed als deze er gedeeltelijk onder valt. Staat " "standaard aan. Gebruik \"no_ensure_on_bed\" om uit te zetten." -#: src/libslic3r/PrintConfig.cpp:4483 +#: src/libslic3r/PrintConfig.cpp:4482 msgid "Duplicate" msgstr "Dupliceer" -#: src/libslic3r/PrintConfig.cpp:4484 +#: src/libslic3r/PrintConfig.cpp:4483 msgid "Multiply copies by this factor." msgstr "Meerdere kopieën van dit aantal." -#: src/libslic3r/PrintConfig.cpp:4488 +#: src/libslic3r/PrintConfig.cpp:4487 msgid "Duplicate by grid" msgstr "Dupliceer in raster" -#: src/libslic3r/PrintConfig.cpp:4489 +#: src/libslic3r/PrintConfig.cpp:4488 msgid "Multiply copies by creating a grid." msgstr "Meerdere kopieën in raster." -#: src/libslic3r/PrintConfig.cpp:4493 +#: src/libslic3r/PrintConfig.cpp:4492 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." @@ -15233,7 +15340,7 @@ msgstr "" "Schik de toegevoegde modellen en combineer ze tot één model om eenmalig " "acties uit te voeren." -#: src/libslic3r/PrintConfig.cpp:4498 +#: src/libslic3r/PrintConfig.cpp:4497 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." @@ -15241,31 +15348,31 @@ msgstr "" "Probeer alle niet-gesloten meshes te repareren (deze optie is impliciet " "toegevoegd om, wanneer dat nodig is, onmogelijke modellen toch te slicen)." -#: src/libslic3r/PrintConfig.cpp:4502 +#: src/libslic3r/PrintConfig.cpp:4501 msgid "Rotation angle around the Z axis in degrees." msgstr "Rotatiehoek rond de Z-as in graden." -#: src/libslic3r/PrintConfig.cpp:4506 +#: src/libslic3r/PrintConfig.cpp:4505 msgid "Rotate around X" msgstr "Draai over de X-as" -#: src/libslic3r/PrintConfig.cpp:4507 +#: src/libslic3r/PrintConfig.cpp:4506 msgid "Rotation angle around the X axis in degrees." msgstr "Rotatiehoek rond de X-as in graden." -#: src/libslic3r/PrintConfig.cpp:4511 +#: src/libslic3r/PrintConfig.cpp:4510 msgid "Rotate around Y" msgstr "Draai over de Y-as" -#: src/libslic3r/PrintConfig.cpp:4512 +#: src/libslic3r/PrintConfig.cpp:4511 msgid "Rotation angle around the Y axis in degrees." msgstr "Rotatiehoek rond de Y-as in graden." -#: src/libslic3r/PrintConfig.cpp:4517 +#: src/libslic3r/PrintConfig.cpp:4516 msgid "Scaling factor or percentage." msgstr "Schalingsfactor of percentage." -#: src/libslic3r/PrintConfig.cpp:4522 +#: src/libslic3r/PrintConfig.cpp:4521 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." @@ -15273,23 +15380,23 @@ msgstr "" "Detecteer niet-verbonden onderdelen in het model en deel ze op in " "verschillende objecten." -#: src/libslic3r/PrintConfig.cpp:4525 +#: src/libslic3r/PrintConfig.cpp:4524 msgid "Scale to Fit" msgstr "Verschaal naar passing" -#: src/libslic3r/PrintConfig.cpp:4526 +#: src/libslic3r/PrintConfig.cpp:4525 msgid "Scale to fit the given volume." msgstr "Verschaal naar passing in het gegeven volume." -#: src/libslic3r/PrintConfig.cpp:4535 +#: src/libslic3r/PrintConfig.cpp:4534 msgid "Ignore non-existent config files" msgstr "Negeer niet-bestaande configuratiebestanden" -#: src/libslic3r/PrintConfig.cpp:4536 +#: src/libslic3r/PrintConfig.cpp:4535 msgid "Do not fail if a file supplied to --load does not exist." msgstr "Geef geen fout als een bestand om te laden niet bestaat." -#: src/libslic3r/PrintConfig.cpp:4539 +#: src/libslic3r/PrintConfig.cpp:4538 msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." @@ -15297,7 +15404,7 @@ msgstr "" "Doorgang-compatibiliteitsregel bij het laden van configuraties van " "configuratie- en projectbestanden (3MF, AMF)." -#: src/libslic3r/PrintConfig.cpp:4540 +#: src/libslic3r/PrintConfig.cpp:4539 msgid "" "This version of PrusaSlicer may not understand configurations produced by " "the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend " @@ -15310,11 +15417,11 @@ msgstr "" "onbekende waarde zonder melding of woordelijk te vervangen door een " "standaardwaarde." -#: src/libslic3r/PrintConfig.cpp:4547 +#: src/libslic3r/PrintConfig.cpp:4546 msgid "Bail out on unknown configuration values" msgstr "Sla onbekende configuratiewaarden over" -#: src/libslic3r/PrintConfig.cpp:4548 +#: src/libslic3r/PrintConfig.cpp:4547 msgid "" "Enable reading unknown configuration values by verbosely substituting them " "with defaults." @@ -15322,7 +15429,7 @@ msgstr "" "Sta to om onbekende configuratiewaarden te lezen door woordelijk te " "substitueren met standaardwaarden." -#: src/libslic3r/PrintConfig.cpp:4549 +#: src/libslic3r/PrintConfig.cpp:4548 msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." @@ -15330,11 +15437,11 @@ msgstr "" "Sta to om onbekende configuratiewaarden te lezen door zonder melding te " "substitueren met standaardwaarden." -#: src/libslic3r/PrintConfig.cpp:4553 +#: src/libslic3r/PrintConfig.cpp:4552 msgid "Load config file" msgstr "Laad configuratiebestand" -#: src/libslic3r/PrintConfig.cpp:4554 +#: src/libslic3r/PrintConfig.cpp:4553 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." @@ -15342,11 +15449,11 @@ msgstr "" "Laad configuratie uit een specifiek bestand. Dit kan meerdere keren gebruikt " "worden om instellingen uit meerdere bestanden te laden." -#: src/libslic3r/PrintConfig.cpp:4557 +#: src/libslic3r/PrintConfig.cpp:4556 msgid "Output File" msgstr "Outputbestand" -#: src/libslic3r/PrintConfig.cpp:4558 +#: src/libslic3r/PrintConfig.cpp:4557 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." @@ -15354,11 +15461,11 @@ msgstr "" "Het bestand waaroverheen wordt geschreven (als dit niet aangegeven is, wort " "dit gebaseerd op het inputbestand)." -#: src/libslic3r/PrintConfig.cpp:4562 +#: src/libslic3r/PrintConfig.cpp:4561 msgid "Single instance mode" msgstr "Enkele instantiemodus" -#: src/libslic3r/PrintConfig.cpp:4563 +#: src/libslic3r/PrintConfig.cpp:4562 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " @@ -15369,11 +15476,11 @@ msgstr "" "gestuurd. Dit overschrijft de \"enkele instantie\"-configuratiewaarde van de " "programmavoorkeuren." -#: src/libslic3r/PrintConfig.cpp:4574 +#: src/libslic3r/PrintConfig.cpp:4573 msgid "Data directory" msgstr "Bestandslocatie voor de data" -#: src/libslic3r/PrintConfig.cpp:4575 +#: src/libslic3r/PrintConfig.cpp:4574 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " @@ -15383,11 +15490,11 @@ msgstr "" "verschillende profielen of het opnemen van configuraties van een " "netwerkopslag." -#: src/libslic3r/PrintConfig.cpp:4578 +#: src/libslic3r/PrintConfig.cpp:4577 msgid "Logging level" msgstr "Logboekniveau" -#: src/libslic3r/PrintConfig.cpp:4579 +#: src/libslic3r/PrintConfig.cpp:4578 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" @@ -15397,11 +15504,11 @@ msgstr "" "debug, 5: traceer\n" "Voorbeeld: loglevel = 2 geeft fataal-, fout- en waarschuwingslevelberichten." -#: src/libslic3r/PrintConfig.cpp:4585 +#: src/libslic3r/PrintConfig.cpp:4584 msgid "Render with a software renderer" msgstr "Render met software-renderer" -#: src/libslic3r/PrintConfig.cpp:4586 +#: src/libslic3r/PrintConfig.cpp:4585 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." @@ -15432,6 +15539,10 @@ msgid "" "your models using theFuzzy skinfeature? You can also use modifiers to " "apply fuzzy-skin only to a portion of your model." msgstr "" +"Oneffen oppervlak\n" +"Wist u dat u een vezelachtige textuur op de zijden van uw object kan " +"aanbrengen met de Oneffen oppervlak optie? U kunt ook modificators " +"toepassen op een oneffen oppervlak voor een gedeelte van het model." #: resources/data/hints.ini: [hint:Shapes gallery] msgid "" @@ -15440,6 +15551,11 @@ msgid "" "models as modifiers, negative volumes or as printable objects. Right-click " "the platter and selectAdd Shape - Gallery." msgstr "" +"Vormengalerij\n" +"Wist u dat PrusaSlicer een vormengalerij heeft? U kunt de vormen daaruit " +"gebruiken als modificators, negatieve volumes, of als printbare objecten. " +"Rechtermuisklik in de modelweergave en selecteer Voeg vorm toe - " +"galerij." #: resources/data/hints.ini: [hint:Arrange settings] msgid "" @@ -15447,6 +15563,9 @@ msgid "" "Did you know that you can right-click theArrange iconto adjust the " "size of the gap between objects and to allow automatic rotations?" msgstr "" +"Schikken-instellingen\n" +"Wist u dat u met de rechtermuisklik op het Schikken icoon de afstand " +"tussen de objecten en automatisch roteren kunt instellen?" #: resources/data/hints.ini: [hint:Negative volume] msgid "" @@ -15456,6 +15575,11 @@ msgid "" "holes directly in PrusaSlicer. Read more in the documentation. (Requires " "Advanced or Expert mode.)" msgstr "" +"Negatief volume\n" +"Wist u dat u volumes van elkaar kunt aftrekken met een negatief volume als " +"modificator? Daarmee kunt u bijvoorbeeld makkelijk verschaalbare gaten " +"aanbrengen, direct in PrusaSlicer. Lees meer in de documentatie (vereist " +"geavanceerde- of expertmodus)." #: resources/data/hints.ini: [hint:Simplify mesh] msgid "" @@ -15464,6 +15588,10 @@ msgid "" "Simplify mesh feature? Right-click the model and select Simplify model. Read " "more in the documentation." msgstr "" +"Mesh vereenvoudigen\n" +"Wist u dat het u het aantal facetten van een mesh kunt reduceren met de Mesh " +"vereenvoudigen optie? Rechtermuisklik op het model en selecteer Mesh " +"vereenvoudigen. Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Reload from disk] msgid "" @@ -15472,6 +15600,10 @@ msgid "" "simply reload it in PrusaSlicer? Right-click the model in the 3D view and " "choose Reload from disk. Read more in the documentation." msgstr "" +"Herlaad van schijf\n" +"Wist u dat als u een nieuwere versie van het model heeft gemaakt, u deze " +"eenvoudig kunt herladen in PrusaSlicer? Rechtermuisklik op het model in de " +"modelweergave en kies Herlaad van schijf. Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Hiding sidebar] msgid "" @@ -15479,6 +15611,9 @@ msgid "" "Did you know that you can hide the right sidebar using the shortcut Shift" "+Tab? You can also enable the icon for this from thePreferences." msgstr "" +"Verberg zijbalk\n" +"Wist u dat u de rechter zijbalk kan verbergen met de sneltoets Shift+Tab? U kunt ook het icoontje aanzetten via de Voorkeuren." #: resources/data/hints.ini: [hint:Perspective camera] msgid "" @@ -15486,6 +15621,9 @@ msgid "" "Did you know that you can use the K key to quickly switch between an " "orthographic and perspective camera?" msgstr "" +"Perspectiefweergave\n" +"Wist u dat u de K-toets kunt gebruiken om snel te schakelen tussen " +"orthografische en perspectiefweergave?" #: resources/data/hints.ini: [hint:Camera Views] msgid "" @@ -15493,6 +15631,9 @@ msgid "" "Did you know that you can use the number keys 0-6 to quickly switch " "between predefined camera angles?" msgstr "" +"Weergave\n" +"Wist us dat u de getallen 0-6 kunt gebruiken voor het snel schakelen " +"tussen vooraf ingestelde camerahoeken?" #: resources/data/hints.ini: [hint:Place on face] msgid "" @@ -15501,6 +15642,10 @@ msgid "" "sits on the print bed? Select thePlace on facefunction or press the " "F key." msgstr "" +"Plaats op vlak\n" +"Wist u dat u snel een model zo kan oriënteren dat het met een vlak van het " +"model op het bed geplaatst wordt? Selecteer Plaats op vlak-functie of " +"druk op de F-toets." #: resources/data/hints.ini: [hint:Set number of instances] msgid "" @@ -15508,6 +15653,9 @@ msgid "" "Did you know that you can right-click a model and set an exact number of " "instances instead of copy-pasting it several times?" msgstr "" +"Stel aantal instanties in\n" +"Wist u dat u met de rechtermuisklik op een model een exact aantal instanties " +"kan instellen zonder meerdere keren te kopiëren en plakken?" #: resources/data/hints.ini: [hint:Combine infill] msgid "" @@ -15516,6 +15664,10 @@ msgid "" "compared to perimeters to save print time using the settingCombine infill " "every." msgstr "" +"Combineer vulling\n" +"Wist u dat u tijd kunt besparen door de laagdikte van de vulling te " +"vermenigvuldigen ten opzichte van die van de perimeters met de instelling " +"Combineer vulling elke." #: resources/data/hints.ini: [hint:Variable layer height] msgid "" @@ -15524,6 +15676,10 @@ msgid "" "different layer height and smooth the transitions between them? Try " "theVariable layer height tool. (Not available for SLA printers.)" msgstr "" +"Variabele laagdikte\n" +"Wist u dat u verschillende delen van uw model kunt printen met een " +"verschillende laagdikte om zo transities tussen delen vloeiender te maken? " +"Probeer de Variabele laagdikte. (Niet beschikbaar voor SLA printers.)" #: resources/data/hints.ini: [hint:Undo/redo history] msgid "" @@ -15531,6 +15687,10 @@ msgid "" "Did you know that you can right-click theundo/redo arrowsto see the " "history of changes and to undo or redo several actions at once?" msgstr "" +"Ongedaan maken / Opnieuw doen lijst\n" +"Wist u dat u met de rechtermuisklik op Ongedaan maken / opnieuw doen " +"pijlen kunt klikken voor een lijst van aanpassingen en meerdere acties " +"tegelijk kunt doen?" #: resources/data/hints.ini: [hint:Different layer height for each model] msgid "" @@ -15540,6 +15700,10 @@ msgid "" "Perimeters and adjust the values in the right panel. Read more in the " "documentation." msgstr "" +"Verschillende laagdikte voor elk model\n" +"Wist u dat u elk model op het bed met een andere laagdikte kunt printen? " +"Rechtermuisklik op het model in de modelweergave, kies Lagen en Perimeters " +"en pas de waarde aan in het rechter menu. Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Solid infill threshold area] msgid "" @@ -15548,6 +15712,10 @@ msgid "" "section be filled with solid infill automatically? Set theSolid infill " "threshold area. (Expert mode only.)" msgstr "" +"Dichte vulling bij oppervlak\n" +"Wist u dat u delen van uw model met een klein doorsnee-oppervlak automatisch " +"met dichte vulling kan vullen? Stel de optie Dichte vulling bij " +"oppervlak in. (alleen in expertmodus)." #: resources/data/hints.ini: [hint:Search functionality] msgid "" @@ -15555,6 +15723,10 @@ msgid "" "Did you know that you use theSearchtool to quickly find a specific " "PrusaSlicer setting? Or use the familiar shortcut Ctrl+F." msgstr "" +"Zoekfuncties\n" +"Wist u dat u de Zoekfunctie kunt gebruiken om snel een specifieke " +"instelling in PrusaSlicer te vinden? Of gebruik de bekende sneltoets Ctrl" +"+F." #: resources/data/hints.ini: [hint:Box selection] msgid "" @@ -15562,6 +15734,10 @@ msgid "" "Did you know that you can do a box selection with Shift+Mouse drag? You can " "also box-deselect objects with Alt+Mouse drag." msgstr "" +"Boxselectie\n" +"Wist u dat u een boxselectie kunt doen door Shift in te drukken en dan met " +"de muis te slepen? U kunt ook deselecteren op deze manier met Alt+muis " +"bewegen." #: resources/data/hints.ini: [hint:Zoom on selected objects or all if none #: selected] @@ -15571,6 +15747,9 @@ msgid "" "b> key? If none are selected, the camera will zoom on all objects in the " "scene." msgstr "" +"Zoom op geselecteerde objecten of op alle objecten als geen geselecteerd is\n" +"Wist u dat u in kunt zoomen op geselecteerde objecten door te drukken op de " +"Z-toets? Als niets geselecteerd is, wordt ingezoomd op alle objecten." #: resources/data/hints.ini: [hint:Printable toggle] msgid "" @@ -15579,6 +15758,10 @@ msgid "" "model without having to move or delete it? Toggle the Printable property of " "a model from the Right-click context menu." msgstr "" +"Als printbaar instellen\n" +"Wist u dat u G-code-generatie kunt uitzetten voor geselecteerde modellen " +"zonder deze te verplaatsen of verwijderen? Zet de Printbaar-optie aan of uit " +"van een model met de rechtermuisklik op een object." #: resources/data/hints.ini: [hint:Mirror] msgid "" @@ -15586,6 +15769,10 @@ msgid "" "Did you know that you can mirror the selected model to create a reversed " "version of it? Right-click the model, select Mirror and pick the mirror axis." msgstr "" +"Spiegelen\n" +"Wist u dat u de geselecteerde modellen kunt spiegelen om een omgekeerd " +"object te verkrijgen? Rechtermuisklik op het model, kies voor Spiegelen en " +"kies over welke as gespiegeld moet worden." #: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 #: degrees] @@ -15595,6 +15782,10 @@ msgid "" "around the Z-axis clockwise or counter-clockwise by pressing Page Up " "or Page Down respectively?" msgstr "" +"PageUp / PageDown snel roteren bij 45 graden\n" +"Wist u dat u snel modellen kunt roteren over 45 graden rond de Z-as (met de " +"klok mee of er tegenin) door te klikken op de PageUp- of PageDown-toetsen?" #: resources/data/hints.ini: [hint:Load config from G-code] msgid "" @@ -15604,6 +15795,11 @@ msgid "" "can use File-Import-Import SL1 / SL1S archive, which also lets you " "reconstruct 3D models from the voxel data." msgstr "" +"Laad configuratie van G-code\n" +"Wist u dat u een configuratie voor printen, filament, en printerprofielen " +"kunt laden door te klikken op Bestand - Importeer - Importeer configuratie? " +"Dit geldt ook voor SL1 / SL1S archieven die u een 3D-model laten " +"reconstrueren van de voxel-data." #: resources/data/hints.ini: [hint:Ironing] msgid "" @@ -15613,6 +15809,11 @@ msgid "" "holes and flatten any lifted plastic. Read more in the documentation. " "(Requires Advanced or Expert mode.)" msgstr "" +"Strijken\n" +"Wist u dat u een glad bovenoppervlak kunt maken door deze te laten strijken? " +"De nozzle gaat dan nogmaals over het oppervlak om kleine gaatjes te vullen " +"en oneffenheden plat te drukken (vereist geavanceerde of expertmodus). Lees " +"meer in de documentatie." #: resources/data/hints.ini: [hint:Paint-on supports] msgid "" @@ -15621,6 +15822,10 @@ msgid "" "where supports should be enforced or blocked? Try thePaint-on supportsfeature. (Requires Advanced or Expert mode.)" msgstr "" +"Support schilderen\n" +"Wist u dat u direct op het model regios kunt schilderen waar support moet of " +"niet mag worden geplaatst? Probeer de support schilderen-functie " +"(vereist geavanceerde of expertmodus)." #: resources/data/hints.ini: [hint:Paint-on seam] msgid "" @@ -15629,6 +15834,10 @@ msgid "" "place the start/endpoint of each perimeter loop? Try theSeam paintingfeature. (Requires Advanced or Expert mode.)" msgstr "" +"Naad schilderen\n" +"Wist u dat u direct op het model regios kunt schilderen waar de naad zich " +"moet bevinden? Probeer de Naad schilderen-functie (vereist " +"geavanceerde of expertmodus)." #: resources/data/hints.ini: [hint:Insert Pause] msgid "" @@ -15638,6 +15847,11 @@ msgid "" "(M601). This can be used to insert magnets, weights or nuts into your " "prints. Read more in the documentation." msgstr "" +"Pauze invoegen\n" +"Wist u dat u een pauze kunt inplannen op een specifieke laag? " +"Rechtermuisklik op de slider in de sliceweergave en selecteer Voeg pauze toe " +"(M601). Dit kan handig zijn voor het plaatsen van magneetjes, gewichtjes, " +"moertjes, etc. in het model. Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Insert Custom G-code] msgid "" @@ -15647,6 +15861,11 @@ msgid "" "custom G-code. With this function you can, for example, create a temperature " "tower. Read more in the documentation." msgstr "" +"Custom G-code invoegen\n" +"Wist u dat u een custom G-code kunt invoegen op een specifieke laag? " +"Linkermuisklik op de laag in de voorbeeldweergave. Dan rechtermuisklik het " +"plus-icoon en selecteer Voeg custom G-code toe. Met deze functie kunt u " +"bijvoorbeeld een temperatuurtoren printen. Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Configuration snapshots] msgid "" @@ -15655,6 +15874,10 @@ msgid "" "user profiles? You can view and move back and forth between snapshots using " "the Configuration - Configuration snapshots menu." msgstr "" +"Configuratiesnapshots\n" +"Wist u dat u terug kunt gaan naar een complete backup van alle systeem- en " +"gebruikersprofielen? U kunt heen en weer bewegen tussen snapshots door " +"middel van het Configuratiesnapshots-menu." #: resources/data/hints.ini: [hint:Minimum shell thickness] msgid "" @@ -15663,6 +15886,10 @@ msgid "" "define theMinimum shell thicknessin millimeters? This feature is " "especially useful when using the variable layer height function." msgstr "" +"Minimale shelldikte\n" +"Wist u dat u in plaats van het aantal boven- en onderlagen de Minimale " +"shelldikte kunt aangeven? Deze optie is handig wanneer een variabele " +"laagdikte wordt gebruikt." #: resources/data/hints.ini: [hint:Settings in non-modal window] msgid "" @@ -15671,6 +15898,11 @@ msgid "" "means you can have settings open on one screen and the G-code Preview on the " "other. Go to thePreferencesand select Settings in non-modal window." msgstr "" +"Instellingen in niet-modaal venster\n" +"Wist u dat u de instellingen kunt openen in een niet-modaal venster? Dit " +"houdt in dat u de instellingen open kunt hebben staan op één scherm en de " +"sliceweergave op een ander scherm. Ga naar Voorkeuren en selecteer " +"Instellingen in niet-modaal venster." #: resources/data/hints.ini: [hint:Adaptive infills] msgid "" @@ -15679,6 +15911,10 @@ msgid "" "to decrease the print time and lower the filament consumption? Read more in " "the documentation." msgstr "" +"Adaptieve vulling\n" +"Wist u dat u adaptief kubische en ondersteunend kubische vulling kunt " +"gebruiken om de printtijd te verkorten en de hoeveelheid filament te " +"reduceren? Lees meer in de documentatie." #: resources/data/hints.ini: [hint:Lightning infill] msgid "" @@ -15687,6 +15923,10 @@ msgid "" "surfaces, save a lot of the filament, and decrease the print time? Read more " "in the documentation." msgstr "" +"Bliksemvulling\n" +"Wist u dat u bliksemvulling kunt toepassen om alleen topvlakken te " +"ondersteunen? Dit bespaart veel filament en reduceert de printtijd. Lees " +"meer in de documentatie." #: resources/data/hints.ini: [hint:Fullscreen mode] msgid "" @@ -15694,6 +15934,9 @@ msgid "" "Did you know that you can switch PrusaSlicer to fullscreen mode? Use the " "F11 hotkey." msgstr "" +"Volledig scherm\n" +"Wist u dat u in PrusaSlicer kunt wisselen naar volledig scherm? Gebruik " +"daarvoor de F11-toets." #: ../src/common/debugrpt.cpp:586 msgid ""