3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'master' into xsdata

Browse source 
Conflicts:
	lib/Slic3r.pm
	lib/Slic3r/ExPolygon.pm
	lib/Slic3r/Fill.pm
	lib/Slic3r/Fill/Rectilinear.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/GUI/Plater.pm
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Layer/Region.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
	lib/Slic3r/TriangleMesh.pm
	t/shells.t
	xs/MANIFEST
This commit is contained in:
Alessandro Ranellucci 2013-08-08 02:10:34 +02:00
commit b38cc2c244
60 changed files with 1432 additions and 798 deletions
Download patch file Download diff file Expand all files Collapse all files

70
t/shells.t
View file

@ -1,4 +1,4 @@
use Test::More tests => 4;
use Test::More tests => 10;
use strict;
use warnings;
@ -84,4 +84,72 @@ use Slic3r::Test;
"correct number of top solid shells is generated in V-shaped object";
}
{
my $config = Slic3r::Config->new_from_defaults;
# we need to check against one perimeter because this test is calibrated
# (shape, extrusion_width) so that perimeters cover the bottom surfaces of
# their lower layer - the test checks that shells are not generated on the
# above layers (thus 'across' the shadow perimeter)
# the test is actually calibrated to leave a narrow bottom region for each
# layer - we test that in case of fill_density = 0 such narrow shells are
# discarded instead of grown
$config->set('perimeters', 1);
$config->set('fill_density', 0);
$config->set('cooling', 0); # prevent speed alteration
$config->set('first_layer_speed', '100%'); # prevent speed alteration
$config->set('layer_height', 0.4);
$config->set('first_layer_height', '100%');
$config->set('extrusion_width', 0.5);
$config->set('bottom_solid_layers', 3);
$config->set('top_solid_layers', 0);
$config->set('solid_infill_speed', 99);
my $print = Slic3r::Test::init_print('V', config => $config);
my %layers = (); # Z => 1
Slic3r::GCode::Reader->new(gcode => Slic3r::Test::gcode($print))->parse(sub {
my ($self, $cmd, $args, $info) = @_;
$layers{$self->Z} = 1
if $info->{extruding} && ($args->{F} // $self->F) == $config->solid_infill_speed*60;
});
is scalar(keys %layers), $config->bottom_solid_layers,
"shells are not propagated across perimeters of the neighbor layer";
}
{
my $config = Slic3r::Config->new_from_defaults;
$config->set('spiral_vase', 1);
$config->set('bottom_solid_layers', 0);
$config->set('skirts', 0);
$config->set('first_layer_height', '100%');
# TODO: this needs to be tested with a model with sloping edges, where starting
# points of each layer are not aligned - in that case we would test that no
# travel moves are left to move to the new starting point - in a cube, end
# points coincide with next layer starting points (provided there's no clipping)
my $test = sub {
my ($model_name, $description) = @_;
my $print = Slic3r::Test::init_print($model_name, config => $config);
my $travel_moves_after_first_extrusion = 0;
my $started_extruding = 0;
my @z_steps = ();
Slic3r::GCode::Reader->new(gcode => Slic3r::Test::gcode($print))->parse(sub {
my ($self, $cmd, $args, $info) = @_;
$started_extruding = 1 if $info->{extruding};
push @z_steps, ($args->{Z} - $self->Z)
if $started_extruding && exists $args->{Z};
$travel_moves_after_first_extrusion++
if $info->{travel} && $started_extruding && !exists $args->{Z};
});
is $travel_moves_after_first_extrusion, 0, "no gaps in spiral vase ($description)";
ok !(grep { $_ > $config->layer_height } @z_steps), "no gaps in Z ($description)";
};
$test->('20mm_cube', 'solid model');
$test->('40x10', 'hollow model');
$config->set('z_offset', -10);
$test->('20mm_cube', 'solid model with negative z-offset');
}
__END__