diff --git a/src/admesh/stl.h b/src/admesh/stl.h
index 117090dd8..43999d365 100644
--- a/src/admesh/stl.h
+++ b/src/admesh/stl.h
@@ -89,33 +89,34 @@ struct stl_neighbors {
 };
 
 struct stl_stats {
-	stl_stats() { this->reset(); }
-	void reset() { memset(this, 0, sizeof(stl_stats)); this->volume = -1.0; }
-	char          header[81];
-	stl_type      type;
-	uint32_t      number_of_facets;
-	stl_vertex    max;
-	stl_vertex    min;
-	stl_vertex    size;
-	float         bounding_diameter;
-	float         shortest_edge;
-	float         volume;
-	int           connected_edges;
-	int           connected_facets_1_edge;
-	int           connected_facets_2_edge;
-	int           connected_facets_3_edge;
-	int           facets_w_1_bad_edge;
-	int           facets_w_2_bad_edge;
-	int           facets_w_3_bad_edge;
-	int           original_num_facets;
-	int           edges_fixed;
-	int           degenerate_facets;
-	int           facets_removed;
-	int           facets_added;
-	int           facets_reversed;
-	int           backwards_edges;
-	int           normals_fixed;
-	int           number_of_parts;
+    stl_stats() { memset(&header, 0, 81); }
+    char          header[81]                = "";
+    stl_type      type                      = (stl_type)0;
+    uint32_t      number_of_facets          = 0;
+    stl_vertex    max                       = stl_vertex::Zero();
+    stl_vertex    min                       = stl_vertex::Zero();
+    stl_vertex    size                      = stl_vertex::Zero();
+    float         bounding_diameter         = 0.f;
+    float         shortest_edge             = 0.f;
+    float         volume                    = -1.f;
+    int           connected_edges           = 0;
+    int           connected_facets_1_edge   = 0;
+    int           connected_facets_2_edge   = 0;
+    int           connected_facets_3_edge   = 0;
+    int           facets_w_1_bad_edge       = 0;
+    int           facets_w_2_bad_edge       = 0;
+    int           facets_w_3_bad_edge       = 0;
+    int           original_num_facets       = 0;
+    int           edges_fixed               = 0;
+    int           degenerate_facets         = 0;
+    int           facets_removed            = 0;
+    int           facets_added              = 0;
+    int           facets_reversed           = 0;
+    int           backwards_edges           = 0;
+    int           normals_fixed             = 0;
+    int           number_of_parts           = 0;
+
+    void clear() { *this = stl_stats(); }
 };
 
 struct stl_file {
@@ -124,7 +125,7 @@ struct stl_file {
 	void clear() {
 		this->facet_start.clear();
 		this->neighbors_start.clear();
-		this->stats.reset();
+        this->stats.clear();
 	}
 
 	size_t memsize() const {
diff --git a/src/libslic3r/Fill/Fill.cpp b/src/libslic3r/Fill/Fill.cpp
index ad308adab..ab20bbddb 100644
--- a/src/libslic3r/Fill/Fill.cpp
+++ b/src/libslic3r/Fill/Fill.cpp
@@ -15,40 +15,39 @@ namespace Slic3r {
 
 struct SurfaceFillParams
 {
-	SurfaceFillParams() : flow(0.f, 0.f, 0.f, false) { memset(this, 0, sizeof(*this)); }
 	// Zero based extruder ID.
-	unsigned int 	extruder;
+    unsigned int 	extruder = 0;
 	// Infill pattern, adjusted for the density etc.
-	InfillPattern  	pattern;
+    InfillPattern  	pattern = InfillPattern(0);
 
     // FillBase
     // in unscaled coordinates
-    coordf_t    	spacing;
+    coordf_t    	spacing = 0.;
     // infill / perimeter overlap, in unscaled coordinates
-    coordf_t    	overlap;
+    coordf_t    	overlap = 0.;
     // Angle as provided by the region config, in radians.
-    float       	angle;
+    float       	angle = 0.f;
     // Non-negative for a bridge.
-    float 			bridge_angle;
+    float 			bridge_angle = 0.f;
 
     // FillParams
-    float       	density;
+    float       	density = 0.f;
     // Don't connect the fill lines around the inner perimeter.
-    bool        	dont_connect;
+    bool        	dont_connect = false;
     // Don't adjust spacing to fill the space evenly.
-    bool        	dont_adjust;
+    bool        	dont_adjust = false;
 
     // width, height of extrusion, nozzle diameter, is bridge
     // For the output, for fill generator.
-	Flow 			flow;
+    Flow 			flow = Flow(0.f, 0.f, 0.f, false);
 
 	// For the output
-	ExtrusionRole	extrusion_role;
+    ExtrusionRole	extrusion_role = ExtrusionRole(0);
 
 	// Various print settings?
 
 	// Index of this entry in a linear vector.
-	size_t 			idx;
+    size_t 			idx = 0;
 
 
 	bool operator<(const SurfaceFillParams &rhs) const {
diff --git a/src/libslic3r/Format/PRUS.cpp b/src/libslic3r/Format/PRUS.cpp
index 03ea71a83..63812929d 100644
--- a/src/libslic3r/Format/PRUS.cpp
+++ b/src/libslic3r/Format/PRUS.cpp
@@ -246,7 +246,7 @@ static void extract_model_from_archive(
                 sscanf(normal_buf[2], "%f", &facet.normal(2)) != 1) {
                 // Normal was mangled. Maybe denormals or "not a number" were stored?
                 // Just reset the normal and silently ignore it.
-                memset(&facet.normal, 0, sizeof(facet.normal));
+                facet.normal = stl_normal::Zero();
             }
             facets.emplace_back(facet);
         }
diff --git a/src/libslic3r/Model.cpp b/src/libslic3r/Model.cpp
index 7526dd16a..1e06f0703 100644
--- a/src/libslic3r/Model.cpp
+++ b/src/libslic3r/Model.cpp
@@ -1462,7 +1462,7 @@ stl_stats ModelObject::get_object_stl_stats() const
         return this->volumes[0]->mesh().stl.stats;
 
     stl_stats full_stats;
-    memset(&full_stats, 0, sizeof(stl_stats));
+    full_stats.volume = 0.f;
 
     // fill full_stats from all objet's meshes
     for (ModelVolume* volume : this->volumes)