Updated the Prusa3D profiles.
This commit is contained in:
bubnikv
parent
b34252bf0f
commit
bb604242aa
@ -1,4 +1,7 @@
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
0.8.1 Output settings and SLA materials update
|
||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.8.0-rc1 Updated SLA profiles
|
||||
@ -18,6 +21,8 @@ min_slic3r_version = 1.42.0-alpha
|
||||
0.4.0-alpha3 Update of SLA profiles
|
||||
0.4.0-alpha2 First SLA profiles
|
||||
min_slic3r_version = 1.41.3-alpha
|
||||
0.4.8 MK2.5/3/S FW update
|
||||
0.4.7 MK2/S/MMU FW update
|
||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
@ -26,6 +31,8 @@ min_slic3r_version = 1.41.3-alpha
|
||||
0.4.1 New MK2.5S and MK3S FW versions
|
||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
min_slic3r_version = 1.41.1
|
||||
0.3.8 MK2.5/3/S FW update
|
||||
0.3.7 MK2/S/MMU FW update
|
||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||
0.3.5 New MK2.5 and MK3 FW versions
|
||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||
@ -60,6 +67,8 @@ min_slic3r_version = 1.41.0-alpha
|
||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||
min_slic3r_version = 1.40.0
|
||||
0.1.16 MK2.5/3/S FW update
|
||||
0.1.15 MK2/S/MMU FW update
|
||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||
0.1.13 New MK2.5 and MK3 FW versions
|
||||
0.1.12 New MK2.5 and MK3 FW versions
|
||||
|
||||
@ -4,8 +4,8 @@
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.8.0
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.8.3
|
||||
# Where to get the updates from?
|
||||
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
||||
changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
@ -105,8 +105,8 @@ external_fill_pattern = rectilinear
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.45
|
||||
extra_perimeters = 0
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extruder_clearance_height = 25
|
||||
extruder_clearance_radius = 45
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
@ -133,7 +133,7 @@ notes =
|
||||
overhangs = 0
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
perimeters = 2
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
@ -213,6 +213,7 @@ support_material_interface_layers = 0
|
||||
support_material_interface_spacing = 0.15
|
||||
support_material_spacing = 1
|
||||
support_material_xy_spacing = 150%
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
|
||||
[print:*0.25nozzleMK3*]
|
||||
external_perimeter_extrusion_width = 0.25
|
||||
@ -245,6 +246,7 @@ max_print_speed = 80
|
||||
perimeters = 3
|
||||
fill_pattern = grid
|
||||
fill_density = 20%
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
|
||||
# Print parameters common to a 0.6mm diameter nozzle.
|
||||
[print:*0.6nozzle*]
|
||||
@ -256,6 +258,7 @@ perimeter_extrusion_width = 0.65
|
||||
solid_infill_extrusion_width = 0.65
|
||||
top_infill_extrusion_width = 0.6
|
||||
support_material_extrusion_width = 0.55
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
|
||||
[print:*0.6nozzleMK3*]
|
||||
external_perimeter_extrusion_width = 0.65
|
||||
@ -268,6 +271,7 @@ top_infill_extrusion_width = 0.6
|
||||
support_material_extrusion_width = 0.55
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 25
|
||||
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||
|
||||
[print:*soluble_support*]
|
||||
overhangs = 1
|
||||
@ -987,7 +991,7 @@ first_layer_temperature = 215
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
temperature = 210
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
@ -1003,7 +1007,7 @@ first_layer_bed_temperature = 85
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
|
||||
temperature = 240
|
||||
|
||||
[filament:*PET06*]
|
||||
@ -1028,7 +1032,7 @@ first_layer_temperature = 255
|
||||
max_fan_speed = 30
|
||||
min_fan_speed = 20
|
||||
temperature = 255
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
|
||||
|
||||
[filament:*FLEX*]
|
||||
inherits = *common*
|
||||
@ -1164,11 +1168,13 @@ temperature = 260
|
||||
inherits = *PET*
|
||||
filament_cost = 56.9
|
||||
filament_density = 1.26
|
||||
filament_type = EDGE
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
||||
|
||||
[filament:E3D PC-ABS]
|
||||
inherits = *ABS*
|
||||
filament_cost = 0
|
||||
filament_type = PC
|
||||
filament_density = 1.05
|
||||
first_layer_temperature = 270
|
||||
temperature = 270
|
||||
@ -1187,12 +1193,14 @@ filament_density = 1.04
|
||||
fan_always_on = 1
|
||||
first_layer_temperature = 265
|
||||
temperature = 265
|
||||
filament_type = ASA
|
||||
|
||||
[filament:Fillamentum CPE HG100 HM100]
|
||||
inherits = *PET*
|
||||
filament_cost = 54.1
|
||||
filament_density = 1.25
|
||||
filament_notes = "CPE HG100 , CPE HM100"
|
||||
filament_type = CPE
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 275
|
||||
max_fan_speed = 50
|
||||
@ -1234,6 +1242,7 @@ filament_notes = "List of materials tested with standard PLA print settings:\n\n
|
||||
inherits = *ABS*
|
||||
filament_cost = 77.3
|
||||
filament_density = 1.20
|
||||
filament_type = PC
|
||||
bed_temperature = 115
|
||||
filament_colour = #3A80CA
|
||||
first_layer_bed_temperature = 100
|
||||
@ -1312,6 +1321,7 @@ first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
filament_type = PETG
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
|
||||
[filament:Prusa PET 0.6 nozzle]
|
||||
@ -1326,6 +1336,7 @@ first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
filament_type = PETG
|
||||
|
||||
[filament:*PET MMU2*]
|
||||
inherits = Prusa PET
|
||||
@ -1352,12 +1363,13 @@ inherits = *PET MMU2*
|
||||
|
||||
[filament:Prusament PETG MMU2]
|
||||
inherits = *PET MMU2*
|
||||
filament_type = PETG
|
||||
|
||||
[filament:Prusa PLA]
|
||||
inherits = *PLA*
|
||||
filament_cost = 25.4
|
||||
filament_density = 1.24
|
||||
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFiberlogy PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nAmazonBasics PLA"
|
||||
|
||||
[filament:Prusament PLA]
|
||||
inherits = *PLA*
|
||||
@ -1409,7 +1421,7 @@ fan_below_layer_time = 20
|
||||
filament_colour = #DEE0E6
|
||||
filament_max_volumetric_speed = 10
|
||||
filament_soluble = 0
|
||||
filament_type = PET
|
||||
filament_type = NYLON
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 5
|
||||
@ -1524,7 +1536,7 @@ fan_below_layer_time = 100
|
||||
filament_colour = #DEE0E6
|
||||
filament_max_volumetric_speed = 5
|
||||
filament_notes = "List of materials tested with standard PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
|
||||
filament_type = PLA
|
||||
filament_type = PP
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 220
|
||||
max_fan_speed = 100
|
||||
@ -1575,6 +1587,9 @@ layer_height = 0.05
|
||||
[sla_print:0.1 Fast]
|
||||
inherits = *common*
|
||||
layer_height = 0.1
|
||||
support_head_front_diameter = 0.5
|
||||
support_head_penetration = 0.5
|
||||
support_pillar_diameter = 1.3
|
||||
|
||||
########### Materials 0.025
|
||||
|
||||
@ -1605,82 +1620,117 @@ initial_layer_height = 0.035
|
||||
inherits = *common 0.05*
|
||||
compatible_prints_condition = layer_height == 0.1
|
||||
exposure_time = 20
|
||||
initial_exposure_time = 90
|
||||
initial_exposure_time = 45
|
||||
initial_layer_height = 0.1
|
||||
|
||||
########### Materials 0.025
|
||||
|
||||
[sla_material:Bluecast Phrozen Wax 0.025]
|
||||
[sla_material:BlueCast Phrozen Wax 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 8
|
||||
exposure_time = 15
|
||||
initial_exposure_time = 50
|
||||
|
||||
[sla_material:BlueCast EcoGray 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:BlueCast Keramaster Dental 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:BlueCast X10 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 4
|
||||
initial_exposure_time = 100
|
||||
|
||||
[sla_material:Prusa Orange Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Grey Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Azure Blue Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Maroon Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Beige Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Pink Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa White Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Transparent Tough 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 15
|
||||
|
||||
[sla_material:Prusa Green Casting 0.025]
|
||||
inherits = *common 0.025*
|
||||
exposure_time = 12
|
||||
initial_exposure_time = 35
|
||||
|
||||
## [sla_material:Prusa Transparent Green Tough 0.025]
|
||||
## inherits = *common 0.025*
|
||||
## exposure_time = 5
|
||||
## initial_exposure_time = 30
|
||||
|
||||
########### Materials 0.05
|
||||
|
||||
[sla_material:3DM-HTR140 (high temperature) 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 12
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Bluecast Ecogray 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Bluecast Keramaster 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Bluecast Keramaster Dental 0.05]
|
||||
[sla_material:BlueCast EcoGray 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 35
|
||||
|
||||
[sla_material:BlueCast Keramaster 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Bluecast LCD-DLP Original 0.05]
|
||||
[sla_material:BlueCast Keramaster Dental 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 50
|
||||
|
||||
[sla_material:BlueCast LCD-DLP Original 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 10
|
||||
initial_exposure_time = 60
|
||||
|
||||
[sla_material:Bluecast Phrozen Wax 0.05]
|
||||
[sla_material:BlueCast Phrozen Wax 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 10
|
||||
initial_exposure_time = 55
|
||||
exposure_time = 16
|
||||
initial_exposure_time = 50
|
||||
|
||||
[sla_material:Bluecast S+ 0.05]
|
||||
[sla_material:BlueCast S+ 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Bluecast X2 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 10
|
||||
initial_exposure_time = 60
|
||||
|
||||
[sla_material:Prusa Skin Tough 0.05]
|
||||
[sla_material:BlueCast X10 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Orange Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Grey Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Black Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
initial_exposure_time = 100
|
||||
|
||||
[sla_material:Monocure 3D Black Rapid Resin 0.05]
|
||||
inherits = *common 0.05*
|
||||
@ -1697,20 +1747,30 @@ inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:Monocure 3D Gray Rapid Resin 0.05]
|
||||
[sla_material:Monocure 3D Grey Rapid Resin 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 40
|
||||
exposure_time = 10
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Monocure 3D White Rapid Resin 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:3DM-HTR140 (high temperature) 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 12
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:3DM-ABS 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 35
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 25
|
||||
|
||||
[sla_material:3DM-BLACK 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 20
|
||||
initial_exposure_time = 40
|
||||
|
||||
[sla_material:3DM-DENT 0.05]
|
||||
inherits = *common 0.05*
|
||||
@ -1737,7 +1797,39 @@ inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
initial_exposure_time = 40
|
||||
|
||||
## [sla_material:Prusa Skin Super Low Odor 0.05]
|
||||
[sla_material:Harz Labs Model Resin Cherry 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Photocentric Hard Grey 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 15
|
||||
initial_exposure_time = 30
|
||||
|
||||
## Prusa
|
||||
|
||||
[sla_material:Prusa Beige Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Orange Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Grey Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Black Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 6
|
||||
initial_exposure_time = 30
|
||||
|
||||
## [sla_material:Prusa Beige Super Low Odor 0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 7.5
|
||||
## initial_exposure_time = 30
|
||||
@ -1752,11 +1844,6 @@ initial_exposure_time = 40
|
||||
## exposure_time = 6.5
|
||||
## initial_exposure_time = 30
|
||||
|
||||
[sla_material:Harz Labs Model Resin Cherry 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 45
|
||||
|
||||
## [sla_material:Prusa Black High Tenacity 0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 7
|
||||
@ -1765,7 +1852,7 @@ initial_exposure_time = 45
|
||||
[sla_material:Prusa Green Casting 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 30
|
||||
initial_exposure_time = 40
|
||||
|
||||
## [sla_material:Prusa Yellow Solid 0.05]
|
||||
## inherits = *common 0.05*
|
||||
@ -1774,10 +1861,10 @@ initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa White Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
exposure_time = 7.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
## [sla_material:Prusa Green Transparent 0.05]
|
||||
## [sla_material:Prusa Transparent Green Tough 0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 6
|
||||
## initial_exposure_time = 30
|
||||
@ -1789,12 +1876,12 @@ initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Maroon Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 9
|
||||
exposure_time = 7.5
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Pink Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Azure Blue Tough 0.05]
|
||||
@ -1802,6 +1889,11 @@ inherits = *common 0.05*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Transparent Tough 0.05]
|
||||
inherits = *common 0.05*
|
||||
exposure_time = 7
|
||||
initial_exposure_time = 15
|
||||
|
||||
## [sla_material:Prusa Yellow Flexible 0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 9
|
||||
@ -1809,8 +1901,8 @@ initial_exposure_time = 30
|
||||
|
||||
## [sla_material:Prusa Clear Flexible 0.05]
|
||||
## inherits = *common 0.05*
|
||||
## exposure_time = 9
|
||||
## initial_exposure_time = 30
|
||||
## exposure_time = 5
|
||||
## initial_exposure_time = 15
|
||||
|
||||
## [sla_material:Prusa White Flexible 0.05]
|
||||
## inherits = *common 0.05*
|
||||
@ -1843,9 +1935,49 @@ initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Orange Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 10
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa Beige Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa Pink Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa Azure Blue Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa Maroon Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa White Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 45
|
||||
|
||||
[sla_material:Prusa Black Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 13
|
||||
initial_exposure_time = 55
|
||||
|
||||
[sla_material:Prusa Transparent Tough 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 8
|
||||
initial_exposure_time = 30
|
||||
|
||||
[sla_material:Prusa Green Casting 0.1]
|
||||
inherits = *common 0.1*
|
||||
exposure_time = 15
|
||||
initial_exposure_time = 50
|
||||
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
@ -1897,7 +2029,7 @@ retract_speed = 35
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
@ -1934,7 +2066,7 @@ printer_model = MK2SMM
|
||||
inherits = *multimaterial*
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
|
||||
start_gcode = M115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
|
||||
[printer:*mm-multi*]
|
||||
@ -1944,7 +2076,7 @@ end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.
|
||||
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
|
||||
start_gcode = M115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
@ -2012,19 +2144,19 @@ min_layer_height = 0.1
|
||||
inherits = Original Prusa i3 MK2S
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2S 0.25 nozzle
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
||||
printer_model = MK2.5
|
||||
remaining_times = 1
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 MMU2 Single]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2*
|
||||
@ -2053,7 +2185,7 @@ machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
|
||||
@ -2095,23 +2227,23 @@ single_extruder_multi_material = 1
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S]
|
||||
inherits = Original Prusa i3 MK2.5
|
||||
printer_model = MK2.5S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5 0.25 nozzle
|
||||
printer_model = MK2.5S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5 0.6 nozzle
|
||||
printer_model = MK2.5S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S Single]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2s*
|
||||
@ -2140,7 +2272,7 @@ machine_min_travel_rate = 0
|
||||
default_print_profile = 0.15mm OPTIMAL MK2.5
|
||||
default_filament_profile = Prusament PLA
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
|
||||
@ -2160,7 +2292,7 @@ min_layer_height = 0.05
|
||||
nozzle_diameter = 0.25
|
||||
printer_variant = 0.25
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S]
|
||||
inherits = Original Prusa i3 MK2.5; *mm2s*
|
||||
@ -2193,7 +2325,7 @@ single_extruder_multi_material = 1
|
||||
# to be defined explicitely.
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
|
||||
@ -2225,7 +2357,7 @@ remaining_times = 1
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
default_print_profile = 0.15mm QUALITY MK3
|
||||
|
||||
@ -2235,7 +2367,7 @@ nozzle_diameter = 0.25
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.6 nozzle]
|
||||
@ -2249,17 +2381,17 @@ default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
||||
[printer:Original Prusa i3 MK3S]
|
||||
inherits = Original Prusa i3 MK3
|
||||
printer_model = MK3S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
|
||||
[printer:Original Prusa i3 MK3S 0.25 nozzle]
|
||||
inherits = Original Prusa i3 MK3 0.25 nozzle
|
||||
printer_model = MK3S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
|
||||
[printer:Original Prusa i3 MK3S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK3 0.6 nozzle
|
||||
printer_model = MK3S
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
||||
|
||||
[printer:*mm2*]
|
||||
inherits = Original Prusa i3 MK3
|
||||
@ -2289,7 +2421,7 @@ default_filament_profile = Prusament PLA MMU2
|
||||
inherits = *mm2*
|
||||
single_extruder_multi_material = 0
|
||||
default_filament_profile = Prusament PLA
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
|
||||
@ -2308,7 +2440,7 @@ nozzle_diameter = 0.25
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2]
|
||||
@ -2319,14 +2451,14 @@ inherits = *mm2*
|
||||
machine_max_acceleration_e = 8000,8000
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S Single]
|
||||
inherits = *mm2s*
|
||||
single_extruder_multi_material = 0
|
||||
default_filament_profile = Prusament PLA
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle]
|
||||
@ -2345,7 +2477,7 @@ nozzle_diameter = 0.25
|
||||
max_layer_height = 0.15
|
||||
min_layer_height = 0.05
|
||||
printer_variant = 0.25
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3S MMU2S]
|
||||
@ -2353,7 +2485,7 @@ inherits = *mm2s*
|
||||
machine_max_acceleration_e = 8000,8000
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
||||
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
# 0.6 nozzle MMU printer profile - only for single mode for now
|
||||
|
||||
Loading…
Reference in New Issue
Block a user