diff --git a/src/slic3r/GUI/Field.cpp b/src/slic3r/GUI/Field.cpp index 33a61a69a..3fc43b726 100644 --- a/src/slic3r/GUI/Field.cpp +++ b/src/slic3r/GUI/Field.cpp @@ -172,7 +172,7 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true if (label.Last() == '\n') label.RemoveLast(); while (label.Last() == ' ') label.RemoveLast(); if (label.Last() == ':') label.RemoveLast(); - show_error(m_parent, wxString::Format(_(L("%s doesn't support percentage")), label)); + show_error(m_parent, from_u8((boost::format(_utf8(L("%s doesn't support percentage"))) % label).str())); set_value(double_to_string(m_opt.min), true); m_value = double(m_opt.min); break; @@ -237,12 +237,12 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true const std::string sidetext = m_opt.sidetext.rfind("mm/s") != std::string::npos ? "mm/s" : "mm"; const wxString stVal = double_to_string(val, 2); - const wxString msg_text = wxString::Format(_(L("Do you mean %s%% instead of %s %s?\n" + const wxString msg_text = from_u8((boost::format(_utf8(L("Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" - "or NO if you are sure that %s %s is a correct value.")), stVal, stVal, sidetext, stVal, stVal, sidetext); + "or NO if you are sure that %s %s is a correct value."))) % stVal % stVal % sidetext % stVal % stVal % sidetext).str()); wxMessageDialog dialog(m_parent, msg_text, _(L("Parameter validation")) + ": " + m_opt_id , wxICON_WARNING | wxYES | wxNO); if (dialog.ShowModal() == wxID_YES) { - set_value(wxString::Format("%s%%", stVal), false/*true*/); + set_value(from_u8((boost::format("%s%%") % stVal).str()), false/*true*/); str += "%%"; } else diff --git a/src/slic3r/GUI/GLCanvas3DManager.cpp b/src/slic3r/GUI/GLCanvas3DManager.cpp index e99d8b2f6..02585c5f7 100644 --- a/src/slic3r/GUI/GLCanvas3DManager.cpp +++ b/src/slic3r/GUI/GLCanvas3DManager.cpp @@ -302,9 +302,9 @@ void GLCanvas3DManager::init_gl() if (! s_gl_info.is_version_greater_or_equal_to(2, 0)) { // Complain about the OpenGL version. - wxString message = wxString::Format( - _(L("PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" - "while OpenGL version %s, render %s, vendor %s was detected.")), wxString(s_gl_info.get_version()), wxString(s_gl_info.get_renderer()), wxString(s_gl_info.get_vendor())); + wxString message = from_u8((boost::format( + _utf8(L("PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" + "while OpenGL version %s, render %s, vendor %s was detected."))) % s_gl_info.get_version() % s_gl_info.get_renderer() % s_gl_info.get_vendor()).str()); message += "\n"; message += _(L("You may need to update your graphics card driver.")); #ifdef _WIN32 diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp index 5bcfc136c..7ca8753a1 100644 --- a/src/slic3r/GUI/GUI_App.cpp +++ b/src/slic3r/GUI/GUI_App.cpp @@ -798,7 +798,7 @@ void GUI_App::add_config_menu(wxMenuBar *menu) wxWindowID config_id_base = wxWindow::NewControlId(int(ConfigMenuCnt)); const auto config_wizard_name = _(ConfigWizard::name(true)); - const auto config_wizard_tooltip = wxString::Format(_(L("Run %s")), config_wizard_name); + const auto config_wizard_tooltip = from_u8((boost::format(_utf8(L("Run %s"))) % config_wizard_name).str()); // Cmd+, is standard on OS X - what about other operating systems? local_menu->Append(config_id_base + ConfigMenuWizard, config_wizard_name + dots, config_wizard_tooltip); local_menu->Append(config_id_base + ConfigMenuSnapshots, _(L("&Configuration Snapshots")) + dots, _(L("Inspect / activate configuration snapshots"))); diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp index 66c859799..961fc2077 100644 --- a/src/slic3r/GUI/GUI_ObjectList.cpp +++ b/src/slic3r/GUI/GUI_ObjectList.cpp @@ -354,7 +354,7 @@ wxString ObjectList::get_mesh_errors_list(const int obj_idx, const int vol_idx / for (const auto& error : error_msg) if (error.second > 0) - tooltip += wxString::Format("\t%d %s\n", error.second, _(error.first)); + tooltip += from_u8((boost::format("\t%1% %2%\n") % error.second % _utf8(error.first)).str()); if (is_windows10()) tooltip += _(L("Right button click the icon to fix STL through Netfabb")); @@ -1180,7 +1180,7 @@ const std::vector& ObjectList::get_options_for_bundle(const wxStrin for (auto& it : bundle_quick) { - if ( bundle_name == wxString::Format(_(L("Quick Add Settings (%s)")), _(it.first)) ) + if ( bundle_name == from_u8((boost::format(_utf8(L("Quick Add Settings (%s)"))) % _(it.first)).str()) ) return it.second; } #endif @@ -1528,13 +1528,13 @@ wxMenuItem* ObjectList::append_menu_item_settings(wxMenu* menu_) #if 0 for (auto& it : m_freq_settings_fff) { - settings_id = menu->FindItem(wxString::Format(_(L("Quick Add Settings (%s)")), _(it.first))); + settings_id = menu->FindItem(from_u8((boost::format(_utf8(L("Quick Add Settings (%s)"))) % _(it.first)).str())); if (settings_id != wxNOT_FOUND) menu->Destroy(settings_id); } for (auto& it : m_freq_settings_sla) { - settings_id = menu->FindItem(wxString::Format(_(L("Quick Add Settings (%s)")), _(it.first))); + settings_id = menu->FindItem(from_u8((boost::format(_utf8(L("Quick Add Settings (%s)"))) % _(it.first)).str())); if (settings_id != wxNOT_FOUND) menu->Destroy(settings_id); } @@ -1847,7 +1847,7 @@ void ObjectList::create_freq_settings_popupmenu(wxMenu *menu, const bool is_obje if (improper_category(it.first, extruders_cnt)) continue; - append_menu_item(menu, wxID_ANY, wxString::Format(_(L("Quick Add Settings (%s)")), _(it.first)), "", + append_menu_item(menu, wxID_ANY, from_u8((boost::format(_utf8(L("Quick Add Settings (%s)"))) % _(it.first)).str()), "", [menu, this](wxCommandEvent& event) { get_freq_settings_choice(menu->GetLabel(event.GetId())); }, CATEGORY_ICON.find(it.first) == CATEGORY_ICON.end() ? wxNullBitmap : CATEGORY_ICON.at(it.first), menu, [this]() { return true; }, wxGetApp().plater()); @@ -4091,9 +4091,9 @@ void ObjectList::toggle_printable_state(wxDataViewItem item) // get object's printable and change it const bool printable = !m_objects_model->IsPrintable(item); - const wxString snapshot_text = wxString::Format("%s %s", - printable ? _(L("Set Printable")) : _(L("Set Unprintable")), - object->name); + const wxString snapshot_text = from_u8((boost::format("%1% %2%") + % (printable ? _(L("Set Printable")) : _(L("Set Unprintable"))) + % object->name).str()); take_snapshot(snapshot_text); // set printable value for all instances in object diff --git a/src/slic3r/GUI/GUI_ObjectSettings.cpp b/src/slic3r/GUI/GUI_ObjectSettings.cpp index 58daec8b7..1447e0768 100644 --- a/src/slic3r/GUI/GUI_ObjectSettings.cpp +++ b/src/slic3r/GUI/GUI_ObjectSettings.cpp @@ -98,7 +98,7 @@ bool ObjectSettings::update_settings_list() btn->SetBitmapHover(m_bmp_delete_focus.bmp()); btn->Bind(wxEVT_BUTTON, [opt_key, config, this](wxEvent &event) { - wxGetApp().plater()->take_snapshot(wxString::Format(_(L("Delete Option %s")), opt_key)); + wxGetApp().plater()->take_snapshot(from_u8((boost::format(_utf8(L("Delete Option %s"))) % opt_key).str())); config->erase(opt_key); wxGetApp().obj_list()->changed_object(); wxTheApp->CallAfter([this]() { @@ -149,7 +149,7 @@ bool ObjectSettings::update_settings_list() optgroup->get_field(opt)->m_on_change = [optgroup](const std::string& opt_id, const boost::any& value) { // first of all take a snapshot and then change value in configuration - wxGetApp().plater()->take_snapshot(wxString::Format(_(L("Change Option %s")), opt_id)); + wxGetApp().plater()->take_snapshot(from_u8((boost::format(_utf8(L("Change Option %s"))) % opt_id).str())); optgroup->on_change_OG(opt_id, value); }; diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp index 9527b6c29..18e43388a 100644 --- a/src/slic3r/GUI/MainFrame.cpp +++ b/src/slic3r/GUI/MainFrame.cpp @@ -827,7 +827,7 @@ void MainFrame::quick_slice(const int qs) } else if (qs & qsSaveAs) { // The following line may die if the output_filename_format template substitution fails. - wxFileDialog dlg(this, wxString::Format(_(L("Save %s file as:")) , qs & qsExportSVG ? _(L("SVG")) : _(L("G-code")) ), + wxFileDialog dlg(this, from_u8((boost::format(_utf8(L("Save %s file as:"))) % ((qs & qsExportSVG) ? _(L("SVG")) : _(L("G-code")))).str()), wxGetApp().app_config->get_last_output_dir(get_dir_name(output_file)), get_base_name(input_file), qs & qsExportSVG ? file_wildcards(FT_SVG) : file_wildcards(FT_GCODE), wxFD_SAVE | wxFD_OVERWRITE_PROMPT); @@ -850,7 +850,7 @@ void MainFrame::quick_slice(const int qs) // show processbar dialog m_progress_dialog = new wxProgressDialog(_(L("Slicing")) + dots, // TRN "Processing input_file_basename" - wxString::Format(_(L("Processing %s")), input_file_basename + dots), + from_u8((boost::format(_utf8(L("Processing %s"))) % (input_file_basename + dots)).str()), 100, this, 4); m_progress_dialog->Pulse(); { diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index 0ebad64d1..a57225954 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -1191,7 +1191,7 @@ void Sidebar::update_sliced_info_sizer() wxString new_label = _(L("Used Material (ml)")) + " :"; const bool is_supports = ps.support_used_material > 0.0; if (is_supports) - new_label += wxString::Format("\n - %s\n - %s", _(L("object(s)")), _(L("supports and pad"))); + new_label += from_u8((boost::format("\n - %s\n - %s") % _utf8(L("object(s)")) % _utf8(L("supports and pad"))).str()); wxString info_text = is_supports ? wxString::Format("%.2f \n%.2f \n%.2f", (ps.objects_used_material + ps.support_used_material) / 1000, @@ -1228,7 +1228,7 @@ void Sidebar::update_sliced_info_sizer() wxString new_label = _(L("Used Filament (m)")); if (is_wipe_tower) - new_label += wxString::Format(" :\n - %s\n - %s", _(L("objects")), _(L("wipe tower"))); + new_label += from_u8((boost::format(" :\n - %1%\n - %2%") % _utf8(L("objects")) % _utf8(L("wipe tower"))).str()); wxString info_text = is_wipe_tower ? wxString::Format("%.2f \n%.2f \n%.2f", ps.total_used_filament / 1000, @@ -1242,7 +1242,7 @@ void Sidebar::update_sliced_info_sizer() new_label = _(L("Cost")); if (is_wipe_tower) - new_label += wxString::Format(" :\n - %s\n - %s", _(L("objects")), _(L("wipe tower"))); + new_label += from_u8((boost::format(" :\n - %1%\n - %2%") % _utf8(L("objects")) % _utf8(L("wipe tower"))).str()); info_text = ps.total_cost == 0.0 ? "N/A" : is_wipe_tower ? @@ -1271,25 +1271,25 @@ void Sidebar::update_sliced_info_sizer() for (int i = (int)times.size() - 1; i >= 0; --i) { if (i == 0 || times[i - 1].first == cgtPausePrint) - new_label += wxString::Format("\n - %s%d", str_color + " ", color_change_count); + new_label += from_u8((boost::format("\n - %1%%2%") % (std::string(str_color.ToUTF8()) + " ") % color_change_count).str()); else if (times[i - 1].first == cgtColorChange) - new_label += wxString::Format("\n - %s%d", str_color + " ", color_change_count--); + new_label += from_u8((boost::format("\n - %1%%2%") % (std::string(str_color.ToUTF8()) + " ") % color_change_count--).str()); if (i != (int)times.size() - 1 && times[i].first == cgtPausePrint) - new_label += wxString::Format(" -> %s", str_pause); + new_label += from_u8((boost::format(" -> %1%") % std::string(str_pause.ToUTF8())).str()); - info_text += wxString::Format("\n%s", times[i].second); + info_text += from_u8((boost::format("\n%1%") % times[i].second).str()); } }; if (ps.estimated_normal_print_time != "N/A") { - new_label += wxString::Format("\n - %s", _(L("normal mode"))); - info_text += wxString::Format("\n%s", ps.estimated_normal_print_time); + new_label += from_u8((boost::format("\n - %1%") % _utf8(L("normal mode"))).str()); + info_text += from_u8((boost::format("\n%1%") % ps.estimated_normal_print_time).str()); fill_labels(ps.estimated_normal_custom_gcode_print_times, new_label, info_text); } if (ps.estimated_silent_print_time != "N/A") { - new_label += wxString::Format("\n - %s", _(L("stealth mode"))); - info_text += wxString::Format("\n%s", ps.estimated_silent_print_time); + new_label += from_u8((boost::format("\n - %1%") % _utf8(L("stealth mode"))).str()); + info_text += from_u8((boost::format("\n%1%") % ps.estimated_silent_print_time).str()); fill_labels(ps.estimated_silent_custom_gcode_print_times, new_label, info_text); } p->sliced_info->SetTextAndShow(siEstimatedTime, info_text, new_label); @@ -2280,7 +2280,7 @@ std::vector Plater::priv::load_files(const std::vector& input_ for (size_t i = 0; i < input_files.size(); i++) { const auto &path = input_files[i]; const auto filename = path.filename(); - const auto dlg_info = wxString::Format(_(L("Processing input file %s")), from_path(filename)) + "\n"; + const auto dlg_info = from_u8((boost::format(_utf8(L("Processing input file %s"))) % from_path(filename)).str()) + "\n"; dlg.Update(100 * i / input_files.size(), dlg_info); const bool type_3mf = std::regex_match(path.string(), pattern_3mf); @@ -2387,8 +2387,8 @@ std::vector Plater::priv::load_files(const std::vector& input_ for (auto obj : model.objects) if ( obj->volumes.size()>1 ) { Slic3r::GUI::show_error(nullptr, - wxString::Format(_(L("You can't to add the object(s) from %s because of one or some of them is(are) multi-part")), - from_path(filename))); + from_u8((boost::format(_utf8(L("You can't to add the object(s) from %s because of one or some of them is(are) multi-part"))) + % from_path(filename)).str())); return obj_idxs; } } @@ -4982,7 +4982,7 @@ void Plater::export_stl(bool extended, bool selection_only) } Slic3r::store_stl(path_u8.c_str(), &mesh, true); - p->statusbar()->set_status_text(wxString::Format(_(L("STL file exported to %s")), path)); + p->statusbar()->set_status_text(from_u8((boost::format(_utf8(L("STL file exported to %s"))) % path).str())); } void Plater::export_amf() @@ -4999,10 +4999,10 @@ void Plater::export_amf() bool full_pathnames = wxGetApp().app_config->get("export_sources_full_pathnames") == "1"; if (Slic3r::store_amf(path_u8.c_str(), &p->model, export_config ? &cfg : nullptr, full_pathnames)) { // Success - p->statusbar()->set_status_text(wxString::Format(_(L("AMF file exported to %s")), path)); + p->statusbar()->set_status_text(from_u8((boost::format(_utf8(L("AMF file exported to %s"))) % path).str())); } else { // Failure - p->statusbar()->set_status_text(wxString::Format(_(L("Error exporting AMF file %s")), path)); + p->statusbar()->set_status_text(from_u8((boost::format(_utf8(L("Error exporting AMF file %s"))) % path).str())); } } @@ -5035,12 +5035,12 @@ void Plater::export_3mf(const boost::filesystem::path& output_path) if (Slic3r::store_3mf(path_u8.c_str(), &p->model, export_config ? &cfg : nullptr, full_pathnames)) { #endif // ENABLE_THUMBNAIL_GENERATOR // Success - p->statusbar()->set_status_text(wxString::Format(_(L("3MF file exported to %s")), path)); + p->statusbar()->set_status_text(from_u8((boost::format(_utf8(L("3MF file exported to %s"))) % path).str())); p->set_project_filename(path); } else { // Failure - p->statusbar()->set_status_text(wxString::Format(_(L("Error exporting 3MF file %s")), path)); + p->statusbar()->set_status_text(from_u8((boost::format(_utf8(L("Error exporting 3MF file %s"))) % path).str())); } }