3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merged 2.5.0-beta1 into master (NO CONFLICTS FIXED)

Browse source
This commit is contained in:
Lukas Matena 2022-08-15 13:41:34 +02:00
commit bce2b148f4
99 changed files with 22989 additions and 14036 deletions
src/libslic3r
PrintConfig.cpp

53
src/libslic3r/PrintConfig.cpp
View file

@ -3075,7 +3075,8 @@ void PrintConfigDef::init_fff_params()
def->category = L("Layers and Perimeters");
def->tooltip = L("Classic perimeter generator produces perimeters with constant extrusion width and for "
"very thin areas is used gap-fill. "
"Arachne engine produces perimeters with variable extrusion width.");
"Arachne engine produces perimeters with variable extrusion width. "
"This setting also affects the Concentric infill.");
def->enum_keys_map = &ConfigOptionEnum<PerimeterGeneratorType>::get_enum_values();
def->enum_values.push_back("classic");
def->enum_values.push_back("arachne");
@ -3084,15 +3085,16 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<PerimeterGeneratorType>(PerimeterGeneratorType::Arachne));
def = this->add("wall_transition_length", coFloat);
def = this->add("wall_transition_length", coFloatOrPercent);
def->label = L("Perimeter transition length");
def->category = L("Advanced");
def->tooltip = L("When transitioning between different numbers of perimeters as the part becomes "
"thinner, a certain amount of space is allotted to split or join the perimeter segments.");
def->sidetext = L("mm");
"thinner, a certain amount of space is allotted to split or join the perimeter segments. "
"If expressed as a percentage (for example 100%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.4));
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("wall_transition_filter_deviation", coFloatOrPercent);
def->label = L("Perimeter transitioning filter margin");
@ -3131,46 +3133,17 @@ void PrintConfigDef::init_fff_params()
def->min = 1;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("wall_split_middle_threshold", coPercent);
def->label = L("Split middle perimeter threshold");
def->category = L("Advanced");
def->tooltip = L("The smallest extrusion width, as a factor of the normal extrusion width, above which the middle "
"perimeter (if there is one) will be split into two. Reduce this setting to use more, thinner "
"perimeters. Increase to use fewer, wider perimeters. Note that this applies -as if- the entire "
"shape should be filled with perimeter, so the middle here refers to the middle of the object "
"between two outer edges of the shape, even if there actually is infill or other extrusion types in "
"the print instead of the perimeter.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 1;
def->max = 99;
def->set_default_value(new ConfigOptionPercent(50));
def = this->add("wall_add_middle_threshold", coPercent);
def->label = L("Add middle perimeter threshold");
def->category = L("Advanced");
def->tooltip = L("The smallest extrusion width, as a factor of the normal extrusion width, above which a middle "
"perimeter (if there wasn't one already) will be added. Reduce this setting to use more, "
"thinner perimeters. Increase to use fewer, wider perimeters. Note that this applies -as if- the "
"entire shape should be filled with perimeter, so the middle here refers to the middle of the "
"object between two outer edges of the shape, even if there actually is infill or other "
"extrusion types in the print instead of the perimeter.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 1;
def->max = 99;
def->set_default_value(new ConfigOptionPercent(75));
def = this->add("min_feature_size", coFloat);
def = this->add("min_feature_size", coFloatOrPercent);
def->label = L("Minimum feature size");
def->category = L("Advanced");
def->tooltip = L("Minimum thickness of thin features. Model features that are thinner than this value will "
"not be printed, while features thicker than the Minimum feature size will be widened to "
"the Minimum perimeter width.");
def->sidetext = L("mm");
"the Minimum perimeter width. "
"If expressed as a percentage (for example 25%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.1));
def->set_default_value(new ConfigOptionFloatOrPercent(25, true));
def = this->add("min_bead_width", coFloatOrPercent);
def->label = L("Minimum perimeter width");
@ -4048,6 +4021,8 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
"serial_port", "serial_speed",
// Introduced in some PrusaSlicer 2.3.1 alpha, later renamed or removed.
"fuzzy_skin_perimeter_mode", "fuzzy_skin_shape",
// Introduced in PrusaSlicer 2.3.0-alpha2, later replaced by automatic calculation based on extrusion width.
"wall_add_middle_threshold", "wall_split_middle_threshold",
};
// In PrusaSlicer 2.3.0-alpha0 the "monotonous" infill was introduced, which was later renamed to "monotonic".