Ported ExtrusionPath::Collection

lib/Slic3r/ExtrusionPath/Collection.pm

@@ -1,25 +1,19 @@
 package Slic3r::ExtrusionPath::Collection;
-use Moo;
+use strict;
-
+use warnings;
-has 'paths' => (is => 'rw', default => sub { [] });
-has 'no_sort' => (is => 'rw');
-
-# no-op
-sub unpack { $_[0] }
 
 sub first_point {
     my $self = shift;
-    return $self->paths->[0]->polyline->[0];
+    return $self->[0]->[0];
 }
 
-# Note that our paths will be reversed in place when necessary.
 # (Same algorithm as Polyline::Collection)
 sub chained_path {
     my $self = shift;
     my ($start_near, $no_reverse) = @_;
     
-    return @{$self->paths} if $self->no_sort;
+    my @my_paths = @$self;
-    my @my_paths = @{$self->paths};
+    return @my_paths if $self->no_sort;
     
     my @paths = ();
     my $start_at;
@@ -34,6 +28,7 @@ sub chained_path {
 
         my $path_index = int($start_index/2);
         if ($start_index % 2 && !$no_reverse) { # index is end so reverse to make it the start
+            # path is reversed in place, but we got a copy from XS
             $my_paths[$path_index]->reverse;
         }
         push @paths, splice @my_paths, $path_index, 1;

lib/Slic3r/Fill.pm

@@ -170,9 +170,9 @@ sub make_fill {
         $params->{flow_spacing} = $layerm->extruders->{infill}->bridge_flow->width if $is_bridge;
         
         # save into layer
-        push @fills, Slic3r::ExtrusionPath::Collection->new(
+        push @fills, my $collection = Slic3r::ExtrusionPath::Collection->new;
-            no_sort => $params->{no_sort},
+        $collection->no_sort($params->{no_sort});
-            paths => [
+        $collection->append(
             map Slic3r::ExtrusionPath->new(
                 polyline => Slic3r::Polyline->new(@$_),
                 role => ($surface->surface_type == S_TYPE_INTERNALBRIDGE
@@ -185,14 +185,13 @@ sub make_fill {
                 height => $surface->thickness,
                 flow_spacing => $params->{flow_spacing} || (warn "Warning: no flow_spacing was returned by the infill engine, please report this to the developer\n"),
             ), @polylines,
-            ],
         );
         push @fills_ordering_points, $polylines[0][0];
     }
     
     # add thin fill regions
     push @fills, @{$layerm->thin_fills};
-    push @fills_ordering_points, map $_->points->[0], @{$layerm->thin_fills};
+    push @fills_ordering_points, map $_->[0], @{$layerm->thin_fills};
     
     # organize infill paths using a nearest-neighbor search
     @fills = @fills[ chained_path(\@fills_ordering_points) ];

lib/Slic3r/GCode.pm

@@ -211,9 +211,11 @@ sub extrude_loop {
             $extrusion_path->intersect_expolygons($self->_layer_overhangs);
         
         # reapply the nearest point search for starting point
-        @paths = Slic3r::ExtrusionPath::Collection
+        {
-            ->new(paths => [@paths])
+            my $collection = Slic3r::ExtrusionPath::Collection->new;
-            ->chained_path($start_at, 1);
+            $collection->append(@paths);
+            @paths = $collection->chained_path($start_at, 1);
+        }
     } else {
         push @paths, $extrusion_path;
     }

lib/Slic3r/Layer/Region.pm

@@ -281,7 +281,7 @@ sub make_perimeters {
     push @{ $self->perimeters }, @loops;
     
     # add thin walls as perimeters
-    push @{ $self->perimeters }, Slic3r::ExtrusionPath::Collection->new(paths => [
+    push @{ $self->perimeters }, Slic3r::ExtrusionPath::Collection->new(
         map {
             Slic3r::ExtrusionPath->new(
                 polyline        => ($_->isa('Slic3r::Polygon') ? $_->split_at_first_point : $_),
@@ -289,7 +289,7 @@ sub make_perimeters {
                 flow_spacing    => $self->perimeter_flow->spacing,
             );
         } @{ $self->thin_walls }
-    ])->chained_path;
+    )->chained_path;
 }
 
 sub _fill_gaps {

xs/lib/Slic3r/XS.pm

@@ -38,6 +38,11 @@ use overload
     '@{}' => sub { $_[0]->arrayref },
     'fallback' => 1;
 
+package Slic3r::ExtrusionPath::Collection;
+use overload
+    '@{}' => sub { $_[0]->arrayref },
+    'fallback' => 1;
+
 package Slic3r::ExtrusionLoop;
 use overload
     '@{}' => sub { $_[0]->arrayref },

xs/src/ExPolygon.hpp

@@ -23,6 +23,7 @@ class ExPolygon
 };
 
 typedef std::vector<ExPolygon> ExPolygons;
+typedef std::vector<ExPolygon*> ExPolygonsPtr;
 
 }
 

xs/src/ExPolygonCollection.cpp

@@ -5,24 +5,24 @@ namespace Slic3r {
 void
 ExPolygonCollection::scale(double factor)
 {
-    for (ExPolygons::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
+    for (ExPolygonsPtr::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
-        (*it).scale(factor);
+        (**it).scale(factor);
     }
 }
 
 void
 ExPolygonCollection::translate(double x, double y)
 {
-   for (ExPolygons::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
+   for (ExPolygonsPtr::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
-        (*it).translate(x, y);
+        (**it).translate(x, y);
     }
 }
 
 void
 ExPolygonCollection::rotate(double angle, Point* center)
 {
-    for (ExPolygons::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
+    for (ExPolygonsPtr::iterator it = expolygons.begin(); it != expolygons.end(); ++it) {
-        (*it).rotate(angle, center);
+        (**it).rotate(angle, center);
     }
 }
 

xs/src/ExPolygonCollection.hpp

@@ -9,8 +9,7 @@ namespace Slic3r {
 class ExPolygonCollection
 {
     public:
-    ExPolygons expolygons;
+    ExPolygonsPtr expolygons;
-    SV* arrayref();
     void scale(double factor);
     void translate(double x, double y);
     void rotate(double angle, Point* center);

xs/src/ExtrusionEntity.hpp

@@ -25,11 +25,14 @@ enum ExtrusionRole {
 class ExtrusionEntity
 {
     public:
+    virtual ~ExtrusionEntity() {};
     ExtrusionRole role;
     double height;  // vertical thickness of the extrusion expressed in mm
     double flow_spacing;
 };
 
+typedef std::vector<ExtrusionEntity*> ExtrusionEntitiesPtr;
+
 class ExtrusionPath : public ExtrusionEntity
 {
     public:

xs/src/ExtrusionEntityCollection.hpp

@@ -0,0 +1,18 @@
+#ifndef slic3r_ExtrusionEntityCollection_hpp_
+#define slic3r_ExtrusionEntityCollection_hpp_
+
+#include <myinit.h>
+#include "ExtrusionEntity.hpp"
+
+namespace Slic3r {
+
+class ExtrusionEntityCollection
+{
+    public:
+    ExtrusionEntitiesPtr entities;
+    bool no_sort;
+};
+
+}
+
+#endif

xs/src/Surface.hpp

@@ -19,6 +19,9 @@ class Surface
     bool            in_collection;
 };
 
+typedef std::vector<Surface> Surfaces;
+typedef std::vector<Surface*> SurfacesPtr;
+
 }
 
 #endif

xs/src/SurfaceCollection.hpp

@@ -5,13 +5,10 @@
 
 namespace Slic3r {
 
-typedef std::vector<Surface> Surfaces;
-
 class SurfaceCollection
 {
     public:
-    Surfaces surfaces;
+    SurfacesPtr surfaces;
-    SV* arrayref();
 };
 
 }

xs/t/12_extrusionpathcollection.t

@@ -0,0 +1,37 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+use Slic3r::XS;
+use Test::More tests => 5;
+
+my $points = [
+    [100, 100],
+    [200, 100],
+    [200, 200],
+];
+
+my $path = Slic3r::ExtrusionPath->new(
+    polyline => Slic3r::Polyline->new(@$points),
+    role     => Slic3r::ExtrusionPath::EXTR_ROLE_EXTERNAL_PERIMETER,
+);
+
+my $loop = Slic3r::ExtrusionLoop->new(
+    polygon => Slic3r::Polygon->new(@$points),
+    role     => Slic3r::ExtrusionPath::EXTR_ROLE_FILL,
+);
+
+my $collection = Slic3r::ExtrusionPath::Collection->new;
+isa_ok $collection, 'Slic3r::ExtrusionPath::Collection', 'collection object';
+
+$collection->append($path);
+is scalar(@$collection), 1, 'append ExtrusionPath';
+
+$collection->append($loop);
+is scalar(@$collection), 2, 'append ExtrusionLoop';
+
+isa_ok $collection->[0], 'Slic3r::ExtrusionPath', 'correct object returned for path';
+isa_ok $collection->[1], 'Slic3r::ExtrusionLoop', 'correct object returned for loop';
+
+__END__

xs/xsp/ExPolygonCollection.xsp

@@ -24,8 +24,9 @@ ExPolygonCollection::new(...)
         RETVAL->expolygons.resize(items-1);
         for (unsigned int i = 1; i < items; i++) {
             // Note: a COPY of the input is stored
-            RETVAL->expolygons[i-1].from_SV_check(ST(i));
+            RETVAL->expolygons[i-1] = new ExPolygon;
-            RETVAL->expolygons[i-1].in_collection = true;
+            RETVAL->expolygons[i-1]->from_SV_check(ST(i));
+            RETVAL->expolygons[i-1]->in_collection = true;
         }
     OUTPUT:
         RETVAL
@@ -36,9 +37,9 @@ ExPolygonCollection::arrayref()
         AV* av = newAV();
         av_fill(av, THIS->expolygons.size()-1);
         int i = 0;
-        for (ExPolygons::iterator it = THIS->expolygons.begin(); it != THIS->expolygons.end(); ++it) {
+        for (ExPolygonsPtr::iterator it = THIS->expolygons.begin(); it != THIS->expolygons.end(); ++it) {
             SV* sv = newSV(0);
-            sv_setref_pv( sv, "Slic3r::ExPolygon", &*it );
+            sv_setref_pv( sv, "Slic3r::ExPolygon", *it );
             av_store(av, i++, sv);
         }
         RETVAL = newRV_noinc((SV*)av);
@@ -51,8 +52,8 @@ ExPolygonCollection::pp()
         AV* av = newAV();
         av_fill(av, THIS->expolygons.size()-1);
         int i = 0;
-        for (ExPolygons::iterator it = THIS->expolygons.begin(); it != THIS->expolygons.end(); ++it) {
+        for (ExPolygonsPtr::iterator it = THIS->expolygons.begin(); it != THIS->expolygons.end(); ++it) {
-            av_store(av, i++, (*it).to_SV_pureperl());
+            av_store(av, i++, (*it)->to_SV_pureperl());
         }
         RETVAL = newRV_noinc((SV*)av);
     OUTPUT:
@@ -62,9 +63,9 @@ void
 ExPolygonCollection::append(...)
     CODE:
         for (unsigned int i = 1; i < items; i++) {
-            ExPolygon expolygon;
+            ExPolygon* expolygon = new ExPolygon;
-            expolygon.from_SV_check( ST(i) );
+            expolygon->from_SV_check( ST(i) );
-            expolygon.in_collection = true;
+            expolygon->in_collection = true;
             THIS->expolygons.push_back(expolygon);
         }
 

xs/xsp/ExtrusionEntityCollection.xsp

@@ -0,0 +1,59 @@
+%module{Slic3r::XS};
+
+%{
+#include <myinit.h>
+#include "ExtrusionEntityCollection.hpp"
+%}
+
+%name{Slic3r::ExtrusionPath::Collection} class ExtrusionEntityCollection {
+    ExtrusionEntityCollection();
+    ~ExtrusionEntityCollection();
+    void clear()
+        %code{% THIS->entities.clear(); %};
+%{
+
+SV*
+ExtrusionEntityCollection::arrayref()
+    CODE:
+        AV* av = newAV();
+        av_fill(av, THIS->entities.size()-1);
+        int i = 0;
+        for (ExtrusionEntitiesPtr::iterator it = THIS->entities.begin(); it != THIS->entities.end(); ++it) {
+            SV* sv = newSV(0);
+            // return COPIES
+            if (ExtrusionPath* path = dynamic_cast<ExtrusionPath*>(*it)) {
+                sv_setref_pv( sv, "Slic3r::ExtrusionPath", new ExtrusionPath(*(ExtrusionPath*)*it) );
+            } else {
+                sv_setref_pv( sv, "Slic3r::ExtrusionLoop", new ExtrusionLoop(*(ExtrusionLoop*)*it) );
+            }
+            av_store(av, i++, sv);
+        }
+        RETVAL = newRV_noinc((SV*)av);
+    OUTPUT:
+        RETVAL
+
+void
+ExtrusionEntityCollection::append(...)
+    CODE:
+        for (unsigned int i = 1; i < items; i++) {
+            ExtrusionEntity* entity = (ExtrusionEntity *)SvIV((SV*)SvRV( ST(i) ));
+            // append COPIES
+            if (ExtrusionPath* path = dynamic_cast<ExtrusionPath*>(entity)) {
+                THIS->entities.push_back( new ExtrusionPath(*path) );
+            } else {
+                THIS->entities.push_back( new ExtrusionLoop(*(ExtrusionLoop*)entity) );
+            }
+        }
+
+bool
+ExtrusionEntityCollection::no_sort(...)
+    CODE:
+        if (items > 1) {
+            THIS->no_sort = SvTRUE(ST(1));
+        }
+        RETVAL = THIS->no_sort;
+    OUTPUT:
+        RETVAL
+
+%}
+};

xs/xsp/SurfaceCollection.xsp

@@ -19,8 +19,8 @@ SurfaceCollection::new(...)
         RETVAL->surfaces.resize(items-1);
         for (unsigned int i = 1; i < items; i++) {
             // Note: a COPY of the input is stored
-            RETVAL->surfaces[i-1] = *(Surface *)SvIV((SV*)SvRV( ST(i) ));
+            RETVAL->surfaces[i-1] = (Surface *)SvIV((SV*)SvRV( ST(i) ));
-            RETVAL->surfaces[i-1].in_collection = true;
+            RETVAL->surfaces[i-1]->in_collection = true;
         }
     OUTPUT:
         RETVAL
@@ -31,9 +31,9 @@ SurfaceCollection::arrayref()
         AV* av = newAV();
         av_fill(av, THIS->surfaces.size()-1);
         int i = 0;
-        for (Surfaces::iterator it = THIS->surfaces.begin(); it != THIS->surfaces.end(); ++it) {
+        for (SurfacesPtr::iterator it = THIS->surfaces.begin(); it != THIS->surfaces.end(); ++it) {
             SV* sv = newSV(0);
-            sv_setref_pv( sv, "Slic3r::Surface", &*it );
+            sv_setref_pv( sv, "Slic3r::Surface", *it );
             av_store(av, i++, sv);
         }
         RETVAL = newRV_noinc((SV*)av);
@@ -44,8 +44,8 @@ void
 SurfaceCollection::append(...)
     CODE:
         for (unsigned int i = 1; i < items; i++) {
-            THIS->surfaces.push_back(*(Surface *)SvIV((SV*)SvRV( ST(i) )));
+            THIS->surfaces.push_back((Surface *)SvIV((SV*)SvRV( ST(i) )));
-            THIS->surfaces.back().in_collection = true;
+            THIS->surfaces.back()->in_collection = true;
         }
 
 %}

xs/xsp/my.map

@@ -6,6 +6,7 @@ Polyline*       O_OBJECT
 Polygon*        O_OBJECT
 ExPolygon*      O_OBJECT
 ExPolygonCollection*    O_OBJECT
+ExtrusionEntityCollection*    O_OBJECT
 ExtrusionPath*  O_OBJECT
 ExtrusionLoop*  O_OBJECT
 Surface*        O_OBJECT

xs/xsp/typemap.xspt

@@ -7,6 +7,7 @@
 %typemap{ExPolygon*};
 %typemap{Polyline*};
 %typemap{Polygon*};
+%typemap{ExtrusionEntityCollection*};
 %typemap{ExtrusionPath*};
 %typemap{ExtrusionLoop*};
 %typemap{Lines};