From c64ce8777f81a32b95edeb6828e735cb76da9cff Mon Sep 17 00:00:00 2001 From: rtyr <36745189+rtyr@users.noreply.github.com> Date: Mon, 21 Jun 2021 17:12:04 +0200 Subject: [PATCH] Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements --- resources/profiles/TriLAB.idx | 2 + resources/profiles/TriLAB.ini | 978 ++++++++++++++++++++++++++++------ 2 files changed, 816 insertions(+), 164 deletions(-) diff --git a/resources/profiles/TriLAB.idx b/resources/profiles/TriLAB.idx index 65f47d59a..5809ea390 100644 --- a/resources/profiles/TriLAB.idx +++ b/resources/profiles/TriLAB.idx @@ -1,3 +1,5 @@ +min_slic3r_version = 2.3.2-alpha0 +0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements min_slic3r_version = 2.3.0-alpha3 0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation 0.0.6 Added material TPU 93A (SMARTFIL) diff --git a/resources/profiles/TriLAB.ini b/resources/profiles/TriLAB.ini index d6824bade..00e6295cc 100644 --- a/resources/profiles/TriLAB.ini +++ b/resources/profiles/TriLAB.ini @@ -6,7 +6,7 @@ name = TriLAB # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 0.0.7 +config_version = 0.0.8 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -15,23 +15,32 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. +[printer_model:AQI] +name = AzteQ Industrial +variants = 0.4; 0.6 +technology = FFF +family = AzteQ +bed_model = aq_bed.stl +bed_texture = aq_bed_texture.svg +default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa) + [printer_model:DQ2] name = DeltiQ 2 -variants = 0.4; 0.25; 0.8 +variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle; DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle +default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle [printer_model:DQ2P] name = DeltiQ 2 Plus -variants = 0.4; 0.25; 0.8 +variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle +default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle [printer_model:DQ2+FP2] name = DeltiQ 2 + FlexPrint 2 @@ -40,7 +49,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL) +default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL) [printer_model:DQ2P+FP2] name = DeltiQ 2 Plus + FlexPrint 2 @@ -49,7 +58,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL) +default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL) [printer_model:DQ2+FP] name = DeltiQ 2 + FlexPrint @@ -58,7 +67,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic; +default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic [printer_model:DQ2P+FP] name = DeltiQ 2 Plus + FlexPrint @@ -67,7 +76,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic +default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic [printer_model:DQM] name = DeltiQ M @@ -90,12 +99,11 @@ technology = FFF family = DeltiQ default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE -# All presets starting with asterisk, for example *common*, are intermediate and they will -# not make it into the user interface. +# DeltiQ print styles # [print:DeltiQ 0.20mm Normal] avoid_crossing_perimeters = 0 -bottom_fill_pattern = rectilinear +bottom_fill_pattern = monotonic bottom_solid_layers = 4 bottom_solid_min_thickness = 0.7 bridge_acceleration = 1000 @@ -105,7 +113,7 @@ bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 2000 dont_support_bridges = 0 @@ -212,7 +220,7 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:DeltiQ 0.10mm Normal] +[print:DeltiQ 0.10mm Detail] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 7 bottom_solid_min_thickness = 0.7 @@ -255,7 +263,7 @@ thin_walls = 0 inherits = DeltiQ 0.20mm Normal avoid_crossing_perimeters = 0 bridge_flow_ratio = 0.80 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4 extra_perimeters = 1 only_retract_when_crossing_perimeters = 1 extrusion_width = 0.40 @@ -288,7 +296,7 @@ inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 6 bottom_solid_min_thickness = 0.5 bridge_speed = 60 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.25 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.25 elefant_foot_compensation = 0.0 external_perimeter_extrusion_width = 0.27 extrusion_width = 0.25 @@ -314,13 +322,40 @@ inherits = DeltiQ 0.07mm Quality @0.25 nozzle first_layer_height = 0.2 layer_height = 0.2 +[print:DeltiQ 0.30mm Normal @0.6 nozzle] +inherits = DeltiQ 0.20mm Normal +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.6 +external_perimeter_extrusion_width = 0.68 +extrusion_width = 0.65 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.3 +infill_extrusion_width = 0.68 +layer_height = 0.3 +perimeter_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +support_material_contact_distance = 0.2 +support_material_extrusion_width = 0.55 +support_material_interface_spacing = 0.6 +support_material_xy_spacing = 0.9 +top_infill_extrusion_width = 0.6 + +[print:DeltiQ 0.30mm Strong @0.6 nozzle] +inherits = DeltiQ 0.30mm Normal @0.6 nozzle +fill_density = 50% +perimeters = 3 + +[print:DeltiQ 0.35mm Fast @0.6 nozzle] +inherits = DeltiQ 0.30mm Normal @0.6 nozzle +fill_density = 10% +layer_height = 0.35 + [print:DeltiQ 0.40mm Normal @0.8 nozzle] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 3 bottom_solid_min_thickness = 1.2 bridge_flow_ratio = 0.90 bridge_speed = 20 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.8 elefant_foot_compensation = 0.0 external_perimeter_extrusion_width = 0.80 external_perimeter_speed = 30 @@ -360,6 +395,181 @@ spiral_vase = 1 ensure_vertical_shell_thickness = 1 thin_walls = 0 +# AzteQ print styles # + +[print:AzteQ Industrial 0.20mm Normal] +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = monotonic +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0.7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 2000 +dont_support_bridges = 0 +draft_shield = 0 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 65 +extruder_clearance_radius = 65 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +gap_fill_speed = 40 +gcode_comments = 0 +gcode_label_objects = 0 +infill_acceleration = 2000 +infill_anchor = 600% +infill_anchor_max = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +inherits = +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.2 +max_print_speed = 60 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode +overhangs = 1 +perimeter_acceleration = 1500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 10 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +small_perimeter_speed = 20 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 30 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 4 +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 40 +support_material_with_sheath = 0 +support_material_xy_spacing = 0.6 +thin_walls = 0 +threads = 12 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +top_solid_layers = 5 +top_solid_min_thickness = 0.7 +travel_speed = 200 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:AzteQ Industrial 0.15mm Detail] +inherits = AzteQ Industrial 0.20mm Normal +layer_height = 0.15 + +[print:AzteQ Industrial 0.20mm Strong] +inherits = AzteQ Industrial 0.20mm Normal +fill_density = 50% +perimeters = 3 + +[print:AzteQ Industrial 0.20mm Vase] +inherits = AzteQ Industrial 0.20mm Normal +ensure_vertical_shell_thickness = 1 +fill_density = 0% +perimeters = 1 +spiral_vase = 1 +top_solid_layers = 0 + +[print:AzteQ Industrial 0.25mm Fast] +inherits = AzteQ Industrial 0.20mm Normal +fill_density = 10% +layer_height = 0.25 + +[print:AzteQ Industrial 0.30mm Normal @0.6 nozzle] +inherits = AzteQ Industrial 0.20mm Normal +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +external_perimeter_extrusion_width = 0.68 +extrusion_width = 0.65 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.3 +infill_extrusion_width = 0.68 +layer_height = 0.3 +perimeter_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +support_material_contact_distance = 0.2 +support_material_extrusion_width = 0.55 +support_material_interface_spacing = 0.6 +support_material_xy_spacing = 0.9 +top_infill_extrusion_width = 0.6 + +[print:AzteQ Industrial 0.30mm Strong @0.6 nozzle] +inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle +fill_density = 50% +perimeters = 3 + +[print:AzteQ Industrial 0.35mm Fast @0.6 nozzle] +inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle +fill_density = 10% +layer_height = 0.35 + +# DeltiQ filaments # [filament:*DeltiQ common*] compatible_printers = @@ -376,9 +586,9 @@ filament_soluble = 0 filament_toolchange_delay = 0 start_filament_gcode = "; FILAMENT_START_GCODE" end_filament_gcode = "; FILAMENT_END_GCODE" +filament_vendor = Generic - -# DeltiQ Filaments # +# DeltiQ PLA filaments # [filament:DeltiQ - PLA - Generic] inherits = *DeltiQ common* @@ -387,8 +597,7 @@ bridge_fan_speed = 100 cooling = 1 fan_always_on = 1 fan_below_layer_time = 100 -filament_vendor = Fillamentum -filament_cost = 767 +filament_cost = 750 filament_density = 1.24 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 @@ -407,6 +616,54 @@ min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 215 +[filament:DeltiQ - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ - PLA - Generic +filament_cost = 750 +filament_density = 1.24 +filament_vendor = Fillamentum + +[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle] +inherits = DeltiQ - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 + +[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = DeltiQ - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle] +inherits = DeltiQ - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +disable_fan_first_layers = 1 +filament_max_volumetric_speed = 40 +first_layer_temperature = 230 +slowdown_below_layer_time = 8 +temperature = 230 +filament_retract_layer_change = 0 +filament_retract_length = 4.1 +filament_retract_speed = 45 +filament_deretract_speed = 25 + +[filament:DeltiQ FP - PLA - Generic] +inherits = DeltiQ - PLA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 28 + +[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - PLA - Generic + +[filament:DeltiQ FP2 - PLA - Generic] +inherits = DeltiQ FP - PLA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 1.2 +filament_retract_speed = 28 + +[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP2 - PLA - Generic + +# DeltiQ PETG filaments # + [filament:DeltiQ - PETG - Generic] inherits = *DeltiQ common* bed_temperature = 80 @@ -414,7 +671,6 @@ bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = DevilDesign filament_cost = 480 filament_density = 1.27 filament_deretract_speed = 25 @@ -435,6 +691,61 @@ min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 245 +[filament:DeltiQ - PETG (Devil Design)] +inherits = DeltiQ - PETG - Generic +filament_cost = 480 +filament_density = 1.27 +filament_vendor = DevilDesign + +[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle] +inherits = DeltiQ - PETG (Devil Design) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 +first_layer_temperature = 225 +temperature = 220 +max_fan_speed = 65 +min_fan_speed = 40 +bridge_fan_speed = 100 + +[filament:DeltiQ - PETG (Devil Design) @0.6 nozzle] +inherits = DeltiQ - PETG (Devil Design) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle] +inherits = DeltiQ - PETG (Devil Design) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +filament_max_volumetric_speed = 40 +first_layer_temperature = 240 +slowdown_below_layer_time = 8 +temperature = 240 +filament_retract_layer_change = 0 +filament_retract_length = 4.3 +filament_retract_speed = 45 +filament_deretract_speed = 25 +filament_retract_before_wipe = 80% +filament_wipe = 1 + +[filament:DeltiQ FP - PETG - Generic] +inherits = DeltiQ - PETG - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP - PETG (Devil Design)] +inherits = DeltiQ FP - PETG - Generic + +[filament:DeltiQ FP2 - PETG - Generic] +inherits = DeltiQ FP - PETG - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 1.4 +filament_retract_speed = 35 +filament_retract_before_wipe = 0% + +[filament:DeltiQ FP2 - PETG (Devil Design)] +inherits = DeltiQ FP2 - PETG - Generic + +# DeltiQ ABS filaments # + [filament:DeltiQ - ABS - Generic] inherits = *DeltiQ common* bed_temperature = 100 @@ -442,9 +753,8 @@ bridge_fan_speed = 25 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = Fillamentum -filament_cost = 774 -filament_density = 1.08 +filament_cost = 639 +filament_density = 1.04 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% @@ -462,23 +772,95 @@ min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 255 -[filament:DeltiQ - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ - PLA - Generic - -[filament:DeltiQ - PETG (Devil Design)] -inherits = DeltiQ - PETG - Generic - [filament:DeltiQ - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic +filament_cost = 639 +filament_density = 1.04 +filament_vendor = Fillamentum + +[filament:DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = DeltiQ - ABS - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:DeltiQ FP - ABS - Generic] +inherits = DeltiQ - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - ABS - Generic + +[filament:DeltiQ FP2 - ABS - Generic] +inherits = DeltiQ FP - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.8 +filament_retract_speed = 25 + +[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] +inherits = DeltiQ FP2 - ABS - Generic + +# DeltiQ ASA filaments # [filament:DeltiQ - ASA - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic +filament_cost = 739 filament_density = 1.07 filament_type = ASA filament_vendor = Fillamentum first_layer_temperature = 265 temperature = 265 +[filament:DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = DeltiQ - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)] +inherits = DeltiQ - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 + +[filament:DeltiQ - ASA - ASA 275 (Spectrum)] +inherits = *DeltiQ common* +bed_temperature = 55 +bridge_fan_speed = 80 +cooling = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Spectrum +filament_cost = 587 +filament_density = 1.07 +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.3 +filament_retract_speed = 25 +filament_type = ASA +filament_wipe = 1 +first_layer_bed_temperature = 55 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 15 +temperature = 230 + +[filament:DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle] +inherits = DeltiQ - ASA - ASA 275 (Spectrum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +# DeltiQ CPE filaments # + [filament:DeltiQ - CPE - HG100 (Fillamentum)] inherits = *DeltiQ common* bed_temperature = 90 @@ -487,7 +869,7 @@ cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum -filament_cost = 1214 +filament_cost = 1003 filament_density = 1.25 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 @@ -507,66 +889,28 @@ min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 260 -[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle] -inherits = DeltiQ - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 +[filament:DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle] +inherits = DeltiQ - CPE - HG100 (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 -[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle] -inherits = DeltiQ - PETG (Devil Design) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 -first_layer_temperature = 225 -temperature = 220 -max_fan_speed = 65 -min_fan_speed = 40 -bridge_fan_speed = 100 - -[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle] -inherits = DeltiQ - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 -disable_fan_first_layers = 1 -filament_max_volumetric_speed = 40 -first_layer_temperature = 230 -slowdown_below_layer_time = 8 -temperature = 230 -filament_retract_layer_change = 0 -filament_retract_length = 4.1 -filament_retract_speed = 45 -filament_deretract_speed = 25 - -[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle] -inherits = DeltiQ - PETG (Devil Design) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 -filament_max_volumetric_speed = 40 -first_layer_temperature = 240 -slowdown_below_layer_time = 8 -temperature = 240 -filament_retract_layer_change = 0 -filament_retract_length = 4.3 -filament_retract_speed = 45 -filament_deretract_speed = 25 -filament_retract_before_wipe = 80% -filament_wipe = 1 - - -# DeltiQ FlexPrint Filaments # - -[filament:DeltiQ FP - PLA - Generic] -inherits = DeltiQ - PLA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.7 -filament_retract_speed = 28 - -[filament:DeltiQ FP - PETG - Generic] -inherits = DeltiQ - PETG - Generic +[filament:DeltiQ FP - CPE - HG100 (Fillamentum)] +inherits = DeltiQ - CPE - HG100 (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 25 +filament_deretract_speed = 0 +filament_retract_before_wipe = 0% -[filament:DeltiQ FP - ABS - Generic] -inherits = DeltiQ - ABS - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.7 -filament_retract_speed = 25 +[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)] +inherits = DeltiQ FP - CPE - HG100 (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.8 +filament_retract_speed = 35 +filament_deretract_speed = 0 +filament_retract_before_wipe = 0% + +# DeltiQ FLEX filaments # [filament:DeltiQ FP - FLEX - Generic] inherits = *DeltiQ common* @@ -600,72 +944,6 @@ min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 240 -[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - PLA - Generic - -[filament:DeltiQ FP - PETG (Devil Design)] -inherits = DeltiQ FP - PETG - Generic - -[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - ABS - Generic - -[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)] -inherits = DeltiQ - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.7 -filament_retract_speed = 25 - -[filament:DeltiQ FP - CPE - HG100 (Fillamentum)] -inherits = DeltiQ - CPE - HG100 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.7 -filament_retract_speed = 25 -filament_deretract_speed = 0 -filament_retract_before_wipe = 0% - - -# DeltiQ FlexPrint 2 Filaments # - -[filament:DeltiQ FP2 - PLA - Generic] -inherits = DeltiQ FP - PLA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 1.2 -filament_retract_speed = 28 - -[filament:DeltiQ FP2 - PETG - Generic] -inherits = DeltiQ FP - PETG - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 1.4 -filament_retract_speed = 35 -filament_retract_before_wipe = 0% - -[filament:DeltiQ FP2 - ABS - Generic] -inherits = DeltiQ FP - ABS - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.8 -filament_retract_speed = 25 - -[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP2 - PLA - Generic - -[filament:DeltiQ FP2 - PETG (Devil Design)] -inherits = DeltiQ FP2 - PETG - Generic - -[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] -inherits = DeltiQ FP2 - ABS - Generic - -[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 - -[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)] -inherits = DeltiQ FP - CPE - HG100 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.8 -filament_retract_speed = 35 -filament_deretract_speed = 0 -filament_retract_before_wipe = 0% - [filament:DeltiQ FP2 - FLEX - Generic] inherits = DeltiQ FP - FLEX - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 @@ -772,6 +1050,322 @@ min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 235 +# AzteQ filaments # + +[filament:*AzteQ common*] +inherits = *DeltiQ common* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 + +# AzteQ Industrial filaments # + +[filament:AzteQ Industrial (Door Opened) - PLA - Generic] +inherits = *AzteQ common* +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 750 +filament_density = 1.24 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_vendor = Generic +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 215 +full_fan_speed_layer = 0 +max_fan_speed = 100 +min_fan_speed = 90 +min_print_speed = 10 +slowdown_below_layer_time = 15 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" +temperature = 210 + +[filament:AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle] +inherits = AzteQ Industrial (Door Opened) - PLA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)] +inherits = AzteQ Industrial (Door Opened) - PLA - Generic +filament_vendor = Fillamentum +filament_cost = 750 +filament_density = 1.24 + +[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)] +inherits = *AzteQ common* +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 750 +filament_density = 1.24 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 6 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_vendor = Fillamentum +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 220 +full_fan_speed_layer = 0 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" +temperature = 215 + +[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ABS - Generic] +inherits = *AzteQ common* +bed_temperature = 100 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 639 +filament_density = 1.04 +filament_deretract_speed = nil +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_type = ABS +filament_vendor = Generic +filament_wipe = 1 +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +full_fan_speed_layer = 0 +max_fan_speed = 100 +min_fan_speed = 80 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +temperature = 255 + +[filament:AzteQ Industrial - ABS - Generic @0.6 nozzle] +inherits = AzteQ Industrial - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)] +inherits = AzteQ Industrial - ABS - Generic +filament_vendor = Fillamentum +filament_cost = 639 +filament_density = 1.04 + +[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ASA - Generic] +inherits = *AzteQ common* +bed_temperature = 100 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 739 +filament_density = 1.07 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_type = ASA +filament_vendor = Generic +filament_wipe = 1 +first_layer_bed_temperature = 100 +first_layer_temperature = 265 +full_fan_speed_layer = 0 +max_fan_speed = 75 +min_fan_speed = 50 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +temperature = 265 + +[filament:AzteQ Industrial - ASA - Generic @0.6 nozzle] +inherits = AzteQ Industrial - ASA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum)] +inherits = AzteQ Industrial - ASA - Generic +filament_vendor = Fillamentum + +[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle] +inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ASA - Prusament (Prusa)] +inherits = AzteQ Industrial - ASA - Generic +filament_cost = 680 +filament_density = 1.07 +filament_spool_weight = 0 +filament_vendor = Prusa +first_layer_temperature = 255 +max_fan_speed = 100 +min_fan_speed = 95 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +temperature = 255 + +[filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.6 nozzle] +inherits = AzteQ Industrial - ASA - Prusament (Prusa) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)] +inherits = *AzteQ common* +bed_temperature = 100 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 1212 +filament_density = 1.02 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = NYLON +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Fiberlogy +filament_wipe = 1 +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +full_fan_speed_layer = 0 +max_fan_speed = 75 +min_fan_speed = 50 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +temperature = 255 + +[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle] +inherits = AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - PC Blend - Prusament (Prusa)] +inherits = *AzteQ common* +bed_temperature = 100 +bridge_fan_speed = 75 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_cost = 1156 +filament_density = 1.22 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 25 +filament_soluble = 0 +filament_spool_weight = 0 +filament_type = PC +filament_vendor = Prusa +filament_wipe = 1 +first_layer_bed_temperature = 100 +first_layer_temperature = 275 +full_fan_speed_layer = 0 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +temperature = 275 + +[filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.6 nozzle] +inherits = AzteQ Industrial - PC Blend - Prusament (Prusa) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_max_volumetric_speed = 15 # DeltiQ Printer # @@ -792,7 +1386,7 @@ extruder_offset = 0x0 gcode_flavor = repetier layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n max_layer_height = 0.25 -max_print_height = 320 +max_print_height = 300 min_layer_height = 0.15 nozzle_diameter = 0.4 parking_pos_retraction = 92 @@ -809,7 +1403,7 @@ retract_length = 4.0 retract_length_toolchange = 10 retract_lift = 0.2 retract_lift_above = 0 -retract_lift_below = 319 +retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 @@ -830,7 +1424,7 @@ inherits = *DeltiQ* printer_model = DQL printer_variant = 0.4 bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 -max_print_height = 320 +max_print_height = 300 [printer:DeltiQ M] inherits = *DeltiQ* @@ -856,7 +1450,7 @@ retract_speed = 35 inherits = *DeltiQ* before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors -gcode_flavor = reprap +gcode_flavor = reprapfirmware layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] pause_print_gcode = M0 start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder @@ -866,7 +1460,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in inherits = *DeltiQ 2* printer_model = DQ2 printer_variant = 0.4 -max_print_height = 320 +max_print_height = 300 [printer:DeltiQ 2 - 0.25 nozzle] inherits = DeltiQ 2 @@ -877,11 +1471,20 @@ nozzle_diameter = 0.25 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle +[printer:DeltiQ 2 - 0.6 nozzle] +inherits = DeltiQ 2 +printer_variant = 0.6 +max_layer_height = 0.4 +min_layer_height = 0.2 +nozzle_diameter = 0.6 +default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" +default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle + [printer:DeltiQ 2 - 0.8 nozzle] inherits = DeltiQ 2 printer_variant = 0.8 -max_layer_height = 0.4 -min_layer_height = 0.4 +max_layer_height = 0.6 +min_layer_height = 0.3 nozzle_diameter = 0.8 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle @@ -901,11 +1504,20 @@ nozzle_diameter = 0.25 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle +[printer:DeltiQ 2 Plus - 0.6 nozzle] +inherits = DeltiQ 2 Plus +printer_variant = 0.6 +max_layer_height = 0.4 +min_layer_height = 0.2 +nozzle_diameter = 0.6 +default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" +default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle + [printer:DeltiQ 2 Plus - 0.8 nozzle] inherits = DeltiQ 2 Plus printer_variant = 0.8 -max_layer_height = 0.4 -min_layer_height = 0.4 +max_layer_height = 0.6 +min_layer_height = 0.3 nozzle_diameter = 0.8 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle @@ -923,7 +1535,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in inherits = *DeltiQ 2 FlexPrint* printer_model = DQ2+FP printer_variant = 0.4 -max_print_height = 320 +max_print_height = 300 [printer:DeltiQ 2 Plus + FlexPrint] inherits = *DeltiQ 2 FlexPrint* @@ -942,7 +1554,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in inherits = *DeltiQ 2 FlexPrint 2* printer_model = DQ2+FP2 printer_variant = 0.4 -max_print_height = 320 +max_print_height = 300 [printer:DeltiQ 2 Plus + FlexPrint 2] inherits = *DeltiQ 2 FlexPrint 2* @@ -950,6 +1562,44 @@ printer_model = DQ2P+FP2 printer_variant = 0.4 max_print_height = 500 +[printer:*AzteQ*] +inherits = *DeltiQ 2* +max_print_height = 400 +bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14 +before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n +end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed heater\nM141 S0 ; Turn off chamber heater\nM104 S0 ; Turn off hotend heater\n\nG28 ; Home all axes\n\nM107 ; Turn off layer fan\n\nG90 ; Absolute positioning for motion\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5 ; Disable motor hold +layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQI +retract_before_travel = 3 +retract_before_wipe = 100% +retract_layer_change = 1 +retract_length = 4 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nM140 S[first_layer_bed_temperature] ; Set and continue - bed temperature\n[start_filament_gcode]\nM104 S150 ; Set and continue - hotend probing temperature\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM109 S150 ; Set and wait - hotend probing temperature\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set and continue - printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder +wipe = 1 + +[printer:AzteQ Industrial] +inherits = *AzteQ* +printer_model = AQI +printer_variant = 0.4 +max_print_height = 400 +default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)" +default_print_profile = AzteQ Industrial 0.30mm Normal + +[printer:AzteQ Industrial - 0.6 nozzle] +inherits = AzteQ Industrial +printer_variant = 0.6 +max_layer_height = 0.4 +min_layer_height = 0.2 +nozzle_diameter = 0.6 +default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle" +default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle [presets] print = DeltiQ 0.20mm Normal