3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Replaced parameters wall_add_middle_threshold and wall_split_middle_threshold with automatic computation based on extrusion width.

Browse source 
That allows computed better values in cases when the extrusion width of the first layer or for the infill differs from the extrusion width for perimeters.

Parameters min_feature_size and wall_transition_length now can be set in percentages, and then they will be calculated based on nozzle size. Old profiles with default values are forced to replace old default values with new default values in percentages.
This commit is contained in:
Lukáš Hejl 2022-08-05 08:16:45 +02:00
parent b8c3905e82
commit c9ddf7315e
14 changed files with 70 additions and 72 deletions
src/libslic3r
PrintConfig.cpp

50
src/libslic3r/PrintConfig.cpp
View file

@ -3076,15 +3076,16 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<PerimeterGeneratorType>(PerimeterGeneratorType::Arachne));
def = this->add("wall_transition_length", coFloat);
def = this->add("wall_transition_length", coFloatOrPercent);
def->label = L("Perimeter transition length");
def->category = L("Advanced");
def->tooltip = L("When transitioning between different numbers of perimeters as the part becomes "
"thinner, a certain amount of space is allotted to split or join the perimeter segments.");
def->sidetext = L("mm");
"thinner, a certain amount of space is allotted to split or join the perimeter segments. "
"If expressed as a percentage (for example 100%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.4));
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("wall_transition_filter_deviation", coFloatOrPercent);
def->label = L("Perimeter transitioning filter margin");
@ -3123,46 +3124,17 @@ void PrintConfigDef::init_fff_params()
def->min = 1;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("wall_split_middle_threshold", coPercent);
def->label = L("Split middle perimeter threshold");
def->category = L("Advanced");
def->tooltip = L("The smallest extrusion width, as a factor of the normal extrusion width, above which the middle "
"perimeter (if there is one) will be split into two. Reduce this setting to use more, thinner "
"perimeters. Increase to use fewer, wider perimeters. Note that this applies -as if- the entire "
"shape should be filled with perimeter, so the middle here refers to the middle of the object "
"between two outer edges of the shape, even if there actually is infill or other extrusion types in "
"the print instead of the perimeter.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 1;
def->max = 99;
def->set_default_value(new ConfigOptionPercent(50));
def = this->add("wall_add_middle_threshold", coPercent);
def->label = L("Add middle perimeter threshold");
def->category = L("Advanced");
def->tooltip = L("The smallest extrusion width, as a factor of the normal extrusion width, above which a middle "
"perimeter (if there wasn't one already) will be added. Reduce this setting to use more, "
"thinner perimeters. Increase to use fewer, wider perimeters. Note that this applies -as if- the "
"entire shape should be filled with perimeter, so the middle here refers to the middle of the "
"object between two outer edges of the shape, even if there actually is infill or other "
"extrusion types in the print instead of the perimeter.");
def->sidetext = L("%");
def->mode = comAdvanced;
def->min = 1;
def->max = 99;
def->set_default_value(new ConfigOptionPercent(75));
def = this->add("min_feature_size", coFloat);
def = this->add("min_feature_size", coFloatOrPercent);
def->label = L("Minimum feature size");
def->category = L("Advanced");
def->tooltip = L("Minimum thickness of thin features. Model features that are thinner than this value will "
"not be printed, while features thicker than the Minimum feature size will be widened to "
"the Minimum perimeter width.");
def->sidetext = L("mm");
"the Minimum perimeter width. "
"If expressed as a percentage (for example 25%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.1));
def->set_default_value(new ConfigOptionFloatOrPercent(25, true));
def = this->add("min_bead_width", coFloatOrPercent);
def->label = L("Minimum perimeter width");
@ -4012,6 +3984,8 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
"serial_port", "serial_speed",
// Introduced in some PrusaSlicer 2.3.1 alpha, later renamed or removed.
"fuzzy_skin_perimeter_mode", "fuzzy_skin_shape",
// Introduced in PrusaSlicer 2.3.0-alpha2, later replaced by automatic calculation based on extrusion width.
"wall_add_middle_threshold", "wall_split_middle_threshold",
};
// In PrusaSlicer 2.3.0-alpha0 the "monotonous" infill was introduced, which was later renamed to "monotonic".