From cc14676ca5cc90203892735ee31ddaa1b50adc03 Mon Sep 17 00:00:00 2001 From: bubnikv Date: Thu, 6 Dec 2018 08:57:31 +0100 Subject: [PATCH] Removed slic3r.pl, updated Build.PL with a notice, that the Perl bindings are optional, not required to run Slic3r. --- Build.PL | 5 + slic3r.pl | 557 ------------------------------------------------------ 2 files changed, 5 insertions(+), 557 deletions(-) delete mode 100755 slic3r.pl diff --git a/Build.PL b/Build.PL index 98920731c..3f1cf2633 100644 --- a/Build.PL +++ b/Build.PL @@ -1,5 +1,10 @@ #!/usr/bin/perl +print "This script is currently used for installing Perl dependenices for running\n"; +print "the libslic3r unit / integration tests through Perl prove.\n"; +print "If you don't plan to run the unit / integration tests, you don't need to\n"; +print "install these dependencies to build and run Slic3r.\n"; + use strict; use warnings; diff --git a/slic3r.pl b/slic3r.pl deleted file mode 100755 index 95427443b..000000000 --- a/slic3r.pl +++ /dev/null @@ -1,557 +0,0 @@ -#!/usr/bin/env perl - -use strict; -use warnings; - -BEGIN { - use FindBin; - use lib "$FindBin::Bin/lib"; - use local::lib '--no-create', "$FindBin::Bin/local-lib"; -} - -use File::Basename qw(basename); -use Getopt::Long qw(:config no_auto_abbrev); -use List::Util qw(first); -#use POSIX qw(setlocale LC_NUMERIC); -use Slic3r; -use Slic3r::Geometry qw(deg2rad); -use Time::HiRes qw(gettimeofday tv_interval); -$|++; -binmode STDOUT, ':utf8'; - -# Convert all parameters from the local code page to utf8 on Windows. -@ARGV = map Slic3r::decode_path($_), @ARGV if $^O eq 'MSWin32'; - -our %opt = (); -my %cli_options = (); -{ - my %options = ( - 'help' => sub { usage() }, - 'version' => sub { print "$Slic3r::VERSION\n"; exit 0 }, - - 'debug' => \$Slic3r::debug, - 'gui' => \$opt{gui}, - 'no-gui' => \$opt{no_gui}, - 'o|output=s' => \$opt{output}, - - 'save=s' => \$opt{save}, - 'load=s@' => \$opt{load}, - 'autosave=s' => \$opt{autosave}, - 'ignore-nonexistent-config' => \$opt{ignore_nonexistent_config}, - 'no-plater' => \$opt{no_plater}, - 'gui-mode=s' => \$opt{obsolete_ignore_this_option_gui_mode}, - 'datadir=s' => \$opt{datadir}, - 'export-png' => \$opt{export_png}, - 'merge|m' => \$opt{merge}, - 'repair' => \$opt{repair}, - 'cut=f' => \$opt{cut}, - 'split' => \$opt{split}, - 'info' => \$opt{info}, - - 'scale=f' => \$opt{scale}, - 'rotate=f' => \$opt{rotate}, - 'duplicate=i' => \$opt{duplicate}, - 'duplicate-grid=s' => \$opt{duplicate_grid}, - 'print-center=s' => \$opt{print_center}, - 'dont-arrange' => \$opt{dont_arrange}, - ); - foreach my $opt_key (keys %{$Slic3r::Config::Options}) { - my $cli = $Slic3r::Config::Options->{$opt_key}->{cli} or next; - # allow both the dash-separated option name and the full opt_key - $options{ "$opt_key|$cli" } = \$cli_options{$opt_key}; - } - - @ARGV = grep !/^-psn_\d/, @ARGV if $^O eq 'darwin'; - GetOptions(%options) or usage(1); -} - -# load configuration files -my @external_configs = (); -if ($opt{load}) { - foreach my $configfile (@{$opt{load}}) { - if (-e $configfile) { - push @external_configs, Slic3r::Config::load($configfile); - } elsif (-e "$FindBin::Bin/$configfile") { - printf STDERR "Loading $FindBin::Bin/$configfile\n"; - push @external_configs, Slic3r::Config::load("$FindBin::Bin/$configfile"); - } else { - $opt{ignore_nonexistent_config} or die "Cannot find specified configuration file ($configfile).\n"; - } - } -} - -# process command line options -my $cli_config = Slic3r::Config->new; -foreach my $c (@external_configs, Slic3r::Config->new_from_cli(%cli_options)) { - $c->normalize; # expand shortcuts before applying, otherwise destination values would be already filled with defaults - $cli_config->apply($c); -} - -# save configuration -if ($opt{save}) { - if (@{$cli_config->get_keys} > 0) { - $cli_config->save($opt{save}); - } else { - Slic3r::Config::new_from_defaults->save($opt{save}); - } -} - -# apply command line config on top of default config -my $config = Slic3r::Config::new_from_defaults; -$config->apply($cli_config); - -# launch GUI -my $gui; -if ((!@ARGV || $opt{gui}) && !$opt{no_gui} && !$opt{save} && eval "require Slic3r::GUI; 1") { - { - no warnings 'once'; - $Slic3r::GUI::datadir = Slic3r::decode_path($opt{datadir} // ''); - $Slic3r::GUI::no_plater = $opt{no_plater}; - $Slic3r::GUI::autosave = $opt{autosave}; - } - Slic3r::GUI::set_gui_appctl(); - $gui = Slic3r::GUI->new; - #setlocale(LC_NUMERIC, 'C'); - $gui->{mainframe}->load_config_file($_) for @{$opt{load}}; - $gui->{mainframe}->load_config($cli_config); - my @input_files = @ARGV; - $gui->{mainframe}{plater}->load_files(\@input_files) unless $opt{no_plater}; - $gui->MainLoop; - exit; -} -die $@ if $@ && $opt{gui}; - -if (@ARGV) { # slicing from command line - Slic3r::GUI::set_cli_appctl(); - my $appctl = Slic3r::AppController->new(); - - $config->validate; - - if ($opt{repair}) { - foreach my $file (@ARGV) { - die "Repair is currently supported only on STL files\n" - if $file !~ /\.[sS][tT][lL]$/; - - my $output_file = $file; - $output_file =~ s/\.([sS][tT][lL])$/_fixed.obj/; - my $tmesh = Slic3r::TriangleMesh->new; - $tmesh->ReadSTLFile($file); - $tmesh->repair; - $tmesh->WriteOBJFile($output_file); - } - exit; - } - - if ($opt{cut}) { - foreach my $file (@ARGV) { - my $model = Slic3r::Model->read_from_file($file); - my $mesh = $model->mesh; - $mesh->translate(0, 0, -$mesh->bounding_box->z_min); - my $upper = Slic3r::TriangleMesh->new; - my $lower = Slic3r::TriangleMesh->new; - $mesh->cut($opt{cut}, $upper, $lower); - $upper->repair; - $lower->repair; - $upper->write_ascii("${file}_upper.stl") - if $upper->facets_count > 0; - $lower->write_ascii("${file}_lower.stl") - if $lower->facets_count > 0; - } - exit; - } - - if ($opt{split}) { - foreach my $file (@ARGV) { - my $model = Slic3r::Model->read_from_file($file); - my $mesh = $model->mesh; - $mesh->repair; - - my $part_count = 0; - foreach my $new_mesh (@{$mesh->split}) { - my $output_file = sprintf '%s_%02d.stl', $file, ++$part_count; - printf "Writing to %s\n", basename($output_file); - $new_mesh->write_binary($output_file); - } - } - exit; - } - - while (my $input_file = shift @ARGV) { - my $model; - if ($opt{merge}) { - my @models = map Slic3r::Model->read_from_file($_), $input_file, (splice @ARGV, 0); - $model = Slic3r::Model->merge(@models); - } else { - $model = Slic3r::Model->read_from_file($input_file); - } - - if ($opt{info}) { - $model->print_info; - next; - } - - if (defined $opt{duplicate_grid}) { - $opt{duplicate_grid} = [ split /[,x]/, $opt{duplicate_grid}, 2 ]; - } - if (defined $opt{print_center}) { - $opt{print_center} = Slic3r::Pointf->new(split /[,x]/, $opt{print_center}, 2); - } - - my $sprint = Slic3r::Print::Simple->new( - scale => $opt{scale} // 1, - rotate => deg2rad($opt{rotate} // 0), - duplicate => $opt{duplicate} // 1, - duplicate_grid => $opt{duplicate_grid} // [1,1], - print_center => $opt{print_center} // Slic3r::Pointf->new(100,100), - dont_arrange => $opt{dont_arrange} // 0, - output_file => $opt{output}, - ); - - # This is delegated to C++ PrintObject::apply_config(). - $sprint->apply_config($config); - $sprint->set_model($model); - # Do the apply_config once again to validate the layer height profiles at all the newly added PrintObjects. - $sprint->apply_config($config); - - if ($opt{export_png}) { - # $sprint->export_png; - $appctl->set_model($model); - $appctl->set_print($sprint->_print); - $appctl->print_ctl()->slice_to_png(); - } else { - my $t0 = [gettimeofday]; - # The following call may die if the output_filename_format template substitution fails, - # if the file cannot be written into, or if the post processing scripts cannot be executed. - $sprint->export_gcode; - - # output some statistics - { - my $duration = tv_interval($t0); - printf "Done. Process took %d minutes and %.3f seconds\n", - int($duration/60), ($duration - int($duration/60)*60); # % truncates to integer - } - printf "Filament required: %.1fmm (%.1fcm3)\n", - $sprint->total_used_filament, $sprint->total_extruded_volume/1000; - } - } -} else { - usage(1) unless $opt{save}; -} - -sub usage { - my ($exit_code) = @_; - my $config = Slic3r::Config::new_from_defaults->as_hash; - print <<"EOF"; -Slic3r $Slic3r::VERSION is a STL-to-GCODE translator for RepRap 3D printers -written by Alessandro Ranellucci - http://slic3r.org/ - -Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ... - - --help Output this usage screen and exit - --version Output the version of Slic3r and exit - --save Save configuration to the specified file - --load Load configuration from the specified file. It can be used - more than once to load options from multiple files. - -o, --output File to output gcode to (by default, the file will be saved - into the same directory as the input file using the - --output-filename-format to generate the filename.) If a - directory is specified for this option, the output will - be saved under that directory, and the filename will be - generated by --output-filename-format. - - Non-slicing actions (no G-code will be generated): - --repair Repair given STL files and save them as _fixed.obj - --cut Cut given input files at given Z (relative) and export - them as _upper.stl and _lower.stl - --split Split the shells contained in given STL file into several STL files - --info Output information about the supplied file(s) and exit - -j, --threads Number of threads to use (1+, default: $config->{threads}) - - GUI options: - --gui Forces the GUI launch instead of command line slicing (if you - supply a model file, it will be loaded into the plater) - --no-plater Disable the plater tab - --no-gui Forces the command line slicing instead of gui. - This takes precedence over --gui if both are present. - --autosave Automatically export current configuration to the specified file - - Output options: - --output-filename-format - Output file name format; all config options enclosed in brackets - will be replaced by their values, as well as [input_filename_base] - and [input_filename] (default: $config->{output_filename_format}) - --post-process Generated G-code will be processed with the supplied script; - call this more than once to process through multiple scripts. - --export-png Export zipped PNG files containing slices instead of G-code. - -m, --merge If multiple files are supplied, they will be composed into a single - print rather than processed individually. - - Printer options: - --nozzle-diameter Diameter of nozzle in mm (default: $config->{nozzle_diameter}->[0]) - --print-center Coordinates in mm of the point to center the print around - (default: 100,100) - --z-offset Additional height in mm to add to vertical coordinates - (+/-, default: $config->{z_offset}) - --gcode-flavor The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion, - default: $config->{gcode_flavor}) - --use-relative-e-distances Enable this to get relative E values (default: no) - --use-firmware-retraction Enable firmware-controlled retraction using G10/G11 (default: no) - --use-volumetric-e Express E in cubic millimeters and prepend M200 (default: no) - --set-and-wait-temperatures Use M190 instead of M140 for temperature changes past the first (default: no) - --gcode-comments Make G-code verbose by adding comments (default: no) - - Filament options: - --filament-diameter Diameter in mm of your raw filament (default: $config->{filament_diameter}->[0]) - --extrusion-multiplier - Change this to alter the amount of plastic extruded. There should be - very little need to change this value, which is only useful to - compensate for filament packing (default: $config->{extrusion_multiplier}->[0]) - --temperature Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0]) - --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius, - set 0 to disable (default: same as --temperature) - --bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}[0]) - --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius, - set 0 to disable (default: same as --bed-temperature) - - Speed options: - --travel-speed Speed of non-print moves in mm/s (default: $config->{travel_speed}) - --perimeter-speed Speed of print moves for perimeters in mm/s (default: $config->{perimeter_speed}) - --small-perimeter-speed - Speed of print moves for small perimeters in mm/s or % over perimeter speed - (default: $config->{small_perimeter_speed}) - --external-perimeter-speed - Speed of print moves for the external perimeter in mm/s or % over perimeter speed - (default: $config->{external_perimeter_speed}) - --infill-speed Speed of print moves in mm/s (default: $config->{infill_speed}) - --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed - (default: $config->{solid_infill_speed}) - --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed - (default: $config->{top_solid_infill_speed}) - --support-material-speed - Speed of support material print moves in mm/s (default: $config->{support_material_speed}) - --support-material-interface-speed - Speed of support material interface print moves in mm/s or % over support material - speed (default: $config->{support_material_interface_speed}) - --bridge-speed Speed of bridge print moves in mm/s (default: $config->{bridge_speed}) - --gap-fill-speed Speed of gap fill print moves in mm/s (default: $config->{gap_fill_speed}) - --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute - value or as a percentage over normal speeds (default: $config->{first_layer_speed}) - - Acceleration options: - --perimeter-acceleration - Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero - to disable; default: $config->{perimeter_acceleration}) - --infill-acceleration - Overrides firmware's default acceleration for infill. (mm/s^2, set zero - to disable; default: $config->{infill_acceleration}) - --bridge-acceleration - Overrides firmware's default acceleration for bridges. (mm/s^2, set zero - to disable; default: $config->{bridge_acceleration}) - --first-layer-acceleration - Overrides firmware's default acceleration for first layer. (mm/s^2, set zero - to disable; default: $config->{first_layer_acceleration}) - --default-acceleration - Acceleration will be reset to this value after the specific settings above - have been applied. (mm/s^2, set zero to disable; default: $config->{default_acceleration}) - - Accuracy options: - --layer-height Layer height in mm (default: $config->{layer_height}) - --first-layer-height Layer height for first layer (mm or %, default: $config->{first_layer_height}) - --infill-every-layers - Infill every N layers (default: $config->{infill_every_layers}) - --solid-infill-every-layers - Force a solid layer every N layers (default: $config->{solid_infill_every_layers}) - - Print options: - --perimeters Number of perimeters/horizontal skins (range: 0+, default: $config->{perimeters}) - --top-solid-layers Number of solid layers to do for top surfaces (range: 0+, default: $config->{top_solid_layers}) - --bottom-solid-layers Number of solid layers to do for bottom surfaces (range: 0+, default: $config->{bottom_solid_layers}) - --solid-layers Shortcut for setting the two options above at once - --fill-density Infill density (range: 0%-100%, default: $config->{fill_density}%) - --fill-angle Infill angle in degrees (range: 0-90, default: $config->{fill_angle}) - --fill-pattern Pattern to use to fill non-solid layers (default: $config->{fill_pattern}) - --external-fill-pattern Pattern to use to fill solid layers (default: $config->{external_fill_pattern}) - --start-gcode Load initial G-code from the supplied file. This will overwrite - the default command (home all axes [G28]). - --end-gcode Load final G-code from the supplied file. This will overwrite - the default commands (turn off temperature [M104 S0], - home X axis [G28 X], disable motors [M84]). - --before-layer-gcode Load before-layer-change G-code from the supplied file (default: nothing). - --layer-gcode Load layer-change G-code from the supplied file (default: nothing). - --toolchange-gcode Load tool-change G-code from the supplied file (default: nothing). - --seam-position Position of loop starting points (random/nearest/aligned, default: $config->{seam_position}). - --external-perimeters-first Reverse perimeter order. (default: no) - --spiral-vase Experimental option to raise Z gradually when printing single-walled vases - (default: no) - --only-retract-when-crossing-perimeters - Disable retraction when travelling between infill paths inside the same island. - (default: no) - --solid-infill-below-area - Force solid infill when a region has a smaller area than this threshold - (mm^2, default: $config->{solid_infill_below_area}) - --infill-only-where-needed - Only infill under ceilings (default: no) - --infill-first Make infill before perimeters (default: no) - - Quality options (slower slicing): - --extra-perimeters Add more perimeters when needed (default: yes) - --ensure-vertical-shell-thickness Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers). (default: no) - --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no) - --thin-walls Detect single-width walls (default: yes) - --overhangs Experimental option to use bridge flow, speed and fan for overhangs - (default: yes) - - Support material options: - --support-material Generate support material for overhangs - --support-material-threshold - Overhang threshold angle (range: 0-90, set 0 for automatic detection, - default: $config->{support_material_threshold}) - --support-material-pattern - Pattern to use for support material (default: $config->{support_material_pattern}) - --support-material-with-sheath - Add a sheath (a single perimeter line) around the base support. - This makes the support more reliable, but also more difficult to remove. (default: yes) - --support-material-spacing - Spacing between pattern lines (mm, default: $config->{support_material_spacing}) - --support-material-angle - Support material angle in degrees (range: 0-90, default: $config->{support_material_angle}) - --support-material-contact-distance - Vertical distance between object and support material (0+, default: $config->{support_material_contact_distance}) - --support-material-xy-spacing - "XY separation between an object and its support. If expressed as percentage (for example 50%), - it will be calculated over external perimeter width (default: half of exteral perimeter width) - --support-material-interface-layers - Number of perpendicular layers between support material and object (0+, default: $config->{support_material_interface_layers}) - --support-material-interface-spacing - Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: $config->{support_material_interface_spacing}) - --raft-layers Number of layers to raise the printed objects by (range: 0+, default: $config->{raft_layers}) - --support-material-enforce-layers - Enforce support material on the specified number of layers from bottom, - regardless of --support-material and threshold (0+, default: $config->{support_material_enforce_layers}) - --support-material-buildplate-only - Only create support if it lies on a build plate. Don't create support on a print. (default: no) - --dont-support-bridges - Experimental option for preventing support material from being generated under bridged areas (default: yes) - - Retraction options: - --retract-length Length of retraction in mm when pausing extrusion (default: $config->{retract_length}[0]) - --retract-speed Speed for retraction in mm/s (default: $config->{retract_speed}[0]) - --deretract-speed Speed for deretraction (loading of filament after a retract) in mm/s (default: $config->{retract_speed}[0]) - --retract-restart-extra - Additional amount of filament in mm to push after - compensating retraction (default: $config->{retract_restart_extra}[0]) - --retract-before-travel - Only retract before travel moves of this length in mm (default: $config->{retract_before_travel}[0]) - --retract-lift Lift Z by the given distance in mm when retracting (default: $config->{retract_lift}[0]) - --retract-lift-above Only lift Z when above the specified height (default: $config->{retract_lift_above}[0]) - --retract-lift-below Only lift Z when below the specified height (default: $config->{retract_lift_below}[0]) - --retract-layer-change - Enforce a retraction before each Z move (default: no) - --wipe Wipe the nozzle while doing a retraction (default: no) - - Retraction options for multi-extruder setups: - --retract-length-toolchange - Length of retraction in mm when disabling tool (default: $config->{retract_length_toolchange}[0]) - --retract-restart-extra-toolchange - Additional amount of filament in mm to push after - switching tool (default: $config->{retract_restart_extra_toolchange}[0]) - - Cooling options: - --cooling Enable fan and cooling control - --min-fan-speed Minimum fan speed (default: $config->{min_fan_speed}[0]%) - --max-fan-speed Maximum fan speed (default: $config->{max_fan_speed}[0]%) - --bridge-fan-speed Fan speed to use when bridging (default: $config->{bridge_fan_speed}[0]%) - --fan-below-layer-time Enable fan if layer print time is below this approximate number - of seconds (default: $config->{fan_below_layer_time}[0]) - --slowdown-below-layer-time Slow down if layer print time is below this approximate number - of seconds (default: $config->{slowdown_below_layer_time}[0]) - --min-print-speed Minimum print speed (mm/s, default: $config->{min_print_speed}[0]) - --disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}[0]) - --fan-always-on Keep fan always on at min fan speed, even for layers that don't need - cooling - - Skirt options: - --skirts Number of skirts to draw (0+, default: $config->{skirts}) - --skirt-distance Distance in mm between innermost skirt and object - (default: $config->{skirt_distance}) - --skirt-height Height of skirts to draw (expressed in layers, 0+, default: $config->{skirt_height}) - --min-skirt-length Generate no less than the number of loops required to consume this length - of filament on the first layer, for each extruder (mm, 0+, default: $config->{min_skirt_length}) - --brim-width Width of the brim that will get added to each object to help adhesion - (mm, default: $config->{brim_width}) - - Transform options: - --scale Factor for scaling input object (default: 1) - --rotate Rotation angle in degrees (0-360, default: 0) - --duplicate Number of items with auto-arrange (1+, default: 1) - --duplicate-grid Number of items with grid arrangement (default: 1,1) - --duplicate-distance Distance in mm between copies (default: $config->{duplicate_distance}) - --dont-arrange Don't arrange the objects on the build plate. The model coordinates - define the absolute positions on the build plate. - The option --print-center will be ignored. - --clip_multipart_objects - When printing multi-material objects, this settings will make slic3r to clip the overlapping - object parts one by the other (2nd part will be clipped by the 1st, 3rd part will be clipped - by the 1st and 2nd etc). (default: $config->{clip_multipart_objects})"; - --elefant-foot-compensation - Shrink the first layer by the configured value to compensate for the 1st layer squish - aka an Elefant Foot effect (mm, default: $config->{elefant_foot_compensation}) - --xy-size-compensation - Grow/shrink objects by the configured absolute distance (mm, default: $config->{xy_size_compensation}) - - Sequential printing options: - --complete-objects When printing multiple objects and/or copies, complete each one before - starting the next one; watch out for extruder collisions (default: no) - --extruder-clearance-radius Radius in mm above which extruder won't collide with anything - (default: $config->{extruder_clearance_radius}) - --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from - extruder tip and carriage bottom (default: $config->{extruder_clearance_height}) - - Miscellaneous options: - --notes Notes to be added as comments to the output file - --resolution Minimum detail resolution (mm, set zero for full resolution, default: $config->{resolution}) - - Flow options (advanced): - --extrusion-width Set extrusion width manually; it accepts either an absolute value in mm - (like 0.65) or a percentage over layer height (like 200%) - --first-layer-extrusion-width - Set a different extrusion width for first layer - --perimeter-extrusion-width - Set a different extrusion width for perimeters - --external-perimeter-extrusion-width - Set a different extrusion width for external perimeters - --infill-extrusion-width - Set a different extrusion width for infill - --solid-infill-extrusion-width - Set a different extrusion width for solid infill - --top-infill-extrusion-width - Set a different extrusion width for top infill - --support-material-extrusion-width - Set a different extrusion width for support material - --infill-overlap Overlap between infill and perimeters (default: $config->{infill_overlap}) - --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: $config->{bridge_flow_ratio}) - - Multiple extruder options: - --extruder-offset Offset of each extruder, if firmware doesn't handle the displacement - (can be specified multiple times, default: 0x0) - --perimeter-extruder - Extruder to use for perimeters and brim (1+, default: $config->{perimeter_extruder}) - --infill-extruder Extruder to use for infill (1+, default: $config->{infill_extruder}) - --solid-infill-extruder Extruder to use for solid infill (1+, default: $config->{solid_infill_extruder}) - --support-material-extruder - Extruder to use for support material, raft and skirt - (1+, 0 to use the current extruder to minimize tool changes, default: $config->{support_material_extruder}) - --support-material-interface-extruder - Extruder to use for support material interface - (1+, 0 to use the current extruder to minimize tool changes, default: $config->{support_material_interface_extruder}) - --ooze-prevention Drop temperature and park extruders outside a full skirt for automatic wiping - (default: no) - --standby-temperature-delta - Temperature difference to be applied when an extruder is not active and - --ooze-prevention is enabled (default: $config->{standby_temperature_delta}) - -EOF - exit ($exit_code || 0); -} - -__END__