From cd9d20a8b35df6c22f216b546cefb6faa490c57a Mon Sep 17 00:00:00 2001 From: bubnikv Date: Thu, 29 Aug 2019 13:36:12 +0200 Subject: [PATCH] Renamed the dictionaries and their directories, so that wxWidgets will open German dictionary for de_CH, English dictionary for en_AU etc. --- .../localization/{cs_CZ => cs}/PrusaSlicer.mo | Bin .../{cs_CZ => cs}/PrusaSlicer_cs.po | 0 .../localization/{de_DE => de}/PrusaSlicer.mo | Bin .../{de_DE => de}/PrusaSlicer_de.po | 0 resources/localization/en_US/PrusaSlicer.mo | Bin 176879 -> 0 bytes .../localization/en_US/PrusaSlicer_en.po | 7940 ----------------- .../localization/{fr_FR => fr}/PrusaSlicer.mo | Bin .../{fr_FR => fr}/PrusaSlicer_fr.po | 0 .../localization/{ko_KR => ko}/PrusaSlicer.mo | Bin .../PrusaSlicer_ko_KR.po} | 0 .../localization/{zh_CN => zh}/PrusaSlicer.mo | Bin .../PrusaSlicer_zh_CN.po} | 0 ...usaSlicer_zhtw.po => PrusaSlicer_zh_TW.po} | 0 13 files changed, 7940 deletions(-) rename resources/localization/{cs_CZ => cs}/PrusaSlicer.mo (100%) rename resources/localization/{cs_CZ => cs}/PrusaSlicer_cs.po (100%) rename resources/localization/{de_DE => de}/PrusaSlicer.mo (100%) rename resources/localization/{de_DE => de}/PrusaSlicer_de.po (100%) delete mode 100644 resources/localization/en_US/PrusaSlicer.mo delete mode 100644 resources/localization/en_US/PrusaSlicer_en.po rename resources/localization/{fr_FR => fr}/PrusaSlicer.mo (100%) rename resources/localization/{fr_FR => fr}/PrusaSlicer_fr.po (100%) rename resources/localization/{ko_KR => ko}/PrusaSlicer.mo (100%) rename resources/localization/{ko_KR/PrusaSlicer_kr.po => ko/PrusaSlicer_ko_KR.po} (100%) rename resources/localization/{zh_CN => zh}/PrusaSlicer.mo (100%) rename resources/localization/{zh_CN/PrusaSlicer_zh.po => zh/PrusaSlicer_zh_CN.po} (100%) rename resources/localization/zh_tw/{PrusaSlicer_zhtw.po => PrusaSlicer_zh_TW.po} (100%) diff --git a/resources/localization/cs_CZ/PrusaSlicer.mo b/resources/localization/cs/PrusaSlicer.mo similarity index 100% rename from resources/localization/cs_CZ/PrusaSlicer.mo rename to resources/localization/cs/PrusaSlicer.mo diff --git a/resources/localization/cs_CZ/PrusaSlicer_cs.po b/resources/localization/cs/PrusaSlicer_cs.po similarity index 100% rename from resources/localization/cs_CZ/PrusaSlicer_cs.po rename to resources/localization/cs/PrusaSlicer_cs.po diff --git a/resources/localization/de_DE/PrusaSlicer.mo b/resources/localization/de/PrusaSlicer.mo similarity index 100% rename from resources/localization/de_DE/PrusaSlicer.mo rename to resources/localization/de/PrusaSlicer.mo diff --git a/resources/localization/de_DE/PrusaSlicer_de.po b/resources/localization/de/PrusaSlicer_de.po similarity index 100% rename from resources/localization/de_DE/PrusaSlicer_de.po rename to resources/localization/de/PrusaSlicer_de.po diff --git a/resources/localization/en_US/PrusaSlicer.mo b/resources/localization/en_US/PrusaSlicer.mo deleted file mode 100644 index ba1966d28c7f4bbe7f875c1d3e51eb47c4cbcd7c..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 176879 zcmc${cYIYv*T20J=^bez0vjbE^eVlB^d692PLh-4NRktCP6z=+MMOjpQ4s+VQ9(oj zrCVr*(djX;`)4Z z9j>AU9Oot&Zs0g23pvi7F_Jn?p?e*t3M>rogK@Aod>N9=`3)9?*G+Mp{IDp@2TMcc zD-R39Tj33`9rVK?upHb1E5Z+L`~?_AxFCg3+%tRo+=x5dI9S!YfeyTxGgp4d@bX087LE zFb*a{{&QyXPfb|vL8Gr7e2#E0SO|V^<-fwQgbU1YoH8&AmW9)7cp+3hS3@6s52{`@ zA2NCxLe;+|RKDIYh~p$c+2!C&lkOXM3*n!j@>iT?>{tyBBpd_lzzMJze8F;^<#x-x zP~{ziaqt4{2`fBo>X`_e5S|E&!&jivZ-J`M0hkQW!@_XDY*U{RFhDp7O1>8=-w{|6 zo`)Ub@307L`-ow8Sd{QUD7%ia@&J_G!chG)6Uy(OhN{O#SP340YVWsjF#HY5jsxbH zd@0Z+oC_si0F{3={1CnmpMXz4itoT%A2Z{*;^W4?^`Y9+7^*#OU@6$o%6(An8w)4G ziSR~v87kfN%u4F7TcE~eZP);Igau#-s{Iq7{AZfw0;qAa3M$c9Hp~~$EZ-zr* z44edqz-OWK{0?1M=t)!Gno#v`1#7~Nuq8}`nx|iYDsKmD1V4nbN5T1~o@Jos!Dg@> z90cpbxv)HZ2R4MCT9#N~{HQ&YJ-WlPa0sjb)1l^x`z;@WDsK*yeHTHcUkz364p z4rRALpzP`{H1SQK{BQu2y)vNeH6Gpo?}O#wQ&8ovvD^h!&gW42F57U?r_4IwLfNw; zl;8D*^bVWd zUk*dn{}_~gE?K#=7+)ZqAIdIWU==vV@@`m%@Y7KJxf}L^SKv|D^BL1GF-uH8G_h<6 zRiE~-8jOb;KiN?JGY!iBW5c`2S>nIxCP2SU&3ne0*ryBmYZ?g6iUw+C_i5hW#6sves~nB{-a+s z`h!sAKMo7RWl;UL3aVY3VJ&z7s$c(rvUiacj&nD>8LEGug#+M5*j4c_u@=AqumwB` zo5PAPn|WveoJII0*b=r_Y4nF-9N{TY{qYja2e-q*@LkLOQ1$){ZQ?j0oC4RHvA4$x>Hbo{2eR{%WX8Q1(mOz<#5X! z%g3PCKTzZGFf0$xLiLxk$>=W(6<-0CfwiE6F- zum$`AYCKea!^GbVrN2IuyoC+7wej7c>^lgmJ&90uNQ0%}-O%%Mm`-@Ljjzn0Q2iRf zim)A2dxt{lONXlWM5uI+K>5XDsCuuk+z4|B?|^k+>&^Hu3_#WUAXL3RwfqvQoC{Fp zL~k+vRSL>()u8&LAyhlsz~-c@pp{j$b#7nEH;hthu*HiCabuql_cq9X&U^eb63%+p^v8K9yZsLDhRxnH={G{@ z-2#*0E~t5=;Z9@Eu5cFN@lfRzc;A#))UpcftMo7y-V0^7h}Pw5ATJt*Q>B0JOY)z$R}o;yRanTwy*%~1LYrs ztULo&Bs>|aU!H`e;36nJtDwgH4yf{v!dmbr8}HIcrEdyVPFE;>gRT5dE1v>Y?xRqC z_!88(-DKta;B|!0K#h}cU^Vy?#Dq?TPfhysQ1yyFZuiYlem5MdeJN0WoB>szdoAZ! z`4Tu5`8wDGx+jdkj)n5CgHYvv3RTZ9VIz1E%CBNhnsQn|`Dc4r1onaIm!VMgyVLRk zD7!9#(*G>H3BC+f-}hk`xZj2=d}h*DvAhM!|Kng?*bAy&6X0C<0F?bJpEB!iJ(xi_ z9=h-?cq9A*%HCI?$}RV~nKy2Ns!w&O_zspspxPIN%6}KE3ZJy{O;GlI7s~#Jq5So8 z%O9ZZsF!#3M`5V&O|UeKfwD(4cpdCu<+nkl9}FwOJD}P(4XV6(urhqX@*ODu`~u4F zet~V^^{0)$^@G(32jDI6VH;ip)lVNo<^LACFq+9g^}7YC+*_gS(*>@Di7-E`@D*nl zurjO(=Rx_$c6c}Z2wn#VeQoMJ6vh$`z-sUjsQRvfYUduP{p%ShJO6aX)T7*46RrW} zUtM7VI2x*7l3{IlujNY1qfq7KKWFM&1Lh-K7s?Kep#11|C_5xV^?$AnKLS;+Ww0=O z3#$M2z$)+~D7##OlVR!eraq6r9)w?l>c^kq7FhTjQ|?Zv_I(3o=VISle}{Jvz6Gk> zhhbB=0v3d)p#1ABjDf#E)xXLG!`e{xXbxM$c&PS10vp4*Q2q8kl>PQW_3vRQzxo== zzL%lwQ}R1Azc+@e|5T{{?ex8|*I>(ZsCwQ9+rrnO%KH^2!@55hyFLz;|0Sq?-wI2? zqgH+n7A1TI%5Ft28v9g+I|$c@s^=vu&-bHwe=iUFBTs~yU)MwF*$YdV z!g3juo()iX-hpbz5hy?T7FK{4q3TiO7dt;f)wep7-bSz%>3#IoySOh)+ zYr`e5Jp2I4FHb}1ulB3a(-_J=qoDl34`uIh@K(48-V6^xjlZ8Q|AIcp`cUPz zvFrwG5RQjx*F>oNk3rS@DX4L{9LB+&R{jI*K=@DC61Mx@*kJ-xy{Et%;Nwu^f29rY zg0jySQ0abzvUmPJ%(yNKRgb%&8MokB1CF=K-kpj=y5Y-BhUlcp9qw^-%q{3##59Le=vtSQ%b{Rp3p3 z@hu3pf-2_}l)wJ~Rlf>Ol*a~8`MX1v>$Bl>8@}I$=h*OzQ2oCi$`9YP^6gM|`2g04 z)-oF9)wk$%QC_=U%f?Xl>H?)_u$7O3vdf)N<8CsPU8X{n^B7dSpM>h~XW;;N8p@BF zgm<9exaD*FT{AwM2fC|5m7e>;?P76sUZ! zLHX%68-5?wC%oU%DG=rDgBnz^%I<3|cSF_p3#f5;2}-|PFv^=RYCyHK6;wUC zK;`#Yc`j7Fr$Y7r6Hxlr!=CV6*au!;$o4aooztQ8hF}Xg88(HRpbNi)sz)haK9sHk zlt0~U*$B#x9ii+n0;=Equnr7cF0tGTwa)(zRo}`*jQ;vi{nQl74|+rO_b@1bO@eCg zT~PDpT&VibhZ+})VQaV!s@*?8>5ncN<;{m>q2xD1mD3p3ggtD07^)pp;7#x;D}N1Y zT)YQW{voJwd>%^w6<7fPgCpY@^gwYKsOQ1$BvtFs=AfzosTErzS1>Twi~hUef^*rR%s^B~*@tHYr&M*n0e zzjz4Bt}nqx@GYo%{RCyV-=X%yxBg$LPZ-E-G zwV~S80yc(Stb77gy{AL9cRq}TPeYaSj*Z_3rROs!Jr|(-;CHBTT_Vnmo9a;U?V_ynA73J+?d&5kEH`R`EI>A{`{&4`xF2BNN@Gq!xn$?MN zmcY(X{_+*n`ry{|vPrUEkRBYbB`gEl}gL4pcw1g=OGCC_SlA`Lm(M#T=-9TLINSo1y${FKkKs z&q9rx>Ku;AKE0vxXF=8TVJLenf*Pl9Liz89Q2Nh9)hl096D|%l?qcCo*b2IE8@wBy zf~u#lnQ2D`R6Fj0e)t5O1^<95cSduQ{za(zY=D}7-ho;lK8Nyur-eyZ3@#*C5lZiR zE8h*}??)_;L;2a~Fbs=ejQ#L#*ah}$W%e8MATHv31;0gJzD<;q0`s+v^3HwIU^?Mr zFc)@jXZBZb!`lg$Yaiu(7fgd1uNPrkcw2`keL{AoLd`4HI~qUk12w)Ez&UUiya$fx z6y?329EU!_WjaSWGhjB>25Md_)+5S0$FBo5UPi)~;asTtbnF@B zJc=Dh!fyzF-z&=50FU>M(kCS6@jg+`IoP{zlrsf3?}uNK{tY;i@ag_h-tUn*4!}Q< z?}l}d4;>igT!Pc!4ag@BGW)2L*QG=`kHNL6 zW?kqSi1L0HG8s0A<_rb?MtR?jjq=XT&!sco2)D|J^4_a@2cw)tgnxwX(KF{xGtV4^ z(+Gb8HC}vKW?e{z3THx%lWe#bb_tnrRxWH<8$OS`18f4ng7T9}*=GOU4r;#W0i`b< zY91W|HBXI(O<@+i4!#JLekIiWwZZZ|%OgXuER?9vUYKStVcCRBgj4~xMWQ0m8agQl)jpgf5?SBhC1dqXkFy&s>Tl~M}6!gM@_eD7`A@@&>@_q+b`u-^A0^#NG z5S%wH%KJUZ*aytGI{~$RXH7Tt9S>U*z7MLOw?Vb1Jm zODKQq3*|SXq5LQl%CBcZtsl==`3F#TKL_P6`5rTNuMAaQW2o{vK-D)M%5R55^D*q~|{M(@FdkEePKe6FIq0;A@YxI_Z^26#-`Fq0Za3oZ_raVQ&9bW7D~@$D7#;=EIH5k zlM9(XoHkJ9w}aB#6RN+5LFr4e3_{f}2TI?AQ2x6B#=;#?`On+<-=O@Y=#!?rN>Fxa z4%LqxV0oAX)vk$9{V^NL&d)-%V;fYtd!h1w2Gy>!Q1$yBs@z|o{J-FQqtAu1PZOx| z*AA+G2Sd#t!(ev|Fbc{)mM@6%{;uFX*qd%c2e`PM`A(}z&y zpMZXN8EXC;`IH%-A*lFSPs zl%Ca4`nN#!&&N>pJp)z$3sCm{*~*JQZRBO3(p9qIYL+#j^f!c_e?Zl+gX)(HR(=s`Ui%BG|0*sv`WnL53Acb- z;3e1vu6@R=2fsn3AH2laF9=oNDNyB2hpN|HsQtzwD8Jfl`7U$`?}PHY?_nH_e%9>c zYeV_{Iw*Z7;B)Xil%Cno8TpfNEa9b4{$2WcGq1!zg2UdK+)T@hSyyY0nbg1$sK(%)k z>6<%L$5`jmm{pW0A<-v+84w?mx+WJ2}NOgI?MhqB`jQ27eHWcv9A zD0vI0{C(huFcm%l+q@j*{awL_P~&;iN@L%>Q0+Vj)t*nG#>013?yNHHD*`7XzY%I3 zc>*fkt5EiN3u;{Mf(_s)sQK;s)u#Owq5LJrvISKC_J&H=AF4e=p!($wD81vY{2r+B z_b6Nomq6(o^op6s0#J6(fbyeUsQ5)t_InkooGnoO^$t|KKZ4445~|#DQ1kjPFa}n7 z)$FS}Kn+(amUxfiNF z3!&_`)y5x!^1~mX>{Wcdu~!8sf4v#XpISkc-`_F-RnEOo`kt`i6|frNtx)zn1?6`a zU_BVM!PKJx)c74}c^8Z&ybLP+2XHU^49ZVdZ#3g?BWy$XH>h;YH<|K#Le+CL)Vh}q zRsRW4_Ib?87sK|1pNF!`mr(2DUzSx~GxJazsQ$bI_JWJxQFsojUv|81`r(k}QKius^8sE^`8&r7fYe?uY&Ts%~0t- zfZBh51UJKrQ2q7Fo5l`1q0a42LG{;Nn+@kc*=;GD3*UfRZ~AXB?^}05#jk=I2RoqZ zvm0t$eGKcs&!Os5a;vdJRj6_rLHS`9sCp(r^VE}F ze~GtE`Hi9KeH)bBdqcHr1gr%!q55?pl)Ybscf;*a{o7%OIhVX0c2zu_34ees;N*AA zdEq8FL~=L__ITIKGe@BGmwC^OmugV`(F4lQ$3V5mZyAKLTP{?+AA+*$W6*`GV6iCn z4N(30=}yz0FJKMAm!al~s_#d6e^<~6${x-x)88>r{n-G@?tP&AG8@WoCPUfjX*d|J zgvy_Pw^^5KLA84{>W7L@{@D=9Ut7bGup68JmqE3^+CDQ*%lDz|a>DXA%kl?| zyb<*J2Wos}L)mLORDUgo(!bosZ-Daa_o3#U<4|_I43)3sK~w)&sQewE?Aim$UbjQ} zg&#`KeNg%5L5-``@MX9a>bxWEkm;|pQ2Kv_N>}7Vqwhwj_SS@ww}tATK2Y<-BQ|{8#(xdf{!38piT=pgsVLO=sRBJehv|g-*!VZ0+Pe?R zPA8z+`wNu5Vuww=Z-h!$AIg8)Le;ywtD)?(4XQu(L-qHkusQq=sy%T>jGbFT^-F)t0F+(th0;GAHiAz<<=Y2a!BaNA z@=;^whOhzhrf@4vf#YF~Pt1Jx3|vn5N2q>z>X;eVOQ7uWg5?^h@;5`ZYX?-j4?>OW zV{kM40;)bsJ~eh<3uBqbK7f*6I&S8-0w;{!Ye4l+Q>ga#gVL93! zzP~{AchqTfj!+IZBb*3Z!iDe^co-JO&JTPU<^5g3oUhFHmz=MoyuT~>8g3`u_%mjI z)bgzPK2i3Z`Ofhg>_>e2^Jd`3lNEf41^c zKN)#7sB#-Z`C$*J`Ejt7XF%-}AAst|hhR1MI6MS5K&7AYv#Hk-sQ1>5Q2zWIRQn2C zHhxtcsy?n|11oP2$0Co1J>XWD42%3?=O?K0CqmV8D%89&2g7dWOL+&}YNTq0+CmTnFXIH$d5c z6|4@o!VGvCx-kBCv%ZC)>^B>#++|Sn#!9IAthez8Ezd&DTh1RQe+j5{sV0=XJCuC~ zL)kwC%3nj4Q=sfP2Wp%zu;G?DH{P3opU^ zaQR>6yX`7ilW-iToAQqVQ1fCk^!x(KPUm1O{0+*lt3^e7_3Z@J&XG|2*IXz&Pm7NB z>ah$eya~#`jzIO__fY$;%dj@Q{yM|9mUlpv^8{3VH$nN;7AQNs4dq8)L)qaHlz$Y- zXTsH>>eURYpW>nVb0pM$E*Z)$_ruBXS*ZF{%OCBHtJYBc_yF7j7eJLew18>PT~Kyj z1U-L;cMx6&Rc_US(cbsmR#1ML1?688p!SUqLe+n@<(p9DzYkl((@=V=6^i!0OT|Lj zVHlMC#z6IN3RM4$hqCWE=V#ZyQv(do7Pb_19^rb`>jY@>hqdcU`D?r3H+GL#=!Y>_GTosQuD@ zC_5A_XX;%B%5P$z#(!HI9u8%nFjV`dLfQKXcn4exRgY5TjXVy@{>`AqQ!l7;5}-FO zp!{bdRC)8D+W899INt)*k4K^W=o_f=e}yWyaD`~^cZ4@UwYTsMX55v7>W}(R<#&PV zzu{2z_CwV(2Wp*}4K?4bgiGNbsB*F@8h@VxRlnty+oAG*0#)us8@^)0=7302N{DEs|k!)2-%|Evx*uXTm0hYwbVsZe&E1?8`c zq4K{A)sM$vfA|Yjz8+PLpZ13e4}GBf@m2NqdKdrTV8_JG{pvL>RQ2q8ZtON7kV%W%XG}Jmj6Uxr3p!9Ep zvh#aTesBV+zt2PY>rYVaEm7Ufo3T*!uLb324WQ<$+o0M#1xo*8P~&i^m9K>=X9uha zkJ395gh zV$FDUq2k*@wX+x0Jm-fRPxnLFYavv*o1yBrAFBLsq3r(`)cjMC!Ke6Jq2_}DusO_x zs{e~n{`)rIo6UQqMt7}x|ZwDSGXo2PBKSWQ!|3uUL)Q2x;kO3x50 zPlKxOcqlu}u$%`~|L37MPeQf-C{#JWLiKO8T4w%g3bnr(0X1GL)sFUl-`pOSkK(&> z9mY4DRu_Hn#d^`+-xchrAMO2JL8FGu8_4H2qMzWI#?jv26EClu`b)MmesL3&U0cIOFdnL2)1d4&6KX&F0#v(pLygDNPriV@%ScGxw~Lv__382?O^I%5vsklU@WW;RnF};ehieJJE8R4 z4dn+jp~m%MsPVeq#vg#P#|hX9eh0sYwL6-2-qgvgdwpRqRY_Ig)P5(6MVf<bDyerWTcpcRE+zi#;eNgk%mr#0sh00%`xAC8w zq57>ARR8pW^0U#fCGDR8HO|)eG4?qDmH)cFrk+)y##ue6aoQWofBjJYISHzsb8Yx( zsByOuYCPsmcLmGf{e=I71K@qb%zNu$xR`Lc z;buNr4|@_m2{pcJkBIjEu3$L4hw!)XR+up|+VR2X;S5+{l-Uo?fny1;gX&**bhP(7 zomMc3@JaXp>^#P-r+c8;^xu;qnR5-uJXL*b#ZbM8*y50X0wM zLald;U<0@rYP?*4FT>a*Q=dcdQS5jDeuMnpB4)V^TxUB(YbO^){d zuAu(i(ca$`%z&R0pKwpK_jd)i-5c%wPPp?Fvo0Kg?T9aVAN>%`@0B1&lFmK%n{$%wIlj+$xeR{(1M{upYU zEt_TdCVZaoLD&T5JZ${rWvKo4eyI847?l3gQ0x0ysCnvpsCDkT*=C>I5-NRLsQIg_ zL`xXz%X|YCdY(Q|K`> zPO3o7!(E`-+XrfYkOVa!g<)|x$I2I5u7)wlw?gIn5~>})TY0g^jowCZ4DyyXyb#LY zo`YI9jzZPH_*^sJRe)NzZ-JVZd%!j@0ct!x16AK`Q1kRocqcps`@#4pOg)~5nuph0 zz6WKOqfmCdV8c=KOn;S!#gJEmYF8ZW3;V#j@M%~R?tz-Ge}<|@{wIySibM5#WvFs) zhU))jupw*<a zrJs-X{;r?_RJ!P;#@2k5Ki!0@Xi7R+@FMCRDvTLyemu zP~*Z6RlhKF;Z&%0FNGTCtDwr;1T_wKLFGFR)t+xG|FkTz%E+rirE36{za3Qm{!sNz zf;YplHvBMD`ngbgpNE=P)_LlLG<;O{e>W2W7y(UBL zOQu2X+m=Ah16!fmy926zd#(H<%TKKQB$R!=g8AWhHvE(26)5``e8tqe43xeYDE)Py z>d_RcKiWdIdjM4b`JnWsL8Z%r>h}pydZt6!XSU@tP=50&WcqOSLY2QCO7Evo{e2!v z-!GQVtEPU1p!D4c<-fI|>^=x8|0Em#5R{)h1y$b5P3bE*KJP${zx`1Cdj{(K|2$Ot%h8!@ z5d2EyL<9>6Z{=BgkU7XZ@%%999>d5?Va|idByqlBOc^ z9ONIv$833Dk>+mn^gtF+ncQ7%obtWN^JQdDl5QT)Y^$7;HvS1E;Oa;?nfpgu-j}2q zMxJe6toi3Y;x17(KQD3KC!YVDhX_9ow~+RB?)iju4JR!>lk~1eBz%(R)5P~OBBv4Q z`XY-au9_{gyCtsy&H?TQ-0zU?Bb(Z__oh@_e?O;;;pIRv?doxuly#{<-9N znD7qdop|ntd@awtt)6*s3wggK?J4*Jop9`yDI)6L~>fzdpo=to$jSUqC*`mj4p+6WkBxDYHFg>T1h9m-LZq zF8RJ8?q||&L^y@;{p4-NGs}y&{*2}M0BH&!pUm?*p7q|TOZ&4skzY?*epcap&U4=D z^E`FX*;p&$wdeZ-PT`&|8EKl^`mH4HsXPjDc-GpHMxE>A(Oosqvyzvw_0jW#HZG0l z4(Mf@>5PX@+cJ`ff0X+qI-3!!fg!@xuqmgON(xtWcL#x9R*njrI z_el2)d7dGUt^oH|WJ=yd0BF>ZK-DKl_w)xr+ZpibK=+vHopU^pz zY+Ny9g>8D3d(6ta+ImQ)t2g%n(iUX#50a)GVSYm8v_ht9x@8K_y@c@Po4gd9 z$-q?7?q@iw_$it9 zF4NA|=?UaFlV*>t$6?DW=-kiq{oEx6=;}gv-%$i1eGu*WSwiB0P-n4dktk>=JB(EOL$HA&q?JiJN2f-;L}D z;iKG@krkpox`gjYJB0fVblwTW#Q(+p2+!5fn@O5&#OWGh`Iyyv6Z&*rPq;158N~An z>crUk#G*sj_tMXO)C8SEHs3VzmE`_~xcAA!YrAu!@*^8+^V%%Vcj&&w>Mc#Yt~a@T z-VKaDmXXNPtIl^(SSNYs^3123@B(m9r|Aa-k>+)QkJIj`Hi06(f zz+QUSeV_Yz%3BS0l4lBcHtA=;LpEP$%g@Mr8)@T6TNM^Y-U6MGD?pye)qu3eZ961e zX?5uNVLg*}mrb8ba1Uw6*}Ap2Jb}C`cVZqr1fBWB-$CBP=vl^HoI3O*O--JU6E{iv zx$ezVpWevw;fUWMyWPrXkmhwSrTJ&M&6h{yxXNeS_zh(YCEUr@uP)&)xJPp9s%PbT z?nW8Bjycnjy5B2p zQJ9m=^CUQ!bYH<=i2oef5?kLFk?R_TE?r~D$C06T?dIQixmT0+HtwP}kG@ZQ#9hUP z%RoPQ29b6ny7$@qXOQo;ddnhvia1?waNkRQT~VY76SslzR>I9lzntf;qkLA?;-q`Ekn8=<9-EsedI03lMBzlyW@X=# z_7CJ^3GYMCmnPc#-xZjTyfSxx^c>{YHJNaJyACL&)nZY=j&!X0g0Dw2Nzx;}&-z`^jxNM`sv z;cd43@5on_d`0MkA4&TY;dhB2$n$KdtBTdD=T-WL>p^6%qoWOJVr@Ff-{w9~+*B*O zYz;uugseHT z?L4n0PnOlY0J*Ld(tgPO5#cSQ)Aay%Kf>v-2(pmX*Olj8+)vrC(zfOKRjW(kAo>R( zD`{m9Asdz_{iEc6g!z;e1Ac4MEhNuf+#QI2oAftxU*fqp@n4fRzfJcLY5qX2 z>jJVT?ehjBa;A~5FY-#r8^K$-pCf+)@dfai?_gEZ3?n`tx<2H7!RGyy=lt9Stj?L_ zdynU6xDY*wJdfk%GnaFU@B!p`uRh3zqdRgv!-JnRjgj9D2gC8`Ux)l|bm*#qtfzfe z_+8T7gpPXLF3+DzXs@cItwH{MglEDLwyZ7Wk0uFz;x#Ktc`egk)`jaQ!9 zJbwc3Q-EtSWv=4hPTop{b8X%&wl3G%a$nC={tnV)E3K8?O4<|lxw9>699&AelUC0w zgcAr~PrhN?Bao+%XAk#&?*7P@Ak#VYM4N|4ryhCE=)qnq(Q}ad2kzb6#i{ox?z^}P zlXjWXBma!_K4i0Cf~}iWw6@P{C?iPtHPY)kK=@|vS543vOdxa5q z?QNQY#Ob;L`Fg8s4rL?|e&5C^z6Nn$kgu>EuMZ;YOq$g!&?Ig`3q}O$r zdol5?xxeChC2UTbu=EigWz+qH><98iu8pK~xVIDk3vq*C4je1FF2Xgrd-C`+cM;^} z;TX~!r%t-cqpvIByWl{=pOL;l;SM}kvU=_$oJIIP()@;Olg)b*&oA0E>2P$Ox{=&D zNxD+xeH5L^#Q90{jUu?-<@q7vHxc&^tYXAY2G7-ry9-`~@#Kqzx-P>Dwv5e2n-&hB>kIeBV3p#Z%3=|0d!14UW>FHNta~hcObjP z>OXH~=aId^J)CsUa*rU-rCxF ze>maYw#*l8nr_HObC>2Gk8CLUza>o@?p2iCn7qA^pW}Xrdl2$nq`gAiOw#7SpOIhW zE^W)1M|>Y!&b`t_no7iPfax%Dg~(qm5`deDe}nru^6Z4V9w2=q?pB0oPe|J92% z|2#mslWqE+c`m{88>H>Yb1JMz{wX&8II_z2c@c4ms3@&)kQDG7xpKaD3_4m4TRj3EI-n$I&MOC*dlhQ&v0XsVq#oh zMw0hX&vEOz1N`a!^aLsw4!Vh{{=~6vaxlxy&P<{LAt_G{hcjE&ub&bKr)DSAOAMyh z&&Oq zx<7*!d3B0uT(42Go1R`jL`8`6n}o?~XBMT)5b3`0f%L!xTHv^W3=*ZenZ7Wl$xv)Y z5M9}snZXbVsDDl{Ype=t*q}iSHpmDC!nyT|6p2s8C~kK*loJRirYd2UKM|t_GW@4Hm z7$-)}tLu75Pj@2CeQRy~kQ0;S#&L&I{b^~TnhGZQQ~VizuieSMM1PoWM(R&Wp%;<^ z;{-dRV zba|HA8WVE6_|gMuxq3Btto^gXZl*sgk-qh%_?_4e2|@fe-g6Hpwo{OfOUb5b zxaU8DZhVF>Gn5((hn(2XSe;&v7~hG#Eh!M@-|;HniR}{c9-JzSXNTN@z64K9iCqF2 zfl#Uw+s&Vr>BM&Ts_ew}@sAI?ZJpS@nYezxtl%B=suSBUO=HXC#!-{~S^f+<)`{(( zt?~x=Gkt+9H-2C*&ncbQc;7hxwcPQZZ@74r6MK8WpX0<14rC++bDX#V{+epC-;M2K zgPxN(ap_bpJv+UoQ`7U<Ed<;MpPi!_D?)3C&RyeXXC|alW){>J&_-Ca#a+f)O&A&*&rVTU`HEP_zee0D@-lW^FSBE;D6Etdgs~30cwYUx)cOb^X`GKSmQ<5?Jc&ZhgTJNg zbVy2ayJv*LN}yIp#=jd((0DZod~Sw6$M~N=%ge%==Sy-KNvs95f@vM+@fHJ3R&IJQ z$)9EuGRrDKoX?f7(+|v5EVP;gGzr#peOVfko`wWgvWS{`?m)SBx^FB4A&+{LXZe|f z(*izR*DTV$v{2BG*lYp3 zlvF;D9Iy@b3cFh4keidrWR}6APAiq&H!c`R(n_DgOv)n3(iF^8IEOhZRL@Ss?pVK{ zXjTbDT~k*F6S5SVs)w0~+-9tuo}>ERv|upP4Wy_0lLB-ZtDev6Wo&ZQ(57jbKKTP} zWYzcPW)lde1(G7mwzt+ssus%5(n^L^gKkQ;FUyw^_S5ZcyQ!L{2DU`XUgm#c_{a#ER4<>z^3PR()N{!If5jhf5thDrn9mzkLs z@CIB`k|tqFGK1slgR6DL?TrUt6}5ExW`{FbRMUbfPKRWd45U328x}=P{90G~ms`Ubc+jgbB1F-IwdFPb?{8GlDr8W-gLmrhBt-^Hz;) zT0}e20%PS8+Joh?&0_#F80xtlO_MXTvr^<~%5Iho2BDmR9>*MZFDLhPL%zf;+&wWs zubVMnC*ri;66Z@}Aq+_in`3Xm@uf3f!)l*4&soaoDOO=QflN&!Iar9InC_FZnOE%I zO^evIqW`mCEXbmzbuknf-?{jgXK&BlBEz?9-9)c@(gG} z&r$&q1L9?L5}Posv=Kir-C#DVCb1^nBz7R=4ANIaTz1>|qZb&OH!v&`z}gv@oL-m9 zu&?hx|LfJpY&qOJg5Kh0r!?GyHKLW+&;l-I&3Qlft0&c3o5q zWw|y)Fl~0Kxw{EDrRU` z#9L7ky@sz zkx1SK=ol}YD|btymY$I_@M5}^#T7?nq0y>#wdeot@gZLGJQckDb!PgJHXeKVlUZ84 z#{q$q)X4LoO#Tmk!crN`z(Uz{N96s9Rme>IbRF`#dM%-eTBEEalG2RKkUPA?NRu?n z+xufny`1?eG>exrPszWDZxDPq)K>0euI%0aiHNCrN`&t9B|c+1^wYc@<;2jf^M;8r?0g*V5p>lSW6T zLq-7$g*Vu>k}$?KyGc=G4;0MwHjXK5$TI5{>BJ}>tIQ^`tQgr~{6FUWujSSI-!#g5 z^YPyJ%@ko8#ESPnx92~q9BG%)X;+2+FhkyIwfg_f%yh#)yZryI>DfZ5WAP4_WgVqx zTItBZ;dVKs$@E`)@|-B1DZvvB^ry3B^@W*%TY7@f)zsl@QC>`*u;(LYmuM${xf+u) zUg#|(Yy$B>W%Qug_x#%~!A9{W z#QVBl#5;OtdBdPNl{34ZkZX4p|1NgpysZEOO0yn=%3CxrVNIu_w=K5tc8`%~ts0RN zvxqG3?ity5r(;%tVo$GqiDb(+}fxqUHvR!)FvRrbe~#-Ut;RIhfC z?AbaJl)*GE1tRO$w(v9kY4+U}fxp z2M^TIQYXF9h1|~m5Ib0J=5jg>=v23HBeoOXNve-?k|d`Si(nQ>dUST zo776ci)l(k$YZ^F^%T+!By;9yU!<*bZU`Th4ZIVXe@UXV9&ghofBAbVZxCW79lhwh zF7gUx7N%;h_daJ|p^S{p!qxE+Nqud>Qw=kH37o5j1OAW#8n4vy@2^LZS11y2{AFH8 z@lszFS-h3n!uBp3qrC6uW=Cz7bPCklqPL^;UQ$?^;%e1P%nH|WYt_s2r`Me1g<5%m zNgeP6nJI*{mea}G{<(R#jIq7!wj~l7*>Fd~^0y4mZ`e(+$w}ljn-Y1F{2#{_SF_|Y zt9fO~#YxM8?8~!#jqH?26FGa&8y#8O*@|+=jV;vxjURI=tCJh{(afA?j~vHZU%zk1 z9`!lQsn2m>{eA-m#doOL67B!U?;TCL|5JKqNmF7R%C4!A7+3I4COnJ&kBVfWFs6_N zuI`GxF`AJ3w=FPz8pzVX&vH7kPKK_&FA%hw0qvh~X739F!c6lzR9E{u`~HY0rC~0| z8=vN14sh`#^K4#(QvKd`vJ+>j90D<&(-L0F7+tv}`%j^pVZYxfHgarfRN0Y5vHvYb zW5Apz{6`u##Q!GyM-K03Tw4PsJMF0KlHui49J7oz?3}j+67`tpJR-IOX4I>mn*Xjk!iZj0auR`x!WE``lUVBUmdk~{Q2HR_GsFS_v z6c4#3iVQwGP4THLajbdYxFb8m%jMM~qJe?aIh#daABuDm&B0q@m^CG@O49UA3n!!)saXP~N!PEE~`qglGl*ol0^3+DuRPY$GT z3ad#a)6AarTowquO-~4<)SciP<2oZIngA5j?2#%^i;j1*S+ zzsVwJX-G3QEqD&&`6BZlXC6LI(RdlV79pJ>4Ky8XXu0;8S9bGu9vQaP-1s1eJSl$u zWyE3+9llYAKn8CL0Z!wuDM&Qlu1R0M`|mMVJ@((Duli}8=oH2Qn-UdgCP&<}8+GSp z%YG93M`EnTS%p2dH7A@X(1DGuqOk-MsOJ=%*DAvEZnG=?`(WiHTc1vK#>~!)Z($ny z90%#^b+V5WE{u@HZkgkPbezP~ii0;AuY+zrdU48$i{L_mY~xM|ehD;-qbBLvw|5L| z_J$lqqErSo0Z zBOUA}jkE6#bd`?Vz1-%_PhaEtHlKj6v%OZ!*d*zg+p8HtUca4A*$JAw?dJfU&`52J zBFq;8`_hc?A7^7%Q($~KBnv)AiotY?$cu#$MtVCE>CJSQm$#wp%!tq~X|4`%qz%7g zi#WW~NRQ_9$Q}ZiE!i*{MGCVnkt3Hu&&iV0*%$UPL1>~4va)tIzf91Xxpq&4y}pjn zn@g`A>e@!Lg!fI{4Ep3`5~%;v>s_tA zx1037xtiAr+jMy>M#j1R+1!6da6%dia!jswqO0FaBPR@z6~-#zHHj}l-nVL1-VVM0 zl32csQ~gJI5#xB@WL507##mR3i{XGQ(hxI5yw6rd(q0WHFQ)~TJLfuLCkK;!rS^~qV^)zH6FSBCg?BH5L8H~x#9zSGf=qn6S+06I@Ei%Jqq#8rricH{OCo$z){<^QQ+4VW~67a*2$GLnDh%E;x&%U>$yhj zwa=1~DD&l`t~X%J2TeE5JIK{%P-b53G_H;-{U}90Nl9it)){0DZ)^JT6Fq||)A&5< zP3SrZM|AaTuqx%}Goq~xhU4rOQ)zPY>c>vftik9qh1&+3na`UH<3fB!rpyp$@n+zg zQbL?4dq3*2c8?T;s>nxim!DesY*~m+!mA%|jQ5&TiT_oiA_KHW@nr#j<_*gGy_42q z?^h*y?ZeXb?dKXiT<36@$L@r$m7tG{yyc|+mx|cWQ%>i|cPdPho*tQJ%;t~7E?&a^ zJw@dBz-|+-rLr@XciYMo){3#)r4{jl}57;8j2NKE^8vl5u?T@hqmF zMw!Fn@rj=Q5zh+>Gm5tls=>F+$PW-Wu#ngAs}M#fU&w;N3D?fB=$!;_%fPNM5Yo?N zvkF*^82#wL&>H~S^hd%%?5X(oe*AMQn5UmG27i;}0D$m)wp{aJNA*N!Ad zx89Ci?+xUt_Q=5#KM2iq|D$Sui@lmB@~RS<8L`pT1)as6X=p5d?>Velhcsda%E0zR zEZZ(?TeD|n*m#oPFGJ@)f;+ytQ&dNN#^G^I{AwXWu4;kdAc)it-KKF zEndGvvS(SE2)xgibYtnC?%UFIC5!TNXsCf*(kqxyg5^sL)H}tmn$Zw}2Uw_TV zA$$=F8iUaSX{qBDVczJ|H@0ry`Q|-%67OJsT%VEQv@+(*lSP1W!?&b326KlQq9L~eO zn3B@UPuGY>y1T4c&4sD~s)u@ye_kC*KIhk27~8vF64G{Ipl5eNk1)Htzc@ypDtjI~ z{0uD^{DV1iy~5v1G@o^Xs7U_tv5a%KF}r&J!F=>j9}SPc0WAt4C)n+LJ3RRYPuDr_ zlR6>xjfToV$WShQYe(OF60KdFunUrm5+{T)MZ_OgtI&9u;{o_r(mBW{RgPSJ7aPMZ z>vZve!AOL>7HCg;p1qHTM}PdN9R@ypcC>qljcTd!^PzmeRDHE#uCS{O|MtTV!xsM+ zaap3#WzOOvSPaRCi~QqLC5W~DBwpF-!s!W#I+%m<8n=sheOtTQgsEOppKTd-S)f3e zY@6rDFo7TwZi&ZDUIdAN{QLwMR2~xLr%&nx%BiO_2$oR zv_XE(jkms>jDZbBh!*Sfau*)s1S6nH4!FRFOM4+N7x28*A;=cxf_HIy>DB*J+Zt{G zsm3k%k_9FT@PiE5*)6qy0>)auWTg%;?^@7#m;qhWQqM9gBDW=*VvR&)^3GrJi6AhI!?5fqbCJV*AnQX~{(f z@gcFd*f9qMIw#oGA(t#DmoLFa&DZBsPP^lbAwehjN-;F~!oYn2Z)63 zv_g=9A{w*1%;L4>#o65-AU2`N;dij%=#CJJ!|_D$h*XQ$o4cm{ zX2d$_`dG0GT4!SOoxjN0&qj82CTp%Nkq82*>i4VCQi#dA%Es`a-PE#9c=1rm{^7C3 zJ}*o-L>;p0(-^^N=S<3wTq3(S+<&uLRzf4X1qq^Ahgg0*95SiWuceNZM!9lgPcBGE3m58aa-JF7f#2N*T1Xi+^*I6cD{KDRbVBwS9u z(oNS7*!J;v7>(O29j;G6DNjc~BahN8q}!-eOk)Fz$3Yba$6-mkwRH6SIo@kyy`H=Z z6?mG#%``5mgaJwPilpejX<|XzI*jxn1Lk&v3avUd^`BRhV*8k+IA=pvI5c_Jwa2kk zla4i5GhI*-`_u*%c`vuB_aDL7d9Jr9-qUd#goM&td-&20I^(k)na9T@feNV@3qwh9 z548w>q4yAVG73`u%`9&r};4&{9xuwU;}d!`e>@z)~6+I=VNBku1zRtkdT#gh=c z!IwmS>K}GV6h?jVU~T9NNTLSwM!E|U=O9D7teM6z8}xw*CcWYUdkPBOXA(D&2gHqZZZfP3TuE4c z$I)5Pm*6rMh0j3E%?b-GZRs_}imW^5+D=BTcC1p(G!z_xc&M^q+NZ-kxgM&Ovby)S`D8b51PtO|QUmkP54h2Bfg_V#0V(v+fO z*;9k=#0j1gSl{Bq1aB#b73MHP>3^3>vU{CHFt}3lW3|gTY0e&}D8pDv9-6e3Cv5Dg z3)rRN53~>*xlZwCi__=x?d{n;tItzX8m>HVb5{AU;WuWCzm2e#+0mrr?!Nh=^+?*1#Px$t5Q&TY{k%5JBfa;PPuR;>kgFgL1@+ zg2YsYYW5yT+YVcuh((xyM<h0uank>DC~DAs|@81yVtzisxv4Du9)n z)ay};Bbw7=58x@Z>Swtb@+Uy_#d1OXy2oRhxDK)kPR0Dux4qS2phW8EAAHUHZ#X00BV>MfED)L{e_a};eWDjB#0}#)sBd=P zA@KDVv6~oG95#hsIpCWA=zbXn0K1RC3x*J^9p+fb{^Q!?VvZqWbQI=xcu2LFF@*-! zjlsu6;Z@_x9H9G>{a3&Zk<4iBjN`L_V(nP1=Pih+-)AWFSD=lK_1>|Z?Lknp`>#)k2%3HR z^y%ZR;r6Woo@8)6a<-A2`vir*+>JnjF&e&{5gzO3B+eN+i)ZW4qh*dmM zSUFady~B-5|M0Xaufhj|jyb5PpOZwTzq6H#`3_!(<9@#3&9U8a7HUke9(tbnei@6+ z#HDgGgX5V}&d78QM7`L5zP@zu=Fm-YWA>?RMa6GGxc!XjL#&WZ9%)(AsaoY$1gSy} zkX&L5+?F&~+auJUlezQ>Oh_?H7n?|746GGjRX4v~+*AKH0LPz@T=Tc+j19Dl-r*xq z&~yxtF{y5vHB2j+wq00W?2LO0j`Vz&EoTxtCrFQI%EoRq!BC05&Qd=|)j)P&6)F1mtm@5|hNVK5;qw?4a=SL+I0la?|cow@jG5g@*5d(Nc4%Ns)*|{|syQ?%hkU!&fSbgfs#Y zUBqcnTXHQ+{a_<#6-S*KWHbtY{g10gbwbKv1a-a=c1bQ9T2D4IoMIH&St=}$R-=5& zS91opw@)AgK`dt{pr=pqhb0DUFQRj#AtjH=kZP+W+G7rqPcf!+f?euwc){Ip^-11Jfs>V#ps_2 zFDdjh>609>!@l6fsSsI~x@Ul8seKlK1ww97pC!cDba0l|@TB4}Zicry-@##+*gycB z&tUppk*czL$AK?1=mP>u6ar#Reh}%=J8{%CPu;ZTU_%o@FiVw82S^NZ za8Apz61CvN^d7BuNdZ3CN=_jSWG5e_$P|{FjTwz5^^W)8^f2%V-fztS&?(3qsy7EPyoG`8M}hL*`mY`Ok0W-mhuqBYZ6jpwIJ)fcBo*E z@&ra{fIa&F6UlrRKbpqAgcLvR=3pTVv$s5e=Ys=nYYynpIG$ui?i!532rpU*St_OC zShh@BtbuU*={h`53)@l*OH;flG%(^LH99FxS{5##wpwK3rh6hw=~^b8TBw~#e&MlA zRyQ>1wHp^KGO{0YK|SfDJS=M;ft0H`onmls}4m#2ar+aqOpdww#W{nIZKSa1c+TjUi z5v~U$Cnu}@g?2h9r>dCINsEx2!9j7yF`#B)GWkoN1o@xHJbiI;HanI`^%k?XCIXUE zWJ7M|xDCpb!(vS29df@6Zy2PN$BVx?27c1e7 z9mS|6_y*1QHJQ!YmXtK4Et9Hlx(>~*Yc(k+U~zJMB!pnFLHLMVU*->-yzY#2HQJ%S zeUSZnPY307k*)U?l)w(LGU#I#2t-AZC+=PLTKSPPzly-U%J${bZh$;XaO*N8#V~Yu zqt3e<1Oct5u6%5eg*^hKMN?laUjG^}7ruqJfCq+l=RCkG{DI};f2E{@R|Gy)H5Rrc_Fg?v7n!+58E&i2{v z?(0Db@a{hxKHRtt*NyQUw4u+1+fF5jSL#R4%~X8*=!c|{9)HfrXD<#K$63xh3dU5| znkf!od-xUXIq@WjN$D#@Su#^l`eD-9*|A;AG=>vJfgQu(Lrgs~@2Lg{X$-LC0}`4z zsS!>_2I6bP%h51OpJy*|r#P7t4UP?*i7^@ZiHQ^-goU#?HHiV*-4(G&${0}|%`>8r zuxnyZXoG!ER==qg0=HGowyi)*rn7tRk(&|pvPNg}c0$hqF~V6-epKqcsR0|3{(58h zDy4+eGvL&l)sGTU>)4sU+`)NfI^g$x*7nUKEIj)2Mz~KhPlJm)FkYGvjd6r!_$<7k zHOa%9y2H}gXV6B3;DgI8t?gq5);dCR+WN^iTVkJ_khY3{NqGMu zbsgN_aW{nF0Bsu4q-`A|6_##O8izn{Nf+lQyC^0P2^`XCp(<&IB=R|}s6VY3qwuQ8 zy@kC{Jlfn5mkV6M;iv4#T^?|4)ka5MXhEdsgpWlP=*Ao91`D0u-~xxx(2qmcLq#0z5Pqp~K2WVn2 z48$M!Z1{GNWx0^354~^dj(px6YgiFL?2q0Y@ek);1eZnBHc${MAF&p8?6gg~N_$dA zRk;8ptBky)XvgQ!9wp>@a2PSaGW2P7NpdjvjE#T4_aad0pLo`7SlOX`6f*B+5!&zaCRTz$(y^(o@deIufD_BnmI!c$Jh>a+x zk51hfB!RqayRZh%wm}nnk_b=npOp`^V_1PH$@8svBIRf49+En~ld_pIh~(&PZc<=b za>t5eai3BX5`p&O5JI#|mV$p>kl)%gbUFLiJ-I5({-`)(aiEzc5e2@BSO?g5H5$(- zbH?Y_+ecW4Q1`)2W2RWn9)5oNk9Y43`t$BwUlK{RSOliX34u@_Df|9@pp zr+j*Pbeu1QD5cl!HqRdzupf_zF+OzZhzw`Wrl)`6*!maAG=*=i1zkr0jiy3@CDe63 zg!oeeQt$R75cb&NR&5;9k>-?Ik_>MZBp_3d&i}SGmC-B&y^m=JEkF|@gX>;#sjMbSQig6WNpyqWM;@cws1z^FZ76eAD{c&mRqw4B`a5=z zN}JqkYZs|VF2SagXS5t5X{q;?V15EpO4%SR0<;pIImC|z$HuHE@74JXP9mAgh8xxUGN_1rVa?Lkf`T0LH=XqD32X#8CV4jmsCmNG_K5 zk+Sx}uTz;M&lf@Co9mPk;SH6%SAq{S7~(G`0~6Qb!Z!`7Dva&?MHIfDoD1IceZNE2 z0-OJlKm=~GdZ5@PlE6#!wz3UAjGbc8=RWswObu#CXQh|oO_Ym$sz%Q>Ai3Ito&AnA z2siBN5LQko{Efe0>( zc`p7Jkk9yqk>S;hLz<-Om19?s7&eCMHzl>=*l^?K&I0Y+wc*2?06muLk8YB*NW|va z@SB@XK6`EW_~vtx1As5~4)uR-LY`pZCc16MD#0XARZwxJlhxX;naQ>@bvVTkQ4qExLh_Www zR0e4Q8M?YN7jQidiDPI}1ay#bdwuLHoqeDc2-rZ&2{ldfa#W^#vHpOV2xDkVr;y6V zv50n?kX1d0T}DTZMjVm>s_WW>&$9x$f=-NhU=_uzyw7c6`G5u`4hTp3!Z&d7)ndLc zR6)5zvEong;SNz2d^rj}Yh3iI3;N1j-*0ZFtNT@=Quq9hb~97>BaEjCCudYL`G}SW z{%}Z_g2f)`PMg^yWl`5Z`@<9GUY4#)hbVn;Ap|Gib6~R$7vTUS`H)AHO~v~*+Y%fe z>-v^BxHpGO)5>@OgadQ*8I>7if47gmkkm?EzDH8WnsDn!F)E-CF%P=R<9N7((Ix6# z_?kS`k0jrLbc6KAIw&AT;&A!KvN&k1K_qd~N)Cp}ltrhd`G+3f4TnuH5;CxyBU{r( zp<2E1m;#!s;-yY3`hqKS-ggodU9SLn!&KbRu(v(3U?und) z`BRqIb2S2R;P0DA5*eWwpS&e}l|w0M7{NtdVIB17Chx2d!xSpVz3{m5R8ri5l7{At zCJArCu*%;MZg9cnY78Em$A{(?`n=)sT^VYcLq}ih=IpaBd5<30qVM;RMx|yEnKr9| z)WoYPQ5#9C%qGYvO82P~34-^in+uFSK4itoN68%;Ew3Z=+Z3?b;cjf)z&OTG%kxSf zDu*Ti3jeIc&1meCm7aap<%Nxu9u|SS^6pSiww|8ax18XK8c?8%5G_BgVwwdK0lJm% zq}Ha+QQu(rM+ZNM6f8eJWW?ydNQ{rHm!o9;(ATgUh|K|nqtQHCJh1f-D4eJ{Jhm{Q z+JTO(DSOLk%v%jg3lBl5ij@;f**M4bIEG3%sl!EO!=EoK{i-Vs2l@Tbkg%5JNF}^l zm&xQ^G<~;k`%E!3VhR3+&(mEDQG1-JmM+Jc?x?kC6V)_?4fT7n9v7&tiwT{4)OXVn zliBBH7=}l^`)`(&T&ngCL=RtAZD?&I^r(V^3qH4>UN!|jE1h?J;yfUj!xn$2lCtU) z>lk!Ui;^fU7$j&96G+W3L$iZG!M)DEa=R*p#Av{gD+D|y%(Ge>DWf+rFG@@#Yr?jH z!f79)kvyXONgTG({&yhGMP$hSMv$V78HiX+9D1uBaRIIbSE2iX5g&Dzek2PoC=(gT7Gq%BQe=EogZf93yy#; zjs)doiz$1Pxl1{vV!S;@TQhFo=9AL!e!foGUd9v~m zj$`4XAiuwG?|a8*Ndq|`QUtxR^{n=4u}v7(MWcY9Qe?MUAa-k*u1JuUMzo(6#Qwe2jLT z|Bc|b!i(3>cEJnAQcrHoGAMisJ)t9^|XfB$l zs*KsLKAcvYd%wB&Z7Wgi5~vq}!?!32+E;Qis482Ke>$!6I4Rk{DtMZWWXF-B1^BPq!CE|v~F68ZV?MFCthNRah zToN{-AF6(YoV2Guk1xI&e@^g^5(kAhU?{FMh~;T{8fv%Fr)T!~WO2nd1b$?0Yrw$2 zVy9gdsfO{s3P z1+E$tG=6+plp`X^+^S+0D8E6v&GteFT%Xn~^|yzP3k9oTjZf??2OjW_Xwhnqv_kL( z!xcwh^w}Qs#hnEHs_1%=#V2bNR?0_Y^HX`_j3guof#4k7=;B0l#2Q>UI~9@!zAHoy zDy4v4merl)m3z=M{W39e7d2D}7G+?C~Ql>Ev$uz1)j9GaX4+KnHEpdGN2>i3iVbG>FR*Qc@#nAzveJhn(dq~B> z_-u?8k80B7xM?@q?uu6k4T37I=nc>_AtM&LMGj;`z-`B#R2R8jDz9pFSj%s|EAsnY zd-eO@57)&4pR3Vi-f3OZ9*I81$Q(Lq^CiPbzI<{|qBg$nlp6Zqo!a^G@>2iCn40uw za>n9gk!64iP83}4jKvf>_8v0edmdl_uiUYdsy|N1 zob3HD`!{%F*;3ZT`spZyA>b-6M5uKOQ9F*tu~9A}y~sNL9qf*r^=>V*TuoIS{~qhi zU8m&&dxBm1Y&m-(K2iUqD9-P2APOf_u1hi3Q>6fkPO))SI2;+;txB;QY7*3tS~FRY zR=sqPW03iyM|rvkWqct2v@_xgz-n>!kaj?t<$dJ-0Mj}MmCjY-5&Q@^J6x}u)OZ|{ zmViewx}%^V`*-_DT!SnmmIk8BF* zvbZ=nzk5Hfk`b`ci*is3t?w$sogD~56>3PAOJH8P5cJ7Q91dOS99FJg^7V-zO4)PB zCgC%|GFrf96;Id0I+vv28mp36H^1`=`oyK>~rJofbw8qJpR6IkOOpEl3Q&YXs{FOH6KsCpyOjUkYib0P>sNfNza8@^2TN9pWH>t2*c%# z4|RXl&hVZs+#FDzj=JAMED&r75RxCXY|EhD-j}mZ00KdG)-2t-dc-g%(|vq znOq=06Y72&Tc6chd(*Ec1D|$a_&*ib)dL^vvLYozq!2pV!6JrD&6bx7>up z@ykj4DucJy&VOPXWJ#k~e*l%1&QW|EJ}(#|BrRCb(fr!L-m`vCh6~zncq=;s=8%WN zxOsjw7uKG%Ex^I_7ipAaTf;*ICha_fdfQfC`E6C z3HJgW?bf)>;$mz>*wW_CZM*F%ghF>#<*dkzygNHaVjP=e#q5CTe-pQbUBYqSEwURj z3MdI5mgbnv34me)QX+^(A_Dw^FC|Z-Yy^HHQB=ZEi~#WBAT}S$6QhiDqkIx6KjP2u z&696u`7BnD<)ewj-XeRSjLZx-2z*=m&nkTvFmUzSXcN(H|GYUzSX$AAJ zhD6{90g#$triGy7mC%9m=!z>p2xxG-$O;O|;3^k7Q%745Z$xXYN~%o$5buLzyGmbB zPN3sgeJ%-4QN6tsQiQmeR;E1BGPITZa zBBQF(^!5!I0n4k(Jd!3LT9Viulu=$*TS&nSQvae(xthPe*#Zt+7TPyP>L=FX9tx-S zple^$cDVKi1=#Rw^&j6#0EGw4SYzIz>EWEBch{+kr}KKDH@+wp5FaWlvAUsybfwT& zU8(fDa@Xp$_*;mL0L?83cAz8X7De}pmETJIWK~4I3?<;CM3VV%Vck?jT=Y(ig8W5y z6b;~$CDt=L2>>m4WU<9V0qrrq#s#NgSo2=`RbwjcWVfjW2Zgm}S3YbFHVs8A#O5P; z+^iH<=Mr05JL*~6p5Ljnss~BpViNFC;rJZ9sy9r*%udYWw4vyAyO*{5B!uL~Y*{kN zCy}!**hxAU0hf1I&DG*EQfj`>N98ruP3M)&o4EN}@Jk$vDayfEGS_8?tosC>sDFR` zwxYI}Y7PXo2Ob<-5+VZ^#_zEL&*v_hrmQh5{qOL$?n|_k_S=di_`qJ+ODpVhXZSqW zxi`KMyeJ$nv(rt$3nSSbl2jbkN#%JEQkPUO}VAyNefmY_(5C7$Ps7 zYN-@POa{D%x3K``eL3AJ2CJn`Mp*w=Eipb+P$22V&3vMV6I-tPYSpBCR0W#W!YK*7 z0vkyLW%(*&s{!Q{2VJVqAfF0C1CfL?DosjGH;ZB0#czr5E<#_!4|jZevgSS^0JRZz zQ30vu2vD;3@*g@}w|_=N;HbD$A#p3t}8P*oqcTrenO39lr@K+DnV z4>B}Db6L?jq5xV*nh=;C$uBMJc}-co+L8o!h)l-*jYAp`y~*!_{t_Ml`XygfjP)bd zU&%1>;YXyHps~y`!E)*#qmJg7p;=xLQ{S~*OP2FZi)AQdJy!ByhqBd+7%Nzs?Ukhq z2x5G;i(&7luRc;07p4zC9)38tt|js5v-e(?;X`h4`%he!E_2963v(AwU9brTAbtgJ zXvr8}8BCDCmoP&bxhvz~`%m)5hkbgHb6ejHDs>=kT6^5Uz2GLsI+`U`Ht*dB?VXU5 z;BHjt~5Y2O@UUs6>SG5GQhi zNGn~d^j&d3&hmg1m2v|JCt`!b-@fXrSn%ha*1yAQ|3dSBKdg1pKAy(~Y-3pTGNvF; zjJ9yRQpnsWY%f_9uzb8fuJ}(~;zso#4j0WGtat$o3r?+*Yj<0XC*i*!iZF@!Pb0j= zFqb;v7lPlv@A(zGG~PE6zCES>F}D|#GT~gct3VQq)Oz7|psa(>UL48dq)Pa_z+YCf z15=#&^Tp}wGyp-Wti_=TF%@RL?NOqdx@y(86IuS#yW*MEa%TIH$}_wbq(IUOSYRmo zloqJGg4L2Iwu`5%RAPITU4-t@>Q3e=Uo$iaW_01P&$kI%7uQWOGQ?l_igK=YJGrI0 zdr_!k?Q9A6zyJEG$N6VR8STkk@Z^ZBURVUe*;J{;l}pSFi}+~b@^w3TDiuYyYTpuDe&UK!g?`l%II0Q=RPd`lnKzluF?q zL9)12_*L9eh>sM(b6K+Uy>tzLgo$EEz8$eI&vS(e9KG3${6;MgA?0w^w@`cTBlJ~^`*|wug=&*9MJCBDyQ=k z2r!d2C>85DMvg?}QS>u-L#U#kl!B%yTvIj@T(W>1IZCoMiXsH;{Ks1UK@OG_IE?3R z=?ESvDhOwG(1=2;^L0BTSlAg7fhwyntYj*xAZ1nAV7Kspr8Z8mLIa~37*J9nhzspH zZ@wx+{K;szti1utA+c?36;aD6rP%NuIu0zT+5 zUbHC}f;@mxAmWp*cBMY!;CfyeU%&!O-~zXe;@P4MJ0so!!Z+@v)MI zN+TkPb)k{MpsMQAAwoEgWP&uosy+RyH8Yv42PLk?r45&NP$K}!eofww4d7jI`no=| zB&yT8w7DfDE9V%kB!G18(ij`K5`X|%hV93;o_SL*zws5po3fY50OdNnxVI1zteVt2Yq^VrXGJgYf-hLnDkwbt&Q+vMp>@FzaC4^i0|+ zPZE2JY<1V%%=(AO#<^0Iqnl6!~%sgF{>~NrlSD4(wK0t7tmMNy34$kK`;uD;hqv&s>DSSItdxZ`uRIJ(}?VLPG9*_iVM*tcfnI>uXD+2W( z%4FsV#VES5k4SS^6E;y$DLCZiT)Fr|0TCG+F;^LlgbA(KkfXkrH}oJGOskRkbk2R@ zmGXv`K6?!^vKg_9>^&=gVeE?hLK3m0B%(3V(` z^Ao0RGln-VS(!ByLe9n!nfT3Ks{<==OaY++!44Gj189qV1NfB`vTqRdL&4YmPT%j#`}2a=<}{$R+62zC?o1_Kw2b<4mJy)XSDq|p(PiUK z>a{**+M%eDiz3fsi2C{O!qs05zx_+JC?tUP_QwsS1G^vT0wmyS?qgGNzmae9MfXAE z?=C>GI^waqdX{dKHYS7E!>1e#o>DkeI-_XKjUi>j)jB+W_|tsZet#do5j=Ryziu;h zh>*|VMBe;HFs%$3JA2>n?Z`(XS(l&i1$m^`wI;|P(LYWy@kn?fg$gokQj8xYqA!Dm z2O~J@D62L65D`2X4Cf|TRaH7YlgHqhQ+~tpCvv;*dk+;^S|yS(P@IPR3_%H~ej z@Vo(q0b6FI1;Je%l$?hPDf&6su<>G71L>Rh5}Ue8BreA3tRG1gBheD<&9H`QuwpKR zfO6$)nKyM6+PJih7rwaSW@Jn$&1S1aKV8-bQ;YU4qL5b}C8;I@W}$KQ^*Im<49dLl zc#@(Zr!g%iZ(P3M^h6D%)loK8BQ6BV?nUQ?HP&|0)bQ#+JWD)db(vbITmisID8hDb zURodSIIC4~LaH@#U+6wxNQiw%#}Yft+Du z=x?jQJ{tZWTS3053lsytZ&n~6?7ln$0Stry@tr^+f`o(#hdSsnqU@{FF^UG@K@8B< zWJj1Dx`)SQWN5Di+m|ICOIhwxuRlUfsM48@?K;3Vs{_3xe;yK=4l1-mYKWRj^UqgX zzq)kkPBAPB{NZp&z=$;lZl7RTy>=sA9|^U7+|3O8q# zLHTwxMoX?XBRIXrO1)R;*HkM~Z(Irix*B1YiHl@;z}zG97spWh{6r^D(W~6%hlZRB z-&i%hK)S3CVb7ImSR?G%3`2iuc$dNx7RF1R#q%L8$!Dlzwkf@SS$r9%B2Zn_OC*8e zAZ$!gN)71AcO}z(XPNFhSm%hNdl&WrTePezsn_qu|A%uE3frG4ljQ-3t=URL&d7jF zv)r9um-lN%qBf@VnsBjK(cG8g&EOdbt_an__}U)H#w=`qS+p?T{_9JD)L|3_kakgj zTUfbHuZVA6#aeS^+lJC7JG7VFXc z1Vzs^j{5PF`SIpf00s6KHjXmx_k$*ueaV_pR8BhV@7YhIKcswuIm6=6P;6RZ1XcKY zEWWE6-z~l?2a)CPZ@{*l@9u)hti&v!kPKDf1k|k~5t{#B5?V(0bn}5ppMJUC+T5Ko z;oLEhZVLL+Ci@G_Q{oYu>**<@-`_SD6P8#iuZ{g`xXfv6HnCX|%XWXLkzyzePl1(t zd1nt0)j|@*(sU=h)O|>z7aZ#g8tBgUsS_A5h!wB^0>po&Y#MY@!|`^EGvYe6j12L_ ziuVjLN#~^4bpSOt5vven2D;8E`3pA`nWv29Zr}|L1F8Y-L&vq*K@iQ>Gw}=KA!y8? zFmk?L?35lbt9#N5_UX(sTm_U^KhLQGhT;sqjJGclQ^l_fWOm!!dkV zklF4TDYl+6yJX8#LzWr9tkR*&g{$D#D3L4N4^&!OKC@LNDeW{_%+fLiE6zF%6)aX`4d-- zi0*waqY8ZLDit0iwGJ)Cp)Lqe4rusVh!FhVzY~gcb87E(4j# zsfVrN(*~@uCD#TepLUX$vZ6OQXU51k-bddq$9+2(9)U00+C2_4!((Lw(qEraoz=>B`Z7c(c2}sLMT{Z>{G$4d6w9$-gN6+S9Zf7i+9# z)~O71XMwTrF@XqW*{|)}MLZj@$Zg)bh*VBeZ8X!25fP)id63w1Wqj4DFFp zRx%vNf>_^IXAnOM=Qk|oPMBGnr(HHu*cisxxx7LG_qnW_mQeC ziXCc%C-lH4Be(G;Gfw-$H=l7*9%M)l!;Gjf4Yq42#=*u2q;kS-Xk$I@uwnhZIxB{w z)gEKb*kN+WBG03;(zc__klXhI_OR_P?mE@uYIQ+LOZJ_kx~LB5c5ml*(=Hna;-ea{ zBNkaB2pKUNY?5^yR7~r^hTx6lx|>S_~dm{Y&Iy+&~z4h7Z|aER(fV*66aqj zpf!DGekaEX-Gw3<=h2PpzqzJ=f2)6g<6Li#Zg8g5N?kd?m^pQfJy`@zrG<=o-wi?J z{OZS%-GPlhBg+E~blQ1g7|!prg&b9_HpTmw%uf*+D7HISvcL;}v(R2zw-28>A3o5i zhplhC8Q*yq@aJl-K;M2)6Asm*CM@HC)StOq-E?$n+RiXgtq)!ZzA!ErJa{r=l|T-H zg0Jm6VDLx}ewDVpi6kqDuzEJfiuYe+Rpcu7YQbvp_nTM&285zfm6mREEX(y)l)hE$q&hQF?!n7|LWQJr$ybX9 zKnja!5LGF4irVtsdcVk=Or~@cETI?6(f}7;OntjQ9Scvw0okB|w#J#b)2QudPW6|W zOkh_T5ajHLP6Tg+Fp+5RqO)Qe;>JVGD@ZU4A5bFP=1JMvK*{OEs;A`q90By7hl7K^ z{>SF>um3Mxn{>urA5a7dLTz*zO_I}gw7KKw!`k(Y-+WB=*Rhg~w}_h?A5Mxx4B<`> zSQd?kpl*h+$@QYlhDw#%Ih168)J48+njT1;wU7bo8fgK+v$Jh9D+ibl(q~rmpif6V`%B)WDwFuF)fe53#ZK#HwGIVY9zBaYX&TAOI!#8Q zmmteOeK#^ANXc`8GI8T$(@^eYlrrZ}=}|P?F(WEWgOq3f*gTrV<(7J&T?_%Yv)mWC zMs>|}j&-Y?8VdBqp$fHA@qgS>rduQtLic5|*nQDBt>Qn-4`oPUWV_UI3W=tB>4<833%9$syj{na9Dk>aTmUUSlcQ35!}Nt+7=4J$boJf%#4G3Wj=D*UJBFPS7r zukar;mqtP!U>wxm0nETq2{hAOWI-#^eQXS0D0(u`VAvmvTfM&VTYs#pcO>p;3Fs7c zjeeCOCNZN&Bk56bstfYM7F5H{2UNQ)!*e@EcTtZnj>m=3Et8VonAk#rEmBcu`cN^7 z!Kuf7HjkBBRT2b>`cf}rb~tR?oMjFSLxFE%6Qgwkc|45J7NDjGP?2VXSv-3wb~(N= zpXI9&9IlFylcYIOP4S%NaxW@MXjKGtKeHIm49W{)9Fb=v?Z9ZtOztzBXjU~Pd5a=@ zn@aBy`~!E>3oqr85L9eU2QBZW8h*=vSASRBwT~mQGe-yVd=Xr+Pc5FfNB~Nqxcqu` zDC(yclzD=IybedG9VXW-d6~UzsbgE&9uLC`B6wVsqrhSB1E?jDpj!xJgxyDx`dDBoWp#T? zs>Gc~tZV|EY&>n&s8O3f@`2WpSa~ro`J36x>#6_LeM|oKnk6<0bW%;l`i+(xfkNTA z?R~B@g=2z)ep!S7bx!s`e;QHRqth`_%zj~osbk&vm3J9-zz0&BnL3W9tP(~b%wW&7 zH^Q!c26OM(6Fktu4YVUxP^MbzQ2Pk`+b`GvgIa!_Jq^R*qzRJ;dIZEgsqC=wiuKuf^(_;^FlS#g_ z*Z#|&({n8CPn>Fg^mF=an+iIsY|#sx z3^4~;k)fF9P{VWW?@ydaH=4<08b8Q6a)-fw0o!?cdoJcCGV{k0oImu#yAx!tQk4tuSNL0}5aK zQ`X9h;BJx}wcOWU*9#X8?(6ljxXX*hiR&Mu&~UrgH*WAV$9Ld+CXmB)9ndyl8Hxy5 zMmkwtqB@{@m4(Y_aOU3KLWs|Q6FJfX{i_OU_EbRPv0hc}#fZ z=tfA^dY9+C+f;^|*qmO)mDpY~8?md}=_Kvh=9CXN$A=gjI(RrQ>|!FmDaTpA2WR1jOdlOtiv~ zEXk<%FEZT^KeT^=L^U|A1ISF|)=5GUHsa<)Z(kmAwfk(Ls|$#LkUh>T!3QGKKAj4} zD~tfVS`-K)V0yS;)3(*kcZG3RSo)b0JOZeUy(D(B)vcZ-=?FG;0qRU>e2!X8t#Z-f^sm_nLoPgWCQ4r^+) z0+ivzmbnJ+mB`b%^8QY#ed$~Wy#U^}2!U(L$TWg3ADnZd=dpS4sS`Hg)sgt-l-1wLP zRA2xg@3&tTyEe*Is@Whnrk{LaAnA1ES<^JFgb{$Al5V%0HXY-vLX?DDpT21-%V+@_ zC+Lf3(*-S^76vYqn1W{n49cTffd(OkLxBR_fe}{5)B>AgRHaU7XUTld^Ev5C5?Es@ ztDosk&$EN!@t2Q+GvW(lE2CLy2kLt(gx_j%YQc_ZIxQiH`h|doF4o_tnaLw!KP(u4 zG0Tatbc<=Im9!X=MUh!=d6K%KU2ilpL(07fogo(Mim`mtiW?QBJ_A7VO<#agiMQ4i zg>CrPu&2+tEkXMcEh^!YwmEd;pf957jNe-80+C3xmSYetLsQWcZiZ;xj--{pr_s99 zt-qAnE;jt90gRjtl$i$N=`4OeS;{-ep%`hf*|{R$xVXZNyEA@-E>&0xTPm@E67qYy)y%xYF;G@cLrjs#xyoI(;JC8SVovNN;yRtQhV!u}Ee2-tL7QkIJ@uZ{}p{UV%yvd`52KE~?qoITcM7nUgxMgH1H7ad@S+7s-`N3NOPOQ){T zx#{v6vSKD1seBJM9OpjfL@EvgB!e;X!)G%SI zOj@ujTXm|mR8RTGIji_}fGe|@Co!LzN3kKuCE*7k^r07zCK)1!FUW{6e7JGl?hrC? zur!M8F9xL923eryojwq@h?tk90vVj}tJja*X7>E_Nd@Xb>Qxh%N*gWCFae;@k>`oqB>;JZ$m z#8ll@D1IF6`=8;z#h*m@LET)GB^@>Oq|+eZ7^v}@QI7M`vHp*H)AWNC#!ED>XjefW z4&$nwWm(@#44Tpefqf@<0prWFxX4oR4M}i3(`)FX#DVJwL1r>kSqd}bm#{bHC9+l| zxi_&7pr;@}If7y-bcAM4Pv(cqeRf#CzF)9xSXE`~WxU{X_7lcm>Ny)#@n_Zj^vXP| zoWdx3rGj7%sq*2Mtes@*llw=UXB~f=jb1_P!k+j0bogpx_QhupKfnFQyLSfti973*+T@uT8w2Z7>Df|iA)7C9O6)vM!v#yN zE_xfWa*RUFFC(-)7r$V#qLFf@x{d94ZPyzF?0T?k}+1kZ%?R|pA?eop|0|29+jU3nxqG>&befgUHbAVN(7 zIE-ancb;0ciPxb;wOmPdu+hJ!dcAAyo6%`jvxaK81#WIV=2n_&_=>Fn^8m#$v@A(x zIU%g36N(0dWZC=mu6o!R^TMoggXc=g!TAzghqLfeGBCs1!Tz}-Lg-Fi=zVwkP^Ph* z{b|0B7YXa-lM1wG_x!sf4_Qm8I(`Z|mMEmA01nhMKJQZ0a&x46mHmPD^i68dvjf!1 zQm^sNJvmc8cF?q(X5LXd(!ra;&i=GG*;XQ{K*I3F?-tw<`BH4MY6Tf{eGu%+H+LK9cmJ{uW=8DuK((*_Vo|vPn%k94)MIhY3T2l-Q{tE7&<+DNl3O zHBTiq8L$rv$(t@U#KHVT(Y_qLF&}s7OVpKEN9_8Etzs;GVCZ4+8*?S41femqA&JJ| z7scTFCL}SeR)VpXqXmNXEPOBVXL!*KU1WJHQge>Mc{!|KM0@fO#g2bN` zQs5ccq+?aG-k}Jvnr;u{d^%X#a#JFG^~GwQMbI*B%_F5Odvn4q^Pz^qBbaH6V59s< z$VtC$2xz#@10jwTlr_M;Hu5y4K2CGkLY^`}r~t2Rwpjo;kjQQ8aUuiDM;()g8V%!F zIFOcWroV<<0}*yX?q?}DK+ZV<1Q2qd?^66(1%}HP0u{224x7-C#2Uyw)N>D+2^$6u z@TvBY(<-nqG15^q-$rWWI>lu5X~%2>4K?$f8t+Va7bcPIrqyf(QKue(oAl2Ck81Up8Nle99MzVoGz^Y*cDA?r- z&f0hjeYDMMbkuG?F=5*2OoB)3$U0oFBOB^cEQ3v%;RO*{)E&<8C3wAs%2;lZpa9nj zAe0$O#6Xc=c|^w04mA=~TB8Q1gdQOo+lk{@_NIefhZ(tCx+2d>v|$Qeqj>{hwsF?X z+;|l9NgJZ4dVGe>-Nd3Z`FCL>d3Jt6m+Aw14JsIKdhFKE>ol~g-Ey6P6q}2G`l!Z3dQ69j^(|?^E%`@za8$cP9wj#ihtO;gk`t zYuq&jvROW!*l$4fvZpH2vHKz}6Al7^+U(75LJ|eOvD+Jo{IG6$EWTKEk*1Uz0=AD{ zkx;L}9^?wVAO$RR!}&1S7u2d2%SPzK9}hg8FkaYw#|9OxqIXG%MKjUj(GmRrT=(*X zr?}TTq_)|YPFJYIWUo~^OmhlD`NO44pS1w<$gn8kzcWiULyb?3I3LU!QtX8fROU$# zY~>Ags0DoGinIr)AEnw(c7Qr?=QN>9a*i;K9mI-iu+kty;6;bAQ-z{p^=_xMklmbp zX+;EEUw4x!d#+qdXvnb$1?@sl5OkJEcVEJs#r-!kuC!|g)KbTr6OZEoWa_%q)e}K7 z9bbcWyNsz4z$i>DfFP)Rg=CcrKYcM3;;~W=`>FNc?giAb5rcBQ8@k#?b>3hstzdA) z{fy-&1@gx1tDm(TUoDoiuYjt`D&XA(%eUfr2>lJ48=jd*Vm2S|AcSMS2ED)C*~_8 zdoU^ByK(_F^=$dZ%L6IA{fmhZ)cP=m+pC;-(#`^^=%Q|Ln`*2ou1m{qj!;u;uBS&g zL|WuB4C-7~7C9m~`?|-=xK&;!Lf>Q$>-o{leh>`yx7P;6)9!zlc|pIm*LaKBaw-sY z|BX&MyuiV+zIaWcd&iu9h5Fi@mMEIO8R1y)^`jy9DKb`67JG#Xe^uX1o zCErPLNOFeUW8#KGc_VJWGc$zL@31k;WodYeli7bw_>v?k?S#L9{Dcf}a&(Xf`EAw1 zNaQXo-JI`0K%o>LbPz9zWDatDS^4|J>yP0{@?w$K2fryB4V21mX(^O321~*kMAeTJUdprUFI^wp?$g%P&Vi*F=mP-873BddNgc=v ziIPHidtSj0kgLX2;D_&@@opkJbn)pa=*&aj)ad?ny%)SO8 zKj)auzTVqi|9ZYV`}&C8**lEC;Q#o+*Po!l_e*}upc8|#QqGEB(4>;CvDOts-KtkX zelrVG{pF1hpW|LX6BmkYN|^rnoE6xa1$wtzm(Oua*}bweH)p8YPmYLn5a*O>1!nUT zVi$sqZ)-FY^Cs1^{EJ9SJ=;FRmskuOY=Z9QnWfGlmWD>X7wI866Duqhyc;8t-RBAg zWnJ&$#m$A$iD7@M*YIZVtIqAN=VJw_jSj^Q=F0O9$$j4&{0C{cD-BN-xqW#R724S>1G8F(_Jj6yWPEkfkiZiq=BFk_vIIs#Y1iQ9fCg_akYmZ@ zgQaf5?HlDF(?o!%KN-Qxk73Gb74T-yBtU`mXS4rX#(ulT(r-&a-0;4jzTVa<+k$kF1(gwtA;>8m_fdb_#wKh=)Xqfik4{D*## zF(v<~P{FnO*ScGN94=mOzTBN1iuskOi5WpFL`>&{$91MDQ55;C5u5zAoSCUDrT6E? z*0Z+ScH)?!sDhTW_{*7>IsRoG{RAqCA;sC4wUBVubwe4u#)7@W3k$4htJ=$1e;-0> zX=`7CuqKE}sU{3ioOJ$$0x(n^-g?6swz_s_Hica<2wv!#7t0iG16C_6c5bfJgnc`e zZ{qoCAYuF`UK_BNv(r_V5oK6ZVn-CbCnsEPa)$O*(xOOP!@@i$*CQ_zBB2${*n19@ zRNb)(H(Q>(_T76lF&3xBc2dSRzBt;M7Re^#?oae+mKd=5XnWBgoeuEqC{J);~GhU9LYpqWJOWPuFh?pF;iC z??7p9k^tz&Z`ZH?X8rnaha11S`O$Cw@j5wTsJQ-wd{m;67u5Us=Jl-i5QXX)H=o}` z(|PI9gGYDAG2Ga=e(5&sEvSE8zAZO#;{M@u6NY;4@ONUcAQY#+|KjPr^?x4g$yWzr zzJ8a>NhQME9R8Ukrk5UKMqDpP9tF#PzQ1_61d53^dw`+}3(Vomqv2m(pHcX7{(tXs zwaESkIPrh-X^e3FDajgGfp1V=qPJB z0*8c>nR0%nKOVc}S0TQGU7^O3u0ls2YIgfH4gb$&-6yHMyWj=r^#!s4iFtC_Dw9jon*NfM5E~!vo7tu) zrn@pz>^9CGu`xp=xi=@T)NB2!3{r^@Ww%Ll%k0W6tA|1knqA@4jtZ`o$D!^#SKp%J}@0yUbO*(7%V|O`cu(6i?0Bl?NX3?8;}-f&9sRQVz}~IJ{m}7YtGzohT8b5AvW$Onc=d%av_e+B`O8{Xq=A2 zX*XscUAZ&EgXUB5AsoJK9@e*5X{jYcx$}(U2cqAYee~#FoFj;!w@hdH@^bbs!EsByz3lY>+ z@*5pmx^Z%qg(f@YGQ~e!*wrsIbawqeZ}44b4FBXzhGtpgiFejA+#nMk+wGb0O3fkp%?sF4u^k&c7`qt>nIHO7(O+ydX6d_HTEbK6B*5k@vx*EK{+$kSi*! zDla0UidEKGIBs_3j%X19y&#T;+Xkg&=qa3WocXurD8Q-)L#21=1L|Q53DeW}(thr= zA9k1@9!b)ycd)1tZ$@UM*{z6&1-@F)NLfF@o-Mwtb`e_-Qz%P!QPHND79wy8v;)N{ zz)>MO*jG1jkv0VuskBTCSb3h9N8X37FJ5C+Mg@YjNb2YCjVP~ueICjKsUjpiq9c^Y zlG!expF=rbEtY3~ny@)#99mJ>hIIa;<*upB+^{+uB^{kV(EZLCcqMr^EB{*8=R1Zl zLbN2NNYm;-53=FKdIyJ|$2Z*qZxLd2IQ;pmS^QA{Mm*|T51Fk)>F#Mpm9@>V4*VZ| zVS<6nRn)0*vOcm$LrXFv46zzy;p_`->WLNA!KizcC|#*2@-)XbgqvtoX3q|HP<`^H z>~(*(ziU2x)jxb)4=_%Of=rNsufN6qOSB1=V<5|p;lEwRl+jxBhZG-pEi}5|5UdmX zIwR@P35#85-hOO*hcxVnPiy(T^Ke19THI0&`BV(U$TSYFFE8$hBPOjp^dvkL_EUgM zM9jb(vljcxVU&uP2oP~ew{i6#D(x0aDWYk>*N<|Nc=H=px93_|mqOSan1Pa$498aF{E+B*srpf!FzTs()>@XsgmK+E4> z9M5j)LKlsd6+#i%^4dU!f*7!Ml&?!H5i2;F+}WNLerK@Io4zdcd#=BY_nDL>A4~j!6u=yU-wPs!&bPlh@4$Ku{=m7nxu&+ zSq7PvlZ>?x+^I!?$R3|T-IMRRh)c*>}@`YxTJu9<^Y6Gv;jk0$hCKpLHF$UPXolea7}_4K#`|j7DWFsuJDWacB04BLJ4e zEg<-*R7v|bU9%EOHcd52hCOE$Z0N}Ydvx`Joz0jpN0^)&K3M-}&Kxi#>KFO8@)pw&Mkdo@KmJ z%Kdt2X#ftro^{^G6ao<|P*T>4+M<1esUm(0xL}Ro@8%u*TAUJfoOE0e+r2K@4lAl? zB(s5VbM~f32V*Q{To~RhYiKPuKmX)kH&Nznq7K}A{N#(RTUT$=`pWlKO%Cs>50>h;f78-8)gCqV)A|=S0-_QMm~W8(RBVUi5#pII%iN8iLL!OAF2&S16B3swpw;nmZ!8fVzNnQn=>>7IE!tSa`Ev<8U z*I%%P5*bN9F{aNS^CmN&mibLKL$hb*GLZYTsdqPlYq~wUF8o@VV$eP8BidJkr)R8N zgyKxgDguSlW1$5DjA4;gMCXBhIe@fYs7HV{Sb|HPi?!|8!#9sWm!D;te$xL8M>^Ed!2Rt1B-V`b;m02}h4&mE1 zl$Kyfp5!^iSP2lQNw=Iecwy)cu6TM_6)lL`KJO5~7ABPk>Y#RY9E*Ve267y{s2e6hu#jE4r~(gT)s>Lhzk0ApcYpa})+C6j$Rq z^(bTg*>M#nNwbHNS_AH25x=?pt^bDh$j7skoL@63Y6O7u#cMcNu}-*!bRqn+JK>oi zo%yl2#5;@Ub3A0~uW@Oo*)&~kFKwI&K41KMQzGxNUfw!zpjL97v^%Kr0FM#}%u@jt z?2K>%YHG_o8L`UYkG7~W+C#U|9Hxt*pd!rKcE1mePdbjX8z~u&-s5p0kf7&aqm91l zmQ$R_sS9FDyFQ)n>I?iM+QmmcJA$v$FcgK!jYCYr$IhlS4L*}a7kJmh?S+(sO2kRWRSOh zLIR28uzw36wW>StzRYz!s1^+5m+FTWE~rvD+NR6H6@=9Kjg(S9-_KyU>Nb(jCVj~z zM-dnb38)yyD(hjW!3!g>^Gy8}{IItnN5)aPCh`Y5l1U@+YyBky@=r!@}WRrLL-kYwv>wGu7xkCmh14k)Z+% z)MwmGJoeJkRp+`_H#Aj7@qr{W^X!Y_sMw4*0llG>c&|!0>p`QiECA0)P#DIc*5y?q zv5%GBOmhu~LV7sfn}5NxC)S-|$he44 zuoMY*oMQ$|N%KL&a&5cZ8xs7y1Pe}un0YK0Aob3 zMhW{Jk)|2m-yT`EqN%M+(|qj3Hk+79hyLwsfw$7D@PVq zgf#%BQs8&Ni)o1jBpldlZ6=2&!xuF!Nt9+$x_+|B0Je4O((0tpwp4vM>%xSz)=Tk( zL+J5vZfKLY?VA!+3Ntd6M$iF#5SOxl7+}j2Ivrfn5DVLtYa2W(N2DlWscewJ+B!82 zt7a|falJ&H%4JbUS++u-7jn9eryj#{}kTmtGo`@BAoY+~E75t7@rxKLO(M1(e)vMwvlQK-gN zEr$(vT2VV-A-v=3*K&FCiM3Xq-MM`+C8d?0F3TfR{0Z!bKda_K)d1B)y~jVV4kNkP zowG2uQ&ztur0v2$&+ddCVRmuhp3EW8JFB=jH7QpiK270Ax>EO z6}}f4=E@VSR-y4o*9yRMRl2j}qd1;+!OcVVdenuez6DFb7V`7nN5i8(ek5uT&2ZF@ zb`P;pEj4~V)III0zFIL?*wu!A`{9RSi~ozbbnzH0hGfJ={_&|2#M&4TuWWSz5<{X6 zn(Ux&R@W}#^=<8H6Q+7aeYR!TWq|@=vTX__14-o4fj;oxw4@Q&#E46VbCAnDwEzMn zyRv-%ta8Y=kw?cQhGy)vbqA^GBoi9VM}MnVPAOBEP`xo(sXZJwX{~TuYiDm&xMHnQ zi?Pk62z725y2fkl|ZWxmkt4R_Y~r5bqKOWB^juZ zOxsJZ{-4^`a0^H^Zh;>POoVu#3&!T*?3UU;0b`?@A|t|O$}OZtw0fw(HME7=oAjs} zJ_$az4@tYLCo>E=+#gv`E?=5f&DR<&(vNjBh6J4uj>FI#Ugdvq(liLyMSNTTv;NKYlHsAtI|@4$s)~!K7>s|MQpWI2K7+N{>6o4 zMDELD45=l%K8+EacFv>>iJeio_ATQw+G9E&MVIN?zSJ1MgQ)( z5O69$o~&CR^*$Grv6%!+t2Ry)iFRQp(LFgGaF!?T*hw)itH%ka8yLe%8S7VP(oO4A z{eamYe}~byy%G}rghT#xbU^~s)raLFc6!v6;n;~P435LOqFUWdr_i2z@+wr|X$Cjb zxTq2aB+)C9qW`9e1!?Or(t`}V#i^#juJKukqPo{f0&za=3PVY8548w>q4(zU zA&Ob?phIhyc|p9+n-iiW?AQC$o~a7QU$tWGS|*k6f|>EINeJHHOCmq@PnrzWF%Q;; z-XkiNNBAY*QgDx`7P;EXZDQ6x@J(6_+K-{sa5u*y%sHZAV{P*TpM|e~)$iWIOGwmU z-Z1t-;<{vdItI)JePC(MI>iO{6coB#t|i;u5>*=9WV_apb%84htM52E3;L$cH5n-f z7TtKHu+Y+$USs^0b?02$$*6rCt5lYhP;dm|p~_zB z39N64EK;bqo`HEEz5aKpB)ivHBpV!ReiUXIC(YU86lEAo$wQO2@`Q~&^?rW$NIg&- zxlZwCi__=x?d{n;tItzX8m>HVb5{AU;%vOdjE1sHLYdOd1! zM00xV!T93h%!XS^^|Raz`4b@eB616Z$%i-BALn7?I4Vq4!JEQ1N}LuGxyE8BVV{=` z5JB#x73EfT{+iVRNQDpw2(7njh3RzKh7`u(b}_a!v6F_%Mn&Useq;Y+W7R&-ltDxl}Qn(gckF^Hj)O^t! zF6v%HISx7Zb#Vyj7lI91=N|@$GB3-KZqGI754gQ6tBCi>pC`WMAs=vmh70+7sdVm3 zfqx%86b`gpQAEb-P}tvpeL_I-?9-=DA8!q}Zw>Gyi<_7J;dAW@z!EO!EkcvsUk*|C z+31YTW(Xn;zTu+YdunefWvMp)kEAqsfiijH(my;sQjTINufhj|jyb5PpOZvI7K+d~ z<~xW0$NhZ6n`67D{W2DtiA&{X8hA90n33rmhWt49_Jgg zPh~4AegneoXG|Yrg>3Rj%bHHrDz~Dw5poD;Ah#vWRhRaBBJ2rc>l2ueVwPaK-y-U* zs+->>Y<+5FJX27RT}ZC^TXg2-9(spG@9>e-dNKycm{d2-8m5&@+b%3G0iSz|eH3K6 z@{mc8ZRff2j*i`Ef-p8HL|$hppW&@b5V#bz4RfdIjqL;ge1{N*Nm768bHC54xMM+Y z(qk)(H%cY~{ry$ot;^sdQiUu9P+{Rv-xpr3_`A3imhRE%m)K@mD!ygH>@75W$G3kO zhiOtIBGEs?+P!=C672AmiXtJ6Oc$ymPJ`Nlk1YLQX?0g`Kg;Vw1PwyU8DFe?CG3)1 zHng5nYZoUyh%?;K04i3Y_1_BTn(I(#&sj5KdeJ!q%f3Yn2jsst2&WXh;cr+LyIv zqpo@CrX3eL<+7D3nGTQ`H?J1cUIP)0#d<`oLSp$B)i7!V=w#1E`o zx}W;OjXq|^YC+a{Ew0jP+A##F`2kdBzS}O+6hSydt-jLD!9o~jZ+QUEN0yYf<{$_f z$CIq=*%9`9!Ai(dDHR8q_wy1k)}UP**21_Pm}|SN%qpvog+%&!+K;f)=|sLTs|O=h#U zB_$1M%bZDmTwm6q*>$ZZfQL9Z3!9vi*YVpc`L_?UU+?MWcwJ=c z-rXPwXgzi1 zV}nQ%M}V|w>WjteUjydCmvNe#YR5iM-c0+g0W_$fwba3pyieCyvqMFOW==XTMQd}^ z<)(Lp4BB~o38odeD>m?ahxS6C>T>4qM70VwufKAo)b@k zn3TRk*fBE&r5`4poyEPC8pDaAz>ZTZewx!Q6g#``*t;VaGseC z_me?mhnyuoU8VKa~>?<}dF;~P#63IeJ@TT1Pu1)3wxn>w7HYKEpP>gpK{LkcFROT zo^8nCn^@^N;bTz+y730O!9u4uxWFMa^yAPq5do!+uR|rcR|rjGB7|g&@Tv^)IY3qF zyprCtX_$hEW;E6o*+eOtYqjE7*>3#6DhA%+ty~v+bpE=!Ih!Rbe7Zc__6cVznzCu) z;2R7N^XrzSCCkPc7UIZZyBk6hfMdMJEcW>Aq*l%`0h*>3E72sV4N|iKT@2hy?aQ@B zNHCEV9PgrWRidmzG|51tSU7M6ZYq+)7t2{BDQ#{z`FMNkP%|y{Jg;yhl%csAz>6b8 z{;xRZ|9rWNz4(y797JA(EInrSkt|$GbhPTi@*ov}l6afCB3woSX+|P2G%LEdVtJVv z5;xN#<=bsSlhU*#fuRHR^^N?eM1>t6_<$9|Fc5#>v*Fu8mZQH&z9`tviko8%D*}l9 z(VHXw;rxr>vWVIS3P4DxF~nMgleRp@s!F4EX=p^w@|6g6;XO?TA=^Rj7Sy&<*++=jdm8F5%o8bdTm?{b(5 zW{kiOXT^z=h$LAVnMbG>tszX1lno%(NRB`Q<}u3&u~Rn&NgyxVF1&`bZP3J?B*Iht zXXOL!7*=3P@_Z|vNcma1hl3c|7-TbL5XsRiL;Sh|%aS`*9EN<0ApqV9+2qqV?4zTZPG@c{=D4$<%A7LRv-3K>~nPNG6 z`1$QW-n}#E&%1MdNhH-~)y<3k-QDp#T4Kt5E-8kT8^`a}S36{H>t~~H>aA(B{?-u# zGl*FDGPDFS50wc7UP3%DrQ^eR4BqOSF!>~R)Mcbsieyetk60?_8xd-hlUlc3Q7%w^ zJfgy^t?%26iPzf!`;&t`KQz|8GjHFN&u}#Yvcp# zrbC*JK%odgo?@_~m$Qe`cYe*ELlzF%&i@Qa;7rOk5SBOR2hTU5HJiJn=#Pr;sN*B- zw1&~*JS=|s!0de`Uh(f7(2)N^SKcJQWM)9*tVPLI2XmHz|AjM@#}{4^vYoU7l&_fc zXZvU7#DbV7eoup!)R}~&a!NG@v>CuCGf!Gz!rvDZaqwa!S$}&apNA$Ih=QR_G46#n zY9^`Uw!K^lVT5Lc(#qTryi((O)dI|l2N}{eElg(Cji+34J={6!O#A%$+b#!@yh`y7 zRWZzk{)kBBUjdbDe0@Fx&`(r~m*y{&E2|YZmc+{TRt&`*I|wC9?X~rZR79`ebm`%x zExq*KlB`Quz5k(gbj8n6 zw^L0i9-B=3&7*HA0!u^c+7B7bBmym4iGKZ{|I52O6OpLIU@pz1Sq4|i*jf~oc8{CB zb9iQ=C4C2YMnar#XS4&V&m zl>e{2b6t+=%JO`E9iHN}C%_^KB*5jKHXcU>Wn(wdmSGUK3p*S{N=k!_ZmmSd_^B$U z-=Lmse*gbkYoCi!AZ(&tABG5&nfvUsuWPUSTD$EA(kc84_Y)+O!f~~*j*p5u3mw`p zm-ywImsdYXzLn>Zq;}=osXmggi=grRI;A!^r;_)|gA+?(?fYK4cMn~|Y z{v}CUlyeFM4MG}hb-X^?ROVU#6>LQ0f^lfZe6#cPImf^w|CB0}5p={8MuwO5?z_ba zu`GmYDiLR^B83fub}?97Ja6!m(Z70LV&6-~ue7%=uCOEa0&^LR;IZte>A0sdS&Gsl zYAM|k`5fek$zYl1;y;6b)tbSb8HY64)GNoXAS0}IH*QN##g*aa?cD|XxNF_5+i>RC zsz11`E87{&weHWioo@D8_u=gyNe2MF;HEwPk59006Wz9Bm0*&mDyTTq$!cxa%vRfd zx=>5j$h3ad9xe>^uJU(F9mI7o|gZnfEsjd!sl55T|p--S{M&ZQOx9dZVSr?G$>U- zxXu^8fp4!C^Le2P${ld_#~E3!6ZtzXa zr3xTtR5J32mIwZD5SPNkHhqcUrno%)+3z04i9@@kLzG^(5Q3ARIj~uWt8W0A{EULd1dV@{Z%~Gt4Ye zZ{=e$Q*TP5L);D0AM2nH6bZoP4a?#neS%2hq?P0gf|L!XCH99N-VGN`FOo7!;11cE zHVW11^~V&@oC=gWv5;4|B|pNYiv6Ha>nv#v)~NXxTO|z#XxC!lR@i6!dNf#}cRV)j z;GDgvsT`jcPaUhM%tlTNy>Cv?Z^Np4Y;F8`P}eU>DEjXfs%%gLFOm!500zhcqh1ipaEC4WuR> zjfq-MT4g9fMp1%Kok$S8N8OxW^ztDqPBaO(X0%L>&~H<~W_i20&XsZ+YWZ5}MMa?S zSNLZVDWkFbnvA9Z`>KVwj6~pBUp_e0qphc>_AV!Qr1%r)B1FqGtC(hiM4YI~a8hei z=V;hqcti(3h>}L0d$zc%l_D`dvR;l5`BOU7YM{XiAVd$SYvI_~Xz{@IKA>=<*znlG zXzB<|wx%pB61!=T`AqX;g-@WA!^(oC{G0uH9783X#$i=i_qUa$j|ZjU62BiB68bLJ zDdE+0^-gas3~|BHd02zk)lvZ)?Rlj^RH~KN*d9dY~=g^j|uav)_Th5P0Xti%Y8+J zZ5@TvK4v0lZyeJ&Y`w+rK%9%nkj%X+9D1uhm=hGbSE!06C;jvI_B+>lTDUR$Q`gPeas%q;Amp* zmUC*C$s4Zb9SYQx)`l4N5;g}&-CiTg@yC2S8t z#tnDoEBSEb9{5v-rpXU{p{0ymgR;_(_4cmbu9Ye)e7J0T0CO@Ayrv8QBmZAE&@oR+ zh=hOxjMzZ9?VBr4CNJSC7ETGuEEf)aZ+IpmST#YA+Yt1YWHg1z<^x6!6oh z;kr+T0v8HQ97mvd*b&5<$4WN~Z*zhxn67_2q>s|p(uFx&&b$N`b*lE;7SevNOzw52 z2UtLXNY1WQr#4pn_2?xLiVdVWJ$Bn(#&zn(Ut~9fm&#TuOO!IZ#QF-sMslwhyl}1t zlLqxZ^eLtz$6jH~Iu8vgSeOKR%XyeJ@+sY z>floN!hf0~b3ick5aDDHP4XZkYV(s3D)P2|l?k(c7cFQ+d%CylGYlSDMMN`(QO1w{ zTZ6y8XgPZz2k&_*n&MXFf*SBTY<^>1Z&MflUIjt|%wqhp$->xE>`*RPaP|?7t>h2* zp^D>6UKBJJO;lCJZ08-->MH^XZ| zAg>#=jm(nT$OlG!hdJHX3rrt_C|OJ+X869i5=$pE-zuL7zZN7|zOH(ODi{xOykZyZ zt0BBTd9 zaI&~!8vZY;8sJY*!GT_)?zzuNYx+|dU8$($a`Ib!H1_Zsc;QkHN$^W-DV4i#6bd$A6^#ah_Exas(f;k-z33idmsd^S8JB~974xR!Kz#1 z6^Zh~1KtsVc<%B=bMQia_ zRP0Uu?OmzV+K*Hm^uJA{;-{K4Id0mGw!7jLLW7`66TJa?CVWZ@-G>_O8&n&ofg{v_7sL8t_- z5|7|V*zj<+Zc^iMNLm6O1+4ahg6!YzC2c0p4qS!{qug6jDSrrm32}e`&2pY>_8BzP(!+W!t#=Zpif@naN$aK zuyXE_cTc2MlRbz05k35K5^-)4$ovSv7hD&3~C4s zIT^DBnNPWgheK=Sdt1!Ki=FibJ)m|txpdGg;BjGO9jc<^IkONyDM$>!YXs{d+e0>m zhdRduSE|PpKprlxmygC`_E3?h@mHL9oB#?>RE7j2Pl|^MtYemnuSo8YRgN_0>_Ia8 zmZscA$_U-%^;^2JYPY*!3%5Izr@ijC5DNrb0z?cy+h(nN6@-Yhz5-NFeeILJbBCDj zi*|W_xBi`iv=JJ8X-TBOp;!ngc#F^Wmd~p|;MMqPqkGGtSp_?zHJp=}5MDNO6(3EL z6|J|{Vi~h;@Ka95TO~r>uVd@8_10b{Bgo>>z{g!7BMEz(dM!b{VvuEm+Xe{Mx`S zSU)JkiuN1c%8r0J+6eu__n$nQsfzhf4o!Nw@Z>X;QWK?oKak*_&rj0Pcj$^+7YC z)*JE!5tk_cQGl^G!i0N)j&^I@W^pk#B5Y}M-zDpPUV6@Q1b=SiGm#m2c6yA&*f+BbS;-mZi;SaO?niAmOCchuo?_h_Z36f-dgH=572CGr+*4pmkDN9m6tx&08 zdd)KI{GbI`TbNn7_nluk4E-0Z9G3n`WiCVFuqBIcx*i9wLgF7H=NV69igCpM?BOZd z)|WG}#9OJ#eh`_=zyIDx}4jHpI_eC~c&67@aOT1zH9S7yy zjzW@S#=C1s1da&+sR?FCNCSmO@6y>TNBkZ~pRTy%gGBeVD<`T%l6kkXZYm;HJrkoKAI)9)|NCT#^~@#%KnosOY%x_pdyKDf!D$%QyqA8| zm`btSyBk_?P*`hr@?vYSX((bLHa6vPGbyajCAPG7)U&od-&1E*4~B=UNWe#>^~u4j zdczdV?8Gci8;Tycn^*_0gpk~rElVc(OXO@2-XsNyfXln9=4x>nDK#(hQh7}crt?zf zP27Af_$7{2N^cahHrHi`tosO_sQ<JBS>ztSq zfe`CRSz}g)-^1H_SfZu0-&Ul(2lm2VT7j0k-Th$a&V3?yQ2=1(qZ@%2MzVu=9wbtZ zSlhZi(W#b7VZ>y>`|?vPfO$jC;1q+^ zQYQmcLB?{4@u7ktl1|*rCrUH1<+`C(P0B}AplL0fa~#RYpkPzBB%`ST*-ui=L~K0R4;pTk3Kgk4lXsyPCb?7b479A3A7M#S8x z%t2JRYK0NgJ7VeE!?m8!_uf!dFShJ2Yybh3Bo$~`dHq6$MrbY*og)gMg`^3A>5)9g z!k*WZ#nYA~xI<(VtXFw|V+9etxiAR*B|HH1OHmLQ>wBy}$tiK`1CmP6ST7psAft}v zn4wvoh^cQ{t|iNP-eMWb80|F8b-#$Qf~DD>PHf~OfxVx;hOw!*Fx~pF`{m5K4qv~jZ!fk_1FaYr@ctcCZ@XBC<1ipkB(#Tyo1}{Fzo41AuML0?0 ztse}k^c2>M>&O(i7u>{Hd$Yu3^WJ>W-UvAf?nZ@9C)(VIG$jZ%150)d1m*_DPs#BLguh;Sa_L{8XfC1@2sjvH~72PCDG8$dV_zoSz- z#e%=>wEh9B{f_2;F|4&}AJ5_fwlOSv8B>raMqAilB4ln9wwJsKSUxU}EB;%TxKTZf zI;-Xm#a;o!f>Z0{+HF?-N%$v35hgMJZG^WN=29oTBl!Je&#%~}9qbcv!$kP@l={cq zUQo(}bJeZ_Ni0(9h1-EL0q#6IlEq1t@Ogp1tn>z^IP)JDTwog(Mo5*lI5Yu5wQVFE zPgGNvtNK17%YP!2#WSnr%b6Cpj99u4}0ZSMM4<(3dB1$11aVDM4rMb6T>iq2L^gYA@9sIV+>Ffjo%%lxUSDPFoM!=MjumXQe5ECx)&^SylNS<^JEi=v zFABJ;8+RrD0udb~E$jkL1|u=veqGlz7rgE@E3xe9txnhJAeY0XKG-%AhxJ2H)RK*m z;j=&PcKy;FO|88aExDHknmT|kA0oPoJ>1)o?KzYCM688eGUm?z0Ev@cKn`QUyEsEw zIf$^lR-Lfm>1&CyZwFuc-f8Nx4G6kL9|Sf3_)Ij3eW;JqQni#Fv#kOwddM10cKuGD87T+d6M`+yV+ zEPZ2g4}@0k!;mX68wfy_WKX;ln_2|du1Wm1_LmV6IPBrhgL_&5*#OkZF|ik-+0a=# zsNgZc6Y^a?liqX3_O-T>?`#m7n(XXOSB;OAG*lW9X{!s34A;!3Lo7-^k`dAbs}AX3 zt(nPW{ZOiET-xLcrp$!ktT1HN^S%MRD_*>+VoRbrtxKC*Lb7sJ(MtPA=Pr%0fhz$B zkY(6@*mr3ZOTB#VBZ4<&n3Dm@b)Mq(s(3zWN7Gq79)K9KigqvTiaH@->g#ExUbKDz z#JKDpeDy^R&zpYcH7Og9oePl4G1wLLm!0#rpSYJ%p6%SMC%v2IgscTRh>`EYEs}Rk z^I??rsqmb|zqDUUBi(*H3)dqMCOKrdHC~Bar6JWO`eZ4ymv=ixt;u_it%WkiQs4yy zy?PT-AchvkGYH>5HZ;O`RF|TCNEbFMOaNfq^i0|+PZE2JYz;29nGJtL{>@2IlIn43 z3u=%X!91VE2I`0JmMQXlra)qh-G-Wf+y3~ScpitK+RsM0re;}Ndta06#Bx9 zi|)N)JnVaU9gdkt%K(BJyh%)t0_L^Z@{KW%W2Jnk?GcgKw487n7TehC#xJ{K6zAFl ziPmWN3g^Seaq;m~$dc|o1Pz7Ng-7tgicZyneUh}2Jp&L66m*eQ=mpbWfSfcY9P9=3 zWwq`y?_m&(LS(qvMd+}(iIbNbxyf5eU42Nq~@2$qpd*6qS0YE9X9#aC?gUJYT^ODHuyB)jjdTjoRwGraVp=|O(Wzc&qj2NrIyvy z!&w{JAeDm)B)@gP?mhi=E{un%X&vHD`a8?tAQBu#Sr6xEF~0nndu;fk8;}X}!Y1Z~ zNrFj8FmWC3Z}4D5k7N|ok%RV(ENL)x z&4XfMOZzt|{cSbVNh(1h)v&=pIH~ak=j+j@Q&3TW9x{{2UtELx;nXBiw{oYY?+joU zb0fg+0e97?RxZ5Ope?Z==PjmfGln-VS(!ByLe9n!x%bUps{<==OaY++VOcEZ2hbM# z#>u84LR1?|9Py~ePCuR)N#uy1>EqKd9AxVd?oRO=k(sotAip0@3gc*rQh|R#C>c2+ zuKh$l7BMi9Tr6~ZNmoo9!>N`;z{XU?ZHJL>n6zR1d|%$5D;}HEfYNFcU`Q3-8pM5V}{nha6-$aXY1m)27$DO1dyC3NS zB;ac9eNzrqh?o;}A4L8>1t_K??yIY3=|*W|G>AQX%F*B{g+rw?iq_m1QZ`(z!{fVe z=F9f|=lG7`!BhUa&Cnro=zLDmOTi}oy{kS9MS zsU`zvp>g{73$)AUW zrh^LYkQ$<<(){z)*1uf3^jSC^mRCipI9a>%@95R}@v;Pl4piA#I5QFKCj_#kkg#6< zdL5B?0ij!pX|0xKS4W^*#-s%i-0lQ)Dox68H10mT4#tPa2#N>Yl~BoyRN}KoM8{;} z;j+10DaD5#Y9Tp11CvYz*vuX+4gfvh);|2+jeb-toc7*#3D=EEmdd4|E2{=mG8G40 zm{SUQAV?dEt_LmX-doPOmLk%qzn7ORf(Pr zE?e|0R2TIUNnkh#8&i}5ZqSn_kT@HapE&RS6U5L+obe{?1GaGJx&R^d`h)TR<;;Xq z&m_sr@&LrvY^5QmXF$eT?#`~u#hQ_*jVZk*TrR7;pd8r9kR1iULU62nH6Cicn~WK&My4H!tqd=^Mq=u3uVnwwUaEMfADk{4-B2 z5Q&%RBhM=#qZF>v>>YJCt`06CkH}JR&xnAm*h0;|U!T~;{&%I4yzqJ@5qxLsg@Oj1 z=Ghf#EB?FI%P>2btxk8iW;0;}ZEi)1)mp60`3Z`iYaI3Chx6l&tpEyLY`Uv5ZuEmD zmVL?Y*{Ga!*e}>mqd)Dgmwv8cg%MQY>#=xJHJ&V#qJhELeqmh5 zASPe|1c?7k*)-^+hU4w%XT$|+85!b<74I2hl9<$D*8$YrM65!P8R$BvY_i_9=%Kkmc9L+2=K8mch>JJ%w$Zt-?fzZk zGF&!&RhzX_JPSazkDQvkge|ajZZ~gvkAW^NM%cYzKRFlB+Lt(VD1-MJM@4Yc0B{tT zA*Bd9p%Ab7#4d@MLy;H9soGsWG=E!o=KgMv> zR|I2AX-95I4l&92HPRG`YP|@`eR;U?maE3q%1_aEV8s7~m3E{uJiLP{UB+I!u;9Ao zjs;vK?Fn*Zhr7;2h9bgB$picPtBgu3#+dgzI+kAuzr}WWk7Qx#dA*)QYmX;e5R-VZ}U&%Rpvw>S3#RwE=5D(X~#=rR2$7WV?@O0ZX6``oQy9))AHpT8#cuaJ1ZHEy`!OItTR~o4U4%GX4d9umyHzG zyFPXn%8Z!6$Y%3~K(=)FK2o(su|tjUgdX^$=QhqWR@DJ_?d^U%?y_+pKB@sbVv#k1kP)N7CRx`(#k3x52u^yz2m;4D z^PiPfYOr%9p!aCEOhpN4EAd8?5v}O8a-RVhN8gBJJ>MtY61oZ{v+agX8o_r4vc;PN zqndkYyQCcrqLl+M0@EaEKO4f$lX1&@bz6B1{K)PrRN;7|b6~T^^N^Aq^pj?C*k-x2 zu_C1#SnvM&swp-b6liEV3quzev4U25W@8fPUn-zAeP=$F^TwaA>F-DS z`)B8R+q}t{QY&@k0AuFVG4^B;G?f-I>U}o^k@IUfj_eL>^c7hiXkeh77lz^d?kwb} zYPBi82KYflWT4pYT*(42{LMmpDGiE(Y3JR08g;kzy*J~DcL9H{rpEi>y_#^S9yMVZ z2c-VY-5N|sr>5-;1J(NAh2UG^g296)Ggb-YASn3Gz5@o2^x#)%+Z($#6v7&^Iaa*C zlU0$c+)MoW_4$3Q0EG1i4=I2D`or&;>|kCo+kcv2$7baCVz=7L$A-Q8p$c8dU%Dxt za;2r)?8|b!6{T+#JE_i$l!xGDK%qj?x#X+G10aP(G>EE{Iz?^yZoPLhCzB~11xx6~ zvNXVj7gOKvPshTOa6mR_pslgBpTBRa?`ATAU1dO!vm-hYyb;buI>n8Lnpcou7CxXv zxXqKYvw@P+iB(U@`9}oMf9nno{_$TM%YXb|xHjpGy*{7_5`^05(wij5?PzoR*SobF z>wo@`?5}+#8*dRe*KduALkzjr-%51r21CHXO1R|1^*`r$aN>cd(SW;utqR7)zV?~% zNge;9yTxk2$Px2&v4vvoy!{oy72ICjHfI_L;8YYY7&V#8*R~F_$4U1lGzBpJ;^xi5 z%O=N$LG23|GOoR5QR}+vo+C=nCcts3rP1Y3k^xc|`MPO(AaT}02B?dp1q3^%+h|q} z5N*?ER`j4!*UDKAPs72}Iz$qJa^P~_5X(E?NB-D-)jd~GL}M|_EK79Nwcbh%B`Z3K zMcMB#j7E8s}weK1d$_$!%N0a6+pb-7b_ei>Fi;IU>8)kpG2wS9hs)W~^bYPSK z&VJJ7LP5jIHwRBC6JX4Fco`M`Q}gFck|R?1kC{s&ArCMP>d*nqz)%S^(_G|4@{#Ui zz580xlYs`q{#e}VjrEWGvaa5dxT7VYQ`9y3R)(0wj2?}oN5!cw$P3$Gs)xH+#=$YV zi+Xf%+%Jr7nUwU##1;x{k%~Ighl)`QPCfRsd92i`k|0pjmwFkq!(rRzEOUw&3Vaj2 zN9zRg_*jLu05wH`iZmO{V&}Qo<#@+@maj%|xGF|YlIBD;#dDU+y{IUmRT0#^V=sv+-Eq^Of@BWiz0iQO79;019#I459N{&RBTNLE$^o4KH}fikBhtZ zaU^!;=s=z?f-Cl^#S<3^Kq(a0T~CLieriFPCm6``nbj^~N*~^wXw#oK*7*-I$ zQxj_}pD>0p4hYr~(fs}bVa5S*DSi!6U#9T$+=*t^72Qj6g(bR5b3+CWu{C9FZJTyY zikH}Cf1R3`JrSyu9-n1nzZFpM7~q#^0&)VZv=JIazhL3JJKSXY@0oY|25kV!2Pi1G z!`8C~&-eKv1vpOA1k>HfO93si`mmZ|1 z53e<_@nYA7Q`Z`;*WMu^Kf*7*Zcj)=p|sgD!0~ea>Ms>-Xr89MgjgD;~YoV zE9HJ+kP6%I?T7L_9TUau7giWM z*7a|BmthBdAhnsP<7mn%VFbbq_Dp*t?Am8A_ntjLcMHc44=^BBP^MbzQ2Pk`bF*p$ z#+;y*zs{b9;c(Q1$pbwCVjk66!-K>ah&-au+yawTq)Bm0?j;;%ha-|mr1+(`7_xXH zQKzKg!z!rW+*Z|rsW=5Ogami8^DnlJs9{@SL3j_-8OV2YD3 zu(1g{cCo&k#Xfll-OVs0Zde<;EEgAY5UY`;2cN>fxC6eAuf6;q9u<~_liF>3YT5OzyFI|Q-n zT&@h&GA^$pK4NB&Jma$SfxGayPY&?^;zk(ersmzT)eVvQPUn?8q+m7BN=875L*)ox zkB&w;(#+-I;dJdxA69aJUTAR8-Gmt%A5i$>w^=JMg1bp_)N)_@M6O&oxUW~o;x1Q< z6E{9Yq2YFKtl#8oj_<(tOdyBpI-qU9G87TAj0|LTiRysrRTeIz!I}Hu7Q*382_Q|a z{>ye5wudY>Ef{SjK=&3wFF7j#Q^_;3<}u-(qw67A>s_AnZqsI8@7z$umDpY~8?md} z=_Kvh=9mvR$A=gjI(RrQ{NP1=Q;xIz0SmK@VN@w}?G``x@z$AX*44o%Im(*9Z+;Wr!SnWlMA15f3rt~*T-U}S(0AwUu1eX{Luad5-r>XG84IVl2C+= z!S$Va$kp!7LRS|M0U>*wSArKrrhPgU#a$Qyc(o`HM!;OjYc?i}KjEq>F$bn&xz$Tj z=~|NroSU%6RP7t#aR*aK^X$nq5oWihRx3amPE3)JXa*1_IGSR2STBZEhWarkckp2? zE+PwfLU}x#$TQY#Fryeo4f3_&X68aJKCeM1DN|%xuK)c>_pj^H+g3s;J39O`O)++? z?8I>JgFAqv5aGf>&_smS7?{) znx>U70?-$v+byR}$2hAHB_Y?&Z5UTGT7bq0`r^0gf|gDT0~bn6!43g~@@Q6|K}g|H zpg?zEgvpp%U{j2$)G6&Ona}xgP8f9pYfNSOn(p*GJ?I{MyBVAjZx~w{%}P5^?^_}K zT9Z=?c0|)@2|?5^1T=K9em~7j9ufOt!2on#PK2dfOhc`t#gHsYv*#^OQdhL=Tq852 z+>05tr&p#6vzmGDX19J+DP7twUa zZ>@EKNF-XzF^HC-sTdM&3FFf3NLu+Ljn<`ZeOG3?*zmUl7&#j#GY!PkS^Rvmly{Ir z(bHhFb49*!afKUqXL>ny003m=%Y0j5Gio^^l>3_J0Ti2x#{!-T{~w56El%Fj^8p_z zu{RuWx{tLUt#v6>F5S_EgaOvfStMR z@Wh4RK?zd9gSFZW1@*tAhVi0=KS!>ao=c~$(7EyQ8nR+0>#2MXHXP?Z=0qwJK(oJU zR6r=mJ;5M~F*96Xq%O zF})%lxg`7mgg!LE%~6KP?rSn4bhp-T*d0O!4whzgBVySGS)k^f->q3*T>P@&&S`Cd z8h*qucNYjNhE@$rkRP}!7dM#3Kmo2`|K%pfxd{CUH#>0FS@YjLp-9-kl!~8frp`ZV zI)zGle`ifHOPjBBOr2G;r(v&tZqs08V{Uk%qA+^}Bd~8hqF4vC>309~9Lomo^ZVmI zr%D)z6}EgWbS+a8E!fyR;=*x(mnE8EkQxW12gAS1XfZsQrJFsH#UvWYXw~3fb-V;a z_MhzmQt_*7s$P0|C{V*G$MNh2A36HN!Jt8NoivH5x~))rIokK1?tjKdBK)9kF3OSt zHT9&^Am13M{+dya^U<;X$GvI#!V2Rhnpd=|U>FYLssqci-j^6OrU?_l3m9LX#zmHj zZ%BgUnO;L5B@SFi2r`qQ%2Jpazl6OpFOjvov3nEy0D1}nlp`pXLPu!!h)meaeRf#i zeqOL_SXE`~WxU{X_7lcm>Ny)#@n_Zj^vXP|oWdx3rGfy!QbWQwSv$$rC-;vy&pQ4# z8@+_q%bS2U!DSJ}?{H(-5_T?crZ-}h6E3(F1Y?;%ggx)~(c=`G)@NUT_2vCf|Ksjw zoj&5uI;A$*VLAz{OQmN^t%Yp9$SJY&G!2_2wYunS#L6)WHNT9|_FVje$%;nGnd&yS zPNSD)O#abwGLQGrrmS%gVpNmXJFD17JIUml0b${(N&J48170s;}&}2Lx z|1s;zgjeh_!+i(KO`f$a<27heW%Za{H2d1uhjKAHoaJX^l5O*vOlm(y3Tr`Hn_ctM`u=8-NcTRRs_wWUY@V3MT^%hkgq@%#U zlR7qdQLT2+k75EvZ*J#1l<^G&#Eqs1bhEGF^&g^uJ2c0fH;guJiTveD6sio9YHfu5 z9!B}mi9)zQbSUS9CA*DIw;w|7NY!om1XLfoUzjZn1fkVq5omRv_%QTc_rdpHe2FLP zP2e3@2nmjUP5_5Ln<@Nmi_u`4XkdtwSrDNnEdjmJ`A>olrCwB+K5fch$pgpBHA08$2f^ z2WLxg9nQkdWMIgaxPPXI5V{vG^uD9^%!BsLd>=0o*2^bV(LL;*zYoa6ENUrL$J?M| zi9%`$;6Od&^B&zsdnuIDH>o{O4^S&hy~aDA%bD_lgQn#)^M=}y4&D@Y_RZpCTPYZl z1LCI`GZkCUj4P$@DDZXH-`EQxuFOs}vYdURk74-Bc^!@?@^LXGzQii7;Jw}bkDf+* zDXx!};@YKpDdRVMaqsA@v+IFYFpLhwM*(q8K+jO-ClXm_-!Ar%q!;yBd`+qZE-z=_ zDz3^VHR*7)u*MxG3=LB9z!}J~b6~E^MTiGhlL7m%kUSZrhB%m?DB72!*XQFdeTljf z>xf-Hu~m%4KNxx#{Q6u;DM4tAY)Db0&^`DjBr&Yy5(by<)QyB`;IU~q39zLPDN8C~ zI`rFXw_r8(EE<%ljYgE4I%Qe{rmuA$KrY@;$qT2(d}ZINDIr@m4?z|!Zg0$Kl>=;O zR8WCH32=!(n_LV;DupotYmM;t!JiaT;2GJZV^y-Ap$M>=ZV%&pI#}9rQzCu!#cG~L z&@ye!Bc&{RbHXk2p@zaEm}!e(qx?w7NxyCgXt>S;2#yt$HNd?#^3My^v#R-bmvHqg*&Gww~N zX%#g3gjE)d;WTqWdLG4e4LrbwUV_5B1V=2VHdopkZ=P|k44 zkC_Db*pWkUqmFE- zOR)?#E3$!6WKnlG$D82w7Aj-8MS=pW2OyLgN;qGUUU@|N&<-^cR9d43r-U9M8QYQL zS@x!bU56RDT)HC9NgFkWuHL)>Fxxn5X0AU9dZi7~Q$0S#=5As!F!>L{M)K^uMVIOW zdkrcWZ+h(3Z|gL)s)OY^0Vy^|8^+|+rT!~U>uMDAb{B)&^4M7eg>!^iLS+H=Ww%C; z@@2G=bI2PB&YaYzFV(y_Bw)T*6vDsa2q7#e9vEEZuc~8}&`6Ok!+#&x;5vIxn}MZQ z$7@2BSS`L^Go#*;5tiICvv26Al7^+U)!% zA&COt*zFO=j=Ep2TONxyrY_QylEq~E=q0&B8|*=@zzb5qLN}ZbgJw{xS}g0K4}U!H zbi#OH_gx!Qw2Iy(Ar{RJh9G7gidB|OEw)*-dczID1n9VUCN(qWoY7|LHRUHYm8 zm`8?13I7ALR5R50)QI!JtRcl-_&{Zz1mOzPLRJTDzG#ZH2dE#V@J@DsI&kMSp-Xa( zP)r}hifXXZAVUB}hp|(IqGEctQ(DMw&%U)Hf~~K+$&@`;t|c_&ScHOhp(hABOQgFm zVb0?In;BQyH3Mp?3#t`hJdYNmR`_59fCgu0XA|cPD;lYtS z`wQa^088Jxpn+WQ?MCn4;vMsq40Qa8`HHk}1K*VksHtbmH(nk{IvcD*@&kfeAExk0 zmJ?6fSwIzos2kj-8mo%y(sD3IsHs~VAKegX(O6+n=d!ZM5y9ElJzmDG@;VXvCVN;9 zNVh8+LNM4rTZTwhlH{_y%^c#=HX z3X_8v?E&1<8r1)4O1$dD^R_3`X)2pz`peEw%0?qxESWWhGR9y@ShKA9k-|%PcKxR7 zgS>s(n%X(AGy}Z{z__A3U?r&oSz%m~y^75MXC~G|I3}08@Gz$xafEe6+hovA#(3g| z2HQ!;;q0rsshy2n$~^XhHfaAl5b}>4v)OlhPp^MBe>(f_h%4~+4&xL2A7AM5uW0c7 zP|MCii$Pf_XT>jQQc2fX>x!Xn)vF-inT4tT^7^eGaj&0=3&l1iO#kDY71*5xdbeAb z&v8rHJ=vMtGgR#-N5ndabIP;=v-t_J3&F;>HJXWelj>RiMWm&kZJ**xECvoXL3i`a zQs)p$L!;h{^pKp16&4FV7$cG0X9@*ngWko9ogPEhXC-|KuQrUDos1rix^GVy3n!K> zo4&HTy3r#q_aOk}wISm;B{(DMQwNg|(se!)0-JeFfRA4ot5T93M=*SkL@)0q9$o#| zQZ?*( zn4cOI$r2a|rCo!Y0~)-!K#nD&7nZsSci1QgnI-~6{YnpB{u!p6R^ep%B9j0G(w{xu z*g-8klTYCrz&aUlPH8X~aStEv_sVz00tE`6RY4N@^PsP)f#m=rnw%jkYB>bK9K7aF zH3p~GRiX{=`EnMr^^B8ZSp{uilAIZ#jAx1tW^!Dw_`M|GS5?U1FV|U{}IUC-GkXqW>mmsVOVp6IJ0~9BnpHKjXs>54PIKx)g?#{-r z3kJapUGrj@!fikZ{Uw3OlbWz^FXWqewi-wn|A|)y?B(pm)MZ2&7M0i$1@FlTmz$iT zeU-E*($=srKa}f{hY69;ie~IRgG#DyUxk}3PhO#yIXa|?zBo0uqcXPf+0pK}NG@T3 z^YaEP5tCRn&Iflyf-v;PNVLt=IS diff --git a/resources/localization/en_US/PrusaSlicer_en.po b/resources/localization/en_US/PrusaSlicer_en.po deleted file mode 100644 index 9e5335586..000000000 --- a/resources/localization/en_US/PrusaSlicer_en.po +++ /dev/null @@ -1,7940 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR , YEAR. -# -msgid "" -msgstr "" -"Project-Id-Version: \n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2019-04-09 14:34+0200\n" -"PO-Revision-Date: 2019-04-09 15:04+0200\n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Last-Translator: Oleksandra Iushchenko \n" -"Language-Team: \n" -"X-Generator: Poedit 2.0.8\n" - -#: src/slic3r/GUI/AboutDialog.cpp:35 -msgid "About Slic3r" -msgstr "About Slic3r" - -#: src/slic3r/GUI/AboutDialog.cpp:64 src/slic3r/GUI/MainFrame.cpp:52 -msgid "Version" -msgstr "Version" - -#: src/slic3r/GUI/BedShapeDialog.cpp:43 -msgid "Shape" -msgstr "Shape" - -#: src/slic3r/GUI/BedShapeDialog.cpp:51 -msgid "Rectangular" -msgstr "Rectangular" - -#: src/slic3r/GUI/BedShapeDialog.cpp:55 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:118 src/slic3r/GUI/Plater.cpp:136 -#: src/slic3r/GUI/Tab.cpp:2185 -msgid "Size" -msgstr "Size" - -#: src/slic3r/GUI/BedShapeDialog.cpp:56 -msgid "Size in X and Y of the rectangular plate." -msgstr "Size in X and Y of the rectangular plate." - -#: src/slic3r/GUI/BedShapeDialog.cpp:62 -msgid "Origin" -msgstr "Origin" - -#: src/slic3r/GUI/BedShapeDialog.cpp:63 -msgid "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." -msgstr "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." - -#: src/slic3r/GUI/BedShapeDialog.cpp:67 -msgid "Circular" -msgstr "Circular" - -#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/slic3r/GUI/ConfigWizard.cpp:111 -#: src/slic3r/GUI/ConfigWizard.cpp:544 src/slic3r/GUI/ConfigWizard.cpp:558 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115 -#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84 -#: src/libslic3r/PrintConfig.cpp:59 src/libslic3r/PrintConfig.cpp:66 -#: src/libslic3r/PrintConfig.cpp:75 src/libslic3r/PrintConfig.cpp:209 -#: src/libslic3r/PrintConfig.cpp:284 src/libslic3r/PrintConfig.cpp:292 -#: src/libslic3r/PrintConfig.cpp:342 src/libslic3r/PrintConfig.cpp:352 -#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:483 -#: src/libslic3r/PrintConfig.cpp:501 src/libslic3r/PrintConfig.cpp:679 -#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1226 -#: src/libslic3r/PrintConfig.cpp:1244 src/libslic3r/PrintConfig.cpp:1262 -#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1324 -#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1453 -#: src/libslic3r/PrintConfig.cpp:1494 src/libslic3r/PrintConfig.cpp:1502 -#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1520 -#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1611 -#: src/libslic3r/PrintConfig.cpp:1827 src/libslic3r/PrintConfig.cpp:1897 -#: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:2123 -#: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2137 -#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2177 -#: src/libslic3r/PrintConfig.cpp:2187 src/libslic3r/PrintConfig.cpp:2293 -#: src/libslic3r/PrintConfig.cpp:2368 src/libslic3r/PrintConfig.cpp:2377 -#: src/libslic3r/PrintConfig.cpp:2386 src/libslic3r/PrintConfig.cpp:2396 -#: src/libslic3r/PrintConfig.cpp:2440 src/libslic3r/PrintConfig.cpp:2450 -#: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479 -#: src/libslic3r/PrintConfig.cpp:2488 src/libslic3r/PrintConfig.cpp:2506 -#: src/libslic3r/PrintConfig.cpp:2521 src/libslic3r/PrintConfig.cpp:2532 -#: src/libslic3r/PrintConfig.cpp:2545 src/libslic3r/PrintConfig.cpp:2555 -msgid "mm" -msgstr "mm" - -#: src/slic3r/GUI/BedShapeDialog.cpp:71 src/libslic3r/PrintConfig.cpp:676 -msgid "Diameter" -msgstr "Diameter" - -#: src/slic3r/GUI/BedShapeDialog.cpp:72 -msgid "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." -msgstr "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." - -#: src/slic3r/GUI/BedShapeDialog.cpp:76 src/slic3r/GUI/GUI_Preview.cpp:239 -#: src/libslic3r/GCode/PreviewData.cpp:175 -msgid "Custom" -msgstr "Custom" - -#: src/slic3r/GUI/BedShapeDialog.cpp:80 -msgid "Load shape from STL..." -msgstr "Load shape from STL..." - -#: src/slic3r/GUI/BedShapeDialog.cpp:126 -msgid "Settings" -msgstr "Settings" - -#: src/slic3r/GUI/BedShapeDialog.cpp:299 -msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):" - -#: src/slic3r/GUI/BedShapeDialog.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:1252 -msgid "Error! " -msgstr "Error! " - -#: src/slic3r/GUI/BedShapeDialog.cpp:325 -msgid "The selected file contains no geometry." -msgstr "The selected file contains no geometry." - -#: src/slic3r/GUI/BedShapeDialog.cpp:329 -msgid "" -"The selected file contains several disjoint areas. This is not supported." -msgstr "" -"The selected file contains several disjoint areas. This is not supported." - -#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:507 -msgid "Bed Shape" -msgstr "Bed Shape" - -#: src/slic3r/GUI/BonjourDialog.cpp:55 -msgid "Network lookup" -msgstr "Network lookup" - -#: src/slic3r/GUI/BonjourDialog.cpp:72 -msgid "Address" -msgstr "Address" - -#: src/slic3r/GUI/BonjourDialog.cpp:73 -msgid "Hostname" -msgstr "Hostname" - -#: src/slic3r/GUI/BonjourDialog.cpp:74 -msgid "Service name" -msgstr "Service name" - -#: src/slic3r/GUI/BonjourDialog.cpp:76 -msgid "OctoPrint version" -msgstr "OctoPrint version" - -#: src/slic3r/GUI/BonjourDialog.cpp:218 -msgid "Searching for devices" -msgstr "Searching for devices" - -#: src/slic3r/GUI/BonjourDialog.cpp:225 -msgid "Finished" -msgstr "Finished" - -#: src/slic3r/GUI/ButtonsDescription.cpp:15 -msgid "Buttons And Text Colors Description" -msgstr "Buttons And Text Colors Description" - -#: src/slic3r/GUI/ButtonsDescription.cpp:40 -msgid "Value is the same as the system value" -msgstr "Value is the same as the system value" - -#: src/slic3r/GUI/ButtonsDescription.cpp:57 -msgid "" -"Value was changed and is not equal to the system value or the last saved " -"preset" -msgstr "" -"Value was changed and is not equal to the system value or the last saved " -"preset" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:17 -msgid "Upgrade" -msgstr "Upgrade" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 -msgid "Downgrade" -msgstr "Downgrade" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 -msgid "Before roll back" -msgstr "Before roll back" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 -msgid "User" -msgstr "User" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26 -msgid "Unknown" -msgstr "Unknown" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:38 -msgid "Active: " -msgstr "Active: " - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 -msgid "slic3r version" -msgstr "slic3r version" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45 src/slic3r/GUI/Preset.cpp:1250 -msgid "print" -msgstr "print" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 -msgid "filaments" -msgstr "filaments" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47 src/slic3r/GUI/Preset.cpp:1254 -msgid "printer" -msgstr "printer" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Tab.cpp:872 -msgid "vendor" -msgstr "vendor" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 -msgid "version" -msgstr "version" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 -msgid "min slic3r version" -msgstr "min slic3r version" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 -msgid "max slic3r version" -msgstr "max slic3r version" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 -msgid "model" -msgstr "model" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 -msgid "variants" -msgstr "variants" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 -msgid "Incompatible with this Slic3r" -msgstr "Incompatible with this Slic3r" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 -msgid "Activate" -msgstr "Activate" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:98 -msgid "Configuration Snapshots" -msgstr "Configuration Snapshots" - -#: src/slic3r/GUI/ConfigWizard.cpp:111 -msgid "nozzle" -msgstr "nozzle" - -#: src/slic3r/GUI/ConfigWizard.cpp:115 -msgid "Alternate nozzles:" -msgstr "Alternate nozzles:" - -#: src/slic3r/GUI/ConfigWizard.cpp:181 -msgid "All standard" -msgstr "All standard" - -#: src/slic3r/GUI/ConfigWizard.cpp:182 src/slic3r/GUI/Tab.cpp:2909 -msgid "All" -msgstr "All" - -#: src/slic3r/GUI/ConfigWizard.cpp:183 src/slic3r/GUI/Plater.cpp:414 -#: src/libslic3r/GCode/PreviewData.cpp:162 -msgid "None" -msgstr "None" - -#: src/slic3r/GUI/ConfigWizard.cpp:284 -#, c-format -msgid "Welcome to the Slic3r %s" -msgstr "Welcome to the Slic3r %s" - -#: src/slic3r/GUI/ConfigWizard.cpp:284 -msgid "Welcome" -msgstr "Welcome" - -#: src/slic3r/GUI/ConfigWizard.cpp:288 src/slic3r/GUI/GUI_App.cpp:600 -#, c-format -msgid "Run %s" -msgstr "Run %s" - -#: src/slic3r/GUI/ConfigWizard.cpp:290 -#, c-format -msgid "" -"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial " -"configuration; just a few settings and you will be ready to print." -msgstr "" -"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial " -"configuration; just a few settings and you will be ready to print." - -#: src/slic3r/GUI/ConfigWizard.cpp:294 -msgid "" -"Remove user profiles - install from scratch (a snapshot will be taken " -"beforehand)" -msgstr "" -"Remove user profiles - install from scratch (a snapshot will be taken " -"beforehand)" - -#: src/slic3r/GUI/ConfigWizard.cpp:325 -#, c-format -msgid "%s Family" -msgstr "%s Family" - -#: src/slic3r/GUI/ConfigWizard.cpp:362 -msgid "Custom Printer Setup" -msgstr "Custom Printer Setup" - -#: src/slic3r/GUI/ConfigWizard.cpp:362 -msgid "Custom Printer" -msgstr "Custom Printer" - -#: src/slic3r/GUI/ConfigWizard.cpp:364 -msgid "Define a custom printer profile" -msgstr "Define a custom printer profile" - -#: src/slic3r/GUI/ConfigWizard.cpp:366 -msgid "Custom profile name:" -msgstr "Custom profile name:" - -#: src/slic3r/GUI/ConfigWizard.cpp:390 -msgid "Automatic updates" -msgstr "Automatic updates" - -#: src/slic3r/GUI/ConfigWizard.cpp:390 -msgid "Updates" -msgstr "Updates" - -#: src/slic3r/GUI/ConfigWizard.cpp:398 src/slic3r/GUI/Preferences.cpp:59 -msgid "Check for application updates" -msgstr "Check for application updates" - -#: src/slic3r/GUI/ConfigWizard.cpp:401 src/slic3r/GUI/Preferences.cpp:61 -msgid "" -"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new " -"version becomes available a notification is displayed at the next " -"application startup (never during program usage). This is only a " -"notification mechanisms, no automatic installation is done." -msgstr "" -"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new " -"version becomes available a notification is displayed at the next " -"application startup (never during program usage). This is only a " -"notification mechanisms, no automatic installation is done." - -#: src/slic3r/GUI/ConfigWizard.cpp:405 src/slic3r/GUI/Preferences.cpp:67 -msgid "Update built-in Presets automatically" -msgstr "Update built-in Presets automatically" - -#: src/slic3r/GUI/ConfigWizard.cpp:408 src/slic3r/GUI/Preferences.cpp:69 -msgid "" -"If enabled, Slic3r downloads updates of built-in system presets in the " -"background. These updates are downloaded into a separate temporary location. " -"When a new preset version becomes available it is offered at application " -"startup." -msgstr "" -"If enabled, Slic3r downloads updates of built-in system presets in the " -"background. These updates are downloaded into a separate temporary location. " -"When a new preset version becomes available it is offered at application " -"startup." - -#: src/slic3r/GUI/ConfigWizard.cpp:409 -msgid "" -"Updates are never applied without user's consent and never overwrite user's " -"customized settings." -msgstr "" -"Updates are never applied without user's consent and never overwrite user's " -"customized settings." - -#: src/slic3r/GUI/ConfigWizard.cpp:414 -msgid "" -"Additionally a backup snapshot of the whole configuration is created before " -"an update is applied." -msgstr "" -"Additionally a backup snapshot of the whole configuration is created before " -"an update is applied." - -#: src/slic3r/GUI/ConfigWizard.cpp:421 -msgid "Other Vendors" -msgstr "Other Vendors" - -#: src/slic3r/GUI/ConfigWizard.cpp:423 -msgid "Pick another vendor supported by Slic3r PE:" -msgstr "Pick another vendor supported by Slic3r PE:" - -#: src/slic3r/GUI/ConfigWizard.cpp:469 -msgid "Firmware Type" -msgstr "Firmware Type" - -#: src/slic3r/GUI/ConfigWizard.cpp:469 src/slic3r/GUI/Tab.cpp:1870 -msgid "Firmware" -msgstr "Firmware" - -#: src/slic3r/GUI/ConfigWizard.cpp:473 -msgid "Choose the type of firmware used by your printer." -msgstr "Choose the type of firmware used by your printer." - -#: src/slic3r/GUI/ConfigWizard.cpp:507 -msgid "Bed Shape and Size" -msgstr "Bed Shape and Size" - -#: src/slic3r/GUI/ConfigWizard.cpp:510 -msgid "Set the shape of your printer's bed." -msgstr "Set the shape of your printer's bed." - -#: src/slic3r/GUI/ConfigWizard.cpp:524 -msgid "Filament and Nozzle Diameters" -msgstr "Filament and Nozzle Diameters" - -#: src/slic3r/GUI/ConfigWizard.cpp:524 -msgid "Print Diameters" -msgstr "Print Diameters" - -#: src/slic3r/GUI/ConfigWizard.cpp:540 -msgid "Enter the diameter of your printer's hot end nozzle." -msgstr "Enter the diameter of your printer's hot end nozzle." - -#: src/slic3r/GUI/ConfigWizard.cpp:543 -msgid "Nozzle Diameter:" -msgstr "Nozzle Diameter:" - -#: src/slic3r/GUI/ConfigWizard.cpp:553 -msgid "Enter the diameter of your filament." -msgstr "Enter the diameter of your filament." - -#: src/slic3r/GUI/ConfigWizard.cpp:554 -msgid "" -"Good precision is required, so use a caliper and do multiple measurements " -"along the filament, then compute the average." -msgstr "" -"Good precision is required, so use a caliper and do multiple measurements " -"along the filament, then compute the average." - -#: src/slic3r/GUI/ConfigWizard.cpp:557 -msgid "Filament Diameter:" -msgstr "Filament Diameter:" - -#: src/slic3r/GUI/ConfigWizard.cpp:575 -msgid "Extruder and Bed Temperatures" -msgstr "Extruder and Bed Temperatures" - -#: src/slic3r/GUI/ConfigWizard.cpp:575 -msgid "Temperatures" -msgstr "Temperatures" - -#: src/slic3r/GUI/ConfigWizard.cpp:591 -msgid "Enter the temperature needed for extruding your filament." -msgstr "Enter the temperature needed for extruding your filament." - -#: src/slic3r/GUI/ConfigWizard.cpp:592 -msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." -msgstr "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." - -#: src/slic3r/GUI/ConfigWizard.cpp:595 -msgid "Extrusion Temperature:" -msgstr "Extrusion Temperature:" - -#: src/slic3r/GUI/ConfigWizard.cpp:596 src/slic3r/GUI/ConfigWizard.cpp:610 -msgid "°C" -msgstr "°C" - -#: src/slic3r/GUI/ConfigWizard.cpp:605 -msgid "" -"Enter the bed temperature needed for getting your filament to stick to your " -"heated bed." -msgstr "" -"Enter the bed temperature needed for getting your filament to stick to your " -"heated bed." - -#: src/slic3r/GUI/ConfigWizard.cpp:606 -msgid "" -"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " -"no heated bed." -msgstr "" -"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " -"no heated bed." - -#: src/slic3r/GUI/ConfigWizard.cpp:609 -msgid "Bed Temperature:" -msgstr "Bed Temperature:" - -#: src/slic3r/GUI/ConfigWizard.cpp:1001 -msgid "Select all standard printers" -msgstr "Select all standard printers" - -#: src/slic3r/GUI/ConfigWizard.cpp:1004 -msgid "< &Back" -msgstr "< &Back" - -#: src/slic3r/GUI/ConfigWizard.cpp:1005 -msgid "&Next >" -msgstr "&Next >" - -#: src/slic3r/GUI/ConfigWizard.cpp:1006 -msgid "&Finish" -msgstr "&Finish" - -#: src/slic3r/GUI/ConfigWizard.cpp:1007 src/slic3r/GUI/FirmwareDialog.cpp:142 -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37 -#: src/slic3r/GUI/ProgressStatusBar.cpp:28 -msgid "Cancel" -msgstr "Cancel" - -#: src/slic3r/GUI/ConfigWizard.cpp:1021 -msgid "Prusa FFF Technology Printers" -msgstr "Prusa FFF Technology Printers" - -#: src/slic3r/GUI/ConfigWizard.cpp:1024 -msgid "Prusa MSLA Technology Printers" -msgstr "Prusa MSLA Technology Printers" - -#: src/slic3r/GUI/ConfigWizard.cpp:1111 -msgid "Configuration Wizard" -msgstr "Configuration Wizard" - -#: src/slic3r/GUI/ConfigWizard.cpp:1112 -msgid "Configuration &Wizard" -msgstr "Configuration &Wizard" - -#: src/slic3r/GUI/ConfigWizard.cpp:1114 -msgid "Configuration Assistant" -msgstr "Configuration Assistant" - -#: src/slic3r/GUI/ConfigWizard.cpp:1115 -msgid "Configuration &Assistant" -msgstr "Configuration &Assistant" - -#: src/slic3r/GUI/Field.cpp:112 -msgid "default value" -msgstr "default value" - -#: src/slic3r/GUI/Field.cpp:115 -msgid "parameter name" -msgstr "parameter name" - -#: src/slic3r/GUI/Field.cpp:143 -#, c-format -msgid "%s doesn't support percentage" -msgstr "%s doesn't support percentage" - -#: src/slic3r/GUI/Field.cpp:157 src/slic3r/GUI/Field.cpp:180 -msgid "Invalid numeric input." -msgstr "Invalid numeric input." - -#: src/slic3r/GUI/Field.cpp:162 -msgid "Input value is out of range" -msgstr "Input value is out of range" - -#: src/slic3r/GUI/Field.cpp:188 -#, c-format -msgid "" -"Do you mean %d%% instead of %d %s?\n" -"Select YES if you want to change this value to %d%%, \n" -"or NO if you are sure that %d %s is a correct value." -msgstr "" -"Do you mean %d%% instead of %d %s?\n" -"Select YES if you want to change this value to %d%%, \n" -"or NO if you are sure that %d %s is a correct value." - -#: src/slic3r/GUI/Field.cpp:191 -msgid "Parameter validation" -msgstr "Parameter validation" - -#: src/slic3r/GUI/FirmwareDialog.cpp:141 -msgid "Flash!" -msgstr "Flash!" - -#: src/slic3r/GUI/FirmwareDialog.cpp:143 -msgid "Flashing in progress. Please do not disconnect the printer!" -msgstr "Flashing in progress. Please do not disconnect the printer!" - -#: src/slic3r/GUI/FirmwareDialog.cpp:187 -msgid "Flashing failed: " -msgstr "Flashing failed: " - -#: src/slic3r/GUI/FirmwareDialog.cpp:268 -msgid "Flashing succeeded!" -msgstr "Flashing succeeded!" - -#: src/slic3r/GUI/FirmwareDialog.cpp:269 -msgid "Flashing failed. Please see the avrdude log below." -msgstr "Flashing failed. Please see the avrdude log below." - -#: src/slic3r/GUI/FirmwareDialog.cpp:270 -msgid "Flashing cancelled." -msgstr "Flashing cancelled." - -#: src/slic3r/GUI/FirmwareDialog.cpp:308 -#, c-format -msgid "" -"This firmware hex file does not match the printer model.\n" -"The hex file is intended for: %s\n" -"Printer reported: %s\n" -"\n" -"Do you want to continue and flash this hex file anyway?\n" -"Please only continue if you are sure this is the right thing to do." -msgstr "" -"This firmware hex file does not match the printer model.\n" -"The hex file is intended for: %s\n" -"Printer reported: %s\n" -"\n" -"Do you want to continue and flash this hex file anyway?\n" -"Please only continue if you are sure this is the right thing to do." - -#: src/slic3r/GUI/FirmwareDialog.cpp:395 src/slic3r/GUI/FirmwareDialog.cpp:431 -#, c-format -msgid "" -"Multiple %s devices found. Please only connect one at a time for flashing." -msgstr "" -"Multiple %s devices found. Please only connect one at a time for flashing." - -#: src/slic3r/GUI/FirmwareDialog.cpp:412 -#, c-format -msgid "" -"The %s device was not found.\n" -"If the device is connected, please press the Reset button next to the USB " -"connector ..." -msgstr "" -"The %s device was not found.\n" -"If the device is connected, please press the Reset button next to the USB " -"connector ..." - -#: src/slic3r/GUI/FirmwareDialog.cpp:525 -#, c-format -msgid "The %s device could not have been found" -msgstr "The %s device could not have been found" - -#: src/slic3r/GUI/FirmwareDialog.cpp:603 -#, c-format -msgid "Error accessing port at %s: %s" -msgstr "Error accessing port at %s: %s" - -#: src/slic3r/GUI/FirmwareDialog.cpp:605 -#, c-format -msgid "Error: %s" -msgstr "Error: %s" - -#: src/slic3r/GUI/FirmwareDialog.cpp:735 -msgid "Firmware flasher" -msgstr "Firmware flasher" - -#: src/slic3r/GUI/FirmwareDialog.cpp:762 -msgid "Firmware image:" -msgstr "Firmware image:" - -#: src/slic3r/GUI/FirmwareDialog.cpp:766 -msgid "Serial port:" -msgstr "Serial port:" - -#: src/slic3r/GUI/FirmwareDialog.cpp:768 -msgid "Autodetected" -msgstr "Autodetected" - -#: src/slic3r/GUI/FirmwareDialog.cpp:769 -msgid "Rescan" -msgstr "Rescan" - -#: src/slic3r/GUI/FirmwareDialog.cpp:776 -msgid "Progress:" -msgstr "Progress:" - -#: src/slic3r/GUI/FirmwareDialog.cpp:779 -msgid "Status:" -msgstr "Status:" - -#: src/slic3r/GUI/FirmwareDialog.cpp:780 -msgid "Ready" -msgstr "Ready" - -#: src/slic3r/GUI/FirmwareDialog.cpp:800 -msgid "Advanced: Output log" -msgstr "Advanced: Output log" - -#: src/slic3r/GUI/FirmwareDialog.cpp:811 -#: src/slic3r/GUI/PrintHostDialogs.cpp:161 -msgid "Close" -msgstr "Close" - -#: src/slic3r/GUI/FirmwareDialog.cpp:859 -msgid "" -"Are you sure you want to cancel firmware flashing?\n" -"This could leave your printer in an unusable state!" -msgstr "" -"Are you sure you want to cancel firmware flashing?\n" -"This could leave your printer in an unusable state!" - -#: src/slic3r/GUI/FirmwareDialog.cpp:860 -msgid "Confirmation" -msgstr "Confirmation" - -#: src/slic3r/GUI/FirmwareDialog.cpp:863 -msgid "Cancelling..." -msgstr "Cancelling..." - -#: src/slic3r/GUI/GLCanvas3D.cpp:709 -msgid "Detected object outside print volume" -msgstr "Detected object outside print volume" - -#: src/slic3r/GUI/GLCanvas3D.cpp:710 -msgid "Detected toolpath outside print volume" -msgstr "Detected toolpath outside print volume" - -#: src/slic3r/GUI/GLCanvas3D.cpp:711 -msgid "Some objects are not visible when editing supports" -msgstr "Some objects are not visible when editing supports" - -#: src/slic3r/GUI/GLCanvas3D.cpp:713 -msgid "" -"Detected object outside print volume\n" -"Resolve a clash to continue slicing/export process correctly" -msgstr "" -"Detected object outside print volume\n" -"Resolve a clash to continue slicing/export process correctly" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35 -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195 -msgid "Rotate lower part upwards" -msgstr "Rotate lower part upwards" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36 -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198 -msgid "Perform cut" -msgstr "Perform cut" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43 -msgid "Cut object:" -msgstr "Cut object:" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88 -msgid "Cut [C]" -msgstr "Cut [C]" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3006 -msgid "Cut" -msgstr "Cut" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193 -msgid "Keep upper part" -msgstr "Keep upper part" - -#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194 -msgid "Keep lower part" -msgstr "Keep lower part" - -#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32 -msgid "Place on face [F]" -msgstr "Place on face [F]" - -#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51 -msgid "Move [M]" -msgstr "Move [M]" - -#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176 -msgid "Position (mm)" -msgstr "Position (mm)" - -#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176 -msgid "Displacement (mm)" -msgstr "Displacement (mm)" - -#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458 -msgid "Rotate [R]" -msgstr "Rotate [R]" - -#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491 -msgid "Rotation (deg)" -msgstr "Rotation (deg)" - -#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51 -msgid "Scale [S]" -msgstr "Scale [S]" - -#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276 -msgid "Scale (%)" -msgstr "Scale (%)" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:597 -msgid "Left mouse click - add point" -msgstr "Left mouse click - add point" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:598 -msgid "Right mouse click - remove point" -msgstr "Right mouse click - remove point" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:599 -msgid "Shift + Left (+ drag) - select point(s)" -msgstr "Shift + Left (+ drag) - select point(s)" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:606 -msgid "Head diameter: " -msgstr "Head diameter: " - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:618 -msgid "Lock supports under new islands" -msgstr "Lock supports under new islands" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:622 -msgid "Remove selected points" -msgstr "Remove selected points" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:626 -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:679 -msgid "Remove all points" -msgstr "Remove all points" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:631 -msgid "Apply changes" -msgstr "Apply changes" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:636 -msgid "Discard changes" -msgstr "Discard changes" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:644 -msgid "Minimal points distance: " -msgstr "Minimal points distance: " - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:655 -msgid "Support points density: " -msgstr "Support points density: " - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:669 -msgid "Auto-generate points [A]" -msgstr "Auto-generate points [A]" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:675 -msgid "Manual editing [M]" -msgstr "Manual editing [M]" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:738 -msgid "SLA Support Points [L]" -msgstr "SLA Support Points [L]" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:767 -msgid "Do you want to save your manually edited support points ?\n" -msgstr "Do you want to save your manually edited support points ?\n" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:768 -msgid "Save changes?" -msgstr "Save changes?" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 -msgid "" -"Autogeneration will erase all manually edited points.\n" -"\n" -"Are you sure you want to do it?\n" -msgstr "" -"Autogeneration will erase all manually edited points.\n" -"\n" -"Are you sure you want to do it?\n" - -#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:899 src/slic3r/GUI/GUI.cpp:288 -#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328 -msgid "Warning" -msgstr "Warning" - -#: src/slic3r/GUI/GUI.cpp:147 src/slic3r/GUI/Tab.cpp:2720 -msgid "It's impossible to print multi-part object(s) with SLA technology." -msgstr "It's impossible to print multi-part object(s) with SLA technology." - -#: src/slic3r/GUI/GUI.cpp:148 -msgid "Please check and fix your object list." -msgstr "Please check and fix your object list." - -#: src/slic3r/GUI/GUI.cpp:149 src/slic3r/GUI/GUI_App.cpp:679 -#: src/slic3r/GUI/Tab.cpp:2722 -msgid "Attention!" -msgstr "Attention!" - -#: src/slic3r/GUI/GUI.cpp:282 -msgid "Notice" -msgstr "Notice" - -#: src/slic3r/GUI/GUI_App.cpp:318 -msgid "Changing of an application language" -msgstr "Changing of an application language" - -#: src/slic3r/GUI/GUI_App.cpp:326 src/slic3r/GUI/GUI_App.cpp:335 -msgid "Recreating" -msgstr "Recreating" - -#: src/slic3r/GUI/GUI_App.cpp:339 -msgid "Loading of a current presets" -msgstr "Loading of a current presets" - -#: src/slic3r/GUI/GUI_App.cpp:347 -msgid "Loading of a mode view" -msgstr "Loading of a mode view" - -#: src/slic3r/GUI/GUI_App.cpp:429 -msgid "Choose one file (3MF):" -msgstr "Choose one file (3MF):" - -#: src/slic3r/GUI/GUI_App.cpp:441 -msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" - -#: src/slic3r/GUI/GUI_App.cpp:454 -msgid "Array of language names and identifiers should have the same size." -msgstr "Array of language names and identifiers should have the same size." - -#: src/slic3r/GUI/GUI_App.cpp:464 -msgid "Select the language" -msgstr "Select the language" - -#: src/slic3r/GUI/GUI_App.cpp:464 -msgid "Language" -msgstr "Language" - -#: src/slic3r/GUI/GUI_App.cpp:534 src/slic3r/GUI/GUI_ObjectList.cpp:1067 -#: src/libslic3r/PrintConfig.cpp:298 -msgid "Default" -msgstr "Default" - -#: src/slic3r/GUI/GUI_App.cpp:603 -msgid "&Configuration Snapshots" -msgstr "&Configuration Snapshots" - -#: src/slic3r/GUI/GUI_App.cpp:603 -msgid "Inspect / activate configuration snapshots" -msgstr "Inspect / activate configuration snapshots" - -#: src/slic3r/GUI/GUI_App.cpp:604 -msgid "Take Configuration &Snapshot" -msgstr "Take Configuration &Snapshot" - -#: src/slic3r/GUI/GUI_App.cpp:604 -msgid "Capture a configuration snapshot" -msgstr "Capture a configuration snapshot" - -#: src/slic3r/GUI/GUI_App.cpp:607 -msgid "&Preferences" -msgstr "&Preferences" - -#: src/slic3r/GUI/GUI_App.cpp:613 -msgid "Application preferences" -msgstr "Application preferences" - -#: src/slic3r/GUI/GUI_App.cpp:616 src/slic3r/GUI/wxExtensions.cpp:2446 -msgid "Simple" -msgstr "Simple" - -#: src/slic3r/GUI/GUI_App.cpp:616 -msgid "Simple View Mode" -msgstr "Simple View Mode" - -#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:73 -#: src/slic3r/GUI/Tab.cpp:977 src/slic3r/GUI/Tab.cpp:992 -#: src/slic3r/GUI/Tab.cpp:1090 src/slic3r/GUI/Tab.cpp:1093 -#: src/slic3r/GUI/Tab.cpp:1466 src/slic3r/GUI/Tab.cpp:1890 -#: src/slic3r/GUI/Tab.cpp:3347 src/slic3r/GUI/wxExtensions.cpp:2447 -#: src/libslic3r/PrintConfig.cpp:72 src/libslic3r/PrintConfig.cpp:186 -#: src/libslic3r/PrintConfig.cpp:349 src/libslic3r/PrintConfig.cpp:987 -#: src/libslic3r/PrintConfig.cpp:2173 -msgid "Advanced" -msgstr "Advanced" - -#: src/slic3r/GUI/GUI_App.cpp:617 -msgid "Advanced View Mode" -msgstr "Advanced View Mode" - -#: src/slic3r/GUI/GUI_App.cpp:618 src/slic3r/GUI/wxExtensions.cpp:2448 -msgid "Expert" -msgstr "Expert" - -#: src/slic3r/GUI/GUI_App.cpp:618 -msgid "Expert View Mode" -msgstr "Expert View Mode" - -#: src/slic3r/GUI/GUI_App.cpp:623 -msgid "Mode" -msgstr "Mode" - -#: src/slic3r/GUI/GUI_App.cpp:623 -msgid "Slic3r View Mode" -msgstr "Slic3r View Mode" - -#: src/slic3r/GUI/GUI_App.cpp:625 -msgid "Change Application &Language" -msgstr "Change Application &Language" - -#: src/slic3r/GUI/GUI_App.cpp:627 -msgid "Flash printer &firmware" -msgstr "Flash printer &firmware" - -#: src/slic3r/GUI/GUI_App.cpp:627 -msgid "Upload a firmware image into an Arduino based printer" -msgstr "Upload a firmware image into an Arduino based printer" - -#: src/slic3r/GUI/GUI_App.cpp:639 -msgid "Taking configuration snapshot" -msgstr "Taking configuration snapshot" - -#: src/slic3r/GUI/GUI_App.cpp:639 -msgid "Snapshot name" -msgstr "Snapshot name" - -#: src/slic3r/GUI/GUI_App.cpp:676 -msgid "Application will be restarted after language change." -msgstr "Application will be restarted after language change." - -#: src/slic3r/GUI/GUI_App.cpp:677 -msgid "3D-Scene will be cleaned." -msgstr "3D-Scene will be cleaned." - -#: src/slic3r/GUI/GUI_App.cpp:678 -msgid "Please, check your changes before." -msgstr "Please, check your changes before." - -#: src/slic3r/GUI/GUI_App.cpp:706 -msgid "&Configuration" -msgstr "&Configuration" - -#: src/slic3r/GUI/GUI_App.cpp:726 -msgid "You have unsaved changes " -msgstr "You have unsaved changes " - -#: src/slic3r/GUI/GUI_App.cpp:726 -msgid ". Discard changes and continue anyway?" -msgstr ". Discard changes and continue anyway?" - -#: src/slic3r/GUI/GUI_App.cpp:727 -msgid "Unsaved Presets" -msgstr "Unsaved Presets" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:65 -#: src/libslic3r/PrintConfig.cpp:56 src/libslic3r/PrintConfig.cpp:149 -#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:437 -#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:841 -#: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:1304 -#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1551 -#: src/libslic3r/PrintConfig.cpp:1986 src/libslic3r/PrintConfig.cpp:2042 -msgid "Layers and Perimeters" -msgstr "Layers and Perimeters" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:66 -#: src/slic3r/GUI/Plater.cpp:431 src/slic3r/GUI/Tab.cpp:981 -#: src/slic3r/GUI/Tab.cpp:982 src/slic3r/GUI/Tab.cpp:1311 -#: src/libslic3r/PrintConfig.cpp:166 src/libslic3r/PrintConfig.cpp:388 -#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:742 -#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:932 -#: src/libslic3r/PrintConfig.cpp:942 src/libslic3r/PrintConfig.cpp:960 -#: src/libslic3r/PrintConfig.cpp:978 src/libslic3r/PrintConfig.cpp:997 -#: src/libslic3r/PrintConfig.cpp:1658 src/libslic3r/PrintConfig.cpp:1675 -msgid "Infill" -msgstr "Infill" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:67 -#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1010 -#: src/slic3r/GUI/Tab.cpp:1011 src/libslic3r/PrintConfig.cpp:333 -#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1779 -#: src/libslic3r/PrintConfig.cpp:1785 src/libslic3r/PrintConfig.cpp:1793 -#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1815 -#: src/libslic3r/PrintConfig.cpp:1823 src/libslic3r/PrintConfig.cpp:1838 -#: src/libslic3r/PrintConfig.cpp:1859 src/libslic3r/PrintConfig.cpp:1870 -#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:1895 -#: src/libslic3r/PrintConfig.cpp:1904 src/libslic3r/PrintConfig.cpp:1915 -#: src/libslic3r/PrintConfig.cpp:1929 src/libslic3r/PrintConfig.cpp:1937 -#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1947 -#: src/libslic3r/PrintConfig.cpp:1955 src/libslic3r/PrintConfig.cpp:1969 -#: src/libslic3r/GCode/PreviewData.cpp:172 -msgid "Support material" -msgstr "Support material" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:69 -#: src/slic3r/GUI/Tab.cpp:1070 src/slic3r/GUI/Tab.cpp:1794 -#: src/libslic3r/PrintConfig.cpp:455 src/libslic3r/PrintConfig.cpp:953 -#: src/libslic3r/PrintConfig.cpp:1339 src/libslic3r/PrintConfig.cpp:1667 -#: src/libslic3r/PrintConfig.cpp:1851 src/libslic3r/PrintConfig.cpp:1877 -#: src/libslic3r/PrintConfig.cpp:2149 src/libslic3r/PrintConfig.cpp:2157 -msgid "Extruders" -msgstr "Extruders" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:39 -msgid "Pad and Support" -msgstr "Pad and Support" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:68 src/slic3r/GUI/GUI_Preview.cpp:215 -#: src/slic3r/GUI/Tab.cpp:1035 src/libslic3r/PrintConfig.cpp:198 -#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:870 -#: src/libslic3r/PrintConfig.cpp:998 src/libslic3r/PrintConfig.cpp:1360 -#: src/libslic3r/PrintConfig.cpp:1597 src/libslic3r/PrintConfig.cpp:1646 -#: src/libslic3r/PrintConfig.cpp:1697 src/libslic3r/PrintConfig.cpp:2028 -msgid "Speed" -msgstr "Speed" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:70 src/libslic3r/PrintConfig.cpp:415 -#: src/libslic3r/PrintConfig.cpp:522 src/libslic3r/PrintConfig.cpp:829 -#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1348 -#: src/libslic3r/PrintConfig.cpp:1687 src/libslic3r/PrintConfig.cpp:1860 -#: src/libslic3r/PrintConfig.cpp:2017 -msgid "Extrusion Width" -msgstr "Extrusion Width" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:75 src/slic3r/GUI/Plater.cpp:410 -#: src/slic3r/GUI/Tab.cpp:3309 src/slic3r/GUI/Tab.cpp:3310 -#: src/libslic3r/PrintConfig.cpp:2359 src/libslic3r/PrintConfig.cpp:2366 -#: src/libslic3r/PrintConfig.cpp:2375 src/libslic3r/PrintConfig.cpp:2384 -#: src/libslic3r/PrintConfig.cpp:2394 src/libslic3r/PrintConfig.cpp:2420 -#: src/libslic3r/PrintConfig.cpp:2427 src/libslic3r/PrintConfig.cpp:2438 -#: src/libslic3r/PrintConfig.cpp:2448 src/libslic3r/PrintConfig.cpp:2457 -#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2476 -#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496 -#: src/libslic3r/PrintConfig.cpp:2504 -msgid "Supports" -msgstr "Supports" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:76 src/slic3r/GUI/Tab.cpp:3337 -#: src/slic3r/GUI/Tab.cpp:3338 src/libslic3r/PrintConfig.cpp:2512 -#: src/libslic3r/PrintConfig.cpp:2519 src/libslic3r/PrintConfig.cpp:2530 -#: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2553 -#: src/libslic3r/PrintConfig.cpp:2562 -msgid "Pad" -msgstr "Pad" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:173 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:45 -msgid "Name" -msgstr "Name" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:201 -msgid "Right button click the icon to change the object settings" -msgstr "Right button click the icon to change the object settings" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:209 -#, c-format -msgid "Auto-repaired (%d errors):\n" -msgstr "Auto-repaired (%d errors):\n" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:212 -msgid "degenerate facets" -msgstr "degenerate facets" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:213 -msgid "edges fixed" -msgstr "edges fixed" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:214 -msgid "facets removed" -msgstr "facets removed" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:215 -msgid "facets added" -msgstr "facets added" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:216 -msgid "facets reversed" -msgstr "facets reversed" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:217 -msgid "backwards edges" -msgstr "backwards edges" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:231 -msgid "Right button click the icon to fix STL through Netfabb" -msgstr "Right button click the icon to fix STL through Netfabb" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:278 src/slic3r/GUI/Tab.cpp:1430 -#: src/libslic3r/PrintConfig.cpp:454 -msgid "Extruder" -msgstr "Extruder" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:683 src/slic3r/GUI/GUI_ObjectList.cpp:963 -#: src/slic3r/GUI/GUI_ObjectList.cpp:969 src/slic3r/GUI/GUI_ObjectList.cpp:1199 -#, c-format -msgid "Quick Add Settings (%s)" -msgstr "Quick Add Settings (%s)" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:746 -msgid "Select showing settings" -msgstr "Select showing settings" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:874 -msgid "Load" -msgstr "Load" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:879 src/slic3r/GUI/GUI_ObjectList.cpp:911 -#: src/slic3r/GUI/GUI_ObjectList.cpp:914 -msgid "Box" -msgstr "Box" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:879 -msgid "Cylinder" -msgstr "Cylinder" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:879 -msgid "Sphere" -msgstr "Sphere" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:879 -msgid "Slab" -msgstr "Slab" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:890 src/slic3r/GUI/GUI_ObjectList.cpp:906 -msgid "Add part" -msgstr "Add part" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:891 -msgid "Add modifier" -msgstr "Add modifier" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:892 src/slic3r/GUI/GUI_ObjectList.cpp:910 -msgid "Add support enforcer" -msgstr "Add support enforcer" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:893 src/slic3r/GUI/GUI_ObjectList.cpp:913 -msgid "Add support blocker" -msgstr "Add support blocker" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:934 -msgid "Split to parts" -msgstr "Split to parts" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:942 -msgid "Add settings" -msgstr "Add settings" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1009 -msgid "Change type" -msgstr "Change type" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1016 -#: src/slic3r/GUI/GUI_ObjectList.cpp:1153 -msgid "Set as a Separated Object" -msgstr "Set as a Separated Object" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1024 -msgid "Rename" -msgstr "Rename" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1034 -msgid "Fix through the Netfabb" -msgstr "Fix through the Netfabb" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1041 src/slic3r/GUI/Plater.cpp:2861 -msgid "Export as STL" -msgstr "Export as STL" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1048 -msgid "Change extruder" -msgstr "Change extruder" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1073 -msgid "Select new extruder for the object/part" -msgstr "Select new extruder for the object/part" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1079 src/slic3r/GUI/Plater.cpp:2825 -#: src/slic3r/GUI/Plater.cpp:2843 src/slic3r/GUI/Tab.cpp:2860 -msgid "Delete" -msgstr "Delete" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1153 -msgid "Set as a Separated Objects" -msgstr "Set as a Separated Objects" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1374 -msgid "Generic" -msgstr "Generic" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1516 -msgid "You can't delete the last solid part from object." -msgstr "You can't delete the last solid part from object." - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1533 -msgid "You can't delete the last intance from object." -msgstr "You can't delete the last intance from object." - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1560 src/slic3r/GUI/Plater.cpp:2219 -msgid "" -"The selected object couldn't be split because it contains only one part." -msgstr "" -"The selected object couldn't be split because it contains only one part." - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1676 -msgid "Group manipulation" -msgstr "Group manipulation" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1688 -msgid "Object manipulation" -msgstr "Object manipulation" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1698 -msgid "Object Settings to modify" -msgstr "Object Settings to modify" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1702 -msgid "Part Settings to modify" -msgstr "Part Settings to modify" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1711 -msgid "Part manipulation" -msgstr "Part manipulation" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:1717 -msgid "Instance manipulation" -msgstr "Instance manipulation" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2240 -msgid "Object or Instance" -msgstr "Object or Instance" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2240 -msgid "Part" -msgstr "Part" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2242 -msgid "Unsupported selection" -msgstr "Unsupported selection" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2243 -#, c-format -msgid "You started your selection with %s Item." -msgstr "You started your selection with %s Item." - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2244 -#, c-format -msgid "In this mode you can select only other %s Items%s" -msgstr "In this mode you can select only other %s Items%s" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2247 -msgid "of a current Object" -msgstr "of a current Object" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2252 -#: src/slic3r/GUI/GUI_ObjectList.cpp:2325 src/slic3r/GUI/Plater.cpp:117 -msgid "Info" -msgstr "Info" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2366 -msgid "You can't change a type of the last solid part of the object." -msgstr "You can't change a type of the last solid part of the object." - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2373 -msgid "Select type of part" -msgstr "Select type of part" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2538 -msgid "Enter new name" -msgstr "Enter new name" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2538 -msgid "Renaming" -msgstr "Renaming" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2554 -#: src/slic3r/GUI/GUI_ObjectList.cpp:2632 src/slic3r/GUI/Tab.cpp:3191 -#: src/slic3r/GUI/Tab.cpp:3195 -msgid "The supplied name is not valid;" -msgstr "The supplied name is not valid;" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2555 -#: src/slic3r/GUI/GUI_ObjectList.cpp:2633 src/slic3r/GUI/Tab.cpp:3192 -msgid "the following characters are not allowed:" -msgstr "the following characters are not allowed:" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2653 -msgid "Set extruder for selected items" -msgstr "Set extruder for selected items" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2654 -msgid "Select extruder number for selected objects and/or parts" -msgstr "Select extruder number for selected objects and/or parts" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2667 -msgid "Select extruder number:" -msgstr "Select extruder number:" - -#: src/slic3r/GUI/GUI_ObjectList.cpp:2668 -msgid "This extruder will be set for selected items" -msgstr "This extruder will be set for selected items" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:25 -msgid "Object Manipulation" -msgstr "Object Manipulation" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:47 -msgid "Object name" -msgstr "Object name" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:160 -msgid "Position" -msgstr "Position" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:116 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 -msgid "Rotation" -msgstr "Rotation" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:117 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221 -#: src/libslic3r/PrintConfig.cpp:3070 -msgid "Scale" -msgstr "Scale" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:162 -msgid "Scale factors" -msgstr "Scale factors" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:200 -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:220 -#: src/libslic3r/PrintConfig.cpp:3055 -msgid "Rotate" -msgstr "Rotate" - -#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219 -msgid "Translate" -msgstr "Translate" - -#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58 -msgid "Additional Settings" -msgstr "Additional Settings" - -#: src/slic3r/GUI/GUI_Preview.cpp:209 -msgid "View" -msgstr "View" - -#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:525 -#: src/libslic3r/GCode/PreviewData.cpp:394 -msgid "Feature type" -msgstr "Feature type" - -#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:467 -msgid "Height" -msgstr "Height" - -#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2135 -msgid "Width" -msgstr "Width" - -#: src/slic3r/GUI/GUI_Preview.cpp:216 -msgid "Volumetric flow rate" -msgstr "Volumetric flow rate" - -#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315 -#: src/slic3r/GUI/GUI_Preview.cpp:469 src/slic3r/GUI/GUI_Preview.cpp:525 -#: src/slic3r/GUI/GUI_Preview.cpp:701 src/libslic3r/GCode/PreviewData.cpp:404 -msgid "Tool" -msgstr "Tool" - -#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:523 -#: src/libslic3r/GCode/PreviewData.cpp:406 -msgid "Color Print" -msgstr "Color Print" - -#: src/slic3r/GUI/GUI_Preview.cpp:221 -msgid "Show" -msgstr "Show" - -#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225 -msgid "Feature types" -msgstr "Feature types" - -#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163 -msgid "Perimeter" -msgstr "Perimeter" - -#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164 -msgid "External perimeter" -msgstr "External perimeter" - -#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165 -msgid "Overhang perimeter" -msgstr "Overhang perimeter" - -#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166 -msgid "Internal infill" -msgstr "Internal infill" - -#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1686 -#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/GCode/PreviewData.cpp:167 -msgid "Solid infill" -msgstr "Solid infill" - -#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2016 -#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/GCode/PreviewData.cpp:168 -msgid "Top solid infill" -msgstr "Top solid infill" - -#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169 -msgid "Bridge infill" -msgstr "Bridge infill" - -#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:869 -#: src/libslic3r/GCode/PreviewData.cpp:170 -msgid "Gap fill" -msgstr "Gap fill" - -#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1001 -#: src/libslic3r/GCode/PreviewData.cpp:171 -msgid "Skirt" -msgstr "Skirt" - -#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1903 -#: src/libslic3r/GCode/PreviewData.cpp:173 -msgid "Support material interface" -msgstr "Support material interface" - -#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1081 -#: src/libslic3r/GCode/PreviewData.cpp:174 -msgid "Wipe tower" -msgstr "Wipe tower" - -#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2049 -msgid "Travel" -msgstr "Travel" - -#: src/slic3r/GUI/GUI_Preview.cpp:244 -msgid "Retractions" -msgstr "Retractions" - -#: src/slic3r/GUI/GUI_Preview.cpp:245 -msgid "Unretractions" -msgstr "Unretractions" - -#: src/slic3r/GUI/GUI_Preview.cpp:246 -msgid "Shells" -msgstr "Shells" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 -msgid "Slic3r Prusa Edition - Keyboard Shortcuts" -msgstr "Slic3r Prusa Edition - Keyboard Shortcuts" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:100 -msgid "Open project STL/OBJ/AMF/3MF with config, delete bed" -msgstr "Open project STL/OBJ/AMF/3MF with config, delete bed" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:101 -msgid "Import STL/OBJ/AMF/3MF without config, keep bed" -msgstr "Import STL/OBJ/AMF/3MF without config, keep bed" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:102 -msgid "Load Config from .ini/amf/3mf/gcode" -msgstr "Load Config from .ini/amf/3mf/gcode" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:103 src/slic3r/GUI/Plater.cpp:725 -#: src/slic3r/GUI/Plater.cpp:3673 src/libslic3r/PrintConfig.cpp:2957 -msgid "Export G-code" -msgstr "Export G-code" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 -msgid "Save project (3MF)" -msgstr "Save project (3MF)" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:105 -msgid "Load Config from .ini/amf/3mf/gcode and merge" -msgstr "Load Config from .ini/amf/3mf/gcode and merge" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:106 -msgid "(Re)slice" -msgstr "(Re)slice" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 -msgid "Quick slice" -msgstr "Quick slice" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/MainFrame.cpp:326 -msgid "Repeat last quick slice" -msgstr "Repeat last quick slice" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 -msgid "Select Plater Tab" -msgstr "Select Plater Tab" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 -msgid "Quick slice and Save as" -msgstr "Quick slice and Save as" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:111 -msgid "Select Print Settings Tab" -msgstr "Select Print Settings Tab" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:112 -msgid "Select Filament Settings Tab" -msgstr "Select Filament Settings Tab" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:113 -msgid "Select Printer Settings Tab" -msgstr "Select Printer Settings Tab" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:114 -msgid "Switch to 3D" -msgstr "Switch to 3D" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 -msgid "Switch to Preview" -msgstr "Switch to Preview" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Preferences.cpp:10 -msgid "Preferences" -msgstr "Preferences" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:117 -#: src/slic3r/GUI/PrintHostDialogs.cpp:134 -msgid "Print host upload queue" -msgstr "Print host upload queue" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:118 -msgid "Camera view " -msgstr "Camera view " - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:119 -msgid "Add Instance to selected object " -msgstr "Add Instance to selected object " - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:120 -msgid "Remove Instance from selected object" -msgstr "Remove Instance from selected object" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:121 -msgid "Show keyboard shortcuts list" -msgstr "Show keyboard shortcuts list" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 -msgid "Select multiple object/Move multiple object" -msgstr "Select multiple object/Move multiple object" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 -msgid "Main Shortcuts" -msgstr "Main Shortcuts" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:130 -msgid "Arrange" -msgstr "Arrange" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:131 -msgid "Select All objects" -msgstr "Select All objects" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 -msgid "Delete selected" -msgstr "Delete selected" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:133 -msgid "Delete All" -msgstr "Delete All" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:134 -msgid "Gizmo move" -msgstr "Gizmo move" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:135 -msgid "Gizmo scale" -msgstr "Gizmo scale" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:136 -msgid "Gizmo rotate" -msgstr "Gizmo rotate" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:137 -msgid "Gizmo cut" -msgstr "Gizmo cut" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:138 -msgid "Gizmo Place face on bed" -msgstr "Gizmo Place face on bed" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:139 -msgid "Gizmo SLA support points" -msgstr "Gizmo SLA support points" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:140 -#, no-c-format -msgid "" -"Press to snap by 5% in Gizmo scale\n" -"or by 1mm in Gizmo move" -msgstr "" -"Press to snap by 5% in Gizmo scale\n" -"or by 1mm in Gizmo move" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 -msgid "" -"Press to scale or rotate selected objects\n" -"around their own center" -msgstr "" -"Press to scale or rotate selected objects\n" -"around their own center" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:142 -msgid "Zoom to Bed" -msgstr "Zoom to Bed" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 -msgid "Zoom to all objects in scene, if none selected" -msgstr "Zoom to all objects in scene, if none selected" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:144 -msgid "Zoom to selected object" -msgstr "Zoom to selected object" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:145 -msgid "Zoom in" -msgstr "Zoom in" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:146 -msgid "Zoom out" -msgstr "Zoom out" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:147 -msgid "Unselect gizmo, keep object selection" -msgstr "Unselect gizmo, keep object selection" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:149 -msgid "Plater Shortcuts" -msgstr "Plater Shortcuts" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:164 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:175 -msgid "Arrow Up" -msgstr "Arrow Up" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:164 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:166 -msgid "Upper Layer" -msgstr "Upper Layer" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:165 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:176 -msgid "Arrow Down" -msgstr "Arrow Down" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:165 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:167 -msgid "Lower Layer" -msgstr "Lower Layer" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:169 -msgid "Preview Shortcuts" -msgstr "Preview Shortcuts" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:175 -msgid "Move current slider thump Up" -msgstr "Move current slider thump Up" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:176 -msgid "Move current slider thump Down" -msgstr "Move current slider thump Down" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:177 -msgid "Arrow Left" -msgstr "Arrow Left" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:177 -msgid "Set upper thumb to current slider thumb" -msgstr "Set upper thumb to current slider thumb" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:178 -msgid "Arrow Right" -msgstr "Arrow Right" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:178 -msgid "Set lower thumb to current slider thumb" -msgstr "Set lower thumb to current slider thumb" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:179 -msgid "Add color change marker for current layer" -msgstr "Add color change marker for current layer" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:180 -msgid "Delete color change marker for current layer" -msgstr "Delete color change marker for current layer" - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:182 -msgid "Layers Slider Shortcuts" -msgstr "Layers Slider Shortcuts" - -#: src/slic3r/GUI/MainFrame.cpp:54 -msgid "" -" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases" -msgstr "" -" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases" - -#: src/slic3r/GUI/MainFrame.cpp:160 -msgid "Plater" -msgstr "Plater" - -#: src/slic3r/GUI/MainFrame.cpp:273 -msgid "&Open Project" -msgstr "&Open Project" - -#: src/slic3r/GUI/MainFrame.cpp:273 -msgid "Open a project file" -msgstr "Open a project file" - -#: src/slic3r/GUI/MainFrame.cpp:275 -msgid "&Save Project" -msgstr "&Save Project" - -#: src/slic3r/GUI/MainFrame.cpp:275 -msgid "Save current project file" -msgstr "Save current project file" - -#: src/slic3r/GUI/MainFrame.cpp:277 -msgid "Save Project &as" -msgstr "Save Project &as" - -#: src/slic3r/GUI/MainFrame.cpp:277 -msgid "Save current project file as" -msgstr "Save current project file as" - -#: src/slic3r/GUI/MainFrame.cpp:283 -msgid "Import STL/OBJ/AM&F/3MF" -msgstr "Import STL/OBJ/AM&F/3MF" - -#: src/slic3r/GUI/MainFrame.cpp:283 -msgid "Load a model" -msgstr "Load a model" - -#: src/slic3r/GUI/MainFrame.cpp:286 -msgid "Import &Config" -msgstr "Import &Config" - -#: src/slic3r/GUI/MainFrame.cpp:286 -msgid "Load exported configuration file" -msgstr "Load exported configuration file" - -#: src/slic3r/GUI/MainFrame.cpp:288 -msgid "Import Config from &project" -msgstr "Import Config from &project" - -#: src/slic3r/GUI/MainFrame.cpp:288 -msgid "Load configuration from project file" -msgstr "Load configuration from project file" - -#: src/slic3r/GUI/MainFrame.cpp:291 -msgid "Import Config &Bundle" -msgstr "Import Config &Bundle" - -#: src/slic3r/GUI/MainFrame.cpp:291 -msgid "Load presets from a bundle" -msgstr "Load presets from a bundle" - -#: src/slic3r/GUI/MainFrame.cpp:293 -msgid "&Import" -msgstr "&Import" - -#: src/slic3r/GUI/MainFrame.cpp:296 -msgid "Export &G-code" -msgstr "Export &G-code" - -#: src/slic3r/GUI/MainFrame.cpp:296 -msgid "Export current plate as G-code" -msgstr "Export current plate as G-code" - -#: src/slic3r/GUI/MainFrame.cpp:299 -msgid "Export plate as &STL" -msgstr "Export plate as &STL" - -#: src/slic3r/GUI/MainFrame.cpp:299 -msgid "Export current plate as STL" -msgstr "Export current plate as STL" - -#: src/slic3r/GUI/MainFrame.cpp:301 -msgid "Export plate as &AMF" -msgstr "Export plate as &AMF" - -#: src/slic3r/GUI/MainFrame.cpp:301 -msgid "Export current plate as AMF" -msgstr "Export current plate as AMF" - -#: src/slic3r/GUI/MainFrame.cpp:304 -msgid "Export &Config" -msgstr "Export &Config" - -#: src/slic3r/GUI/MainFrame.cpp:304 -msgid "Export current configuration to file" -msgstr "Export current configuration to file" - -#: src/slic3r/GUI/MainFrame.cpp:306 -msgid "Export Config &Bundle" -msgstr "Export Config &Bundle" - -#: src/slic3r/GUI/MainFrame.cpp:306 -msgid "Export all presets to file" -msgstr "Export all presets to file" - -#: src/slic3r/GUI/MainFrame.cpp:308 -msgid "&Export" -msgstr "&Export" - -#: src/slic3r/GUI/MainFrame.cpp:314 -msgid "Quick Slice" -msgstr "Quick Slice" - -#: src/slic3r/GUI/MainFrame.cpp:314 -msgid "Slice a file into a G-code" -msgstr "Slice a file into a G-code" - -#: src/slic3r/GUI/MainFrame.cpp:320 -msgid "Quick Slice and Save As" -msgstr "Quick Slice and Save As" - -#: src/slic3r/GUI/MainFrame.cpp:320 -msgid "Slice a file into a G-code, save as" -msgstr "Slice a file into a G-code, save as" - -#: src/slic3r/GUI/MainFrame.cpp:326 -msgid "Repeat Last Quick Slice" -msgstr "Repeat Last Quick Slice" - -#: src/slic3r/GUI/MainFrame.cpp:334 -msgid "(Re)Slice &Now" -msgstr "(Re)Slice &Now" - -#: src/slic3r/GUI/MainFrame.cpp:334 -msgid "Start new slicing process" -msgstr "Start new slicing process" - -#: src/slic3r/GUI/MainFrame.cpp:337 -msgid "&Repair STL file" -msgstr "&Repair STL file" - -#: src/slic3r/GUI/MainFrame.cpp:337 -msgid "Automatically repair an STL file" -msgstr "Automatically repair an STL file" - -#: src/slic3r/GUI/MainFrame.cpp:340 -msgid "&Quit" -msgstr "&Quit" - -#: src/slic3r/GUI/MainFrame.cpp:340 -msgid "Quit Slic3r" -msgstr "Quit Slic3r" - -#: src/slic3r/GUI/MainFrame.cpp:374 -msgid "&Select all" -msgstr "&Select all" - -#: src/slic3r/GUI/MainFrame.cpp:374 -msgid "Selects all objects" -msgstr "Selects all objects" - -#: src/slic3r/GUI/MainFrame.cpp:377 -msgid "&Delete selected" -msgstr "&Delete selected" - -#: src/slic3r/GUI/MainFrame.cpp:377 -msgid "Deletes the current selection" -msgstr "Deletes the current selection" - -#: src/slic3r/GUI/MainFrame.cpp:379 -msgid "Delete &all" -msgstr "Delete &all" - -#: src/slic3r/GUI/MainFrame.cpp:379 -msgid "Deletes all objects" -msgstr "Deletes all objects" - -#: src/slic3r/GUI/MainFrame.cpp:392 -msgid "&Plater Tab" -msgstr "&Plater Tab" - -#: src/slic3r/GUI/MainFrame.cpp:392 -msgid "Show the plater" -msgstr "Show the plater" - -#: src/slic3r/GUI/MainFrame.cpp:399 -msgid "P&rint Settings Tab" -msgstr "P&rint Settings Tab" - -#: src/slic3r/GUI/MainFrame.cpp:399 -msgid "Show the print settings" -msgstr "Show the print settings" - -#: src/slic3r/GUI/MainFrame.cpp:401 -msgid "&Filament Settings Tab" -msgstr "&Filament Settings Tab" - -#: src/slic3r/GUI/MainFrame.cpp:401 -msgid "Show the filament settings" -msgstr "Show the filament settings" - -#: src/slic3r/GUI/MainFrame.cpp:403 -msgid "Print&er Settings Tab" -msgstr "Print&er Settings Tab" - -#: src/slic3r/GUI/MainFrame.cpp:403 -msgid "Show the printer settings" -msgstr "Show the printer settings" - -#: src/slic3r/GUI/MainFrame.cpp:407 -msgid "3&D" -msgstr "3&D" - -#: src/slic3r/GUI/MainFrame.cpp:407 -msgid "Show the 3D editing view" -msgstr "Show the 3D editing view" - -#: src/slic3r/GUI/MainFrame.cpp:409 -msgid "Pre&view" -msgstr "Pre&view" - -#: src/slic3r/GUI/MainFrame.cpp:409 -msgid "Show the 3D slices preview" -msgstr "Show the 3D slices preview" - -#: src/slic3r/GUI/MainFrame.cpp:430 -msgid "Print &Host Upload Queue" -msgstr "Print &Host Upload Queue" - -#: src/slic3r/GUI/MainFrame.cpp:430 -msgid "Display the Print Host Upload Queue window" -msgstr "Display the Print Host Upload Queue window" - -#: src/slic3r/GUI/MainFrame.cpp:439 -msgid "Iso" -msgstr "Iso" - -#: src/slic3r/GUI/MainFrame.cpp:439 -msgid "Iso View" -msgstr "Iso View" - -#: src/slic3r/GUI/MainFrame.cpp:441 -msgid "Top" -msgstr "Top" - -#: src/libslic3r/PrintConfig.cpp:2041 -msgctxt "Layers" -msgid "Top" -msgstr "Top" - -#: src/slic3r/GUI/MainFrame.cpp:441 -msgid "Top View" -msgstr "Top View" - -#: src/slic3r/GUI/MainFrame.cpp:442 -msgid "Bottom" -msgstr "Bottom" - -#: src/libslic3r/PrintConfig.cpp:148 -msgctxt "Layers" -msgid "Bottom" -msgstr "Bottom" - -#: src/slic3r/GUI/MainFrame.cpp:442 -msgid "Bottom View" -msgstr "Bottom View" - -#: src/slic3r/GUI/MainFrame.cpp:443 -msgid "Front" -msgstr "Front" - -#: src/slic3r/GUI/MainFrame.cpp:443 -msgid "Front View" -msgstr "Front View" - -#: src/slic3r/GUI/MainFrame.cpp:444 src/libslic3r/PrintConfig.cpp:1561 -msgid "Rear" -msgstr "Rear" - -#: src/slic3r/GUI/MainFrame.cpp:444 -msgid "Rear View" -msgstr "Rear View" - -#: src/slic3r/GUI/MainFrame.cpp:445 -msgid "Left" -msgstr "Left" - -#: src/slic3r/GUI/MainFrame.cpp:445 -msgid "Left View" -msgstr "Left View" - -#: src/slic3r/GUI/MainFrame.cpp:446 -msgid "Right" -msgstr "Right" - -#: src/slic3r/GUI/MainFrame.cpp:446 -msgid "Right View" -msgstr "Right View" - -#: src/slic3r/GUI/MainFrame.cpp:460 -msgid "Prusa 3D &Drivers" -msgstr "Prusa 3D &Drivers" - -#: src/slic3r/GUI/MainFrame.cpp:460 -msgid "Open the Prusa3D drivers download page in your browser" -msgstr "Open the Prusa3D drivers download page in your browser" - -#: src/slic3r/GUI/MainFrame.cpp:462 -msgid "Prusa Edition &Releases" -msgstr "Prusa Edition &Releases" - -#: src/slic3r/GUI/MainFrame.cpp:462 -msgid "Open the Prusa Edition releases page in your browser" -msgstr "Open the Prusa Edition releases page in your browser" - -#: src/slic3r/GUI/MainFrame.cpp:468 -msgid "Slic3r &Website" -msgstr "Slic3r &Website" - -#: src/slic3r/GUI/MainFrame.cpp:468 -msgid "Open the Slic3r website in your browser" -msgstr "Open the Slic3r website in your browser" - -#: src/slic3r/GUI/MainFrame.cpp:470 -msgid "Slic3r &Manual" -msgstr "Slic3r &Manual" - -#: src/slic3r/GUI/MainFrame.cpp:470 -msgid "Open the Slic3r manual in your browser" -msgstr "Open the Slic3r manual in your browser" - -#: src/slic3r/GUI/MainFrame.cpp:473 -msgid "System &Info" -msgstr "System &Info" - -#: src/slic3r/GUI/MainFrame.cpp:473 -msgid "Show system information" -msgstr "Show system information" - -#: src/slic3r/GUI/MainFrame.cpp:475 -msgid "Show &Configuration Folder" -msgstr "Show &Configuration Folder" - -#: src/slic3r/GUI/MainFrame.cpp:475 -msgid "Show user configuration folder (datadir)" -msgstr "Show user configuration folder (datadir)" - -#: src/slic3r/GUI/MainFrame.cpp:477 -msgid "Report an I&ssue" -msgstr "Report an I&ssue" - -#: src/slic3r/GUI/MainFrame.cpp:477 -msgid "Report an issue on the Slic3r Prusa Edition" -msgstr "Report an issue on the Slic3r Prusa Edition" - -#: src/slic3r/GUI/MainFrame.cpp:479 -msgid "&About Slic3r" -msgstr "&About Slic3r" - -#: src/slic3r/GUI/MainFrame.cpp:479 -msgid "Show about dialog" -msgstr "Show about dialog" - -#: src/slic3r/GUI/MainFrame.cpp:482 -msgid "Keyboard Shortcuts" -msgstr "Keyboard Shortcuts" - -#: src/slic3r/GUI/MainFrame.cpp:482 -msgid "Show the list of the keyboard shortcuts" -msgstr "Show the list of the keyboard shortcuts" - -#: src/slic3r/GUI/MainFrame.cpp:490 -msgid "&File" -msgstr "&File" - -#: src/slic3r/GUI/MainFrame.cpp:491 -msgid "&Edit" -msgstr "&Edit" - -#: src/slic3r/GUI/MainFrame.cpp:492 -msgid "&Window" -msgstr "&Window" - -#: src/slic3r/GUI/MainFrame.cpp:493 -msgid "&View" -msgstr "&View" - -#: src/slic3r/GUI/MainFrame.cpp:496 -msgid "&Help" -msgstr "&Help" - -#: src/slic3r/GUI/MainFrame.cpp:524 -msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" - -#: src/slic3r/GUI/MainFrame.cpp:538 -msgid "No previously sliced file." -msgstr "No previously sliced file." - -#: src/slic3r/GUI/MainFrame.cpp:539 src/slic3r/GUI/PrintHostDialogs.cpp:219 -msgid "Error" -msgstr "Error" - -#: src/slic3r/GUI/MainFrame.cpp:544 -msgid "Previously sliced file (" -msgstr "Previously sliced file (" - -#: src/slic3r/GUI/MainFrame.cpp:544 -msgid ") not found." -msgstr ") not found." - -#: src/slic3r/GUI/MainFrame.cpp:545 -msgid "File Not Found" -msgstr "File Not Found" - -#: src/slic3r/GUI/MainFrame.cpp:580 src/slic3r/GUI/Tab.cpp:3152 -msgid "Save " -msgstr "Save " - -#: src/slic3r/GUI/MainFrame.cpp:580 -msgid "SVG" -msgstr "SVG" - -#: src/slic3r/GUI/MainFrame.cpp:580 -msgid "G-code" -msgstr "G-code" - -#: src/slic3r/GUI/MainFrame.cpp:580 -msgid " file as:" -msgstr " file as:" - -#: src/slic3r/GUI/MainFrame.cpp:595 -msgid "Save zip file as:" -msgstr "Save zip file as:" - -#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:2352 -#: src/slic3r/GUI/Plater.cpp:3467 src/slic3r/GUI/Tab.cpp:1110 -#: src/slic3r/GUI/Tab.cpp:3348 -msgid "Slicing" -msgstr "Slicing" - -#: src/slic3r/GUI/MainFrame.cpp:607 -msgid "Processing " -msgstr "Processing " - -#: src/slic3r/GUI/MainFrame.cpp:630 -msgid " was successfully sliced." -msgstr " was successfully sliced." - -#: src/slic3r/GUI/MainFrame.cpp:632 -msgid "Slicing Done!" -msgstr "Slicing Done!" - -#: src/slic3r/GUI/MainFrame.cpp:647 -msgid "Select the STL file to repair:" -msgstr "Select the STL file to repair:" - -#: src/slic3r/GUI/MainFrame.cpp:661 -msgid "Save OBJ file (less prone to coordinate errors than STL) as:" -msgstr "Save OBJ file (less prone to coordinate errors than STL) as:" - -#: src/slic3r/GUI/MainFrame.cpp:676 -msgid "Your file was repaired." -msgstr "Your file was repaired." - -#: src/slic3r/GUI/MainFrame.cpp:676 src/libslic3r/PrintConfig.cpp:3051 -msgid "Repair" -msgstr "Repair" - -#: src/slic3r/GUI/MainFrame.cpp:690 -msgid "Save configuration as:" -msgstr "Save configuration as:" - -#: src/slic3r/GUI/MainFrame.cpp:710 src/slic3r/GUI/MainFrame.cpp:774 -msgid "Select configuration to load:" -msgstr "Select configuration to load:" - -#: src/slic3r/GUI/MainFrame.cpp:747 -msgid "Save presets bundle as:" -msgstr "Save presets bundle as:" - -#: src/slic3r/GUI/MainFrame.cpp:798 -#, c-format -msgid "%d presets successfully imported." -msgstr "%d presets successfully imported." - -#: src/slic3r/GUI/MsgDialog.cpp:71 -msgid "Slic3r error" -msgstr "Slic3r error" - -#: src/slic3r/GUI/MsgDialog.cpp:71 -msgid "Slic3r has encountered an error" -msgstr "Slic3r has encountered an error" - -#: src/slic3r/GUI/Plater.cpp:137 -msgid "Volume" -msgstr "Volume" - -#: src/slic3r/GUI/Plater.cpp:138 -msgid "Facets" -msgstr "Facets" - -#: src/slic3r/GUI/Plater.cpp:139 -msgid "Materials" -msgstr "Materials" - -#: src/slic3r/GUI/Plater.cpp:142 -msgid "Manifold" -msgstr "Manifold" - -#: src/slic3r/GUI/Plater.cpp:188 -msgid "Sliced Info" -msgstr "Sliced Info" - -#: src/slic3r/GUI/Plater.cpp:207 src/slic3r/GUI/Plater.cpp:998 -msgid "Used Filament (m)" -msgstr "Used Filament (m)" - -#: src/slic3r/GUI/Plater.cpp:208 -msgid "Used Filament (mm³)" -msgstr "Used Filament (mm³)" - -#: src/slic3r/GUI/Plater.cpp:209 -msgid "Used Filament (g)" -msgstr "Used Filament (g)" - -#: src/slic3r/GUI/Plater.cpp:210 -msgid "Used Material (unit)" -msgstr "Used Material (unit)" - -#: src/slic3r/GUI/Plater.cpp:211 src/slic3r/GUI/Plater.cpp:1013 -#: src/libslic3r/PrintConfig.cpp:716 -msgid "Cost" -msgstr "Cost" - -#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:985 -#: src/slic3r/GUI/Plater.cpp:1027 -msgid "Estimated printing time" -msgstr "Estimated printing time" - -#: src/slic3r/GUI/Plater.cpp:213 -msgid "Number of tool changes" -msgstr "Number of tool changes" - -#: src/slic3r/GUI/Plater.cpp:290 -msgid "Click to edit preset" -msgstr "Click to edit preset" - -#: src/slic3r/GUI/Plater.cpp:413 -msgid "Select what kind of support do you need" -msgstr "Select what kind of support do you need" - -#: src/slic3r/GUI/Plater.cpp:415 src/libslic3r/PrintConfig.cpp:1814 -#: src/libslic3r/PrintConfig.cpp:2419 -msgid "Support on build plate only" -msgstr "Support on build plate only" - -#: src/slic3r/GUI/Plater.cpp:416 -msgid "Everywhere" -msgstr "Everywhere" - -#: src/slic3r/GUI/Plater.cpp:438 src/slic3r/GUI/Tab.cpp:1007 -msgid "Brim" -msgstr "Brim" - -#: src/slic3r/GUI/Plater.cpp:440 -msgid "" -"This flag enables the brim that will be printed around each object on the " -"first layer." -msgstr "" -"This flag enables the brim that will be printed around each object on the " -"first layer." - -#: src/slic3r/GUI/Plater.cpp:448 -msgid "Purging volumes" -msgstr "Purging volumes" - -#: src/slic3r/GUI/Plater.cpp:673 -msgid "Print settings" -msgstr "Print settings" - -#: src/slic3r/GUI/Plater.cpp:674 src/slic3r/GUI/Tab.cpp:1421 -#: src/slic3r/GUI/Tab.cpp:1422 -msgid "Filament" -msgstr "Filament" - -#: src/slic3r/GUI/Plater.cpp:675 src/slic3r/GUI/Preset.cpp:1252 -msgid "SLA print" -msgstr "SLA print" - -#: src/slic3r/GUI/Plater.cpp:676 src/slic3r/GUI/Preset.cpp:1253 -msgid "SLA material" -msgstr "SLA material" - -#: src/slic3r/GUI/Plater.cpp:677 -msgid "Printer" -msgstr "Printer" - -#: src/slic3r/GUI/Plater.cpp:707 src/slic3r/GUI/Plater.cpp:3674 -msgid "Send to printer" -msgstr "Send to printer" - -#: src/slic3r/GUI/Plater.cpp:727 src/slic3r/GUI/Plater.cpp:2352 -#: src/slic3r/GUI/Plater.cpp:3470 -msgid "Slice now" -msgstr "Slice now" - -#: src/slic3r/GUI/Plater.cpp:860 -msgid "Hold Shift to Slice & Export G-code" -msgstr "Hold Shift to Slice & Export G-code" - -#: src/slic3r/GUI/Plater.cpp:931 -#, c-format -msgid "%d (%d shells)" -msgstr "%d (%d shells)" - -#: src/slic3r/GUI/Plater.cpp:936 -#, c-format -msgid "Auto-repaired (%d errors)" -msgstr "Auto-repaired (%d errors)" - -#: src/slic3r/GUI/Plater.cpp:939 -#, c-format -msgid "" -"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " -"facets reversed, %d backwards edges" -msgstr "" -"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " -"facets reversed, %d backwards edges" - -#: src/slic3r/GUI/Plater.cpp:949 -msgid "Yes" -msgstr "Yes" - -#: src/slic3r/GUI/Plater.cpp:972 -msgid "Used Material (ml)" -msgstr "Used Material (ml)" - -#: src/slic3r/GUI/Plater.cpp:975 -msgid "object(s)" -msgstr "object(s)" - -#: src/slic3r/GUI/Plater.cpp:975 -msgid "supports and pad" -msgstr "supports and pad" - -#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015 -msgid "objects" -msgstr "objects" - -#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015 -msgid "wipe tower" -msgstr "wipe tower" - -#: src/slic3r/GUI/Plater.cpp:1030 -msgid "normal mode" -msgstr "normal mode" - -#: src/slic3r/GUI/Plater.cpp:1034 -msgid "silent mode" -msgstr "silent mode" - -#: src/slic3r/GUI/Plater.cpp:1544 -msgid "Loading" -msgstr "Loading" - -#: src/slic3r/GUI/Plater.cpp:1554 -#, c-format -msgid "Processing input file %s\n" -msgstr "Processing input file %s\n" - -#: src/slic3r/GUI/Plater.cpp:1612 -msgid "" -"This file contains several objects positioned at multiple heights. Instead " -"of considering them as multiple objects, should I consider\n" -"this file as a single object having multiple parts?\n" -msgstr "" -"This file contains several objects positioned at multiple heights. Instead " -"of considering them as multiple objects, should I consider\n" -"this file as a single object having multiple parts?\n" - -#: src/slic3r/GUI/Plater.cpp:1615 src/slic3r/GUI/Plater.cpp:1707 -msgid "Multi-part object detected" -msgstr "Multi-part object detected" - -#: src/slic3r/GUI/Plater.cpp:1650 -msgid "" -"This file cannot be loaded in simple mode. Do you want to switch to expert " -"mode?\n" -msgstr "" -"This file cannot be loaded in simple mode. Do you want to switch to expert " -"mode?\n" - -#: src/slic3r/GUI/Plater.cpp:1651 -msgid "Detected advanced data" -msgstr "Detected advanced data" - -#: src/slic3r/GUI/Plater.cpp:1684 -#, c-format -msgid "" -"You can't to add the object(s) from %s because of one or some of them " -"is(are) multi-part" -msgstr "" -"You can't to add the object(s) from %s because of one or some of them " -"is(are) multi-part" - -#: src/slic3r/GUI/Plater.cpp:1704 -msgid "" -"Multiple objects were loaded for a multi-material printer.\n" -"Instead of considering them as multiple objects, should I consider\n" -"these files to represent a single object having multiple parts?\n" -msgstr "" -"Multiple objects were loaded for a multi-material printer.\n" -"Instead of considering them as multiple objects, should I consider\n" -"these files to represent a single object having multiple parts?\n" - -#: src/slic3r/GUI/Plater.cpp:1720 -msgid "Loaded" -msgstr "Loaded" - -#: src/slic3r/GUI/Plater.cpp:1812 -msgid "" -"Your object appears to be too large, so it was automatically scaled down to " -"fit your print bed." -msgstr "" -"Your object appears to be too large, so it was automatically scaled down to " -"fit your print bed." - -#: src/slic3r/GUI/Plater.cpp:1813 -msgid "Object too large?" -msgstr "Object too large?" - -#: src/slic3r/GUI/Plater.cpp:1863 -msgid "Export STL file:" -msgstr "Export STL file:" - -#: src/slic3r/GUI/Plater.cpp:1870 -msgid "Export AMF file:" -msgstr "Export AMF file:" - -#: src/slic3r/GUI/Plater.cpp:1876 -msgid "Save file as:" -msgstr "Save file as:" - -#: src/slic3r/GUI/Plater.cpp:2042 -msgid "Arranging canceled" -msgstr "Arranging canceled" - -#: src/slic3r/GUI/Plater.cpp:2045 -msgid "Arranging" -msgstr "Arranging" - -#: src/slic3r/GUI/Plater.cpp:2079 -msgid "Could not arrange model objects! Some geometries may be invalid." -msgstr "Could not arrange model objects! Some geometries may be invalid." - -#: src/slic3r/GUI/Plater.cpp:2083 -msgid "Arranging done." -msgstr "Arranging done." - -#: src/slic3r/GUI/Plater.cpp:2124 -msgid "Orientation search canceled" -msgstr "Orientation search canceled" - -#: src/slic3r/GUI/Plater.cpp:2129 -msgid "Searching for optimal orientation" -msgstr "Searching for optimal orientation" - -#: src/slic3r/GUI/Plater.cpp:2190 -msgid "Orientation found." -msgstr "Orientation found." - -#: src/slic3r/GUI/Plater.cpp:2211 -msgid "" -"The selected object can't be split because it contains more than one volume/" -"material." -msgstr "" -"The selected object can't be split because it contains more than one volume/" -"material." - -#: src/slic3r/GUI/Plater.cpp:2337 -msgid "Invalid data" -msgstr "Invalid data" - -#: src/slic3r/GUI/Plater.cpp:2346 -msgid "Ready to slice" -msgstr "Ready to slice" - -#: src/slic3r/GUI/Plater.cpp:2379 src/slic3r/GUI/PrintHostDialogs.cpp:220 -msgid "Cancelling" -msgstr "Cancelling" - -#: src/slic3r/GUI/Plater.cpp:2396 -msgid "Another export job is currently running." -msgstr "Another export job is currently running." - -#: src/slic3r/GUI/Plater.cpp:2656 -msgid "Export failed" -msgstr "Export failed" - -#: src/slic3r/GUI/Plater.cpp:2661 src/slic3r/GUI/PrintHostDialogs.cpp:221 -msgid "Cancelled" -msgstr "Cancelled" - -#: src/slic3r/GUI/Plater.cpp:2747 src/slic3r/GUI/Plater.cpp:2759 -#: src/slic3r/GUI/Plater.cpp:2831 -msgid "Increase copies" -msgstr "Increase copies" - -#: src/slic3r/GUI/Plater.cpp:2825 src/slic3r/GUI/Plater.cpp:2843 -msgid "Remove the selected object" -msgstr "Remove the selected object" - -#: src/slic3r/GUI/Plater.cpp:2831 -msgid "Place one more copy of the selected object" -msgstr "Place one more copy of the selected object" - -#: src/slic3r/GUI/Plater.cpp:2833 -msgid "Decrease copies" -msgstr "Decrease copies" - -#: src/slic3r/GUI/Plater.cpp:2833 -msgid "Remove one copy of the selected object" -msgstr "Remove one copy of the selected object" - -#: src/slic3r/GUI/Plater.cpp:2835 -msgid "Set number of copies" -msgstr "Set number of copies" - -#: src/slic3r/GUI/Plater.cpp:2835 -msgid "Change the number of copies of the selected object" -msgstr "Change the number of copies of the selected object" - -#: src/slic3r/GUI/Plater.cpp:2858 -msgid "Reload from Disk" -msgstr "Reload from Disk" - -#: src/slic3r/GUI/Plater.cpp:2858 -msgid "Reload the selected file from Disk" -msgstr "Reload the selected file from Disk" - -#: src/slic3r/GUI/Plater.cpp:2861 -msgid "Export the selected object as STL file" -msgstr "Export the selected object as STL file" - -#: src/slic3r/GUI/Plater.cpp:2873 -msgid "Along X axis" -msgstr "Along X axis" - -#: src/slic3r/GUI/Plater.cpp:2873 -msgid "Mirror the selected object along the X axis" -msgstr "Mirror the selected object along the X axis" - -#: src/slic3r/GUI/Plater.cpp:2875 -msgid "Along Y axis" -msgstr "Along Y axis" - -#: src/slic3r/GUI/Plater.cpp:2875 -msgid "Mirror the selected object along the Y axis" -msgstr "Mirror the selected object along the Y axis" - -#: src/slic3r/GUI/Plater.cpp:2877 -msgid "Along Z axis" -msgstr "Along Z axis" - -#: src/slic3r/GUI/Plater.cpp:2877 -msgid "Mirror the selected object along the Z axis" -msgstr "Mirror the selected object along the Z axis" - -#: src/slic3r/GUI/Plater.cpp:2880 -msgid "Mirror" -msgstr "Mirror" - -#: src/slic3r/GUI/Plater.cpp:2880 -msgid "Mirror the selected object" -msgstr "Mirror the selected object" - -#: src/slic3r/GUI/Plater.cpp:2898 -msgid "To objects" -msgstr "To objects" - -#: src/slic3r/GUI/Plater.cpp:2898 src/slic3r/GUI/Plater.cpp:2920 -msgid "Split the selected object into individual objects" -msgstr "Split the selected object into individual objects" - -#: src/slic3r/GUI/Plater.cpp:2900 -msgid "To parts" -msgstr "To parts" - -#: src/slic3r/GUI/Plater.cpp:2900 src/slic3r/GUI/Plater.cpp:2940 -msgid "Split the selected object into individual sub-parts" -msgstr "Split the selected object into individual sub-parts" - -#: src/slic3r/GUI/Plater.cpp:2903 src/slic3r/GUI/Plater.cpp:2920 -#: src/slic3r/GUI/Plater.cpp:2940 src/libslic3r/PrintConfig.cpp:3075 -msgid "Split" -msgstr "Split" - -#: src/slic3r/GUI/Plater.cpp:2903 -msgid "Split the selected object" -msgstr "Split the selected object" - -#: src/slic3r/GUI/Plater.cpp:2926 -msgid "Optimize orientation" -msgstr "Optimize orientation" - -#: src/slic3r/GUI/Plater.cpp:2926 -msgid "Optimize the rotation of the object for better print results." -msgstr "Optimize the rotation of the object for better print results." - -#: src/slic3r/GUI/Plater.cpp:3342 -msgid "Save G-code file as:" -msgstr "Save G-code file as:" - -#: src/slic3r/GUI/Plater.cpp:3342 -msgid "Save SL1 file as:" -msgstr "Save SL1 file as:" - -#: src/slic3r/GUI/Plater.cpp:3397 -#, c-format -msgid "STL file exported to %s" -msgstr "STL file exported to %s" - -#: src/slic3r/GUI/Plater.cpp:3413 -#, c-format -msgid "AMF file exported to %s" -msgstr "AMF file exported to %s" - -#: src/slic3r/GUI/Plater.cpp:3416 -#, c-format -msgid "Error exporting AMF file %s" -msgstr "Error exporting AMF file %s" - -#: src/slic3r/GUI/Plater.cpp:3442 -#, c-format -msgid "3MF file exported to %s" -msgstr "3MF file exported to %s" - -#: src/slic3r/GUI/Plater.cpp:3445 -#, c-format -msgid "Error exporting 3MF file %s" -msgstr "Error exporting 3MF file %s" - -#: src/slic3r/GUI/Plater.cpp:3673 -msgid "Export" -msgstr "Export" - -#: src/slic3r/GUI/Plater.cpp:3674 -msgid "Send G-code" -msgstr "Send G-code" - -#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1762 -#: src/slic3r/GUI/Tab.cpp:1963 -msgid "General" -msgstr "General" - -#: src/slic3r/GUI/Preferences.cpp:34 -msgid "Remember output directory" -msgstr "Remember output directory" - -#: src/slic3r/GUI/Preferences.cpp:36 -msgid "" -"If this is enabled, Slic3r will prompt the last output directory instead of " -"the one containing the input files." -msgstr "" -"If this is enabled, Slic3r will prompt the last output directory instead of " -"the one containing the input files." - -#: src/slic3r/GUI/Preferences.cpp:42 -msgid "Auto-center parts" -msgstr "Auto-center parts" - -#: src/slic3r/GUI/Preferences.cpp:44 -msgid "" -"If this is enabled, Slic3r will auto-center objects around the print bed " -"center." -msgstr "" -"If this is enabled, Slic3r will auto-center objects around the print bed " -"center." - -#: src/slic3r/GUI/Preferences.cpp:50 -msgid "Background processing" -msgstr "Background processing" - -#: src/slic3r/GUI/Preferences.cpp:52 -msgid "" -"If this is enabled, Slic3r will pre-process objects as soon as they're " -"loaded in order to save time when exporting G-code." -msgstr "" -"If this is enabled, Slic3r will pre-process objects as soon as they're " -"loaded in order to save time when exporting G-code." - -#: src/slic3r/GUI/Preferences.cpp:74 -msgid "Suppress \" - default - \" presets" -msgstr "Suppress \" - default - \" presets" - -#: src/slic3r/GUI/Preferences.cpp:76 -msgid "" -"Suppress \" - default - \" presets in the Print / Filament / Printer " -"selections once there are any other valid presets available." -msgstr "" -"Suppress \" - default - \" presets in the Print / Filament / Printer " -"selections once there are any other valid presets available." - -#: src/slic3r/GUI/Preferences.cpp:82 -msgid "Show incompatible print and filament presets" -msgstr "Show incompatible print and filament presets" - -#: src/slic3r/GUI/Preferences.cpp:84 -msgid "" -"When checked, the print and filament presets are shown in the preset editor " -"even if they are marked as incompatible with the active printer" -msgstr "" -"When checked, the print and filament presets are shown in the preset editor " -"even if they are marked as incompatible with the active printer" - -#: src/slic3r/GUI/Preferences.cpp:91 -msgid "Use legacy OpenGL 1.1 rendering" -msgstr "Use legacy OpenGL 1.1 rendering" - -#: src/slic3r/GUI/Preferences.cpp:93 -msgid "" -"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may " -"try to check this checkbox. This will disable the layer height editing and " -"anti aliasing, so it is likely better to upgrade your graphics driver." -msgstr "" -"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may " -"try to check this checkbox. This will disable the layer height editing and " -"anti aliasing, so it is likely better to upgrade your graphics driver." - -#: src/slic3r/GUI/Preferences.cpp:101 -msgid "Use Retina resolution for the 3D scene" -msgstr "Use Retina resolution for the 3D scene" - -#: src/slic3r/GUI/Preferences.cpp:103 -msgid "" -"If enabled, the 3D scene will be rendered in Retina resolution. If you are " -"experiencing 3D performance problems, disabling this option may help." -msgstr "" -"If enabled, the 3D scene will be rendered in Retina resolution. If you are " -"experiencing 3D performance problems, disabling this option may help." - -#: src/slic3r/GUI/Preferences.cpp:126 -msgid "You need to restart Slic3r to make the changes effective." -msgstr "You need to restart Slic3r to make the changes effective." - -#: src/slic3r/GUI/Preset.cpp:207 -msgid "modified" -msgstr "modified" - -#: src/slic3r/GUI/Preset.cpp:918 src/slic3r/GUI/Preset.cpp:958 -#: src/slic3r/GUI/Preset.cpp:1011 src/slic3r/GUI/Preset.cpp:1043 -#: src/slic3r/GUI/PresetBundle.cpp:1484 src/slic3r/GUI/PresetBundle.cpp:1537 -msgid "System presets" -msgstr "System presets" - -#: src/slic3r/GUI/Preset.cpp:962 src/slic3r/GUI/Preset.cpp:1047 -#: src/slic3r/GUI/PresetBundle.cpp:1542 -msgid "User presets" -msgstr "User presets" - -#: src/slic3r/GUI/Preset.cpp:991 src/slic3r/GUI/Tab.cpp:247 -msgid "Add a new printer" -msgstr "Add a new printer" - -#: src/slic3r/GUI/Preset.cpp:1251 -msgid "filament" -msgstr "filament" - -#: src/slic3r/GUI/PresetHints.cpp:28 -#, c-format -msgid "" -"If estimated layer time is below ~%ds, fan will run at %d%% and print speed " -"will be reduced so that no less than %ds are spent on that layer (however, " -"speed will never be reduced below %dmm/s)." -msgstr "" -"If estimated layer time is below ~%ds, fan will run at %d%% and print speed " -"will be reduced so that no less than %ds are spent on that layer (however, " -"speed will never be reduced below %dmm/s)." - -#: src/slic3r/GUI/PresetHints.cpp:32 -#, c-format -msgid "" -"\n" -"If estimated layer time is greater, but still below ~%ds, fan will run at a " -"proportionally decreasing speed between %d%% and %d%%." -msgstr "" -"\n" -"If estimated layer time is greater, but still below ~%ds, fan will run at a " -"proportionally decreasing speed between %d%% and %d%%." - -#: src/slic3r/GUI/PresetHints.cpp:36 -msgid "" -"\n" -"During the other layers, fan " -msgstr "" -"\n" -"During the other layers, fan " - -#: src/slic3r/GUI/PresetHints.cpp:38 -msgid "Fan " -msgstr "Fan " - -#: src/slic3r/GUI/PresetHints.cpp:43 -#, c-format -msgid "will always run at %d%% " -msgstr "will always run at %d%% " - -#: src/slic3r/GUI/PresetHints.cpp:46 -#, c-format -msgid "except for the first %d layers" -msgstr "except for the first %d layers" - -#: src/slic3r/GUI/PresetHints.cpp:50 -msgid "except for the first layer" -msgstr "except for the first layer" - -#: src/slic3r/GUI/PresetHints.cpp:52 -msgid "will be turned off." -msgstr "will be turned off." - -#: src/slic3r/GUI/PresetHints.cpp:153 -msgid "external perimeters" -msgstr "external perimeters" - -#: src/slic3r/GUI/PresetHints.cpp:162 -msgid "perimeters" -msgstr "perimeters" - -#: src/slic3r/GUI/PresetHints.cpp:171 -msgid "infill" -msgstr "infill" - -#: src/slic3r/GUI/PresetHints.cpp:181 -msgid "solid infill" -msgstr "solid infill" - -#: src/slic3r/GUI/PresetHints.cpp:189 -msgid "top solid infill" -msgstr "top solid infill" - -#: src/slic3r/GUI/PresetHints.cpp:200 -msgid "support" -msgstr "support" - -#: src/slic3r/GUI/PresetHints.cpp:210 -msgid "support interface" -msgstr "support interface" - -#: src/slic3r/GUI/PresetHints.cpp:216 -msgid "First layer volumetric" -msgstr "First layer volumetric" - -#: src/slic3r/GUI/PresetHints.cpp:216 -msgid "Bridging volumetric" -msgstr "Bridging volumetric" - -#: src/slic3r/GUI/PresetHints.cpp:216 -msgid "Volumetric" -msgstr "Volumetric" - -#: src/slic3r/GUI/PresetHints.cpp:217 -msgid " flow rate is maximized " -msgstr " flow rate is maximized " - -#: src/slic3r/GUI/PresetHints.cpp:220 -msgid "by the print profile maximum" -msgstr "by the print profile maximum" - -#: src/slic3r/GUI/PresetHints.cpp:221 -msgid "when printing " -msgstr "when printing " - -#: src/slic3r/GUI/PresetHints.cpp:222 -msgid " with a volumetric rate " -msgstr " with a volumetric rate " - -#: src/slic3r/GUI/PresetHints.cpp:226 -#, c-format -msgid "%3.2f mm³/s" -msgstr "%3.2f mm³/s" - -#: src/slic3r/GUI/PresetHints.cpp:228 -#, c-format -msgid " at filament speed %3.2f mm/s." -msgstr " at filament speed %3.2f mm/s." - -#: src/slic3r/GUI/PresetHints.cpp:247 -msgid "" -"Recommended object thin wall thickness: Not available due to invalid layer " -"height." -msgstr "" -"Recommended object thin wall thickness: Not available due to invalid layer " -"height." - -#: src/slic3r/GUI/PresetHints.cpp:264 -#, c-format -msgid "Recommended object thin wall thickness for layer height %.2f and " -msgstr "Recommended object thin wall thickness for layer height %.2f and " - -#: src/slic3r/GUI/PresetHints.cpp:271 -#, c-format -msgid "%d lines: %.2lf mm" -msgstr "%d lines: %.2lf mm" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:32 -msgid "Send G-Code to printer host" -msgstr "Send G-Code to printer host" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:32 -msgid "Upload to Printer Host with the following filename:" -msgstr "Upload to Printer Host with the following filename:" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:34 -msgid "Start printing after upload" -msgstr "Start printing after upload" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:41 -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Use forward slashes ( / ) as a directory separator if needed." - -#: src/slic3r/GUI/PrintHostDialogs.cpp:157 -msgid "Cancel selected" -msgstr "Cancel selected" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:159 -msgid "Show error message" -msgstr "Show error message" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:198 -#: src/slic3r/GUI/PrintHostDialogs.cpp:217 -msgid "Enqueued" -msgstr "Enqueued" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:218 -msgid "Uploading" -msgstr "Uploading" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:222 -msgid "Completed" -msgstr "Completed" - -#: src/slic3r/GUI/PrintHostDialogs.cpp:260 -msgid "Error uploading to print host:" -msgstr "Error uploading to print host:" - -#: src/slic3r/GUI/RammingChart.cpp:23 -msgid "NO RAMMING AT ALL" -msgstr "NO RAMMING AT ALL" - -#: src/slic3r/GUI/RammingChart.cpp:76 -msgid "Time" -msgstr "Time" - -#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81 -#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:611 -#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:670 -#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2250 -#: src/libslic3r/PrintConfig.cpp:2308 src/libslic3r/PrintConfig.cpp:2315 -msgid "s" -msgstr "s" - -#: src/slic3r/GUI/RammingChart.cpp:81 -msgid "Volumetric speed" -msgstr "Volumetric speed" - -#: src/slic3r/GUI/SysInfoDialog.cpp:44 -msgid "Slic3r Prusa Edition - System Information" -msgstr "Slic3r Prusa Edition - System Information" - -#: src/slic3r/GUI/Tab.cpp:50 src/libslic3r/PrintConfig.cpp:228 -msgid "Compatible printers" -msgstr "Compatible printers" - -#: src/slic3r/GUI/Tab.cpp:51 -msgid "Select the printers this profile is compatible with." -msgstr "Select the printers this profile is compatible with." - -#: src/slic3r/GUI/Tab.cpp:56 src/libslic3r/PrintConfig.cpp:243 -msgid "Compatible print profiles" -msgstr "Compatible print profiles" - -#: src/slic3r/GUI/Tab.cpp:57 -msgid "Select the print profiles this profile is compatible with." -msgstr "Select the print profiles this profile is compatible with." - -#: src/slic3r/GUI/Tab.cpp:132 -msgid "Save current " -msgstr "Save current " - -#: src/slic3r/GUI/Tab.cpp:133 -msgid "Delete this preset" -msgstr "Delete this preset" - -#: src/slic3r/GUI/Tab.cpp:145 -msgid "" -"Hover the cursor over buttons to find more information \n" -"or click this button." -msgstr "" -"Hover the cursor over buttons to find more information \n" -"or click this button." - -#: src/slic3r/GUI/Tab.cpp:858 -msgid "It's a default preset." -msgstr "It's a default preset." - -#: src/slic3r/GUI/Tab.cpp:859 -msgid "It's a system preset." -msgstr "It's a system preset." - -#: src/slic3r/GUI/Tab.cpp:860 -msgid "Current preset is inherited from " -msgstr "Current preset is inherited from " - -#: src/slic3r/GUI/Tab.cpp:865 -msgid "It can't be deleted or modified. " -msgstr "It can't be deleted or modified. " - -#: src/slic3r/GUI/Tab.cpp:866 -msgid "" -"Any modifications should be saved as a new preset inherited from this one. " -msgstr "" -"Any modifications should be saved as a new preset inherited from this one. " - -#: src/slic3r/GUI/Tab.cpp:867 -msgid "To do that please specify a new name for the preset." -msgstr "To do that please specify a new name for the preset." - -#: src/slic3r/GUI/Tab.cpp:871 -msgid "Additional information:" -msgstr "Additional information:" - -#: src/slic3r/GUI/Tab.cpp:877 -msgid "printer model" -msgstr "printer model" - -#: src/slic3r/GUI/Tab.cpp:885 -msgid "default print profile" -msgstr "default print profile" - -#: src/slic3r/GUI/Tab.cpp:888 -msgid "default filament profile" -msgstr "default filament profile" - -#: src/slic3r/GUI/Tab.cpp:902 -msgid "default SLA material profile" -msgstr "default SLA material profile" - -#: src/slic3r/GUI/Tab.cpp:906 -msgid "default SLA print profile" -msgstr "default SLA print profile" - -#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:3303 -msgid "Layers and perimeters" -msgstr "Layers and perimeters" - -#: src/slic3r/GUI/Tab.cpp:949 src/libslic3r/PrintConfig.cpp:55 -msgid "Layer height" -msgstr "Layer height" - -#: src/slic3r/GUI/Tab.cpp:953 -msgid "Vertical shells" -msgstr "Vertical shells" - -#: src/slic3r/GUI/Tab.cpp:964 -msgid "Horizontal shells" -msgstr "Horizontal shells" - -#: src/slic3r/GUI/Tab.cpp:965 src/libslic3r/PrintConfig.cpp:1709 -msgid "Solid layers" -msgstr "Solid layers" - -#: src/slic3r/GUI/Tab.cpp:970 -msgid "Quality (slower slicing)" -msgstr "Quality (slower slicing)" - -#: src/slic3r/GUI/Tab.cpp:988 -msgid "Reducing printing time" -msgstr "Reducing printing time" - -#: src/slic3r/GUI/Tab.cpp:1000 -msgid "Skirt and brim" -msgstr "Skirt and brim" - -#: src/slic3r/GUI/Tab.cpp:1017 -msgid "Raft" -msgstr "Raft" - -#: src/slic3r/GUI/Tab.cpp:1021 -msgid "Options for support material and raft" -msgstr "Options for support material and raft" - -#: src/slic3r/GUI/Tab.cpp:1036 -msgid "Speed for print moves" -msgstr "Speed for print moves" - -#: src/slic3r/GUI/Tab.cpp:1048 -msgid "Speed for non-print moves" -msgstr "Speed for non-print moves" - -#: src/slic3r/GUI/Tab.cpp:1051 -msgid "Modifiers" -msgstr "Modifiers" - -#: src/slic3r/GUI/Tab.cpp:1054 -msgid "Acceleration control (advanced)" -msgstr "Acceleration control (advanced)" - -#: src/slic3r/GUI/Tab.cpp:1061 -msgid "Autospeed (advanced)" -msgstr "Autospeed (advanced)" - -#: src/slic3r/GUI/Tab.cpp:1069 -msgid "Multiple Extruders" -msgstr "Multiple Extruders" - -#: src/slic3r/GUI/Tab.cpp:1077 -msgid "Ooze prevention" -msgstr "Ooze prevention" - -#: src/slic3r/GUI/Tab.cpp:1094 -msgid "Extrusion width" -msgstr "Extrusion width" - -#: src/slic3r/GUI/Tab.cpp:1104 -msgid "Overlap" -msgstr "Overlap" - -#: src/slic3r/GUI/Tab.cpp:1107 -msgid "Flow" -msgstr "Flow" - -#: src/slic3r/GUI/Tab.cpp:1116 -msgid "Other" -msgstr "Other" - -#: src/slic3r/GUI/Tab.cpp:1119 src/slic3r/GUI/Tab.cpp:3351 -msgid "Output options" -msgstr "Output options" - -#: src/slic3r/GUI/Tab.cpp:1120 -msgid "Sequential printing" -msgstr "Sequential printing" - -#: src/slic3r/GUI/Tab.cpp:1122 -msgid "Extruder clearance (mm)" -msgstr "Extruder clearance (mm)" - -#: src/slic3r/GUI/Tab.cpp:1131 src/slic3r/GUI/Tab.cpp:3352 -msgid "Output file" -msgstr "Output file" - -#: src/slic3r/GUI/Tab.cpp:1138 src/libslic3r/PrintConfig.cpp:1382 -msgid "Post-processing scripts" -msgstr "Post-processing scripts" - -#: src/slic3r/GUI/Tab.cpp:1144 src/slic3r/GUI/Tab.cpp:1145 -#: src/slic3r/GUI/Tab.cpp:1527 src/slic3r/GUI/Tab.cpp:1528 -#: src/slic3r/GUI/Tab.cpp:1935 src/slic3r/GUI/Tab.cpp:1936 -#: src/slic3r/GUI/Tab.cpp:2027 src/slic3r/GUI/Tab.cpp:2028 -#: src/slic3r/GUI/Tab.cpp:3240 src/slic3r/GUI/Tab.cpp:3241 -msgid "Notes" -msgstr "Notes" - -#: src/slic3r/GUI/Tab.cpp:1151 src/slic3r/GUI/Tab.cpp:1535 -#: src/slic3r/GUI/Tab.cpp:1942 src/slic3r/GUI/Tab.cpp:2034 -#: src/slic3r/GUI/Tab.cpp:3248 src/slic3r/GUI/Tab.cpp:3357 -msgid "Dependencies" -msgstr "Dependencies" - -#: src/slic3r/GUI/Tab.cpp:1152 src/slic3r/GUI/Tab.cpp:1536 -#: src/slic3r/GUI/Tab.cpp:1943 src/slic3r/GUI/Tab.cpp:2035 -#: src/slic3r/GUI/Tab.cpp:3249 src/slic3r/GUI/Tab.cpp:3358 -msgid "Profile dependencies" -msgstr "Profile dependencies" - -#: src/slic3r/GUI/Tab.cpp:1198 -#, no-c-format -msgid "" -"The Spiral Vase mode requires:\n" -"- one perimeter\n" -"- no top solid layers\n" -"- 0% fill density\n" -"- no support material\n" -"- no ensure_vertical_shell_thickness\n" -"\n" -"Shall I adjust those settings in order to enable Spiral Vase?" -msgstr "" -"The Spiral Vase mode requires:\n" -"- one perimeter\n" -"- no top solid layers\n" -"- 0% fill density\n" -"- no support material\n" -"- no ensure_vertical_shell_thickness\n" -"\n" -"Shall I adjust those settings in order to enable Spiral Vase?" - -#: src/slic3r/GUI/Tab.cpp:1205 -msgid "Spiral Vase" -msgstr "Spiral Vase" - -#: src/slic3r/GUI/Tab.cpp:1228 -msgid "" -"The Wipe Tower currently supports the non-soluble supports only\n" -"if they are printed with the current extruder without triggering a tool " -"change.\n" -"(both support_material_extruder and support_material_interface_extruder need " -"to be set to 0).\n" -"\n" -"Shall I adjust those settings in order to enable the Wipe Tower?" -msgstr "" -"The Wipe Tower currently supports the non-soluble supports only\n" -"if they are printed with the current extruder without triggering a tool " -"change.\n" -"(both support_material_extruder and support_material_interface_extruder need " -"to be set to 0).\n" -"\n" -"Shall I adjust those settings in order to enable the Wipe Tower?" - -#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:1249 -msgid "Wipe Tower" -msgstr "Wipe Tower" - -#: src/slic3r/GUI/Tab.cpp:1246 -msgid "" -"For the Wipe Tower to work with the soluble supports, the support layers\n" -"need to be synchronized with the object layers.\n" -"\n" -"Shall I synchronize support layers in order to enable the Wipe Tower?" -msgstr "" -"For the Wipe Tower to work with the soluble supports, the support layers\n" -"need to be synchronized with the object layers.\n" -"\n" -"Shall I synchronize support layers in order to enable the Wipe Tower?" - -#: src/slic3r/GUI/Tab.cpp:1264 -msgid "" -"Supports work better, if the following feature is enabled:\n" -"- Detect bridging perimeters\n" -"\n" -"Shall I adjust those settings for supports?" -msgstr "" -"Supports work better, if the following feature is enabled:\n" -"- Detect bridging perimeters\n" -"\n" -"Shall I adjust those settings for supports?" - -#: src/slic3r/GUI/Tab.cpp:1267 -msgid "Support Generator" -msgstr "Support Generator" - -#: src/slic3r/GUI/Tab.cpp:1309 -msgid "The " -msgstr "The " - -#: src/slic3r/GUI/Tab.cpp:1309 -#, no-c-format -msgid "" -" infill pattern is not supposed to work at 100% density.\n" -"\n" -"Shall I switch to rectilinear fill pattern?" -msgstr "" -" infill pattern is not supposed to work at 100% density.\n" -"\n" -"Shall I switch to rectilinear fill pattern?" - -#: src/slic3r/GUI/Tab.cpp:1429 -msgid "Temperature " -msgstr "Temperature " - -#: src/slic3r/GUI/Tab.cpp:1435 -msgid "Bed" -msgstr "Bed" - -#: src/slic3r/GUI/Tab.cpp:1440 -msgid "Cooling" -msgstr "Cooling" - -#: src/slic3r/GUI/Tab.cpp:1441 src/libslic3r/PrintConfig.cpp:1285 -#: src/libslic3r/PrintConfig.cpp:2097 -msgid "Enable" -msgstr "Enable" - -#: src/slic3r/GUI/Tab.cpp:1452 -msgid "Fan settings" -msgstr "Fan settings" - -#: src/slic3r/GUI/Tab.cpp:1453 -msgid "Fan speed" -msgstr "Fan speed" - -#: src/slic3r/GUI/Tab.cpp:1461 -msgid "Cooling thresholds" -msgstr "Cooling thresholds" - -#: src/slic3r/GUI/Tab.cpp:1467 -msgid "Filament properties" -msgstr "Filament properties" - -#: src/slic3r/GUI/Tab.cpp:1471 -msgid "Print speed override" -msgstr "Print speed override" - -#: src/slic3r/GUI/Tab.cpp:1481 -msgid "Toolchange parameters with single extruder MM printers" -msgstr "Toolchange parameters with single extruder MM printers" - -#: src/slic3r/GUI/Tab.cpp:1496 -msgid "Ramming settings" -msgstr "Ramming settings" - -#: src/slic3r/GUI/Tab.cpp:1514 src/slic3r/GUI/Tab.cpp:1898 -msgid "Custom G-code" -msgstr "Custom G-code" - -#: src/slic3r/GUI/Tab.cpp:1515 src/slic3r/GUI/Tab.cpp:1899 -#: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:1750 -msgid "Start G-code" -msgstr "Start G-code" - -#: src/slic3r/GUI/Tab.cpp:1521 src/slic3r/GUI/Tab.cpp:1905 -#: src/libslic3r/PrintConfig.cpp:358 src/libslic3r/PrintConfig.cpp:368 -msgid "End G-code" -msgstr "End G-code" - -#: src/slic3r/GUI/Tab.cpp:1632 src/slic3r/GUI/Tab.cpp:1689 -msgid " Browse " -msgstr " Browse " - -#: src/slic3r/GUI/Tab.cpp:1651 src/slic3r/GUI/Tab.cpp:1838 -msgid "Test" -msgstr "Test" - -#: src/slic3r/GUI/Tab.cpp:1662 -msgid "Could not get a valid Printer Host reference" -msgstr "Could not get a valid Printer Host reference" - -#: src/slic3r/GUI/Tab.cpp:1668 src/slic3r/GUI/Tab.cpp:1851 -msgid "Success!" -msgstr "Success!" - -#: src/slic3r/GUI/Tab.cpp:1683 -msgid "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." -msgstr "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." - -#: src/slic3r/GUI/Tab.cpp:1696 -msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" - -#: src/slic3r/GUI/Tab.cpp:1697 -msgid "Open CA certificate file" -msgstr "Open CA certificate file" - -#: src/slic3r/GUI/Tab.cpp:1725 -msgid "" -"HTTPS CA File:\n" -"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate " -"Store or Keychain.\n" -"\tTo use a custom CA file, please import your CA file into Certificate " -"Store / Keychain." -msgstr "" -"HTTPS CA File:\n" -"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate " -"Store or Keychain.\n" -"\tTo use a custom CA file, please import your CA file into Certificate " -"Store / Keychain." - -#: src/slic3r/GUI/Tab.cpp:1763 src/slic3r/GUI/Tab.cpp:1964 -msgid "Size and coordinates" -msgstr "Size and coordinates" - -#: src/slic3r/GUI/Tab.cpp:1767 src/slic3r/GUI/Tab.cpp:1968 -#: src/slic3r/GUI/Tab.cpp:2911 -msgid " Set " -msgstr " Set " - -#: src/slic3r/GUI/Tab.cpp:1790 -msgid "Capabilities" -msgstr "Capabilities" - -#: src/slic3r/GUI/Tab.cpp:1795 -msgid "Number of extruders of the printer." -msgstr "Number of extruders of the printer." - -#: src/slic3r/GUI/Tab.cpp:1823 -msgid "USB/Serial connection" -msgstr "USB/Serial connection" - -#: src/slic3r/GUI/Tab.cpp:1824 src/libslic3r/PrintConfig.cpp:1590 -msgid "Serial port" -msgstr "Serial port" - -#: src/slic3r/GUI/Tab.cpp:1829 -msgid "Rescan serial ports" -msgstr "Rescan serial ports" - -#: src/slic3r/GUI/Tab.cpp:1851 -msgid "Connection to printer works correctly." -msgstr "Connection to printer works correctly." - -#: src/slic3r/GUI/Tab.cpp:1854 -msgid "Connection failed." -msgstr "Connection failed." - -#: src/slic3r/GUI/Tab.cpp:1867 src/slic3r/GUI/Tab.cpp:2022 -msgid "Print Host upload" -msgstr "Print Host upload" - -#: src/slic3r/GUI/Tab.cpp:1911 src/libslic3r/PrintConfig.cpp:128 -msgid "Before layer change G-code" -msgstr "Before layer change G-code" - -#: src/slic3r/GUI/Tab.cpp:1917 src/libslic3r/PrintConfig.cpp:1030 -msgid "After layer change G-code" -msgstr "After layer change G-code" - -#: src/slic3r/GUI/Tab.cpp:1923 src/libslic3r/PrintConfig.cpp:2005 -msgid "Tool change G-code" -msgstr "Tool change G-code" - -#: src/slic3r/GUI/Tab.cpp:1929 -msgid "Between objects G-code (for sequential printing)" -msgstr "Between objects G-code (for sequential printing)" - -#: src/slic3r/GUI/Tab.cpp:1990 -msgid "Display" -msgstr "Display" - -#: src/slic3r/GUI/Tab.cpp:2001 -msgid "Tilt" -msgstr "Tilt" - -#: src/slic3r/GUI/Tab.cpp:2002 -msgid "Tilt time" -msgstr "Tilt time" - -#: src/slic3r/GUI/Tab.cpp:2008 src/slic3r/GUI/Tab.cpp:3223 -msgid "Corrections" -msgstr "Corrections" - -#: src/slic3r/GUI/Tab.cpp:2074 src/slic3r/GUI/Tab.cpp:2136 -#: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1086 -#: src/libslic3r/PrintConfig.cpp:1096 src/libslic3r/PrintConfig.cpp:1109 -#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1131 -#: src/libslic3r/PrintConfig.cpp:1142 -msgid "Machine limits" -msgstr "Machine limits" - -#: src/slic3r/GUI/Tab.cpp:2088 -msgid "Values in this column are for Full Power mode" -msgstr "Values in this column are for Full Power mode" - -#: src/slic3r/GUI/Tab.cpp:2089 -msgid "Full Power" -msgstr "Full Power" - -#: src/slic3r/GUI/Tab.cpp:2094 -msgid "Values in this column are for Silent mode" -msgstr "Values in this column are for Silent mode" - -#: src/slic3r/GUI/Tab.cpp:2095 -msgid "Silent" -msgstr "Silent" - -#: src/slic3r/GUI/Tab.cpp:2103 -msgid "Maximum feedrates" -msgstr "Maximum feedrates" - -#: src/slic3r/GUI/Tab.cpp:2108 -msgid "Maximum accelerations" -msgstr "Maximum accelerations" - -#: src/slic3r/GUI/Tab.cpp:2115 -msgid "Jerk limits" -msgstr "Jerk limits" - -#: src/slic3r/GUI/Tab.cpp:2120 -msgid "Minimum feedrates" -msgstr "Minimum feedrates" - -#: src/slic3r/GUI/Tab.cpp:2158 src/slic3r/GUI/Tab.cpp:2166 -msgid "Single extruder MM setup" -msgstr "Single extruder MM setup" - -#: src/slic3r/GUI/Tab.cpp:2167 -msgid "Single extruder multimaterial parameters" -msgstr "Single extruder multimaterial parameters" - -#: src/slic3r/GUI/Tab.cpp:2181 src/libslic3r/GCode/PreviewData.cpp:475 -#, c-format -msgid "Extruder %d" -msgstr "Extruder %d" - -#: src/slic3r/GUI/Tab.cpp:2188 -msgid "Layer height limits" -msgstr "Layer height limits" - -#: src/slic3r/GUI/Tab.cpp:2193 -msgid "Position (for multi-extruder printers)" -msgstr "Position (for multi-extruder printers)" - -#: src/slic3r/GUI/Tab.cpp:2196 -msgid "Retraction" -msgstr "Retraction" - -#: src/slic3r/GUI/Tab.cpp:2199 -msgid "Only lift Z" -msgstr "Only lift Z" - -#: src/slic3r/GUI/Tab.cpp:2212 -msgid "" -"Retraction when tool is disabled (advanced settings for multi-extruder " -"setups)" -msgstr "" -"Retraction when tool is disabled (advanced settings for multi-extruder " -"setups)" - -#: src/slic3r/GUI/Tab.cpp:2216 -msgid "Preview" -msgstr "Preview" - -#: src/slic3r/GUI/Tab.cpp:2352 -msgid "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Shall I disable it in order to enable Firmware Retraction?" -msgstr "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Shall I disable it in order to enable Firmware Retraction?" - -#: src/slic3r/GUI/Tab.cpp:2354 -msgid "Firmware Retraction" -msgstr "Firmware Retraction" - -#: src/slic3r/GUI/Tab.cpp:2681 -#, c-format -msgid "Default preset (%s)" -msgstr "Default preset (%s)" - -#: src/slic3r/GUI/Tab.cpp:2682 -#, c-format -msgid "Preset (%s)" -msgstr "Preset (%s)" - -#: src/slic3r/GUI/Tab.cpp:2699 -msgid "has the following unsaved changes:" -msgstr "has the following unsaved changes:" - -#: src/slic3r/GUI/Tab.cpp:2702 -msgid "is not compatible with printer" -msgstr "is not compatible with printer" - -#: src/slic3r/GUI/Tab.cpp:2703 -msgid "is not compatible with print profile" -msgstr "is not compatible with print profile" - -#: src/slic3r/GUI/Tab.cpp:2705 -msgid "and it has the following unsaved changes:" -msgstr "and it has the following unsaved changes:" - -#: src/slic3r/GUI/Tab.cpp:2708 -msgid "Discard changes and continue anyway?" -msgstr "Discard changes and continue anyway?" - -#: src/slic3r/GUI/Tab.cpp:2709 -msgid "Unsaved Changes" -msgstr "Unsaved Changes" - -#: src/slic3r/GUI/Tab.cpp:2721 -msgid "Please check your object list before preset changing." -msgstr "Please check your object list before preset changing." - -#: src/slic3r/GUI/Tab.cpp:2801 -msgid "Copy" -msgstr "Copy" - -#: src/slic3r/GUI/Tab.cpp:2823 -msgid "The supplied name is empty. It can't be saved." -msgstr "The supplied name is empty. It can't be saved." - -#: src/slic3r/GUI/Tab.cpp:2828 -msgid "Cannot overwrite a system profile." -msgstr "Cannot overwrite a system profile." - -#: src/slic3r/GUI/Tab.cpp:2832 -msgid "Cannot overwrite an external profile." -msgstr "Cannot overwrite an external profile." - -#: src/slic3r/GUI/Tab.cpp:2858 -msgid "remove" -msgstr "remove" - -#: src/slic3r/GUI/Tab.cpp:2858 -msgid "delete" -msgstr "delete" - -#: src/slic3r/GUI/Tab.cpp:2859 -msgid "Are you sure you want to " -msgstr "Are you sure you want to " - -#: src/slic3r/GUI/Tab.cpp:2859 -msgid " the selected preset?" -msgstr " the selected preset?" - -#: src/slic3r/GUI/Tab.cpp:2860 -msgid "Remove" -msgstr "Remove" - -#: src/slic3r/GUI/Tab.cpp:2861 -msgid " Preset" -msgstr " Preset" - -#: src/slic3r/GUI/Tab.cpp:2989 -msgid "" -"LOCKED LOCK;indicates that the settings are the same as the system values " -"for the current option group" -msgstr "" -"LOCKED LOCK;indicates that the settings are the same as the system values " -"for the current option group" - -#: src/slic3r/GUI/Tab.cpp:2992 -msgid "" -"UNLOCKED LOCK;indicates that some settings were changed and are not equal to " -"the system values for the current option group.\n" -"Click the UNLOCKED LOCK icon to reset all settings for current option group " -"to the system values." -msgstr "" -"UNLOCKED LOCK;indicates that some settings were changed and are not equal to " -"the system values for the current option group.\n" -"Click the UNLOCKED LOCK icon to reset all settings for current option group " -"to the system values." - -#: src/slic3r/GUI/Tab.cpp:2998 -msgid "" -"WHITE BULLET;for the left button: \tindicates a non-system preset,\n" -"for the right button: \tindicates that the settings hasn't been modified." -msgstr "" -"WHITE BULLET;for the left button: \tindicates a non-system preset,\n" -"for the right button: \tindicates that the settings hasn't been modified." - -#: src/slic3r/GUI/Tab.cpp:3002 -msgid "" -"BACK ARROW;indicates that the settings were changed and are not equal to the " -"last saved preset for the current option group.\n" -"Click the BACK ARROW icon to reset all settings for the current option group " -"to the last saved preset." -msgstr "" -"BACK ARROW;indicates that the settings were changed and are not equal to the " -"last saved preset for the current option group.\n" -"Click the BACK ARROW icon to reset all settings for the current option group " -"to the last saved preset." - -#: src/slic3r/GUI/Tab.cpp:3028 -msgid "" -"LOCKED LOCK icon indicates that the settings are the same as the system " -"values for the current option group" -msgstr "" -"LOCKED LOCK icon indicates that the settings are the same as the system " -"values for the current option group" - -#: src/slic3r/GUI/Tab.cpp:3030 -msgid "" -"UNLOCKED LOCK icon indicates that some settings were changed and are not " -"equal to the system values for the current option group.\n" -"Click to reset all settings for current option group to the system values." -msgstr "" -"UNLOCKED LOCK icon indicates that some settings were changed and are not " -"equal to the system values for the current option group.\n" -"Click to reset all settings for current option group to the system values." - -#: src/slic3r/GUI/Tab.cpp:3033 -msgid "WHITE BULLET icon indicates a non system preset." -msgstr "WHITE BULLET icon indicates a non system preset." - -#: src/slic3r/GUI/Tab.cpp:3036 -msgid "" -"WHITE BULLET icon indicates that the settings are the same as in the last " -"saved preset for the current option group." -msgstr "" -"WHITE BULLET icon indicates that the settings are the same as in the last " -"saved preset for the current option group." - -#: src/slic3r/GUI/Tab.cpp:3038 -msgid "" -"BACK ARROW icon indicates that the settings were changed and are not equal " -"to the last saved preset for the current option group.\n" -"Click to reset all settings for the current option group to the last saved " -"preset." -msgstr "" -"BACK ARROW icon indicates that the settings were changed and are not equal " -"to the last saved preset for the current option group.\n" -"Click to reset all settings for the current option group to the last saved " -"preset." - -#: src/slic3r/GUI/Tab.cpp:3044 -msgid "" -"LOCKED LOCK icon indicates that the value is the same as the system value." -msgstr "" -"LOCKED LOCK icon indicates that the value is the same as the system value." - -#: src/slic3r/GUI/Tab.cpp:3045 -msgid "" -"UNLOCKED LOCK icon indicates that the value was changed and is not equal to " -"the system value.\n" -"Click to reset current value to the system value." -msgstr "" -"UNLOCKED LOCK icon indicates that the value was changed and is not equal to " -"the system value.\n" -"Click to reset current value to the system value." - -#: src/slic3r/GUI/Tab.cpp:3051 -msgid "" -"WHITE BULLET icon indicates that the value is the same as in the last saved " -"preset." -msgstr "" -"WHITE BULLET icon indicates that the value is the same as in the last saved " -"preset." - -#: src/slic3r/GUI/Tab.cpp:3052 -msgid "" -"BACK ARROW icon indicates that the value was changed and is not equal to the " -"last saved preset.\n" -"Click to reset current value to the last saved preset." -msgstr "" -"BACK ARROW icon indicates that the value was changed and is not equal to the " -"last saved preset.\n" -"Click to reset current value to the last saved preset." - -#: src/slic3r/GUI/Tab.cpp:3152 -msgid " as:" -msgstr " as:" - -#: src/slic3r/GUI/Tab.cpp:3196 -msgid "the following postfix are not allowed:" -msgstr "the following postfix are not allowed:" - -#: src/slic3r/GUI/Tab.cpp:3200 -msgid "The supplied name is not available." -msgstr "The supplied name is not available." - -#: src/slic3r/GUI/Tab.cpp:3213 -msgid "Material" -msgstr "Material" - -#: src/slic3r/GUI/Tab.cpp:3215 src/slic3r/GUI/Tab.cpp:3305 -msgid "Layers" -msgstr "Layers" - -#: src/slic3r/GUI/Tab.cpp:3219 -msgid "Exposure" -msgstr "Exposure" - -#: src/slic3r/GUI/Tab.cpp:3313 -msgid "Support head" -msgstr "Support head" - -#: src/slic3r/GUI/Tab.cpp:3318 -msgid "Support pillar" -msgstr "Support pillar" - -#: src/slic3r/GUI/Tab.cpp:3328 -msgid "Connection of the support sticks and junctions" -msgstr "Connection of the support sticks and junctions" - -#: src/slic3r/GUI/Tab.cpp:3333 -msgid "Automatic generation" -msgstr "Automatic generation" - -#: src/slic3r/GUI/Tab.cpp:3395 -msgid "Head penetration should not be greater than the head width." -msgstr "Head penetration should not be greater than the head width." - -#: src/slic3r/GUI/Tab.cpp:3396 -msgid "Invalid Head penetration" -msgstr "Invalid Head penetration" - -#: src/slic3r/GUI/Tab.cpp:3408 -msgid "Pinhead diameter should be smaller than the pillar diameter." -msgstr "Pinhead diameter should be smaller than the pillar diameter." - -#: src/slic3r/GUI/Tab.cpp:3409 -msgid "Invalid pinhead diameter" -msgstr "Invalid pinhead diameter" - -#: src/slic3r/GUI/Tab.hpp:307 src/slic3r/GUI/Tab.hpp:395 -msgid "Print Settings" -msgstr "Print Settings" - -#: src/slic3r/GUI/Tab.hpp:325 -msgid "Filament Settings" -msgstr "Filament Settings" - -#: src/slic3r/GUI/Tab.hpp:358 -msgid "Printer Settings" -msgstr "Printer Settings" - -#: src/slic3r/GUI/Tab.hpp:381 -msgid "Material Settings" -msgstr "Material Settings" - -#: src/slic3r/GUI/Tab.hpp:407 -msgid "Save preset" -msgstr "Save preset" - -#: src/slic3r/GUI/UpdateDialogs.cpp:29 -msgid "Update available" -msgstr "Update available" - -#: src/slic3r/GUI/UpdateDialogs.cpp:29 -msgid "New version of Slic3r PE is available" -msgstr "New version of Slic3r PE is available" - -#: src/slic3r/GUI/UpdateDialogs.cpp:36 -msgid "To download, follow the link below." -msgstr "To download, follow the link below." - -#: src/slic3r/GUI/UpdateDialogs.cpp:44 -msgid "Current version:" -msgstr "Current version:" - -#: src/slic3r/GUI/UpdateDialogs.cpp:46 -msgid "New version:" -msgstr "New version:" - -#: src/slic3r/GUI/UpdateDialogs.cpp:54 -msgid "Don't notify about new releases any more" -msgstr "Don't notify about new releases any more" - -#: src/slic3r/GUI/UpdateDialogs.cpp:72 src/slic3r/GUI/UpdateDialogs.cpp:164 -msgid "Configuration update" -msgstr "Configuration update" - -#: src/slic3r/GUI/UpdateDialogs.cpp:72 -msgid "Configuration update is available" -msgstr "Configuration update is available" - -#: src/slic3r/GUI/UpdateDialogs.cpp:75 -msgid "" -"Would you like to install it?\n" -"\n" -"Note that a full configuration snapshot will be created first. It can then " -"be restored at any time should there be a problem with the new version.\n" -"\n" -"Updated configuration bundles:" -msgstr "" -"Would you like to install it?\n" -"\n" -"Note that a full configuration snapshot will be created first. It can then " -"be restored at any time should there be a problem with the new version.\n" -"\n" -"Updated configuration bundles:" - -#: src/slic3r/GUI/UpdateDialogs.cpp:111 -msgid "Slic3r incompatibility" -msgstr "Slic3r incompatibility" - -#: src/slic3r/GUI/UpdateDialogs.cpp:111 -msgid "Slic3r configuration is incompatible" -msgstr "Slic3r configuration is incompatible" - -#: src/slic3r/GUI/UpdateDialogs.cpp:114 -msgid "" -"This version of Slic3r PE is not compatible with currently installed " -"configuration bundles.\n" -"This probably happened as a result of running an older Slic3r PE after using " -"a newer one.\n" -"\n" -"You may either exit Slic3r and try again with a newer version, or you may re-" -"run the initial configuration. Doing so will create a backup snapshot of the " -"existing configuration before installing files compatible with this Slic3r.\n" -msgstr "" -"This version of Slic3r PE is not compatible with currently installed " -"configuration bundles.\n" -"This probably happened as a result of running an older Slic3r PE after using " -"a newer one.\n" -"\n" -"You may either exit Slic3r and try again with a newer version, or you may re-" -"run the initial configuration. Doing so will create a backup snapshot of the " -"existing configuration before installing files compatible with this Slic3r.\n" - -#: src/slic3r/GUI/UpdateDialogs.cpp:123 -#, c-format -msgid "This Slic3r PE version: %s" -msgstr "This Slic3r PE version: %s" - -#: src/slic3r/GUI/UpdateDialogs.cpp:128 -msgid "Incompatible bundles:" -msgstr "Incompatible bundles:" - -#: src/slic3r/GUI/UpdateDialogs.cpp:144 -msgid "Exit Slic3r" -msgstr "Exit Slic3r" - -#: src/slic3r/GUI/UpdateDialogs.cpp:147 -msgid "Re-configure" -msgstr "Re-configure" - -#: src/slic3r/GUI/UpdateDialogs.cpp:168 -#, c-format -msgid "" -"Slic3r PE now uses an updated configuration structure.\n" -"\n" -"So called 'System presets' have been introduced, which hold the built-in " -"default settings for various printers. These System presets cannot be " -"modified, instead, users now may create their own presets inheriting " -"settings from one of the System presets.\n" -"An inheriting preset may either inherit a particular value from its parent " -"or override it with a customized value.\n" -"\n" -"Please proceed with the %s that follows to set up the new presets and to " -"choose whether to enable automatic preset updates." -msgstr "" -"Slic3r PE now uses an updated configuration structure.\n" -"\n" -"So called 'System presets' have been introduced, which hold the built-in " -"default settings for various printers. These System presets cannot be " -"modified, instead, users now may create their own presets inheriting " -"settings from one of the System presets.\n" -"An inheriting preset may either inherit a particular value from its parent " -"or override it with a customized value.\n" -"\n" -"Please proceed with the %s that follows to set up the new presets and to " -"choose whether to enable automatic preset updates." - -#: src/slic3r/GUI/UpdateDialogs.cpp:184 -msgid "For more information please visit our wiki page:" -msgstr "For more information please visit our wiki page:" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:14 -msgid "Ramming customization" -msgstr "Ramming customization" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:40 -msgid "" -"Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the " -"unloaded filament so it does not prevent insertion of the new filament and " -"can itself be reinserted later. This phase is important and different " -"materials can require different extrusion speeds to get the good shape. For " -"this reason, the extrusion rates during ramming are adjustable.\n" -"\n" -"This is an expert-level setting, incorrect adjustment will likely lead to " -"jams, extruder wheel grinding into filament etc." -msgstr "" -"Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the " -"unloaded filament so it does not prevent insertion of the new filament and " -"can itself be reinserted later. This phase is important and different " -"materials can require different extrusion speeds to get the good shape. For " -"this reason, the extrusion rates during ramming are adjustable.\n" -"\n" -"This is an expert-level setting, incorrect adjustment will likely lead to " -"jams, extruder wheel grinding into filament etc." - -#: src/slic3r/GUI/WipeTowerDialog.cpp:82 -msgid "Total ramming time" -msgstr "Total ramming time" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:84 -msgid "Total rammed volume" -msgstr "Total rammed volume" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:88 -msgid "Ramming line width" -msgstr "Ramming line width" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:90 -msgid "Ramming line spacing" -msgstr "Ramming line spacing" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:141 -msgid "Wipe tower - Purging volume adjustment" -msgstr "Wipe tower - Purging volume adjustment" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:225 -msgid "" -"Here you can adjust required purging volume (mm³) for any given pair of " -"tools." -msgstr "" -"Here you can adjust required purging volume (mm³) for any given pair of " -"tools." - -#: src/slic3r/GUI/WipeTowerDialog.cpp:226 -msgid "Extruder changed to" -msgstr "Extruder changed to" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:234 -msgid "unloaded" -msgstr "unloaded" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:235 -msgid "loaded" -msgstr "loaded" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:240 -msgid "Tool #" -msgstr "Tool #" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:247 -msgid "" -"Total purging volume is calculated by summing two values below, depending on " -"which tools are loaded/unloaded." -msgstr "" -"Total purging volume is calculated by summing two values below, depending on " -"which tools are loaded/unloaded." - -#: src/slic3r/GUI/WipeTowerDialog.cpp:248 -msgid "Volume to purge (mm³) when the filament is being" -msgstr "Volume to purge (mm³) when the filament is being" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:262 -msgid "From" -msgstr "From" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:327 -msgid "" -"Switching to simple settings will discard changes done in the advanced " -"mode!\n" -"\n" -"Do you want to proceed?" -msgstr "" -"Switching to simple settings will discard changes done in the advanced " -"mode!\n" -"\n" -"Do you want to proceed?" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:339 -msgid "Show simplified settings" -msgstr "Show simplified settings" - -#: src/slic3r/GUI/WipeTowerDialog.cpp:339 -msgid "Show advanced settings" -msgstr "Show advanced settings" - -#: src/slic3r/GUI/wxExtensions.cpp:2398 -#, c-format -msgid "Switch to the %s mode" -msgstr "Switch to the %s mode" - -#: src/slic3r/GUI/wxExtensions.cpp:2399 -#, c-format -msgid "Current mode is %s" -msgstr "Current mode is %s" - -#: src/slic3r/Utils/Duet.cpp:51 -msgid "Connection to Duet works correctly." -msgstr "Connection to Duet works correctly." - -#: src/slic3r/Utils/Duet.cpp:56 -msgid "Could not connect to Duet" -msgstr "Could not connect to Duet" - -#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154 -msgid "Unknown error occured" -msgstr "Unknown error occured" - -#: src/slic3r/Utils/Duet.cpp:148 -msgid "Wrong password" -msgstr "Wrong password" - -#: src/slic3r/Utils/Duet.cpp:151 -msgid "Could not get resources to create a new connection" -msgstr "Could not get resources to create a new connection" - -#: src/slic3r/Utils/OctoPrint.cpp:69 -#, c-format -msgid "Mismatched type of print host: %s" -msgstr "Mismatched type of print host: %s" - -#: src/slic3r/Utils/OctoPrint.cpp:84 -msgid "Connection to OctoPrint works correctly." -msgstr "Connection to OctoPrint works correctly." - -#: src/slic3r/Utils/OctoPrint.cpp:90 -msgid "Could not connect to OctoPrint" -msgstr "Could not connect to OctoPrint" - -#: src/slic3r/Utils/OctoPrint.cpp:90 -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Note: OctoPrint version at least 1.1.0 is required." - -#: src/slic3r/Utils/OctoPrint.cpp:195 -msgid "Connection to Prusa SLA works correctly." -msgstr "Connection to Prusa SLA works correctly." - -#: src/slic3r/Utils/OctoPrint.cpp:200 -msgid "Could not connect to Prusa SLA" -msgstr "Could not connect to Prusa SLA" - -#: src/slic3r/Utils/PresetUpdater.cpp:583 -#, c-format -msgid "requires min. %s and max. %s" -msgstr "requires min. %s and max. %s" - -#: src/slic3r/Utils/PresetUpdater.cpp:588 -#, c-format -msgid "requires min. %s" -msgstr "requires min. %s" - -#: src/slic3r/Utils/PresetUpdater.cpp:590 -#, c-format -msgid "requires max. %s" -msgstr "requires max. %s" - -#: src/slic3r/Utils/FixModelByWin10.cpp:219 -#: src/slic3r/Utils/FixModelByWin10.cpp:359 -msgid "Exporting source model" -msgstr "Exporting source model" - -#: src/slic3r/Utils/FixModelByWin10.cpp:235 -msgid "Failed loading the input model." -msgstr "Failed loading the input model." - -#: src/slic3r/Utils/FixModelByWin10.cpp:242 -msgid "Repairing model by the Netfabb service" -msgstr "Repairing model by the Netfabb service" - -#: src/slic3r/Utils/FixModelByWin10.cpp:248 -msgid "Mesh repair failed." -msgstr "Mesh repair failed." - -#: src/slic3r/Utils/FixModelByWin10.cpp:251 -#: src/slic3r/Utils/FixModelByWin10.cpp:378 -msgid "Loading repaired model" -msgstr "Loading repaired model" - -#: src/slic3r/Utils/FixModelByWin10.cpp:263 -#: src/slic3r/Utils/FixModelByWin10.cpp:270 -#: src/slic3r/Utils/FixModelByWin10.cpp:302 -msgid "Saving mesh into the 3MF container failed." -msgstr "Saving mesh into the 3MF container failed." - -#: src/slic3r/Utils/FixModelByWin10.cpp:340 -msgid "Model fixing" -msgstr "Model fixing" - -#: src/slic3r/Utils/FixModelByWin10.cpp:341 -msgid "Exporting model..." -msgstr "Exporting model..." - -#: src/slic3r/Utils/FixModelByWin10.cpp:368 -msgid "Export of a temporary 3mf file failed" -msgstr "Export of a temporary 3mf file failed" - -#: src/slic3r/Utils/FixModelByWin10.cpp:383 -msgid "Import of the repaired 3mf file failed" -msgstr "Import of the repaired 3mf file failed" - -#: src/slic3r/Utils/FixModelByWin10.cpp:385 -msgid "Repaired 3MF file does not contain any object" -msgstr "Repaired 3MF file does not contain any object" - -#: src/slic3r/Utils/FixModelByWin10.cpp:387 -msgid "Repaired 3MF file contains more than one object" -msgstr "Repaired 3MF file contains more than one object" - -#: src/slic3r/Utils/FixModelByWin10.cpp:389 -msgid "Repaired 3MF file does not contain any volume" -msgstr "Repaired 3MF file does not contain any volume" - -#: src/slic3r/Utils/FixModelByWin10.cpp:391 -msgid "Repaired 3MF file contains more than one volume" -msgstr "Repaired 3MF file contains more than one volume" - -#: src/slic3r/Utils/FixModelByWin10.cpp:400 -msgid "Model repair finished" -msgstr "Model repair finished" - -#: src/slic3r/Utils/FixModelByWin10.cpp:406 -msgid "Model repair canceled" -msgstr "Model repair canceled" - -#: src/slic3r/Utils/FixModelByWin10.cpp:423 -msgid "Model repaired successfully" -msgstr "Model repaired successfully" - -#: src/slic3r/Utils/FixModelByWin10.cpp:423 -#: src/slic3r/Utils/FixModelByWin10.cpp:426 -msgid "Model Repair by the Netfabb service" -msgstr "Model Repair by the Netfabb service" - -#: src/slic3r/Utils/FixModelByWin10.cpp:426 -msgid "Model repair failed: \n" -msgstr "Model repair failed: \n" - -#: src/libslic3r/Zipper.cpp:35 -msgid "undefined error" -msgstr "undefined error" - -#: src/libslic3r/Zipper.cpp:37 -msgid "too many files" -msgstr "too many files" - -#: src/libslic3r/Zipper.cpp:39 -msgid "file too large" -msgstr "file too large" - -#: src/libslic3r/Zipper.cpp:41 -msgid "unsupported method" -msgstr "unsupported method" - -#: src/libslic3r/Zipper.cpp:43 -msgid "unsupported encryption" -msgstr "unsupported encryption" - -#: src/libslic3r/Zipper.cpp:45 -msgid "unsupported feature" -msgstr "unsupported feature" - -#: src/libslic3r/Zipper.cpp:47 -msgid "failed finding central directory" -msgstr "failed finding central directory" - -#: src/libslic3r/Zipper.cpp:49 -msgid "not a ZIP archive" -msgstr "not a ZIP archive" - -#: src/libslic3r/Zipper.cpp:51 -msgid "invalid header or archive is corrupted" -msgstr "invalid header or archive is corrupted" - -#: src/libslic3r/Zipper.cpp:53 -msgid "unsupported multidisk archive" -msgstr "unsupported multidisk archive" - -#: src/libslic3r/Zipper.cpp:55 -msgid "decompression failed or archive is corrupted" -msgstr "decompression failed or archive is corrupted" - -#: src/libslic3r/Zipper.cpp:57 -msgid "compression failed" -msgstr "compression failed" - -#: src/libslic3r/Zipper.cpp:59 -msgid "unexpected decompressed size" -msgstr "unexpected decompressed size" - -#: src/libslic3r/Zipper.cpp:61 -msgid "CRC-32 check failed" -msgstr "CRC-32 check failed" - -#: src/libslic3r/Zipper.cpp:63 -msgid "unsupported central directory size" -msgstr "unsupported central directory size" - -#: src/libslic3r/Zipper.cpp:65 -msgid "allocation failed" -msgstr "allocation failed" - -#: src/libslic3r/Zipper.cpp:67 -msgid "file open failed" -msgstr "file open failed" - -#: src/libslic3r/Zipper.cpp:69 -msgid "file create failed" -msgstr "file create failed" - -#: src/libslic3r/Zipper.cpp:71 -msgid "file write failed" -msgstr "file write failed" - -#: src/libslic3r/Zipper.cpp:73 -msgid "file read failed" -msgstr "file read failed" - -#: src/libslic3r/Zipper.cpp:75 -msgid "file close failed" -msgstr "file close failed" - -#: src/libslic3r/Zipper.cpp:77 -msgid "file seek failed" -msgstr "file seek failed" - -#: src/libslic3r/Zipper.cpp:79 -msgid "file stat failed" -msgstr "file stat failed" - -#: src/libslic3r/Zipper.cpp:81 -msgid "invalid parameter" -msgstr "invalid parameter" - -#: src/libslic3r/Zipper.cpp:83 -msgid "invalid filename" -msgstr "invalid filename" - -#: src/libslic3r/Zipper.cpp:85 -msgid "buffer too small" -msgstr "buffer too small" - -#: src/libslic3r/Zipper.cpp:87 -msgid "internal error" -msgstr "internal error" - -#: src/libslic3r/Zipper.cpp:89 -msgid "file not found" -msgstr "file not found" - -#: src/libslic3r/Zipper.cpp:91 -msgid "archive is too large" -msgstr "archive is too large" - -#: src/libslic3r/Zipper.cpp:93 -msgid "validation failed" -msgstr "validation failed" - -#: src/libslic3r/Zipper.cpp:95 -msgid "write calledback failed" -msgstr "write calledback failed" - -#: src/libslic3r/Zipper.cpp:105 -msgid "Error with zip archive" -msgstr "Error with zip archive" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2153 -msgid "Starting" -msgstr "Starting" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2154 -msgid "Filtering" -msgstr "Filtering" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2155 -msgid "Generate pinheads" -msgstr "Generate pinheads" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2156 -msgid "Classification" -msgstr "Classification" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2157 -msgid "Routing to ground" -msgstr "Routing to ground" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2158 -msgid "Routing supports to model surface" -msgstr "Routing supports to model surface" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2159 -msgid "Cascading pillars" -msgstr "Cascading pillars" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2160 -msgid "Processing small holes" -msgstr "Processing small holes" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2161 -msgid "Done" -msgstr "Done" - -#: src/libslic3r/SLA/SLASupportTree.cpp:2162 -msgid "Abort" -msgstr "Abort" - -#: src/libslic3r/Print.cpp:1136 -msgid "All objects are outside of the print volume." -msgstr "All objects are outside of the print volume." - -#: src/libslic3r/Print.cpp:1165 -msgid "Some objects are too close; your extruder will collide with them." -msgstr "Some objects are too close; your extruder will collide with them." - -#: src/libslic3r/Print.cpp:1180 -msgid "" -"Some objects are too tall and cannot be printed without extruder collisions." -msgstr "" -"Some objects are too tall and cannot be printed without extruder collisions." - -#: src/libslic3r/Print.cpp:1190 -msgid "The Spiral Vase option can only be used when printing a single object." -msgstr "The Spiral Vase option can only be used when printing a single object." - -#: src/libslic3r/Print.cpp:1192 -msgid "" -"The Spiral Vase option can only be used when printing single material " -"objects." -msgstr "" -"The Spiral Vase option can only be used when printing single material " -"objects." - -#: src/libslic3r/Print.cpp:1198 -msgid "" -"All extruders must have the same diameter for single extruder multimaterial " -"printer." -msgstr "" -"All extruders must have the same diameter for single extruder multimaterial " -"printer." - -#: src/libslic3r/Print.cpp:1203 -msgid "" -"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " -"and Repetier G-code flavors." -msgstr "" -"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " -"and Repetier G-code flavors." - -#: src/libslic3r/Print.cpp:1205 -msgid "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." -msgstr "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." - -#: src/libslic3r/Print.cpp:1226 -msgid "" -"The Wipe Tower is only supported for multiple objects if they have equal " -"layer heigths" -msgstr "" -"The Wipe Tower is only supported for multiple objects if they have equal " -"layer heigths" - -#: src/libslic3r/Print.cpp:1228 -msgid "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"over an equal number of raft layers" -msgstr "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"over an equal number of raft layers" - -#: src/libslic3r/Print.cpp:1230 -msgid "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"with the same support_material_contact_distance" -msgstr "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"with the same support_material_contact_distance" - -#: src/libslic3r/Print.cpp:1232 -msgid "" -"The Wipe Tower is only supported for multiple objects if they are sliced " -"equally." -msgstr "" -"The Wipe Tower is only supported for multiple objects if they are sliced " -"equally." - -#: src/libslic3r/Print.cpp:1261 -msgid "" -"The Wipe tower is only supported if all objects have the same layer height " -"profile" -msgstr "" -"The Wipe tower is only supported if all objects have the same layer height " -"profile" - -#: src/libslic3r/Print.cpp:1271 -msgid "The supplied settings will cause an empty print." -msgstr "The supplied settings will cause an empty print." - -#: src/libslic3r/Print.cpp:1288 -msgid "" -"One or more object were assigned an extruder that the printer does not have." -msgstr "" -"One or more object were assigned an extruder that the printer does not have." - -#: src/libslic3r/Print.cpp:1297 -msgid "" -"Printing with multiple extruders of differing nozzle diameters. If support " -"is to be printed with the current extruder (support_material_extruder == 0 " -"or support_material_interface_extruder == 0), all nozzles have to be of the " -"same diameter." -msgstr "" -"Printing with multiple extruders of differing nozzle diameters. If support " -"is to be printed with the current extruder (support_material_extruder == 0 " -"or support_material_interface_extruder == 0), all nozzles have to be of the " -"same diameter." - -#: src/libslic3r/Print.cpp:1305 -msgid "" -"For the Wipe Tower to work with the soluble supports, the support layers " -"need to be synchronized with the object layers." -msgstr "" -"For the Wipe Tower to work with the soluble supports, the support layers " -"need to be synchronized with the object layers." - -#: src/libslic3r/Print.cpp:1309 -msgid "" -"The Wipe Tower currently supports the non-soluble supports only if they are " -"printed with the current extruder without triggering a tool change. (both " -"support_material_extruder and support_material_interface_extruder need to be " -"set to 0)." -msgstr "" -"The Wipe Tower currently supports the non-soluble supports only if they are " -"printed with the current extruder without triggering a tool change. (both " -"support_material_extruder and support_material_interface_extruder need to be " -"set to 0)." - -#: src/libslic3r/Print.cpp:1316 -msgid "first_layer_height" -msgstr "first_layer_height" - -#: src/libslic3r/Print.cpp:1331 -msgid "First layer height can't be greater than nozzle diameter" -msgstr "First layer height can't be greater than nozzle diameter" - -#: src/libslic3r/Print.cpp:1335 -msgid "Layer height can't be greater than nozzle diameter" -msgstr "Layer height can't be greater than nozzle diameter" - -#: src/libslic3r/SLAPrint.cpp:55 -msgid "Slicing model" -msgstr "Slicing model" - -#: src/libslic3r/SLAPrint.cpp:56 src/libslic3r/SLAPrint.cpp:801 -msgid "Generating support points" -msgstr "Generating support points" - -#: src/libslic3r/SLAPrint.cpp:57 -msgid "Generating support tree" -msgstr "Generating support tree" - -#: src/libslic3r/SLAPrint.cpp:58 -msgid "Generating pad" -msgstr "Generating pad" - -#: src/libslic3r/SLAPrint.cpp:59 -msgid "Slicing supports" -msgstr "Slicing supports" - -#: src/libslic3r/SLAPrint.cpp:71 -msgid "Merging slices and calculating statistics" -msgstr "Merging slices and calculating statistics" - -#: src/libslic3r/SLAPrint.cpp:72 -msgid "Rasterizing layers" -msgstr "Rasterizing layers" - -#: src/libslic3r/SLAPrint.cpp:605 -msgid "" -"Cannot proceed without support points! Add support points or disable support " -"generation." -msgstr "" -"Cannot proceed without support points! Add support points or disable support " -"generation." - -#: src/libslic3r/SLAPrint.cpp:617 -msgid "Elevation is too low for object." -msgstr "Elevation is too low for object." - -#: src/libslic3r/SLAPrint.cpp:699 -msgid "Slicing had to be stopped due to an internal error." -msgstr "Slicing had to be stopped due to an internal error." - -#: src/libslic3r/SLAPrint.cpp:849 src/libslic3r/SLAPrint.cpp:859 -#: src/libslic3r/SLAPrint.cpp:907 -msgid "Visualizing supports" -msgstr "Visualizing supports" - -#: src/libslic3r/SLAPrint.cpp:1449 -msgid "Slicing done" -msgstr "Slicing done" - -#: src/libslic3r/PrintBase.cpp:65 -msgid "Failed processing of the output_filename_format template." -msgstr "Failed processing of the output_filename_format template." - -#: src/libslic3r/PrintConfig.cpp:42 src/libslic3r/PrintConfig.cpp:43 -msgid "Printer technology" -msgstr "Printer technology" - -#: src/libslic3r/PrintConfig.cpp:50 -msgid "Bed shape" -msgstr "Bed shape" - -#: src/libslic3r/PrintConfig.cpp:57 -msgid "" -"This setting controls the height (and thus the total number) of the slices/" -"layers. Thinner layers give better accuracy but take more time to print." -msgstr "" -"This setting controls the height (and thus the total number) of the slices/" -"layers. Thinner layers give better accuracy but take more time to print." - -#: src/libslic3r/PrintConfig.cpp:64 -msgid "Max print height" -msgstr "Max print height" - -#: src/libslic3r/PrintConfig.cpp:65 -msgid "" -"Set this to the maximum height that can be reached by your extruder while " -"printing." -msgstr "" -"Set this to the maximum height that can be reached by your extruder while " -"printing." - -#: src/libslic3r/PrintConfig.cpp:71 -msgid "Slice gap closing radius" -msgstr "Slice gap closing radius" - -#: src/libslic3r/PrintConfig.cpp:73 -msgid "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." -msgstr "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." - -#: src/libslic3r/PrintConfig.cpp:81 -msgid "Hostname, IP or URL" -msgstr "Hostname, IP or URL" - -#: src/libslic3r/PrintConfig.cpp:82 -msgid "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the hostname, IP address or URL of the printer host instance." -msgstr "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the hostname, IP address or URL of the printer host instance." - -#: src/libslic3r/PrintConfig.cpp:88 -msgid "API Key / Password" -msgstr "API Key / Password" - -#: src/libslic3r/PrintConfig.cpp:89 -msgid "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the API Key or the password required for authentication." -msgstr "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the API Key or the password required for authentication." - -#: src/libslic3r/PrintConfig.cpp:111 -msgid "Avoid crossing perimeters" -msgstr "Avoid crossing perimeters" - -#: src/libslic3r/PrintConfig.cpp:112 -msgid "" -"Optimize travel moves in order to minimize the crossing of perimeters. This " -"is mostly useful with Bowden extruders which suffer from oozing. This " -"feature slows down both the print and the G-code generation." -msgstr "" -"Optimize travel moves in order to minimize the crossing of perimeters. This " -"is mostly useful with Bowden extruders which suffer from oozing. This " -"feature slows down both the print and the G-code generation." - -#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:1976 -msgid "Other layers" -msgstr "Other layers" - -#: src/libslic3r/PrintConfig.cpp:120 -msgid "" -"Bed temperature for layers after the first one. Set this to zero to disable " -"bed temperature control commands in the output." -msgstr "" -"Bed temperature for layers after the first one. Set this to zero to disable " -"bed temperature control commands in the output." - -#: src/libslic3r/PrintConfig.cpp:122 -msgid "Bed temperature" -msgstr "Bed temperature" - -#: src/libslic3r/PrintConfig.cpp:129 -msgid "" -"This custom code is inserted at every layer change, right before the Z move. " -"Note that you can use placeholder variables for all Slic3r settings as well " -"as [layer_num] and [layer_z]." -msgstr "" -"This custom code is inserted at every layer change, right before the Z move. " -"Note that you can use placeholder variables for all Slic3r settings as well " -"as [layer_num] and [layer_z]." - -#: src/libslic3r/PrintConfig.cpp:139 -msgid "Between objects G-code" -msgstr "Between objects G-code" - -#: src/libslic3r/PrintConfig.cpp:140 -msgid "" -"This code is inserted between objects when using sequential printing. By " -"default extruder and bed temperature are reset using non-wait command; " -"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " -"will not add temperature commands. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S[first_layer_temperature]\" command wherever you want." -msgstr "" -"This code is inserted between objects when using sequential printing. By " -"default extruder and bed temperature are reset using non-wait command; " -"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " -"will not add temperature commands. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S[first_layer_temperature]\" command wherever you want." - -#: src/libslic3r/PrintConfig.cpp:150 -msgid "Number of solid layers to generate on bottom surfaces." -msgstr "Number of solid layers to generate on bottom surfaces." - -#: src/libslic3r/PrintConfig.cpp:151 -msgid "Bottom solid layers" -msgstr "Bottom solid layers" - -#: src/libslic3r/PrintConfig.cpp:156 -msgid "Bridge" -msgstr "Bridge" - -#: src/libslic3r/PrintConfig.cpp:157 -msgid "" -"This is the acceleration your printer will use for bridges. Set zero to " -"disable acceleration control for bridges." -msgstr "" -"This is the acceleration your printer will use for bridges. Set zero to " -"disable acceleration control for bridges." - -#: src/libslic3r/PrintConfig.cpp:159 src/libslic3r/PrintConfig.cpp:302 -#: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:935 -#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1133 -#: src/libslic3r/PrintConfig.cpp:1144 src/libslic3r/PrintConfig.cpp:1333 -msgid "mm/s²" -msgstr "mm/s²" - -#: src/libslic3r/PrintConfig.cpp:165 -msgid "Bridging angle" -msgstr "Bridging angle" - -#: src/libslic3r/PrintConfig.cpp:167 -msgid "" -"Bridging angle override. If left to zero, the bridging angle will be " -"calculated automatically. Otherwise the provided angle will be used for all " -"bridges. Use 180° for zero angle." -msgstr "" -"Bridging angle override. If left to zero, the bridging angle will be " -"calculated automatically. Otherwise the provided angle will be used for all " -"bridges. Use 180° for zero angle." - -#: src/libslic3r/PrintConfig.cpp:170 src/libslic3r/PrintConfig.cpp:732 -#: src/libslic3r/PrintConfig.cpp:1569 src/libslic3r/PrintConfig.cpp:1579 -#: src/libslic3r/PrintConfig.cpp:1807 src/libslic3r/PrintConfig.cpp:1961 -#: src/libslic3r/PrintConfig.cpp:2459 -msgid "°" -msgstr "°" - -#: src/libslic3r/PrintConfig.cpp:176 -msgid "Bridges fan speed" -msgstr "Bridges fan speed" - -#: src/libslic3r/PrintConfig.cpp:177 -msgid "This fan speed is enforced during all bridges and overhangs." -msgstr "This fan speed is enforced during all bridges and overhangs." - -#: src/libslic3r/PrintConfig.cpp:178 src/libslic3r/PrintConfig.cpp:744 -#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1216 -#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:2258 -#: src/libslic3r/PrintConfig.cpp:2498 -msgid "%" -msgstr "%" - -#: src/libslic3r/PrintConfig.cpp:185 -msgid "Bridge flow ratio" -msgstr "Bridge flow ratio" - -#: src/libslic3r/PrintConfig.cpp:187 -msgid "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this." -msgstr "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this." - -#: src/libslic3r/PrintConfig.cpp:197 -msgid "Bridges" -msgstr "Bridges" - -#: src/libslic3r/PrintConfig.cpp:199 -msgid "Speed for printing bridges." -msgstr "Speed for printing bridges." - -#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:576 -#: src/libslic3r/PrintConfig.cpp:584 src/libslic3r/PrintConfig.cpp:593 -#: src/libslic3r/PrintConfig.cpp:601 src/libslic3r/PrintConfig.cpp:628 -#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:873 -#: src/libslic3r/PrintConfig.cpp:1000 src/libslic3r/PrintConfig.cpp:1078 -#: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1111 -#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1175 -#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:1362 -#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1545 -#: src/libslic3r/PrintConfig.cpp:1940 src/libslic3r/PrintConfig.cpp:2051 -msgid "mm/s" -msgstr "mm/s" - -#: src/libslic3r/PrintConfig.cpp:207 -msgid "Brim width" -msgstr "Brim width" - -#: src/libslic3r/PrintConfig.cpp:208 -msgid "" -"Horizontal width of the brim that will be printed around each object on the " -"first layer." -msgstr "" -"Horizontal width of the brim that will be printed around each object on the " -"first layer." - -#: src/libslic3r/PrintConfig.cpp:215 -msgid "Clip multi-part objects" -msgstr "Clip multi-part objects" - -#: src/libslic3r/PrintConfig.cpp:216 -msgid "" -"When printing multi-material objects, this settings will make slic3r to clip " -"the overlapping object parts one by the other (2nd part will be clipped by " -"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." -msgstr "" -"When printing multi-material objects, this settings will make slic3r to clip " -"the overlapping object parts one by the other (2nd part will be clipped by " -"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." - -#: src/libslic3r/PrintConfig.cpp:223 -msgid "Colorprint height" -msgstr "Colorprint height" - -#: src/libslic3r/PrintConfig.cpp:224 -msgid "Heights at which a filament change is to occur. " -msgstr "Heights at which a filament change is to occur. " - -#: src/libslic3r/PrintConfig.cpp:234 -msgid "Compatible printers condition" -msgstr "Compatible printers condition" - -#: src/libslic3r/PrintConfig.cpp:235 -msgid "" -"A boolean expression using the configuration values of an active printer " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active printer profile." -msgstr "" -"A boolean expression using the configuration values of an active printer " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active printer profile." - -#: src/libslic3r/PrintConfig.cpp:249 -msgid "Compatible print profiles condition" -msgstr "Compatible print profiles condition" - -#: src/libslic3r/PrintConfig.cpp:250 -msgid "" -"A boolean expression using the configuration values of an active print " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active print profile." -msgstr "" -"A boolean expression using the configuration values of an active print " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active print profile." - -#: src/libslic3r/PrintConfig.cpp:267 -msgid "Complete individual objects" -msgstr "Complete individual objects" - -#: src/libslic3r/PrintConfig.cpp:268 -msgid "" -"When printing multiple objects or copies, this feature will complete each " -"object before moving onto next one (and starting it from its bottom layer). " -"This feature is useful to avoid the risk of ruined prints. Slic3r should " -"warn and prevent you from extruder collisions, but beware." -msgstr "" -"When printing multiple objects or copies, this feature will complete each " -"object before moving onto next one (and starting it from its bottom layer). " -"This feature is useful to avoid the risk of ruined prints. Slic3r should " -"warn and prevent you from extruder collisions, but beware." - -#: src/libslic3r/PrintConfig.cpp:276 -msgid "Enable auto cooling" -msgstr "Enable auto cooling" - -#: src/libslic3r/PrintConfig.cpp:277 -msgid "" -"This flag enables the automatic cooling logic that adjusts print speed and " -"fan speed according to layer printing time." -msgstr "" -"This flag enables the automatic cooling logic that adjusts print speed and " -"fan speed according to layer printing time." - -#: src/libslic3r/PrintConfig.cpp:282 -msgid "Cooling tube position" -msgstr "Cooling tube position" - -#: src/libslic3r/PrintConfig.cpp:283 -msgid "Distance of the center-point of the cooling tube from the extruder tip " -msgstr "" -"Distance of the center-point of the cooling tube from the extruder tip " - -#: src/libslic3r/PrintConfig.cpp:290 -msgid "Cooling tube length" -msgstr "Cooling tube length" - -#: src/libslic3r/PrintConfig.cpp:291 -msgid "Length of the cooling tube to limit space for cooling moves inside it " -msgstr "Length of the cooling tube to limit space for cooling moves inside it " - -#: src/libslic3r/PrintConfig.cpp:299 -msgid "" -"This is the acceleration your printer will be reset to after the role-" -"specific acceleration values are used (perimeter/infill). Set zero to " -"prevent resetting acceleration at all." -msgstr "" -"This is the acceleration your printer will be reset to after the role-" -"specific acceleration values are used (perimeter/infill). Set zero to " -"prevent resetting acceleration at all." - -#: src/libslic3r/PrintConfig.cpp:308 -msgid "Default filament profile" -msgstr "Default filament profile" - -#: src/libslic3r/PrintConfig.cpp:309 -msgid "" -"Default filament profile associated with the current printer profile. On " -"selection of the current printer profile, this filament profile will be " -"activated." -msgstr "" -"Default filament profile associated with the current printer profile. On " -"selection of the current printer profile, this filament profile will be " -"activated." - -#: src/libslic3r/PrintConfig.cpp:315 -msgid "Default print profile" -msgstr "Default print profile" - -#: src/libslic3r/PrintConfig.cpp:316 src/libslic3r/PrintConfig.cpp:2337 -#: src/libslic3r/PrintConfig.cpp:2348 -msgid "" -"Default print profile associated with the current printer profile. On " -"selection of the current printer profile, this print profile will be " -"activated." -msgstr "" -"Default print profile associated with the current printer profile. On " -"selection of the current printer profile, this print profile will be " -"activated." - -#: src/libslic3r/PrintConfig.cpp:322 -msgid "Disable fan for the first" -msgstr "Disable fan for the first" - -#: src/libslic3r/PrintConfig.cpp:323 -msgid "" -"You can set this to a positive value to disable fan at all during the first " -"layers, so that it does not make adhesion worse." -msgstr "" -"You can set this to a positive value to disable fan at all during the first " -"layers, so that it does not make adhesion worse." - -#: src/libslic3r/PrintConfig.cpp:325 src/libslic3r/PrintConfig.cpp:945 -#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1619 -#: src/libslic3r/PrintConfig.cpp:1680 src/libslic3r/PrintConfig.cpp:1843 -#: src/libslic3r/PrintConfig.cpp:1888 -msgid "layers" -msgstr "layers" - -#: src/libslic3r/PrintConfig.cpp:332 -msgid "Don't support bridges" -msgstr "Don't support bridges" - -#: src/libslic3r/PrintConfig.cpp:334 -msgid "" -"Experimental option for preventing support material from being generated " -"under bridged areas." -msgstr "" -"Experimental option for preventing support material from being generated " -"under bridged areas." - -#: src/libslic3r/PrintConfig.cpp:340 -msgid "Distance between copies" -msgstr "Distance between copies" - -#: src/libslic3r/PrintConfig.cpp:341 -msgid "Distance used for the auto-arrange feature of the plater." -msgstr "Distance used for the auto-arrange feature of the plater." - -#: src/libslic3r/PrintConfig.cpp:348 -msgid "Elephant foot compensation" -msgstr "Elephant foot compensation" - -#: src/libslic3r/PrintConfig.cpp:350 -msgid "" -"The first layer will be shrunk in the XY plane by the configured value to " -"compensate for the 1st layer squish aka an Elephant Foot effect." -msgstr "" -"The first layer will be shrunk in the XY plane by the configured value to " -"compensate for the 1st layer squish aka an Elephant Foot effect." - -#: src/libslic3r/PrintConfig.cpp:359 -msgid "" -"This end procedure is inserted at the end of the output file. Note that you " -"can use placeholder variables for all Slic3r settings." -msgstr "" -"This end procedure is inserted at the end of the output file. Note that you " -"can use placeholder variables for all Slic3r settings." - -#: src/libslic3r/PrintConfig.cpp:369 -msgid "" -"This end procedure is inserted at the end of the output file, before the " -"printer end gcode. Note that you can use placeholder variables for all " -"Slic3r settings. If you have multiple extruders, the gcode is processed in " -"extruder order." -msgstr "" -"This end procedure is inserted at the end of the output file, before the " -"printer end gcode. Note that you can use placeholder variables for all " -"Slic3r settings. If you have multiple extruders, the gcode is processed in " -"extruder order." - -#: src/libslic3r/PrintConfig.cpp:379 -msgid "Ensure vertical shell thickness" -msgstr "Ensure vertical shell thickness" - -#: src/libslic3r/PrintConfig.cpp:381 -msgid "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)." -msgstr "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers)." - -#: src/libslic3r/PrintConfig.cpp:387 -msgid "Top fill pattern" -msgstr "Top fill pattern" - -#: src/libslic3r/PrintConfig.cpp:389 -msgid "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells." -msgstr "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells." - -#: src/libslic3r/PrintConfig.cpp:397 src/libslic3r/PrintConfig.cpp:795 -#: src/libslic3r/PrintConfig.cpp:1921 -msgid "Rectilinear" -msgstr "Rectilinear" - -#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:801 -msgid "Concentric" -msgstr "Concentric" - -#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:805 -msgid "Hilbert Curve" -msgstr "Hilbert Curve" - -#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:806 -msgid "Archimedean Chords" -msgstr "Archimedean Chords" - -#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807 -msgid "Octagram Spiral" -msgstr "Octagram Spiral" - -#: src/libslic3r/PrintConfig.cpp:408 -msgid "Bottom fill pattern" -msgstr "Bottom fill pattern" - -#: src/libslic3r/PrintConfig.cpp:409 -msgid "" -"Fill pattern for bottom infill. This only affects the bottom external " -"visible layer, and not its adjacent solid shells." -msgstr "" -"Fill pattern for bottom infill. This only affects the bottom external " -"visible layer, and not its adjacent solid shells." - -#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:424 -msgid "External perimeters" -msgstr "External perimeters" - -#: src/libslic3r/PrintConfig.cpp:416 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for external " -"perimeters. If left zero, default extrusion width will be used if set, " -"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " -"(for example 200%), it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for external " -"perimeters. If left zero, default extrusion width will be used if set, " -"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " -"(for example 200%), it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:834 -#: src/libslic3r/PrintConfig.cpp:966 src/libslic3r/PrintConfig.cpp:1353 -#: src/libslic3r/PrintConfig.cpp:1691 src/libslic3r/PrintConfig.cpp:1864 -#: src/libslic3r/PrintConfig.cpp:2022 -msgid "mm or % (leave 0 for default)" -msgstr "mm or % (leave 0 for default)" - -#: src/libslic3r/PrintConfig.cpp:426 -msgid "" -"This separate setting will affect the speed of external perimeters (the " -"visible ones). If expressed as percentage (for example: 80%) it will be " -"calculated on the perimeters speed setting above. Set to zero for auto." -msgstr "" -"This separate setting will affect the speed of external perimeters (the " -"visible ones). If expressed as percentage (for example: 80%) it will be " -"calculated on the perimeters speed setting above. Set to zero for auto." - -#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855 -#: src/libslic3r/PrintConfig.cpp:1650 src/libslic3r/PrintConfig.cpp:1701 -#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:2034 -msgid "mm/s or %" -msgstr "mm/s or %" - -#: src/libslic3r/PrintConfig.cpp:436 -msgid "External perimeters first" -msgstr "External perimeters first" - -#: src/libslic3r/PrintConfig.cpp:438 -msgid "" -"Print contour perimeters from the outermost one to the innermost one instead " -"of the default inverse order." -msgstr "" -"Print contour perimeters from the outermost one to the innermost one instead " -"of the default inverse order." - -#: src/libslic3r/PrintConfig.cpp:444 -msgid "Extra perimeters if needed" -msgstr "Extra perimeters if needed" - -#: src/libslic3r/PrintConfig.cpp:446 -#, no-c-format -msgid "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters, until more than 70% of the loop immediately above " -"is supported." -msgstr "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters, until more than 70% of the loop immediately above " -"is supported." - -#: src/libslic3r/PrintConfig.cpp:456 -msgid "" -"The extruder to use (unless more specific extruder settings are specified). " -"This value overrides perimeter and infill extruders, but not the support " -"extruders." -msgstr "" -"The extruder to use (unless more specific extruder settings are specified). " -"This value overrides perimeter and infill extruders, but not the support " -"extruders." - -#: src/libslic3r/PrintConfig.cpp:468 -msgid "" -"Set this to the vertical distance between your nozzle tip and (usually) the " -"X carriage rods. In other words, this is the height of the clearance " -"cylinder around your extruder, and it represents the maximum depth the " -"extruder can peek before colliding with other printed objects." -msgstr "" -"Set this to the vertical distance between your nozzle tip and (usually) the " -"X carriage rods. In other words, this is the height of the clearance " -"cylinder around your extruder, and it represents the maximum depth the " -"extruder can peek before colliding with other printed objects." - -#: src/libslic3r/PrintConfig.cpp:478 -msgid "Radius" -msgstr "Radius" - -#: src/libslic3r/PrintConfig.cpp:479 -msgid "" -"Set this to the clearance radius around your extruder. If the extruder is " -"not centered, choose the largest value for safety. This setting is used to " -"check for collisions and to display the graphical preview in the plater." -msgstr "" -"Set this to the clearance radius around your extruder. If the extruder is " -"not centered, choose the largest value for safety. This setting is used to " -"check for collisions and to display the graphical preview in the plater." - -#: src/libslic3r/PrintConfig.cpp:489 -msgid "Extruder Color" -msgstr "Extruder Color" - -#: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:550 -msgid "This is only used in the Slic3r interface as a visual help." -msgstr "This is only used in the Slic3r interface as a visual help." - -#: src/libslic3r/PrintConfig.cpp:496 -msgid "Extruder offset" -msgstr "Extruder offset" - -#: src/libslic3r/PrintConfig.cpp:497 -msgid "" -"If your firmware doesn't handle the extruder displacement you need the G-" -"code to take it into account. This option lets you specify the displacement " -"of each extruder with respect to the first one. It expects positive " -"coordinates (they will be subtracted from the XY coordinate)." -msgstr "" -"If your firmware doesn't handle the extruder displacement you need the G-" -"code to take it into account. This option lets you specify the displacement " -"of each extruder with respect to the first one. It expects positive " -"coordinates (they will be subtracted from the XY coordinate)." - -#: src/libslic3r/PrintConfig.cpp:506 -msgid "Extrusion axis" -msgstr "Extrusion axis" - -#: src/libslic3r/PrintConfig.cpp:507 -msgid "" -"Use this option to set the axis letter associated to your printer's extruder " -"(usually E but some printers use A)." -msgstr "" -"Use this option to set the axis letter associated to your printer's extruder " -"(usually E but some printers use A)." - -#: src/libslic3r/PrintConfig.cpp:512 -msgid "Extrusion multiplier" -msgstr "Extrusion multiplier" - -#: src/libslic3r/PrintConfig.cpp:513 -msgid "" -"This factor changes the amount of flow proportionally. You may need to tweak " -"this setting to get nice surface finish and correct single wall widths. " -"Usual values are between 0.9 and 1.1. If you think you need to change this " -"more, check filament diameter and your firmware E steps." -msgstr "" -"This factor changes the amount of flow proportionally. You may need to tweak " -"this setting to get nice surface finish and correct single wall widths. " -"Usual values are between 0.9 and 1.1. If you think you need to change this " -"more, check filament diameter and your firmware E steps." - -#: src/libslic3r/PrintConfig.cpp:521 -msgid "Default extrusion width" -msgstr "Default extrusion width" - -#: src/libslic3r/PrintConfig.cpp:523 -msgid "" -"Set this to a non-zero value to allow a manual extrusion width. If left to " -"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " -"tooltips for perimeter extrusion width, infill extrusion width etc). If " -"expressed as percentage (for example: 230%), it will be computed over layer " -"height." -msgstr "" -"Set this to a non-zero value to allow a manual extrusion width. If left to " -"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " -"tooltips for perimeter extrusion width, infill extrusion width etc). If " -"expressed as percentage (for example: 230%), it will be computed over layer " -"height." - -#: src/libslic3r/PrintConfig.cpp:527 -msgid "mm or % (leave 0 for auto)" -msgstr "mm or % (leave 0 for auto)" - -#: src/libslic3r/PrintConfig.cpp:532 -msgid "Keep fan always on" -msgstr "Keep fan always on" - -#: src/libslic3r/PrintConfig.cpp:533 -msgid "" -"If this is enabled, fan will never be disabled and will be kept running at " -"least at its minimum speed. Useful for PLA, harmful for ABS." -msgstr "" -"If this is enabled, fan will never be disabled and will be kept running at " -"least at its minimum speed. Useful for PLA, harmful for ABS." - -#: src/libslic3r/PrintConfig.cpp:538 -msgid "Enable fan if layer print time is below" -msgstr "Enable fan if layer print time is below" - -#: src/libslic3r/PrintConfig.cpp:539 -msgid "" -"If layer print time is estimated below this number of seconds, fan will be " -"enabled and its speed will be calculated by interpolating the minimum and " -"maximum speeds." -msgstr "" -"If layer print time is estimated below this number of seconds, fan will be " -"enabled and its speed will be calculated by interpolating the minimum and " -"maximum speeds." - -#: src/libslic3r/PrintConfig.cpp:541 src/libslic3r/PrintConfig.cpp:1637 -msgid "approximate seconds" -msgstr "approximate seconds" - -#: src/libslic3r/PrintConfig.cpp:549 -msgid "Color" -msgstr "Color" - -#: src/libslic3r/PrintConfig.cpp:555 -msgid "Filament notes" -msgstr "Filament notes" - -#: src/libslic3r/PrintConfig.cpp:556 -msgid "You can put your notes regarding the filament here." -msgstr "You can put your notes regarding the filament here." - -#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:1181 -msgid "Max volumetric speed" -msgstr "Max volumetric speed" - -#: src/libslic3r/PrintConfig.cpp:565 -msgid "" -"Maximum volumetric speed allowed for this filament. Limits the maximum " -"volumetric speed of a print to the minimum of print and filament volumetric " -"speed. Set to zero for no limit." -msgstr "" -"Maximum volumetric speed allowed for this filament. Limits the maximum " -"volumetric speed of a print to the minimum of print and filament volumetric " -"speed. Set to zero for no limit." - -#: src/libslic3r/PrintConfig.cpp:568 src/libslic3r/PrintConfig.cpp:1184 -msgid "mm³/s" -msgstr "mm³/s" - -#: src/libslic3r/PrintConfig.cpp:574 -msgid "Loading speed" -msgstr "Loading speed" - -#: src/libslic3r/PrintConfig.cpp:575 -msgid "Speed used for loading the filament on the wipe tower. " -msgstr "Speed used for loading the filament on the wipe tower. " - -#: src/libslic3r/PrintConfig.cpp:582 -msgid "Loading speed at the start" -msgstr "Loading speed at the start" - -#: src/libslic3r/PrintConfig.cpp:583 -msgid "Speed used at the very beginning of loading phase. " -msgstr "Speed used at the very beginning of loading phase. " - -#: src/libslic3r/PrintConfig.cpp:590 -msgid "Unloading speed" -msgstr "Unloading speed" - -#: src/libslic3r/PrintConfig.cpp:591 -msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming). " -msgstr "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming). " - -#: src/libslic3r/PrintConfig.cpp:599 -msgid "Unloading speed at the start" -msgstr "Unloading speed at the start" - -#: src/libslic3r/PrintConfig.cpp:600 -msgid "" -"Speed used for unloading the tip of the filament immediately after ramming. " -msgstr "" -"Speed used for unloading the tip of the filament immediately after ramming. " - -#: src/libslic3r/PrintConfig.cpp:607 -msgid "Delay after unloading" -msgstr "Delay after unloading" - -#: src/libslic3r/PrintConfig.cpp:608 -msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions. " -msgstr "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions. " - -#: src/libslic3r/PrintConfig.cpp:617 -msgid "Number of cooling moves" -msgstr "Number of cooling moves" - -#: src/libslic3r/PrintConfig.cpp:618 -msgid "" -"Filament is cooled by being moved back and forth in the cooling tubes. " -"Specify desired number of these moves " -msgstr "" -"Filament is cooled by being moved back and forth in the cooling tubes. " -"Specify desired number of these moves " - -#: src/libslic3r/PrintConfig.cpp:626 -msgid "Speed of the first cooling move" -msgstr "Speed of the first cooling move" - -#: src/libslic3r/PrintConfig.cpp:627 -msgid "Cooling moves are gradually accelerating beginning at this speed. " -msgstr "Cooling moves are gradually accelerating beginning at this speed. " - -#: src/libslic3r/PrintConfig.cpp:634 -msgid "Minimal purge on wipe tower" -msgstr "Minimal purge on wipe tower" - -#: src/libslic3r/PrintConfig.cpp:635 -msgid "" -"After a tool change, the exact position of the newly loaded filament inside " -"the nozzle may not be known, and the filament pressure is likely not yet " -"stable. Before purging the print head into an infill or a sacrificial " -"object, Slic3r will always prime this amount of material into the wipe tower " -"to produce successive infill or sacrificial object extrusions reliably." -msgstr "" -"After a tool change, the exact position of the newly loaded filament inside " -"the nozzle may not be known, and the filament pressure is likely not yet " -"stable. Before purging the print head into an infill or a sacrificial " -"object, Slic3r will always prime this amount of material into the wipe tower " -"to produce successive infill or sacrificial object extrusions reliably." - -#: src/libslic3r/PrintConfig.cpp:639 -msgid "mm³" -msgstr "mm³" - -#: src/libslic3r/PrintConfig.cpp:645 -msgid "Speed of the last cooling move" -msgstr "Speed of the last cooling move" - -#: src/libslic3r/PrintConfig.cpp:646 -msgid "Cooling moves are gradually accelerating towards this speed. " -msgstr "Cooling moves are gradually accelerating towards this speed. " - -#: src/libslic3r/PrintConfig.cpp:653 -msgid "Filament load time" -msgstr "Filament load time" - -#: src/libslic3r/PrintConfig.cpp:654 -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." - -#: src/libslic3r/PrintConfig.cpp:661 -msgid "Ramming parameters" -msgstr "Ramming parameters" - -#: src/libslic3r/PrintConfig.cpp:662 -msgid "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters " -msgstr "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters " - -#: src/libslic3r/PrintConfig.cpp:668 -msgid "Filament unload time" -msgstr "Filament unload time" - -#: src/libslic3r/PrintConfig.cpp:669 -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." - -#: src/libslic3r/PrintConfig.cpp:677 -msgid "" -"Enter your filament diameter here. Good precision is required, so use a " -"caliper and do multiple measurements along the filament, then compute the " -"average." -msgstr "" -"Enter your filament diameter here. Good precision is required, so use a " -"caliper and do multiple measurements along the filament, then compute the " -"average." - -#: src/libslic3r/PrintConfig.cpp:684 -msgid "Density" -msgstr "Density" - -#: src/libslic3r/PrintConfig.cpp:685 -msgid "" -"Enter your filament density here. This is only for statistical information. " -"A decent way is to weigh a known length of filament and compute the ratio of " -"the length to volume. Better is to calculate the volume directly through " -"displacement." -msgstr "" -"Enter your filament density here. This is only for statistical information. " -"A decent way is to weigh a known length of filament and compute the ratio of " -"the length to volume. Better is to calculate the volume directly through " -"displacement." - -#: src/libslic3r/PrintConfig.cpp:688 -msgid "g/cm³" -msgstr "g/cm³" - -#: src/libslic3r/PrintConfig.cpp:693 -msgid "Filament type" -msgstr "Filament type" - -#: src/libslic3r/PrintConfig.cpp:694 -msgid "The filament material type for use in custom G-codes." -msgstr "The filament material type for use in custom G-codes." - -#: src/libslic3r/PrintConfig.cpp:710 -msgid "Soluble material" -msgstr "Soluble material" - -#: src/libslic3r/PrintConfig.cpp:711 -msgid "Soluble material is most likely used for a soluble support." -msgstr "Soluble material is most likely used for a soluble support." - -#: src/libslic3r/PrintConfig.cpp:717 -msgid "" -"Enter your filament cost per kg here. This is only for statistical " -"information." -msgstr "" -"Enter your filament cost per kg here. This is only for statistical " -"information." - -#: src/libslic3r/PrintConfig.cpp:718 -msgid "money/kg" -msgstr "money/kg" - -#: src/libslic3r/PrintConfig.cpp:727 -msgid "Fill angle" -msgstr "Fill angle" - -#: src/libslic3r/PrintConfig.cpp:729 -msgid "" -"Default base angle for infill orientation. Cross-hatching will be applied to " -"this. Bridges will be infilled using the best direction Slic3r can detect, " -"so this setting does not affect them." -msgstr "" -"Default base angle for infill orientation. Cross-hatching will be applied to " -"this. Bridges will be infilled using the best direction Slic3r can detect, " -"so this setting does not affect them." - -#: src/libslic3r/PrintConfig.cpp:741 -msgid "Fill density" -msgstr "Fill density" - -#: src/libslic3r/PrintConfig.cpp:743 -msgid "Density of internal infill, expressed in the range 0% - 100%." -msgstr "Density of internal infill, expressed in the range 0% - 100%." - -#: src/libslic3r/PrintConfig.cpp:778 -msgid "Fill pattern" -msgstr "Fill pattern" - -#: src/libslic3r/PrintConfig.cpp:780 -msgid "Fill pattern for general low-density infill." -msgstr "Fill pattern for general low-density infill." - -#: src/libslic3r/PrintConfig.cpp:796 -msgid "Grid" -msgstr "Grid" - -#: src/libslic3r/PrintConfig.cpp:797 -msgid "Triangles" -msgstr "Triangles" - -#: src/libslic3r/PrintConfig.cpp:798 -msgid "Stars" -msgstr "Stars" - -#: src/libslic3r/PrintConfig.cpp:799 -msgid "Cubic" -msgstr "Cubic" - -#: src/libslic3r/PrintConfig.cpp:800 -msgid "Line" -msgstr "Line" - -#: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:1923 -msgid "Honeycomb" -msgstr "Honeycomb" - -#: src/libslic3r/PrintConfig.cpp:803 -msgid "3D Honeycomb" -msgstr "3D Honeycomb" - -#: src/libslic3r/PrintConfig.cpp:804 -msgid "Gyroid" -msgstr "Gyroid" - -#: src/libslic3r/PrintConfig.cpp:811 src/libslic3r/PrintConfig.cpp:820 -#: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:861 -msgid "First layer" -msgstr "First layer" - -#: src/libslic3r/PrintConfig.cpp:812 -msgid "" -"This is the acceleration your printer will use for first layer. Set zero to " -"disable acceleration control for first layer." -msgstr "" -"This is the acceleration your printer will use for first layer. Set zero to " -"disable acceleration control for first layer." - -#: src/libslic3r/PrintConfig.cpp:821 -msgid "" -"Heated build plate temperature for the first layer. Set this to zero to " -"disable bed temperature control commands in the output." -msgstr "" -"Heated build plate temperature for the first layer. Set this to zero to " -"disable bed temperature control commands in the output." - -#: src/libslic3r/PrintConfig.cpp:830 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for first " -"layer. You can use this to force fatter extrudates for better adhesion. If " -"expressed as percentage (for example 120%) it will be computed over first " -"layer height. If set to zero, it will use the default extrusion width." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for first " -"layer. You can use this to force fatter extrudates for better adhesion. If " -"expressed as percentage (for example 120%) it will be computed over first " -"layer height. If set to zero, it will use the default extrusion width." - -#: src/libslic3r/PrintConfig.cpp:840 -msgid "First layer height" -msgstr "First layer height" - -#: src/libslic3r/PrintConfig.cpp:842 -msgid "" -"When printing with very low layer heights, you might still want to print a " -"thicker bottom layer to improve adhesion and tolerance for non perfect build " -"plates. This can be expressed as an absolute value or as a percentage (for " -"example: 150%) over the default layer height." -msgstr "" -"When printing with very low layer heights, you might still want to print a " -"thicker bottom layer to improve adhesion and tolerance for non perfect build " -"plates. This can be expressed as an absolute value or as a percentage (for " -"example: 150%) over the default layer height." - -#: src/libslic3r/PrintConfig.cpp:846 src/libslic3r/PrintConfig.cpp:991 -#: src/libslic3r/PrintConfig.cpp:1796 -msgid "mm or %" -msgstr "mm or %" - -#: src/libslic3r/PrintConfig.cpp:851 -msgid "First layer speed" -msgstr "First layer speed" - -#: src/libslic3r/PrintConfig.cpp:852 -msgid "" -"If expressed as absolute value in mm/s, this speed will be applied to all " -"the print moves of the first layer, regardless of their type. If expressed " -"as a percentage (for example: 40%) it will scale the default speeds." -msgstr "" -"If expressed as absolute value in mm/s, this speed will be applied to all " -"the print moves of the first layer, regardless of their type. If expressed " -"as a percentage (for example: 40%) it will scale the default speeds." - -#: src/libslic3r/PrintConfig.cpp:862 -msgid "" -"Extruder temperature for first layer. If you want to control temperature " -"manually during print, set this to zero to disable temperature control " -"commands in the output file." -msgstr "" -"Extruder temperature for first layer. If you want to control temperature " -"manually during print, set this to zero to disable temperature control " -"commands in the output file." - -#: src/libslic3r/PrintConfig.cpp:871 -msgid "" -"Speed for filling small gaps using short zigzag moves. Keep this reasonably " -"low to avoid too much shaking and resonance issues. Set zero to disable gaps " -"filling." -msgstr "" -"Speed for filling small gaps using short zigzag moves. Keep this reasonably " -"low to avoid too much shaking and resonance issues. Set zero to disable gaps " -"filling." - -#: src/libslic3r/PrintConfig.cpp:879 -msgid "Verbose G-code" -msgstr "Verbose G-code" - -#: src/libslic3r/PrintConfig.cpp:880 -msgid "" -"Enable this to get a commented G-code file, with each line explained by a " -"descriptive text. If you print from SD card, the additional weight of the " -"file could make your firmware slow down." -msgstr "" -"Enable this to get a commented G-code file, with each line explained by a " -"descriptive text. If you print from SD card, the additional weight of the " -"file could make your firmware slow down." - -#: src/libslic3r/PrintConfig.cpp:887 -msgid "G-code flavor" -msgstr "G-code flavor" - -#: src/libslic3r/PrintConfig.cpp:888 -msgid "" -"Some G/M-code commands, including temperature control and others, are not " -"universal. Set this option to your printer's firmware to get a compatible " -"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " -"extrusion value at all." -msgstr "" -"Some G/M-code commands, including temperature control and others, are not " -"universal. Set this option to your printer's firmware to get a compatible " -"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " -"extrusion value at all." - -#: src/libslic3r/PrintConfig.cpp:911 -msgid "No extrusion" -msgstr "No extrusion" - -#: src/libslic3r/PrintConfig.cpp:924 -msgid "High extruder current on filament swap" -msgstr "High extruder current on filament swap" - -#: src/libslic3r/PrintConfig.cpp:925 -msgid "" -"It may be beneficial to increase the extruder motor current during the " -"filament exchange sequence to allow for rapid ramming feed rates and to " -"overcome resistance when loading a filament with an ugly shaped tip." -msgstr "" -"It may be beneficial to increase the extruder motor current during the " -"filament exchange sequence to allow for rapid ramming feed rates and to " -"overcome resistance when loading a filament with an ugly shaped tip." - -#: src/libslic3r/PrintConfig.cpp:933 -msgid "" -"This is the acceleration your printer will use for infill. Set zero to " -"disable acceleration control for infill." -msgstr "" -"This is the acceleration your printer will use for infill. Set zero to " -"disable acceleration control for infill." - -#: src/libslic3r/PrintConfig.cpp:941 -msgid "Combine infill every" -msgstr "Combine infill every" - -#: src/libslic3r/PrintConfig.cpp:943 -msgid "" -"This feature allows to combine infill and speed up your print by extruding " -"thicker infill layers while preserving thin perimeters, thus accuracy." -msgstr "" -"This feature allows to combine infill and speed up your print by extruding " -"thicker infill layers while preserving thin perimeters, thus accuracy." - -#: src/libslic3r/PrintConfig.cpp:946 -msgid "Combine infill every n layers" -msgstr "Combine infill every n layers" - -#: src/libslic3r/PrintConfig.cpp:952 -msgid "Infill extruder" -msgstr "Infill extruder" - -#: src/libslic3r/PrintConfig.cpp:954 -msgid "The extruder to use when printing infill." -msgstr "The extruder to use when printing infill." - -#: src/libslic3r/PrintConfig.cpp:962 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. You may want to use fatter extrudates to speed " -"up the infill and make your parts stronger. If expressed as percentage (for " -"example 90%) it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for infill. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. You may want to use fatter extrudates to speed " -"up the infill and make your parts stronger. If expressed as percentage (for " -"example 90%) it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:971 -msgid "Infill before perimeters" -msgstr "Infill before perimeters" - -#: src/libslic3r/PrintConfig.cpp:972 -msgid "" -"This option will switch the print order of perimeters and infill, making the " -"latter first." -msgstr "" -"This option will switch the print order of perimeters and infill, making the " -"latter first." - -#: src/libslic3r/PrintConfig.cpp:977 -msgid "Only infill where needed" -msgstr "Only infill where needed" - -#: src/libslic3r/PrintConfig.cpp:979 -msgid "" -"This option will limit infill to the areas actually needed for supporting " -"ceilings (it will act as internal support material). If enabled, slows down " -"the G-code generation due to the multiple checks involved." -msgstr "" -"This option will limit infill to the areas actually needed for supporting " -"ceilings (it will act as internal support material). If enabled, slows down " -"the G-code generation due to the multiple checks involved." - -#: src/libslic3r/PrintConfig.cpp:986 -msgid "Infill/perimeters overlap" -msgstr "Infill/perimeters overlap" - -#: src/libslic3r/PrintConfig.cpp:988 -msgid "" -"This setting applies an additional overlap between infill and perimeters for " -"better bonding. Theoretically this shouldn't be needed, but backlash might " -"cause gaps. If expressed as percentage (example: 15%) it is calculated over " -"perimeter extrusion width." -msgstr "" -"This setting applies an additional overlap between infill and perimeters for " -"better bonding. Theoretically this shouldn't be needed, but backlash might " -"cause gaps. If expressed as percentage (example: 15%) it is calculated over " -"perimeter extrusion width." - -#: src/libslic3r/PrintConfig.cpp:999 -msgid "Speed for printing the internal fill. Set to zero for auto." -msgstr "Speed for printing the internal fill. Set to zero for auto." - -#: src/libslic3r/PrintConfig.cpp:1007 -msgid "Inherits profile" -msgstr "Inherits profile" - -#: src/libslic3r/PrintConfig.cpp:1008 -msgid "Name of the profile, from which this profile inherits." -msgstr "Name of the profile, from which this profile inherits." - -#: src/libslic3r/PrintConfig.cpp:1021 -msgid "Interface shells" -msgstr "Interface shells" - -#: src/libslic3r/PrintConfig.cpp:1022 -msgid "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material." -msgstr "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material." - -#: src/libslic3r/PrintConfig.cpp:1031 -msgid "" -"This custom code is inserted at every layer change, right after the Z move " -"and before the extruder moves to the first layer point. Note that you can " -"use placeholder variables for all Slic3r settings as well as [layer_num] and " -"[layer_z]." -msgstr "" -"This custom code is inserted at every layer change, right after the Z move " -"and before the extruder moves to the first layer point. Note that you can " -"use placeholder variables for all Slic3r settings as well as [layer_num] and " -"[layer_z]." - -#: src/libslic3r/PrintConfig.cpp:1042 -msgid "Supports remaining times" -msgstr "Supports remaining times" - -#: src/libslic3r/PrintConfig.cpp:1043 -msgid "" -"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " -"intervals into the G-code to let the firmware show accurate remaining time. " -"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " -"firmware supports M73 Qxx Sxx for the silent mode." -msgstr "" -"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " -"intervals into the G-code to let the firmware show accurate remaining time. " -"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " -"firmware supports M73 Qxx Sxx for the silent mode." - -#: src/libslic3r/PrintConfig.cpp:1051 -msgid "Supports silent mode" -msgstr "Supports silent mode" - -#: src/libslic3r/PrintConfig.cpp:1052 -msgid "Set silent mode for the G-code flavor" -msgstr "Set silent mode for the G-code flavor" - -#: src/libslic3r/PrintConfig.cpp:1075 -msgid "Maximum feedrate %1%" -msgstr "Maximum feedrate %1%" - -#: src/libslic3r/PrintConfig.cpp:1077 -msgid "Maximum feedrate of the %1% axis" -msgstr "Maximum feedrate of the %1% axis" - -#: src/libslic3r/PrintConfig.cpp:1085 -msgid "Maximum acceleration %1%" -msgstr "Maximum acceleration %1%" - -#: src/libslic3r/PrintConfig.cpp:1087 -msgid "Maximum acceleration of the %1% axis" -msgstr "Maximum acceleration of the %1% axis" - -#: src/libslic3r/PrintConfig.cpp:1095 -msgid "Maximum jerk %1%" -msgstr "Maximum jerk %1%" - -#: src/libslic3r/PrintConfig.cpp:1097 -msgid "Maximum jerk of the %1% axis" -msgstr "Maximum jerk of the %1% axis" - -#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1110 -msgid "Minimum feedrate when extruding" -msgstr "Minimum feedrate when extruding" - -#: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1121 -msgid "Minimum travel feedrate" -msgstr "Minimum travel feedrate" - -#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1132 -msgid "Maximum acceleration when extruding" -msgstr "Maximum acceleration when extruding" - -#: src/libslic3r/PrintConfig.cpp:1141 src/libslic3r/PrintConfig.cpp:1143 -msgid "Maximum acceleration when retracting" -msgstr "Maximum acceleration when retracting" - -#: src/libslic3r/PrintConfig.cpp:1151 src/libslic3r/PrintConfig.cpp:1160 -msgid "Max" -msgstr "Max" - -#: src/libslic3r/PrintConfig.cpp:1152 -msgid "This setting represents the maximum speed of your fan." -msgstr "This setting represents the maximum speed of your fan." - -#: src/libslic3r/PrintConfig.cpp:1161 -#, no-c-format -msgid "" -"This is the highest printable layer height for this extruder, used to cap " -"the variable layer height and support layer height. Maximum recommended " -"layer height is 75% of the extrusion width to achieve reasonable inter-layer " -"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." -msgstr "" -"This is the highest printable layer height for this extruder, used to cap " -"the variable layer height and support layer height. Maximum recommended " -"layer height is 75% of the extrusion width to achieve reasonable inter-layer " -"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." - -#: src/libslic3r/PrintConfig.cpp:1171 -msgid "Max print speed" -msgstr "Max print speed" - -#: src/libslic3r/PrintConfig.cpp:1172 -msgid "" -"When setting other speed settings to 0 Slic3r will autocalculate the optimal " -"speed in order to keep constant extruder pressure. This experimental setting " -"is used to set the highest print speed you want to allow." -msgstr "" -"When setting other speed settings to 0 Slic3r will autocalculate the optimal " -"speed in order to keep constant extruder pressure. This experimental setting " -"is used to set the highest print speed you want to allow." - -#: src/libslic3r/PrintConfig.cpp:1182 -msgid "" -"This experimental setting is used to set the maximum volumetric speed your " -"extruder supports." -msgstr "" -"This experimental setting is used to set the maximum volumetric speed your " -"extruder supports." - -#: src/libslic3r/PrintConfig.cpp:1191 -msgid "Max volumetric slope positive" -msgstr "Max volumetric slope positive" - -#: src/libslic3r/PrintConfig.cpp:1192 src/libslic3r/PrintConfig.cpp:1203 -msgid "" -"This experimental setting is used to limit the speed of change in extrusion " -"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " -"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" -"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." -msgstr "" -"This experimental setting is used to limit the speed of change in extrusion " -"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " -"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" -"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." - -#: src/libslic3r/PrintConfig.cpp:1196 src/libslic3r/PrintConfig.cpp:1207 -msgid "mm³/s²" -msgstr "mm³/s²" - -#: src/libslic3r/PrintConfig.cpp:1202 -msgid "Max volumetric slope negative" -msgstr "Max volumetric slope negative" - -#: src/libslic3r/PrintConfig.cpp:1214 src/libslic3r/PrintConfig.cpp:1223 -msgid "Min" -msgstr "Min" - -#: src/libslic3r/PrintConfig.cpp:1215 -msgid "This setting represents the minimum PWM your fan needs to work." -msgstr "This setting represents the minimum PWM your fan needs to work." - -#: src/libslic3r/PrintConfig.cpp:1224 -msgid "" -"This is the lowest printable layer height for this extruder and limits the " -"resolution for variable layer height. Typical values are between 0.05 mm and " -"0.1 mm." -msgstr "" -"This is the lowest printable layer height for this extruder and limits the " -"resolution for variable layer height. Typical values are between 0.05 mm and " -"0.1 mm." - -#: src/libslic3r/PrintConfig.cpp:1232 -msgid "Min print speed" -msgstr "Min print speed" - -#: src/libslic3r/PrintConfig.cpp:1233 -msgid "Slic3r will not scale speed down below this speed." -msgstr "Slic3r will not scale speed down below this speed." - -#: src/libslic3r/PrintConfig.cpp:1240 -msgid "Minimal filament extrusion length" -msgstr "Minimal filament extrusion length" - -#: src/libslic3r/PrintConfig.cpp:1241 -msgid "" -"Generate no less than the number of skirt loops required to consume the " -"specified amount of filament on the bottom layer. For multi-extruder " -"machines, this minimum applies to each extruder." -msgstr "" -"Generate no less than the number of skirt loops required to consume the " -"specified amount of filament on the bottom layer. For multi-extruder " -"machines, this minimum applies to each extruder." - -#: src/libslic3r/PrintConfig.cpp:1250 -msgid "Configuration notes" -msgstr "Configuration notes" - -#: src/libslic3r/PrintConfig.cpp:1251 -msgid "" -"You can put here your personal notes. This text will be added to the G-code " -"header comments." -msgstr "" -"You can put here your personal notes. This text will be added to the G-code " -"header comments." - -#: src/libslic3r/PrintConfig.cpp:1260 -msgid "Nozzle diameter" -msgstr "Nozzle diameter" - -#: src/libslic3r/PrintConfig.cpp:1261 -msgid "" -"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" -msgstr "" -"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" - -#: src/libslic3r/PrintConfig.cpp:1266 -msgid "Host Type" -msgstr "Host Type" - -#: src/libslic3r/PrintConfig.cpp:1267 -msgid "" -"Slic3r can upload G-code files to a printer host. This field must contain " -"the kind of the host." -msgstr "" -"Slic3r can upload G-code files to a printer host. This field must contain " -"the kind of the host." - -#: src/libslic3r/PrintConfig.cpp:1278 -msgid "Only retract when crossing perimeters" -msgstr "Only retract when crossing perimeters" - -#: src/libslic3r/PrintConfig.cpp:1279 -msgid "" -"Disables retraction when the travel path does not exceed the upper layer's " -"perimeters (and thus any ooze will be probably invisible)." -msgstr "" -"Disables retraction when the travel path does not exceed the upper layer's " -"perimeters (and thus any ooze will be probably invisible)." - -#: src/libslic3r/PrintConfig.cpp:1286 -msgid "" -"This option will drop the temperature of the inactive extruders to prevent " -"oozing. It will enable a tall skirt automatically and move extruders outside " -"such skirt when changing temperatures." -msgstr "" -"This option will drop the temperature of the inactive extruders to prevent " -"oozing. It will enable a tall skirt automatically and move extruders outside " -"such skirt when changing temperatures." - -#: src/libslic3r/PrintConfig.cpp:1293 -msgid "Output filename format" -msgstr "Output filename format" - -#: src/libslic3r/PrintConfig.cpp:1294 -msgid "" -"You can use all configuration options as variables inside this template. For " -"example: [layer_height], [fill_density] etc. You can also use [timestamp], " -"[year], [month], [day], [hour], [minute], [second], [version], " -"[input_filename], [input_filename_base]." -msgstr "" -"You can use all configuration options as variables inside this template. For " -"example: [layer_height], [fill_density] etc. You can also use [timestamp], " -"[year], [month], [day], [hour], [minute], [second], [version], " -"[input_filename], [input_filename_base]." - -#: src/libslic3r/PrintConfig.cpp:1303 -msgid "Detect bridging perimeters" -msgstr "Detect bridging perimeters" - -#: src/libslic3r/PrintConfig.cpp:1305 -msgid "" -"Experimental option to adjust flow for overhangs (bridge flow will be used), " -"to apply bridge speed to them and enable fan." -msgstr "" -"Experimental option to adjust flow for overhangs (bridge flow will be used), " -"to apply bridge speed to them and enable fan." - -#: src/libslic3r/PrintConfig.cpp:1311 -msgid "Filament parking position" -msgstr "Filament parking position" - -#: src/libslic3r/PrintConfig.cpp:1312 -msgid "" -"Distance of the extruder tip from the position where the filament is parked " -"when unloaded. This should match the value in printer firmware. " -msgstr "" -"Distance of the extruder tip from the position where the filament is parked " -"when unloaded. This should match the value in printer firmware. " - -#: src/libslic3r/PrintConfig.cpp:1320 -msgid "Extra loading distance" -msgstr "Extra loading distance" - -#: src/libslic3r/PrintConfig.cpp:1321 -msgid "" -"When set to zero, the distance the filament is moved from parking position " -"during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " -"than unloading. " -msgstr "" -"When set to zero, the distance the filament is moved from parking position " -"during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " -"than unloading. " - -#: src/libslic3r/PrintConfig.cpp:1329 src/libslic3r/PrintConfig.cpp:1347 -#: src/libslic3r/PrintConfig.cpp:1359 src/libslic3r/PrintConfig.cpp:1369 -msgid "Perimeters" -msgstr "Perimeters" - -#: src/libslic3r/PrintConfig.cpp:1330 -msgid "" -"This is the acceleration your printer will use for perimeters. A high value " -"like 9000 usually gives good results if your hardware is up to the job. Set " -"zero to disable acceleration control for perimeters." -msgstr "" -"This is the acceleration your printer will use for perimeters. A high value " -"like 9000 usually gives good results if your hardware is up to the job. Set " -"zero to disable acceleration control for perimeters." - -#: src/libslic3r/PrintConfig.cpp:1338 -msgid "Perimeter extruder" -msgstr "Perimeter extruder" - -#: src/libslic3r/PrintConfig.cpp:1340 -msgid "" -"The extruder to use when printing perimeters and brim. First extruder is 1." -msgstr "" -"The extruder to use when printing perimeters and brim. First extruder is 1." - -#: src/libslic3r/PrintConfig.cpp:1349 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for perimeters. " -"You may want to use thinner extrudates to get more accurate surfaces. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. If expressed as percentage (for example 200%) " -"it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for perimeters. " -"You may want to use thinner extrudates to get more accurate surfaces. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. If expressed as percentage (for example 200%) " -"it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:1361 -msgid "" -"Speed for perimeters (contours, aka vertical shells). Set to zero for auto." -msgstr "" -"Speed for perimeters (contours, aka vertical shells). Set to zero for auto." - -#: src/libslic3r/PrintConfig.cpp:1371 -msgid "" -"This option sets the number of perimeters to generate for each layer. Note " -"that Slic3r may increase this number automatically when it detects sloping " -"surfaces which benefit from a higher number of perimeters if the Extra " -"Perimeters option is enabled." -msgstr "" -"This option sets the number of perimeters to generate for each layer. Note " -"that Slic3r may increase this number automatically when it detects sloping " -"surfaces which benefit from a higher number of perimeters if the Extra " -"Perimeters option is enabled." - -#: src/libslic3r/PrintConfig.cpp:1375 -msgid "(minimum)" -msgstr "(minimum)" - -#: src/libslic3r/PrintConfig.cpp:1383 -msgid "" -"If you want to process the output G-code through custom scripts, just list " -"their absolute paths here. Separate multiple scripts with a semicolon. " -"Scripts will be passed the absolute path to the G-code file as the first " -"argument, and they can access the Slic3r config settings by reading " -"environment variables." -msgstr "" -"If you want to process the output G-code through custom scripts, just list " -"their absolute paths here. Separate multiple scripts with a semicolon. " -"Scripts will be passed the absolute path to the G-code file as the first " -"argument, and they can access the Slic3r config settings by reading " -"environment variables." - -#: src/libslic3r/PrintConfig.cpp:1395 -msgid "Printer type" -msgstr "Printer type" - -#: src/libslic3r/PrintConfig.cpp:1396 -msgid "Type of the printer." -msgstr "Type of the printer." - -#: src/libslic3r/PrintConfig.cpp:1401 -msgid "Printer notes" -msgstr "Printer notes" - -#: src/libslic3r/PrintConfig.cpp:1402 -msgid "You can put your notes regarding the printer here." -msgstr "You can put your notes regarding the printer here." - -#: src/libslic3r/PrintConfig.cpp:1410 -msgid "Printer vendor" -msgstr "Printer vendor" - -#: src/libslic3r/PrintConfig.cpp:1411 -msgid "Name of the printer vendor." -msgstr "Name of the printer vendor." - -#: src/libslic3r/PrintConfig.cpp:1416 -msgid "Printer variant" -msgstr "Printer variant" - -#: src/libslic3r/PrintConfig.cpp:1417 -msgid "" -"Name of the printer variant. For example, the printer variants may be " -"differentiated by a nozzle diameter." -msgstr "" -"Name of the printer variant. For example, the printer variants may be " -"differentiated by a nozzle diameter." - -#: src/libslic3r/PrintConfig.cpp:1430 -msgid "Raft layers" -msgstr "Raft layers" - -#: src/libslic3r/PrintConfig.cpp:1432 -msgid "" -"The object will be raised by this number of layers, and support material " -"will be generated under it." -msgstr "" -"The object will be raised by this number of layers, and support material " -"will be generated under it." - -#: src/libslic3r/PrintConfig.cpp:1440 -msgid "Resolution" -msgstr "Resolution" - -#: src/libslic3r/PrintConfig.cpp:1441 -msgid "" -"Minimum detail resolution, used to simplify the input file for speeding up " -"the slicing job and reducing memory usage. High-resolution models often " -"carry more detail than printers can render. Set to zero to disable any " -"simplification and use full resolution from input." -msgstr "" -"Minimum detail resolution, used to simplify the input file for speeding up " -"the slicing job and reducing memory usage. High-resolution models often " -"carry more detail than printers can render. Set to zero to disable any " -"simplification and use full resolution from input." - -#: src/libslic3r/PrintConfig.cpp:1451 -msgid "Minimum travel after retraction" -msgstr "Minimum travel after retraction" - -#: src/libslic3r/PrintConfig.cpp:1452 -msgid "" -"Retraction is not triggered when travel moves are shorter than this length." -msgstr "" -"Retraction is not triggered when travel moves are shorter than this length." - -#: src/libslic3r/PrintConfig.cpp:1458 -msgid "Retract amount before wipe" -msgstr "Retract amount before wipe" - -#: src/libslic3r/PrintConfig.cpp:1459 -msgid "" -"With bowden extruders, it may be wise to do some amount of quick retract " -"before doing the wipe movement." -msgstr "" -"With bowden extruders, it may be wise to do some amount of quick retract " -"before doing the wipe movement." - -#: src/libslic3r/PrintConfig.cpp:1466 -msgid "Retract on layer change" -msgstr "Retract on layer change" - -#: src/libslic3r/PrintConfig.cpp:1467 -msgid "This flag enforces a retraction whenever a Z move is done." -msgstr "This flag enforces a retraction whenever a Z move is done." - -#: src/libslic3r/PrintConfig.cpp:1472 src/libslic3r/PrintConfig.cpp:1480 -msgid "Length" -msgstr "Length" - -#: src/libslic3r/PrintConfig.cpp:1473 -msgid "Retraction Length" -msgstr "Retraction Length" - -#: src/libslic3r/PrintConfig.cpp:1474 -msgid "" -"When retraction is triggered, filament is pulled back by the specified " -"amount (the length is measured on raw filament, before it enters the " -"extruder)." -msgstr "" -"When retraction is triggered, filament is pulled back by the specified " -"amount (the length is measured on raw filament, before it enters the " -"extruder)." - -#: src/libslic3r/PrintConfig.cpp:1476 src/libslic3r/PrintConfig.cpp:1485 -msgid "mm (zero to disable)" -msgstr "mm (zero to disable)" - -#: src/libslic3r/PrintConfig.cpp:1481 -msgid "Retraction Length (Toolchange)" -msgstr "Retraction Length (Toolchange)" - -#: src/libslic3r/PrintConfig.cpp:1482 -msgid "" -"When retraction is triggered before changing tool, filament is pulled back " -"by the specified amount (the length is measured on raw filament, before it " -"enters the extruder)." -msgstr "" -"When retraction is triggered before changing tool, filament is pulled back " -"by the specified amount (the length is measured on raw filament, before it " -"enters the extruder)." - -#: src/libslic3r/PrintConfig.cpp:1490 -msgid "Lift Z" -msgstr "Lift Z" - -#: src/libslic3r/PrintConfig.cpp:1491 -msgid "" -"If you set this to a positive value, Z is quickly raised every time a " -"retraction is triggered. When using multiple extruders, only the setting for " -"the first extruder will be considered." -msgstr "" -"If you set this to a positive value, Z is quickly raised every time a " -"retraction is triggered. When using multiple extruders, only the setting for " -"the first extruder will be considered." - -#: src/libslic3r/PrintConfig.cpp:1498 -msgid "Above Z" -msgstr "Above Z" - -#: src/libslic3r/PrintConfig.cpp:1499 -msgid "Only lift Z above" -msgstr "Only lift Z above" - -#: src/libslic3r/PrintConfig.cpp:1500 -msgid "" -"If you set this to a positive value, Z lift will only take place above the " -"specified absolute Z. You can tune this setting for skipping lift on the " -"first layers." -msgstr "" -"If you set this to a positive value, Z lift will only take place above the " -"specified absolute Z. You can tune this setting for skipping lift on the " -"first layers." - -#: src/libslic3r/PrintConfig.cpp:1507 -msgid "Below Z" -msgstr "Below Z" - -#: src/libslic3r/PrintConfig.cpp:1508 -msgid "Only lift Z below" -msgstr "Only lift Z below" - -#: src/libslic3r/PrintConfig.cpp:1509 -msgid "" -"If you set this to a positive value, Z lift will only take place below the " -"specified absolute Z. You can tune this setting for limiting lift to the " -"first layers." -msgstr "" -"If you set this to a positive value, Z lift will only take place below the " -"specified absolute Z. You can tune this setting for limiting lift to the " -"first layers." - -#: src/libslic3r/PrintConfig.cpp:1517 src/libslic3r/PrintConfig.cpp:1525 -msgid "Extra length on restart" -msgstr "Extra length on restart" - -#: src/libslic3r/PrintConfig.cpp:1518 -msgid "" -"When the retraction is compensated after the travel move, the extruder will " -"push this additional amount of filament. This setting is rarely needed." -msgstr "" -"When the retraction is compensated after the travel move, the extruder will " -"push this additional amount of filament. This setting is rarely needed." - -#: src/libslic3r/PrintConfig.cpp:1526 -msgid "" -"When the retraction is compensated after changing tool, the extruder will " -"push this additional amount of filament." -msgstr "" -"When the retraction is compensated after changing tool, the extruder will " -"push this additional amount of filament." - -#: src/libslic3r/PrintConfig.cpp:1533 src/libslic3r/PrintConfig.cpp:1534 -msgid "Retraction Speed" -msgstr "Retraction Speed" - -#: src/libslic3r/PrintConfig.cpp:1535 -msgid "The speed for retractions (it only applies to the extruder motor)." -msgstr "The speed for retractions (it only applies to the extruder motor)." - -#: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:1542 -msgid "Deretraction Speed" -msgstr "Deretraction Speed" - -#: src/libslic3r/PrintConfig.cpp:1543 -msgid "" -"The speed for loading of a filament into extruder after retraction (it only " -"applies to the extruder motor). If left to zero, the retraction speed is " -"used." -msgstr "" -"The speed for loading of a filament into extruder after retraction (it only " -"applies to the extruder motor). If left to zero, the retraction speed is " -"used." - -#: src/libslic3r/PrintConfig.cpp:1550 -msgid "Seam position" -msgstr "Seam position" - -#: src/libslic3r/PrintConfig.cpp:1552 -msgid "Position of perimeters starting points." -msgstr "Position of perimeters starting points." - -#: src/libslic3r/PrintConfig.cpp:1558 -msgid "Random" -msgstr "Random" - -#: src/libslic3r/PrintConfig.cpp:1559 -msgid "Nearest" -msgstr "Nearest" - -#: src/libslic3r/PrintConfig.cpp:1560 -msgid "Aligned" -msgstr "Aligned" - -#: src/libslic3r/PrintConfig.cpp:1568 -msgid "Direction" -msgstr "Direction" - -#: src/libslic3r/PrintConfig.cpp:1570 -msgid "Preferred direction of the seam" -msgstr "Preferred direction of the seam" - -#: src/libslic3r/PrintConfig.cpp:1571 -msgid "Seam preferred direction" -msgstr "Seam preferred direction" - -#: src/libslic3r/PrintConfig.cpp:1578 -msgid "Jitter" -msgstr "Jitter" - -#: src/libslic3r/PrintConfig.cpp:1580 -msgid "Seam preferred direction jitter" -msgstr "Seam preferred direction jitter" - -#: src/libslic3r/PrintConfig.cpp:1581 -msgid "Preferred direction of the seam - jitter" -msgstr "Preferred direction of the seam - jitter" - -#: src/libslic3r/PrintConfig.cpp:1591 -msgid "USB/serial port for printer connection." -msgstr "USB/serial port for printer connection." - -#: src/libslic3r/PrintConfig.cpp:1598 -msgid "Serial port speed" -msgstr "Serial port speed" - -#: src/libslic3r/PrintConfig.cpp:1599 -msgid "Speed (baud) of USB/serial port for printer connection." -msgstr "Speed (baud) of USB/serial port for printer connection." - -#: src/libslic3r/PrintConfig.cpp:1608 -msgid "Distance from object" -msgstr "Distance from object" - -#: src/libslic3r/PrintConfig.cpp:1609 -msgid "" -"Distance between skirt and object(s). Set this to zero to attach the skirt " -"to the object(s) and get a brim for better adhesion." -msgstr "" -"Distance between skirt and object(s). Set this to zero to attach the skirt " -"to the object(s) and get a brim for better adhesion." - -#: src/libslic3r/PrintConfig.cpp:1616 -msgid "Skirt height" -msgstr "Skirt height" - -#: src/libslic3r/PrintConfig.cpp:1617 -msgid "" -"Height of skirt expressed in layers. Set this to a tall value to use skirt " -"as a shield against drafts." -msgstr "" -"Height of skirt expressed in layers. Set this to a tall value to use skirt " -"as a shield against drafts." - -#: src/libslic3r/PrintConfig.cpp:1624 -msgid "Loops (minimum)" -msgstr "Loops (minimum)" - -#: src/libslic3r/PrintConfig.cpp:1625 -msgid "Skirt Loops" -msgstr "Skirt Loops" - -#: src/libslic3r/PrintConfig.cpp:1626 -msgid "" -"Number of loops for the skirt. If the Minimum Extrusion Length option is " -"set, the number of loops might be greater than the one configured here. Set " -"this to zero to disable skirt completely." -msgstr "" -"Number of loops for the skirt. If the Minimum Extrusion Length option is " -"set, the number of loops might be greater than the one configured here. Set " -"this to zero to disable skirt completely." - -#: src/libslic3r/PrintConfig.cpp:1634 -msgid "Slow down if layer print time is below" -msgstr "Slow down if layer print time is below" - -#: src/libslic3r/PrintConfig.cpp:1635 -msgid "" -"If layer print time is estimated below this number of seconds, print moves " -"speed will be scaled down to extend duration to this value." -msgstr "" -"If layer print time is estimated below this number of seconds, print moves " -"speed will be scaled down to extend duration to this value." - -#: src/libslic3r/PrintConfig.cpp:1645 -msgid "Small perimeters" -msgstr "Small perimeters" - -#: src/libslic3r/PrintConfig.cpp:1647 -msgid "" -"This separate setting will affect the speed of perimeters having radius <= " -"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " -"be calculated on the perimeters speed setting above. Set to zero for auto." -msgstr "" -"This separate setting will affect the speed of perimeters having radius <= " -"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " -"be calculated on the perimeters speed setting above. Set to zero for auto." - -#: src/libslic3r/PrintConfig.cpp:1657 -msgid "Solid infill threshold area" -msgstr "Solid infill threshold area" - -#: src/libslic3r/PrintConfig.cpp:1659 -msgid "" -"Force solid infill for regions having a smaller area than the specified " -"threshold." -msgstr "" -"Force solid infill for regions having a smaller area than the specified " -"threshold." - -#: src/libslic3r/PrintConfig.cpp:1660 -msgid "mm²" -msgstr "mm²" - -#: src/libslic3r/PrintConfig.cpp:1666 -msgid "Solid infill extruder" -msgstr "Solid infill extruder" - -#: src/libslic3r/PrintConfig.cpp:1668 -msgid "The extruder to use when printing solid infill." -msgstr "The extruder to use when printing solid infill." - -#: src/libslic3r/PrintConfig.cpp:1674 -msgid "Solid infill every" -msgstr "Solid infill every" - -#: src/libslic3r/PrintConfig.cpp:1676 -msgid "" -"This feature allows to force a solid layer every given number of layers. " -"Zero to disable. You can set this to any value (for example 9999); Slic3r " -"will automatically choose the maximum possible number of layers to combine " -"according to nozzle diameter and layer height." -msgstr "" -"This feature allows to force a solid layer every given number of layers. " -"Zero to disable. You can set this to any value (for example 9999); Slic3r " -"will automatically choose the maximum possible number of layers to combine " -"according to nozzle diameter and layer height." - -#: src/libslic3r/PrintConfig.cpp:1688 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"solid surfaces. If left zero, default extrusion width will be used if set, " -"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " -"(for example 90%) it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"solid surfaces. If left zero, default extrusion width will be used if set, " -"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " -"(for example 90%) it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:1698 -msgid "" -"Speed for printing solid regions (top/bottom/internal horizontal shells). " -"This can be expressed as a percentage (for example: 80%) over the default " -"infill speed above. Set to zero for auto." -msgstr "" -"Speed for printing solid regions (top/bottom/internal horizontal shells). " -"This can be expressed as a percentage (for example: 80%) over the default " -"infill speed above. Set to zero for auto." - -#: src/libslic3r/PrintConfig.cpp:1710 -msgid "Number of solid layers to generate on top and bottom surfaces." -msgstr "Number of solid layers to generate on top and bottom surfaces." - -#: src/libslic3r/PrintConfig.cpp:1716 -msgid "Spiral vase" -msgstr "Spiral vase" - -#: src/libslic3r/PrintConfig.cpp:1717 -msgid "" -"This feature will raise Z gradually while printing a single-walled object in " -"order to remove any visible seam. This option requires a single perimeter, " -"no infill, no top solid layers and no support material. You can still set " -"any number of bottom solid layers as well as skirt/brim loops. It won't work " -"when printing more than an object." -msgstr "" -"This feature will raise Z gradually while printing a single-walled object in " -"order to remove any visible seam. This option requires a single perimeter, " -"no infill, no top solid layers and no support material. You can still set " -"any number of bottom solid layers as well as skirt/brim loops. It won't work " -"when printing more than an object." - -#: src/libslic3r/PrintConfig.cpp:1725 -msgid "Temperature variation" -msgstr "Temperature variation" - -#: src/libslic3r/PrintConfig.cpp:1726 -msgid "" -"Temperature difference to be applied when an extruder is not active. Enables " -"a full-height \"sacrificial\" skirt on which the nozzles are periodically " -"wiped." -msgstr "" -"Temperature difference to be applied when an extruder is not active. Enables " -"a full-height \"sacrificial\" skirt on which the nozzles are periodically " -"wiped." - -#: src/libslic3r/PrintConfig.cpp:1736 -msgid "" -"This start procedure is inserted at the beginning, after bed has reached the " -"target temperature and extruder just started heating, and before extruder " -"has finished heating. If Slic3r detects M104 or M190 in your custom codes, " -"such commands will not be prepended automatically so you're free to " -"customize the order of heating commands and other custom actions. Note that " -"you can use placeholder variables for all Slic3r settings, so you can put a " -"\"M109 S[first_layer_temperature]\" command wherever you want." -msgstr "" -"This start procedure is inserted at the beginning, after bed has reached the " -"target temperature and extruder just started heating, and before extruder " -"has finished heating. If Slic3r detects M104 or M190 in your custom codes, " -"such commands will not be prepended automatically so you're free to " -"customize the order of heating commands and other custom actions. Note that " -"you can use placeholder variables for all Slic3r settings, so you can put a " -"\"M109 S[first_layer_temperature]\" command wherever you want." - -#: src/libslic3r/PrintConfig.cpp:1751 -msgid "" -"This start procedure is inserted at the beginning, after any printer start " -"gcode. This is used to override settings for a specific filament. If Slic3r " -"detects M104, M109, M140 or M190 in your custom codes, such commands will " -"not be prepended automatically so you're free to customize the order of " -"heating commands and other custom actions. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S[first_layer_temperature]\" command wherever you want. If you have multiple " -"extruders, the gcode is processed in extruder order." -msgstr "" -"This start procedure is inserted at the beginning, after any printer start " -"gcode. This is used to override settings for a specific filament. If Slic3r " -"detects M104, M109, M140 or M190 in your custom codes, such commands will " -"not be prepended automatically so you're free to customize the order of " -"heating commands and other custom actions. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S[first_layer_temperature]\" command wherever you want. If you have multiple " -"extruders, the gcode is processed in extruder order." - -#: src/libslic3r/PrintConfig.cpp:1766 -msgid "Single Extruder Multi Material" -msgstr "Single Extruder Multi Material" - -#: src/libslic3r/PrintConfig.cpp:1767 -msgid "The printer multiplexes filaments into a single hot end." -msgstr "The printer multiplexes filaments into a single hot end." - -#: src/libslic3r/PrintConfig.cpp:1772 -msgid "Prime all printing extruders" -msgstr "Prime all printing extruders" - -#: src/libslic3r/PrintConfig.cpp:1773 -msgid "" -"If enabled, all printing extruders will be primed at the front edge of the " -"print bed at the start of the print." -msgstr "" -"If enabled, all printing extruders will be primed at the front edge of the " -"print bed at the start of the print." - -#: src/libslic3r/PrintConfig.cpp:1778 -msgid "Generate support material" -msgstr "Generate support material" - -#: src/libslic3r/PrintConfig.cpp:1780 -msgid "Enable support material generation." -msgstr "Enable support material generation." - -#: src/libslic3r/PrintConfig.cpp:1784 -msgid "Auto generated supports" -msgstr "Auto generated supports" - -#: src/libslic3r/PrintConfig.cpp:1786 -msgid "" -"If checked, supports will be generated automatically based on the overhang " -"threshold value. If unchecked, supports will be generated inside the " -"\"Support Enforcer\" volumes only." -msgstr "" -"If checked, supports will be generated automatically based on the overhang " -"threshold value. If unchecked, supports will be generated inside the " -"\"Support Enforcer\" volumes only." - -#: src/libslic3r/PrintConfig.cpp:1792 -msgid "XY separation between an object and its support" -msgstr "XY separation between an object and its support" - -#: src/libslic3r/PrintConfig.cpp:1794 -msgid "" -"XY separation between an object and its support. If expressed as percentage " -"(for example 50%), it will be calculated over external perimeter width." -msgstr "" -"XY separation between an object and its support. If expressed as percentage " -"(for example 50%), it will be calculated over external perimeter width." - -#: src/libslic3r/PrintConfig.cpp:1804 -msgid "Pattern angle" -msgstr "Pattern angle" - -#: src/libslic3r/PrintConfig.cpp:1806 -msgid "" -"Use this setting to rotate the support material pattern on the horizontal " -"plane." -msgstr "" -"Use this setting to rotate the support material pattern on the horizontal " -"plane." - -#: src/libslic3r/PrintConfig.cpp:1816 src/libslic3r/PrintConfig.cpp:2421 -msgid "" -"Only create support if it lies on a build plate. Don't create support on a " -"print." -msgstr "" -"Only create support if it lies on a build plate. Don't create support on a " -"print." - -#: src/libslic3r/PrintConfig.cpp:1822 -msgid "Contact Z distance" -msgstr "Contact Z distance" - -#: src/libslic3r/PrintConfig.cpp:1824 -msgid "" -"The vertical distance between object and support material interface. Setting " -"this to 0 will also prevent Slic3r from using bridge flow and speed for the " -"first object layer." -msgstr "" -"The vertical distance between object and support material interface. Setting " -"this to 0 will also prevent Slic3r from using bridge flow and speed for the " -"first object layer." - -#: src/libslic3r/PrintConfig.cpp:1831 -msgid "soluble" -msgstr "soluble" - -#: src/libslic3r/PrintConfig.cpp:1832 -msgid "detachable" -msgstr "detachable" - -#: src/libslic3r/PrintConfig.cpp:1837 -msgid "Enforce support for the first" -msgstr "Enforce support for the first" - -#: src/libslic3r/PrintConfig.cpp:1839 -msgid "" -"Generate support material for the specified number of layers counting from " -"bottom, regardless of whether normal support material is enabled or not and " -"regardless of any angle threshold. This is useful for getting more adhesion " -"of objects having a very thin or poor footprint on the build plate." -msgstr "" -"Generate support material for the specified number of layers counting from " -"bottom, regardless of whether normal support material is enabled or not and " -"regardless of any angle threshold. This is useful for getting more adhesion " -"of objects having a very thin or poor footprint on the build plate." - -#: src/libslic3r/PrintConfig.cpp:1844 -msgid "Enforce support for the first n layers" -msgstr "Enforce support for the first n layers" - -#: src/libslic3r/PrintConfig.cpp:1850 -msgid "Support material/raft/skirt extruder" -msgstr "Support material/raft/skirt extruder" - -#: src/libslic3r/PrintConfig.cpp:1852 -msgid "" -"The extruder to use when printing support material, raft and skirt (1+, 0 to " -"use the current extruder to minimize tool changes)." -msgstr "" -"The extruder to use when printing support material, raft and skirt (1+, 0 to " -"use the current extruder to minimize tool changes)." - -#: src/libslic3r/PrintConfig.cpp:1861 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for support " -"material. If left zero, default extrusion width will be used if set, " -"otherwise nozzle diameter will be used. If expressed as percentage (for " -"example 90%) it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for support " -"material. If left zero, default extrusion width will be used if set, " -"otherwise nozzle diameter will be used. If expressed as percentage (for " -"example 90%) it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:1869 -msgid "Interface loops" -msgstr "Interface loops" - -#: src/libslic3r/PrintConfig.cpp:1871 -msgid "" -"Cover the top contact layer of the supports with loops. Disabled by default." -msgstr "" -"Cover the top contact layer of the supports with loops. Disabled by default." - -#: src/libslic3r/PrintConfig.cpp:1876 -msgid "Support material/raft interface extruder" -msgstr "Support material/raft interface extruder" - -#: src/libslic3r/PrintConfig.cpp:1878 -msgid "" -"The extruder to use when printing support material interface (1+, 0 to use " -"the current extruder to minimize tool changes). This affects raft too." -msgstr "" -"The extruder to use when printing support material interface (1+, 0 to use " -"the current extruder to minimize tool changes). This affects raft too." - -#: src/libslic3r/PrintConfig.cpp:1885 -msgid "Interface layers" -msgstr "Interface layers" - -#: src/libslic3r/PrintConfig.cpp:1887 -msgid "" -"Number of interface layers to insert between the object(s) and support " -"material." -msgstr "" -"Number of interface layers to insert between the object(s) and support " -"material." - -#: src/libslic3r/PrintConfig.cpp:1894 -msgid "Interface pattern spacing" -msgstr "Interface pattern spacing" - -#: src/libslic3r/PrintConfig.cpp:1896 -msgid "Spacing between interface lines. Set zero to get a solid interface." -msgstr "Spacing between interface lines. Set zero to get a solid interface." - -#: src/libslic3r/PrintConfig.cpp:1905 -msgid "" -"Speed for printing support material interface layers. If expressed as " -"percentage (for example 50%) it will be calculated over support material " -"speed." -msgstr "" -"Speed for printing support material interface layers. If expressed as " -"percentage (for example 50%) it will be calculated over support material " -"speed." - -#: src/libslic3r/PrintConfig.cpp:1914 -msgid "Pattern" -msgstr "Pattern" - -#: src/libslic3r/PrintConfig.cpp:1916 -msgid "Pattern used to generate support material." -msgstr "Pattern used to generate support material." - -#: src/libslic3r/PrintConfig.cpp:1922 -msgid "Rectilinear grid" -msgstr "Rectilinear grid" - -#: src/libslic3r/PrintConfig.cpp:1928 -msgid "Pattern spacing" -msgstr "Pattern spacing" - -#: src/libslic3r/PrintConfig.cpp:1930 -msgid "Spacing between support material lines." -msgstr "Spacing between support material lines." - -#: src/libslic3r/PrintConfig.cpp:1939 -msgid "Speed for printing support material." -msgstr "Speed for printing support material." - -#: src/libslic3r/PrintConfig.cpp:1946 -msgid "Synchronize with object layers" -msgstr "Synchronize with object layers" - -#: src/libslic3r/PrintConfig.cpp:1948 -msgid "" -"Synchronize support layers with the object print layers. This is useful with " -"multi-material printers, where the extruder switch is expensive." -msgstr "" -"Synchronize support layers with the object print layers. This is useful with " -"multi-material printers, where the extruder switch is expensive." - -#: src/libslic3r/PrintConfig.cpp:1954 -msgid "Overhang threshold" -msgstr "Overhang threshold" - -#: src/libslic3r/PrintConfig.cpp:1956 -msgid "" -"Support material will not be generated for overhangs whose slope angle (90° " -"= vertical) is above the given threshold. In other words, this value " -"represent the most horizontal slope (measured from the horizontal plane) " -"that you can print without support material. Set to zero for automatic " -"detection (recommended)." -msgstr "" -"Support material will not be generated for overhangs whose slope angle (90° " -"= vertical) is above the given threshold. In other words, this value " -"represent the most horizontal slope (measured from the horizontal plane) " -"that you can print without support material. Set to zero for automatic " -"detection (recommended)." - -#: src/libslic3r/PrintConfig.cpp:1968 -msgid "With sheath around the support" -msgstr "With sheath around the support" - -#: src/libslic3r/PrintConfig.cpp:1970 -msgid "" -"Add a sheath (a single perimeter line) around the base support. This makes " -"the support more reliable, but also more difficult to remove." -msgstr "" -"Add a sheath (a single perimeter line) around the base support. This makes " -"the support more reliable, but also more difficult to remove." - -#: src/libslic3r/PrintConfig.cpp:1977 -msgid "" -"Extruder temperature for layers after the first one. Set this to zero to " -"disable temperature control commands in the output." -msgstr "" -"Extruder temperature for layers after the first one. Set this to zero to " -"disable temperature control commands in the output." - -#: src/libslic3r/PrintConfig.cpp:1979 -msgid "Temperature" -msgstr "Temperature" - -#: src/libslic3r/PrintConfig.cpp:1985 -msgid "Detect thin walls" -msgstr "Detect thin walls" - -#: src/libslic3r/PrintConfig.cpp:1987 -msgid "" -"Detect single-width walls (parts where two extrusions don't fit and we need " -"to collapse them into a single trace)." -msgstr "" -"Detect single-width walls (parts where two extrusions don't fit and we need " -"to collapse them into a single trace)." - -#: src/libslic3r/PrintConfig.cpp:1993 -msgid "Threads" -msgstr "Threads" - -#: src/libslic3r/PrintConfig.cpp:1994 -msgid "" -"Threads are used to parallelize long-running tasks. Optimal threads number " -"is slightly above the number of available cores/processors." -msgstr "" -"Threads are used to parallelize long-running tasks. Optimal threads number " -"is slightly above the number of available cores/processors." - -#: src/libslic3r/PrintConfig.cpp:2006 -msgid "" -"This custom code is inserted right before every extruder change. Note that " -"you can use placeholder variables for all Slic3r settings as well as " -"[previous_extruder] and [next_extruder]." -msgstr "" -"This custom code is inserted right before every extruder change. Note that " -"you can use placeholder variables for all Slic3r settings as well as " -"[previous_extruder] and [next_extruder]." - -#: src/libslic3r/PrintConfig.cpp:2018 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"top surfaces. You may want to use thinner extrudates to fill all narrow " -"regions and get a smoother finish. If left zero, default extrusion width " -"will be used if set, otherwise nozzle diameter will be used. If expressed as " -"percentage (for example 90%) it will be computed over layer height." -msgstr "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"top surfaces. You may want to use thinner extrudates to fill all narrow " -"regions and get a smoother finish. If left zero, default extrusion width " -"will be used if set, otherwise nozzle diameter will be used. If expressed as " -"percentage (for example 90%) it will be computed over layer height." - -#: src/libslic3r/PrintConfig.cpp:2029 -msgid "" -"Speed for printing top solid layers (it only applies to the uppermost " -"external layers and not to their internal solid layers). You may want to " -"slow down this to get a nicer surface finish. This can be expressed as a " -"percentage (for example: 80%) over the solid infill speed above. Set to zero " -"for auto." -msgstr "" -"Speed for printing top solid layers (it only applies to the uppermost " -"external layers and not to their internal solid layers). You may want to " -"slow down this to get a nicer surface finish. This can be expressed as a " -"percentage (for example: 80%) over the solid infill speed above. Set to zero " -"for auto." - -#: src/libslic3r/PrintConfig.cpp:2043 -msgid "Number of solid layers to generate on top surfaces." -msgstr "Number of solid layers to generate on top surfaces." - -#: src/libslic3r/PrintConfig.cpp:2044 -msgid "Top solid layers" -msgstr "Top solid layers" - -#: src/libslic3r/PrintConfig.cpp:2050 -msgid "Speed for travel moves (jumps between distant extrusion points)." -msgstr "Speed for travel moves (jumps between distant extrusion points)." - -#: src/libslic3r/PrintConfig.cpp:2058 -msgid "Use firmware retraction" -msgstr "Use firmware retraction" - -#: src/libslic3r/PrintConfig.cpp:2059 -msgid "" -"This experimental setting uses G10 and G11 commands to have the firmware " -"handle the retraction. This is only supported in recent Marlin." -msgstr "" -"This experimental setting uses G10 and G11 commands to have the firmware " -"handle the retraction. This is only supported in recent Marlin." - -#: src/libslic3r/PrintConfig.cpp:2065 -msgid "Use relative E distances" -msgstr "Use relative E distances" - -#: src/libslic3r/PrintConfig.cpp:2066 -msgid "" -"If your firmware requires relative E values, check this, otherwise leave it " -"unchecked. Most firmwares use absolute values." -msgstr "" -"If your firmware requires relative E values, check this, otherwise leave it " -"unchecked. Most firmwares use absolute values." - -#: src/libslic3r/PrintConfig.cpp:2072 -msgid "Use volumetric E" -msgstr "Use volumetric E" - -#: src/libslic3r/PrintConfig.cpp:2073 -msgid "" -"This experimental setting uses outputs the E values in cubic millimeters " -"instead of linear millimeters. If your firmware doesn't already know " -"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " -"T0' in your start G-code in order to turn volumetric mode on and use the " -"filament diameter associated to the filament selected in Slic3r. This is " -"only supported in recent Marlin." -msgstr "" -"This experimental setting uses outputs the E values in cubic millimeters " -"instead of linear millimeters. If your firmware doesn't already know " -"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " -"T0' in your start G-code in order to turn volumetric mode on and use the " -"filament diameter associated to the filament selected in Slic3r. This is " -"only supported in recent Marlin." - -#: src/libslic3r/PrintConfig.cpp:2083 -msgid "Enable variable layer height feature" -msgstr "Enable variable layer height feature" - -#: src/libslic3r/PrintConfig.cpp:2084 -msgid "" -"Some printers or printer setups may have difficulties printing with a " -"variable layer height. Enabled by default." -msgstr "" -"Some printers or printer setups may have difficulties printing with a " -"variable layer height. Enabled by default." - -#: src/libslic3r/PrintConfig.cpp:2090 -msgid "Wipe while retracting" -msgstr "Wipe while retracting" - -#: src/libslic3r/PrintConfig.cpp:2091 -msgid "" -"This flag will move the nozzle while retracting to minimize the possible " -"blob on leaky extruders." -msgstr "" -"This flag will move the nozzle while retracting to minimize the possible " -"blob on leaky extruders." - -#: src/libslic3r/PrintConfig.cpp:2098 -msgid "" -"Multi material printers may need to prime or purge extruders on tool " -"changes. Extrude the excess material into the wipe tower." -msgstr "" -"Multi material printers may need to prime or purge extruders on tool " -"changes. Extrude the excess material into the wipe tower." - -#: src/libslic3r/PrintConfig.cpp:2104 -msgid "Purging volumes - load/unload volumes" -msgstr "Purging volumes - load/unload volumes" - -#: src/libslic3r/PrintConfig.cpp:2105 -msgid "" -"This vector saves required volumes to change from/to each tool used on the " -"wipe tower. These values are used to simplify creation of the full purging " -"volumes below. " -msgstr "" -"This vector saves required volumes to change from/to each tool used on the " -"wipe tower. These values are used to simplify creation of the full purging " -"volumes below. " - -#: src/libslic3r/PrintConfig.cpp:2111 -msgid "Purging volumes - matrix" -msgstr "Purging volumes - matrix" - -#: src/libslic3r/PrintConfig.cpp:2112 -msgid "" -"This matrix describes volumes (in cubic milimetres) required to purge the " -"new filament on the wipe tower for any given pair of tools. " -msgstr "" -"This matrix describes volumes (in cubic milimetres) required to purge the " -"new filament on the wipe tower for any given pair of tools. " - -#: src/libslic3r/PrintConfig.cpp:2121 -msgid "Position X" -msgstr "Position X" - -#: src/libslic3r/PrintConfig.cpp:2122 -msgid "X coordinate of the left front corner of a wipe tower" -msgstr "X coordinate of the left front corner of a wipe tower" - -#: src/libslic3r/PrintConfig.cpp:2128 -msgid "Position Y" -msgstr "Position Y" - -#: src/libslic3r/PrintConfig.cpp:2129 -msgid "Y coordinate of the left front corner of a wipe tower" -msgstr "Y coordinate of the left front corner of a wipe tower" - -#: src/libslic3r/PrintConfig.cpp:2136 -msgid "Width of a wipe tower" -msgstr "Width of a wipe tower" - -#: src/libslic3r/PrintConfig.cpp:2142 -msgid "Wipe tower rotation angle" -msgstr "Wipe tower rotation angle" - -#: src/libslic3r/PrintConfig.cpp:2143 -msgid "Wipe tower rotation angle with respect to x-axis " -msgstr "Wipe tower rotation angle with respect to x-axis " - -#: src/libslic3r/PrintConfig.cpp:2144 src/libslic3r/PrintConfig.cpp:2565 -msgid "degrees" -msgstr "degrees" - -#: src/libslic3r/PrintConfig.cpp:2150 -msgid "Wipe into this object's infill" -msgstr "Wipe into this object's infill" - -#: src/libslic3r/PrintConfig.cpp:2151 -msgid "" -"Purging after toolchange will done inside this object's infills. This lowers " -"the amount of waste but may result in longer print time due to additional " -"travel moves." -msgstr "" -"Purging after toolchange will done inside this object's infills. This lowers " -"the amount of waste but may result in longer print time due to additional " -"travel moves." - -#: src/libslic3r/PrintConfig.cpp:2158 -msgid "Wipe into this object" -msgstr "Wipe into this object" - -#: src/libslic3r/PrintConfig.cpp:2159 -msgid "" -"Object will be used to purge the nozzle after a toolchange to save material " -"that would otherwise end up in the wipe tower and decrease print time. " -"Colours of the objects will be mixed as a result." -msgstr "" -"Object will be used to purge the nozzle after a toolchange to save material " -"that would otherwise end up in the wipe tower and decrease print time. " -"Colours of the objects will be mixed as a result." - -#: src/libslic3r/PrintConfig.cpp:2165 -msgid "Maximal bridging distance" -msgstr "Maximal bridging distance" - -#: src/libslic3r/PrintConfig.cpp:2166 -msgid "Maximal distance between supports on sparse infill sections. " -msgstr "Maximal distance between supports on sparse infill sections. " - -#: src/libslic3r/PrintConfig.cpp:2172 -msgid "XY Size Compensation" -msgstr "XY Size Compensation" - -#: src/libslic3r/PrintConfig.cpp:2174 -msgid "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning hole sizes." -msgstr "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning hole sizes." - -#: src/libslic3r/PrintConfig.cpp:2182 -msgid "Z offset" -msgstr "Z offset" - -#: src/libslic3r/PrintConfig.cpp:2183 -msgid "" -"This value will be added (or subtracted) from all the Z coordinates in the " -"output G-code. It is used to compensate for bad Z endstop position: for " -"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " -"print bed, set this to -0.3 (or fix your endstop)." -msgstr "" -"This value will be added (or subtracted) from all the Z coordinates in the " -"output G-code. It is used to compensate for bad Z endstop position: for " -"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " -"print bed, set this to -0.3 (or fix your endstop)." - -#: src/libslic3r/PrintConfig.cpp:2200 -msgid "Display width" -msgstr "Display width" - -#: src/libslic3r/PrintConfig.cpp:2201 -msgid "Width of the display" -msgstr "Width of the display" - -#: src/libslic3r/PrintConfig.cpp:2206 -msgid "Display height" -msgstr "Display height" - -#: src/libslic3r/PrintConfig.cpp:2207 -msgid "Height of the display" -msgstr "Height of the display" - -#: src/libslic3r/PrintConfig.cpp:2212 -msgid "Number of pixels in" -msgstr "Number of pixels in" - -#: src/libslic3r/PrintConfig.cpp:2214 -msgid "Number of pixels in X" -msgstr "Number of pixels in X" - -#: src/libslic3r/PrintConfig.cpp:2220 -msgid "Number of pixels in Y" -msgstr "Number of pixels in Y" - -#: src/libslic3r/PrintConfig.cpp:2225 -msgid "Display orientation" -msgstr "Display orientation" - -#: src/libslic3r/PrintConfig.cpp:2226 -msgid "" -"Set the actual LCD display orientation inside the SLA printer. Portrait mode " -"will flip the meaning of display width and height parameters and the output " -"images will be rotated by 90 degrees." -msgstr "" -"Set the actual LCD display orientation inside the SLA printer. Portrait mode " -"will flip the meaning of display width and height parameters and the output " -"images will be rotated by 90 degrees." - -#: src/libslic3r/PrintConfig.cpp:2232 -msgid "Landscape" -msgstr "Landscape" - -#: src/libslic3r/PrintConfig.cpp:2233 -msgid "Portrait" -msgstr "Portrait" - -#: src/libslic3r/PrintConfig.cpp:2238 -msgid "Fast" -msgstr "Fast" - -#: src/libslic3r/PrintConfig.cpp:2239 -msgid "Fast tilt" -msgstr "Fast tilt" - -#: src/libslic3r/PrintConfig.cpp:2240 -msgid "Time of the fast tilt" -msgstr "Time of the fast tilt" - -#: src/libslic3r/PrintConfig.cpp:2247 -msgid "Slow" -msgstr "Slow" - -#: src/libslic3r/PrintConfig.cpp:2248 -msgid "Slow tilt" -msgstr "Slow tilt" - -#: src/libslic3r/PrintConfig.cpp:2249 -msgid "Time of the slow tilt" -msgstr "Time of the slow tilt" - -#: src/libslic3r/PrintConfig.cpp:2256 -msgid "Area fill" -msgstr "Area fill" - -#: src/libslic3r/PrintConfig.cpp:2257 -msgid "" -"The percentage of the bed area. \n" -"If the print area exceeds the specified value, \n" -"then a slow tilt will be used, otherwise - a fast tilt" -msgstr "" -"The percentage of the bed area. \n" -"If the print area exceeds the specified value, \n" -"then a slow tilt will be used, otherwise - a fast tilt" - -#: src/libslic3r/PrintConfig.cpp:2264 src/libslic3r/PrintConfig.cpp:2265 -#: src/libslic3r/PrintConfig.cpp:2266 -msgid "Printer scaling correction" -msgstr "Printer scaling correction" - -#: src/libslic3r/PrintConfig.cpp:2272 src/libslic3r/PrintConfig.cpp:2273 -msgid "Printer absolute correction" -msgstr "Printer absolute correction" - -#: src/libslic3r/PrintConfig.cpp:2274 -msgid "" -"Will inflate or deflate the sliced 2D polygons according to the sign of the " -"correction." -msgstr "" -"Will inflate or deflate the sliced 2D polygons according to the sign of the " -"correction." - -#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2281 -msgid "Printer gamma correction" -msgstr "Printer gamma correction" - -#: src/libslic3r/PrintConfig.cpp:2282 -msgid "This will apply a gamm correction to the rasterized 2D polygons." -msgstr "This will apply a gamm correction to the rasterized 2D polygons." - -#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292 -msgid "Initial layer height" -msgstr "Initial layer height" - -#: src/libslic3r/PrintConfig.cpp:2298 -msgid "Faded layers" -msgstr "Faded layers" - -#: src/libslic3r/PrintConfig.cpp:2299 -msgid "" -"Number of the layers needed for the exposure time fade from initial exposure " -"time to the exposure time" -msgstr "" -"Number of the layers needed for the exposure time fade from initial exposure " -"time to the exposure time" - -#: src/libslic3r/PrintConfig.cpp:2306 src/libslic3r/PrintConfig.cpp:2307 -msgid "Exposure time" -msgstr "Exposure time" - -#: src/libslic3r/PrintConfig.cpp:2313 src/libslic3r/PrintConfig.cpp:2314 -msgid "Initial exposure time" -msgstr "Initial exposure time" - -#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321 -msgid "Correction for expansion" -msgstr "Correction for expansion" - -#: src/libslic3r/PrintConfig.cpp:2327 -msgid "SLA print material notes" -msgstr "SLA print material notes" - -#: src/libslic3r/PrintConfig.cpp:2328 -msgid "You can put your notes regarding the SLA print material here." -msgstr "You can put your notes regarding the SLA print material here." - -#: src/libslic3r/PrintConfig.cpp:2336 src/libslic3r/PrintConfig.cpp:2347 -msgid "Default SLA material profile" -msgstr "Default SLA material profile" - -#: src/libslic3r/PrintConfig.cpp:2358 -msgid "Generate supports" -msgstr "Generate supports" - -#: src/libslic3r/PrintConfig.cpp:2360 -msgid "Generate supports for the models" -msgstr "Generate supports for the models" - -#: src/libslic3r/PrintConfig.cpp:2365 -msgid "Support head front diameter" -msgstr "Support head front diameter" - -#: src/libslic3r/PrintConfig.cpp:2367 -msgid "Diameter of the pointing side of the head" -msgstr "Diameter of the pointing side of the head" - -#: src/libslic3r/PrintConfig.cpp:2374 -msgid "Support head penetration" -msgstr "Support head penetration" - -#: src/libslic3r/PrintConfig.cpp:2376 -msgid "How much the pinhead has to penetrate the model surface" -msgstr "How much the pinhead has to penetrate the model surface" - -#: src/libslic3r/PrintConfig.cpp:2383 -msgid "Support head width" -msgstr "Support head width" - -#: src/libslic3r/PrintConfig.cpp:2385 -msgid "Width from the back sphere center to the front sphere center" -msgstr "Width from the back sphere center to the front sphere center" - -#: src/libslic3r/PrintConfig.cpp:2393 -msgid "Support pillar diameter" -msgstr "Support pillar diameter" - -#: src/libslic3r/PrintConfig.cpp:2395 -msgid "Diameter in mm of the support pillars" -msgstr "Diameter in mm of the support pillars" - -#: src/libslic3r/PrintConfig.cpp:2403 -msgid "Support pillar connection mode" -msgstr "Support pillar connection mode" - -#: src/libslic3r/PrintConfig.cpp:2404 -msgid "" -"Controls the bridge type between two neigboring pillars. Can be zig-zag, " -"cross (double zig-zag) or dynamic which will automatically switch between " -"the first two depending on the distance of the two pillars." -msgstr "" -"Controls the bridge type between two neigboring pillars. Can be zig-zag, " -"cross (double zig-zag) or dynamic which will automatically switch between " -"the first two depending on the distance of the two pillars." - -#: src/libslic3r/PrintConfig.cpp:2412 -msgid "Zig-Zag" -msgstr "Zig-Zag" - -#: src/libslic3r/PrintConfig.cpp:2413 -msgid "Cross" -msgstr "Cross" - -#: src/libslic3r/PrintConfig.cpp:2414 -msgid "Dynamic" -msgstr "Dynamic" - -#: src/libslic3r/PrintConfig.cpp:2426 -msgid "Pillar widening factor" -msgstr "Pillar widening factor" - -#: src/libslic3r/PrintConfig.cpp:2428 -msgid "" -"Merging bridges or pillars into another pillars can increase the radius. " -"Zero means no increase, one means full increase." -msgstr "" -"Merging bridges or pillars into another pillars can increase the radius. " -"Zero means no increase, one means full increase." - -#: src/libslic3r/PrintConfig.cpp:2437 -msgid "Support base diameter" -msgstr "Support base diameter" - -#: src/libslic3r/PrintConfig.cpp:2439 -msgid "Diameter in mm of the pillar base" -msgstr "Diameter in mm of the pillar base" - -#: src/libslic3r/PrintConfig.cpp:2447 -msgid "Support base height" -msgstr "Support base height" - -#: src/libslic3r/PrintConfig.cpp:2449 -msgid "The height of the pillar base cone" -msgstr "The height of the pillar base cone" - -#: src/libslic3r/PrintConfig.cpp:2456 -msgid "Critical angle" -msgstr "Critical angle" - -#: src/libslic3r/PrintConfig.cpp:2458 -msgid "The default angle for connecting support sticks and junctions." -msgstr "The default angle for connecting support sticks and junctions." - -#: src/libslic3r/PrintConfig.cpp:2466 -msgid "Max bridge length" -msgstr "Max bridge length" - -#: src/libslic3r/PrintConfig.cpp:2468 -msgid "The max length of a bridge" -msgstr "The max length of a bridge" - -#: src/libslic3r/PrintConfig.cpp:2475 -msgid "Max pillar linking distance" -msgstr "Max pillar linking distance" - -#: src/libslic3r/PrintConfig.cpp:2477 -msgid "" -"The max distance of two pillars to get linked with each other. A zero value " -"will prohibit pillar cascading." -msgstr "" -"The max distance of two pillars to get linked with each other. A zero value " -"will prohibit pillar cascading." - -#: src/libslic3r/PrintConfig.cpp:2485 -msgid "Object elevation" -msgstr "Object elevation" - -#: src/libslic3r/PrintConfig.cpp:2487 -msgid "How much the supports should lift up the supported object." -msgstr "How much the supports should lift up the supported object." - -#: src/libslic3r/PrintConfig.cpp:2495 -msgid "Support points density" -msgstr "Support points density" - -#: src/libslic3r/PrintConfig.cpp:2497 -msgid "This is a relative measure of support points density." -msgstr "This is a relative measure of support points density." - -#: src/libslic3r/PrintConfig.cpp:2503 -msgid "Minimal distance of the support points" -msgstr "Minimal distance of the support points" - -#: src/libslic3r/PrintConfig.cpp:2505 -msgid "No support points will be placed closer than this threshold." -msgstr "No support points will be placed closer than this threshold." - -#: src/libslic3r/PrintConfig.cpp:2511 -msgid "Use pad" -msgstr "Use pad" - -#: src/libslic3r/PrintConfig.cpp:2513 -msgid "Add a pad underneath the supported model" -msgstr "Add a pad underneath the supported model" - -#: src/libslic3r/PrintConfig.cpp:2518 -msgid "Pad wall thickness" -msgstr "Pad wall thickness" - -#: src/libslic3r/PrintConfig.cpp:2520 -msgid "The thickness of the pad and its optional cavity walls." -msgstr "The thickness of the pad and its optional cavity walls." - -#: src/libslic3r/PrintConfig.cpp:2528 -msgid "Pad wall height" -msgstr "Pad wall height" - -#: src/libslic3r/PrintConfig.cpp:2529 -msgid "Defines the cavity depth. Set to zero to disable the cavity." -msgstr "Defines the cavity depth. Set to zero to disable the cavity." - -#: src/libslic3r/PrintConfig.cpp:2539 -msgid "Max merge distance" -msgstr "Max merge distance" - -#: src/libslic3r/PrintConfig.cpp:2541 -msgid "" -"Some objects can get along with a few smaller pads instead of a single big " -"one. This parameter defines how far the center of two smaller pads should " -"be. If theyare closer, they will get merged into one pad." -msgstr "" -"Some objects can get along with a few smaller pads instead of a single big " -"one. This parameter defines how far the center of two smaller pads should " -"be. If theyare closer, they will get merged into one pad." - -#: src/libslic3r/PrintConfig.cpp:2552 -msgid "Pad edge radius" -msgstr "Pad edge radius" - -#: src/libslic3r/PrintConfig.cpp:2561 -msgid "Pad wall slope" -msgstr "Pad wall slope" - -#: src/libslic3r/PrintConfig.cpp:2563 -msgid "" -"The slope of the pad wall relative to the bed plane. 90 degrees means " -"straight walls." -msgstr "" -"The slope of the pad wall relative to the bed plane. 90 degrees means " -"straight walls." - -#: src/libslic3r/PrintConfig.cpp:2924 -msgid "Export SVG" -msgstr "Export SVG" - -#: src/libslic3r/PrintConfig.cpp:2925 -msgid "Export the model(s) as OBJ." -msgstr "Export the model(s) as OBJ." - -#: src/libslic3r/PrintConfig.cpp:2936 -msgid "Export SLA" -msgstr "Export SLA" - -#: src/libslic3r/PrintConfig.cpp:2937 -msgid "Slice the model and export SLA printing layers as PNG." -msgstr "Slice the model and export SLA printing layers as PNG." - -#: src/libslic3r/PrintConfig.cpp:2942 -msgid "Export 3MF" -msgstr "Export 3MF" - -#: src/libslic3r/PrintConfig.cpp:2943 -msgid "Export the model(s) as 3MF." -msgstr "Export the model(s) as 3MF." - -#: src/libslic3r/PrintConfig.cpp:2947 -msgid "Export AMF" -msgstr "Export AMF" - -#: src/libslic3r/PrintConfig.cpp:2948 -msgid "Export the model(s) as AMF." -msgstr "Export the model(s) as AMF." - -#: src/libslic3r/PrintConfig.cpp:2952 -msgid "Export STL" -msgstr "Export STL" - -#: src/libslic3r/PrintConfig.cpp:2953 -msgid "Export the model(s) as STL." -msgstr "Export the model(s) as STL." - -#: src/libslic3r/PrintConfig.cpp:2958 -msgid "Slice the model and export toolpaths as G-code." -msgstr "Slice the model and export toolpaths as G-code." - -#: src/libslic3r/PrintConfig.cpp:2963 -msgid "Slice" -msgstr "Slice" - -#: src/libslic3r/PrintConfig.cpp:2964 -msgid "" -"Slice the model as FFF or SLA based on the printer_technology configuration " -"value." -msgstr "" -"Slice the model as FFF or SLA based on the printer_technology configuration " -"value." - -#: src/libslic3r/PrintConfig.cpp:2969 -msgid "Help" -msgstr "Help" - -#: src/libslic3r/PrintConfig.cpp:2970 -msgid "Show this help." -msgstr "Show this help." - -#: src/libslic3r/PrintConfig.cpp:2975 -msgid "Help (FFF options)" -msgstr "Help (FFF options)" - -#: src/libslic3r/PrintConfig.cpp:2976 -msgid "Show the full list of print/G-code configuration options." -msgstr "Show the full list of print/G-code configuration options." - -#: src/libslic3r/PrintConfig.cpp:2980 -msgid "Help (SLA options)" -msgstr "Help (SLA options)" - -#: src/libslic3r/PrintConfig.cpp:2981 -msgid "Show the full list of SLA print configuration options." -msgstr "Show the full list of SLA print configuration options." - -#: src/libslic3r/PrintConfig.cpp:2985 -msgid "Output Model Info" -msgstr "Output Model Info" - -#: src/libslic3r/PrintConfig.cpp:2986 -msgid "Write information about the model to the console." -msgstr "Write information about the model to the console." - -#: src/libslic3r/PrintConfig.cpp:2990 -msgid "Save config file" -msgstr "Save config file" - -#: src/libslic3r/PrintConfig.cpp:2991 -msgid "Save configuration to the specified file." -msgstr "Save configuration to the specified file." - -#: src/libslic3r/PrintConfig.cpp:3001 -msgid "Align XY" -msgstr "Align XY" - -#: src/libslic3r/PrintConfig.cpp:3002 -msgid "Align the model to the given point." -msgstr "Align the model to the given point." - -#: src/libslic3r/PrintConfig.cpp:3007 -msgid "Cut model at the given Z." -msgstr "Cut model at the given Z." - -#: src/libslic3r/PrintConfig.cpp:3028 -msgid "Center" -msgstr "Center" - -#: src/libslic3r/PrintConfig.cpp:3029 -msgid "Center the print around the given center." -msgstr "Center the print around the given center." - -#: src/libslic3r/PrintConfig.cpp:3033 -msgid "Don't arrange" -msgstr "Don't arrange" - -#: src/libslic3r/PrintConfig.cpp:3034 -msgid "" -"Do not rearrange the given models before merging and keep their original XY " -"coordinates." -msgstr "" -"Do not rearrange the given models before merging and keep their original XY " -"coordinates." - -#: src/libslic3r/PrintConfig.cpp:3037 -msgid "Duplicate" -msgstr "Duplicate" - -#: src/libslic3r/PrintConfig.cpp:3038 -msgid "Multiply copies by this factor." -msgstr "Multiply copies by this factor." - -#: src/libslic3r/PrintConfig.cpp:3042 -msgid "Duplicate by grid" -msgstr "Duplicate by grid" - -#: src/libslic3r/PrintConfig.cpp:3043 -msgid "Multiply copies by creating a grid." -msgstr "Multiply copies by creating a grid." - -#: src/libslic3r/PrintConfig.cpp:3046 -msgid "Merge" -msgstr "Merge" - -#: src/libslic3r/PrintConfig.cpp:3047 -msgid "" -"Arrange the supplied models in a plate and merge them in a single model in " -"order to perform actions once." -msgstr "" -"Arrange the supplied models in a plate and merge them in a single model in " -"order to perform actions once." - -#: src/libslic3r/PrintConfig.cpp:3052 -msgid "" -"Try to repair any non-manifold meshes (this option is implicitly added " -"whenever we need to slice the model to perform the requested action)." -msgstr "" -"Try to repair any non-manifold meshes (this option is implicitly added " -"whenever we need to slice the model to perform the requested action)." - -#: src/libslic3r/PrintConfig.cpp:3056 -msgid "Rotation angle around the Z axis in degrees." -msgstr "Rotation angle around the Z axis in degrees." - -#: src/libslic3r/PrintConfig.cpp:3060 -msgid "Rotate around X" -msgstr "Rotate around X" - -#: src/libslic3r/PrintConfig.cpp:3061 -msgid "Rotation angle around the X axis in degrees." -msgstr "Rotation angle around the X axis in degrees." - -#: src/libslic3r/PrintConfig.cpp:3065 -msgid "Rotate around Y" -msgstr "Rotate around Y" - -#: src/libslic3r/PrintConfig.cpp:3066 -msgid "Rotation angle around the Y axis in degrees." -msgstr "Rotation angle around the Y axis in degrees." - -#: src/libslic3r/PrintConfig.cpp:3071 -msgid "Scaling factor or percentage." -msgstr "Scaling factor or percentage." - -#: src/libslic3r/PrintConfig.cpp:3076 -msgid "" -"Detect unconnected parts in the given model(s) and split them into separate " -"objects." -msgstr "" -"Detect unconnected parts in the given model(s) and split them into separate " -"objects." - -#: src/libslic3r/PrintConfig.cpp:3079 -msgid "Scale to Fit" -msgstr "Scale to Fit" - -#: src/libslic3r/PrintConfig.cpp:3080 -msgid "Scale to fit the given volume." -msgstr "Scale to fit the given volume." - -#: src/libslic3r/PrintConfig.cpp:3089 -msgid "Ignore non-existent config files" -msgstr "Ignore non-existent config files" - -#: src/libslic3r/PrintConfig.cpp:3090 -msgid "Do not fail if a file supplied to --load does not exist." -msgstr "Do not fail if a file supplied to --load does not exist." - -#: src/libslic3r/PrintConfig.cpp:3093 -msgid "Load config file" -msgstr "Load config file" - -#: src/libslic3r/PrintConfig.cpp:3094 -msgid "" -"Load configuration from the specified file. It can be used more than once to " -"load options from multiple files." -msgstr "" -"Load configuration from the specified file. It can be used more than once to " -"load options from multiple files." - -#: src/libslic3r/PrintConfig.cpp:3097 -msgid "Output File" -msgstr "Output File" - -#: src/libslic3r/PrintConfig.cpp:3098 -msgid "" -"The file where the output will be written (if not specified, it will be " -"based on the input file)." -msgstr "" -"The file where the output will be written (if not specified, it will be " -"based on the input file)." - -#: src/libslic3r/PrintConfig.cpp:3108 -msgid "Data directory" -msgstr "Data directory" - -#: src/libslic3r/PrintConfig.cpp:3109 -msgid "" -"Load and store settings at the given directory. This is useful for " -"maintaining different profiles or including configurations from a network " -"storage." -msgstr "" -"Load and store settings at the given directory. This is useful for " -"maintaining different profiles or including configurations from a network " -"storage." - -#: src/libslic3r/PrintConfig.cpp:3112 -msgid "Logging level" -msgstr "Logging level" - -#: src/libslic3r/PrintConfig.cpp:3113 -msgid "" -"Messages with severity lower or eqal to the loglevel will be printed out. 0:" -"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal" -msgstr "" -"Messages with severity lower or eqal to the loglevel will be printed out. 0:" -"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal" - -#: src/libslic3r/GCode/PreviewData.cpp:176 -msgid "Mixed" -msgstr "Mixed" - -#: src/libslic3r/GCode/PreviewData.cpp:396 -msgid "Height (mm)" -msgstr "Height (mm)" - -#: src/libslic3r/GCode/PreviewData.cpp:398 -msgid "Width (mm)" -msgstr "Width (mm)" - -#: src/libslic3r/GCode/PreviewData.cpp:400 -msgid "Speed (mm/s)" -msgstr "Speed (mm/s)" - -#: src/libslic3r/GCode/PreviewData.cpp:402 -msgid "Volumetric flow rate (mm3/s)" -msgstr "Volumetric flow rate (mm3/s)" - -#: src/libslic3r/GCode/PreviewData.cpp:491 -msgid "Default print color" -msgstr "Default print color" - -#: src/libslic3r/GCode/PreviewData.cpp:495 -#, c-format -msgid "up to %.2f mm" -msgstr "up to %.2f mm" - -#: src/libslic3r/GCode/PreviewData.cpp:499 -#, c-format -msgid "above %.2f mm" -msgstr "above %.2f mm" - -#: src/libslic3r/GCode/PreviewData.cpp:504 -#, c-format -msgid "%.2f - %.2f mm" -msgstr "%.2f - %.2f mm" diff --git a/resources/localization/fr_FR/PrusaSlicer.mo b/resources/localization/fr/PrusaSlicer.mo similarity index 100% rename from resources/localization/fr_FR/PrusaSlicer.mo rename to resources/localization/fr/PrusaSlicer.mo diff --git a/resources/localization/fr_FR/PrusaSlicer_fr.po b/resources/localization/fr/PrusaSlicer_fr.po similarity index 100% rename from resources/localization/fr_FR/PrusaSlicer_fr.po rename to resources/localization/fr/PrusaSlicer_fr.po diff --git a/resources/localization/ko_KR/PrusaSlicer.mo b/resources/localization/ko/PrusaSlicer.mo similarity index 100% rename from resources/localization/ko_KR/PrusaSlicer.mo rename to resources/localization/ko/PrusaSlicer.mo diff --git a/resources/localization/ko_KR/PrusaSlicer_kr.po b/resources/localization/ko/PrusaSlicer_ko_KR.po similarity index 100% rename from resources/localization/ko_KR/PrusaSlicer_kr.po rename to resources/localization/ko/PrusaSlicer_ko_KR.po diff --git a/resources/localization/zh_CN/PrusaSlicer.mo b/resources/localization/zh/PrusaSlicer.mo similarity index 100% rename from resources/localization/zh_CN/PrusaSlicer.mo rename to resources/localization/zh/PrusaSlicer.mo diff --git a/resources/localization/zh_CN/PrusaSlicer_zh.po b/resources/localization/zh/PrusaSlicer_zh_CN.po similarity index 100% rename from resources/localization/zh_CN/PrusaSlicer_zh.po rename to resources/localization/zh/PrusaSlicer_zh_CN.po diff --git a/resources/localization/zh_tw/PrusaSlicer_zhtw.po b/resources/localization/zh_tw/PrusaSlicer_zh_TW.po similarity index 100% rename from resources/localization/zh_tw/PrusaSlicer_zhtw.po rename to resources/localization/zh_tw/PrusaSlicer_zh_TW.po