3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

rename avoid_curled_filament_during_travels to avoid_crossing_curled_overhangs

Browse source 
mark avoid_crossing_curled_overhangs as Experimental
rename overhang_steepness_levels to overhang_overlap_levels
This commit is contained in:
Pavel Mikus 2023-01-02 14:28:27 +01:00 • committed by Pavel Mikuš
parent dbaa0f72d1
commit cfb702be99
10 changed files with 37 additions and 32 deletions
Download patch file Download diff file Expand all files Collapse all files

23
src/libslic3r/PrintConfig.cpp
View file

@ -400,10 +400,10 @@ void PrintConfigDef::init_fff_params()
// Maximum extruder temperature, bumped to 1500 to support printing of glass.
const int max_temp = 1500;
def = this->add("avoid_curled_filament_during_travels", coBool);
def->label = L("Avoid curled filament during travels");
def->tooltip = L("Plan travel moves such that the extruder avoids areas where filament may be curled up. "
"This is mostly happening on steeper rounded overhangs and may cause crash or borken print. "
def = this->add("avoid_crossing_curled_overhangs", coBool);
def->label = L("Avoid crossing curled overhangs (Experimental)");
def->tooltip = L("Plan travel moves such that the extruder avoids areas where the filament may be curled up. "
"This is mostly happening on steeper rounded overhangs and may cause a crash with the nozzle. "
"This feature slows down both the print and the G-code generation.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(false));
@ -536,11 +536,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("overhang_steepness_levels", coPercents);
def->full_label = L("Steepness levels of overhangs");
def = this->add("overhang_overlap_levels", coPercents);
def->full_label = L("Overhang overlap levels");
def->category = L("Speed");
def->tooltip = L("Controls overhang steepness, expressed as percentage of overlap of the extrusion with the previous layer. "
"Each overhang level then corresponds with the overhang speed below.");
def->tooltip = L("Controls overhang levels, expressed as a percentage of overlap of the extrusion with the previous layer - "
"100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion). "
"Each overhang level then corresponds with the overhang speed below. Speeds for overhang levels in between are "
"calculated via linear interpolation."
"If you set multiple different speeds for the same overhang level, only the largest speed is used. "
);
def->sidetext = L("%");
def->min = 0;
def->max = 100;
@ -550,7 +554,8 @@ void PrintConfigDef::init_fff_params()
def = this->add("dynamic_overhang_speeds", coFloatsOrPercents);
def->full_label = L("Dynamic speed on overhangs");
def->category = L("Speed");
def->tooltip = L("This setting controls the speed on the overhang with steepness value above. "
def->tooltip = L("This setting controls the speed on the overhang with the overlap value set above. "
"The speed of the extrusion is calculated as a linear interpolation of the speeds for higher and lower overlap. "
"If set as percentage, the speed is calculated over the external perimeter speed."
);
def->sidetext = L("mm/s or %");