3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Revert of 7b4c98d727, clamp toolpaths widths increased to 2mm and added default values for toolpaths width and height

Browse source
This commit is contained in:
enricoturri1966 2021-09-07 09:41:14 +02:00
parent 0bc77cef3e
commit d35183921b
2 changed files with 13 additions and 22 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
src/libslic3r/GCode/GCodeProcessor.cpp
View file

@ -21,6 +21,9 @@
#include <chrono>
static const float DEFAULT_TOOLPATH_WIDTH = 0.4f;
static const float DEFAULT_TOOLPATH_HEIGHT = 0.2f;
static const float INCHES_TO_MM = 25.4f;
static const float MMMIN_TO_MMSEC = 1.0f / 60.0f;
static const float DEFAULT_ACCELERATION = 1500.0f; // Prusa Firmware 1_75mm_MK2
@ -2217,9 +2220,6 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
return;
EMoveType type = move_type(delta_pos);
if (type == EMoveType::Extrude && m_end_position[Z] == 0.0f)
type = EMoveType::Travel;
if (type == EMoveType::Extrude) {
float delta_xyz = std::sqrt(sqr(delta_pos[X]) + sqr(delta_pos[Y]) + sqr(delta_pos[Z]));
float volume_extruded_filament = area_filament_cross_section * delta_pos[E];
@ -2243,6 +2243,12 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
}
}
if (m_height == 0.0f)
m_height = DEFAULT_TOOLPATH_HEIGHT;
if (m_end_position[Z] == 0.0f)
m_end_position[Z] = m_height;
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
m_height_compare.update(m_height, m_extrusion_role);
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
@ -2259,23 +2265,17 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
// cross section: rectangle + 2 semicircles
m_width = delta_pos[E] * static_cast<float>(M_PI * sqr(filament_radius)) / (delta_xyz * m_height) + static_cast<float>(1.0 - 0.25 * M_PI) * m_height;
#if ENABLE_CLAMP_TOOLPATHS_WIDTH
if (m_producers_enabled && m_producer != EProducer::PrusaSlicer)
// clamp width to avoid artifacts which may arise from wrong values of m_height
m_width = std::min(m_width, std::max(1.0f, 4.0f * m_height));
#else
if (m_width == 0.0f)
m_width = DEFAULT_TOOLPATH_WIDTH;
// clamp width to avoid artifacts which may arise from wrong values of m_height
m_width = std::min(m_width, std::max(1.0f, 4.0f * m_height));
#endif // ENABLE_CLAMP_TOOLPATHS_WIDTH
m_width = std::min(m_width, std::max(2.0f, 4.0f * m_height));
#if ENABLE_GCODE_VIEWER_DATA_CHECKING
m_width_compare.update(m_width, m_extrusion_role);
#endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
}
if (type == EMoveType::Extrude && (m_width == 0.0f || m_height == 0.0f))
type = EMoveType::Travel;
// time estimate section
auto move_length = [](const AxisCoords& delta_pos) {
float sq_xyz_length = sqr(delta_pos[X]) + sqr(delta_pos[Y]) + sqr(delta_pos[Z]);

9
src/libslic3r/Technologies.hpp
View file

@ -57,13 +57,4 @@
#define ENABLE_SAVE_COMMANDS_ALWAYS_ENABLED (1 && ENABLE_2_4_0_ALPHA0)
//====================
// 2.4.0.alpha2 techs
//====================
#define ENABLE_2_4_0_ALPHA2 1
// Enable clamping toolpaths width only for gcodes files produced by 3rd part softwares
#define ENABLE_CLAMP_TOOLPATHS_WIDTH (1 && ENABLE_2_4_0_ALPHA2)
#endif // _prusaslicer_technologies_h_