diff --git a/CMakeLists.txt b/CMakeLists.txt
index 8557ab0d7..a01bb7364 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -485,21 +485,28 @@ add_custom_target(gettext_make_pot
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
     COMMENT "Generate pot file from strings in the source tree"
 )
-add_custom_target(gettext_merge_po_with_pot
+
+add_custom_target(gettext_merge_community_po_with_pot
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
-    COMMENT "Merge localization po with new generted pot file"
+    COMMENT "Merge community po with new generated pot file"
 )
 file(GLOB L10N_PO_FILES "${L10N_DIR}/*/PrusaSlicer*.po")
+# list of names of directories, which are licalized by PS internally
+list(APPEND PS_L10N_DIRS "cs" "de" "es" "fr" "it" "ja" "pl")
 foreach(po_file ${L10N_PO_FILES})
-    #GET_FILENAME_COMPONENT(po_dir "${po_file}" DIRECTORY)
-    #SET(po_new_file "${po_dir}/PrusaSlicer_.po")
-    add_custom_command(
-        TARGET gettext_merge_po_with_pot PRE_BUILD
-        COMMAND msgmerge -N -o ${po_file} ${po_file} "${L10N_DIR}/PrusaSlicer.pot"
-        # delete obsolete lines from resulting PO to avoid conflicts after a merging of it with wxWidgets.po
-        COMMAND msgattrib --no-obsolete -o ${po_file} ${po_file}
-        DEPENDS ${po_file}
-    )
+    GET_FILENAME_COMPONENT(po_dir "${po_file}" DIRECTORY)
+    GET_FILENAME_COMPONENT(po_dir_name "${po_dir}" NAME)
+    list(FIND PS_L10N_DIRS ${po_dir_name} found_dir_id)
+    # found_dir_id==-1 means that po_dir_name wasn't found in PS_L10N_DIRS
+    if(found_dir_id LESS 0)
+        add_custom_command(
+            TARGET gettext_merge_community_po_with_pot PRE_BUILD
+            COMMAND msgmerge -N -o ${po_file} ${po_file} "${L10N_DIR}/PrusaSlicer.pot"
+            # delete obsolete lines from resulting PO to avoid conflicts after a merging of it with wxWidgets.po
+            COMMAND msgattrib --no-obsolete -o ${po_file} ${po_file}
+            DEPENDS ${po_file}
+        )
+    endif()
 endforeach()
 
 add_custom_target(gettext_concat_wx_po_with_po
@@ -507,7 +514,6 @@ add_custom_target(gettext_concat_wx_po_with_po
     COMMENT "Concatenate and merge wxWidgets localization po with PrusaSlicer po file"
 )
 file(GLOB L10N_PO_FILES "${L10N_DIR}/*/PrusaSlicer*.po")
-file(GLOB L10N_WX_PO_FILES "${L10N_DIR}/*/PrusaSlicer*.po")
 foreach(po_file ${L10N_PO_FILES})
     GET_FILENAME_COMPONENT(po_dir "${po_file}" DIRECTORY)
     GET_FILENAME_COMPONENT(po_dir_name "${po_dir}" NAME)
diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
index 3034b5aeb..ded7a9515 100644
--- a/resources/localization/PrusaSlicer.pot
+++ b/resources/localization/PrusaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -548,7 +548,7 @@ msgstr ""
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr ""
 
@@ -556,17 +556,17 @@ msgstr ""
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr ""
 
@@ -625,7 +625,7 @@ msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr ""
 
@@ -710,7 +710,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr ""
 
@@ -789,7 +789,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1075,7 +1075,7 @@ msgstr ""
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr ""
 
@@ -1139,7 +1139,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1582,8 +1582,8 @@ msgid "parameter name"
 msgstr ""
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr ""
 
@@ -1771,7 +1771,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr ""
 
@@ -1973,7 +1973,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr ""
 
@@ -2242,7 +2242,7 @@ msgid "Add..."
 msgstr ""
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr ""
 
@@ -3118,25 +3118,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, possible-boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, possible-boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3148,7 +3148,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, possible-boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3157,19 +3157,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3179,53 +3179,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, possible-c-format, possible-boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, possible-boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, possible-boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, possible-boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3238,291 +3238,291 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, possible-boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, possible-boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, possible-c-format, possible-boost-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, possible-c-format, possible-boost-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, possible-boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, possible-boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3628,7 +3628,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3638,7 +3638,7 @@ msgid "Advanced"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3652,8 +3652,8 @@ msgid "Supports"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3663,8 +3663,8 @@ msgstr ""
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3767,7 +3767,7 @@ msgstr ""
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3793,19 +3793,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4066,7 +4066,7 @@ msgstr ""
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4485,7 +4485,7 @@ msgstr ""
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, possible-c-format, possible-boost-format
 msgid "Change Option %s"
 msgstr ""
@@ -4604,18 +4604,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4775,11 +4775,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr ""
 
@@ -4820,11 +4820,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr ""
 
@@ -5205,7 +5205,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr ""
@@ -5317,29 +5317,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5849,7 +5849,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -5958,9 +5958,9 @@ msgstr ""
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr ""
 
@@ -6221,7 +6221,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6247,8 +6247,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr ""
 
@@ -6504,12 +6504,12 @@ msgstr ""
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr ""
 
@@ -6616,7 +6616,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr ""
 
@@ -6624,7 +6624,7 @@ msgstr ""
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6634,12 +6634,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, possible-boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, possible-c-format, possible-boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6650,11 +6650,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, possible-c-format, possible-boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6667,15 +6667,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, possible-c-format, possible-boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6688,180 +6688,180 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, possible-c-format, possible-boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, possible-boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6869,171 +6869,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, possible-c-format, possible-boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, possible-c-format, possible-boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr ""
 
@@ -7150,7 +7150,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7164,7 +7164,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7175,7 +7175,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7678,11 +7678,11 @@ msgstr ""
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7691,18 +7691,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr ""
@@ -8138,7 +8138,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr ""
 
@@ -8222,11 +8222,11 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr ""
 
@@ -8238,11 +8238,11 @@ msgstr ""
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr ""
 
@@ -8250,19 +8250,20 @@ msgstr ""
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr ""
 
@@ -8337,7 +8338,7 @@ msgid "Ramming settings"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr ""
@@ -8375,8 +8376,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr ""
 
@@ -8441,11 +8442,11 @@ msgstr ""
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr ""
 
@@ -8600,69 +8601,73 @@ msgstr ""
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8670,23 +8675,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8694,13 +8699,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8708,17 +8713,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8726,253 +8731,254 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, possible-boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
-msgid ""
-"You will not be asked about the unsaved changes in presets the next time you "
-"create new project"
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
-"switch a preset"
+"create new project"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
+"You will not be asked about the unsaved changes in presets the next time you "
+"switch a preset"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
+msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
 "- Closing PrusaSlicer while some presets are modified,\n"
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, possible-boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, possible-boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, possible-boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, possible-boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, possible-boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, possible-boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, possible-boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9734,115 +9740,115 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, possible-boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, possible-boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -9850,13 +9856,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -9864,27 +9870,46 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr ""
 
diff --git a/resources/localization/ca/PrusaSlicer_ca.po b/resources/localization/ca/PrusaSlicer_ca.po
index 5248ef55b..b4f99487b 100644
--- a/resources/localization/ca/PrusaSlicer_ca.po
+++ b/resources/localization/ca/PrusaSlicer_ca.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-12-16 18:50+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -611,7 +611,7 @@ msgstr "Actiu"
 msgid "PrusaSlicer version"
 msgstr "Versió de PrusaSlicer"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "imprimir"
 
@@ -619,17 +619,17 @@ msgstr "imprimir"
 msgid "filaments"
 msgstr "filaments"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "Impressió SLA"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "Material SLA"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "impressora"
 
@@ -688,7 +688,7 @@ msgstr "Estàndard"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Tots"
 
@@ -780,7 +780,7 @@ msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 "Totes les impressores instal·lades són compatibles amb el %1% seleccionat."
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "filament"
 
@@ -875,7 +875,7 @@ msgstr ""
 "actualització."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Recarregar des del disc"
 
@@ -1194,7 +1194,7 @@ msgstr "&Acabar"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Cancel·lar"
 
@@ -1265,7 +1265,7 @@ msgstr ""
 "d'escriptori de PrusaSlicer probablement s'ha pogut crear amb èxit."
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr "Integració a l'escriptori"
 
@@ -1754,8 +1754,8 @@ msgid "parameter name"
 msgstr "nom del paràmetre"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1963,7 +1963,7 @@ msgstr "Afegir a la base"
 msgid "Add selected shape(s) to the bed"
 msgstr "Afegir la(es) forma(es) seleccionada(es) a la base"
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Afegir"
 
@@ -2169,7 +2169,7 @@ msgid "Wipe"
 msgstr "Netejar"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Opcions"
 
@@ -2438,7 +2438,7 @@ msgid "Add..."
 msgstr "Afegir..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Eliminar tot"
 
@@ -3369,7 +3369,7 @@ msgstr "Error crític"
 msgid "Internal error: %1%"
 msgstr "Error intern: %1%"
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3379,7 +3379,7 @@ msgstr ""
 "està danyat. Intenta eliminar manualment el fitxer per recuperar-se de "
 "l'error. Els vostres perfils d'usuari no es veuran afectats."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3388,12 +3388,12 @@ msgstr ""
 "probablement estigui danyat. Intenta eliminar manualment el fitxer per "
 "recuperar-se de l'error."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr "Estàs obrint %1% versió %2%."
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3412,7 +3412,7 @@ msgstr ""
 "Si és així, es farà una còpia de seguretat de la configuració activa abans "
 "d'importar la nova configuració."
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3425,19 +3425,19 @@ msgstr ""
 "\n"
 "S'ha d'importar aquesta configuració?"
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr "Importar"
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr "No importar"
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr "Voleu continuar i instal·lar les actualitzacions de configuració?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3453,7 +3453,7 @@ msgstr ""
 "de https://www.prusa3d.cz/prusaslicer/.\n"
 "Voleu continuar?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3462,46 +3462,46 @@ msgstr ""
 "%s\n"
 "Voleu continuar?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Recorda la meva elecció"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "S'està carregant la configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr "Hi ha disponible una nova versió %1%."
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr "Veure pàgina de Descàrregues."
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr "La nova versió prellançament %1% està disponible."
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Consulteu pàgina de llançaments."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "Preparant pestanyes de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3514,24 +3514,24 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "Teniu els paràmetres preestablerts següents amb opcions desades per a "
 "\"Pujada del host d'impressió\""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3541,7 +3541,7 @@ msgstr ""
 "informació als paràmetres d'impressora.\n"
 "Els paràmetres es mostraran a la configuració d'impressora física."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3552,139 +3552,139 @@ msgstr ""
 "Nota: Aquest nom es pot canviar posteriorment als paràmetres d'impressora "
 "física"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Informació"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Recreant"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Carregant els paràmetres actuals"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "S'està carregant mode visualització"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Trieu un fitxer (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Trieu un o més fitxers (STL / OBJ / AMF / 3MF / PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Trieu un fitxer (GCODE/. GCO/. G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Canvi d'idioma d'una aplicació"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Seleccioneu l'idioma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Idioma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "modificat"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "Executar %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "Instantànies de &Configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Inspeccionar / activar instantànies de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "&Prendre una Instanània de Configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Captura una instantània de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr "Comprova si hi ha actualitzacions de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Comprova si hi ha actualitzacions de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&Preferències"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Preferències de l'aplicació"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Simple"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Mode de visualització simple"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Mode Avançat"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Mode de visualització avançada"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Expert"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Mode de visualització expert"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Mode"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s Tipus de vista"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "&Idioma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr "Grava el &firmware a la impressora"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 "Carregar una imatge de microprogramari a una impressora basada en Arduino"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr "Prenent una instantània de la configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
@@ -3692,32 +3692,32 @@ msgstr ""
 "Alguns paràmetres estan modificats i els canvis no desats no seran capturats "
 "per la instantània de configuració."
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Nom de la instantània"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr "S'està carregant una instantània de configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr "Continuar activant una instantània de configuració %1%?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "No s'ha pogut activar la instantània de configuració."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr "Reiniciar l'aplicació"
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Selecció d'idiomes"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3725,88 +3725,88 @@ msgstr ""
 "Canviar l'idioma requereix reiniciar l'aplicació.\n"
 "Perdràs tot el contingut situat a la base."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Voleu continuar?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&Configuració"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] "Les modificacions del paràmetre s'han desat correctament"
 msgstr[1] "Les modificacions dels paràmetres s'han desat correctament"
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr "En cas d'un nou projecte, totes les modificacions es restabliran"
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 "S'està carregant un projecte nou mentre es modifica el projecte actual."
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr "El projecte s'està carregant"
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr "Obre un nou projecte mentre alguns paràmetres estan sense desar."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "Les pujades encara estan en curs"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Aturar-les i continuar igualment?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Càrregues en curs"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "És impossible imprimir objectes de diverses peces amb tecnologia SLA."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 "Comproveu la llista d'objectes abans de canviar els paràmetres inicials."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr "La configuració s'edita des de ConfigWizard"
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Seleccioneu un fitxer gcode:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr "Obrir l'hiperenllaç al navegador per defecte?"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr "PrusaSlicer: Obrir hipervincle"
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "Suprimir per obrir hiperenllaç al navegador"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr "PrusaSlicer recordarà la vostra elecció."
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -3815,8 +3815,8 @@ msgstr ""
 "Visiteu \"Preferències\" i comproveu \"%1%\"\n"
 "per canviar la teva elecció."
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: No em tornis a preguntar"
 
@@ -3922,7 +3922,7 @@ msgstr "Faldilla i bassa"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3932,7 +3932,7 @@ msgid "Advanced"
 msgstr "Avançat"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3946,8 +3946,8 @@ msgid "Supports"
 msgstr "Suports"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3957,8 +3957,8 @@ msgstr "Suports"
 msgid "Pad"
 msgstr "Pad"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -4061,7 +4061,7 @@ msgstr "Exporta com a STL"
 msgid "Reload the selected volumes from disk"
 msgstr "Torna a carregar els volums seleccionats des del disc"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr "Substitueix per STL"
 
@@ -4087,19 +4087,19 @@ msgstr "Escalar al volum d'impressió"
 msgid "Scale the selected object to fit the print volume"
 msgstr "Escala els objectes seleccionats per ajustar-se al volum d'impressió"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Convertir des d'unitats imperials"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Reverteix la conversió des de les unitats imperials"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr "Converteix des de metres"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr "Reverteix la conversió des de metres"
 
@@ -4365,7 +4365,7 @@ msgstr "Carregar Modificador"
 msgid "Loading"
 msgstr "Carregant"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "S'està carregant el fitxer"
 
@@ -4807,7 +4807,7 @@ msgstr "Suprimeix el paràmetre"
 msgid "Delete Option %s"
 msgstr "Suprimeix l'opció %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "Canvia l'opció %s"
@@ -4926,18 +4926,18 @@ msgstr "Marcador d'eina"
 msgid "Legend/Estimated printing time"
 msgstr "Llegenda/Temps d'impressió estimat"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Més"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr "Obrir preferències."
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr "Obre la Documentació al navegador web."
 
@@ -5106,11 +5106,11 @@ msgstr ""
 "El fitxer SLA importat no contenia cap preajustament. Els preajustaments "
 "actuals de SLA s'han utilitzat com a reserva."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr "No pots carregar un projecte SLA amb diverses peces a la base"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Atenció!"
 
@@ -5151,11 +5151,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "Carregar Configuració des de ini/amf/3mf/gcode i combina"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "Exportar el codi G"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "Envia el codi G"
 
@@ -5548,7 +5548,7 @@ msgstr "Mostrar/Ocultar Llegenda i Temps d'impressió estimat"
 msgid "Show/Hide G-code window"
 msgstr "Mostrar/Ocultar finestra de codi G"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Previsualització"
@@ -5666,29 +5666,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr "Tancant PrusaSlicer mentre es modifiquen alguns paràmetres."
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Configuració d'Impressió"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Configuració del Material"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Configuració del Filament"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Configuració de la Impressora"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr "Sense títol"
 
@@ -6205,7 +6205,7 @@ msgid "Open New Instance"
 msgstr "Obre una instància nova"
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr "Compara els predefinits"
 
@@ -6314,9 +6314,9 @@ msgstr "Codi G"
 msgid "Save zip file as:"
 msgstr "Desa el fitxer zip com a:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Laminant"
 
@@ -6584,7 +6584,7 @@ msgstr "ERROR:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "AVÍS:"
 
@@ -6610,8 +6610,8 @@ msgstr "Instàncies"
 msgid "Instance %d"
 msgstr "Instància %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Capes"
 
@@ -6894,12 +6894,12 @@ msgstr "A sota de l'objecte"
 msgid "Around object"
 msgstr "Al voltant de l'objecte"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Enviar a la impressora"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Laminar ara"
 
@@ -7008,7 +7008,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "L'expulsió del dispositiu %s(%s) ha fallat."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Nou Projecte"
 
@@ -7016,7 +7016,7 @@ msgstr "Nou Projecte"
 msgid "Expand sidebar"
 msgstr "Expandeix la barra lateral"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -7030,13 +7030,13 @@ msgstr[1] ""
 "Els paràmetres de sota han estat instal·lats temporalment a la instància "
 "activa de PrusaSlicer"
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 "Error en carregar el fitxer \"%1%\" a causa d'una configuració no vàlida."
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -7051,11 +7051,11 @@ msgstr[1] ""
 "La mida dels objectes del fitxer %s sembla ser zero.\n"
 "Aquests objectes han estat eliminats del model"
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr "La mida de l'objecte és zero"
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -7074,15 +7074,15 @@ msgstr[1] ""
 "La unitat interna de PrusaSlicer és el mil·límetre. Voleu recalcular les "
 "dimensions d'aquests objectes?"
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr "L'objecte és massa petit"
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr "Aplica-ho a tots els objectes petits restants que s'estan carregant."
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -7101,7 +7101,7 @@ msgstr[1] ""
 "polzades. La unitat interna de PrusaSlicer és el mil·límetre. Voleu "
 "recalcular les dimensions d'aquests objectes?"
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
@@ -7111,22 +7111,22 @@ msgstr ""
 "En lloc de considerar-los com a objectes múltiples, s'hauria de carregar\n"
 "el fitxer com un sol objecte amb múltiples parts?"
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Objecte de peces múltiples detectat"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 "Aquest fitxer no es pot carregar en mode simple. Vols canviar al mode expert?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Dades avançades detectades"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -7135,7 +7135,7 @@ msgstr ""
 "No podeu afegir l'objecte(s) des de % s perquè un o alguns d'ells són de "
 "diverses peces"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -7146,7 +7146,7 @@ msgstr ""
 "En lloc de considerar-los com a objectes múltiples, hauria de considerar\n"
 "aquests fitxers per formar un sol objecte que té diverses parts?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7154,39 +7154,39 @@ msgstr ""
 "La teva peça sembla massa gran, així que s'ha escalat automàticament perquè "
 "pugui cabre a la base d'impressió."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Objecte massa gran?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Exporta el fitxer STL:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "Exporta el fitxer AMF:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Desa el fitxer com a:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "Exporta el fitxer OBJ:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Suprimeix l'objecte"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr "Suprimeix tots els objectes"
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Reinicialitza el projecte"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
@@ -7194,15 +7194,15 @@ msgstr ""
 "L'objecte seleccionat no s'ha pogut dividir perquè només conté una part "
 "sòlida."
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr "S'han eliminat totes les parts no sòlides (modificadors)"
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Partir en diverses peces"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
@@ -7210,87 +7210,87 @@ msgstr ""
 "Un objecte té reforçadors de suport personalitzats que no es faran servir "
 "perquè els suports estan desactivats."
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr "Habilitar suports només per als reforçadors"
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Les dades no són vàlides"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Actualment s'està executant una altra feina d'exportació."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr "Reemplaçar des de:"
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr "No es pot substituir per més d'un volum"
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr "S'ha produït un error durant la substitució"
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr "Seleccioneu el fitxer nou"
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr "No s'ha seleccionat el fitxer per a la substitució"
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Seleccioneu el fitxer que voleu tornar a carregar"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "El fitxer seleccionat"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr "difereix del fitxer original"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr "Voleu substituir-lo"
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Torna a carregar des de:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "No es pot tornar a carregar:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "S'ha produït un error durant la recàrrega"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Torna a carregar-ho tot des del disc"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Hi ha advertiments actius sobre els models laminats:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "advertiments generats"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "Vista editor 3D"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr "Desfer / Refer s'està processant"
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7301,21 +7301,21 @@ msgstr ""
 "S'han modificat alguns paràmetres de %1%, que es perdran després de canviar "
 "la tecnologia de la impressora."
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr "Creant un projecte nou mentre es modifica el projecte actual."
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr "Creant un nou projecte mentre es modifiquen alguns paràmetres."
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 "Pots mantenir les modificacions dels preajustaments al nou projecte o "
 "descartar-los"
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
@@ -7326,125 +7326,125 @@ msgstr ""
 "Tingueu en compte que si es desen els canvis, el projecte nou no els "
 "conservarà"
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr "Creant un nou projecte"
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Carregar Projecte"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Importar Objecte"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Importar Objetes"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "no conté codi gcode vàlid."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "S'ha produït un error en carregar el fitxer .gcode"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Deixar anar fitxer de projecte"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Obre com a projecte"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Importa només la geometria"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Importa només la configuració"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Seleccioneu una acció que s'aplicarà al fitxer"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Acció"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "No tornis a mostrar"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "Només podeu obrir un fitxer .gcode alhora."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Arrossegar i deixar anar el fitxer de codi G"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Carregar Arxiu"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Carregar Arxius"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Tots els objectes seran eliminats, vols continuar?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Suprimeix els objectes seleccionats"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Augmenta les instàncies"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Disminueix les instàncies"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Introduïu el nombre de còpies:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "Còpies de l'objecte seleccionat"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "Estableix el nombre de còpies a %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Tallar pel Plànol"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "Desa el fitxer de codi G com a:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr "Desa el fitxer SL1 / SL1S com a:"
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr "El nom del fitxer proporcionat no és vàlid."
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr "Un sistema de fitxers FAT no permet els caràcters següents:"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
@@ -7452,15 +7452,15 @@ msgstr ""
 "La plataforma és buida.\n"
 "Vols desar el projecte?"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr "Desar projecte"
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Exportar"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
@@ -7468,14 +7468,14 @@ msgstr ""
 "Els suports personalitzats, les costures i la pintura multimaterial s'han "
 "retirat després de reparar la malla."
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Enganxa des del porta-retalls"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "General"
 
@@ -7624,7 +7624,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7638,7 +7638,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7649,7 +7649,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -8216,13 +8216,13 @@ msgstr "Enviar el codi G al host d'impressió"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Carregar el host amb el següent nom de fitxer:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 "Use barras diagonales ( / ) como separadores de directorios si fuese "
 "necesario."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Agrupar"
 
@@ -8231,18 +8231,18 @@ msgstr "Agrupar"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "El nom del fitxer enviat no s'acaba amb \"%s\". Voleu continuar?"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr "Pujar"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr "Enviar i imprimir"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr "Enviar i simular"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr "Pujar"
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8709,7 +8709,7 @@ msgstr "nom complet del perfil"
 msgid "symbolic profile name"
 msgstr "nom simbòlic del perfil"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Capes i Perímetres"
 
@@ -8793,11 +8793,11 @@ msgstr "Superposició"
 msgid "Flow"
 msgstr "Fluxe"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Altre"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Opcions de sortida"
 
@@ -8809,11 +8809,11 @@ msgstr "Impressió seqüencial"
 msgid "Extruder clearance"
 msgstr "Separació de l'extrusor"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Fitxer de sortida"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Scripts de postprocessament"
 
@@ -8821,19 +8821,20 @@ msgstr "Scripts de postprocessament"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Notes"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Dependències"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Dependències del perfil"
 
@@ -8917,7 +8918,7 @@ msgid "Ramming settings"
 msgstr "Configuració d'empenyiment"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Codi G personalitzat"
@@ -8964,8 +8965,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Mida i coordenades"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Capacitats"
 
@@ -9034,11 +9035,11 @@ msgstr "Inclinació"
 msgid "Tilt time"
 msgstr "Temps d'inclinació"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Correccions"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Exposició"
 
@@ -9217,42 +9218,46 @@ msgstr "Segur que desitges %1% el predefinit seleccionat?"
 msgid "%1% Preset"
 msgstr "%1% Predefinit"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Ajust"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Cerca"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Paraula sencera"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "Els límits de la màquina s'incorporaran al codi G i es faran servir per "
 "calcular el temps d'impressió."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9262,7 +9267,7 @@ msgstr ""
 "estimar el temps d'impressió, que per tant pot no ser exacte ja que la "
 "impressora pot aplicar un conjunt diferent de límits de la màquina."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9270,12 +9275,12 @@ msgstr ""
 "Els límits de la màquina no estan establerts, per tant, el temps d'impressió "
 "estimat pot no ser exacte."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "PANY BLOQUEJAT"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9283,12 +9288,12 @@ msgstr ""
 "indica que els paràmetres són els mateixos que els valors del sistema (o per "
 "defecte) per al grup d'opcions actual"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "PANY DESBLOQUEJAT"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9300,12 +9305,12 @@ msgstr ""
 "Feu clic a la icona PANY DESBLOQUEJAT per restablir tots els paràmetres del "
 "grup d'opcions actuals als valors del sistema (o per defecte)."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "VINYETA BLANCA"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9314,12 +9319,12 @@ msgstr ""
 "predeterminat),\n"
 "per al botó dret: indica que la configuració no s'ha modificat."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "FLETXA ENRERE"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9331,7 +9336,7 @@ msgstr ""
 "Feu clic al símbol FLETXA ENRERE per resetejar tots els paràmetres del grup "
 "d'opcions actuals als gravats anteriorment."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9339,7 +9344,7 @@ msgstr ""
 "La icona de PANY BLOQUEJAT indica que els paràmetres són els mateixos que "
 "els valors del sistema (per defecte) per al grup d'opcions actual"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9352,13 +9357,13 @@ msgstr ""
 "Feu clic per restablir totes les configuracions per al grup d'opcions "
 "actuals als valors del sistema (o per defecte)."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 "La icona de VINYETA BLANCA indica un predifinit no del sistema (o no per "
 "defecte)"
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9367,7 +9372,7 @@ msgstr ""
 "els de la darrera vegada que heu salvat els paràmetres per al grup d'opcions "
 "actual."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9378,7 +9383,7 @@ msgstr ""
 "són iguals als que es van desar per al grup d'opcions actual.\n"
 "Feu clic per tornar aquests valors als darrers desats."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -9386,7 +9391,7 @@ msgstr ""
 "La icona de PANY BLOQUEJAT indica que el valor és el mateix que el del "
 "sistema (per defecte)"
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9396,7 +9401,7 @@ msgstr ""
 "configuracions i no són iguals als valors del sistema (o predeterminats).\n"
 "Feu clic per reiniciar el valor actual als del sistema (o predeterminats)"
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9404,7 +9409,7 @@ msgstr ""
 "El símbol de VINYETA BLANCA indica que els valors són els mateixos que els "
 "dels paràmetres desats la darrera vegada."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9414,31 +9419,31 @@ msgstr ""
 "desat la darrera vegada.\n"
 "Feu clic per restaurar el valor al darrer paràmetre desat."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Material"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr "Perfil d'impressió de material"
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Cap del suport"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Pilar de suport"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "Connexió de les varetes de suport i unions"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Generació automàtica"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9447,74 +9452,74 @@ msgstr ""
 "\"%1%\" està desactivat perquè \"%2%\" és a la categoria \"%3%\".\n"
 "Per activar \"%1%\", si us plau desactiva \"%2%\""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Elevació de l'objecte"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Pad al voltant de l'objecte"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Undef"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Canvis no desats"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "S'estan canviant els predefinits: canvis no desats"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Valor antic"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Valor nou"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr "Mantenir"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Transferir"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr "No desar"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Descartar"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Desar"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9522,11 +9527,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "PrusaSlicer recordarà la vostra acció."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9535,58 +9540,59 @@ msgstr ""
 "Visita \"Preferències\" i marca\"%1%\"\n"
 "per a què pregunti sobre els canvis no guardats novament."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Alguns camps són massa llargs per cabre. El clic dret del ratolí mostra el "
 "text complet."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr "No es desaran tots els canvis de configuració"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Tots els canvis dels ajustaments seran descartats."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "Desa les opcions seleccionades."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr "Conserva la configuració seleccionada."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 "Transfereix la configuració seleccionada al predefinit seleccionat "
 "recentment."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "Desar les opcions seleccionades a la configuració predefinida \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 "Transferir les opcions seleccionades al nou predifnit seleccionat \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] "S'ha modificat el predefinit següent"
 msgstr[1] "S'han modificat els predefinits següents"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr "Predefinit \"%1%\" té els següents canvis no desats:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9595,7 +9601,7 @@ msgstr ""
 "El predefinit \"%1%\" no és compatible amb el perfil d'impressora nou i té "
 "els canvis següents no desats:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9604,40 +9610,40 @@ msgstr ""
 "El predefinit \"%1%\" no és compatible amb el nou perfil d'impressió i té "
 "els canvis següents:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Comptador d'extrusors"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr "Mostra tots els predefinits (inclosos els incompatibles)"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr "Valor predefinit esquerre"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr "Valor predefinit dret"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr "No s'ha trobat un dels predefinits"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr "Els predefinits comparats tenen una tecnologia d'impressora diferent"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr "Els predefinits són els mateixos"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
@@ -9646,11 +9652,11 @@ msgstr ""
 "Feu clic en aquest botó per seleccionar el mateix predefinit per al "
 "predefinit dret i esquerre."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr "Categoria sense definir"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr "Grup sense definir"
 
@@ -10515,26 +10521,26 @@ msgstr "ha fallat la validació"
 msgid "write calledback failed"
 msgstr "ha fallat write calledback"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Tots els objectes són fora del volum d'impressió."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "La configuració subministrada provocarà una impressió buida."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "Alguns objectes estan massa a prop; L'extrusor xocarà amb ells."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Alguns objectes són massa alts i no es poden imprimir sense col·lisions "
 "d'extrusora."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10544,7 +10550,7 @@ msgstr ""
 "tots menys l'últim objecte o habiliteu el mode seqüencial per "
 "\"complete_objects\"."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -10552,7 +10558,7 @@ msgstr ""
 "L'opció gaso en espiral sols pot ser usada per imprimir objectes d'un sol "
 "material."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10560,7 +10566,7 @@ msgstr ""
 "La torre de neteja només és compatible si tots els extrusors tenen el mateix "
 "diàmetre de nozzle i usen filament del mateix diàmetre."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10568,7 +10574,7 @@ msgstr ""
 "La Torre de Neteja només és compatible amb les variants de codi G usades per "
 "Marlin, RepRap/Sprinter, RepRapFirmware i Repetier."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10576,20 +10582,20 @@ msgstr ""
 "Actualment,Torre de Neteja només és compatible amb l'encaminament relatiu de "
 "l'extrusor (use_relative_e_distances=1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "La prevenció de degoteig actualment no és compatible amb la torre de neteja "
 "activa."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 "La Torre de Neteja actualment no és compatible amb E volumètric "
 "(use_volumetric_e=0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10597,7 +10603,7 @@ msgstr ""
 "La Torre de Neteja no es permet ara per a impressions seqüencials "
 "multimaterial."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10605,7 +10611,7 @@ msgstr ""
 "La torre de neteja només és compatible amb diversos objectes si tenen "
 "alçades de capes iguals"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10613,7 +10619,7 @@ msgstr ""
 "La torre de neteja només es permet per a diversos objectes si s'imprimeixen "
 "sobre un nombre igual de capes de bassa"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10621,7 +10627,7 @@ msgstr ""
 "La torre de neteja només és compatible amb diversos objectes si "
 "s'imprimeixen amb la mateixa support_material_contact_distance"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10629,7 +10635,7 @@ msgstr ""
 "La torre de neteja només és compatible amb diversos objectes si es tallen "
 "igual."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10637,23 +10643,23 @@ msgstr ""
 "La Torre de Neteja només és compatible si tots els objectes tenen la mateixa "
 "alçada de capa variable"
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "Un o més objectes han estat assignats a un extrusor inexistent."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm és massa baix per ser imprès a una alçada de capa de %3% mm"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 "%1%=%2% mm excessius per ser imprimible amb un nozzle de diàmetre de %3% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10665,7 +10671,7 @@ msgstr ""
 "o support_material_interface_extruder == 0), tots els nozzles han de ser del "
 "mateix diàmetre."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10673,7 +10679,7 @@ msgstr ""
 "Perquè la torre de neteja funcioni amb suports solubles, les capes de "
 "suports necessiten estar sincronitzades amb les capes de l'objecte."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10685,28 +10691,47 @@ msgstr ""
 "support_material_extruder com support_material_interface_extruder s'han de "
 "configurar a 0)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 "L'alçada de primera capa no pot ser més gran que el diàmetre del nozzle"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "L'alçada de la capa no pot ser més gran que diàmetre del nozzle"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Omplint capes"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr "Generant faldilla i bassa"
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "S'està exportant el codi G"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "S'està generant el codi G"
 
diff --git a/resources/localization/en/PrusaSlicer_en.po b/resources/localization/en/PrusaSlicer_en.po
index 23e8b93b8..c70eeaf39 100644
--- a/resources/localization/en/PrusaSlicer_en.po
+++ b/resources/localization/en/PrusaSlicer_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -543,7 +543,7 @@ msgstr ""
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr ""
 
@@ -551,17 +551,17 @@ msgstr ""
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr ""
 
@@ -620,7 +620,7 @@ msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr ""
 
@@ -705,7 +705,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr ""
 
@@ -794,7 +794,7 @@ msgstr ""
 "an update is applied."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1080,7 +1080,7 @@ msgstr ""
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr ""
 
@@ -1144,7 +1144,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1591,8 +1591,8 @@ msgid "parameter name"
 msgstr ""
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr ""
 
@@ -1780,7 +1780,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr ""
 
@@ -1982,7 +1982,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr ""
 
@@ -2251,7 +2251,7 @@ msgid "Add..."
 msgstr ""
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr ""
 
@@ -3127,25 +3127,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3157,7 +3157,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3166,19 +3166,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3188,53 +3188,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3247,291 +3247,291 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3637,7 +3637,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3647,7 +3647,7 @@ msgid "Advanced"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3661,8 +3661,8 @@ msgid "Supports"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3672,8 +3672,8 @@ msgstr ""
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3776,7 +3776,7 @@ msgstr ""
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3802,19 +3802,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4075,7 +4075,7 @@ msgstr ""
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4494,7 +4494,7 @@ msgstr ""
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr ""
@@ -4613,18 +4613,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4784,11 +4784,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr ""
 
@@ -4829,11 +4829,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr ""
 
@@ -5214,7 +5214,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr ""
@@ -5326,29 +5326,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5858,7 +5858,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -5967,9 +5967,9 @@ msgstr ""
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr ""
 
@@ -6230,7 +6230,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6256,8 +6256,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr ""
 
@@ -6513,12 +6513,12 @@ msgstr ""
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr ""
 
@@ -6625,7 +6625,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr ""
 
@@ -6633,7 +6633,7 @@ msgstr ""
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6643,12 +6643,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6659,11 +6659,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6676,15 +6676,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6697,180 +6697,180 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6878,171 +6878,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr ""
 
@@ -7159,7 +7159,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7173,7 +7173,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7184,7 +7184,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7687,11 +7687,11 @@ msgstr ""
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7700,18 +7700,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr ""
@@ -8147,7 +8147,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr ""
 
@@ -8231,11 +8231,11 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr ""
 
@@ -8247,11 +8247,11 @@ msgstr ""
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr ""
 
@@ -8259,19 +8259,20 @@ msgstr ""
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr ""
 
@@ -8346,7 +8347,7 @@ msgid "Ramming settings"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr ""
@@ -8384,8 +8385,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr ""
 
@@ -8450,11 +8451,11 @@ msgstr ""
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr ""
 
@@ -8609,69 +8610,73 @@ msgstr ""
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8679,23 +8684,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8703,13 +8708,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8717,17 +8722,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "WHITE BULLET icon indicates a non-system (or non-default) preset."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8735,253 +8740,254 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
-msgid ""
-"You will not be asked about the unsaved changes in presets the next time you "
-"create new project"
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
-"switch a preset"
+"create new project"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
+"You will not be asked about the unsaved changes in presets the next time you "
+"switch a preset"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
+msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
 "- Closing PrusaSlicer while some presets are modified,\n"
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9743,116 +9749,116 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "One or more objects were assigned an extruder that the printer does not have."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -9860,13 +9866,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -9874,27 +9880,46 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr ""
 
diff --git a/resources/localization/hu/PrusaSlicer_hu.po b/resources/localization/hu/PrusaSlicer_hu.po
index a9f8882bd..09567ee4b 100644
--- a/resources/localization/hu/PrusaSlicer_hu.po
+++ b/resources/localization/hu/PrusaSlicer_hu.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -602,7 +602,7 @@ msgstr "Aktív"
 msgid "PrusaSlicer version"
 msgstr "PrusaSlicer verzió"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "nyomtatás"
 
@@ -610,17 +610,17 @@ msgstr "nyomtatás"
 msgid "filaments"
 msgstr "filamentek"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA nyomtatás"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA anyag"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "nyomtató"
 
@@ -679,7 +679,7 @@ msgstr "Standard"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Összes"
 
@@ -770,7 +770,7 @@ msgstr "SLA anyagok"
 msgid "All installed printers are compatible with the selected %1%."
 msgstr "Minden telepített nyomtató kompatibilis a kiválasztott %1% -val."
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "filament"
 
@@ -865,7 +865,7 @@ msgstr ""
 "pillanatfelvétel készül."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Újratöltés lemezről"
 
@@ -1175,7 +1175,7 @@ msgstr "Befejezés"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Mégse"
 
@@ -1248,7 +1248,7 @@ msgstr ""
 "létrejött."
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr "Asztal integráció"
 
@@ -1741,8 +1741,8 @@ msgid "parameter name"
 msgstr "paraméter név"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1951,7 +1951,7 @@ msgstr "Hozzáadás a tárgyasztalhoz"
 msgid "Add selected shape(s) to the bed"
 msgstr "Kijelölt alakzat(ok) hozzáadása a tárgyasztalhoz"
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Hozzáadás"
 
@@ -2156,7 +2156,7 @@ msgid "Wipe"
 msgstr "Törlés"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Opciók"
 
@@ -2425,7 +2425,7 @@ msgid "Add..."
 msgstr "Hozzáadás..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Összes törlése"
 
@@ -3354,7 +3354,7 @@ msgstr "Kritikus hiba"
 msgid "Internal error: %1%"
 msgstr "Belső hiba: %1%"
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3364,7 +3364,7 @@ msgstr ""
 "Próbálja meg manuálisan törölni a fájlt a hiba elhárításához. A felhasználói "
 "profilok nem lesznek érintettek."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3372,12 +3372,12 @@ msgstr ""
 "Hiba a PrusaGCodeViewer konfigurációs fájl elemzése során, valószínűleg "
 "sérült. Próbálja meg manuálisan törölni a fájlt a hiba elhárításához."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr "Ön a %1% %2% verzióját nyitja meg."
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3395,7 +3395,7 @@ msgstr ""
 "Ha igen, akkor az aktív konfigurációról biztonsági másolat készül az új "
 "konfiguráció importálása előtt."
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3408,19 +3408,19 @@ msgstr ""
 "\n"
 "Importáljuk ezt a meglévő konfigurációt?"
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr "Importálás_"
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr "Ne importálja"
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr "Folytatás és az újabb konfiguráció importálása?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3436,7 +3436,7 @@ msgstr ""
 "https://www.prusa3d.cz/prusaslicer/ oldalról.\n"
 "Szeretné folytatni?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3445,46 +3445,46 @@ msgstr ""
 "%s\n"
 "Szeretné folytatni?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Emlékezzen a választásomra"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "Konfiguráció betöltése"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr "Elérhető a(z) %1% új kiadott verziója."
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr "Tekintse meg a Letöltési oldalt."
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr "Elérhető a(z) %1% új kiadás előtti verziója."
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Tekintse meg a kiadások oldalt."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "A beállítások fül előkészítése"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr "Ablak pozíciójának visszaállítása indításkor"
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr "A PrusaSlicer összeomlást követően indult el"
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3510,24 +3510,24 @@ msgstr ""
 "\n"
 "Translated with www.DeepL.com/Translator (free version)"
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr "\"%1%\" letiltása"
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr "Hagyja engedélyezve a \"%1%\"-ot"
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "A következő előbeállítások állnak rendelkezésre a \"Nyomtató feltöltés\" "
 "mentett beállításaival"
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3537,7 +3537,7 @@ msgstr ""
 "nyomtató beállításaiban. \n"
 "A beállítások a fizikai nyomtatók beállításaiban lesznek elérhetőek."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3547,138 +3547,138 @@ msgstr ""
 "létrehozásuk során.\n"
 "Megjegyzés: Ez a név később módosítható a fizikai nyomtató beállításainál"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Információ"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Újralétrehozás_"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Az aktuális előbeállítások betöltése"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Mód nézet betöltése"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Válasszon ki egy fájlt (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Válasszon ki egy vagy több fájlt (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Válasszon ki egy fájlt (GCODE/.GCO/.G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Egy alkalmazás nyelvének megváltoztatása"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Válassza ki a nyelvet"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Nyelv"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "módosított"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "%s Fut_"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "Konfigurációs Pillanatfelvételek"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Konfigurációs pillanatfelvételek megtekintése / aktiválása"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Konfigurációs Pillanatfelvétel Készítése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Pillanatfelvétel készítése az aktuális konfigurációról"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr "Konfigurációs Frissítések Keresése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Konfigurációs frissítések keresése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "Beállítások"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Alkalmazás beállítások"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Egyszerű"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Egyszerű Megjelenítési Mód"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Haladó"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Haladó Megjelenítési Mód"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Szakértő"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Szakértő Megjelenítési Mód"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Mód"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s Megjelenítési Mód"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "Nyelv"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr "Nyomtató &Firmware Feltöltése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Firmware feltöltése Arduino alapú nyomtatóra"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr "Konfigurációs pillanatkép készítése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
@@ -3686,32 +3686,32 @@ msgstr ""
 "Néhány előbeállítás módosult, és a nem mentett változásokat a konfigurációs "
 "pillanatkép nem rögzíti."
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Pillanatkép neve"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr "Konfigurációs pillanatkép betöltése"
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr "Folytatja a konfigurációs pillanatkép aktiválását: %1%?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "Nem sikerült a konfigurációs pillanatkép aktiválása."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr "Alkalmazás újraindítása"
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Nyelv kiválasztása"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3719,89 +3719,89 @@ msgstr ""
 "A nyelv megváltoztatása újraindítja az alkalmazást.\n"
 "Elveszíti a tárgyasztal tartalmát."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Akarja folytatni?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "Konfiguráció"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] "Az előbeállítás módosításai sikeresen elmentésre kerültek"
 msgstr[1] "Az előbeállítások módosításai sikeresen elmentésre kerültek"
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr "Új projekt esetén az összes módosítás visszaállításra kerül"
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr "Új projekt betöltése az jelenlegi projekt módosítása közben."
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr "A projekt betöltődik"
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr "Új projekt megnyitása, miközben néhány előbeállítás nincs elmentve."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "A feltöltések még mindig folyamatban vannak"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Megállítja őket, és akkor is folytatja?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Folyamatban lévő feltöltések"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 "SLA technológiával nem lehetséges több részből álló objektum(ok) nyomtatása."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "Ellenőrizze az objektumlistát, előbeállítás váltás előtt."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr "Konfiguráció szerkesztése a ConfigWizardból_"
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Válasszon egy gcode fájlt:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr "Hiperhivatkozás megnyitása az alapértelmezett böngészőben?"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr "PrusaSlicer: Hiperhivatkozás megnyitása"
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "A hiperhivatkozások böngészőben való megnyitásának letiltása"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr "A PrusaSlicer emlékezni fog a választására."
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 "Erről nem fogjuk újra megkérdezni a hiperhivatkozások lebegtetésével "
 "kapcsolatban."
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -3810,8 +3810,8 @@ msgstr ""
 "Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" \n"
 "lehetőséget a választása módosításához."
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: Ne kérdezzen rá újra"
 
@@ -3917,7 +3917,7 @@ msgstr "Szoknya és karima"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3927,7 +3927,7 @@ msgid "Advanced"
 msgstr "Haladó"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3941,8 +3941,8 @@ msgid "Supports"
 msgstr "Támasztékok"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3952,8 +3952,8 @@ msgstr "Támasztékok"
 msgid "Pad"
 msgstr "Párna"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -4056,7 +4056,7 @@ msgstr "Exportálás STL-ként"
 msgid "Reload the selected volumes from disk"
 msgstr "A kiválasztott térfogatok újra betöltésé a lemezről"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr "Helyettesítés STL-lel"
 
@@ -4083,19 +4083,19 @@ msgid "Scale the selected object to fit the print volume"
 msgstr ""
 "Méretezze a kiválasztott objektumot a (maximális) nyomtatási térfogathoz"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Konvertálás angolszász mértékegységről"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Konvertálás visszavonása (angolszász mértékegységről)"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr "Konvertálás metrikus mértékegységről"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr "Konvertálás visszavonása (metrikus mértékegységről)"
 
@@ -4362,7 +4362,7 @@ msgstr "Módosító Betöltése"
 msgid "Loading"
 msgstr "Betöltés"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "Fájl betöltése"
 
@@ -4805,7 +4805,7 @@ msgstr "Paraméter eltávolítása"
 msgid "Delete Option %s"
 msgstr "%s Opció Törlése"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "%s Opció Megváltoztatása"
@@ -4925,18 +4925,18 @@ msgstr "Szerszám jelölő"
 msgid "Legend/Estimated printing time"
 msgstr "Magyarázat/becsült nyomtatási idő"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Bővebben"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr "Beállítások megnyitása."
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr "Dokumentáció megnyitása a webböngészőben."
 
@@ -5113,13 +5113,13 @@ msgstr ""
 "Az importált SLA-archívum nem tartalmazott előbeállításokat. Az aktuális SLA "
 "előbeállítások kerülnek felhasználásra."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 "Nem tölthet be olyan SLA projektet, amelyben több részből álló objektum van "
 "a tárgyasztalon"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Figyelem!"
 
@@ -5162,11 +5162,11 @@ msgstr ""
 "Konfiguráció betöltése ini/amf/3mf/gcode fájlból, és hozzáadás a meglévőhöz"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "G-kód exportálása"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "G-kód küldése"
 
@@ -5560,7 +5560,7 @@ msgstr "Jelmagyarázat és becsült nyomtatási idő megjelenítése/elrejtése"
 msgid "Show/Hide G-code window"
 msgstr "G-kód ablak megjelenítése/elrejtése"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Előnézet"
@@ -5678,29 +5678,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr "A PrusaSlicer bezárása, miközben egyes előbeállítások módosultak."
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Nyomtatási Beállítások"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Alapanyag Beállítások"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Filament Beállítások"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Nyomtató Beállítások"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr "Névtelen"
 
@@ -6214,7 +6214,7 @@ msgid "Open New Instance"
 msgstr "Új Példány Megnyitása"
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr "Előbeállítások Összehasonlítása"
 
@@ -6323,9 +6323,9 @@ msgstr "G-kód"
 msgid "Save zip file as:"
 msgstr "Zip fájl mentése másként:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Szeletelés"
 
@@ -6595,7 +6595,7 @@ msgstr "HIBA:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "FIGYELMEZTETÉS:"
 
@@ -6621,8 +6621,8 @@ msgstr "Példányok"
 msgid "Instance %d"
 msgstr "Példány %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Rétegek"
 
@@ -6903,12 +6903,12 @@ msgstr "Objektum alatt"
 msgid "Around object"
 msgstr "Objektum körül"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Küldés nyomtatóra"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Szeletelés most"
 
@@ -7020,7 +7020,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "A %s(%s) eszköz eltávolítása nem sikerült."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Új Projekt"
 
@@ -7028,7 +7028,7 @@ msgstr "Új Projekt"
 msgid "Expand sidebar"
 msgstr "Az oldalsáv kibontása"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -7042,12 +7042,12 @@ msgstr[1] ""
 "Az alábbi_ előbeállítások ideiglenesen telepítve lettek a PrusaSlicer aktív "
 "példányára"
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr "A \"%1%\" fájl betöltése nem sikerült érvénytelen konfiguráció miatt."
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -7062,11 +7062,11 @@ msgstr[1] ""
 "A fájlban lévő %s objektumuk mérete nullának tűnik.\n"
 "Ezek az objektumok eltávolításra kerültek a modellből"
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr "Az objektum mérete zéró"
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -7087,15 +7087,15 @@ msgstr[1] ""
 "A PrusaSlicer belső mértékegysége a milliméter. Szeretné újraszámolni az "
 "objektumok méreteit?"
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr "Az objektum túl kicsi"
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr "Alkalmazza az összes hátralévő betöltendő kis objektumra."
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -7116,7 +7116,7 @@ msgstr[1] ""
 "A PrusaSlicer belső mértékegysége a milliméter. Szeretné újraszámolni az "
 "objektumok méreteit?"
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
@@ -7126,22 +7126,22 @@ msgstr ""
 "Több különálló objektum helyett, egyetlen, több részből álló objektumként "
 "kell betölteni őket?"
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Több részből álló objektum észlelve"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 "Ez a fájl nem tölthető be egyszerű módban. Szeretne haladó módra váltani?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Fejlett adatok érzékelve"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -7150,7 +7150,7 @@ msgstr ""
 "Nem lehet hozzáadni az objektum(ok)at %s-ből, mert az egyik vagy néhány "
 "közülük több részből áll(nak)"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -7160,7 +7160,7 @@ msgstr ""
 "Több különálló objektum helyett, egyetlen, több részből álló objektumként "
 "kell betölteni őket?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7168,39 +7168,39 @@ msgstr ""
 "Az objektum túl nagynak tűnik, ezért automatikusan le lett méretezve, hogy "
 "illeszkedjen a tárgyasztalhoz."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Az objektum túl nagy?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "STL fájl exportálása:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "AMF fájl exportálása:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Fájl mentése mint:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "OBJ fájl exportálása:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Objektum Törlése"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr "Az Összes Objektum Törlése"
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Projekt Újraindítása"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
@@ -7208,15 +7208,15 @@ msgstr ""
 "A kijelölt objektumot nem lehetett szétválasztani, mert csak egy szilárd "
 "alkatrészt tartalmaz."
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr "Minden nem szilárd alkatrész (módosító) törlésre került"
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Objektumokra Osztás"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
@@ -7224,87 +7224,87 @@ msgstr ""
 "Egy objektumnak vannak olyan egyéni támaszték kényszerítői, amelyek nem "
 "lesznek használva, mivel a támasztékok le vannak tiltva."
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr "Támasztékok engedélyezése csak a kényszerítőkre"
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Érvénytelen adat"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Jelenleg egy másik exportálási feladat is fut."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr "Helyettesítés innen:"
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr "Nem lehet egynél több térfogattal helyettesíteni"
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr "Hiba helyettesítés közben"
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr "Válassza ki az új fájlt"
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr "A helyettesítéshez nem volt fájl kiválasztva"
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Válassza ki az újratöltendő fájlt"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "A kiválasztott fájl"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr "különbözik az eredeti fájltól"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr "Szeretné helyettesíteni"
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Újratöltés innen:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "Újratöltés sikertelen:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "Hiba újratöltés közben"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Minden újratöltése lemezről"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Aktív figyelmeztetések vonatkoznak a szeletelt modellekre:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "generált figyelmeztetések"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D szerkesztő nézet"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr "Visszavonás / Mégis folyamatban"
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7315,21 +7315,21 @@ msgstr ""
 "Néhány %1% előbeállítás módosult, amelyek a nyomtatási technológia átváltása "
 "után elvesznek."
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr "Új projekt létrehozása a jelenlegi projekt módosítása közben."
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr "Új projekt létrehozása néhány előbeállítás módosítása közben."
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 "Az előbeállítások módosításait megtarthatja az új projekthez, vagy elvetheti "
 "őket"
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
@@ -7340,125 +7340,125 @@ msgstr ""
 "Megjegyzés: ha a módosítások elmentésre kerülnek, akkor az új projekt nem "
 "tartja meg őket"
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr "Új projekt létrehozása"
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Projekt Betöltése"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Objektum Importálása"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Objektumok Importálása"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "nem tartalmaz érvényes g-kódot."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "Hiba a .gcode fájl betöltése közben"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Projekt fájl ejtése"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Megnyitás Projektként"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Csak geometria importálása"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Csak a konfiguráció importálása"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Válassza ki a fájlra alkalmazandó műveletet"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Művelet"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "Ne mutassa újra"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "Egyszerre csak egy .gcode fájlt nyithat meg."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Húzza és ejtse a G-kód fájlt"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Fájl Betöltése"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Fájlok Betöltése"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Minden objektum el lesz távolítva, folytatja?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Kijelölt Objektumok Törlése"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Példányszám Növelése"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Példányszám Csökkentése"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Adja meg a szükséges példányok számát:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "A kijelölt objektum másolatai"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "A másolatok számának beállítása erre: %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Vágás Síkkal"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G-kód fájl mentése másként:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr "SL1 / SL1S fájl mentése másként:"
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr "A megadott fájlnév érvénytelen."
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr "A következő karaktereket a FAT fájlrendszer nem támogatja:"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
@@ -7466,15 +7466,15 @@ msgstr ""
 "A tárgyasztal üres.\n"
 "Szeretné elmenteni a projektet?"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr "Projekt mentése"
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Exportálás"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
@@ -7482,14 +7482,14 @@ msgstr ""
 "Az egyedi támasztékok, varratok és a többanyagú festés eltávolításra került "
 "háló javítása után."
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Beillesztés Vágólapról"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Általános"
 
@@ -7640,7 +7640,7 @@ msgstr ""
 "- Új projekt betöltésekor, vagy létrehozásakor"
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7659,7 +7659,7 @@ msgstr ""
 "- Új projekt betöltésekor, miközben egyes előbeállítások módosultak"
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 "Kérdezzen rá az előbeállítások nem mentett módosításaira új előbeállítás "
@@ -7674,7 +7674,7 @@ msgstr ""
 "előbeállítást választ vagy visszaállít egy előbeállítást"
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 "Kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új "
@@ -8246,11 +8246,11 @@ msgstr "G-kód küldése a nyomtató gazdagépének"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Feltöltés a Nyomtató gazdagépére a következő fájlnévvel:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "Ha szükséges, használjon perjeleket ( / ) könyvtárelválasztóként."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Csoport"
 
@@ -8259,18 +8259,18 @@ msgstr "Csoport"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "A feltöltött fájl neve nem végződik „%s”-ra. Szeretné folytatni?"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr "Feltöltés"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr "Feltöltés és Nyomtatás"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr "Feltöltés és Szimuláció"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr "Feltöltés"
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "Azonosító"
@@ -8730,7 +8730,7 @@ msgstr "teljes profil név"
 msgid "symbolic profile name"
 msgstr "szimbolikus profil név"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Rétegek és kerületek"
 
@@ -8814,11 +8814,11 @@ msgstr "Átfedés"
 msgid "Flow"
 msgstr "Áramlás"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Egyéb"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Kimeneti lehetőségek"
 
@@ -8830,11 +8830,11 @@ msgstr "Szekvenciális nyomtatás"
 msgid "Extruder clearance"
 msgstr "Extruder körüli szabad tér"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Kimeneti fájl"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Utófeldolgozó szkriptek"
 
@@ -8842,19 +8842,20 @@ msgstr "Utófeldolgozó szkriptek"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Megjegyzések"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Függőségek"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Profilfüggőségek"
 
@@ -8936,7 +8937,7 @@ msgid "Ramming settings"
 msgstr "Tömörítési beállítások"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Egyéni G-kód"
@@ -8983,8 +8984,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Méret és koordináták"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Képességek"
 
@@ -9052,11 +9053,11 @@ msgstr "Billentés"
 msgid "Tilt time"
 msgstr "Billentési idő"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Korrekciók"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Expozíció"
 
@@ -9236,42 +9237,46 @@ msgstr "Biztos, hogy a kiválasztott előbeállítást %1% szeretné?"
 msgid "%1% Preset"
 msgstr "%1% Előbeállítás"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Beállítás"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Keresés"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr "Csere erre"
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr "Reguláris kifejezés"
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr "Nagy- és kisbetű érzékeny"
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Teljes szó"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr "Egysoros egyeztetés"
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "A gépi korlátok a G-kódba kerülnek, és a nyomtatási idő becslésére "
 "szolgálnak."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9281,7 +9286,7 @@ msgstr ""
 "felhasználásra kerülnek. A nyomtató más gépi korlátokat alkalmazhat, ezért a "
 "nyomtatási idő becslése pontatlan lehet."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9289,12 +9294,12 @@ msgstr ""
 "A gépi korlátok nincsenek beállítva, ezért a nyomtatási idő becslése "
 "pontatlan lehet."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "ZÁRT LAKAT"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9302,12 +9307,12 @@ msgstr ""
 "azt jelzi, hogy a beállítások megegyeznek az aktuális opciócsoport rendszer- "
 "(vagy alapértelmezett) értékeivel"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "NYITOTT LAKAT"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9319,12 +9324,12 @@ msgstr ""
 "Kattintson a NYITOTT LAKAT ikonra az aktuális opciócsoport összes "
 "beállításának visszaállításához a rendszer (vagy az alapértelmezett) értékre."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "SZÜRKE PÖTTY"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9333,12 +9338,12 @@ msgstr ""
 "értéket jelez,\n"
 "jobb gomb esetén: azt jelzi, hogy a beállításokat nem módosították."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "VISSZA NYÍL"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9350,7 +9355,7 @@ msgstr ""
 "Kattintson a VISSZA NYÍL ikonra az aktuális opciócsoport összes "
 "beállításának visszaállításához az utoljára mentett állapotra."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9358,7 +9363,7 @@ msgstr ""
 "ZÁRT LAKAT ikon azt jelzi, hogy a beállítások megegyeznek az aktuális "
 "opciócsoport rendszer- (vagy alapértelmezett) értékeivel"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9371,13 +9376,13 @@ msgstr ""
 "Kattintson az aktuális opciócsoport összes beállításának visszaállításához a "
 "rendszer (vagy az alapértelmezett) értékre."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 "A SZÜRKE PÖTTY ikon a rendszeren kívüli (vagy nem alapértelmezett) "
 "előbeállítást jelzi."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9385,7 +9390,7 @@ msgstr ""
 "A SZÜRKE PÖTTY ikon azt jelzi, hogy a beállítások megegyeznek az aktuális "
 "opciócsoport utoljára mentett előbeállításával."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9397,7 +9402,7 @@ msgstr ""
 "Kattintson az aktuális opciócsoport összes beállításának visszaállításához "
 "az utoljára mentett állapotra."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -9405,7 +9410,7 @@ msgstr ""
 "ZÁRT LAKAT ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy "
 "alapértelmezett) értékével."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9416,7 +9421,7 @@ msgstr ""
 "Kattintson az aktuális érték visszaállításához a rendszer (vagy "
 "alapértelmezett) értékre."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9424,7 +9429,7 @@ msgstr ""
 "A SZÜRKE PÖTTY azt jelzi, hogy az érték megegyezik az utoljára mentett "
 "előbeállítással."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9435,31 +9440,31 @@ msgstr ""
 "Kattintson az aktuális érték visszaállításához az utoljára mentett "
 "beállításra."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Anyag"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr "Anyag nyomtatási profil"
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Támasztó fej"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Támasztó pillér"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "A tartópálcák és a csomópontok csatlakoztatása"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Automatikus generálás"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9469,62 +9474,62 @@ msgstr ""
 "kategóriában. \n"
 "\"%1%\" engedélyezéséhez kapcsolja ki a \"%2%\"-ot."
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Objektum magassága"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Párna az objektum körül"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Nem definált"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Nem Mentett Változások"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "Előbeállítások Átváltása: Nem Mentett Módosítások"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Régi Érték"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Új Érték"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr "Megtartás"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Átvitel"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr "Ne mentse"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Elvetés"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Mentés"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
@@ -9532,7 +9537,7 @@ msgstr ""
 "Az előbeállítások nem mentett módosításaira legközelebb nem kérdez rá a "
 "rendszer új projekt létrehozásakor"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
@@ -9540,7 +9545,7 @@ msgstr ""
 "Az előbeállítások nem mentett módosításaira legközelebb nem kérdez rá a "
 "rendszer előbeállítás váltáskor"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9552,11 +9557,11 @@ msgstr ""
 "- A PrusaSlicer bezárásakor, miközben egyes előbeállítások módosultak,\n"
 "- Új projekt betöltésekor, miközben egyes előbeállítások módosultak"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "A PrusaSlicer emlékezni fog a műveletére."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9566,59 +9571,60 @@ msgstr ""
 "lehetőséget.\n"
 "hogy újra rákérdezzen a nem mentett módosításokra."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Néhány mező túl hosszú ahhoz, hogy elférjen. A jobb egérgombbal történő "
 "kattintással a teljes szöveg megjelenik."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr "A beállítások módosításai nem kerülnek mentésre"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Minden beállítási változtatás elvetése."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "A kiválasztott beállítások mentése."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr "A kiválasztott beállítások megtartása."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 "A kiválasztott beállítások átvitele az újonnan kijelölt előbeállításba."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "A kiválasztott beállítások mentése a \"%1%\" előbeállításba."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 "A kiválasztott beállítások átvitele az újonnan kijelölt \"%1%\" "
 "előbeállításba."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] "A következő előbeállítás módosult"
 msgstr[1] "A következő előbeállítások módosultak"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 "A \"%1%\" előbeállítás a következő el nem mentett változásokat tartalmazza:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9627,7 +9633,7 @@ msgstr ""
 "A \"%1%\" előbeállítás nem kompatibilis az új nyomtatóprofillal, és a "
 "következő el nem mentett változtatásokat tartalmazza:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9636,42 +9642,42 @@ msgstr ""
 "A \"%1%\" előbeállítás nem kompatibilis az új nyomtatási profillal, és a "
 "következő el nem mentett változtatásokat tartalmazza:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Extruderek száma"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr "Előbeállítások kiválasztása az összehasonlításhoz"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr "Minden előbeállítás megjelenítése (beleértve az inkompatibiliseket is)"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr "Bal Előbeállítás Értéke"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr "Jobb Előbeállítás Értéke"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr "Az egyik előbeállítás nem található"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 "Az összehasonlított előbeállítások különböző nyomtatási technológiával "
 "rendelkeznek"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr "Az előbeállítások megyegyeznek"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
@@ -9680,11 +9686,11 @@ msgstr ""
 "Erre a gombra kattintva ugyanazt az előbeállítást választhatja ki a jobb és "
 "a bal előbeállításhoz."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr "Nem definiált kategória"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr "Nem definiált csoport"
 
@@ -10557,27 +10563,27 @@ msgstr "validáció sikertelen"
 msgid "write calledback failed"
 msgstr "írás calledback sikertelen"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Minden objektum a nyomtatási területen kívülre esik."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "A megadott beállítások üres nyomtatáshoz vezetnek."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 "Néhány objektum túl közel van egymáshoz; az extruder ütközni fog velük."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Néhány objektum túl magas, ezért nem nyomtathatók ki az extruder ütközése "
 "nélkül."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10587,7 +10593,7 @@ msgstr ""
 "távolítsa el az összes objektumot az utolsó kivételével, vagy engedélyezze a "
 "szekvenciális módot a „complete_objects” paraméterrel."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -10595,7 +10601,7 @@ msgstr ""
 "A Spirálváza opció csak egyféle anyagból álló objektum nyomtatásához "
 "használható."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10603,7 +10609,7 @@ msgstr ""
 "A törlőtorony csak akkor támogatott, ha minden extruder azonos "
 "fúvókaátmérővel rendelkezik és azonos átmérőjű filamentet használ."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10611,7 +10617,7 @@ msgstr ""
 "A törlőtorony jelenleg csak a Marlin, a RepRap/Sprinter, a RepRapFirmware és "
 "a Repetier G-kód változatokhoz támogatott."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10619,19 +10625,19 @@ msgstr ""
 "A törlőtorony jelenleg csak relatív extruder címzéssel "
 "(use_relative_e_distances=1) támogatott."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "A szivárgásmegelőzés jelenleg nem támogatott, ha a törlőtorony engedélyezve "
 "van."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 "A törlőtorony jelenleg nem támogatja a volumetrikus E-t (use_volumetric_e=0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10639,7 +10645,7 @@ msgstr ""
 "A törlőtorony jelenleg nem támogatott a több anyagos szekvenciális nyomatok "
 "esetében."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10647,7 +10653,7 @@ msgstr ""
 "A törlőtorony csak akkor támogatott több objektum nyomtatásához, ha azok "
 "azonos rétegmagassággal rendelkeznek"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10655,7 +10661,7 @@ msgstr ""
 "A törlőtorony csak akkor támogatott több objektum nyomtatása esetén, ha azok "
 "azonos számú tutaj rétegre vannak nyomtatva"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10663,7 +10669,7 @@ msgstr ""
 "A törlőtorony csak akkor támogatott több objektum esetében, ha azok azonos "
 "support_material_contact_distance paraméterbeálltással vannak nyomtatva"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10671,7 +10677,7 @@ msgstr ""
 "A törlőtorony csak akkor támogatott több objektum esetén, ha azok egyformán "
 "vannak felszeletelve."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10679,27 +10685,27 @@ msgstr ""
 "A törlőtorony csak akkor támogatott, ha minden objektumnak ugyanaz a változó "
 "rétegmagassága"
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Egy vagy több objektumhoz olyan extruder lett hozzárendelve, amely nincs a "
 "nyomtatóban."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 "%1%=%2% mm túl alacsony ahhoz, hogy nyomtatható legyen %3% mm-es "
 "rétegmagasságnál"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 "%1%=%2% mm túl sok ahhoz, hogy nyomtatható legyen %3% mm fúvókaátmérővel"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10711,7 +10717,7 @@ msgstr ""
 "support_material_interface_extruder == 0), akkor minden fúvókának azonos "
 "átmérőjűnek kell lennie."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10719,7 +10725,7 @@ msgstr ""
 "Ahhoz, hogy a törlőtorony működjön az oldható támasztékokkal, a támasztó "
 "rétegeket szinkronizálni kell az objektum rétegeivel."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10731,27 +10737,46 @@ msgstr ""
 "support_material_extruder, mind a support_material_interface_extruder "
 "értékét 0-ra kell állítani)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "Az első réteg magassága nem lehet nagyobb, mint a fúvóka átmérője"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "A réteg magassága nem lehet nagyobb, mint a fúvóka átmérője"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Kitöltő rétegek"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr "Szoknya és karima generálása"
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G-kód exportálása"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G-kód generálása"
 
diff --git a/resources/localization/ko/PrusaSlicer_ko_KR.po b/resources/localization/ko/PrusaSlicer_ko_KR.po
index 698a7880a..a5b40e996 100644
--- a/resources/localization/ko/PrusaSlicer_ko_KR.po
+++ b/resources/localization/ko/PrusaSlicer_ko_KR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2020-02-28 09:34+0900\n"
 "Last-Translator: lee hak-min <hangmini12@naver.com>\n"
 "Language-Team: ulsanether\n"
@@ -572,7 +572,7 @@ msgstr "활동중"
 msgid "PrusaSlicer version"
 msgstr "Prusa슬라이서 버전"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "출력"
 
@@ -580,17 +580,17 @@ msgstr "출력"
 msgid "filaments"
 msgstr "필라멘트"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA 인쇄"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA 재료"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "프린터"
 
@@ -649,7 +649,7 @@ msgstr "표준"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "모두 선택"
 
@@ -736,7 +736,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "필라멘트"
 
@@ -824,7 +824,7 @@ msgstr ""
 "또한 업데이트가 적용되기 전에 전체 구성의 백업 구성(스냅샷)이 생성됩니다."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "디스크에서 다시 불러오기"
 
@@ -1122,7 +1122,7 @@ msgstr "&완료"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "취소"
 
@@ -1186,7 +1186,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1631,8 +1631,8 @@ msgid "parameter name"
 msgstr "매개 변수 명칭"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1833,7 +1833,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "추가"
 
@@ -2035,7 +2035,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "설정"
 
@@ -2302,7 +2302,7 @@ msgid "Add..."
 msgstr "추가..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "전부 지우기"
 
@@ -3183,7 +3183,7 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3192,18 +3192,18 @@ msgstr ""
 "PrusaSlicer 구성 파일을 구문 분석하는 오류, 아마 손상된 것입니다. 파일을 수동"
 "으로 삭제하여 오류에 복구해 보십시오. 사용자 프로필은 영향을 받지 않습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3215,7 +3215,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3224,19 +3224,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3246,53 +3246,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3305,198 +3305,198 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "재현"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "현재 기본 설정을 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "보기 모드를 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "파일(3MF/AMF) 선택:"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "파일을 선택하세요 (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "응용 프로그램 언어 변경"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "언어를 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "언어"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "수정된곳"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "%s 실행"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "구성 스냅샷"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "구성 스냅 샷 검사 / 활성화"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "구성 스냅 샷 가져 오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "구성 스냅 샷 캡처"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "구성 업데이트 확인"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "환경 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "응용 프로그램 환경 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "단순"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "기본 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "고급 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "전문가"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "전문가 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "아두이노 기반의 프린터 이미지 업로드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "스냅 샷 이름"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "국가에 맞는 언어를 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3504,93 +3504,93 @@ msgstr ""
 "언어를 전환 하면 응용 프로그램 재시작 합니다. 플레이트 위 객체(object)는 모"
 "두 지워집니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "계속 하시겠습니까?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&구성"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "SLA 방식을 사용 하여 다중 객체(object)를 인쇄할 수는 없습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "사전 설정을 변경 하기 전에 객체(object) 목록을 확인 하십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "gcode 파일 선택:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3696,7 +3696,7 @@ msgstr "스커트와 브림"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3706,7 +3706,7 @@ msgid "Advanced"
 msgstr "고급"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3720,8 +3720,8 @@ msgid "Supports"
 msgstr "서포트"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3731,8 +3731,8 @@ msgstr "서포트"
 msgid "Pad"
 msgstr "패드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3835,7 +3835,7 @@ msgstr "STL로 내보내기"
 msgid "Reload the selected volumes from disk"
 msgstr "디스크에서 선택한 볼륨 다시 로드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3861,19 +3861,19 @@ msgstr "인쇄 볼륨에 따라 배율 조정"
 msgid "Scale the selected object to fit the print volume"
 msgstr "인쇄 볼륨에 맞게 선택한 객체(object)의 배율 조정"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4127,7 +4127,7 @@ msgstr ""
 msgid "Loading"
 msgstr "로딩"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4552,7 +4552,7 @@ msgstr "매개 변수 제거"
 msgid "Delete Option %s"
 msgstr "삭제 %s 옵션"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "옵션 %s 변경"
@@ -4671,18 +4671,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4844,12 +4844,12 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 "배드에 여러 부분으로 구성된 객체가 있는 SLA 프로젝트를 로드할 수 없습니다."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "주목!"
 
@@ -4890,11 +4890,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "G-code 내보내기"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "G-code 보내기"
 
@@ -5275,7 +5275,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "미리보기"
@@ -5387,29 +5387,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "출력 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "재질 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "필라멘트 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "프린터 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5919,7 +5919,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6028,9 +6028,9 @@ msgstr "G 코드"
 msgid "Save zip file as:"
 msgstr "압축(zip)파일 다른이름 저장:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "슬라이싱"
 
@@ -6286,7 +6286,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6312,8 +6312,8 @@ msgstr "복제본"
 msgid "Instance %d"
 msgstr "복제본 %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "레이어"
 
@@ -6575,12 +6575,12 @@ msgstr "개체 아래"
 msgid "Around object"
 msgstr "개체 주위"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "프린터로 보내기"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "바로 슬라이스"
 
@@ -6685,7 +6685,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "새로운 프로젝트"
 
@@ -6693,7 +6693,7 @@ msgstr "새로운 프로젝트"
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6702,12 +6702,12 @@ msgid_plural ""
 "PrusaSlicer"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6717,11 +6717,11 @@ msgid_plural ""
 "These objects have been removed from the model"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6733,15 +6733,15 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6753,29 +6753,29 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "다중 부품(Part) 객체(object)가 감지"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 "이 파일은 기본 모드에서 로드할 수 없습니다. 고급 모드로 전환 하시겠습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "감지된 고급 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6784,7 +6784,7 @@ msgstr ""
 "다중 부품(Part) 하나 또는 그 중 일부 때문에 %s에서 객체(object)를 추가 할 수 "
 "없습니다"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -6794,145 +6794,145 @@ msgstr ""
 "여러 객체(object)로 간주하는 대신,\n"
 "이 파일들은 여러 부분을 갖는 단일 객체(object)를 나타낼 수 있습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr "객체(object)가 너무 커서 인쇄물에 맞게 자동으로 축소되었습니다."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "객체(object)가 너무 큽니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "STL 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "AMF 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "다른 이름으로 파일 저장:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "OBJ 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "객체(object) 지우기"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "프로젝트 재설정"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "객체(object)로 분할"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "잘못 된 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "다른 내보내기 작업이 현재 실행 중입니다."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "다시 로드할 파일을 선택하십시오."
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "다시 로드할 수 없음:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "다시 로드하는 동안 오류"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "디스크에서 모두 다시 로드"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D 편집화면 보기"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6940,171 +6940,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "프로젝트 불러오기"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "객체(object) 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "객체(object) 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "파일 로드"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "파일 로드"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "모든 객체(object)가 제거 됩니다, 계속합니까?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "선택한 객체(object) 삭제"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "복제본 늘리기"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "복제본 감소"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "복사본 수를 %d로 설정"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "평면으로 절단"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G-code 파일 다른 이름 저장:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "내보내기"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "클립보드에서 붙여넣기"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "일반"
 
@@ -7235,7 +7235,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7249,7 +7249,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7260,7 +7260,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7775,11 +7775,11 @@ msgstr "프린터 호스트로 G 코드 보내기"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "다음 파일 이름으로 프린터 호스트에 업로드:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "필요한 경우 디렉토리 분리 기호로 슬래시 (/)를 사용하십시오."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7788,18 +7788,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "아이디"
@@ -8237,7 +8237,7 @@ msgstr "전체 프로필 이름"
 msgid "symbolic profile name"
 msgstr "기호 프로파일 이름"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "레이어 및 둘레"
 
@@ -8321,11 +8321,11 @@ msgstr "겹침(Overlap)"
 msgid "Flow"
 msgstr "유량(Flow)"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "그 외"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "출력 옵션"
 
@@ -8337,11 +8337,11 @@ msgstr "연속 인쇄"
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "출력 파일"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "사후 처리 스크립트"
 
@@ -8349,19 +8349,20 @@ msgstr "사후 처리 스크립트"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "메모"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "속한 그룹"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "프로파일 속한곳"
 
@@ -8435,7 +8436,7 @@ msgid "Ramming settings"
 msgstr "래밍 설정"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "수동 G코드"
@@ -8473,8 +8474,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "크기와 좌표"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "기능"
 
@@ -8542,11 +8543,11 @@ msgstr "기울이기"
 msgid "Tilt time"
 msgstr "기울이기 시간"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "수정"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "노출"
 
@@ -8702,70 +8703,74 @@ msgstr "선택한 사전 설정의 %1%를 선택 하시겠습니까?"
 msgid "%1% Preset"
 msgstr "%1% 기본설정"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "설정"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "찾기"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "전체 단어 일치"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "잠긴 잠금"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 "설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "잠금 해제 잠금"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8777,12 +8782,12 @@ msgstr ""
 "잠금 해제 잠금 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 시스템(또"
 "는 기본값) 값으로 재설정합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "흰색 글머리 기호"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -8790,12 +8795,12 @@ msgstr ""
 "왼쪽 단추의 경우: 비시스템(또는 기본이 아닌) 사전 설정을 나타냅니다.\n"
 "오른쪽 버튼: 설정이 수정되지 않았음을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "돌아가기 화살표"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8807,7 +8812,7 @@ msgstr ""
 "현재 옵션 그룹의 모든 설정을 시스템 값으로 재설정하려면 자물쇠 잠금 아이콘을 "
 "클릭하십시오."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -8815,7 +8820,7 @@ msgstr ""
 "LOCKED LOCK 아이콘은 설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하"
 "다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8827,11 +8832,11 @@ msgstr ""
 "현재 옵션 그룹에 대한 모든 설정을 시스템(또는 기본값) 값으로 재설정하려면 클"
 "릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "WHITE BULLET 아이콘은 시스템 사전 설정이 아닌 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -8839,7 +8844,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
 "전 설정과 동일 하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8851,7 +8856,7 @@ msgstr ""
 "마지막 현재 옵션 그룹에 대 한 모든 설정 다시 설정을 클릭 하 여 사전 설정을 저"
 "장."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -8859,7 +8864,7 @@ msgstr ""
 "LOCKED LOCK 아이콘은 값이 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니"
 "다."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -8869,7 +8874,7 @@ msgstr ""
 "을 나타냅니다.\n"
 "현재 값을 시스템(또는 기본값) 값으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -8877,7 +8882,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 마지막으로 저장 한 사전 설정과 동일한 값을 나타냅"
 "니다."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -8887,105 +8892,105 @@ msgstr ""
 "을 나타냅니다.\n"
 "현재 값을 마지막으로 저장된 사전 설정으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "재료"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "서포트 헤드"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "서포트 기둥"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "서포트 기둥 및 접합부 연결"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "자동 생성"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "객체(object) 고도"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "개체 주위패드"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "미 저장된 변경점"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "저장"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -8993,120 +8998,121 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9912,32 +9918,32 @@ msgstr "유효성 검사 실패"
 msgid "write calledback failed"
 msgstr "쓰기 다시 실패"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "모든 객체(object)가 인쇄 볼륨 외부에 있습니다."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "제공된 설정으로 인해 빈 인쇄가 발생합니다."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 "일부 객체(object)가 너무 가깝습니다. 귀하의 압출기가 그들과 충돌합니다."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "일부 객체(object)는 너무 크고 익스트루더 충돌없이 인쇄 할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -9945,7 +9951,7 @@ msgstr ""
 "나선형 꽃병 옵션(Spiral Vase)은 단일 재료 객체(object)를 인쇄 할 때만 사용할 "
 "수 있습니다."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -9953,13 +9959,13 @@ msgstr ""
 "모든 압출기 의 노즐 직경이 동일하고 동일한 직경의 필라멘트를 사용하는 경우에"
 "만 와이프 타워가 지원됩니다."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -9967,24 +9973,24 @@ msgstr ""
 "와이프 타워는 현재 상대적 압출기 어드레싱 (use_relative_e_distances = 1)에서"
 "만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "현재 와이프 타워를 사용하도록 설정되어 있는 경우 스모즈 방지 기능이 지원되지 "
 "않습니다."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr "와이프 타워는 현재 볼륨 E(use_volumetric_e=0)를 지원하지 않습니다."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr "와이프 타워는 현재 다중 재질 순차 인쇄에 지원되지 않습니다."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -9992,7 +9998,7 @@ msgstr ""
 "와이프 타워 (Wipe Tower)는 같은 레이어 높이에 경우 여러 객체(object)에 대해서"
 "만 지원됩니다"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10000,7 +10006,7 @@ msgstr ""
 "와이프 타워는 같은 수의 라프트 레이어 위에 인쇄 된 경우 여러 객체(object)에 "
 "대해서만 지원됩니다"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10008,7 +10014,7 @@ msgstr ""
 "와이프 타워는 동일한 support_material_contact_distance로 인쇄 된 경우 여러 객"
 "체(object)에 대해서만 지원됩니다"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10016,29 +10022,29 @@ msgstr ""
 "와이프 타워는 똑같이 슬라이스 된 경우 여러 객체(object)에 대해서만 지원됩니"
 "다."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 "모든 오브젝트의 가변 레이어 높이가 같은 경우에만 지우기 타워가 지원됩니다."
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "하나 이상의 객체(object)에 프린터에없는 압출기가 지정되었습니다."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm가 너무 낮아 레이어 높이 %3% mm에서 인쇄할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "노즐 직경 %3% mm로 인쇄할 수 있는 과도한 %1%=%2% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10049,7 +10055,7 @@ msgstr ""
 "(support_material_extruder == 0 또는 support_material_interface_extruder == "
 "0)로 인쇄되는 경우 모든 노즐은 동일한 지름이어야합니다."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10057,7 +10063,7 @@ msgstr ""
 "와이프 타워가 가용성 지지체와 함께 작동 하려면 서포트 레이어를 객체(object) "
 "레이어와 동기화 해야 합니다."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10068,27 +10074,46 @@ msgstr ""
 "에만 비가용성 서포트를 지원 합니다. (support_material_extruder과 "
 "support_material_interface_extruder 모두 0으로 설정 해야 합니다.)"
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "첫번째 레이어 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "레이어 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "레이어 채우기"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G 코드 내보내기"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G 코드 생성"
 
diff --git a/resources/localization/ko_KR/PrusaSlicer_ko.po b/resources/localization/ko_KR/PrusaSlicer_ko.po
index c7207eada..3e2ae505b 100644
--- a/resources/localization/ko_KR/PrusaSlicer_ko.po
+++ b/resources/localization/ko_KR/PrusaSlicer_ko.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-04-05 21:03+0900\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -587,7 +587,7 @@ msgstr "활성"
 msgid "PrusaSlicer version"
 msgstr "프라사슬라이서 버전"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "출력"
 
@@ -595,17 +595,17 @@ msgstr "출력"
 msgid "filaments"
 msgstr "필 라 멘 트"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA 프린트"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA 재료"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "프린터"
 
@@ -664,7 +664,7 @@ msgstr "표준"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "모두"
 
@@ -751,7 +751,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "필라멘트 설정을 선택"
 
@@ -839,7 +839,7 @@ msgstr ""
 "또한 업데이트가 적용되기 전에 전체 구성의 백업 구성(스냅샷)이 생성됩니다."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "디스크에서 재장전"
 
@@ -1143,7 +1143,7 @@ msgstr "완료(&Finish)"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "취소"
 
@@ -1207,7 +1207,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1675,8 +1675,8 @@ msgid "parameter name"
 msgstr "매개 변수 명칭"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1879,7 +1879,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "추가"
 
@@ -2081,7 +2081,7 @@ msgid "Wipe"
 msgstr "와이프(wipe) 탑의 최소 퍼지"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "옵션"
 
@@ -2348,7 +2348,7 @@ msgid "Add..."
 msgstr "더하기..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "모두 삭제"
 
@@ -3252,7 +3252,7 @@ msgstr "중요 오류"
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3261,7 +3261,7 @@ msgstr ""
 "PrusaSlicer 구성 파일을 구문 분석하는 오류, 아마 손상된 것입니다. 파일을 수동"
 "으로 삭제하여 오류에 복구해 보십시오. 사용자 프로필은 영향을 받지 않습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3269,12 +3269,12 @@ msgstr ""
 "오류 구문 분석 PrusaGCodeViewer 컨피그 파일, 그것은 아마 손상. 오류를 복구하"
 "기 위해 파일을 수동으로 삭제해 봅보십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3286,7 +3286,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3295,19 +3295,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3317,7 +3317,7 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3326,46 +3326,46 @@ msgstr ""
 "%s\n"
 "계속하시겠습니까?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "선택 기억"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "로딩 구성"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "릴리스 페이지를 참조하십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "설정 탭 준비"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3378,23 +3378,23 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "\"인쇄 호스트 업로드\"에 대한 저장된 옵션이 있는 다음 사전 설정이 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3404,7 +3404,7 @@ msgstr ""
 "지 않습니다.\n"
 "설정은 실제 프린터 설정에서 사용할 수 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3413,169 +3413,169 @@ msgstr ""
 "기본적으로 새 프린터 장치는 생성 중에 \"프린터 N\"으로 지정됩니다.\n"
 "참고: 이 이름은 나중에 실제 프린터 설정에서 변경할 수 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "정보"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "재현"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "현재 기본 설정을 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "보기 모드를 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "파일(3MF/AMF) 선택:"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "파일을 선택하세요 (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "하나의 파일(GCODE/)을 선택합니다. GCO/. G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "응용 프로그램 언어 변경"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "언어 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "언어"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "변경"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "%s 실행하기"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&구성 스냅샷"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "구성 스냅숏 검사/활성화"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "구성 및 스냅샷 찍기"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "구성 스냅샷 캡처"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "구성 업데이트 확인"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "기본 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "응용 프로그램 기본 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "단순"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "기본 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "고급"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "고급 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "전문가"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "전문가 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "언어(&L)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "아두이노 기반 프린터에 펌웨어 이미지 업로드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "스냅샷 이름"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "구성 스냅숏을 활성화하지 못했습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "언어 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3583,93 +3583,93 @@ msgstr ""
 "언어를 전환 하면 응용 프로그램 재시작 합니다. 플레이트 위 오브젝트는 모두 지"
 "워집니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "계속 하시겠습니까?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "구성 노트"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "업로드는 여전히 진행 중입니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "그들을 중지하고 어쨌든 계속?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "지속적인 업로드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "SLA 방식을 사용 하여 다중 객체를 인쇄할 수는 없습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "미리 설정하기 전에 개체 목록을 확인하십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "gcode 파일을 선택합니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "브라우저에서 하이퍼링크를 열도록 억제"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "프라사슬라이스: 다시 물어보지 마세요."
 
@@ -3775,7 +3775,7 @@ msgstr "스커트와 브림"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3785,7 +3785,7 @@ msgid "Advanced"
 msgstr "고급"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3799,8 +3799,8 @@ msgid "Supports"
 msgstr "서포트"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3810,8 +3810,8 @@ msgstr "서포트"
 msgid "Pad"
 msgstr "패드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3914,7 +3914,7 @@ msgstr "STL로 수출"
 msgid "Reload the selected volumes from disk"
 msgstr "디스크에서 선택한 볼륨 다시 로드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3940,19 +3940,19 @@ msgstr "볼륨 인쇄배율 조정"
 msgid "Scale the selected object to fit the print volume"
 msgstr "인쇄 볼륨에 맞게 선택한 객체의 배율 조정"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "제국 단위에서 변환"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "제국 단위에서 변환을 되돌리기"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4206,7 +4206,7 @@ msgstr ""
 msgid "Loading"
 msgstr "로딩중"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "파일 로드"
 
@@ -4637,7 +4637,7 @@ msgstr "매개 변수 제거"
 msgid "Delete Option %s"
 msgstr "삭제 %s 옵션"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "변경 옵션 %s"
@@ -4756,18 +4756,18 @@ msgstr "공구 마커"
 msgid "Legend/Estimated printing time"
 msgstr "범례/예상 인쇄 시간"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "더 보기"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4927,11 +4927,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr "침대에 다중 부품 오브젝트가 있는 SLA 프로젝트를 로드할 수 없습니다."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "주의!"
 
@@ -4972,11 +4972,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "ini/amf/3mf/gcode에서 구성을 로드하고 병합"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "G코드 내보내기"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "G-code 보내기"
 
@@ -5363,7 +5363,7 @@ msgstr "범례 표시/숨기기 및 예상 인쇄 시간"
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "미리보기"
@@ -5480,29 +5480,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "출력 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "재질 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "필라멘트 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "프린터 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -6014,7 +6014,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6124,9 +6124,9 @@ msgstr "%1%로 내보낸 G 코드 파일"
 msgid "Save zip file as:"
 msgstr "압축(zip)파일 다른이름 저장:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "새로운 슬라이싱 작업 시작"
 
@@ -6385,7 +6385,7 @@ msgstr "오류:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "경고"
 
@@ -6411,8 +6411,8 @@ msgstr "적용"
 msgid "Instance %d"
 msgstr "인스턴스 %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "레이어"
 
@@ -6678,12 +6678,12 @@ msgstr "아래 개체"
 msgid "Around object"
 msgstr "개체 주변"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "프린터로 보내기"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "바로 슬라이스"
 
@@ -6790,7 +6790,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "장치 %s(%s)의 배출이 실패했습니다."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "새로운 프로젝트"
 
@@ -6798,7 +6798,7 @@ msgstr "새로운 프로젝트"
 msgid "Expand sidebar"
 msgstr "사이드바 확장"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6807,12 +6807,12 @@ msgid_plural ""
 "PrusaSlicer"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6822,11 +6822,11 @@ msgid_plural ""
 "These objects have been removed from the model"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6838,15 +6838,15 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6858,29 +6858,29 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "다중 부품 객체가 감지"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 "이 파일은 간단한 모드로 로드할 수 없습니다. 고급 모드로 전환하시겠습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "감지된 고급 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6889,7 +6889,7 @@ msgstr ""
 "다중 부품(Part) 하나 또는 그 중 일부 때문에 %s에서 객체(object)를 추가 할 수 "
 "없습니다"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -6899,145 +6899,145 @@ msgstr ""
 "여러 객체(object)로 간주하는 대신,\n"
 "이 파일들은 여러 부분을 갖는 단일 객체(object)를 나타낼 수 있습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr "개체가 너무 커서 인쇄물에 맞게 자동으로 축소되었습니다."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "개체가 너무 큽니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "STL 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "AMF 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "파일을 다음과 같이 저장"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "OBJ 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "오브젝트 지우기"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "프로젝트 재설정"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "오브젝트별 분할"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "잘못된 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "다른 내보내기 작업이 현재 실행 중입니다."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "다시 로드할 파일을 선택하십시오."
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "선택한 파일"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "다음에서 다시 로드됩니다."
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "다시 로드할 수 없습니다."
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "다시 로드하는 동안 오류"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "디스크에서 모두 다시 로드 "
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "슬라이스 모델에 대한 활성 경고가 있습니다."
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "생성된 경고"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D 편집기 보기"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7045,171 +7045,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "프로젝트 불러오기"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "개체 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "가져오기 개체"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "유효한 gcode가 포함되어 있지 않습니다."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ".gcode 파일을 로드하는 동안 오류"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - 프로젝트 파일 삭제"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "&프로젝트 열기"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "형상 가져오기만"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "구성만 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "파일에 적용할 작업 선택"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "실행"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "다시 보지 않기"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "한 번에 하나의 .gcode 파일만 열 수 있습니다."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "G 코드 파일 드래그 및 드롭"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "로드 파일"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "파일 로드"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "모든 개체가 제거되고 계속되나요?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "선택한 개체 삭제"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "인스턴스 증가"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "인스턴스 감소"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "사본 수를 입력합니다."
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "선택한 개체의 복사본"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "복사본 수를 %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "평면으로 절단"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G-code 파일 다른 이름 저장:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "내보내기"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "클립보드에서 붙여넣기"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "일반"
 
@@ -7350,7 +7350,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7364,7 +7364,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7375,7 +7375,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7899,11 +7899,11 @@ msgstr "프린터 호스트에 G 코드 보내기"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "다음 파일 이름으로 프린터 호스트에 업로드:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "필요한 경우 디렉토리 분리 기호로 슬래시  (/ ) 를 사용하십시오."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "그룹"
 
@@ -7912,18 +7912,18 @@ msgstr "그룹"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8365,7 +8365,7 @@ msgstr "전체 프로필 이름"
 msgid "symbolic profile name"
 msgstr "기호 프로필 이름"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "레이어 및 둘레"
 
@@ -8452,11 +8452,11 @@ msgstr "오버랩"
 msgid "Flow"
 msgstr "흐름도"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "기타"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "출력 옵션"
 
@@ -8468,11 +8468,11 @@ msgstr "순차적 인쇄"
 msgid "Extruder clearance"
 msgstr "압출기 클리어런스"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "출력 파일"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "포스트 프로세싱 스크립트"
 
@@ -8480,19 +8480,20 @@ msgstr "포스트 프로세싱 스크립트"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "메모"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "종속성"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "프로파일 속한곳"
 
@@ -8566,7 +8567,7 @@ msgid "Ramming settings"
 msgstr "래밍 설정"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "사용자 지정 G 코드"
@@ -8612,8 +8613,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "크기 및 좌표"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "권한"
 
@@ -8681,11 +8682,11 @@ msgstr "기울이기"
 msgid "Tilt time"
 msgstr "기울이기 시간"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "수정"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "최소 노출 시간"
 
@@ -8841,40 +8842,44 @@ msgstr "선택한 사전 설정의 %1%를 선택 하시겠습니까?"
 msgid "%1% Preset"
 msgstr "%1% 기본설정"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "설정"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "찾기"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "전체 단어 일치"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr "기계 제한은 G 코드로 방출되고 인쇄 시간을 예측하는 데 사용됩니다."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -8884,26 +8889,26 @@ msgstr ""
 "는 데 사용됩니다, 따라서 프린터가 기계 제한의 다른 세트를 적용 할 수 있으므"
 "로 정확하지 않을 수 있습니다."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 "기계 제한이 설정되지 않으므로 인쇄 시간 추정치가 정확하지 않을 수 있습니다."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "잠긴 잠금"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 "설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 "UNLOCKED LOCK 아이콘은 일부 설정이 변경되었으며 현재 옵션 그룹의 시스템(또는 "
@@ -8912,7 +8917,7 @@ msgstr ""
 "릭합니다."
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8924,14 +8929,14 @@ msgstr ""
 "잠금 해제 된 LOCK 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 시스템 "
 "(또는 기본값) 값으로 재설정합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 "WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
 "전 설정과 동일 하다는 것을 나타냅니다."
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -8939,12 +8944,12 @@ msgstr ""
 "왼쪽 단추의 경우: 비시스템(또는 비기본적) 사전 설정을 나타내고,\n"
 "오른쪽 단추: 설정이 수정되지 않았음을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "돌아가기 화살표"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8956,7 +8961,7 @@ msgstr ""
 "뒤로 화살표 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 마지막으로 저"
 "장된 사전 설정으로 재설정합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -8964,7 +8969,7 @@ msgstr ""
 "잠긴 LOCK 아이콘은 설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다"
 "는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8976,11 +8981,11 @@ msgstr ""
 "현재 옵션 그룹에 대한 모든 설정을 시스템(또는 기본값) 값으로 재설정하려면 클"
 "릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "WHITE BULLET 아이콘은 시스템 사전 설정이 아닌 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -8988,7 +8993,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
 "전 설정과 동일 하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9000,14 +9005,14 @@ msgstr ""
 "마지막 현재 옵션 그룹에 대 한 모든 설정 다시 설정을 클릭 하 여 사전 설정을 저"
 "장."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 "LOCK 아이콘잠기는 값이 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9017,7 +9022,7 @@ msgstr ""
 "을 나타냅니다.\n"
 "현재 값을 시스템(또는 기본값) 값으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9025,7 +9030,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 마지막으로 저장 한 사전 설정과 동일한 값을 나타냅"
 "니다."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9035,31 +9040,31 @@ msgstr ""
 "음을 나타냅니다.\n"
 "현재 값을 마지막 저장된 사전 설정으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "재료"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "서포트 헤드"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "서포트 기둥"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "서포트 기둥 및 접합부 연결"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "자동 생성"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9068,74 +9073,74 @@ msgstr ""
 "\"%1%\"는 \"%3%\" 범주에 있기 때문에 \"%2% %1%\"이 비활성화됩니다.\n"
 "\"%1%\"을 활성화하려면 \"%2%\"을 끄십시오."
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "객체 고도"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "물체 주위의 패드"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Undef"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "사전 설정 전환: 저장되지 않은 변경 사항"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "이전 값"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "새 값"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "전송하기"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "무시\t"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "저장"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9143,11 +9148,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "프라사슬라이스러는 당신의 행동을 기억할 것입니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9156,55 +9161,56 @@ msgstr ""
 "\"기본 설정\"을 방문하여 \"%1%\"을 확인하십시오.\n"
 "저장되지 않은 변경 사항에 대해 다시 묻는 것입니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "일부 필드는 너무 길기 때문에 적합합니다. 마우스 오른쪽 클릭으로 전체 텍스트"
 "가 드러납니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "모든 설정 변경 내용은 삭제됩니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "선택한 옵션을 저장합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr "선택한 설정을 새로 선택한 사전 설정으로 전송합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "선택한 옵션을 저장하여 \"%1%\"을 미리 설정합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr "선택한 옵션을 새로 선택한 사전 설정된 \"%1%\"로 전송합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 "사전 설정된 \"%1%\"에는 다음과 같은 저장되지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9213,7 +9219,7 @@ msgstr ""
 "사전 설정된 \"%1%\"은 새 프린터 프로필과 호환되지 않으며 다음과 같은 저장되"
 "지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9222,50 +9228,50 @@ msgstr ""
 "사전 설정된 \"%1%\"은 새 인쇄 프로파일과 호환되지 않으며 다음과 같은 저장되"
 "지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "압출기 수"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -10075,24 +10081,24 @@ msgstr "유효성 검사 실패"
 msgid "write calledback failed"
 msgstr "쓰기 호출 백 실패"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "모든 개체가 인쇄 볼륨 외부에 있습니다."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "제공된 설정으로 인해 빈 인쇄가 발생합니다."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "일부 개체가 너무 가깝습니다. 귀하의 압출기가 그들과 충돌합니다."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "일부 개체는 너무 크고 익스트루더 충돌없이 인쇄 할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10102,7 +10108,7 @@ msgstr ""
 "를 제외한 모든 개체를 제거하거나 \"complete_objects\"하여 순차 모드를 사용하"
 "도록 설정합니다."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -10110,7 +10116,7 @@ msgstr ""
 "나선형 꽃병 옵션(Spiral Vase)은 단일 재료 객체를 인쇄 할 때만 사용할 수 있습"
 "니다."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10118,7 +10124,7 @@ msgstr ""
 "와이프 타워는 모든 압출기직경이 동일하고 동일한 직경의 필라멘트를 사용하는 경"
 "우에만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10126,7 +10132,7 @@ msgstr ""
 "와이프 타워는 현재 말린, RepRap / 단거리, RepRapFirmware 및 Repetier G 코드 "
 "맛에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10134,29 +10140,29 @@ msgstr ""
 "와이프 타워는 현재 상대적 압출기 어드레싱 (use_relative_e_distances=1)에서만 "
 "지원됩니다."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr "현재 활성화된 와이프 타워로는 Ooze 방지가 지원되지 않습니다."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr "와이프 타워는 현재 볼륨 E(use_volumetric_e=0)를 지원하지 않습니다."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr "와이프 타워는 현재 다중 재료 순차 인쇄에 대해 지원되지 않습니다."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 "와이프 타워는 레이어 높이가 동일한 경우에만 여러 개체에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10164,7 +10170,7 @@ msgstr ""
 "와이프 타워는 같은 수의 라프트 레이어 위에 인쇄 된 경우 여러 객체에 대해서만 "
 "지원됩니다"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10172,14 +10178,14 @@ msgstr ""
 "와이프 타워는 동일한 support_material_contact_distance로 인쇄 된 경우 여러 객"
 "체에 대해서만 지원됩니다"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 "와이프 타워는 똑같이 슬라이스 된 경우 여러 오브젝트에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10187,22 +10193,22 @@ msgstr ""
 "지우기 타워는 모든 오브젝트가 동일한 가변 레이어 높이를 갖는 경우에만 지원됩"
 "니다."
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "하나 이상의 개체에 프린터에없는 압출기가 지정되었습니다."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm가 너무 낮아 레이어 높이%3% mm에서 인쇄할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "노즐 직경 %3% mm로 인쇄할 수 있는 과도한 %1%=%2% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10213,7 +10219,7 @@ msgstr ""
 "(support_material_extruder == 0 or support_material_interface_extruder == 0)"
 "로 인쇄되는 경우 모든 노즐은 동일한 지름이어야합니다."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10221,7 +10227,7 @@ msgstr ""
 "와이프 타워가 가용성 지지체와 함께 작동 하려면 서포트 레이어를 오브젝트 레이"
 "어와 동기화 해야 합니다."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10232,27 +10238,46 @@ msgstr ""
 "에만 비가용성 서포트를 지원 합니다. (support_material_extruder과 "
 "support_material_interface_extruder 모두 0으로 설정 해야 합니다.)"
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "첫번째 레이어의 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "레이어 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "레이어 채우기"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G코드 내보내기"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G 코드 생성"
 
diff --git a/resources/localization/ko_KR/PrusaSlicer_ko_KR.po b/resources/localization/ko_KR/PrusaSlicer_ko_KR.po
index 778985524..20b852373 100644
--- a/resources/localization/ko_KR/PrusaSlicer_ko_KR.po
+++ b/resources/localization/ko_KR/PrusaSlicer_ko_KR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-04-04 22:15+0900\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -587,7 +587,7 @@ msgstr "활성"
 msgid "PrusaSlicer version"
 msgstr "프라사슬라이서 버전"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "출력"
 
@@ -595,17 +595,17 @@ msgstr "출력"
 msgid "filaments"
 msgstr "필 라 멘 트"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA 프린트"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA 재료"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "프린터"
 
@@ -664,7 +664,7 @@ msgstr "표준"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "모두"
 
@@ -751,7 +751,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "필라멘트 설정을 선택"
 
@@ -839,7 +839,7 @@ msgstr ""
 "또한 업데이트가 적용되기 전에 전체 구성의 백업 구성(스냅샷)이 생성됩니다."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "디스크에서 재장전"
 
@@ -1143,7 +1143,7 @@ msgstr "완료(&Finish)"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "취소"
 
@@ -1207,7 +1207,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1675,8 +1675,8 @@ msgid "parameter name"
 msgstr "매개 변수 명칭"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1879,7 +1879,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "추가"
 
@@ -2081,7 +2081,7 @@ msgid "Wipe"
 msgstr "와이프(wipe) 탑의 최소 퍼지"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "옵션"
 
@@ -2348,7 +2348,7 @@ msgid "Add..."
 msgstr "더하기..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "모두 삭제"
 
@@ -3252,7 +3252,7 @@ msgstr "중요 오류"
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3261,7 +3261,7 @@ msgstr ""
 "PrusaSlicer 구성 파일을 구문 분석하는 오류, 아마 손상된 것입니다. 파일을 수동"
 "으로 삭제하여 오류에 복구해 보십시오. 사용자 프로필은 영향을 받지 않습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3269,12 +3269,12 @@ msgstr ""
 "오류 구문 분석 PrusaGCodeViewer 컨피그 파일, 그것은 아마 손상. 오류를 복구하"
 "기 위해 파일을 수동으로 삭제해 봅보십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3286,7 +3286,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3295,19 +3295,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3317,7 +3317,7 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3326,46 +3326,46 @@ msgstr ""
 "%s\n"
 "계속하시겠습니까?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "선택 기억"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "로딩 구성"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "릴리스 페이지를 참조하십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "설정 탭 준비"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3378,23 +3378,23 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "\"인쇄 호스트 업로드\"에 대한 저장된 옵션이 있는 다음 사전 설정이 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3404,7 +3404,7 @@ msgstr ""
 "지 않습니다.\n"
 "설정은 실제 프린터 설정에서 사용할 수 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3413,169 +3413,169 @@ msgstr ""
 "기본적으로 새 프린터 장치는 생성 중에 \"프린터 N\"으로 지정됩니다.\n"
 "참고: 이 이름은 나중에 실제 프린터 설정에서 변경할 수 있습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "정보"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "재현"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "현재 기본 설정을 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "보기 모드를 불러오기"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "파일(3MF/AMF) 선택:"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "파일을 선택하세요 (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "하나의 파일(GCODE/)을 선택합니다. GCO/. G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "응용 프로그램 언어 변경"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "언어 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "언어"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "변경"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "%s 실행하기"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&구성 스냅샷"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "구성 스냅숏 검사/활성화"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "구성 및 스냅샷 찍기"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "구성 스냅샷 캡처"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "구성 업데이트 확인"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "기본 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "응용 프로그램 기본 설정"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "단순"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "기본 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "고급"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "고급 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "전문가"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "전문가 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s 보기 모드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "언어(&L)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "아두이노 기반 프린터에 펌웨어 이미지 업로드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "스냅샷 이름"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "구성 스냅숏을 활성화하지 못했습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "언어 선택"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3583,93 +3583,93 @@ msgstr ""
 "언어를 전환 하면 응용 프로그램 재시작 합니다. 플레이트 위 오브젝트는 모두 지"
 "워집니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "계속 하시겠습니까?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "구성 노트"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "업로드는 여전히 진행 중입니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "그들을 중지하고 어쨌든 계속?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "지속적인 업로드"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "SLA 방식을 사용 하여 다중 객체를 인쇄할 수는 없습니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "미리 설정하기 전에 개체 목록을 확인하십시오."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "gcode 파일을 선택합니다."
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "브라우저에서 하이퍼링크를 열도록 억제"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "프라사슬라이스: 다시 물어보지 마세요."
 
@@ -3775,7 +3775,7 @@ msgstr "스커트와 브림"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3785,7 +3785,7 @@ msgid "Advanced"
 msgstr "고급"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3799,8 +3799,8 @@ msgid "Supports"
 msgstr "서포트"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3810,8 +3810,8 @@ msgstr "서포트"
 msgid "Pad"
 msgstr "패드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3914,7 +3914,7 @@ msgstr "STL로 수출"
 msgid "Reload the selected volumes from disk"
 msgstr "디스크에서 선택한 볼륨 다시 로드"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3940,19 +3940,19 @@ msgstr "볼륨 인쇄배율 조정"
 msgid "Scale the selected object to fit the print volume"
 msgstr "인쇄 볼륨에 맞게 선택한 객체의 배율 조정"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "제국 단위에서 변환"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "제국 단위에서 변환을 되돌리기"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4206,7 +4206,7 @@ msgstr ""
 msgid "Loading"
 msgstr "로딩중"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "파일 로드"
 
@@ -4637,7 +4637,7 @@ msgstr "매개 변수 제거"
 msgid "Delete Option %s"
 msgstr "삭제 %s 옵션"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "변경 옵션 %s"
@@ -4756,18 +4756,18 @@ msgstr "공구 마커"
 msgid "Legend/Estimated printing time"
 msgstr "범례/예상 인쇄 시간"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "더 보기"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4927,11 +4927,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr "침대에 다중 부품 오브젝트가 있는 SLA 프로젝트를 로드할 수 없습니다."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "주의!"
 
@@ -4972,11 +4972,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "ini/amf/3mf/gcode에서 구성을 로드하고 병합"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "G코드 내보내기"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "G-code 보내기"
 
@@ -5363,7 +5363,7 @@ msgstr "범례 표시/숨기기 및 예상 인쇄 시간"
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "미리보기"
@@ -5480,29 +5480,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "출력 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "재질 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "필라멘트 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "프린터 설정"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -6014,7 +6014,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6124,9 +6124,9 @@ msgstr "%1%로 내보낸 G 코드 파일"
 msgid "Save zip file as:"
 msgstr "압축(zip)파일 다른이름 저장:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "새로운 슬라이싱 작업 시작"
 
@@ -6385,7 +6385,7 @@ msgstr "오류:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "경고"
 
@@ -6411,8 +6411,8 @@ msgstr "적용"
 msgid "Instance %d"
 msgstr "인스턴스 %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "레이어"
 
@@ -6678,12 +6678,12 @@ msgstr "아래 개체"
 msgid "Around object"
 msgstr "개체 주변"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "프린터로 보내기"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "바로 슬라이스"
 
@@ -6790,7 +6790,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "장치 %s(%s)의 배출이 실패했습니다."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "새로운 프로젝트"
 
@@ -6798,7 +6798,7 @@ msgstr "새로운 프로젝트"
 msgid "Expand sidebar"
 msgstr "사이드바 확장"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6807,12 +6807,12 @@ msgid_plural ""
 "PrusaSlicer"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6822,11 +6822,11 @@ msgid_plural ""
 "These objects have been removed from the model"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6838,15 +6838,15 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6858,29 +6858,29 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "다중 부품 객체가 감지"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 "이 파일은 간단한 모드로 로드할 수 없습니다. 고급 모드로 전환하시겠습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "감지된 고급 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6889,7 +6889,7 @@ msgstr ""
 "다중 부품(Part) 하나 또는 그 중 일부 때문에 %s에서 객체(object)를 추가 할 수 "
 "없습니다"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -6899,145 +6899,145 @@ msgstr ""
 "여러 객체(object)로 간주하는 대신,\n"
 "이 파일들은 여러 부분을 갖는 단일 객체(object)를 나타낼 수 있습니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr "개체가 너무 커서 인쇄물에 맞게 자동으로 축소되었습니다."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "개체가 너무 큽니까?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "STL 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "AMF 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "파일을 다음과 같이 저장"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "OBJ 파일 내보내기:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "오브젝트 지우기"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "프로젝트 재설정"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "오브젝트별 분할"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "잘못된 데이터"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "다른 내보내기 작업이 현재 실행 중입니다."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "다시 로드할 파일을 선택하십시오."
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "선택한 파일"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "다음에서 다시 로드됩니다."
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "다시 로드할 수 없습니다."
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "다시 로드하는 동안 오류"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "디스크에서 모두 다시 로드 "
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "슬라이스 모델에 대한 활성 경고가 있습니다."
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "생성된 경고"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D 편집기 보기"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7045,171 +7045,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "프로젝트 불러오기"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "개체 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "가져오기 개체"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "유효한 gcode가 포함되어 있지 않습니다."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ".gcode 파일을 로드하는 동안 오류"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - 프로젝트 파일 삭제"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "&프로젝트 열기"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "형상 가져오기만"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "구성만 가져오기"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "파일에 적용할 작업 선택"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "실행"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "다시 보지 않기"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "한 번에 하나의 .gcode 파일만 열 수 있습니다."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "G 코드 파일 드래그 및 드롭"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "로드 파일"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "파일 로드"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "모든 개체가 제거되고 계속되나요?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "선택한 개체 삭제"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "인스턴스 증가"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "인스턴스 감소"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "사본 수를 입력합니다."
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "선택한 개체의 복사본"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "복사본 수를 %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "평면으로 절단"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G-code 파일 다른 이름 저장:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "내보내기"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "클립보드에서 붙여넣기"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "일반"
 
@@ -7350,7 +7350,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7364,7 +7364,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7375,7 +7375,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7899,11 +7899,11 @@ msgstr "프린터 호스트에 G 코드 보내기"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "다음 파일 이름으로 프린터 호스트에 업로드:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "필요한 경우 디렉토리 분리 기호로 슬래시  (/ ) 를 사용하십시오."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "그룹"
 
@@ -7912,18 +7912,18 @@ msgstr "그룹"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8365,7 +8365,7 @@ msgstr "전체 프로필 이름"
 msgid "symbolic profile name"
 msgstr "기호 프로필 이름"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "레이어 및 둘레"
 
@@ -8452,11 +8452,11 @@ msgstr "오버랩"
 msgid "Flow"
 msgstr "흐름도"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "기타"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "출력 옵션"
 
@@ -8468,11 +8468,11 @@ msgstr "순차적 인쇄"
 msgid "Extruder clearance"
 msgstr "압출기 클리어런스"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "출력 파일"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "포스트 프로세싱 스크립트"
 
@@ -8480,19 +8480,20 @@ msgstr "포스트 프로세싱 스크립트"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "메모"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "종속성"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "프로파일 속한곳"
 
@@ -8566,7 +8567,7 @@ msgid "Ramming settings"
 msgstr "래밍 설정"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "사용자 지정 G 코드"
@@ -8612,8 +8613,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "크기 및 좌표"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "권한"
 
@@ -8681,11 +8682,11 @@ msgstr "기울이기"
 msgid "Tilt time"
 msgstr "기울이기 시간"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "수정"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "최소 노출 시간"
 
@@ -8841,40 +8842,44 @@ msgstr "선택한 사전 설정의 %1%를 선택 하시겠습니까?"
 msgid "%1% Preset"
 msgstr "%1% 기본설정"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "설정"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "찾기"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "전체 단어 일치"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr "기계 제한은 G 코드로 방출되고 인쇄 시간을 예측하는 데 사용됩니다."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -8884,26 +8889,26 @@ msgstr ""
 "는 데 사용됩니다, 따라서 프린터가 기계 제한의 다른 세트를 적용 할 수 있으므"
 "로 정확하지 않을 수 있습니다."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 "기계 제한이 설정되지 않으므로 인쇄 시간 추정치가 정확하지 않을 수 있습니다."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "잠긴 잠금"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 "설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 "UNLOCKED LOCK 아이콘은 일부 설정이 변경되었으며 현재 옵션 그룹의 시스템(또는 "
@@ -8912,7 +8917,7 @@ msgstr ""
 "릭합니다."
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8924,14 +8929,14 @@ msgstr ""
 "잠금 해제 된 LOCK 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 시스템 "
 "(또는 기본값) 값으로 재설정합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 "WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
 "전 설정과 동일 하다는 것을 나타냅니다."
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -8939,12 +8944,12 @@ msgstr ""
 "왼쪽 단추의 경우: 비시스템(또는 비기본적) 사전 설정을 나타내고,\n"
 "오른쪽 단추: 설정이 수정되지 않았음을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "돌아가기 화살표"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8956,7 +8961,7 @@ msgstr ""
 "뒤로 화살표 아이콘을 클릭하여 현재 옵션 그룹에 대한 모든 설정을 마지막으로 저"
 "장된 사전 설정으로 재설정합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -8964,7 +8969,7 @@ msgstr ""
 "잠긴 LOCK 아이콘은 설정이 현재 옵션 그룹의 시스템(또는 기본값) 값과 동일하다"
 "는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8976,11 +8981,11 @@ msgstr ""
 "현재 옵션 그룹에 대한 모든 설정을 시스템(또는 기본값) 값으로 재설정하려면 클"
 "릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "WHITE BULLET 아이콘은 시스템 사전 설정이 아닌 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -8988,7 +8993,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 설정이 현재 옵션 그룹에 대해 마지막으로 저장 된 사"
 "전 설정과 동일 하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9000,14 +9005,14 @@ msgstr ""
 "마지막 현재 옵션 그룹에 대 한 모든 설정 다시 설정을 클릭 하 여 사전 설정을 저"
 "장."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 "LOCK 아이콘잠기는 값이 시스템(또는 기본값) 값과 동일하다는 것을 나타냅니다."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9017,7 +9022,7 @@ msgstr ""
 "을 나타냅니다.\n"
 "현재 값을 시스템(또는 기본값) 값으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9025,7 +9030,7 @@ msgstr ""
 "WHITE BULLET 기호 아이콘은 마지막으로 저장 한 사전 설정과 동일한 값을 나타냅"
 "니다."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9035,31 +9040,31 @@ msgstr ""
 "음을 나타냅니다.\n"
 "현재 값을 마지막 저장된 사전 설정으로 재설정하려면 클릭합니다."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "재료"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "서포트 헤드"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "서포트 기둥"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "서포트 기둥 및 접합부 연결"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "자동 생성"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9068,74 +9073,74 @@ msgstr ""
 "\"%1%\"는 \"%3%\" 범주에 있기 때문에 \"%2% %1%\"이 비활성화됩니다.\n"
 "\"%1%\"을 활성화하려면 \"%2%\"을 끄십시오."
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "객체 고도"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "물체 주위의 패드"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Undef"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "사전 설정 전환: 저장되지 않은 변경 사항"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "이전 값"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "새 값"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "전송하기"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "무시\t"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "저장"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9143,11 +9148,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "프라사슬라이스러는 당신의 행동을 기억할 것입니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9156,55 +9161,56 @@ msgstr ""
 "\"기본 설정\"을 방문하여 \"%1%\"을 확인하십시오.\n"
 "저장되지 않은 변경 사항에 대해 다시 묻는 것입니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "일부 필드는 너무 길기 때문에 적합합니다. 마우스 오른쪽 클릭으로 전체 텍스트"
 "가 드러납니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "모든 설정 변경 내용은 삭제됩니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "선택한 옵션을 저장합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr "선택한 설정을 새로 선택한 사전 설정으로 전송합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "선택한 옵션을 저장하여 \"%1%\"을 미리 설정합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr "선택한 옵션을 새로 선택한 사전 설정된 \"%1%\"로 전송합니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 "사전 설정된 \"%1%\"에는 다음과 같은 저장되지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9213,7 +9219,7 @@ msgstr ""
 "사전 설정된 \"%1%\"은 새 프린터 프로필과 호환되지 않으며 다음과 같은 저장되"
 "지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9222,50 +9228,50 @@ msgstr ""
 "사전 설정된 \"%1%\"은 새 인쇄 프로파일과 호환되지 않으며 다음과 같은 저장되"
 "지 않은 변경 사항이 있습니다."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "압출기 수"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -10075,24 +10081,24 @@ msgstr "유효성 검사 실패"
 msgid "write calledback failed"
 msgstr "쓰기 호출 백 실패"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "모든 개체가 인쇄 볼륨 외부에 있습니다."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "제공된 설정으로 인해 빈 인쇄가 발생합니다."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "일부 개체가 너무 가깝습니다. 귀하의 압출기가 그들과 충돌합니다."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "일부 개체는 너무 크고 익스트루더 충돌없이 인쇄 할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10102,7 +10108,7 @@ msgstr ""
 "를 제외한 모든 개체를 제거하거나 \"complete_objects\"하여 순차 모드를 사용하"
 "도록 설정합니다."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -10110,7 +10116,7 @@ msgstr ""
 "나선형 꽃병 옵션(Spiral Vase)은 단일 재료 객체를 인쇄 할 때만 사용할 수 있습"
 "니다."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10118,7 +10124,7 @@ msgstr ""
 "와이프 타워는 모든 압출기직경이 동일하고 동일한 직경의 필라멘트를 사용하는 경"
 "우에만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10126,7 +10132,7 @@ msgstr ""
 "와이프 타워는 현재 말린, RepRap / 단거리, RepRapFirmware 및 Repetier G 코드 "
 "맛에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10134,29 +10140,29 @@ msgstr ""
 "와이프 타워는 현재 상대적 압출기 어드레싱 (use_relative_e_distances=1)에서만 "
 "지원됩니다."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr "현재 활성화된 와이프 타워로는 Ooze 방지가 지원되지 않습니다."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr "와이프 타워는 현재 볼륨 E(use_volumetric_e=0)를 지원하지 않습니다."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr "와이프 타워는 현재 다중 재료 순차 인쇄에 대해 지원되지 않습니다."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 "와이프 타워는 레이어 높이가 동일한 경우에만 여러 개체에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10164,7 +10170,7 @@ msgstr ""
 "와이프 타워는 같은 수의 라프트 레이어 위에 인쇄 된 경우 여러 객체에 대해서만 "
 "지원됩니다"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10172,14 +10178,14 @@ msgstr ""
 "와이프 타워는 동일한 support_material_contact_distance로 인쇄 된 경우 여러 객"
 "체에 대해서만 지원됩니다"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 "와이프 타워는 똑같이 슬라이스 된 경우 여러 오브젝트에 대해서만 지원됩니다."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10187,22 +10193,22 @@ msgstr ""
 "지우기 타워는 모든 오브젝트가 동일한 가변 레이어 높이를 갖는 경우에만 지원됩"
 "니다."
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "하나 이상의 개체에 프린터에없는 압출기가 지정되었습니다."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm가 너무 낮아 레이어 높이%3% mm에서 인쇄할 수 없습니다."
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "노즐 직경 %3% mm로 인쇄할 수 있는 과도한 %1%=%2% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10213,7 +10219,7 @@ msgstr ""
 "(support_material_extruder == 0 or support_material_interface_extruder == 0)"
 "로 인쇄되는 경우 모든 노즐은 동일한 지름이어야합니다."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10221,7 +10227,7 @@ msgstr ""
 "와이프 타워가 가용성 지지체와 함께 작동 하려면 서포트 레이어를 오브젝트 레이"
 "어와 동기화 해야 합니다."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10232,27 +10238,46 @@ msgstr ""
 "에만 비가용성 서포트를 지원 합니다. (support_material_extruder과 "
 "support_material_interface_extruder 모두 0으로 설정 해야 합니다.)"
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "첫번째 레이어의 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "레이어 높이는 노즐 직경보다 클 수 없습니다"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "레이어 채우기"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G코드 내보내기"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G 코드 생성"
 
diff --git a/resources/localization/nl/PrusaSlicer_nl.po b/resources/localization/nl/PrusaSlicer_nl.po
index 54971091a..fe5d58709 100644
--- a/resources/localization/nl/PrusaSlicer_nl.po
+++ b/resources/localization/nl/PrusaSlicer_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-12-14 09:56+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -602,7 +602,7 @@ msgstr "Actief"
 msgid "PrusaSlicer version"
 msgstr "PrusaSlicer versie"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "print"
 
@@ -610,17 +610,17 @@ msgstr "print"
 msgid "filaments"
 msgstr "filamenten"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA-print"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA-materiaal"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "printer"
 
@@ -679,7 +679,7 @@ msgstr "Standaard"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Alles"
 
@@ -770,7 +770,7 @@ msgstr "SLA materialen"
 msgid "All installed printers are compatible with the selected %1%."
 msgstr "Alle geïnstalleerde printers zijn compatibel met de geselecteerde %1%."
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "filament"
 
@@ -864,7 +864,7 @@ msgstr ""
 "update wordt toegepast."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Herlaad van schijf"
 
@@ -1174,7 +1174,7 @@ msgstr "&Voltooi"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Annuleren"
 
@@ -1245,7 +1245,7 @@ msgstr ""
 "aangemaakt."
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr "Desktopintegratie"
 
@@ -1736,8 +1736,8 @@ msgid "parameter name"
 msgstr "parameternaam"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "n.v.t."
 
@@ -1943,7 +1943,7 @@ msgstr "Voeg toe aan bed"
 msgid "Add selected shape(s) to the bed"
 msgstr "Voeg geselecteerd(e) object(en) toe aan bed"
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Voeg toe"
 
@@ -2150,7 +2150,7 @@ msgid "Wipe"
 msgstr "Afvegen"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Opties"
 
@@ -2419,7 +2419,7 @@ msgid "Add..."
 msgstr "Voeg toe..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Verwijder alles"
 
@@ -3352,7 +3352,7 @@ msgstr "Kritische fout"
 msgid "Internal error: %1%"
 msgstr "Interne fout: %1%"
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3362,7 +3362,7 @@ msgstr ""
 "Probeer het bestand handmatig te verwijderen om de fout te herstellen. Uw "
 "gebruikersprofielen worden niet beïnvloed."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3370,12 +3370,12 @@ msgstr ""
 "Fout tijdens het lezen van PrusaGCodeViewer-configuratiebestand. Het is "
 "mogelijk beschadigd. Probeer het handmatig te verwijderen."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr "U opent %1%, versie %2%."
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3394,7 +3394,7 @@ msgstr ""
 "In dat geval wordt uw actieve configuratie opgeslagen voor het importeren "
 "van de nieuwe configuratie."
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3406,19 +3406,19 @@ msgstr ""
 "aangemaakt door b>%1% %2%</b>.\n"
 "Moet de nieuwe configuratie worden geïmporteerd?"
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr "Importeer"
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr "Niet importeren"
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3434,7 +3434,7 @@ msgstr ""
 "https://www.prusa3d.com/prusaslicer/.\n"
 "Wilt u doorgaan?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3443,46 +3443,46 @@ msgstr ""
 "%s\n"
 "Wilt u doorgaan?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Onthoud mijn keuze"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr "Nieuwe release versie %1% is beschikbaar."
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr "Zie downloadpagina."
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr "Nieuwe pre-release versie %1% is beschikbaar."
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Zie Release-pagina."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "Instellingentab voorbereiden"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3495,23 +3495,23 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "Je hebt de volgende presets opgeslagen voor de printhost-uploadwachtrij"
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3521,7 +3521,7 @@ msgstr ""
 "getoond in de printerinstellingen.\n"
 "Instellingen zijn beschikbaar in de fysieke printerinstellingen."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3531,138 +3531,138 @@ msgstr ""
 "Let op: deze naam kan later worden aangepast in de fysieke-"
 "printerinstellingen"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Informatie"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Opnieuw aanmaken"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Laden van huidige presets"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Laden van de weergavemodus"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Kies een 3MF- of AMF-bestand:"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Kies één of meer STL-, OBJ-, AMF-, 3MF-, of PRUSA-bestanden:"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Kies een bestand (gcode/.GCO/.G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Veranderen van de taal van het programma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Taalselectie"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Wijzig taal (change language)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "aangepast"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "Voer %s uit"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "Configuratiesnapshots"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Inspecteer/activeer configuratiesnapshots"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Neem configuratiesnapshot"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Neem een configuratiesnapshot op"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr "Controleer op configuratie-updates"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Controleer op configuratie-updates"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "Voorkeuren"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Programmavoorkeuren"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Eenvoudig"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Eenvoudige weergave"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Geavanceerd"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Geavanceerde weergave"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Expert"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Expertweergave"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Modus"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s-weergavemodus"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "Wijzig taal (change language)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr "Flash printer firmware"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Upload een firmwarebestand op een Arduino-gebaseerde printer"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr "Neemt een configuratiesnapshot"
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
@@ -3670,32 +3670,32 @@ msgstr ""
 "Sommige presets zijn aangepast en onopgeslagen instellingen worden niet "
 "meegenomen bij de configuratiesnapshot."
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Snapshotnaam"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr "Laad een configuratiesnapshot"
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr "Doorgaan om configuratiesnapshot %1% te activeren?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "Activeren van configuratiesnapshot mislukt."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr "Herstart programma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Taalselectie"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3703,89 +3703,89 @@ msgstr ""
 "Het veranderen van de taal zorgt dat het programma opnieuw opstart.\n"
 "U verliest de geladen inhoud zoals getoond in de modelweergave."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr ""
 "Weet u zeker dat u door wilt gaan?\n"
 "Do you want to proceed?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "Configuratie"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] "De preset-aanpassing is succesvol opgeslagen"
 msgstr[1] "De presets-aanpassing is succesvol opgeslagen"
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr "Voor nieuwe projecten worden alle aanpassingen gereset"
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr "Laad een nieuw project terwijl het huidige project is aangepast."
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr "Project is aan het laden"
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr "Openen van nieuw project terwijl sommige presets niet opgeslagen zijn."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "De uploads zijn nog bezig"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Stop ze en ga toch door?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Lopende uploads"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 "Het is niet mogelijk meerdelige objecten te printen met de SLA-technologie."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "Controleer de objectenlijst voor het wijzigen van de preset."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr "Configuratie is aangepast van de configuratiewizard"
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Selecteer een gcode-bestand:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr "Open hyperlinks in de standaardbrowser?"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr "PrusaSlicer: Open hyperlink"
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "Hyperlinks openen in browser uitzetten"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr "PrusaSlicer onthoudt uw keuze."
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -3794,8 +3794,8 @@ msgstr ""
 "Ga naar Voorkeuren en controleer \"%1%\"\n"
 "om uw keuze te wijzigen."
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: vraag het niet nogmaals"
 
@@ -3901,7 +3901,7 @@ msgstr "Skirt en brim"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3911,7 +3911,7 @@ msgid "Advanced"
 msgstr "Geavanceerd"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3925,8 +3925,8 @@ msgid "Supports"
 msgstr "Support"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3936,8 +3936,8 @@ msgstr "Support"
 msgid "Pad"
 msgstr "Basisplaat"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -4040,7 +4040,7 @@ msgstr "Exporteer als STL-bestand"
 msgid "Reload the selected volumes from disk"
 msgstr "Herlaad de geselecteerde volumes vanaf schijf"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr "Vervang met STL"
 
@@ -4066,19 +4066,19 @@ msgstr "Verschaal tot printvolume"
 msgid "Scale the selected object to fit the print volume"
 msgstr "Verschaal het geselecteerde object tot deze in het printvolume past"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Converteer naar Engelse eenheden"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Conversie van Engelse eenheden ongedaan maken"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr "Converteer vanaf meters"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr "Omrekenen van meters terugdraaien"
 
@@ -4341,7 +4341,7 @@ msgstr "Laad bewerker"
 msgid "Loading"
 msgstr "Aan het laden"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "Bestand laden"
 
@@ -4781,7 +4781,7 @@ msgstr "Verwijder parameter"
 msgid "Delete Option %s"
 msgstr "Verwijder optie %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "Wijzig optie %s"
@@ -4900,18 +4900,18 @@ msgstr "Toolmarkering"
 msgid "Legend/Estimated printing time"
 msgstr "Legenda / Geschatte printtijd"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Meer"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr "Open voorkeuren."
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr "Open documentatie in de webbrowser."
 
@@ -5077,11 +5077,11 @@ msgstr ""
 "Het geïmporteerde SLA-archief bevat geen presets. De huidige SLA-presets "
 "worden gebruikt als oplossing."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr "U kunt geen SLA-project laden met een meerdelig object op het bed"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Attentie!"
 
@@ -5127,11 +5127,11 @@ msgstr ""
 "Laad configuratie van INI-, AMF-, 3MF- of gcode-bestanden en voeg samen"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "Exporteer gcode-bestand"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "Stuur G-code"
 
@@ -5522,7 +5522,7 @@ msgstr "Toon/verberg legenda en geschatte printtijd"
 msgid "Show/Hide G-code window"
 msgstr "Toon/verberg G-code venster"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Sliceweergave"
@@ -5640,29 +5640,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr "PrusaSlicer sluit terwijl sommige presets aangepast zijn."
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Printinstellingen"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Materiaalinstellingen"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Filamentinstellingen"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Printerinstellingen"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr "Zonder titel"
 
@@ -6176,7 +6176,7 @@ msgid "Open New Instance"
 msgstr "Open nieuwe instantie"
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr "Vergelijk presets"
 
@@ -6285,9 +6285,9 @@ msgstr "G-code"
 msgid "Save zip file as:"
 msgstr "ZIP-bestand opslaan als:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Slicen"
 
@@ -6555,7 +6555,7 @@ msgstr "Fout:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "Waarschuwing:"
 
@@ -6581,8 +6581,8 @@ msgstr "Instanties"
 msgid "Instance %d"
 msgstr "Instantie %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Lagen"
 
@@ -6859,12 +6859,12 @@ msgstr "Onder het object"
 msgid "Around object"
 msgstr "Rondom het object"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Stuur naar printer"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Slice nu"
 
@@ -6973,7 +6973,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "Uitwerpen van apparat %s(%s) mislukt."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Nieuw project"
 
@@ -6981,7 +6981,7 @@ msgstr "Nieuw project"
 msgid "Expand sidebar"
 msgstr "Zijbalk uitklappen"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6995,12 +6995,12 @@ msgstr[1] ""
 "De vorige presets zijn tijdelijk geïnstalleerd op de actieve instantie van "
 "PrusaSlicer"
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr "Laden van bestand \"%1%\" mislukt dankzij een ongeldige configuratie."
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -7015,11 +7015,11 @@ msgstr[1] ""
 "Objectengrootte van bestand %s blijken nul te zijn.\n"
 "Het object is verwijderd van het model"
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr "De afmetingen van het object zijn nul"
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -7038,15 +7038,15 @@ msgstr[1] ""
 "De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
 "van het object verschalen?"
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr "Het object is te klein"
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr "Pas toe op alle resterende kleine objecten die worden geladen."
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -7065,7 +7065,7 @@ msgstr[1] ""
 "De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
 "van het object verschalen?"
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
@@ -7076,11 +7076,11 @@ msgstr ""
 "Moet het bestand worden geladen als één object met meerdere onderdelen\n"
 "in plaats van deze te beschouwen als meerdere objecten?"
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Meerdelig object gedetecteerd"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
@@ -7088,11 +7088,11 @@ msgstr ""
 "Dit bestand kan niet geladen worden in eenvoudige modus. Wilt u overstappen "
 "op geavanceerde modus?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Geavanceerde data gedetecteerd"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -7101,7 +7101,7 @@ msgstr ""
 "U kan geen objecten toevoegen van %s, omdat sommige daarvan meerdelig kunnen "
 "zijn"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -7111,7 +7111,7 @@ msgstr ""
 "Moeten deze objecten beschouwd worden als één object\n"
 "met meerdere onderdelen, of als meerdere objecten?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7119,39 +7119,39 @@ msgstr ""
 "Het object is te groot. Daarom is het automatisch verschaald tot de grootte "
 "van het printbed."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Object te groot?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Exporteer STL-bestand:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "Exporteer AMF-bestand:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Bestand opslaan als:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "Exporteer OBJ-bestand:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Verwijder object"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr "Verwijder alle objecten"
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Reset project"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
@@ -7159,15 +7159,15 @@ msgstr ""
 "Het geselecteerde object kan niet gesplitst worden omdat het maar één "
 "onderdeel bevat."
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr "Alle niet-solide onderdelen (bewerkers) zijn verwijderd"
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Splits op naar objecten"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
@@ -7175,87 +7175,87 @@ msgstr ""
 "Een object heeft aangepaste supportforcering die niet gebruikt worden omdat "
 "supports uit staan."
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr "Sta supports voor forceringen alleen toe"
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Ongeldige data"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Een andere export loopt op dit moment."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr "Vervangen door:"
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr "Niet mogelijk om te vervangen met meer dan één volume"
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr "Fout tijdens vervangen"
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr "Selecteer het nieuwe bestand"
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr "Vervangbestand is niet geselecteerd"
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Selecteer het bestand om te herladen"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "Het geselecteerde bestand"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr "verschilt ten opzichte van het originele bestand"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr "Wilt u het vervangen"
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Herladen van:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "Niet in staat om te herladen:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "Fout tijdens herladen"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Herlaad alles van schijf"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Er zijn actieve waarschuwingen wat betreft de slice:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "gegeven waarschuwingen"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D-bewerkingsweergave"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr "Ongedaan maken / opnieuw doen wordt verwerkt"
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7266,21 +7266,21 @@ msgstr ""
 "Sommige %1% presets zijn aangepast. Deze gaan verloren bij het wijzigen van "
 "het soort printer."
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr "Een nieuw project aanmaken terwijl het huidige project is aangepast."
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr "Een nieuw project aanmaken terwijl sommige presets zijn aangepast."
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 "U kunt de aanpassingen in de preset behouden bij het nieuwe project, of deze "
 "verwijderen"
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
@@ -7291,126 +7291,126 @@ msgstr ""
 "Let op dat als de wijzigingen worden opgeslagen, deze niet bewaard worden in "
 "het nieuwe project"
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr "Maak een nieuw project aan"
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Laad project"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Importeer object"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Importeer objecten"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "bevat geen geldige G-code."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "Probleem bij het laden van het gcode-bestand"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Plaats projectbestand"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Open als project"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Importeer alleen het model"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Importeer alleen de configuratie"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Selecteer een commando om toe te passen op het bestand"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Commando"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "Laat niet meer zien"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "Je kunt maar één gcode-bestand tegelijk openen."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Versleep en plaats G-code-bestand"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Laad bestand"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Laad bestanden"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Alle objecten worden verwijderd. Doorgaan?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Verwijder geselecteerde objecten"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Verhoog aantal instanties"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Verlaag aantal instanties"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Voer het aantal kopieën in:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "Kopieën van het geselecteerde object"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "Stel aantal kopieën in voor %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Snij met behulp van vlak"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G-code-bestand opslaan als:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr "SL1 / SL1S bestand opslaan als:"
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr "De gegeven naam is niet geldig."
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 "De volgende karakters worden niet toegestaan in een FAT-bestandssysteem:"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
@@ -7418,15 +7418,15 @@ msgstr ""
 "Het bed is leeg.\n"
 "Wilt u toch het project opslaan?"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr "Project opslaan"
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Exporteer"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
@@ -7434,14 +7434,14 @@ msgstr ""
 "Aangepaste supports, naden en multi-material schilderingen zijn verwijderd "
 "bij het repareren van de mesh."
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Plak van klembord"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Algemeen"
 
@@ -7588,7 +7588,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7602,7 +7602,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7613,7 +7613,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -8169,12 +8169,12 @@ msgstr "Stuur G-code naar printerhost"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Upload naar printerhost met de volgende bestandsnaam:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 "Gebruik schuine streepjes ( / ) als mapscheidingstekens als dat nodig is."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Groep"
 
@@ -8183,18 +8183,18 @@ msgstr "Groep"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Bestandsnaam eindigt niet op \"%s\". Wilt u doorgaan?"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr "Upload"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr "Upload en print"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr "Uploaden en simuleren"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr "Upload"
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8654,7 +8654,7 @@ msgstr "volledige profielnaam"
 msgid "symbolic profile name"
 msgstr "symbolische profielnaam"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Lagen en perimeters"
 
@@ -8738,11 +8738,11 @@ msgstr "Overlapping"
 msgid "Flow"
 msgstr "Stroom"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Overige"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Output-opties"
 
@@ -8754,11 +8754,11 @@ msgstr "Achtereenvolgens printen"
 msgid "Extruder clearance"
 msgstr "Extruderruimte"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Outputbestand"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Scripts voor nabewerking"
 
@@ -8766,19 +8766,20 @@ msgstr "Scripts voor nabewerking"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Opmerkingen"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Afhankelijkheden"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Profielafhankelijkheden"
 
@@ -8859,7 +8860,7 @@ msgid "Ramming settings"
 msgstr "Ramming-instellingen"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Custom G-code"
@@ -8906,8 +8907,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Grootte en coördinaten"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Mogelijkheden"
 
@@ -8976,11 +8977,11 @@ msgstr "Draaiing"
 msgid "Tilt time"
 msgstr "Draaitijd"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Correcties"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Belichtingstijd"
 
@@ -9158,42 +9159,46 @@ msgstr "Weet u zeker dat u de geselecteerde preset %1% wilt?"
 msgid "%1% Preset"
 msgstr "Preset %1%"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Stel in"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Zoeken"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Alleen hele woorden"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "Machinelimieten worden opgenomen in de G-code en gebruikt voor de geschatte "
 "printtijd."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9203,7 +9208,7 @@ msgstr ""
 "gebruikt om de printtijd te schatten, waardoor ze niet nauwkeurig kunnen "
 "zijn bij een printer met andere machinelimieten."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9211,12 +9216,12 @@ msgstr ""
 "Machinelimieten zijn niet ingesteld, waardoor de geschatte printtijd niet "
 "nauwkeurig is."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "Vergrendeld"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9224,12 +9229,12 @@ msgstr ""
 "geeft aan dat de instellingen gelijk zijn aan de systeemwaarden voor de "
 "huidige optiegroep"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "Ontgrendeld"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9241,12 +9246,12 @@ msgstr ""
 "Klik op het ontgrendeld-pictogram om de instelling te resetten naar de "
 "systeemwaarden voor de huidige optiegroep."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "Wit bolletje"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9254,12 +9259,12 @@ msgstr ""
 "de linkerknop geeft aan dat het niet een systeempreset is,\n"
 "de rechterknop geeft aan of de instelling is gewijzigd."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "Pijltje terug"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9271,7 +9276,7 @@ msgstr ""
 "Klik op het pijltje-terug-pictogram om alle instellingen te resetten naar de "
 "laatst opgeslagen preset voor de huidige optiegroep."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9279,7 +9284,7 @@ msgstr ""
 "Vergrendeld-pictogram geeft aan dat de instellingen gelijk zijn aan de "
 "systeemwaarde van de huidige optiegroep"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9291,11 +9296,11 @@ msgstr ""
 "Klik om alle instellingen voor de huidige optiegroep te resetten naar "
 "systeemwaarden."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "Het witte bolletje geeft aan dat het geen systeempreset betreft."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9303,7 +9308,7 @@ msgstr ""
 "Het witte bolletje geeft aan dat de instelling gelijk is aan de laatst "
 "opgeslagen preset voor de huidige optiegroep."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9316,14 +9321,14 @@ msgstr ""
 "Klik om alle instellingen terug te zetten voor de huidige optiegroep naar de "
 "laatst opgeslagen preset."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 "Vergrendeld-pictogram geeft aan dat de waarde gelijk is aan de systeemwaarde."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9333,7 +9338,7 @@ msgstr ""
 "aan de systeemwaarde.\n"
 "Klik om de huidige waarde te resetten naar de systeemwaarde."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9341,7 +9346,7 @@ msgstr ""
 "Het witte bolletje geeft aan dat de waarde gelijk is aan de laatst "
 "opgeslagen preset."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9351,31 +9356,31 @@ msgstr ""
 "gelijk is aan de laatst opgeslagen preset.\n"
 "Klik om de waarde te resetten naar de laatst opgeslagen preset."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Materiaal"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr "Materiaal-printprofiel"
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Supportkop"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Supportpijler"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "Verbindingen van de supporttakken en kruisingen"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Automatisch genereren"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9384,74 +9389,74 @@ msgstr ""
 "\"%1%\" is uitgeschakeld omdat \"%2%\" aanstaat in \"%3%\"-categorie.\n"
 "Om \"%1%\" aan te zetten moet \"%2%\" uit staan"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Objectverhoging"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Basisplaat rondom object"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Ongedefinieerd"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Onopgeslagen wijzigingen"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "Wisselen van presets: niet-opgeslagen wijzigingen"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Oude waarde"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Nieuwe waarde"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr "Behoud"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Omzetten"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr "Niet opslaan"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Afwijzen"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Opslaan"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9459,11 +9464,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "PrusaSlicer onthoudt je keuze."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9472,56 +9477,57 @@ msgstr ""
 "Kijk naar \"Voorkeuren\" en check \"%1%\"\n"
 "om weer te vragen over niet-opgeslagen wijzigingen."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Sommige velden zijn te lang om te passen. Rechtermuisklik toont de volledige "
 "tekst."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr "Alle gewijzigde instellingen worden niet opgeslagen"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Gewijzigde instellingen worden niet opgeslagen."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "Geselecteerde opties opslaan."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr "Behoud de geselecteerde instellingen."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr "Ze de geselecteerde instelling om in de nieuw geselecteerde preset."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "Geselecteerde opties voor preset \"%1%\" opslaan."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 "Zet de geselecteerde optie om in de nieuw geselecteerde preset \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] "De volgende preset is aangepast"
 msgstr[1] "De volgende presets zijn aangepast"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr "Preset \"%1%\" heeft de volgende niet-opgeslagen wijzigingen:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9530,7 +9536,7 @@ msgstr ""
 "Preset \"%1%\" is niet geschikt voor het nieuwe printerprofiel en heeft de "
 "volgende niet-opgeslagen wijzigingen:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9539,40 +9545,40 @@ msgstr ""
 "Preset \"%1%\" is niet geschikt voor het nieuwe printprofiel en heeft de "
 "volgende niet-opgeslagen wijzigingen:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Aantal extruders"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr "Toon alle presets (inclusief incompatibele)"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr "Linker presetwaarde"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr "Rechter presetwaarde"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr "Een van de presets niet gevonden"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr "Vergeleken presets hebben verschillende soorten printers"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr "Presets zijn gelijk"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
@@ -9581,11 +9587,11 @@ msgstr ""
 "Klik op deze knop om dezelfde preset te selecteren voor de rechter en linker "
 "preset."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr "Ongedefinieerde categorie"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr "Ongedefinieerde groep"
 
@@ -10446,28 +10452,28 @@ msgstr "validatie mislukt"
 msgid "write calledback failed"
 msgstr "terugschrijven mislukt"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Alle objecten bevinden zich buiten het printvolume."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "De ingevoerde instellingen resulteren in een lege print."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 "Sommige objecten staan te dicht op elkaar. De extruder zal er tegenaan "
 "botsen."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Sommige objecten zijn te groot en kunnen niet geprint worden zonder "
 "botsingen."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10477,14 +10483,14 @@ msgstr ""
 "alle objecten op één na, of sta achtereenvolgens printen toe bij "
 "\"complete_objects\"."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 "De spiraalmodus kan alleen gebruikt worden met enkel-materiaal objecten."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10492,7 +10498,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt als alle extruders dezelfde nozzle- "
 "en filamentdiameter hebben."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10500,7 +10506,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt voor Marlin, RepRap/Sprinter, "
 "RepRapFirmware en Repetier firmwaretypes."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10508,19 +10514,19 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt met de relatieve extruderinstelling "
 "('use_relative_e_distances' = 1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "Druippreventie wordt niet ondersteund als het afveegblok is geactiveerd."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 "Het afveegblok niet ondersteunt bij volumetrische extrusiewaarden "
 "('use_volumetric_e' = 0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10528,7 +10534,7 @@ msgstr ""
 "Het afveegblok wordt momenteel niet ondersteund voor multi-materiaal "
 "achtereenvolgens printen."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10536,7 +10542,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze een "
 "gelijke laagdikte hebben"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10544,7 +10550,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze op "
 "een gelijk aantal raftlagen zijn geplaatst"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10552,7 +10558,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt voor meerdere objecten als de "
 "instelling 'support_material_contact_distance' gelijk staat"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10560,7 +10566,7 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt voor meerdere objecten als ze "
 "tegelijk gesliced worden."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10568,24 +10574,24 @@ msgstr ""
 "Het afveegblok wordt alleen ondersteunt als alle objecten dezelfde variabele "
 "laagdikte hebben"
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Een of meer objecten staan ingesteld op een extruder die de printer niet "
 "heeft."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm is te weinig om te printen bij een laagdikte van %3% mm"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "Te veel %1%=%2% mm om te printen met een nozzlediameter van %3% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10597,7 +10603,7 @@ msgstr ""
 "dezelfde diameter hebben ('support_material_extruder' = 0 of "
 "'support_material_interface_extruder' = 0)."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10605,7 +10611,7 @@ msgstr ""
 "Om het afveegblok te laten samenwerken met oplosbare support, moeten de "
 "supportlagen gesynchroniseerd worden met de objectlagen."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10616,28 +10622,47 @@ msgstr ""
 "worden met de huidige extruder zonder toolwissel (Zet zowel "
 "'support_material_extruder' en 'support_material_interface_extruder' op 0)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 "Laagdikte van de eerste laag kan niet groter zijn dan de nozzlediameter"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "Laagdikte kan niet groter zijn dan de nozzlediameter"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Vullingslagen"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr "Genereer skirt en brim"
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G-code exporteren"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G-code genereren"
 
diff --git a/resources/localization/pt_BR/PrusaSlicer_pt_BR.po b/resources/localization/pt_BR/PrusaSlicer_pt_BR.po
index 609b788be..b793b59e5 100644
--- a/resources/localization/pt_BR/PrusaSlicer_pt_BR.po
+++ b/resources/localization/pt_BR/PrusaSlicer_pt_BR.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-01-06 10:53+0100\n"
 "Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
 "Language-Team: \n"
@@ -596,7 +596,7 @@ msgstr "Ativar"
 msgid "PrusaSlicer version"
 msgstr "Versão do PrusaSlicer"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "impressão"
 
@@ -604,17 +604,17 @@ msgstr "impressão"
 msgid "filaments"
 msgstr "filamentos"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "Impressão de SLA"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "Material de SLA"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "impressora"
 
@@ -673,7 +673,7 @@ msgstr "Todos padrão"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Todos"
 
@@ -761,7 +761,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "filamento"
 
@@ -852,7 +852,7 @@ msgstr ""
 "atualização seja aplicada."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Recarregar a partir do disco"
 
@@ -1155,7 +1155,7 @@ msgstr "&Final"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Cancelar"
 
@@ -1219,7 +1219,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1701,8 +1701,8 @@ msgid "parameter name"
 msgstr "nome do parâmetro"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/D"
 
@@ -1910,7 +1910,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Adicionar"
 
@@ -2112,7 +2112,7 @@ msgid "Wipe"
 msgstr "Limpar"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Opções de saída"
 
@@ -2381,7 +2381,7 @@ msgid "Add..."
 msgstr "Adicionar..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Deletar todos"
 
@@ -3286,7 +3286,7 @@ msgstr "Erro crítico"
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3296,7 +3296,7 @@ msgstr ""
 "Tente excluir manualmente o arquivo para recuperar do erro. Seus perfis de "
 "usuário não serão afetados."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3304,12 +3304,12 @@ msgstr ""
 "Erro de análise PrusaGCodeViewer, ele provavelmente está corrompido. Tente "
 "excluir manualmente o arquivo para recuperar do erro."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3321,7 +3321,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3330,19 +3330,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3352,7 +3352,7 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3361,46 +3361,46 @@ msgstr ""
 "%s\n"
 "Você tem certeza que deseja continuar?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Lembrar minha escolha"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "Carregando configuração"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Ver página de lançamentos."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "Preparando abas de configuração"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3413,24 +3413,24 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "Você tem a seguinte predefinição com opções salvas para o \"Print Host upload"
 "\""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3441,7 +3441,7 @@ msgstr ""
 "Agora essa informação vai ser exposta em configurações das impressoras "
 "físicas."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3452,169 +3452,169 @@ msgstr ""
 "Nota: Esse nome pode ser alterado depois a partir das configurações de "
 "impressoras físicas"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Informação"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Recriando"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Carregando presets"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Carregamento de um modelo de vista"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Escolha um arquivo (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Escolha um ou mais arquivos (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Escolha um arquivo (GCODE/.GCO/.G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Alteração de um idioma do aplicativo"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Selecione o idioma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Idioma"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "modificado"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "Executar %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&Captura das config"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Inspecionar / ativar capturas de config"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Capturar &config"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Capturar uma config"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Verificar atualizações nas aplicações"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&Preferências"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Preferências de aplicação"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Simples"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Modo simples de visualização"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Avançado"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Modo avançado de visualização"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Especialista"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Modo especialista de visualização"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Modo"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s Modo de visualização"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "&Linguagem"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Atualizar o firmware para uma impressora baseada em Arduino"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Nome da captura"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "Falha ao ativar a captura de configuração."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Seleção de linguagem"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3622,95 +3622,95 @@ msgstr ""
 "Alterar a linguagem fará com que o aplicativo reinicie.\n"
 "Você irá perder conteúdo na bandeja."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Você quer prosseguir?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&Configuração"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "Os uploads ainda estão em andamento"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Pará-los e continuar assim mesmo?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Uploads em andamento"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 "É impossível imprimir objetos com múltiplas partes com a tecnologia SLA."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "Verifique a lista de objetos antes de alterar a predefinição."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Selecione um arquivo gcode:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "Suprimir para abrir o hiperlink no navegador"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: Não me pergunte de novo"
 
@@ -3816,7 +3816,7 @@ msgstr "Saia e aba"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3826,7 +3826,7 @@ msgid "Advanced"
 msgstr "Avançado"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3840,8 +3840,8 @@ msgid "Supports"
 msgstr "Suportes"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3851,8 +3851,8 @@ msgstr "Suportes"
 msgid "Pad"
 msgstr "Bloco"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3955,7 +3955,7 @@ msgstr "Exportar como STL"
 msgid "Reload the selected volumes from disk"
 msgstr "Recarregue os volumes selecionados do disco"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3981,19 +3981,19 @@ msgstr "Escalar para volume de impressão"
 msgid "Scale the selected object to fit the print volume"
 msgstr "Escale o objeto selecionado para se adequar ao volume de impressão"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Converter de unidades imperiais"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Reverter conversão de unidades imperiais"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4258,7 +4258,7 @@ msgstr ""
 msgid "Loading"
 msgstr "Carregando"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "Carregar arquivo de config"
 
@@ -4699,7 +4699,7 @@ msgstr "Remover parâmetro"
 msgid "Delete Option %s"
 msgstr "Excluir opção %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "Alterar opção %s"
@@ -4818,18 +4818,18 @@ msgstr "Ferramenta de marcação"
 msgid "Legend/Estimated printing time"
 msgstr "Legenda/Tempo estimado de impressão"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Mais"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4991,12 +4991,12 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 "Você não pode carregar o projeto SLA com um objeto de várias partes na cama"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Atenção!"
 
@@ -5037,11 +5037,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "Carregar config. de um. ini/AMF/3mf/Gcode e mesclar"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "Exportar G-code"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "Enviar G-code"
 
@@ -5436,7 +5436,7 @@ msgstr "Mostrar/Esconder Legenda e Tempo estimado de impressão"
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Visualização"
@@ -5554,29 +5554,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Config. de impressão"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Config. de material"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Config. de filamento"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Config. da impressora"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -6089,7 +6089,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6198,9 +6198,9 @@ msgstr "G-code"
 msgid "Save zip file as:"
 msgstr "Salvar arquivo compactado(zip) como:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Fatiamento"
 
@@ -6466,7 +6466,7 @@ msgstr "ERRO:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "AVISO:"
 
@@ -6492,8 +6492,8 @@ msgstr "Instâncias"
 msgid "Instance %d"
 msgstr "Instância %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Camadas"
 
@@ -6764,12 +6764,12 @@ msgstr "Abaixo do objeto"
 msgid "Around object"
 msgstr "Em torno do objeto"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Enviar para a impressora"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Fatiar agora"
 
@@ -6878,7 +6878,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "Ejetar o dispositivo %s(%s)  falhou."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Novo projeto"
 
@@ -6886,7 +6886,7 @@ msgstr "Novo projeto"
 msgid "Expand sidebar"
 msgstr "Expandir barra lateral"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6896,12 +6896,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6912,11 +6912,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6929,15 +6929,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6950,18 +6950,18 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Objeto de várias partes detectado"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
@@ -6969,11 +6969,11 @@ msgstr ""
 "Este arquivo não pode ser carregado em um modo simples. Deseja mudar para um "
 "modo avançado?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Dados avançados detectados"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6982,7 +6982,7 @@ msgstr ""
 "Você não pode adicionar o objeto (s) %s por causa de um ou alguns deles é "
 "(são) de várias partes"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -6992,7 +6992,7 @@ msgstr ""
 "Em vez de considerá-los como múltiplos objetos, devo considerar\n"
 "esses arquivos para representar um único objeto com várias partes?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7000,139 +7000,139 @@ msgstr ""
 "Seu objeto parece ser muito grande, por isso foi automaticamente "
 "dimensionado para baixo para caber sua mesa de impressão."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Objeto muito grande?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Exportar arquivo STL:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "Exportar arquivo AMF:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Salvar arquivo como:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "Exportar arquivo OBJ:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Excluir objeto"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Redefinir projeto"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Dividir em objetos"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Dados inválidos"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Outro trabalho de exportação está em execução no momento."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Selecione o arquivo STL para recarregar"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "O arquivo selecionado"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Recarregar a partir do disco:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "Não é possível recarregar:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "Erro durante a recarga"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Recarregar tudo do disco"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Existem avisos ativos sobre modelos fatiados:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "avisos gerados"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "vista do editor 3D"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7140,171 +7140,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Carregar projeto"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Importar objeto"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Importar objetos"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "não contém um gcode válido."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "Erro durante carregamento do arquivo .gcode"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Soltar arquivo de projeto"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Abrir como projeto"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Modelo somente geometria"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Importar somente config"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Selecione uma ação para aplicar ao arquivo"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Ação"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "Não mostrar novamente"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "Você pode abrir apenas um arquivo .gcode por vez."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Arraste e solte o arquivo G-code"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Carregar arquivo"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Carregar arquivos"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Todos os objetos serão removidos, continuar?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Excluir objetos selecionados"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Aumentar instâncias"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Diminuir instâncias"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Definir números de cópias:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "Cópias do objeto selecionado"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "Definir números de cópias para %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Cortado por plano"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "Salve o arquivo G-code como:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Exportar"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Colar da área de transferência"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Geral"
 
@@ -7451,7 +7451,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7465,7 +7465,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7476,7 +7476,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -8013,11 +8013,11 @@ msgstr "Enviar G-code para o host da impressora"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Carregue para o host da impressora com o seguinte nome de arquivo:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "Use barras (/) como um separador de diretório, se necessário."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Grupo"
 
@@ -8026,18 +8026,18 @@ msgstr "Grupo"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8488,7 +8488,7 @@ msgstr "nome customizado da config"
 msgid "symbolic profile name"
 msgstr "nome customizado da config"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Camadas e perímetros"
 
@@ -8572,11 +8572,11 @@ msgstr "Cobrir"
 msgid "Flow"
 msgstr "Fluxo"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Outro"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Opções de saída"
 
@@ -8588,11 +8588,11 @@ msgstr "Impressão sequencial"
 msgid "Extruder clearance"
 msgstr "Folga da extrusora"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Arquivo de saída"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Scripts de pós-processamento"
 
@@ -8600,19 +8600,20 @@ msgstr "Scripts de pós-processamento"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Notas"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Dependências"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Dependências de perfil"
 
@@ -8689,7 +8690,7 @@ msgid "Ramming settings"
 msgstr "Config. de Ramming"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "G-code customizado"
@@ -8736,8 +8737,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Tamanho e coordenadas"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Capacidades"
 
@@ -8806,11 +8807,11 @@ msgstr "Inclinar"
 msgid "Tilt time"
 msgstr "Tempo de inclinação"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Correções"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Exposição"
 
@@ -8974,42 +8975,46 @@ msgstr "Tem certeza de que deseja %1% da predefinição selecionada?"
 msgid "%1% Preset"
 msgstr "%1% Predefinição"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Definir"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Achar"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Palavra inteira"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "Os limites da máquina serão emitidos para o G-code e usados ​​o para estimar o "
 "tempo de impressão."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9020,7 +9025,7 @@ msgstr ""
 "preciso, pois a impressora pode aplicar um conjunto diferente de limites da "
 "máquina."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9028,12 +9033,12 @@ msgstr ""
 "Os limites da máquina não são definidos, portanto, a estimativa do tempo de "
 "impressão pode não ser precisa."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "CADEADO FECHADO"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9041,12 +9046,12 @@ msgstr ""
 "indica que as config. são as mesmas que os valores do sistema (ou padrão) "
 "para o grupo de opções atual"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "CADEADO ABERTO"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9058,12 +9063,12 @@ msgstr ""
 "Clique no ícone DESBLOQUEAR para redefinir todas as config. do grupo de "
 "opções atual para os valores do sistema (ou padrão)."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "PONTO BRANCO"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9072,12 +9077,12 @@ msgstr ""
 "padrão),\n"
 "para o botão direito: indica que as config. não foram modificadas."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "REDEFINIR"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9089,7 +9094,7 @@ msgstr ""
 "Clique no ícone REDEFINIR para redefinir todas as config. do grupo de opções "
 "atual para a última predefinição salva."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9097,7 +9102,7 @@ msgstr ""
 "O ícone CADEADO FECHADO indica que as config. são as mesmas que os valores "
 "do sistema (ou padrão) para o grupo de opções atual"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9109,13 +9114,13 @@ msgstr ""
 "Clique para redefinir todas as config. para o grupo de opções atual para os "
 "valores do sistema (ou padrão)."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 "O ícone PONTO BRANCO indica uma predefinição que não é do sistema (ou não "
 "predefinida)."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9123,7 +9128,7 @@ msgstr ""
 "O ícone PONTO BRANCO indica que as config. são as mesmas da última "
 "predefinição salva para o grupo de opções atual."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9135,7 +9140,7 @@ msgstr ""
 "Clique para redefinir todas as config. do grupo de opções atual para a "
 "última predefinição salva."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -9143,7 +9148,7 @@ msgstr ""
 "O ícone CADEADO FECHADO indica que o valor é o mesmo que o valor do sistema "
 "(ou padrão)."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9153,7 +9158,7 @@ msgstr ""
 "valor do sistema (ou padrão).\n"
 "Clique para redefinir o valor atual para o valor do sistema (ou padrão)."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9161,7 +9166,7 @@ msgstr ""
 "O ícone PONTO BRANCO indica que o valor é o mesmo da última predefinição "
 "guardada."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9171,31 +9176,31 @@ msgstr ""
 "predefinição salva.\n"
 "Clique para redefinir o valor atual para a última predefinição salva."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Material"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Cabeça de suporte"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Pilar de suporte"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "Conexão das varas de suporte e junções"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Geração Automática"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9204,74 +9209,74 @@ msgstr ""
 "\"%1%\" está desabilitado porque \"%2%\" está ativado na categoria \"%3%\".\n"
 "Para habilitar \"%1%\", desligue \"%2%\""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Elevação do objeto"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Pad em torno do objeto"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Indef"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "Alterando Predefinições: Alterações não salvas"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Valor Antigo"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Valor Novo"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Transferir"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Descartar"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Salvar"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9279,11 +9284,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "PrusaSlicer se lembrará de sua ação."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9292,58 +9297,59 @@ msgstr ""
 "Visite \"Preferências\" e marque \"%1%\"\n"
 "para ser questionado sobre alterações não salvas novamente."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Alguns campos são muito longos para caber. Clique com o botão direito do "
 "mouse para revelar o texto completo."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Todas as alterações nas configurações serão descartadas."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "Remover o objeto selecionado."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 "Transfira as opções selecionadas para as predefinições recém-selecionadas."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "Salve as opções selecionadas para predefinir \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 "Transfira as opções selecionadas para a predefinição recém-selecionada \"%1%"
 "\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr "\"%1%\"Tem as seguintes alterações não salvas:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9352,7 +9358,7 @@ msgstr ""
 "A predefinição \"%1%\" não é compatível com o novo perfil de impressora e "
 "possui as seguintes alterações não salvas:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9361,50 +9367,50 @@ msgstr ""
 "A predefinição \"%1%\" não é compatível com o novo perfil de impressão e "
 "possui as seguintes alterações não salvas:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Contagem de extrusoras"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -10239,26 +10245,26 @@ msgstr "falha na validação"
 msgid "write calledback failed"
 msgstr "write calledback falhou"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Todos os objetos estão fora do volume de impressão."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "As config. fornecidas causarão uma impressão vazia."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "Alguns objetos são muito próximos; sua extrusora irá colidir com eles."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Alguns objetos são muito altos e não podem ser impressos sem colisões de "
 "extrusoras."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10268,14 +10274,14 @@ msgstr ""
 "Remova todos, exceto o último objeto, ou habilite o modo sequencial por "
 "\"complete_objects\"."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 "A opção vaso espiral só pode ser usada ao imprimir objetos de material único."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10283,7 +10289,7 @@ msgstr ""
 "A torre de limpeza só é suportada se todas as extrusoras tiverem o mesmo "
 "diâmetro da ponteira e usarem filamentos do mesmo diâmetro."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10291,7 +10297,7 @@ msgstr ""
 "A Torre de Limpeza é atualmente suportada apenas para os firmwares Marlin, "
 "RepRap/Sprinter, RepRapFirmware e Repetier G-code."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10299,19 +10305,19 @@ msgstr ""
 "A torre da limpeza é suportada atualmente somente com o endereçamento "
 "relativo da extrusora (use_relative_e_distances = 1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "A prevenção de escorrimento não é suportada atualmente com a torre da "
 "limpeza permitida."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 "Atualmente, a Torre limpa não suporta E volumétrica (use_volumetric_e=0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10319,7 +10325,7 @@ msgstr ""
 "A torre de limpeza só é suportada para vários objetos se eles tiverem "
 "alturas de camada iguais."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10327,7 +10333,7 @@ msgstr ""
 "A torre de limpeza só é suportada para vários objetos se eles tiverem "
 "alturas de camada iguais"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10335,7 +10341,7 @@ msgstr ""
 "A torre de limpeza só é suportada para vários objetos se elas forem "
 "impressas em um número igual de camadas de estrado"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10343,7 +10349,7 @@ msgstr ""
 "A torre de limpeza só é suportado para vários objetos se eles são impressos "
 "com a mesma distância de contato do suporte"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10351,7 +10357,7 @@ msgstr ""
 "A torre de limpeza só é suportada para vários objetos se eles são fatiados "
 "igualmente."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10359,26 +10365,26 @@ msgstr ""
 "A torre de limpeza só é suportada se todos os objetos tiverem a mesma altura "
 "de camada variável"
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Um ou mais objetos foram atribuídos a uma extrusora que a impressora não tem."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 "%1% = %2% mm é muito baixo para ser impresso a uma altura de camada %3% mm"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 "Excesso %1%=%2% milímetro a ser imprimível com um diâmetro da ponteira %3% "
 "milímetro"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10390,7 +10396,7 @@ msgstr ""
 "(support_material_extruder = = 0 ou support_material_interface_extruder = = "
 "0), todos as ponteiras têm que ser do mesmo diâmetro."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10398,7 +10404,7 @@ msgstr ""
 "Para que a torre de limpeza funcione com os suportes solúveis, as camadas de "
 "suporte precisam ser sincronizadas com as camadas de objeto."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10410,28 +10416,47 @@ msgstr ""
 "(ambos support_material_extruder e support_material_interface_extruder "
 "precisam ser definidos como 0)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 "A primeira altura da camada não pode ser maior do que o diâmetro da ponteira"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "A altura da camada não pode ser maior do que o diâmetro da ponteira"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Camadas de preenchimento"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "Exportando o G-code"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "Gerando G-code"
 
diff --git a/resources/localization/ru/PrusaSlicer_ru.po b/resources/localization/ru/PrusaSlicer_ru.po
index 79a0c384a..66d2d0414 100644
--- a/resources/localization/ru/PrusaSlicer_ru.po
+++ b/resources/localization/ru/PrusaSlicer_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-12-15 15:35+0700\n"
 "Last-Translator: Andylg andylg@yandex.ru\n"
 "Language-Team: \n"
@@ -611,7 +611,7 @@ msgstr "Активный"
 msgid "PrusaSlicer version"
 msgstr "Версия PrusaSlicer"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "печать"
 
@@ -619,17 +619,17 @@ msgstr "печать"
 msgid "filaments"
 msgstr "пруток"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "Профиль SLA печати"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "Профиль SLA материала"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "принтер"
 
@@ -688,7 +688,7 @@ msgstr "Стандартные"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Все"
 
@@ -778,7 +778,7 @@ msgstr "SLA материалы (фотополимерная смола)"
 msgid "All installed printers are compatible with the selected %1%."
 msgstr "Все установленные принтеры совместимы с выбранным прутком %1%."
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "пруток"
 
@@ -873,7 +873,7 @@ msgstr ""
 "(снапшот)."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Перезагрузить с диска"
 
@@ -1183,7 +1183,7 @@ msgstr "&Завершить"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Отмена"
 
@@ -1258,7 +1258,7 @@ msgstr ""
 "была успешно создана на рабочем столе."
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr "Интеграция с рабочим столом"
 
@@ -1748,8 +1748,8 @@ msgid "parameter name"
 msgstr "имя параметра"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "Н/Д"
 
@@ -1956,7 +1956,7 @@ msgstr "Добавить на стол"
 msgid "Add selected shape(s) to the bed"
 msgstr "Добавьте выбранную фигуру(-ы) на стол"
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Добавить в библиотеку"
 
@@ -2162,7 +2162,7 @@ msgid "Wipe"
 msgstr "Очистка"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Опции"
 
@@ -2433,7 +2433,7 @@ msgid "Add..."
 msgstr "Добавить..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Удалить всё"
 
@@ -3358,7 +3358,7 @@ msgstr "Критическая ошибка"
 msgid "Internal error: %1%"
 msgstr "Внутренняя ошибка: %1%"
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3369,7 +3369,7 @@ msgstr ""
 "Попробуйте вручную удалить файл для восстановления после ошибки. "
 "Пользовательские профили не будут затронуты."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3377,12 +3377,12 @@ msgstr ""
 "Ошибка обработки конфигурационного файла PrusaGCodeViewer. Вероятно, он "
 "повреждён. Попробуйте вручную удалить файл для восстановления после ошибки."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr "Вы запустили %1% версии %2%."
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3400,7 +3400,7 @@ msgstr ""
 "Если да, то перед импортом новой конфигурации будет создана резервная копия "
 "активной конфигурации."
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3413,19 +3413,19 @@ msgstr ""
 "\n"
 "Следует ли импортировать эту конфигурацию?"
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr "Импорт"
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr "Не импортировать"
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3441,7 +3441,7 @@ msgstr ""
 "https://www.prusa3d.cz/prusaslicer/.\n"
 "Продолжить?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3450,46 +3450,46 @@ msgstr ""
 "%s\n"
 "Хотите продолжить?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Запомнить мой выбор"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "Загрузка конфигурации"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr "Доступна новый релиз программы %1%."
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr "Смотреть страницы загрузки."
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr "Доступна новая предрелизная версия %1%."
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Смотрите страницу релизов."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "Подготовка вкладок настроек"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3502,24 +3502,24 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "У вас имеются следующие профили с сохраненными параметрами для загрузки на "
 "хост печати"
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3529,7 +3529,7 @@ msgstr ""
 "настройках принтера.\n"
 "Теперь эти настройки будут доступны в разделе настройки физических принтеров."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3538,138 +3538,138 @@ msgstr ""
 "При создании новых принтеров они будут именоваться как «Принтер N».\n"
 "Примечание: это имя можно изменить позже в настройках физических принтеров"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Информация"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Воссоздание"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Загрузка текущих профилей"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Загрузка режима просмотра"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Выберите один файл (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Выберите один или несколько файлов (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Выберите один файл (GCODE/.GCO/.G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Изменение языка приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Выбор языка"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Язык"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "изменено"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "Запустить %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&Резервные копии конфигурации (снапшот)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Проверка и активация резервных копий конфигурации"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Сделать &снапшот"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Сделать резервную копию конфигурации (снапшот)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr "Проверка наличие обновлений конфигурации"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Проверка наличие обновлений конфигурации"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&Настройки приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Настройки приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Простой"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Простой режим просмотра интерфейса приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Расширенный"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Расширенный режим просмотра интерфейса приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Продвинутый"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Продвинутый режим просмотра интерфейса приложения"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Режим интерфейса"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s режим просмотра"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "&Язык программы"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr "&Прошивка принтера"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Загрузить прошивку в принтер на основе Arduino"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr "Создание резервной копии конфигурации (снапшот)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
@@ -3677,32 +3677,32 @@ msgstr ""
 "В некоторых профилях имеются изменения. Несохранённые изменения в них не "
 "будут записаны в снапшот."
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Имя снапшота"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr "Загрузка резервной копии конфигурации (снапшот)"
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr "Активировать резервную копию конфигурации %1%?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "Сбой активации снапшота."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr "Перезапустить приложение"
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Выбор языка"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3710,87 +3710,87 @@ msgstr ""
 "Смена языка вызовет перезапуск приложения.\n"
 "Вы потеряете содержимое стола."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Хотите продолжить?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&Настройки"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] "Изменённый профиль успешно сохранён"
 msgstr[1] "Изменённые профили успешно сохранёны"
 msgstr[2] "Изменённые профили успешно сохранёны"
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr "Для нового проекта все изменения будут сброшены"
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr "Загрузка нового проекта при существующих изменениях в текущем проекте."
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr "Загрузка проекта"
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr "Открытие нового проекта при несохранении некоторых профилей."
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "Загрузки всё ещё продолжаются"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Остановить их и продолжить?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Текущие загрузки"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "По технологии SLA невозможно напечатать составную модель(и)."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "Пожалуйста, проверьте список моделей перед изменением профиля."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr "Редактирование конфигурации с помощью мастера настроек"
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Выбрать файл G-кода:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr "Открыть гиперссылку в браузере по умолчанию?"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr "PrusaSlicer: Открытие гиперссылки"
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "Запретить открытие гиперссылок в браузере"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr "PrusaSlicer запомнит ваш выбор."
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -3799,8 +3799,8 @@ msgstr ""
 "Зайдите в «Настройки приложения» и установите флажок \"%1%\", чтобы изменить "
 "свой выбор."
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: Не спрашивать снова"
 
@@ -3906,7 +3906,7 @@ msgstr "Юбка и кайма"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3916,7 +3916,7 @@ msgid "Advanced"
 msgstr "Дополнительно"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3930,8 +3930,8 @@ msgid "Supports"
 msgstr "Поддержка"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3941,8 +3941,8 @@ msgstr "Поддержка"
 msgid "Pad"
 msgstr "Подложка"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -4045,7 +4045,7 @@ msgstr "Экспорт в STL"
 msgid "Reload the selected volumes from disk"
 msgstr "Перезагрузить выбранные объёмы с диска"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr "Заменить STL"
 
@@ -4071,19 +4071,19 @@ msgstr "Отмасштабировать под область печати"
 msgid "Scale the selected object to fit the print volume"
 msgstr "Отмасштабировать выбранную модель до объёма стола"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Преобразовать размер из английской системы мер"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Отменить преобразование размера из английской системы мер"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr "Преобразовать размер из метрической системы мер"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr "Отменить преобразование размера из метрической системы мер"
 
@@ -4357,7 +4357,7 @@ msgstr "Загрузить модификатор"
 msgid "Loading"
 msgstr "Загрузка"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "Загрузка файла"
 
@@ -4802,7 +4802,7 @@ msgstr "Удалить параметр"
 msgid "Delete Option %s"
 msgstr "Удаление параметра %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "Изменение параметра %s"
@@ -4921,18 +4921,18 @@ msgstr "Маркер инструмента"
 msgid "Legend/Estimated printing time"
 msgstr "Условные обозначения/Расчётное время печати"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Подробнее"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr "Открыть настройки приложения."
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr "Открыть документацию в браузере."
 
@@ -5108,11 +5108,11 @@ msgstr ""
 "Импортированный SLA архив не содержит никаких профилей. Текущие SLA профили "
 "использовались в качестве резервных."
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr "Вы не можете загрузить SLA проект с составной моделью на столе"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Внимание!"
 
@@ -5153,11 +5153,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "Загрузить конфигурацию из ini/amf/3mf/g-кода и объединить"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "Экспорт в G-код"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "Отправить G-код"
 
@@ -5549,7 +5549,7 @@ msgstr "Показать/Скрыть условные обозначения/р
 msgid "Show/Hide G-code window"
 msgstr "Показать/скрыть окно отображения G-кода"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Предпросмотр нарезки"
@@ -5667,29 +5667,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr "Закрытие PrusaSlicer, при имеющихся изменениях в профилях."
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Настройки печати"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Настройка материала"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Настройки прутка"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Настройки принтера"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr "Без названия"
 
@@ -6205,7 +6205,7 @@ msgid "Open New Instance"
 msgstr "Запустить новый экземпляр программы"
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr "Сравнение профилей"
 
@@ -6314,9 +6314,9 @@ msgstr "G-код"
 msgid "Save zip file as:"
 msgstr "Сохранить .zip файл как:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Нарезка"
 
@@ -6589,7 +6589,7 @@ msgstr "ОШИБКА:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "ПРЕДУПРЕЖДЕНИЕ:"
 
@@ -6615,8 +6615,8 @@ msgstr "Копии"
 msgid "Instance %d"
 msgstr "Копия %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Слои"
 
@@ -6901,12 +6901,12 @@ msgstr "Под моделью"
 msgid "Around object"
 msgstr "Вокруг модели"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "На принтер"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "НАРЕЗАТЬ"
 
@@ -7017,7 +7017,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "Не удалось извлечь устройство %s(%s)."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Новый проект"
 
@@ -7025,7 +7025,7 @@ msgstr "Новый проект"
 msgid "Expand sidebar"
 msgstr "Развернуть боковую панель"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -7042,12 +7042,12 @@ msgstr[2] ""
 "Приведённые ниже профили были временно установлены на активной копии "
 "PrusaSlicer"
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr "Не удалось загрузить файл \"%1%\" из-за недопустимой конфигурации."
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -7065,11 +7065,11 @@ msgstr[2] ""
 "Похоже у объектов из файла %s нулевой размер.\n"
 "Они были удалены из модели."
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr "Размер модели равен нулю"
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -7092,15 +7092,15 @@ msgstr[2] ""
 "Внутренней единицей измерения PrusaSlicer являются миллиметры. Пересчитать "
 "размеры моделей?"
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr "Модель слишком мала"
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr "Применить ко всем загружаемым мелким моделям."
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -7123,7 +7123,7 @@ msgstr[2] ""
 "Внутренней единицей измерения PrusaSlicer являются миллиметры. Пересчитать "
 "размеры моделей?"
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
@@ -7133,11 +7133,11 @@ msgstr ""
 "Следует ли загружать файл как единую модель, состоящий из нескольких\n"
 "частей (вместо того, чтобы рассматривать их как несколько моделей)?"
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Обнаружена модель, состоящая из нескольких частей"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
@@ -7145,11 +7145,11 @@ msgstr ""
 "Этот файл не может быть загружен в простом режиме. Хотите перейти в "
 "расширенный режим?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Обнаружены расширенные данные"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -7158,7 +7158,7 @@ msgstr ""
 "Вы не можете добавить модель(и) из %s, потому что одна или несколько из них "
 "являются составными (состоят из нескольких частей)"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -7168,7 +7168,7 @@ msgstr ""
 "Вместо того, чтобы рассматривать их как несколько моделей, следует ли "
 "рассматривать их как одну модель, состоящую из несколько частей?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7176,54 +7176,54 @@ msgstr ""
 "Ваша модель слишком большая, поэтому она была автоматически уменьшена до "
 "размера вашего печатного стола."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Модель слишком большая?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Экспорт в STL файл:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "Экспорт в AMF файл:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Сохранить файл как:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "Экспорт в OBJ файл:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Удаление модели"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr "Удаление всех моделей"
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Обнуление проекта"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 "Выбранная модель не может быть разделена, так как она состоит из одной части."
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr "Все модификаторы были удалены"
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Разделить на модели"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
@@ -7231,87 +7231,87 @@ msgstr ""
 "Модель имеет пользовательские принудительные поддержки, которые не будут "
 "использоваться, так как поддержки отключены."
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr "Разрешить только принудительную поддержку"
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Неверные данные"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Уже идёт другой процесс экспорта."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr "Заменить из:"
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr "Невозможно заменить более чем одним объём"
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr "Ошибка при выполнении замены"
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr "Выберите новый файл"
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr "Файл для замены не выбран"
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Пожалуйста, выберите файл для перезагрузки"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "В выбранном файле"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr "отличается от исходного файла"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr "Хотите заменить его"
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Перезагрузка из:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "Не удалось перезагрузить:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "Ошибка во время перезагрузки"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Перезагрузить всё с диска"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Имеются активные предупреждения о нарезанных моделях:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "вызвала предупреждения"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D-вид"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr "Отмена / Повтор в процессе выполнения"
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7322,21 +7322,21 @@ msgstr ""
 "Некоторые профили %1% были изменены и будут потеряны после переключения "
 "технологии печати."
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr "Создание нового проекта при изменении в текущем проекте."
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 "Создание нового проекта при имеющихся изменениях в нескольких профилях."
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 "Вы можете сохранить изменения в профилях в новом проекте или отменить их."
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
@@ -7346,125 +7346,125 @@ msgstr ""
 "сохранить изменения как новые профили.\n"
 "Примечание: При сохранении изменений они не переносятся в новый проект."
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr "Создание нового проекта"
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Загрузка проекта"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Импорт модели"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Импорт моделей"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "G-кода содержатся недопустимые данные."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "Ошибка при загрузке .gcode файла"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Перетаскивание файла-проекта"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Открыть как проект"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Импортировать только геометрию"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Импортировать только конфигурацию"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Выберите действие для применения к файлу"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Действие"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "Больше не показывать"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "За раз вы можете открыть только один .gcode файл."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Перетащите G-код файл"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Загрузить файл"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Загрузить файлы"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Все модели будут удалены, продолжить?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Удаление выбранных моделей"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Добавление копии"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Удаление копии"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Введите количество копий:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "Количество копий выбранной модели"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "Задать количество копий: %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Разрез по плоскости"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "Сохранить файл G-кода как:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr "Сохранить SL1 / SL1S файл как:"
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr "Указано недопустимое имя файла."
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr "Следующие символы не разрешены файловой системой FAT:"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
@@ -7472,15 +7472,15 @@ msgstr ""
 "На столе ничего нет.\n"
 "Всё равно сохранить проект?"
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr "Сохранение проекта"
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Экспорт"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
@@ -7488,14 +7488,14 @@ msgstr ""
 "После починки сетки были удалены пользовательские поддержки, швы и "
 "мультиматериальная покраска."
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Вставка из буфера обмена"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Общие"
 
@@ -7636,7 +7636,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7650,7 +7650,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7661,7 +7661,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -8226,13 +8226,13 @@ msgstr "Отправить G-кода на хост принтера"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Загрузить на хост принтера со следующим именем:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 "При необходимости используйте косую черту ( / ) в качестве разделителя "
 "каталогов."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Группа"
 
@@ -8241,18 +8241,18 @@ msgstr "Группа"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Имя загружаемого файла не заканчивается на \"%s\". Хотите продолжить?"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr "Загрузить"
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr "Загрузить и напечатать"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr "Загрузить и сэмулировать"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr "Загрузить"
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8715,7 +8715,7 @@ msgstr "полное имя профиля"
 msgid "symbolic profile name"
 msgstr "символическое имя профиля"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Слои и периметры"
 
@@ -8799,11 +8799,11 @@ msgstr "Перекрытие"
 msgid "Flow"
 msgstr "Поток"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Прочее"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Выходные параметры"
 
@@ -8815,11 +8815,11 @@ msgstr "Последовательная печать"
 msgid "Extruder clearance"
 msgstr "Радиус безопасной зоны экструдера"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Выходной файл"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Скрипты постобработки"
 
@@ -8827,19 +8827,20 @@ msgstr "Скрипты постобработки"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Заметки"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Зависимости"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Зависимости профиля"
 
@@ -8925,7 +8926,7 @@ msgid "Ramming settings"
 msgstr "Настройки рэмминга"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Пользовательский G-код"
@@ -8971,8 +8972,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Размер и координаты"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Характеристики принтера"
 
@@ -9041,11 +9042,11 @@ msgstr "Наклон ванночки"
 msgid "Tilt time"
 msgstr "Время наклона ванночки"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Корректировка"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Экспозиция"
 
@@ -9239,42 +9240,46 @@ msgstr "Вы уверены, что хотите %1% выбранный проф
 msgid "%1% Preset"
 msgstr "Профиль %1%"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Выбор"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Найти"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Слово целиком"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "Ограничения принтера будут передаваться в G-код и использоваться для оценки "
 "времени печати."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9284,7 +9289,7 @@ msgstr ""
 "используются для оценки времени печати, которое может быть неточным, "
 "поскольку принтер может применять другой набор ограничений для принтера."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9292,12 +9297,12 @@ msgstr ""
 "Ограничения принтера не заданы, поэтому оценка времени печати может быть "
 "неточной."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "ЗАКРЫТЫЙ ЗАМОЧЕК"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9305,12 +9310,12 @@ msgstr ""
 "указывает, что настройки совпадают с системными значениями (или значениями "
 "по умолчанию) для текущей группы."
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "ОТКРЫТЫЙ ЗАМОЧЕК"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9322,12 +9327,12 @@ msgstr ""
 "Нажмите, чтобы сбросить все настройки текущей группы до системных значений "
 "(или значений по умолчанию)."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "БЕЛЫЙ МАРКЕР"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9335,12 +9340,12 @@ msgstr ""
 "слева: указывает на не системный профиль (или профиль не по умолчанию),\n"
 "справа: указывает, что параметры не были изменены."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "ЗНАЧОК СО СТРЕЛКОЙ"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9353,7 +9358,7 @@ msgstr ""
 "настройки для текущей группы до последнего\n"
 "сохранённого значения профиля."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9361,7 +9366,7 @@ msgstr ""
 "ЗАКРЫТЫЙ ЗАМОЧЕК указывает, что настройки совпадают с системными значениями "
 "(или значениями по умолчанию) для текущей группы."
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9373,12 +9378,12 @@ msgstr ""
 "Нажмите, чтобы сбросить все настройки текущей группы до системных значений "
 "(или значений по умолчанию)."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 "БЕЛЫЙ МАРКЕР указывает на не системный профиль (или профиль не по умолчанию)."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9386,7 +9391,7 @@ msgstr ""
 "БЕЛЫЙ МАРКЕР означает, что настройки совпадают с настройками в последнем "
 "сохранённом профиле для текущей группы."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9398,7 +9403,7 @@ msgstr ""
 "Нажмите, чтобы сбросить все настройки для текущей группы до последнего "
 "сохранённого значения профиля."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -9406,7 +9411,7 @@ msgstr ""
 "ЗАКРЫТЫЙ ЗАМОЧЕК указывает, что значение совпадает с системным значением "
 "(или значение по умолчанию)."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9417,7 +9422,7 @@ msgstr ""
 "Нажмите, чтобы сбросить текущее значение к системному значению (или значению "
 "по умолчанию)."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9425,7 +9430,7 @@ msgstr ""
 "БЕЛЫЙ МАРКЕР указывает, что значение совпадает со значением в последнем "
 "сохранённом профиле."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9435,31 +9440,31 @@ msgstr ""
 "значением в последнем сохранённом профиле для текущей группы.\n"
 "Нажмите, чтобы сбросить значение до последнего сохранённого значения профиля."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Материал"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr "Профиль печати материалами"
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Носик поддержки"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Тело поддержки"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "Соединения опор поддержки со связующим узлом"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Автоматическая генерация"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9468,74 +9473,74 @@ msgstr ""
 "\"%1%\" отключена, так как \"%2%\" находится в категории \"%3%\".\n"
 "Чтобы включить \"%1%\", отключите \"%2%\""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Высота подъёма модели"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Подложка вокруг модели"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Не задано"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Несохранённые изменения"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "Смена профилей: несохранённые изменения"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Старое значение"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Новое значение"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr "Запомнить"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Перенести"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr "Не сохранять"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Не сохранять"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Сохранить"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9543,11 +9548,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "PrusaSlicer запомнит ваш выбор."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9556,56 +9561,57 @@ msgstr ""
 "Зайдите в настройки приложения и установите флажок \"%1%\",\n"
 "чтобы вернуть запрос о несохранённых изменениях."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Некоторые поля слишком длинные. Щёлкните правой кнопкой мыши, чтобы показать "
 "полный текст."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr "Все изменения в настройках не будут сохранены"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Все изменённые параметры будут потеряны."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "Сохранить выбранные параметры."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr "Запомнить выбранные настройки."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr "Перенести выбранные параметры во вновь выбранный профиль."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "Сохранить выбранные параметры в профиле \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr "Перенести выбранные параметры во вновь выбранный профиль \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] "Был изменён следующий профиль"
 msgstr[1] "Были изменены следующие профиля"
 msgstr[2] "Были изменены следующие профилей"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr "Профиль \"%1%\" имеет следующие несохранённые изменения:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9614,7 +9620,7 @@ msgstr ""
 "Профиль \"%1%\" несовместим с новым профилем принтера, и в нём есть "
 "следующие несохранённые изменения:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9623,40 +9629,40 @@ msgstr ""
 "Профиль \"%1%\" несовместим с новым профилем печати, и имеет следующие "
 "несохранённые изменения:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Количество экструдеров"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr "Выберите профили для сравнения"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr "Показать все профили (включая несовместимые)"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr "Значение в левом профиле"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr "Значение в правом профиле"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr "Не найден один из профилей"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr "Сравниваемые профили имеют различную технологию печати"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr "Отличия в профилях отсутствуют"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
@@ -9664,11 +9670,11 @@ msgstr ""
 "Профили отличаются.\n"
 "Нажмите эту кнопку, чтобы выставить в правый профиль тоже что и в левом."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr "Неопределённая категория"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr "Неопределённая группа"
 
@@ -10525,27 +10531,27 @@ msgstr "ошибка проверки"
 msgid "write calledback failed"
 msgstr "ошибка записи обратного вызова"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Все модели находятся за пределами области печати."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "Заданные настройки приведут к пустой печати."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 "Некоторые модели находятся слишком близко друг к другу. Экструдер при печати "
 "столкнётся с ними."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Некоторые модели слишком высокие и при печати экструдер столкнётся с ними."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10555,13 +10561,13 @@ msgstr ""
 "Либо оставьте на столе одну модель или включите последовательную печать с "
 "помощью \"complete_objects\"."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr "В режиме «Спиральная ваза» можно печатать только одним материалом."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10569,7 +10575,7 @@ msgstr ""
 "Режим черновой башни применим только в том случае, если все экструдеры имеют "
 "одинаковый диаметр сопла и используется пруток одного диаметра."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10577,7 +10583,7 @@ msgstr ""
 "В настоящее время режим черновой башни поддерживается только следующими "
 "типами G-кода: Marlin, RepRap/Sprinter, RepRapFirmware, Repetier."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10585,20 +10591,20 @@ msgstr ""
 "В настоящее время для режима черновой башни поддерживается только "
 "относительная адресация экструдера (use_relative_e_distances=1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "«Предотвращение течи материала» в настоящее время не поддерживается при "
 "включённой черновой башне."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 "Черновая башня в настоящее время не поддерживает объёмные значения E "
 "(use_volumetric_e=0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10606,7 +10612,7 @@ msgstr ""
 "В настоящее время режим черновой башни не поддерживает последовательную "
 "печать для мультиматериальных принтеров."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10614,7 +10620,7 @@ msgstr ""
 "Режим черновой башни применим для нескольких моделей только в том случае, "
 "если они имеют одинаковую высоту слоя."
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10622,7 +10628,7 @@ msgstr ""
 "Режим черновой башни применим для нескольких моделей только в том случае, "
 "если они имеют одинаковое число слоёв подложки."
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10631,7 +10637,7 @@ msgstr ""
 "если они печатаются с одинаковым support_material_contact_distance "
 "(расстояние от поддержки до модели по вертикали)."
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10639,7 +10645,7 @@ msgstr ""
 "Режим черновой башни применим для нескольких моделей только в том случае, "
 "если они нарезаны одинаково."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10647,26 +10653,26 @@ msgstr ""
 "Режим черновой башни применим только в том случае, если все модели имеют "
 "одну и туже переменную высоту слоя."
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Для одного или нескольких моделей был назначен экструдер, который у принтера "
 "отсутствует."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 "Значение параметра %1%=%2% мм слишком мало для печати при высоте слоя %3% мм"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 "Чрезмерное значение параметра %1%=%2% мм для печати при диаметре сопла %3% мм"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10678,7 +10684,7 @@ msgstr ""
 "(support_material_extruder == 0 или support_material_interface_extruder == "
 "0), все сопла должны иметь одинаковый диаметр."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10686,7 +10692,7 @@ msgstr ""
 "Для того, чтобы режим черновой башни работал с растворимой поддержкой, слои "
 "поддержки должны быть синхронизированы со слоями модели."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10699,27 +10705,46 @@ msgstr ""
 "и «Экструдер, печатающий связующий слой поддержки/подложки» должны быть "
 "установлены в 0)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "Высота первого слоя не может быть больше диаметра сопла."
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "Высота слоя не может быть больше диаметра сопла"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Заполнение слоёв"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr "Генерация юбки и каймы"
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "Экспорт в G-код"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "Генерация G-кода"
 
diff --git a/resources/localization/tr/PrusaSlicer_tr.po b/resources/localization/tr/PrusaSlicer_tr.po
index f7912c405..0b0e643c4 100644
--- a/resources/localization/tr/PrusaSlicer_tr.po
+++ b/resources/localization/tr/PrusaSlicer_tr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2019-05-23 00:37+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -563,7 +563,7 @@ msgstr "Aktif"
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "yazdır"
 
@@ -571,17 +571,17 @@ msgstr "yazdır"
 msgid "filaments"
 msgstr "filamentler"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA baskısı"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA malzemesi"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "yazıcı"
 
@@ -640,7 +640,7 @@ msgstr "Standart"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Tümü"
 
@@ -728,7 +728,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "filaman"
 
@@ -819,7 +819,7 @@ msgstr ""
 "oluşturulur."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1111,7 +1111,7 @@ msgstr "&Bitti"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "İptal"
 
@@ -1175,7 +1175,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1618,8 +1618,8 @@ msgid "parameter name"
 msgstr "parametre ismi"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr ""
 
@@ -1819,7 +1819,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Ekle"
 
@@ -2021,7 +2021,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Ayarlar"
 
@@ -2290,7 +2290,7 @@ msgid "Add..."
 msgstr "Ekle..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Tümünü sil"
 
@@ -3166,25 +3166,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3196,7 +3196,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3205,19 +3205,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3227,53 +3227,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3286,198 +3286,198 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Yeniden oluşturma"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Geçerli hazır ayarlar yükleniyor"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Mod görünümü yükleniyor"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Bir dosya seçin (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Bir veya daha fazla dosya seçin (STL / OBJ / AMF / 3MF / PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Bir uygulama dilinin değiştirilmesi"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Dil seçiniz"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Dil"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "değiştirilmiş"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "%s başlat"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&Yapılandırma Anlık Görüntüleri"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Yapılandırma anlık görüntülerini inceleme/etkinleştirme"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Yapılandırma &Anlık Görüntüsü Al"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Yapılandırma anlık görüntüsünü kaydet"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&Tercihler"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Uygulama tercihleri"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Basit"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Basit görünüm modu"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Gelişmiş Görünüm Modu"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Uzman"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Uzman Modu"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Mod"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s Görüntüleme Modu"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Arduino tabanlı bir yazıcıya yazılım yükle"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Anlık görüntü adı"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Dil seçimi"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3485,96 +3485,96 @@ msgstr ""
 "Dilin değiştirilmesi uygulamanın yeniden başlatılmasını tetikler.\n"
 "Tabla içeriğini kaybedeceksiniz."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Devam etmek istiyor musunuz?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&Ayarlar"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "SLA teknolojisi ile çok parçalı nesnelerin basılması mümkün değildir."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 "Lütfen önceden ayarlanmış değişiklik yapmadan önce nesne listenizi kontrol "
 "edin."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3680,7 +3680,7 @@ msgstr "Etek ve kenar"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3690,7 +3690,7 @@ msgid "Advanced"
 msgstr "Gelişmiş"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3704,8 +3704,8 @@ msgid "Supports"
 msgstr "Destekler"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3715,8 +3715,8 @@ msgstr "Destekler"
 msgid "Pad"
 msgstr "Altlık"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3819,7 +3819,7 @@ msgstr "STL Olarak Dışa Aktar"
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3845,19 +3845,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4118,7 +4118,7 @@ msgstr ""
 msgid "Loading"
 msgstr "Yükleniyor"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4544,7 +4544,7 @@ msgstr "Parametre kaldır"
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr ""
@@ -4663,18 +4663,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4834,11 +4834,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Dikkat!"
 
@@ -4879,11 +4879,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "G-code Dışa Aktar"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "G kodunu gönder"
 
@@ -5270,7 +5270,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Ön izleme"
@@ -5382,29 +5382,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Baskı Ayarları"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Malzeme Ayarları"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Filament Ayarları"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Yazıcı ayarları"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5914,7 +5914,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6023,9 +6023,9 @@ msgstr "G-kod"
 msgid "Save zip file as:"
 msgstr "Zip dosyasını farklı kaydet:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Dilimleme"
 
@@ -6287,7 +6287,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6313,8 +6313,8 @@ msgstr "Örnekleri"
 msgid "Instance %d"
 msgstr "Kopya %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Katmanlar"
 
@@ -6578,12 +6578,12 @@ msgstr ""
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Yazıcıya gönder"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Şimdi dilimle"
 
@@ -6692,7 +6692,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr ""
 
@@ -6700,7 +6700,7 @@ msgstr ""
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6710,12 +6710,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6726,11 +6726,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6743,15 +6743,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6764,28 +6764,28 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Çok parçalı nesne algılandı"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Gelişmiş veriler tespit edildi"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6794,14 +6794,14 @@ msgstr ""
 "%s öğesinden nesne ekleyemezsiniz çünkü bir yada bir kaçı çoklu parçadan "
 "oluşuyor"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -6809,139 +6809,139 @@ msgstr ""
 "Nesneniz çok büyük görünüyor, bu nedenle baskı tablanıza uyacak şekilde "
 "otomatik olarak küçültüldü."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Nesne çok mu büyük?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Dışa aktarılacak STL dosya:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "AMF dosyasını dışa aktar:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Farklı kaydet:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Geçersiz veri"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "Şu anda başka bir dışa aktarma işlemi çalışıyor."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3B düzenleme görünümü"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6949,171 +6949,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "G kodu dosyasını farklı kaydet:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Dışa Aktar"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Genel"
 
@@ -7244,7 +7244,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7258,7 +7258,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7269,7 +7269,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7780,11 +7780,11 @@ msgstr "G-Kodunu yazıcı ana bilgisayarına gönderin"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Aşağıdaki dosya adıyla Yazıcı Ana Bilgisayarına yükleyin:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "Gerekirse, eğik çizgi (/) işlevini dizin ayırıcı olarak kullanın."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7793,18 +7793,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "İD"
@@ -8244,7 +8244,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Katmanlar ve duvarlar"
 
@@ -8328,11 +8328,11 @@ msgstr "Üzerine bindirme"
 msgid "Flow"
 msgstr "Akış"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Diğer"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Çıktı seçenekleri"
 
@@ -8344,11 +8344,11 @@ msgstr "Sıralı baskı"
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Çıktı dosyası"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "İşlem sonrası komut dosyaları"
 
@@ -8356,19 +8356,20 @@ msgstr "İşlem sonrası komut dosyaları"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Notlar"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Bağımlılıklar"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Profil bağımlılıkları"
 
@@ -8444,7 +8445,7 @@ msgid "Ramming settings"
 msgstr "Sıkıştırma ayarları"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Özel G-code"
@@ -8482,8 +8483,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Boyut ve koordinatlar"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Kabiliyetler"
 
@@ -8548,11 +8549,11 @@ msgstr "Eğim"
 msgid "Tilt time"
 msgstr "Yatırma zamanı"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Düzeltmeler"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Poz"
 
@@ -8713,69 +8714,73 @@ msgstr "%1% ayarını seçili ön ayar yapmak istediğinizden emin misiniz?"
 msgid "%1% Preset"
 msgstr "%1% Ön Ayar"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Ayarla"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Bul"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Tam kelime"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "KAPALI KİLİT"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "AÇIK KİLİT"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8783,23 +8788,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "BEYAZ NOKTA"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "GERİ OK"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8811,13 +8816,13 @@ msgstr ""
 "Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
 "sıfırlamak için GERİ OK tuşuna basın."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8825,11 +8830,11 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -8837,7 +8842,7 @@ msgstr ""
 "BEYAZ NOKTA simgesi ayarların geçerli seçenek grubu için en son kaydedilen "
 "ön ayardakiyle aynı olduğunu gösterir."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8849,20 +8854,20 @@ msgstr ""
 "Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
 "sıfırlamak için tıklayın."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -8870,7 +8875,7 @@ msgstr ""
 "BEYAZ NOKTA simgesi, değerin son kaydedilen ön ayardakiyle aynı olduğunu "
 "gösterir."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -8880,105 +8885,105 @@ msgstr ""
 "olmadığını gösterir.\n"
 "Geçerli değeri son kaydedilen ön ayara sıfırlamak için tıklayın."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Malzeme"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Destek kafa"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Destek ayağı"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "Destek çubuklarının ve birleşimlerinin bağlantısı"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Otomatik oluşturma"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Nesne yüksekliği"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Kaydedilmemiş Değişiklikler"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Kaydet"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -8986,121 +8991,122 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9897,31 +9903,31 @@ msgstr "doğrulama başarısız"
 msgid "write calledback failed"
 msgstr "geri arama yazma başarısız oldu"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Tüm nesneler baskı hacminin dışında."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "Verilen ayarlar boş yazdırmaya neden olur."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "Bazı nesneler çok yakın; Ekstrüderiniz onlarla çarpışacaktır."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "Bazı nesneler çok uzun ve ekstrüder çarpışmaları olmadan basılamaz."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -9929,19 +9935,19 @@ msgstr ""
 "Spiral Vazo seçeneği, yalnızca tek malzeme nesnelerini yazdırırken "
 "kullanılabilir."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -9949,22 +9955,22 @@ msgstr ""
 "Temizleme Kulesi şu anda yalnızca göreceli ekstrüder adreslemesi ile "
 "desteklenmektedir (use_relative_e_distances = 1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -9972,7 +9978,7 @@ msgstr ""
 "Temizleme Kulesi, yalnızca eşit katman yüksekliğine sahipse birden çok nesne "
 "için desteklenir"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -9980,7 +9986,7 @@ msgstr ""
 "Temizleme Kulesi, yalnızca eşit sayıda sal katmanın üzerine basıldıysa, "
 "yalnızca birden çok nesne için desteklenir"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -9988,7 +9994,7 @@ msgstr ""
 "Temizleme Kulesi, yalnızca aynı support_material_contact_distance ile "
 "yazdırılıyorsa, birden çok nesne için desteklenir"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -9996,30 +10002,30 @@ msgstr ""
 "Temizleme Kulesi, yalnızca eşit şekilde dilimlenmeleri durumunda birden çok "
 "nesne için desteklenir."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Bir veya daha fazla nesneye, yazıcının sahip olmadığı bir ekstrüder "
 "verilmiştir."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10031,7 +10037,7 @@ msgstr ""
 "support_material_interface_ekstrüder == 0), tüm nozullar aynı çapta "
 "olmalıdır."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10039,7 +10045,7 @@ msgstr ""
 "Temizleme Kulesi'nin çözülebilir desteklerle çalışması için, destek "
 "katmanlarının nesne katmanları ile senkronize edilmesi gerekir."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10051,27 +10057,46 @@ msgstr ""
 "(Hem support_material_ekstrüder hem de support_material_interface_ekstrüder "
 "0 olarak ayarlanmalıdır)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "İlk katman yüksekliği nozül çapından büyük olamaz"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "Katman yüksekliği nozül çapından büyük olamaz"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Dolgu katmanları"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "G-code dışa aktarılıyor"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "G kodu oluşturma"
 
diff --git a/resources/localization/uk/PrusaSlicer_uk.po b/resources/localization/uk/PrusaSlicer_uk.po
index af0d1ad58..41a8403ac 100644
--- a/resources/localization/uk/PrusaSlicer_uk.po
+++ b/resources/localization/uk/PrusaSlicer_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2021-02-03 17:15+0100\n"
 "Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
 "Language-Team: \n"
@@ -591,7 +591,7 @@ msgstr "Активний"
 msgid "PrusaSlicer version"
 msgstr "Версія PrusaSlicer"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "друк"
 
@@ -599,17 +599,17 @@ msgstr "друк"
 msgid "filaments"
 msgstr "філаменти"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA-друк"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA-матеріал"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "принтер"
 
@@ -668,7 +668,7 @@ msgstr "Стандартний"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "Всі"
 
@@ -755,7 +755,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "філамент"
 
@@ -846,7 +846,7 @@ msgstr ""
 "конфігурації."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr "Перезавантажити з диска"
 
@@ -1152,7 +1152,7 @@ msgstr "Завершити"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "Скасувати"
 
@@ -1216,7 +1216,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1693,8 +1693,8 @@ msgid "parameter name"
 msgstr "назва параметра"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "Н/Д"
 
@@ -1901,7 +1901,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "Додати"
 
@@ -2103,7 +2103,7 @@ msgid "Wipe"
 msgstr "Витирання"
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "Параметри"
 
@@ -2374,7 +2374,7 @@ msgid "Add..."
 msgstr "Додати..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "Видалити все"
 
@@ -3277,7 +3277,7 @@ msgstr "Критична помилка"
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
@@ -3287,7 +3287,7 @@ msgstr ""
 "пошкоджений. Спробуйте вручну видалити файл, щоб оговтатися від помилки. Це "
 "не вплине на профілі користувачів."
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
@@ -3295,12 +3295,12 @@ msgstr ""
 "Помилка під час розбору файлу конфігурації PrusaGCodeViewer, можливо, він "
 "пошкоджений. Спробуйте вручну видалити файл, щоб оговтатися від помилки."
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3312,7 +3312,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3321,19 +3321,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3343,7 +3343,7 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -3352,46 +3352,46 @@ msgstr ""
 "%s\n"
 "Бажаєте продовжити?"
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr "Пам'ятати мій вибір"
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr "Завантаження конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr "Див. Сторінку випусків."
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr "Підготовка вкладок параметрів"
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3404,24 +3404,24 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 "У вас є наступні пресети із збереженими параметрами для \"Завантаження хоста "
 "друку(\"Print Host upload\")\""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
@@ -3431,7 +3431,7 @@ msgstr ""
 "параметрах принтера.\n"
 "Ці параметри будуть доступні у налаштуваннях фізичних принтерів."
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
@@ -3441,169 +3441,169 @@ msgstr ""
 "їх створення.\n"
 "Примітка: Цю назву можна змінити пізніше в налаштуваннях фізичних принтерів"
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr "Інформація"
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "Пере-створення"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "Завантаження поточних пресетів"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "Завантаження режиму перегляду"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "Виберіть один файл (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "Виберіть один чи кілька файлів (STL/OBJ/AMF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr "Виберіть один файл (GCODE/.GCO/.G/.ngc/NGC):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "Зміна мови застосування"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "Оберіть мову"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "Мова"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "модифікований"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "Запустити %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "Знімки конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "Перегляньте / активізуйте знімки конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "Зробіть знімок конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "Зробіть знімок конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr "Перевірити наявність оновлень конфігурації"
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&Преференції"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "Преференції застосування"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "Простий"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "Простий режим перегляду"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr "Розширений"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "Розширений режим перегляду"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "Експерт"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "Режим перегляду Експерт"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "Режим"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "Режим перегляду %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr "Мова"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr "Прошити принтер"
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "Завантажте імідж прошивки на Arduino-принтер"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "Назва знімку"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr "Не вдалося активувати знімок конфігурації."
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "Вибір мови"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3611,98 +3611,98 @@ msgstr ""
 "Переключення мови спричинить перезапуск програми.\n"
 "Ви втратите вміст платеру."
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "Ви хочете продовжити?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&Конфігурація"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr "Завантаження все ще триває"
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr "Зупинити їх і продовжувати в будь-якому випадку?"
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr "Триває завантаження"
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 "За технологією SLA неможливо надрукувати об'єкти, що складаються з декількох "
 "частин."
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 "Будь ласка, перевірте свій список об'єктів перед тим, як змінити пресет."
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr "Виберіть файл G-коду:"
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr "Заборонити відкриття гіперпосилань у браузері"
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr "PrusaSlicer: Не питай мене більше"
 
@@ -3808,7 +3808,7 @@ msgstr "Плінтус та край"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3818,7 +3818,7 @@ msgid "Advanced"
 msgstr "Розширений"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3832,8 +3832,8 @@ msgid "Supports"
 msgstr "Підтримки"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3843,8 +3843,8 @@ msgstr "Підтримки"
 msgid "Pad"
 msgstr "Подушка"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3947,7 +3947,7 @@ msgstr "Експортувати як STL"
 msgid "Reload the selected volumes from disk"
 msgstr "Перезавантажити вибрані часті з диска"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3973,19 +3973,19 @@ msgstr "Масштабувати під область друку"
 msgid "Scale the selected object to fit the print volume"
 msgstr "Масштабуйте вибраний об'єкт відповідно до об'єму столу"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr "Конвертувати з імперських одиниць"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr "Повернути конвертацію з імперських одиниць"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4256,7 +4256,7 @@ msgstr ""
 msgid "Loading"
 msgstr "Завантаження"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr "Завантаження файлу"
 
@@ -4697,7 +4697,7 @@ msgstr "Видалити параметр"
 msgid "Delete Option %s"
 msgstr "Видалити параметр %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "Змінити параметр %s"
@@ -4816,18 +4816,18 @@ msgstr "Маркер інструменту"
 msgid "Legend/Estimated printing time"
 msgstr "Легенда / Приблизний час друку"
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr "Більше"
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4988,13 +4988,13 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 "Ви не можете завантажувати SLA-проект, що містить об'єкт, який складається з "
 "кількох частин"
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "Увага!"
 
@@ -5035,11 +5035,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr "Завантажити конфігурацію з INI/AMF/3MF/GCODE та об’єднати"
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "Експорт G-коду"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "Надіслання G-коду"
 
@@ -5433,7 +5433,7 @@ msgstr "Показати / Сховати легенду та приблизни
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "Попередній перегляд"
@@ -5551,29 +5551,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "Параметри друку"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "Параметри матеріалу"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "Параметри філаменту"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "Параметри принтеру"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -6086,7 +6086,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -6195,9 +6195,9 @@ msgstr "G-код"
 msgid "Save zip file as:"
 msgstr "Зберегти zip-файл як:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "Нарізання"
 
@@ -6466,7 +6466,7 @@ msgstr "ПОМИЛКА:"
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr "ЗАСТЕРЕЖЕННЯ:"
 
@@ -6492,8 +6492,8 @@ msgstr "Екземпляри"
 msgid "Instance %d"
 msgstr "Екземпляр %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "Шари"
 
@@ -6763,12 +6763,12 @@ msgstr "Під об’єктем"
 msgid "Around object"
 msgstr "Навколо об'єкта"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "Надіслати на принтер"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "Нарізати зараз"
 
@@ -6879,7 +6879,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr "Не вдалося від'єднати пристрій %s (%s)."
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "Новий проект"
 
@@ -6887,7 +6887,7 @@ msgstr "Новий проект"
 msgid "Expand sidebar"
 msgstr "Розгорнути бічну панель"
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6898,12 +6898,12 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6915,11 +6915,11 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6933,15 +6933,15 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6955,18 +6955,18 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "Виявлено об'єкт, що складається з кількох частин"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
@@ -6974,11 +6974,11 @@ msgstr ""
 "Цей файл не можна завантажити у простому режимі. Ви хочете перейти в "
 "розширений режим?"
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "Виявлено розширені дані"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
@@ -6987,7 +6987,7 @@ msgstr ""
 "Ви не можете додати об’єкт(и) із %s через те, що один або деякі з них "
 "складається з декількох частин"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
@@ -6997,7 +6997,7 @@ msgstr ""
 "Замість того, щоб розглядати їх як кілька об'єктів, чи потрібно розглянути\n"
 "ці файл як єдиний об'єкт, що має декілька частин?"
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
@@ -7005,139 +7005,139 @@ msgstr ""
 "Ваш об'єкт видався занадто великим, тому він автоматично зменшився "
 "відповідно до вашої полотна друку."
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "Об'єкт занадто великий?"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "Експорт STL-файлу:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "Експортувати AMF-файл:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "Зберегти файл як:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "Експорт OBJ-файлу:"
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "Видалити об'єкт"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "Скинути проект"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "Розділити на об'єкти"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "Некоректні дані"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "На даний час виконується інший експорт."
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr "Будь ласка, виберіть файл для перезавантаження"
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr "Вибраний файл"
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr "Перезавантажити з:"
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr "Не вдається перезавантажити:"
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr "Помилка під час перезавантаження"
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr "Перезавантажити все з диска"
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr "Існують активні попередження щодо нарізаних моделей:"
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr "згенеровані попередження"
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "Перегляд у 3D-редакторі"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -7145,171 +7145,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "Завантажити проект"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "Імпорт об'єкту"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "Імпорт об'єктів"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr "не містить дійсного G-коду."
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr "Помилка під час завантаження GCODE-файлу"
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr "%s - Перетягнути файл проекту"
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr "Відкрити як проект"
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr "Імпорт тільки геометрії"
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr "Імпорт тільки конфігурації"
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr "Виберіть дію, яку потрібно застосувати до файлу"
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr "Дія"
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr "Не показувати знову"
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr "Одночасно можна відкрити лише один файл .gcode."
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr "Перетягування файлу G-коду"
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "Завантажити файл"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "Завантажити файли"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr "Усі об’єкти буде видалено, продовжити?"
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "Видалити вибрані об'єкти"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "Збільшити кількість копій"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "Зменшити кількість копій"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr "Введіть кількість копій об'єкта:"
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr "Кількість копій обраного об'єкта"
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "Встановити кількість копій на %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "Вирізати площиною"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "Зберегти G-код файл як:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "Експорт"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "Вставити з буферу обміну"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "Загальне"
 
@@ -7452,7 +7452,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7466,7 +7466,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7477,7 +7477,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -8013,11 +8013,11 @@ msgstr "Надіслання G-коду на хост друку"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "Завантажити на хост принтера з таким ім’ям файлу:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "За потреби використовуйте скісні риски (/) як роздільник каталогів."
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr "Group"
 
@@ -8026,18 +8026,18 @@ msgstr "Group"
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8482,7 +8482,7 @@ msgstr "повне ім'я профілю"
 msgid "symbolic profile name"
 msgstr "символічне ім'я профілю"
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "Шари та периметри"
 
@@ -8566,11 +8566,11 @@ msgstr "Перекриття"
 msgid "Flow"
 msgstr "Потік"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "Інше"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "Параметри виводу"
 
@@ -8582,11 +8582,11 @@ msgstr "Послідовне друкування"
 msgid "Extruder clearance"
 msgstr "Область зіткнення екструдера"
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "Вихідний файл"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "Скрипти пост-обробки"
 
@@ -8594,19 +8594,20 @@ msgstr "Скрипти пост-обробки"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "Примітки"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "Залежності"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "Залежності профілю"
 
@@ -8682,7 +8683,7 @@ msgid "Ramming settings"
 msgstr "Налаштування раммінгу"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "Користувацький G-код"
@@ -8729,8 +8730,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "Розмір і координати"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "Можливості"
 
@@ -8799,11 +8800,11 @@ msgstr "Нахил"
 msgid "Tilt time"
 msgstr "Час нахилу"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "Поправки"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "Експозиція"
 
@@ -8971,42 +8972,46 @@ msgstr "Ви впевнені, що хочете %1% вибраний пресе
 msgid "%1% Preset"
 msgstr "%1% пресет"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "Встановити"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "Знайти"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "Тільки цілі слова"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 "Механічних обмеження публікуватимуться в G-код і використовуватимуться для "
 "розрахунку часу друку."
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
@@ -9016,7 +9021,7 @@ msgstr ""
 "використовуватися для оцінки часу друку, що, отже, може бути неточним, "
 "оскільки принтер може застосовувати інший набір механічних обмежень."
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
@@ -9024,12 +9029,12 @@ msgstr ""
 "Механічних обмеження не встановлені, тому оцінка часу друку може бути "
 "неточною."
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "ЗАКРИТИЙ ЗАМОК"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
@@ -9037,12 +9042,12 @@ msgstr ""
 "вказує на те, що параметри збігаються із системними (або за замовчуванням) "
 "значеннями для поточної групи опцій"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "ВІДКРИТИЙ ЗАМОК"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -9054,12 +9059,12 @@ msgstr ""
 "Клацніть, щоб скинути всі налаштування для поточної групи опцій до системних "
 "значень (або за замовчуванням)."
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "БІЛА КУЛЯ"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -9067,12 +9072,12 @@ msgstr ""
 "для лівої кнопки: вказує на несистемний (або не за замовчуванням) пресет,\n"
 "для правої кнопки: вказує на те, що параметри не були змінені."
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "СТРІЛКА НАЗАД"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -9084,7 +9089,7 @@ msgstr ""
 "Клацніть, щоб скинути всі параметри для поточної групи параметрів до "
 "останнього збереженого пресету."
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
@@ -9092,7 +9097,7 @@ msgstr ""
 "Значок \"ЗАКРИТИЙ ЗАМОК\" вказує на те, що параметри збігаються із "
 "системними (або за замовчуванням) значеннями для поточної групи опцій"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -9105,12 +9110,12 @@ msgstr ""
 "Клацніть, щоб скинути всі налаштування для поточної групи опцій до системних "
 "значень (або за замовчуванням)."
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 "Значок \"БІЛА КУЛЯ\" вказує на несистемний (або не за замовчуванням) пресет."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
@@ -9118,7 +9123,7 @@ msgstr ""
 "Значок \"БІЛА КУЛЯ\" вказує на те, що параметри збігаються тими, які є в "
 "останньому збереженому пресеті для поточної групи опцій."
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -9130,7 +9135,7 @@ msgstr ""
 "Клацніть, щоб скинути всі параметри для поточної групи параметрів до "
 "останнього збереженого пресету."
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
@@ -9138,7 +9143,7 @@ msgstr ""
 "Значок \"ЗАКРИТИЙ ЗАМОК\" вказує на те, що значення збігається із системним "
 "(або за замовчуванням)."
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -9148,7 +9153,7 @@ msgstr ""
 "дорівнює системному (або за замовчуванням) значенню.\n"
 "Клацніть, щоб скинути поточне значення до системного (або за замовчуванням)."
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
@@ -9156,7 +9161,7 @@ msgstr ""
 "Значок \"БІЛА КУЛЯ\" вказує на те, що значення збігається з значенням "
 "збереженого пресету."
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -9166,31 +9171,31 @@ msgstr ""
 "дорівнює останньому збереженому пресету.\n"
 "Клацніть, щоб скинути поточне значення до останнього збереженого пресету."
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "Матеріал"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "Головка підтримки"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "Стовп підтримки"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "З'єднання опорних стовпів і стиків"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "Автоматичне згенерування"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
@@ -9199,74 +9204,74 @@ msgstr ""
 "\"%1%\" вимкнено, оскільки в категорії \"%3%\" увімкнено \"%2%\".\n"
 "Щоб увімкнути \"%1%\", вимкніть \"%2%\""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "Підняття об’єкта"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "Подушка навколо об’єкта"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr "Невизначений"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "Незбережені зміни"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr "Перемикання пресетів: незбережені зміни"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr "Старе значення"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr "Нове значення"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr "Перенести"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr "Відхилити"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "Зберегти"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -9274,11 +9279,11 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr "PrusaSlicer запам'ятає ваші дії."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
@@ -9287,56 +9292,57 @@ msgstr ""
 "Відвідайте \"Преференції\" та встановіть прапорець \"%1%\"\n"
 "щоб знову запитати про незбережені зміни."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 "Деякі поля занадто довгі, щоб вміститися у чарунку. Клацніть правою кнопкою "
 "миші, щоб відкрити повний текст."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr "Усі зміни параметрів буде відхилено."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr "Зберегти вибрані параметри."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr "Перенести вибрані параметри до нещодавно вибраного пресету."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr "Зберегти вибрані параметри до пресету \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr "Перенести вибрані параметри до нещодавно вибраного пресету \"%1%\"."
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr "Пресет \"%1%\" має такі незбережені зміни:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
@@ -9345,7 +9351,7 @@ msgstr ""
 "Пресет \"%1%\" несумісний з новим профілем принтера, і він має такі "
 "незбережені зміни:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
@@ -9354,50 +9360,50 @@ msgstr ""
 "Пресет \"%1%\" несумісний з новим профілем друку, і він має такі незбережені "
 "зміни:"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr "Кількість екструдерів"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -10218,27 +10224,27 @@ msgstr "не вдалося перевірити"
 msgid "write calledback failed"
 msgstr "помилка запису зворотного виклику"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "Усі об'єкти знаходяться поза просторем друку."
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "Надані параметри спричинять порожній друк."
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 "Деякі предмети розташовано занадто близько; ваш екструдер зіткнеться з ними."
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 "Деякі предмети занадто високі, і їх неможливо надрукувати без зіткнення "
 "екструдера."
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
@@ -10248,7 +10254,7 @@ msgstr ""
 "видаліть усі, крім останнього об'єкта, або ввімкніть послідовний режим за "
 "допомогою \"повних об'єктів\" (\"complete_objects\")."
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
@@ -10256,7 +10262,7 @@ msgstr ""
 "Варіант спіральної вази можна використовувати лише під час друку одно-"
 "матеріальних об’єктів."
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
@@ -10264,7 +10270,7 @@ msgstr ""
 "Вежа витирання підтримується лише в тому випадку, якщо всі екструдери мають "
 "однаковий діаметр сопла і використовують філаменти одинакового діаметру."
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
@@ -10272,7 +10278,7 @@ msgstr ""
 "Наразі вежа витирання підтримується лише для G-кодів, сумісних з Marlin, "
 "RepRap/Sprinter, RepRapFirmware та Repetier ."
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
@@ -10280,18 +10286,18 @@ msgstr ""
 "Наразі вежа витирання підтримує лише відносну адресацію екструдерів "
 "(use_relative_e_distances = 1)."
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 "Наразі запобігання просочування не підтримується з увімкненою вежею "
 "витирання."
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr "Наразі вежа витирання не підтримує об'ємне E (use_volumetric_e = 0)."
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
@@ -10299,7 +10305,7 @@ msgstr ""
 "Наразі вежа витирання не підтримується для багато-матеріального послідовного "
 "друку."
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
@@ -10307,7 +10313,7 @@ msgstr ""
 "Вежа витирання для кількох об’єктів підтримується лише у випадку, коли вони "
 "мають однакову висоту шару"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
@@ -10315,7 +10321,7 @@ msgstr ""
 "Вежа витирання для кількох об’єктів підтримується лише у випадку, коли вони "
 "надруковані на рівній кількості шарів плоту"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -10323,7 +10329,7 @@ msgstr ""
 "Вежа витирання для кількох об’єктів підтримується лише у випадку, коли вони "
 "надруковані з однаковою відстанню support_material_contact_distance"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
@@ -10331,7 +10337,7 @@ msgstr ""
 "Вежа витирання для кількох об’єктів підтримується лише у випадку, коли вони "
 "нарізані однаково."
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
@@ -10339,24 +10345,24 @@ msgstr ""
 "Вежа витирання підтримується лише в тому випадку, якщо всі об’єкти мають "
 "однакову висоту змінного шару"
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "Одному або декільком об’єктам було призначено екструдер, якого принтер не "
 "має."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% мм є занадто низьким для друку на висоті шару %3% мм"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "%1% = %2% мм є надмірно для друку з діаметром сопла %3% мм"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -10368,7 +10374,7 @@ msgstr ""
 "0 або support_material_interface_extruder == 0), усі сопла повинні мати "
 "однаковий діаметр."
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
@@ -10376,7 +10382,7 @@ msgstr ""
 "Для того, щоб вежа витирання працювала з розчинними підтримками, шари "
 "підтримки повинні бути синхронізовані з шарами об'єкта."
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -10388,27 +10394,46 @@ msgstr ""
 "значення support_material_extruder і support_material_interface_extruder "
 "повинні бути встановлені на 0)."
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "Висота першого шару не може перевищувати діаметр сопла"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "Висота шару не може перевищувати діаметр сопла"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "Шари наповнення"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "Експортування G-коду"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "Генерування G-коду"
 
diff --git a/resources/localization/zh_CN/PrusaSlicer_zh_CN.po b/resources/localization/zh_CN/PrusaSlicer_zh_CN.po
index bd796eca9..d702c6479 100644
--- a/resources/localization/zh_CN/PrusaSlicer_zh_CN.po
+++ b/resources/localization/zh_CN/PrusaSlicer_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2019-09-06 16:24+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -552,7 +552,7 @@ msgstr "激活"
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "打印"
 
@@ -560,17 +560,17 @@ msgstr "打印"
 msgid "filaments"
 msgstr "耗材"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA 打印"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA 材料"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "打印机"
 
@@ -629,7 +629,7 @@ msgstr "标准"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "所有"
 
@@ -715,7 +715,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "丝"
 
@@ -799,7 +799,7 @@ msgid ""
 msgstr "此外，在应用更新之前，将创建整个配置的备份快照。"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1085,7 +1085,7 @@ msgstr "&结束"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "取消"
 
@@ -1149,7 +1149,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1592,8 +1592,8 @@ msgid "parameter name"
 msgstr "参数名称"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr "N/A"
 
@@ -1794,7 +1794,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "加入"
 
@@ -1996,7 +1996,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "选项"
 
@@ -2263,7 +2263,7 @@ msgid "Add..."
 msgstr "添加..."
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr "全部删除"
 
@@ -3143,25 +3143,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3173,7 +3173,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3182,19 +3182,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3204,53 +3204,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3263,198 +3263,198 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "重造"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr "加载当前预设"
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "加载模式视图"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr "选择一个文件 (3MF/AMF):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "选择一个或多个文件  (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "更改应用程序语言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "选择语言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "语言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "修改"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "运行 %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "检查/激活配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "保存配置 &快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "捕获配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&首选项"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "应用程序首选项"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "简单"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "简单界面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "高级界面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "专家"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "专家界面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr "%s 视图模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "将固件镜像上传到基于 arduino 的打印机"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "快照名称"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr "语言选择"
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
@@ -3462,93 +3462,93 @@ msgstr ""
 "切换语言将触发应用程序重新启动。\n"
 "您将丢失未保存的内容。"
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr "是否继续？"
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&配置"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "无法使用 SLA 技术打印多部分对象。"
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "请在预设更改之前检查对象列表。"
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3654,7 +3654,7 @@ msgstr "裙边"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3664,7 +3664,7 @@ msgid "Advanced"
 msgstr "高级"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3678,8 +3678,8 @@ msgid "Supports"
 msgstr "支持"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3689,8 +3689,8 @@ msgstr "支持"
 msgid "Pad"
 msgstr "垫"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3793,7 +3793,7 @@ msgstr "导出为 STL"
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3819,19 +3819,19 @@ msgstr "缩放打印体积"
 msgid "Scale the selected object to fit the print volume"
 msgstr "缩放所选对象以适合可打印体积"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4085,7 +4085,7 @@ msgstr ""
 msgid "Loading"
 msgstr "载入中"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4507,7 +4507,7 @@ msgstr "删除参数"
 msgid "Delete Option %s"
 msgstr "删除选项 %s"
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr "更改选项 %s"
@@ -4626,18 +4626,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4797,11 +4797,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "注意！"
 
@@ -4842,11 +4842,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "导出 G-code"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "发送 G 代码"
 
@@ -5227,7 +5227,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "预览"
@@ -5339,29 +5339,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "打印设置"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "材料设置"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "耗材丝设置"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "打印机设置"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5871,7 +5871,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -5980,9 +5980,9 @@ msgstr "G-code"
 msgid "Save zip file as:"
 msgstr "将 zip 文件另存为："
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "切片"
 
@@ -6238,7 +6238,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6264,8 +6264,8 @@ msgstr "实例"
 msgid "Instance %d"
 msgstr "实例 %d"
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "图层"
 
@@ -6523,12 +6523,12 @@ msgstr "对象底部"
 msgid "Around object"
 msgstr "对象周围"
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "发送到打印机"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "立即切片"
 
@@ -6633,7 +6633,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr "新项目"
 
@@ -6641,7 +6641,7 @@ msgstr "新项目"
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6650,12 +6650,12 @@ msgid_plural ""
 "PrusaSlicer"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6665,11 +6665,11 @@ msgid_plural ""
 "These objects have been removed from the model"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6681,15 +6681,15 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6701,180 +6701,180 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "检测到多部分对象"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "检测到高级数据"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr "不能从 %s 中添加对象, 因为其中一个或一些有多个部分"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr "对象看起来太大，因此会自动缩小，以适应构建板。"
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "对象太大？"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "导出 STL 文件："
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "导出 AMF 文件："
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "将文件另存为："
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr "导出 OBJ 文件："
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr "删除对象"
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr "重置项目"
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr "拆分为对象"
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "无效数据"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "当前正在运行另一个导出作业。"
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr "3D 编辑器视图"
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6882,171 +6882,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr "加载项目"
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr "导入对象"
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr "导入对象"
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr "加载文件"
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr "加载文件"
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr "删除选定对象"
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr "增加实例"
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr "减少实例"
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr "将副本数设置为 %d"
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr "按平面切割"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "将 G-code 文件另存为:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "导出"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr "从剪贴板粘贴"
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "常规"
 
@@ -7172,7 +7172,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7186,7 +7186,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7197,7 +7197,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7704,11 +7704,11 @@ msgstr "向打印机主机发送 G-Code"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "使用以下文件名上传到打印机主机："
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "如果需要，请使用正向斜杠 （ / ） 作为目录分隔符。"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7717,18 +7717,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr "ID"
@@ -8166,7 +8166,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "层和轮廓"
 
@@ -8250,11 +8250,11 @@ msgstr "交叠"
 msgid "Flow"
 msgstr "流量"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "其他"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "输出选项"
 
@@ -8266,11 +8266,11 @@ msgstr "顺序打印"
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "输出文件"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "后处理脚本"
 
@@ -8278,19 +8278,20 @@ msgstr "后处理脚本"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "备注"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "依赖"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "配置文件依赖"
 
@@ -8364,7 +8365,7 @@ msgid "Ramming settings"
 msgstr "冲击设置"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "自定义 G-code"
@@ -8402,8 +8403,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "大小和坐标"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "权限"
 
@@ -8471,11 +8472,11 @@ msgstr "倾斜"
 msgid "Tilt time"
 msgstr "倾斜时间"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "修正"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "曝光"
 
@@ -8630,69 +8631,73 @@ msgstr "是否确实要将所选预设 %1%？"
 msgid "%1% Preset"
 msgstr "%1% 预设"
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr "设置"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "查找"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "整字"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr "锁定锁"
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr "指示设置与当前选项组的系统(或默认值)值相同"
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr "解锁锁"
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8702,12 +8707,12 @@ msgstr ""
 "指示某些设置已更改,并且不等于当前选项组的系统(或默认值)值。\n"
 "单击\"锁定锁定\"图标可将当前选项组的所有设置重置为系统(或默认值)值。"
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr "白色子弹"
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
@@ -8715,12 +8720,12 @@ msgstr ""
 "对于左侧按钮:指示非系统(或非默认)预设,\n"
 "对于右侧按钮:指示设置尚未修改。"
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr "后箭头"
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8730,13 +8735,13 @@ msgstr ""
 "指示设置已更改,不等于当前选项组的最后一个保存预设。\n"
 "单击\"后退箭头\"图标可将当前选项组的所有设置重置为上次保存的预设。"
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr "锁定锁定图标表示设置与当前选项组的系统(或默认值)值相同"
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8746,17 +8751,17 @@ msgstr ""
 "锁定的锁 图标指示某些设置已更改,并且不等于当前选项组的系统(或默认值)值。\n"
 "单击此处可将当前选项组的所有设置重置为系统(或默认值)值。"
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "白色 BULLET 图标表示非系统(或非默认)预设。"
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr "白色子弹图标表示设置与当前选项组上次保存的预设中的设置相同。"
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8766,13 +8771,13 @@ msgstr ""
 "后退箭头图标表示设置已更改，不等于当前选项组的最后保存预设。\n"
 "单击此处可将当前选项组的所有设置重置为上次保存的预设。"
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr "锁定锁定图标表示该值与系统(或默认值)值相同。"
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
@@ -8781,13 +8786,13 @@ msgstr ""
 "锁定的锁 图标指示该值已更改,不等于系统(或默认值)值。\n"
 "单击以将当前值重置为系统(或默认值)值。"
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr "白色子弹图标表示该值与上次保存的预设中的值相同。"
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -8796,105 +8801,105 @@ msgstr ""
 "后退箭头图标指示该值已更改，不等于上次保存的预设。\n"
 "单击以将当前值重置为上次保存的预设。"
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "材料"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "支撑头"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "支撑支柱"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "支撑杆和接头的连接"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "自动生成"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "对象高程"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr "对象周围填充"
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "未保存的修改"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "保存"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -8902,120 +8907,121 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9799,83 +9805,83 @@ msgstr "验证失败"
 msgid "write calledback failed"
 msgstr "写入回叫失败"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "所有对象都在打印范围之外。"
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "当前提供的设置将导致空打印。"
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "有些对象太近; 你的挤出机会和他们相撞。"
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "某些对象太高, 无法在挤出机不冲突的情况下打印。"
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr "螺旋花瓶选项只能在打印单个材质对象时使用。"
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 "仅当所有挤出机具有相同的喷嘴直径并使用相同直径的耗材丝时,才支持擦料塔。"
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr "擦料塔目前仅支持相对挤出机寻址 (use_relative_e_distances=1)。"
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr "启用擦料塔时，当前不支持 Ooze 预防。"
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr "仅当多个对象具有相等的图层高度时,才支持擦料塔"
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr "只有在相同数量的基座层上打印的对象时, 才支持擦料塔"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -9883,34 +9889,34 @@ msgstr ""
 "只有在使用相同的support_material_contact_distance（支撑材料距离）打印多个对象"
 "时, 才支持擦料塔"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr "只有在多个对象被平均切割的情况下, 才支持擦料塔。"
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "为一个或多个对象分配了打印机没有的挤出机。"
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr "%1%=%2% mm 太低，在图层高度 %3% mm 时无法打印"
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr "过量 %1%=%2% mm 可打印，使用喷嘴直径 %3% mm"
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -9921,13 +9927,13 @@ msgstr ""
 "(support_material_extruder == 0 或 support_material_interface_extruder == 0)"
 "打印支撑物, 则所有喷嘴的直径必须相同。"
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr "要使擦料塔与可溶性支撑配合使用, 支撑层需要与对象图层同步。"
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -9938,27 +9944,46 @@ msgstr ""
 "溶支撑于的支架。(support_material_extruder  和"
 "support_material_interface_extruder 都需要设置为 0)。"
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "第一层高度不能大于喷嘴直径"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "层高度不能大于喷嘴直径"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr "填充图层"
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr "导出 G 代码"
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr "生成 G 代码"
 
diff --git a/resources/localization/zh_TW/PrusaSlicer_zh_TW.po b/resources/localization/zh_TW/PrusaSlicer_zh_TW.po
index 93e02f3fe..662aae16f 100644
--- a/resources/localization/zh_TW/PrusaSlicer_zh_TW.po
+++ b/resources/localization/zh_TW/PrusaSlicer_zh_TW.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: 2019-05-22 10:35+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com> , patched traditional "
 "chinese by Cheng-Hsien Ho <taksito@gmail.com>\n"
@@ -550,7 +550,7 @@ msgstr ""
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr "列印"
 
@@ -558,17 +558,17 @@ msgstr "列印"
 msgid "filaments"
 msgstr "耗材"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr "SLA 列印"
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr "SLA 材料"
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr "印表機"
 
@@ -627,7 +627,7 @@ msgstr "標準"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr "所有"
 
@@ -712,7 +712,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr "耗材"
 
@@ -791,7 +791,7 @@ msgid ""
 msgstr "此外, 在應用更新之前, 將創建整個配置的備份快照。"
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1077,7 +1077,7 @@ msgstr "&結束"
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr "取消"
 
@@ -1141,7 +1141,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1584,8 +1584,8 @@ msgid "parameter name"
 msgstr "參數名稱"
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr ""
 
@@ -1783,7 +1783,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr "加入"
 
@@ -1985,7 +1985,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr "選項"
 
@@ -2252,7 +2252,7 @@ msgid "Add..."
 msgstr ""
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr ""
 
@@ -3128,25 +3128,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3158,7 +3158,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3167,19 +3167,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3189,53 +3189,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3248,290 +3248,290 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr "再造"
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr "載入模式視圖"
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr "選擇一個或多個文件  (STL/OBJ/AMF/3MF/PRUSA):"
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr "更改應用程序語言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr "選擇語言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr "語言"
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr "修改"
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr "運行 %s"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr "&配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr "檢查/啟用配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr "獲取配置和快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr "擷取配置快照"
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr "&首選項"
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr "應用程序首選項"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr "簡單"
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr "簡單介面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr "高級介面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr "專家"
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr "專家介面模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr "模式"
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr "將韌體鏡像檔上傳到基於 arduino 的印表機"
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr "快照名稱"
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr "&配置"
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr "無法使用 SLA 技術列印多部分對象。"
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr "在預設更改之前, 請檢查對象列表。"
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3637,7 +3637,7 @@ msgstr "環邊和裙邊"
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3647,7 +3647,7 @@ msgid "Advanced"
 msgstr "進階"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3661,8 +3661,8 @@ msgid "Supports"
 msgstr "支撐"
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3672,8 +3672,8 @@ msgstr "支撐"
 msgid "Pad"
 msgstr "墊"
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3776,7 +3776,7 @@ msgstr "導出爲 STL"
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3802,19 +3802,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4068,7 +4068,7 @@ msgstr ""
 msgid "Loading"
 msgstr "載入中"
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4485,7 +4485,7 @@ msgstr ""
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr ""
@@ -4604,18 +4604,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4775,11 +4775,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr "注意！"
 
@@ -4820,11 +4820,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr "導出 G-code"
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr "發送 G 代碼"
 
@@ -5205,7 +5205,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr "預覽"
@@ -5317,29 +5317,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr "列印設置"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr "材料設置"
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr "耗材絲設置"
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr "印表機設置"
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5849,7 +5849,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -5958,9 +5958,9 @@ msgstr "G-code"
 msgid "Save zip file as:"
 msgstr "將 zip 文件另存爲:"
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr "切片"
 
@@ -6216,7 +6216,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6242,8 +6242,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr "圖層"
 
@@ -6499,12 +6499,12 @@ msgstr ""
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr "發送到印表機"
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr "立即切片"
 
@@ -6609,7 +6609,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr ""
 
@@ -6617,7 +6617,7 @@ msgstr ""
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6626,12 +6626,12 @@ msgid_plural ""
 "PrusaSlicer"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6641,11 +6641,11 @@ msgid_plural ""
 "These objects have been removed from the model"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6657,15 +6657,15 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6677,180 +6677,180 @@ msgid_plural ""
 "the dimensions of these objects?"
 msgstr[0] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr "檢測到多部分對象"
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr "檢測到的高級數據"
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr "不能從 %s 中添加對象, 因爲其中一個或一些有多個部分"
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr "您的對象看起來太大, 因此它被自動縮小以適合您的列印牀。"
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr "對象太大？"
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr "導出 STL 文件:"
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr "導出 AMF 文件:"
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr "將文件另存爲:"
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr "無效數據"
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr "另一個導出作業當前正在運行。"
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6858,171 +6858,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr "將 G-code 文件另存爲:"
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr "導出"
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr "常規"
 
@@ -7148,7 +7148,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7162,7 +7162,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7173,7 +7173,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7678,11 +7678,11 @@ msgstr "向印表機主機發送 G-Code"
 msgid "Upload to Printer Host with the following filename:"
 msgstr "使用以下文件名上載到印表機主機:"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr "如果需要, 使用正向斜槓 (/) 作爲目錄分隔符。"
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7691,18 +7691,18 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
 msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
 msgid "Upload and Simulate"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
-msgstr ""
-
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
 msgid "ID"
 msgstr ""
@@ -8140,7 +8140,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr "層和輪廓"
 
@@ -8224,11 +8224,11 @@ msgstr "交疊"
 msgid "Flow"
 msgstr "流量"
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr "其他"
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr "輸出選項"
 
@@ -8240,11 +8240,11 @@ msgstr "順序列印"
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr "輸出文件"
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr "後處理腳本"
 
@@ -8252,19 +8252,20 @@ msgstr "後處理腳本"
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr "備註"
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr "依賴"
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr "配置文件依賴"
 
@@ -8338,7 +8339,7 @@ msgid "Ramming settings"
 msgstr "衝壓設置"
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr "自定義 G-code"
@@ -8376,8 +8377,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr "尺寸和座標"
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr "權限"
 
@@ -8442,11 +8443,11 @@ msgstr "傾斜"
 msgid "Tilt time"
 msgstr "傾斜時間"
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr "修正"
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr "曝光"
 
@@ -8600,69 +8601,73 @@ msgstr ""
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr "尋找"
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr "整個字"
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8670,23 +8675,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8694,13 +8699,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8708,17 +8713,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr "白色子彈圖標表示設置與當前選項組上次保存的預設中的設置相同。"
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8728,26 +8733,26 @@ msgstr ""
 "\"後退箭頭\" 圖標表示設置已更改, 與當前選項組的上次保存的預設不相等。\n"
 "單擊可將當前選項組的所有設置重置爲上次保存的預設。"
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr "白色子彈圖標表示該值與上次保存的預設中的值相同。"
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
@@ -8756,105 +8761,105 @@ msgstr ""
 "\"後退箭頭\" 圖標表示該值已更改, 不等於上次保存的預設。\n"
 "單擊可將當前值重置爲上次保存的預設。"
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr "材料"
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr "支撐頭部寬度"
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr "支撐支柱"
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr "支撐杆和連接點的連接"
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr "自動生成"
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr "對象高程"
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr "未保存的更改"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr "儲存"
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -8862,120 +8867,121 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
-#, boost-format
-msgid "Save the selected options to preset \"%1%\"."
-msgstr ""
-
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
+#, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9751,82 +9757,82 @@ msgstr "驗證失敗"
 msgid "write calledback failed"
 msgstr "寫回失敗"
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr "所有對象都在列印範圍之外。"
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr "當前提供的設置將導致空列印。"
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr "有些物體太過靠近; 你的擠出頭有機會和他們相撞。"
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr "有些物體太高, 無法在擠出頭不衝突的情況下列印。"
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr "\"螺旋花瓶\" 選項只能在列印單個材料對象時使用。"
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr "擦料塔目前僅支持相對擠出機尋址 (use_relative_e_distances=1)。"
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr "只有在相同數量的基座層上列印的對象時, 才支持擦料塔"
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
@@ -9834,34 +9840,34 @@ msgstr ""
 "只有在使用相同的support_material_contact_distance（支撐材料距離）列印多個對象"
 "時, 才支持擦料塔"
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr "只有在多個對象被平均切割的情況下, 才支持擦料塔。"
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr "爲一個或多個對象分配了印表機不存在的擠出機。"
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -9872,13 +9878,13 @@ msgstr ""
 "(support_material_extruder == 0 或 support_material_interface_extruder == 0)"
 "列印支撐物, 則所有噴嘴的直徑必須相同。"
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr "要使擦料塔與可溶性支撐配合使用, 支持層需要與對象圖層同步。"
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -9889,27 +9895,46 @@ msgstr ""
 "於的支架。(support_material_extruder  和support_material_interface_extruder "
 "都需要設置爲 0)。"
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr "第一層高度不能大於噴嘴直徑"
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr "層高度不能大於噴嘴直徑"
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr ""