Added Preferences files

xs/src/slic3r/GUI/Preferences.cpp

@@ -0,0 +1,120 @@
+#include "Preferences.hpp"
+#include "AppConfig.hpp"
+#include "OptionsGroup.hpp"
+
+namespace Slic3r {
+namespace GUI {
+
+void PreferencesDialog::build()
+{
+	auto app_config = get_app_config();
+	m_optgroup = std::make_shared<ConfigOptionsGroup>(this, _(L("General")));
+	m_optgroup->label_width = 200;
+	m_optgroup->m_on_change = [this](t_config_option_key opt_key, boost::any value){
+		m_values[opt_key] = boost::any_cast<bool>(value) ? "1" : "0";
+	};
+
+//    $optgroup->append_single_option_line(Slic3r::GUI::OptionsGroup::Option->new(
+//        opt_id = > 'version_check',
+//        type = > 'bool',
+//        label = > 'Check for updates',
+//        tooltip = > 'If this is enabled, Slic3r will check for updates daily and display a reminder if a newer version is available.',
+//        default = > $app_config->get("version_check") // 1,
+//        readonly = > !wxTheApp->have_version_check,
+//    ));
+
+	ConfigOptionDef def;
+	def.label = L("Remember output directory");
+	def.type = coBool;
+	def.tooltip = L("If this is enabled, Slic3r will prompt the last output directory "
+					  "instead of the one containing the input files.");
+	def.default_value = new ConfigOptionBool{ app_config->get("remember_output_path")[0] == '1' }; // 1;
+	Option option(def, "remember_output_path");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Auto-center parts");
+	def.type = coBool;
+	def.tooltip = L("If this is enabled, Slic3r will auto-center objects "
+					  "around the print bed center.");
+	def.default_value = new ConfigOptionBool{ app_config->get("autocenter")[0] == '1' }; // 1;
+	option = Option (def,"autocenter");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Background processing");
+	def.type = coBool;
+	def.tooltip = L("If this is enabled, Slic3r will pre-process objects as soon "
+					  "as they\'re loaded in order to save time when exporting G-code.");
+	def.default_value = new ConfigOptionBool{ app_config->get("background_processing")[0] == '1' }; // 1;
+	option = Option (def,"background_processing");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Disable USB/serial connection");
+	def.type = coBool;
+	def.tooltip = L("Disable communication with the printer over a serial / USB cable. "
+					  "This simplifies the user interface in case the printer is never attached to the computer.");
+	def.default_value = new ConfigOptionBool{ app_config->get("no_controller")[0] == '1' }; // 1;
+	option = Option (def,"no_controller");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Suppress \" - default - \" presets");
+	def.type = coBool;
+	def.tooltip = L("Suppress \" - default - \" presets in the Print / Filament / Printer "
+					  "selections once there are any other valid presets available.");
+	def.default_value = new ConfigOptionBool{ app_config->get("no_defaults")[0] == '1' }; // 1;
+	option = Option (def,"no_defaults");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Show incompatible print and filament presets");
+	def.type = coBool;
+	def.tooltip = L("When checked, the print and filament presets are shown in the preset editor "
+					  "even if they are marked as incompatible with the active printer");
+	def.default_value = new ConfigOptionBool{ app_config->get("show_incompatible_presets")[0] == '1' }; // 1;
+	option = Option (def,"show_incompatible_presets");
+	m_optgroup->append_single_option_line(option);
+
+	def.label = L("Use legacy OpenGL 1.1 rendering");
+	def.type = coBool;
+	def.tooltip = L("If you have rendering issues caused by a buggy OpenGL 2.0 driver, "
+					  "you may try to check this checkbox. This will disable the layer height "
+					  "editing and anti aliasing, so it is likely better to upgrade your graphics driver.");
+	def.default_value = new ConfigOptionBool{ app_config->get("use_legacy_opengl")[0] == '1' }; // 1;
+	option = Option (def,"use_legacy_opengl");
+	m_optgroup->append_single_option_line(option);
+
+	auto sizer = new wxBoxSizer(wxVERTICAL);
+	sizer->Add(m_optgroup->sizer, 0, wxEXPAND | wxBOTTOM | wxLEFT | wxRIGHT, 10);
+
+	auto buttons = CreateStdDialogButtonSizer(wxOK | wxCANCEL);
+	wxButton* btn = static_cast<wxButton*>(FindWindowById(wxID_OK, this));
+	btn->Bind(wxEVT_BUTTON, [this](wxCommandEvent&) { accept(); });
+	sizer->Add(buttons, 0, wxALIGN_CENTER_HORIZONTAL | wxBOTTOM, 10);
+
+	SetSizer(sizer);
+	sizer->SetSizeHints(this);
+}
+
+void PreferencesDialog::accept()
+{
+	if (m_values.find("no_controller")    != m_values.end()||
+		m_values.find("no_defaults")      != m_values.end()||
+		m_values.find("use_legacy_opengl")!= m_values.end()) {
+		warning_catcher(this, _(L("You need to restart Slic3r to make the changes effective.")));
+	}
+
+	auto app_config = get_app_config();
+	for (std::map<std::string, std::string>::iterator it = m_values.begin(); it != m_values.end(); ++it) {
+		app_config->set(it->first, it->second);
+	}
+
+	EndModal(wxID_OK);
+	Close();  // needed on Linux
+
+	// Nothify the UI to update itself from the ini file.
+	if (m_event_preferences > 0) {
+		wxCommandEvent event(m_event_preferences);
+		get_app()->ProcessEvent(event);
+	}
+}
+
+} // GUI
+} // Slic3r

xs/src/slic3r/GUI/Preferences.hpp

@@ -0,0 +1,27 @@
+#include "GUI.hpp"
+
+#include <wx/dialog.h>
+#include <map>
+
+namespace Slic3r {
+namespace GUI {
+
+class ConfigOptionsGroup;
+
+class PreferencesDialog : public wxDialog
+{
+	std::map<std::string, std::string>	m_values;
+	std::shared_ptr<ConfigOptionsGroup>	m_optgroup;
+	int		m_event_preferences;
+public:
+	PreferencesDialog(wxWindow* parent, int event_preferences) : wxDialog(parent, wxID_ANY, _(L("Preferences")),
+		wxDefaultPosition, wxDefaultSize), m_event_preferences(event_preferences) {	build(); }
+	~PreferencesDialog(){ }
+
+	void	build();
+	void	accept();
+};
+
+} // GUI
+} // Slic3r
+