From d7998870c7c763ea9ed0334658fc86ee6c60e51c Mon Sep 17 00:00:00 2001 From: bubnikv Date: Fri, 29 Dec 2017 21:39:55 +0100 Subject: [PATCH] Bumped up the minimum firmware version of the MK3 printers to 3.1.1-RC4 --- .../profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini | 2 +- resources/profiles/Original Prusa i3 MK3.ini | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini index fca8758e3..0ee20e8ea 100644 --- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini +++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini @@ -3666,7 +3666,7 @@ retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 diff --git a/resources/profiles/Original Prusa i3 MK3.ini b/resources/profiles/Original Prusa i3 MK3.ini index 228cdb130..e82c7c3cf 100644 --- a/resources/profiles/Original Prusa i3 MK3.ini +++ b/resources/profiles/Original Prusa i3 MK3.ini @@ -3386,7 +3386,7 @@ retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1