Merge remote-tracking branch 'origin/master' into profile_changes_reset

resources/profiles/PrusaResearch.ini

@@ -76,6 +76,7 @@ overhangs = 0
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
+perimeters = 2
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 post_process = 
@@ -100,10 +101,13 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
+support_material_spacing = 2
 support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 45
@@ -140,7 +144,7 @@ support_material_xy_spacing = 150%
 external_perimeter_extrusion_width = 0.61
 extrusion_width = 0.67
 first_layer_extrusion_width = 0.65
-infill_extrusion_width = 0.75
+infill_extrusion_width = 0.7
 perimeter_extrusion_width = 0.65
 solid_infill_extrusion_width = 0.65
 top_infill_extrusion_width = 0.6
@@ -157,7 +161,6 @@ support_material_interface_spacing = 0.1
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
 wipe_tower = 1
 
 [print:*0.05mm*]
@@ -167,7 +170,7 @@ bridge_acceleration = 300
 bridge_flow_ratio = 0.7
 default_acceleration = 500
 external_perimeter_speed = 20
-fill_density = 25%
+fill_density = 20%
 first_layer_acceleration = 500
 gap_fill_speed = 20
 infill_acceleration = 800
@@ -176,30 +179,28 @@ max_print_speed = 80
 small_perimeter_speed = 15
 solid_infill_speed = 30
 support_material_extrusion_width = 0.3
-support_material_interface_spacing = 0.2
 support_material_spacing = 1.5
 layer_height = 0.05
 perimeter_acceleration = 300
 perimeter_speed = 30
 perimeters = 3
-support_material_contact_distance = 0.15
 support_material_speed = 30
 top_solid_infill_speed = 20
 top_solid_layers = 15
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 inherits = *0.05mm*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
 infill_extrusion_width = 0.5
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 inherits = *0.05mm*
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4
 fill_pattern = grid
 top_infill_extrusion_width = 0.4
 
-[print:0.05mm DETAIL 0.25 nozzle]
-inherits = *0.05mm*; *0.25nozzle*
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
+inherits = *0.05mm*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
 external_perimeter_extrusion_width = 0
 extrusion_width = 0.28
@@ -210,13 +211,18 @@ infill_speed = 20
 max_print_speed = 100
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
 small_perimeter_speed = 10
 solid_infill_extrusion_width = 0
 solid_infill_speed = 20
 support_material_speed = 20
 top_infill_extrusion_width = 0
 
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+inherits = *0.05mm*; *0.25nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
+fill_pattern = grid
+top_infill_extrusion_width = 0.4
+
 [print:*0.10mm*]
 inherits = *common*
 bottom_solid_layers = 7
@@ -224,9 +230,6 @@ bridge_flow_ratio = 0.7
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
 layer_height = 0.1
 perimeter_acceleration = 800
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_solid_layers = 9
 
 [print:0.10mm DETAIL]
@@ -236,40 +239,63 @@ external_perimeter_speed = 40
 infill_acceleration = 2000
 infill_speed = 60
 perimeter_speed = 50
-perimeters = 3
 solid_infill_speed = 50
 
 [print:0.10mm DETAIL MK3]
 inherits = *0.10mm*
-bridge_flow_ratio = 0.8
 bridge_speed = 30
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
 infill_speed = 170
-max_print_speed = 170
+max_print_speed = 200
 perimeter_speed = 45
-perimeters = 2
 solid_infill_speed = 170
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
 
 [print:0.10mm DETAIL 0.25 nozzle]
-inherits = *0.10mm*; *0.25nozzle*
+inherits = *0.10mm*
 bridge_acceleration = 600
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
 external_perimeter_speed = 20
-fill_density = 15%
 infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-perimeters = 4
 small_perimeter_speed = 10
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+inherits = *0.10mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 170
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+inherits = *0.10mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 170
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+
 [print:*0.15mm*]
 inherits = *common*
 bottom_solid_layers = 5
@@ -279,29 +305,22 @@ infill_speed = 60
 layer_height = 0.15
 perimeter_acceleration = 800
 perimeter_speed = 50
-perimeters = 3
 solid_infill_speed = 50
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_infill_extrusion_width = 0.4
 top_solid_layers = 7
 
 [print:0.15mm 100mms Linear Advance]
 inherits = *0.15mm*
-bottom_solid_layers = 4
 bridge_flow_ratio = 0.95
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 50
 infill_speed = 100
 max_print_speed = 150
 perimeter_speed = 60
-perimeters = 2
 small_perimeter_speed = 30
 solid_infill_speed = 100
 support_material_speed = 60
 top_solid_infill_speed = 70
-top_solid_layers = 5
 
 [print:0.15mm OPTIMAL]
 inherits = *0.15mm*
@@ -318,44 +337,38 @@ infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-perimeters = 2
 small_perimeter_speed = 10
 solid_infill_speed = 40
 support_material_extrusion_width = 0.2
-support_material_threshold = 35
 top_solid_infill_speed = 30
 
 [print:0.15mm OPTIMAL 0.6 nozzle]
 inherits = *0.15mm*; *0.6nozzle*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-wipe_tower = 1
 
 [print:0.15mm OPTIMAL MK3]
 inherits = *0.15mm*
 bridge_speed = 30
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
 infill_speed = 170
 max_print_speed = 170
 perimeter_speed = 45
-perimeters = 2
 solid_infill_speed = 170
 top_solid_infill_speed = 50
-wipe_tower = 1
 
 [print:0.15mm OPTIMAL SOLUBLE FULL]
 inherits = *0.15mm*; *soluble_support*
-bottom_solid_layers = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 external_perimeter_speed = 25
 notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
 perimeter_speed = 40
 solid_infill_speed = 40
-support_material_xy_spacing = 60%
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 30
+wipe_tower = 1
 
 [print:0.15mm OPTIMAL SOLUBLE INTERFACE]
 inherits = 0.15mm OPTIMAL SOLUBLE FULL
@@ -363,8 +376,20 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 support_material_extruder = 0
 support_material_interface_layers = 3
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+inherits = *0.15mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 [print:*0.20mm*]
 inherits = *common*
 bottom_solid_layers = 4
@@ -375,14 +400,22 @@ infill_speed = 60
 layer_height = 0.2
 perimeter_acceleration = 800
 perimeter_speed = 50
-perimeters = 2
 solid_infill_speed = 50
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_infill_extrusion_width = 0.4
 top_solid_layers = 5
-wipe_tower = 1
+
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+inherits = *0.15mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 
 [print:0.20mm 100mms Linear Advance]
 inherits = *0.20mm*
@@ -399,8 +432,7 @@ top_solid_infill_speed = 70
 [print:0.20mm FAST MK3]
 inherits = *0.20mm*
 bridge_speed = 30
-bridge_flow_ratio = 0.8
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
@@ -416,9 +448,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 
 [print:0.20mm NORMAL 0.6 nozzle]
 inherits = *0.20mm*; *0.6nozzle*
-bridge_flow_ratio = 0.8
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-perimeters = 3
 
 [print:0.20mm NORMAL SOLUBLE FULL]
 inherits = *0.20mm*; *soluble_support*
@@ -435,6 +465,20 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 support_material_extruder = 0
 support_material_interface_layers = 3
 support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+[print:0.20mm FAST 0.6 nozzle MK3]
+inherits = *0.20mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 
 [print:*0.35mm*]
 inherits = *common*
@@ -443,38 +487,28 @@ external_perimeter_extrusion_width = 0.6
 external_perimeter_speed = 40
 first_layer_extrusion_width = 0.75
 infill_acceleration = 2000
-infill_extrusion_width = 0.75
 infill_speed = 60
 layer_height = 0.35
 perimeter_acceleration = 800
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 2
 solid_infill_extrusion_width = 0.65
 solid_infill_speed = 60
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_solid_infill_speed = 50
 top_solid_layers = 4
-wipe_tower = 1
 
 [print:0.35mm FAST]
 inherits = *0.35mm*
 bridge_flow_ratio = 0.95
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 first_layer_extrusion_width = 0.42
-infill_extrusion_width = 0.7
 perimeter_extrusion_width = 0.43
 solid_infill_extrusion_width = 0.7
 top_infill_extrusion_width = 0.43
 
 [print:0.35mm FAST 0.6 nozzle]
 inherits = *0.35mm*; *0.6nozzle*
-bottom_solid_layers = 7
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-perimeters = 3
-top_solid_layers = 9
 
 [print:0.35mm FAST sol full 0.6 nozzle]
 inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
@@ -485,14 +519,14 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 perimeter_speed = 40
 support_material_extrusion_width = 0.55
 support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_with_sheath = 0
+support_material_xy_spacing = 120%
 top_infill_extrusion_width = 0.57
 
 [print:0.35mm FAST sol int 0.6 nozzle]
 inherits = 0.35mm FAST sol full 0.6 nozzle
 support_material_extruder = 0
 support_material_interface_layers = 2
+support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 
 [filament:*common*]
@@ -504,6 +538,7 @@ extrusion_multiplier = 1
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
+filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
 min_print_speed = 5
@@ -534,7 +569,7 @@ disable_fan_first_layers = 3
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #FF8000
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_type = PET
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
@@ -545,19 +580,19 @@ temperature = 240
 
 [filament:*ABS*]
 inherits = *common*
-bed_temperature = 100
+bed_temperature = 110
 bridge_fan_speed = 30
 cooling = 0
 disable_fan_first_layers = 3
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_type = ABS
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
-min_fan_speed = 10
+min_fan_speed = 20
 temperature = 255
 
 [filament:*FLEX*]
@@ -569,6 +604,7 @@ disable_fan_first_layers = 1
 extrusion_multiplier = 1.2
 fan_always_on = 0
 fan_below_layer_time = 100
+filament_colour = #00CA0A
 filament_max_volumetric_speed = 1.5
 filament_type = FLEX
 first_layer_bed_temperature = 50
@@ -581,43 +617,28 @@ temperature = 240
 [filament:ColorFabb Brass Bronze]
 inherits = *PLA*
 compatible_printers_condition = nozzle_diameter[0]>0.35
-extrusion_multiplier = 1.3
+extrusion_multiplier = 1.2
 filament_colour = #804040
 filament_max_volumetric_speed = 10
-min_print_speed = 5
 
 [filament:ColorFabb HT]
-bed_temperature = 105
+inherits = *PET*
+bed_temperature = 110
 bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 1
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
 first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
 [filament:ColorFabb PLA-PHA]
 inherits = *PLA*
-filament_colour = #FF3232
 
 [filament:ColorFabb Woodfil]
 inherits = *PLA*
@@ -632,7 +653,6 @@ temperature = 200
 
 [filament:ColorFabb XT]
 inherits = *PET*
-filament_colour = #FF8000
 filament_type = PLA
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
@@ -653,21 +673,19 @@ inherits = *PET*
 bridge_fan_speed = 40
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #FF8000
 filament_type = NGEN
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
 
 [filament:ColorFabb nGen flex]
-inherits = *flex*
+inherits = *FLEX*
 bed_temperature = 85
 bridge_fan_speed = 40
 cooling = 1
 disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_below_layer_time = 10
-filament_colour = #FF8000
 filament_max_volumetric_speed = 5
 first_layer_bed_temperature = 85
 first_layer_temperature = 260
@@ -677,31 +695,26 @@ temperature = 260
 
 [filament:E3D Edge]
 inherits = *PET*
-filament_colour = #FF8000
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 
 [filament:E3D PC-ABS]
 inherits = *ABS*
-filament_colour = #3A80CA
 first_layer_temperature = 270
 temperature = 270
 
 [filament:Fillamentum ABS]
 inherits = *ABS*
-filament_colour = #3A80CA
 first_layer_temperature = 240
 temperature = 240
 
 [filament:Fillamentum ASA]
+inherits = *ABS*
 fan_always_on = 1
-filament_colour = #3A80CA
 first_layer_temperature = 265
 temperature = 265
 
 [filament:Fillamentum CPE HG100 HM100]
 inherits = *PET*
-disable_fan_first_layers = 1
-filament_colour = #FF8000
 filament_notes = "CPE HG100 , CPE HM100"
 first_layer_bed_temperature = 90
 first_layer_temperature = 275
@@ -733,9 +746,9 @@ filament_notes = "List of materials tested with standart PLA print settings for
 
 [filament:Polymaker PC-Max]
 inherits = *ABS*
-bed_temperature = 120
+bed_temperature = 115
 filament_colour = #3A80CA
-first_layer_bed_temperature = 120
+first_layer_bed_temperature = 100
 first_layer_temperature = 270
 temperature = 270
 
@@ -778,38 +791,28 @@ filament_notes = "List of manufacturers tested with standart PET print settings
 
 [filament:Prusa PLA]
 inherits = *PLA*
-filament_colour = #FF3232
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 
 [filament:SemiFlex or Flexfill 98A]
-inherits = *flex*
+inherits = *FLEX*
 
 [filament:Taulman Bridge]
-bed_temperature = 50
+inherits = *common*
+bed_temperature = 90
 bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 0
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
 filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
+filament_type = PET
+first_layer_bed_temperature = 60
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
 
@@ -818,7 +821,6 @@ inherits = *PET*
 bridge_fan_speed = 40
 cooling = 0
 fan_always_on = 0
-filament_colour = #FF8000
 first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
@@ -826,23 +828,17 @@ min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
 [filament:Verbatim BVOH]
+inherits = *common*
 bed_temperature = 60
 bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 0
 disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 100
 filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 10
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
 filament_soluble = 1
 filament_type = PLA
 first_layer_bed_temperature = 60
@@ -850,36 +846,27 @@ first_layer_temperature = 215
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
 [filament:Verbatim PP]
+inherits = *common*
 bed_temperature = 100
 bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 1
 disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 5
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
 filament_type = PLA
 first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
@@ -904,7 +891,7 @@ retract_before_travel = 1
 retract_before_wipe = 0%
 retract_layer_change = 1
 retract_length = 0.8
-retract_length_toolchange = 3
+retract_length_toolchange = 4
 retract_lift = 0.6
 retract_lift_above = 0
 retract_lift_below = 199
@@ -934,7 +921,6 @@ retract_before_travel = 3
 retract_before_wipe = 60%
 retract_layer_change = 0
 retract_length = 4
-retract_length_toolchange = 4
 retract_lift = 0.6
 retract_lift_above = 0
 retract_lift_below = 199
@@ -1005,3 +991,23 @@ retract_lift_below = 209
 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
 printer_model = MK3
 default_print_profile = 0.15mm OPTIMAL MK3
+
+[printer:Original Prusa i3 MK3 0.25 nozzle]
+inherits = *common*
+nozzle_diameter = 0.25
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_lift_below = 209
+start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+printer_model = MK3
+default_print_profile = 0.10mm DETAIL MK3
+
+[printer:Original Prusa i3 MK3 0.6 nozzle]
+inherits = *common*
+nozzle_diameter = 0.6
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_lift_below = 209
+start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+printer_model = MK3
+default_print_profile = 0.15mm OPTIMAL MK3