3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Some more beautifications

Browse source
This commit is contained in:
Lukas Matena 2022-01-05 10:00:35 +01:00
parent 85f98b880a
commit da8e4b6fda
2 changed files with 13 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

12
src/libslic3r/GCode.cpp
View file

@ -1694,11 +1694,12 @@ void GCode::print_machine_envelope(GCodeOutputStream &file, Print &print)
int(print.config().machine_max_acceleration_y.values.front() + 0.5),
int(print.config().machine_max_acceleration_z.values.front() + 0.5),
int(print.config().machine_max_acceleration_e.values.front() + 0.5));
file.write_format("M203 X%d Y%d Z%d E%d ; sets maximum feedrates, mm/sec (or mm/min for RRF)\n",
file.write_format("M203 X%d Y%d Z%d E%d ; sets maximum feedrates, %s\n",
int(print.config().machine_max_feedrate_x.values.front() * factor + 0.5),
int(print.config().machine_max_feedrate_y.values.front() * factor + 0.5),
int(print.config().machine_max_feedrate_z.values.front() * factor + 0.5),
int(print.config().machine_max_feedrate_e.values.front() * factor + 0.5));
int(print.config().machine_max_feedrate_e.values.front() * factor + 0.5),
factor == 60 ? "mm / min" : "mm / sec");
// Now M204 - acceleration. This one is quite hairy thanks to how Marlin guys care about
// backwards compatibility: https://github.com/prusa3d/PrusaSlicer/issues/1089
@ -1707,7 +1708,7 @@ void GCode::print_machine_envelope(GCodeOutputStream &file, Print &print)
int travel_acc = flavor == gcfMarlinLegacy
? int(print.config().machine_max_acceleration_extruding.values.front() + 0.5)
: int(print.config().machine_max_acceleration_travel.values.front() + 0.5);
// Retract acceleration not accepeted in M204 in RRF
// Retract acceleration not accepted in M204 in RRF
if (flavor == gcfRepRapFirmware)
file.write_format("M204 P%d T%d ; sets acceleration (P, T), mm/sec^2\n",
int(print.config().machine_max_acceleration_extruding.values.front() + 0.5),
@ -1726,11 +1727,14 @@ void GCode::print_machine_envelope(GCodeOutputStream &file, Print &print)
print.config().machine_max_jerk_y.values.front() * factor,
print.config().machine_max_jerk_z.values.front() * factor,
print.config().machine_max_jerk_e.values.front() * factor);
// M205 Sn Tn not supported in RRF
if (flavor != gcfRepRapFirmware)
file.write_format("M205 S%d T%d ; sets the minimum extruding and travel feed rate, mm/sec\n",
int(print.config().machine_min_extruding_rate.values.front() + 0.5),
int(print.config().machine_min_travel_rate.values.front() + 0.5));
else {
// M205 Sn Tn not supported in RRF. They use M203 Inn to set minimum feedrate for
// all moves. This is currently not implemented.
}
}
}