3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Fixed ooze prevention test as well

Browse source
This commit is contained in:
Alessandro Ranellucci 2014-12-29 01:37:34 +01:00
parent 0b77fe743c
commit de2fd9721c
1 changed files with 30 additions and 9 deletions

39
t/multi.t
View file

@ -17,23 +17,25 @@ use Slic3r::Test;
my $config = Slic3r::Config->new_from_defaults; my $config = Slic3r::Config->new_from_defaults;
$config->set('raft_layers', 2); $config->set('raft_layers', 2);
$config->set('infill_extruder', 2); $config->set('infill_extruder', 2);
$config->set('support_material_extruder', 3); $config->set('solid_infill_extruder', 3);
$config->set('support_material_extruder', 4);
$config->set('ooze_prevention', 1); $config->set('ooze_prevention', 1);
$config->set('extruder_offset', [ [0,0], [20,0], [0,20] ]); $config->set('extruder_offset', [ [0,0], [20,0], [0,20], [20,20] ]);
$config->set('temperature', [200, 180, 170]); $config->set('temperature', [200, 180, 170, 160]);
$config->set('first_layer_temperature', [206, 186, 166]); $config->set('first_layer_temperature', [206, 186, 166, 156]);
$config->set('toolchange_gcode', ';toolchange'); # test that it doesn't crash when this is supplied $config->set('toolchange_gcode', ';toolchange'); # test that it doesn't crash when this is supplied
my $print = Slic3r::Test::init_print('20mm_cube', config => $config); my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
my $tool = undef; my $tool = undef;
my @tool_temp = (0,0,0); my @tool_temp = (0,0,0,0);
my @toolchange_points = (); my @toolchange_points = ();
my @extrusion_points = (); my @extrusion_points = ();
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub { Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
my ($self, $cmd, $args, $info) = @_; my ($self, $cmd, $args, $info) = @_;
if ($cmd =~ /^T(\d+)/) { if ($cmd =~ /^T(\d+)/) {
# ignore initial toolchange
if (defined $tool) { if (defined $tool) {
my $expected_temp = $self->Z == ($config->get_value('first_layer_height') + $config->z_offset) my $expected_temp = $self->Z == ($config->get_value('first_layer_height') + $config->z_offset)
? $config->first_layer_temperature->[$tool] ? $config->first_layer_temperature->[$tool]
@ -41,8 +43,8 @@ use Slic3r::Test;
die 'standby temperature was not set before toolchange' die 'standby temperature was not set before toolchange'
if $tool_temp[$tool] != $expected_temp + $config->standby_temperature_delta; if $tool_temp[$tool] != $expected_temp + $config->standby_temperature_delta;
# ignore initial toolchange push @toolchange_points, my $point = Slic3r::Point->new_scale($self->X, $self->Y);
push @toolchange_points, Slic3r::Point->new_scale($self->X, $self->Y); $point->translate(map +scale($_), @{ $config->extruder_offset->[$tool] });
} }
$tool = $1; $tool = $1;
} elsif ($cmd eq 'M104' || $cmd eq 'M109') { } elsif ($cmd eq 'M104' || $cmd eq 'M109') {
@ -54,11 +56,30 @@ use Slic3r::Test;
$tool_temp[$t] = $args->{S}; $tool_temp[$t] = $args->{S};
} elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) { } elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) {
push @extrusion_points, my $point = Slic3r::Point->new_scale($args->{X}, $args->{Y}); push @extrusion_points, my $point = Slic3r::Point->new_scale($args->{X}, $args->{Y});
$point->translate(map scale($_), @{ $config->extruder_offset->[$tool] }); $point->translate(map +scale($_), @{ $config->extruder_offset->[$tool] });
} }
}); });
my $convex_hull = convex_hull(\@extrusion_points); my $convex_hull = convex_hull(\@extrusion_points);
ok !(defined first { $convex_hull->contains_point($_) } @toolchange_points), 'all toolchanges happen outside skirt';
my @t = ();
foreach my $point (@toolchange_points) {
foreach my $offset (@{$config->extruder_offset}) {
push @t, my $p = $point->clone;
$p->translate(map +scale($_), @$offset);
}
}
ok !(defined first { $convex_hull->contains_point($_) } @t), 'all nozzles are outside skirt at toolchange';
if (0) {
require "Slic3r/SVG.pm";
Slic3r::SVG::output(
"ooze_prevention.svg",
no_arrows => 1,
polygons => [$convex_hull],
points => \@toolchange_points,
red_points => \@t,
);
}
# offset the skirt by the maximum displacement between extruders plus a safety extra margin # offset the skirt by the maximum displacement between extruders plus a safety extra margin
my $delta = scale(20 * sqrt(2) + 1); my $delta = scale(20 * sqrt(2) + 1);