3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Ported test_gcodewriter from upstream Slic3r, thanks @lordofhyphens.

Browse source 
The format for G1 Fxxx was changed to fixed three decimal digits.
This commit is contained in:
bubnikv 2019-10-15 17:35:19 +02:00
parent 88df291372
commit de45be5f29
5 changed files with 156 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

30
tests/data/fff_print_tests/test_gcodewriter/config_lift_unlift.ini Normal file
View file

@ -0,0 +1,30 @@
before_layer_gcode =
between_objects_gcode =
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
extrusion_axis = E
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 3
filament_max_volumetric_speed = 0
gcode_comments = 0
gcode_flavor = reprap
layer_gcode =
max_print_speed = 80
max_volumetric_speed = 0
retract_length = 2
retract_length_toolchange = 10
retract_lift = 1.5
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
start_filament_gcode = "; Filament gcode\n"
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode =
travel_speed = 130
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0