diff --git a/resources/profiles/Rigid3D.idx b/resources/profiles/Rigid3D.idx
index 21c2f4b0c..dd7ebab60 100644
--- a/resources/profiles/Rigid3D.idx
+++ b/resources/profiles/Rigid3D.idx
@@ -1,3 +1,5 @@
+min_slic3r_version = 2.6.0-alpha5
+1.0.1 General rework. Fix start gcodes.
 min_slic3r_version = 2.6.0-alpha0
 1.0.0 Initial Rigid3D bundle
 
diff --git a/resources/profiles/Rigid3D.ini b/resources/profiles/Rigid3D.ini
index 058386293..e33e79e3b 100644
--- a/resources/profiles/Rigid3D.ini
+++ b/resources/profiles/Rigid3D.ini
@@ -5,7 +5,7 @@
 name = Rigid3D
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 1.0.1
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -64,7 +64,7 @@ bridge_angle = 0
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_separation = 0
-brim_type = no_brim
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers =
@@ -75,19 +75,19 @@ dont_support_bridges = 1
 draft_shield = disabled
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0
 external_perimeter_speed = 50%
 external_perimeters_first = 1
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.45
+extrusion_width = 0
 fill_angle = 45
 fill_density = 10%
 fill_pattern = line
 first_layer_acceleration = 0
 first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.42
+first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 50%
 first_layer_speed_over_raft = 30
@@ -105,8 +105,8 @@ infill_anchor = 2.5
 infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 1
+infill_extrusion_width = 0
+infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 60
@@ -124,11 +124,11 @@ mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
+perimeter_extrusion_width = 0
 perimeter_speed = 60
 perimeters = 2
 post_process = 
@@ -139,7 +139,7 @@ raft_first_layer_density = 90%
 raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = rear
+seam_position = random
 single_extruder_multi_material_priming = 1
 skirt_distance = 6
 skirt_height = 1
@@ -147,14 +147,14 @@ skirts = 0
 slice_closing_radius = 0.049
 slicing_mode = regular
 small_perimeter_speed = 15
-solid_infill_below_area = 70
+solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0
 solid_infill_speed = 100%
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_auto = 1
 support_material_bottom_contact_distance = 0
@@ -164,7 +164,7 @@ support_material_closing_radius = 2
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
@@ -174,7 +174,7 @@ support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_speed = 60
-support_material_style = grid
+support_material_style = organic
 support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1
@@ -182,7 +182,7 @@ support_material_xy_spacing = 50%
 thick_bridges = 0
 thin_walls = 1
 top_fill_pattern = monotonic
-top_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0
 top_solid_infill_speed = 100%
 top_solid_min_thickness = 0.8
 travel_speed = 80
@@ -408,7 +408,7 @@ pause_print_gcode = M0
 printer_settings_id = 
 printer_technology = FFF
 printer_variant = 0.4
-remaining_times = 1
+remaining_times = 0
 retract_before_travel = 2
 retract_before_wipe = 0%
 retract_layer_change = 0
@@ -438,7 +438,7 @@ bed_shape = 0x0,200x0,200x200,0x200
 max_print_height = 190
 printer_model = Zero2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO2\nPRINTER_HAS_HEATEDBED\n
-start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
 end_gcode = G1 X0 Y180\nM107\nG91\nG0 Z20\nT0\nG1 E-1\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
 
 [printer:Rigid3D Zero3]
@@ -447,7 +447,7 @@ bed_shape = 0x0,200x0,200x200,0x200
 max_print_height = 200
 printer_model = Zero3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO3\nPRINTER_HAS_HEATEDBED\n
-start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
 end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n
 
 [printer:Rigid3D Mucit]
@@ -456,7 +456,7 @@ bed_shape = 0x0,150x0,150x150,0x150
 max_print_height = 150
 printer_model = Mucit
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT\n
-start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
 end_gcode = G1 X0 Y140\nM107\nG91\nG0 Z20\nT0\nG1 E-2\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n
 
 [printer:Rigid3D Mucit2]
@@ -465,5 +465,5 @@ bed_shape = 0x0,150x0,150x150,0x150
 max_print_height = 150
 printer_model = Mucit2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
-start_gcode = G21\nG92 E0\nG28\nM420 S1\nM107\nG90\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
+start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
 end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n