Added resources and settings for Anycubic Photon Mono X SLA printer

resources/profiles/Anycubic.ini

@@ -64,6 +64,13 @@ technology = FFF
 family = PREDATOR
 default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
 
+[printer_model:PHOTON MONO X]
+name = Photon Mono X
+variants = default
+technology = SLA
+family = PHOTON MONO
+default_materials = Generic Blue Resin MONO @0.05
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -1898,3 +1905,96 @@ default_print_profile = 0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR
 #########################################
 ########## end printer presets ##########
 #########################################
+
+#########################################
+########## SLA printer presets ##########
+#########################################
+
+
+[sla_print:*common print ANYCUBIC SLA*]
+compatible_printers_condition = family=="PHOTON MONO"
+layer_height = 0.05
+output_filename_format = [input_filename_base].pwmx
+pad_edge_radius = 0.5
+pad_enable = 0
+pad_max_merge_distance = 50
+pad_wall_height = 0
+pad_wall_thickness = 1
+pad_wall_slope = 45
+faded_layers = 8
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_critical_angle = 45
+support_density_at_45 = 250
+support_density_at_horizontal = 500
+support_head_front_diameter = 0.4
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_minimal_z = 0
+support_object_elevation = 5
+support_pillar_diameter = 1
+support_pillar_connection_mode = zigzag
+support_pillar_widening_factor = 0
+supports_enable = 1
+support_small_pillar_diameter_percent = 60%
+
+[sla_print:0.05 ANYCUBIC SLA]
+inherits = *common print ANYCUBIC SLA*
+layer_height = 0.05
+
+
+########### Materials
+
+[sla_material:*common ANYCUBIC SLA*]
+compatible_printers_condition = family=="PHOTON MONO"
+compatible_prints_condition = layer_height == 0.05
+exposure_time = 7
+initial_exposure_time = 40
+initial_layer_height = 0.05
+material_correction = 1,1,1
+material_notes = LIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5
+
+[sla_material:*common 0.05 ANYCUBIC SLA*]
+inherits = *common ANYCUBIC SLA*
+
+[sla_material:Generic Blue Resin MONO @0.05]
+inherits = *common 0.05 ANYCUBIC SLA*
+exposure_time = 2.5
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Generic
+material_colour = #6080EC
+
+########## Printers
+
+[printer:Anycubic Photon Mono X]
+printer_technology = SLA
+printer_model = PHOTON MONO X
+printer_variant = default
+default_sla_material_profile = Generic Blue Resin MONO @0.05
+default_sla_print_profile = 0.05 ANYCUBIC SLA
+thumbnails = 224x168
+sla_archive_format = pwmx
+bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
+display_height = 120
+display_orientation = landscape
+display_mirror_x = 1
+display_mirror_y = 0
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 192
+max_print_height = 245
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+gamma_correction = 1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\n
+
+