diff --git a/resources/profiles/Ultimaker.idx b/resources/profiles/Ultimaker.idx
index a593d2fb4..8e119931c 100644
--- a/resources/profiles/Ultimaker.idx
+++ b/resources/profiles/Ultimaker.idx
@@ -1,2 +1,3 @@
 min_slic3r_version = 2.4.0-beta0
+1.0.1 Updated start g-code.
 1.0.0 Initial version
diff --git a/resources/profiles/Ultimaker.ini b/resources/profiles/Ultimaker.ini
index 363e0dec8..1aeeab0a1 100644
--- a/resources/profiles/Ultimaker.ini
+++ b/resources/profiles/Ultimaker.ini
@@ -9,7 +9,7 @@ name = Ultimaker
 
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 1.0.1
 
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
@@ -396,5 +396,5 @@ printer_notes = Dont remove the following keywords! These keywords are used in t
 nozzle_diameter = 0.4
 default_print_profile = 0.20mm NORMAL @ULTIMAKER2
 default_filament_profile = Generic PLA @ULTIMAKER2
-start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 		; metric values\nG90 		; absolute positioning\nM82 		; set extruder to absolute mode\nM107 		; start with the fan off\n\nG28 X0 Y0 Z0	; move X/Y/Z to endstops\nG1 X1 Y6 F15000	; move X/Y to start position\nG1 Z35 F9000	; move Z to start position\n\n; Heat up bed and nozzle\nM190 S{first_layer_bed_temperature[0] - 5}	; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature]	; continue bed heating\nM109 S[first_layer_temperature]	; wait for nozzle temperature\n\nG92 E0		; zero the extruded length\nG1 F150 E22	; purge nozzle with filament\nG92 E0		; zero the extruded length again\nG1 F75 E7	; additional priming\nG92 E0		; zero the extruded length again\n\n; # # # # # # END Header
+start_gcode = start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 		; metric values\nG90 		; absolute positioning\nM82 		; set extruder to absolute mode\nM107 		; start with the fan off\n\nM140 S[first_layer_bed_temperature]	; start bed heating\n\nG28 X0 Y0 Z0	; move X/Y/Z to endstops\nG1 X1 Y6 F15000	; move X/Y to start position\nG1 Z35 F9000	; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5}	; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature]	; continue bed heating\nM109 S[first_layer_temperature]	; wait for nozzle temperature\n\n; Purge and prime\nM83 		; set extruder to relative mode\nG92 E0           ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 Y10  ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000    \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50         ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000  ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600        ; drag filament to decompress bowden tube\nG1 X100 F3200       ; wipe backwards a bit\nG1 X150 F3200       ; back to where there is no plastic: avoid dragging\nG92 E0           ; reset extruder reference\nM82 		; set extruder to absolute mode\n\n; # # # # # # END Header
 end_gcode = ; # # # # # # START Footer\nG91 			; relative coordinates\n;G1 E-1 F1200		; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000		; move Z a bit\n; G1 X-10 Y-10 F6000	; move XY a bit\nG1 E-5.5 F300		; retract the filament\nG28 X0 Y0		; move X/Y to min endstops, so the head is out of the way\nM104 S0			; extruder heater off\nM140 S0			; heated bed heater off (if you have it)\nM84 			; disable motors\n; # # # # # # END Footer\n