From dfd6ca899a37fabd2ed8f6ed526fd8e60575e01a Mon Sep 17 00:00:00 2001 From: rtyr <36745189+rtyr@users.noreply.github.com> Date: Thu, 17 Mar 2022 13:41:08 +0100 Subject: [PATCH] Sync with PrusaSlicer-settings --- resources/profiles/Ultimaker.idx | 1 + resources/profiles/Ultimaker.ini | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/resources/profiles/Ultimaker.idx b/resources/profiles/Ultimaker.idx index a593d2fb4..8e119931c 100644 --- a/resources/profiles/Ultimaker.idx +++ b/resources/profiles/Ultimaker.idx @@ -1,2 +1,3 @@ min_slic3r_version = 2.4.0-beta0 +1.0.1 Updated start g-code. 1.0.0 Initial version diff --git a/resources/profiles/Ultimaker.ini b/resources/profiles/Ultimaker.ini index 363e0dec8..1aeeab0a1 100644 --- a/resources/profiles/Ultimaker.ini +++ b/resources/profiles/Ultimaker.ini @@ -9,7 +9,7 @@ name = Ultimaker # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.0.0 +config_version = 1.0.1 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/ @@ -396,5 +396,5 @@ printer_notes = Dont remove the following keywords! These keywords are used in t nozzle_diameter = 0.4 default_print_profile = 0.20mm NORMAL @ULTIMAKER2 default_filament_profile = Generic PLA @ULTIMAKER2 -start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Heat up bed and nozzle\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\nG92 E0 ; zero the extruded length\nG1 F150 E22 ; purge nozzle with filament\nG92 E0 ; zero the extruded length again\nG1 F75 E7 ; additional priming\nG92 E0 ; zero the extruded length again\n\n; # # # # # # END Header +start_gcode = start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nM140 S[first_layer_bed_temperature] ; start bed heating\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\n; Purge and prime\nM83 ; set extruder to relative mode\nG92 E0 ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 Y10 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000 \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50 ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000 ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600 ; drag filament to decompress bowden tube\nG1 X100 F3200 ; wipe backwards a bit\nG1 X150 F3200 ; back to where there is no plastic: avoid dragging\nG92 E0 ; reset extruder reference\nM82 ; set extruder to absolute mode\n\n; # # # # # # END Header end_gcode = ; # # # # # # START Footer\nG91 ; relative coordinates\n;G1 E-1 F1200 ; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000 ; move Z a bit\n; G1 X-10 Y-10 F6000 ; move XY a bit\nG1 E-5.5 F300 ; retract the filament\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nM104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nM84 ; disable motors\n; # # # # # # END Footer\n